| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqchip.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/soc/qcom/irq.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #define PDC_MAX_GPIO_IRQS 256 | |
| #define PDC_DRV_SIZE 0x10000 | |
| /* Valid only on HW version < 3.2 */ | |
| #define IRQ_ENABLE_BANK 0x10 | |
| #define IRQ_ENABLE_BANK_MAX (IRQ_ENABLE_BANK + BITS_TO_BYTES(PDC_MAX_GPIO_IRQS)) | |
| #define IRQ_ENABLE_BANK_INDEX_MASK GENMASK(31, 5) | |
| #define IRQ_ENABLE_BANK_BIT_MASK GENMASK(4, 0) | |
| #define IRQ_i_CFG 0x110 | |
| /* Valid only on HW version >= 3.2 */ | |
| #define IRQ_i_CFG_IRQ_ENABLE 3 | |
| #define IRQ_i_CFG_TYPE_MASK GENMASK(2, 0) | |
| #define PDC_VERSION_REG 0x1000 | |
| #define PDC_VERSION_MAJOR GENMASK(23, 16) | |
| #define PDC_VERSION_MINOR GENMASK(15, 8) | |
| #define PDC_VERSION_STEP GENMASK(7, 0) | |
| #define PDC_VERSION(maj, min, step) (FIELD_PREP(PDC_VERSION_MAJOR, (maj)) | \ | |
| FIELD_PREP(PDC_VERSION_MINOR, (min)) | \ | |
| FIELD_PREP(PDC_VERSION_STEP, (step))) | |
| /* Notable PDC versions */ | |
| #define PDC_VERSION_3_2 PDC_VERSION(3, 2, 0) | |
| struct pdc_pin_region { | |
| u32 pin_base; | |
| u32 parent_base; | |
| u32 cnt; | |
| }; | |
| #define pin_to_hwirq(r, p) ((r)->parent_base + (p) - (r)->pin_base) | |
| static DEFINE_RAW_SPINLOCK(pdc_lock); | |
| static void __iomem *pdc_base; | |
| static void __iomem *pdc_prev_base; | |
| static struct pdc_pin_region *pdc_region; | |
| static int pdc_region_cnt; | |
| static unsigned int pdc_version; | |
| static bool pdc_x1e_quirk; | |
| static void pdc_base_reg_write(void __iomem *base, int reg, u32 i, u32 val) | |
| { | |
| writel_relaxed(val, base + reg + i * sizeof(u32)); | |
| } | |
| static void pdc_reg_write(int reg, u32 i, u32 val) | |
| { | |
| pdc_base_reg_write(pdc_base, reg, i, val); | |
| } | |
| static u32 pdc_reg_read(int reg, u32 i) | |
| { | |
| return readl_relaxed(pdc_base + reg + i * sizeof(u32)); | |
| } | |
| static void pdc_x1e_irq_enable_write(u32 bank, u32 enable) | |
| { | |
| void __iomem *base; | |
| /* Remap the write access to work around a hardware bug on X1E */ | |
| switch (bank) { | |
| case 0 ... 1: | |
| /* Use previous DRV (client) region and shift to bank 3-4 */ | |
| base = pdc_prev_base; | |
| bank += 3; | |
| break; | |
| case 2 ... 4: | |
| /* Use our own region and shift to bank 0-2 */ | |
| base = pdc_base; | |
| bank -= 2; | |
| break; | |
| case 5: | |
| /* No fixup required for bank 5 */ | |
| base = pdc_base; | |
| break; | |
| default: | |
| WARN_ON(1); | |
| return; | |
| } | |
| pdc_base_reg_write(base, IRQ_ENABLE_BANK, bank, enable); | |
| } | |
| static void pdc_enable_intr_bank(int pin_out, bool on) | |
| { | |
| unsigned long enable; | |
| u32 index, mask; | |
| index = FIELD_GET(IRQ_ENABLE_BANK_INDEX_MASK, pin_out); | |
| mask = FIELD_GET(IRQ_ENABLE_BANK_BIT_MASK, pin_out); | |
| enable = pdc_reg_read(IRQ_ENABLE_BANK, index); | |
| __assign_bit(mask, &enable, on); | |
| if (pdc_x1e_quirk) | |
| pdc_x1e_irq_enable_write(index, enable); | |
| else | |
| pdc_reg_write(IRQ_ENABLE_BANK, index, enable); | |
| } | |
| static void pdc_enable_intr_cfg(int pin_out, bool on) | |
| { | |
| unsigned long enable = pdc_reg_read(IRQ_i_CFG, pin_out); | |
| __assign_bit(IRQ_i_CFG_IRQ_ENABLE, &enable, on); | |
| pdc_reg_write(IRQ_i_CFG, pin_out, enable); | |
| } | |
| static void __pdc_enable_intr(int pin_out, bool on) | |
| { | |
| if (pdc_version < PDC_VERSION_3_2) | |
| pdc_enable_intr_bank(pin_out, on); | |
| else | |
| pdc_enable_intr_cfg(pin_out, on); | |
| } | |
| static void pdc_enable_intr(struct irq_data *d, bool on) | |
| { | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&pdc_lock, flags); | |
| __pdc_enable_intr(d->hwirq, on); | |
| raw_spin_unlock_irqrestore(&pdc_lock, flags); | |
| } | |
| static void qcom_pdc_gic_disable(struct irq_data *d) | |
| { | |
| pdc_enable_intr(d, false); | |
| irq_chip_disable_parent(d); | |
| } | |
| static void qcom_pdc_gic_enable(struct irq_data *d) | |
| { | |
| pdc_enable_intr(d, true); | |
| irq_chip_enable_parent(d); | |
| } | |
| /* | |
| * GIC does not handle falling edge or active low. To allow falling edge and | |
| * active low interrupts to be handled at GIC, PDC has an inverter that inverts | |
| * falling edge into a rising edge and active low into an active high. | |
| * For the inverter to work, the polarity bit in the IRQ_CONFIG register has to | |
| * set as per the table below. | |
| * Level sensitive active low LOW | |
| * Rising edge sensitive NOT USED | |
| * Falling edge sensitive LOW | |
| * Dual Edge sensitive NOT USED | |
| * Level sensitive active High HIGH | |
| * Falling Edge sensitive NOT USED | |
| * Rising edge sensitive HIGH | |
| * Dual Edge sensitive HIGH | |
| */ | |
| enum pdc_irq_config_bits { | |
| PDC_LEVEL_LOW = 0b000, | |
| PDC_EDGE_FALLING = 0b010, | |
| PDC_LEVEL_HIGH = 0b100, | |
| PDC_EDGE_RISING = 0b110, | |
| PDC_EDGE_DUAL = 0b111, | |
| }; | |
| /** | |
| * qcom_pdc_gic_set_type: Configure PDC for the interrupt | |
| * | |
| * @d: the interrupt data | |
| * @type: the interrupt type | |
| * | |
| * If @type is edge triggered, forward that as Rising edge as PDC | |
| * takes care of converting falling edge to rising edge signal | |
| * If @type is level, then forward that as level high as PDC | |
| * takes care of converting falling edge to rising edge signal | |
| */ | |
| static int qcom_pdc_gic_set_type(struct irq_data *d, unsigned int type) | |
| { | |
| enum pdc_irq_config_bits pdc_type; | |
| enum pdc_irq_config_bits old_pdc_type; | |
| int ret; | |
| switch (type) { | |
| case IRQ_TYPE_EDGE_RISING: | |
| pdc_type = PDC_EDGE_RISING; | |
| break; | |
| case IRQ_TYPE_EDGE_FALLING: | |
| pdc_type = PDC_EDGE_FALLING; | |
| type = IRQ_TYPE_EDGE_RISING; | |
| break; | |
| case IRQ_TYPE_EDGE_BOTH: | |
| pdc_type = PDC_EDGE_DUAL; | |
| type = IRQ_TYPE_EDGE_RISING; | |
| break; | |
| case IRQ_TYPE_LEVEL_HIGH: | |
| pdc_type = PDC_LEVEL_HIGH; | |
| break; | |
| case IRQ_TYPE_LEVEL_LOW: | |
| pdc_type = PDC_LEVEL_LOW; | |
| type = IRQ_TYPE_LEVEL_HIGH; | |
| break; | |
| default: | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| old_pdc_type = pdc_reg_read(IRQ_i_CFG, d->hwirq); | |
| pdc_type |= (old_pdc_type & ~IRQ_i_CFG_TYPE_MASK); | |
| pdc_reg_write(IRQ_i_CFG, d->hwirq, pdc_type); | |
| ret = irq_chip_set_type_parent(d, type); | |
| if (ret) | |
| return ret; | |
| /* | |
| * When we change types the PDC can give a phantom interrupt. | |
| * Clear it. Specifically the phantom shows up when reconfiguring | |
| * polarity of interrupt without changing the state of the signal | |
| * but let's be consistent and clear it always. | |
| * | |
| * Doing this works because we have IRQCHIP_SET_TYPE_MASKED so the | |
| * interrupt will be cleared before the rest of the system sees it. | |
| */ | |
| if (old_pdc_type != pdc_type) | |
| irq_chip_set_parent_state(d, IRQCHIP_STATE_PENDING, false); | |
| return 0; | |
| } | |
| static struct irq_chip qcom_pdc_gic_chip = { | |
| .name = "PDC", | |
| .irq_eoi = irq_chip_eoi_parent, | |
| .irq_mask = irq_chip_mask_parent, | |
| .irq_unmask = irq_chip_unmask_parent, | |
| .irq_disable = qcom_pdc_gic_disable, | |
| .irq_enable = qcom_pdc_gic_enable, | |
| .irq_get_irqchip_state = irq_chip_get_parent_state, | |
| .irq_set_irqchip_state = irq_chip_set_parent_state, | |
| .irq_retrigger = irq_chip_retrigger_hierarchy, | |
| .irq_set_type = qcom_pdc_gic_set_type, | |
| .flags = IRQCHIP_MASK_ON_SUSPEND | | |
| IRQCHIP_SET_TYPE_MASKED | | |
| IRQCHIP_SKIP_SET_WAKE | | |
| IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND, | |
| .irq_set_vcpu_affinity = irq_chip_set_vcpu_affinity_parent, | |
| .irq_set_affinity = irq_chip_set_affinity_parent, | |
| }; | |
| static struct pdc_pin_region *get_pin_region(int pin) | |
| { | |
| int i; | |
| for (i = 0; i < pdc_region_cnt; i++) { | |
| if (pin >= pdc_region[i].pin_base && | |
| pin < pdc_region[i].pin_base + pdc_region[i].cnt) | |
| return &pdc_region[i]; | |
| } | |
| return NULL; | |
| } | |
| static int qcom_pdc_alloc(struct irq_domain *domain, unsigned int virq, | |
| unsigned int nr_irqs, void *data) | |
| { | |
| struct irq_fwspec *fwspec = data; | |
| struct irq_fwspec parent_fwspec; | |
| struct pdc_pin_region *region; | |
| irq_hw_number_t hwirq; | |
| unsigned int type; | |
| int ret; | |
| ret = irq_domain_translate_twocell(domain, fwspec, &hwirq, &type); | |
| if (ret) | |
| return ret; | |
| if (hwirq == GPIO_NO_WAKE_IRQ) | |
| return irq_domain_disconnect_hierarchy(domain, virq); | |
| ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq, | |
| &qcom_pdc_gic_chip, NULL); | |
| if (ret) | |
| return ret; | |
| region = get_pin_region(hwirq); | |
| if (!region) | |
| return irq_domain_disconnect_hierarchy(domain->parent, virq); | |
| if (type & IRQ_TYPE_EDGE_BOTH) | |
| type = IRQ_TYPE_EDGE_RISING; | |
| if (type & IRQ_TYPE_LEVEL_MASK) | |
| type = IRQ_TYPE_LEVEL_HIGH; | |
| parent_fwspec.fwnode = domain->parent->fwnode; | |
| parent_fwspec.param_count = 3; | |
| parent_fwspec.param[0] = 0; | |
| parent_fwspec.param[1] = pin_to_hwirq(region, hwirq); | |
| parent_fwspec.param[2] = type; | |
| return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, | |
| &parent_fwspec); | |
| } | |
| static const struct irq_domain_ops qcom_pdc_ops = { | |
| .translate = irq_domain_translate_twocell, | |
| .alloc = qcom_pdc_alloc, | |
| .free = irq_domain_free_irqs_common, | |
| }; | |
| static int pdc_setup_pin_mapping(struct device_node *np) | |
| { | |
| int ret, n, i; | |
| n = of_property_count_elems_of_size(np, "qcom,pdc-ranges", sizeof(u32)); | |
| if (n <= 0 || n % 3) | |
| return -EINVAL; | |
| pdc_region_cnt = n / 3; | |
| pdc_region = kzalloc_objs(*pdc_region, pdc_region_cnt); | |
| if (!pdc_region) { | |
| pdc_region_cnt = 0; | |
| return -ENOMEM; | |
| } | |
| for (n = 0; n < pdc_region_cnt; n++) { | |
| ret = of_property_read_u32_index(np, "qcom,pdc-ranges", | |
| n * 3 + 0, | |
| &pdc_region[n].pin_base); | |
| if (ret) | |
| return ret; | |
| ret = of_property_read_u32_index(np, "qcom,pdc-ranges", | |
| n * 3 + 1, | |
| &pdc_region[n].parent_base); | |
| if (ret) | |
| return ret; | |
| ret = of_property_read_u32_index(np, "qcom,pdc-ranges", | |
| n * 3 + 2, | |
| &pdc_region[n].cnt); | |
| if (ret) | |
| return ret; | |
| for (i = 0; i < pdc_region[n].cnt; i++) | |
| __pdc_enable_intr(i + pdc_region[n].pin_base, 0); | |
| } | |
| return 0; | |
| } | |
| static int qcom_pdc_probe(struct platform_device *pdev, struct device_node *parent) | |
| { | |
| struct irq_domain *parent_domain, *pdc_domain; | |
| struct device_node *node = pdev->dev.of_node; | |
| resource_size_t res_size; | |
| struct resource res; | |
| int ret; | |
| /* compat with old sm8150 DT which had very small region for PDC */ | |
| if (of_address_to_resource(node, 0, &res)) | |
| return -EINVAL; | |
| res_size = max_t(resource_size_t, resource_size(&res), PDC_DRV_SIZE); | |
| if (res_size > resource_size(&res)) | |
| pr_warn("%pOF: invalid reg size, please fix DT\n", node); | |
| /* | |
| * PDC has multiple DRV regions, each one provides the same set of | |
| * registers for a particular client in the system. Due to a hardware | |
| * bug on X1E, some writes to the IRQ_ENABLE_BANK register must be | |
| * issued inside the previous region. This region belongs to | |
| * a different client and is not described in the device tree. Map the | |
| * region with the expected offset to preserve support for old DTs. | |
| */ | |
| if (of_device_is_compatible(node, "qcom,x1e80100-pdc")) { | |
| pdc_prev_base = ioremap(res.start - PDC_DRV_SIZE, IRQ_ENABLE_BANK_MAX); | |
| if (!pdc_prev_base) { | |
| pr_err("%pOF: unable to map previous PDC DRV region\n", node); | |
| return -ENXIO; | |
| } | |
| pdc_x1e_quirk = true; | |
| } | |
| pdc_base = ioremap(res.start, res_size); | |
| if (!pdc_base) { | |
| pr_err("%pOF: unable to map PDC registers\n", node); | |
| ret = -ENXIO; | |
| goto fail; | |
| } | |
| pdc_version = pdc_reg_read(PDC_VERSION_REG, 0); | |
| parent_domain = irq_find_host(parent); | |
| if (!parent_domain) { | |
| pr_err("%pOF: unable to find PDC's parent domain\n", node); | |
| ret = -ENXIO; | |
| goto fail; | |
| } | |
| ret = pdc_setup_pin_mapping(node); | |
| if (ret) { | |
| pr_err("%pOF: failed to init PDC pin-hwirq mapping\n", node); | |
| goto fail; | |
| } | |
| pdc_domain = irq_domain_create_hierarchy(parent_domain, | |
| IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP, | |
| PDC_MAX_GPIO_IRQS, | |
| of_fwnode_handle(node), | |
| &qcom_pdc_ops, NULL); | |
| if (!pdc_domain) { | |
| pr_err("%pOF: PDC domain add failed\n", node); | |
| ret = -ENOMEM; | |
| goto fail; | |
| } | |
| irq_domain_update_bus_token(pdc_domain, DOMAIN_BUS_WAKEUP); | |
| return 0; | |
| fail: | |
| kfree(pdc_region); | |
| iounmap(pdc_base); | |
| iounmap(pdc_prev_base); | |
| return ret; | |
| } | |
| IRQCHIP_PLATFORM_DRIVER_BEGIN(qcom_pdc) | |
| IRQCHIP_MATCH("qcom,pdc", qcom_pdc_probe) | |
| IRQCHIP_PLATFORM_DRIVER_END(qcom_pdc) | |
| MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Power Domain Controller"); | |
| MODULE_LICENSE("GPL v2"); |