| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Driver for GE FPGA based GPIO | |
| * | |
| * Author: Martyn Welch <martyn.welch@ge.com> | |
| * | |
| * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. | |
| */ | |
| /* | |
| * TODO: | |
| * | |
| * Configuration of output modes (totem-pole/open-drain). | |
| * Interrupt configuration - interrupts are always generated, the FPGA relies | |
| * on the I/O interrupt controllers mask to stop them from being propagated. | |
| */ | |
| #include <linux/gpio/driver.h> | |
| #include <linux/gpio/generic.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/property.h> | |
| #include <linux/slab.h> | |
| #define GEF_GPIO_DIRECT 0x00 | |
| #define GEF_GPIO_IN 0x04 | |
| #define GEF_GPIO_OUT 0x08 | |
| #define GEF_GPIO_TRIG 0x0C | |
| #define GEF_GPIO_POLAR_A 0x10 | |
| #define GEF_GPIO_POLAR_B 0x14 | |
| #define GEF_GPIO_INT_STAT 0x18 | |
| #define GEF_GPIO_OVERRUN 0x1C | |
| #define GEF_GPIO_MODE 0x20 | |
| static const struct of_device_id gef_gpio_ids[] = { | |
| { | |
| .compatible = "gef,sbc610-gpio", | |
| .data = (void *)19, | |
| }, { | |
| .compatible = "gef,sbc310-gpio", | |
| .data = (void *)6, | |
| }, { | |
| .compatible = "ge,imp3a-gpio", | |
| .data = (void *)16, | |
| }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, gef_gpio_ids); | |
| static int __init gef_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct gpio_generic_chip_config config; | |
| struct device *dev = &pdev->dev; | |
| struct gpio_generic_chip *chip; | |
| struct gpio_chip *gc; | |
| void __iomem *regs; | |
| int ret; | |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); | |
| if (!chip) | |
| return -ENOMEM; | |
| regs = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(regs)) | |
| return PTR_ERR(regs); | |
| config = (struct gpio_generic_chip_config) { | |
| .dev = dev, | |
| .sz = 4, | |
| .dat = regs + GEF_GPIO_IN, | |
| .set = regs + GEF_GPIO_OUT, | |
| .dirin = regs + GEF_GPIO_DIRECT, | |
| .flags = GPIO_GENERIC_BIG_ENDIAN_BYTE_ORDER, | |
| }; | |
| ret = gpio_generic_chip_init(chip, &config); | |
| if (ret) | |
| return dev_err_probe(dev, ret, | |
| "failed to initialize the generic GPIO chip\n"); | |
| gc = &chip->gc; | |
| /* Setup pointers to chip functions */ | |
| gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pfw", dev_fwnode(dev)); | |
| if (!gc->label) | |
| return -ENOMEM; | |
| gc->base = -1; | |
| gc->ngpio = (uintptr_t)device_get_match_data(dev); | |
| /* This function adds a memory mapped GPIO chip */ | |
| ret = devm_gpiochip_add_data(dev, gc, NULL); | |
| if (ret) | |
| return dev_err_probe(dev, ret, "GPIO chip registration failed\n"); | |
| return 0; | |
| }; | |
| static struct platform_driver gef_gpio_driver = { | |
| .driver = { | |
| .name = "gef-gpio", | |
| .of_match_table = gef_gpio_ids, | |
| }, | |
| }; | |
| module_platform_driver_probe(gef_gpio_driver, gef_gpio_probe); | |
| MODULE_DESCRIPTION("GE I/O FPGA GPIO driver"); | |
| MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>"); | |
| MODULE_LICENSE("GPL"); |