drivers/hwmon/ltc4282.c

// SPDX-License-Identifier: GPL-2.0
/*
 * Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C
 *
 * Copyright 2023 Analog Devices Inc.
 */
#include <linux/bitfield.h>
#include <linux/cleanup.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/hwmon.h>
#include <linux/i2c.h>
#include <linux/math.h>
#include <linux/minmax.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/property.h>
#include <linux/string.h>
#include <linux/units.h>
#include <linux/util_macros.h>

#define LTC4282_CTRL_LSB			0x00
  #define LTC4282_CTRL_OV_RETRY_MASK		BIT(0)
  #define LTC4282_CTRL_UV_RETRY_MASK		BIT(1)
  #define LTC4282_CTRL_OC_RETRY_MASK		BIT(2)
  #define LTC4282_CTRL_ON_ACTIVE_LOW_MASK	BIT(5)
  #define LTC4282_CTRL_ON_DELAY_MASK		BIT(6)
#define LTC4282_CTRL_MSB			0x01
  #define LTC4282_CTRL_VIN_MODE_MASK		GENMASK(1, 0)
  #define LTC4282_CTRL_OV_MODE_MASK		GENMASK(3, 2)
  #define LTC4282_CTRL_UV_MODE_MASK		GENMASK(5, 4)
#define LTC4282_FAULT_LOG			0x04
  #define LTC4282_OV_FAULT_MASK			BIT(0)
  #define LTC4282_UV_FAULT_MASK			BIT(1)
  #define LTC4282_VDD_FAULT_MASK \
		(LTC4282_OV_FAULT_MASK | LTC4282_UV_FAULT_MASK)
  #define LTC4282_OC_FAULT_MASK			BIT(2)
  #define LTC4282_POWER_BAD_FAULT_MASK		BIT(3)
  #define LTC4282_FET_SHORT_FAULT_MASK		BIT(5)
  #define LTC4282_FET_BAD_FAULT_MASK		BIT(6)
  #define LTC4282_FET_FAILURE_FAULT_MASK \
		(LTC4282_FET_SHORT_FAULT_MASK | LTC4282_FET_BAD_FAULT_MASK)
#define LTC4282_ADC_ALERT_LOG			0x05
  #define LTC4282_GPIO_ALARM_L_MASK		BIT(0)
  #define LTC4282_GPIO_ALARM_H_MASK		BIT(1)
  #define LTC4282_VSOURCE_ALARM_L_MASK		BIT(2)
  #define LTC4282_VSOURCE_ALARM_H_MASK		BIT(3)
  #define LTC4282_VSENSE_ALARM_L_MASK		BIT(4)
  #define LTC4282_VSENSE_ALARM_H_MASK		BIT(5)
  #define LTC4282_POWER_ALARM_L_MASK		BIT(6)
  #define LTC4282_POWER_ALARM_H_MASK		BIT(7)
#define LTC4282_FET_BAD_FAULT_TIMEOUT		0x06
  #define LTC4282_FET_BAD_MAX_TIMEOUT		255
#define LTC4282_GPIO_CONFIG			0x07
  #define LTC4282_GPIO_2_FET_STRESS_MASK	BIT(1)
  #define LTC4282_GPIO_1_CONFIG_MASK		GENMASK(5, 4)
#define LTC4282_VGPIO_MIN			0x08
#define LTC4282_VGPIO_MAX			0x09
#define LTC4282_VSOURCE_MIN			0x0a
#define LTC4282_VSOURCE_MAX			0x0b
#define LTC4282_VSENSE_MIN			0x0c
#define LTC4282_VSENSE_MAX			0x0d
#define LTC4282_POWER_MIN			0x0e
#define LTC4282_POWER_MAX			0x0f
#define LTC4282_CLK_DIV				0x10
  #define LTC4282_CLK_DIV_MASK			GENMASK(4, 0)
  #define LTC4282_CLKOUT_MASK			GENMASK(6, 5)
#define LTC4282_ILIM_ADJUST			0x11
  #define LTC4282_GPIO_MODE_MASK		BIT(1)
  #define LTC4282_VDD_MONITOR_MASK		BIT(2)
  #define LTC4282_FOLDBACK_MODE_MASK		GENMASK(4, 3)
  #define LTC4282_ILIM_ADJUST_MASK		GENMASK(7, 5)
#define LTC4282_ENERGY				0x12
#define LTC4282_TIME_COUNTER			0x18
#define LTC4282_ALERT_CTRL			0x1c
  #define LTC4282_ALERT_OUT_MASK		BIT(6)
#define LTC4282_ADC_CTRL			0x1d
  #define LTC4282_FAULT_LOG_EN_MASK		BIT(2)
  #define LTC4282_METER_HALT_MASK		BIT(5)
  #define LTC4282_METER_RESET_MASK		BIT(6)
  #define LTC4282_RESET_MASK			BIT(7)
#define LTC4282_STATUS_LSB			0x1e
  #define LTC4282_OV_STATUS_MASK		BIT(0)
  #define LTC4282_UV_STATUS_MASK		BIT(1)
  #define LTC4282_VDD_STATUS_MASK \
		(LTC4282_OV_STATUS_MASK | LTC4282_UV_STATUS_MASK)
  #define LTC4282_OC_STATUS_MASK		BIT(2)
  #define LTC4282_POWER_GOOD_MASK		BIT(3)
  #define LTC4282_FET_FAILURE_MASK		GENMASK(6, 5)
#define LTC4282_STATUS_MSB			0x1f
#define LTC4282_RESERVED_1			0x32
#define LTC4282_RESERVED_2			0x33
#define LTC4282_VGPIO				0x34
#define LTC4282_VGPIO_LOWEST			0x36
#define LTC4282_VGPIO_HIGHEST			0x38
#define LTC4282_VSOURCE				0x3a
#define LTC4282_VSOURCE_LOWEST			0x3c
#define LTC4282_VSOURCE_HIGHEST			0x3e
#define LTC4282_VSENSE				0x40
#define LTC4282_VSENSE_LOWEST			0x42
#define LTC4282_VSENSE_HIGHEST			0x44
#define LTC4282_POWER				0x46
#define LTC4282_POWER_LOWEST			0x48
#define LTC4282_POWER_HIGHEST			0x4a
#define LTC4282_RESERVED_3			0x50

#define LTC4282_CLKIN_MIN	(250 * KILO)
#define LTC4282_CLKIN_MAX	(15500 * KILO)
#define LTC4282_CLKIN_RANGE	(LTC4282_CLKIN_MAX - LTC4282_CLKIN_MIN + 1)
#define LTC4282_CLKOUT_SYSTEM	(250 * KILO)
#define LTC4282_CLKOUT_CNV	15

enum {
	LTC4282_CHAN_VSOURCE,
	LTC4282_CHAN_VDD,
	LTC4282_CHAN_VGPIO,
};

struct ltc4282_cache {
	u32 in_max_raw;
	u32 in_min_raw;
	long in_highest;
	long in_lowest;
	bool en;
};

struct ltc4282_state {
	struct regmap *map;
	struct clk_hw clk_hw;
	/*
	 * Used to cache values for VDD/VSOURCE depending which will be used
	 * when hwmon is not enabled for that channel. Needed because they share
	 * the same registers.
	 */
	struct ltc4282_cache in0_1_cache[LTC4282_CHAN_VGPIO];
	u32 vsense_max;
	long power_max;
	u32 rsense;
	u16 vdd;
	u16 vfs_out;
	bool energy_en;
};

enum {
	LTC4282_CLKOUT_NONE,
	LTC4282_CLKOUT_INT,
	LTC4282_CLKOUT_TICK,
};

static int ltc4282_set_rate(struct clk_hw *hw,
			    unsigned long rate, unsigned long parent_rate)
{
	struct ltc4282_state *st = container_of(hw, struct ltc4282_state,
						clk_hw);
	u32 val = LTC4282_CLKOUT_INT;

	if (rate == LTC4282_CLKOUT_CNV)
		val = LTC4282_CLKOUT_TICK;

	return regmap_update_bits(st->map, LTC4282_CLK_DIV, LTC4282_CLKOUT_MASK,
				  FIELD_PREP(LTC4282_CLKOUT_MASK, val));
}

/*
 * Note the 15HZ conversion rate assumes 12bit ADC which is what we are
 * supporting for now.
 */
static const unsigned int ltc4282_out_rates[] = {
	LTC4282_CLKOUT_CNV, LTC4282_CLKOUT_SYSTEM
};

static int ltc4282_determine_rate(struct clk_hw *hw,
				  struct clk_rate_request *req)
{
	int idx = find_closest(req->rate, ltc4282_out_rates,
			       ARRAY_SIZE(ltc4282_out_rates));

	req->rate = ltc4282_out_rates[idx];

	return 0;
}

static unsigned long ltc4282_recalc_rate(struct clk_hw *hw,
					 unsigned long parent)
{
	struct ltc4282_state *st = container_of(hw, struct ltc4282_state,
						clk_hw);
	u32 clkdiv;
	int ret;

	ret = regmap_read(st->map, LTC4282_CLK_DIV, &clkdiv);
	if (ret)
		return 0;

	clkdiv = FIELD_GET(LTC4282_CLKOUT_MASK, clkdiv);
	if (!clkdiv)
		return 0;
	if (clkdiv == LTC4282_CLKOUT_INT)
		return LTC4282_CLKOUT_SYSTEM;

	return LTC4282_CLKOUT_CNV;
}

static void ltc4282_disable(struct clk_hw *clk_hw)
{
	struct ltc4282_state *st = container_of(clk_hw, struct ltc4282_state,
						clk_hw);

	regmap_clear_bits(st->map, LTC4282_CLK_DIV, LTC4282_CLKOUT_MASK);
}

static int ltc4282_read_voltage_word(const struct ltc4282_state *st, u32 reg,
				     u32 fs, long *val)
{
	__be16 in;
	int ret;

	ret = regmap_bulk_read(st->map, reg, &in, sizeof(in));
	if (ret)
		return ret;

	/*
	 * This is also used to calculate current in which case fs comes in
	 * 10 * uV. Hence the ULL usage.
	 */
	*val = DIV_ROUND_CLOSEST_ULL(be16_to_cpu(in) * (u64)fs, U16_MAX);
	return 0;
}

static int ltc4282_read_voltage_byte_cached(const struct ltc4282_state *st,
					    u32 reg, u32 fs, long *val,
					    u32 *cached_raw)
{
	int ret;
	u32 in;

	if (cached_raw) {
		in = *cached_raw;
	} else {
		ret = regmap_read(st->map, reg, &in);
		if (ret)
			return ret;
	}

	*val = DIV_ROUND_CLOSEST(in * fs, U8_MAX);
	return 0;
}

static int ltc4282_read_voltage_byte(const struct ltc4282_state *st, u32 reg,
				     u32 fs, long *val)
{
	return ltc4282_read_voltage_byte_cached(st, reg, fs, val, NULL);
}

static int __ltc4282_read_alarm(struct ltc4282_state *st, u32 reg, u32 mask,
				long *val)
{
	u32 alarm;
	int ret;

	ret = regmap_read(st->map, reg, &alarm);
	if (ret)
		return ret;

	*val = !!(alarm & mask);

	/* if not status/fault logs, clear the alarm after reading it */
	if (reg != LTC4282_STATUS_LSB && reg != LTC4282_FAULT_LOG)
		return regmap_clear_bits(st->map, reg, mask);

	return 0;
}

static int ltc4282_read_alarm(struct ltc4282_state *st, u32 reg, u32 mask,
			      long *val)
{
	return __ltc4282_read_alarm(st, reg, mask, val);
}

static int ltc4282_vdd_source_read_in(struct ltc4282_state *st, u32 channel,
				      long *val)
{
	if (!st->in0_1_cache[channel].en)
		return -ENODATA;

	return ltc4282_read_voltage_word(st, LTC4282_VSOURCE, st->vfs_out, val);
}

static int ltc4282_vdd_source_read_hist(struct ltc4282_state *st, u32 reg,
					u32 channel, long *cached, long *val)
{
	int ret;

	if (!st->in0_1_cache[channel].en) {
		*val = *cached;
		return 0;
	}

	ret = ltc4282_read_voltage_word(st, reg, st->vfs_out, val);
	if (ret)
		return ret;

	*cached = *val;
	return 0;
}

static int ltc4282_vdd_source_read_lim(struct ltc4282_state *st, u32 reg,
				       u32 channel, u32 *cached, long *val)
{
	if (!st->in0_1_cache[channel].en)
		return ltc4282_read_voltage_byte_cached(st, reg, st->vfs_out,
							val, cached);

	return ltc4282_read_voltage_byte(st, reg, st->vfs_out, val);
}

static int ltc4282_vdd_source_read_alm(struct ltc4282_state *st, u32 mask,
				       u32 channel, long *val)
{
	if (!st->in0_1_cache[channel].en) {
		/*
		 * Do this otherwise alarms can get confused because we clear
		 * them after reading them. So, if someone mistakenly reads
		 * VSOURCE right before VDD (or the other way around), we might
		 * get no alarm just because it was cleared when reading VSOURCE
		 * and had no time for a new conversion and thus having the
		 * alarm again.
		 */
		*val = 0;
		return 0;
	}

	return __ltc4282_read_alarm(st, LTC4282_ADC_ALERT_LOG, mask, val);
}

static int ltc4282_read_in(struct ltc4282_state *st, u32 attr, long *val,
			   u32 channel)
{
	switch (attr) {
	case hwmon_in_input:
		if (channel == LTC4282_CHAN_VGPIO)
			return ltc4282_read_voltage_word(st, LTC4282_VGPIO,
							 1280, val);

		return ltc4282_vdd_source_read_in(st, channel, val);
	case hwmon_in_highest:
		if (channel == LTC4282_CHAN_VGPIO)
			return ltc4282_read_voltage_word(st,
							 LTC4282_VGPIO_HIGHEST,
							 1280, val);

		return ltc4282_vdd_source_read_hist(st, LTC4282_VSOURCE_HIGHEST,
						    channel,
						    &st->in0_1_cache[channel].in_highest, val);
	case hwmon_in_lowest:
		if (channel == LTC4282_CHAN_VGPIO)
			return ltc4282_read_voltage_word(st, LTC4282_VGPIO_LOWEST,
							 1280, val);

		return ltc4282_vdd_source_read_hist(st, LTC4282_VSOURCE_LOWEST,
						    channel,
						    &st->in0_1_cache[channel].in_lowest, val);
	case hwmon_in_max_alarm:
		if (channel == LTC4282_CHAN_VGPIO)
			return ltc4282_read_alarm(st, LTC4282_ADC_ALERT_LOG,
						  LTC4282_GPIO_ALARM_H_MASK,
						  val);

		return ltc4282_vdd_source_read_alm(st,
						   LTC4282_VSOURCE_ALARM_H_MASK,
						   channel, val);
	case hwmon_in_min_alarm:
		if (channel == LTC4282_CHAN_VGPIO)
			ltc4282_read_alarm(st, LTC4282_ADC_ALERT_LOG,
					   LTC4282_GPIO_ALARM_L_MASK, val);

		return ltc4282_vdd_source_read_alm(st,
						   LTC4282_VSOURCE_ALARM_L_MASK,
						   channel, val);
	case hwmon_in_crit_alarm:
		return ltc4282_read_alarm(st, LTC4282_STATUS_LSB,
					  LTC4282_OV_STATUS_MASK, val);
	case hwmon_in_lcrit_alarm:
		return ltc4282_read_alarm(st, LTC4282_STATUS_LSB,
					  LTC4282_UV_STATUS_MASK, val);
	case hwmon_in_max:
		if (channel == LTC4282_CHAN_VGPIO)
			return ltc4282_read_voltage_byte(st, LTC4282_VGPIO_MAX,
							 1280, val);

		return ltc4282_vdd_source_read_lim(st, LTC4282_VSOURCE_MAX,
						   channel,
						   &st->in0_1_cache[channel].in_max_raw, val);
	case hwmon_in_min:
		if (channel == LTC4282_CHAN_VGPIO)
			return ltc4282_read_voltage_byte(st, LTC4282_VGPIO_MIN,
							 1280, val);

		return ltc4282_vdd_source_read_lim(st, LTC4282_VSOURCE_MIN,
						   channel,
						   &st->in0_1_cache[channel].in_min_raw, val);
	case hwmon_in_enable:
		*val = st->in0_1_cache[channel].en;
		return 0;
	case hwmon_in_fault:
		/*
		 * We report failure if we detect either a fer_bad or a
		 * fet_short in the status register.
		 */
		return ltc4282_read_alarm(st, LTC4282_STATUS_LSB,
					  LTC4282_FET_FAILURE_MASK, val);
	default:
		return -EOPNOTSUPP;
	}
}

static int ltc4282_read_current_word(const struct ltc4282_state *st, u32 reg,
				     long *val)
{
	long in;
	int ret;

	/*
	 * We pass in full scale in 10 * micro (note that 40 is already
	 * millivolt) so we have better approximations to calculate current.
	 */
	ret = ltc4282_read_voltage_word(st, reg, DECA * 40 * MILLI, &in);
	if (ret)
		return ret;

	*val = DIV_ROUND_CLOSEST(in * MILLI, st->rsense);

	return 0;
}

static int ltc4282_read_current_byte(const struct ltc4282_state *st, u32 reg,
				     long *val)
{
	long in;
	int ret;

	ret = ltc4282_read_voltage_byte(st, reg, DECA * 40 * MILLI, &in);
	if (ret)
		return ret;

	*val = DIV_ROUND_CLOSEST(in * MILLI, st->rsense);

	return 0;
}

static int ltc4282_read_curr(struct ltc4282_state *st, const u32 attr,
			     long *val)
{
	switch (attr) {
	case hwmon_curr_input:
		return ltc4282_read_current_word(st, LTC4282_VSENSE, val);
	case hwmon_curr_highest:
		return ltc4282_read_current_word(st, LTC4282_VSENSE_HIGHEST,
						 val);
	case hwmon_curr_lowest:
		return ltc4282_read_current_word(st, LTC4282_VSENSE_LOWEST,
						 val);
	case hwmon_curr_max:
		return ltc4282_read_current_byte(st, LTC4282_VSENSE_MAX, val);
	case hwmon_curr_min:
		return ltc4282_read_current_byte(st, LTC4282_VSENSE_MIN, val);
	case hwmon_curr_max_alarm:
		return ltc4282_read_alarm(st, LTC4282_ADC_ALERT_LOG,
					  LTC4282_VSENSE_ALARM_H_MASK, val);
	case hwmon_curr_min_alarm:
		return ltc4282_read_alarm(st, LTC4282_ADC_ALERT_LOG,
					  LTC4282_VSENSE_ALARM_L_MASK, val);
	case hwmon_curr_crit_alarm:
		return ltc4282_read_alarm(st, LTC4282_STATUS_LSB,
					  LTC4282_OC_STATUS_MASK, val);
	default:
		return -EOPNOTSUPP;
	}
}

static int ltc4282_read_power_word(const struct ltc4282_state *st, u32 reg,
				   long *val)
{
	u64 temp =  DECA * 40ULL * st->vfs_out * BIT(16), temp_2;
	__be16 raw;
	u16 power;
	int ret;

	ret = regmap_bulk_read(st->map, reg, &raw, sizeof(raw));
	if (ret)
		return ret;

	power = be16_to_cpu(raw);
	/*
	 * Power is given by:
	 *     P = CODE(16b) * 0.040 * Vfs(out) * 2^16 / ((2^16 - 1)^2 * Rsense)
	 */
	if (check_mul_overflow(power * temp, MICRO, &temp_2)) {
		temp = DIV_ROUND_CLOSEST_ULL(power * temp, U16_MAX);
		*val = DIV64_U64_ROUND_CLOSEST(temp * MICRO,
					       U16_MAX * (u64)st->rsense);
		return 0;
	}

	*val = DIV64_U64_ROUND_CLOSEST(temp_2,
				       st->rsense * int_pow(U16_MAX, 2));

	return 0;
}

static int ltc4282_read_power_byte(const struct ltc4282_state *st, u32 reg,
				   long *val)
{
	u32 power;
	u64 temp;
	int ret;

	ret = regmap_read(st->map, reg, &power);
	if (ret)
		return ret;

	temp = power * 40 * DECA * st->vfs_out * BIT_ULL(8);
	*val = DIV64_U64_ROUND_CLOSEST(temp * MICRO,
				       int_pow(U8_MAX, 2) * st->rsense);

	return 0;
}

static int ltc4282_read_energy(const struct ltc4282_state *st, s64 *val)
{
	u64 temp, energy;
	__be64 raw;
	int ret;

	ret = regmap_bulk_read(st->map, LTC4282_ENERGY, &raw, 6);
	if (ret)
		return ret;

	energy =  be64_to_cpu(raw) >> 16;
	/*
	 * The formula for energy is given by:
	 *	E = CODE(48b) * 0.040 * Vfs(out) * Tconv * 256 /
	 *						((2^16 - 1)^2 * Rsense)
	 *
	 * Since we only support 12bit ADC, Tconv = 0.065535s. Passing Vfs(out)
	 * and 0.040 to mV and Tconv to us, we can simplify the formula to:
	 *	E = CODE(48b) * 40 * Vfs(out) * 256 / (U16_MAX * Rsense)
	 *
	 * As Rsense can have tenths of micro-ohm resolution, we need to
	 * multiply by DECA to get microujoule.
	 */
	if (check_mul_overflow(DECA * st->vfs_out * 40 * BIT(8), energy, &temp)) {
		temp = DIV_ROUND_CLOSEST(DECA * st->vfs_out * 40 * BIT(8), U16_MAX);
		*val = DIV_ROUND_CLOSEST_ULL(temp * energy, st->rsense);
		return 0;
	}

	*val = DIV64_U64_ROUND_CLOSEST(temp, U16_MAX * (u64)st->rsense);

	return 0;
}

static int ltc4282_read_power(struct ltc4282_state *st, const u32 attr,
			      long *val)
{
	switch (attr) {
	case hwmon_power_input:
		return ltc4282_read_power_word(st, LTC4282_POWER, val);
	case hwmon_power_input_highest:
		return ltc4282_read_power_word(st, LTC4282_POWER_HIGHEST, val);
	case hwmon_power_input_lowest:
		return ltc4282_read_power_word(st, LTC4282_POWER_LOWEST, val);
	case hwmon_power_max_alarm:
		return ltc4282_read_alarm(st, LTC4282_ADC_ALERT_LOG,
					  LTC4282_POWER_ALARM_H_MASK, val);
	case hwmon_power_min_alarm:
		return ltc4282_read_alarm(st, LTC4282_ADC_ALERT_LOG,
					  LTC4282_POWER_ALARM_L_MASK, val);
	case hwmon_power_max:
		return ltc4282_read_power_byte(st, LTC4282_POWER_MAX, val);
	case hwmon_power_min:
		return ltc4282_read_power_byte(st, LTC4282_POWER_MIN, val);
	default:
		return -EOPNOTSUPP;
	}
}

static int ltc4282_read(struct device *dev, enum hwmon_sensor_types type,
			u32 attr, int channel, long *val)
{
	struct ltc4282_state *st = dev_get_drvdata(dev);

	switch (type) {
	case hwmon_in:
		return ltc4282_read_in(st, attr, val, channel);
	case hwmon_curr:
		return ltc4282_read_curr(st, attr, val);
	case hwmon_power:
		return ltc4282_read_power(st, attr, val);
	case hwmon_energy:
		*val = st->energy_en;
		return 0;
	case hwmon_energy64:
		if (st->energy_en)
			return ltc4282_read_energy(st, (s64 *)val);
		return -ENODATA;
	default:
		return -EOPNOTSUPP;
	}
}

static int ltc4282_write_power_byte(const struct ltc4282_state *st, u32 reg,
				    long val)
{
	u32 power;
	u64 temp;

	if (val > st->power_max)
		val = st->power_max;

	temp = val * int_pow(U8_MAX, 2) * st->rsense;
	power = DIV64_U64_ROUND_CLOSEST(temp,
					MICRO * DECA * 256ULL * st->vfs_out * 40);

	return regmap_write(st->map, reg, power);
}

static int ltc4282_write_power_word(const struct ltc4282_state *st, u32 reg,
				    long val)
{
	u64 temp = int_pow(U16_MAX, 2) * st->rsense, temp_2;
	__be16 __raw;
	u16 code;

	if (check_mul_overflow(temp, val, &temp_2)) {
		temp = DIV_ROUND_CLOSEST_ULL(temp, DECA * MICRO);
		code = DIV64_U64_ROUND_CLOSEST(temp * val,
					       40ULL * BIT(16) * st->vfs_out);
	} else {
		temp =  DECA * MICRO * 40ULL * BIT(16) * st->vfs_out;
		code = DIV64_U64_ROUND_CLOSEST(temp_2, temp);
	}

	__raw = cpu_to_be16(code);
	return regmap_bulk_write(st->map, reg, &__raw, sizeof(__raw));
}

static int __ltc4282_in_write_history(const struct ltc4282_state *st, u32 reg,
				      long lowest, long highest, u32 fs)
{
	__be16 __raw;
	u16 tmp;
	int ret;

	tmp = DIV_ROUND_CLOSEST(U16_MAX * lowest, fs);

	__raw = cpu_to_be16(tmp);

	ret = regmap_bulk_write(st->map, reg, &__raw, 2);
	if (ret)
		return ret;

	tmp = DIV_ROUND_CLOSEST(U16_MAX * highest, fs);

	__raw = cpu_to_be16(tmp);

	return regmap_bulk_write(st->map, reg + 2, &__raw, 2);
}

static int ltc4282_in_write_history(struct ltc4282_state *st, u32 reg,
				    long lowest, long highest, u32 fs)
{
	return __ltc4282_in_write_history(st, reg, lowest, highest, fs);
}

static int ltc4282_power_reset_hist(struct ltc4282_state *st)
{
	int ret;

	ret = ltc4282_write_power_word(st, LTC4282_POWER_LOWEST,
				       st->power_max);
	if (ret)
		return ret;

	ret = ltc4282_write_power_word(st, LTC4282_POWER_HIGHEST, 0);
	if (ret)
		return ret;

	/* now, let's also clear possible power_bad fault logs */
	return regmap_clear_bits(st->map, LTC4282_FAULT_LOG,
				 LTC4282_POWER_BAD_FAULT_MASK);
}

static int ltc4282_write_power(struct ltc4282_state *st, u32 attr,
			       long val)
{
	switch (attr) {
	case hwmon_power_max:
		return ltc4282_write_power_byte(st, LTC4282_POWER_MAX, val);
	case hwmon_power_min:
		return ltc4282_write_power_byte(st, LTC4282_POWER_MIN, val);
	case hwmon_power_reset_history:
		return ltc4282_power_reset_hist(st);
	default:
		return -EOPNOTSUPP;
	}
}

static int ltc4282_write_voltage_byte_cached(const struct ltc4282_state *st,
					     u32 reg, u32 fs, long val,
					     u32 *cache_raw)
{
	u32 in;

	val = clamp_val(val, 0, fs);
	in = DIV_ROUND_CLOSEST(val * U8_MAX, fs);

	if (cache_raw) {
		*cache_raw = in;
		return 0;
	}

	return regmap_write(st->map, reg, in);
}

static int ltc4282_write_voltage_byte(const struct ltc4282_state *st, u32 reg,
				      u32 fs, long val)
{
	return ltc4282_write_voltage_byte_cached(st, reg, fs, val, NULL);
}

static int ltc4282_cache_history(struct ltc4282_state *st, u32 channel)
{
	long val;
	int ret;

	ret = ltc4282_read_voltage_word(st, LTC4282_VSOURCE_LOWEST, st->vfs_out,
					&val);
	if (ret)
		return ret;

	st->in0_1_cache[channel].in_lowest = val;

	ret = ltc4282_read_voltage_word(st, LTC4282_VSOURCE_HIGHEST,
					st->vfs_out, &val);
	if (ret)
		return ret;

	st->in0_1_cache[channel].in_highest = val;

	ret = regmap_read(st->map, LTC4282_VSOURCE_MIN,
			  &st->in0_1_cache[channel].in_min_raw);
	if (ret)
		return ret;

	return regmap_read(st->map, LTC4282_VSOURCE_MAX,
			  &st->in0_1_cache[channel].in_max_raw);
}

static int ltc4282_cache_sync(struct ltc4282_state *st, u32 channel)
{
	int ret;

	ret = __ltc4282_in_write_history(st, LTC4282_VSOURCE_LOWEST,
					 st->in0_1_cache[channel].in_lowest,
					 st->in0_1_cache[channel].in_highest,
					 st->vfs_out);
	if (ret)
		return ret;

	ret = regmap_write(st->map, LTC4282_VSOURCE_MIN,
			   st->in0_1_cache[channel].in_min_raw);
	if (ret)
		return ret;

	return regmap_write(st->map, LTC4282_VSOURCE_MAX,
			    st->in0_1_cache[channel].in_max_raw);
}

static int ltc4282_vdd_source_write_lim(struct ltc4282_state *st, u32 reg,
					int channel, u32 *cache, long val)
{
	int ret;

	if (st->in0_1_cache[channel].en)
		ret = ltc4282_write_voltage_byte(st, reg, st->vfs_out, val);
	else
		ret = ltc4282_write_voltage_byte_cached(st, reg, st->vfs_out,
							val, cache);

	return ret;
}

static int ltc4282_vdd_source_reset_hist(struct ltc4282_state *st, int channel)
{
	long lowest = st->vfs_out;
	int ret;

	if (channel == LTC4282_CHAN_VDD)
		lowest = st->vdd;

	if (st->in0_1_cache[channel].en) {
		ret = __ltc4282_in_write_history(st, LTC4282_VSOURCE_LOWEST,
						 lowest, 0, st->vfs_out);
		if (ret)
			return ret;
	}

	st->in0_1_cache[channel].in_lowest = lowest;
	st->in0_1_cache[channel].in_highest = 0;

	/*
	 * We are also clearing possible fault logs in reset_history. Clearing
	 * the logs might be important when the auto retry bits are not enabled
	 * as the chip only enables the output again after having these logs
	 * cleared. As some of these logs are related to limits, it makes sense
	 * to clear them in here. For VDD, we need to clear under/over voltage
	 * events. For VSOURCE, fet_short and fet_bad...
	 */
	if (channel == LTC4282_CHAN_VSOURCE)
		return regmap_clear_bits(st->map, LTC4282_FAULT_LOG,
					 LTC4282_FET_FAILURE_FAULT_MASK);

	return regmap_clear_bits(st->map, LTC4282_FAULT_LOG,
				 LTC4282_VDD_FAULT_MASK);
}

/*
 * We need to mux between VSOURCE and VDD which means they are mutually
 * exclusive. Moreover, we can't really disable both VDD and VSOURCE as the ADC
 * is continuously running (we cannot independently halt it without also
 * stopping VGPIO). Hence, the logic is that disabling or enabling VDD will
 * automatically have the reverse effect on VSOURCE and vice-versa.
 */
static int ltc4282_vdd_source_enable(struct ltc4282_state *st, int channel,
				     long val)
{
	int ret, other_chan = ~channel & 0x1;
	u8 __val = val;

	if (st->in0_1_cache[channel].en == !!val)
		return 0;

	/* clearing the bit makes the ADC to monitor VDD */
	if (channel == LTC4282_CHAN_VDD)
		__val = !__val;

	ret = regmap_update_bits(st->map, LTC4282_ILIM_ADJUST,
				 LTC4282_VDD_MONITOR_MASK,
				 FIELD_PREP(LTC4282_VDD_MONITOR_MASK, !!__val));
	if (ret)
		return ret;

	st->in0_1_cache[channel].en = !!val;
	st->in0_1_cache[other_chan].en = !val;

	if (st->in0_1_cache[channel].en) {
		/*
		 * Then, we are disabling @other_chan. Let's save it's current
		 * history.
		 */
		ret = ltc4282_cache_history(st, other_chan);
		if (ret)
			return ret;

		return ltc4282_cache_sync(st, channel);
	}
	/*
	 * Then, we are enabling @other_chan. We need to do the opposite from
	 * above.
	 */
	ret = ltc4282_cache_history(st, channel);
	if (ret)
		return ret;

	return ltc4282_cache_sync(st, other_chan);
}

static int ltc4282_write_in(struct ltc4282_state *st, u32 attr, long val,
			    int channel)
{
	switch (attr) {
	case hwmon_in_max:
		if (channel == LTC4282_CHAN_VGPIO)
			return ltc4282_write_voltage_byte(st, LTC4282_VGPIO_MAX,
							  1280, val);

		return ltc4282_vdd_source_write_lim(st, LTC4282_VSOURCE_MAX,
						    channel,
						    &st->in0_1_cache[channel].in_max_raw, val);
	case hwmon_in_min:
		if (channel == LTC4282_CHAN_VGPIO)
			return ltc4282_write_voltage_byte(st, LTC4282_VGPIO_MIN,
							  1280, val);

		return ltc4282_vdd_source_write_lim(st, LTC4282_VSOURCE_MIN,
						    channel,
						    &st->in0_1_cache[channel].in_min_raw, val);
	case hwmon_in_reset_history:
		if (channel == LTC4282_CHAN_VGPIO)
			return ltc4282_in_write_history(st,
							LTC4282_VGPIO_LOWEST,
							1280, 0, 1280);

		return ltc4282_vdd_source_reset_hist(st, channel);
	case hwmon_in_enable:
		return ltc4282_vdd_source_enable(st, channel, val);
	default:
		return -EOPNOTSUPP;
	}
}

static int ltc4282_curr_reset_hist(struct ltc4282_state *st)
{
	int ret;

	ret = __ltc4282_in_write_history(st, LTC4282_VSENSE_LOWEST,
					 st->vsense_max, 0, 40 * MILLI);
	if (ret)
		return ret;

	/* now, let's also clear possible overcurrent fault logs */
	return regmap_clear_bits(st->map, LTC4282_FAULT_LOG,
				 LTC4282_OC_FAULT_MASK);
}

static int ltc4282_write_curr(struct ltc4282_state *st, u32 attr,
			      long val)
{
	/* need to pass it in millivolt */
	u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO);

	switch (attr) {
	case hwmon_curr_max:
		return ltc4282_write_voltage_byte(st, LTC4282_VSENSE_MAX, 40,
						  in);
	case hwmon_curr_min:
		return ltc4282_write_voltage_byte(st, LTC4282_VSENSE_MIN, 40,
						  in);
	case hwmon_curr_reset_history:
		return ltc4282_curr_reset_hist(st);
	default:
		return -EOPNOTSUPP;
	}
}

static int ltc4282_energy_enable_set(struct ltc4282_state *st, long val)
{
	int ret;

	/* setting the bit halts the meter */
	ret = regmap_update_bits(st->map, LTC4282_ADC_CTRL,
				 LTC4282_METER_HALT_MASK,
				 FIELD_PREP(LTC4282_METER_HALT_MASK, !val));
	if (ret)
		return ret;

	st->energy_en = !!val;

	return 0;
}

static int ltc4282_write(struct device *dev,
			 enum hwmon_sensor_types type,
			 u32 attr, int channel, long val)
{
	struct ltc4282_state *st = dev_get_drvdata(dev);

	switch (type) {
	case hwmon_power:
		return ltc4282_write_power(st, attr, val);
	case hwmon_in:
		return ltc4282_write_in(st, attr, val, channel);
	case hwmon_curr:
		return ltc4282_write_curr(st, attr, val);
	case hwmon_energy:
		return ltc4282_energy_enable_set(st, val);
	default:
		return -EOPNOTSUPP;
	}
}

static umode_t ltc4282_in_is_visible(const struct ltc4282_state *st, u32 attr)
{
	switch (attr) {
	case hwmon_in_input:
	case hwmon_in_highest:
	case hwmon_in_lowest:
	case hwmon_in_max_alarm:
	case hwmon_in_min_alarm:
	case hwmon_in_label:
	case hwmon_in_lcrit_alarm:
	case hwmon_in_crit_alarm:
	case hwmon_in_fault:
		return 0444;
	case hwmon_in_max:
	case hwmon_in_min:
	case hwmon_in_enable:
		return 0644;
	case hwmon_in_reset_history:
		return 0200;
	default:
		return 0;
	}
}

static umode_t ltc4282_curr_is_visible(u32 attr)
{
	switch (attr) {
	case hwmon_curr_input:
	case hwmon_curr_highest:
	case hwmon_curr_lowest:
	case hwmon_curr_max_alarm:
	case hwmon_curr_min_alarm:
	case hwmon_curr_crit_alarm:
	case hwmon_curr_label:
		return 0444;
	case hwmon_curr_max:
	case hwmon_curr_min:
		return 0644;
	case hwmon_curr_reset_history:
		return 0200;
	default:
		return 0;
	}
}

static umode_t ltc4282_power_is_visible(u32 attr)
{
	switch (attr) {
	case hwmon_power_input:
	case hwmon_power_input_highest:
	case hwmon_power_input_lowest:
	case hwmon_power_label:
	case hwmon_power_max_alarm:
	case hwmon_power_min_alarm:
		return 0444;
	case hwmon_power_max:
	case hwmon_power_min:
		return 0644;
	case hwmon_power_reset_history:
		return 0200;
	default:
		return 0;
	}
}

static umode_t ltc4282_is_visible(const void *data,
				  enum hwmon_sensor_types type,
				  u32 attr, int channel)
{
	switch (type) {
	case hwmon_in:
		return ltc4282_in_is_visible(data, attr);
	case hwmon_curr:
		return ltc4282_curr_is_visible(attr);
	case hwmon_power:
		return ltc4282_power_is_visible(attr);
	case hwmon_energy:
		/* hwmon_energy_enable */
		return 0644;
	case hwmon_energy64:
		/* hwmon_energy_input */
		return 0444;
	default:
		return 0;
	}
}

static const char * const ltc4282_in_strs[] = {
	"VSOURCE", "VDD", "VGPIO"
};

static int ltc4282_read_labels(struct device *dev,
			       enum hwmon_sensor_types type,
			       u32 attr, int channel, const char **str)
{
	switch (type) {
	case hwmon_in:
		*str = ltc4282_in_strs[channel];
		return 0;
	case hwmon_curr:
		*str = "ISENSE";
		return 0;
	case hwmon_power:
		*str = "Power";
		return 0;
	default:
		return -EOPNOTSUPP;
	}
}

static const struct clk_ops ltc4282_ops = {
	.recalc_rate = ltc4282_recalc_rate,
	.determine_rate = ltc4282_determine_rate,
	.set_rate = ltc4282_set_rate,
	.disable = ltc4282_disable,
};

static int ltc428_clk_provider_setup(struct ltc4282_state *st,
				     struct device *dev)
{
	struct clk_init_data init;
	int ret;

	if (!IS_ENABLED(CONFIG_COMMON_CLK))
		return 0;

	init.name =  devm_kasprintf(dev, GFP_KERNEL, "%s-clk",
				    fwnode_get_name(dev_fwnode(dev)));
	if (!init.name)
		return -ENOMEM;

	init.ops = &ltc4282_ops;
	init.flags = CLK_GET_RATE_NOCACHE;
	st->clk_hw.init = &init;

	ret = devm_clk_hw_register(dev, &st->clk_hw);
	if (ret)
		return ret;

	return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
					   &st->clk_hw);
}

static int ltc428_clks_setup(struct ltc4282_state *st, struct device *dev)
{
	unsigned long rate;
	struct clk *clkin;
	u32 val;
	int ret;

	ret = ltc428_clk_provider_setup(st, dev);
	if (ret)
		return ret;

	clkin = devm_clk_get_optional_enabled(dev, NULL);
	if (IS_ERR(clkin))
		return dev_err_probe(dev, PTR_ERR(clkin),
				     "Failed to get clkin");
	if (!clkin)
		return 0;

	rate = clk_get_rate(clkin);
	if (!in_range(rate, LTC4282_CLKIN_MIN, LTC4282_CLKIN_RANGE))
		return dev_err_probe(dev, -EINVAL,
				     "Invalid clkin range(%lu) [%lu %lu]\n",
				     rate, LTC4282_CLKIN_MIN,
				     LTC4282_CLKIN_MAX);

	/*
	 * Clocks faster than 250KHZ should be reduced to 250KHZ. The clock
	 * frequency is divided by twice the value in the register.
	 */
	val = rate / (2 * LTC4282_CLKIN_MIN);

	return regmap_update_bits(st->map, LTC4282_CLK_DIV,
				  LTC4282_CLK_DIV_MASK,
				  FIELD_PREP(LTC4282_CLK_DIV_MASK, val));
}

static const int ltc4282_curr_lim_uv[] = {
	12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375
};

static int ltc4282_get_defaults(struct ltc4282_state *st, u32 *vin_mode)
{
	u32 reg_val, ilm_adjust;
	int ret;

	ret = regmap_read(st->map, LTC4282_ADC_CTRL, &reg_val);
	if (ret)
		return ret;

	st->energy_en = !FIELD_GET(LTC4282_METER_HALT_MASK, reg_val);

	ret = regmap_read(st->map, LTC4282_CTRL_MSB, &reg_val);
	if (ret)
		return ret;

	*vin_mode = FIELD_GET(LTC4282_CTRL_VIN_MODE_MASK, reg_val);

	ret = regmap_read(st->map, LTC4282_ILIM_ADJUST, &reg_val);
	if (ret)
		return ret;

	ilm_adjust = FIELD_GET(LTC4282_ILIM_ADJUST_MASK, reg_val);
	st->vsense_max = ltc4282_curr_lim_uv[ilm_adjust];

	st->in0_1_cache[LTC4282_CHAN_VSOURCE].en = FIELD_GET(LTC4282_VDD_MONITOR_MASK,
							     ilm_adjust);
	if (!st->in0_1_cache[LTC4282_CHAN_VSOURCE].en) {
		st->in0_1_cache[LTC4282_CHAN_VDD].en = true;
		return regmap_read(st->map, LTC4282_VSOURCE_MAX,
				   &st->in0_1_cache[LTC4282_CHAN_VSOURCE].in_max_raw);
	}

	return regmap_read(st->map, LTC4282_VSOURCE_MAX,
			   &st->in0_1_cache[LTC4282_CHAN_VDD].in_max_raw);
}

/*
 * Set max limits for ISENSE and Power as that depends on the max voltage on
 * rsense that is defined in ILIM_ADJUST. This is specially important for power
 * because for some rsense and vfsout values, if we allow the default raw 255
 * value, that would overflow long in 32bit archs when reading back the max
 * power limit.
 *
 * Also set meaningful historic values for VDD and VSOURCE
 * (0 would not mean much).
 */
static int ltc4282_set_max_limits(struct ltc4282_state *st)
{
	int ret;

	ret = ltc4282_write_voltage_byte(st, LTC4282_VSENSE_MAX, 40 * MILLI,
					 st->vsense_max);
	if (ret)
		return ret;

	/* Power is given by ISENSE * Vout. */
	st->power_max = DIV_ROUND_CLOSEST(st->vsense_max * DECA * MILLI, st->rsense) * st->vfs_out;
	ret = ltc4282_write_power_byte(st, LTC4282_POWER_MAX, st->power_max);
	if (ret)
		return ret;

	if (st->in0_1_cache[LTC4282_CHAN_VDD].en) {
		st->in0_1_cache[LTC4282_CHAN_VSOURCE].in_lowest = st->vfs_out;
		return __ltc4282_in_write_history(st, LTC4282_VSOURCE_LOWEST,
						  st->vdd, 0, st->vfs_out);
	}

	st->in0_1_cache[LTC4282_CHAN_VDD].in_lowest = st->vdd;
	return __ltc4282_in_write_history(st, LTC4282_VSOURCE_LOWEST,
					  st->vfs_out, 0, st->vfs_out);
}

static const char * const ltc4282_gpio1_modes[] = {
	"power_bad", "power_good"
};

static const char * const ltc4282_gpio2_modes[] = {
	"adc_input", "stress_fet"
};

static int ltc4282_gpio_setup(struct ltc4282_state *st, struct device *dev)
{
	const char *func = NULL;
	int ret;

	ret = device_property_read_string(dev, "adi,gpio1-mode", &func);
	if (!ret) {
		ret = match_string(ltc4282_gpio1_modes,
				   ARRAY_SIZE(ltc4282_gpio1_modes), func);
		if (ret < 0)
			return dev_err_probe(dev, ret,
					     "Invalid func(%s) for gpio1\n",
					     func);

		ret = regmap_update_bits(st->map, LTC4282_GPIO_CONFIG,
					 LTC4282_GPIO_1_CONFIG_MASK,
					 FIELD_PREP(LTC4282_GPIO_1_CONFIG_MASK, ret));
		if (ret)
			return ret;
	}

	ret = device_property_read_string(dev, "adi,gpio2-mode", &func);
	if (!ret) {
		ret = match_string(ltc4282_gpio2_modes,
				   ARRAY_SIZE(ltc4282_gpio2_modes), func);
		if (ret < 0)
			return dev_err_probe(dev, ret,
					     "Invalid func(%s) for gpio2\n",
					     func);
		if (!ret) {
			/* setting the bit to 1 so the ADC to monitors GPIO2 */
			ret = regmap_set_bits(st->map, LTC4282_ILIM_ADJUST,
					      LTC4282_GPIO_MODE_MASK);
		} else {
			ret = regmap_update_bits(st->map, LTC4282_GPIO_CONFIG,
						 LTC4282_GPIO_2_FET_STRESS_MASK,
						 FIELD_PREP(LTC4282_GPIO_2_FET_STRESS_MASK, 1));
		}

		if (ret)
			return ret;
	}

	if (!device_property_read_bool(dev, "adi,gpio3-monitor-enable"))
		return 0;

	if (func && !strcmp(func, "adc_input"))
		return dev_err_probe(dev, -EINVAL,
				     "Cannot have both gpio2 and gpio3 muxed into the ADC");

	return regmap_clear_bits(st->map, LTC4282_ILIM_ADJUST,
				 LTC4282_GPIO_MODE_MASK);
}

static const char * const ltc4282_dividers[] = {
	"external", "vdd_5_percent", "vdd_10_percent", "vdd_15_percent"
};

/* This maps the Vout full scale for the given Vin mode */
static const u16 ltc4282_vfs_milli[] = { 5540, 8320, 16640, 33280 };

static const u16 ltc4282_vdd_milli[] = { 3300, 5000, 12000, 24000 };

enum {
	LTC4282_VIN_3_3V,
	LTC4282_VIN_5V,
	LTC4282_VIN_12V,
	LTC4282_VIN_24V,
};

static int ltc4282_setup(struct ltc4282_state *st, struct device *dev)
{
	const char *divider;
	u32 val, vin_mode;
	int ret;

	/* The part has an eeprom so let's get the needed defaults from it */
	ret = ltc4282_get_defaults(st, &vin_mode);
	if (ret)
		return ret;

	/* default to 1 milli-ohm so we can probe without FW properties */
	st->rsense = 1 * (NANO / MILLI);
	ret = device_property_read_u32(dev, "adi,rsense-nano-ohms",
				       &st->rsense);
	if (!ret) {
		if (st->rsense < CENTI)
			return dev_err_probe(dev, -EINVAL,
					     "adi,rsense-nano-ohms too small (< %lu)\n",
					     CENTI);
	}

	/*
	 * The resolution for rsense is tenths of micro (eg: 62.5 uOhm) which
	 * means we need nano in the bindings. However, to make things easier to
	 * handle (with respect to overflows) we divide it by 100 as we don't
	 * really need the last two digits.
	 */
	st->rsense /= CENTI;

	val = vin_mode;
	ret = device_property_read_u32(dev, "adi,vin-mode-microvolt", &val);
	if (!ret) {
		switch (val) {
		case 3300000:
			val = LTC4282_VIN_3_3V;
			break;
		case 5000000:
			val = LTC4282_VIN_5V;
			break;
		case 12000000:
			val = LTC4282_VIN_12V;
			break;
		case 24000000:
			val = LTC4282_VIN_24V;
			break;
		default:
			return dev_err_probe(dev, -EINVAL,
					     "Invalid val(%u) for vin-mode-microvolt\n",
					     val);
		}

		ret = regmap_update_bits(st->map, LTC4282_CTRL_MSB,
					 LTC4282_CTRL_VIN_MODE_MASK,
					 FIELD_PREP(LTC4282_CTRL_VIN_MODE_MASK, val));
		if (ret)
			return ret;

		/* Foldback mode should also be set to the input voltage */
		ret = regmap_update_bits(st->map, LTC4282_ILIM_ADJUST,
					 LTC4282_FOLDBACK_MODE_MASK,
					 FIELD_PREP(LTC4282_FOLDBACK_MODE_MASK, val));
		if (ret)
			return ret;
	}

	st->vfs_out = ltc4282_vfs_milli[val];
	st->vdd = ltc4282_vdd_milli[val];

	ret = device_property_read_u32(dev, "adi,current-limit-sense-microvolt",
				       &st->vsense_max);
	if (!ret) {
		int reg_val;

		switch (val) {
		case 12500:
			reg_val = 0;
			break;
		case 15625:
			reg_val = 1;
			break;
		case 18750:
			reg_val = 2;
			break;
		case 21875:
			reg_val = 3;
			break;
		case 25000:
			reg_val = 4;
			break;
		case 28125:
			reg_val = 5;
			break;
		case 31250:
			reg_val = 6;
			break;
		case 34375:
			reg_val = 7;
			break;
		default:
			return dev_err_probe(dev, -EINVAL,
					     "Invalid val(%u) for adi,current-limit-microvolt\n",
					     st->vsense_max);
		}

		ret = regmap_update_bits(st->map, LTC4282_ILIM_ADJUST,
					 LTC4282_ILIM_ADJUST_MASK,
					 FIELD_PREP(LTC4282_ILIM_ADJUST_MASK, reg_val));
		if (ret)
			return ret;
	}

	ret = ltc4282_set_max_limits(st);
	if (ret)
		return ret;

	ret = device_property_read_string(dev, "adi,overvoltage-dividers",
					  &divider);
	if (!ret) {
		int div = match_string(ltc4282_dividers,
				       ARRAY_SIZE(ltc4282_dividers), divider);
		if (div < 0)
			return dev_err_probe(dev, -EINVAL,
					     "Invalid val(%s) for adi,overvoltage-divider\n",
					     divider);

		ret = regmap_update_bits(st->map, LTC4282_CTRL_MSB,
					 LTC4282_CTRL_OV_MODE_MASK,
					 FIELD_PREP(LTC4282_CTRL_OV_MODE_MASK, div));
	}

	ret = device_property_read_string(dev, "adi,undervoltage-dividers",
					  &divider);
	if (!ret) {
		int div = match_string(ltc4282_dividers,
				       ARRAY_SIZE(ltc4282_dividers), divider);
		if (div < 0)
			return dev_err_probe(dev, -EINVAL,
					     "Invalid val(%s) for adi,undervoltage-divider\n",
					     divider);

		ret = regmap_update_bits(st->map, LTC4282_CTRL_MSB,
					 LTC4282_CTRL_UV_MODE_MASK,
					 FIELD_PREP(LTC4282_CTRL_UV_MODE_MASK, div));
	}

	if (device_property_read_bool(dev, "adi,overcurrent-retry")) {
		ret = regmap_set_bits(st->map, LTC4282_CTRL_LSB,
				      LTC4282_CTRL_OC_RETRY_MASK);
		if (ret)
			return ret;
	}

	if (device_property_read_bool(dev, "adi,overvoltage-retry-disable")) {
		ret = regmap_clear_bits(st->map, LTC4282_CTRL_LSB,
					LTC4282_CTRL_OV_RETRY_MASK);
		if (ret)
			return ret;
	}

	if (device_property_read_bool(dev, "adi,undervoltage-retry-disable")) {
		ret = regmap_clear_bits(st->map, LTC4282_CTRL_LSB,
					LTC4282_CTRL_UV_RETRY_MASK);
		if (ret)
			return ret;
	}

	if (device_property_read_bool(dev, "adi,fault-log-enable")) {
		ret = regmap_set_bits(st->map, LTC4282_ADC_CTRL, LTC4282_FAULT_LOG_EN_MASK);
		if (ret)
			return ret;
	}

	ret = device_property_read_u32(dev, "adi,fet-bad-timeout-ms", &val);
	if (!ret) {
		if (val > LTC4282_FET_BAD_MAX_TIMEOUT)
			return dev_err_probe(dev, -EINVAL,
					     "Invalid value(%u) for adi,fet-bad-timeout-ms",
					     val);

		ret = regmap_write(st->map, LTC4282_FET_BAD_FAULT_TIMEOUT, val);
		if (ret)
			return ret;
	}

	return ltc4282_gpio_setup(st, dev);
}

static bool ltc4282_readable_reg(struct device *dev, unsigned int reg)
{
	if (reg == LTC4282_RESERVED_1 || reg == LTC4282_RESERVED_2)
		return false;

	return true;
}

static bool ltc4282_writable_reg(struct device *dev, unsigned int reg)
{
	if (reg == LTC4282_STATUS_LSB || reg == LTC4282_STATUS_MSB)
		return false;
	if (reg == LTC4282_RESERVED_1 || reg == LTC4282_RESERVED_2)
		return false;

	return true;
}

static const struct regmap_config ltc4282_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,
	.max_register = LTC4282_RESERVED_3,
	.readable_reg = ltc4282_readable_reg,
	.writeable_reg = ltc4282_writable_reg,
};

static const struct hwmon_channel_info * const ltc4282_info[] = {
	HWMON_CHANNEL_INFO(in,
			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST |
			   HWMON_I_MAX | HWMON_I_MIN | HWMON_I_MIN_ALARM |
			   HWMON_I_MAX_ALARM | HWMON_I_ENABLE |
			   HWMON_I_RESET_HISTORY | HWMON_I_FAULT |
			   HWMON_I_LABEL,
			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST |
			   HWMON_I_MAX | HWMON_I_MIN | HWMON_I_MIN_ALARM |
			   HWMON_I_MAX_ALARM | HWMON_I_LCRIT_ALARM |
			   HWMON_I_CRIT_ALARM | HWMON_I_ENABLE |
			   HWMON_I_RESET_HISTORY | HWMON_I_LABEL,
			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST |
			   HWMON_I_MAX | HWMON_I_MIN | HWMON_I_MIN_ALARM |
			   HWMON_I_RESET_HISTORY | HWMON_I_MAX_ALARM |
			   HWMON_I_LABEL),
	HWMON_CHANNEL_INFO(curr,
			   HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST |
			   HWMON_C_MAX | HWMON_C_MIN | HWMON_C_MIN_ALARM |
			   HWMON_C_MAX_ALARM | HWMON_C_CRIT_ALARM |
			   HWMON_C_RESET_HISTORY | HWMON_C_LABEL),
	HWMON_CHANNEL_INFO(power,
			   HWMON_P_INPUT | HWMON_P_INPUT_LOWEST |
			   HWMON_P_INPUT_HIGHEST | HWMON_P_MAX | HWMON_P_MIN |
			   HWMON_P_MAX_ALARM | HWMON_P_MIN_ALARM |
			   HWMON_P_RESET_HISTORY | HWMON_P_LABEL),
	HWMON_CHANNEL_INFO(energy,
			   HWMON_E_ENABLE),
	HWMON_CHANNEL_INFO(energy64,
			   HWMON_E_INPUT),
	NULL
};

static const struct hwmon_ops ltc4282_hwmon_ops = {
	.read = ltc4282_read,
	.write = ltc4282_write,
	.is_visible = ltc4282_is_visible,
	.read_string = ltc4282_read_labels,
};

static const struct hwmon_chip_info ltc4282_chip_info = {
	.ops = &ltc4282_hwmon_ops,
	.info = ltc4282_info,
};

static int ltc4282_show_fault_log(void *arg, u64 *val, u32 mask)
{
	struct ltc4282_state *st = arg;
	long alarm;
	int ret;

	ret = ltc4282_read_alarm(st, LTC4282_FAULT_LOG,	mask, &alarm);
	if (ret)
		return ret;

	*val = alarm;

	return 0;
}

static int ltc4282_show_curr1_crit_fault_log(void *arg, u64 *val)
{
	return ltc4282_show_fault_log(arg, val, LTC4282_OC_FAULT_MASK);
}
DEFINE_DEBUGFS_ATTRIBUTE(ltc4282_curr1_crit_fault_log,
			 ltc4282_show_curr1_crit_fault_log, NULL, "%llu\n");

static int ltc4282_show_in1_lcrit_fault_log(void *arg, u64 *val)
{
	return ltc4282_show_fault_log(arg, val, LTC4282_UV_FAULT_MASK);
}
DEFINE_DEBUGFS_ATTRIBUTE(ltc4282_in1_lcrit_fault_log,
			 ltc4282_show_in1_lcrit_fault_log, NULL, "%llu\n");

static int ltc4282_show_in1_crit_fault_log(void *arg, u64 *val)
{
	return ltc4282_show_fault_log(arg, val, LTC4282_OV_FAULT_MASK);
}
DEFINE_DEBUGFS_ATTRIBUTE(ltc4282_in1_crit_fault_log,
			 ltc4282_show_in1_crit_fault_log, NULL, "%llu\n");

static int ltc4282_show_fet_bad_fault_log(void *arg, u64 *val)
{
	return ltc4282_show_fault_log(arg, val, LTC4282_FET_BAD_FAULT_MASK);
}
DEFINE_DEBUGFS_ATTRIBUTE(ltc4282_fet_bad_fault_log,
			 ltc4282_show_fet_bad_fault_log, NULL, "%llu\n");

static int ltc4282_show_fet_short_fault_log(void *arg, u64 *val)
{
	return ltc4282_show_fault_log(arg, val, LTC4282_FET_SHORT_FAULT_MASK);
}
DEFINE_DEBUGFS_ATTRIBUTE(ltc4282_fet_short_fault_log,
			 ltc4282_show_fet_short_fault_log, NULL, "%llu\n");

static int ltc4282_show_power1_bad_fault_log(void *arg, u64 *val)
{
	return ltc4282_show_fault_log(arg, val, LTC4282_POWER_BAD_FAULT_MASK);
}
DEFINE_DEBUGFS_ATTRIBUTE(ltc4282_power1_bad_fault_log,
			 ltc4282_show_power1_bad_fault_log, NULL, "%llu\n");

static void ltc4282_debugfs_init(struct ltc4282_state *st, struct i2c_client *i2c)
{
	debugfs_create_file_unsafe("power1_bad_fault_log", 0400, i2c->debugfs, st,
				   &ltc4282_power1_bad_fault_log);
	debugfs_create_file_unsafe("in0_fet_short_fault_log", 0400, i2c->debugfs, st,
				   &ltc4282_fet_short_fault_log);
	debugfs_create_file_unsafe("in0_fet_bad_fault_log", 0400, i2c->debugfs, st,
				   &ltc4282_fet_bad_fault_log);
	debugfs_create_file_unsafe("in1_crit_fault_log", 0400, i2c->debugfs, st,
				   &ltc4282_in1_crit_fault_log);
	debugfs_create_file_unsafe("in1_lcrit_fault_log", 0400, i2c->debugfs, st,
				   &ltc4282_in1_lcrit_fault_log);
	debugfs_create_file_unsafe("curr1_crit_fault_log", 0400, i2c->debugfs, st,
				   &ltc4282_curr1_crit_fault_log);
}

static int ltc4282_probe(struct i2c_client *i2c)
{
	struct device *dev = &i2c->dev, *hwmon;
	struct ltc4282_state *st;
	int ret;

	st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
	if (!st)
		return -ENOMEM;

	st->map = devm_regmap_init_i2c(i2c, &ltc4282_regmap_config);
	if (IS_ERR(st->map))
		return dev_err_probe(dev, PTR_ERR(st->map),
				     "failed regmap init\n");

	/* Soft reset */
	ret = regmap_set_bits(st->map, LTC4282_ADC_CTRL, LTC4282_RESET_MASK);
	if (ret)
		return ret;

	/* Yes, it's big but it is as specified in the datasheet */
	msleep(3200);

	ret = ltc428_clks_setup(st, dev);
	if (ret)
		return ret;

	ret = ltc4282_setup(st, dev);
	if (ret)
		return ret;

	hwmon = devm_hwmon_device_register_with_info(dev, "ltc4282", st,
						     &ltc4282_chip_info, NULL);
	if (IS_ERR(hwmon))
		return PTR_ERR(hwmon);

	ltc4282_debugfs_init(st, i2c);

	return 0;
}

static const struct of_device_id ltc4282_of_match[] = {
	{ .compatible = "adi,ltc4282" },
	{}
};
MODULE_DEVICE_TABLE(of, ltc4282_of_match);

static struct i2c_driver ltc4282_driver = {
	.driver = {
		.name = "ltc4282",
		.of_match_table = ltc4282_of_match,
	},
	.probe = ltc4282_probe,
};
module_i2c_driver(ltc4282_driver);

MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
MODULE_DESCRIPTION("LTC4282 I2C High Current Hot Swap Controller");
MODULE_LICENSE("GPL");