| // SPDX-License-Identifier: GPL-2.0-only | |
| /* The industrial I/O core | |
| * | |
| * Copyright (c) 2008 Jonathan Cameron | |
| * | |
| * Handling of buffer allocation / resizing. | |
| * | |
| * Things to look at here. | |
| * - Better memory allocation techniques? | |
| * - Alternative access techniques? | |
| */ | |
| #include <linux/atomic.h> | |
| #include <linux/anon_inodes.h> | |
| #include <linux/cleanup.h> | |
| #include <linux/kernel.h> | |
| #include <linux/export.h> | |
| #include <linux/device.h> | |
| #include <linux/dma-buf.h> | |
| #include <linux/dma-fence.h> | |
| #include <linux/dma-resv.h> | |
| #include <linux/file.h> | |
| #include <linux/fs.h> | |
| #include <linux/cdev.h> | |
| #include <linux/slab.h> | |
| #include <linux/mm.h> | |
| #include <linux/poll.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/iio-opaque.h> | |
| #include "iio_core.h" | |
| #include "iio_core_trigger.h" | |
| #include <linux/iio/sysfs.h> | |
| #include <linux/iio/buffer.h> | |
| #include <linux/iio/buffer_impl.h> | |
| #define DMABUF_ENQUEUE_TIMEOUT_MS 5000 | |
| MODULE_IMPORT_NS("DMA_BUF"); | |
| struct iio_dmabuf_priv { | |
| struct list_head entry; | |
| struct kref ref; | |
| struct iio_buffer *buffer; | |
| struct iio_dma_buffer_block *block; | |
| u64 context; | |
| /* Spinlock used for locking the dma_fence */ | |
| spinlock_t lock; | |
| struct dma_buf_attachment *attach; | |
| struct sg_table *sgt; | |
| enum dma_data_direction dir; | |
| atomic_t seqno; | |
| }; | |
| struct iio_dma_fence { | |
| struct dma_fence base; | |
| struct iio_dmabuf_priv *priv; | |
| struct work_struct work; | |
| }; | |
| static const char * const iio_endian_prefix[] = { | |
| [IIO_BE] = "be", | |
| [IIO_LE] = "le", | |
| }; | |
| static bool iio_buffer_is_active(struct iio_buffer *buf) | |
| { | |
| return !list_empty(&buf->buffer_list); | |
| } | |
| static size_t iio_buffer_data_available(struct iio_buffer *buf) | |
| { | |
| return buf->access->data_available(buf); | |
| } | |
| static int iio_buffer_flush_hwfifo(struct iio_dev *indio_dev, | |
| struct iio_buffer *buf, size_t required) | |
| { | |
| if (!indio_dev->info->hwfifo_flush_to_buffer) | |
| return -ENODEV; | |
| return indio_dev->info->hwfifo_flush_to_buffer(indio_dev, required); | |
| } | |
| static bool iio_buffer_ready(struct iio_dev *indio_dev, struct iio_buffer *buf, | |
| size_t to_wait, int to_flush) | |
| { | |
| size_t avail; | |
| int flushed = 0; | |
| /* wakeup if the device was unregistered */ | |
| if (!indio_dev->info) | |
| return true; | |
| /* drain the buffer if it was disabled */ | |
| if (!iio_buffer_is_active(buf)) { | |
| to_wait = min_t(size_t, to_wait, 1); | |
| to_flush = 0; | |
| } | |
| avail = iio_buffer_data_available(buf); | |
| if (avail >= to_wait) { | |
| /* force a flush for non-blocking reads */ | |
| if (!to_wait && avail < to_flush) | |
| iio_buffer_flush_hwfifo(indio_dev, buf, | |
| to_flush - avail); | |
| return true; | |
| } | |
| if (to_flush) | |
| flushed = iio_buffer_flush_hwfifo(indio_dev, buf, | |
| to_wait - avail); | |
| if (flushed <= 0) | |
| return false; | |
| if (avail + flushed >= to_wait) | |
| return true; | |
| return false; | |
| } | |
| /** | |
| * iio_buffer_read() - chrdev read for buffer access | |
| * @filp: File structure pointer for the char device | |
| * @buf: Destination buffer for iio buffer read | |
| * @n: First n bytes to read | |
| * @f_ps: Long offset provided by the user as a seek position | |
| * | |
| * This function relies on all buffer implementations having an | |
| * iio_buffer as their first element. | |
| * | |
| * Return: negative values corresponding to error codes or ret != 0 | |
| * for ending the reading activity | |
| **/ | |
| static ssize_t iio_buffer_read(struct file *filp, char __user *buf, | |
| size_t n, loff_t *f_ps) | |
| { | |
| struct iio_dev_buffer_pair *ib = filp->private_data; | |
| struct iio_buffer *rb = ib->buffer; | |
| struct iio_dev *indio_dev = ib->indio_dev; | |
| DEFINE_WAIT_FUNC(wait, woken_wake_function); | |
| size_t datum_size; | |
| size_t to_wait; | |
| int ret = 0; | |
| if (!indio_dev->info) | |
| return -ENODEV; | |
| if (!rb || !rb->access->read) | |
| return -EINVAL; | |
| if (rb->direction != IIO_BUFFER_DIRECTION_IN) | |
| return -EPERM; | |
| datum_size = rb->bytes_per_datum; | |
| /* | |
| * If datum_size is 0 there will never be anything to read from the | |
| * buffer, so signal end of file now. | |
| */ | |
| if (!datum_size) | |
| return 0; | |
| if (filp->f_flags & O_NONBLOCK) | |
| to_wait = 0; | |
| else | |
| to_wait = min_t(size_t, n / datum_size, rb->watermark); | |
| add_wait_queue(&rb->pollq, &wait); | |
| do { | |
| if (!indio_dev->info) { | |
| ret = -ENODEV; | |
| break; | |
| } | |
| if (!iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size)) { | |
| if (signal_pending(current)) { | |
| ret = -ERESTARTSYS; | |
| break; | |
| } | |
| wait_woken(&wait, TASK_INTERRUPTIBLE, | |
| MAX_SCHEDULE_TIMEOUT); | |
| continue; | |
| } | |
| ret = rb->access->read(rb, n, buf); | |
| if (ret == 0 && (filp->f_flags & O_NONBLOCK)) | |
| ret = -EAGAIN; | |
| } while (ret == 0); | |
| remove_wait_queue(&rb->pollq, &wait); | |
| return ret; | |
| } | |
| static size_t iio_buffer_space_available(struct iio_buffer *buf) | |
| { | |
| if (buf->access->space_available) | |
| return buf->access->space_available(buf); | |
| return SIZE_MAX; | |
| } | |
| static ssize_t iio_buffer_write(struct file *filp, const char __user *buf, | |
| size_t n, loff_t *f_ps) | |
| { | |
| struct iio_dev_buffer_pair *ib = filp->private_data; | |
| struct iio_buffer *rb = ib->buffer; | |
| struct iio_dev *indio_dev = ib->indio_dev; | |
| DEFINE_WAIT_FUNC(wait, woken_wake_function); | |
| int ret = 0; | |
| size_t written; | |
| if (!indio_dev->info) | |
| return -ENODEV; | |
| if (!rb || !rb->access->write) | |
| return -EINVAL; | |
| if (rb->direction != IIO_BUFFER_DIRECTION_OUT) | |
| return -EPERM; | |
| written = 0; | |
| add_wait_queue(&rb->pollq, &wait); | |
| do { | |
| if (!indio_dev->info) { | |
| ret = -ENODEV; | |
| break; | |
| } | |
| if (!iio_buffer_space_available(rb)) { | |
| if (signal_pending(current)) { | |
| ret = -ERESTARTSYS; | |
| break; | |
| } | |
| if (filp->f_flags & O_NONBLOCK) { | |
| if (!written) | |
| ret = -EAGAIN; | |
| break; | |
| } | |
| wait_woken(&wait, TASK_INTERRUPTIBLE, | |
| MAX_SCHEDULE_TIMEOUT); | |
| continue; | |
| } | |
| ret = rb->access->write(rb, n - written, buf + written); | |
| if (ret < 0) | |
| break; | |
| written += ret; | |
| } while (written != n); | |
| remove_wait_queue(&rb->pollq, &wait); | |
| return ret < 0 ? ret : written; | |
| } | |
| /** | |
| * iio_buffer_poll() - poll the buffer to find out if it has data | |
| * @filp: File structure pointer for device access | |
| * @wait: Poll table structure pointer for which the driver adds | |
| * a wait queue | |
| * | |
| * Return: (EPOLLIN | EPOLLRDNORM) if data is available for reading | |
| * or 0 for other cases | |
| */ | |
| static __poll_t iio_buffer_poll(struct file *filp, | |
| struct poll_table_struct *wait) | |
| { | |
| struct iio_dev_buffer_pair *ib = filp->private_data; | |
| struct iio_buffer *rb = ib->buffer; | |
| struct iio_dev *indio_dev = ib->indio_dev; | |
| if (!indio_dev->info || !rb) | |
| return 0; | |
| poll_wait(filp, &rb->pollq, wait); | |
| switch (rb->direction) { | |
| case IIO_BUFFER_DIRECTION_IN: | |
| if (iio_buffer_ready(indio_dev, rb, rb->watermark, 0)) | |
| return EPOLLIN | EPOLLRDNORM; | |
| break; | |
| case IIO_BUFFER_DIRECTION_OUT: | |
| if (iio_buffer_space_available(rb)) | |
| return EPOLLOUT | EPOLLWRNORM; | |
| break; | |
| } | |
| return 0; | |
| } | |
| ssize_t iio_buffer_read_wrapper(struct file *filp, char __user *buf, | |
| size_t n, loff_t *f_ps) | |
| { | |
| struct iio_dev_buffer_pair *ib = filp->private_data; | |
| struct iio_buffer *rb = ib->buffer; | |
| /* check if buffer was opened through new API */ | |
| if (test_bit(IIO_BUSY_BIT_POS, &rb->flags)) | |
| return -EBUSY; | |
| return iio_buffer_read(filp, buf, n, f_ps); | |
| } | |
| ssize_t iio_buffer_write_wrapper(struct file *filp, const char __user *buf, | |
| size_t n, loff_t *f_ps) | |
| { | |
| struct iio_dev_buffer_pair *ib = filp->private_data; | |
| struct iio_buffer *rb = ib->buffer; | |
| /* check if buffer was opened through new API */ | |
| if (test_bit(IIO_BUSY_BIT_POS, &rb->flags)) | |
| return -EBUSY; | |
| return iio_buffer_write(filp, buf, n, f_ps); | |
| } | |
| __poll_t iio_buffer_poll_wrapper(struct file *filp, | |
| struct poll_table_struct *wait) | |
| { | |
| struct iio_dev_buffer_pair *ib = filp->private_data; | |
| struct iio_buffer *rb = ib->buffer; | |
| /* check if buffer was opened through new API */ | |
| if (test_bit(IIO_BUSY_BIT_POS, &rb->flags)) | |
| return 0; | |
| return iio_buffer_poll(filp, wait); | |
| } | |
| /** | |
| * iio_buffer_wakeup_poll - Wakes up the buffer waitqueue | |
| * @indio_dev: The IIO device | |
| * | |
| * Wakes up the event waitqueue used for poll(). Should usually | |
| * be called when the device is unregistered. | |
| */ | |
| void iio_buffer_wakeup_poll(struct iio_dev *indio_dev) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer; | |
| unsigned int i; | |
| for (i = 0; i < iio_dev_opaque->attached_buffers_cnt; i++) { | |
| buffer = iio_dev_opaque->attached_buffers[i]; | |
| wake_up(&buffer->pollq); | |
| } | |
| } | |
| int iio_pop_from_buffer(struct iio_buffer *buffer, void *data) | |
| { | |
| if (!buffer || !buffer->access || !buffer->access->remove_from) | |
| return -EINVAL; | |
| return buffer->access->remove_from(buffer, data); | |
| } | |
| EXPORT_SYMBOL_GPL(iio_pop_from_buffer); | |
| void iio_buffer_init(struct iio_buffer *buffer) | |
| { | |
| INIT_LIST_HEAD(&buffer->demux_list); | |
| INIT_LIST_HEAD(&buffer->buffer_list); | |
| INIT_LIST_HEAD(&buffer->dmabufs); | |
| mutex_init(&buffer->dmabufs_mutex); | |
| init_waitqueue_head(&buffer->pollq); | |
| kref_init(&buffer->ref); | |
| if (!buffer->watermark) | |
| buffer->watermark = 1; | |
| } | |
| EXPORT_SYMBOL(iio_buffer_init); | |
| void iio_device_detach_buffers(struct iio_dev *indio_dev) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer; | |
| unsigned int i; | |
| for (i = 0; i < iio_dev_opaque->attached_buffers_cnt; i++) { | |
| buffer = iio_dev_opaque->attached_buffers[i]; | |
| iio_buffer_put(buffer); | |
| } | |
| kfree(iio_dev_opaque->attached_buffers); | |
| } | |
| static ssize_t iio_show_scan_index(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sysfs_emit(buf, "%u\n", to_iio_dev_attr(attr)->c->scan_index); | |
| } | |
| static ssize_t iio_show_fixed_type(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); | |
| struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); | |
| const struct iio_scan_type *scan_type; | |
| u8 type; | |
| scan_type = iio_get_current_scan_type(indio_dev, this_attr->c); | |
| if (IS_ERR(scan_type)) | |
| return PTR_ERR(scan_type); | |
| type = scan_type->endianness; | |
| if (type == IIO_CPU) { | |
| #ifdef __LITTLE_ENDIAN | |
| type = IIO_LE; | |
| #else | |
| type = IIO_BE; | |
| #endif | |
| } | |
| if (scan_type->repeat > 1) | |
| return sysfs_emit(buf, "%s:%c%d/%dX%d>>%u\n", | |
| iio_endian_prefix[type], | |
| scan_type->sign, | |
| scan_type->realbits, | |
| scan_type->storagebits, | |
| scan_type->repeat, | |
| scan_type->shift); | |
| else | |
| return sysfs_emit(buf, "%s:%c%d/%d>>%u\n", | |
| iio_endian_prefix[type], | |
| scan_type->sign, | |
| scan_type->realbits, | |
| scan_type->storagebits, | |
| scan_type->shift); | |
| } | |
| static ssize_t iio_scan_el_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| int ret; | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| /* Ensure ret is 0 or 1. */ | |
| ret = !!test_bit(to_iio_dev_attr(attr)->address, | |
| buffer->scan_mask); | |
| return sysfs_emit(buf, "%d\n", ret); | |
| } | |
| /* Note NULL used as error indicator as it doesn't make sense. */ | |
| static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks, | |
| unsigned int masklength, | |
| const unsigned long *mask, | |
| bool strict) | |
| { | |
| if (bitmap_empty(mask, masklength)) | |
| return NULL; | |
| /* | |
| * The condition here do not handle multi-long masks correctly. | |
| * It only checks the first long to be zero, and will use such mask | |
| * as a terminator even if there was bits set after the first long. | |
| * | |
| * Correct check would require using: | |
| * while (!bitmap_empty(av_masks, masklength)) | |
| * instead. This is potentially hazardous because the | |
| * avaliable_scan_masks is a zero terminated array of longs - and | |
| * using the proper bitmap_empty() check for multi-long wide masks | |
| * would require the array to be terminated with multiple zero longs - | |
| * which is not such an usual pattern. | |
| * | |
| * As writing of this no multi-long wide masks were found in-tree, so | |
| * the simple while (*av_masks) check is working. | |
| */ | |
| while (*av_masks) { | |
| if (strict) { | |
| if (bitmap_equal(mask, av_masks, masklength)) | |
| return av_masks; | |
| } else { | |
| if (bitmap_subset(mask, av_masks, masklength)) | |
| return av_masks; | |
| } | |
| av_masks += BITS_TO_LONGS(masklength); | |
| } | |
| return NULL; | |
| } | |
| static bool iio_validate_scan_mask(struct iio_dev *indio_dev, | |
| const unsigned long *mask) | |
| { | |
| if (!indio_dev->setup_ops->validate_scan_mask) | |
| return true; | |
| return indio_dev->setup_ops->validate_scan_mask(indio_dev, mask); | |
| } | |
| /** | |
| * iio_scan_mask_set() - set particular bit in the scan mask | |
| * @indio_dev: the iio device | |
| * @buffer: the buffer whose scan mask we are interested in | |
| * @bit: the bit to be set. | |
| * | |
| * Note that at this point we have no way of knowing what other | |
| * buffers might request, hence this code only verifies that the | |
| * individual buffers request is plausible. | |
| */ | |
| static int iio_scan_mask_set(struct iio_dev *indio_dev, | |
| struct iio_buffer *buffer, int bit) | |
| { | |
| unsigned int masklength = iio_get_masklength(indio_dev); | |
| const unsigned long *mask; | |
| unsigned long *trialmask; | |
| if (!masklength) { | |
| WARN(1, "Trying to set scanmask prior to registering buffer\n"); | |
| return -EINVAL; | |
| } | |
| trialmask = bitmap_alloc(masklength, GFP_KERNEL); | |
| if (!trialmask) | |
| return -ENOMEM; | |
| bitmap_copy(trialmask, buffer->scan_mask, masklength); | |
| set_bit(bit, trialmask); | |
| if (!iio_validate_scan_mask(indio_dev, trialmask)) | |
| goto err_invalid_mask; | |
| if (indio_dev->available_scan_masks) { | |
| mask = iio_scan_mask_match(indio_dev->available_scan_masks, | |
| masklength, trialmask, false); | |
| if (!mask) | |
| goto err_invalid_mask; | |
| } | |
| bitmap_copy(buffer->scan_mask, trialmask, masklength); | |
| bitmap_free(trialmask); | |
| return 0; | |
| err_invalid_mask: | |
| bitmap_free(trialmask); | |
| return -EINVAL; | |
| } | |
| static int iio_scan_mask_clear(struct iio_buffer *buffer, int bit) | |
| { | |
| clear_bit(bit, buffer->scan_mask); | |
| return 0; | |
| } | |
| static int iio_scan_mask_query(struct iio_dev *indio_dev, | |
| struct iio_buffer *buffer, int bit) | |
| { | |
| if (bit > iio_get_masklength(indio_dev)) | |
| return -EINVAL; | |
| if (!buffer->scan_mask) | |
| return 0; | |
| /* Ensure return value is 0 or 1. */ | |
| return !!test_bit(bit, buffer->scan_mask); | |
| }; | |
| static ssize_t iio_scan_el_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, | |
| size_t len) | |
| { | |
| int ret; | |
| bool state; | |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); | |
| struct iio_buffer *buffer = this_attr->buffer; | |
| ret = kstrtobool(buf, &state); | |
| if (ret < 0) | |
| return ret; | |
| guard(mutex)(&iio_dev_opaque->mlock); | |
| if (iio_buffer_is_active(buffer)) | |
| return -EBUSY; | |
| ret = iio_scan_mask_query(indio_dev, buffer, this_attr->address); | |
| if (ret < 0) | |
| return ret; | |
| if (state && ret) | |
| return len; | |
| if (state) | |
| ret = iio_scan_mask_set(indio_dev, buffer, this_attr->address); | |
| else | |
| ret = iio_scan_mask_clear(buffer, this_attr->address); | |
| if (ret) | |
| return ret; | |
| return len; | |
| } | |
| static ssize_t iio_scan_el_ts_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| return sysfs_emit(buf, "%d\n", buffer->scan_timestamp); | |
| } | |
| static ssize_t iio_scan_el_ts_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, | |
| size_t len) | |
| { | |
| int ret; | |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| bool state; | |
| ret = kstrtobool(buf, &state); | |
| if (ret < 0) | |
| return ret; | |
| guard(mutex)(&iio_dev_opaque->mlock); | |
| if (iio_buffer_is_active(buffer)) | |
| return -EBUSY; | |
| buffer->scan_timestamp = state; | |
| return len; | |
| } | |
| static int iio_buffer_add_channel_sysfs(struct iio_dev *indio_dev, | |
| struct iio_buffer *buffer, | |
| const struct iio_chan_spec *chan) | |
| { | |
| int ret, attrcount = 0; | |
| ret = __iio_add_chan_devattr("index", | |
| chan, | |
| &iio_show_scan_index, | |
| NULL, | |
| 0, | |
| IIO_SEPARATE, | |
| &indio_dev->dev, | |
| buffer, | |
| &buffer->buffer_attr_list); | |
| if (ret) | |
| return ret; | |
| attrcount++; | |
| ret = __iio_add_chan_devattr("type", | |
| chan, | |
| &iio_show_fixed_type, | |
| NULL, | |
| 0, | |
| IIO_SEPARATE, | |
| &indio_dev->dev, | |
| buffer, | |
| &buffer->buffer_attr_list); | |
| if (ret) | |
| return ret; | |
| attrcount++; | |
| if (chan->type != IIO_TIMESTAMP) | |
| ret = __iio_add_chan_devattr("en", | |
| chan, | |
| &iio_scan_el_show, | |
| &iio_scan_el_store, | |
| chan->scan_index, | |
| IIO_SEPARATE, | |
| &indio_dev->dev, | |
| buffer, | |
| &buffer->buffer_attr_list); | |
| else | |
| ret = __iio_add_chan_devattr("en", | |
| chan, | |
| &iio_scan_el_ts_show, | |
| &iio_scan_el_ts_store, | |
| chan->scan_index, | |
| IIO_SEPARATE, | |
| &indio_dev->dev, | |
| buffer, | |
| &buffer->buffer_attr_list); | |
| if (ret) | |
| return ret; | |
| attrcount++; | |
| ret = attrcount; | |
| return ret; | |
| } | |
| static ssize_t length_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| return sysfs_emit(buf, "%d\n", buffer->length); | |
| } | |
| static ssize_t length_store(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t len) | |
| { | |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| unsigned int val; | |
| int ret; | |
| ret = kstrtouint(buf, 10, &val); | |
| if (ret) | |
| return ret; | |
| if (val == buffer->length) | |
| return len; | |
| guard(mutex)(&iio_dev_opaque->mlock); | |
| if (iio_buffer_is_active(buffer)) | |
| return -EBUSY; | |
| buffer->access->set_length(buffer, val); | |
| if (buffer->length && buffer->length < buffer->watermark) | |
| buffer->watermark = buffer->length; | |
| return len; | |
| } | |
| static ssize_t enable_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| return sysfs_emit(buf, "%d\n", iio_buffer_is_active(buffer)); | |
| } | |
| static int iio_storage_bytes_for_si(struct iio_dev *indio_dev, | |
| unsigned int scan_index) | |
| { | |
| const struct iio_chan_spec *ch; | |
| const struct iio_scan_type *scan_type; | |
| unsigned int bytes; | |
| ch = iio_find_channel_from_si(indio_dev, scan_index); | |
| scan_type = iio_get_current_scan_type(indio_dev, ch); | |
| if (IS_ERR(scan_type)) | |
| return PTR_ERR(scan_type); | |
| bytes = scan_type->storagebits / 8; | |
| if (scan_type->repeat > 1) | |
| bytes *= roundup_pow_of_two(scan_type->repeat); | |
| return bytes; | |
| } | |
| static int iio_storage_bytes_for_timestamp(struct iio_dev *indio_dev) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| return iio_storage_bytes_for_si(indio_dev, | |
| iio_dev_opaque->scan_index_timestamp); | |
| } | |
| static int iio_compute_scan_bytes(struct iio_dev *indio_dev, | |
| const unsigned long *mask, bool timestamp, | |
| unsigned int *scan_bytes, | |
| unsigned int *timestamp_offset) | |
| { | |
| unsigned int bytes = 0; | |
| int length, i, largest = 0; | |
| /* How much space will the demuxed element take? */ | |
| for_each_set_bit(i, mask, iio_get_masklength(indio_dev)) { | |
| length = iio_storage_bytes_for_si(indio_dev, i); | |
| if (length < 0) | |
| return length; | |
| bytes = ALIGN(bytes, length); | |
| bytes += length; | |
| largest = max(largest, length); | |
| } | |
| if (timestamp) { | |
| length = iio_storage_bytes_for_timestamp(indio_dev); | |
| if (length < 0) | |
| return length; | |
| bytes = ALIGN(bytes, length); | |
| if (timestamp_offset) | |
| *timestamp_offset = bytes; | |
| bytes += length; | |
| largest = max(largest, length); | |
| } | |
| *scan_bytes = ALIGN(bytes, largest); | |
| return 0; | |
| } | |
| static void iio_buffer_activate(struct iio_dev *indio_dev, | |
| struct iio_buffer *buffer) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| iio_buffer_get(buffer); | |
| list_add(&buffer->buffer_list, &iio_dev_opaque->buffer_list); | |
| } | |
| static void iio_buffer_deactivate(struct iio_buffer *buffer) | |
| { | |
| list_del_init(&buffer->buffer_list); | |
| wake_up_interruptible(&buffer->pollq); | |
| iio_buffer_put(buffer); | |
| } | |
| static void iio_buffer_deactivate_all(struct iio_dev *indio_dev) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer, *_buffer; | |
| list_for_each_entry_safe(buffer, _buffer, | |
| &iio_dev_opaque->buffer_list, buffer_list) | |
| iio_buffer_deactivate(buffer); | |
| } | |
| static int iio_buffer_enable(struct iio_buffer *buffer, | |
| struct iio_dev *indio_dev) | |
| { | |
| if (!buffer->access->enable) | |
| return 0; | |
| return buffer->access->enable(buffer, indio_dev); | |
| } | |
| static int iio_buffer_disable(struct iio_buffer *buffer, | |
| struct iio_dev *indio_dev) | |
| { | |
| if (!buffer->access->disable) | |
| return 0; | |
| return buffer->access->disable(buffer, indio_dev); | |
| } | |
| static int iio_buffer_update_bytes_per_datum(struct iio_dev *indio_dev, | |
| struct iio_buffer *buffer) | |
| { | |
| unsigned int bytes; | |
| int ret; | |
| if (!buffer->access->set_bytes_per_datum) | |
| return 0; | |
| ret = iio_compute_scan_bytes(indio_dev, buffer->scan_mask, | |
| buffer->scan_timestamp, &bytes, NULL); | |
| if (ret) | |
| return ret; | |
| buffer->access->set_bytes_per_datum(buffer, bytes); | |
| return 0; | |
| } | |
| static int iio_buffer_request_update(struct iio_dev *indio_dev, | |
| struct iio_buffer *buffer) | |
| { | |
| int ret; | |
| ret = iio_buffer_update_bytes_per_datum(indio_dev, buffer); | |
| if (ret) | |
| return ret; | |
| if (buffer->access->request_update) { | |
| ret = buffer->access->request_update(buffer); | |
| if (ret) { | |
| dev_dbg(&indio_dev->dev, | |
| "Buffer not started: buffer parameter update failed (%d)\n", | |
| ret); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void iio_free_scan_mask(struct iio_dev *indio_dev, | |
| const unsigned long *mask) | |
| { | |
| /* If the mask is dynamically allocated free it, otherwise do nothing */ | |
| if (!indio_dev->available_scan_masks) | |
| bitmap_free(mask); | |
| } | |
| struct iio_device_config { | |
| unsigned int mode; | |
| unsigned int watermark; | |
| const unsigned long *scan_mask; | |
| unsigned int scan_bytes; | |
| unsigned int scan_timestamp_offset; | |
| bool scan_timestamp; | |
| }; | |
| static int iio_verify_update(struct iio_dev *indio_dev, | |
| struct iio_buffer *insert_buffer, | |
| struct iio_buffer *remove_buffer, | |
| struct iio_device_config *config) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| unsigned int masklength = iio_get_masklength(indio_dev); | |
| unsigned long *compound_mask; | |
| const unsigned long *scan_mask; | |
| bool strict_scanmask = false; | |
| struct iio_buffer *buffer; | |
| bool scan_timestamp; | |
| unsigned int modes; | |
| int ret; | |
| if (insert_buffer && | |
| bitmap_empty(insert_buffer->scan_mask, masklength)) { | |
| dev_dbg(&indio_dev->dev, | |
| "At least one scan element must be enabled first\n"); | |
| return -EINVAL; | |
| } | |
| memset(config, 0, sizeof(*config)); | |
| config->watermark = ~0; | |
| /* | |
| * If there is just one buffer and we are removing it there is nothing | |
| * to verify. | |
| */ | |
| if (remove_buffer && !insert_buffer && | |
| list_is_singular(&iio_dev_opaque->buffer_list)) | |
| return 0; | |
| modes = indio_dev->modes; | |
| list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | |
| if (buffer == remove_buffer) | |
| continue; | |
| modes &= buffer->access->modes; | |
| config->watermark = min(config->watermark, buffer->watermark); | |
| } | |
| if (insert_buffer) { | |
| modes &= insert_buffer->access->modes; | |
| config->watermark = min(config->watermark, | |
| insert_buffer->watermark); | |
| } | |
| /* Definitely possible for devices to support both of these. */ | |
| if ((modes & INDIO_BUFFER_TRIGGERED) && indio_dev->trig) { | |
| config->mode = INDIO_BUFFER_TRIGGERED; | |
| } else if (modes & INDIO_BUFFER_HARDWARE) { | |
| /* | |
| * Keep things simple for now and only allow a single buffer to | |
| * be connected in hardware mode. | |
| */ | |
| if (insert_buffer && !list_empty(&iio_dev_opaque->buffer_list)) | |
| return -EINVAL; | |
| config->mode = INDIO_BUFFER_HARDWARE; | |
| strict_scanmask = true; | |
| } else if (modes & INDIO_BUFFER_SOFTWARE) { | |
| config->mode = INDIO_BUFFER_SOFTWARE; | |
| } else { | |
| /* Can only occur on first buffer */ | |
| if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) | |
| dev_dbg(&indio_dev->dev, "Buffer not started: no trigger\n"); | |
| return -EINVAL; | |
| } | |
| /* What scan mask do we actually have? */ | |
| compound_mask = bitmap_zalloc(masklength, GFP_KERNEL); | |
| if (!compound_mask) | |
| return -ENOMEM; | |
| scan_timestamp = false; | |
| list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | |
| if (buffer == remove_buffer) | |
| continue; | |
| bitmap_or(compound_mask, compound_mask, buffer->scan_mask, | |
| masklength); | |
| scan_timestamp |= buffer->scan_timestamp; | |
| } | |
| if (insert_buffer) { | |
| bitmap_or(compound_mask, compound_mask, | |
| insert_buffer->scan_mask, masklength); | |
| scan_timestamp |= insert_buffer->scan_timestamp; | |
| } | |
| if (indio_dev->available_scan_masks) { | |
| scan_mask = iio_scan_mask_match(indio_dev->available_scan_masks, | |
| masklength, compound_mask, | |
| strict_scanmask); | |
| bitmap_free(compound_mask); | |
| if (!scan_mask) | |
| return -EINVAL; | |
| } else { | |
| scan_mask = compound_mask; | |
| } | |
| ret = iio_compute_scan_bytes(indio_dev, scan_mask, scan_timestamp, | |
| &config->scan_bytes, | |
| &config->scan_timestamp_offset); | |
| if (ret) | |
| return ret; | |
| config->scan_mask = scan_mask; | |
| config->scan_timestamp = scan_timestamp; | |
| return 0; | |
| } | |
| /** | |
| * struct iio_demux_table - table describing demux memcpy ops | |
| * @from: index to copy from | |
| * @to: index to copy to | |
| * @length: how many bytes to copy | |
| * @l: list head used for management | |
| */ | |
| struct iio_demux_table { | |
| unsigned int from; | |
| unsigned int to; | |
| unsigned int length; | |
| struct list_head l; | |
| }; | |
| static void iio_buffer_demux_free(struct iio_buffer *buffer) | |
| { | |
| struct iio_demux_table *p, *q; | |
| list_for_each_entry_safe(p, q, &buffer->demux_list, l) { | |
| list_del(&p->l); | |
| kfree(p); | |
| } | |
| } | |
| static int iio_buffer_add_demux(struct iio_buffer *buffer, | |
| struct iio_demux_table **p, unsigned int in_loc, | |
| unsigned int out_loc, | |
| unsigned int length) | |
| { | |
| if (*p && (*p)->from + (*p)->length == in_loc && | |
| (*p)->to + (*p)->length == out_loc) { | |
| (*p)->length += length; | |
| } else { | |
| *p = kmalloc_obj(**p); | |
| if (!(*p)) | |
| return -ENOMEM; | |
| (*p)->from = in_loc; | |
| (*p)->to = out_loc; | |
| (*p)->length = length; | |
| list_add_tail(&(*p)->l, &buffer->demux_list); | |
| } | |
| return 0; | |
| } | |
| static int iio_buffer_update_demux(struct iio_dev *indio_dev, | |
| struct iio_buffer *buffer) | |
| { | |
| unsigned int masklength = iio_get_masklength(indio_dev); | |
| int ret, in_ind = -1, out_ind, length; | |
| unsigned int in_loc = 0, out_loc = 0; | |
| struct iio_demux_table *p = NULL; | |
| /* Clear out any old demux */ | |
| iio_buffer_demux_free(buffer); | |
| kfree(buffer->demux_bounce); | |
| buffer->demux_bounce = NULL; | |
| /* First work out which scan mode we will actually have */ | |
| if (bitmap_equal(indio_dev->active_scan_mask, | |
| buffer->scan_mask, masklength)) | |
| return 0; | |
| /* Now we have the two masks, work from least sig and build up sizes */ | |
| for_each_set_bit(out_ind, buffer->scan_mask, masklength) { | |
| in_ind = find_next_bit(indio_dev->active_scan_mask, | |
| masklength, in_ind + 1); | |
| while (in_ind != out_ind) { | |
| ret = iio_storage_bytes_for_si(indio_dev, in_ind); | |
| if (ret < 0) | |
| goto error_clear_mux_table; | |
| length = ret; | |
| /* Make sure we are aligned */ | |
| in_loc = roundup(in_loc, length) + length; | |
| in_ind = find_next_bit(indio_dev->active_scan_mask, | |
| masklength, in_ind + 1); | |
| } | |
| ret = iio_storage_bytes_for_si(indio_dev, in_ind); | |
| if (ret < 0) | |
| goto error_clear_mux_table; | |
| length = ret; | |
| out_loc = roundup(out_loc, length); | |
| in_loc = roundup(in_loc, length); | |
| ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length); | |
| if (ret) | |
| goto error_clear_mux_table; | |
| out_loc += length; | |
| in_loc += length; | |
| } | |
| /* Relies on scan_timestamp being last */ | |
| if (buffer->scan_timestamp) { | |
| ret = iio_storage_bytes_for_timestamp(indio_dev); | |
| if (ret < 0) | |
| goto error_clear_mux_table; | |
| length = ret; | |
| out_loc = roundup(out_loc, length); | |
| in_loc = roundup(in_loc, length); | |
| ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length); | |
| if (ret) | |
| goto error_clear_mux_table; | |
| out_loc += length; | |
| } | |
| buffer->demux_bounce = kzalloc(out_loc, GFP_KERNEL); | |
| if (!buffer->demux_bounce) { | |
| ret = -ENOMEM; | |
| goto error_clear_mux_table; | |
| } | |
| return 0; | |
| error_clear_mux_table: | |
| iio_buffer_demux_free(buffer); | |
| return ret; | |
| } | |
| static int iio_update_demux(struct iio_dev *indio_dev) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer; | |
| int ret; | |
| list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | |
| ret = iio_buffer_update_demux(indio_dev, buffer); | |
| if (ret < 0) | |
| goto error_clear_mux_table; | |
| } | |
| return 0; | |
| error_clear_mux_table: | |
| list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) | |
| iio_buffer_demux_free(buffer); | |
| return ret; | |
| } | |
| static int iio_enable_buffers(struct iio_dev *indio_dev, | |
| struct iio_device_config *config) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer, *tmp = NULL; | |
| int ret; | |
| indio_dev->active_scan_mask = config->scan_mask; | |
| ACCESS_PRIVATE(indio_dev, scan_timestamp) = config->scan_timestamp; | |
| indio_dev->scan_bytes = config->scan_bytes; | |
| ACCESS_PRIVATE(indio_dev, scan_timestamp_offset) = config->scan_timestamp_offset; | |
| iio_dev_opaque->currentmode = config->mode; | |
| iio_update_demux(indio_dev); | |
| /* Wind up again */ | |
| if (indio_dev->setup_ops->preenable) { | |
| ret = indio_dev->setup_ops->preenable(indio_dev); | |
| if (ret) { | |
| dev_dbg(&indio_dev->dev, | |
| "Buffer not started: buffer preenable failed (%d)\n", ret); | |
| goto err_undo_config; | |
| } | |
| } | |
| if (indio_dev->info->update_scan_mode) { | |
| ret = indio_dev->info | |
| ->update_scan_mode(indio_dev, | |
| indio_dev->active_scan_mask); | |
| if (ret < 0) { | |
| dev_dbg(&indio_dev->dev, | |
| "Buffer not started: update scan mode failed (%d)\n", | |
| ret); | |
| goto err_run_postdisable; | |
| } | |
| } | |
| if (indio_dev->info->hwfifo_set_watermark) | |
| indio_dev->info->hwfifo_set_watermark(indio_dev, | |
| config->watermark); | |
| list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | |
| ret = iio_buffer_enable(buffer, indio_dev); | |
| if (ret) { | |
| tmp = buffer; | |
| goto err_disable_buffers; | |
| } | |
| } | |
| if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED) { | |
| ret = iio_trigger_attach_poll_func(indio_dev->trig, | |
| indio_dev->pollfunc); | |
| if (ret) | |
| goto err_disable_buffers; | |
| } | |
| if (indio_dev->setup_ops->postenable) { | |
| ret = indio_dev->setup_ops->postenable(indio_dev); | |
| if (ret) { | |
| dev_dbg(&indio_dev->dev, | |
| "Buffer not started: postenable failed (%d)\n", ret); | |
| goto err_detach_pollfunc; | |
| } | |
| } | |
| return 0; | |
| err_detach_pollfunc: | |
| if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED) { | |
| iio_trigger_detach_poll_func(indio_dev->trig, | |
| indio_dev->pollfunc); | |
| } | |
| err_disable_buffers: | |
| buffer = list_prepare_entry(tmp, &iio_dev_opaque->buffer_list, buffer_list); | |
| list_for_each_entry_continue_reverse(buffer, &iio_dev_opaque->buffer_list, | |
| buffer_list) | |
| iio_buffer_disable(buffer, indio_dev); | |
| err_run_postdisable: | |
| if (indio_dev->setup_ops->postdisable) | |
| indio_dev->setup_ops->postdisable(indio_dev); | |
| err_undo_config: | |
| iio_dev_opaque->currentmode = INDIO_DIRECT_MODE; | |
| indio_dev->active_scan_mask = NULL; | |
| return ret; | |
| } | |
| static int iio_disable_buffers(struct iio_dev *indio_dev) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer; | |
| int ret = 0; | |
| int ret2; | |
| /* Wind down existing buffers - iff there are any */ | |
| if (list_empty(&iio_dev_opaque->buffer_list)) | |
| return 0; | |
| /* | |
| * If things go wrong at some step in disable we still need to continue | |
| * to perform the other steps, otherwise we leave the device in a | |
| * inconsistent state. We return the error code for the first error we | |
| * encountered. | |
| */ | |
| if (indio_dev->setup_ops->predisable) { | |
| ret2 = indio_dev->setup_ops->predisable(indio_dev); | |
| if (ret2 && !ret) | |
| ret = ret2; | |
| } | |
| if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED) { | |
| iio_trigger_detach_poll_func(indio_dev->trig, | |
| indio_dev->pollfunc); | |
| } | |
| list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | |
| ret2 = iio_buffer_disable(buffer, indio_dev); | |
| if (ret2 && !ret) | |
| ret = ret2; | |
| } | |
| if (indio_dev->setup_ops->postdisable) { | |
| ret2 = indio_dev->setup_ops->postdisable(indio_dev); | |
| if (ret2 && !ret) | |
| ret = ret2; | |
| } | |
| iio_free_scan_mask(indio_dev, indio_dev->active_scan_mask); | |
| indio_dev->active_scan_mask = NULL; | |
| iio_dev_opaque->currentmode = INDIO_DIRECT_MODE; | |
| return ret; | |
| } | |
| static int __iio_update_buffers(struct iio_dev *indio_dev, | |
| struct iio_buffer *insert_buffer, | |
| struct iio_buffer *remove_buffer) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_device_config new_config; | |
| int ret; | |
| ret = iio_verify_update(indio_dev, insert_buffer, remove_buffer, | |
| &new_config); | |
| if (ret) | |
| return ret; | |
| if (insert_buffer) { | |
| ret = iio_buffer_request_update(indio_dev, insert_buffer); | |
| if (ret) | |
| goto err_free_config; | |
| } | |
| ret = iio_disable_buffers(indio_dev); | |
| if (ret) | |
| goto err_deactivate_all; | |
| if (remove_buffer) | |
| iio_buffer_deactivate(remove_buffer); | |
| if (insert_buffer) | |
| iio_buffer_activate(indio_dev, insert_buffer); | |
| /* If no buffers in list, we are done */ | |
| if (list_empty(&iio_dev_opaque->buffer_list)) | |
| return 0; | |
| ret = iio_enable_buffers(indio_dev, &new_config); | |
| if (ret) | |
| goto err_deactivate_all; | |
| return 0; | |
| err_deactivate_all: | |
| /* | |
| * We've already verified that the config is valid earlier. If things go | |
| * wrong in either enable or disable the most likely reason is an IO | |
| * error from the device. In this case there is no good recovery | |
| * strategy. Just make sure to disable everything and leave the device | |
| * in a sane state. With a bit of luck the device might come back to | |
| * life again later and userspace can try again. | |
| */ | |
| iio_buffer_deactivate_all(indio_dev); | |
| err_free_config: | |
| iio_free_scan_mask(indio_dev, new_config.scan_mask); | |
| return ret; | |
| } | |
| int iio_update_buffers(struct iio_dev *indio_dev, | |
| struct iio_buffer *insert_buffer, | |
| struct iio_buffer *remove_buffer) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| if (insert_buffer == remove_buffer) | |
| return 0; | |
| if (insert_buffer && | |
| insert_buffer->direction == IIO_BUFFER_DIRECTION_OUT) | |
| return -EINVAL; | |
| guard(mutex)(&iio_dev_opaque->info_exist_lock); | |
| guard(mutex)(&iio_dev_opaque->mlock); | |
| if (insert_buffer && iio_buffer_is_active(insert_buffer)) | |
| insert_buffer = NULL; | |
| if (remove_buffer && !iio_buffer_is_active(remove_buffer)) | |
| remove_buffer = NULL; | |
| if (!insert_buffer && !remove_buffer) | |
| return 0; | |
| if (!indio_dev->info) | |
| return -ENODEV; | |
| return __iio_update_buffers(indio_dev, insert_buffer, remove_buffer); | |
| } | |
| EXPORT_SYMBOL_GPL(iio_update_buffers); | |
| void iio_disable_all_buffers(struct iio_dev *indio_dev) | |
| { | |
| iio_disable_buffers(indio_dev); | |
| iio_buffer_deactivate_all(indio_dev); | |
| } | |
| static ssize_t enable_store(struct device *dev, struct device_attribute *attr, | |
| const char *buf, size_t len) | |
| { | |
| int ret; | |
| bool requested_state; | |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| bool inlist; | |
| ret = kstrtobool(buf, &requested_state); | |
| if (ret < 0) | |
| return ret; | |
| guard(mutex)(&iio_dev_opaque->mlock); | |
| /* Find out if it is in the list */ | |
| inlist = iio_buffer_is_active(buffer); | |
| /* Already in desired state */ | |
| if (inlist == requested_state) | |
| return len; | |
| if (requested_state) | |
| ret = __iio_update_buffers(indio_dev, buffer, NULL); | |
| else | |
| ret = __iio_update_buffers(indio_dev, NULL, buffer); | |
| if (ret) | |
| return ret; | |
| return len; | |
| } | |
| static ssize_t watermark_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| return sysfs_emit(buf, "%u\n", buffer->watermark); | |
| } | |
| static ssize_t watermark_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t len) | |
| { | |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| unsigned int val; | |
| int ret; | |
| ret = kstrtouint(buf, 10, &val); | |
| if (ret) | |
| return ret; | |
| if (!val) | |
| return -EINVAL; | |
| guard(mutex)(&iio_dev_opaque->mlock); | |
| if (val > buffer->length) | |
| return -EINVAL; | |
| if (iio_buffer_is_active(buffer)) | |
| return -EBUSY; | |
| buffer->watermark = val; | |
| return len; | |
| } | |
| static ssize_t data_available_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| return sysfs_emit(buf, "%zu\n", iio_buffer_data_available(buffer)); | |
| } | |
| static ssize_t direction_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | |
| switch (buffer->direction) { | |
| case IIO_BUFFER_DIRECTION_IN: | |
| return sysfs_emit(buf, "in\n"); | |
| case IIO_BUFFER_DIRECTION_OUT: | |
| return sysfs_emit(buf, "out\n"); | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static DEVICE_ATTR_RW(length); | |
| static struct device_attribute dev_attr_length_ro = __ATTR_RO(length); | |
| static DEVICE_ATTR_RW(enable); | |
| static DEVICE_ATTR_RW(watermark); | |
| static struct device_attribute dev_attr_watermark_ro = __ATTR_RO(watermark); | |
| static DEVICE_ATTR_RO(data_available); | |
| static DEVICE_ATTR_RO(direction); | |
| /* | |
| * When adding new attributes here, put the at the end, at least until | |
| * the code that handles the length/length_ro & watermark/watermark_ro | |
| * assignments gets cleaned up. Otherwise these can create some weird | |
| * duplicate attributes errors under some setups. | |
| */ | |
| static struct attribute *iio_buffer_attrs[] = { | |
| &dev_attr_length.attr, | |
| &dev_attr_enable.attr, | |
| &dev_attr_watermark.attr, | |
| &dev_attr_data_available.attr, | |
| &dev_attr_direction.attr, | |
| }; | |
| #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr) | |
| static struct attribute *iio_buffer_wrap_attr(struct iio_buffer *buffer, | |
| struct attribute *attr) | |
| { | |
| struct device_attribute *dattr = to_dev_attr(attr); | |
| struct iio_dev_attr *iio_attr; | |
| iio_attr = kzalloc_obj(*iio_attr); | |
| if (!iio_attr) | |
| return NULL; | |
| iio_attr->buffer = buffer; | |
| memcpy(&iio_attr->dev_attr, dattr, sizeof(iio_attr->dev_attr)); | |
| iio_attr->dev_attr.attr.name = kstrdup_const(attr->name, GFP_KERNEL); | |
| if (!iio_attr->dev_attr.attr.name) { | |
| kfree(iio_attr); | |
| return NULL; | |
| } | |
| sysfs_attr_init(&iio_attr->dev_attr.attr); | |
| list_add(&iio_attr->l, &buffer->buffer_attr_list); | |
| return &iio_attr->dev_attr.attr; | |
| } | |
| static int iio_buffer_register_legacy_sysfs_groups(struct iio_dev *indio_dev, | |
| struct attribute **buffer_attrs, | |
| int buffer_attrcount, | |
| int scan_el_attrcount) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct attribute_group *group; | |
| struct attribute **attrs; | |
| int ret; | |
| attrs = kzalloc_objs(*attrs, buffer_attrcount + 1); | |
| if (!attrs) | |
| return -ENOMEM; | |
| memcpy(attrs, buffer_attrs, buffer_attrcount * sizeof(*attrs)); | |
| group = &iio_dev_opaque->legacy_buffer_group; | |
| group->attrs = attrs; | |
| group->name = "buffer"; | |
| ret = iio_device_register_sysfs_group(indio_dev, group); | |
| if (ret) | |
| goto error_free_buffer_attrs; | |
| attrs = kzalloc_objs(*attrs, scan_el_attrcount + 1); | |
| if (!attrs) { | |
| ret = -ENOMEM; | |
| goto error_free_buffer_attrs; | |
| } | |
| memcpy(attrs, &buffer_attrs[buffer_attrcount], | |
| scan_el_attrcount * sizeof(*attrs)); | |
| group = &iio_dev_opaque->legacy_scan_el_group; | |
| group->attrs = attrs; | |
| group->name = "scan_elements"; | |
| ret = iio_device_register_sysfs_group(indio_dev, group); | |
| if (ret) | |
| goto error_free_scan_el_attrs; | |
| return 0; | |
| error_free_scan_el_attrs: | |
| kfree(iio_dev_opaque->legacy_scan_el_group.attrs); | |
| error_free_buffer_attrs: | |
| kfree(iio_dev_opaque->legacy_buffer_group.attrs); | |
| return ret; | |
| } | |
| static void iio_buffer_unregister_legacy_sysfs_groups(struct iio_dev *indio_dev) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| kfree(iio_dev_opaque->legacy_buffer_group.attrs); | |
| kfree(iio_dev_opaque->legacy_scan_el_group.attrs); | |
| } | |
| static void iio_buffer_dmabuf_release(struct kref *ref) | |
| { | |
| struct iio_dmabuf_priv *priv = container_of(ref, struct iio_dmabuf_priv, ref); | |
| struct dma_buf_attachment *attach = priv->attach; | |
| struct iio_buffer *buffer = priv->buffer; | |
| struct dma_buf *dmabuf = attach->dmabuf; | |
| dma_buf_unmap_attachment_unlocked(attach, priv->sgt, priv->dir); | |
| buffer->access->detach_dmabuf(buffer, priv->block); | |
| dma_buf_detach(attach->dmabuf, attach); | |
| dma_buf_put(dmabuf); | |
| kfree(priv); | |
| } | |
| static void iio_buffer_dmabuf_get(struct dma_buf_attachment *attach) | |
| { | |
| struct iio_dmabuf_priv *priv = attach->importer_priv; | |
| kref_get(&priv->ref); | |
| } | |
| static void iio_buffer_dmabuf_put(struct dma_buf_attachment *attach) | |
| { | |
| struct iio_dmabuf_priv *priv = attach->importer_priv; | |
| kref_put(&priv->ref, iio_buffer_dmabuf_release); | |
| } | |
| static int iio_buffer_chrdev_release(struct inode *inode, struct file *filep) | |
| { | |
| struct iio_dev_buffer_pair *ib = filep->private_data; | |
| struct iio_dev *indio_dev = ib->indio_dev; | |
| struct iio_buffer *buffer = ib->buffer; | |
| struct iio_dmabuf_priv *priv, *tmp; | |
| wake_up(&buffer->pollq); | |
| guard(mutex)(&buffer->dmabufs_mutex); | |
| /* Close all attached DMABUFs */ | |
| list_for_each_entry_safe(priv, tmp, &buffer->dmabufs, entry) { | |
| list_del_init(&priv->entry); | |
| iio_buffer_dmabuf_put(priv->attach); | |
| } | |
| kfree(ib); | |
| clear_bit(IIO_BUSY_BIT_POS, &buffer->flags); | |
| iio_device_put(indio_dev); | |
| return 0; | |
| } | |
| static int iio_dma_resv_lock(struct dma_buf *dmabuf, bool nonblock) | |
| { | |
| if (!nonblock) | |
| return dma_resv_lock_interruptible(dmabuf->resv, NULL); | |
| if (!dma_resv_trylock(dmabuf->resv)) | |
| return -EBUSY; | |
| return 0; | |
| } | |
| static struct device *iio_buffer_get_dma_dev(const struct iio_dev *indio_dev, | |
| struct iio_buffer *buffer) | |
| { | |
| if (buffer->access->get_dma_dev) | |
| return buffer->access->get_dma_dev(buffer); | |
| return indio_dev->dev.parent; | |
| } | |
| static struct dma_buf_attachment * | |
| iio_buffer_find_attachment(struct iio_dev_buffer_pair *ib, | |
| struct dma_buf *dmabuf, bool nonblock) | |
| { | |
| struct iio_buffer *buffer = ib->buffer; | |
| struct device *dma_dev = iio_buffer_get_dma_dev(ib->indio_dev, buffer); | |
| struct dma_buf_attachment *attach = NULL; | |
| struct iio_dmabuf_priv *priv; | |
| guard(mutex)(&buffer->dmabufs_mutex); | |
| list_for_each_entry(priv, &buffer->dmabufs, entry) { | |
| if (priv->attach->dev == dma_dev | |
| && priv->attach->dmabuf == dmabuf) { | |
| attach = priv->attach; | |
| break; | |
| } | |
| } | |
| if (attach) | |
| iio_buffer_dmabuf_get(attach); | |
| return attach ?: ERR_PTR(-EPERM); | |
| } | |
| static int iio_buffer_attach_dmabuf(struct iio_dev_buffer_pair *ib, | |
| int __user *user_fd, bool nonblock) | |
| { | |
| struct iio_dev *indio_dev = ib->indio_dev; | |
| struct iio_buffer *buffer = ib->buffer; | |
| struct device *dma_dev = iio_buffer_get_dma_dev(indio_dev, buffer); | |
| struct dma_buf_attachment *attach; | |
| struct iio_dmabuf_priv *priv, *each; | |
| struct dma_buf *dmabuf; | |
| int err, fd; | |
| if (!buffer->access->attach_dmabuf | |
| || !buffer->access->detach_dmabuf | |
| || !buffer->access->enqueue_dmabuf) | |
| return -EPERM; | |
| if (copy_from_user(&fd, user_fd, sizeof(fd))) | |
| return -EFAULT; | |
| priv = kzalloc_obj(*priv); | |
| if (!priv) | |
| return -ENOMEM; | |
| spin_lock_init(&priv->lock); | |
| priv->context = dma_fence_context_alloc(1); | |
| dmabuf = dma_buf_get(fd); | |
| if (IS_ERR(dmabuf)) { | |
| err = PTR_ERR(dmabuf); | |
| goto err_free_priv; | |
| } | |
| attach = dma_buf_attach(dmabuf, dma_dev); | |
| if (IS_ERR(attach)) { | |
| err = PTR_ERR(attach); | |
| goto err_dmabuf_put; | |
| } | |
| err = iio_dma_resv_lock(dmabuf, nonblock); | |
| if (err) | |
| goto err_dmabuf_detach; | |
| priv->dir = buffer->direction == IIO_BUFFER_DIRECTION_IN | |
| ? DMA_FROM_DEVICE : DMA_TO_DEVICE; | |
| priv->sgt = dma_buf_map_attachment(attach, priv->dir); | |
| if (IS_ERR(priv->sgt)) { | |
| err = PTR_ERR(priv->sgt); | |
| dev_err(&indio_dev->dev, "Unable to map attachment: %d\n", err); | |
| goto err_resv_unlock; | |
| } | |
| kref_init(&priv->ref); | |
| priv->buffer = buffer; | |
| priv->attach = attach; | |
| attach->importer_priv = priv; | |
| priv->block = buffer->access->attach_dmabuf(buffer, attach); | |
| if (IS_ERR(priv->block)) { | |
| err = PTR_ERR(priv->block); | |
| goto err_dmabuf_unmap_attachment; | |
| } | |
| dma_resv_unlock(dmabuf->resv); | |
| mutex_lock(&buffer->dmabufs_mutex); | |
| /* | |
| * Check whether we already have an attachment for this driver/DMABUF | |
| * combo. If we do, refuse to attach. | |
| */ | |
| list_for_each_entry(each, &buffer->dmabufs, entry) { | |
| if (each->attach->dev == dma_dev | |
| && each->attach->dmabuf == dmabuf) { | |
| /* | |
| * We unlocked the reservation object, so going through | |
| * the cleanup code would mean re-locking it first. | |
| * At this stage it is simpler to free the attachment | |
| * using iio_buffer_dma_put(). | |
| */ | |
| mutex_unlock(&buffer->dmabufs_mutex); | |
| iio_buffer_dmabuf_put(attach); | |
| return -EBUSY; | |
| } | |
| } | |
| /* Otherwise, add the new attachment to our dmabufs list. */ | |
| list_add(&priv->entry, &buffer->dmabufs); | |
| mutex_unlock(&buffer->dmabufs_mutex); | |
| return 0; | |
| err_dmabuf_unmap_attachment: | |
| dma_buf_unmap_attachment(attach, priv->sgt, priv->dir); | |
| err_resv_unlock: | |
| dma_resv_unlock(dmabuf->resv); | |
| err_dmabuf_detach: | |
| dma_buf_detach(dmabuf, attach); | |
| err_dmabuf_put: | |
| dma_buf_put(dmabuf); | |
| err_free_priv: | |
| kfree(priv); | |
| return err; | |
| } | |
| static int iio_buffer_detach_dmabuf(struct iio_dev_buffer_pair *ib, | |
| int __user *user_req, bool nonblock) | |
| { | |
| struct iio_buffer *buffer = ib->buffer; | |
| struct iio_dev *indio_dev = ib->indio_dev; | |
| struct device *dma_dev = iio_buffer_get_dma_dev(indio_dev, buffer); | |
| struct iio_dmabuf_priv *priv; | |
| struct dma_buf *dmabuf; | |
| int dmabuf_fd, ret = -EPERM; | |
| if (copy_from_user(&dmabuf_fd, user_req, sizeof(dmabuf_fd))) | |
| return -EFAULT; | |
| dmabuf = dma_buf_get(dmabuf_fd); | |
| if (IS_ERR(dmabuf)) | |
| return PTR_ERR(dmabuf); | |
| guard(mutex)(&buffer->dmabufs_mutex); | |
| list_for_each_entry(priv, &buffer->dmabufs, entry) { | |
| if (priv->attach->dev == dma_dev | |
| && priv->attach->dmabuf == dmabuf) { | |
| list_del(&priv->entry); | |
| /* Unref the reference from iio_buffer_attach_dmabuf() */ | |
| iio_buffer_dmabuf_put(priv->attach); | |
| ret = 0; | |
| break; | |
| } | |
| } | |
| dma_buf_put(dmabuf); | |
| return ret; | |
| } | |
| static const char * | |
| iio_buffer_dma_fence_get_driver_name(struct dma_fence *fence) | |
| { | |
| return "iio"; | |
| } | |
| static void iio_buffer_dma_fence_release(struct dma_fence *fence) | |
| { | |
| struct iio_dma_fence *iio_fence = | |
| container_of(fence, struct iio_dma_fence, base); | |
| kfree(iio_fence); | |
| } | |
| static const struct dma_fence_ops iio_buffer_dma_fence_ops = { | |
| .get_driver_name = iio_buffer_dma_fence_get_driver_name, | |
| .get_timeline_name = iio_buffer_dma_fence_get_driver_name, | |
| .release = iio_buffer_dma_fence_release, | |
| }; | |
| static int iio_buffer_enqueue_dmabuf(struct iio_dev_buffer_pair *ib, | |
| struct iio_dmabuf __user *iio_dmabuf_req, | |
| bool nonblock) | |
| { | |
| struct iio_buffer *buffer = ib->buffer; | |
| struct iio_dmabuf iio_dmabuf; | |
| struct dma_buf_attachment *attach; | |
| struct iio_dmabuf_priv *priv; | |
| struct iio_dma_fence *fence; | |
| struct dma_buf *dmabuf; | |
| unsigned long timeout; | |
| bool cookie, cyclic, dma_to_ram; | |
| long retl; | |
| u32 seqno; | |
| int ret; | |
| if (copy_from_user(&iio_dmabuf, iio_dmabuf_req, sizeof(iio_dmabuf))) | |
| return -EFAULT; | |
| if (iio_dmabuf.flags & ~IIO_BUFFER_DMABUF_SUPPORTED_FLAGS) | |
| return -EINVAL; | |
| cyclic = iio_dmabuf.flags & IIO_BUFFER_DMABUF_CYCLIC; | |
| /* Cyclic flag is only supported on output buffers */ | |
| if (cyclic && buffer->direction != IIO_BUFFER_DIRECTION_OUT) | |
| return -EINVAL; | |
| dmabuf = dma_buf_get(iio_dmabuf.fd); | |
| if (IS_ERR(dmabuf)) | |
| return PTR_ERR(dmabuf); | |
| if (!iio_dmabuf.bytes_used || iio_dmabuf.bytes_used > dmabuf->size) { | |
| ret = -EINVAL; | |
| goto err_dmabuf_put; | |
| } | |
| attach = iio_buffer_find_attachment(ib, dmabuf, nonblock); | |
| if (IS_ERR(attach)) { | |
| ret = PTR_ERR(attach); | |
| goto err_dmabuf_put; | |
| } | |
| priv = attach->importer_priv; | |
| fence = kmalloc_obj(*fence); | |
| if (!fence) { | |
| ret = -ENOMEM; | |
| goto err_attachment_put; | |
| } | |
| fence->priv = priv; | |
| seqno = atomic_add_return(1, &priv->seqno); | |
| /* | |
| * The transfers are guaranteed to be processed in the order they are | |
| * enqueued, so we can use a simple incrementing sequence number for | |
| * the dma_fence. | |
| */ | |
| dma_fence_init(&fence->base, &iio_buffer_dma_fence_ops, | |
| &priv->lock, priv->context, seqno); | |
| ret = iio_dma_resv_lock(dmabuf, nonblock); | |
| if (ret) | |
| goto err_fence_put; | |
| timeout = nonblock ? 0 : msecs_to_jiffies(DMABUF_ENQUEUE_TIMEOUT_MS); | |
| dma_to_ram = buffer->direction == IIO_BUFFER_DIRECTION_IN; | |
| /* Make sure we don't have writers */ | |
| retl = dma_resv_wait_timeout(dmabuf->resv, | |
| dma_resv_usage_rw(dma_to_ram), | |
| true, timeout); | |
| if (retl == 0) | |
| retl = -EBUSY; | |
| if (retl < 0) { | |
| ret = (int)retl; | |
| goto err_resv_unlock; | |
| } | |
| if (buffer->access->lock_queue) | |
| buffer->access->lock_queue(buffer); | |
| ret = dma_resv_reserve_fences(dmabuf->resv, 1); | |
| if (ret) | |
| goto err_queue_unlock; | |
| dma_resv_add_fence(dmabuf->resv, &fence->base, | |
| dma_to_ram ? DMA_RESV_USAGE_WRITE : DMA_RESV_USAGE_READ); | |
| dma_fence_put(&fence->base); | |
| dma_resv_unlock(dmabuf->resv); | |
| cookie = dma_fence_begin_signalling(); | |
| ret = buffer->access->enqueue_dmabuf(buffer, priv->block, &fence->base, | |
| priv->sgt, iio_dmabuf.bytes_used, | |
| cyclic); | |
| if (ret) { | |
| /* | |
| * DMABUF enqueue failed, but we already added the fence. | |
| * Signal the error through the fence completion mechanism. | |
| */ | |
| iio_buffer_signal_dmabuf_done(&fence->base, ret); | |
| } | |
| if (buffer->access->unlock_queue) | |
| buffer->access->unlock_queue(buffer); | |
| dma_fence_end_signalling(cookie); | |
| dma_buf_put(dmabuf); | |
| return ret; | |
| err_queue_unlock: | |
| if (buffer->access->unlock_queue) | |
| buffer->access->unlock_queue(buffer); | |
| err_resv_unlock: | |
| dma_resv_unlock(dmabuf->resv); | |
| err_fence_put: | |
| dma_fence_put(&fence->base); | |
| err_attachment_put: | |
| iio_buffer_dmabuf_put(attach); | |
| err_dmabuf_put: | |
| dma_buf_put(dmabuf); | |
| return ret; | |
| } | |
| static void iio_buffer_cleanup(struct work_struct *work) | |
| { | |
| struct iio_dma_fence *fence = | |
| container_of(work, struct iio_dma_fence, work); | |
| struct iio_dmabuf_priv *priv = fence->priv; | |
| struct dma_buf_attachment *attach = priv->attach; | |
| dma_fence_put(&fence->base); | |
| iio_buffer_dmabuf_put(attach); | |
| } | |
| void iio_buffer_signal_dmabuf_done(struct dma_fence *fence, int ret) | |
| { | |
| struct iio_dma_fence *iio_fence = | |
| container_of(fence, struct iio_dma_fence, base); | |
| bool cookie = dma_fence_begin_signalling(); | |
| /* | |
| * Get a reference to the fence, so that it's not freed as soon as | |
| * it's signaled. | |
| */ | |
| dma_fence_get(fence); | |
| fence->error = ret; | |
| dma_fence_signal(fence); | |
| dma_fence_end_signalling(cookie); | |
| /* | |
| * The fence will be unref'd in iio_buffer_cleanup. | |
| * It can't be done here, as the unref functions might try to lock the | |
| * resv object, which can deadlock. | |
| */ | |
| INIT_WORK(&iio_fence->work, iio_buffer_cleanup); | |
| schedule_work(&iio_fence->work); | |
| } | |
| EXPORT_SYMBOL_GPL(iio_buffer_signal_dmabuf_done); | |
| static long iio_buffer_chrdev_ioctl(struct file *filp, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| struct iio_dev_buffer_pair *ib = filp->private_data; | |
| void __user *_arg = (void __user *)arg; | |
| bool nonblock = filp->f_flags & O_NONBLOCK; | |
| switch (cmd) { | |
| case IIO_BUFFER_DMABUF_ATTACH_IOCTL: | |
| return iio_buffer_attach_dmabuf(ib, _arg, nonblock); | |
| case IIO_BUFFER_DMABUF_DETACH_IOCTL: | |
| return iio_buffer_detach_dmabuf(ib, _arg, nonblock); | |
| case IIO_BUFFER_DMABUF_ENQUEUE_IOCTL: | |
| return iio_buffer_enqueue_dmabuf(ib, _arg, nonblock); | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static const struct file_operations iio_buffer_chrdev_fileops = { | |
| .owner = THIS_MODULE, | |
| .llseek = noop_llseek, | |
| .read = iio_buffer_read, | |
| .write = iio_buffer_write, | |
| .unlocked_ioctl = iio_buffer_chrdev_ioctl, | |
| .compat_ioctl = compat_ptr_ioctl, | |
| .poll = iio_buffer_poll, | |
| .release = iio_buffer_chrdev_release, | |
| }; | |
| static long iio_device_buffer_getfd(struct iio_dev *indio_dev, unsigned long arg) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| int __user *ival = (int __user *)arg; | |
| struct iio_dev_buffer_pair *ib; | |
| struct iio_buffer *buffer; | |
| int fd, idx, ret; | |
| if (copy_from_user(&idx, ival, sizeof(idx))) | |
| return -EFAULT; | |
| if (idx >= iio_dev_opaque->attached_buffers_cnt) | |
| return -ENODEV; | |
| iio_device_get(indio_dev); | |
| buffer = iio_dev_opaque->attached_buffers[idx]; | |
| if (test_and_set_bit(IIO_BUSY_BIT_POS, &buffer->flags)) { | |
| ret = -EBUSY; | |
| goto error_iio_dev_put; | |
| } | |
| ib = kzalloc_obj(*ib); | |
| if (!ib) { | |
| ret = -ENOMEM; | |
| goto error_clear_busy_bit; | |
| } | |
| ib->indio_dev = indio_dev; | |
| ib->buffer = buffer; | |
| fd = anon_inode_getfd("iio:buffer", &iio_buffer_chrdev_fileops, | |
| ib, O_RDWR | O_CLOEXEC); | |
| if (fd < 0) { | |
| ret = fd; | |
| goto error_free_ib; | |
| } | |
| if (copy_to_user(ival, &fd, sizeof(fd))) { | |
| /* | |
| * "Leak" the fd, as there's not much we can do about this | |
| * anyway. 'fd' might have been closed already, as | |
| * anon_inode_getfd() called fd_install() on it, which made | |
| * it reachable by userland. | |
| * | |
| * Instead of allowing a malicious user to play tricks with | |
| * us, rely on the process exit path to do any necessary | |
| * cleanup, as in releasing the file, if still needed. | |
| */ | |
| return -EFAULT; | |
| } | |
| return 0; | |
| error_free_ib: | |
| kfree(ib); | |
| error_clear_busy_bit: | |
| clear_bit(IIO_BUSY_BIT_POS, &buffer->flags); | |
| error_iio_dev_put: | |
| iio_device_put(indio_dev); | |
| return ret; | |
| } | |
| static long iio_device_buffer_ioctl(struct iio_dev *indio_dev, struct file *filp, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| switch (cmd) { | |
| case IIO_BUFFER_GET_FD_IOCTL: | |
| return iio_device_buffer_getfd(indio_dev, arg); | |
| default: | |
| return IIO_IOCTL_UNHANDLED; | |
| } | |
| } | |
| static int iio_channel_validate_scan_type(struct device *dev, int ch, | |
| const struct iio_scan_type *scan_type) | |
| { | |
| /* Verify that sample bits fit into storage */ | |
| if (scan_type->storagebits < scan_type->realbits + scan_type->shift) { | |
| dev_err(dev, | |
| "Channel %d storagebits (%d) < shifted realbits (%d + %d)\n", | |
| ch, scan_type->storagebits, | |
| scan_type->realbits, | |
| scan_type->shift); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int __iio_buffer_alloc_sysfs_and_mask(struct iio_buffer *buffer, | |
| struct iio_dev *indio_dev, | |
| int index) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| unsigned int masklength = iio_get_masklength(indio_dev); | |
| struct iio_dev_attr *p; | |
| const struct iio_dev_attr *id_attr; | |
| struct attribute **attr; | |
| int ret, i, attrn, scan_el_attrcount, buffer_attrcount; | |
| const struct iio_chan_spec *channels; | |
| buffer_attrcount = 0; | |
| if (buffer->attrs) { | |
| while (buffer->attrs[buffer_attrcount]) | |
| buffer_attrcount++; | |
| } | |
| buffer_attrcount += ARRAY_SIZE(iio_buffer_attrs); | |
| scan_el_attrcount = 0; | |
| INIT_LIST_HEAD(&buffer->buffer_attr_list); | |
| channels = indio_dev->channels; | |
| if (channels) { | |
| /* new magic */ | |
| for (i = 0; i < indio_dev->num_channels; i++) { | |
| const struct iio_scan_type *scan_type; | |
| if (channels[i].scan_index < 0) | |
| continue; | |
| if (channels[i].has_ext_scan_type) { | |
| int j; | |
| /* | |
| * get_current_scan_type is required when using | |
| * extended scan types. | |
| */ | |
| if (!indio_dev->info->get_current_scan_type) { | |
| ret = -EINVAL; | |
| goto error_cleanup_dynamic; | |
| } | |
| for (j = 0; j < channels[i].num_ext_scan_type; j++) { | |
| scan_type = &channels[i].ext_scan_type[j]; | |
| ret = iio_channel_validate_scan_type( | |
| &indio_dev->dev, i, scan_type); | |
| if (ret) | |
| goto error_cleanup_dynamic; | |
| } | |
| } else { | |
| scan_type = &channels[i].scan_type; | |
| ret = iio_channel_validate_scan_type( | |
| &indio_dev->dev, i, scan_type); | |
| if (ret) | |
| goto error_cleanup_dynamic; | |
| } | |
| ret = iio_buffer_add_channel_sysfs(indio_dev, buffer, | |
| &channels[i]); | |
| if (ret < 0) | |
| goto error_cleanup_dynamic; | |
| scan_el_attrcount += ret; | |
| if (channels[i].type == IIO_TIMESTAMP) | |
| iio_dev_opaque->scan_index_timestamp = | |
| channels[i].scan_index; | |
| } | |
| if (masklength && !buffer->scan_mask) { | |
| buffer->scan_mask = bitmap_zalloc(masklength, | |
| GFP_KERNEL); | |
| if (!buffer->scan_mask) { | |
| ret = -ENOMEM; | |
| goto error_cleanup_dynamic; | |
| } | |
| } | |
| } | |
| attrn = buffer_attrcount + scan_el_attrcount; | |
| attr = kzalloc_objs(*attr, attrn + 1); | |
| if (!attr) { | |
| ret = -ENOMEM; | |
| goto error_free_scan_mask; | |
| } | |
| memcpy(attr, iio_buffer_attrs, sizeof(iio_buffer_attrs)); | |
| if (!buffer->access->set_length) | |
| attr[0] = &dev_attr_length_ro.attr; | |
| if (buffer->access->flags & INDIO_BUFFER_FLAG_FIXED_WATERMARK) | |
| attr[2] = &dev_attr_watermark_ro.attr; | |
| if (buffer->attrs) | |
| for (i = 0, id_attr = buffer->attrs[i]; | |
| (id_attr = buffer->attrs[i]); i++) | |
| attr[ARRAY_SIZE(iio_buffer_attrs) + i] = | |
| (struct attribute *)&id_attr->dev_attr.attr; | |
| buffer->buffer_group.attrs = attr; | |
| for (i = 0; i < buffer_attrcount; i++) { | |
| struct attribute *wrapped; | |
| wrapped = iio_buffer_wrap_attr(buffer, attr[i]); | |
| if (!wrapped) { | |
| ret = -ENOMEM; | |
| goto error_free_buffer_attrs; | |
| } | |
| attr[i] = wrapped; | |
| } | |
| attrn = 0; | |
| list_for_each_entry(p, &buffer->buffer_attr_list, l) | |
| attr[attrn++] = &p->dev_attr.attr; | |
| buffer->buffer_group.name = kasprintf(GFP_KERNEL, "buffer%d", index); | |
| if (!buffer->buffer_group.name) { | |
| ret = -ENOMEM; | |
| goto error_free_buffer_attrs; | |
| } | |
| ret = iio_device_register_sysfs_group(indio_dev, &buffer->buffer_group); | |
| if (ret) | |
| goto error_free_buffer_attr_group_name; | |
| /* we only need to register the legacy groups for the first buffer */ | |
| if (index > 0) | |
| return 0; | |
| ret = iio_buffer_register_legacy_sysfs_groups(indio_dev, attr, | |
| buffer_attrcount, | |
| scan_el_attrcount); | |
| if (ret) | |
| goto error_free_buffer_attr_group_name; | |
| return 0; | |
| error_free_buffer_attr_group_name: | |
| kfree(buffer->buffer_group.name); | |
| error_free_buffer_attrs: | |
| kfree(buffer->buffer_group.attrs); | |
| error_free_scan_mask: | |
| bitmap_free(buffer->scan_mask); | |
| error_cleanup_dynamic: | |
| iio_free_chan_devattr_list(&buffer->buffer_attr_list); | |
| return ret; | |
| } | |
| static void __iio_buffer_free_sysfs_and_mask(struct iio_buffer *buffer, | |
| struct iio_dev *indio_dev, | |
| int index) | |
| { | |
| if (index == 0) | |
| iio_buffer_unregister_legacy_sysfs_groups(indio_dev); | |
| bitmap_free(buffer->scan_mask); | |
| kfree(buffer->buffer_group.name); | |
| kfree(buffer->buffer_group.attrs); | |
| iio_free_chan_devattr_list(&buffer->buffer_attr_list); | |
| } | |
| int iio_buffers_alloc_sysfs_and_mask(struct iio_dev *indio_dev) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| const struct iio_chan_spec *channels; | |
| struct iio_buffer *buffer; | |
| int ret, i, idx; | |
| size_t sz; | |
| channels = indio_dev->channels; | |
| if (channels) { | |
| int ml = 0; | |
| for (i = 0; i < indio_dev->num_channels; i++) | |
| ml = max(ml, channels[i].scan_index + 1); | |
| ACCESS_PRIVATE(indio_dev, masklength) = ml; | |
| } | |
| if (!iio_dev_opaque->attached_buffers_cnt) | |
| return 0; | |
| for (idx = 0; idx < iio_dev_opaque->attached_buffers_cnt; idx++) { | |
| buffer = iio_dev_opaque->attached_buffers[idx]; | |
| ret = __iio_buffer_alloc_sysfs_and_mask(buffer, indio_dev, idx); | |
| if (ret) | |
| goto error_unwind_sysfs_and_mask; | |
| } | |
| sz = sizeof(*iio_dev_opaque->buffer_ioctl_handler); | |
| iio_dev_opaque->buffer_ioctl_handler = kzalloc(sz, GFP_KERNEL); | |
| if (!iio_dev_opaque->buffer_ioctl_handler) { | |
| ret = -ENOMEM; | |
| goto error_unwind_sysfs_and_mask; | |
| } | |
| iio_dev_opaque->buffer_ioctl_handler->ioctl = iio_device_buffer_ioctl; | |
| iio_device_ioctl_handler_register(indio_dev, | |
| iio_dev_opaque->buffer_ioctl_handler); | |
| return 0; | |
| error_unwind_sysfs_and_mask: | |
| while (idx--) { | |
| buffer = iio_dev_opaque->attached_buffers[idx]; | |
| __iio_buffer_free_sysfs_and_mask(buffer, indio_dev, idx); | |
| } | |
| return ret; | |
| } | |
| void iio_buffers_free_sysfs_and_mask(struct iio_dev *indio_dev) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer *buffer; | |
| int i; | |
| if (!iio_dev_opaque->attached_buffers_cnt) | |
| return; | |
| iio_device_ioctl_handler_unregister(iio_dev_opaque->buffer_ioctl_handler); | |
| kfree(iio_dev_opaque->buffer_ioctl_handler); | |
| for (i = iio_dev_opaque->attached_buffers_cnt - 1; i >= 0; i--) { | |
| buffer = iio_dev_opaque->attached_buffers[i]; | |
| __iio_buffer_free_sysfs_and_mask(buffer, indio_dev, i); | |
| } | |
| } | |
| /** | |
| * iio_validate_scan_mask_onehot() - Validates that exactly one channel is selected | |
| * @indio_dev: the iio device | |
| * @mask: scan mask to be checked | |
| * | |
| * Return true if exactly one bit is set in the scan mask, false otherwise. It | |
| * can be used for devices where only one channel can be active for sampling at | |
| * a time. | |
| */ | |
| bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev, | |
| const unsigned long *mask) | |
| { | |
| return bitmap_weight(mask, iio_get_masklength(indio_dev)) == 1; | |
| } | |
| EXPORT_SYMBOL_GPL(iio_validate_scan_mask_onehot); | |
| static const void *iio_demux(struct iio_buffer *buffer, | |
| const void *datain) | |
| { | |
| struct iio_demux_table *t; | |
| if (list_empty(&buffer->demux_list)) | |
| return datain; | |
| list_for_each_entry(t, &buffer->demux_list, l) | |
| memcpy(buffer->demux_bounce + t->to, | |
| datain + t->from, t->length); | |
| return buffer->demux_bounce; | |
| } | |
| static int iio_push_to_buffer(struct iio_buffer *buffer, const void *data) | |
| { | |
| const void *dataout = iio_demux(buffer, data); | |
| int ret; | |
| ret = buffer->access->store_to(buffer, dataout); | |
| if (ret) | |
| return ret; | |
| /* | |
| * We can't just test for watermark to decide if we wake the poll queue | |
| * because read may request less samples than the watermark. | |
| */ | |
| wake_up_interruptible_poll(&buffer->pollq, EPOLLIN | EPOLLRDNORM); | |
| return 0; | |
| } | |
| /** | |
| * iio_push_to_buffers() - push to a registered buffer. | |
| * @indio_dev: iio_dev structure for device. | |
| * @data: Full scan. | |
| * | |
| * Context: Any context. | |
| * Return: 0 on success, negative error code on failure. | |
| */ | |
| int iio_push_to_buffers(struct iio_dev *indio_dev, const void *data) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| int ret; | |
| struct iio_buffer *buf; | |
| list_for_each_entry(buf, &iio_dev_opaque->buffer_list, buffer_list) { | |
| ret = iio_push_to_buffer(buf, data); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(iio_push_to_buffers); | |
| /** | |
| * iio_push_to_buffers_with_ts_unaligned() - push to registered buffer, | |
| * no alignment or space requirements. | |
| * @indio_dev: iio_dev structure for device. | |
| * @data: channel data excluding the timestamp. | |
| * @data_sz: size of data. | |
| * @timestamp: timestamp for the sample data. | |
| * | |
| * This special variant of iio_push_to_buffers_with_timestamp() does | |
| * not require space for the timestamp, or 8 byte alignment of data. | |
| * It does however require an allocation on first call and additional | |
| * copies on all calls, so should be avoided if possible. | |
| * | |
| * Context: May sleep. | |
| * Return: 0 on success, negative error code on failure. | |
| */ | |
| int iio_push_to_buffers_with_ts_unaligned(struct iio_dev *indio_dev, | |
| const void *data, | |
| size_t data_sz, | |
| s64 timestamp) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| might_sleep(); | |
| /* | |
| * Conservative estimate - we can always safely copy the minimum | |
| * of either the data provided or the length of the destination buffer. | |
| * This relaxed limit allows the calling drivers to be lax about | |
| * tracking the size of the data they are pushing, at the cost of | |
| * unnecessary copying of padding. | |
| */ | |
| data_sz = min_t(size_t, indio_dev->scan_bytes, data_sz); | |
| if (iio_dev_opaque->bounce_buffer_size != indio_dev->scan_bytes) { | |
| void *bb; | |
| bb = devm_krealloc(&indio_dev->dev, | |
| iio_dev_opaque->bounce_buffer, | |
| indio_dev->scan_bytes, GFP_KERNEL); | |
| if (!bb) | |
| return -ENOMEM; | |
| iio_dev_opaque->bounce_buffer = bb; | |
| iio_dev_opaque->bounce_buffer_size = indio_dev->scan_bytes; | |
| } | |
| memcpy(iio_dev_opaque->bounce_buffer, data, data_sz); | |
| return iio_push_to_buffers_with_timestamp(indio_dev, | |
| iio_dev_opaque->bounce_buffer, | |
| timestamp); | |
| } | |
| EXPORT_SYMBOL_GPL(iio_push_to_buffers_with_ts_unaligned); | |
| /** | |
| * iio_buffer_release() - Free a buffer's resources | |
| * @ref: Pointer to the kref embedded in the iio_buffer struct | |
| * | |
| * This function is called when the last reference to the buffer has been | |
| * dropped. It will typically free all resources allocated by the buffer. Do not | |
| * call this function manually, always use iio_buffer_put() when done using a | |
| * buffer. | |
| */ | |
| static void iio_buffer_release(struct kref *ref) | |
| { | |
| struct iio_buffer *buffer = container_of(ref, struct iio_buffer, ref); | |
| mutex_destroy(&buffer->dmabufs_mutex); | |
| buffer->access->release(buffer); | |
| } | |
| /** | |
| * iio_buffer_get() - Grab a reference to the buffer | |
| * @buffer: The buffer to grab a reference for, may be NULL | |
| * | |
| * Returns the pointer to the buffer that was passed into the function. | |
| */ | |
| struct iio_buffer *iio_buffer_get(struct iio_buffer *buffer) | |
| { | |
| if (buffer) | |
| kref_get(&buffer->ref); | |
| return buffer; | |
| } | |
| EXPORT_SYMBOL_GPL(iio_buffer_get); | |
| /** | |
| * iio_buffer_put() - Release the reference to the buffer | |
| * @buffer: The buffer to release the reference for, may be NULL | |
| */ | |
| void iio_buffer_put(struct iio_buffer *buffer) | |
| { | |
| if (buffer) | |
| kref_put(&buffer->ref, iio_buffer_release); | |
| } | |
| EXPORT_SYMBOL_GPL(iio_buffer_put); | |
| /** | |
| * iio_device_attach_buffer - Attach a buffer to a IIO device | |
| * @indio_dev: The device the buffer should be attached to | |
| * @buffer: The buffer to attach to the device | |
| * | |
| * Return 0 if successful, negative if error. | |
| * | |
| * This function attaches a buffer to a IIO device. The buffer stays attached to | |
| * the device until the device is freed. For legacy reasons, the first attached | |
| * buffer will also be assigned to 'indio_dev->buffer'. | |
| * The array allocated here, will be free'd via the iio_device_detach_buffers() | |
| * call which is handled by the iio_device_free(). | |
| */ | |
| int iio_device_attach_buffer(struct iio_dev *indio_dev, | |
| struct iio_buffer *buffer) | |
| { | |
| struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | |
| struct iio_buffer **new, **old = iio_dev_opaque->attached_buffers; | |
| unsigned int cnt = iio_dev_opaque->attached_buffers_cnt; | |
| cnt++; | |
| new = krealloc(old, sizeof(*new) * cnt, GFP_KERNEL); | |
| if (!new) | |
| return -ENOMEM; | |
| iio_dev_opaque->attached_buffers = new; | |
| buffer = iio_buffer_get(buffer); | |
| /* first buffer is legacy; attach it to the IIO device directly */ | |
| if (!indio_dev->buffer) | |
| indio_dev->buffer = buffer; | |
| iio_dev_opaque->attached_buffers[cnt - 1] = buffer; | |
| iio_dev_opaque->attached_buffers_cnt = cnt; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(iio_device_attach_buffer); |