| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * HID driver for Sony DualSense(TM) controller. | |
| * | |
| * Copyright (c) 2020-2022 Sony Interactive Entertainment | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/bits.h> | |
| #include <linux/cleanup.h> | |
| #include <linux/crc32.h> | |
| #include <linux/device.h> | |
| #include <linux/hid.h> | |
| #include <linux/idr.h> | |
| #include <linux/input/mt.h> | |
| #include <linux/leds.h> | |
| #include <linux/led-class-multicolor.h> | |
| #include <linux/module.h> | |
| #include <linux/unaligned.h> | |
| #include "hid-ids.h" | |
| /* List of connected playstation devices. */ | |
| static DEFINE_MUTEX(ps_devices_lock); | |
| static LIST_HEAD(ps_devices_list); | |
| static DEFINE_IDA(ps_player_id_allocator); | |
| #define HID_PLAYSTATION_VERSION_PATCH 0x8000 | |
| enum PS_TYPE { | |
| PS_TYPE_PS4_DUALSHOCK4, | |
| PS_TYPE_PS5_DUALSENSE, | |
| }; | |
| /* Base class for playstation devices. */ | |
| struct ps_device { | |
| struct list_head list; | |
| struct hid_device *hdev; | |
| spinlock_t lock; /* Sync between event handler and workqueue */ | |
| u32 player_id; | |
| struct power_supply_desc battery_desc; | |
| struct power_supply *battery; | |
| u8 battery_capacity; | |
| int battery_status; | |
| const char *input_dev_name; /* Name of primary input device. */ | |
| u8 mac_address[6]; /* Note: stored in little endian order. */ | |
| u32 hw_version; | |
| u32 fw_version; | |
| int (*parse_report)(struct ps_device *dev, struct hid_report *report, u8 *data, int size); | |
| void (*remove)(struct ps_device *dev); | |
| }; | |
| /* Calibration data for playstation motion sensors. */ | |
| struct ps_calibration_data { | |
| int abs_code; | |
| short bias; | |
| int sens_numer; | |
| int sens_denom; | |
| }; | |
| struct ps_led_info { | |
| const char *name; | |
| const char *color; | |
| int max_brightness; | |
| enum led_brightness (*brightness_get)(struct led_classdev *cdev); | |
| int (*brightness_set)(struct led_classdev *cdev, enum led_brightness); | |
| int (*blink_set)(struct led_classdev *led, unsigned long *on, unsigned long *off); | |
| }; | |
| /* Seed values for DualShock4 / DualSense CRC32 for different report types. */ | |
| #define PS_INPUT_CRC32_SEED 0xA1 | |
| #define PS_OUTPUT_CRC32_SEED 0xA2 | |
| #define PS_FEATURE_CRC32_SEED 0xA3 | |
| #define DS_INPUT_REPORT_USB 0x01 | |
| #define DS_INPUT_REPORT_USB_SIZE 64 | |
| #define DS_INPUT_REPORT_BT 0x31 | |
| #define DS_INPUT_REPORT_BT_SIZE 78 | |
| #define DS_OUTPUT_REPORT_USB 0x02 | |
| #define DS_OUTPUT_REPORT_USB_SIZE 63 | |
| #define DS_OUTPUT_REPORT_BT 0x31 | |
| #define DS_OUTPUT_REPORT_BT_SIZE 78 | |
| #define DS_FEATURE_REPORT_CALIBRATION 0x05 | |
| #define DS_FEATURE_REPORT_CALIBRATION_SIZE 41 | |
| #define DS_FEATURE_REPORT_PAIRING_INFO 0x09 | |
| #define DS_FEATURE_REPORT_PAIRING_INFO_SIZE 20 | |
| #define DS_FEATURE_REPORT_FIRMWARE_INFO 0x20 | |
| #define DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE 64 | |
| /* Button masks for DualSense input report. */ | |
| #define DS_BUTTONS0_HAT_SWITCH GENMASK(3, 0) | |
| #define DS_BUTTONS0_SQUARE BIT(4) | |
| #define DS_BUTTONS0_CROSS BIT(5) | |
| #define DS_BUTTONS0_CIRCLE BIT(6) | |
| #define DS_BUTTONS0_TRIANGLE BIT(7) | |
| #define DS_BUTTONS1_L1 BIT(0) | |
| #define DS_BUTTONS1_R1 BIT(1) | |
| #define DS_BUTTONS1_L2 BIT(2) | |
| #define DS_BUTTONS1_R2 BIT(3) | |
| #define DS_BUTTONS1_CREATE BIT(4) | |
| #define DS_BUTTONS1_OPTIONS BIT(5) | |
| #define DS_BUTTONS1_L3 BIT(6) | |
| #define DS_BUTTONS1_R3 BIT(7) | |
| #define DS_BUTTONS2_PS_HOME BIT(0) | |
| #define DS_BUTTONS2_TOUCHPAD BIT(1) | |
| #define DS_BUTTONS2_MIC_MUTE BIT(2) | |
| /* DualSense Edge extra buttons in buttons[2], bits 4-7. */ | |
| #define DS_EDGE_BUTTONS_FN1 BIT(4) | |
| #define DS_EDGE_BUTTONS_FN2 BIT(5) | |
| #define DS_EDGE_BUTTONS_LEFT_PADDLE BIT(6) | |
| #define DS_EDGE_BUTTONS_RIGHT_PADDLE BIT(7) | |
| /* Status fields of DualSense input report. */ | |
| #define DS_STATUS0_BATTERY_CAPACITY GENMASK(3, 0) | |
| #define DS_STATUS0_CHARGING GENMASK(7, 4) | |
| #define DS_STATUS1_HP_DETECT BIT(0) | |
| #define DS_STATUS1_MIC_DETECT BIT(1) | |
| #define DS_STATUS1_JACK_DETECT (DS_STATUS1_HP_DETECT | DS_STATUS1_MIC_DETECT) | |
| #define DS_STATUS1_MIC_MUTE BIT(2) | |
| /* Feature version from DualSense Firmware Info report. */ | |
| #define DS_FEATURE_VERSION_MINOR GENMASK(7, 0) | |
| #define DS_FEATURE_VERSION_MAJOR GENMASK(15, 8) | |
| #define DS_FEATURE_VERSION(major, minor) (FIELD_PREP(DS_FEATURE_VERSION_MAJOR, major) | \ | |
| FIELD_PREP(DS_FEATURE_VERSION_MINOR, minor)) | |
| /* | |
| * Status of a DualSense touch point contact. | |
| * Contact IDs, with highest bit set are 'inactive' | |
| * and any associated data is then invalid. | |
| */ | |
| #define DS_TOUCH_POINT_INACTIVE BIT(7) | |
| #define DS_TOUCH_POINT_X_LO GENMASK(7, 0) | |
| #define DS_TOUCH_POINT_X_HI GENMASK(11, 8) | |
| #define DS_TOUCH_POINT_X(hi, lo) (FIELD_PREP(DS_TOUCH_POINT_X_HI, hi) | \ | |
| FIELD_PREP(DS_TOUCH_POINT_X_LO, lo)) | |
| #define DS_TOUCH_POINT_Y_LO GENMASK(3, 0) | |
| #define DS_TOUCH_POINT_Y_HI GENMASK(11, 4) | |
| #define DS_TOUCH_POINT_Y(hi, lo) (FIELD_PREP(DS_TOUCH_POINT_Y_HI, hi) | \ | |
| FIELD_PREP(DS_TOUCH_POINT_Y_LO, lo)) | |
| /* Magic value required in tag field of Bluetooth output report. */ | |
| #define DS_OUTPUT_TAG 0x10 | |
| #define DS_OUTPUT_SEQ_TAG GENMASK(3, 0) | |
| #define DS_OUTPUT_SEQ_NO GENMASK(7, 4) | |
| /* Flags for DualSense output report. */ | |
| #define DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION BIT(0) | |
| #define DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT BIT(1) | |
| #define DS_OUTPUT_VALID_FLAG0_SPEAKER_VOLUME_ENABLE BIT(5) | |
| #define DS_OUTPUT_VALID_FLAG0_MIC_VOLUME_ENABLE BIT(6) | |
| #define DS_OUTPUT_VALID_FLAG0_AUDIO_CONTROL_ENABLE BIT(7) | |
| #define DS_OUTPUT_VALID_FLAG1_MIC_MUTE_LED_CONTROL_ENABLE BIT(0) | |
| #define DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE BIT(1) | |
| #define DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE BIT(2) | |
| #define DS_OUTPUT_VALID_FLAG1_RELEASE_LEDS BIT(3) | |
| #define DS_OUTPUT_VALID_FLAG1_PLAYER_INDICATOR_CONTROL_ENABLE BIT(4) | |
| #define DS_OUTPUT_VALID_FLAG1_AUDIO_CONTROL2_ENABLE BIT(7) | |
| #define DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE BIT(1) | |
| #define DS_OUTPUT_VALID_FLAG2_COMPATIBLE_VIBRATION2 BIT(2) | |
| #define DS_OUTPUT_AUDIO_FLAGS_OUTPUT_PATH_SEL GENMASK(5, 4) | |
| #define DS_OUTPUT_AUDIO_FLAGS2_SP_PREAMP_GAIN GENMASK(2, 0) | |
| #define DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE BIT(4) | |
| #define DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT BIT(1) | |
| /* DualSense hardware limits */ | |
| #define DS_ACC_RES_PER_G 8192 | |
| #define DS_ACC_RANGE (4 * DS_ACC_RES_PER_G) | |
| #define DS_GYRO_RES_PER_DEG_S 1024 | |
| #define DS_GYRO_RANGE (2048 * DS_GYRO_RES_PER_DEG_S) | |
| #define DS_TOUCHPAD_WIDTH 1920 | |
| #define DS_TOUCHPAD_HEIGHT 1080 | |
| struct dualsense { | |
| struct ps_device base; | |
| struct input_dev *gamepad; | |
| struct input_dev *sensors; | |
| struct input_dev *touchpad; | |
| struct input_dev *jack; | |
| /* True if this is a DualSense Edge (product 0x0df2). */ | |
| bool is_edge; | |
| /* Update version is used as a feature/capability version. */ | |
| u16 update_version; | |
| /* Calibration data for accelerometer and gyroscope. */ | |
| struct ps_calibration_data accel_calib_data[3]; | |
| struct ps_calibration_data gyro_calib_data[3]; | |
| /* Timestamp for sensor data */ | |
| bool sensor_timestamp_initialized; | |
| u32 prev_sensor_timestamp; | |
| u32 sensor_timestamp_us; | |
| /* Compatible rumble state */ | |
| bool use_vibration_v2; | |
| bool update_rumble; | |
| u8 motor_left; | |
| u8 motor_right; | |
| /* RGB lightbar */ | |
| struct led_classdev_mc lightbar; | |
| bool update_lightbar; | |
| u8 lightbar_red; | |
| u8 lightbar_green; | |
| u8 lightbar_blue; | |
| /* Audio Jack plugged state */ | |
| u8 plugged_state; | |
| u8 prev_plugged_state; | |
| bool prev_plugged_state_valid; | |
| /* Microphone */ | |
| bool update_mic_mute; | |
| bool mic_muted; | |
| bool last_btn_mic_state; | |
| /* Player leds */ | |
| bool update_player_leds; | |
| u8 player_leds_state; | |
| struct led_classdev player_leds[5]; | |
| struct work_struct output_worker; | |
| bool output_worker_initialized; | |
| void *output_report_dmabuf; | |
| u8 output_seq; /* Sequence number for output report. */ | |
| }; | |
| struct dualsense_touch_point { | |
| u8 contact; | |
| u8 x_lo; | |
| u8 x_hi:4, y_lo:4; | |
| u8 y_hi; | |
| } __packed; | |
| static_assert(sizeof(struct dualsense_touch_point) == 4); | |
| /* Main DualSense input report excluding any BT/USB specific headers. */ | |
| struct dualsense_input_report { | |
| u8 x, y; | |
| u8 rx, ry; | |
| u8 z, rz; | |
| u8 seq_number; | |
| u8 buttons[4]; | |
| u8 reserved[4]; | |
| /* Motion sensors */ | |
| __le16 gyro[3]; /* x, y, z */ | |
| __le16 accel[3]; /* x, y, z */ | |
| __le32 sensor_timestamp; | |
| u8 reserved2; | |
| /* Touchpad */ | |
| struct dualsense_touch_point points[2]; | |
| u8 reserved3[12]; | |
| u8 status[3]; | |
| u8 reserved4[8]; | |
| } __packed; | |
| /* Common input report size shared equals the size of the USB report minus 1 byte for ReportID. */ | |
| static_assert(sizeof(struct dualsense_input_report) == DS_INPUT_REPORT_USB_SIZE - 1); | |
| /* Common data between DualSense BT/USB main output report. */ | |
| struct dualsense_output_report_common { | |
| u8 valid_flag0; | |
| u8 valid_flag1; | |
| /* For DualShock 4 compatibility mode. */ | |
| u8 motor_right; | |
| u8 motor_left; | |
| /* Audio controls */ | |
| u8 headphone_volume; /* 0x0 - 0x7f */ | |
| u8 speaker_volume; /* 0x0 - 0xff */ | |
| u8 mic_volume; /* 0x0 - 0x40 */ | |
| u8 audio_control; | |
| u8 mute_button_led; | |
| u8 power_save_control; | |
| u8 reserved2[27]; | |
| u8 audio_control2; | |
| /* LEDs and lightbar */ | |
| u8 valid_flag2; | |
| u8 reserved3[2]; | |
| u8 lightbar_setup; | |
| u8 led_brightness; | |
| u8 player_leds; | |
| u8 lightbar_red; | |
| u8 lightbar_green; | |
| u8 lightbar_blue; | |
| } __packed; | |
| static_assert(sizeof(struct dualsense_output_report_common) == 47); | |
| struct dualsense_output_report_bt { | |
| u8 report_id; /* 0x31 */ | |
| u8 seq_tag; | |
| u8 tag; | |
| struct dualsense_output_report_common common; | |
| u8 reserved[24]; | |
| __le32 crc32; | |
| } __packed; | |
| static_assert(sizeof(struct dualsense_output_report_bt) == DS_OUTPUT_REPORT_BT_SIZE); | |
| struct dualsense_output_report_usb { | |
| u8 report_id; /* 0x02 */ | |
| struct dualsense_output_report_common common; | |
| u8 reserved[15]; | |
| } __packed; | |
| static_assert(sizeof(struct dualsense_output_report_usb) == DS_OUTPUT_REPORT_USB_SIZE); | |
| /* | |
| * The DualSense has a main output report used to control most features. It is | |
| * largely the same between Bluetooth and USB except for different headers and CRC. | |
| * This structure hide the differences between the two to simplify sending output reports. | |
| */ | |
| struct dualsense_output_report { | |
| u8 *data; /* Start of data */ | |
| u8 len; /* Size of output report */ | |
| /* Points to Bluetooth data payload in case for a Bluetooth report else NULL. */ | |
| struct dualsense_output_report_bt *bt; | |
| /* Points to USB data payload in case for a USB report else NULL. */ | |
| struct dualsense_output_report_usb *usb; | |
| /* Points to common section of report, so past any headers. */ | |
| struct dualsense_output_report_common *common; | |
| }; | |
| #define DS4_INPUT_REPORT_USB 0x01 | |
| #define DS4_INPUT_REPORT_USB_SIZE 64 | |
| #define DS4_INPUT_REPORT_BT_MINIMAL 0x01 | |
| #define DS4_INPUT_REPORT_BT_MINIMAL_SIZE 10 | |
| #define DS4_INPUT_REPORT_BT 0x11 | |
| #define DS4_INPUT_REPORT_BT_SIZE 78 | |
| #define DS4_OUTPUT_REPORT_USB 0x05 | |
| #define DS4_OUTPUT_REPORT_USB_SIZE 32 | |
| #define DS4_OUTPUT_REPORT_BT 0x11 | |
| #define DS4_OUTPUT_REPORT_BT_SIZE 78 | |
| #define DS4_FEATURE_REPORT_CALIBRATION 0x02 | |
| #define DS4_FEATURE_REPORT_CALIBRATION_SIZE 37 | |
| #define DS4_FEATURE_REPORT_CALIBRATION_BT 0x05 | |
| #define DS4_FEATURE_REPORT_CALIBRATION_BT_SIZE 41 | |
| #define DS4_FEATURE_REPORT_FIRMWARE_INFO 0xa3 | |
| #define DS4_FEATURE_REPORT_FIRMWARE_INFO_SIZE 49 | |
| #define DS4_FEATURE_REPORT_PAIRING_INFO 0x12 | |
| #define DS4_FEATURE_REPORT_PAIRING_INFO_SIZE 16 | |
| /* | |
| * Status of a DualShock4 touch point contact. | |
| * Contact IDs, with highest bit set are 'inactive' | |
| * and any associated data is then invalid. | |
| */ | |
| #define DS4_TOUCH_POINT_INACTIVE BIT(7) | |
| #define DS4_TOUCH_POINT_X(hi, lo) DS_TOUCH_POINT_X(hi, lo) | |
| #define DS4_TOUCH_POINT_Y(hi, lo) DS_TOUCH_POINT_Y(hi, lo) | |
| /* Status field of DualShock4 input report. */ | |
| #define DS4_STATUS0_BATTERY_CAPACITY GENMASK(3, 0) | |
| #define DS4_STATUS0_CABLE_STATE BIT(4) | |
| /* Battery status within batery_status field. */ | |
| #define DS4_BATTERY_STATUS_FULL 11 | |
| /* Status1 bit2 contains dongle connection state: | |
| * 0 = connected | |
| * 1 = disconnected | |
| */ | |
| #define DS4_STATUS1_DONGLE_STATE BIT(2) | |
| /* The lower 6 bits of hw_control of the Bluetooth main output report | |
| * control the interval at which Dualshock 4 reports data: | |
| * 0x00 - 1ms | |
| * 0x01 - 1ms | |
| * 0x02 - 2ms | |
| * 0x3E - 62ms | |
| * 0x3F - disabled | |
| */ | |
| #define DS4_OUTPUT_HWCTL_BT_POLL_MASK 0x3F | |
| /* Default to 4ms poll interval, which is same as USB (not adjustable). */ | |
| #define DS4_BT_DEFAULT_POLL_INTERVAL_MS 4 | |
| #define DS4_OUTPUT_HWCTL_CRC32 0x40 | |
| #define DS4_OUTPUT_HWCTL_HID 0x80 | |
| /* Flags for DualShock4 output report. */ | |
| #define DS4_OUTPUT_VALID_FLAG0_MOTOR 0x01 | |
| #define DS4_OUTPUT_VALID_FLAG0_LED 0x02 | |
| #define DS4_OUTPUT_VALID_FLAG0_LED_BLINK 0x04 | |
| /* DualShock4 hardware limits */ | |
| #define DS4_ACC_RES_PER_G 8192 | |
| #define DS4_ACC_RANGE (4 * DS_ACC_RES_PER_G) | |
| #define DS4_GYRO_RES_PER_DEG_S 1024 | |
| #define DS4_GYRO_RANGE (2048 * DS_GYRO_RES_PER_DEG_S) | |
| #define DS4_LIGHTBAR_MAX_BLINK 255 /* 255 centiseconds */ | |
| #define DS4_TOUCHPAD_WIDTH 1920 | |
| #define DS4_TOUCHPAD_HEIGHT 942 | |
| enum dualshock4_dongle_state { | |
| DONGLE_DISCONNECTED, | |
| DONGLE_CALIBRATING, | |
| DONGLE_CONNECTED, | |
| DONGLE_DISABLED | |
| }; | |
| struct dualshock4 { | |
| struct ps_device base; | |
| struct input_dev *gamepad; | |
| struct input_dev *sensors; | |
| struct input_dev *touchpad; | |
| /* Calibration data for accelerometer and gyroscope. */ | |
| struct ps_calibration_data accel_calib_data[3]; | |
| struct ps_calibration_data gyro_calib_data[3]; | |
| /* Only used on dongle to track state transitions. */ | |
| enum dualshock4_dongle_state dongle_state; | |
| /* Used during calibration. */ | |
| struct work_struct dongle_hotplug_worker; | |
| /* Timestamp for sensor data */ | |
| bool sensor_timestamp_initialized; | |
| u32 prev_sensor_timestamp; | |
| u32 sensor_timestamp_us; | |
| /* Bluetooth poll interval */ | |
| bool update_bt_poll_interval; | |
| u8 bt_poll_interval; | |
| bool update_rumble; | |
| u8 motor_left; | |
| u8 motor_right; | |
| /* Lightbar leds */ | |
| bool update_lightbar; | |
| bool update_lightbar_blink; | |
| bool lightbar_enabled; /* For use by global LED control. */ | |
| u8 lightbar_red; | |
| u8 lightbar_green; | |
| u8 lightbar_blue; | |
| u8 lightbar_blink_on; /* In increments of 10ms. */ | |
| u8 lightbar_blink_off; /* In increments of 10ms. */ | |
| struct led_classdev lightbar_leds[4]; | |
| struct work_struct output_worker; | |
| bool output_worker_initialized; | |
| void *output_report_dmabuf; | |
| }; | |
| struct dualshock4_touch_point { | |
| u8 contact; | |
| u8 x_lo; | |
| u8 x_hi:4, y_lo:4; | |
| u8 y_hi; | |
| } __packed; | |
| static_assert(sizeof(struct dualshock4_touch_point) == 4); | |
| struct dualshock4_touch_report { | |
| u8 timestamp; | |
| struct dualshock4_touch_point points[2]; | |
| } __packed; | |
| static_assert(sizeof(struct dualshock4_touch_report) == 9); | |
| /* Main DualShock4 input report excluding any BT/USB specific headers. */ | |
| struct dualshock4_input_report_common { | |
| u8 x, y; | |
| u8 rx, ry; | |
| u8 buttons[3]; | |
| u8 z, rz; | |
| /* Motion sensors */ | |
| __le16 sensor_timestamp; | |
| u8 sensor_temperature; | |
| __le16 gyro[3]; /* x, y, z */ | |
| __le16 accel[3]; /* x, y, z */ | |
| u8 reserved2[5]; | |
| u8 status[2]; | |
| u8 reserved3; | |
| } __packed; | |
| static_assert(sizeof(struct dualshock4_input_report_common) == 32); | |
| struct dualshock4_input_report_usb { | |
| u8 report_id; /* 0x01 */ | |
| struct dualshock4_input_report_common common; | |
| u8 num_touch_reports; | |
| struct dualshock4_touch_report touch_reports[3]; | |
| u8 reserved[3]; | |
| } __packed; | |
| static_assert(sizeof(struct dualshock4_input_report_usb) == DS4_INPUT_REPORT_USB_SIZE); | |
| struct dualshock4_input_report_bt { | |
| u8 report_id; /* 0x11 */ | |
| u8 reserved[2]; | |
| struct dualshock4_input_report_common common; | |
| u8 num_touch_reports; | |
| struct dualshock4_touch_report touch_reports[4]; /* BT has 4 compared to 3 for USB */ | |
| u8 reserved2[2]; | |
| __le32 crc32; | |
| } __packed; | |
| static_assert(sizeof(struct dualshock4_input_report_bt) == DS4_INPUT_REPORT_BT_SIZE); | |
| /* Common data between Bluetooth and USB DualShock4 output reports. */ | |
| struct dualshock4_output_report_common { | |
| u8 valid_flag0; | |
| u8 valid_flag1; | |
| u8 reserved; | |
| u8 motor_right; | |
| u8 motor_left; | |
| u8 lightbar_red; | |
| u8 lightbar_green; | |
| u8 lightbar_blue; | |
| u8 lightbar_blink_on; | |
| u8 lightbar_blink_off; | |
| } __packed; | |
| struct dualshock4_output_report_usb { | |
| u8 report_id; /* 0x5 */ | |
| struct dualshock4_output_report_common common; | |
| u8 reserved[21]; | |
| } __packed; | |
| static_assert(sizeof(struct dualshock4_output_report_usb) == DS4_OUTPUT_REPORT_USB_SIZE); | |
| struct dualshock4_output_report_bt { | |
| u8 report_id; /* 0x11 */ | |
| u8 hw_control; | |
| u8 audio_control; | |
| struct dualshock4_output_report_common common; | |
| u8 reserved[61]; | |
| __le32 crc32; | |
| } __packed; | |
| static_assert(sizeof(struct dualshock4_output_report_bt) == DS4_OUTPUT_REPORT_BT_SIZE); | |
| /* | |
| * The DualShock4 has a main output report used to control most features. It is | |
| * largely the same between Bluetooth and USB except for different headers and CRC. | |
| * This structure hide the differences between the two to simplify sending output reports. | |
| */ | |
| struct dualshock4_output_report { | |
| u8 *data; /* Start of data */ | |
| u8 len; /* Size of output report */ | |
| /* Points to Bluetooth data payload in case for a Bluetooth report else NULL. */ | |
| struct dualshock4_output_report_bt *bt; | |
| /* Points to USB data payload in case for a USB report else NULL. */ | |
| struct dualshock4_output_report_usb *usb; | |
| /* Points to common section of report, so past any headers. */ | |
| struct dualshock4_output_report_common *common; | |
| }; | |
| /* | |
| * Common gamepad buttons across DualShock 3 / 4 and DualSense. | |
| * Note: for device with a touchpad, touchpad button is not included | |
| * as it will be part of the touchpad device. | |
| */ | |
| static const int ps_gamepad_buttons[] = { | |
| BTN_WEST, /* Square */ | |
| BTN_NORTH, /* Triangle */ | |
| BTN_EAST, /* Circle */ | |
| BTN_SOUTH, /* Cross */ | |
| BTN_TL, /* L1 */ | |
| BTN_TR, /* R1 */ | |
| BTN_TL2, /* L2 */ | |
| BTN_TR2, /* R2 */ | |
| BTN_SELECT, /* Create (PS5) / Share (PS4) */ | |
| BTN_START, /* Option */ | |
| BTN_THUMBL, /* L3 */ | |
| BTN_THUMBR, /* R3 */ | |
| BTN_MODE, /* PS Home */ | |
| }; | |
| static const struct {int x; int y; } ps_gamepad_hat_mapping[] = { | |
| {0, -1}, {1, -1}, {1, 0}, {1, 1}, {0, 1}, {-1, 1}, {-1, 0}, {-1, -1}, | |
| {0, 0}, | |
| }; | |
| static int dualshock4_get_calibration_data(struct dualshock4 *ds4); | |
| static inline void dualsense_schedule_work(struct dualsense *ds); | |
| static inline void dualshock4_schedule_work(struct dualshock4 *ds4); | |
| static void dualsense_set_lightbar(struct dualsense *ds, u8 red, u8 green, u8 blue); | |
| static void dualshock4_set_default_lightbar_colors(struct dualshock4 *ds4); | |
| /* | |
| * Add a new ps_device to ps_devices if it doesn't exist. | |
| * Return error on duplicate device, which can happen if the same | |
| * device is connected using both Bluetooth and USB. | |
| */ | |
| static int ps_devices_list_add(struct ps_device *dev) | |
| { | |
| struct ps_device *entry; | |
| guard(mutex)(&ps_devices_lock); | |
| list_for_each_entry(entry, &ps_devices_list, list) { | |
| if (!memcmp(entry->mac_address, dev->mac_address, sizeof(dev->mac_address))) { | |
| hid_err(dev->hdev, "Duplicate device found for MAC address %pMR.\n", | |
| dev->mac_address); | |
| return -EEXIST; | |
| } | |
| } | |
| list_add_tail(&dev->list, &ps_devices_list); | |
| return 0; | |
| } | |
| static int ps_devices_list_remove(struct ps_device *dev) | |
| { | |
| guard(mutex)(&ps_devices_lock); | |
| list_del(&dev->list); | |
| return 0; | |
| } | |
| static int ps_device_set_player_id(struct ps_device *dev) | |
| { | |
| int ret = ida_alloc(&ps_player_id_allocator, GFP_KERNEL); | |
| if (ret < 0) | |
| return ret; | |
| dev->player_id = ret; | |
| return 0; | |
| } | |
| static void ps_device_release_player_id(struct ps_device *dev) | |
| { | |
| ida_free(&ps_player_id_allocator, dev->player_id); | |
| dev->player_id = U32_MAX; | |
| } | |
| static struct input_dev *ps_allocate_input_dev(struct hid_device *hdev, | |
| const char *name_suffix) | |
| { | |
| struct input_dev *input_dev; | |
| input_dev = devm_input_allocate_device(&hdev->dev); | |
| if (!input_dev) | |
| return ERR_PTR(-ENOMEM); | |
| input_dev->id.bustype = hdev->bus; | |
| input_dev->id.vendor = hdev->vendor; | |
| input_dev->id.product = hdev->product; | |
| input_dev->id.version = hdev->version; | |
| input_dev->uniq = hdev->uniq; | |
| if (name_suffix) { | |
| input_dev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s %s", | |
| hdev->name, name_suffix); | |
| if (!input_dev->name) | |
| return ERR_PTR(-ENOMEM); | |
| } else { | |
| input_dev->name = hdev->name; | |
| } | |
| input_set_drvdata(input_dev, hdev); | |
| return input_dev; | |
| } | |
| static enum power_supply_property ps_power_supply_props[] = { | |
| POWER_SUPPLY_PROP_STATUS, | |
| POWER_SUPPLY_PROP_PRESENT, | |
| POWER_SUPPLY_PROP_CAPACITY, | |
| POWER_SUPPLY_PROP_SCOPE, | |
| }; | |
| static int ps_battery_get_property(struct power_supply *psy, | |
| enum power_supply_property psp, | |
| union power_supply_propval *val) | |
| { | |
| struct ps_device *dev = power_supply_get_drvdata(psy); | |
| u8 battery_capacity; | |
| int battery_status; | |
| int ret = 0; | |
| scoped_guard(spinlock_irqsave, &dev->lock) { | |
| battery_capacity = dev->battery_capacity; | |
| battery_status = dev->battery_status; | |
| } | |
| switch (psp) { | |
| case POWER_SUPPLY_PROP_STATUS: | |
| val->intval = battery_status; | |
| break; | |
| case POWER_SUPPLY_PROP_PRESENT: | |
| val->intval = 1; | |
| break; | |
| case POWER_SUPPLY_PROP_CAPACITY: | |
| val->intval = battery_capacity; | |
| break; | |
| case POWER_SUPPLY_PROP_SCOPE: | |
| val->intval = POWER_SUPPLY_SCOPE_DEVICE; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int ps_device_register_battery(struct ps_device *dev) | |
| { | |
| struct power_supply *battery; | |
| struct power_supply_config battery_cfg = { .drv_data = dev }; | |
| int ret; | |
| dev->battery_desc.type = POWER_SUPPLY_TYPE_BATTERY; | |
| dev->battery_desc.properties = ps_power_supply_props; | |
| dev->battery_desc.num_properties = ARRAY_SIZE(ps_power_supply_props); | |
| dev->battery_desc.get_property = ps_battery_get_property; | |
| dev->battery_desc.name = devm_kasprintf(&dev->hdev->dev, GFP_KERNEL, | |
| "ps-controller-battery-%pMR", dev->mac_address); | |
| if (!dev->battery_desc.name) | |
| return -ENOMEM; | |
| battery = devm_power_supply_register(&dev->hdev->dev, &dev->battery_desc, &battery_cfg); | |
| if (IS_ERR(battery)) { | |
| ret = PTR_ERR(battery); | |
| hid_err(dev->hdev, "Unable to register battery device: %d\n", ret); | |
| return ret; | |
| } | |
| dev->battery = battery; | |
| ret = power_supply_powers(dev->battery, &dev->hdev->dev); | |
| if (ret) { | |
| hid_err(dev->hdev, "Unable to activate battery device: %d\n", ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /* Compute crc32 of HID data and compare against expected CRC. */ | |
| static bool ps_check_crc32(u8 seed, u8 *data, size_t len, u32 report_crc) | |
| { | |
| u32 crc; | |
| crc = crc32_le(0xFFFFFFFF, &seed, 1); | |
| crc = ~crc32_le(crc, data, len); | |
| return crc == report_crc; | |
| } | |
| static struct input_dev * | |
| ps_gamepad_create(struct hid_device *hdev, | |
| int (*play_effect)(struct input_dev *, void *, struct ff_effect *)) | |
| { | |
| struct input_dev *gamepad; | |
| unsigned int i; | |
| int ret; | |
| gamepad = ps_allocate_input_dev(hdev, NULL); | |
| if (IS_ERR(gamepad)) | |
| return ERR_CAST(gamepad); | |
| /* Set initial resting state for joysticks to 128 (center) */ | |
| input_set_abs_params(gamepad, ABS_X, 0, 255, 0, 0); | |
| gamepad->absinfo[ABS_X].value = 128; | |
| input_set_abs_params(gamepad, ABS_Y, 0, 255, 0, 0); | |
| gamepad->absinfo[ABS_Y].value = 128; | |
| input_set_abs_params(gamepad, ABS_Z, 0, 255, 0, 0); | |
| input_set_abs_params(gamepad, ABS_RX, 0, 255, 0, 0); | |
| gamepad->absinfo[ABS_RX].value = 128; | |
| input_set_abs_params(gamepad, ABS_RY, 0, 255, 0, 0); | |
| gamepad->absinfo[ABS_RY].value = 128; | |
| input_set_abs_params(gamepad, ABS_RZ, 0, 255, 0, 0); | |
| input_set_abs_params(gamepad, ABS_HAT0X, -1, 1, 0, 0); | |
| input_set_abs_params(gamepad, ABS_HAT0Y, -1, 1, 0, 0); | |
| for (i = 0; i < ARRAY_SIZE(ps_gamepad_buttons); i++) | |
| input_set_capability(gamepad, EV_KEY, ps_gamepad_buttons[i]); | |
| #if IS_ENABLED(CONFIG_PLAYSTATION_FF) | |
| if (play_effect) { | |
| input_set_capability(gamepad, EV_FF, FF_RUMBLE); | |
| ret = input_ff_create_memless(gamepad, NULL, play_effect); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| } | |
| #endif | |
| ret = input_register_device(gamepad); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| return gamepad; | |
| } | |
| static int ps_get_report(struct hid_device *hdev, u8 report_id, u8 *buf, | |
| size_t size, bool check_crc) | |
| { | |
| int ret; | |
| ret = hid_hw_raw_request(hdev, report_id, buf, size, HID_FEATURE_REPORT, | |
| HID_REQ_GET_REPORT); | |
| if (ret < 0) { | |
| hid_err(hdev, "Failed to retrieve feature with reportID %d: %d\n", report_id, ret); | |
| return ret; | |
| } | |
| if (ret != size) { | |
| hid_err(hdev, "Invalid byte count transferred, expected %zu got %d\n", size, ret); | |
| return -EINVAL; | |
| } | |
| if (buf[0] != report_id) { | |
| hid_err(hdev, "Invalid reportID received, expected %d got %d\n", report_id, buf[0]); | |
| return -EINVAL; | |
| } | |
| if (hdev->bus == BUS_BLUETOOTH && check_crc) { | |
| /* Last 4 bytes contains crc32. */ | |
| u8 crc_offset = size - 4; | |
| u32 report_crc = get_unaligned_le32(&buf[crc_offset]); | |
| if (!ps_check_crc32(PS_FEATURE_CRC32_SEED, buf, crc_offset, report_crc)) { | |
| hid_err(hdev, "CRC check failed for reportID=%d\n", report_id); | |
| return -EILSEQ; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int ps_led_register(struct ps_device *ps_dev, struct led_classdev *led, | |
| const struct ps_led_info *led_info) | |
| { | |
| int ret; | |
| if (led_info->name) { | |
| led->name = devm_kasprintf(&ps_dev->hdev->dev, GFP_KERNEL, "%s:%s:%s", | |
| ps_dev->input_dev_name, led_info->color, | |
| led_info->name); | |
| } else { | |
| /* Backwards compatible mode for hid-sony, but not compliant | |
| * with LED class spec. | |
| */ | |
| led->name = devm_kasprintf(&ps_dev->hdev->dev, GFP_KERNEL, "%s:%s", | |
| ps_dev->input_dev_name, led_info->color); | |
| } | |
| if (!led->name) | |
| return -ENOMEM; | |
| led->brightness = 0; | |
| led->max_brightness = led_info->max_brightness; | |
| led->flags = LED_CORE_SUSPENDRESUME; | |
| led->brightness_get = led_info->brightness_get; | |
| led->brightness_set_blocking = led_info->brightness_set; | |
| led->blink_set = led_info->blink_set; | |
| ret = devm_led_classdev_register(&ps_dev->hdev->dev, led); | |
| if (ret) { | |
| hid_err(ps_dev->hdev, "Failed to register LED %s: %d\n", led_info->name, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /* Register a DualSense/DualShock4 RGB lightbar represented by a multicolor LED. */ | |
| static int ps_lightbar_register(struct ps_device *ps_dev, struct led_classdev_mc *lightbar_mc_dev, | |
| int (*brightness_set)(struct led_classdev *, enum led_brightness)) | |
| { | |
| struct hid_device *hdev = ps_dev->hdev; | |
| struct mc_subled *mc_led_info; | |
| struct led_classdev *led_cdev; | |
| int ret; | |
| mc_led_info = devm_kmalloc_array(&hdev->dev, 3, sizeof(*mc_led_info), | |
| GFP_KERNEL | __GFP_ZERO); | |
| if (!mc_led_info) | |
| return -ENOMEM; | |
| mc_led_info[0].color_index = LED_COLOR_ID_RED; | |
| mc_led_info[1].color_index = LED_COLOR_ID_GREEN; | |
| mc_led_info[2].color_index = LED_COLOR_ID_BLUE; | |
| lightbar_mc_dev->subled_info = mc_led_info; | |
| lightbar_mc_dev->num_colors = 3; | |
| led_cdev = &lightbar_mc_dev->led_cdev; | |
| led_cdev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s:rgb:indicator", | |
| ps_dev->input_dev_name); | |
| if (!led_cdev->name) | |
| return -ENOMEM; | |
| led_cdev->brightness = 255; | |
| led_cdev->max_brightness = 255; | |
| led_cdev->brightness_set_blocking = brightness_set; | |
| ret = devm_led_classdev_multicolor_register(&hdev->dev, lightbar_mc_dev); | |
| if (ret < 0) { | |
| hid_err(hdev, "Cannot register multicolor LED device\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static struct input_dev *ps_sensors_create(struct hid_device *hdev, int accel_range, | |
| int accel_res, int gyro_range, int gyro_res) | |
| { | |
| struct input_dev *sensors; | |
| int ret; | |
| sensors = ps_allocate_input_dev(hdev, "Motion Sensors"); | |
| if (IS_ERR(sensors)) | |
| return ERR_CAST(sensors); | |
| __set_bit(INPUT_PROP_ACCELEROMETER, sensors->propbit); | |
| __set_bit(EV_MSC, sensors->evbit); | |
| __set_bit(MSC_TIMESTAMP, sensors->mscbit); | |
| /* Accelerometer */ | |
| input_set_abs_params(sensors, ABS_X, -accel_range, accel_range, 16, 0); | |
| input_set_abs_params(sensors, ABS_Y, -accel_range, accel_range, 16, 0); | |
| input_set_abs_params(sensors, ABS_Z, -accel_range, accel_range, 16, 0); | |
| input_abs_set_res(sensors, ABS_X, accel_res); | |
| input_abs_set_res(sensors, ABS_Y, accel_res); | |
| input_abs_set_res(sensors, ABS_Z, accel_res); | |
| /* Gyroscope */ | |
| input_set_abs_params(sensors, ABS_RX, -gyro_range, gyro_range, 16, 0); | |
| input_set_abs_params(sensors, ABS_RY, -gyro_range, gyro_range, 16, 0); | |
| input_set_abs_params(sensors, ABS_RZ, -gyro_range, gyro_range, 16, 0); | |
| input_abs_set_res(sensors, ABS_RX, gyro_res); | |
| input_abs_set_res(sensors, ABS_RY, gyro_res); | |
| input_abs_set_res(sensors, ABS_RZ, gyro_res); | |
| ret = input_register_device(sensors); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| return sensors; | |
| } | |
| static struct input_dev *ps_touchpad_create(struct hid_device *hdev, int width, | |
| int height, unsigned int num_contacts) | |
| { | |
| struct input_dev *touchpad; | |
| int ret; | |
| touchpad = ps_allocate_input_dev(hdev, "Touchpad"); | |
| if (IS_ERR(touchpad)) | |
| return ERR_CAST(touchpad); | |
| /* Map button underneath touchpad to BTN_LEFT. */ | |
| input_set_capability(touchpad, EV_KEY, BTN_LEFT); | |
| __set_bit(INPUT_PROP_BUTTONPAD, touchpad->propbit); | |
| input_set_abs_params(touchpad, ABS_MT_POSITION_X, 0, width - 1, 0, 0); | |
| input_set_abs_params(touchpad, ABS_MT_POSITION_Y, 0, height - 1, 0, 0); | |
| ret = input_mt_init_slots(touchpad, num_contacts, INPUT_MT_POINTER); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| ret = input_register_device(touchpad); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| return touchpad; | |
| } | |
| static struct input_dev *ps_headset_jack_create(struct hid_device *hdev) | |
| { | |
| struct input_dev *jack; | |
| int ret; | |
| jack = ps_allocate_input_dev(hdev, "Headset Jack"); | |
| if (IS_ERR(jack)) | |
| return ERR_CAST(jack); | |
| input_set_capability(jack, EV_SW, SW_HEADPHONE_INSERT); | |
| input_set_capability(jack, EV_SW, SW_MICROPHONE_INSERT); | |
| ret = input_register_device(jack); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| return jack; | |
| } | |
| static ssize_t firmware_version_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hid_device *hdev = to_hid_device(dev); | |
| struct ps_device *ps_dev = hid_get_drvdata(hdev); | |
| return sysfs_emit(buf, "0x%08x\n", ps_dev->fw_version); | |
| } | |
| static DEVICE_ATTR_RO(firmware_version); | |
| static ssize_t hardware_version_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct hid_device *hdev = to_hid_device(dev); | |
| struct ps_device *ps_dev = hid_get_drvdata(hdev); | |
| return sysfs_emit(buf, "0x%08x\n", ps_dev->hw_version); | |
| } | |
| static DEVICE_ATTR_RO(hardware_version); | |
| static struct attribute *ps_device_attrs[] = { | |
| &dev_attr_firmware_version.attr, | |
| &dev_attr_hardware_version.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(ps_device); | |
| static int dualsense_get_calibration_data(struct dualsense *ds) | |
| { | |
| struct hid_device *hdev = ds->base.hdev; | |
| short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus; | |
| short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus; | |
| short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus; | |
| short gyro_speed_plus, gyro_speed_minus; | |
| short acc_x_plus, acc_x_minus; | |
| short acc_y_plus, acc_y_minus; | |
| short acc_z_plus, acc_z_minus; | |
| int speed_2x; | |
| int range_2g; | |
| int ret = 0; | |
| int i; | |
| u8 *buf; | |
| buf = kzalloc(DS_FEATURE_REPORT_CALIBRATION_SIZE, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_CALIBRATION, buf, | |
| DS_FEATURE_REPORT_CALIBRATION_SIZE, true); | |
| if (ret) { | |
| hid_err(ds->base.hdev, "Failed to retrieve DualSense calibration info: %d\n", ret); | |
| goto err_free; | |
| } | |
| gyro_pitch_bias = get_unaligned_le16(&buf[1]); | |
| gyro_yaw_bias = get_unaligned_le16(&buf[3]); | |
| gyro_roll_bias = get_unaligned_le16(&buf[5]); | |
| gyro_pitch_plus = get_unaligned_le16(&buf[7]); | |
| gyro_pitch_minus = get_unaligned_le16(&buf[9]); | |
| gyro_yaw_plus = get_unaligned_le16(&buf[11]); | |
| gyro_yaw_minus = get_unaligned_le16(&buf[13]); | |
| gyro_roll_plus = get_unaligned_le16(&buf[15]); | |
| gyro_roll_minus = get_unaligned_le16(&buf[17]); | |
| gyro_speed_plus = get_unaligned_le16(&buf[19]); | |
| gyro_speed_minus = get_unaligned_le16(&buf[21]); | |
| acc_x_plus = get_unaligned_le16(&buf[23]); | |
| acc_x_minus = get_unaligned_le16(&buf[25]); | |
| acc_y_plus = get_unaligned_le16(&buf[27]); | |
| acc_y_minus = get_unaligned_le16(&buf[29]); | |
| acc_z_plus = get_unaligned_le16(&buf[31]); | |
| acc_z_minus = get_unaligned_le16(&buf[33]); | |
| /* | |
| * Set gyroscope calibration and normalization parameters. | |
| * Data values will be normalized to 1/DS_GYRO_RES_PER_DEG_S degree/s. | |
| */ | |
| speed_2x = (gyro_speed_plus + gyro_speed_minus); | |
| ds->gyro_calib_data[0].abs_code = ABS_RX; | |
| ds->gyro_calib_data[0].bias = 0; | |
| ds->gyro_calib_data[0].sens_numer = speed_2x * DS_GYRO_RES_PER_DEG_S; | |
| ds->gyro_calib_data[0].sens_denom = abs(gyro_pitch_plus - gyro_pitch_bias) + | |
| abs(gyro_pitch_minus - gyro_pitch_bias); | |
| ds->gyro_calib_data[1].abs_code = ABS_RY; | |
| ds->gyro_calib_data[1].bias = 0; | |
| ds->gyro_calib_data[1].sens_numer = speed_2x * DS_GYRO_RES_PER_DEG_S; | |
| ds->gyro_calib_data[1].sens_denom = abs(gyro_yaw_plus - gyro_yaw_bias) + | |
| abs(gyro_yaw_minus - gyro_yaw_bias); | |
| ds->gyro_calib_data[2].abs_code = ABS_RZ; | |
| ds->gyro_calib_data[2].bias = 0; | |
| ds->gyro_calib_data[2].sens_numer = speed_2x * DS_GYRO_RES_PER_DEG_S; | |
| ds->gyro_calib_data[2].sens_denom = abs(gyro_roll_plus - gyro_roll_bias) + | |
| abs(gyro_roll_minus - gyro_roll_bias); | |
| /* | |
| * Sanity check gyro calibration data. This is needed to prevent crashes | |
| * during report handling of virtual, clone or broken devices not implementing | |
| * calibration data properly. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(ds->gyro_calib_data); i++) { | |
| if (ds->gyro_calib_data[i].sens_denom == 0) { | |
| hid_warn(hdev, | |
| "Invalid gyro calibration data for axis (%d), disabling calibration.", | |
| ds->gyro_calib_data[i].abs_code); | |
| ds->gyro_calib_data[i].bias = 0; | |
| ds->gyro_calib_data[i].sens_numer = DS_GYRO_RANGE; | |
| ds->gyro_calib_data[i].sens_denom = S16_MAX; | |
| } | |
| } | |
| /* | |
| * Set accelerometer calibration and normalization parameters. | |
| * Data values will be normalized to 1/DS_ACC_RES_PER_G g. | |
| */ | |
| range_2g = acc_x_plus - acc_x_minus; | |
| ds->accel_calib_data[0].abs_code = ABS_X; | |
| ds->accel_calib_data[0].bias = acc_x_plus - range_2g / 2; | |
| ds->accel_calib_data[0].sens_numer = 2 * DS_ACC_RES_PER_G; | |
| ds->accel_calib_data[0].sens_denom = range_2g; | |
| range_2g = acc_y_plus - acc_y_minus; | |
| ds->accel_calib_data[1].abs_code = ABS_Y; | |
| ds->accel_calib_data[1].bias = acc_y_plus - range_2g / 2; | |
| ds->accel_calib_data[1].sens_numer = 2 * DS_ACC_RES_PER_G; | |
| ds->accel_calib_data[1].sens_denom = range_2g; | |
| range_2g = acc_z_plus - acc_z_minus; | |
| ds->accel_calib_data[2].abs_code = ABS_Z; | |
| ds->accel_calib_data[2].bias = acc_z_plus - range_2g / 2; | |
| ds->accel_calib_data[2].sens_numer = 2 * DS_ACC_RES_PER_G; | |
| ds->accel_calib_data[2].sens_denom = range_2g; | |
| /* | |
| * Sanity check accelerometer calibration data. This is needed to prevent crashes | |
| * during report handling of virtual, clone or broken devices not implementing calibration | |
| * data properly. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(ds->accel_calib_data); i++) { | |
| if (ds->accel_calib_data[i].sens_denom == 0) { | |
| hid_warn(hdev, | |
| "Invalid accelerometer calibration data for axis (%d), disabling calibration.", | |
| ds->accel_calib_data[i].abs_code); | |
| ds->accel_calib_data[i].bias = 0; | |
| ds->accel_calib_data[i].sens_numer = DS_ACC_RANGE; | |
| ds->accel_calib_data[i].sens_denom = S16_MAX; | |
| } | |
| } | |
| err_free: | |
| kfree(buf); | |
| return ret; | |
| } | |
| static int dualsense_get_firmware_info(struct dualsense *ds) | |
| { | |
| u8 *buf; | |
| int ret; | |
| buf = kzalloc(DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_FIRMWARE_INFO, buf, | |
| DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE, true); | |
| if (ret) { | |
| hid_err(ds->base.hdev, "Failed to retrieve DualSense firmware info: %d\n", ret); | |
| goto err_free; | |
| } | |
| ds->base.hw_version = get_unaligned_le32(&buf[24]); | |
| ds->base.fw_version = get_unaligned_le32(&buf[28]); | |
| /* Update version is some kind of feature version. It is distinct from | |
| * the firmware version as there can be many different variations of a | |
| * controller over time with the same physical shell, but with different | |
| * PCBs and other internal changes. The update version (internal name) is | |
| * used as a means to detect what features are available and change behavior. | |
| * Note: the version is different between DualSense and DualSense Edge. | |
| */ | |
| ds->update_version = get_unaligned_le16(&buf[44]); | |
| err_free: | |
| kfree(buf); | |
| return ret; | |
| } | |
| static int dualsense_get_mac_address(struct dualsense *ds) | |
| { | |
| u8 *buf; | |
| int ret = 0; | |
| buf = kzalloc(DS_FEATURE_REPORT_PAIRING_INFO_SIZE, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_PAIRING_INFO, buf, | |
| DS_FEATURE_REPORT_PAIRING_INFO_SIZE, true); | |
| if (ret) { | |
| hid_err(ds->base.hdev, "Failed to retrieve DualSense pairing info: %d\n", ret); | |
| goto err_free; | |
| } | |
| memcpy(ds->base.mac_address, &buf[1], sizeof(ds->base.mac_address)); | |
| err_free: | |
| kfree(buf); | |
| return ret; | |
| } | |
| static int dualsense_lightbar_set_brightness(struct led_classdev *cdev, | |
| enum led_brightness brightness) | |
| { | |
| struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev); | |
| struct dualsense *ds = container_of(mc_cdev, struct dualsense, lightbar); | |
| u8 red, green, blue; | |
| led_mc_calc_color_components(mc_cdev, brightness); | |
| red = mc_cdev->subled_info[0].brightness; | |
| green = mc_cdev->subled_info[1].brightness; | |
| blue = mc_cdev->subled_info[2].brightness; | |
| dualsense_set_lightbar(ds, red, green, blue); | |
| return 0; | |
| } | |
| static enum led_brightness dualsense_player_led_get_brightness(struct led_classdev *led) | |
| { | |
| struct hid_device *hdev = to_hid_device(led->dev->parent); | |
| struct dualsense *ds = hid_get_drvdata(hdev); | |
| return !!(ds->player_leds_state & BIT(led - ds->player_leds)); | |
| } | |
| static int dualsense_player_led_set_brightness(struct led_classdev *led, enum led_brightness value) | |
| { | |
| struct hid_device *hdev = to_hid_device(led->dev->parent); | |
| struct dualsense *ds = hid_get_drvdata(hdev); | |
| unsigned int led_index; | |
| scoped_guard(spinlock_irqsave, &ds->base.lock) { | |
| led_index = led - ds->player_leds; | |
| if (value == LED_OFF) | |
| ds->player_leds_state &= ~BIT(led_index); | |
| else | |
| ds->player_leds_state |= BIT(led_index); | |
| ds->update_player_leds = true; | |
| } | |
| dualsense_schedule_work(ds); | |
| return 0; | |
| } | |
| static void dualsense_init_output_report(struct dualsense *ds, | |
| struct dualsense_output_report *rp, void *buf) | |
| { | |
| struct hid_device *hdev = ds->base.hdev; | |
| if (hdev->bus == BUS_BLUETOOTH) { | |
| struct dualsense_output_report_bt *bt = buf; | |
| memset(bt, 0, sizeof(*bt)); | |
| bt->report_id = DS_OUTPUT_REPORT_BT; | |
| bt->tag = DS_OUTPUT_TAG; /* Tag must be set. Exact meaning is unclear. */ | |
| /* | |
| * Highest 4-bit is a sequence number, which needs to be increased | |
| * every report. Lowest 4-bit is tag and can be zero for now. | |
| */ | |
| bt->seq_tag = FIELD_PREP(DS_OUTPUT_SEQ_NO, ds->output_seq) | | |
| FIELD_PREP(DS_OUTPUT_SEQ_TAG, 0x0); | |
| if (++ds->output_seq == 16) | |
| ds->output_seq = 0; | |
| rp->data = buf; | |
| rp->len = sizeof(*bt); | |
| rp->bt = bt; | |
| rp->usb = NULL; | |
| rp->common = &bt->common; | |
| } else { /* USB */ | |
| struct dualsense_output_report_usb *usb = buf; | |
| memset(usb, 0, sizeof(*usb)); | |
| usb->report_id = DS_OUTPUT_REPORT_USB; | |
| rp->data = buf; | |
| rp->len = sizeof(*usb); | |
| rp->bt = NULL; | |
| rp->usb = usb; | |
| rp->common = &usb->common; | |
| } | |
| } | |
| static inline void dualsense_schedule_work(struct dualsense *ds) | |
| { | |
| /* Using scoped_guard() instead of guard() to make sparse happy */ | |
| scoped_guard(spinlock_irqsave, &ds->base.lock) | |
| if (ds->output_worker_initialized) | |
| schedule_work(&ds->output_worker); | |
| } | |
| /* | |
| * Helper function to send DualSense output reports. Applies a CRC at the end of a report | |
| * for Bluetooth reports. | |
| */ | |
| static void dualsense_send_output_report(struct dualsense *ds, | |
| struct dualsense_output_report *report) | |
| { | |
| struct hid_device *hdev = ds->base.hdev; | |
| /* Bluetooth packets need to be signed with a CRC in the last 4 bytes. */ | |
| if (report->bt) { | |
| u32 crc; | |
| u8 seed = PS_OUTPUT_CRC32_SEED; | |
| crc = crc32_le(0xFFFFFFFF, &seed, 1); | |
| crc = ~crc32_le(crc, report->data, report->len - 4); | |
| report->bt->crc32 = cpu_to_le32(crc); | |
| } | |
| hid_hw_output_report(hdev, report->data, report->len); | |
| } | |
| static void dualsense_output_worker(struct work_struct *work) | |
| { | |
| struct dualsense *ds = container_of(work, struct dualsense, output_worker); | |
| struct dualsense_output_report report; | |
| struct dualsense_output_report_common *common; | |
| dualsense_init_output_report(ds, &report, ds->output_report_dmabuf); | |
| common = report.common; | |
| scoped_guard(spinlock_irqsave, &ds->base.lock) { | |
| if (ds->update_rumble) { | |
| /* Select classic rumble style haptics and enable it. */ | |
| common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT; | |
| if (ds->use_vibration_v2) | |
| common->valid_flag2 |= DS_OUTPUT_VALID_FLAG2_COMPATIBLE_VIBRATION2; | |
| else | |
| common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION; | |
| common->motor_left = ds->motor_left; | |
| common->motor_right = ds->motor_right; | |
| ds->update_rumble = false; | |
| } | |
| if (ds->update_lightbar) { | |
| common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE; | |
| common->lightbar_red = ds->lightbar_red; | |
| common->lightbar_green = ds->lightbar_green; | |
| common->lightbar_blue = ds->lightbar_blue; | |
| ds->update_lightbar = false; | |
| } | |
| if (ds->update_player_leds) { | |
| common->valid_flag1 |= | |
| DS_OUTPUT_VALID_FLAG1_PLAYER_INDICATOR_CONTROL_ENABLE; | |
| common->player_leds = ds->player_leds_state; | |
| ds->update_player_leds = false; | |
| } | |
| if (ds->plugged_state != ds->prev_plugged_state) { | |
| u8 val = ds->plugged_state & DS_STATUS1_HP_DETECT; | |
| if (val != (ds->prev_plugged_state & DS_STATUS1_HP_DETECT)) { | |
| common->valid_flag0 = DS_OUTPUT_VALID_FLAG0_AUDIO_CONTROL_ENABLE; | |
| /* | |
| * _--------> Output path setup in audio_flag0 | |
| * / _------> Headphone (HP) Left channel sink | |
| * | / _----> Headphone (HP) Right channel sink | |
| * | | / _--> Internal Speaker (SP) sink | |
| * | | | / | |
| * | | | | L/R - Left/Right channel source | |
| * 0 L-R X X - Unrouted (muted) channel source | |
| * 1 L-L X | |
| * 2 L-L R | |
| * 3 X-X R | |
| */ | |
| if (val) { | |
| /* Mute SP and route L+R channels to HP */ | |
| common->audio_control = 0; | |
| } else { | |
| /* Mute HP and route R channel to SP */ | |
| common->audio_control = | |
| FIELD_PREP(DS_OUTPUT_AUDIO_FLAGS_OUTPUT_PATH_SEL, | |
| 0x3); | |
| /* | |
| * Set SP hardware volume to 100%. | |
| * Note the accepted range seems to be [0x3d..0x64] | |
| */ | |
| common->valid_flag0 |= | |
| DS_OUTPUT_VALID_FLAG0_SPEAKER_VOLUME_ENABLE; | |
| common->speaker_volume = 0x64; | |
| /* Set SP preamp gain to +6dB */ | |
| common->valid_flag1 = | |
| DS_OUTPUT_VALID_FLAG1_AUDIO_CONTROL2_ENABLE; | |
| common->audio_control2 = | |
| FIELD_PREP(DS_OUTPUT_AUDIO_FLAGS2_SP_PREAMP_GAIN, | |
| 0x2); | |
| } | |
| input_report_switch(ds->jack, SW_HEADPHONE_INSERT, val); | |
| } | |
| val = ds->plugged_state & DS_STATUS1_MIC_DETECT; | |
| if (val != (ds->prev_plugged_state & DS_STATUS1_MIC_DETECT)) | |
| input_report_switch(ds->jack, SW_MICROPHONE_INSERT, val); | |
| input_sync(ds->jack); | |
| ds->prev_plugged_state = ds->plugged_state; | |
| } | |
| if (ds->update_mic_mute) { | |
| common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_MIC_MUTE_LED_CONTROL_ENABLE; | |
| common->mute_button_led = ds->mic_muted; | |
| if (ds->mic_muted) { | |
| /* Disable microphone */ | |
| common->valid_flag1 |= | |
| DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE; | |
| common->power_save_control |= DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE; | |
| } else { | |
| /* Enable microphone */ | |
| common->valid_flag1 |= | |
| DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE; | |
| common->power_save_control &= | |
| ~DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE; | |
| } | |
| ds->update_mic_mute = false; | |
| } | |
| } | |
| dualsense_send_output_report(ds, &report); | |
| } | |
| static int dualsense_parse_report(struct ps_device *ps_dev, struct hid_report *report, | |
| u8 *data, int size) | |
| { | |
| struct hid_device *hdev = ps_dev->hdev; | |
| struct dualsense *ds = container_of(ps_dev, struct dualsense, base); | |
| struct dualsense_input_report *ds_report; | |
| u8 battery_data, battery_capacity, charging_status, value; | |
| int battery_status; | |
| u32 sensor_timestamp; | |
| bool btn_mic_state; | |
| int i; | |
| /* | |
| * DualSense in USB uses the full HID report for reportID 1, but | |
| * Bluetooth uses a minimal HID report for reportID 1 and reports | |
| * the full report using reportID 49. | |
| */ | |
| if (hdev->bus == BUS_USB && report->id == DS_INPUT_REPORT_USB && | |
| size == DS_INPUT_REPORT_USB_SIZE) { | |
| ds_report = (struct dualsense_input_report *)&data[1]; | |
| } else if (hdev->bus == BUS_BLUETOOTH && report->id == DS_INPUT_REPORT_BT && | |
| size == DS_INPUT_REPORT_BT_SIZE) { | |
| /* Last 4 bytes of input report contain crc32 */ | |
| u32 report_crc = get_unaligned_le32(&data[size - 4]); | |
| if (!ps_check_crc32(PS_INPUT_CRC32_SEED, data, size - 4, report_crc)) { | |
| hid_err(hdev, "DualSense input CRC's check failed\n"); | |
| return -EILSEQ; | |
| } | |
| ds_report = (struct dualsense_input_report *)&data[2]; | |
| } else { | |
| hid_err(hdev, "Unhandled reportID=%d\n", report->id); | |
| return -1; | |
| } | |
| input_report_abs(ds->gamepad, ABS_X, ds_report->x); | |
| input_report_abs(ds->gamepad, ABS_Y, ds_report->y); | |
| input_report_abs(ds->gamepad, ABS_RX, ds_report->rx); | |
| input_report_abs(ds->gamepad, ABS_RY, ds_report->ry); | |
| input_report_abs(ds->gamepad, ABS_Z, ds_report->z); | |
| input_report_abs(ds->gamepad, ABS_RZ, ds_report->rz); | |
| value = ds_report->buttons[0] & DS_BUTTONS0_HAT_SWITCH; | |
| if (value >= ARRAY_SIZE(ps_gamepad_hat_mapping)) | |
| value = 8; /* center */ | |
| input_report_abs(ds->gamepad, ABS_HAT0X, ps_gamepad_hat_mapping[value].x); | |
| input_report_abs(ds->gamepad, ABS_HAT0Y, ps_gamepad_hat_mapping[value].y); | |
| input_report_key(ds->gamepad, BTN_WEST, ds_report->buttons[0] & DS_BUTTONS0_SQUARE); | |
| input_report_key(ds->gamepad, BTN_SOUTH, ds_report->buttons[0] & DS_BUTTONS0_CROSS); | |
| input_report_key(ds->gamepad, BTN_EAST, ds_report->buttons[0] & DS_BUTTONS0_CIRCLE); | |
| input_report_key(ds->gamepad, BTN_NORTH, ds_report->buttons[0] & DS_BUTTONS0_TRIANGLE); | |
| input_report_key(ds->gamepad, BTN_TL, ds_report->buttons[1] & DS_BUTTONS1_L1); | |
| input_report_key(ds->gamepad, BTN_TR, ds_report->buttons[1] & DS_BUTTONS1_R1); | |
| input_report_key(ds->gamepad, BTN_TL2, ds_report->buttons[1] & DS_BUTTONS1_L2); | |
| input_report_key(ds->gamepad, BTN_TR2, ds_report->buttons[1] & DS_BUTTONS1_R2); | |
| input_report_key(ds->gamepad, BTN_SELECT, ds_report->buttons[1] & DS_BUTTONS1_CREATE); | |
| input_report_key(ds->gamepad, BTN_START, ds_report->buttons[1] & DS_BUTTONS1_OPTIONS); | |
| input_report_key(ds->gamepad, BTN_THUMBL, ds_report->buttons[1] & DS_BUTTONS1_L3); | |
| input_report_key(ds->gamepad, BTN_THUMBR, ds_report->buttons[1] & DS_BUTTONS1_R3); | |
| input_report_key(ds->gamepad, BTN_MODE, ds_report->buttons[2] & DS_BUTTONS2_PS_HOME); | |
| if (ds->is_edge) { | |
| input_report_key(ds->gamepad, BTN_TRIGGER_HAPPY1, | |
| ds_report->buttons[2] & DS_EDGE_BUTTONS_FN1); | |
| input_report_key(ds->gamepad, BTN_TRIGGER_HAPPY2, | |
| ds_report->buttons[2] & DS_EDGE_BUTTONS_FN2); | |
| input_report_key(ds->gamepad, BTN_TRIGGER_HAPPY3, | |
| ds_report->buttons[2] & DS_EDGE_BUTTONS_LEFT_PADDLE); | |
| input_report_key(ds->gamepad, BTN_TRIGGER_HAPPY4, | |
| ds_report->buttons[2] & DS_EDGE_BUTTONS_RIGHT_PADDLE); | |
| } | |
| input_sync(ds->gamepad); | |
| /* | |
| * The DualSense has an internal microphone, which can be muted through a mute button | |
| * on the device. The driver is expected to read the button state and program the device | |
| * to mute/unmute audio at the hardware level. | |
| */ | |
| btn_mic_state = !!(ds_report->buttons[2] & DS_BUTTONS2_MIC_MUTE); | |
| if (btn_mic_state && !ds->last_btn_mic_state) { | |
| scoped_guard(spinlock_irqsave, &ps_dev->lock) { | |
| ds->update_mic_mute = true; | |
| ds->mic_muted = !ds->mic_muted; /* toggle */ | |
| } | |
| /* Schedule updating of microphone state at hardware level. */ | |
| dualsense_schedule_work(ds); | |
| } | |
| ds->last_btn_mic_state = btn_mic_state; | |
| /* | |
| * Parse HP/MIC plugged state data for USB use case, since Bluetooth | |
| * audio is currently not supported. | |
| */ | |
| if (hdev->bus == BUS_USB) { | |
| value = ds_report->status[1] & DS_STATUS1_JACK_DETECT; | |
| if (!ds->prev_plugged_state_valid) { | |
| /* Initial handling of the plugged state report */ | |
| scoped_guard(spinlock_irqsave, &ps_dev->lock) { | |
| ds->plugged_state = (~value) & DS_STATUS1_JACK_DETECT; | |
| ds->prev_plugged_state_valid = true; | |
| } | |
| } | |
| if (value != ds->plugged_state) { | |
| scoped_guard(spinlock_irqsave, &ps_dev->lock) { | |
| ds->prev_plugged_state = ds->plugged_state; | |
| ds->plugged_state = value; | |
| } | |
| /* Schedule audio routing towards active endpoint. */ | |
| dualsense_schedule_work(ds); | |
| } | |
| } | |
| /* Parse and calibrate gyroscope data. */ | |
| for (i = 0; i < ARRAY_SIZE(ds_report->gyro); i++) { | |
| int raw_data = (short)le16_to_cpu(ds_report->gyro[i]); | |
| int calib_data = mult_frac(ds->gyro_calib_data[i].sens_numer, | |
| raw_data, ds->gyro_calib_data[i].sens_denom); | |
| input_report_abs(ds->sensors, ds->gyro_calib_data[i].abs_code, calib_data); | |
| } | |
| /* Parse and calibrate accelerometer data. */ | |
| for (i = 0; i < ARRAY_SIZE(ds_report->accel); i++) { | |
| int raw_data = (short)le16_to_cpu(ds_report->accel[i]); | |
| int calib_data = mult_frac(ds->accel_calib_data[i].sens_numer, | |
| raw_data - ds->accel_calib_data[i].bias, | |
| ds->accel_calib_data[i].sens_denom); | |
| input_report_abs(ds->sensors, ds->accel_calib_data[i].abs_code, calib_data); | |
| } | |
| /* Convert timestamp (in 0.33us unit) to timestamp_us */ | |
| sensor_timestamp = le32_to_cpu(ds_report->sensor_timestamp); | |
| if (!ds->sensor_timestamp_initialized) { | |
| ds->sensor_timestamp_us = DIV_ROUND_CLOSEST(sensor_timestamp, 3); | |
| ds->sensor_timestamp_initialized = true; | |
| } else { | |
| u32 delta; | |
| if (ds->prev_sensor_timestamp > sensor_timestamp) | |
| delta = (U32_MAX - ds->prev_sensor_timestamp + sensor_timestamp + 1); | |
| else | |
| delta = sensor_timestamp - ds->prev_sensor_timestamp; | |
| ds->sensor_timestamp_us += DIV_ROUND_CLOSEST(delta, 3); | |
| } | |
| ds->prev_sensor_timestamp = sensor_timestamp; | |
| input_event(ds->sensors, EV_MSC, MSC_TIMESTAMP, ds->sensor_timestamp_us); | |
| input_sync(ds->sensors); | |
| for (i = 0; i < ARRAY_SIZE(ds_report->points); i++) { | |
| struct dualsense_touch_point *point = &ds_report->points[i]; | |
| bool active = (point->contact & DS_TOUCH_POINT_INACTIVE) ? false : true; | |
| input_mt_slot(ds->touchpad, i); | |
| input_mt_report_slot_state(ds->touchpad, MT_TOOL_FINGER, active); | |
| if (active) { | |
| input_report_abs(ds->touchpad, ABS_MT_POSITION_X, | |
| DS_TOUCH_POINT_X(point->x_hi, point->x_lo)); | |
| input_report_abs(ds->touchpad, ABS_MT_POSITION_Y, | |
| DS_TOUCH_POINT_Y(point->y_hi, point->y_lo)); | |
| } | |
| } | |
| input_mt_sync_frame(ds->touchpad); | |
| input_report_key(ds->touchpad, BTN_LEFT, ds_report->buttons[2] & DS_BUTTONS2_TOUCHPAD); | |
| input_sync(ds->touchpad); | |
| battery_data = FIELD_GET(DS_STATUS0_BATTERY_CAPACITY, ds_report->status[0]); | |
| charging_status = FIELD_GET(DS_STATUS0_CHARGING, ds_report->status[0]); | |
| switch (charging_status) { | |
| case 0x0: | |
| /* | |
| * Each unit of battery data corresponds to 10% | |
| * 0 = 0-9%, 1 = 10-19%, .. and 10 = 100% | |
| */ | |
| battery_capacity = min(battery_data * 10 + 5, 100); | |
| battery_status = POWER_SUPPLY_STATUS_DISCHARGING; | |
| break; | |
| case 0x1: | |
| battery_capacity = min(battery_data * 10 + 5, 100); | |
| battery_status = POWER_SUPPLY_STATUS_CHARGING; | |
| break; | |
| case 0x2: | |
| battery_capacity = 100; | |
| battery_status = POWER_SUPPLY_STATUS_FULL; | |
| break; | |
| case 0xa: /* voltage or temperature out of range */ | |
| case 0xb: /* temperature error */ | |
| battery_capacity = 0; | |
| battery_status = POWER_SUPPLY_STATUS_NOT_CHARGING; | |
| break; | |
| case 0xf: /* charging error */ | |
| default: | |
| battery_capacity = 0; | |
| battery_status = POWER_SUPPLY_STATUS_UNKNOWN; | |
| } | |
| scoped_guard(spinlock_irqsave, &ps_dev->lock) { | |
| ps_dev->battery_capacity = battery_capacity; | |
| ps_dev->battery_status = battery_status; | |
| } | |
| return 0; | |
| } | |
| static int dualsense_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) | |
| { | |
| struct hid_device *hdev = input_get_drvdata(dev); | |
| struct dualsense *ds = hid_get_drvdata(hdev); | |
| if (effect->type != FF_RUMBLE) | |
| return 0; | |
| scoped_guard(spinlock_irqsave, &ds->base.lock) { | |
| ds->update_rumble = true; | |
| ds->motor_left = effect->u.rumble.strong_magnitude / 256; | |
| ds->motor_right = effect->u.rumble.weak_magnitude / 256; | |
| } | |
| dualsense_schedule_work(ds); | |
| return 0; | |
| } | |
| static void dualsense_remove(struct ps_device *ps_dev) | |
| { | |
| struct dualsense *ds = container_of(ps_dev, struct dualsense, base); | |
| scoped_guard(spinlock_irqsave, &ds->base.lock) | |
| ds->output_worker_initialized = false; | |
| cancel_work_sync(&ds->output_worker); | |
| } | |
| static int dualsense_reset_leds(struct dualsense *ds) | |
| { | |
| struct dualsense_output_report report; | |
| struct dualsense_output_report_bt *buf; | |
| buf = kzalloc_obj(*buf); | |
| if (!buf) | |
| return -ENOMEM; | |
| dualsense_init_output_report(ds, &report, buf); | |
| /* | |
| * On Bluetooth the DualSense outputs an animation on the lightbar | |
| * during startup and maintains a color afterwards. We need to explicitly | |
| * reconfigure the lightbar before we can do any programming later on. | |
| * In USB the lightbar is not on by default, but redoing the setup there | |
| * doesn't hurt. | |
| */ | |
| report.common->valid_flag2 = DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE; | |
| report.common->lightbar_setup = DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT; /* Fade light out. */ | |
| dualsense_send_output_report(ds, &report); | |
| kfree(buf); | |
| return 0; | |
| } | |
| static void dualsense_set_lightbar(struct dualsense *ds, u8 red, u8 green, u8 blue) | |
| { | |
| scoped_guard(spinlock_irqsave, &ds->base.lock) { | |
| ds->update_lightbar = true; | |
| ds->lightbar_red = red; | |
| ds->lightbar_green = green; | |
| ds->lightbar_blue = blue; | |
| } | |
| dualsense_schedule_work(ds); | |
| } | |
| static void dualsense_set_player_leds(struct dualsense *ds) | |
| { | |
| /* | |
| * The DualSense controller has a row of 5 LEDs used for player ids. | |
| * Behavior on the PlayStation 5 console is to center the player id | |
| * across the LEDs, so e.g. player 1 would be "--x--" with x being 'on'. | |
| * Follow a similar mapping here. | |
| */ | |
| static const int player_ids[5] = { | |
| BIT(2), | |
| BIT(3) | BIT(1), | |
| BIT(4) | BIT(2) | BIT(0), | |
| BIT(4) | BIT(3) | BIT(1) | BIT(0), | |
| BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0) | |
| }; | |
| u8 player_id = ds->base.player_id % ARRAY_SIZE(player_ids); | |
| ds->update_player_leds = true; | |
| ds->player_leds_state = player_ids[player_id]; | |
| dualsense_schedule_work(ds); | |
| } | |
| static struct ps_device *dualsense_create(struct hid_device *hdev) | |
| { | |
| struct dualsense *ds; | |
| struct ps_device *ps_dev; | |
| u8 max_output_report_size; | |
| int i, ret; | |
| static const struct ps_led_info player_leds_info[] = { | |
| { LED_FUNCTION_PLAYER1, "white", 1, dualsense_player_led_get_brightness, | |
| dualsense_player_led_set_brightness }, | |
| { LED_FUNCTION_PLAYER2, "white", 1, dualsense_player_led_get_brightness, | |
| dualsense_player_led_set_brightness }, | |
| { LED_FUNCTION_PLAYER3, "white", 1, dualsense_player_led_get_brightness, | |
| dualsense_player_led_set_brightness }, | |
| { LED_FUNCTION_PLAYER4, "white", 1, dualsense_player_led_get_brightness, | |
| dualsense_player_led_set_brightness }, | |
| { LED_FUNCTION_PLAYER5, "white", 1, dualsense_player_led_get_brightness, | |
| dualsense_player_led_set_brightness } | |
| }; | |
| ds = devm_kzalloc(&hdev->dev, sizeof(*ds), GFP_KERNEL); | |
| if (!ds) | |
| return ERR_PTR(-ENOMEM); | |
| /* | |
| * Patch version to allow userspace to distinguish between | |
| * hid-generic vs hid-playstation axis and button mapping. | |
| */ | |
| hdev->version |= HID_PLAYSTATION_VERSION_PATCH; | |
| ps_dev = &ds->base; | |
| ps_dev->hdev = hdev; | |
| spin_lock_init(&ps_dev->lock); | |
| ps_dev->battery_capacity = 100; /* initial value until parse_report. */ | |
| ps_dev->battery_status = POWER_SUPPLY_STATUS_UNKNOWN; | |
| ps_dev->parse_report = dualsense_parse_report; | |
| ps_dev->remove = dualsense_remove; | |
| INIT_WORK(&ds->output_worker, dualsense_output_worker); | |
| ds->output_worker_initialized = true; | |
| hid_set_drvdata(hdev, ds); | |
| max_output_report_size = sizeof(struct dualsense_output_report_bt); | |
| ds->output_report_dmabuf = devm_kzalloc(&hdev->dev, max_output_report_size, GFP_KERNEL); | |
| if (!ds->output_report_dmabuf) | |
| return ERR_PTR(-ENOMEM); | |
| ret = dualsense_get_mac_address(ds); | |
| if (ret) { | |
| hid_err(hdev, "Failed to get MAC address from DualSense\n"); | |
| return ERR_PTR(ret); | |
| } | |
| snprintf(hdev->uniq, sizeof(hdev->uniq), "%pMR", ds->base.mac_address); | |
| ret = dualsense_get_firmware_info(ds); | |
| if (ret) { | |
| hid_err(hdev, "Failed to get firmware info from DualSense\n"); | |
| return ERR_PTR(ret); | |
| } | |
| /* Original DualSense firmware simulated classic controller rumble through | |
| * its new haptics hardware. It felt different from classic rumble users | |
| * were used to. Since then new firmwares were introduced to change behavior | |
| * and make this new 'v2' behavior default on PlayStation and other platforms. | |
| * The original DualSense requires a new enough firmware as bundled with PS5 | |
| * software released in 2021. DualSense edge supports it out of the box. | |
| * Both devices also support the old mode, but it is not really used. | |
| */ | |
| if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER) { | |
| /* Feature version 2.21 introduced new vibration method. */ | |
| ds->use_vibration_v2 = ds->update_version >= DS_FEATURE_VERSION(2, 21); | |
| } else if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER_2) { | |
| ds->use_vibration_v2 = true; | |
| ds->is_edge = true; | |
| } | |
| ret = ps_devices_list_add(ps_dev); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| ret = dualsense_get_calibration_data(ds); | |
| if (ret) { | |
| hid_err(hdev, "Failed to get calibration data from DualSense\n"); | |
| goto err; | |
| } | |
| ds->gamepad = ps_gamepad_create(hdev, dualsense_play_effect); | |
| if (IS_ERR(ds->gamepad)) { | |
| ret = PTR_ERR(ds->gamepad); | |
| goto err; | |
| } | |
| /* Register DualSense Edge back paddle and Fn buttons. */ | |
| if (ds->is_edge) { | |
| input_set_capability(ds->gamepad, EV_KEY, BTN_TRIGGER_HAPPY1); | |
| input_set_capability(ds->gamepad, EV_KEY, BTN_TRIGGER_HAPPY2); | |
| input_set_capability(ds->gamepad, EV_KEY, BTN_TRIGGER_HAPPY3); | |
| input_set_capability(ds->gamepad, EV_KEY, BTN_TRIGGER_HAPPY4); | |
| } | |
| /* Use gamepad input device name as primary device name for e.g. LEDs */ | |
| ps_dev->input_dev_name = dev_name(&ds->gamepad->dev); | |
| ds->sensors = ps_sensors_create(hdev, DS_ACC_RANGE, DS_ACC_RES_PER_G, | |
| DS_GYRO_RANGE, DS_GYRO_RES_PER_DEG_S); | |
| if (IS_ERR(ds->sensors)) { | |
| ret = PTR_ERR(ds->sensors); | |
| goto err; | |
| } | |
| ds->touchpad = ps_touchpad_create(hdev, DS_TOUCHPAD_WIDTH, DS_TOUCHPAD_HEIGHT, 2); | |
| if (IS_ERR(ds->touchpad)) { | |
| ret = PTR_ERR(ds->touchpad); | |
| goto err; | |
| } | |
| /* Bluetooth audio is currently not supported. */ | |
| if (hdev->bus == BUS_USB) { | |
| ds->jack = ps_headset_jack_create(hdev); | |
| if (IS_ERR(ds->jack)) { | |
| ret = PTR_ERR(ds->jack); | |
| goto err; | |
| } | |
| } | |
| ret = ps_device_register_battery(ps_dev); | |
| if (ret) | |
| goto err; | |
| /* | |
| * The hardware may have control over the LEDs (e.g. in Bluetooth on startup). | |
| * Reset the LEDs (lightbar, mute, player leds), so we can control them | |
| * from software. | |
| */ | |
| ret = dualsense_reset_leds(ds); | |
| if (ret) | |
| goto err; | |
| ret = ps_lightbar_register(ps_dev, &ds->lightbar, dualsense_lightbar_set_brightness); | |
| if (ret) | |
| goto err; | |
| /* Set default lightbar color. */ | |
| dualsense_set_lightbar(ds, 0, 0, 128); /* blue */ | |
| for (i = 0; i < ARRAY_SIZE(player_leds_info); i++) { | |
| const struct ps_led_info *led_info = &player_leds_info[i]; | |
| ret = ps_led_register(ps_dev, &ds->player_leds[i], led_info); | |
| if (ret < 0) | |
| goto err; | |
| } | |
| ret = ps_device_set_player_id(ps_dev); | |
| if (ret) { | |
| hid_err(hdev, "Failed to assign player id for DualSense: %d\n", ret); | |
| goto err; | |
| } | |
| /* Set player LEDs to our player id. */ | |
| dualsense_set_player_leds(ds); | |
| /* | |
| * Reporting hardware and firmware is important as there are frequent updates, which | |
| * can change behavior. | |
| */ | |
| hid_info(hdev, "Registered DualSense controller hw_version=0x%08x fw_version=0x%08x\n", | |
| ds->base.hw_version, ds->base.fw_version); | |
| return &ds->base; | |
| err: | |
| ps_devices_list_remove(ps_dev); | |
| return ERR_PTR(ret); | |
| } | |
| static void dualshock4_dongle_calibration_work(struct work_struct *work) | |
| { | |
| struct dualshock4 *ds4 = container_of(work, struct dualshock4, dongle_hotplug_worker); | |
| enum dualshock4_dongle_state dongle_state; | |
| int ret; | |
| ret = dualshock4_get_calibration_data(ds4); | |
| if (ret < 0) { | |
| /* This call is very unlikely to fail for the dongle. When it | |
| * fails we are probably in a very bad state, so mark the | |
| * dongle as disabled. We will re-enable the dongle if a new | |
| * DS4 hotplug is detect from sony_raw_event as any issues | |
| * are likely resolved then (the dongle is quite stupid). | |
| */ | |
| hid_err(ds4->base.hdev, | |
| "DualShock 4 USB dongle: calibration failed, disabling device\n"); | |
| dongle_state = DONGLE_DISABLED; | |
| } else { | |
| hid_info(ds4->base.hdev, "DualShock 4 USB dongle: calibration completed\n"); | |
| dongle_state = DONGLE_CONNECTED; | |
| } | |
| scoped_guard(spinlock_irqsave, &ds4->base.lock) | |
| ds4->dongle_state = dongle_state; | |
| } | |
| static int dualshock4_get_calibration_data(struct dualshock4 *ds4) | |
| { | |
| struct hid_device *hdev = ds4->base.hdev; | |
| short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus; | |
| short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus; | |
| short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus; | |
| short gyro_speed_plus, gyro_speed_minus; | |
| short acc_x_plus, acc_x_minus; | |
| short acc_y_plus, acc_y_minus; | |
| short acc_z_plus, acc_z_minus; | |
| int speed_2x; | |
| int range_2g; | |
| int ret = 0; | |
| int i; | |
| u8 *buf; | |
| if (ds4->base.hdev->bus == BUS_USB) { | |
| int retries; | |
| buf = kzalloc(DS4_FEATURE_REPORT_CALIBRATION_SIZE, GFP_KERNEL); | |
| if (!buf) { | |
| ret = -ENOMEM; | |
| goto transfer_failed; | |
| } | |
| /* We should normally receive the feature report data we asked | |
| * for, but hidraw applications such as Steam can issue feature | |
| * reports as well. In particular for Dongle reconnects, Steam | |
| * and this function are competing resulting in often receiving | |
| * data for a different HID report, so retry a few times. | |
| */ | |
| for (retries = 0; retries < 3; retries++) { | |
| ret = ps_get_report(hdev, DS4_FEATURE_REPORT_CALIBRATION, buf, | |
| DS4_FEATURE_REPORT_CALIBRATION_SIZE, true); | |
| if (ret) { | |
| if (retries < 2) { | |
| hid_warn(hdev, | |
| "Retrying DualShock 4 get calibration report (0x02) request\n"); | |
| continue; | |
| } | |
| hid_warn(hdev, | |
| "Failed to retrieve DualShock4 calibration info: %d\n", | |
| ret); | |
| ret = -EILSEQ; | |
| kfree(buf); | |
| goto transfer_failed; | |
| } else { | |
| break; | |
| } | |
| } | |
| } else { /* Bluetooth */ | |
| buf = kzalloc(DS4_FEATURE_REPORT_CALIBRATION_BT_SIZE, GFP_KERNEL); | |
| if (!buf) { | |
| ret = -ENOMEM; | |
| goto transfer_failed; | |
| } | |
| ret = ps_get_report(hdev, DS4_FEATURE_REPORT_CALIBRATION_BT, buf, | |
| DS4_FEATURE_REPORT_CALIBRATION_BT_SIZE, true); | |
| if (ret) { | |
| hid_warn(hdev, "Failed to retrieve DualShock4 calibration info: %d\n", ret); | |
| kfree(buf); | |
| goto transfer_failed; | |
| } | |
| } | |
| /* Transfer succeeded - parse the calibration data received. */ | |
| gyro_pitch_bias = get_unaligned_le16(&buf[1]); | |
| gyro_yaw_bias = get_unaligned_le16(&buf[3]); | |
| gyro_roll_bias = get_unaligned_le16(&buf[5]); | |
| if (ds4->base.hdev->bus == BUS_USB) { | |
| gyro_pitch_plus = get_unaligned_le16(&buf[7]); | |
| gyro_pitch_minus = get_unaligned_le16(&buf[9]); | |
| gyro_yaw_plus = get_unaligned_le16(&buf[11]); | |
| gyro_yaw_minus = get_unaligned_le16(&buf[13]); | |
| gyro_roll_plus = get_unaligned_le16(&buf[15]); | |
| gyro_roll_minus = get_unaligned_le16(&buf[17]); | |
| } else { | |
| /* BT + Dongle */ | |
| gyro_pitch_plus = get_unaligned_le16(&buf[7]); | |
| gyro_yaw_plus = get_unaligned_le16(&buf[9]); | |
| gyro_roll_plus = get_unaligned_le16(&buf[11]); | |
| gyro_pitch_minus = get_unaligned_le16(&buf[13]); | |
| gyro_yaw_minus = get_unaligned_le16(&buf[15]); | |
| gyro_roll_minus = get_unaligned_le16(&buf[17]); | |
| } | |
| gyro_speed_plus = get_unaligned_le16(&buf[19]); | |
| gyro_speed_minus = get_unaligned_le16(&buf[21]); | |
| acc_x_plus = get_unaligned_le16(&buf[23]); | |
| acc_x_minus = get_unaligned_le16(&buf[25]); | |
| acc_y_plus = get_unaligned_le16(&buf[27]); | |
| acc_y_minus = get_unaligned_le16(&buf[29]); | |
| acc_z_plus = get_unaligned_le16(&buf[31]); | |
| acc_z_minus = get_unaligned_le16(&buf[33]); | |
| /* Done parsing the buffer, so let's free it. */ | |
| kfree(buf); | |
| /* | |
| * Set gyroscope calibration and normalization parameters. | |
| * Data values will be normalized to 1/DS4_GYRO_RES_PER_DEG_S degree/s. | |
| */ | |
| speed_2x = (gyro_speed_plus + gyro_speed_minus); | |
| ds4->gyro_calib_data[0].abs_code = ABS_RX; | |
| ds4->gyro_calib_data[0].bias = 0; | |
| ds4->gyro_calib_data[0].sens_numer = speed_2x * DS4_GYRO_RES_PER_DEG_S; | |
| ds4->gyro_calib_data[0].sens_denom = abs(gyro_pitch_plus - gyro_pitch_bias) + | |
| abs(gyro_pitch_minus - gyro_pitch_bias); | |
| ds4->gyro_calib_data[1].abs_code = ABS_RY; | |
| ds4->gyro_calib_data[1].bias = 0; | |
| ds4->gyro_calib_data[1].sens_numer = speed_2x * DS4_GYRO_RES_PER_DEG_S; | |
| ds4->gyro_calib_data[1].sens_denom = abs(gyro_yaw_plus - gyro_yaw_bias) + | |
| abs(gyro_yaw_minus - gyro_yaw_bias); | |
| ds4->gyro_calib_data[2].abs_code = ABS_RZ; | |
| ds4->gyro_calib_data[2].bias = 0; | |
| ds4->gyro_calib_data[2].sens_numer = speed_2x * DS4_GYRO_RES_PER_DEG_S; | |
| ds4->gyro_calib_data[2].sens_denom = abs(gyro_roll_plus - gyro_roll_bias) + | |
| abs(gyro_roll_minus - gyro_roll_bias); | |
| /* | |
| * Set accelerometer calibration and normalization parameters. | |
| * Data values will be normalized to 1/DS4_ACC_RES_PER_G g. | |
| */ | |
| range_2g = acc_x_plus - acc_x_minus; | |
| ds4->accel_calib_data[0].abs_code = ABS_X; | |
| ds4->accel_calib_data[0].bias = acc_x_plus - range_2g / 2; | |
| ds4->accel_calib_data[0].sens_numer = 2 * DS4_ACC_RES_PER_G; | |
| ds4->accel_calib_data[0].sens_denom = range_2g; | |
| range_2g = acc_y_plus - acc_y_minus; | |
| ds4->accel_calib_data[1].abs_code = ABS_Y; | |
| ds4->accel_calib_data[1].bias = acc_y_plus - range_2g / 2; | |
| ds4->accel_calib_data[1].sens_numer = 2 * DS4_ACC_RES_PER_G; | |
| ds4->accel_calib_data[1].sens_denom = range_2g; | |
| range_2g = acc_z_plus - acc_z_minus; | |
| ds4->accel_calib_data[2].abs_code = ABS_Z; | |
| ds4->accel_calib_data[2].bias = acc_z_plus - range_2g / 2; | |
| ds4->accel_calib_data[2].sens_numer = 2 * DS4_ACC_RES_PER_G; | |
| ds4->accel_calib_data[2].sens_denom = range_2g; | |
| transfer_failed: | |
| /* | |
| * Sanity check gyro calibration data. This is needed to prevent crashes | |
| * during report handling of virtual, clone or broken devices not implementing | |
| * calibration data properly. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(ds4->gyro_calib_data); i++) { | |
| if (ds4->gyro_calib_data[i].sens_denom == 0) { | |
| ds4->gyro_calib_data[i].abs_code = ABS_RX + i; | |
| hid_warn(hdev, | |
| "Invalid gyro calibration data for axis (%d), disabling calibration.", | |
| ds4->gyro_calib_data[i].abs_code); | |
| ds4->gyro_calib_data[i].bias = 0; | |
| ds4->gyro_calib_data[i].sens_numer = DS4_GYRO_RANGE; | |
| ds4->gyro_calib_data[i].sens_denom = S16_MAX; | |
| } | |
| } | |
| /* | |
| * Sanity check accelerometer calibration data. This is needed to prevent crashes | |
| * during report handling of virtual, clone or broken devices not implementing calibration | |
| * data properly. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(ds4->accel_calib_data); i++) { | |
| if (ds4->accel_calib_data[i].sens_denom == 0) { | |
| ds4->accel_calib_data[i].abs_code = ABS_X + i; | |
| hid_warn(hdev, | |
| "Invalid accelerometer calibration data for axis (%d), disabling calibration.", | |
| ds4->accel_calib_data[i].abs_code); | |
| ds4->accel_calib_data[i].bias = 0; | |
| ds4->accel_calib_data[i].sens_numer = DS4_ACC_RANGE; | |
| ds4->accel_calib_data[i].sens_denom = S16_MAX; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int dualshock4_get_firmware_info(struct dualshock4 *ds4) | |
| { | |
| u8 *buf; | |
| int ret; | |
| buf = kzalloc(DS4_FEATURE_REPORT_FIRMWARE_INFO_SIZE, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| /* Note USB and BT support the same feature report, but this report | |
| * lacks CRC support, so must be disabled in ps_get_report. | |
| */ | |
| ret = ps_get_report(ds4->base.hdev, DS4_FEATURE_REPORT_FIRMWARE_INFO, buf, | |
| DS4_FEATURE_REPORT_FIRMWARE_INFO_SIZE, false); | |
| if (ret) { | |
| hid_err(ds4->base.hdev, "Failed to retrieve DualShock4 firmware info: %d\n", ret); | |
| goto err_free; | |
| } | |
| ds4->base.hw_version = get_unaligned_le16(&buf[35]); | |
| ds4->base.fw_version = get_unaligned_le16(&buf[41]); | |
| err_free: | |
| kfree(buf); | |
| return ret; | |
| } | |
| static int dualshock4_get_mac_address(struct dualshock4 *ds4) | |
| { | |
| struct hid_device *hdev = ds4->base.hdev; | |
| u8 *buf; | |
| int ret = 0; | |
| if (hdev->bus == BUS_USB) { | |
| buf = kzalloc(DS4_FEATURE_REPORT_PAIRING_INFO_SIZE, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| ret = ps_get_report(hdev, DS4_FEATURE_REPORT_PAIRING_INFO, buf, | |
| DS4_FEATURE_REPORT_PAIRING_INFO_SIZE, false); | |
| if (ret) { | |
| hid_err(hdev, "Failed to retrieve DualShock4 pairing info: %d\n", ret); | |
| goto err_free; | |
| } | |
| memcpy(ds4->base.mac_address, &buf[1], sizeof(ds4->base.mac_address)); | |
| } else { | |
| /* Rely on HIDP for Bluetooth */ | |
| if (strlen(hdev->uniq) != 17) | |
| return -EINVAL; | |
| ret = sscanf(hdev->uniq, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", | |
| &ds4->base.mac_address[5], &ds4->base.mac_address[4], | |
| &ds4->base.mac_address[3], &ds4->base.mac_address[2], | |
| &ds4->base.mac_address[1], &ds4->base.mac_address[0]); | |
| if (ret != sizeof(ds4->base.mac_address)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| err_free: | |
| kfree(buf); | |
| return ret; | |
| } | |
| static enum led_brightness dualshock4_led_get_brightness(struct led_classdev *led) | |
| { | |
| struct hid_device *hdev = to_hid_device(led->dev->parent); | |
| struct dualshock4 *ds4 = hid_get_drvdata(hdev); | |
| unsigned int led_index; | |
| led_index = led - ds4->lightbar_leds; | |
| switch (led_index) { | |
| case 0: | |
| return ds4->lightbar_red; | |
| case 1: | |
| return ds4->lightbar_green; | |
| case 2: | |
| return ds4->lightbar_blue; | |
| case 3: | |
| return ds4->lightbar_enabled; | |
| } | |
| return -1; | |
| } | |
| static int dualshock4_led_set_blink(struct led_classdev *led, unsigned long *delay_on, | |
| unsigned long *delay_off) | |
| { | |
| struct hid_device *hdev = to_hid_device(led->dev->parent); | |
| struct dualshock4 *ds4 = hid_get_drvdata(hdev); | |
| scoped_guard(spinlock_irqsave, &ds4->base.lock) { | |
| if (!*delay_on && !*delay_off) { | |
| /* Default to 1 Hz (50 centiseconds on, 50 centiseconds off). */ | |
| ds4->lightbar_blink_on = 50; | |
| ds4->lightbar_blink_off = 50; | |
| } else { | |
| /* Blink delays in centiseconds. */ | |
| ds4->lightbar_blink_on = min_t(unsigned long, *delay_on / 10, | |
| DS4_LIGHTBAR_MAX_BLINK); | |
| ds4->lightbar_blink_off = min_t(unsigned long, *delay_off / 10, | |
| DS4_LIGHTBAR_MAX_BLINK); | |
| } | |
| ds4->update_lightbar_blink = true; | |
| } | |
| dualshock4_schedule_work(ds4); | |
| /* Report scaled values back to LED subsystem */ | |
| *delay_on = ds4->lightbar_blink_on * 10; | |
| *delay_off = ds4->lightbar_blink_off * 10; | |
| return 0; | |
| } | |
| static int dualshock4_led_set_brightness(struct led_classdev *led, enum led_brightness value) | |
| { | |
| struct hid_device *hdev = to_hid_device(led->dev->parent); | |
| struct dualshock4 *ds4 = hid_get_drvdata(hdev); | |
| unsigned int led_index; | |
| scoped_guard(spinlock_irqsave, &ds4->base.lock) { | |
| led_index = led - ds4->lightbar_leds; | |
| switch (led_index) { | |
| case 0: | |
| ds4->lightbar_red = value; | |
| break; | |
| case 1: | |
| ds4->lightbar_green = value; | |
| break; | |
| case 2: | |
| ds4->lightbar_blue = value; | |
| break; | |
| case 3: | |
| ds4->lightbar_enabled = !!value; | |
| /* brightness = 0 also cancels blinking in Linux. */ | |
| if (!ds4->lightbar_enabled) { | |
| ds4->lightbar_blink_off = 0; | |
| ds4->lightbar_blink_on = 0; | |
| ds4->update_lightbar_blink = true; | |
| } | |
| } | |
| ds4->update_lightbar = true; | |
| } | |
| dualshock4_schedule_work(ds4); | |
| return 0; | |
| } | |
| static void dualshock4_init_output_report(struct dualshock4 *ds4, | |
| struct dualshock4_output_report *rp, void *buf) | |
| { | |
| struct hid_device *hdev = ds4->base.hdev; | |
| if (hdev->bus == BUS_BLUETOOTH) { | |
| struct dualshock4_output_report_bt *bt = buf; | |
| memset(bt, 0, sizeof(*bt)); | |
| bt->report_id = DS4_OUTPUT_REPORT_BT; | |
| rp->data = buf; | |
| rp->len = sizeof(*bt); | |
| rp->bt = bt; | |
| rp->usb = NULL; | |
| rp->common = &bt->common; | |
| } else { /* USB */ | |
| struct dualshock4_output_report_usb *usb = buf; | |
| memset(usb, 0, sizeof(*usb)); | |
| usb->report_id = DS4_OUTPUT_REPORT_USB; | |
| rp->data = buf; | |
| rp->len = sizeof(*usb); | |
| rp->bt = NULL; | |
| rp->usb = usb; | |
| rp->common = &usb->common; | |
| } | |
| } | |
| static void dualshock4_output_worker(struct work_struct *work) | |
| { | |
| struct dualshock4 *ds4 = container_of(work, struct dualshock4, output_worker); | |
| struct dualshock4_output_report report; | |
| struct dualshock4_output_report_common *common; | |
| dualshock4_init_output_report(ds4, &report, ds4->output_report_dmabuf); | |
| common = report.common; | |
| scoped_guard(spinlock_irqsave, &ds4->base.lock) { | |
| /* | |
| * Some 3rd party gamepads expect updates to rumble and lightbar | |
| * together, and setting one may cancel the other. | |
| * | |
| * Let's maximise compatibility by always sending rumble and lightbar | |
| * updates together, even when only one has been scheduled, resulting | |
| * in: | |
| * | |
| * ds4->valid_flag0 >= 0x03 | |
| * | |
| * Hopefully this will maximise compatibility with third-party pads. | |
| * | |
| * Any further update bits, such as 0x04 for lightbar blinking, will | |
| * be or'd on top of this like before. | |
| */ | |
| if (ds4->update_rumble || ds4->update_lightbar) { | |
| ds4->update_rumble = true; /* 0x01 */ | |
| ds4->update_lightbar = true; /* 0x02 */ | |
| } | |
| if (ds4->update_rumble) { | |
| /* Select classic rumble style haptics and enable it. */ | |
| common->valid_flag0 |= DS4_OUTPUT_VALID_FLAG0_MOTOR; | |
| common->motor_left = ds4->motor_left; | |
| common->motor_right = ds4->motor_right; | |
| ds4->update_rumble = false; | |
| } | |
| if (ds4->update_lightbar) { | |
| common->valid_flag0 |= DS4_OUTPUT_VALID_FLAG0_LED; | |
| /* Compatible behavior with hid-sony, which used a dummy global LED to | |
| * allow enabling/disabling the lightbar. The global LED maps to | |
| * lightbar_enabled. | |
| */ | |
| common->lightbar_red = ds4->lightbar_enabled ? ds4->lightbar_red : 0; | |
| common->lightbar_green = ds4->lightbar_enabled ? ds4->lightbar_green : 0; | |
| common->lightbar_blue = ds4->lightbar_enabled ? ds4->lightbar_blue : 0; | |
| ds4->update_lightbar = false; | |
| } | |
| if (ds4->update_lightbar_blink) { | |
| common->valid_flag0 |= DS4_OUTPUT_VALID_FLAG0_LED_BLINK; | |
| common->lightbar_blink_on = ds4->lightbar_blink_on; | |
| common->lightbar_blink_off = ds4->lightbar_blink_off; | |
| ds4->update_lightbar_blink = false; | |
| } | |
| } | |
| /* Bluetooth packets need additional flags as well as a CRC in the last 4 bytes. */ | |
| if (report.bt) { | |
| u32 crc; | |
| u8 seed = PS_OUTPUT_CRC32_SEED; | |
| /* Hardware control flags need to set to let the device know | |
| * there is HID data as well as CRC. | |
| */ | |
| report.bt->hw_control = DS4_OUTPUT_HWCTL_HID | DS4_OUTPUT_HWCTL_CRC32; | |
| if (ds4->update_bt_poll_interval) { | |
| report.bt->hw_control |= ds4->bt_poll_interval; | |
| ds4->update_bt_poll_interval = false; | |
| } | |
| crc = crc32_le(0xFFFFFFFF, &seed, 1); | |
| crc = ~crc32_le(crc, report.data, report.len - 4); | |
| report.bt->crc32 = cpu_to_le32(crc); | |
| } | |
| hid_hw_output_report(ds4->base.hdev, report.data, report.len); | |
| } | |
| static int dualshock4_parse_report(struct ps_device *ps_dev, struct hid_report *report, | |
| u8 *data, int size) | |
| { | |
| struct hid_device *hdev = ps_dev->hdev; | |
| struct dualshock4 *ds4 = container_of(ps_dev, struct dualshock4, base); | |
| struct dualshock4_input_report_common *ds4_report; | |
| struct dualshock4_touch_report *touch_reports; | |
| u8 battery_capacity, num_touch_reports, value; | |
| int battery_status, i, j; | |
| u16 sensor_timestamp; | |
| bool is_minimal = false; | |
| /* | |
| * DualShock4 in USB uses the full HID report for reportID 1, but | |
| * Bluetooth uses a minimal HID report for reportID 1 and reports | |
| * the full report using reportID 17. | |
| */ | |
| if (hdev->bus == BUS_USB && report->id == DS4_INPUT_REPORT_USB && | |
| size == DS4_INPUT_REPORT_USB_SIZE) { | |
| struct dualshock4_input_report_usb *usb = | |
| (struct dualshock4_input_report_usb *)data; | |
| if (usb->num_touch_reports > ARRAY_SIZE(usb->touch_reports)) { | |
| hid_err(hdev, "DualShock4 USB input report has invalid num_touch_reports=%d\n", | |
| usb->num_touch_reports); | |
| return -EINVAL; | |
| } | |
| ds4_report = &usb->common; | |
| num_touch_reports = min_t(u8, usb->num_touch_reports, | |
| ARRAY_SIZE(usb->touch_reports)); | |
| touch_reports = usb->touch_reports; | |
| } else if (hdev->bus == BUS_BLUETOOTH && report->id == DS4_INPUT_REPORT_BT && | |
| size == DS4_INPUT_REPORT_BT_SIZE) { | |
| struct dualshock4_input_report_bt *bt = (struct dualshock4_input_report_bt *)data; | |
| u32 report_crc = get_unaligned_le32(&bt->crc32); | |
| /* Last 4 bytes of input report contains CRC. */ | |
| if (!ps_check_crc32(PS_INPUT_CRC32_SEED, data, size - 4, report_crc)) { | |
| hid_err(hdev, "DualShock4 input CRC's check failed\n"); | |
| return -EILSEQ; | |
| } | |
| if (bt->num_touch_reports > ARRAY_SIZE(bt->touch_reports)) { | |
| hid_err(hdev, "DualShock4 BT input report has invalid num_touch_reports=%d\n", | |
| bt->num_touch_reports); | |
| return -EINVAL; | |
| } | |
| ds4_report = &bt->common; | |
| num_touch_reports = min_t(u8, bt->num_touch_reports, | |
| ARRAY_SIZE(bt->touch_reports)); | |
| touch_reports = bt->touch_reports; | |
| } else if (hdev->bus == BUS_BLUETOOTH && | |
| report->id == DS4_INPUT_REPORT_BT_MINIMAL && | |
| size == DS4_INPUT_REPORT_BT_MINIMAL_SIZE) { | |
| /* Some third-party pads never switch to the full 0x11 report. | |
| * The short 0x01 report is 10 bytes long: | |
| * u8 report_id == 0x01 | |
| * u8 first_bytes_of_full_report[9] | |
| * So let's reuse the full report parser, and stop it after | |
| * parsing the buttons. | |
| */ | |
| ds4_report = (struct dualshock4_input_report_common *)&data[1]; | |
| is_minimal = true; | |
| } else { | |
| hid_err(hdev, "Unhandled reportID=%d\n", report->id); | |
| return -1; | |
| } | |
| input_report_abs(ds4->gamepad, ABS_X, ds4_report->x); | |
| input_report_abs(ds4->gamepad, ABS_Y, ds4_report->y); | |
| input_report_abs(ds4->gamepad, ABS_RX, ds4_report->rx); | |
| input_report_abs(ds4->gamepad, ABS_RY, ds4_report->ry); | |
| input_report_abs(ds4->gamepad, ABS_Z, ds4_report->z); | |
| input_report_abs(ds4->gamepad, ABS_RZ, ds4_report->rz); | |
| value = ds4_report->buttons[0] & DS_BUTTONS0_HAT_SWITCH; | |
| if (value >= ARRAY_SIZE(ps_gamepad_hat_mapping)) | |
| value = 8; /* center */ | |
| input_report_abs(ds4->gamepad, ABS_HAT0X, ps_gamepad_hat_mapping[value].x); | |
| input_report_abs(ds4->gamepad, ABS_HAT0Y, ps_gamepad_hat_mapping[value].y); | |
| input_report_key(ds4->gamepad, BTN_WEST, ds4_report->buttons[0] & DS_BUTTONS0_SQUARE); | |
| input_report_key(ds4->gamepad, BTN_SOUTH, ds4_report->buttons[0] & DS_BUTTONS0_CROSS); | |
| input_report_key(ds4->gamepad, BTN_EAST, ds4_report->buttons[0] & DS_BUTTONS0_CIRCLE); | |
| input_report_key(ds4->gamepad, BTN_NORTH, ds4_report->buttons[0] & DS_BUTTONS0_TRIANGLE); | |
| input_report_key(ds4->gamepad, BTN_TL, ds4_report->buttons[1] & DS_BUTTONS1_L1); | |
| input_report_key(ds4->gamepad, BTN_TR, ds4_report->buttons[1] & DS_BUTTONS1_R1); | |
| input_report_key(ds4->gamepad, BTN_TL2, ds4_report->buttons[1] & DS_BUTTONS1_L2); | |
| input_report_key(ds4->gamepad, BTN_TR2, ds4_report->buttons[1] & DS_BUTTONS1_R2); | |
| input_report_key(ds4->gamepad, BTN_SELECT, ds4_report->buttons[1] & DS_BUTTONS1_CREATE); | |
| input_report_key(ds4->gamepad, BTN_START, ds4_report->buttons[1] & DS_BUTTONS1_OPTIONS); | |
| input_report_key(ds4->gamepad, BTN_THUMBL, ds4_report->buttons[1] & DS_BUTTONS1_L3); | |
| input_report_key(ds4->gamepad, BTN_THUMBR, ds4_report->buttons[1] & DS_BUTTONS1_R3); | |
| input_report_key(ds4->gamepad, BTN_MODE, ds4_report->buttons[2] & DS_BUTTONS2_PS_HOME); | |
| input_sync(ds4->gamepad); | |
| if (is_minimal) | |
| return 0; | |
| /* Parse and calibrate gyroscope data. */ | |
| for (i = 0; i < ARRAY_SIZE(ds4_report->gyro); i++) { | |
| int raw_data = (short)le16_to_cpu(ds4_report->gyro[i]); | |
| int calib_data = mult_frac(ds4->gyro_calib_data[i].sens_numer, | |
| raw_data, ds4->gyro_calib_data[i].sens_denom); | |
| input_report_abs(ds4->sensors, ds4->gyro_calib_data[i].abs_code, calib_data); | |
| } | |
| /* Parse and calibrate accelerometer data. */ | |
| for (i = 0; i < ARRAY_SIZE(ds4_report->accel); i++) { | |
| int raw_data = (short)le16_to_cpu(ds4_report->accel[i]); | |
| int calib_data = mult_frac(ds4->accel_calib_data[i].sens_numer, | |
| raw_data - ds4->accel_calib_data[i].bias, | |
| ds4->accel_calib_data[i].sens_denom); | |
| input_report_abs(ds4->sensors, ds4->accel_calib_data[i].abs_code, calib_data); | |
| } | |
| /* Convert timestamp (in 5.33us unit) to timestamp_us */ | |
| sensor_timestamp = le16_to_cpu(ds4_report->sensor_timestamp); | |
| if (!ds4->sensor_timestamp_initialized) { | |
| ds4->sensor_timestamp_us = DIV_ROUND_CLOSEST(sensor_timestamp * 16, 3); | |
| ds4->sensor_timestamp_initialized = true; | |
| } else { | |
| u16 delta; | |
| if (ds4->prev_sensor_timestamp > sensor_timestamp) | |
| delta = (U16_MAX - ds4->prev_sensor_timestamp + sensor_timestamp + 1); | |
| else | |
| delta = sensor_timestamp - ds4->prev_sensor_timestamp; | |
| ds4->sensor_timestamp_us += DIV_ROUND_CLOSEST(delta * 16, 3); | |
| } | |
| ds4->prev_sensor_timestamp = sensor_timestamp; | |
| input_event(ds4->sensors, EV_MSC, MSC_TIMESTAMP, ds4->sensor_timestamp_us); | |
| input_sync(ds4->sensors); | |
| for (i = 0; i < num_touch_reports; i++) { | |
| struct dualshock4_touch_report *touch_report = &touch_reports[i]; | |
| for (j = 0; j < ARRAY_SIZE(touch_report->points); j++) { | |
| struct dualshock4_touch_point *point = &touch_report->points[j]; | |
| bool active = (point->contact & DS4_TOUCH_POINT_INACTIVE) ? false : true; | |
| input_mt_slot(ds4->touchpad, j); | |
| input_mt_report_slot_state(ds4->touchpad, MT_TOOL_FINGER, active); | |
| if (active) { | |
| input_report_abs(ds4->touchpad, ABS_MT_POSITION_X, | |
| DS4_TOUCH_POINT_X(point->x_hi, point->x_lo)); | |
| input_report_abs(ds4->touchpad, ABS_MT_POSITION_Y, | |
| DS4_TOUCH_POINT_Y(point->y_hi, point->y_lo)); | |
| } | |
| } | |
| input_mt_sync_frame(ds4->touchpad); | |
| input_sync(ds4->touchpad); | |
| } | |
| input_report_key(ds4->touchpad, BTN_LEFT, ds4_report->buttons[2] & DS_BUTTONS2_TOUCHPAD); | |
| /* | |
| * Interpretation of the battery_capacity data depends on the cable state. | |
| * When no cable is connected (bit4 is 0): | |
| * - 0:10: percentage in units of 10%. | |
| * When a cable is plugged in: | |
| * - 0-10: percentage in units of 10%. | |
| * - 11: battery is full | |
| * - 14: not charging due to Voltage or temperature error | |
| * - 15: charge error | |
| */ | |
| if (ds4_report->status[0] & DS4_STATUS0_CABLE_STATE) { | |
| u8 battery_data = ds4_report->status[0] & DS4_STATUS0_BATTERY_CAPACITY; | |
| if (battery_data < 10) { | |
| /* Take the mid-point for each battery capacity value, | |
| * because on the hardware side 0 = 0-9%, 1=10-19%, etc. | |
| * This matches official platform behavior, which does | |
| * the same. | |
| */ | |
| battery_capacity = battery_data * 10 + 5; | |
| battery_status = POWER_SUPPLY_STATUS_CHARGING; | |
| } else if (battery_data == 10) { | |
| battery_capacity = 100; | |
| battery_status = POWER_SUPPLY_STATUS_CHARGING; | |
| } else if (battery_data == DS4_BATTERY_STATUS_FULL) { | |
| battery_capacity = 100; | |
| battery_status = POWER_SUPPLY_STATUS_FULL; | |
| } else { /* 14, 15 and undefined values */ | |
| battery_capacity = 0; | |
| battery_status = POWER_SUPPLY_STATUS_UNKNOWN; | |
| } | |
| } else { | |
| u8 battery_data = ds4_report->status[0] & DS4_STATUS0_BATTERY_CAPACITY; | |
| if (battery_data < 10) | |
| battery_capacity = battery_data * 10 + 5; | |
| else /* 10 */ | |
| battery_capacity = 100; | |
| battery_status = POWER_SUPPLY_STATUS_DISCHARGING; | |
| } | |
| scoped_guard(spinlock_irqsave, &ps_dev->lock) { | |
| ps_dev->battery_capacity = battery_capacity; | |
| ps_dev->battery_status = battery_status; | |
| } | |
| return 0; | |
| } | |
| static int dualshock4_dongle_parse_report(struct ps_device *ps_dev, struct hid_report *report, | |
| u8 *data, int size) | |
| { | |
| struct dualshock4 *ds4 = container_of(ps_dev, struct dualshock4, base); | |
| bool connected = false; | |
| /* The dongle reports data using the main USB report (0x1) no matter whether a controller | |
| * is connected with mostly zeros. The report does contain dongle status, which we use to | |
| * determine if a controller is connected and if so we forward to the regular DualShock4 | |
| * parsing code. | |
| */ | |
| if (data[0] == DS4_INPUT_REPORT_USB && size == DS4_INPUT_REPORT_USB_SIZE) { | |
| struct dualshock4_input_report_common *ds4_report = | |
| (struct dualshock4_input_report_common *)&data[1]; | |
| connected = ds4_report->status[1] & DS4_STATUS1_DONGLE_STATE ? false : true; | |
| if (ds4->dongle_state == DONGLE_DISCONNECTED && connected) { | |
| hid_info(ps_dev->hdev, "DualShock 4 USB dongle: controller connected\n"); | |
| dualshock4_set_default_lightbar_colors(ds4); | |
| scoped_guard(spinlock_irqsave, &ps_dev->lock) | |
| ds4->dongle_state = DONGLE_CALIBRATING; | |
| schedule_work(&ds4->dongle_hotplug_worker); | |
| /* Don't process the report since we don't have | |
| * calibration data, but let hidraw have it anyway. | |
| */ | |
| return 0; | |
| } else if ((ds4->dongle_state == DONGLE_CONNECTED || | |
| ds4->dongle_state == DONGLE_DISABLED) && !connected) { | |
| hid_info(ps_dev->hdev, "DualShock 4 USB dongle: controller disconnected\n"); | |
| scoped_guard(spinlock_irqsave, &ps_dev->lock) | |
| ds4->dongle_state = DONGLE_DISCONNECTED; | |
| /* Return 0, so hidraw can get the report. */ | |
| return 0; | |
| } else if (ds4->dongle_state == DONGLE_CALIBRATING || | |
| ds4->dongle_state == DONGLE_DISABLED || | |
| ds4->dongle_state == DONGLE_DISCONNECTED) { | |
| /* Return 0, so hidraw can get the report. */ | |
| return 0; | |
| } | |
| } | |
| if (connected) | |
| return dualshock4_parse_report(ps_dev, report, data, size); | |
| return 0; | |
| } | |
| static int dualshock4_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) | |
| { | |
| struct hid_device *hdev = input_get_drvdata(dev); | |
| struct dualshock4 *ds4 = hid_get_drvdata(hdev); | |
| if (effect->type != FF_RUMBLE) | |
| return 0; | |
| scoped_guard(spinlock_irqsave, &ds4->base.lock) { | |
| ds4->update_rumble = true; | |
| ds4->motor_left = effect->u.rumble.strong_magnitude / 256; | |
| ds4->motor_right = effect->u.rumble.weak_magnitude / 256; | |
| } | |
| dualshock4_schedule_work(ds4); | |
| return 0; | |
| } | |
| static void dualshock4_remove(struct ps_device *ps_dev) | |
| { | |
| struct dualshock4 *ds4 = container_of(ps_dev, struct dualshock4, base); | |
| scoped_guard(spinlock_irqsave, &ds4->base.lock) | |
| ds4->output_worker_initialized = false; | |
| cancel_work_sync(&ds4->output_worker); | |
| if (ps_dev->hdev->product == USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE) | |
| cancel_work_sync(&ds4->dongle_hotplug_worker); | |
| } | |
| static inline void dualshock4_schedule_work(struct dualshock4 *ds4) | |
| { | |
| /* Using scoped_guard() instead of guard() to make sparse happy */ | |
| scoped_guard(spinlock_irqsave, &ds4->base.lock) | |
| if (ds4->output_worker_initialized) | |
| schedule_work(&ds4->output_worker); | |
| } | |
| static void dualshock4_set_bt_poll_interval(struct dualshock4 *ds4, u8 interval) | |
| { | |
| ds4->bt_poll_interval = interval; | |
| ds4->update_bt_poll_interval = true; | |
| dualshock4_schedule_work(ds4); | |
| } | |
| /* Set default lightbar color based on player. */ | |
| static void dualshock4_set_default_lightbar_colors(struct dualshock4 *ds4) | |
| { | |
| /* Use same player colors as PlayStation 4. | |
| * Array of colors is in RGB. | |
| */ | |
| static const int player_colors[4][3] = { | |
| { 0x00, 0x00, 0x40 }, /* Blue */ | |
| { 0x40, 0x00, 0x00 }, /* Red */ | |
| { 0x00, 0x40, 0x00 }, /* Green */ | |
| { 0x20, 0x00, 0x20 } /* Pink */ | |
| }; | |
| u8 player_id = ds4->base.player_id % ARRAY_SIZE(player_colors); | |
| ds4->lightbar_enabled = true; | |
| ds4->lightbar_red = player_colors[player_id][0]; | |
| ds4->lightbar_green = player_colors[player_id][1]; | |
| ds4->lightbar_blue = player_colors[player_id][2]; | |
| ds4->update_lightbar = true; | |
| dualshock4_schedule_work(ds4); | |
| } | |
| static struct ps_device *dualshock4_create(struct hid_device *hdev) | |
| { | |
| struct dualshock4 *ds4; | |
| struct ps_device *ps_dev; | |
| u8 max_output_report_size; | |
| int i, ret; | |
| /* The DualShock4 has an RGB lightbar, which the original hid-sony driver | |
| * exposed as a set of 4 LEDs for the 3 color channels and a global control. | |
| * Ideally this should have used the multi-color LED class, which didn't exist | |
| * yet. In addition the driver used a naming scheme not compliant with the LED | |
| * naming spec by using "<mac_address>:<color>", which contained many colons. | |
| * We use a more compliant by using "<device_name>:<color>" name now. Ideally | |
| * would have been "<device_name>:<color>:indicator", but that would break | |
| * existing applications (e.g. Android). Nothing matches against MAC address. | |
| */ | |
| static const struct ps_led_info lightbar_leds_info[] = { | |
| { NULL, "red", 255, dualshock4_led_get_brightness, | |
| dualshock4_led_set_brightness }, | |
| { NULL, "green", 255, dualshock4_led_get_brightness, | |
| dualshock4_led_set_brightness }, | |
| { NULL, "blue", 255, dualshock4_led_get_brightness, | |
| dualshock4_led_set_brightness }, | |
| { NULL, "global", 1, dualshock4_led_get_brightness, | |
| dualshock4_led_set_brightness, dualshock4_led_set_blink }, | |
| }; | |
| ds4 = devm_kzalloc(&hdev->dev, sizeof(*ds4), GFP_KERNEL); | |
| if (!ds4) | |
| return ERR_PTR(-ENOMEM); | |
| /* | |
| * Patch version to allow userspace to distinguish between | |
| * hid-generic vs hid-playstation axis and button mapping. | |
| */ | |
| hdev->version |= HID_PLAYSTATION_VERSION_PATCH; | |
| ps_dev = &ds4->base; | |
| ps_dev->hdev = hdev; | |
| spin_lock_init(&ps_dev->lock); | |
| ps_dev->battery_capacity = 100; /* initial value until parse_report. */ | |
| ps_dev->battery_status = POWER_SUPPLY_STATUS_UNKNOWN; | |
| ps_dev->parse_report = dualshock4_parse_report; | |
| ps_dev->remove = dualshock4_remove; | |
| INIT_WORK(&ds4->output_worker, dualshock4_output_worker); | |
| ds4->output_worker_initialized = true; | |
| hid_set_drvdata(hdev, ds4); | |
| max_output_report_size = sizeof(struct dualshock4_output_report_bt); | |
| ds4->output_report_dmabuf = devm_kzalloc(&hdev->dev, max_output_report_size, GFP_KERNEL); | |
| if (!ds4->output_report_dmabuf) | |
| return ERR_PTR(-ENOMEM); | |
| if (hdev->product == USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE) { | |
| ds4->dongle_state = DONGLE_DISCONNECTED; | |
| INIT_WORK(&ds4->dongle_hotplug_worker, dualshock4_dongle_calibration_work); | |
| /* Override parse report for dongle specific hotplug handling. */ | |
| ps_dev->parse_report = dualshock4_dongle_parse_report; | |
| } | |
| ret = dualshock4_get_mac_address(ds4); | |
| if (ret) { | |
| hid_err(hdev, "Failed to get MAC address from DualShock4\n"); | |
| return ERR_PTR(ret); | |
| } | |
| snprintf(hdev->uniq, sizeof(hdev->uniq), "%pMR", ds4->base.mac_address); | |
| ret = dualshock4_get_firmware_info(ds4); | |
| if (ret) { | |
| hid_warn(hdev, "Failed to get firmware info from DualShock4\n"); | |
| hid_warn(hdev, "HW/FW version data in sysfs will be invalid.\n"); | |
| } | |
| ret = ps_devices_list_add(ps_dev); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| ret = dualshock4_get_calibration_data(ds4); | |
| if (ret) { | |
| hid_warn(hdev, "Failed to get calibration data from DualShock4\n"); | |
| hid_warn(hdev, "Gyroscope and accelerometer will be inaccurate.\n"); | |
| } | |
| ds4->gamepad = ps_gamepad_create(hdev, dualshock4_play_effect); | |
| if (IS_ERR(ds4->gamepad)) { | |
| ret = PTR_ERR(ds4->gamepad); | |
| goto err; | |
| } | |
| /* Use gamepad input device name as primary device name for e.g. LEDs */ | |
| ps_dev->input_dev_name = dev_name(&ds4->gamepad->dev); | |
| ds4->sensors = ps_sensors_create(hdev, DS4_ACC_RANGE, DS4_ACC_RES_PER_G, | |
| DS4_GYRO_RANGE, DS4_GYRO_RES_PER_DEG_S); | |
| if (IS_ERR(ds4->sensors)) { | |
| ret = PTR_ERR(ds4->sensors); | |
| goto err; | |
| } | |
| ds4->touchpad = ps_touchpad_create(hdev, DS4_TOUCHPAD_WIDTH, DS4_TOUCHPAD_HEIGHT, 2); | |
| if (IS_ERR(ds4->touchpad)) { | |
| ret = PTR_ERR(ds4->touchpad); | |
| goto err; | |
| } | |
| ret = ps_device_register_battery(ps_dev); | |
| if (ret) | |
| goto err; | |
| for (i = 0; i < ARRAY_SIZE(lightbar_leds_info); i++) { | |
| const struct ps_led_info *led_info = &lightbar_leds_info[i]; | |
| ret = ps_led_register(ps_dev, &ds4->lightbar_leds[i], led_info); | |
| if (ret < 0) | |
| goto err; | |
| } | |
| dualshock4_set_bt_poll_interval(ds4, DS4_BT_DEFAULT_POLL_INTERVAL_MS); | |
| ret = ps_device_set_player_id(ps_dev); | |
| if (ret) { | |
| hid_err(hdev, "Failed to assign player id for DualShock4: %d\n", ret); | |
| goto err; | |
| } | |
| dualshock4_set_default_lightbar_colors(ds4); | |
| /* | |
| * Reporting hardware and firmware is important as there are frequent updates, which | |
| * can change behavior. | |
| */ | |
| hid_info(hdev, "Registered DualShock4 controller hw_version=0x%08x fw_version=0x%08x\n", | |
| ds4->base.hw_version, ds4->base.fw_version); | |
| return &ds4->base; | |
| err: | |
| ps_devices_list_remove(ps_dev); | |
| return ERR_PTR(ret); | |
| } | |
| static int ps_raw_event(struct hid_device *hdev, struct hid_report *report, | |
| u8 *data, int size) | |
| { | |
| struct ps_device *dev = hid_get_drvdata(hdev); | |
| if (dev && dev->parse_report) | |
| return dev->parse_report(dev, report, data, size); | |
| return 0; | |
| } | |
| static int ps_probe(struct hid_device *hdev, const struct hid_device_id *id) | |
| { | |
| struct ps_device *dev; | |
| int ret; | |
| ret = hid_parse(hdev); | |
| if (ret) { | |
| hid_err(hdev, "Parse failed\n"); | |
| return ret; | |
| } | |
| ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); | |
| if (ret) { | |
| hid_err(hdev, "Failed to start HID device\n"); | |
| return ret; | |
| } | |
| ret = hid_hw_open(hdev); | |
| if (ret) { | |
| hid_err(hdev, "Failed to open HID device\n"); | |
| goto err_stop; | |
| } | |
| if (id->driver_data == PS_TYPE_PS4_DUALSHOCK4) { | |
| dev = dualshock4_create(hdev); | |
| if (IS_ERR(dev)) { | |
| hid_err(hdev, "Failed to create dualshock4.\n"); | |
| ret = PTR_ERR(dev); | |
| goto err_close; | |
| } | |
| } else if (id->driver_data == PS_TYPE_PS5_DUALSENSE) { | |
| dev = dualsense_create(hdev); | |
| if (IS_ERR(dev)) { | |
| hid_err(hdev, "Failed to create dualsense.\n"); | |
| ret = PTR_ERR(dev); | |
| goto err_close; | |
| } | |
| } | |
| return ret; | |
| err_close: | |
| hid_hw_close(hdev); | |
| err_stop: | |
| hid_hw_stop(hdev); | |
| return ret; | |
| } | |
| static void ps_remove(struct hid_device *hdev) | |
| { | |
| struct ps_device *dev = hid_get_drvdata(hdev); | |
| ps_devices_list_remove(dev); | |
| ps_device_release_player_id(dev); | |
| if (dev->remove) | |
| dev->remove(dev); | |
| hid_hw_close(hdev); | |
| hid_hw_stop(hdev); | |
| } | |
| static const struct hid_device_id ps_devices[] = { | |
| /* Sony DualShock 4 controllers for PS4 */ | |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER), | |
| .driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER), | |
| .driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2), | |
| .driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2), | |
| .driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE), | |
| .driver_data = PS_TYPE_PS4_DUALSHOCK4 }, | |
| /* Sony DualSense controllers for PS5 */ | |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER), | |
| .driver_data = PS_TYPE_PS5_DUALSENSE }, | |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER), | |
| .driver_data = PS_TYPE_PS5_DUALSENSE }, | |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER_2), | |
| .driver_data = PS_TYPE_PS5_DUALSENSE }, | |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER_2), | |
| .driver_data = PS_TYPE_PS5_DUALSENSE }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(hid, ps_devices); | |
| static struct hid_driver ps_driver = { | |
| .name = "playstation", | |
| .id_table = ps_devices, | |
| .probe = ps_probe, | |
| .remove = ps_remove, | |
| .raw_event = ps_raw_event, | |
| .driver = { | |
| .dev_groups = ps_device_groups, | |
| }, | |
| }; | |
| static int __init ps_init(void) | |
| { | |
| return hid_register_driver(&ps_driver); | |
| } | |
| static void __exit ps_exit(void) | |
| { | |
| hid_unregister_driver(&ps_driver); | |
| ida_destroy(&ps_player_id_allocator); | |
| } | |
| module_init(ps_init); | |
| module_exit(ps_exit); | |
| MODULE_AUTHOR("Sony Interactive Entertainment"); | |
| MODULE_DESCRIPTION("HID Driver for PlayStation peripherals."); | |
| MODULE_LICENSE("GPL"); |