| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Real Time Clock interface for Linux on Atmel AT91RM9200 | |
| * | |
| * Copyright (C) 2002 Rick Bronson | |
| * | |
| * Converted to RTC class model by Andrew Victor | |
| * | |
| * Ported to Linux 2.6 by Steven Scholz | |
| * Based on s3c2410-rtc.c Simtec Electronics | |
| * | |
| * Based on sa1100-rtc.c by Nils Faerber | |
| * Based on rtc.c by Paul Gortmaker | |
| */ | |
| #include <linux/bcd.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/clk.h> | |
| #include <linux/completion.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ioctl.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/rtc.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/suspend.h> | |
| #include <linux/time.h> | |
| #include <linux/uaccess.h> | |
| #define AT91_RTC_CR 0x00 /* Control Register */ | |
| #define AT91_RTC_UPDTIM BIT(0) /* Update Request Time Register */ | |
| #define AT91_RTC_UPDCAL BIT(1) /* Update Request Calendar Register */ | |
| #define AT91_RTC_MR 0x04 /* Mode Register */ | |
| #define AT91_RTC_HRMOD BIT(0) /* 12/24 hour mode */ | |
| #define AT91_RTC_NEGPPM BIT(4) /* Negative PPM correction */ | |
| #define AT91_RTC_CORRECTION GENMASK(14, 8) /* Slow clock correction */ | |
| #define AT91_RTC_HIGHPPM BIT(15) /* High PPM correction */ | |
| #define AT91_RTC_TIMR 0x08 /* Time Register */ | |
| #define AT91_RTC_SEC GENMASK(6, 0) /* Current Second */ | |
| #define AT91_RTC_MIN GENMASK(14, 8) /* Current Minute */ | |
| #define AT91_RTC_HOUR GENMASK(21, 16) /* Current Hour */ | |
| #define AT91_RTC_AMPM BIT(22) /* Ante Meridiem Post Meridiem Indicator */ | |
| #define AT91_RTC_CALR 0x0c /* Calendar Register */ | |
| #define AT91_RTC_CENT GENMASK(6, 0) /* Current Century */ | |
| #define AT91_RTC_YEAR GENMASK(15, 8) /* Current Year */ | |
| #define AT91_RTC_MONTH GENMASK(20, 16) /* Current Month */ | |
| #define AT91_RTC_DAY GENMASK(23, 21) /* Current Day */ | |
| #define AT91_RTC_DATE GENMASK(29, 24) /* Current Date */ | |
| #define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */ | |
| #define AT91_RTC_SECEN BIT(7) /* Second Alarm Enable */ | |
| #define AT91_RTC_MINEN BIT(15) /* Minute Alarm Enable */ | |
| #define AT91_RTC_HOUREN BIT(23) /* Hour Alarm Enable */ | |
| #define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */ | |
| #define AT91_RTC_MTHEN BIT(23) /* Month Alarm Enable */ | |
| #define AT91_RTC_DATEEN BIT(31) /* Date Alarm Enable */ | |
| #define AT91_RTC_SR 0x18 /* Status Register */ | |
| #define AT91_RTC_ACKUPD BIT(0) /* Acknowledge for Update */ | |
| #define AT91_RTC_ALARM BIT(1) /* Alarm Flag */ | |
| #define AT91_RTC_SECEV BIT(2) /* Second Event */ | |
| #define AT91_RTC_TIMEV BIT(3) /* Time Event */ | |
| #define AT91_RTC_CALEV BIT(4) /* Calendar Event */ | |
| #define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ | |
| #define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ | |
| #define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ | |
| #define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ | |
| #define AT91_RTC_VER 0x2c /* Valid Entry Register */ | |
| #define AT91_RTC_NVTIM BIT(0) /* Non valid Time */ | |
| #define AT91_RTC_NVCAL BIT(1) /* Non valid Calendar */ | |
| #define AT91_RTC_NVTIMALR BIT(2) /* Non valid Time Alarm */ | |
| #define AT91_RTC_NVCALALR BIT(3) /* Non valid Calendar Alarm */ | |
| #define AT91_RTC_CORR_DIVIDEND 3906000 | |
| #define AT91_RTC_CORR_LOW_RATIO 20 | |
| #define at91_rtc_read(field) \ | |
| readl_relaxed(at91_rtc_regs + field) | |
| #define at91_rtc_write(field, val) \ | |
| writel_relaxed((val), at91_rtc_regs + field) | |
| struct at91_rtc_config { | |
| bool use_shadow_imr; | |
| bool has_correction; | |
| }; | |
| static const struct at91_rtc_config *at91_rtc_config; | |
| static DECLARE_COMPLETION(at91_rtc_updated); | |
| static DECLARE_COMPLETION(at91_rtc_upd_rdy); | |
| static void __iomem *at91_rtc_regs; | |
| static int irq; | |
| static DEFINE_SPINLOCK(at91_rtc_lock); | |
| static u32 at91_rtc_shadow_imr; | |
| static bool suspended; | |
| static DEFINE_SPINLOCK(suspended_lock); | |
| static unsigned long cached_events; | |
| static u32 at91_rtc_imr; | |
| static struct clk *sclk; | |
| static void at91_rtc_write_ier(u32 mask) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&at91_rtc_lock, flags); | |
| at91_rtc_shadow_imr |= mask; | |
| at91_rtc_write(AT91_RTC_IER, mask); | |
| spin_unlock_irqrestore(&at91_rtc_lock, flags); | |
| } | |
| static void at91_rtc_write_idr(u32 mask) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&at91_rtc_lock, flags); | |
| at91_rtc_write(AT91_RTC_IDR, mask); | |
| /* | |
| * Register read back (of any RTC-register) needed to make sure | |
| * IDR-register write has reached the peripheral before updating | |
| * shadow mask. | |
| * | |
| * Note that there is still a possibility that the mask is updated | |
| * before interrupts have actually been disabled in hardware. The only | |
| * way to be certain would be to poll the IMR-register, which is | |
| * the very register we are trying to emulate. The register read back | |
| * is a reasonable heuristic. | |
| */ | |
| at91_rtc_read(AT91_RTC_SR); | |
| at91_rtc_shadow_imr &= ~mask; | |
| spin_unlock_irqrestore(&at91_rtc_lock, flags); | |
| } | |
| static u32 at91_rtc_read_imr(void) | |
| { | |
| unsigned long flags; | |
| u32 mask; | |
| if (at91_rtc_config->use_shadow_imr) { | |
| spin_lock_irqsave(&at91_rtc_lock, flags); | |
| mask = at91_rtc_shadow_imr; | |
| spin_unlock_irqrestore(&at91_rtc_lock, flags); | |
| } else { | |
| mask = at91_rtc_read(AT91_RTC_IMR); | |
| } | |
| return mask; | |
| } | |
| /* | |
| * Decode time/date into rtc_time structure | |
| */ | |
| static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg, | |
| struct rtc_time *tm) | |
| { | |
| unsigned int time, date; | |
| /* must read twice in case it changes */ | |
| do { | |
| time = at91_rtc_read(timereg); | |
| date = at91_rtc_read(calreg); | |
| } while ((time != at91_rtc_read(timereg)) || | |
| (date != at91_rtc_read(calreg))); | |
| tm->tm_sec = bcd2bin(FIELD_GET(AT91_RTC_SEC, time)); | |
| tm->tm_min = bcd2bin(FIELD_GET(AT91_RTC_MIN, time)); | |
| tm->tm_hour = bcd2bin(FIELD_GET(AT91_RTC_HOUR, time)); | |
| /* | |
| * The Calendar Alarm register does not have a field for | |
| * the year - so these will return an invalid value. | |
| */ | |
| tm->tm_year = bcd2bin(date & AT91_RTC_CENT) * 100; /* century */ | |
| tm->tm_year += bcd2bin(FIELD_GET(AT91_RTC_YEAR, date)); /* year */ | |
| tm->tm_wday = bcd2bin(FIELD_GET(AT91_RTC_DAY, date)) - 1; /* day of the week [0-6], Sunday=0 */ | |
| tm->tm_mon = bcd2bin(FIELD_GET(AT91_RTC_MONTH, date)) - 1; | |
| tm->tm_mday = bcd2bin(FIELD_GET(AT91_RTC_DATE, date)); | |
| } | |
| /* | |
| * Read current time and date in RTC | |
| */ | |
| static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm) | |
| { | |
| at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, tm); | |
| tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year); | |
| tm->tm_year = tm->tm_year - 1900; | |
| dev_dbg(dev, "%s(): %ptR\n", __func__, tm); | |
| return 0; | |
| } | |
| /* | |
| * Set current time and date in RTC | |
| */ | |
| static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) | |
| { | |
| unsigned long cr; | |
| dev_dbg(dev, "%s(): %ptR\n", __func__, tm); | |
| wait_for_completion(&at91_rtc_upd_rdy); | |
| /* Stop Time/Calendar from counting */ | |
| cr = at91_rtc_read(AT91_RTC_CR); | |
| at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM); | |
| at91_rtc_write_ier(AT91_RTC_ACKUPD); | |
| wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */ | |
| at91_rtc_write_idr(AT91_RTC_ACKUPD); | |
| at91_rtc_write(AT91_RTC_TIMR, | |
| FIELD_PREP(AT91_RTC_SEC, bin2bcd(tm->tm_sec)) | |
| | FIELD_PREP(AT91_RTC_MIN, bin2bcd(tm->tm_min)) | |
| | FIELD_PREP(AT91_RTC_HOUR, bin2bcd(tm->tm_hour))); | |
| at91_rtc_write(AT91_RTC_CALR, | |
| FIELD_PREP(AT91_RTC_CENT, | |
| bin2bcd((tm->tm_year + 1900) / 100)) | |
| | FIELD_PREP(AT91_RTC_YEAR, bin2bcd(tm->tm_year % 100)) | |
| | FIELD_PREP(AT91_RTC_MONTH, bin2bcd(tm->tm_mon + 1)) | |
| | FIELD_PREP(AT91_RTC_DAY, bin2bcd(tm->tm_wday + 1)) | |
| | FIELD_PREP(AT91_RTC_DATE, bin2bcd(tm->tm_mday))); | |
| /* Restart Time/Calendar */ | |
| cr = at91_rtc_read(AT91_RTC_CR); | |
| at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_SECEV); | |
| at91_rtc_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM)); | |
| at91_rtc_write_ier(AT91_RTC_SECEV); | |
| return 0; | |
| } | |
| /* | |
| * Read alarm time and date in RTC | |
| */ | |
| static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct rtc_time *tm = &alrm->time; | |
| at91_rtc_decodetime(AT91_RTC_TIMALR, AT91_RTC_CALALR, tm); | |
| tm->tm_year = -1; | |
| alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM) | |
| ? 1 : 0; | |
| dev_dbg(dev, "%s(): %ptR %sabled\n", __func__, tm, | |
| alrm->enabled ? "en" : "dis"); | |
| return 0; | |
| } | |
| /* | |
| * Set alarm time and date in RTC | |
| */ | |
| static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct rtc_time tm = alrm->time; | |
| at91_rtc_write_idr(AT91_RTC_ALARM); | |
| at91_rtc_write(AT91_RTC_TIMALR, | |
| FIELD_PREP(AT91_RTC_SEC, bin2bcd(alrm->time.tm_sec)) | |
| | FIELD_PREP(AT91_RTC_MIN, bin2bcd(alrm->time.tm_min)) | |
| | FIELD_PREP(AT91_RTC_HOUR, bin2bcd(alrm->time.tm_hour)) | |
| | AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN); | |
| at91_rtc_write(AT91_RTC_CALALR, | |
| FIELD_PREP(AT91_RTC_MONTH, bin2bcd(alrm->time.tm_mon + 1)) | |
| | FIELD_PREP(AT91_RTC_DATE, bin2bcd(alrm->time.tm_mday)) | |
| | AT91_RTC_DATEEN | AT91_RTC_MTHEN); | |
| if (alrm->enabled) { | |
| at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); | |
| at91_rtc_write_ier(AT91_RTC_ALARM); | |
| } | |
| dev_dbg(dev, "%s(): %ptR\n", __func__, &tm); | |
| return 0; | |
| } | |
| static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) | |
| { | |
| dev_dbg(dev, "%s(): cmd=%08x\n", __func__, enabled); | |
| if (enabled) { | |
| at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); | |
| at91_rtc_write_ier(AT91_RTC_ALARM); | |
| } else | |
| at91_rtc_write_idr(AT91_RTC_ALARM); | |
| return 0; | |
| } | |
| static int at91_rtc_readoffset(struct device *dev, long *offset) | |
| { | |
| u32 mr = at91_rtc_read(AT91_RTC_MR); | |
| long val = FIELD_GET(AT91_RTC_CORRECTION, mr); | |
| if (!val) { | |
| *offset = 0; | |
| return 0; | |
| } | |
| val++; | |
| if (!(mr & AT91_RTC_NEGPPM)) | |
| val = -val; | |
| if (!(mr & AT91_RTC_HIGHPPM)) | |
| val *= AT91_RTC_CORR_LOW_RATIO; | |
| *offset = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, val); | |
| return 0; | |
| } | |
| static int at91_rtc_setoffset(struct device *dev, long offset) | |
| { | |
| long corr; | |
| u32 mr; | |
| if (offset > AT91_RTC_CORR_DIVIDEND / 2) | |
| return -ERANGE; | |
| if (offset < -AT91_RTC_CORR_DIVIDEND / 2) | |
| return -ERANGE; | |
| mr = at91_rtc_read(AT91_RTC_MR); | |
| mr &= ~(AT91_RTC_NEGPPM | AT91_RTC_CORRECTION | AT91_RTC_HIGHPPM); | |
| if (offset > 0) | |
| mr |= AT91_RTC_NEGPPM; | |
| else | |
| offset = -offset; | |
| /* offset less than 764 ppb, disable correction*/ | |
| if (offset < 764) { | |
| at91_rtc_write(AT91_RTC_MR, mr & ~AT91_RTC_NEGPPM); | |
| return 0; | |
| } | |
| /* | |
| * 29208 ppb is the perfect cutoff between low range and high range | |
| * low range values are never better than high range value after that. | |
| */ | |
| if (offset < 29208) { | |
| corr = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, offset * AT91_RTC_CORR_LOW_RATIO); | |
| } else { | |
| corr = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, offset); | |
| mr |= AT91_RTC_HIGHPPM; | |
| } | |
| if (corr > 128) | |
| corr = 128; | |
| mr |= FIELD_PREP(AT91_RTC_CORRECTION, corr - 1); | |
| at91_rtc_write(AT91_RTC_MR, mr); | |
| return 0; | |
| } | |
| /* | |
| * IRQ handler for the RTC | |
| */ | |
| static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) | |
| { | |
| struct platform_device *pdev = dev_id; | |
| struct rtc_device *rtc = platform_get_drvdata(pdev); | |
| unsigned int rtsr; | |
| unsigned long events = 0; | |
| int ret = IRQ_NONE; | |
| spin_lock(&suspended_lock); | |
| rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read_imr(); | |
| if (rtsr) { /* this interrupt is shared! Is it ours? */ | |
| if (rtsr & AT91_RTC_ALARM) | |
| events |= (RTC_AF | RTC_IRQF); | |
| if (rtsr & AT91_RTC_SECEV) { | |
| complete(&at91_rtc_upd_rdy); | |
| at91_rtc_write_idr(AT91_RTC_SECEV); | |
| } | |
| if (rtsr & AT91_RTC_ACKUPD) | |
| complete(&at91_rtc_updated); | |
| at91_rtc_write(AT91_RTC_SCCR, rtsr); /* clear status reg */ | |
| if (!suspended) { | |
| rtc_update_irq(rtc, 1, events); | |
| dev_dbg(&pdev->dev, "%s(): num=%ld, events=0x%02lx\n", | |
| __func__, events >> 8, events & 0x000000FF); | |
| } else { | |
| cached_events |= events; | |
| at91_rtc_write_idr(at91_rtc_imr); | |
| pm_system_wakeup(); | |
| } | |
| ret = IRQ_HANDLED; | |
| } | |
| spin_unlock(&suspended_lock); | |
| return ret; | |
| } | |
| static const struct at91_rtc_config at91rm9200_config = { | |
| }; | |
| static const struct at91_rtc_config at91sam9x5_config = { | |
| .use_shadow_imr = true, | |
| }; | |
| static const struct at91_rtc_config sama5d4_config = { | |
| .has_correction = true, | |
| }; | |
| static const struct of_device_id at91_rtc_dt_ids[] = { | |
| { | |
| .compatible = "atmel,at91rm9200-rtc", | |
| .data = &at91rm9200_config, | |
| }, { | |
| .compatible = "atmel,at91sam9x5-rtc", | |
| .data = &at91sam9x5_config, | |
| }, { | |
| .compatible = "atmel,sama5d4-rtc", | |
| .data = &sama5d4_config, | |
| }, { | |
| .compatible = "atmel,sama5d2-rtc", | |
| .data = &sama5d4_config, | |
| }, { | |
| .compatible = "microchip,sam9x60-rtc", | |
| .data = &sama5d4_config, | |
| }, { | |
| /* sentinel */ | |
| } | |
| }; | |
| MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids); | |
| static const struct rtc_class_ops at91_rtc_ops = { | |
| .read_time = at91_rtc_readtime, | |
| .set_time = at91_rtc_settime, | |
| .read_alarm = at91_rtc_readalarm, | |
| .set_alarm = at91_rtc_setalarm, | |
| .alarm_irq_enable = at91_rtc_alarm_irq_enable, | |
| }; | |
| static const struct rtc_class_ops sama5d4_rtc_ops = { | |
| .read_time = at91_rtc_readtime, | |
| .set_time = at91_rtc_settime, | |
| .read_alarm = at91_rtc_readalarm, | |
| .set_alarm = at91_rtc_setalarm, | |
| .alarm_irq_enable = at91_rtc_alarm_irq_enable, | |
| .set_offset = at91_rtc_setoffset, | |
| .read_offset = at91_rtc_readoffset, | |
| }; | |
| /* | |
| * Initialize and install RTC driver | |
| */ | |
| static int __init at91_rtc_probe(struct platform_device *pdev) | |
| { | |
| struct rtc_device *rtc; | |
| struct resource *regs; | |
| int ret = 0; | |
| at91_rtc_config = of_device_get_match_data(&pdev->dev); | |
| if (!at91_rtc_config) | |
| return -ENODEV; | |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!regs) { | |
| dev_err(&pdev->dev, "no mmio resource defined\n"); | |
| return -ENXIO; | |
| } | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) | |
| return -ENXIO; | |
| at91_rtc_regs = devm_ioremap(&pdev->dev, regs->start, | |
| resource_size(regs)); | |
| if (!at91_rtc_regs) { | |
| dev_err(&pdev->dev, "failed to map registers, aborting.\n"); | |
| return -ENOMEM; | |
| } | |
| rtc = devm_rtc_allocate_device(&pdev->dev); | |
| if (IS_ERR(rtc)) | |
| return PTR_ERR(rtc); | |
| platform_set_drvdata(pdev, rtc); | |
| sclk = devm_clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(sclk)) | |
| return PTR_ERR(sclk); | |
| ret = clk_prepare_enable(sclk); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Could not enable slow clock\n"); | |
| return ret; | |
| } | |
| at91_rtc_write(AT91_RTC_CR, 0); | |
| at91_rtc_write(AT91_RTC_MR, at91_rtc_read(AT91_RTC_MR) & ~AT91_RTC_HRMOD); | |
| /* Disable all interrupts */ | |
| at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | | |
| AT91_RTC_SECEV | AT91_RTC_TIMEV | | |
| AT91_RTC_CALEV); | |
| ret = devm_request_irq(&pdev->dev, irq, at91_rtc_interrupt, | |
| IRQF_SHARED | IRQF_COND_SUSPEND, | |
| "at91_rtc", pdev); | |
| if (ret) { | |
| dev_err(&pdev->dev, "IRQ %d already in use.\n", irq); | |
| goto err_clk; | |
| } | |
| /* cpu init code should really have flagged this device as | |
| * being wake-capable; if it didn't, do that here. | |
| */ | |
| if (!device_can_wakeup(&pdev->dev)) | |
| device_init_wakeup(&pdev->dev, true); | |
| if (at91_rtc_config->has_correction) | |
| rtc->ops = &sama5d4_rtc_ops; | |
| else | |
| rtc->ops = &at91_rtc_ops; | |
| rtc->range_min = RTC_TIMESTAMP_BEGIN_1900; | |
| rtc->range_max = RTC_TIMESTAMP_END_2099; | |
| ret = devm_rtc_register_device(rtc); | |
| if (ret) | |
| goto err_clk; | |
| /* enable SECEV interrupt in order to initialize at91_rtc_upd_rdy | |
| * completion. | |
| */ | |
| at91_rtc_write_ier(AT91_RTC_SECEV); | |
| dev_info(&pdev->dev, "AT91 Real Time Clock driver.\n"); | |
| return 0; | |
| err_clk: | |
| clk_disable_unprepare(sclk); | |
| return ret; | |
| } | |
| /* | |
| * Disable and remove the RTC driver | |
| */ | |
| static void __exit at91_rtc_remove(struct platform_device *pdev) | |
| { | |
| /* Disable all interrupts */ | |
| at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | | |
| AT91_RTC_SECEV | AT91_RTC_TIMEV | | |
| AT91_RTC_CALEV); | |
| clk_disable_unprepare(sclk); | |
| } | |
| static void at91_rtc_shutdown(struct platform_device *pdev) | |
| { | |
| /* Disable all interrupts */ | |
| at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | | |
| AT91_RTC_SECEV | AT91_RTC_TIMEV | | |
| AT91_RTC_CALEV); | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| /* AT91RM9200 RTC Power management control */ | |
| static int at91_rtc_suspend(struct device *dev) | |
| { | |
| /* this IRQ is shared with DBGU and other hardware which isn't | |
| * necessarily doing PM like we are... | |
| */ | |
| at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); | |
| at91_rtc_imr = at91_rtc_read_imr() | |
| & (AT91_RTC_ALARM|AT91_RTC_SECEV); | |
| if (at91_rtc_imr) { | |
| if (device_may_wakeup(dev)) { | |
| unsigned long flags; | |
| enable_irq_wake(irq); | |
| spin_lock_irqsave(&suspended_lock, flags); | |
| suspended = true; | |
| spin_unlock_irqrestore(&suspended_lock, flags); | |
| } else { | |
| at91_rtc_write_idr(at91_rtc_imr); | |
| } | |
| } | |
| return 0; | |
| } | |
| static int at91_rtc_resume(struct device *dev) | |
| { | |
| struct rtc_device *rtc = dev_get_drvdata(dev); | |
| if (at91_rtc_imr) { | |
| if (device_may_wakeup(dev)) { | |
| unsigned long flags; | |
| spin_lock_irqsave(&suspended_lock, flags); | |
| if (cached_events) { | |
| rtc_update_irq(rtc, 1, cached_events); | |
| cached_events = 0; | |
| } | |
| suspended = false; | |
| spin_unlock_irqrestore(&suspended_lock, flags); | |
| disable_irq_wake(irq); | |
| } | |
| at91_rtc_write_ier(at91_rtc_imr); | |
| } | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); | |
| /* | |
| * at91_rtc_remove() lives in .exit.text. For drivers registered via | |
| * module_platform_driver_probe() this is ok because they cannot get unbound at | |
| * runtime. So mark the driver struct with __refdata to prevent modpost | |
| * triggering a section mismatch warning. | |
| */ | |
| static struct platform_driver at91_rtc_driver __refdata = { | |
| .remove = __exit_p(at91_rtc_remove), | |
| .shutdown = at91_rtc_shutdown, | |
| .driver = { | |
| .name = "at91_rtc", | |
| .pm = &at91_rtc_pm_ops, | |
| .of_match_table = at91_rtc_dt_ids, | |
| }, | |
| }; | |
| module_platform_driver_probe(at91_rtc_driver, at91_rtc_probe); | |
| MODULE_AUTHOR("Rick Bronson"); | |
| MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200"); | |
| MODULE_LICENSE("GPL"); |