| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * GPIO latch driver | |
| * | |
| * Copyright (C) 2022 Sascha Hauer <s.hauer@pengutronix.de> | |
| * | |
| * This driver implements a GPIO (or better GPO as there is no input) | |
| * multiplexer based on latches like this: | |
| * | |
| * CLK0 ----------------------. ,--------. | |
| * CLK1 -------------------. `--------|> #0 | | |
| * | | | | |
| * OUT0 ----------------+--|-----------|D0 Q0|-----|< | |
| * OUT1 --------------+-|--|-----------|D1 Q1|-----|< | |
| * OUT2 ------------+-|-|--|-----------|D2 Q2|-----|< | |
| * OUT3 ----------+-|-|-|--|-----------|D3 Q3|-----|< | |
| * OUT4 --------+-|-|-|-|--|-----------|D4 Q4|-----|< | |
| * OUT5 ------+-|-|-|-|-|--|-----------|D5 Q5|-----|< | |
| * OUT6 ----+-|-|-|-|-|-|--|-----------|D6 Q6|-----|< | |
| * OUT7 --+-|-|-|-|-|-|-|--|-----------|D7 Q7|-----|< | |
| * | | | | | | | | | `--------' | |
| * | | | | | | | | | | |
| * | | | | | | | | | ,--------. | |
| * | | | | | | | | `-----------|> #1 | | |
| * | | | | | | | | | | | |
| * | | | | | | | `--------------|D0 Q0|-----|< | |
| * | | | | | | `----------------|D1 Q1|-----|< | |
| * | | | | | `------------------|D2 Q2|-----|< | |
| * | | | | `--------------------|D3 Q3|-----|< | |
| * | | | `----------------------|D4 Q4|-----|< | |
| * | | `------------------------|D5 Q5|-----|< | |
| * | `--------------------------|D6 Q6|-----|< | |
| * `----------------------------|D7 Q7|-----|< | |
| * `--------' | |
| * | |
| * The above is just an example. The actual number of number of latches and | |
| * the number of inputs per latch is derived from the number of GPIOs given | |
| * in the corresponding device tree properties. | |
| */ | |
| #include <linux/cleanup.h> | |
| #include <linux/err.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/property.h> | |
| #include <linux/delay.h> | |
| struct gpio_latch_priv { | |
| struct gpio_chip gc; | |
| struct gpio_descs *clk_gpios; | |
| struct gpio_descs *latched_gpios; | |
| int n_latched_gpios; | |
| unsigned int setup_duration_ns; | |
| unsigned int clock_duration_ns; | |
| unsigned long *shadow; | |
| /* | |
| * Depending on whether any of the underlying GPIOs may sleep we either | |
| * use a mutex or a spinlock to protect our shadow map. | |
| */ | |
| union { | |
| struct mutex mutex; /* protects @shadow */ | |
| spinlock_t spinlock; /* protects @shadow */ | |
| }; | |
| }; | |
| static int gpio_latch_get_direction(struct gpio_chip *gc, unsigned int offset) | |
| { | |
| return GPIO_LINE_DIRECTION_OUT; | |
| } | |
| static int gpio_latch_set_unlocked(struct gpio_latch_priv *priv, | |
| int (*set)(struct gpio_desc *desc, int value), | |
| unsigned int offset, bool val) | |
| { | |
| int latch = offset / priv->n_latched_gpios, i, ret; | |
| assign_bit(offset, priv->shadow, val); | |
| for (i = 0; i < priv->n_latched_gpios; i++) { | |
| ret = set(priv->latched_gpios->desc[i], | |
| test_bit(latch * priv->n_latched_gpios + i, | |
| priv->shadow)); | |
| if (ret) | |
| return ret; | |
| } | |
| ndelay(priv->setup_duration_ns); | |
| set(priv->clk_gpios->desc[latch], 1); | |
| ndelay(priv->clock_duration_ns); | |
| set(priv->clk_gpios->desc[latch], 0); | |
| return 0; | |
| } | |
| static int gpio_latch_set(struct gpio_chip *gc, unsigned int offset, int val) | |
| { | |
| struct gpio_latch_priv *priv = gpiochip_get_data(gc); | |
| guard(spinlock_irqsave)(&priv->spinlock); | |
| return gpio_latch_set_unlocked(priv, gpiod_set_value, offset, val); | |
| } | |
| static int gpio_latch_set_can_sleep(struct gpio_chip *gc, unsigned int offset, int val) | |
| { | |
| struct gpio_latch_priv *priv = gpiochip_get_data(gc); | |
| guard(mutex)(&priv->mutex); | |
| return gpio_latch_set_unlocked(priv, gpiod_set_value_cansleep, offset, val); | |
| } | |
| static bool gpio_latch_can_sleep(struct gpio_latch_priv *priv, unsigned int n_latches) | |
| { | |
| int i; | |
| for (i = 0; i < n_latches; i++) | |
| if (gpiod_cansleep(priv->clk_gpios->desc[i])) | |
| return true; | |
| for (i = 0; i < priv->n_latched_gpios; i++) | |
| if (gpiod_cansleep(priv->latched_gpios->desc[i])) | |
| return true; | |
| return false; | |
| } | |
| /* | |
| * Some value which is still acceptable to delay in atomic context. | |
| * If we need to go higher we might have to switch to usleep_range(), | |
| * but that cannot ne used in atomic context and the driver would have | |
| * to be adjusted to support that. | |
| */ | |
| #define DURATION_NS_MAX 5000 | |
| static int gpio_latch_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct gpio_latch_priv *priv; | |
| unsigned int n_latches; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->clk_gpios = devm_gpiod_get_array(dev, "clk", GPIOD_OUT_LOW); | |
| if (IS_ERR(priv->clk_gpios)) | |
| return PTR_ERR(priv->clk_gpios); | |
| priv->latched_gpios = devm_gpiod_get_array(dev, "latched", GPIOD_OUT_LOW); | |
| if (IS_ERR(priv->latched_gpios)) | |
| return PTR_ERR(priv->latched_gpios); | |
| n_latches = priv->clk_gpios->ndescs; | |
| priv->n_latched_gpios = priv->latched_gpios->ndescs; | |
| priv->shadow = devm_bitmap_zalloc(dev, n_latches * priv->n_latched_gpios, | |
| GFP_KERNEL); | |
| if (!priv->shadow) | |
| return -ENOMEM; | |
| if (gpio_latch_can_sleep(priv, n_latches)) { | |
| priv->gc.can_sleep = true; | |
| priv->gc.set = gpio_latch_set_can_sleep; | |
| mutex_init(&priv->mutex); | |
| } else { | |
| priv->gc.can_sleep = false; | |
| priv->gc.set = gpio_latch_set; | |
| spin_lock_init(&priv->spinlock); | |
| } | |
| device_property_read_u32(dev, "setup-duration-ns", | |
| &priv->setup_duration_ns); | |
| if (priv->setup_duration_ns > DURATION_NS_MAX) { | |
| dev_warn(dev, "setup-duration-ns too high, limit to %d\n", | |
| DURATION_NS_MAX); | |
| priv->setup_duration_ns = DURATION_NS_MAX; | |
| } | |
| device_property_read_u32(dev, "clock-duration-ns", | |
| &priv->clock_duration_ns); | |
| if (priv->clock_duration_ns > DURATION_NS_MAX) { | |
| dev_warn(dev, "clock-duration-ns too high, limit to %d\n", | |
| DURATION_NS_MAX); | |
| priv->clock_duration_ns = DURATION_NS_MAX; | |
| } | |
| priv->gc.get_direction = gpio_latch_get_direction; | |
| priv->gc.ngpio = n_latches * priv->n_latched_gpios; | |
| priv->gc.owner = THIS_MODULE; | |
| priv->gc.base = -1; | |
| priv->gc.parent = dev; | |
| platform_set_drvdata(pdev, priv); | |
| return devm_gpiochip_add_data(dev, &priv->gc, priv); | |
| } | |
| static const struct of_device_id gpio_latch_ids[] = { | |
| { | |
| .compatible = "gpio-latch", | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, gpio_latch_ids); | |
| static struct platform_driver gpio_latch_driver = { | |
| .driver = { | |
| .name = "gpio-latch", | |
| .of_match_table = gpio_latch_ids, | |
| }, | |
| .probe = gpio_latch_probe, | |
| }; | |
| module_platform_driver(gpio_latch_driver); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); | |
| MODULE_DESCRIPTION("GPIO latch driver"); |