| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Data Object Exchange | |
| * PCIe r6.0, sec 6.30 DOE | |
| * | |
| * Copyright (C) 2021 Huawei | |
| * Jonathan Cameron <Jonathan.Cameron@huawei.com> | |
| * | |
| * Copyright (C) 2022 Intel Corporation | |
| * Ira Weiny <ira.weiny@intel.com> | |
| */ | |
| #define dev_fmt(fmt) "DOE: " fmt | |
| #include <linux/bitfield.h> | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/mutex.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci-doe.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/workqueue.h> | |
| #include "pci.h" | |
| /* Timeout of 1 second from 6.30.2 Operation, PCI Spec r6.0 */ | |
| #define PCI_DOE_TIMEOUT HZ | |
| #define PCI_DOE_POLL_INTERVAL (PCI_DOE_TIMEOUT / 128) | |
| #define PCI_DOE_FLAG_CANCEL 0 | |
| #define PCI_DOE_FLAG_DEAD 1 | |
| /* Max data object length is 2^18 dwords */ | |
| #define PCI_DOE_MAX_LENGTH (1 << 18) | |
| /** | |
| * struct pci_doe_mb - State for a single DOE mailbox | |
| * | |
| * This state is used to manage a single DOE mailbox capability. All fields | |
| * should be considered opaque to the consumers and the structure passed into | |
| * the helpers below after being created by pci_doe_create_mb(). | |
| * | |
| * @pdev: PCI device this mailbox belongs to | |
| * @cap_offset: Capability offset | |
| * @feats: Array of features supported (encoded as long values) | |
| * @wq: Wait queue for work item | |
| * @work_queue: Queue of pci_doe_work items | |
| * @flags: Bit array of PCI_DOE_FLAG_* flags | |
| * @sysfs_attrs: Array of sysfs device attributes | |
| */ | |
| struct pci_doe_mb { | |
| struct pci_dev *pdev; | |
| u16 cap_offset; | |
| struct xarray feats; | |
| wait_queue_head_t wq; | |
| struct workqueue_struct *work_queue; | |
| unsigned long flags; | |
| #ifdef CONFIG_SYSFS | |
| struct device_attribute *sysfs_attrs; | |
| #endif | |
| }; | |
| struct pci_doe_feature { | |
| u16 vid; | |
| u8 type; | |
| }; | |
| /** | |
| * struct pci_doe_task - represents a single query/response | |
| * | |
| * @feat: DOE Feature | |
| * @request_pl: The request payload | |
| * @request_pl_sz: Size of the request payload (bytes) | |
| * @response_pl: The response payload | |
| * @response_pl_sz: Size of the response payload (bytes) | |
| * @rv: Return value. Length of received response or error (bytes) | |
| * @complete: Called when task is complete | |
| * @private: Private data for the consumer | |
| * @work: Used internally by the mailbox | |
| * @doe_mb: Used internally by the mailbox | |
| */ | |
| struct pci_doe_task { | |
| struct pci_doe_feature feat; | |
| const __le32 *request_pl; | |
| size_t request_pl_sz; | |
| __le32 *response_pl; | |
| size_t response_pl_sz; | |
| int rv; | |
| void (*complete)(struct pci_doe_task *task); | |
| void *private; | |
| /* initialized by pci_doe_submit_task() */ | |
| struct work_struct work; | |
| struct pci_doe_mb *doe_mb; | |
| }; | |
| #ifdef CONFIG_SYSFS | |
| static ssize_t doe_discovery_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sysfs_emit(buf, "0001:00\n"); | |
| } | |
| static DEVICE_ATTR_RO(doe_discovery); | |
| static struct attribute *pci_doe_sysfs_feature_attrs[] = { | |
| &dev_attr_doe_discovery.attr, | |
| NULL | |
| }; | |
| static bool pci_doe_features_sysfs_group_visible(struct kobject *kobj) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj)); | |
| return !xa_empty(&pdev->doe_mbs); | |
| } | |
| DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(pci_doe_features_sysfs) | |
| const struct attribute_group pci_doe_sysfs_group = { | |
| .name = "doe_features", | |
| .attrs = pci_doe_sysfs_feature_attrs, | |
| .is_visible = SYSFS_GROUP_VISIBLE(pci_doe_features_sysfs), | |
| }; | |
| static ssize_t pci_doe_sysfs_feature_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sysfs_emit(buf, "%s\n", attr->attr.name); | |
| } | |
| static void pci_doe_sysfs_feature_remove(struct pci_dev *pdev, | |
| struct pci_doe_mb *doe_mb) | |
| { | |
| struct device_attribute *attrs = doe_mb->sysfs_attrs; | |
| struct device *dev = &pdev->dev; | |
| unsigned long i; | |
| void *entry; | |
| if (!attrs) | |
| return; | |
| doe_mb->sysfs_attrs = NULL; | |
| xa_for_each(&doe_mb->feats, i, entry) { | |
| if (attrs[i].show) | |
| sysfs_remove_file_from_group(&dev->kobj, &attrs[i].attr, | |
| pci_doe_sysfs_group.name); | |
| kfree(attrs[i].attr.name); | |
| } | |
| kfree(attrs); | |
| } | |
| static int pci_doe_sysfs_feature_populate(struct pci_dev *pdev, | |
| struct pci_doe_mb *doe_mb) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_attribute *attrs; | |
| unsigned long num_features = 0; | |
| unsigned long vid, type; | |
| unsigned long i; | |
| void *entry; | |
| int ret; | |
| xa_for_each(&doe_mb->feats, i, entry) | |
| num_features++; | |
| attrs = kzalloc_objs(*attrs, num_features); | |
| if (!attrs) { | |
| pci_warn(pdev, "Failed allocating the device_attribute array\n"); | |
| return -ENOMEM; | |
| } | |
| doe_mb->sysfs_attrs = attrs; | |
| xa_for_each(&doe_mb->feats, i, entry) { | |
| sysfs_attr_init(&attrs[i].attr); | |
| vid = xa_to_value(entry) >> 8; | |
| type = xa_to_value(entry) & 0xFF; | |
| if (vid == PCI_VENDOR_ID_PCI_SIG && | |
| type == PCI_DOE_FEATURE_DISCOVERY) { | |
| /* | |
| * DOE Discovery, manually displayed by | |
| * `dev_attr_doe_discovery` | |
| */ | |
| continue; | |
| } | |
| attrs[i].attr.name = kasprintf(GFP_KERNEL, | |
| "%04lx:%02lx", vid, type); | |
| if (!attrs[i].attr.name) { | |
| ret = -ENOMEM; | |
| pci_warn(pdev, "Failed allocating the attribute name\n"); | |
| goto fail; | |
| } | |
| attrs[i].attr.mode = 0444; | |
| attrs[i].show = pci_doe_sysfs_feature_show; | |
| ret = sysfs_add_file_to_group(&dev->kobj, &attrs[i].attr, | |
| pci_doe_sysfs_group.name); | |
| if (ret) { | |
| attrs[i].show = NULL; | |
| if (ret != -EEXIST) { | |
| pci_warn(pdev, "Failed adding %s to sysfs group\n", | |
| attrs[i].attr.name); | |
| goto fail; | |
| } else | |
| kfree(attrs[i].attr.name); | |
| } | |
| } | |
| return 0; | |
| fail: | |
| pci_doe_sysfs_feature_remove(pdev, doe_mb); | |
| return ret; | |
| } | |
| void pci_doe_sysfs_teardown(struct pci_dev *pdev) | |
| { | |
| struct pci_doe_mb *doe_mb; | |
| unsigned long index; | |
| xa_for_each(&pdev->doe_mbs, index, doe_mb) | |
| pci_doe_sysfs_feature_remove(pdev, doe_mb); | |
| } | |
| void pci_doe_sysfs_init(struct pci_dev *pdev) | |
| { | |
| struct pci_doe_mb *doe_mb; | |
| unsigned long index; | |
| int ret; | |
| xa_for_each(&pdev->doe_mbs, index, doe_mb) { | |
| ret = pci_doe_sysfs_feature_populate(pdev, doe_mb); | |
| if (ret) | |
| return; | |
| } | |
| } | |
| #endif | |
| static int pci_doe_wait(struct pci_doe_mb *doe_mb, unsigned long timeout) | |
| { | |
| if (wait_event_timeout(doe_mb->wq, | |
| test_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags), | |
| timeout)) | |
| return -EIO; | |
| return 0; | |
| } | |
| static void pci_doe_write_ctrl(struct pci_doe_mb *doe_mb, u32 val) | |
| { | |
| struct pci_dev *pdev = doe_mb->pdev; | |
| int offset = doe_mb->cap_offset; | |
| pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val); | |
| } | |
| static int pci_doe_abort(struct pci_doe_mb *doe_mb) | |
| { | |
| struct pci_dev *pdev = doe_mb->pdev; | |
| int offset = doe_mb->cap_offset; | |
| unsigned long timeout_jiffies; | |
| pci_dbg(pdev, "[%x] Issuing Abort\n", offset); | |
| timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; | |
| pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_ABORT); | |
| do { | |
| int rc; | |
| u32 val; | |
| rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); | |
| if (rc) | |
| return rc; | |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); | |
| /* Abort success! */ | |
| if (!FIELD_GET(PCI_DOE_STATUS_ERROR, val) && | |
| !FIELD_GET(PCI_DOE_STATUS_BUSY, val)) | |
| return 0; | |
| } while (!time_after(jiffies, timeout_jiffies)); | |
| /* Abort has timed out and the MB is dead */ | |
| pci_err(pdev, "[%x] ABORT timed out\n", offset); | |
| return -EIO; | |
| } | |
| static int pci_doe_send_req(struct pci_doe_mb *doe_mb, | |
| struct pci_doe_task *task) | |
| { | |
| struct pci_dev *pdev = doe_mb->pdev; | |
| int offset = doe_mb->cap_offset; | |
| unsigned long timeout_jiffies; | |
| size_t length, remainder; | |
| u32 val; | |
| int i; | |
| /* | |
| * Check the DOE busy bit is not set. If it is set, this could indicate | |
| * someone other than Linux (e.g. firmware) is using the mailbox. Note | |
| * it is expected that firmware and OS will negotiate access rights via | |
| * an, as yet to be defined, method. | |
| * | |
| * Wait up to one PCI_DOE_TIMEOUT period to allow the prior command to | |
| * finish. Otherwise, simply error out as unable to field the request. | |
| * | |
| * PCIe r6.2 sec 6.30.3 states no interrupt is raised when the DOE Busy | |
| * bit is cleared, so polling here is our best option for the moment. | |
| */ | |
| timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; | |
| do { | |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); | |
| } while (FIELD_GET(PCI_DOE_STATUS_BUSY, val) && | |
| !time_after(jiffies, timeout_jiffies)); | |
| if (FIELD_GET(PCI_DOE_STATUS_BUSY, val)) | |
| return -EBUSY; | |
| if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) | |
| return -EIO; | |
| /* Length is 2 DW of header + length of payload in DW */ | |
| length = 2 + DIV_ROUND_UP(task->request_pl_sz, sizeof(__le32)); | |
| if (length > PCI_DOE_MAX_LENGTH) | |
| return -EIO; | |
| if (length == PCI_DOE_MAX_LENGTH) | |
| length = 0; | |
| /* Write DOE Header */ | |
| val = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, task->feat.vid) | | |
| FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, task->feat.type); | |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val); | |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, | |
| FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, | |
| length)); | |
| /* Write payload */ | |
| for (i = 0; i < task->request_pl_sz / sizeof(__le32); i++) | |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, | |
| le32_to_cpu(task->request_pl[i])); | |
| /* Write last payload dword */ | |
| remainder = task->request_pl_sz % sizeof(__le32); | |
| if (remainder) { | |
| val = 0; | |
| memcpy(&val, &task->request_pl[i], remainder); | |
| le32_to_cpus(&val); | |
| pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val); | |
| } | |
| pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_GO); | |
| return 0; | |
| } | |
| static bool pci_doe_data_obj_ready(struct pci_doe_mb *doe_mb) | |
| { | |
| struct pci_dev *pdev = doe_mb->pdev; | |
| int offset = doe_mb->cap_offset; | |
| u32 val; | |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); | |
| if (FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) | |
| return true; | |
| return false; | |
| } | |
| static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task) | |
| { | |
| size_t length, payload_length, remainder, received; | |
| struct pci_dev *pdev = doe_mb->pdev; | |
| int offset = doe_mb->cap_offset; | |
| int i = 0; | |
| u32 val; | |
| /* Read the first dword to get the feature */ | |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); | |
| if ((FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val) != task->feat.vid) || | |
| (FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val) != task->feat.type)) { | |
| dev_err_ratelimited(&pdev->dev, "[%x] expected [VID, Feature] = [%04x, %02x], got [%04x, %02x]\n", | |
| doe_mb->cap_offset, task->feat.vid, task->feat.type, | |
| FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val), | |
| FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val)); | |
| return -EIO; | |
| } | |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); | |
| /* Read the second dword to get the length */ | |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); | |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); | |
| length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, val); | |
| /* A value of 0x0 indicates max data object length */ | |
| if (!length) | |
| length = PCI_DOE_MAX_LENGTH; | |
| if (length < 2) | |
| return -EIO; | |
| /* First 2 dwords have already been read */ | |
| length -= 2; | |
| received = task->response_pl_sz; | |
| payload_length = DIV_ROUND_UP(task->response_pl_sz, sizeof(__le32)); | |
| remainder = task->response_pl_sz % sizeof(__le32); | |
| /* remainder signifies number of data bytes in last payload dword */ | |
| if (!remainder) | |
| remainder = sizeof(__le32); | |
| if (length < payload_length) { | |
| received = length * sizeof(__le32); | |
| payload_length = length; | |
| remainder = sizeof(__le32); | |
| } | |
| if (payload_length) { | |
| /* Read all payload dwords except the last */ | |
| for (; i < payload_length - 1; i++) { | |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, | |
| &val); | |
| task->response_pl[i] = cpu_to_le32(val); | |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); | |
| } | |
| /* Read last payload dword */ | |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); | |
| cpu_to_le32s(&val); | |
| memcpy(&task->response_pl[i], &val, remainder); | |
| /* Prior to the last ack, ensure Data Object Ready */ | |
| if (!pci_doe_data_obj_ready(doe_mb)) | |
| return -EIO; | |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); | |
| i++; | |
| } | |
| /* Flush excess length */ | |
| for (; i < length; i++) { | |
| pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); | |
| pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); | |
| } | |
| /* Final error check to pick up on any since Data Object Ready */ | |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); | |
| if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) | |
| return -EIO; | |
| return received; | |
| } | |
| static void signal_task_complete(struct pci_doe_task *task, int rv) | |
| { | |
| task->rv = rv; | |
| destroy_work_on_stack(&task->work); | |
| task->complete(task); | |
| } | |
| static void signal_task_abort(struct pci_doe_task *task, int rv) | |
| { | |
| struct pci_doe_mb *doe_mb = task->doe_mb; | |
| struct pci_dev *pdev = doe_mb->pdev; | |
| if (pci_doe_abort(doe_mb)) { | |
| /* | |
| * If the device can't process an abort; set the mailbox dead | |
| * - no more submissions | |
| */ | |
| pci_err(pdev, "[%x] Abort failed marking mailbox dead\n", | |
| doe_mb->cap_offset); | |
| set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); | |
| } | |
| signal_task_complete(task, rv); | |
| } | |
| static void doe_statemachine_work(struct work_struct *work) | |
| { | |
| struct pci_doe_task *task = container_of(work, struct pci_doe_task, | |
| work); | |
| struct pci_doe_mb *doe_mb = task->doe_mb; | |
| struct pci_dev *pdev = doe_mb->pdev; | |
| int offset = doe_mb->cap_offset; | |
| unsigned long timeout_jiffies; | |
| u32 val; | |
| int rc; | |
| if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) { | |
| signal_task_complete(task, -EIO); | |
| return; | |
| } | |
| /* Send request */ | |
| rc = pci_doe_send_req(doe_mb, task); | |
| if (rc) { | |
| /* | |
| * The specification does not provide any guidance on how to | |
| * resolve conflicting requests from other entities. | |
| * Furthermore, it is likely that busy will not be detected | |
| * most of the time. Flag any detection of status busy with an | |
| * error. | |
| */ | |
| if (rc == -EBUSY) | |
| dev_err_ratelimited(&pdev->dev, "[%x] busy detected; another entity is sending conflicting requests\n", | |
| offset); | |
| signal_task_abort(task, rc); | |
| return; | |
| } | |
| timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; | |
| /* Poll for response */ | |
| retry_resp: | |
| pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); | |
| if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) { | |
| signal_task_abort(task, -EIO); | |
| return; | |
| } | |
| if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) { | |
| if (time_after(jiffies, timeout_jiffies)) { | |
| signal_task_abort(task, -EIO); | |
| return; | |
| } | |
| rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); | |
| if (rc) { | |
| signal_task_abort(task, rc); | |
| return; | |
| } | |
| goto retry_resp; | |
| } | |
| rc = pci_doe_recv_resp(doe_mb, task); | |
| if (rc < 0) { | |
| signal_task_abort(task, rc); | |
| return; | |
| } | |
| signal_task_complete(task, rc); | |
| } | |
| static void pci_doe_task_complete(struct pci_doe_task *task) | |
| { | |
| complete(task->private); | |
| } | |
| static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 capver, u8 *index, u16 *vid, | |
| u8 *feature) | |
| { | |
| u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX, | |
| *index) | | |
| FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_VER, | |
| (capver >= 2) ? 2 : 0); | |
| __le32 request_pl_le = cpu_to_le32(request_pl); | |
| __le32 response_pl_le; | |
| u32 response_pl; | |
| int rc; | |
| rc = pci_doe(doe_mb, PCI_VENDOR_ID_PCI_SIG, PCI_DOE_FEATURE_DISCOVERY, | |
| &request_pl_le, sizeof(request_pl_le), | |
| &response_pl_le, sizeof(response_pl_le)); | |
| if (rc < 0) | |
| return rc; | |
| if (rc != sizeof(response_pl_le)) | |
| return -EIO; | |
| response_pl = le32_to_cpu(response_pl_le); | |
| *vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl); | |
| *feature = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_TYPE, | |
| response_pl); | |
| *index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX, | |
| response_pl); | |
| return 0; | |
| } | |
| static void *pci_doe_xa_feat_entry(u16 vid, u8 type) | |
| { | |
| return xa_mk_value((vid << 8) | type); | |
| } | |
| static int pci_doe_cache_features(struct pci_doe_mb *doe_mb) | |
| { | |
| u8 index = 0; | |
| u8 xa_idx = 0; | |
| u32 hdr = 0; | |
| pci_read_config_dword(doe_mb->pdev, doe_mb->cap_offset, &hdr); | |
| do { | |
| int rc; | |
| u16 vid; | |
| u8 type; | |
| rc = pci_doe_discovery(doe_mb, PCI_EXT_CAP_VER(hdr), &index, | |
| &vid, &type); | |
| if (rc) | |
| return rc; | |
| pci_dbg(doe_mb->pdev, | |
| "[%x] Found feature %d vid: %x type: %x\n", | |
| doe_mb->cap_offset, xa_idx, vid, type); | |
| rc = xa_insert(&doe_mb->feats, xa_idx++, | |
| pci_doe_xa_feat_entry(vid, type), GFP_KERNEL); | |
| if (rc) | |
| return rc; | |
| } while (index); | |
| return 0; | |
| } | |
| static void pci_doe_cancel_tasks(struct pci_doe_mb *doe_mb) | |
| { | |
| /* Stop all pending work items from starting */ | |
| set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); | |
| /* Cancel an in progress work item, if necessary */ | |
| set_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags); | |
| wake_up(&doe_mb->wq); | |
| } | |
| /** | |
| * pci_doe_create_mb() - Create a DOE mailbox object | |
| * | |
| * @pdev: PCI device to create the DOE mailbox for | |
| * @cap_offset: Offset of the DOE mailbox | |
| * | |
| * Create a single mailbox object to manage the mailbox feature at the | |
| * cap_offset specified. | |
| * | |
| * RETURNS: created mailbox object on success | |
| * ERR_PTR(-errno) on failure | |
| */ | |
| static struct pci_doe_mb *pci_doe_create_mb(struct pci_dev *pdev, | |
| u16 cap_offset) | |
| { | |
| struct pci_doe_mb *doe_mb; | |
| int rc; | |
| doe_mb = kzalloc_obj(*doe_mb); | |
| if (!doe_mb) | |
| return ERR_PTR(-ENOMEM); | |
| doe_mb->pdev = pdev; | |
| doe_mb->cap_offset = cap_offset; | |
| init_waitqueue_head(&doe_mb->wq); | |
| xa_init(&doe_mb->feats); | |
| doe_mb->work_queue = alloc_ordered_workqueue("%s %s DOE [%x]", 0, | |
| dev_bus_name(&pdev->dev), | |
| pci_name(pdev), | |
| doe_mb->cap_offset); | |
| if (!doe_mb->work_queue) { | |
| pci_err(pdev, "[%x] failed to allocate work queue\n", | |
| doe_mb->cap_offset); | |
| rc = -ENOMEM; | |
| goto err_free; | |
| } | |
| /* Reset the mailbox by issuing an abort */ | |
| rc = pci_doe_abort(doe_mb); | |
| if (rc) { | |
| pci_err(pdev, "[%x] failed to reset mailbox with abort command : %d\n", | |
| doe_mb->cap_offset, rc); | |
| goto err_destroy_wq; | |
| } | |
| /* | |
| * The state machine and the mailbox should be in sync now; | |
| * Use the mailbox to query features. | |
| */ | |
| rc = pci_doe_cache_features(doe_mb); | |
| if (rc) { | |
| pci_err(pdev, "[%x] failed to cache features : %d\n", | |
| doe_mb->cap_offset, rc); | |
| goto err_cancel; | |
| } | |
| return doe_mb; | |
| err_cancel: | |
| pci_doe_cancel_tasks(doe_mb); | |
| xa_destroy(&doe_mb->feats); | |
| err_destroy_wq: | |
| destroy_workqueue(doe_mb->work_queue); | |
| err_free: | |
| kfree(doe_mb); | |
| return ERR_PTR(rc); | |
| } | |
| /** | |
| * pci_doe_destroy_mb() - Destroy a DOE mailbox object | |
| * | |
| * @doe_mb: DOE mailbox | |
| * | |
| * Destroy all internal data structures created for the DOE mailbox. | |
| */ | |
| static void pci_doe_destroy_mb(struct pci_doe_mb *doe_mb) | |
| { | |
| pci_doe_cancel_tasks(doe_mb); | |
| xa_destroy(&doe_mb->feats); | |
| destroy_workqueue(doe_mb->work_queue); | |
| kfree(doe_mb); | |
| } | |
| /** | |
| * pci_doe_supports_feat() - Return if the DOE instance supports the given | |
| * feature | |
| * @doe_mb: DOE mailbox capability to query | |
| * @vid: Feature Vendor ID | |
| * @type: Feature type | |
| * | |
| * RETURNS: True if the DOE mailbox supports the feature specified | |
| */ | |
| static bool pci_doe_supports_feat(struct pci_doe_mb *doe_mb, u16 vid, u8 type) | |
| { | |
| unsigned long index; | |
| void *entry; | |
| /* The discovery feature must always be supported */ | |
| if (vid == PCI_VENDOR_ID_PCI_SIG && type == PCI_DOE_FEATURE_DISCOVERY) | |
| return true; | |
| xa_for_each(&doe_mb->feats, index, entry) | |
| if (entry == pci_doe_xa_feat_entry(vid, type)) | |
| return true; | |
| return false; | |
| } | |
| /** | |
| * pci_doe_submit_task() - Submit a task to be processed by the state machine | |
| * | |
| * @doe_mb: DOE mailbox capability to submit to | |
| * @task: task to be queued | |
| * | |
| * Submit a DOE task (request/response) to the DOE mailbox to be processed. | |
| * Returns upon queueing the task object. If the queue is full this function | |
| * will sleep until there is room in the queue. | |
| * | |
| * task->complete will be called when the state machine is done processing this | |
| * task. | |
| * | |
| * @task must be allocated on the stack. | |
| * | |
| * Excess data will be discarded. | |
| * | |
| * RETURNS: 0 when task has been successfully queued, -ERRNO on error | |
| */ | |
| static int pci_doe_submit_task(struct pci_doe_mb *doe_mb, | |
| struct pci_doe_task *task) | |
| { | |
| if (!pci_doe_supports_feat(doe_mb, task->feat.vid, task->feat.type)) | |
| return -EINVAL; | |
| if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) | |
| return -EIO; | |
| task->doe_mb = doe_mb; | |
| INIT_WORK_ONSTACK(&task->work, doe_statemachine_work); | |
| queue_work(doe_mb->work_queue, &task->work); | |
| return 0; | |
| } | |
| /** | |
| * pci_doe() - Perform Data Object Exchange | |
| * | |
| * @doe_mb: DOE Mailbox | |
| * @vendor: Vendor ID | |
| * @type: Data Object Type | |
| * @request: Request payload | |
| * @request_sz: Size of request payload (bytes) | |
| * @response: Response payload | |
| * @response_sz: Size of response payload (bytes) | |
| * | |
| * Submit @request to @doe_mb and store the @response. | |
| * The DOE exchange is performed synchronously and may therefore sleep. | |
| * | |
| * Payloads are treated as opaque byte streams which are transmitted verbatim, | |
| * without byte-swapping. If payloads contain little-endian register values, | |
| * the caller is responsible for conversion with cpu_to_le32() / le32_to_cpu(). | |
| * | |
| * For convenience, arbitrary payload sizes are allowed even though PCIe r6.0 | |
| * sec 6.30.1 specifies the Data Object Header 2 "Length" in dwords. The last | |
| * (partial) dword is copied with byte granularity and padded with zeroes if | |
| * necessary. Callers are thus relieved of using dword-sized bounce buffers. | |
| * | |
| * RETURNS: Length of received response or negative errno. | |
| * Received data in excess of @response_sz is discarded. | |
| * The length may be smaller than @response_sz and the caller | |
| * is responsible for checking that. | |
| */ | |
| int pci_doe(struct pci_doe_mb *doe_mb, u16 vendor, u8 type, | |
| const void *request, size_t request_sz, | |
| void *response, size_t response_sz) | |
| { | |
| DECLARE_COMPLETION_ONSTACK(c); | |
| struct pci_doe_task task = { | |
| .feat.vid = vendor, | |
| .feat.type = type, | |
| .request_pl = request, | |
| .request_pl_sz = request_sz, | |
| .response_pl = response, | |
| .response_pl_sz = response_sz, | |
| .complete = pci_doe_task_complete, | |
| .private = &c, | |
| }; | |
| int rc; | |
| rc = pci_doe_submit_task(doe_mb, &task); | |
| if (rc) | |
| return rc; | |
| wait_for_completion(&c); | |
| return task.rv; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_doe); | |
| /** | |
| * pci_find_doe_mailbox() - Find Data Object Exchange mailbox | |
| * | |
| * @pdev: PCI device | |
| * @vendor: Vendor ID | |
| * @type: Data Object Type | |
| * | |
| * Find first DOE mailbox of a PCI device which supports the given feature. | |
| * | |
| * RETURNS: Pointer to the DOE mailbox or NULL if none was found. | |
| */ | |
| struct pci_doe_mb *pci_find_doe_mailbox(struct pci_dev *pdev, u16 vendor, | |
| u8 type) | |
| { | |
| struct pci_doe_mb *doe_mb; | |
| unsigned long index; | |
| xa_for_each(&pdev->doe_mbs, index, doe_mb) | |
| if (pci_doe_supports_feat(doe_mb, vendor, type)) | |
| return doe_mb; | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_find_doe_mailbox); | |
| void pci_doe_init(struct pci_dev *pdev) | |
| { | |
| struct pci_doe_mb *doe_mb; | |
| u16 offset = 0; | |
| int rc; | |
| xa_init(&pdev->doe_mbs); | |
| while ((offset = pci_find_next_ext_capability(pdev, offset, | |
| PCI_EXT_CAP_ID_DOE))) { | |
| doe_mb = pci_doe_create_mb(pdev, offset); | |
| if (IS_ERR(doe_mb)) { | |
| pci_err(pdev, "[%x] failed to create mailbox: %ld\n", | |
| offset, PTR_ERR(doe_mb)); | |
| continue; | |
| } | |
| rc = xa_insert(&pdev->doe_mbs, offset, doe_mb, GFP_KERNEL); | |
| if (rc) { | |
| pci_err(pdev, "[%x] failed to insert mailbox: %d\n", | |
| offset, rc); | |
| pci_doe_destroy_mb(doe_mb); | |
| } | |
| } | |
| } | |
| void pci_doe_destroy(struct pci_dev *pdev) | |
| { | |
| struct pci_doe_mb *doe_mb; | |
| unsigned long index; | |
| xa_for_each(&pdev->doe_mbs, index, doe_mb) | |
| pci_doe_destroy_mb(doe_mb); | |
| xa_destroy(&pdev->doe_mbs); | |
| } | |
| void pci_doe_disconnected(struct pci_dev *pdev) | |
| { | |
| struct pci_doe_mb *doe_mb; | |
| unsigned long index; | |
| xa_for_each(&pdev->doe_mbs, index, doe_mb) | |
| pci_doe_cancel_tasks(doe_mb); | |
| } |