| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Self tests for device tree subsystem | |
| */ | |
| #define pr_fmt(fmt) "### dt-test ### " fmt | |
| #include <linux/memblock.h> | |
| #include <linux/clk.h> | |
| #include <linux/dma-direct.h> /* to test phys_to_dma/dma_to_phys */ | |
| #include <linux/err.h> | |
| #include <linux/errno.h> | |
| #include <linux/hashtable.h> | |
| #include <linux/libfdt.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_fdt.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/list.h> | |
| #include <linux/mutex.h> | |
| #include <linux/slab.h> | |
| #include <linux/device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pci.h> | |
| #include <linux/kernel.h> | |
| #include <linux/i2c.h> | |
| #include <linux/i2c-mux.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/bitops.h> | |
| #include "of_private.h" | |
| static struct unittest_results { | |
| int passed; | |
| int failed; | |
| } unittest_results; | |
| #define unittest(result, fmt, ...) ({ \ | |
| bool failed = !(result); \ | |
| if (failed) { \ | |
| unittest_results.failed++; \ | |
| pr_err("FAIL %s():%i " fmt, __func__, __LINE__, ##__VA_ARGS__); \ | |
| } else { \ | |
| unittest_results.passed++; \ | |
| pr_info("pass %s():%i\n", __func__, __LINE__); \ | |
| } \ | |
| failed; \ | |
| }) | |
| #ifdef CONFIG_OF_KOBJ | |
| #define OF_KREF_READ(NODE) kref_read(&(NODE)->kobj.kref) | |
| #else | |
| #define OF_KREF_READ(NODE) 1 | |
| #endif | |
| /* | |
| * Expected message may have a message level other than KERN_INFO. | |
| * Print the expected message only if the current loglevel will allow | |
| * the actual message to print. | |
| * | |
| * Do not use EXPECT_BEGIN(), EXPECT_END(), EXPECT_NOT_BEGIN(), or | |
| * EXPECT_NOT_END() to report messages expected to be reported or not | |
| * reported by pr_debug(). | |
| */ | |
| #define EXPECT_BEGIN(level, fmt, ...) \ | |
| printk(level pr_fmt("EXPECT \\ : ") fmt, ##__VA_ARGS__) | |
| #define EXPECT_END(level, fmt, ...) \ | |
| printk(level pr_fmt("EXPECT / : ") fmt, ##__VA_ARGS__) | |
| #define EXPECT_NOT_BEGIN(level, fmt, ...) \ | |
| printk(level pr_fmt("EXPECT_NOT \\ : ") fmt, ##__VA_ARGS__) | |
| #define EXPECT_NOT_END(level, fmt, ...) \ | |
| printk(level pr_fmt("EXPECT_NOT / : ") fmt, ##__VA_ARGS__) | |
| static void __init of_unittest_find_node_by_name(void) | |
| { | |
| struct device_node *np; | |
| const char *options, *name; | |
| np = of_find_node_by_path("/testcase-data"); | |
| name = kasprintf(GFP_KERNEL, "%pOF", np); | |
| unittest(np && name && !strcmp("/testcase-data", name), | |
| "find /testcase-data failed\n"); | |
| of_node_put(np); | |
| kfree(name); | |
| /* Test if trailing '/' works */ | |
| np = of_find_node_by_path("/testcase-data/"); | |
| unittest(!np, "trailing '/' on /testcase-data/ should fail\n"); | |
| np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); | |
| name = kasprintf(GFP_KERNEL, "%pOF", np); | |
| unittest(np && name && !strcmp("/testcase-data/phandle-tests/consumer-a", name), | |
| "find /testcase-data/phandle-tests/consumer-a failed\n"); | |
| of_node_put(np); | |
| kfree(name); | |
| np = of_find_node_by_path("testcase-alias"); | |
| name = kasprintf(GFP_KERNEL, "%pOF", np); | |
| unittest(np && name && !strcmp("/testcase-data", name), | |
| "find testcase-alias failed\n"); | |
| of_node_put(np); | |
| kfree(name); | |
| /* Test if trailing '/' works on aliases */ | |
| np = of_find_node_by_path("testcase-alias/"); | |
| unittest(!np, "trailing '/' on testcase-alias/ should fail\n"); | |
| np = of_find_node_by_path("testcase-alias/phandle-tests/consumer-a"); | |
| name = kasprintf(GFP_KERNEL, "%pOF", np); | |
| unittest(np && name && !strcmp("/testcase-data/phandle-tests/consumer-a", name), | |
| "find testcase-alias/phandle-tests/consumer-a failed\n"); | |
| of_node_put(np); | |
| kfree(name); | |
| np = of_find_node_by_path("/testcase-data/missing-path"); | |
| unittest(!np, "non-existent path returned node %pOF\n", np); | |
| of_node_put(np); | |
| np = of_find_node_by_path("missing-alias"); | |
| unittest(!np, "non-existent alias returned node %pOF\n", np); | |
| of_node_put(np); | |
| np = of_find_node_by_path("testcase-alias/missing-path"); | |
| unittest(!np, "non-existent alias with relative path returned node %pOF\n", np); | |
| of_node_put(np); | |
| np = of_find_node_opts_by_path("/testcase-data:testoption", &options); | |
| unittest(np && !strcmp("testoption", options), | |
| "option path test failed\n"); | |
| of_node_put(np); | |
| np = of_find_node_opts_by_path("/testcase-data:test/option", &options); | |
| unittest(np && !strcmp("test/option", options), | |
| "option path test, subcase #1 failed\n"); | |
| of_node_put(np); | |
| np = of_find_node_opts_by_path("/testcase-data/testcase-device1:test/option", &options); | |
| unittest(np && !strcmp("test/option", options), | |
| "option path test, subcase #2 failed\n"); | |
| of_node_put(np); | |
| np = of_find_node_opts_by_path("/testcase-data:testoption", NULL); | |
| unittest(np, "NULL option path test failed\n"); | |
| of_node_put(np); | |
| np = of_find_node_opts_by_path("testcase-alias:testaliasoption", | |
| &options); | |
| unittest(np && !strcmp("testaliasoption", options), | |
| "option alias path test failed\n"); | |
| of_node_put(np); | |
| np = of_find_node_opts_by_path("testcase-alias:test/alias/option", | |
| &options); | |
| unittest(np && !strcmp("test/alias/option", options), | |
| "option alias path test, subcase #1 failed\n"); | |
| of_node_put(np); | |
| np = of_find_node_opts_by_path("testcase-alias/phandle-tests/consumer-a:testaliasoption", | |
| &options); | |
| name = kasprintf(GFP_KERNEL, "%pOF", np); | |
| unittest(np && name && !strcmp("/testcase-data/phandle-tests/consumer-a", name) && | |
| !strcmp("testaliasoption", options), | |
| "option alias path test, subcase #2 failed\n"); | |
| of_node_put(np); | |
| kfree(name); | |
| np = of_find_node_opts_by_path("testcase-alias:testaliasoption", NULL); | |
| unittest(np, "NULL option alias path test failed\n"); | |
| of_node_put(np); | |
| options = "testoption"; | |
| np = of_find_node_opts_by_path("testcase-alias", &options); | |
| unittest(np && !options, "option clearing test failed\n"); | |
| of_node_put(np); | |
| options = "testoption"; | |
| np = of_find_node_opts_by_path("/", &options); | |
| unittest(np && !options, "option clearing root node test failed\n"); | |
| of_node_put(np); | |
| } | |
| static void __init of_unittest_dynamic(void) | |
| { | |
| struct device_node *np; | |
| struct property *prop; | |
| np = of_find_node_by_path("/testcase-data"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| /* Array of 4 properties for the purpose of testing */ | |
| prop = kzalloc_objs(*prop, 4); | |
| if (!prop) { | |
| unittest(0, "kzalloc() failed\n"); | |
| return; | |
| } | |
| /* Add a new property - should pass*/ | |
| prop->name = "new-property"; | |
| prop->value = "new-property-data"; | |
| prop->length = strlen(prop->value) + 1; | |
| unittest(of_add_property(np, prop) == 0, "Adding a new property failed\n"); | |
| /* Try to add an existing property - should fail */ | |
| prop++; | |
| prop->name = "new-property"; | |
| prop->value = "new-property-data-should-fail"; | |
| prop->length = strlen(prop->value) + 1; | |
| unittest(of_add_property(np, prop) != 0, | |
| "Adding an existing property should have failed\n"); | |
| /* Try to modify an existing property - should pass */ | |
| prop->value = "modify-property-data-should-pass"; | |
| prop->length = strlen(prop->value) + 1; | |
| unittest(of_update_property(np, prop) == 0, | |
| "Updating an existing property should have passed\n"); | |
| /* Try to modify non-existent property - should pass*/ | |
| prop++; | |
| prop->name = "modify-property"; | |
| prop->value = "modify-missing-property-data-should-pass"; | |
| prop->length = strlen(prop->value) + 1; | |
| unittest(of_update_property(np, prop) == 0, | |
| "Updating a missing property should have passed\n"); | |
| /* Remove property - should pass */ | |
| unittest(of_remove_property(np, prop) == 0, | |
| "Removing a property should have passed\n"); | |
| /* Adding very large property - should pass */ | |
| prop++; | |
| prop->name = "large-property-PAGE_SIZEx8"; | |
| prop->length = PAGE_SIZE * 8; | |
| prop->value = kzalloc(prop->length, GFP_KERNEL); | |
| unittest(prop->value != NULL, "Unable to allocate large buffer\n"); | |
| if (prop->value) | |
| unittest(of_add_property(np, prop) == 0, | |
| "Adding a large property should have passed\n"); | |
| } | |
| static int __init of_unittest_check_node_linkage(struct device_node *np) | |
| { | |
| int count = 0, rc; | |
| for_each_child_of_node_scoped(np, child) { | |
| if (child->parent != np) { | |
| pr_err("Child node %pOFn links to wrong parent %pOFn\n", | |
| child, np); | |
| return -EINVAL; | |
| } | |
| rc = of_unittest_check_node_linkage(child); | |
| if (rc < 0) | |
| return rc; | |
| count += rc; | |
| } | |
| return count + 1; | |
| } | |
| static void __init of_unittest_check_tree_linkage(void) | |
| { | |
| struct device_node *np; | |
| int allnode_count = 0, child_count; | |
| if (!of_root) | |
| return; | |
| for_each_of_allnodes(np) | |
| allnode_count++; | |
| child_count = of_unittest_check_node_linkage(of_root); | |
| unittest(child_count > 0, "Device node data structure is corrupted\n"); | |
| unittest(child_count == allnode_count, | |
| "allnodes list size (%i) doesn't match sibling lists size (%i)\n", | |
| allnode_count, child_count); | |
| pr_debug("allnodes list size (%i); sibling lists size (%i)\n", allnode_count, child_count); | |
| } | |
| static void __init of_unittest_printf_one(struct device_node *np, const char *fmt, | |
| const char *expected) | |
| { | |
| unsigned char *buf; | |
| int buf_size; | |
| int size, i; | |
| buf_size = strlen(expected) + 10; | |
| buf = kmalloc(buf_size, GFP_KERNEL); | |
| if (!buf) | |
| return; | |
| /* Baseline; check conversion with a large size limit */ | |
| memset(buf, 0xff, buf_size); | |
| size = snprintf(buf, buf_size - 2, fmt, np); | |
| /* use strcmp() instead of strncmp() here to be absolutely sure strings match */ | |
| unittest((strcmp(buf, expected) == 0) && (buf[size+1] == 0xff), | |
| "sprintf failed; fmt='%s' expected='%s' rslt='%s'\n", | |
| fmt, expected, buf); | |
| /* Make sure length limits work */ | |
| size++; | |
| for (i = 0; i < 2; i++, size--) { | |
| /* Clear the buffer, and make sure it works correctly still */ | |
| memset(buf, 0xff, buf_size); | |
| snprintf(buf, size+1, fmt, np); | |
| unittest(strncmp(buf, expected, size) == 0 && (buf[size+1] == 0xff), | |
| "snprintf failed; size=%i fmt='%s' expected='%s' rslt='%s'\n", | |
| size, fmt, expected, buf); | |
| } | |
| kfree(buf); | |
| } | |
| static void __init of_unittest_printf(void) | |
| { | |
| struct device_node *np; | |
| const char *full_name = "/testcase-data/platform-tests/test-device@1/dev@100"; | |
| char phandle_str[16] = ""; | |
| np = of_find_node_by_path(full_name); | |
| if (!np) { | |
| unittest(np, "testcase data missing\n"); | |
| return; | |
| } | |
| num_to_str(phandle_str, sizeof(phandle_str), np->phandle, 0); | |
| of_unittest_printf_one(np, "%pOF", full_name); | |
| of_unittest_printf_one(np, "%pOFf", full_name); | |
| of_unittest_printf_one(np, "%pOFn", "dev"); | |
| of_unittest_printf_one(np, "%2pOFn", "dev"); | |
| of_unittest_printf_one(np, "%5pOFn", " dev"); | |
| of_unittest_printf_one(np, "%pOFnc", "dev:test-sub-device"); | |
| of_unittest_printf_one(np, "%pOFp", phandle_str); | |
| of_unittest_printf_one(np, "%pOFP", "dev@100"); | |
| of_unittest_printf_one(np, "ABC %pOFP ABC", "ABC dev@100 ABC"); | |
| of_unittest_printf_one(np, "%10pOFP", " dev@100"); | |
| of_unittest_printf_one(np, "%-10pOFP", "dev@100 "); | |
| of_unittest_printf_one(of_root, "%pOFP", "/"); | |
| of_unittest_printf_one(np, "%pOFF", "----"); | |
| of_unittest_printf_one(np, "%pOFPF", "dev@100:----"); | |
| of_unittest_printf_one(np, "%pOFPFPc", "dev@100:----:dev@100:test-sub-device"); | |
| of_unittest_printf_one(np, "%pOFc", "test-sub-device"); | |
| of_unittest_printf_one(np, "%pOFC", | |
| "\"test-sub-device\",\"test-compat2\",\"test-compat3\""); | |
| } | |
| struct node_hash { | |
| struct hlist_node node; | |
| struct device_node *np; | |
| }; | |
| static DEFINE_HASHTABLE(phandle_ht, 8); | |
| static void __init of_unittest_check_phandles(void) | |
| { | |
| struct device_node *np; | |
| struct node_hash *nh; | |
| struct hlist_node *tmp; | |
| int i, dup_count = 0, phandle_count = 0; | |
| for_each_of_allnodes(np) { | |
| if (!np->phandle) | |
| continue; | |
| hash_for_each_possible(phandle_ht, nh, node, np->phandle) { | |
| if (nh->np->phandle == np->phandle) { | |
| pr_info("Duplicate phandle! %i used by %pOF and %pOF\n", | |
| np->phandle, nh->np, np); | |
| dup_count++; | |
| break; | |
| } | |
| } | |
| nh = kzalloc_obj(*nh); | |
| if (!nh) | |
| return; | |
| nh->np = np; | |
| hash_add(phandle_ht, &nh->node, np->phandle); | |
| phandle_count++; | |
| } | |
| unittest(dup_count == 0, "Found %i duplicates in %i phandles\n", | |
| dup_count, phandle_count); | |
| /* Clean up */ | |
| hash_for_each_safe(phandle_ht, i, tmp, nh, node) { | |
| hash_del(&nh->node); | |
| kfree(nh); | |
| } | |
| } | |
| static void __init of_unittest_parse_phandle_with_args(void) | |
| { | |
| struct device_node *np; | |
| struct of_phandle_args args; | |
| int i, rc; | |
| np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| rc = of_count_phandle_with_args(np, "phandle-list", "#phandle-cells"); | |
| unittest(rc == 7, "of_count_phandle_with_args() returned %i, expected 7\n", rc); | |
| for (i = 0; i < 8; i++) { | |
| bool passed = true; | |
| memset(&args, 0, sizeof(args)); | |
| rc = of_parse_phandle_with_args(np, "phandle-list", | |
| "#phandle-cells", i, &args); | |
| /* Test the values from tests-phandle.dtsi */ | |
| switch (i) { | |
| case 0: | |
| passed &= !rc; | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == (i + 1)); | |
| break; | |
| case 1: | |
| passed &= !rc; | |
| passed &= (args.args_count == 2); | |
| passed &= (args.args[0] == (i + 1)); | |
| passed &= (args.args[1] == 0); | |
| break; | |
| case 2: | |
| passed &= (rc == -ENOENT); | |
| break; | |
| case 3: | |
| passed &= !rc; | |
| passed &= (args.args_count == 3); | |
| passed &= (args.args[0] == (i + 1)); | |
| passed &= (args.args[1] == 4); | |
| passed &= (args.args[2] == 3); | |
| break; | |
| case 4: | |
| passed &= !rc; | |
| passed &= (args.args_count == 2); | |
| passed &= (args.args[0] == (i + 1)); | |
| passed &= (args.args[1] == 100); | |
| break; | |
| case 5: | |
| passed &= !rc; | |
| passed &= (args.args_count == 0); | |
| break; | |
| case 6: | |
| passed &= !rc; | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == (i + 1)); | |
| break; | |
| case 7: | |
| passed &= (rc == -ENOENT); | |
| break; | |
| default: | |
| passed = false; | |
| } | |
| unittest(passed, "index %i - data error on node %pOF rc=%i\n", | |
| i, args.np, rc); | |
| if (rc == 0) | |
| of_node_put(args.np); | |
| } | |
| /* Check for missing list property */ | |
| memset(&args, 0, sizeof(args)); | |
| rc = of_parse_phandle_with_args(np, "phandle-list-missing", | |
| "#phandle-cells", 0, &args); | |
| unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc); | |
| rc = of_count_phandle_with_args(np, "phandle-list-missing", | |
| "#phandle-cells"); | |
| unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc); | |
| /* Check for missing cells property */ | |
| memset(&args, 0, sizeof(args)); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1"); | |
| rc = of_parse_phandle_with_args(np, "phandle-list", | |
| "#phandle-cells-missing", 0, &args); | |
| EXPECT_END(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1"); | |
| unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1"); | |
| rc = of_count_phandle_with_args(np, "phandle-list", | |
| "#phandle-cells-missing"); | |
| EXPECT_END(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1"); | |
| unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | |
| /* Check for bad phandle in list */ | |
| memset(&args, 0, sizeof(args)); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle"); | |
| rc = of_parse_phandle_with_args(np, "phandle-list-bad-phandle", | |
| "#phandle-cells", 0, &args); | |
| EXPECT_END(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle"); | |
| unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle"); | |
| rc = of_count_phandle_with_args(np, "phandle-list-bad-phandle", | |
| "#phandle-cells"); | |
| EXPECT_END(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle"); | |
| unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | |
| /* Check for incorrectly formed argument list */ | |
| memset(&args, 0, sizeof(args)); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1"); | |
| rc = of_parse_phandle_with_args(np, "phandle-list-bad-args", | |
| "#phandle-cells", 1, &args); | |
| EXPECT_END(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1"); | |
| unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1"); | |
| rc = of_count_phandle_with_args(np, "phandle-list-bad-args", | |
| "#phandle-cells"); | |
| EXPECT_END(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found 1"); | |
| unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | |
| } | |
| static void __init of_unittest_parse_phandle_with_args_map(void) | |
| { | |
| struct device_node *np, *p[6] = {}; | |
| struct of_phandle_args args; | |
| unsigned int prefs[6]; | |
| int i, rc; | |
| np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-b"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| p[0] = of_find_node_by_path("/testcase-data/phandle-tests/provider0"); | |
| p[1] = of_find_node_by_path("/testcase-data/phandle-tests/provider1"); | |
| p[2] = of_find_node_by_path("/testcase-data/phandle-tests/provider2"); | |
| p[3] = of_find_node_by_path("/testcase-data/phandle-tests/provider3"); | |
| p[4] = of_find_node_by_path("/testcase-data/phandle-tests/provider4"); | |
| p[5] = of_find_node_by_path("/testcase-data/phandle-tests/provider5"); | |
| for (i = 0; i < ARRAY_SIZE(p); ++i) { | |
| if (!p[i]) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| prefs[i] = OF_KREF_READ(p[i]); | |
| } | |
| rc = of_count_phandle_with_args(np, "phandle-list", "#phandle-cells"); | |
| unittest(rc == 8, "of_count_phandle_with_args() returned %i, expected 8\n", rc); | |
| for (i = 0; i < 9; i++) { | |
| bool passed = true; | |
| memset(&args, 0, sizeof(args)); | |
| rc = of_parse_phandle_with_args_map(np, "phandle-list", | |
| "phandle", i, &args); | |
| /* Test the values from tests-phandle.dtsi */ | |
| switch (i) { | |
| case 0: | |
| passed &= !rc; | |
| passed &= (args.np == p[1]); | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == 1); | |
| break; | |
| case 1: | |
| passed &= !rc; | |
| passed &= (args.np == p[3]); | |
| passed &= (args.args_count == 3); | |
| passed &= (args.args[0] == 2); | |
| passed &= (args.args[1] == 5); | |
| passed &= (args.args[2] == 3); | |
| break; | |
| case 2: | |
| passed &= (rc == -ENOENT); | |
| break; | |
| case 3: | |
| passed &= !rc; | |
| passed &= (args.np == p[0]); | |
| passed &= (args.args_count == 0); | |
| break; | |
| case 4: | |
| passed &= !rc; | |
| passed &= (args.np == p[1]); | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == 3); | |
| break; | |
| case 5: | |
| passed &= !rc; | |
| passed &= (args.np == p[0]); | |
| passed &= (args.args_count == 0); | |
| break; | |
| case 6: | |
| passed &= !rc; | |
| passed &= (args.np == p[2]); | |
| passed &= (args.args_count == 2); | |
| passed &= (args.args[0] == 15); | |
| passed &= (args.args[1] == 0x20); | |
| break; | |
| case 7: | |
| passed &= !rc; | |
| passed &= (args.np == p[3]); | |
| passed &= (args.args_count == 3); | |
| passed &= (args.args[0] == 2); | |
| passed &= (args.args[1] == 5); | |
| passed &= (args.args[2] == 3); | |
| break; | |
| case 8: | |
| passed &= (rc == -ENOENT); | |
| break; | |
| default: | |
| passed = false; | |
| } | |
| unittest(passed, "index %i - data error on node %s rc=%i\n", | |
| i, args.np->full_name, rc); | |
| if (rc == 0) | |
| of_node_put(args.np); | |
| } | |
| /* Check for missing list property */ | |
| memset(&args, 0, sizeof(args)); | |
| rc = of_parse_phandle_with_args_map(np, "phandle-list-missing", | |
| "phandle", 0, &args); | |
| unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc); | |
| /* Check for missing cells,map,mask property */ | |
| memset(&args, 0, sizeof(args)); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1"); | |
| rc = of_parse_phandle_with_args_map(np, "phandle-list", | |
| "phandle-missing", 0, &args); | |
| EXPECT_END(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1"); | |
| unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | |
| /* Check for bad phandle in list */ | |
| memset(&args, 0, sizeof(args)); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-b: could not find phandle 12345678"); | |
| rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-phandle", | |
| "phandle", 0, &args); | |
| EXPECT_END(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-b: could not find phandle 12345678"); | |
| unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | |
| /* Check for incorrectly formed argument list */ | |
| memset(&args, 0, sizeof(args)); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1"); | |
| rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-args", | |
| "phandle", 1, &args); | |
| EXPECT_END(KERN_INFO, | |
| "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found 1"); | |
| unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | |
| for (i = 0; i < ARRAY_SIZE(p); ++i) { | |
| unittest(prefs[i] == OF_KREF_READ(p[i]), | |
| "provider%d: expected:%d got:%d\n", | |
| i, prefs[i], OF_KREF_READ(p[i])); | |
| of_node_put(p[i]); | |
| } | |
| } | |
| static void __init of_unittest_property_string(void) | |
| { | |
| const char *strings[4]; | |
| const struct property *prop; | |
| struct device_node *np; | |
| int rc; | |
| np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); | |
| if (!np) { | |
| pr_err("No testcase data in device tree\n"); | |
| return; | |
| } | |
| rc = of_property_match_string(np, "phandle-list-names", "first"); | |
| unittest(rc == 0, "first expected:0 got:%i\n", rc); | |
| rc = of_property_match_string(np, "phandle-list-names", "second"); | |
| unittest(rc == 1, "second expected:1 got:%i\n", rc); | |
| rc = of_property_match_string(np, "phandle-list-names", "third"); | |
| unittest(rc == 2, "third expected:2 got:%i\n", rc); | |
| rc = of_property_match_string(np, "phandle-list-names", "fourth"); | |
| unittest(rc == -ENODATA, "unmatched string; rc=%i\n", rc); | |
| rc = of_property_match_string(np, "missing-property", "blah"); | |
| unittest(rc == -EINVAL, "missing property; rc=%i\n", rc); | |
| rc = of_property_match_string(np, "empty-property", "blah"); | |
| unittest(rc == -ENODATA, "empty property; rc=%i\n", rc); | |
| rc = of_property_match_string(np, "unterminated-string", "blah"); | |
| unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); | |
| /* of_property_count_strings() tests */ | |
| rc = of_property_count_strings(np, "string-property"); | |
| unittest(rc == 1, "Incorrect string count; rc=%i\n", rc); | |
| rc = of_property_count_strings(np, "phandle-list-names"); | |
| unittest(rc == 3, "Incorrect string count; rc=%i\n", rc); | |
| rc = of_property_count_strings(np, "unterminated-string"); | |
| unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); | |
| rc = of_property_count_strings(np, "unterminated-string-list"); | |
| unittest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc); | |
| /* of_property_read_string_index() tests */ | |
| rc = of_property_read_string_index(np, "string-property", 0, strings); | |
| unittest(rc == 0 && !strcmp(strings[0], "foobar"), "of_property_read_string_index() failure; rc=%i\n", rc); | |
| strings[0] = NULL; | |
| rc = of_property_read_string_index(np, "string-property", 1, strings); | |
| unittest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); | |
| rc = of_property_read_string_index(np, "phandle-list-names", 0, strings); | |
| unittest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc); | |
| rc = of_property_read_string_index(np, "phandle-list-names", 1, strings); | |
| unittest(rc == 0 && !strcmp(strings[0], "second"), "of_property_read_string_index() failure; rc=%i\n", rc); | |
| rc = of_property_read_string_index(np, "phandle-list-names", 2, strings); | |
| unittest(rc == 0 && !strcmp(strings[0], "third"), "of_property_read_string_index() failure; rc=%i\n", rc); | |
| strings[0] = NULL; | |
| rc = of_property_read_string_index(np, "phandle-list-names", 3, strings); | |
| unittest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); | |
| strings[0] = NULL; | |
| rc = of_property_read_string_index(np, "unterminated-string", 0, strings); | |
| unittest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); | |
| rc = of_property_read_string_index(np, "unterminated-string-list", 0, strings); | |
| unittest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc); | |
| strings[0] = NULL; | |
| rc = of_property_read_string_index(np, "unterminated-string-list", 2, strings); /* should fail */ | |
| unittest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); | |
| strings[1] = NULL; | |
| /* of_property_read_string_array() tests */ | |
| rc = of_property_read_string_array(np, "string-property", strings, 4); | |
| unittest(rc == 1, "Incorrect string count; rc=%i\n", rc); | |
| rc = of_property_read_string_array(np, "phandle-list-names", strings, 4); | |
| unittest(rc == 3, "Incorrect string count; rc=%i\n", rc); | |
| rc = of_property_read_string_array(np, "unterminated-string", strings, 4); | |
| unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); | |
| /* -- An incorrectly formed string should cause a failure */ | |
| rc = of_property_read_string_array(np, "unterminated-string-list", strings, 4); | |
| unittest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc); | |
| /* -- parsing the correctly formed strings should still work: */ | |
| strings[2] = NULL; | |
| rc = of_property_read_string_array(np, "unterminated-string-list", strings, 2); | |
| unittest(rc == 2 && strings[2] == NULL, "of_property_read_string_array() failure; rc=%i\n", rc); | |
| strings[1] = NULL; | |
| rc = of_property_read_string_array(np, "phandle-list-names", strings, 1); | |
| unittest(rc == 1 && strings[1] == NULL, "Overwrote end of string array; rc=%i, str='%s'\n", rc, strings[1]); | |
| /* of_prop_next_string() tests */ | |
| prop = of_find_property(np, "phandle-list-names", NULL); | |
| strings[0] = of_prop_next_string(prop, NULL); | |
| unittest(strings[0] && !strcmp(strings[0], "first"), | |
| "of_prop_next_string() failure; got '%s'\n", strings[0]); | |
| strings[0] = of_prop_next_string(prop, strings[0]); | |
| unittest(strings[0] && !strcmp(strings[0], "second"), | |
| "of_prop_next_string() failure; got '%s'\n", strings[0]); | |
| strings[0] = of_prop_next_string(prop, strings[0]); | |
| unittest(strings[0] && !strcmp(strings[0], "third"), | |
| "of_prop_next_string() failure; got '%s'\n", strings[0]); | |
| strings[0] = of_prop_next_string(prop, strings[0]); | |
| unittest(!strings[0], | |
| "of_prop_next_string() should return NULL at end of list\n"); | |
| prop = of_find_property(np, "unterminated-string", NULL); | |
| strings[0] = of_prop_next_string(prop, NULL); | |
| unittest(!strings[0], | |
| "of_prop_next_string() should reject unterminated first string\n"); | |
| prop = of_find_property(np, "unterminated-string-list", NULL); | |
| strings[0] = of_prop_next_string(prop, NULL); | |
| unittest(strings[0] && !strcmp(strings[0], "first"), | |
| "of_prop_next_string() failure; got '%s'\n", strings[0]); | |
| strings[0] = of_prop_next_string(prop, strings[0]); | |
| unittest(strings[0] && !strcmp(strings[0], "second"), | |
| "of_prop_next_string() failure; got '%s'\n", strings[0]); | |
| strings[0] = of_prop_next_string(prop, strings[0]); | |
| unittest(!strings[0], | |
| "of_prop_next_string() should reject unterminated trailing string\n"); | |
| } | |
| #define propcmp(p1, p2) (((p1)->length == (p2)->length) && \ | |
| (p1)->value && (p2)->value && \ | |
| !memcmp((p1)->value, (p2)->value, (p1)->length) && \ | |
| !strcmp((p1)->name, (p2)->name)) | |
| static void __init of_unittest_property_copy(void) | |
| { | |
| #ifdef CONFIG_OF_DYNAMIC | |
| struct property p1 = { .name = "p1", .length = 0, .value = "" }; | |
| struct property p2 = { .name = "p2", .length = 5, .value = "abcd" }; | |
| struct property *new; | |
| new = __of_prop_dup(&p1, GFP_KERNEL); | |
| unittest(new && propcmp(&p1, new), "empty property didn't copy correctly\n"); | |
| if (new) | |
| __of_prop_free(new); | |
| new = __of_prop_dup(&p2, GFP_KERNEL); | |
| unittest(new && propcmp(&p2, new), "non-empty property didn't copy correctly\n"); | |
| if (new) | |
| __of_prop_free(new); | |
| #endif | |
| } | |
| static void __init of_unittest_changeset(void) | |
| { | |
| #ifdef CONFIG_OF_DYNAMIC | |
| int ret; | |
| struct property *ppadd, padd = { .name = "prop-add", .length = 1, .value = "" }; | |
| struct property *ppname_n1, pname_n1 = { .name = "name", .length = 3, .value = "n1" }; | |
| struct property *ppname_n2, pname_n2 = { .name = "name", .length = 3, .value = "n2" }; | |
| struct property *ppname_n21, pname_n21 = { .name = "name", .length = 3, .value = "n21" }; | |
| struct property *ppupdate, pupdate = { .name = "prop-update", .length = 5, .value = "abcd" }; | |
| struct property *ppremove; | |
| struct device_node *n1, *n2, *n21, *n22, *nchangeset, *nremove, *parent, *np; | |
| static const char * const str_array[] = { "str1", "str2", "str3" }; | |
| const u32 u32_array[] = { 1, 2, 3 }; | |
| struct of_changeset chgset; | |
| const char *propstr = NULL; | |
| n1 = __of_node_dup(NULL, "n1"); | |
| unittest(n1, "testcase setup failure\n"); | |
| n2 = __of_node_dup(NULL, "n2"); | |
| unittest(n2, "testcase setup failure\n"); | |
| n21 = __of_node_dup(NULL, "n21"); | |
| unittest(n21, "testcase setup failure %p\n", n21); | |
| nchangeset = of_find_node_by_path("/testcase-data/changeset"); | |
| nremove = of_get_child_by_name(nchangeset, "node-remove"); | |
| unittest(nremove, "testcase setup failure\n"); | |
| ppadd = __of_prop_dup(&padd, GFP_KERNEL); | |
| unittest(ppadd, "testcase setup failure\n"); | |
| ppname_n1 = __of_prop_dup(&pname_n1, GFP_KERNEL); | |
| unittest(ppname_n1, "testcase setup failure\n"); | |
| ppname_n2 = __of_prop_dup(&pname_n2, GFP_KERNEL); | |
| unittest(ppname_n2, "testcase setup failure\n"); | |
| ppname_n21 = __of_prop_dup(&pname_n21, GFP_KERNEL); | |
| unittest(ppname_n21, "testcase setup failure\n"); | |
| ppupdate = __of_prop_dup(&pupdate, GFP_KERNEL); | |
| unittest(ppupdate, "testcase setup failure\n"); | |
| parent = nchangeset; | |
| n1->parent = parent; | |
| n2->parent = parent; | |
| n21->parent = n2; | |
| ppremove = of_find_property(parent, "prop-remove", NULL); | |
| unittest(ppremove, "failed to find removal prop"); | |
| of_changeset_init(&chgset); | |
| unittest(!of_changeset_attach_node(&chgset, n1), "fail attach n1\n"); | |
| unittest(!of_changeset_add_property(&chgset, n1, ppname_n1), "fail add prop name\n"); | |
| unittest(!of_changeset_attach_node(&chgset, n2), "fail attach n2\n"); | |
| unittest(!of_changeset_add_property(&chgset, n2, ppname_n2), "fail add prop name\n"); | |
| unittest(!of_changeset_detach_node(&chgset, nremove), "fail remove node\n"); | |
| unittest(!of_changeset_add_property(&chgset, n21, ppname_n21), "fail add prop name\n"); | |
| unittest(!of_changeset_attach_node(&chgset, n21), "fail attach n21\n"); | |
| unittest(!of_changeset_add_property(&chgset, parent, ppadd), "fail add prop prop-add\n"); | |
| unittest(!of_changeset_update_property(&chgset, parent, ppupdate), "fail update prop\n"); | |
| unittest(!of_changeset_remove_property(&chgset, parent, ppremove), "fail remove prop\n"); | |
| n22 = of_changeset_create_node(&chgset, n2, "n22"); | |
| unittest(n22, "fail create n22\n"); | |
| unittest(!of_changeset_add_prop_string(&chgset, n22, "prop-str", "abcd"), | |
| "fail add prop prop-str"); | |
| unittest(!of_changeset_add_prop_string_array(&chgset, n22, "prop-str-array", | |
| (const char **)str_array, | |
| ARRAY_SIZE(str_array)), | |
| "fail add prop prop-str-array"); | |
| unittest(!of_changeset_add_prop_u32_array(&chgset, n22, "prop-u32-array", | |
| u32_array, ARRAY_SIZE(u32_array)), | |
| "fail add prop prop-u32-array"); | |
| unittest(!of_changeset_apply(&chgset), "apply failed\n"); | |
| /* Make sure node names are constructed correctly */ | |
| unittest((np = of_find_node_by_path("/testcase-data/changeset/n2/n21")), | |
| "'%pOF' not added\n", n21); | |
| of_node_put(np); | |
| unittest((np = of_find_node_by_path("/testcase-data/changeset/n2/n22")), | |
| "'%pOF' not added\n", n22); | |
| of_node_put(np); | |
| unittest(!of_changeset_revert(&chgset), "revert failed\n"); | |
| unittest(!of_find_node_by_path("/testcase-data/changeset/n2/n21"), | |
| "'%pOF' still present after revert\n", n21); | |
| unittest(of_property_present(parent, "prop-remove"), | |
| "failed to find removed prop after revert\n"); | |
| ret = of_property_read_string(parent, "prop-update", &propstr); | |
| unittest(!ret, "failed to find updated prop after revert\n"); | |
| if (!ret) | |
| unittest(strcmp(propstr, "hello") == 0, "original value not in updated property after revert"); | |
| of_node_put(nchangeset); | |
| of_changeset_destroy(&chgset); | |
| of_node_put(n1); | |
| of_node_put(n2); | |
| of_node_put(n21); | |
| of_node_put(n22); | |
| #endif | |
| } | |
| static void __init __maybe_unused changeset_check_string(struct device_node *np, | |
| const char *prop_name, | |
| const char *expected_str) | |
| { | |
| const char *str; | |
| int ret; | |
| ret = of_property_read_string(np, prop_name, &str); | |
| if (unittest(ret == 0, "failed to read %s\n", prop_name)) | |
| return; | |
| unittest(strcmp(str, expected_str) == 0, | |
| "%s value mismatch (read '%s', exp '%s')\n", | |
| prop_name, str, expected_str); | |
| } | |
| static void __init __maybe_unused changeset_check_string_array(struct device_node *np, | |
| const char *prop_name, | |
| const char * const *expected_array, | |
| unsigned int count) | |
| { | |
| const char *str; | |
| unsigned int i; | |
| int ret; | |
| int cnt; | |
| cnt = of_property_count_strings(np, prop_name); | |
| if (unittest(cnt >= 0, "failed to get %s count\n", prop_name)) | |
| return; | |
| if (unittest(cnt == count, | |
| "%s count mismatch (read %d, exp %u)\n", | |
| prop_name, cnt, count)) | |
| return; | |
| for (i = 0; i < count; i++) { | |
| ret = of_property_read_string_index(np, prop_name, i, &str); | |
| if (unittest(ret == 0, "failed to read %s[%d]\n", prop_name, i)) | |
| continue; | |
| unittest(strcmp(str, expected_array[i]) == 0, | |
| "%s[%d] value mismatch (read '%s', exp '%s')\n", | |
| prop_name, i, str, expected_array[i]); | |
| } | |
| } | |
| static void __init __maybe_unused changeset_check_u32(struct device_node *np, | |
| const char *prop_name, | |
| u32 expected_u32) | |
| { | |
| u32 val32; | |
| int ret; | |
| ret = of_property_read_u32(np, prop_name, &val32); | |
| if (unittest(ret == 0, "failed to read %s\n", prop_name)) | |
| return; | |
| unittest(val32 == expected_u32, | |
| "%s value mismatch (read '%u', exp '%u')\n", | |
| prop_name, val32, expected_u32); | |
| } | |
| static void __init __maybe_unused changeset_check_u32_array(struct device_node *np, | |
| const char *prop_name, | |
| const u32 *expected_array, | |
| unsigned int count) | |
| { | |
| unsigned int i; | |
| u32 val32; | |
| int ret; | |
| int cnt; | |
| cnt = of_property_count_u32_elems(np, prop_name); | |
| if (unittest(cnt >= 0, "failed to get %s count\n", prop_name)) | |
| return; | |
| if (unittest(cnt == count, | |
| "%s count mismatch (read %d, exp %u)\n", | |
| prop_name, cnt, count)) | |
| return; | |
| for (i = 0; i < count; i++) { | |
| ret = of_property_read_u32_index(np, prop_name, i, &val32); | |
| if (unittest(ret == 0, "failed to read %s[%d]\n", prop_name, i)) | |
| continue; | |
| unittest(val32 == expected_array[i], | |
| "%s[%d] value mismatch (read '%u', exp '%u')\n", | |
| prop_name, i, val32, expected_array[i]); | |
| } | |
| } | |
| static void __init __maybe_unused changeset_check_bool(struct device_node *np, | |
| const char *prop_name) | |
| { | |
| unittest(of_property_read_bool(np, prop_name), | |
| "%s value mismatch (read 'false', exp 'true')\n", prop_name); | |
| } | |
| static void __init of_unittest_changeset_prop(void) | |
| { | |
| #ifdef CONFIG_OF_DYNAMIC | |
| static const char * const str_array[] = { "abc", "defg", "hij" }; | |
| static const u32 u32_array[] = { 123, 4567, 89, 10, 11 }; | |
| struct device_node *nchangeset, *np; | |
| struct of_changeset chgset; | |
| int ret; | |
| nchangeset = of_find_node_by_path("/testcase-data/changeset"); | |
| if (!nchangeset) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| of_changeset_init(&chgset); | |
| np = of_changeset_create_node(&chgset, nchangeset, "test-prop"); | |
| if (unittest(np, "failed to create test-prop node\n")) | |
| goto end_changeset_destroy; | |
| ret = of_changeset_add_prop_string(&chgset, np, "prop-string", "abcde"); | |
| unittest(ret == 0, "failed to add prop-string\n"); | |
| ret = of_changeset_add_prop_string_array(&chgset, np, "prop-string-array", | |
| str_array, ARRAY_SIZE(str_array)); | |
| unittest(ret == 0, "failed to add prop-string-array\n"); | |
| ret = of_changeset_add_prop_u32(&chgset, np, "prop-u32", 1234); | |
| unittest(ret == 0, "failed to add prop-u32\n"); | |
| ret = of_changeset_add_prop_u32_array(&chgset, np, "prop-u32-array", | |
| u32_array, ARRAY_SIZE(u32_array)); | |
| unittest(ret == 0, "failed to add prop-u32-array\n"); | |
| ret = of_changeset_add_prop_bool(&chgset, np, "prop-bool"); | |
| unittest(ret == 0, "failed to add prop-bool\n"); | |
| of_node_put(np); | |
| ret = of_changeset_apply(&chgset); | |
| if (unittest(ret == 0, "failed to apply changeset\n")) | |
| goto end_changeset_destroy; | |
| np = of_find_node_by_path("/testcase-data/changeset/test-prop"); | |
| if (unittest(np, "failed to find test-prop node\n")) | |
| goto end_revert_changeset; | |
| changeset_check_string(np, "prop-string", "abcde"); | |
| changeset_check_string_array(np, "prop-string-array", str_array, ARRAY_SIZE(str_array)); | |
| changeset_check_u32(np, "prop-u32", 1234); | |
| changeset_check_u32_array(np, "prop-u32-array", u32_array, ARRAY_SIZE(u32_array)); | |
| changeset_check_bool(np, "prop-bool"); | |
| of_node_put(np); | |
| end_revert_changeset: | |
| ret = of_changeset_revert(&chgset); | |
| unittest(ret == 0, "failed to revert changeset\n"); | |
| end_changeset_destroy: | |
| of_changeset_destroy(&chgset); | |
| of_node_put(nchangeset); | |
| #endif | |
| } | |
| static void __init of_unittest_dma_get_max_cpu_address(void) | |
| { | |
| struct device_node *np; | |
| phys_addr_t cpu_addr; | |
| if (!IS_ENABLED(CONFIG_OF_ADDRESS)) | |
| return; | |
| np = of_find_node_by_path("/testcase-data/address-tests"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| cpu_addr = of_dma_get_max_cpu_address(np); | |
| unittest(cpu_addr == 0x4fffffff, | |
| "of_dma_get_max_cpu_address: wrong CPU addr %pad (expecting %x)\n", | |
| &cpu_addr, 0x4fffffff); | |
| } | |
| static void __init of_unittest_dma_ranges_one(const char *path, | |
| u64 expect_dma_addr, u64 expect_paddr) | |
| { | |
| #ifdef CONFIG_HAS_DMA | |
| struct device_node *np; | |
| const struct bus_dma_region *map = NULL; | |
| int rc; | |
| np = of_find_node_by_path(path); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| rc = of_dma_get_range(np, &map); | |
| unittest(!rc, "of_dma_get_range failed on node %pOF rc=%i\n", np, rc); | |
| if (!rc) { | |
| phys_addr_t paddr; | |
| dma_addr_t dma_addr; | |
| struct device *dev_bogus; | |
| dev_bogus = kzalloc_obj(struct device); | |
| if (!dev_bogus) { | |
| unittest(0, "kzalloc() failed\n"); | |
| kfree(map); | |
| return; | |
| } | |
| dev_bogus->dma_range_map = map; | |
| paddr = dma_to_phys(dev_bogus, expect_dma_addr); | |
| dma_addr = phys_to_dma(dev_bogus, expect_paddr); | |
| unittest(paddr == expect_paddr, | |
| "of_dma_get_range: wrong phys addr %pap (expecting %llx) on node %pOF\n", | |
| &paddr, expect_paddr, np); | |
| unittest(dma_addr == expect_dma_addr, | |
| "of_dma_get_range: wrong DMA addr %pad (expecting %llx) on node %pOF\n", | |
| &dma_addr, expect_dma_addr, np); | |
| kfree(map); | |
| kfree(dev_bogus); | |
| } | |
| of_node_put(np); | |
| #endif | |
| } | |
| static void __init of_unittest_parse_dma_ranges(void) | |
| { | |
| of_unittest_dma_ranges_one("/testcase-data/address-tests/device@70000000", | |
| 0x0, 0x20000000); | |
| if (IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT)) | |
| of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000", | |
| 0x100000000, 0x20000000); | |
| of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000", | |
| 0x80000000, 0x20000000); | |
| } | |
| static void __init of_unittest_pci_dma_ranges(void) | |
| { | |
| struct device_node *np; | |
| struct of_pci_range range; | |
| struct of_pci_range_parser parser; | |
| int i = 0; | |
| if (!IS_ENABLED(CONFIG_PCI)) | |
| return; | |
| np = of_find_node_by_path("/testcase-data/address-tests/pci@90000000"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| if (of_pci_dma_range_parser_init(&parser, np)) { | |
| pr_err("missing dma-ranges property\n"); | |
| return; | |
| } | |
| /* | |
| * Get the dma-ranges from the device tree | |
| */ | |
| for_each_of_pci_range(&parser, &range) { | |
| if (!i) { | |
| unittest(range.size == 0x10000000, | |
| "for_each_of_pci_range wrong size on node %pOF size=%llx\n", | |
| np, range.size); | |
| unittest(range.cpu_addr == 0x20000000, | |
| "for_each_of_pci_range wrong CPU addr (%llx) on node %pOF", | |
| range.cpu_addr, np); | |
| unittest(range.pci_addr == 0x80000000, | |
| "for_each_of_pci_range wrong DMA addr (%llx) on node %pOF", | |
| range.pci_addr, np); | |
| } else { | |
| unittest(range.size == 0x10000000, | |
| "for_each_of_pci_range wrong size on node %pOF size=%llx\n", | |
| np, range.size); | |
| unittest(range.cpu_addr == 0x40000000, | |
| "for_each_of_pci_range wrong CPU addr (%llx) on node %pOF", | |
| range.cpu_addr, np); | |
| unittest(range.pci_addr == 0xc0000000, | |
| "for_each_of_pci_range wrong DMA addr (%llx) on node %pOF", | |
| range.pci_addr, np); | |
| } | |
| i++; | |
| } | |
| of_node_put(np); | |
| } | |
| static void __init of_unittest_pci_empty_dma_ranges(void) | |
| { | |
| struct device_node *np; | |
| struct of_pci_range range; | |
| struct of_pci_range_parser parser; | |
| if (!IS_ENABLED(CONFIG_PCI)) | |
| return; | |
| np = of_find_node_by_path("/testcase-data/address-tests2/pcie@d1070000/pci@0,0/dev@0,0/local-bus@0"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| if (of_pci_dma_range_parser_init(&parser, np)) { | |
| pr_err("missing dma-ranges property\n"); | |
| return; | |
| } | |
| /* | |
| * Get the dma-ranges from the device tree | |
| */ | |
| for_each_of_pci_range(&parser, &range) { | |
| unittest(range.size == 0x10000000, | |
| "for_each_of_pci_range wrong size on node %pOF size=%llx\n", | |
| np, range.size); | |
| unittest(range.cpu_addr == 0x00000000, | |
| "for_each_of_pci_range wrong CPU addr (%llx) on node %pOF", | |
| range.cpu_addr, np); | |
| unittest(range.pci_addr == 0xc0000000, | |
| "for_each_of_pci_range wrong DMA addr (%llx) on node %pOF", | |
| range.pci_addr, np); | |
| } | |
| of_node_put(np); | |
| } | |
| static void __init of_unittest_bus_ranges(void) | |
| { | |
| struct device_node *np; | |
| struct of_range range; | |
| struct of_range_parser parser; | |
| struct resource res; | |
| int ret, count, i = 0; | |
| np = of_find_node_by_path("/testcase-data/address-tests"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| if (of_range_parser_init(&parser, np)) { | |
| pr_err("missing ranges property\n"); | |
| return; | |
| } | |
| ret = of_range_to_resource(np, 1, &res); | |
| unittest(!ret, "of_range_to_resource returned error (%d) node %pOF\n", | |
| ret, np); | |
| unittest(resource_type(&res) == IORESOURCE_MEM, | |
| "of_range_to_resource wrong resource type on node %pOF res=%pR\n", | |
| np, &res); | |
| unittest(res.start == 0xd0000000, | |
| "of_range_to_resource wrong resource start address on node %pOF res=%pR\n", | |
| np, &res); | |
| unittest(resource_size(&res) == 0x20000000, | |
| "of_range_to_resource wrong resource start address on node %pOF res=%pR\n", | |
| np, &res); | |
| count = of_range_count(&parser); | |
| unittest(count == 2, | |
| "of_range_count wrong size on node %pOF count=%d\n", | |
| np, count); | |
| /* | |
| * Get the "ranges" from the device tree | |
| */ | |
| for_each_of_range(&parser, &range) { | |
| unittest(range.flags == IORESOURCE_MEM, | |
| "for_each_of_range wrong flags on node %pOF flags=%x (expected %x)\n", | |
| np, range.flags, IORESOURCE_MEM); | |
| if (!i) { | |
| unittest(range.size == 0x50000000, | |
| "for_each_of_range wrong size on node %pOF size=%llx\n", | |
| np, range.size); | |
| unittest(range.cpu_addr == 0x70000000, | |
| "for_each_of_range wrong CPU addr (%llx) on node %pOF", | |
| range.cpu_addr, np); | |
| unittest(range.bus_addr == 0x70000000, | |
| "for_each_of_range wrong bus addr (%llx) on node %pOF", | |
| range.pci_addr, np); | |
| } else { | |
| unittest(range.size == 0x20000000, | |
| "for_each_of_range wrong size on node %pOF size=%llx\n", | |
| np, range.size); | |
| unittest(range.cpu_addr == 0xd0000000, | |
| "for_each_of_range wrong CPU addr (%llx) on node %pOF", | |
| range.cpu_addr, np); | |
| unittest(range.bus_addr == 0x00000000, | |
| "for_each_of_range wrong bus addr (%llx) on node %pOF", | |
| range.pci_addr, np); | |
| } | |
| i++; | |
| } | |
| of_node_put(np); | |
| } | |
| static void __init of_unittest_bus_3cell_ranges(void) | |
| { | |
| struct device_node *np; | |
| struct of_range range; | |
| struct of_range_parser parser; | |
| int i = 0; | |
| np = of_find_node_by_path("/testcase-data/address-tests/bus@a0000000"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| if (of_range_parser_init(&parser, np)) { | |
| pr_err("missing ranges property\n"); | |
| return; | |
| } | |
| /* | |
| * Get the "ranges" from the device tree | |
| */ | |
| for_each_of_range(&parser, &range) { | |
| if (!i) { | |
| unittest(range.flags == 0xf00baa, | |
| "for_each_of_range wrong flags on node %pOF flags=%x\n", | |
| np, range.flags); | |
| unittest(range.size == 0x100000, | |
| "for_each_of_range wrong size on node %pOF size=%llx\n", | |
| np, range.size); | |
| unittest(range.cpu_addr == 0xa0000000, | |
| "for_each_of_range wrong CPU addr (%llx) on node %pOF", | |
| range.cpu_addr, np); | |
| unittest(range.bus_addr == 0x0, | |
| "for_each_of_range wrong bus addr (%llx) on node %pOF", | |
| range.pci_addr, np); | |
| } else { | |
| unittest(range.flags == 0xf00bee, | |
| "for_each_of_range wrong flags on node %pOF flags=%x\n", | |
| np, range.flags); | |
| unittest(range.size == 0x200000, | |
| "for_each_of_range wrong size on node %pOF size=%llx\n", | |
| np, range.size); | |
| unittest(range.cpu_addr == 0xb0000000, | |
| "for_each_of_range wrong CPU addr (%llx) on node %pOF", | |
| range.cpu_addr, np); | |
| unittest(range.bus_addr == 0x100000000, | |
| "for_each_of_range wrong bus addr (%llx) on node %pOF", | |
| range.pci_addr, np); | |
| } | |
| i++; | |
| } | |
| of_node_put(np); | |
| } | |
| static void __init of_unittest_reg(void) | |
| { | |
| struct device_node *np; | |
| struct resource res; | |
| int ret; | |
| u64 addr, size; | |
| np = of_find_node_by_path("/testcase-data/address-tests/bus@80000000/device@1000"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| ret = of_property_read_reg(np, 0, &addr, &size); | |
| unittest(!ret, "of_property_read_reg(%pOF) returned error %d\n", | |
| np, ret); | |
| unittest(addr == 0x1000, "of_property_read_reg(%pOF) untranslated address (%llx) incorrect\n", | |
| np, addr); | |
| of_node_put(np); | |
| np = of_find_node_by_path("/testcase-data/platform-tests-2/node/test-device@100"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| ret = of_address_to_resource(np, 0, &res); | |
| unittest(ret == -EINVAL, "of_address_to_resource(%pOF) expected error on untranslatable address\n", | |
| np); | |
| of_node_put(np); | |
| } | |
| struct of_unittest_expected_res { | |
| int index; | |
| struct resource res; | |
| }; | |
| static void __init of_unittest_check_addr(const char *node_path, | |
| const struct of_unittest_expected_res *tab_exp, | |
| unsigned int tab_exp_count) | |
| { | |
| const struct of_unittest_expected_res *expected; | |
| struct device_node *np; | |
| struct resource res; | |
| unsigned int count; | |
| int ret; | |
| if (!IS_ENABLED(CONFIG_OF_ADDRESS)) | |
| return; | |
| np = of_find_node_by_path(node_path); | |
| if (!np) { | |
| pr_err("missing testcase data (%s)\n", node_path); | |
| return; | |
| } | |
| expected = tab_exp; | |
| count = tab_exp_count; | |
| while (count--) { | |
| ret = of_address_to_resource(np, expected->index, &res); | |
| unittest(!ret, "of_address_to_resource(%pOF, %d) returned error %d\n", | |
| np, expected->index, ret); | |
| unittest(resource_type(&res) == resource_type(&expected->res) && | |
| res.start == expected->res.start && | |
| resource_size(&res) == resource_size(&expected->res), | |
| "of_address_to_resource(%pOF, %d) wrong resource %pR, expected %pR\n", | |
| np, expected->index, &res, &expected->res); | |
| expected++; | |
| } | |
| of_node_put(np); | |
| } | |
| static const struct of_unittest_expected_res of_unittest_reg_2cell_expected_res[] = { | |
| {.index = 0, .res = DEFINE_RES_MEM(0xa0a01000, 0x100) }, | |
| {.index = 1, .res = DEFINE_RES_MEM(0xa0a02000, 0x100) }, | |
| {.index = 2, .res = DEFINE_RES_MEM(0xc0c01000, 0x100) }, | |
| {.index = 3, .res = DEFINE_RES_MEM(0xd0d01000, 0x100) }, | |
| }; | |
| static const struct of_unittest_expected_res of_unittest_reg_3cell_expected_res[] = { | |
| {.index = 0, .res = DEFINE_RES_MEM(0xa0a01000, 0x100) }, | |
| {.index = 1, .res = DEFINE_RES_MEM(0xa0b02000, 0x100) }, | |
| {.index = 2, .res = DEFINE_RES_MEM(0xc0c01000, 0x100) }, | |
| {.index = 3, .res = DEFINE_RES_MEM(0xc0c09000, 0x100) }, | |
| {.index = 4, .res = DEFINE_RES_MEM(0xd0d01000, 0x100) }, | |
| }; | |
| static const struct of_unittest_expected_res of_unittest_reg_pci_expected_res[] = { | |
| {.index = 0, .res = DEFINE_RES_MEM(0xe8001000, 0x1000) }, | |
| {.index = 1, .res = DEFINE_RES_MEM(0xea002000, 0x2000) }, | |
| }; | |
| static void __init of_unittest_translate_addr(void) | |
| { | |
| of_unittest_check_addr("/testcase-data/address-tests2/bus-2cell@10000000/device@100000", | |
| of_unittest_reg_2cell_expected_res, | |
| ARRAY_SIZE(of_unittest_reg_2cell_expected_res)); | |
| of_unittest_check_addr("/testcase-data/address-tests2/bus-3cell@20000000/local-bus@100000/device@f1001000", | |
| of_unittest_reg_3cell_expected_res, | |
| ARRAY_SIZE(of_unittest_reg_3cell_expected_res)); | |
| of_unittest_check_addr("/testcase-data/address-tests2/pcie@d1070000/pci@0,0/dev@0,0/local-bus@0/dev@e0000000", | |
| of_unittest_reg_pci_expected_res, | |
| ARRAY_SIZE(of_unittest_reg_pci_expected_res)); | |
| } | |
| static void __init of_unittest_parse_interrupts(void) | |
| { | |
| struct device_node *np; | |
| struct of_phandle_args args; | |
| int i, rc; | |
| if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) | |
| return; | |
| np = of_find_node_by_path("/testcase-data/interrupts/interrupts0"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| for (i = 0; i < 4; i++) { | |
| bool passed = true; | |
| memset(&args, 0, sizeof(args)); | |
| rc = of_irq_parse_one(np, i, &args); | |
| passed &= !rc; | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == (i + 1)); | |
| unittest(passed, "index %i - data error on node %pOF rc=%i\n", | |
| i, args.np, rc); | |
| } | |
| of_node_put(np); | |
| np = of_find_node_by_path("/testcase-data/interrupts/interrupts1"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| for (i = 0; i < 4; i++) { | |
| bool passed = true; | |
| memset(&args, 0, sizeof(args)); | |
| rc = of_irq_parse_one(np, i, &args); | |
| /* Test the values from tests-phandle.dtsi */ | |
| switch (i) { | |
| case 0: | |
| passed &= !rc; | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == 9); | |
| break; | |
| case 1: | |
| passed &= !rc; | |
| passed &= (args.args_count == 3); | |
| passed &= (args.args[0] == 10); | |
| passed &= (args.args[1] == 11); | |
| passed &= (args.args[2] == 12); | |
| break; | |
| case 2: | |
| passed &= !rc; | |
| passed &= (args.args_count == 2); | |
| passed &= (args.args[0] == 13); | |
| passed &= (args.args[1] == 14); | |
| break; | |
| case 3: | |
| passed &= !rc; | |
| passed &= (args.args_count == 2); | |
| passed &= (args.args[0] == 15); | |
| passed &= (args.args[1] == 16); | |
| break; | |
| default: | |
| passed = false; | |
| } | |
| unittest(passed, "index %i - data error on node %pOF rc=%i\n", | |
| i, args.np, rc); | |
| } | |
| of_node_put(np); | |
| } | |
| static void __init of_unittest_parse_interrupts_extended(void) | |
| { | |
| struct device_node *np; | |
| struct of_phandle_args args; | |
| int i, rc; | |
| if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) | |
| return; | |
| np = of_find_node_by_path("/testcase-data/interrupts/interrupts-extended0"); | |
| if (!np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| for (i = 0; i < 7; i++) { | |
| bool passed = true; | |
| memset(&args, 0, sizeof(args)); | |
| rc = of_irq_parse_one(np, i, &args); | |
| /* Test the values from tests-phandle.dtsi */ | |
| switch (i) { | |
| case 0: | |
| passed &= !rc; | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == 1); | |
| break; | |
| case 1: | |
| passed &= !rc; | |
| passed &= (args.args_count == 3); | |
| passed &= (args.args[0] == 2); | |
| passed &= (args.args[1] == 3); | |
| passed &= (args.args[2] == 4); | |
| break; | |
| case 2: | |
| passed &= !rc; | |
| passed &= (args.args_count == 2); | |
| passed &= (args.args[0] == 5); | |
| passed &= (args.args[1] == 6); | |
| break; | |
| case 3: | |
| passed &= !rc; | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == 9); | |
| break; | |
| case 4: | |
| passed &= !rc; | |
| passed &= (args.args_count == 3); | |
| passed &= (args.args[0] == 10); | |
| passed &= (args.args[1] == 11); | |
| passed &= (args.args[2] == 12); | |
| break; | |
| case 5: | |
| passed &= !rc; | |
| passed &= (args.args_count == 2); | |
| passed &= (args.args[0] == 13); | |
| passed &= (args.args[1] == 14); | |
| break; | |
| case 6: | |
| /* | |
| * Tests child node that is missing property | |
| * #address-cells. See the comments in | |
| * drivers/of/unittest-data/tests-interrupts.dtsi | |
| * nodes intmap1 and interrupts-extended0 | |
| */ | |
| passed &= !rc; | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == 15); | |
| break; | |
| default: | |
| passed = false; | |
| } | |
| unittest(passed, "index %i - data error on node %pOF rc=%i\n", | |
| i, args.np, rc); | |
| } | |
| of_node_put(np); | |
| } | |
| struct of_unittest_expected_imap_item { | |
| u32 child_imap_count; | |
| u32 child_imap[2]; | |
| const char *parent_path; | |
| int parent_args_count; | |
| u32 parent_args[3]; | |
| }; | |
| static const struct of_unittest_expected_imap_item of_unittest_expected_imap_items[] = { | |
| { | |
| .child_imap_count = 2, | |
| .child_imap = {1, 11}, | |
| .parent_path = "/testcase-data/interrupts/intc0", | |
| .parent_args_count = 1, | |
| .parent_args = {100}, | |
| }, { | |
| .child_imap_count = 2, | |
| .child_imap = {2, 22}, | |
| .parent_path = "/testcase-data/interrupts/intc1", | |
| .parent_args_count = 3, | |
| .parent_args = {200, 201, 202}, | |
| }, { | |
| .child_imap_count = 2, | |
| .child_imap = {3, 33}, | |
| .parent_path = "/testcase-data/interrupts/intc2", | |
| .parent_args_count = 2, | |
| .parent_args = {300, 301}, | |
| }, { | |
| .child_imap_count = 2, | |
| .child_imap = {4, 44}, | |
| .parent_path = "/testcase-data/interrupts/intc2", | |
| .parent_args_count = 2, | |
| .parent_args = {400, 401}, | |
| } | |
| }; | |
| static void __init of_unittest_parse_interrupt_map(void) | |
| { | |
| const struct of_unittest_expected_imap_item *expected_item; | |
| struct device_node *imap_np, *expected_parent_np; | |
| struct of_imap_parser imap_parser; | |
| struct of_imap_item imap_item; | |
| int count, ret, i; | |
| if (of_irq_workarounds & (OF_IMAP_NO_PHANDLE | OF_IMAP_OLDWORLD_MAC)) | |
| return; | |
| imap_np = of_find_node_by_path("/testcase-data/interrupts/intmap2"); | |
| if (!imap_np) { | |
| pr_err("missing testcase data\n"); | |
| return; | |
| } | |
| ret = of_imap_parser_init(&imap_parser, imap_np, &imap_item); | |
| if (unittest(!ret, "of_imap_parser_init(%pOF) returned error %d\n", | |
| imap_np, ret)) | |
| goto end; | |
| expected_item = of_unittest_expected_imap_items; | |
| count = 0; | |
| for_each_of_imap_item(&imap_parser, &imap_item) { | |
| if (unittest(count < ARRAY_SIZE(of_unittest_expected_imap_items), | |
| "imap item number %d not expected. Max number %zu\n", | |
| count, ARRAY_SIZE(of_unittest_expected_imap_items) - 1)) { | |
| of_node_put(imap_item.parent_args.np); | |
| goto end; | |
| } | |
| expected_parent_np = of_find_node_by_path(expected_item->parent_path); | |
| if (unittest(expected_parent_np, | |
| "missing dependent testcase data (%s)\n", | |
| expected_item->parent_path)) { | |
| of_node_put(imap_item.parent_args.np); | |
| goto end; | |
| } | |
| unittest(imap_item.child_imap_count == expected_item->child_imap_count, | |
| "imap[%d] child_imap_count = %u, expected %u\n", | |
| count, imap_item.child_imap_count, | |
| expected_item->child_imap_count); | |
| for (i = 0; i < expected_item->child_imap_count; i++) | |
| unittest(imap_item.child_imap[i] == expected_item->child_imap[i], | |
| "imap[%d] child_imap[%d] = %u, expected %u\n", | |
| count, i, imap_item.child_imap[i], | |
| expected_item->child_imap[i]); | |
| unittest(imap_item.parent_args.np == expected_parent_np, | |
| "imap[%d] parent np = %pOF, expected %pOF\n", | |
| count, imap_item.parent_args.np, expected_parent_np); | |
| unittest(imap_item.parent_args.args_count == expected_item->parent_args_count, | |
| "imap[%d] parent param_count = %d, expected %d\n", | |
| count, imap_item.parent_args.args_count, | |
| expected_item->parent_args_count); | |
| for (i = 0; i < expected_item->parent_args_count; i++) | |
| unittest(imap_item.parent_args.args[i] == expected_item->parent_args[i], | |
| "imap[%d] parent param[%d] = %u, expected %u\n", | |
| count, i, imap_item.parent_args.args[i], | |
| expected_item->parent_args[i]); | |
| of_node_put(expected_parent_np); | |
| count++; | |
| expected_item++; | |
| } | |
| unittest(count == ARRAY_SIZE(of_unittest_expected_imap_items), | |
| "Missing items. %d parsed, expected %zu\n", | |
| count, ARRAY_SIZE(of_unittest_expected_imap_items)); | |
| end: | |
| of_node_put(imap_np); | |
| } | |
| #if IS_ENABLED(CONFIG_OF_DYNAMIC) | |
| static void __init of_unittest_irq_refcount(void) | |
| { | |
| struct of_phandle_args args; | |
| struct device_node *intc0, *int_ext0; | |
| struct device_node *int2, *intc_intmap0; | |
| unsigned int ref_c0, ref_c1, ref_c2; | |
| int rc; | |
| bool passed; | |
| if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) | |
| return; | |
| intc0 = of_find_node_by_path("/testcase-data/interrupts/intc0"); | |
| int_ext0 = of_find_node_by_path("/testcase-data/interrupts/interrupts-extended0"); | |
| intc_intmap0 = of_find_node_by_path("/testcase-data/interrupts/intc-intmap0"); | |
| int2 = of_find_node_by_path("/testcase-data/interrupts/interrupts2"); | |
| if (!intc0 || !int_ext0 || !intc_intmap0 || !int2) { | |
| pr_err("missing testcase data\n"); | |
| goto out; | |
| } | |
| /* Test refcount for API of_irq_parse_one() */ | |
| passed = true; | |
| ref_c0 = OF_KREF_READ(intc0); | |
| ref_c1 = ref_c0 + 1; | |
| memset(&args, 0, sizeof(args)); | |
| rc = of_irq_parse_one(int_ext0, 0, &args); | |
| ref_c2 = OF_KREF_READ(intc0); | |
| of_node_put(args.np); | |
| passed &= !rc; | |
| passed &= (args.np == intc0); | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == 1); | |
| passed &= (ref_c1 == ref_c2); | |
| unittest(passed, "IRQ refcount case #1 failed, original(%u) expected(%u) got(%u)\n", | |
| ref_c0, ref_c1, ref_c2); | |
| /* Test refcount for API of_irq_parse_raw() */ | |
| passed = true; | |
| ref_c0 = OF_KREF_READ(intc_intmap0); | |
| ref_c1 = ref_c0 + 1; | |
| memset(&args, 0, sizeof(args)); | |
| rc = of_irq_parse_one(int2, 0, &args); | |
| ref_c2 = OF_KREF_READ(intc_intmap0); | |
| of_node_put(args.np); | |
| passed &= !rc; | |
| passed &= (args.np == intc_intmap0); | |
| passed &= (args.args_count == 1); | |
| passed &= (args.args[0] == 2); | |
| passed &= (ref_c1 == ref_c2); | |
| unittest(passed, "IRQ refcount case #2 failed, original(%u) expected(%u) got(%u)\n", | |
| ref_c0, ref_c1, ref_c2); | |
| out: | |
| of_node_put(int2); | |
| of_node_put(intc_intmap0); | |
| of_node_put(int_ext0); | |
| of_node_put(intc0); | |
| } | |
| #else | |
| static inline void __init of_unittest_irq_refcount(void) { } | |
| #endif | |
| static const struct of_device_id match_node_table[] = { | |
| { .data = "A", .name = "name0", }, /* Name alone is lowest priority */ | |
| { .data = "B", .type = "type1", }, /* followed by type alone */ | |
| { .data = "Ca", .name = "name2", .type = "type1", }, /* followed by both together */ | |
| { .data = "Cb", .name = "name2", }, /* Only match when type doesn't match */ | |
| { .data = "Cc", .name = "name2", .type = "type2", }, | |
| { .data = "E", .compatible = "compat3" }, | |
| { .data = "G", .compatible = "compat2", }, | |
| { .data = "H", .compatible = "compat2", .name = "name5", }, | |
| { .data = "I", .compatible = "compat2", .type = "type1", }, | |
| { .data = "J", .compatible = "compat2", .type = "type1", .name = "name8", }, | |
| { .data = "K", .compatible = "compat2", .name = "name9", }, | |
| {} | |
| }; | |
| static struct { | |
| const char *path; | |
| const char *data; | |
| } match_node_tests[] = { | |
| { .path = "/testcase-data/match-node/name0", .data = "A", }, | |
| { .path = "/testcase-data/match-node/name1", .data = "B", }, | |
| { .path = "/testcase-data/match-node/a/name2", .data = "Ca", }, | |
| { .path = "/testcase-data/match-node/b/name2", .data = "Cb", }, | |
| { .path = "/testcase-data/match-node/c/name2", .data = "Cc", }, | |
| { .path = "/testcase-data/match-node/name3", .data = "E", }, | |
| { .path = "/testcase-data/match-node/name4", .data = "G", }, | |
| { .path = "/testcase-data/match-node/name5", .data = "H", }, | |
| { .path = "/testcase-data/match-node/name6", .data = "G", }, | |
| { .path = "/testcase-data/match-node/name7", .data = "I", }, | |
| { .path = "/testcase-data/match-node/name8", .data = "J", }, | |
| { .path = "/testcase-data/match-node/name9", .data = "K", }, | |
| }; | |
| static void __init of_unittest_match_node(void) | |
| { | |
| struct device_node *np; | |
| const struct of_device_id *match; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(match_node_tests); i++) { | |
| np = of_find_node_by_path(match_node_tests[i].path); | |
| if (!np) { | |
| unittest(0, "missing testcase node %s\n", | |
| match_node_tests[i].path); | |
| continue; | |
| } | |
| match = of_match_node(match_node_table, np); | |
| if (!match) { | |
| unittest(0, "%s didn't match anything\n", | |
| match_node_tests[i].path); | |
| continue; | |
| } | |
| if (strcmp(match->data, match_node_tests[i].data) != 0) { | |
| unittest(0, "%s got wrong match. expected %s, got %s\n", | |
| match_node_tests[i].path, match_node_tests[i].data, | |
| (const char *)match->data); | |
| continue; | |
| } | |
| unittest(1, "passed"); | |
| } | |
| } | |
| static struct resource test_bus_res = DEFINE_RES_MEM(0xfffffff8, 2); | |
| static const struct platform_device_info test_bus_info = { | |
| .name = "unittest-bus", | |
| }; | |
| static void __init of_unittest_platform_populate(void) | |
| { | |
| int irq, rc; | |
| struct device_node *np, *child, *grandchild; | |
| struct platform_device *pdev, *test_bus; | |
| const struct of_device_id match[] = { | |
| { .compatible = "test-device", }, | |
| {} | |
| }; | |
| np = of_find_node_by_path("/testcase-data"); | |
| of_platform_default_populate(np, NULL, NULL); | |
| /* Test that a missing irq domain returns -EPROBE_DEFER */ | |
| np = of_find_node_by_path("/testcase-data/testcase-device1"); | |
| pdev = of_find_device_by_node(np); | |
| unittest(pdev, "device 1 creation failed\n"); | |
| if (!(of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)) { | |
| irq = platform_get_irq(pdev, 0); | |
| unittest(irq == -EPROBE_DEFER, | |
| "device deferred probe failed - %d\n", irq); | |
| /* Test that a parsing failure does not return -EPROBE_DEFER */ | |
| np = of_find_node_by_path("/testcase-data/testcase-device2"); | |
| pdev = of_find_device_by_node(np); | |
| unittest(pdev, "device 2 creation failed\n"); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found"); | |
| irq = platform_get_irq(pdev, 0); | |
| EXPECT_END(KERN_INFO, | |
| "platform testcase-data:testcase-device2: error -ENXIO: IRQ index 0 not found"); | |
| unittest(irq < 0 && irq != -EPROBE_DEFER, | |
| "device parsing error failed - %d\n", irq); | |
| } | |
| np = of_find_node_by_path("/testcase-data/platform-tests"); | |
| unittest(np, "No testcase data in device tree\n"); | |
| if (!np) | |
| return; | |
| test_bus = platform_device_register_full(&test_bus_info); | |
| rc = PTR_ERR_OR_ZERO(test_bus); | |
| unittest(!rc, "testbus registration failed; rc=%i\n", rc); | |
| if (rc) { | |
| of_node_put(np); | |
| return; | |
| } | |
| test_bus->dev.of_node = np; | |
| /* | |
| * Add a dummy resource to the test bus node after it is | |
| * registered to catch problems with un-inserted resources. The | |
| * DT code doesn't insert the resources, and it has caused the | |
| * kernel to oops in the past. This makes sure the same bug | |
| * doesn't crop up again. | |
| */ | |
| platform_device_add_resources(test_bus, &test_bus_res, 1); | |
| of_platform_populate(np, match, NULL, &test_bus->dev); | |
| for_each_child_of_node(np, child) { | |
| for_each_child_of_node(child, grandchild) { | |
| if (!of_property_present(grandchild, "compatible")) | |
| continue; | |
| pdev = of_find_device_by_node(grandchild); | |
| unittest(pdev, | |
| "Could not create device for node '%pOFn'\n", | |
| grandchild); | |
| platform_device_put(pdev); | |
| } | |
| } | |
| of_platform_depopulate(&test_bus->dev); | |
| for_each_child_of_node(np, child) { | |
| for_each_child_of_node(child, grandchild) | |
| unittest(!of_find_device_by_node(grandchild), | |
| "device didn't get destroyed '%pOFn'\n", | |
| grandchild); | |
| } | |
| platform_device_unregister(test_bus); | |
| of_node_put(np); | |
| } | |
| /** | |
| * update_node_properties - adds the properties | |
| * of np into dup node (present in live tree) and | |
| * updates parent of children of np to dup. | |
| * | |
| * @np: node whose properties are being added to the live tree | |
| * @dup: node present in live tree to be updated | |
| */ | |
| static void update_node_properties(struct device_node *np, | |
| struct device_node *dup) | |
| { | |
| struct property *prop; | |
| struct property *save_next; | |
| struct device_node *child; | |
| int ret; | |
| for_each_child_of_node(np, child) | |
| child->parent = dup; | |
| /* | |
| * "unittest internal error: unable to add testdata property" | |
| * | |
| * If this message reports a property in node '/__symbols__' then | |
| * the respective unittest overlay contains a label that has the | |
| * same name as a label in the live devicetree. The label will | |
| * be in the live devicetree only if the devicetree source was | |
| * compiled with the '-@' option. If you encounter this error, | |
| * please consider renaming __all__ of the labels in the unittest | |
| * overlay dts files with an odd prefix that is unlikely to be | |
| * used in a real devicetree. | |
| */ | |
| /* | |
| * open code for_each_property_of_node() because of_add_property() | |
| * sets prop->next to NULL | |
| */ | |
| for (prop = np->properties; prop != NULL; prop = save_next) { | |
| save_next = prop->next; | |
| ret = of_add_property(dup, prop); | |
| if (ret) { | |
| if (ret == -EEXIST && !strcmp(prop->name, "name")) | |
| continue; | |
| pr_err("unittest internal error: unable to add testdata property %pOF/%s", | |
| np, prop->name); | |
| } | |
| } | |
| } | |
| /** | |
| * attach_node_and_children - attaches nodes | |
| * and its children to live tree. | |
| * CAUTION: misleading function name - if node @np already exists in | |
| * the live tree then children of @np are *not* attached to the live | |
| * tree. This works for the current test devicetree nodes because such | |
| * nodes do not have child nodes. | |
| * | |
| * @np: Node to attach to live tree | |
| */ | |
| static void attach_node_and_children(struct device_node *np) | |
| { | |
| struct device_node *next, *dup, *child; | |
| unsigned long flags; | |
| const char *full_name; | |
| full_name = kasprintf(GFP_KERNEL, "%pOF", np); | |
| if (!full_name) | |
| return; | |
| if (!strcmp(full_name, "/__local_fixups__") || | |
| !strcmp(full_name, "/__fixups__")) { | |
| kfree(full_name); | |
| return; | |
| } | |
| dup = of_find_node_by_path(full_name); | |
| kfree(full_name); | |
| if (dup) { | |
| update_node_properties(np, dup); | |
| return; | |
| } | |
| child = np->child; | |
| np->child = NULL; | |
| mutex_lock(&of_mutex); | |
| raw_spin_lock_irqsave(&devtree_lock, flags); | |
| np->sibling = np->parent->child; | |
| np->parent->child = np; | |
| of_node_clear_flag(np, OF_DETACHED); | |
| raw_spin_unlock_irqrestore(&devtree_lock, flags); | |
| __of_attach_node_sysfs(np); | |
| mutex_unlock(&of_mutex); | |
| while (child) { | |
| next = child->sibling; | |
| attach_node_and_children(child); | |
| child = next; | |
| } | |
| } | |
| /** | |
| * unittest_data_add - Reads, copies data from | |
| * linked tree and attaches it to the live tree | |
| */ | |
| static int __init unittest_data_add(void) | |
| { | |
| void *unittest_data_align; | |
| struct device_node *unittest_data_node = NULL, *np; | |
| /* | |
| * __dtbo_testcases_begin[] and __dtbo_testcases_end[] are magically | |
| * created by cmd_wrap_S_dtbo in scripts/Makefile.dtbs | |
| */ | |
| extern uint8_t __dtbo_testcases_begin[]; | |
| extern uint8_t __dtbo_testcases_end[]; | |
| const int size = __dtbo_testcases_end - __dtbo_testcases_begin; | |
| int rc; | |
| void *ret; | |
| if (!size) { | |
| pr_warn("%s: testcases is empty\n", __func__); | |
| return -ENODATA; | |
| } | |
| /* creating copy */ | |
| void *unittest_data __free(kfree) = kmalloc(size + FDT_ALIGN_SIZE, GFP_KERNEL); | |
| if (!unittest_data) | |
| return -ENOMEM; | |
| unittest_data_align = PTR_ALIGN(unittest_data, FDT_ALIGN_SIZE); | |
| memcpy(unittest_data_align, __dtbo_testcases_begin, size); | |
| ret = of_fdt_unflatten_tree(unittest_data_align, NULL, &unittest_data_node); | |
| if (!ret) { | |
| pr_warn("%s: unflatten testcases tree failed\n", __func__); | |
| return -ENODATA; | |
| } | |
| if (!unittest_data_node) { | |
| pr_warn("%s: testcases tree is empty\n", __func__); | |
| return -ENODATA; | |
| } | |
| /* | |
| * This lock normally encloses of_resolve_phandles() | |
| */ | |
| of_overlay_mutex_lock(); | |
| rc = of_resolve_phandles(unittest_data_node); | |
| if (rc) { | |
| pr_err("%s: Failed to resolve phandles (rc=%i)\n", __func__, rc); | |
| rc = -EINVAL; | |
| goto unlock; | |
| } | |
| /* attach the sub-tree to live tree */ | |
| if (!of_root) { | |
| pr_warn("%s: no live tree to attach sub-tree\n", __func__); | |
| rc = -ENODEV; | |
| goto unlock; | |
| } | |
| EXPECT_BEGIN(KERN_INFO, | |
| "Duplicate name in testcase-data, renamed to \"duplicate-name#1\""); | |
| np = unittest_data_node->child; | |
| while (np) { | |
| struct device_node *next = np->sibling; | |
| np->parent = of_root; | |
| /* this will clear OF_DETACHED in np and children */ | |
| attach_node_and_children(np); | |
| np = next; | |
| } | |
| EXPECT_END(KERN_INFO, | |
| "Duplicate name in testcase-data, renamed to \"duplicate-name#1\""); | |
| retain_and_null_ptr(unittest_data); | |
| unlock: | |
| of_overlay_mutex_unlock(); | |
| return rc; | |
| } | |
| #ifdef CONFIG_OF_OVERLAY | |
| static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id); | |
| static int unittest_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| if (np == NULL) { | |
| dev_err(dev, "No OF data for device\n"); | |
| return -EINVAL; | |
| } | |
| dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | |
| of_platform_populate(np, NULL, NULL, &pdev->dev); | |
| return 0; | |
| } | |
| static void unittest_remove(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | |
| } | |
| static const struct of_device_id unittest_match[] = { | |
| { .compatible = "unittest", }, | |
| {}, | |
| }; | |
| static struct platform_driver unittest_driver = { | |
| .probe = unittest_probe, | |
| .remove = unittest_remove, | |
| .driver = { | |
| .name = "unittest", | |
| .of_match_table = unittest_match, | |
| }, | |
| }; | |
| /* get the platform device instantiated at the path */ | |
| static struct platform_device *of_path_to_platform_device(const char *path) | |
| { | |
| struct device_node *np; | |
| struct platform_device *pdev; | |
| np = of_find_node_by_path(path); | |
| if (np == NULL) | |
| return NULL; | |
| pdev = of_find_device_by_node(np); | |
| of_node_put(np); | |
| return pdev; | |
| } | |
| /* find out if a platform device exists at that path */ | |
| static int of_path_platform_device_exists(const char *path) | |
| { | |
| struct platform_device *pdev; | |
| pdev = of_path_to_platform_device(path); | |
| platform_device_put(pdev); | |
| return pdev != NULL; | |
| } | |
| #ifdef CONFIG_OF_GPIO | |
| struct unittest_gpio_dev { | |
| struct gpio_chip chip; | |
| }; | |
| static int unittest_gpio_chip_request_count; | |
| static int unittest_gpio_probe_count; | |
| static int unittest_gpio_probe_pass_count; | |
| static int unittest_gpio_chip_request(struct gpio_chip *chip, unsigned int offset) | |
| { | |
| unittest_gpio_chip_request_count++; | |
| pr_debug("%s(): %s %d %d\n", __func__, chip->label, offset, | |
| unittest_gpio_chip_request_count); | |
| return 0; | |
| } | |
| static int unittest_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct unittest_gpio_dev *devptr; | |
| int ret; | |
| unittest_gpio_probe_count++; | |
| devptr = kzalloc_obj(*devptr); | |
| if (!devptr) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, devptr); | |
| devptr->chip.fwnode = dev_fwnode(&pdev->dev); | |
| devptr->chip.label = "of-unittest-gpio"; | |
| devptr->chip.base = -1; /* dynamic allocation */ | |
| devptr->chip.ngpio = 5; | |
| devptr->chip.request = unittest_gpio_chip_request; | |
| ret = gpiochip_add_data(&devptr->chip, NULL); | |
| unittest(!ret, | |
| "gpiochip_add_data() for node @%pfw failed, ret = %d\n", devptr->chip.fwnode, ret); | |
| if (!ret) | |
| unittest_gpio_probe_pass_count++; | |
| return ret; | |
| } | |
| static void unittest_gpio_remove(struct platform_device *pdev) | |
| { | |
| struct unittest_gpio_dev *devptr = platform_get_drvdata(pdev); | |
| struct device *dev = &pdev->dev; | |
| dev_dbg(dev, "%s for node @%pfw\n", __func__, devptr->chip.fwnode); | |
| if (devptr->chip.base != -1) | |
| gpiochip_remove(&devptr->chip); | |
| kfree(devptr); | |
| } | |
| static const struct of_device_id unittest_gpio_id[] = { | |
| { .compatible = "unittest-gpio", }, | |
| {} | |
| }; | |
| static struct platform_driver unittest_gpio_driver = { | |
| .probe = unittest_gpio_probe, | |
| .remove = unittest_gpio_remove, | |
| .driver = { | |
| .name = "unittest-gpio", | |
| .of_match_table = unittest_gpio_id, | |
| }, | |
| }; | |
| static void __init of_unittest_overlay_gpio(void) | |
| { | |
| int chip_request_count; | |
| int probe_pass_count; | |
| int ret; | |
| /* | |
| * tests: apply overlays before registering driver | |
| * Similar to installing a driver as a module, the | |
| * driver is registered after applying the overlays. | |
| * | |
| * The overlays are applied by overlay_data_apply() | |
| * instead of of_unittest_apply_overlay() so that they | |
| * will not be tracked. Thus they will not be removed | |
| * by of_unittest_remove_tracked_overlays(). | |
| * | |
| * - apply overlay_gpio_01 | |
| * - apply overlay_gpio_02a | |
| * - apply overlay_gpio_02b | |
| * - register driver | |
| * | |
| * register driver will result in | |
| * - probe and processing gpio hog for overlay_gpio_01 | |
| * - probe for overlay_gpio_02a | |
| * - processing gpio for overlay_gpio_02b | |
| */ | |
| probe_pass_count = unittest_gpio_probe_pass_count; | |
| chip_request_count = unittest_gpio_chip_request_count; | |
| /* | |
| * overlay_gpio_01 contains gpio node and child gpio hog node | |
| * overlay_gpio_02a contains gpio node | |
| * overlay_gpio_02b contains child gpio hog node | |
| */ | |
| unittest(overlay_data_apply("overlay_gpio_01", NULL), | |
| "Adding overlay 'overlay_gpio_01' failed\n"); | |
| unittest(overlay_data_apply("overlay_gpio_02a", NULL), | |
| "Adding overlay 'overlay_gpio_02a' failed\n"); | |
| unittest(overlay_data_apply("overlay_gpio_02b", NULL), | |
| "Adding overlay 'overlay_gpio_02b' failed\n"); | |
| ret = platform_driver_register(&unittest_gpio_driver); | |
| if (unittest(ret == 0, "could not register unittest gpio driver\n")) | |
| return; | |
| unittest(probe_pass_count + 2 == unittest_gpio_probe_pass_count, | |
| "unittest_gpio_probe() failed or not called\n"); | |
| unittest(chip_request_count + 2 == unittest_gpio_chip_request_count, | |
| "unittest_gpio_chip_request() called %d times (expected 1 time)\n", | |
| unittest_gpio_chip_request_count - chip_request_count); | |
| /* | |
| * tests: apply overlays after registering driver | |
| * | |
| * Similar to a driver built-in to the kernel, the | |
| * driver is registered before applying the overlays. | |
| * | |
| * overlay_gpio_03 contains gpio node and child gpio hog node | |
| * | |
| * - apply overlay_gpio_03 | |
| * | |
| * apply overlay will result in | |
| * - probe and processing gpio hog. | |
| */ | |
| probe_pass_count = unittest_gpio_probe_pass_count; | |
| chip_request_count = unittest_gpio_chip_request_count; | |
| /* overlay_gpio_03 contains gpio node and child gpio hog node */ | |
| unittest(overlay_data_apply("overlay_gpio_03", NULL), | |
| "Adding overlay 'overlay_gpio_03' failed\n"); | |
| unittest(probe_pass_count + 1 == unittest_gpio_probe_pass_count, | |
| "unittest_gpio_probe() failed or not called\n"); | |
| unittest(chip_request_count + 1 == unittest_gpio_chip_request_count, | |
| "unittest_gpio_chip_request() called %d times (expected 1 time)\n", | |
| unittest_gpio_chip_request_count - chip_request_count); | |
| /* | |
| * overlay_gpio_04a contains gpio node | |
| * | |
| * - apply overlay_gpio_04a | |
| * | |
| * apply the overlay will result in | |
| * - probe for overlay_gpio_04a | |
| */ | |
| probe_pass_count = unittest_gpio_probe_pass_count; | |
| chip_request_count = unittest_gpio_chip_request_count; | |
| /* overlay_gpio_04a contains gpio node */ | |
| unittest(overlay_data_apply("overlay_gpio_04a", NULL), | |
| "Adding overlay 'overlay_gpio_04a' failed\n"); | |
| unittest(probe_pass_count + 1 == unittest_gpio_probe_pass_count, | |
| "unittest_gpio_probe() failed or not called\n"); | |
| /* | |
| * overlay_gpio_04b contains child gpio hog node | |
| * | |
| * - apply overlay_gpio_04b | |
| * | |
| * apply the overlay will result in | |
| * - processing gpio for overlay_gpio_04b | |
| */ | |
| /* overlay_gpio_04b contains child gpio hog node */ | |
| unittest(overlay_data_apply("overlay_gpio_04b", NULL), | |
| "Adding overlay 'overlay_gpio_04b' failed\n"); | |
| unittest(chip_request_count + 1 == unittest_gpio_chip_request_count, | |
| "unittest_gpio_chip_request() called %d times (expected 1 time)\n", | |
| unittest_gpio_chip_request_count - chip_request_count); | |
| } | |
| #else | |
| static void __init of_unittest_overlay_gpio(void) | |
| { | |
| /* skip tests */ | |
| } | |
| #endif | |
| #if IS_BUILTIN(CONFIG_I2C) | |
| /* get the i2c client device instantiated at the path */ | |
| static struct i2c_client *of_path_to_i2c_client(const char *path) | |
| { | |
| struct device_node *np; | |
| struct i2c_client *client; | |
| np = of_find_node_by_path(path); | |
| if (np == NULL) | |
| return NULL; | |
| client = of_find_i2c_device_by_node(np); | |
| of_node_put(np); | |
| return client; | |
| } | |
| /* find out if a i2c client device exists at that path */ | |
| static int of_path_i2c_client_exists(const char *path) | |
| { | |
| struct i2c_client *client; | |
| client = of_path_to_i2c_client(path); | |
| if (client) | |
| put_device(&client->dev); | |
| return client != NULL; | |
| } | |
| #else | |
| static int of_path_i2c_client_exists(const char *path) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| enum overlay_type { | |
| PDEV_OVERLAY, | |
| I2C_OVERLAY | |
| }; | |
| static int of_path_device_type_exists(const char *path, | |
| enum overlay_type ovtype) | |
| { | |
| switch (ovtype) { | |
| case PDEV_OVERLAY: | |
| return of_path_platform_device_exists(path); | |
| case I2C_OVERLAY: | |
| return of_path_i2c_client_exists(path); | |
| } | |
| return 0; | |
| } | |
| static const char *unittest_path(int nr, enum overlay_type ovtype) | |
| { | |
| const char *base; | |
| static char buf[256]; | |
| switch (ovtype) { | |
| case PDEV_OVERLAY: | |
| base = "/testcase-data/overlay-node/test-bus"; | |
| break; | |
| case I2C_OVERLAY: | |
| base = "/testcase-data/overlay-node/test-bus/i2c-test-bus"; | |
| break; | |
| default: | |
| buf[0] = '\0'; | |
| return buf; | |
| } | |
| snprintf(buf, sizeof(buf) - 1, "%s/test-unittest%d", base, nr); | |
| buf[sizeof(buf) - 1] = '\0'; | |
| return buf; | |
| } | |
| static int of_unittest_device_exists(int unittest_nr, enum overlay_type ovtype) | |
| { | |
| const char *path; | |
| path = unittest_path(unittest_nr, ovtype); | |
| switch (ovtype) { | |
| case PDEV_OVERLAY: | |
| return of_path_platform_device_exists(path); | |
| case I2C_OVERLAY: | |
| return of_path_i2c_client_exists(path); | |
| } | |
| return 0; | |
| } | |
| static const char *overlay_name_from_nr(int nr) | |
| { | |
| static char buf[256]; | |
| snprintf(buf, sizeof(buf) - 1, | |
| "overlay_%d", nr); | |
| buf[sizeof(buf) - 1] = '\0'; | |
| return buf; | |
| } | |
| static const char *bus_path = "/testcase-data/overlay-node/test-bus"; | |
| #define MAX_TRACK_OVCS_IDS 256 | |
| static int track_ovcs_id[MAX_TRACK_OVCS_IDS]; | |
| static int track_ovcs_id_overlay_nr[MAX_TRACK_OVCS_IDS]; | |
| static int track_ovcs_id_cnt; | |
| static void of_unittest_track_overlay(int ovcs_id, int overlay_nr) | |
| { | |
| if (WARN_ON(track_ovcs_id_cnt >= MAX_TRACK_OVCS_IDS)) | |
| return; | |
| track_ovcs_id[track_ovcs_id_cnt] = ovcs_id; | |
| track_ovcs_id_overlay_nr[track_ovcs_id_cnt] = overlay_nr; | |
| track_ovcs_id_cnt++; | |
| } | |
| static void of_unittest_untrack_overlay(int ovcs_id) | |
| { | |
| if (WARN_ON(track_ovcs_id_cnt < 1)) | |
| return; | |
| track_ovcs_id_cnt--; | |
| /* If out of synch then test is broken. Do not try to recover. */ | |
| WARN_ON(track_ovcs_id[track_ovcs_id_cnt] != ovcs_id); | |
| } | |
| static void of_unittest_remove_tracked_overlays(void) | |
| { | |
| int ret, ovcs_id, overlay_nr, save_ovcs_id; | |
| const char *overlay_name; | |
| while (track_ovcs_id_cnt > 0) { | |
| ovcs_id = track_ovcs_id[track_ovcs_id_cnt - 1]; | |
| overlay_nr = track_ovcs_id_overlay_nr[track_ovcs_id_cnt - 1]; | |
| save_ovcs_id = ovcs_id; | |
| ret = of_overlay_remove(&ovcs_id); | |
| if (ret == -ENODEV) { | |
| overlay_name = overlay_name_from_nr(overlay_nr); | |
| pr_warn("%s: of_overlay_remove() for overlay \"%s\" failed, ret = %d\n", | |
| __func__, overlay_name, ret); | |
| } | |
| of_unittest_untrack_overlay(save_ovcs_id); | |
| } | |
| } | |
| static int __init of_unittest_apply_overlay(int overlay_nr, int *ovcs_id) | |
| { | |
| /* | |
| * The overlay will be tracked, thus it will be removed | |
| * by of_unittest_remove_tracked_overlays(). | |
| */ | |
| const char *overlay_name; | |
| overlay_name = overlay_name_from_nr(overlay_nr); | |
| if (!overlay_data_apply(overlay_name, ovcs_id)) { | |
| unittest(0, "could not apply overlay \"%s\"\n", overlay_name); | |
| return -EFAULT; | |
| } | |
| of_unittest_track_overlay(*ovcs_id, overlay_nr); | |
| return 0; | |
| } | |
| static int __init __of_unittest_apply_overlay_check(int overlay_nr, | |
| int unittest_nr, int before, int after, | |
| enum overlay_type ovtype) | |
| { | |
| int ret, ovcs_id; | |
| /* unittest device must be in before state */ | |
| if (of_unittest_device_exists(unittest_nr, ovtype) != before) { | |
| unittest(0, "%s with device @\"%s\" %s\n", | |
| overlay_name_from_nr(overlay_nr), | |
| unittest_path(unittest_nr, ovtype), | |
| !before ? "enabled" : "disabled"); | |
| return -EINVAL; | |
| } | |
| /* apply the overlay */ | |
| ovcs_id = 0; | |
| ret = of_unittest_apply_overlay(overlay_nr, &ovcs_id); | |
| if (ret != 0) { | |
| /* of_unittest_apply_overlay already called unittest() */ | |
| return ret; | |
| } | |
| /* unittest device must be in after state */ | |
| if (of_unittest_device_exists(unittest_nr, ovtype) != after) { | |
| unittest(0, "%s with device @\"%s\" %s\n", | |
| overlay_name_from_nr(overlay_nr), | |
| unittest_path(unittest_nr, ovtype), | |
| !after ? "enabled" : "disabled"); | |
| return -EINVAL; | |
| } | |
| return ovcs_id; | |
| } | |
| /* apply an overlay while checking before and after states */ | |
| static int __init of_unittest_apply_overlay_check(int overlay_nr, | |
| int unittest_nr, int before, int after, | |
| enum overlay_type ovtype) | |
| { | |
| int ovcs_id = __of_unittest_apply_overlay_check(overlay_nr, | |
| unittest_nr, before, after, ovtype); | |
| if (ovcs_id < 0) | |
| return ovcs_id; | |
| return 0; | |
| } | |
| /* apply an overlay and then revert it while checking before, after states */ | |
| static int __init of_unittest_apply_revert_overlay_check(int overlay_nr, | |
| int unittest_nr, int before, int after, | |
| enum overlay_type ovtype) | |
| { | |
| int ret, ovcs_id, save_ovcs_id; | |
| ovcs_id = __of_unittest_apply_overlay_check(overlay_nr, unittest_nr, | |
| before, after, ovtype); | |
| if (ovcs_id < 0) | |
| return ovcs_id; | |
| /* remove the overlay */ | |
| save_ovcs_id = ovcs_id; | |
| ret = of_overlay_remove(&ovcs_id); | |
| if (ret != 0) { | |
| unittest(0, "%s failed to be destroyed @\"%s\"\n", | |
| overlay_name_from_nr(overlay_nr), | |
| unittest_path(unittest_nr, ovtype)); | |
| return ret; | |
| } | |
| of_unittest_untrack_overlay(save_ovcs_id); | |
| /* unittest device must be again in before state */ | |
| if (of_unittest_device_exists(unittest_nr, ovtype) != before) { | |
| unittest(0, "%s with device @\"%s\" %s\n", | |
| overlay_name_from_nr(overlay_nr), | |
| unittest_path(unittest_nr, ovtype), | |
| !before ? "enabled" : "disabled"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* test activation of device */ | |
| static void __init of_unittest_overlay_0(void) | |
| { | |
| int ret; | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest0/status"); | |
| /* device should enable */ | |
| ret = of_unittest_apply_overlay_check(0, 0, 0, 1, PDEV_OVERLAY); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest0/status"); | |
| if (ret) | |
| return; | |
| unittest(1, "overlay test %d passed\n", 0); | |
| } | |
| /* test deactivation of device */ | |
| static void __init of_unittest_overlay_1(void) | |
| { | |
| int ret; | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest1/status"); | |
| /* device should disable */ | |
| ret = of_unittest_apply_overlay_check(1, 1, 1, 0, PDEV_OVERLAY); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest1/status"); | |
| if (ret) | |
| return; | |
| unittest(1, "overlay test %d passed\n", 1); | |
| } | |
| /* test activation of device */ | |
| static void __init of_unittest_overlay_2(void) | |
| { | |
| int ret; | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest2/status"); | |
| /* device should enable */ | |
| ret = of_unittest_apply_overlay_check(2, 2, 0, 1, PDEV_OVERLAY); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest2/status"); | |
| if (ret) | |
| return; | |
| unittest(1, "overlay test %d passed\n", 2); | |
| } | |
| /* test deactivation of device */ | |
| static void __init of_unittest_overlay_3(void) | |
| { | |
| int ret; | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest3/status"); | |
| /* device should disable */ | |
| ret = of_unittest_apply_overlay_check(3, 3, 1, 0, PDEV_OVERLAY); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest3/status"); | |
| if (ret) | |
| return; | |
| unittest(1, "overlay test %d passed\n", 3); | |
| } | |
| /* test activation of a full device node */ | |
| static void __init of_unittest_overlay_4(void) | |
| { | |
| /* device should disable */ | |
| if (of_unittest_apply_overlay_check(4, 4, 0, 1, PDEV_OVERLAY)) | |
| return; | |
| unittest(1, "overlay test %d passed\n", 4); | |
| } | |
| /* test overlay apply/revert sequence */ | |
| static void __init of_unittest_overlay_5(void) | |
| { | |
| int ret; | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest5/status"); | |
| /* device should disable */ | |
| ret = of_unittest_apply_revert_overlay_check(5, 5, 0, 1, PDEV_OVERLAY); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest5/status"); | |
| if (ret) | |
| return; | |
| unittest(1, "overlay test %d passed\n", 5); | |
| } | |
| /* test overlay application in sequence */ | |
| static void __init of_unittest_overlay_6(void) | |
| { | |
| int i, save_ovcs_id[2], ovcs_id; | |
| int overlay_nr = 6, unittest_nr = 6; | |
| int before = 0, after = 1; | |
| const char *overlay_name; | |
| int ret; | |
| /* unittest device must be in before state */ | |
| for (i = 0; i < 2; i++) { | |
| if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY) | |
| != before) { | |
| unittest(0, "%s with device @\"%s\" %s\n", | |
| overlay_name_from_nr(overlay_nr + i), | |
| unittest_path(unittest_nr + i, | |
| PDEV_OVERLAY), | |
| !before ? "enabled" : "disabled"); | |
| return; | |
| } | |
| } | |
| /* apply the overlays */ | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status"); | |
| overlay_name = overlay_name_from_nr(overlay_nr + 0); | |
| ret = overlay_data_apply(overlay_name, &ovcs_id); | |
| if (!ret) { | |
| unittest(0, "could not apply overlay \"%s\"\n", overlay_name); | |
| return; | |
| } | |
| save_ovcs_id[0] = ovcs_id; | |
| of_unittest_track_overlay(ovcs_id, overlay_nr + 0); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status"); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status"); | |
| overlay_name = overlay_name_from_nr(overlay_nr + 1); | |
| ret = overlay_data_apply(overlay_name, &ovcs_id); | |
| if (!ret) { | |
| unittest(0, "could not apply overlay \"%s\"\n", overlay_name); | |
| return; | |
| } | |
| save_ovcs_id[1] = ovcs_id; | |
| of_unittest_track_overlay(ovcs_id, overlay_nr + 1); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status"); | |
| for (i = 0; i < 2; i++) { | |
| /* unittest device must be in after state */ | |
| if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY) | |
| != after) { | |
| unittest(0, "overlay @\"%s\" failed @\"%s\" %s\n", | |
| overlay_name_from_nr(overlay_nr + i), | |
| unittest_path(unittest_nr + i, | |
| PDEV_OVERLAY), | |
| !after ? "enabled" : "disabled"); | |
| return; | |
| } | |
| } | |
| for (i = 1; i >= 0; i--) { | |
| ovcs_id = save_ovcs_id[i]; | |
| if (of_overlay_remove(&ovcs_id)) { | |
| unittest(0, "%s failed destroy @\"%s\"\n", | |
| overlay_name_from_nr(overlay_nr + i), | |
| unittest_path(unittest_nr + i, | |
| PDEV_OVERLAY)); | |
| return; | |
| } | |
| of_unittest_untrack_overlay(save_ovcs_id[i]); | |
| } | |
| for (i = 0; i < 2; i++) { | |
| /* unittest device must be again in before state */ | |
| if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY) | |
| != before) { | |
| unittest(0, "%s with device @\"%s\" %s\n", | |
| overlay_name_from_nr(overlay_nr + i), | |
| unittest_path(unittest_nr + i, | |
| PDEV_OVERLAY), | |
| !before ? "enabled" : "disabled"); | |
| return; | |
| } | |
| } | |
| unittest(1, "overlay test %d passed\n", 6); | |
| } | |
| /* test overlay application in sequence */ | |
| static void __init of_unittest_overlay_8(void) | |
| { | |
| int i, save_ovcs_id[2], ovcs_id; | |
| int overlay_nr = 8, unittest_nr = 8; | |
| const char *overlay_name; | |
| int ret; | |
| /* we don't care about device state in this test */ | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/status"); | |
| overlay_name = overlay_name_from_nr(overlay_nr + 0); | |
| ret = overlay_data_apply(overlay_name, &ovcs_id); | |
| if (!ret) | |
| unittest(0, "could not apply overlay \"%s\"\n", overlay_name); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/status"); | |
| if (!ret) | |
| return; | |
| save_ovcs_id[0] = ovcs_id; | |
| of_unittest_track_overlay(ovcs_id, overlay_nr + 0); | |
| overlay_name = overlay_name_from_nr(overlay_nr + 1); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/property-foo"); | |
| /* apply the overlays */ | |
| ret = overlay_data_apply(overlay_name, &ovcs_id); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/property-foo"); | |
| if (!ret) { | |
| unittest(0, "could not apply overlay \"%s\"\n", overlay_name); | |
| return; | |
| } | |
| save_ovcs_id[1] = ovcs_id; | |
| of_unittest_track_overlay(ovcs_id, overlay_nr + 1); | |
| /* now try to remove first overlay (it should fail) */ | |
| ovcs_id = save_ovcs_id[0]; | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8"); | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: overlay #6 is not topmost"); | |
| ret = of_overlay_remove(&ovcs_id); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: overlay #6 is not topmost"); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8"); | |
| if (!ret) { | |
| /* | |
| * Should never get here. If we do, expect a lot of | |
| * subsequent tracking and overlay removal related errors. | |
| */ | |
| unittest(0, "%s was destroyed @\"%s\"\n", | |
| overlay_name_from_nr(overlay_nr + 0), | |
| unittest_path(unittest_nr, | |
| PDEV_OVERLAY)); | |
| return; | |
| } | |
| /* removing them in order should work */ | |
| for (i = 1; i >= 0; i--) { | |
| ovcs_id = save_ovcs_id[i]; | |
| if (of_overlay_remove(&ovcs_id)) { | |
| unittest(0, "%s not destroyed @\"%s\"\n", | |
| overlay_name_from_nr(overlay_nr + i), | |
| unittest_path(unittest_nr, | |
| PDEV_OVERLAY)); | |
| return; | |
| } | |
| of_unittest_untrack_overlay(save_ovcs_id[i]); | |
| } | |
| unittest(1, "overlay test %d passed\n", 8); | |
| } | |
| /* test insertion of a bus with parent devices */ | |
| static void __init of_unittest_overlay_10(void) | |
| { | |
| int ret; | |
| char *child_path; | |
| /* device should disable */ | |
| ret = of_unittest_apply_overlay_check(10, 10, 0, 1, PDEV_OVERLAY); | |
| if (unittest(ret == 0, | |
| "overlay test %d failed; overlay application\n", 10)) | |
| return; | |
| child_path = kasprintf(GFP_KERNEL, "%s/test-unittest101", | |
| unittest_path(10, PDEV_OVERLAY)); | |
| if (unittest(child_path, "overlay test %d failed; kasprintf\n", 10)) | |
| return; | |
| ret = of_path_device_type_exists(child_path, PDEV_OVERLAY); | |
| kfree(child_path); | |
| unittest(ret, "overlay test %d failed; no child device\n", 10); | |
| } | |
| /* test insertion of a bus with parent devices (and revert) */ | |
| static void __init of_unittest_overlay_11(void) | |
| { | |
| int ret; | |
| /* device should disable */ | |
| ret = of_unittest_apply_revert_overlay_check(11, 11, 0, 1, | |
| PDEV_OVERLAY); | |
| unittest(ret == 0, "overlay test %d failed; overlay apply\n", 11); | |
| } | |
| #if IS_BUILTIN(CONFIG_I2C) && IS_ENABLED(CONFIG_OF_OVERLAY) | |
| struct unittest_i2c_bus_data { | |
| struct platform_device *pdev; | |
| struct i2c_adapter adap; | |
| }; | |
| static int unittest_i2c_master_xfer(struct i2c_adapter *adap, | |
| struct i2c_msg *msgs, int num) | |
| { | |
| struct unittest_i2c_bus_data *std = i2c_get_adapdata(adap); | |
| (void)std; | |
| return num; | |
| } | |
| static u32 unittest_i2c_functionality(struct i2c_adapter *adap) | |
| { | |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | |
| } | |
| static const struct i2c_algorithm unittest_i2c_algo = { | |
| .master_xfer = unittest_i2c_master_xfer, | |
| .functionality = unittest_i2c_functionality, | |
| }; | |
| static int unittest_i2c_bus_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| struct unittest_i2c_bus_data *std; | |
| struct i2c_adapter *adap; | |
| int ret; | |
| if (np == NULL) { | |
| dev_err(dev, "No OF data for device\n"); | |
| return -EINVAL; | |
| } | |
| dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | |
| std = devm_kzalloc(dev, sizeof(*std), GFP_KERNEL); | |
| if (!std) | |
| return -ENOMEM; | |
| /* link them together */ | |
| std->pdev = pdev; | |
| platform_set_drvdata(pdev, std); | |
| adap = &std->adap; | |
| i2c_set_adapdata(adap, std); | |
| adap->nr = -1; | |
| strscpy(adap->name, pdev->name, sizeof(adap->name)); | |
| adap->class = I2C_CLASS_DEPRECATED; | |
| adap->algo = &unittest_i2c_algo; | |
| adap->dev.parent = dev; | |
| adap->dev.of_node = dev->of_node; | |
| adap->timeout = 5 * HZ; | |
| adap->retries = 3; | |
| ret = i2c_add_numbered_adapter(adap); | |
| if (ret != 0) { | |
| dev_err(dev, "Failed to add I2C adapter\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void unittest_i2c_bus_remove(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| struct unittest_i2c_bus_data *std = platform_get_drvdata(pdev); | |
| dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | |
| i2c_del_adapter(&std->adap); | |
| } | |
| static const struct of_device_id unittest_i2c_bus_match[] = { | |
| { .compatible = "unittest-i2c-bus", }, | |
| {}, | |
| }; | |
| static struct platform_driver unittest_i2c_bus_driver = { | |
| .probe = unittest_i2c_bus_probe, | |
| .remove = unittest_i2c_bus_remove, | |
| .driver = { | |
| .name = "unittest-i2c-bus", | |
| .of_match_table = unittest_i2c_bus_match, | |
| }, | |
| }; | |
| static int unittest_i2c_dev_probe(struct i2c_client *client) | |
| { | |
| struct device *dev = &client->dev; | |
| struct device_node *np = client->dev.of_node; | |
| if (!np) { | |
| dev_err(dev, "No OF node\n"); | |
| return -EINVAL; | |
| } | |
| dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | |
| return 0; | |
| }; | |
| static void unittest_i2c_dev_remove(struct i2c_client *client) | |
| { | |
| struct device *dev = &client->dev; | |
| struct device_node *np = client->dev.of_node; | |
| dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | |
| } | |
| static const struct i2c_device_id unittest_i2c_dev_id[] = { | |
| { .name = "unittest-i2c-dev" }, | |
| { } | |
| }; | |
| static struct i2c_driver unittest_i2c_dev_driver = { | |
| .driver = { | |
| .name = "unittest-i2c-dev", | |
| }, | |
| .probe = unittest_i2c_dev_probe, | |
| .remove = unittest_i2c_dev_remove, | |
| .id_table = unittest_i2c_dev_id, | |
| }; | |
| #if IS_BUILTIN(CONFIG_I2C_MUX) | |
| static int unittest_i2c_mux_select_chan(struct i2c_mux_core *muxc, u32 chan) | |
| { | |
| return 0; | |
| } | |
| static int unittest_i2c_mux_probe(struct i2c_client *client) | |
| { | |
| int i, nchans; | |
| struct device *dev = &client->dev; | |
| struct i2c_adapter *adap = client->adapter; | |
| struct device_node *np = client->dev.of_node, *child; | |
| struct i2c_mux_core *muxc; | |
| u32 reg, max_reg; | |
| dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | |
| if (!np) { | |
| dev_err(dev, "No OF node\n"); | |
| return -EINVAL; | |
| } | |
| max_reg = (u32)-1; | |
| for_each_child_of_node(np, child) { | |
| if (of_property_read_u32(child, "reg", ®)) | |
| continue; | |
| if (max_reg == (u32)-1 || reg > max_reg) | |
| max_reg = reg; | |
| } | |
| nchans = max_reg == (u32)-1 ? 0 : max_reg + 1; | |
| if (nchans == 0) { | |
| dev_err(dev, "No channels\n"); | |
| return -EINVAL; | |
| } | |
| muxc = i2c_mux_alloc(adap, dev, nchans, 0, 0, | |
| unittest_i2c_mux_select_chan, NULL); | |
| if (!muxc) | |
| return -ENOMEM; | |
| for (i = 0; i < nchans; i++) { | |
| if (i2c_mux_add_adapter(muxc, 0, i)) { | |
| dev_err(dev, "Failed to register mux #%d\n", i); | |
| i2c_mux_del_adapters(muxc); | |
| return -ENODEV; | |
| } | |
| } | |
| i2c_set_clientdata(client, muxc); | |
| return 0; | |
| }; | |
| static void unittest_i2c_mux_remove(struct i2c_client *client) | |
| { | |
| struct device *dev = &client->dev; | |
| struct device_node *np = client->dev.of_node; | |
| struct i2c_mux_core *muxc = i2c_get_clientdata(client); | |
| dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | |
| i2c_mux_del_adapters(muxc); | |
| } | |
| static const struct i2c_device_id unittest_i2c_mux_id[] = { | |
| { .name = "unittest-i2c-mux" }, | |
| { } | |
| }; | |
| static struct i2c_driver unittest_i2c_mux_driver = { | |
| .driver = { | |
| .name = "unittest-i2c-mux", | |
| }, | |
| .probe = unittest_i2c_mux_probe, | |
| .remove = unittest_i2c_mux_remove, | |
| .id_table = unittest_i2c_mux_id, | |
| }; | |
| #endif | |
| static int of_unittest_overlay_i2c_init(void) | |
| { | |
| int ret; | |
| ret = i2c_add_driver(&unittest_i2c_dev_driver); | |
| if (unittest(ret == 0, | |
| "could not register unittest i2c device driver\n")) | |
| return ret; | |
| ret = platform_driver_register(&unittest_i2c_bus_driver); | |
| if (unittest(ret == 0, | |
| "could not register unittest i2c bus driver\n")) | |
| return ret; | |
| #if IS_BUILTIN(CONFIG_I2C_MUX) | |
| EXPECT_BEGIN(KERN_INFO, | |
| "i2c i2c-1: Added multiplexed i2c bus 2"); | |
| ret = i2c_add_driver(&unittest_i2c_mux_driver); | |
| EXPECT_END(KERN_INFO, | |
| "i2c i2c-1: Added multiplexed i2c bus 2"); | |
| if (unittest(ret == 0, | |
| "could not register unittest i2c mux driver\n")) | |
| return ret; | |
| #endif | |
| return 0; | |
| } | |
| static void of_unittest_overlay_i2c_cleanup(void) | |
| { | |
| #if IS_BUILTIN(CONFIG_I2C_MUX) | |
| i2c_del_driver(&unittest_i2c_mux_driver); | |
| #endif | |
| platform_driver_unregister(&unittest_i2c_bus_driver); | |
| i2c_del_driver(&unittest_i2c_dev_driver); | |
| } | |
| static void __init of_unittest_overlay_i2c_12(void) | |
| { | |
| int ret; | |
| /* device should enable */ | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12/status"); | |
| ret = of_unittest_apply_overlay_check(12, 12, 0, 1, I2C_OVERLAY); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12/status"); | |
| if (ret) | |
| return; | |
| unittest(1, "overlay test %d passed\n", 12); | |
| } | |
| /* test deactivation of device */ | |
| static void __init of_unittest_overlay_i2c_13(void) | |
| { | |
| int ret; | |
| EXPECT_BEGIN(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13/status"); | |
| /* device should disable */ | |
| ret = of_unittest_apply_overlay_check(13, 13, 1, 0, I2C_OVERLAY); | |
| EXPECT_END(KERN_INFO, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13/status"); | |
| if (ret) | |
| return; | |
| unittest(1, "overlay test %d passed\n", 13); | |
| } | |
| /* just check for i2c mux existence */ | |
| static void of_unittest_overlay_i2c_14(void) | |
| { | |
| } | |
| static void __init of_unittest_overlay_i2c_15(void) | |
| { | |
| int ret; | |
| /* device should enable */ | |
| EXPECT_BEGIN(KERN_INFO, | |
| "i2c i2c-1: Added multiplexed i2c bus 3"); | |
| ret = of_unittest_apply_overlay_check(15, 15, 0, 1, I2C_OVERLAY); | |
| EXPECT_END(KERN_INFO, | |
| "i2c i2c-1: Added multiplexed i2c bus 3"); | |
| if (ret) | |
| return; | |
| unittest(1, "overlay test %d passed\n", 15); | |
| } | |
| #else | |
| static inline void of_unittest_overlay_i2c_14(void) { } | |
| static inline void of_unittest_overlay_i2c_15(void) { } | |
| #endif | |
| static int of_notify(struct notifier_block *nb, unsigned long action, | |
| void *arg) | |
| { | |
| struct of_overlay_notify_data *nd = arg; | |
| struct device_node *found; | |
| int ret; | |
| /* | |
| * For overlay_16 .. overlay_19, check that returning an error | |
| * works for each of the actions by setting an arbitrary return | |
| * error number that matches the test number. e.g. for unittest16, | |
| * ret = -EBUSY which is -16. | |
| * | |
| * OVERLAY_INFO() for the overlays is declared to expect the same | |
| * error number, so overlay_data_apply() will return no error. | |
| * | |
| * overlay_20 will return NOTIFY_DONE | |
| */ | |
| ret = 0; | |
| of_node_get(nd->overlay); | |
| switch (action) { | |
| case OF_OVERLAY_PRE_APPLY: | |
| found = of_find_node_by_name(nd->overlay, "test-unittest16"); | |
| if (found) { | |
| of_node_put(found); | |
| ret = -EBUSY; | |
| } | |
| break; | |
| case OF_OVERLAY_POST_APPLY: | |
| found = of_find_node_by_name(nd->overlay, "test-unittest17"); | |
| if (found) { | |
| of_node_put(found); | |
| ret = -EEXIST; | |
| } | |
| break; | |
| case OF_OVERLAY_PRE_REMOVE: | |
| found = of_find_node_by_name(nd->overlay, "test-unittest18"); | |
| if (found) { | |
| of_node_put(found); | |
| ret = -EXDEV; | |
| } | |
| break; | |
| case OF_OVERLAY_POST_REMOVE: | |
| found = of_find_node_by_name(nd->overlay, "test-unittest19"); | |
| if (found) { | |
| of_node_put(found); | |
| ret = -ENODEV; | |
| } | |
| break; | |
| default: /* should not happen */ | |
| of_node_put(nd->overlay); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (ret) | |
| return notifier_from_errno(ret); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block of_nb = { | |
| .notifier_call = of_notify, | |
| }; | |
| static void __init of_unittest_overlay_notify(void) | |
| { | |
| int ovcs_id; | |
| int ret; | |
| ret = of_overlay_notifier_register(&of_nb); | |
| unittest(!ret, | |
| "of_overlay_notifier_register() failed, ret = %d\n", ret); | |
| if (ret) | |
| return; | |
| /* | |
| * The overlays are applied by overlay_data_apply() | |
| * instead of of_unittest_apply_overlay() so that they | |
| * will not be tracked. Thus they will not be removed | |
| * by of_unittest_remove_tracked_overlays(). | |
| * | |
| * Applying overlays 16 - 19 will each trigger an error for a | |
| * different action in of_notify(). | |
| * | |
| * Applying overlay 20 will not trigger any error in of_notify(). | |
| */ | |
| /* --- overlay 16 --- */ | |
| EXPECT_BEGIN(KERN_INFO, "OF: overlay: overlay changeset pre-apply notifier error -16, target: /testcase-data/overlay-node/test-bus"); | |
| unittest(overlay_data_apply("overlay_16", &ovcs_id), | |
| "test OF_OVERLAY_PRE_APPLY notify injected error\n"); | |
| EXPECT_END(KERN_INFO, "OF: overlay: overlay changeset pre-apply notifier error -16, target: /testcase-data/overlay-node/test-bus"); | |
| unittest(ovcs_id, "ovcs_id not created for overlay_16\n"); | |
| /* --- overlay 17 --- */ | |
| EXPECT_BEGIN(KERN_INFO, "OF: overlay: overlay changeset post-apply notifier error -17, target: /testcase-data/overlay-node/test-bus"); | |
| unittest(overlay_data_apply("overlay_17", &ovcs_id), | |
| "test OF_OVERLAY_POST_APPLY notify injected error\n"); | |
| EXPECT_END(KERN_INFO, "OF: overlay: overlay changeset post-apply notifier error -17, target: /testcase-data/overlay-node/test-bus"); | |
| unittest(ovcs_id, "ovcs_id not created for overlay_17\n"); | |
| /* --- overlay 18 --- */ | |
| unittest(overlay_data_apply("overlay_18", &ovcs_id), | |
| "OF_OVERLAY_PRE_REMOVE notify injected error\n"); | |
| unittest(ovcs_id, "ovcs_id not created for overlay_18\n"); | |
| if (ovcs_id) { | |
| EXPECT_BEGIN(KERN_INFO, "OF: overlay: overlay changeset pre-remove notifier error -18, target: /testcase-data/overlay-node/test-bus"); | |
| ret = of_overlay_remove(&ovcs_id); | |
| EXPECT_END(KERN_INFO, "OF: overlay: overlay changeset pre-remove notifier error -18, target: /testcase-data/overlay-node/test-bus"); | |
| if (ret == -EXDEV) { | |
| /* | |
| * change set ovcs_id should still exist | |
| */ | |
| unittest(1, "overlay_18 of_overlay_remove() injected error for OF_OVERLAY_PRE_REMOVE\n"); | |
| } else { | |
| unittest(0, "overlay_18 of_overlay_remove() injected error for OF_OVERLAY_PRE_REMOVE not returned\n"); | |
| } | |
| } else { | |
| unittest(1, "ovcs_id not created for overlay_18\n"); | |
| } | |
| unittest(ovcs_id, "ovcs_id removed for overlay_18\n"); | |
| /* --- overlay 19 --- */ | |
| unittest(overlay_data_apply("overlay_19", &ovcs_id), | |
| "OF_OVERLAY_POST_REMOVE notify injected error\n"); | |
| unittest(ovcs_id, "ovcs_id not created for overlay_19\n"); | |
| if (ovcs_id) { | |
| EXPECT_BEGIN(KERN_INFO, "OF: overlay: overlay changeset post-remove notifier error -19, target: /testcase-data/overlay-node/test-bus"); | |
| ret = of_overlay_remove(&ovcs_id); | |
| EXPECT_END(KERN_INFO, "OF: overlay: overlay changeset post-remove notifier error -19, target: /testcase-data/overlay-node/test-bus"); | |
| if (ret == -ENODEV) | |
| unittest(1, "overlay_19 of_overlay_remove() injected error for OF_OVERLAY_POST_REMOVE\n"); | |
| else | |
| unittest(0, "overlay_19 of_overlay_remove() injected error for OF_OVERLAY_POST_REMOVE not returned\n"); | |
| } else { | |
| unittest(1, "ovcs_id removed for overlay_19\n"); | |
| } | |
| unittest(!ovcs_id, "changeset ovcs_id = %d not removed for overlay_19\n", | |
| ovcs_id); | |
| /* --- overlay 20 --- */ | |
| unittest(overlay_data_apply("overlay_20", &ovcs_id), | |
| "overlay notify no injected error\n"); | |
| if (ovcs_id) { | |
| ret = of_overlay_remove(&ovcs_id); | |
| if (ret) | |
| unittest(1, "overlay_20 failed to be destroyed, ret = %d\n", | |
| ret); | |
| } else { | |
| unittest(1, "ovcs_id not created for overlay_20\n"); | |
| } | |
| unittest(!of_overlay_notifier_unregister(&of_nb), | |
| "of_overlay_notifier_unregister() failed, ret = %d\n", ret); | |
| } | |
| static void __init of_unittest_overlay(void) | |
| { | |
| struct device_node *bus_np = NULL; | |
| unsigned int i; | |
| if (platform_driver_register(&unittest_driver)) { | |
| unittest(0, "could not register unittest driver\n"); | |
| goto out; | |
| } | |
| bus_np = of_find_node_by_path(bus_path); | |
| if (bus_np == NULL) { | |
| unittest(0, "could not find bus_path \"%s\"\n", bus_path); | |
| goto out; | |
| } | |
| if (of_platform_default_populate(bus_np, NULL, NULL)) { | |
| unittest(0, "could not populate bus @ \"%s\"\n", bus_path); | |
| goto out; | |
| } | |
| if (!of_unittest_device_exists(100, PDEV_OVERLAY)) { | |
| unittest(0, "could not find unittest0 @ \"%s\"\n", | |
| unittest_path(100, PDEV_OVERLAY)); | |
| goto out; | |
| } | |
| if (of_unittest_device_exists(101, PDEV_OVERLAY)) { | |
| unittest(0, "unittest1 @ \"%s\" should not exist\n", | |
| unittest_path(101, PDEV_OVERLAY)); | |
| goto out; | |
| } | |
| unittest(1, "basic infrastructure of overlays passed"); | |
| /* tests in sequence */ | |
| of_unittest_overlay_0(); | |
| of_unittest_overlay_1(); | |
| of_unittest_overlay_2(); | |
| of_unittest_overlay_3(); | |
| of_unittest_overlay_4(); | |
| for (i = 0; i < 3; i++) | |
| of_unittest_overlay_5(); | |
| of_unittest_overlay_6(); | |
| of_unittest_overlay_8(); | |
| of_unittest_overlay_10(); | |
| of_unittest_overlay_11(); | |
| #if IS_BUILTIN(CONFIG_I2C) | |
| if (unittest(of_unittest_overlay_i2c_init() == 0, "i2c init failed\n")) | |
| goto out; | |
| of_unittest_overlay_i2c_12(); | |
| of_unittest_overlay_i2c_13(); | |
| of_unittest_overlay_i2c_14(); | |
| of_unittest_overlay_i2c_15(); | |
| of_unittest_overlay_i2c_cleanup(); | |
| #endif | |
| of_unittest_overlay_gpio(); | |
| of_unittest_remove_tracked_overlays(); | |
| of_unittest_overlay_notify(); | |
| out: | |
| of_node_put(bus_np); | |
| } | |
| #else | |
| static inline void __init of_unittest_overlay(void) { } | |
| #endif | |
| static void __init of_unittest_lifecycle(void) | |
| { | |
| #ifdef CONFIG_OF_DYNAMIC | |
| unsigned int refcount; | |
| int found_refcount_one = 0; | |
| int put_count = 0; | |
| struct device_node *np; | |
| struct device_node *prev_sibling, *next_sibling; | |
| const char *refcount_path = "/testcase-data/refcount-node"; | |
| const char *refcount_parent_path = "/testcase-data"; | |
| /* | |
| * Node lifecycle tests, non-dynamic node: | |
| * | |
| * - Decrementing refcount to zero via of_node_put() should cause the | |
| * attempt to free the node memory by of_node_release() to fail | |
| * because the node is not a dynamic node. | |
| * | |
| * - Decrementing refcount past zero should result in additional | |
| * errors reported. | |
| */ | |
| np = of_find_node_by_path(refcount_path); | |
| unittest(np, "find refcount_path \"%s\"\n", refcount_path); | |
| if (np == NULL) | |
| goto out_skip_tests; | |
| while (!found_refcount_one) { | |
| if (put_count++ > 10) { | |
| unittest(0, "guardrail to avoid infinite loop\n"); | |
| goto out_skip_tests; | |
| } | |
| refcount = kref_read(&np->kobj.kref); | |
| if (refcount == 1) | |
| found_refcount_one = 1; | |
| else | |
| of_node_put(np); | |
| } | |
| EXPECT_BEGIN(KERN_INFO, "OF: ERROR: of_node_release() detected bad of_node_put() on /testcase-data/refcount-node"); | |
| /* | |
| * refcount is now one, decrementing to zero will result in a call to | |
| * of_node_release() to free the node's memory, which should result | |
| * in an error | |
| */ | |
| unittest(1, "/testcase-data/refcount-node is one"); | |
| of_node_put(np); | |
| EXPECT_END(KERN_INFO, "OF: ERROR: of_node_release() detected bad of_node_put() on /testcase-data/refcount-node"); | |
| /* | |
| * expect stack trace for subsequent of_node_put(): | |
| * __refcount_sub_and_test() calls: | |
| * refcount_warn_saturate(r, REFCOUNT_SUB_UAF) | |
| * | |
| * Not capturing entire WARN_ONCE() trace with EXPECT_*(), just | |
| * the first three lines, and the last line. | |
| */ | |
| EXPECT_BEGIN(KERN_INFO, "------------[ cut here ]------------"); | |
| EXPECT_BEGIN(KERN_INFO, "WARNING: <<all>>"); | |
| EXPECT_BEGIN(KERN_INFO, "refcount_t: underflow; use-after-free."); | |
| EXPECT_BEGIN(KERN_INFO, "---[ end trace <<int>> ]---"); | |
| /* refcount is now zero, this should fail */ | |
| unittest(1, "/testcase-data/refcount-node is zero"); | |
| of_node_put(np); | |
| EXPECT_END(KERN_INFO, "---[ end trace <<int>> ]---"); | |
| EXPECT_END(KERN_INFO, "refcount_t: underflow; use-after-free."); | |
| EXPECT_END(KERN_INFO, "WARNING: <<all>>"); | |
| EXPECT_END(KERN_INFO, "------------[ cut here ]------------"); | |
| /* | |
| * Q. do we expect to get yet another warning? | |
| * A. no, the WARNING is from WARN_ONCE() | |
| */ | |
| EXPECT_NOT_BEGIN(KERN_INFO, "------------[ cut here ]------------"); | |
| EXPECT_NOT_BEGIN(KERN_INFO, "WARNING: <<all>>"); | |
| EXPECT_NOT_BEGIN(KERN_INFO, "refcount_t: underflow; use-after-free."); | |
| EXPECT_NOT_BEGIN(KERN_INFO, "---[ end trace <<int>> ]---"); | |
| unittest(1, "/testcase-data/refcount-node is zero, second time"); | |
| of_node_put(np); | |
| EXPECT_NOT_END(KERN_INFO, "---[ end trace <<int>> ]---"); | |
| EXPECT_NOT_END(KERN_INFO, "refcount_t: underflow; use-after-free."); | |
| EXPECT_NOT_END(KERN_INFO, "WARNING: <<all>>"); | |
| EXPECT_NOT_END(KERN_INFO, "------------[ cut here ]------------"); | |
| /* | |
| * refcount of zero will trigger stack traces from any further | |
| * attempt to of_node_get() node "refcount-node". One example of | |
| * this is where of_unittest_check_node_linkage() will recursively | |
| * scan the tree, with 'for_each_child_of_node()' doing an | |
| * of_node_get() of the children of a node. | |
| * | |
| * Prevent the stack trace by removing node "refcount-node" from | |
| * its parent's child list. | |
| * | |
| * WARNING: EVIL, EVIL, EVIL: | |
| * | |
| * Directly manipulate the child list of node /testcase-data to | |
| * remove child refcount-node. This is ignoring all proper methods | |
| * of removing a child and will leak a small amount of memory. | |
| */ | |
| np = of_find_node_by_path(refcount_parent_path); | |
| unittest(np, "find refcount_parent_path \"%s\"\n", refcount_parent_path); | |
| unittest(np, "ERROR: devicetree live tree left in a 'bad state' if test fail\n"); | |
| if (np == NULL) | |
| return; | |
| prev_sibling = np->child; | |
| next_sibling = prev_sibling->sibling; | |
| if (!strcmp(prev_sibling->full_name, "refcount-node")) { | |
| np->child = next_sibling; | |
| next_sibling = next_sibling->sibling; | |
| } | |
| while (next_sibling) { | |
| if (!strcmp(next_sibling->full_name, "refcount-node")) | |
| prev_sibling->sibling = next_sibling->sibling; | |
| prev_sibling = next_sibling; | |
| next_sibling = next_sibling->sibling; | |
| } | |
| of_node_put(np); | |
| return; | |
| out_skip_tests: | |
| #endif | |
| unittest(0, "One or more lifecycle tests skipped\n"); | |
| } | |
| #ifdef CONFIG_OF_OVERLAY | |
| /* | |
| * __dtbo_##overlay_name##_begin[] and __dtbo_##overlay_name##_end[] are | |
| * created by cmd_wrap_S_dtbo in scripts/Makefile.dtbs | |
| */ | |
| #define OVERLAY_INFO_EXTERN(overlay_name) \ | |
| extern uint8_t __dtbo_##overlay_name##_begin[]; \ | |
| extern uint8_t __dtbo_##overlay_name##_end[] | |
| #define OVERLAY_INFO(overlay_name, expected, expected_remove) \ | |
| { .dtbo_begin = __dtbo_##overlay_name##_begin, \ | |
| .dtbo_end = __dtbo_##overlay_name##_end, \ | |
| .expected_result = expected, \ | |
| .expected_result_remove = expected_remove, \ | |
| .name = #overlay_name, \ | |
| } | |
| struct overlay_info { | |
| uint8_t *dtbo_begin; | |
| uint8_t *dtbo_end; | |
| int expected_result; | |
| int expected_result_remove; /* if apply failed */ | |
| int ovcs_id; | |
| char *name; | |
| }; | |
| OVERLAY_INFO_EXTERN(overlay_base); | |
| OVERLAY_INFO_EXTERN(overlay); | |
| OVERLAY_INFO_EXTERN(overlay_0); | |
| OVERLAY_INFO_EXTERN(overlay_1); | |
| OVERLAY_INFO_EXTERN(overlay_2); | |
| OVERLAY_INFO_EXTERN(overlay_3); | |
| OVERLAY_INFO_EXTERN(overlay_4); | |
| OVERLAY_INFO_EXTERN(overlay_5); | |
| OVERLAY_INFO_EXTERN(overlay_6); | |
| OVERLAY_INFO_EXTERN(overlay_7); | |
| OVERLAY_INFO_EXTERN(overlay_8); | |
| OVERLAY_INFO_EXTERN(overlay_9); | |
| OVERLAY_INFO_EXTERN(overlay_10); | |
| OVERLAY_INFO_EXTERN(overlay_11); | |
| OVERLAY_INFO_EXTERN(overlay_12); | |
| OVERLAY_INFO_EXTERN(overlay_13); | |
| OVERLAY_INFO_EXTERN(overlay_15); | |
| OVERLAY_INFO_EXTERN(overlay_16); | |
| OVERLAY_INFO_EXTERN(overlay_17); | |
| OVERLAY_INFO_EXTERN(overlay_18); | |
| OVERLAY_INFO_EXTERN(overlay_19); | |
| OVERLAY_INFO_EXTERN(overlay_20); | |
| OVERLAY_INFO_EXTERN(overlay_gpio_01); | |
| OVERLAY_INFO_EXTERN(overlay_gpio_02a); | |
| OVERLAY_INFO_EXTERN(overlay_gpio_02b); | |
| OVERLAY_INFO_EXTERN(overlay_gpio_03); | |
| OVERLAY_INFO_EXTERN(overlay_gpio_04a); | |
| OVERLAY_INFO_EXTERN(overlay_gpio_04b); | |
| OVERLAY_INFO_EXTERN(overlay_pci_node); | |
| OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node); | |
| OVERLAY_INFO_EXTERN(overlay_bad_add_dup_prop); | |
| OVERLAY_INFO_EXTERN(overlay_bad_phandle); | |
| OVERLAY_INFO_EXTERN(overlay_bad_symbol); | |
| OVERLAY_INFO_EXTERN(overlay_bad_unresolved); | |
| /* entries found by name */ | |
| static struct overlay_info overlays[] = { | |
| OVERLAY_INFO(overlay_base, -9999, 0), | |
| OVERLAY_INFO(overlay, 0, 0), | |
| OVERLAY_INFO(overlay_0, 0, 0), | |
| OVERLAY_INFO(overlay_1, 0, 0), | |
| OVERLAY_INFO(overlay_2, 0, 0), | |
| OVERLAY_INFO(overlay_3, 0, 0), | |
| OVERLAY_INFO(overlay_4, 0, 0), | |
| OVERLAY_INFO(overlay_5, 0, 0), | |
| OVERLAY_INFO(overlay_6, 0, 0), | |
| OVERLAY_INFO(overlay_7, 0, 0), | |
| OVERLAY_INFO(overlay_8, 0, 0), | |
| OVERLAY_INFO(overlay_9, 0, 0), | |
| OVERLAY_INFO(overlay_10, 0, 0), | |
| OVERLAY_INFO(overlay_11, 0, 0), | |
| OVERLAY_INFO(overlay_12, 0, 0), | |
| OVERLAY_INFO(overlay_13, 0, 0), | |
| OVERLAY_INFO(overlay_15, 0, 0), | |
| OVERLAY_INFO(overlay_16, -EBUSY, 0), | |
| OVERLAY_INFO(overlay_17, -EEXIST, 0), | |
| OVERLAY_INFO(overlay_18, 0, 0), | |
| OVERLAY_INFO(overlay_19, 0, 0), | |
| OVERLAY_INFO(overlay_20, 0, 0), | |
| OVERLAY_INFO(overlay_gpio_01, 0, 0), | |
| OVERLAY_INFO(overlay_gpio_02a, 0, 0), | |
| OVERLAY_INFO(overlay_gpio_02b, 0, 0), | |
| OVERLAY_INFO(overlay_gpio_03, 0, 0), | |
| OVERLAY_INFO(overlay_gpio_04a, 0, 0), | |
| OVERLAY_INFO(overlay_gpio_04b, 0, 0), | |
| OVERLAY_INFO(overlay_pci_node, 0, 0), | |
| OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL, -ENODEV), | |
| OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL, -ENODEV), | |
| OVERLAY_INFO(overlay_bad_phandle, -EINVAL, 0), | |
| OVERLAY_INFO(overlay_bad_symbol, -EINVAL, -ENODEV), | |
| OVERLAY_INFO(overlay_bad_unresolved, -EINVAL, 0), | |
| /* end marker */ | |
| { } | |
| }; | |
| static struct device_node *overlay_base_root; | |
| static void * __init dt_alloc_memory(u64 size, u64 align) | |
| { | |
| return memblock_alloc_or_panic(size, align); | |
| } | |
| /* | |
| * Create base device tree for the overlay unittest. | |
| * | |
| * This is called from very early boot code. | |
| * | |
| * Do as much as possible the same way as done in __unflatten_device_tree | |
| * and other early boot steps for the normal FDT so that the overlay base | |
| * unflattened tree will have the same characteristics as the real tree | |
| * (such as having memory allocated by the early allocator). The goal | |
| * is to test "the real thing" as much as possible, and test "test setup | |
| * code" as little as possible. | |
| * | |
| * Have to stop before resolving phandles, because that uses kmalloc. | |
| */ | |
| void __init unittest_unflatten_overlay_base(void) | |
| { | |
| struct overlay_info *info; | |
| u32 data_size; | |
| void *new_fdt; | |
| u32 size; | |
| int found = 0; | |
| const char *overlay_name = "overlay_base"; | |
| for (info = overlays; info && info->name; info++) { | |
| if (!strcmp(overlay_name, info->name)) { | |
| found = 1; | |
| break; | |
| } | |
| } | |
| if (!found) { | |
| pr_err("no overlay data for %s\n", overlay_name); | |
| return; | |
| } | |
| info = &overlays[0]; | |
| if (info->expected_result != -9999) { | |
| pr_err("No dtb 'overlay_base' to attach\n"); | |
| return; | |
| } | |
| data_size = info->dtbo_end - info->dtbo_begin; | |
| if (!data_size) { | |
| pr_err("No dtb 'overlay_base' to attach\n"); | |
| return; | |
| } | |
| size = fdt_totalsize(info->dtbo_begin); | |
| if (size != data_size) { | |
| pr_err("dtb 'overlay_base' header totalsize != actual size"); | |
| return; | |
| } | |
| new_fdt = dt_alloc_memory(size, roundup_pow_of_two(FDT_V17_SIZE)); | |
| if (!new_fdt) { | |
| pr_err("alloc for dtb 'overlay_base' failed"); | |
| return; | |
| } | |
| memcpy(new_fdt, info->dtbo_begin, size); | |
| __unflatten_device_tree(new_fdt, NULL, &overlay_base_root, | |
| dt_alloc_memory, true); | |
| } | |
| /* | |
| * The purpose of of_unittest_overlay_data_add is to add an | |
| * overlay in the normal fashion. This is a test of the whole | |
| * picture, instead of testing individual elements. | |
| * | |
| * A secondary purpose is to be able to verify that the contents of | |
| * /proc/device-tree/ contains the updated structure and values from | |
| * the overlay. That must be verified separately in user space. | |
| * | |
| * Return 0 on unexpected error. | |
| */ | |
| static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id) | |
| { | |
| struct overlay_info *info; | |
| int passed = 1; | |
| int found = 0; | |
| int ret, ret2; | |
| u32 size; | |
| for (info = overlays; info && info->name; info++) { | |
| if (!strcmp(overlay_name, info->name)) { | |
| found = 1; | |
| break; | |
| } | |
| } | |
| if (!found) { | |
| pr_err("no overlay data for %s\n", overlay_name); | |
| return 0; | |
| } | |
| size = info->dtbo_end - info->dtbo_begin; | |
| if (!size) | |
| pr_err("no overlay data for %s\n", overlay_name); | |
| ret = of_overlay_fdt_apply(info->dtbo_begin, size, &info->ovcs_id, | |
| NULL); | |
| if (ovcs_id) | |
| *ovcs_id = info->ovcs_id; | |
| if (ret < 0) | |
| goto out; | |
| pr_debug("%s applied\n", overlay_name); | |
| out: | |
| if (ret != info->expected_result) { | |
| pr_err("of_overlay_fdt_apply() expected %d, ret=%d, %s\n", | |
| info->expected_result, ret, overlay_name); | |
| passed = 0; | |
| } | |
| if (ret < 0) { | |
| /* changeset may be partially applied */ | |
| ret2 = of_overlay_remove(&info->ovcs_id); | |
| if (ret2 != info->expected_result_remove) { | |
| pr_err("of_overlay_remove() expected %d, ret=%d, %s\n", | |
| info->expected_result_remove, ret2, | |
| overlay_name); | |
| passed = 0; | |
| } | |
| } | |
| return passed; | |
| } | |
| /* | |
| * The purpose of of_unittest_overlay_high_level is to add an overlay | |
| * in the normal fashion. This is a test of the whole picture, | |
| * instead of individual elements. | |
| * | |
| * The first part of the function is _not_ normal overlay usage; it is | |
| * finishing splicing the base overlay device tree into the live tree. | |
| */ | |
| static __init void of_unittest_overlay_high_level(void) | |
| { | |
| struct device_node *last_sibling; | |
| struct device_node *np; | |
| struct device_node *of_symbols; | |
| struct device_node *overlay_base_symbols; | |
| struct device_node **pprev; | |
| struct property *prop; | |
| int ret; | |
| if (!overlay_base_root) { | |
| unittest(0, "overlay_base_root not initialized\n"); | |
| return; | |
| } | |
| /* | |
| * Could not fixup phandles in unittest_unflatten_overlay_base() | |
| * because kmalloc() was not yet available. | |
| */ | |
| of_overlay_mutex_lock(); | |
| of_resolve_phandles(overlay_base_root); | |
| of_overlay_mutex_unlock(); | |
| /* | |
| * do not allow overlay_base to duplicate any node already in | |
| * tree, this greatly simplifies the code | |
| */ | |
| /* | |
| * remove overlay_base_root node "__local_fixups", after | |
| * being used by of_resolve_phandles() | |
| */ | |
| pprev = &overlay_base_root->child; | |
| for (np = overlay_base_root->child; np; np = np->sibling) { | |
| if (of_node_name_eq(np, "__local_fixups__")) { | |
| *pprev = np->sibling; | |
| break; | |
| } | |
| pprev = &np->sibling; | |
| } | |
| /* remove overlay_base_root node "__symbols__" if in live tree */ | |
| of_symbols = of_get_child_by_name(of_root, "__symbols__"); | |
| if (of_symbols) { | |
| /* will have to graft properties from node into live tree */ | |
| pprev = &overlay_base_root->child; | |
| for (np = overlay_base_root->child; np; np = np->sibling) { | |
| if (of_node_name_eq(np, "__symbols__")) { | |
| overlay_base_symbols = np; | |
| *pprev = np->sibling; | |
| break; | |
| } | |
| pprev = &np->sibling; | |
| } | |
| } | |
| for_each_child_of_node(overlay_base_root, np) { | |
| struct device_node *base_child; | |
| for_each_child_of_node(of_root, base_child) { | |
| if (!strcmp(np->full_name, base_child->full_name)) { | |
| unittest(0, "illegal node name in overlay_base %pOFn", | |
| np); | |
| of_node_put(np); | |
| of_node_put(base_child); | |
| return; | |
| } | |
| } | |
| } | |
| /* | |
| * overlay 'overlay_base' is not allowed to have root | |
| * properties, so only need to splice nodes into main device tree. | |
| * | |
| * root node of *overlay_base_root will not be freed, it is lost | |
| * memory. | |
| */ | |
| for (np = overlay_base_root->child; np; np = np->sibling) | |
| np->parent = of_root; | |
| mutex_lock(&of_mutex); | |
| for (last_sibling = np = of_root->child; np; np = np->sibling) | |
| last_sibling = np; | |
| if (last_sibling) | |
| last_sibling->sibling = overlay_base_root->child; | |
| else | |
| of_root->child = overlay_base_root->child; | |
| for_each_of_allnodes_from(overlay_base_root, np) | |
| __of_attach_node_sysfs(np); | |
| if (of_symbols) { | |
| struct property *new_prop; | |
| for_each_property_of_node(overlay_base_symbols, prop) { | |
| new_prop = __of_prop_dup(prop, GFP_KERNEL); | |
| if (!new_prop) { | |
| unittest(0, "__of_prop_dup() of '%s' from overlay_base node __symbols__", | |
| prop->name); | |
| goto err_unlock; | |
| } | |
| if (__of_add_property(of_symbols, new_prop)) { | |
| __of_prop_free(new_prop); | |
| /* "name" auto-generated by unflatten */ | |
| if (!strcmp(prop->name, "name")) | |
| continue; | |
| unittest(0, "duplicate property '%s' in overlay_base node __symbols__", | |
| prop->name); | |
| goto err_unlock; | |
| } | |
| if (__of_add_property_sysfs(of_symbols, new_prop)) { | |
| unittest(0, "unable to add property '%s' in overlay_base node __symbols__ to sysfs", | |
| prop->name); | |
| goto err_unlock; | |
| } | |
| } | |
| } | |
| mutex_unlock(&of_mutex); | |
| /* now do the normal overlay usage test */ | |
| /* --- overlay --- */ | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/status"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@30/incline-up"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@40/incline-up"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/status"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/color"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/rate"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/hvac_2"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_left"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_right"); | |
| ret = overlay_data_apply("overlay", NULL); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_right"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_left"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/hvac_2"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/rate"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/color"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/status"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@40/incline-up"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@30/incline-up"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/status"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status"); | |
| unittest(ret, "Adding overlay 'overlay' failed\n"); | |
| /* --- overlay_bad_add_dup_node --- */ | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/motor-1/controller:name"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: Error reverting changeset (-19)"); | |
| unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL), | |
| "Adding overlay 'overlay_bad_add_dup_node' failed\n"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: Error reverting changeset (-19)"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/motor-1/controller:name"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller"); | |
| /* --- overlay_bad_add_dup_prop --- */ | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/motor-1/electric:name"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: Error reverting changeset (-19)"); | |
| unittest(overlay_data_apply("overlay_bad_add_dup_prop", NULL), | |
| "Adding overlay 'overlay_bad_add_dup_prop' failed\n"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: Error reverting changeset (-19)"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/motor-1/electric:name"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric"); | |
| /* --- overlay_bad_phandle --- */ | |
| unittest(overlay_data_apply("overlay_bad_phandle", NULL), | |
| "Adding overlay 'overlay_bad_phandle' failed\n"); | |
| /* --- overlay_bad_symbol --- */ | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/hvac-medium-2:name"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: Error reverting changeset (-19)"); | |
| unittest(overlay_data_apply("overlay_bad_symbol", NULL), | |
| "Adding overlay 'overlay_bad_symbol' failed\n"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: Error reverting changeset (-19)"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: changeset: apply failed: REMOVE_PROPERTY /testcase-data-2/substation@100/hvac-medium-2:name"); | |
| /* --- overlay_bad_unresolved --- */ | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: resolver: node label 'this_label_does_not_exist' not found in live devicetree symbols table"); | |
| EXPECT_BEGIN(KERN_ERR, | |
| "OF: resolver: overlay phandle fixup failed: -22"); | |
| unittest(overlay_data_apply("overlay_bad_unresolved", NULL), | |
| "Adding overlay 'overlay_bad_unresolved' failed\n"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: resolver: overlay phandle fixup failed: -22"); | |
| EXPECT_END(KERN_ERR, | |
| "OF: resolver: node label 'this_label_does_not_exist' not found in live devicetree symbols table"); | |
| return; | |
| err_unlock: | |
| mutex_unlock(&of_mutex); | |
| } | |
| static int of_unittest_pci_dev_num; | |
| static int of_unittest_pci_child_num; | |
| /* | |
| * PCI device tree node test driver | |
| */ | |
| static const struct pci_device_id testdrv_pci_ids[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_REDHAT, 0x5), }, /* PCI_VENDOR_ID_REDHAT */ | |
| { 0, } | |
| }; | |
| static int testdrv_probe(struct pci_dev *pdev, const struct pci_device_id *id) | |
| { | |
| struct overlay_info *info; | |
| struct device_node *dn; | |
| int ret, ovcs_id; | |
| u32 size; | |
| dn = pdev->dev.of_node; | |
| if (!dn) { | |
| dev_err(&pdev->dev, "does not find bus endpoint"); | |
| return -EINVAL; | |
| } | |
| for (info = overlays; info && info->name; info++) { | |
| if (!strcmp(info->name, "overlay_pci_node")) | |
| break; | |
| } | |
| if (!info || !info->name) { | |
| dev_err(&pdev->dev, "no overlay data for overlay_pci_node"); | |
| return -ENODEV; | |
| } | |
| size = info->dtbo_end - info->dtbo_begin; | |
| ret = of_overlay_fdt_apply(info->dtbo_begin, size, &ovcs_id, dn); | |
| if (ret) | |
| return ret; | |
| of_platform_default_populate(dn, NULL, &pdev->dev); | |
| pci_set_drvdata(pdev, (void *)(uintptr_t)ovcs_id); | |
| return 0; | |
| } | |
| static void testdrv_remove(struct pci_dev *pdev) | |
| { | |
| int ovcs_id = (int)(uintptr_t)pci_get_drvdata(pdev); | |
| of_platform_depopulate(&pdev->dev); | |
| of_overlay_remove(&ovcs_id); | |
| } | |
| static struct pci_driver testdrv_driver = { | |
| .name = "pci_dt_testdrv", | |
| .id_table = testdrv_pci_ids, | |
| .probe = testdrv_probe, | |
| .remove = testdrv_remove, | |
| }; | |
| static int unittest_pci_probe(struct platform_device *pdev) | |
| { | |
| struct resource *res; | |
| struct device *dev; | |
| u64 exp_addr; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) | |
| return -ENODEV; | |
| dev = &pdev->dev; | |
| while (dev && !dev_is_pci(dev)) | |
| dev = dev->parent; | |
| if (!dev) { | |
| pr_err("unable to find parent device\n"); | |
| return -ENODEV; | |
| } | |
| exp_addr = pci_resource_start(to_pci_dev(dev), 0) + 0x100; | |
| unittest(res->start == exp_addr, "Incorrect translated address %llx, expected %llx\n", | |
| (u64)res->start, exp_addr); | |
| of_unittest_pci_child_num++; | |
| return 0; | |
| } | |
| static const struct of_device_id unittest_pci_of_match[] = { | |
| { .compatible = "unittest-pci" }, | |
| { } | |
| }; | |
| static struct platform_driver unittest_pci_driver = { | |
| .probe = unittest_pci_probe, | |
| .driver = { | |
| .name = "unittest-pci", | |
| .of_match_table = unittest_pci_of_match, | |
| }, | |
| }; | |
| static int of_unittest_pci_node_verify(struct pci_dev *pdev, bool add) | |
| { | |
| struct device_node *pnp, *np = NULL; | |
| struct device *child_dev; | |
| char *path = NULL; | |
| const __be32 *reg; | |
| int rc = 0; | |
| pnp = pdev->dev.of_node; | |
| unittest(pnp, "Failed creating PCI dt node\n"); | |
| if (!pnp) | |
| return -ENODEV; | |
| if (add) { | |
| path = kasprintf(GFP_KERNEL, "%pOF/pci-ep-bus@0/unittest-pci@100", pnp); | |
| np = of_find_node_by_path(path); | |
| unittest(np, "Failed to get unittest-pci node under PCI node\n"); | |
| if (!np) { | |
| rc = -ENODEV; | |
| goto failed; | |
| } | |
| reg = of_get_property(np, "reg", NULL); | |
| unittest(reg, "Failed to get reg property\n"); | |
| if (!reg) | |
| rc = -ENODEV; | |
| } else { | |
| path = kasprintf(GFP_KERNEL, "%pOF/pci-ep-bus@0", pnp); | |
| np = of_find_node_by_path(path); | |
| unittest(!np, "Child device tree node is not removed\n"); | |
| child_dev = device_find_any_child(&pdev->dev); | |
| unittest(!child_dev, "Child device is not removed\n"); | |
| put_device(child_dev); | |
| } | |
| failed: | |
| kfree(path); | |
| if (np) | |
| of_node_put(np); | |
| return rc; | |
| } | |
| static void __init of_unittest_pci_node(void) | |
| { | |
| struct pci_dev *pdev = NULL; | |
| int rc; | |
| if (!IS_ENABLED(CONFIG_PCI_DYNAMIC_OF_NODES)) | |
| return; | |
| rc = pci_register_driver(&testdrv_driver); | |
| unittest(!rc, "Failed to register pci test driver; rc = %d\n", rc); | |
| if (rc) | |
| return; | |
| rc = platform_driver_register(&unittest_pci_driver); | |
| if (unittest(!rc, "Failed to register unittest pci driver\n")) { | |
| pci_unregister_driver(&testdrv_driver); | |
| return; | |
| } | |
| while ((pdev = pci_get_device(PCI_VENDOR_ID_REDHAT, 0x5, pdev)) != NULL) { | |
| of_unittest_pci_node_verify(pdev, true); | |
| of_unittest_pci_dev_num++; | |
| } | |
| if (pdev) | |
| pci_dev_put(pdev); | |
| unittest(of_unittest_pci_dev_num, | |
| "No test PCI device been found. Please run QEMU with '-device pci-testdev'\n"); | |
| unittest(of_unittest_pci_dev_num == of_unittest_pci_child_num, | |
| "Child device number %d is not expected %d", of_unittest_pci_child_num, | |
| of_unittest_pci_dev_num); | |
| platform_driver_unregister(&unittest_pci_driver); | |
| pci_unregister_driver(&testdrv_driver); | |
| while ((pdev = pci_get_device(PCI_VENDOR_ID_REDHAT, 0x5, pdev)) != NULL) | |
| of_unittest_pci_node_verify(pdev, false); | |
| if (pdev) | |
| pci_dev_put(pdev); | |
| } | |
| #else | |
| static inline __init void of_unittest_overlay_high_level(void) {} | |
| static inline __init void of_unittest_pci_node(void) { } | |
| #endif | |
| static int __init of_unittest(void) | |
| { | |
| struct device_node *np; | |
| int res; | |
| pr_info("start of unittest - you will see error messages\n"); | |
| /* Taint the kernel so we know we've run tests. */ | |
| add_taint(TAINT_TEST, LOCKDEP_STILL_OK); | |
| /* adding data for unittest */ | |
| res = unittest_data_add(); | |
| if (res) | |
| return res; | |
| if (!of_aliases) | |
| of_aliases = of_find_node_by_path("/aliases"); | |
| np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); | |
| if (!np) { | |
| pr_info("No testcase data in device tree; not running tests\n"); | |
| return 0; | |
| } | |
| of_node_put(np); | |
| of_unittest_check_tree_linkage(); | |
| of_unittest_check_phandles(); | |
| of_unittest_find_node_by_name(); | |
| of_unittest_dynamic(); | |
| of_unittest_parse_phandle_with_args(); | |
| of_unittest_parse_phandle_with_args_map(); | |
| of_unittest_printf(); | |
| of_unittest_property_string(); | |
| of_unittest_property_copy(); | |
| of_unittest_changeset(); | |
| of_unittest_changeset_prop(); | |
| of_unittest_parse_interrupts(); | |
| of_unittest_parse_interrupts_extended(); | |
| of_unittest_parse_interrupt_map(); | |
| of_unittest_irq_refcount(); | |
| of_unittest_dma_get_max_cpu_address(); | |
| of_unittest_parse_dma_ranges(); | |
| of_unittest_pci_dma_ranges(); | |
| of_unittest_pci_empty_dma_ranges(); | |
| of_unittest_bus_ranges(); | |
| of_unittest_bus_3cell_ranges(); | |
| of_unittest_reg(); | |
| of_unittest_translate_addr(); | |
| of_unittest_match_node(); | |
| of_unittest_platform_populate(); | |
| of_unittest_overlay(); | |
| of_unittest_lifecycle(); | |
| of_unittest_pci_node(); | |
| /* Double check linkage after removing testcase data */ | |
| of_unittest_check_tree_linkage(); | |
| of_unittest_overlay_high_level(); | |
| pr_info("end of unittest - %i passed, %i failed\n", | |
| unittest_results.passed, unittest_results.failed); | |
| return 0; | |
| } | |
| late_initcall(of_unittest); |