| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * PCI Express I/O Virtualization (IOV) support | |
| * Single Root IOV 1.0 | |
| * Address Translation Service 1.0 | |
| * | |
| * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com> | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/bits.h> | |
| #include <linux/log2.h> | |
| #include <linux/pci.h> | |
| #include <linux/sizes.h> | |
| #include <linux/slab.h> | |
| #include <linux/export.h> | |
| #include <linux/string.h> | |
| #include <linux/delay.h> | |
| #include <asm/div64.h> | |
| #include "pci.h" | |
| #define VIRTFN_ID_LEN 17 /* "virtfn%u\0" for 2^32 - 1 */ | |
| int pci_iov_virtfn_bus(struct pci_dev *dev, int vf_id) | |
| { | |
| if (!dev->is_physfn) | |
| return -EINVAL; | |
| return dev->bus->number + ((dev->devfn + dev->sriov->offset + | |
| dev->sriov->stride * vf_id) >> 8); | |
| } | |
| int pci_iov_virtfn_devfn(struct pci_dev *dev, int vf_id) | |
| { | |
| if (!dev->is_physfn) | |
| return -EINVAL; | |
| return (dev->devfn + dev->sriov->offset + | |
| dev->sriov->stride * vf_id) & 0xff; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_iov_virtfn_devfn); | |
| int pci_iov_vf_id(struct pci_dev *dev) | |
| { | |
| struct pci_dev *pf; | |
| if (!dev->is_virtfn) | |
| return -EINVAL; | |
| pf = pci_physfn(dev); | |
| return (pci_dev_id(dev) - (pci_dev_id(pf) + pf->sriov->offset)) / | |
| pf->sriov->stride; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_iov_vf_id); | |
| /** | |
| * pci_iov_get_pf_drvdata - Return the drvdata of a PF | |
| * @dev: VF pci_dev | |
| * @pf_driver: Device driver required to own the PF | |
| * | |
| * This must be called from a context that ensures that a VF driver is attached. | |
| * The value returned is invalid once the VF driver completes its remove() | |
| * callback. | |
| * | |
| * Locking is achieved by the driver core. A VF driver cannot be probed until | |
| * pci_enable_sriov() is called and pci_disable_sriov() does not return until | |
| * all VF drivers have completed their remove(). | |
| * | |
| * The PF driver must call pci_disable_sriov() before it begins to destroy the | |
| * drvdata. | |
| */ | |
| void *pci_iov_get_pf_drvdata(struct pci_dev *dev, struct pci_driver *pf_driver) | |
| { | |
| struct pci_dev *pf_dev; | |
| if (!dev->is_virtfn) | |
| return ERR_PTR(-EINVAL); | |
| pf_dev = dev->physfn; | |
| if (pf_dev->driver != pf_driver) | |
| return ERR_PTR(-EINVAL); | |
| return pci_get_drvdata(pf_dev); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_iov_get_pf_drvdata); | |
| /* | |
| * Per SR-IOV spec sec 3.3.10 and 3.3.11, First VF Offset and VF Stride may | |
| * change when NumVFs changes. | |
| * | |
| * Update iov->offset and iov->stride when NumVFs is written. | |
| */ | |
| static inline void pci_iov_set_numvfs(struct pci_dev *dev, int nr_virtfn) | |
| { | |
| struct pci_sriov *iov = dev->sriov; | |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn); | |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_OFFSET, &iov->offset); | |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_STRIDE, &iov->stride); | |
| } | |
| /* | |
| * The PF consumes one bus number. NumVFs, First VF Offset, and VF Stride | |
| * determine how many additional bus numbers will be consumed by VFs. | |
| * | |
| * Iterate over all valid NumVFs, validate offset and stride, and calculate | |
| * the maximum number of bus numbers that could ever be required. | |
| */ | |
| static int compute_max_vf_buses(struct pci_dev *dev) | |
| { | |
| struct pci_sriov *iov = dev->sriov; | |
| int nr_virtfn, busnr, rc = 0; | |
| for (nr_virtfn = iov->total_VFs; nr_virtfn; nr_virtfn--) { | |
| pci_iov_set_numvfs(dev, nr_virtfn); | |
| if (!iov->offset || (nr_virtfn > 1 && !iov->stride)) { | |
| rc = -EIO; | |
| goto out; | |
| } | |
| busnr = pci_iov_virtfn_bus(dev, nr_virtfn - 1); | |
| if (busnr > iov->max_VF_buses) | |
| iov->max_VF_buses = busnr; | |
| } | |
| out: | |
| pci_iov_set_numvfs(dev, 0); | |
| return rc; | |
| } | |
| static struct pci_bus *virtfn_add_bus(struct pci_bus *bus, int busnr) | |
| { | |
| struct pci_bus *child; | |
| if (bus->number == busnr) | |
| return bus; | |
| child = pci_find_bus(pci_domain_nr(bus), busnr); | |
| if (child) | |
| return child; | |
| child = pci_add_new_bus(bus, NULL, busnr); | |
| if (!child) | |
| return NULL; | |
| pci_bus_insert_busn_res(child, busnr, busnr); | |
| return child; | |
| } | |
| static void virtfn_remove_bus(struct pci_bus *physbus, struct pci_bus *virtbus) | |
| { | |
| if (physbus != virtbus && list_empty(&virtbus->devices)) | |
| pci_remove_bus(virtbus); | |
| } | |
| resource_size_t pci_iov_resource_size(const struct pci_dev *dev, int resno) | |
| { | |
| if (!dev->is_physfn) | |
| return 0; | |
| return dev->sriov->barsz[pci_resource_num_to_vf_bar(resno)]; | |
| } | |
| void pci_iov_resource_set_size(struct pci_dev *dev, int resno, int size) | |
| { | |
| if (!pci_resource_is_iov(resno)) { | |
| pci_warn(dev, "%s is not an IOV resource\n", | |
| pci_resource_name(dev, resno)); | |
| return; | |
| } | |
| resno = pci_resource_num_to_vf_bar(resno); | |
| dev->sriov->barsz[resno] = pci_rebar_size_to_bytes(size); | |
| } | |
| bool pci_iov_is_memory_decoding_enabled(struct pci_dev *dev) | |
| { | |
| u16 cmd; | |
| pci_read_config_word(dev, dev->sriov->pos + PCI_SRIOV_CTRL, &cmd); | |
| return cmd & PCI_SRIOV_CTRL_MSE; | |
| } | |
| static void pci_read_vf_config_common(struct pci_dev *virtfn) | |
| { | |
| struct pci_dev *physfn = virtfn->physfn; | |
| /* | |
| * Some config registers are the same across all associated VFs. | |
| * Read them once from VF0 so we can skip reading them from the | |
| * other VFs. | |
| * | |
| * PCIe r4.0, sec 9.3.4.1, technically doesn't require all VFs to | |
| * have the same Revision ID and Subsystem ID, but we assume they | |
| * do. | |
| */ | |
| pci_read_config_dword(virtfn, PCI_CLASS_REVISION, | |
| &physfn->sriov->class); | |
| pci_read_config_byte(virtfn, PCI_HEADER_TYPE, | |
| &physfn->sriov->hdr_type); | |
| pci_read_config_word(virtfn, PCI_SUBSYSTEM_VENDOR_ID, | |
| &physfn->sriov->subsystem_vendor); | |
| pci_read_config_word(virtfn, PCI_SUBSYSTEM_ID, | |
| &physfn->sriov->subsystem_device); | |
| } | |
| int pci_iov_sysfs_link(struct pci_dev *dev, | |
| struct pci_dev *virtfn, int id) | |
| { | |
| char buf[VIRTFN_ID_LEN]; | |
| int rc; | |
| sprintf(buf, "virtfn%u", id); | |
| rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf); | |
| if (rc) | |
| goto failed; | |
| rc = sysfs_create_link(&virtfn->dev.kobj, &dev->dev.kobj, "physfn"); | |
| if (rc) | |
| goto failed1; | |
| kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE); | |
| return 0; | |
| failed1: | |
| sysfs_remove_link(&dev->dev.kobj, buf); | |
| failed: | |
| return rc; | |
| } | |
| #ifdef CONFIG_PCI_MSI | |
| static ssize_t sriov_vf_total_msix_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| u32 vf_total_msix = 0; | |
| device_lock(dev); | |
| if (!pdev->driver || !pdev->driver->sriov_get_vf_total_msix) | |
| goto unlock; | |
| vf_total_msix = pdev->driver->sriov_get_vf_total_msix(pdev); | |
| unlock: | |
| device_unlock(dev); | |
| return sysfs_emit(buf, "%u\n", vf_total_msix); | |
| } | |
| static DEVICE_ATTR_RO(sriov_vf_total_msix); | |
| static ssize_t sriov_vf_msix_count_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct pci_dev *vf_dev = to_pci_dev(dev); | |
| struct pci_dev *pdev = pci_physfn(vf_dev); | |
| int val, ret = 0; | |
| if (kstrtoint(buf, 0, &val) < 0) | |
| return -EINVAL; | |
| if (val < 0) | |
| return -EINVAL; | |
| device_lock(&pdev->dev); | |
| if (!pdev->driver || !pdev->driver->sriov_set_msix_vec_count) { | |
| ret = -EOPNOTSUPP; | |
| goto err_pdev; | |
| } | |
| device_lock(&vf_dev->dev); | |
| if (vf_dev->driver) { | |
| /* | |
| * A driver is already attached to this VF and has configured | |
| * itself based on the current MSI-X vector count. Changing | |
| * the vector size could mess up the driver, so block it. | |
| */ | |
| ret = -EBUSY; | |
| goto err_dev; | |
| } | |
| ret = pdev->driver->sriov_set_msix_vec_count(vf_dev, val); | |
| err_dev: | |
| device_unlock(&vf_dev->dev); | |
| err_pdev: | |
| device_unlock(&pdev->dev); | |
| return ret ? : count; | |
| } | |
| static DEVICE_ATTR_WO(sriov_vf_msix_count); | |
| #endif | |
| static struct attribute *sriov_vf_dev_attrs[] = { | |
| #ifdef CONFIG_PCI_MSI | |
| &dev_attr_sriov_vf_msix_count.attr, | |
| #endif | |
| NULL, | |
| }; | |
| static umode_t sriov_vf_attrs_are_visible(struct kobject *kobj, | |
| struct attribute *a, int n) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| if (!pdev->is_virtfn) | |
| return 0; | |
| return a->mode; | |
| } | |
| const struct attribute_group sriov_vf_dev_attr_group = { | |
| .attrs = sriov_vf_dev_attrs, | |
| .is_visible = sriov_vf_attrs_are_visible, | |
| }; | |
| static struct pci_dev *pci_iov_scan_device(struct pci_dev *dev, int id, | |
| struct pci_bus *bus) | |
| { | |
| struct pci_sriov *iov = dev->sriov; | |
| struct pci_dev *virtfn; | |
| int rc; | |
| virtfn = pci_alloc_dev(bus); | |
| if (!virtfn) | |
| return ERR_PTR(-ENOMEM); | |
| virtfn->devfn = pci_iov_virtfn_devfn(dev, id); | |
| virtfn->vendor = dev->vendor; | |
| virtfn->device = iov->vf_device; | |
| virtfn->is_virtfn = 1; | |
| virtfn->physfn = pci_dev_get(dev); | |
| virtfn->no_command_memory = 1; | |
| if (id == 0) | |
| pci_read_vf_config_common(virtfn); | |
| rc = pci_setup_device(virtfn); | |
| if (rc) { | |
| pci_dev_put(dev); | |
| pci_bus_put(virtfn->bus); | |
| kfree(virtfn); | |
| return ERR_PTR(rc); | |
| } | |
| return virtfn; | |
| } | |
| int pci_iov_add_virtfn(struct pci_dev *dev, int id) | |
| { | |
| struct pci_bus *bus; | |
| struct pci_dev *virtfn; | |
| struct resource *res; | |
| int rc, i; | |
| u64 size; | |
| bus = virtfn_add_bus(dev->bus, pci_iov_virtfn_bus(dev, id)); | |
| if (!bus) { | |
| rc = -ENOMEM; | |
| goto failed; | |
| } | |
| virtfn = pci_iov_scan_device(dev, id, bus); | |
| if (IS_ERR(virtfn)) { | |
| rc = PTR_ERR(virtfn); | |
| goto failed0; | |
| } | |
| virtfn->dev.parent = dev->dev.parent; | |
| virtfn->multifunction = 0; | |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { | |
| int idx = pci_resource_num_from_vf_bar(i); | |
| res = &dev->resource[idx]; | |
| if (!res->parent) | |
| continue; | |
| virtfn->resource[i].name = pci_name(virtfn); | |
| virtfn->resource[i].flags = res->flags; | |
| size = pci_iov_resource_size(dev, idx); | |
| resource_set_range(&virtfn->resource[i], | |
| res->start + size * id, size); | |
| rc = request_resource(res, &virtfn->resource[i]); | |
| BUG_ON(rc); | |
| } | |
| pci_device_add(virtfn, virtfn->bus); | |
| rc = pci_iov_sysfs_link(dev, virtfn, id); | |
| if (rc) | |
| goto failed1; | |
| pci_bus_add_device(virtfn); | |
| return 0; | |
| failed1: | |
| pci_stop_and_remove_bus_device(virtfn); | |
| pci_dev_put(dev); | |
| failed0: | |
| virtfn_remove_bus(dev->bus, bus); | |
| failed: | |
| return rc; | |
| } | |
| void pci_iov_remove_virtfn(struct pci_dev *dev, int id) | |
| { | |
| char buf[VIRTFN_ID_LEN]; | |
| struct pci_dev *virtfn; | |
| virtfn = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus), | |
| pci_iov_virtfn_bus(dev, id), | |
| pci_iov_virtfn_devfn(dev, id)); | |
| if (!virtfn) | |
| return; | |
| sprintf(buf, "virtfn%u", id); | |
| sysfs_remove_link(&dev->dev.kobj, buf); | |
| /* | |
| * pci_stop_dev() could have been called for this virtfn already, | |
| * so the directory for the virtfn may have been removed before. | |
| * Double check to avoid spurious sysfs warnings. | |
| */ | |
| if (virtfn->dev.kobj.sd) | |
| sysfs_remove_link(&virtfn->dev.kobj, "physfn"); | |
| pci_stop_and_remove_bus_device(virtfn); | |
| virtfn_remove_bus(dev->bus, virtfn->bus); | |
| /* balance pci_get_domain_bus_and_slot() */ | |
| pci_dev_put(virtfn); | |
| pci_dev_put(dev); | |
| } | |
| static ssize_t sriov_totalvfs_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| return sysfs_emit(buf, "%u\n", pci_sriov_get_totalvfs(pdev)); | |
| } | |
| static ssize_t sriov_numvfs_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| u16 num_vfs; | |
| /* Serialize vs sriov_numvfs_store() so readers see valid num_VFs */ | |
| device_lock(&pdev->dev); | |
| num_vfs = pdev->sriov->num_VFs; | |
| device_unlock(&pdev->dev); | |
| return sysfs_emit(buf, "%u\n", num_vfs); | |
| } | |
| /* | |
| * num_vfs > 0; number of VFs to enable | |
| * num_vfs = 0; disable all VFs | |
| * | |
| * Note: SRIOV spec does not allow partial VF | |
| * disable, so it's all or none. | |
| */ | |
| static ssize_t sriov_numvfs_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| int ret = 0; | |
| u16 num_vfs; | |
| if (kstrtou16(buf, 0, &num_vfs) < 0) | |
| return -EINVAL; | |
| if (num_vfs > pci_sriov_get_totalvfs(pdev)) | |
| return -ERANGE; | |
| device_lock(&pdev->dev); | |
| if (num_vfs == pdev->sriov->num_VFs) | |
| goto exit; | |
| /* is PF driver loaded */ | |
| if (!pdev->driver) { | |
| pci_info(pdev, "no driver bound to device; cannot configure SR-IOV\n"); | |
| ret = -ENOENT; | |
| goto exit; | |
| } | |
| /* is PF driver loaded w/callback */ | |
| if (!pdev->driver->sriov_configure) { | |
| pci_info(pdev, "driver does not support SR-IOV configuration via sysfs\n"); | |
| ret = -ENOENT; | |
| goto exit; | |
| } | |
| if (num_vfs == 0) { | |
| /* disable VFs */ | |
| pci_lock_rescan_remove(); | |
| ret = pdev->driver->sriov_configure(pdev, 0); | |
| pci_unlock_rescan_remove(); | |
| goto exit; | |
| } | |
| /* enable VFs */ | |
| if (pdev->sriov->num_VFs) { | |
| pci_warn(pdev, "%d VFs already enabled. Disable before enabling %d VFs\n", | |
| pdev->sriov->num_VFs, num_vfs); | |
| ret = -EBUSY; | |
| goto exit; | |
| } | |
| pci_lock_rescan_remove(); | |
| ret = pdev->driver->sriov_configure(pdev, num_vfs); | |
| pci_unlock_rescan_remove(); | |
| if (ret < 0) | |
| goto exit; | |
| if (ret != num_vfs) | |
| pci_warn(pdev, "%d VFs requested; only %d enabled\n", | |
| num_vfs, ret); | |
| exit: | |
| device_unlock(&pdev->dev); | |
| if (ret < 0) | |
| return ret; | |
| return count; | |
| } | |
| static ssize_t sriov_offset_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| return sysfs_emit(buf, "%u\n", pdev->sriov->offset); | |
| } | |
| static ssize_t sriov_stride_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| return sysfs_emit(buf, "%u\n", pdev->sriov->stride); | |
| } | |
| static ssize_t sriov_vf_device_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| return sysfs_emit(buf, "%x\n", pdev->sriov->vf_device); | |
| } | |
| static ssize_t sriov_drivers_autoprobe_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| return sysfs_emit(buf, "%u\n", pdev->sriov->drivers_autoprobe); | |
| } | |
| static ssize_t sriov_drivers_autoprobe_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct pci_dev *pdev = to_pci_dev(dev); | |
| bool drivers_autoprobe; | |
| if (kstrtobool(buf, &drivers_autoprobe) < 0) | |
| return -EINVAL; | |
| pdev->sriov->drivers_autoprobe = drivers_autoprobe; | |
| return count; | |
| } | |
| static DEVICE_ATTR_RO(sriov_totalvfs); | |
| static DEVICE_ATTR_RW(sriov_numvfs); | |
| static DEVICE_ATTR_RO(sriov_offset); | |
| static DEVICE_ATTR_RO(sriov_stride); | |
| static DEVICE_ATTR_RO(sriov_vf_device); | |
| static DEVICE_ATTR_RW(sriov_drivers_autoprobe); | |
| static struct attribute *sriov_pf_dev_attrs[] = { | |
| &dev_attr_sriov_totalvfs.attr, | |
| &dev_attr_sriov_numvfs.attr, | |
| &dev_attr_sriov_offset.attr, | |
| &dev_attr_sriov_stride.attr, | |
| &dev_attr_sriov_vf_device.attr, | |
| &dev_attr_sriov_drivers_autoprobe.attr, | |
| #ifdef CONFIG_PCI_MSI | |
| &dev_attr_sriov_vf_total_msix.attr, | |
| #endif | |
| NULL, | |
| }; | |
| static umode_t sriov_pf_attrs_are_visible(struct kobject *kobj, | |
| struct attribute *a, int n) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| if (!dev_is_pf(dev)) | |
| return 0; | |
| return a->mode; | |
| } | |
| const struct attribute_group sriov_pf_dev_attr_group = { | |
| .attrs = sriov_pf_dev_attrs, | |
| .is_visible = sriov_pf_attrs_are_visible, | |
| }; | |
| int __weak pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs) | |
| { | |
| return 0; | |
| } | |
| int __weak pcibios_sriov_disable(struct pci_dev *pdev) | |
| { | |
| return 0; | |
| } | |
| static int sriov_add_vfs(struct pci_dev *dev, u16 num_vfs) | |
| { | |
| unsigned int i; | |
| int rc; | |
| if (dev->no_vf_scan) | |
| return 0; | |
| for (i = 0; i < num_vfs; i++) { | |
| rc = pci_iov_add_virtfn(dev, i); | |
| if (rc) | |
| goto failed; | |
| } | |
| return 0; | |
| failed: | |
| while (i--) | |
| pci_iov_remove_virtfn(dev, i); | |
| return rc; | |
| } | |
| static int sriov_enable(struct pci_dev *dev, int nr_virtfn) | |
| { | |
| int rc; | |
| int i; | |
| int nres; | |
| u16 initial; | |
| struct resource *res; | |
| struct pci_dev *pdev; | |
| struct pci_sriov *iov = dev->sriov; | |
| int bars = 0; | |
| int bus; | |
| if (!nr_virtfn) | |
| return 0; | |
| if (iov->num_VFs) | |
| return -EINVAL; | |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_INITIAL_VF, &initial); | |
| if (initial > iov->total_VFs || | |
| (!(iov->cap & PCI_SRIOV_CAP_VFM) && (initial != iov->total_VFs))) | |
| return -EIO; | |
| if (nr_virtfn < 0 || nr_virtfn > iov->total_VFs || | |
| (!(iov->cap & PCI_SRIOV_CAP_VFM) && (nr_virtfn > initial))) | |
| return -EINVAL; | |
| nres = 0; | |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { | |
| int idx = pci_resource_num_from_vf_bar(i); | |
| resource_size_t vf_bar_sz = pci_iov_resource_size(dev, idx); | |
| bars |= (1 << idx); | |
| res = &dev->resource[idx]; | |
| if (vf_bar_sz * nr_virtfn > resource_size(res)) | |
| continue; | |
| if (res->parent) | |
| nres++; | |
| } | |
| if (nres != iov->nres) { | |
| pci_err(dev, "not enough MMIO resources for SR-IOV\n"); | |
| return -ENOMEM; | |
| } | |
| bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1); | |
| if (bus > dev->bus->busn_res.end) { | |
| pci_err(dev, "can't enable %d VFs (bus %02x out of range of %pR)\n", | |
| nr_virtfn, bus, &dev->bus->busn_res); | |
| return -ENOMEM; | |
| } | |
| if (pci_enable_resources(dev, bars)) { | |
| pci_err(dev, "SR-IOV: IOV BARS not allocated\n"); | |
| return -ENOMEM; | |
| } | |
| if (iov->link != dev->devfn) { | |
| pdev = pci_get_slot(dev->bus, iov->link); | |
| if (!pdev) | |
| return -ENODEV; | |
| if (!pdev->is_physfn) { | |
| pci_dev_put(pdev); | |
| return -ENOSYS; | |
| } | |
| rc = sysfs_create_link(&dev->dev.kobj, | |
| &pdev->dev.kobj, "dep_link"); | |
| pci_dev_put(pdev); | |
| if (rc) | |
| return rc; | |
| } | |
| iov->initial_VFs = initial; | |
| if (nr_virtfn < initial) | |
| initial = nr_virtfn; | |
| rc = pcibios_sriov_enable(dev, initial); | |
| if (rc) { | |
| pci_err(dev, "failure %d from pcibios_sriov_enable()\n", rc); | |
| goto err_pcibios; | |
| } | |
| pci_iov_set_numvfs(dev, nr_virtfn); | |
| iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE; | |
| pci_cfg_access_lock(dev); | |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); | |
| msleep(100); | |
| pci_cfg_access_unlock(dev); | |
| rc = sriov_add_vfs(dev, initial); | |
| if (rc) | |
| goto err_pcibios; | |
| kobject_uevent(&dev->dev.kobj, KOBJ_CHANGE); | |
| iov->num_VFs = nr_virtfn; | |
| return 0; | |
| err_pcibios: | |
| iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); | |
| pci_cfg_access_lock(dev); | |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); | |
| ssleep(1); | |
| pci_cfg_access_unlock(dev); | |
| pcibios_sriov_disable(dev); | |
| if (iov->link != dev->devfn) | |
| sysfs_remove_link(&dev->dev.kobj, "dep_link"); | |
| pci_iov_set_numvfs(dev, 0); | |
| return rc; | |
| } | |
| static void sriov_del_vfs(struct pci_dev *dev) | |
| { | |
| struct pci_sriov *iov = dev->sriov; | |
| int i; | |
| for (i = 0; i < iov->num_VFs; i++) | |
| pci_iov_remove_virtfn(dev, i); | |
| } | |
| static void sriov_disable(struct pci_dev *dev) | |
| { | |
| struct pci_sriov *iov = dev->sriov; | |
| if (!iov->num_VFs) | |
| return; | |
| sriov_del_vfs(dev); | |
| iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); | |
| pci_cfg_access_lock(dev); | |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); | |
| ssleep(1); | |
| pci_cfg_access_unlock(dev); | |
| pcibios_sriov_disable(dev); | |
| if (iov->link != dev->devfn) | |
| sysfs_remove_link(&dev->dev.kobj, "dep_link"); | |
| iov->num_VFs = 0; | |
| pci_iov_set_numvfs(dev, 0); | |
| } | |
| static int sriov_init(struct pci_dev *dev, int pos) | |
| { | |
| int i, bar64; | |
| int rc; | |
| int nres; | |
| u32 pgsz; | |
| u16 ctrl, total; | |
| struct pci_sriov *iov; | |
| struct resource *res; | |
| const char *res_name; | |
| struct pci_dev *pdev; | |
| u32 sriovbars[PCI_SRIOV_NUM_BARS]; | |
| pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &ctrl); | |
| if (ctrl & PCI_SRIOV_CTRL_VFE) { | |
| pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, 0); | |
| ssleep(1); | |
| } | |
| ctrl = 0; | |
| list_for_each_entry(pdev, &dev->bus->devices, bus_list) | |
| if (pdev->is_physfn) | |
| goto found; | |
| pdev = NULL; | |
| if (pci_ari_enabled(dev->bus)) | |
| ctrl |= PCI_SRIOV_CTRL_ARI; | |
| found: | |
| pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl); | |
| pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &total); | |
| if (!total) | |
| return 0; | |
| pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &pgsz); | |
| i = PAGE_SHIFT > 12 ? PAGE_SHIFT - 12 : 0; | |
| pgsz &= ~((1 << i) - 1); | |
| if (!pgsz) | |
| return -EIO; | |
| pgsz &= ~(pgsz - 1); | |
| pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz); | |
| iov = kzalloc_obj(*iov); | |
| if (!iov) | |
| return -ENOMEM; | |
| /* Sizing SR-IOV BARs with VF Enable cleared - no decode */ | |
| __pci_size_stdbars(dev, PCI_SRIOV_NUM_BARS, | |
| pos + PCI_SRIOV_BAR, sriovbars); | |
| nres = 0; | |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { | |
| int idx = pci_resource_num_from_vf_bar(i); | |
| res = &dev->resource[idx]; | |
| res_name = pci_resource_name(dev, idx); | |
| /* | |
| * If it is already FIXED, don't change it, something | |
| * (perhaps EA or header fixups) wants it this way. | |
| */ | |
| if (res->flags & IORESOURCE_PCI_FIXED) | |
| bar64 = (res->flags & IORESOURCE_MEM_64) ? 1 : 0; | |
| else | |
| bar64 = __pci_read_base(dev, pci_bar_unknown, res, | |
| pos + PCI_SRIOV_BAR + i * 4, | |
| &sriovbars[i]); | |
| if (!res->flags) | |
| continue; | |
| if (resource_size(res) & (PAGE_SIZE - 1)) { | |
| rc = -EIO; | |
| goto failed; | |
| } | |
| iov->barsz[i] = resource_size(res); | |
| resource_set_size(res, resource_size(res) * total); | |
| pci_info(dev, "%s %pR: contains BAR %d for %d VFs\n", | |
| res_name, res, i, total); | |
| i += bar64; | |
| nres++; | |
| } | |
| iov->pos = pos; | |
| iov->nres = nres; | |
| iov->ctrl = ctrl; | |
| iov->total_VFs = total; | |
| iov->driver_max_VFs = total; | |
| pci_read_config_word(dev, pos + PCI_SRIOV_VF_DID, &iov->vf_device); | |
| iov->pgsz = pgsz; | |
| iov->self = dev; | |
| iov->drivers_autoprobe = true; | |
| pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap); | |
| pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link); | |
| if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) | |
| iov->link = PCI_DEVFN(PCI_SLOT(dev->devfn), iov->link); | |
| iov->vf_rebar_cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_VF_REBAR); | |
| if (pdev) | |
| iov->dev = pci_dev_get(pdev); | |
| else | |
| iov->dev = dev; | |
| dev->sriov = iov; | |
| dev->is_physfn = 1; | |
| rc = compute_max_vf_buses(dev); | |
| if (rc) | |
| goto fail_max_buses; | |
| return 0; | |
| fail_max_buses: | |
| dev->sriov = NULL; | |
| dev->is_physfn = 0; | |
| failed: | |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { | |
| res = &dev->resource[pci_resource_num_from_vf_bar(i)]; | |
| res->flags = 0; | |
| } | |
| kfree(iov); | |
| return rc; | |
| } | |
| static void sriov_release(struct pci_dev *dev) | |
| { | |
| BUG_ON(dev->sriov->num_VFs); | |
| if (dev != dev->sriov->dev) | |
| pci_dev_put(dev->sriov->dev); | |
| kfree(dev->sriov); | |
| dev->sriov = NULL; | |
| } | |
| static void sriov_restore_vf_rebar_state(struct pci_dev *dev) | |
| { | |
| unsigned int pos, nbars, i; | |
| u32 ctrl; | |
| pos = pci_iov_vf_rebar_cap(dev); | |
| if (!pos) | |
| return; | |
| pci_read_config_dword(dev, pos + PCI_VF_REBAR_CTRL, &ctrl); | |
| if (PCI_POSSIBLE_ERROR(ctrl)) | |
| return; | |
| nbars = FIELD_GET(PCI_VF_REBAR_CTRL_NBAR_MASK, ctrl); | |
| for (i = 0; i < nbars; i++, pos += 8) { | |
| int bar_idx, size; | |
| pci_read_config_dword(dev, pos + PCI_VF_REBAR_CTRL, &ctrl); | |
| if (PCI_POSSIBLE_ERROR(ctrl)) | |
| return; | |
| bar_idx = FIELD_GET(PCI_VF_REBAR_CTRL_BAR_IDX, ctrl); | |
| size = pci_rebar_bytes_to_size(dev->sriov->barsz[bar_idx]); | |
| FIELD_MODIFY(PCI_VF_REBAR_CTRL_BAR_SIZE, &ctrl, size); | |
| pci_write_config_dword(dev, pos + PCI_VF_REBAR_CTRL, ctrl); | |
| } | |
| } | |
| static void sriov_restore_state(struct pci_dev *dev) | |
| { | |
| int i; | |
| u16 ctrl; | |
| struct pci_sriov *iov = dev->sriov; | |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &ctrl); | |
| if (ctrl & PCI_SRIOV_CTRL_VFE) | |
| return; | |
| /* | |
| * Restore PCI_SRIOV_CTRL_ARI before pci_iov_set_numvfs() because | |
| * it reads offset & stride, which depend on PCI_SRIOV_CTRL_ARI. | |
| */ | |
| ctrl &= ~PCI_SRIOV_CTRL_ARI; | |
| ctrl |= iov->ctrl & PCI_SRIOV_CTRL_ARI; | |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, ctrl); | |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) | |
| pci_update_resource(dev, pci_resource_num_from_vf_bar(i)); | |
| pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz); | |
| pci_iov_set_numvfs(dev, iov->num_VFs); | |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); | |
| if (iov->ctrl & PCI_SRIOV_CTRL_VFE) | |
| msleep(100); | |
| } | |
| /** | |
| * pci_iov_init - initialize the IOV capability | |
| * @dev: the PCI device | |
| * | |
| * Returns 0 on success, or negative on failure. | |
| */ | |
| int pci_iov_init(struct pci_dev *dev) | |
| { | |
| int pos; | |
| if (!pci_is_pcie(dev)) | |
| return -ENODEV; | |
| pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); | |
| if (pos) | |
| return sriov_init(dev, pos); | |
| return -ENODEV; | |
| } | |
| /** | |
| * pci_iov_release - release resources used by the IOV capability | |
| * @dev: the PCI device | |
| */ | |
| void pci_iov_release(struct pci_dev *dev) | |
| { | |
| if (dev->is_physfn) | |
| sriov_release(dev); | |
| } | |
| /** | |
| * pci_iov_remove - clean up SR-IOV state after PF driver is detached | |
| * @dev: the PCI device | |
| */ | |
| void pci_iov_remove(struct pci_dev *dev) | |
| { | |
| struct pci_sriov *iov = dev->sriov; | |
| if (!dev->is_physfn) | |
| return; | |
| iov->driver_max_VFs = iov->total_VFs; | |
| if (iov->num_VFs) | |
| pci_warn(dev, "driver left SR-IOV enabled after remove\n"); | |
| } | |
| /** | |
| * pci_iov_update_resource - update a VF BAR | |
| * @dev: the PCI device | |
| * @resno: the resource number | |
| * | |
| * Update a VF BAR in the SR-IOV capability of a PF. | |
| */ | |
| void pci_iov_update_resource(struct pci_dev *dev, int resno) | |
| { | |
| struct pci_sriov *iov = dev->is_physfn ? dev->sriov : NULL; | |
| struct resource *res = pci_resource_n(dev, resno); | |
| int vf_bar = pci_resource_num_to_vf_bar(resno); | |
| struct pci_bus_region region; | |
| u16 cmd; | |
| u32 new; | |
| int reg; | |
| /* | |
| * The generic pci_restore_bars() path calls this for all devices, | |
| * including VFs and non-SR-IOV devices. If this is not a PF, we | |
| * have nothing to do. | |
| */ | |
| if (!iov) | |
| return; | |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &cmd); | |
| if ((cmd & PCI_SRIOV_CTRL_VFE) && (cmd & PCI_SRIOV_CTRL_MSE)) { | |
| dev_WARN(&dev->dev, "can't update enabled VF BAR%d %pR\n", | |
| vf_bar, res); | |
| return; | |
| } | |
| /* | |
| * Ignore unimplemented BARs, unused resource slots for 64-bit | |
| * BARs, and non-movable resources, e.g., those described via | |
| * Enhanced Allocation. | |
| */ | |
| if (!res->flags) | |
| return; | |
| if (res->flags & IORESOURCE_UNSET) | |
| return; | |
| if (res->flags & IORESOURCE_PCI_FIXED) | |
| return; | |
| pcibios_resource_to_bus(dev->bus, ®ion, res); | |
| new = region.start; | |
| new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK; | |
| reg = iov->pos + PCI_SRIOV_BAR + 4 * vf_bar; | |
| pci_write_config_dword(dev, reg, new); | |
| if (res->flags & IORESOURCE_MEM_64) { | |
| new = region.start >> 16 >> 16; | |
| pci_write_config_dword(dev, reg + 4, new); | |
| } | |
| } | |
| resource_size_t __weak pcibios_iov_resource_alignment(const struct pci_dev *dev, | |
| int resno) | |
| { | |
| return pci_iov_resource_size(dev, resno); | |
| } | |
| /** | |
| * pci_sriov_resource_alignment - get resource alignment for VF BAR | |
| * @dev: the PCI device | |
| * @resno: the resource number | |
| * | |
| * Returns the alignment of the VF BAR found in the SR-IOV capability. | |
| * This is not the same as the resource size which is defined as | |
| * the VF BAR size multiplied by the number of VFs. The alignment | |
| * is just the VF BAR size. | |
| */ | |
| resource_size_t pci_sriov_resource_alignment(const struct pci_dev *dev, | |
| int resno) | |
| { | |
| return pcibios_iov_resource_alignment(dev, resno); | |
| } | |
| /** | |
| * pci_restore_iov_state - restore the state of the IOV capability | |
| * @dev: the PCI device | |
| */ | |
| void pci_restore_iov_state(struct pci_dev *dev) | |
| { | |
| if (dev->is_physfn) { | |
| sriov_restore_vf_rebar_state(dev); | |
| sriov_restore_state(dev); | |
| } | |
| } | |
| /** | |
| * pci_vf_drivers_autoprobe - set PF property drivers_autoprobe for VFs | |
| * @dev: the PCI device | |
| * @auto_probe: set VF drivers auto probe flag | |
| */ | |
| void pci_vf_drivers_autoprobe(struct pci_dev *dev, bool auto_probe) | |
| { | |
| if (dev->is_physfn) | |
| dev->sriov->drivers_autoprobe = auto_probe; | |
| } | |
| /** | |
| * pci_iov_bus_range - find bus range used by Virtual Function | |
| * @bus: the PCI bus | |
| * | |
| * Returns max number of buses (exclude current one) used by Virtual | |
| * Functions. | |
| */ | |
| int pci_iov_bus_range(struct pci_bus *bus) | |
| { | |
| int max = 0; | |
| struct pci_dev *dev; | |
| list_for_each_entry(dev, &bus->devices, bus_list) { | |
| if (!dev->is_physfn) | |
| continue; | |
| if (dev->sriov->max_VF_buses > max) | |
| max = dev->sriov->max_VF_buses; | |
| } | |
| return max ? max - bus->number : 0; | |
| } | |
| /** | |
| * pci_enable_sriov - enable the SR-IOV capability | |
| * @dev: the PCI device | |
| * @nr_virtfn: number of virtual functions to enable | |
| * | |
| * Returns 0 on success, or negative on failure. | |
| */ | |
| int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) | |
| { | |
| might_sleep(); | |
| if (!dev->is_physfn) | |
| return -ENOSYS; | |
| return sriov_enable(dev, nr_virtfn); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_enable_sriov); | |
| /** | |
| * pci_disable_sriov - disable the SR-IOV capability | |
| * @dev: the PCI device | |
| */ | |
| void pci_disable_sriov(struct pci_dev *dev) | |
| { | |
| might_sleep(); | |
| if (!dev->is_physfn) | |
| return; | |
| sriov_disable(dev); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_disable_sriov); | |
| /** | |
| * pci_num_vf - return number of VFs associated with a PF device_release_driver | |
| * @dev: the PCI device | |
| * | |
| * Returns number of VFs, or 0 if SR-IOV is not enabled. | |
| */ | |
| int pci_num_vf(struct pci_dev *dev) | |
| { | |
| if (!dev->is_physfn) | |
| return 0; | |
| return dev->sriov->num_VFs; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_num_vf); | |
| /** | |
| * pci_vfs_assigned - returns number of VFs are assigned to a guest | |
| * @dev: the PCI device | |
| * | |
| * Returns number of VFs belonging to this device that are assigned to a guest. | |
| * If device is not a physical function returns 0. | |
| */ | |
| int pci_vfs_assigned(struct pci_dev *dev) | |
| { | |
| struct pci_dev *vfdev; | |
| unsigned int vfs_assigned = 0; | |
| unsigned short dev_id; | |
| /* only search if we are a PF */ | |
| if (!dev->is_physfn) | |
| return 0; | |
| /* | |
| * determine the device ID for the VFs, the vendor ID will be the | |
| * same as the PF so there is no need to check for that one | |
| */ | |
| dev_id = dev->sriov->vf_device; | |
| /* loop through all the VFs to see if we own any that are assigned */ | |
| vfdev = pci_get_device(dev->vendor, dev_id, NULL); | |
| while (vfdev) { | |
| /* | |
| * It is considered assigned if it is a virtual function with | |
| * our dev as the physical function and the assigned bit is set | |
| */ | |
| if (vfdev->is_virtfn && (vfdev->physfn == dev) && | |
| pci_is_dev_assigned(vfdev)) | |
| vfs_assigned++; | |
| vfdev = pci_get_device(dev->vendor, dev_id, vfdev); | |
| } | |
| return vfs_assigned; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_vfs_assigned); | |
| /** | |
| * pci_sriov_set_totalvfs -- reduce the TotalVFs available | |
| * @dev: the PCI PF device | |
| * @numvfs: number that should be used for TotalVFs supported | |
| * | |
| * Should be called from PF driver's probe routine with | |
| * device's mutex held. | |
| * | |
| * Returns 0 if PF is an SRIOV-capable device and | |
| * value of numvfs valid. If not a PF return -ENOSYS; | |
| * if numvfs is invalid return -EINVAL; | |
| * if VFs already enabled, return -EBUSY. | |
| */ | |
| int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) | |
| { | |
| if (!dev->is_physfn) | |
| return -ENOSYS; | |
| if (numvfs > dev->sriov->total_VFs) | |
| return -EINVAL; | |
| /* Shouldn't change if VFs already enabled */ | |
| if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) | |
| return -EBUSY; | |
| dev->sriov->driver_max_VFs = numvfs; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs); | |
| /** | |
| * pci_sriov_get_totalvfs -- get total VFs supported on this device | |
| * @dev: the PCI PF device | |
| * | |
| * For a PCIe device with SRIOV support, return the PCIe | |
| * SRIOV capability value of TotalVFs or the value of driver_max_VFs | |
| * if the driver reduced it. Otherwise 0. | |
| */ | |
| int pci_sriov_get_totalvfs(struct pci_dev *dev) | |
| { | |
| if (!dev->is_physfn) | |
| return 0; | |
| return dev->sriov->driver_max_VFs; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_sriov_get_totalvfs); | |
| /** | |
| * pci_sriov_configure_simple - helper to configure SR-IOV | |
| * @dev: the PCI device | |
| * @nr_virtfn: number of virtual functions to enable, 0 to disable | |
| * | |
| * Enable or disable SR-IOV for devices that don't require any PF setup | |
| * before enabling SR-IOV. Return value is negative on error, or number of | |
| * VFs allocated on success. | |
| */ | |
| int pci_sriov_configure_simple(struct pci_dev *dev, int nr_virtfn) | |
| { | |
| int rc; | |
| might_sleep(); | |
| if (!dev->is_physfn) | |
| return -ENODEV; | |
| if (pci_vfs_assigned(dev)) { | |
| pci_warn(dev, "Cannot modify SR-IOV while VFs are assigned\n"); | |
| return -EPERM; | |
| } | |
| if (nr_virtfn == 0) { | |
| sriov_disable(dev); | |
| return 0; | |
| } | |
| rc = sriov_enable(dev, nr_virtfn); | |
| if (rc < 0) | |
| return rc; | |
| return nr_virtfn; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_sriov_configure_simple); | |
| /** | |
| * pci_iov_vf_bar_set_size - set a new size for a VF BAR | |
| * @dev: the PCI device | |
| * @resno: the resource number | |
| * @size: new size as defined in the spec (0=1MB, 31=128TB) | |
| * | |
| * Set the new size of a VF BAR that supports VF resizable BAR capability. | |
| * Unlike pci_resize_resource(), this does not cause the resource that | |
| * reserves the MMIO space (originally up to total_VFs) to be resized, which | |
| * means that following calls to pci_enable_sriov() can fail if the resources | |
| * no longer fit. | |
| * | |
| * Return: 0 on success, or negative on failure. | |
| */ | |
| int pci_iov_vf_bar_set_size(struct pci_dev *dev, int resno, int size) | |
| { | |
| if (!pci_resource_is_iov(resno)) | |
| return -EINVAL; | |
| if (pci_iov_is_memory_decoding_enabled(dev)) | |
| return -EBUSY; | |
| if (!pci_rebar_size_supported(dev, resno, size)) | |
| return -EINVAL; | |
| return pci_rebar_set_size(dev, resno, size); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_iov_vf_bar_set_size); | |
| /** | |
| * pci_iov_vf_bar_get_sizes - get VF BAR sizes allowing to create up to num_vfs | |
| * @dev: the PCI device | |
| * @resno: the resource number | |
| * @num_vfs: number of VFs | |
| * | |
| * Get the sizes of a VF resizable BAR that can accommodate @num_vfs within | |
| * the currently assigned size of the resource @resno. | |
| * | |
| * Return: A bitmask of sizes in format defined in the spec (bit 0=1MB, | |
| * bit 31=128TB). | |
| */ | |
| u32 pci_iov_vf_bar_get_sizes(struct pci_dev *dev, int resno, int num_vfs) | |
| { | |
| u64 vf_len = pci_resource_len(dev, resno); | |
| u64 sizes; | |
| if (!num_vfs) | |
| return 0; | |
| do_div(vf_len, num_vfs); | |
| sizes = (roundup_pow_of_two(vf_len + 1) - 1) >> ilog2(SZ_1M); | |
| return sizes & pci_rebar_get_possible_sizes(dev, resno); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_iov_vf_bar_get_sizes); |