| // SPDX-License-Identifier: GPL-2.0+ | |
| // | |
| // MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> | |
| // Copyright 2008 Juergen Beisert, kernel@pengutronix.de | |
| // | |
| // Based on code from Freescale Semiconductor, | |
| // Authors: Daniel Mack, Juergen Beisert. | |
| // Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. | |
| #include <linux/cleanup.h> | |
| #include <linux/clk.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/irqchip/chained_irq.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/syscore_ops.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/gpio/generic.h> | |
| #include <linux/of.h> | |
| #include <linux/bug.h> | |
| #define IMX_SCU_WAKEUP_OFF 0 | |
| #define IMX_SCU_WAKEUP_LOW_LVL 4 | |
| #define IMX_SCU_WAKEUP_FALL_EDGE 5 | |
| #define IMX_SCU_WAKEUP_RISE_EDGE 6 | |
| #define IMX_SCU_WAKEUP_HIGH_LVL 7 | |
| /* device type dependent stuff */ | |
| struct mxc_gpio_hwdata { | |
| unsigned dr_reg; | |
| unsigned gdir_reg; | |
| unsigned psr_reg; | |
| unsigned icr1_reg; | |
| unsigned icr2_reg; | |
| unsigned imr_reg; | |
| unsigned isr_reg; | |
| int edge_sel_reg; | |
| unsigned low_level; | |
| unsigned high_level; | |
| unsigned rise_edge; | |
| unsigned fall_edge; | |
| }; | |
| struct mxc_gpio_reg_saved { | |
| u32 icr1; | |
| u32 icr2; | |
| u32 imr; | |
| u32 gdir; | |
| u32 edge_sel; | |
| u32 dr; | |
| }; | |
| struct mxc_gpio_port { | |
| struct list_head node; | |
| void __iomem *base; | |
| struct clk *clk; | |
| int irq; | |
| int irq_high; | |
| void (*mx_irq_handler)(struct irq_desc *desc); | |
| struct irq_domain *domain; | |
| struct gpio_generic_chip gen_gc; | |
| struct device *dev; | |
| u32 both_edges; | |
| struct mxc_gpio_reg_saved gpio_saved_reg; | |
| bool power_off; | |
| u32 wakeup_pads; | |
| bool is_pad_wakeup; | |
| u32 pad_type[32]; | |
| const struct mxc_gpio_hwdata *hwdata; | |
| }; | |
| static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = { | |
| .dr_reg = 0x1c, | |
| .gdir_reg = 0x00, | |
| .psr_reg = 0x24, | |
| .icr1_reg = 0x28, | |
| .icr2_reg = 0x2c, | |
| .imr_reg = 0x30, | |
| .isr_reg = 0x34, | |
| .edge_sel_reg = -EINVAL, | |
| .low_level = 0x03, | |
| .high_level = 0x02, | |
| .rise_edge = 0x00, | |
| .fall_edge = 0x01, | |
| }; | |
| static struct mxc_gpio_hwdata imx31_gpio_hwdata = { | |
| .dr_reg = 0x00, | |
| .gdir_reg = 0x04, | |
| .psr_reg = 0x08, | |
| .icr1_reg = 0x0c, | |
| .icr2_reg = 0x10, | |
| .imr_reg = 0x14, | |
| .isr_reg = 0x18, | |
| .edge_sel_reg = -EINVAL, | |
| .low_level = 0x00, | |
| .high_level = 0x01, | |
| .rise_edge = 0x02, | |
| .fall_edge = 0x03, | |
| }; | |
| static struct mxc_gpio_hwdata imx35_gpio_hwdata = { | |
| .dr_reg = 0x00, | |
| .gdir_reg = 0x04, | |
| .psr_reg = 0x08, | |
| .icr1_reg = 0x0c, | |
| .icr2_reg = 0x10, | |
| .imr_reg = 0x14, | |
| .isr_reg = 0x18, | |
| .edge_sel_reg = 0x1c, | |
| .low_level = 0x00, | |
| .high_level = 0x01, | |
| .rise_edge = 0x02, | |
| .fall_edge = 0x03, | |
| }; | |
| #define GPIO_DR (port->hwdata->dr_reg) | |
| #define GPIO_GDIR (port->hwdata->gdir_reg) | |
| #define GPIO_PSR (port->hwdata->psr_reg) | |
| #define GPIO_ICR1 (port->hwdata->icr1_reg) | |
| #define GPIO_ICR2 (port->hwdata->icr2_reg) | |
| #define GPIO_IMR (port->hwdata->imr_reg) | |
| #define GPIO_ISR (port->hwdata->isr_reg) | |
| #define GPIO_EDGE_SEL (port->hwdata->edge_sel_reg) | |
| #define GPIO_INT_LOW_LEV (port->hwdata->low_level) | |
| #define GPIO_INT_HIGH_LEV (port->hwdata->high_level) | |
| #define GPIO_INT_RISE_EDGE (port->hwdata->rise_edge) | |
| #define GPIO_INT_FALL_EDGE (port->hwdata->fall_edge) | |
| #define GPIO_INT_BOTH_EDGES 0x4 | |
| static const struct of_device_id mxc_gpio_dt_ids[] = { | |
| { .compatible = "fsl,imx1-gpio", .data = &imx1_imx21_gpio_hwdata }, | |
| { .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata }, | |
| { .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata }, | |
| { .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata }, | |
| { .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata }, | |
| { .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata }, | |
| { .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata }, | |
| { .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids); | |
| /* | |
| * MX2 has one interrupt *for all* gpio ports. The list is used | |
| * to save the references to all ports, so that mx2_gpio_irq_handler | |
| * can walk through all interrupt status registers. | |
| */ | |
| static LIST_HEAD(mxc_gpio_ports); | |
| /* Note: This driver assumes 32 GPIOs are handled in one register */ | |
| static int gpio_set_irq_type(struct irq_data *d, u32 type) | |
| { | |
| struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); | |
| struct mxc_gpio_port *port = gc->private; | |
| u32 bit, val; | |
| u32 gpio_idx = d->hwirq; | |
| int edge; | |
| void __iomem *reg = port->base; | |
| port->both_edges &= ~(1 << gpio_idx); | |
| switch (type) { | |
| case IRQ_TYPE_EDGE_RISING: | |
| edge = GPIO_INT_RISE_EDGE; | |
| break; | |
| case IRQ_TYPE_EDGE_FALLING: | |
| edge = GPIO_INT_FALL_EDGE; | |
| break; | |
| case IRQ_TYPE_EDGE_BOTH: | |
| if (GPIO_EDGE_SEL >= 0) { | |
| edge = GPIO_INT_BOTH_EDGES; | |
| } else { | |
| val = port->gen_gc.gc.get(&port->gen_gc.gc, gpio_idx); | |
| if (val) { | |
| edge = GPIO_INT_LOW_LEV; | |
| pr_debug("mxc: set GPIO %d to low trigger\n", gpio_idx); | |
| } else { | |
| edge = GPIO_INT_HIGH_LEV; | |
| pr_debug("mxc: set GPIO %d to high trigger\n", gpio_idx); | |
| } | |
| port->both_edges |= 1 << gpio_idx; | |
| } | |
| break; | |
| case IRQ_TYPE_LEVEL_LOW: | |
| edge = GPIO_INT_LOW_LEV; | |
| break; | |
| case IRQ_TYPE_LEVEL_HIGH: | |
| edge = GPIO_INT_HIGH_LEV; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| scoped_guard(gpio_generic_lock_irqsave, &port->gen_gc) { | |
| if (GPIO_EDGE_SEL >= 0) { | |
| val = readl(port->base + GPIO_EDGE_SEL); | |
| if (edge == GPIO_INT_BOTH_EDGES) | |
| writel(val | (1 << gpio_idx), | |
| port->base + GPIO_EDGE_SEL); | |
| else | |
| writel(val & ~(1 << gpio_idx), | |
| port->base + GPIO_EDGE_SEL); | |
| } | |
| if (edge != GPIO_INT_BOTH_EDGES) { | |
| reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */ | |
| bit = gpio_idx & 0xf; | |
| val = readl(reg) & ~(0x3 << (bit << 1)); | |
| writel(val | (edge << (bit << 1)), reg); | |
| } | |
| writel(1 << gpio_idx, port->base + GPIO_ISR); | |
| port->pad_type[gpio_idx] = type; | |
| } | |
| return port->gen_gc.gc.direction_input(&port->gen_gc.gc, gpio_idx); | |
| } | |
| static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) | |
| { | |
| void __iomem *reg = port->base; | |
| u32 bit, val; | |
| int edge; | |
| guard(gpio_generic_lock_irqsave)(&port->gen_gc); | |
| reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ | |
| bit = gpio & 0xf; | |
| val = readl(reg); | |
| edge = (val >> (bit << 1)) & 3; | |
| val &= ~(0x3 << (bit << 1)); | |
| if (edge == GPIO_INT_HIGH_LEV) { | |
| edge = GPIO_INT_LOW_LEV; | |
| pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); | |
| } else if (edge == GPIO_INT_LOW_LEV) { | |
| edge = GPIO_INT_HIGH_LEV; | |
| pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); | |
| } else { | |
| pr_err("mxc: invalid configuration for GPIO %d: %x\n", | |
| gpio, edge); | |
| return; | |
| } | |
| writel(val | (edge << (bit << 1)), reg); | |
| } | |
| /* handle 32 interrupts in one status register */ | |
| static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) | |
| { | |
| while (irq_stat != 0) { | |
| int irqoffset = fls(irq_stat) - 1; | |
| if (port->both_edges & (1 << irqoffset)) | |
| mxc_flip_edge(port, irqoffset); | |
| generic_handle_domain_irq(port->domain, irqoffset); | |
| irq_stat &= ~(1 << irqoffset); | |
| } | |
| } | |
| /* MX1 and MX3 has one interrupt *per* gpio port */ | |
| static void mx3_gpio_irq_handler(struct irq_desc *desc) | |
| { | |
| u32 irq_stat; | |
| struct mxc_gpio_port *port = irq_desc_get_handler_data(desc); | |
| struct irq_chip *chip = irq_desc_get_chip(desc); | |
| if (port->is_pad_wakeup) | |
| return; | |
| chained_irq_enter(chip, desc); | |
| irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR); | |
| mxc_gpio_irq_handler(port, irq_stat); | |
| chained_irq_exit(chip, desc); | |
| } | |
| /* MX2 has one interrupt *for all* gpio ports */ | |
| static void mx2_gpio_irq_handler(struct irq_desc *desc) | |
| { | |
| u32 irq_msk, irq_stat; | |
| struct mxc_gpio_port *port; | |
| struct irq_chip *chip = irq_desc_get_chip(desc); | |
| chained_irq_enter(chip, desc); | |
| /* walk through all interrupt status registers */ | |
| list_for_each_entry(port, &mxc_gpio_ports, node) { | |
| irq_msk = readl(port->base + GPIO_IMR); | |
| if (!irq_msk) | |
| continue; | |
| irq_stat = readl(port->base + GPIO_ISR) & irq_msk; | |
| if (irq_stat) | |
| mxc_gpio_irq_handler(port, irq_stat); | |
| } | |
| chained_irq_exit(chip, desc); | |
| } | |
| /* | |
| * Set interrupt number "irq" in the GPIO as a wake-up source. | |
| * While system is running, all registered GPIO interrupts need to have | |
| * wake-up enabled. When system is suspended, only selected GPIO interrupts | |
| * need to have wake-up enabled. | |
| * @param irq interrupt source number | |
| * @param enable enable as wake-up if equal to non-zero | |
| * @return This function returns 0 on success. | |
| */ | |
| static int gpio_set_wake_irq(struct irq_data *d, u32 enable) | |
| { | |
| struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); | |
| struct mxc_gpio_port *port = gc->private; | |
| u32 gpio_idx = d->hwirq; | |
| int ret; | |
| if (enable) { | |
| if (port->irq_high && (gpio_idx >= 16)) | |
| ret = enable_irq_wake(port->irq_high); | |
| else | |
| ret = enable_irq_wake(port->irq); | |
| port->wakeup_pads |= BIT(gpio_idx); | |
| } else { | |
| if (port->irq_high && (gpio_idx >= 16)) | |
| ret = disable_irq_wake(port->irq_high); | |
| else | |
| ret = disable_irq_wake(port->irq); | |
| port->wakeup_pads &= ~BIT(gpio_idx); | |
| } | |
| return ret; | |
| } | |
| static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base) | |
| { | |
| struct irq_chip_generic *gc; | |
| struct irq_chip_type *ct; | |
| int rv; | |
| gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxc", 1, irq_base, | |
| port->base, handle_level_irq); | |
| if (!gc) | |
| return -ENOMEM; | |
| gc->private = port; | |
| ct = gc->chip_types; | |
| ct->chip.irq_ack = irq_gc_ack_set_bit; | |
| ct->chip.irq_mask = irq_gc_mask_clr_bit; | |
| ct->chip.irq_unmask = irq_gc_mask_set_bit; | |
| ct->chip.irq_set_type = gpio_set_irq_type; | |
| ct->chip.irq_set_wake = gpio_set_wake_irq; | |
| ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND; | |
| ct->regs.ack = GPIO_ISR; | |
| ct->regs.mask = GPIO_IMR; | |
| rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32), | |
| IRQ_GC_INIT_NESTED_LOCK, | |
| IRQ_NOREQUEST, 0); | |
| return rv; | |
| } | |
| static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset) | |
| { | |
| struct mxc_gpio_port *port = gpiochip_get_data(gc); | |
| return irq_find_mapping(port->domain, offset); | |
| } | |
| static int mxc_gpio_request(struct gpio_chip *chip, unsigned int offset) | |
| { | |
| int ret; | |
| ret = gpiochip_generic_request(chip, offset); | |
| if (ret) | |
| return ret; | |
| return pm_runtime_resume_and_get(chip->parent); | |
| } | |
| static void mxc_gpio_free(struct gpio_chip *chip, unsigned int offset) | |
| { | |
| gpiochip_generic_free(chip, offset); | |
| pm_runtime_put(chip->parent); | |
| } | |
| static void mxc_update_irq_chained_handler(struct mxc_gpio_port *port, bool enable) | |
| { | |
| if (enable) | |
| irq_set_chained_handler_and_data(port->irq, port->mx_irq_handler, port); | |
| else | |
| irq_set_chained_handler_and_data(port->irq, NULL, NULL); | |
| /* setup handler for GPIO 16 to 31 */ | |
| if (port->irq_high > 0) { | |
| if (enable) | |
| irq_set_chained_handler_and_data(port->irq_high, | |
| port->mx_irq_handler, | |
| port); | |
| else | |
| irq_set_chained_handler_and_data(port->irq_high, NULL, NULL); | |
| } | |
| } | |
| static int mxc_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct gpio_generic_chip_config config = { }; | |
| struct device_node *np = pdev->dev.of_node; | |
| struct mxc_gpio_port *port; | |
| int irq_count; | |
| int irq_base; | |
| int err; | |
| port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); | |
| if (!port) | |
| return -ENOMEM; | |
| port->dev = &pdev->dev; | |
| port->hwdata = device_get_match_data(&pdev->dev); | |
| port->base = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(port->base)) | |
| return PTR_ERR(port->base); | |
| irq_count = platform_irq_count(pdev); | |
| if (irq_count < 0) | |
| return irq_count; | |
| if (irq_count > 1) { | |
| port->irq_high = platform_get_irq(pdev, 1); | |
| if (port->irq_high < 0) | |
| port->irq_high = 0; | |
| } | |
| port->irq = platform_get_irq(pdev, 0); | |
| if (port->irq < 0) | |
| return port->irq; | |
| /* the controller clock is optional */ | |
| port->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL); | |
| if (IS_ERR(port->clk)) | |
| return PTR_ERR(port->clk); | |
| if (of_device_is_compatible(np, "fsl,imx7d-gpio")) | |
| port->power_off = true; | |
| pm_runtime_get_noresume(&pdev->dev); | |
| pm_runtime_set_active(&pdev->dev); | |
| pm_runtime_enable(&pdev->dev); | |
| /* disable the interrupt and clear the status */ | |
| writel(0, port->base + GPIO_IMR); | |
| writel(~0, port->base + GPIO_ISR); | |
| if (of_device_is_compatible(np, "fsl,imx21-gpio")) { | |
| /* | |
| * Setup one handler for all GPIO interrupts. Actually setting | |
| * the handler is needed only once, but doing it for every port | |
| * is more robust and easier. | |
| */ | |
| port->irq_high = 0; | |
| port->mx_irq_handler = mx2_gpio_irq_handler; | |
| } else | |
| port->mx_irq_handler = mx3_gpio_irq_handler; | |
| mxc_update_irq_chained_handler(port, true); | |
| config.dev = &pdev->dev; | |
| config.sz = 4; | |
| config.dat = port->base + GPIO_PSR; | |
| config.set = port->base + GPIO_DR; | |
| config.dirout = port->base + GPIO_GDIR; | |
| config.flags = GPIO_GENERIC_READ_OUTPUT_REG_SET; | |
| err = gpio_generic_chip_init(&port->gen_gc, &config); | |
| if (err) | |
| goto out_bgio; | |
| port->gen_gc.gc.request = mxc_gpio_request; | |
| port->gen_gc.gc.free = mxc_gpio_free; | |
| port->gen_gc.gc.to_irq = mxc_gpio_to_irq; | |
| /* | |
| * Driver is DT-only, so a fixed base needs only be maintained for legacy | |
| * userspace with sysfs interface. | |
| */ | |
| if (IS_ENABLED(CONFIG_GPIO_SYSFS)) | |
| port->gen_gc.gc.base = of_alias_get_id(np, "gpio") * 32; | |
| else /* silence boot time warning */ | |
| port->gen_gc.gc.base = -1; | |
| err = devm_gpiochip_add_data(&pdev->dev, &port->gen_gc.gc, port); | |
| if (err) | |
| goto out_bgio; | |
| irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id()); | |
| if (irq_base < 0) { | |
| err = irq_base; | |
| goto out_bgio; | |
| } | |
| port->domain = irq_domain_create_legacy(dev_fwnode(&pdev->dev), 32, irq_base, 0, | |
| &irq_domain_simple_ops, NULL); | |
| if (!port->domain) { | |
| err = -ENODEV; | |
| goto out_bgio; | |
| } | |
| irq_domain_set_pm_device(port->domain, &pdev->dev); | |
| /* gpio-mxc can be a generic irq chip */ | |
| err = mxc_gpio_init_gc(port, irq_base); | |
| if (err < 0) | |
| goto out_irqdomain_remove; | |
| list_add_tail(&port->node, &mxc_gpio_ports); | |
| platform_set_drvdata(pdev, port); | |
| pm_runtime_put_autosuspend(&pdev->dev); | |
| return 0; | |
| out_irqdomain_remove: | |
| irq_domain_remove(port->domain); | |
| out_bgio: | |
| pm_runtime_disable(&pdev->dev); | |
| pm_runtime_put_noidle(&pdev->dev); | |
| dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err); | |
| return err; | |
| } | |
| static void mxc_gpio_save_regs(struct mxc_gpio_port *port) | |
| { | |
| if (!port->power_off) | |
| return; | |
| port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1); | |
| port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2); | |
| port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR); | |
| port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR); | |
| port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL); | |
| port->gpio_saved_reg.dr = readl(port->base + GPIO_DR); | |
| } | |
| static void mxc_gpio_restore_regs(struct mxc_gpio_port *port) | |
| { | |
| if (!port->power_off) | |
| return; | |
| writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1); | |
| writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2); | |
| writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR); | |
| writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR); | |
| writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL); | |
| writel(port->gpio_saved_reg.dr, port->base + GPIO_DR); | |
| } | |
| static bool mxc_gpio_generic_config(struct mxc_gpio_port *port, | |
| unsigned int offset, unsigned long conf) | |
| { | |
| struct device_node *np = port->dev->of_node; | |
| if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") || | |
| of_device_is_compatible(np, "fsl,imx8qxp-gpio") || | |
| of_device_is_compatible(np, "fsl,imx8qm-gpio")) | |
| return (gpiochip_generic_config(&port->gen_gc.gc, | |
| offset, conf) == 0); | |
| return false; | |
| } | |
| static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable) | |
| { | |
| unsigned long config; | |
| bool ret = false; | |
| int i, type; | |
| bool is_imx8qm = of_device_is_compatible(port->dev->of_node, "fsl,imx8qm-gpio"); | |
| static const u32 pad_type_map[] = { | |
| IMX_SCU_WAKEUP_OFF, /* 0 */ | |
| IMX_SCU_WAKEUP_RISE_EDGE, /* IRQ_TYPE_EDGE_RISING */ | |
| IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_FALLING */ | |
| IMX_SCU_WAKEUP_RISE_EDGE, /* IRQ_TYPE_EDGE_BOTH */ | |
| IMX_SCU_WAKEUP_HIGH_LVL, /* IRQ_TYPE_LEVEL_HIGH */ | |
| IMX_SCU_WAKEUP_OFF, /* 5 */ | |
| IMX_SCU_WAKEUP_OFF, /* 6 */ | |
| IMX_SCU_WAKEUP_OFF, /* 7 */ | |
| IMX_SCU_WAKEUP_LOW_LVL, /* IRQ_TYPE_LEVEL_LOW */ | |
| }; | |
| for (i = 0; i < 32; i++) { | |
| if ((port->wakeup_pads & (1 << i))) { | |
| type = port->pad_type[i]; | |
| if (enable) | |
| config = pad_type_map[type]; | |
| else | |
| config = IMX_SCU_WAKEUP_OFF; | |
| if (is_imx8qm && config == IMX_SCU_WAKEUP_FALL_EDGE) { | |
| dev_warn_once(port->dev, | |
| "No falling-edge support for wakeup on i.MX8QM\n"); | |
| config = IMX_SCU_WAKEUP_OFF; | |
| } | |
| ret |= mxc_gpio_generic_config(port, i, config); | |
| } | |
| } | |
| return ret; | |
| } | |
| static int mxc_gpio_runtime_suspend(struct device *dev) | |
| { | |
| struct mxc_gpio_port *port = dev_get_drvdata(dev); | |
| mxc_gpio_save_regs(port); | |
| clk_disable_unprepare(port->clk); | |
| mxc_update_irq_chained_handler(port, false); | |
| return 0; | |
| } | |
| static int mxc_gpio_runtime_resume(struct device *dev) | |
| { | |
| struct mxc_gpio_port *port = dev_get_drvdata(dev); | |
| int ret; | |
| mxc_update_irq_chained_handler(port, true); | |
| ret = clk_prepare_enable(port->clk); | |
| if (ret) { | |
| mxc_update_irq_chained_handler(port, false); | |
| return ret; | |
| } | |
| mxc_gpio_restore_regs(port); | |
| return 0; | |
| } | |
| static int mxc_gpio_noirq_suspend(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct mxc_gpio_port *port = platform_get_drvdata(pdev); | |
| if (port->wakeup_pads > 0) | |
| port->is_pad_wakeup = mxc_gpio_set_pad_wakeup(port, true); | |
| return 0; | |
| } | |
| static int mxc_gpio_noirq_resume(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct mxc_gpio_port *port = platform_get_drvdata(pdev); | |
| if (port->wakeup_pads > 0) | |
| mxc_gpio_set_pad_wakeup(port, false); | |
| port->is_pad_wakeup = false; | |
| return 0; | |
| } | |
| static const struct dev_pm_ops mxc_gpio_dev_pm_ops = { | |
| NOIRQ_SYSTEM_SLEEP_PM_OPS(mxc_gpio_noirq_suspend, mxc_gpio_noirq_resume) | |
| RUNTIME_PM_OPS(mxc_gpio_runtime_suspend, mxc_gpio_runtime_resume, NULL) | |
| }; | |
| static int mxc_gpio_syscore_suspend(void *data) | |
| { | |
| struct mxc_gpio_port *port; | |
| int ret; | |
| /* walk through all ports */ | |
| list_for_each_entry(port, &mxc_gpio_ports, node) { | |
| ret = clk_prepare_enable(port->clk); | |
| if (ret) | |
| return ret; | |
| mxc_gpio_save_regs(port); | |
| clk_disable_unprepare(port->clk); | |
| } | |
| return 0; | |
| } | |
| static void mxc_gpio_syscore_resume(void *data) | |
| { | |
| struct mxc_gpio_port *port; | |
| int ret; | |
| /* walk through all ports */ | |
| list_for_each_entry(port, &mxc_gpio_ports, node) { | |
| ret = clk_prepare_enable(port->clk); | |
| if (ret) { | |
| pr_err("mxc: failed to enable gpio clock %d\n", ret); | |
| return; | |
| } | |
| mxc_gpio_restore_regs(port); | |
| clk_disable_unprepare(port->clk); | |
| } | |
| } | |
| static const struct syscore_ops mxc_gpio_syscore_ops = { | |
| .suspend = mxc_gpio_syscore_suspend, | |
| .resume = mxc_gpio_syscore_resume, | |
| }; | |
| static struct syscore mxc_gpio_syscore = { | |
| .ops = &mxc_gpio_syscore_ops, | |
| }; | |
| static struct platform_driver mxc_gpio_driver = { | |
| .driver = { | |
| .name = "gpio-mxc", | |
| .of_match_table = mxc_gpio_dt_ids, | |
| .suppress_bind_attrs = true, | |
| .pm = pm_ptr(&mxc_gpio_dev_pm_ops), | |
| }, | |
| .probe = mxc_gpio_probe, | |
| }; | |
| static int __init gpio_mxc_init(void) | |
| { | |
| register_syscore(&mxc_gpio_syscore); | |
| return platform_driver_register(&mxc_gpio_driver); | |
| } | |
| subsys_initcall(gpio_mxc_init); | |
| MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); | |
| MODULE_DESCRIPTION("i.MX GPIO Driver"); | |
| MODULE_LICENSE("GPL"); |