| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Intel LGM USB PHY driver | |
| * | |
| * Copyright (C) 2020 Intel Corporation. | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/delay.h> | |
| #include <linux/iopoll.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/reset.h> | |
| #include <linux/usb/phy.h> | |
| #include <linux/workqueue.h> | |
| #define CTRL1_OFFSET 0x14 | |
| #define SRAM_EXT_LD_DONE BIT(25) | |
| #define SRAM_INIT_DONE BIT(26) | |
| #define TCPC_OFFSET 0x1014 | |
| #define TCPC_MUX_CTL GENMASK(1, 0) | |
| #define MUX_NC 0 | |
| #define MUX_USB 1 | |
| #define MUX_DP 2 | |
| #define MUX_USBDP 3 | |
| #define TCPC_FLIPPED BIT(2) | |
| #define TCPC_LOW_POWER_EN BIT(3) | |
| #define TCPC_VALID BIT(4) | |
| #define TCPC_CONN \ | |
| (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_USB)) | |
| #define TCPC_DISCONN \ | |
| (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_NC) | TCPC_LOW_POWER_EN) | |
| static const char *const PHY_RESETS[] = { "phy31", "phy", }; | |
| static const char *const CTL_RESETS[] = { "apb", "ctrl", }; | |
| struct tca_apb { | |
| struct reset_control *resets[ARRAY_SIZE(PHY_RESETS)]; | |
| struct regulator *vbus; | |
| struct work_struct wk; | |
| struct usb_phy phy; | |
| bool regulator_enabled; | |
| bool phy_initialized; | |
| bool connected; | |
| }; | |
| static int get_flipped(struct tca_apb *ta, bool *flipped) | |
| { | |
| union extcon_property_value property; | |
| int ret; | |
| ret = extcon_get_property(ta->phy.edev, EXTCON_USB_HOST, | |
| EXTCON_PROP_USB_TYPEC_POLARITY, &property); | |
| if (ret) { | |
| dev_err(ta->phy.dev, "no polarity property from extcon\n"); | |
| return ret; | |
| } | |
| *flipped = property.intval; | |
| return 0; | |
| } | |
| static int phy_init(struct usb_phy *phy) | |
| { | |
| struct tca_apb *ta = container_of(phy, struct tca_apb, phy); | |
| void __iomem *ctrl1 = phy->io_priv + CTRL1_OFFSET; | |
| int val, ret, i; | |
| if (ta->phy_initialized) | |
| return 0; | |
| for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) | |
| reset_control_deassert(ta->resets[i]); | |
| ret = readl_poll_timeout(ctrl1, val, val & SRAM_INIT_DONE, 10, 10 * 1000); | |
| if (ret) { | |
| dev_err(ta->phy.dev, "SRAM init failed, 0x%x\n", val); | |
| return ret; | |
| } | |
| writel(readl(ctrl1) | SRAM_EXT_LD_DONE, ctrl1); | |
| ta->phy_initialized = true; | |
| if (!ta->phy.edev) { | |
| writel(TCPC_CONN, ta->phy.io_priv + TCPC_OFFSET); | |
| return phy->set_vbus(phy, true); | |
| } | |
| schedule_work(&ta->wk); | |
| return ret; | |
| } | |
| static void phy_shutdown(struct usb_phy *phy) | |
| { | |
| struct tca_apb *ta = container_of(phy, struct tca_apb, phy); | |
| int i; | |
| if (!ta->phy_initialized) | |
| return; | |
| ta->phy_initialized = false; | |
| flush_work(&ta->wk); | |
| ta->phy.set_vbus(&ta->phy, false); | |
| ta->connected = false; | |
| writel(TCPC_DISCONN, ta->phy.io_priv + TCPC_OFFSET); | |
| for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) | |
| reset_control_assert(ta->resets[i]); | |
| } | |
| static int phy_set_vbus(struct usb_phy *phy, int on) | |
| { | |
| struct tca_apb *ta = container_of(phy, struct tca_apb, phy); | |
| int ret; | |
| if (!!on == ta->regulator_enabled) | |
| return 0; | |
| if (on) | |
| ret = regulator_enable(ta->vbus); | |
| else | |
| ret = regulator_disable(ta->vbus); | |
| if (!ret) | |
| ta->regulator_enabled = on; | |
| dev_dbg(ta->phy.dev, "set vbus: %d\n", on); | |
| return ret; | |
| } | |
| static void tca_work(struct work_struct *work) | |
| { | |
| struct tca_apb *ta = container_of(work, struct tca_apb, wk); | |
| bool connected; | |
| bool flipped = false; | |
| u32 val; | |
| int ret; | |
| ret = get_flipped(ta, &flipped); | |
| if (ret) | |
| return; | |
| connected = extcon_get_state(ta->phy.edev, EXTCON_USB_HOST); | |
| if (connected == ta->connected) | |
| return; | |
| ta->connected = connected; | |
| if (connected) { | |
| val = TCPC_CONN; | |
| if (flipped) | |
| val |= TCPC_FLIPPED; | |
| dev_dbg(ta->phy.dev, "connected%s\n", flipped ? " flipped" : ""); | |
| } else { | |
| val = TCPC_DISCONN; | |
| dev_dbg(ta->phy.dev, "disconnected\n"); | |
| } | |
| writel(val, ta->phy.io_priv + TCPC_OFFSET); | |
| ret = ta->phy.set_vbus(&ta->phy, connected); | |
| if (ret) | |
| dev_err(ta->phy.dev, "failed to set VBUS\n"); | |
| } | |
| static int id_notifier(struct notifier_block *nb, unsigned long event, void *ptr) | |
| { | |
| struct tca_apb *ta = container_of(nb, struct tca_apb, phy.id_nb); | |
| if (ta->phy_initialized) | |
| schedule_work(&ta->wk); | |
| return NOTIFY_DONE; | |
| } | |
| static int vbus_notifier(struct notifier_block *nb, unsigned long evnt, void *ptr) | |
| { | |
| return NOTIFY_DONE; | |
| } | |
| static int phy_probe(struct platform_device *pdev) | |
| { | |
| struct reset_control *resets[ARRAY_SIZE(CTL_RESETS)]; | |
| struct device *dev = &pdev->dev; | |
| struct usb_phy *phy; | |
| struct tca_apb *ta; | |
| int i; | |
| ta = devm_kzalloc(dev, sizeof(*ta), GFP_KERNEL); | |
| if (!ta) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, ta); | |
| INIT_WORK(&ta->wk, tca_work); | |
| phy = &ta->phy; | |
| phy->dev = dev; | |
| phy->label = dev_name(dev); | |
| phy->type = USB_PHY_TYPE_USB3; | |
| phy->init = phy_init; | |
| phy->shutdown = phy_shutdown; | |
| phy->set_vbus = phy_set_vbus; | |
| phy->id_nb.notifier_call = id_notifier; | |
| phy->vbus_nb.notifier_call = vbus_notifier; | |
| phy->io_priv = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(phy->io_priv)) | |
| return PTR_ERR(phy->io_priv); | |
| ta->vbus = devm_regulator_get(dev, "vbus"); | |
| if (IS_ERR(ta->vbus)) | |
| return PTR_ERR(ta->vbus); | |
| for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) { | |
| resets[i] = devm_reset_control_get_exclusive(dev, CTL_RESETS[i]); | |
| if (IS_ERR(resets[i])) { | |
| dev_err(dev, "%s reset not found\n", CTL_RESETS[i]); | |
| return PTR_ERR(resets[i]); | |
| } | |
| } | |
| for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) { | |
| ta->resets[i] = devm_reset_control_get_exclusive(dev, PHY_RESETS[i]); | |
| if (IS_ERR(ta->resets[i])) { | |
| dev_err(dev, "%s reset not found\n", PHY_RESETS[i]); | |
| return PTR_ERR(ta->resets[i]); | |
| } | |
| } | |
| for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) | |
| reset_control_assert(resets[i]); | |
| for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) | |
| reset_control_assert(ta->resets[i]); | |
| /* | |
| * Out-of-band reset of the controller after PHY reset will cause | |
| * controller malfunctioning, so we should use in-band controller | |
| * reset only and leave the controller de-asserted here. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) | |
| reset_control_deassert(resets[i]); | |
| /* Need to wait at least 20us after de-assert the controller */ | |
| usleep_range(20, 100); | |
| return usb_add_phy_dev(phy); | |
| } | |
| static void phy_remove(struct platform_device *pdev) | |
| { | |
| struct tca_apb *ta = platform_get_drvdata(pdev); | |
| usb_remove_phy(&ta->phy); | |
| } | |
| static const struct of_device_id intel_usb_phy_dt_ids[] = { | |
| { .compatible = "intel,lgm-usb-phy" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, intel_usb_phy_dt_ids); | |
| static struct platform_driver lgm_phy_driver = { | |
| .driver = { | |
| .name = "lgm-usb-phy", | |
| .of_match_table = intel_usb_phy_dt_ids, | |
| }, | |
| .probe = phy_probe, | |
| .remove = phy_remove, | |
| }; | |
| module_platform_driver(lgm_phy_driver); | |
| MODULE_DESCRIPTION("Intel LGM USB PHY driver"); | |
| MODULE_AUTHOR("Li Yin <yin1.li@intel.com>"); | |
| MODULE_AUTHOR("Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com>"); | |
| MODULE_LICENSE("GPL v2"); |