| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * PCI Resizable BAR Extended Capability handling. | |
| */ | |
| #include <linux/bits.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/bitops.h> | |
| #include <linux/errno.h> | |
| #include <linux/export.h> | |
| #include <linux/ioport.h> | |
| #include <linux/log2.h> | |
| #include <linux/pci.h> | |
| #include <linux/sizes.h> | |
| #include <linux/types.h> | |
| #include "pci.h" | |
| #define PCI_REBAR_MIN_SIZE ((resource_size_t)SZ_1M) | |
| /** | |
| * pci_rebar_bytes_to_size - Convert size in bytes to PCI BAR Size | |
| * @bytes: size in bytes | |
| * | |
| * Convert size in bytes to encoded BAR Size in Resizable BAR Capability | |
| * (PCIe r6.2, sec. 7.8.6.3). | |
| * | |
| * Return: encoded BAR Size as defined in the PCIe spec (0=1MB, 31=128TB) | |
| */ | |
| int pci_rebar_bytes_to_size(u64 bytes) | |
| { | |
| int rebar_minsize = ilog2(PCI_REBAR_MIN_SIZE); | |
| bytes = roundup_pow_of_two(bytes); | |
| return max(ilog2(bytes), rebar_minsize) - rebar_minsize; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_rebar_bytes_to_size); | |
| /** | |
| * pci_rebar_size_to_bytes - Convert encoded BAR Size to size in bytes | |
| * @size: encoded BAR Size as defined in the PCIe spec (0=1MB, 31=128TB) | |
| * | |
| * Return: BAR size in bytes | |
| */ | |
| resource_size_t pci_rebar_size_to_bytes(int size) | |
| { | |
| return 1ULL << (size + ilog2(PCI_REBAR_MIN_SIZE)); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_rebar_size_to_bytes); | |
| void pci_rebar_init(struct pci_dev *pdev) | |
| { | |
| pdev->rebar_cap = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR); | |
| } | |
| /** | |
| * pci_rebar_find_pos - find position of resize control reg for BAR | |
| * @pdev: PCI device | |
| * @bar: BAR to find | |
| * | |
| * Helper to find the position of the control register for a BAR. | |
| * | |
| * Return: | |
| * * %-ENOTSUPP if resizable BARs are not supported at all, | |
| * * %-ENOENT if no control register for the BAR could be found. | |
| */ | |
| static int pci_rebar_find_pos(struct pci_dev *pdev, int bar) | |
| { | |
| unsigned int pos, nbars, i; | |
| u32 ctrl; | |
| if (pci_resource_is_iov(bar)) { | |
| pos = pci_iov_vf_rebar_cap(pdev); | |
| bar = pci_resource_num_to_vf_bar(bar); | |
| } else { | |
| pos = pdev->rebar_cap; | |
| } | |
| if (!pos) | |
| return -ENOTSUPP; | |
| pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); | |
| nbars = FIELD_GET(PCI_REBAR_CTRL_NBAR_MASK, ctrl); | |
| for (i = 0; i < nbars; i++, pos += 8) { | |
| int bar_idx; | |
| pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); | |
| bar_idx = FIELD_GET(PCI_REBAR_CTRL_BAR_IDX, ctrl); | |
| if (bar_idx == bar) | |
| return pos; | |
| } | |
| return -ENOENT; | |
| } | |
| /** | |
| * pci_rebar_get_possible_sizes - get possible sizes for Resizable BAR | |
| * @pdev: PCI device | |
| * @bar: BAR to query | |
| * | |
| * Get the possible sizes of a resizable BAR as bitmask. | |
| * | |
| * Return: A bitmask of possible sizes (bit 0=1MB, bit 31=128TB), or %0 if | |
| * BAR isn't resizable. | |
| */ | |
| u64 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar) | |
| { | |
| int pos; | |
| u32 cap; | |
| pos = pci_rebar_find_pos(pdev, bar); | |
| if (pos < 0) | |
| return 0; | |
| pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap); | |
| cap = FIELD_GET(PCI_REBAR_CAP_SIZES, cap); | |
| /* Sapphire RX 5600 XT Pulse has an invalid cap dword for BAR 0 */ | |
| if (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x731f && | |
| bar == 0 && cap == 0x700) | |
| return 0x3f00; | |
| return cap; | |
| } | |
| EXPORT_SYMBOL(pci_rebar_get_possible_sizes); | |
| /** | |
| * pci_rebar_size_supported - check if size is supported for BAR | |
| * @pdev: PCI device | |
| * @bar: BAR to check | |
| * @size: encoded size as defined in the PCIe spec (0=1MB, 31=128TB) | |
| * | |
| * Return: %true if @bar is resizable and @size is supported, otherwise | |
| * %false. | |
| */ | |
| bool pci_rebar_size_supported(struct pci_dev *pdev, int bar, int size) | |
| { | |
| u64 sizes = pci_rebar_get_possible_sizes(pdev, bar); | |
| if (size < 0 || size > ilog2(SZ_128T) - ilog2(PCI_REBAR_MIN_SIZE)) | |
| return false; | |
| return BIT(size) & sizes; | |
| } | |
| EXPORT_SYMBOL_GPL(pci_rebar_size_supported); | |
| /** | |
| * pci_rebar_get_max_size - get the maximum supported size of a BAR | |
| * @pdev: PCI device | |
| * @bar: BAR to query | |
| * | |
| * Get the largest supported size of a resizable BAR as a size. | |
| * | |
| * Return: the encoded maximum BAR size as defined in the PCIe spec | |
| * (0=1MB, 31=128TB), or %-NOENT on error. | |
| */ | |
| int pci_rebar_get_max_size(struct pci_dev *pdev, int bar) | |
| { | |
| u64 sizes; | |
| sizes = pci_rebar_get_possible_sizes(pdev, bar); | |
| if (!sizes) | |
| return -ENOENT; | |
| return __fls(sizes); | |
| } | |
| EXPORT_SYMBOL_GPL(pci_rebar_get_max_size); | |
| /** | |
| * pci_rebar_get_current_size - get the current size of a Resizable BAR | |
| * @pdev: PCI device | |
| * @bar: BAR to get the size from | |
| * | |
| * Read the current size of a BAR from the Resizable BAR config. | |
| * | |
| * Return: BAR Size if @bar is resizable (0=1MB, 31=128TB), or negative on | |
| * error. | |
| */ | |
| int pci_rebar_get_current_size(struct pci_dev *pdev, int bar) | |
| { | |
| int pos; | |
| u32 ctrl; | |
| pos = pci_rebar_find_pos(pdev, bar); | |
| if (pos < 0) | |
| return pos; | |
| pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); | |
| return FIELD_GET(PCI_REBAR_CTRL_BAR_SIZE, ctrl); | |
| } | |
| /** | |
| * pci_rebar_set_size - set a new size for a Resizable BAR | |
| * @pdev: PCI device | |
| * @bar: BAR to set size to | |
| * @size: new size as defined in the PCIe spec (0=1MB, 31=128TB) | |
| * | |
| * Set the new size of a BAR as defined in the spec. | |
| * | |
| * Return: %0 if resizing was successful, or negative on error. | |
| */ | |
| int pci_rebar_set_size(struct pci_dev *pdev, int bar, int size) | |
| { | |
| int pos; | |
| u32 ctrl; | |
| pos = pci_rebar_find_pos(pdev, bar); | |
| if (pos < 0) | |
| return pos; | |
| pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); | |
| FIELD_MODIFY(PCI_REBAR_CTRL_BAR_SIZE, &ctrl, size); | |
| pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl); | |
| if (pci_resource_is_iov(bar)) | |
| pci_iov_resource_set_size(pdev, bar, size); | |
| return 0; | |
| } | |
| void pci_restore_rebar_state(struct pci_dev *pdev) | |
| { | |
| unsigned int pos, nbars, i; | |
| u32 ctrl; | |
| pos = pdev->rebar_cap; | |
| if (!pos) | |
| return; | |
| pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); | |
| if (PCI_POSSIBLE_ERROR(ctrl)) | |
| return; | |
| nbars = FIELD_GET(PCI_REBAR_CTRL_NBAR_MASK, ctrl); | |
| for (i = 0; i < nbars; i++, pos += 8) { | |
| struct resource *res; | |
| int bar_idx, size; | |
| pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl); | |
| if (PCI_POSSIBLE_ERROR(ctrl)) | |
| return; | |
| bar_idx = ctrl & PCI_REBAR_CTRL_BAR_IDX; | |
| res = pci_resource_n(pdev, bar_idx); | |
| size = pci_rebar_bytes_to_size(resource_size(res)); | |
| FIELD_MODIFY(PCI_REBAR_CTRL_BAR_SIZE, &ctrl, size); | |
| pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl); | |
| } | |
| } | |
| static bool pci_resize_is_memory_decoding_enabled(struct pci_dev *dev, | |
| int resno) | |
| { | |
| u16 cmd; | |
| if (pci_resource_is_iov(resno)) | |
| return pci_iov_is_memory_decoding_enabled(dev); | |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); | |
| return cmd & PCI_COMMAND_MEMORY; | |
| } | |
| void pci_resize_resource_set_size(struct pci_dev *dev, int resno, int size) | |
| { | |
| resource_size_t res_size = pci_rebar_size_to_bytes(size); | |
| struct resource *res = pci_resource_n(dev, resno); | |
| if (pci_resource_is_iov(resno)) | |
| res_size *= pci_sriov_get_totalvfs(dev); | |
| resource_set_size(res, res_size); | |
| } | |
| /** | |
| * pci_resize_resource - reconfigure a Resizable BAR and resources | |
| * @dev: the PCI device | |
| * @resno: index of the BAR to be resized | |
| * @size: new size as defined in the spec (0=1MB, 31=128TB) | |
| * @exclude_bars: a mask of BARs that should not be released | |
| * | |
| * Reconfigure @resno to @size and re-run resource assignment algorithm | |
| * with the new size. | |
| * | |
| * Prior to resize, release @dev resources that share a bridge window with | |
| * @resno. This unpins the bridge window resource to allow changing it. | |
| * | |
| * The caller may prevent releasing a particular BAR by providing | |
| * @exclude_bars mask, but this may result in the resize operation failing | |
| * due to insufficient space. | |
| * | |
| * Return: 0 on success, or negative on error. In case of an error, the | |
| * resources are restored to their original places. | |
| */ | |
| int pci_resize_resource(struct pci_dev *dev, int resno, int size, | |
| int exclude_bars) | |
| { | |
| struct pci_host_bridge *host; | |
| /* Check if we must preserve the firmware's resource assignment */ | |
| host = pci_find_host_bridge(dev->bus); | |
| if (host->preserve_config) | |
| return -ENOTSUPP; | |
| if (pci_resize_is_memory_decoding_enabled(dev, resno)) | |
| return -EBUSY; | |
| if (!pci_rebar_size_supported(dev, resno, size)) | |
| return -EINVAL; | |
| return pci_do_resource_release_and_resize(dev, resno, size, exclude_bars); | |
| } | |
| EXPORT_SYMBOL(pci_resize_resource); |