| // SPDX-License-Identifier: GPL-2.0 | |
| /* drivers/nubus/proc.c: Proc FS interface for NuBus. | |
| By David Huggins-Daines <dhd@debian.org> | |
| Much code and many ideas from drivers/pci/proc.c: | |
| Copyright (c) 1997, 1998 Martin Mares <mj@atrey.karlin.mff.cuni.cz> | |
| This is initially based on the Zorro and PCI interfaces. However, | |
| it works somewhat differently. The intent is to provide a | |
| structure in /proc analogous to the structure of the NuBus ROM | |
| resources. | |
| Therefore each board function gets a directory, which may in turn | |
| contain subdirectories. Each slot resource is a file. Unrecognized | |
| resources are empty files, since every resource ID requires a special | |
| case (e.g. if the resource ID implies a directory or block, then its | |
| value has to be interpreted as a slot ROM pointer etc.). | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/nubus.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/byteorder.h> | |
| /* | |
| * /proc/bus/nubus/devices stuff | |
| */ | |
| static int | |
| nubus_devices_proc_show(struct seq_file *m, void *v) | |
| { | |
| struct nubus_rsrc *fres; | |
| for_each_func_rsrc(fres) | |
| seq_printf(m, "%x\t%04x %04x %04x %04x\t%08lx\n", | |
| fres->board->slot, fres->category, fres->type, | |
| fres->dr_sw, fres->dr_hw, fres->board->slot_addr); | |
| return 0; | |
| } | |
| static struct proc_dir_entry *proc_bus_nubus_dir; | |
| /* | |
| * /proc/bus/nubus/x/ stuff | |
| */ | |
| struct proc_dir_entry *nubus_proc_add_board(struct nubus_board *board) | |
| { | |
| char name[2]; | |
| if (!proc_bus_nubus_dir || !nubus_populate_procfs) | |
| return NULL; | |
| snprintf(name, sizeof(name), "%x", board->slot); | |
| return proc_mkdir(name, proc_bus_nubus_dir); | |
| } | |
| /* The PDE private data for any directory under /proc/bus/nubus/x/ | |
| * is the bytelanes value for the board in slot x. | |
| */ | |
| struct proc_dir_entry *nubus_proc_add_rsrc_dir(struct proc_dir_entry *procdir, | |
| const struct nubus_dirent *ent, | |
| struct nubus_board *board) | |
| { | |
| char name[9]; | |
| int lanes = board->lanes; | |
| if (!procdir || !nubus_populate_procfs) | |
| return NULL; | |
| snprintf(name, sizeof(name), "%x", ent->type); | |
| remove_proc_subtree(name, procdir); | |
| return proc_mkdir_data(name, 0555, procdir, (void *)lanes); | |
| } | |
| /* The PDE private data for a file under /proc/bus/nubus/x/ is a pointer to | |
| * an instance of the following structure, which gives the location and size | |
| * of the resource data in the slot ROM. For slot resources which hold only a | |
| * small integer, this integer value is stored directly and size is set to 0. | |
| * A NULL private data pointer indicates an unrecognized resource. | |
| */ | |
| struct nubus_proc_pde_data { | |
| unsigned char *res_ptr; | |
| unsigned int res_size; | |
| }; | |
| static struct nubus_proc_pde_data * | |
| nubus_proc_alloc_pde_data(unsigned char *ptr, unsigned int size) | |
| { | |
| struct nubus_proc_pde_data *pded; | |
| pded = kmalloc_obj(*pded); | |
| if (!pded) | |
| return NULL; | |
| pded->res_ptr = ptr; | |
| pded->res_size = size; | |
| return pded; | |
| } | |
| static int nubus_proc_rsrc_show(struct seq_file *m, void *v) | |
| { | |
| struct inode *inode = m->private; | |
| struct nubus_proc_pde_data *pded; | |
| pded = pde_data(inode); | |
| if (!pded) | |
| return 0; | |
| if (pded->res_size > m->size) | |
| return -EFBIG; | |
| if (pded->res_size) { | |
| int lanes = (int)proc_get_parent_data(inode); | |
| struct nubus_dirent ent; | |
| if (!lanes) | |
| return 0; | |
| ent.mask = lanes; | |
| ent.base = pded->res_ptr; | |
| ent.data = 0; | |
| nubus_seq_write_rsrc_mem(m, &ent, pded->res_size); | |
| } else { | |
| unsigned int data = (unsigned int)pded->res_ptr; | |
| seq_putc(m, data >> 16); | |
| seq_putc(m, data >> 8); | |
| seq_putc(m, data >> 0); | |
| } | |
| return 0; | |
| } | |
| static int nubus_rsrc_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, nubus_proc_rsrc_show, inode); | |
| } | |
| static const struct proc_ops nubus_rsrc_proc_ops = { | |
| .proc_open = nubus_rsrc_proc_open, | |
| .proc_read = seq_read, | |
| .proc_lseek = seq_lseek, | |
| .proc_release = single_release, | |
| }; | |
| void nubus_proc_add_rsrc_mem(struct proc_dir_entry *procdir, | |
| const struct nubus_dirent *ent, | |
| unsigned int size) | |
| { | |
| char name[9]; | |
| struct nubus_proc_pde_data *pded; | |
| if (!procdir || !nubus_populate_procfs) | |
| return; | |
| snprintf(name, sizeof(name), "%x", ent->type); | |
| if (size) | |
| pded = nubus_proc_alloc_pde_data(nubus_dirptr(ent), size); | |
| else | |
| pded = NULL; | |
| remove_proc_subtree(name, procdir); | |
| proc_create_data(name, S_IFREG | 0444, procdir, | |
| &nubus_rsrc_proc_ops, pded); | |
| } | |
| void nubus_proc_add_rsrc(struct proc_dir_entry *procdir, | |
| const struct nubus_dirent *ent) | |
| { | |
| char name[9]; | |
| unsigned char *data = (unsigned char *)ent->data; | |
| if (!procdir || !nubus_populate_procfs) | |
| return; | |
| snprintf(name, sizeof(name), "%x", ent->type); | |
| remove_proc_subtree(name, procdir); | |
| proc_create_data(name, S_IFREG | 0444, procdir, | |
| &nubus_rsrc_proc_ops, | |
| nubus_proc_alloc_pde_data(data, 0)); | |
| } | |
| /* | |
| * /proc/nubus stuff | |
| */ | |
| void __init nubus_proc_init(void) | |
| { | |
| proc_create_single("nubus", 0, NULL, nubus_proc_show); | |
| proc_bus_nubus_dir = proc_mkdir("bus/nubus", NULL); | |
| if (!proc_bus_nubus_dir) | |
| return; | |
| proc_create_single("devices", 0, proc_bus_nubus_dir, | |
| nubus_devices_proc_show); | |
| } |