| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Interface handling | |
| * | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz> | |
| * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | |
| * Copyright 2013-2014 Intel Mobile Communications GmbH | |
| * Copyright (c) 2016 Intel Deutschland GmbH | |
| * Copyright (C) 2018-2026 Intel Corporation | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/kernel.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/kcov.h> | |
| #include <net/mac80211.h> | |
| #include <net/ieee80211_radiotap.h> | |
| #include "ieee80211_i.h" | |
| #include "sta_info.h" | |
| #include "debugfs_netdev.h" | |
| #include "mesh.h" | |
| #include "led.h" | |
| #include "driver-ops.h" | |
| #include "wme.h" | |
| #include "rate.h" | |
| /** | |
| * DOC: Interface list locking | |
| * | |
| * The interface list in each struct ieee80211_local is protected | |
| * three-fold: | |
| * | |
| * (1) modifications may only be done under the RTNL *and* wiphy mutex | |
| * *and* iflist_mtx | |
| * (2) modifications are done in an RCU manner so atomic readers | |
| * can traverse the list in RCU-safe blocks. | |
| * | |
| * As a consequence, reads (traversals) of the list can be protected | |
| * by either the RTNL, the wiphy mutex, the iflist_mtx or RCU. | |
| */ | |
| static void ieee80211_iface_work(struct wiphy *wiphy, struct wiphy_work *work); | |
| bool __ieee80211_recalc_txpower(struct ieee80211_link_data *link) | |
| { | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| int power; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(link->conf->chanctx_conf); | |
| if (!chanctx_conf) { | |
| rcu_read_unlock(); | |
| return false; | |
| } | |
| power = ieee80211_chandef_max_power(&chanctx_conf->def); | |
| rcu_read_unlock(); | |
| if (link->user_power_level != IEEE80211_UNSET_POWER_LEVEL) | |
| power = min(power, link->user_power_level); | |
| if (link->ap_power_level != IEEE80211_UNSET_POWER_LEVEL) | |
| power = min(power, link->ap_power_level); | |
| if (power != link->conf->txpower) { | |
| link->conf->txpower = power; | |
| return true; | |
| } | |
| return false; | |
| } | |
| void ieee80211_recalc_txpower(struct ieee80211_link_data *link, | |
| bool update_bss) | |
| { | |
| if (__ieee80211_recalc_txpower(link) || | |
| (update_bss && ieee80211_sdata_running(link->sdata))) | |
| ieee80211_link_info_change_notify(link->sdata, link, | |
| BSS_CHANGED_TXPOWER); | |
| } | |
| static u32 __ieee80211_idle_off(struct ieee80211_local *local) | |
| { | |
| if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE)) | |
| return 0; | |
| local->hw.conf.flags &= ~IEEE80211_CONF_IDLE; | |
| return IEEE80211_CONF_CHANGE_IDLE; | |
| } | |
| static u32 __ieee80211_idle_on(struct ieee80211_local *local) | |
| { | |
| if (local->hw.conf.flags & IEEE80211_CONF_IDLE) | |
| return 0; | |
| ieee80211_flush_queues(local, NULL, false); | |
| local->hw.conf.flags |= IEEE80211_CONF_IDLE; | |
| return IEEE80211_CONF_CHANGE_IDLE; | |
| } | |
| static u32 __ieee80211_recalc_idle(struct ieee80211_local *local, | |
| bool force_active) | |
| { | |
| bool working, scanning, active; | |
| unsigned int led_trig_start = 0, led_trig_stop = 0; | |
| struct ieee80211_sub_if_data *iter; | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| active = force_active || | |
| !list_empty(&local->chanctx_list) || | |
| local->monitors; | |
| working = !local->ops->remain_on_channel && | |
| !list_empty(&local->roc_list); | |
| list_for_each_entry(iter, &local->interfaces, list) { | |
| if (iter->vif.type == NL80211_IFTYPE_NAN && | |
| iter->u.nan.started) { | |
| working = true; | |
| break; | |
| } | |
| } | |
| scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) || | |
| test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning); | |
| if (working || scanning) | |
| led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK; | |
| else | |
| led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK; | |
| if (active) | |
| led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; | |
| else | |
| led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; | |
| ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop); | |
| if (working || scanning || active) | |
| return __ieee80211_idle_off(local); | |
| return __ieee80211_idle_on(local); | |
| } | |
| u32 ieee80211_idle_off(struct ieee80211_local *local) | |
| { | |
| return __ieee80211_recalc_idle(local, true); | |
| } | |
| void ieee80211_recalc_idle(struct ieee80211_local *local) | |
| { | |
| u32 change = __ieee80211_recalc_idle(local, false); | |
| if (change) | |
| ieee80211_hw_config(local, -1, change); | |
| } | |
| static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr, | |
| bool check_dup) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_sub_if_data *iter; | |
| u64 new, mask, tmp; | |
| u8 *m; | |
| int ret = 0; | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| if (is_zero_ether_addr(local->hw.wiphy->addr_mask)) | |
| return 0; | |
| m = addr; | |
| new = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | |
| ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | |
| ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | |
| m = local->hw.wiphy->addr_mask; | |
| mask = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | |
| ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | |
| ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | |
| if (!check_dup) | |
| return ret; | |
| list_for_each_entry(iter, &local->interfaces, list) { | |
| if (iter == sdata) | |
| continue; | |
| if (iter->vif.type == NL80211_IFTYPE_MONITOR && | |
| !(iter->u.mntr.flags & MONITOR_FLAG_ACTIVE)) | |
| continue; | |
| m = iter->vif.addr; | |
| tmp = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | |
| ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | |
| ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | |
| if ((new & ~mask) != (tmp & ~mask)) { | |
| ret = -EINVAL; | |
| break; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int ieee80211_can_powered_addr_change(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_roc_work *roc; | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_sub_if_data *scan_sdata; | |
| int ret = 0; | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| /* To be the most flexible here we want to only limit changing the | |
| * address if the specific interface is doing offchannel work or | |
| * scanning. | |
| */ | |
| if (netif_carrier_ok(sdata->dev)) | |
| return -EBUSY; | |
| /* if any stations are set known (so they know this vif too), reject */ | |
| if (sta_info_get_by_idx(sdata, 0)) | |
| return -EBUSY; | |
| /* First check no ROC work is happening on this iface */ | |
| list_for_each_entry(roc, &local->roc_list, list) { | |
| if (roc->sdata != sdata) | |
| continue; | |
| if (roc->started) { | |
| ret = -EBUSY; | |
| goto unlock; | |
| } | |
| } | |
| /* And if this iface is scanning */ | |
| if (local->scanning) { | |
| scan_sdata = rcu_dereference_protected(local->scan_sdata, | |
| lockdep_is_held(&local->hw.wiphy->mtx)); | |
| if (sdata == scan_sdata) | |
| ret = -EBUSY; | |
| } | |
| /* | |
| * More interface types could be added here but changing the | |
| * address while powered makes the most sense in client modes. | |
| */ | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| /* refuse while connecting */ | |
| if (sdata->u.mgd.auth_data || sdata->u.mgd.assoc_data) | |
| return -EBUSY; | |
| break; | |
| default: | |
| ret = -EOPNOTSUPP; | |
| } | |
| unlock: | |
| return ret; | |
| } | |
| static int _ieee80211_change_mac(struct ieee80211_sub_if_data *sdata, | |
| void *addr) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct sockaddr *sa = addr; | |
| bool check_dup = true; | |
| bool live = false; | |
| int ret; | |
| if (ieee80211_sdata_running(sdata)) { | |
| ret = ieee80211_can_powered_addr_change(sdata); | |
| if (ret) | |
| return ret; | |
| live = true; | |
| } | |
| if (sdata->vif.type == NL80211_IFTYPE_MONITOR && | |
| !(sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE)) | |
| check_dup = false; | |
| ret = ieee80211_verify_mac(sdata, sa->sa_data, check_dup); | |
| if (ret) | |
| return ret; | |
| if (live) | |
| drv_remove_interface(local, sdata); | |
| ret = eth_mac_addr(sdata->dev, sa); | |
| if (ret == 0) { | |
| memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN); | |
| ether_addr_copy(sdata->vif.bss_conf.addr, sdata->vif.addr); | |
| } | |
| /* Regardless of eth_mac_addr() return we still want to add the | |
| * interface back. This should not fail... | |
| */ | |
| if (live) | |
| WARN_ON(drv_add_interface(local, sdata)); | |
| return ret; | |
| } | |
| static int ieee80211_change_mac(struct net_device *dev, void *addr) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| /* | |
| * This happens during unregistration if there's a bond device | |
| * active (maybe other cases?) and we must get removed from it. | |
| * But we really don't care anymore if it's not registered now. | |
| */ | |
| if (!dev->ieee80211_ptr->registered) | |
| return 0; | |
| guard(wiphy)(local->hw.wiphy); | |
| return _ieee80211_change_mac(sdata, addr); | |
| } | |
| static inline int identical_mac_addr_allowed(int type1, int type2) | |
| { | |
| return type1 == NL80211_IFTYPE_MONITOR || | |
| type2 == NL80211_IFTYPE_MONITOR || | |
| type1 == NL80211_IFTYPE_P2P_DEVICE || | |
| type2 == NL80211_IFTYPE_P2P_DEVICE || | |
| (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) || | |
| (type1 == NL80211_IFTYPE_AP_VLAN && | |
| (type2 == NL80211_IFTYPE_AP || | |
| type2 == NL80211_IFTYPE_AP_VLAN)); | |
| } | |
| static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata, | |
| enum nl80211_iftype iftype) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_sub_if_data *nsdata; | |
| ASSERT_RTNL(); | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| /* we hold the RTNL here so can safely walk the list */ | |
| list_for_each_entry(nsdata, &local->interfaces, list) { | |
| if (nsdata != sdata && ieee80211_sdata_running(nsdata)) { | |
| struct ieee80211_link_data *link; | |
| /* | |
| * Only OCB and monitor mode may coexist | |
| */ | |
| if ((sdata->vif.type == NL80211_IFTYPE_OCB && | |
| nsdata->vif.type != NL80211_IFTYPE_MONITOR) || | |
| (sdata->vif.type != NL80211_IFTYPE_MONITOR && | |
| nsdata->vif.type == NL80211_IFTYPE_OCB)) | |
| return -EBUSY; | |
| /* | |
| * A NAN DATA interface is correlated to the NAN | |
| * (management) one | |
| */ | |
| if (iftype == NL80211_IFTYPE_NAN_DATA && | |
| nsdata->vif.type == NL80211_IFTYPE_NAN) { | |
| if (!nsdata->u.nan.started) | |
| return -EINVAL; | |
| rcu_assign_pointer(sdata->u.nan_data.nmi, nsdata); | |
| } | |
| /* | |
| * Allow only a single IBSS interface to be up at any | |
| * time. This is restricted because beacon distribution | |
| * cannot work properly if both are in the same IBSS. | |
| * | |
| * To remove this restriction we'd have to disallow them | |
| * from setting the same SSID on different IBSS interfaces | |
| * belonging to the same hardware. Then, however, we're | |
| * faced with having to adopt two different TSF timers... | |
| */ | |
| if (iftype == NL80211_IFTYPE_ADHOC && | |
| nsdata->vif.type == NL80211_IFTYPE_ADHOC) | |
| return -EBUSY; | |
| /* | |
| * will not add another interface while any channel | |
| * switch is active. | |
| */ | |
| for_each_link_data(nsdata, link) { | |
| if (link->conf->csa_active) | |
| return -EBUSY; | |
| } | |
| /* | |
| * The remaining checks are only performed for interfaces | |
| * with the same MAC address. | |
| */ | |
| if (!ether_addr_equal(sdata->vif.addr, | |
| nsdata->vif.addr)) | |
| continue; | |
| /* | |
| * check whether it may have the same address | |
| */ | |
| if (!identical_mac_addr_allowed(iftype, | |
| nsdata->vif.type)) | |
| return -ENOTUNIQ; | |
| /* | |
| * can only add VLANs to enabled APs | |
| */ | |
| if (iftype == NL80211_IFTYPE_AP_VLAN && | |
| nsdata->vif.type == NL80211_IFTYPE_AP) | |
| sdata->bss = &nsdata->u.ap; | |
| } | |
| } | |
| return ieee80211_check_combinations(sdata, NULL, 0, 0, -1); | |
| } | |
| static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata, | |
| enum nl80211_iftype iftype) | |
| { | |
| int n_queues = sdata->local->hw.queues; | |
| int i; | |
| if (iftype == NL80211_IFTYPE_NAN) | |
| return 0; | |
| if (iftype != NL80211_IFTYPE_P2P_DEVICE) { | |
| for (i = 0; i < IEEE80211_NUM_ACS; i++) { | |
| if (WARN_ON_ONCE(sdata->vif.hw_queue[i] == | |
| IEEE80211_INVAL_HW_QUEUE)) | |
| return -EINVAL; | |
| if (WARN_ON_ONCE(sdata->vif.hw_queue[i] >= | |
| n_queues)) | |
| return -EINVAL; | |
| } | |
| } | |
| if ((iftype != NL80211_IFTYPE_AP && | |
| iftype != NL80211_IFTYPE_P2P_GO && | |
| iftype != NL80211_IFTYPE_MESH_POINT) || | |
| !ieee80211_hw_check(&sdata->local->hw, QUEUE_CONTROL)) { | |
| sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE; | |
| return 0; | |
| } | |
| if (WARN_ON_ONCE(sdata->vif.cab_queue == IEEE80211_INVAL_HW_QUEUE)) | |
| return -EINVAL; | |
| if (WARN_ON_ONCE(sdata->vif.cab_queue >= n_queues)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int ieee80211_open(struct net_device *dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| int err; | |
| /* fail early if user set an invalid address */ | |
| if (!is_valid_ether_addr(dev->dev_addr)) | |
| return -EADDRNOTAVAIL; | |
| guard(wiphy)(sdata->local->hw.wiphy); | |
| err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type); | |
| if (err) | |
| return err; | |
| return ieee80211_do_open(&sdata->wdev, true); | |
| } | |
| static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, bool going_down) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_sub_if_data *iter; | |
| unsigned long flags; | |
| struct sk_buff_head freeq; | |
| struct sk_buff *skb, *tmp; | |
| u32 hw_reconf_flags = 0; | |
| int i, flushed; | |
| struct ps_data *ps; | |
| struct cfg80211_chan_def chandef; | |
| bool cancel_scan; | |
| struct cfg80211_nan_func *func; | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| clear_bit(SDATA_STATE_RUNNING, &sdata->state); | |
| synchronize_rcu(); /* flush _ieee80211_wake_txqs() */ | |
| cancel_scan = rcu_access_pointer(local->scan_sdata) == sdata; | |
| if (cancel_scan) | |
| ieee80211_scan_cancel(local); | |
| ieee80211_roc_purge(local, sdata); | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_STATION: | |
| ieee80211_mgd_stop(sdata); | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| ieee80211_ibss_stop(sdata); | |
| break; | |
| case NL80211_IFTYPE_MONITOR: | |
| list_del_rcu(&sdata->u.mntr.list); | |
| break; | |
| case NL80211_IFTYPE_AP_VLAN: | |
| ieee80211_apvlan_link_clear(sdata); | |
| break; | |
| default: | |
| break; | |
| } | |
| /* | |
| * Remove all stations associated with this interface. | |
| * | |
| * This must be done before calling ops->remove_interface() | |
| * because otherwise we can later invoke ops->sta_notify() | |
| * whenever the STAs are removed, and that invalidates driver | |
| * assumptions about always getting a vif pointer that is valid | |
| * (because if we remove a STA after ops->remove_interface() | |
| * the driver will have removed the vif info already!) | |
| * | |
| * For AP_VLANs, NAN and NAN_DATA stations may exist since there's | |
| * nothing else that would have removed them, but in other modes there | |
| * shouldn't be any stations. | |
| */ | |
| flushed = sta_info_flush(sdata, -1); | |
| WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | |
| sdata->vif.type != NL80211_IFTYPE_NAN && | |
| sdata->vif.type != NL80211_IFTYPE_NAN_DATA && flushed > 0); | |
| /* don't count this interface for allmulti while it is down */ | |
| if (sdata->flags & IEEE80211_SDATA_ALLMULTI) | |
| atomic_dec(&local->iff_allmultis); | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { | |
| local->fif_pspoll--; | |
| local->fif_probe_req--; | |
| } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | |
| local->fif_probe_req--; | |
| } | |
| if (sdata->dev) { | |
| netif_addr_lock_bh(sdata->dev); | |
| spin_lock_bh(&local->filter_lock); | |
| __hw_addr_unsync(&local->mc_list, &sdata->dev->mc, | |
| sdata->dev->addr_len); | |
| spin_unlock_bh(&local->filter_lock); | |
| netif_addr_unlock_bh(sdata->dev); | |
| } | |
| timer_delete_sync(&local->dynamic_ps_timer); | |
| wiphy_work_cancel(local->hw.wiphy, &local->dynamic_ps_enable_work); | |
| WARN(ieee80211_vif_is_mld(&sdata->vif), | |
| "destroying interface with valid links 0x%04x\n", | |
| sdata->vif.valid_links); | |
| sdata->vif.bss_conf.csa_active = false; | |
| if (sdata->vif.type == NL80211_IFTYPE_STATION) | |
| sdata->deflink.u.mgd.csa.waiting_bcn = false; | |
| ieee80211_vif_unblock_queues_csa(sdata); | |
| wiphy_work_cancel(local->hw.wiphy, &sdata->deflink.csa.finalize_work); | |
| wiphy_work_cancel(local->hw.wiphy, | |
| &sdata->deflink.color_change_finalize_work); | |
| wiphy_hrtimer_work_cancel(local->hw.wiphy, | |
| &sdata->deflink.dfs_cac_timer_work); | |
| if (sdata->wdev.links[0].cac_started) { | |
| chandef = sdata->vif.bss_conf.chanreq.oper; | |
| WARN_ON(local->suspended); | |
| ieee80211_link_release_channel(&sdata->deflink); | |
| cfg80211_cac_event(sdata->dev, &chandef, | |
| NL80211_RADAR_CAC_ABORTED, | |
| GFP_KERNEL, 0); | |
| } | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { | |
| WARN_ON(!list_empty(&sdata->u.ap.vlans)); | |
| } else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | |
| /* remove all packets in parent bc_buf pointing to this dev */ | |
| ps = &sdata->bss->ps; | |
| spin_lock_irqsave(&ps->bc_buf.lock, flags); | |
| skb_queue_walk_safe(&ps->bc_buf, skb, tmp) { | |
| if (skb->dev == sdata->dev) { | |
| __skb_unlink(skb, &ps->bc_buf); | |
| local->total_ps_buffered--; | |
| ieee80211_free_txskb(&local->hw, skb); | |
| } | |
| } | |
| spin_unlock_irqrestore(&ps->bc_buf.lock, flags); | |
| } | |
| if (going_down) | |
| local->open_count--; | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP_VLAN: | |
| list_del(&sdata->u.vlan.list); | |
| RCU_INIT_POINTER(sdata->vif.bss_conf.chanctx_conf, NULL); | |
| /* see comment in the default case below */ | |
| ieee80211_free_keys(sdata, true); | |
| /* no need to tell driver */ | |
| break; | |
| case NL80211_IFTYPE_MONITOR: | |
| local->monitors--; | |
| if (!(sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) && | |
| !ieee80211_hw_check(&local->hw, NO_VIRTUAL_MONITOR)) { | |
| local->virt_monitors--; | |
| if (local->virt_monitors == 0) { | |
| local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR; | |
| hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; | |
| } | |
| ieee80211_adjust_monitor_flags(sdata, -1); | |
| } | |
| break; | |
| case NL80211_IFTYPE_NAN: | |
| /* Check if any open NAN_DATA interfaces */ | |
| list_for_each_entry(iter, &local->interfaces, list) { | |
| WARN_ON(iter->vif.type == NL80211_IFTYPE_NAN_DATA && | |
| ieee80211_sdata_running(iter)); | |
| } | |
| /* clean all the functions */ | |
| if (!(local->hw.wiphy->nan_capa.flags & | |
| WIPHY_NAN_FLAGS_USERSPACE_DE)) { | |
| spin_lock_bh(&sdata->u.nan.de.func_lock); | |
| idr_for_each_entry(&sdata->u.nan.de.function_inst_ids, | |
| func, i) { | |
| idr_remove(&sdata->u.nan.de.function_inst_ids, i); | |
| cfg80211_free_nan_func(func); | |
| } | |
| idr_destroy(&sdata->u.nan.de.function_inst_ids); | |
| spin_unlock_bh(&sdata->u.nan.de.func_lock); | |
| } | |
| /* | |
| * Free the remaining keys that might be associated with the | |
| * NAN interface, e.g., IGTK and BIGTK used for Tx. | |
| */ | |
| ieee80211_free_keys(sdata, true); | |
| break; | |
| case NL80211_IFTYPE_NAN_DATA: | |
| RCU_INIT_POINTER(sdata->u.nan_data.nmi, NULL); | |
| fallthrough; | |
| default: | |
| wiphy_work_cancel(sdata->local->hw.wiphy, &sdata->work); | |
| /* | |
| * When we get here, the interface is marked down. | |
| * Free the remaining keys, if there are any | |
| * (which can happen in AP mode if userspace sets | |
| * keys before the interface is operating) | |
| * | |
| * Force the key freeing to always synchronize_net() | |
| * to wait for the RX path in case it is using this | |
| * interface enqueuing frames at this very time on | |
| * another CPU. | |
| */ | |
| ieee80211_free_keys(sdata, true); | |
| skb_queue_purge(&sdata->skb_queue); | |
| skb_queue_purge(&sdata->status_queue); | |
| } | |
| /* | |
| * Since ieee80211_free_txskb() may issue __dev_queue_xmit() | |
| * which should be called with interrupts enabled, reclamation | |
| * is done in two phases: | |
| */ | |
| __skb_queue_head_init(&freeq); | |
| /* unlink from local queues... */ | |
| spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | |
| for (i = 0; i < IEEE80211_MAX_QUEUES; i++) { | |
| skb_queue_walk_safe(&local->pending[i], skb, tmp) { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| if (info->control.vif == &sdata->vif) { | |
| __skb_unlink(skb, &local->pending[i]); | |
| __skb_queue_tail(&freeq, skb); | |
| } | |
| } | |
| } | |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | |
| /* ... and perform actual reclamation with interrupts enabled. */ | |
| skb_queue_walk_safe(&freeq, skb, tmp) { | |
| __skb_unlink(skb, &freeq); | |
| ieee80211_free_txskb(&local->hw, skb); | |
| } | |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| ieee80211_txq_remove_vlan(local, sdata); | |
| if (sdata->vif.txq) | |
| ieee80211_txq_purge(sdata->local, to_txq_info(sdata->vif.txq)); | |
| if (sdata->vif.txq_mgmt) | |
| ieee80211_txq_purge(sdata->local, | |
| to_txq_info(sdata->vif.txq_mgmt)); | |
| sdata->bss = NULL; | |
| if (local->open_count == 0) | |
| ieee80211_clear_tx_pending(local); | |
| sdata->vif.bss_conf.beacon_int = 0; | |
| /* | |
| * If the interface goes down while suspended, presumably because | |
| * the device was unplugged and that happens before our resume, | |
| * then the driver is already unconfigured and the remainder of | |
| * this function isn't needed. | |
| * XXX: what about WoWLAN? If the device has software state, e.g. | |
| * memory allocated, it might expect teardown commands from | |
| * mac80211 here? | |
| */ | |
| if (local->suspended) { | |
| WARN_ON(local->wowlan); | |
| WARN_ON(rcu_access_pointer(local->monitor_sdata)); | |
| return; | |
| } | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP_VLAN: | |
| break; | |
| case NL80211_IFTYPE_MONITOR: | |
| if (local->virt_monitors == 0) | |
| ieee80211_del_virtual_monitor(local); | |
| ieee80211_recalc_idle(local); | |
| ieee80211_recalc_offload(local); | |
| if (!(sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) && | |
| !ieee80211_hw_check(&local->hw, NO_VIRTUAL_MONITOR)) | |
| break; | |
| ieee80211_link_release_channel(&sdata->deflink); | |
| fallthrough; | |
| default: | |
| if (!going_down) | |
| break; | |
| drv_remove_interface(local, sdata); | |
| /* Clear private driver data to prevent reuse */ | |
| memset(sdata->vif.drv_priv, 0, local->hw.vif_data_size); | |
| } | |
| ieee80211_recalc_ps(local); | |
| if (cancel_scan) | |
| wiphy_delayed_work_flush(local->hw.wiphy, &local->scan_work); | |
| if (local->open_count == 0) { | |
| ieee80211_stop_device(local, false); | |
| /* no reconfiguring after stop! */ | |
| return; | |
| } | |
| /* do after stop to avoid reconfiguring when we stop anyway */ | |
| ieee80211_configure_filter(local); | |
| ieee80211_hw_config(local, -1, hw_reconf_flags); | |
| /* Passing NULL means an interface is picked for configuration */ | |
| if (local->virt_monitors == local->open_count) | |
| ieee80211_add_virtual_monitor(local, NULL); | |
| } | |
| void ieee80211_stop_mbssid(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_sub_if_data *tx_sdata; | |
| struct ieee80211_bss_conf *link_conf, *tx_bss_conf; | |
| struct ieee80211_link_data *tx_link, *link; | |
| unsigned int link_id; | |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); | |
| /* Check if any of the links of current sdata is an MBSSID. */ | |
| for_each_vif_active_link(&sdata->vif, link_conf, link_id) { | |
| tx_bss_conf = sdata_dereference(link_conf->tx_bss_conf, sdata); | |
| if (!tx_bss_conf) | |
| continue; | |
| tx_sdata = vif_to_sdata(tx_bss_conf->vif); | |
| RCU_INIT_POINTER(link_conf->tx_bss_conf, NULL); | |
| /* If we are not tx sdata reset tx sdata's tx_bss_conf to avoid recusrion | |
| * while closing tx sdata at the end of outer loop below. | |
| */ | |
| if (sdata != tx_sdata) { | |
| tx_link = sdata_dereference(tx_sdata->link[tx_bss_conf->link_id], | |
| tx_sdata); | |
| if (!tx_link) | |
| continue; | |
| RCU_INIT_POINTER(tx_link->conf->tx_bss_conf, NULL); | |
| } | |
| /* loop through sdatas to find if any of their links | |
| * belong to same MBSSID set as the one getting deleted. | |
| */ | |
| for_each_sdata_link(tx_sdata->local, link) { | |
| struct ieee80211_sub_if_data *link_sdata = link->sdata; | |
| if (link_sdata == sdata || link_sdata == tx_sdata || | |
| rcu_access_pointer(link->conf->tx_bss_conf) != tx_bss_conf) | |
| continue; | |
| RCU_INIT_POINTER(link->conf->tx_bss_conf, NULL); | |
| /* Remove all links of matching MLD until dynamic link | |
| * removal can be supported. | |
| */ | |
| cfg80211_stop_iface(link_sdata->wdev.wiphy, &link_sdata->wdev, | |
| GFP_KERNEL); | |
| } | |
| /* If we are not tx sdata, remove links of tx sdata and proceed */ | |
| if (sdata != tx_sdata && ieee80211_sdata_running(tx_sdata)) | |
| cfg80211_stop_iface(tx_sdata->wdev.wiphy, | |
| &tx_sdata->wdev, GFP_KERNEL); | |
| } | |
| } | |
| static int ieee80211_stop(struct net_device *dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| /* close dependent VLAN interfaces before locking wiphy */ | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { | |
| struct ieee80211_sub_if_data *vlan, *tmpsdata; | |
| list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans, | |
| u.vlan.list) | |
| dev_close(vlan->dev); | |
| } | |
| guard(wiphy)(sdata->local->hw.wiphy); | |
| wiphy_work_cancel(sdata->local->hw.wiphy, &sdata->activate_links_work); | |
| /* Close the dependent MBSSID interfaces with wiphy lock as we may be | |
| * terminating its partner links too in case of MLD. | |
| */ | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) | |
| ieee80211_stop_mbssid(sdata); | |
| ieee80211_do_stop(sdata, true); | |
| return 0; | |
| } | |
| static void ieee80211_set_multicast_list(struct net_device *dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| int allmulti, sdata_allmulti; | |
| allmulti = !!(dev->flags & IFF_ALLMULTI); | |
| sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI); | |
| if (allmulti != sdata_allmulti) { | |
| if (dev->flags & IFF_ALLMULTI) | |
| atomic_inc(&local->iff_allmultis); | |
| else | |
| atomic_dec(&local->iff_allmultis); | |
| sdata->flags ^= IEEE80211_SDATA_ALLMULTI; | |
| } | |
| spin_lock_bh(&local->filter_lock); | |
| __hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len); | |
| spin_unlock_bh(&local->filter_lock); | |
| wiphy_work_queue(local->hw.wiphy, &local->reconfig_filter); | |
| } | |
| /* | |
| * Called when the netdev is removed or, by the code below, before | |
| * the interface type changes. | |
| */ | |
| static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata) | |
| { | |
| if (WARN_ON(!list_empty(&sdata->work.entry))) | |
| wiphy_work_cancel(sdata->local->hw.wiphy, &sdata->work); | |
| /* free extra data */ | |
| ieee80211_free_keys(sdata, false); | |
| ieee80211_debugfs_remove_netdev(sdata); | |
| ieee80211_destroy_frag_cache(&sdata->frags); | |
| if (ieee80211_vif_is_mesh(&sdata->vif)) | |
| ieee80211_mesh_teardown_sdata(sdata); | |
| ieee80211_vif_clear_links(sdata); | |
| ieee80211_link_stop(&sdata->deflink); | |
| if (sdata->vif.type == NL80211_IFTYPE_NAN) { | |
| struct ieee80211_nan_sched_cfg *nan_sched = | |
| &sdata->vif.cfg.nan_sched; | |
| for (int i = 0; i < ARRAY_SIZE(nan_sched->channels); i++) | |
| WARN_ON(nan_sched->channels[i].chanreq.oper.chan); | |
| } | |
| } | |
| static void ieee80211_uninit(struct net_device *dev) | |
| { | |
| ieee80211_teardown_sdata(IEEE80211_DEV_TO_SUB_IF(dev)); | |
| } | |
| static int ieee80211_netdev_setup_tc(struct net_device *dev, | |
| enum tc_setup_type type, void *type_data) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| return drv_net_setup_tc(local, sdata, dev, type, type_data); | |
| } | |
| static const struct net_device_ops ieee80211_dataif_ops = { | |
| .ndo_open = ieee80211_open, | |
| .ndo_stop = ieee80211_stop, | |
| .ndo_uninit = ieee80211_uninit, | |
| .ndo_start_xmit = ieee80211_subif_start_xmit, | |
| .ndo_set_rx_mode = ieee80211_set_multicast_list, | |
| .ndo_set_mac_address = ieee80211_change_mac, | |
| .ndo_setup_tc = ieee80211_netdev_setup_tc, | |
| }; | |
| static u16 ieee80211_monitor_select_queue(struct net_device *dev, | |
| struct sk_buff *skb, | |
| struct net_device *sb_dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr; | |
| int len_rthdr; | |
| if (local->hw.queues < IEEE80211_NUM_ACS) | |
| return 0; | |
| /* reset flags and info before parsing radiotap header */ | |
| memset(info, 0, sizeof(*info)); | |
| if (!ieee80211_parse_tx_radiotap(skb, dev)) | |
| return 0; /* doesn't matter, frame will be dropped */ | |
| len_rthdr = ieee80211_get_radiotap_len(skb->data); | |
| hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr); | |
| if (skb->len < len_rthdr + 2 || | |
| skb->len < len_rthdr + ieee80211_hdrlen(hdr->frame_control)) | |
| return 0; /* doesn't matter, frame will be dropped */ | |
| return ieee80211_select_queue_80211(sdata, skb, hdr); | |
| } | |
| static const struct net_device_ops ieee80211_monitorif_ops = { | |
| .ndo_open = ieee80211_open, | |
| .ndo_stop = ieee80211_stop, | |
| .ndo_uninit = ieee80211_uninit, | |
| .ndo_start_xmit = ieee80211_monitor_start_xmit, | |
| .ndo_set_rx_mode = ieee80211_set_multicast_list, | |
| .ndo_set_mac_address = ieee80211_change_mac, | |
| .ndo_select_queue = ieee80211_monitor_select_queue, | |
| }; | |
| static int ieee80211_netdev_fill_forward_path(struct net_device_path_ctx *ctx, | |
| struct net_device_path *path) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_local *local; | |
| struct sta_info *sta; | |
| int ret = -ENOENT; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(ctx->dev); | |
| local = sdata->local; | |
| if (!local->ops->net_fill_forward_path) | |
| return -EOPNOTSUPP; | |
| rcu_read_lock(); | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP_VLAN: | |
| sta = rcu_dereference(sdata->u.vlan.sta); | |
| if (sta) | |
| break; | |
| if (sdata->wdev.use_4addr) | |
| goto out; | |
| if (is_multicast_ether_addr(ctx->daddr)) | |
| goto out; | |
| sta = sta_info_get_bss(sdata, ctx->daddr); | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| if (is_multicast_ether_addr(ctx->daddr)) | |
| goto out; | |
| sta = sta_info_get(sdata, ctx->daddr); | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) { | |
| sta = sta_info_get(sdata, ctx->daddr); | |
| if (sta && test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | |
| if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH)) | |
| goto out; | |
| break; | |
| } | |
| } | |
| sta = sta_info_get(sdata, sdata->deflink.u.mgd.bssid); | |
| break; | |
| default: | |
| goto out; | |
| } | |
| if (!sta) | |
| goto out; | |
| ret = drv_net_fill_forward_path(local, sdata, &sta->sta, ctx, path); | |
| out: | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| static const struct net_device_ops ieee80211_dataif_8023_ops = { | |
| .ndo_open = ieee80211_open, | |
| .ndo_stop = ieee80211_stop, | |
| .ndo_uninit = ieee80211_uninit, | |
| .ndo_start_xmit = ieee80211_subif_start_xmit_8023, | |
| .ndo_set_rx_mode = ieee80211_set_multicast_list, | |
| .ndo_set_mac_address = ieee80211_change_mac, | |
| .ndo_fill_forward_path = ieee80211_netdev_fill_forward_path, | |
| .ndo_setup_tc = ieee80211_netdev_setup_tc, | |
| }; | |
| static bool ieee80211_iftype_supports_hdr_offload(enum nl80211_iftype iftype) | |
| { | |
| switch (iftype) { | |
| /* P2P GO and client are mapped to AP/STATION types */ | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_STATION: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static bool ieee80211_set_sdata_offload_flags(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| u32 flags; | |
| flags = sdata->vif.offload_flags; | |
| if (ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) && | |
| ieee80211_iftype_supports_hdr_offload(sdata->vif.type)) { | |
| flags |= IEEE80211_OFFLOAD_ENCAP_ENABLED; | |
| if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG) && | |
| local->hw.wiphy->frag_threshold != (u32)-1) | |
| flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED; | |
| if (local->virt_monitors) | |
| flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED; | |
| } else { | |
| flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED; | |
| } | |
| if (ieee80211_hw_check(&local->hw, SUPPORTS_RX_DECAP_OFFLOAD) && | |
| ieee80211_iftype_supports_hdr_offload(sdata->vif.type)) { | |
| flags |= IEEE80211_OFFLOAD_DECAP_ENABLED; | |
| if (local->virt_monitors && | |
| !ieee80211_hw_check(&local->hw, SUPPORTS_CONC_MON_RX_DECAP)) | |
| flags &= ~IEEE80211_OFFLOAD_DECAP_ENABLED; | |
| } else { | |
| flags &= ~IEEE80211_OFFLOAD_DECAP_ENABLED; | |
| } | |
| if (sdata->vif.offload_flags == flags) | |
| return false; | |
| sdata->vif.offload_flags = flags; | |
| ieee80211_check_fast_rx_iface(sdata); | |
| return true; | |
| } | |
| static void ieee80211_set_vif_encap_ops(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_sub_if_data *bss = sdata; | |
| bool enabled; | |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | |
| if (!sdata->bss) | |
| return; | |
| bss = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap); | |
| } | |
| if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) || | |
| !ieee80211_iftype_supports_hdr_offload(bss->vif.type)) | |
| return; | |
| enabled = bss->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_ENABLED; | |
| if (sdata->wdev.use_4addr && | |
| !(bss->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_4ADDR)) | |
| enabled = false; | |
| sdata->dev->netdev_ops = enabled ? &ieee80211_dataif_8023_ops : | |
| &ieee80211_dataif_ops; | |
| } | |
| static void ieee80211_recalc_sdata_offload(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_sub_if_data *vsdata; | |
| if (ieee80211_set_sdata_offload_flags(sdata)) { | |
| drv_update_vif_offload(local, sdata); | |
| ieee80211_set_vif_encap_ops(sdata); | |
| } | |
| list_for_each_entry(vsdata, &local->interfaces, list) { | |
| if (vsdata->vif.type != NL80211_IFTYPE_AP_VLAN || | |
| vsdata->bss != &sdata->u.ap) | |
| continue; | |
| ieee80211_set_vif_encap_ops(vsdata); | |
| } | |
| } | |
| void ieee80211_recalc_offload(struct ieee80211_local *local) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD)) | |
| return; | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| list_for_each_entry(sdata, &local->interfaces, list) { | |
| if (!ieee80211_sdata_running(sdata)) | |
| continue; | |
| ieee80211_recalc_sdata_offload(sdata); | |
| } | |
| } | |
| void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata, | |
| const int offset) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| u32 flags = sdata->u.mntr.flags; | |
| #define ADJUST(_f, _s) do { \ | |
| if (flags & MONITOR_FLAG_##_f) \ | |
| local->fif_##_s += offset; \ | |
| } while (0) | |
| ADJUST(FCSFAIL, fcsfail); | |
| ADJUST(PLCPFAIL, plcpfail); | |
| ADJUST(CONTROL, control); | |
| ADJUST(CONTROL, pspoll); | |
| ADJUST(OTHER_BSS, other_bss); | |
| if (!(flags & MONITOR_FLAG_SKIP_TX)) | |
| local->tx_mntrs += offset; | |
| #undef ADJUST | |
| } | |
| static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| int i; | |
| for (i = 0; i < IEEE80211_NUM_ACS; i++) { | |
| if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) | |
| sdata->vif.hw_queue[i] = IEEE80211_INVAL_HW_QUEUE; | |
| else if (local->hw.queues >= IEEE80211_NUM_ACS) | |
| sdata->vif.hw_queue[i] = i; | |
| else | |
| sdata->vif.hw_queue[i] = 0; | |
| } | |
| sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE; | |
| } | |
| static void ieee80211_sdata_init(struct ieee80211_local *local, | |
| struct ieee80211_sub_if_data *sdata) | |
| { | |
| sdata->local = local; | |
| INIT_LIST_HEAD(&sdata->key_list); | |
| /* | |
| * Initialize the default link, so we can use link_id 0 for non-MLD, | |
| * and that continues to work for non-MLD-aware drivers that use just | |
| * vif.bss_conf instead of vif.link_conf. | |
| * | |
| * Note that we never change this, so if link ID 0 isn't used in an | |
| * MLD connection, we get a separate allocation for it. | |
| */ | |
| ieee80211_link_init(sdata, -1, &sdata->deflink, &sdata->vif.bss_conf); | |
| } | |
| int ieee80211_add_virtual_monitor(struct ieee80211_local *local, | |
| struct ieee80211_sub_if_data *creator_sdata) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| int ret; | |
| ASSERT_RTNL(); | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| if (ieee80211_hw_check(&local->hw, NO_VIRTUAL_MONITOR)) | |
| return 0; | |
| /* Already have a monitor set up, configure it */ | |
| sdata = wiphy_dereference(local->hw.wiphy, local->monitor_sdata); | |
| if (sdata) | |
| goto configure_monitor; | |
| sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL); | |
| if (!sdata) | |
| return -ENOMEM; | |
| /* set up data */ | |
| sdata->vif.type = NL80211_IFTYPE_MONITOR; | |
| snprintf(sdata->name, IFNAMSIZ, "%s-monitor", | |
| wiphy_name(local->hw.wiphy)); | |
| sdata->wdev.iftype = NL80211_IFTYPE_MONITOR; | |
| sdata->wdev.wiphy = local->hw.wiphy; | |
| ieee80211_sdata_init(local, sdata); | |
| ieee80211_set_default_queues(sdata); | |
| if (ieee80211_hw_check(&local->hw, WANT_MONITOR_VIF)) { | |
| ret = drv_add_interface(local, sdata); | |
| if (WARN_ON(ret)) { | |
| /* ok .. stupid driver, it asked for this! */ | |
| kfree(sdata); | |
| return ret; | |
| } | |
| } | |
| ret = ieee80211_check_queues(sdata, NL80211_IFTYPE_MONITOR); | |
| if (ret) { | |
| kfree(sdata); | |
| return ret; | |
| } | |
| set_bit(SDATA_STATE_RUNNING, &sdata->state); | |
| mutex_lock(&local->iflist_mtx); | |
| rcu_assign_pointer(local->monitor_sdata, sdata); | |
| mutex_unlock(&local->iflist_mtx); | |
| ret = ieee80211_link_use_channel(&sdata->deflink, &local->monitor_chanreq, | |
| IEEE80211_CHANCTX_EXCLUSIVE); | |
| if (ret) { | |
| mutex_lock(&local->iflist_mtx); | |
| RCU_INIT_POINTER(local->monitor_sdata, NULL); | |
| mutex_unlock(&local->iflist_mtx); | |
| synchronize_net(); | |
| drv_remove_interface(local, sdata); | |
| clear_bit(SDATA_STATE_RUNNING, &sdata->state); | |
| kfree(sdata); | |
| return ret; | |
| } | |
| skb_queue_head_init(&sdata->skb_queue); | |
| skb_queue_head_init(&sdata->status_queue); | |
| wiphy_work_init(&sdata->work, ieee80211_iface_work); | |
| configure_monitor: | |
| /* Copy in the MU-MIMO configuration if set */ | |
| if (!creator_sdata) { | |
| struct ieee80211_sub_if_data *other; | |
| list_for_each_entry_rcu(other, &local->mon_list, u.mntr.list) { | |
| if (!other->vif.bss_conf.mu_mimo_owner) | |
| continue; | |
| creator_sdata = other; | |
| break; | |
| } | |
| } | |
| if (creator_sdata && creator_sdata->vif.bss_conf.mu_mimo_owner) { | |
| sdata->vif.bss_conf.mu_mimo_owner = true; | |
| memcpy(&sdata->vif.bss_conf.mu_group, | |
| &creator_sdata->vif.bss_conf.mu_group, | |
| sizeof(sdata->vif.bss_conf.mu_group)); | |
| memcpy(&sdata->u.mntr.mu_follow_addr, | |
| creator_sdata->u.mntr.mu_follow_addr, ETH_ALEN); | |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, | |
| BSS_CHANGED_MU_GROUPS); | |
| } | |
| return 0; | |
| } | |
| void ieee80211_del_virtual_monitor(struct ieee80211_local *local) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| if (ieee80211_hw_check(&local->hw, NO_VIRTUAL_MONITOR)) | |
| return; | |
| ASSERT_RTNL(); | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| mutex_lock(&local->iflist_mtx); | |
| sdata = rcu_dereference_protected(local->monitor_sdata, | |
| lockdep_is_held(&local->iflist_mtx)); | |
| if (!sdata) { | |
| mutex_unlock(&local->iflist_mtx); | |
| return; | |
| } | |
| clear_bit(SDATA_STATE_RUNNING, &sdata->state); | |
| ieee80211_link_release_channel(&sdata->deflink); | |
| if (ieee80211_hw_check(&local->hw, WANT_MONITOR_VIF)) | |
| drv_remove_interface(local, sdata); | |
| RCU_INIT_POINTER(local->monitor_sdata, NULL); | |
| mutex_unlock(&local->iflist_mtx); | |
| synchronize_net(); | |
| kfree(sdata); | |
| } | |
| /* | |
| * NOTE: Be very careful when changing this function, it must NOT return | |
| * an error on interface type changes that have been pre-checked, so most | |
| * checks should be in ieee80211_check_concurrent_iface. | |
| */ | |
| int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | |
| struct net_device *dev = wdev->netdev; | |
| struct ieee80211_local *local = sdata->local; | |
| u64 changed = 0; | |
| int res; | |
| u32 hw_reconf_flags = 0; | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP_VLAN: { | |
| struct ieee80211_sub_if_data *master; | |
| if (!sdata->bss) | |
| return -ENOLINK; | |
| list_add(&sdata->u.vlan.list, &sdata->bss->vlans); | |
| master = container_of(sdata->bss, | |
| struct ieee80211_sub_if_data, u.ap); | |
| sdata->control_port_protocol = | |
| master->control_port_protocol; | |
| sdata->control_port_no_encrypt = | |
| master->control_port_no_encrypt; | |
| sdata->control_port_over_nl80211 = | |
| master->control_port_over_nl80211; | |
| sdata->control_port_no_preauth = | |
| master->control_port_no_preauth; | |
| sdata->vif.cab_queue = master->vif.cab_queue; | |
| memcpy(sdata->vif.hw_queue, master->vif.hw_queue, | |
| sizeof(sdata->vif.hw_queue)); | |
| sdata->vif.bss_conf.chanreq = master->vif.bss_conf.chanreq; | |
| sdata->crypto_tx_tailroom_needed_cnt += | |
| master->crypto_tx_tailroom_needed_cnt; | |
| ieee80211_apvlan_link_setup(sdata); | |
| break; | |
| } | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_MESH_POINT: | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_MONITOR: | |
| case NL80211_IFTYPE_ADHOC: | |
| case NL80211_IFTYPE_P2P_DEVICE: | |
| case NL80211_IFTYPE_OCB: | |
| case NL80211_IFTYPE_NAN: | |
| case NL80211_IFTYPE_PD: | |
| /* no special treatment */ | |
| break; | |
| case NL80211_IFTYPE_NAN_DATA: | |
| if (WARN_ON(!rcu_access_pointer(sdata->u.nan_data.nmi))) | |
| return -ENOLINK; | |
| break; | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| case NUM_NL80211_IFTYPES: | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| case NL80211_IFTYPE_WDS: | |
| /* cannot happen */ | |
| WARN_ON(1); | |
| break; | |
| } | |
| if (local->open_count == 0) { | |
| /* here we can consider everything in good order (again) */ | |
| local->reconfig_failure = false; | |
| res = drv_start(local); | |
| if (res) { | |
| /* | |
| * no need to worry about AP_VLAN/NAN_DATA cleanup since | |
| * in that case we can't have open_count == 0 | |
| */ | |
| return res; | |
| } | |
| ieee80211_led_radio(local, true); | |
| ieee80211_mod_tpt_led_trig(local, | |
| IEEE80211_TPT_LEDTRIG_FL_RADIO, 0); | |
| } | |
| /* | |
| * Copy the hopefully now-present MAC address to | |
| * this interface, if it has the special null one. | |
| */ | |
| if (dev && is_zero_ether_addr(dev->dev_addr)) { | |
| eth_hw_addr_set(dev, local->hw.wiphy->perm_addr); | |
| memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); | |
| if (!is_valid_ether_addr(dev->dev_addr)) { | |
| res = -EADDRNOTAVAIL; | |
| goto err_stop; | |
| } | |
| } | |
| sdata->vif.addr_valid = sdata->vif.type != NL80211_IFTYPE_MONITOR || | |
| (sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE); | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP_VLAN: | |
| /* no need to tell driver, but set carrier and chanctx */ | |
| if (sdata->bss->active) { | |
| struct ieee80211_link_data *link; | |
| for_each_link_data(sdata, link) { | |
| ieee80211_link_vlan_copy_chanctx(link); | |
| } | |
| netif_carrier_on(dev); | |
| ieee80211_set_vif_encap_ops(sdata); | |
| } else { | |
| netif_carrier_off(dev); | |
| } | |
| break; | |
| case NL80211_IFTYPE_MONITOR: | |
| if ((sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) || | |
| ieee80211_hw_check(&local->hw, NO_VIRTUAL_MONITOR)) { | |
| res = drv_add_interface(local, sdata); | |
| if (res) | |
| goto err_stop; | |
| } else { | |
| /* add/configure if there is no non-monitor interface */ | |
| if (local->virt_monitors == local->open_count) { | |
| res = ieee80211_add_virtual_monitor(local, sdata); | |
| if (res) | |
| goto err_stop; | |
| } | |
| local->virt_monitors++; | |
| /* must be before the call to ieee80211_configure_filter */ | |
| if (local->virt_monitors == 1) { | |
| local->hw.conf.flags |= IEEE80211_CONF_MONITOR; | |
| hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; | |
| } | |
| } | |
| local->monitors++; | |
| ieee80211_adjust_monitor_flags(sdata, 1); | |
| ieee80211_configure_filter(local); | |
| ieee80211_recalc_offload(local); | |
| ieee80211_recalc_idle(local); | |
| netif_carrier_on(dev); | |
| list_add_tail_rcu(&sdata->u.mntr.list, &local->mon_list); | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| sdata->bss = &sdata->u.ap; | |
| fallthrough; | |
| default: | |
| if (coming_up) { | |
| ieee80211_del_virtual_monitor(local); | |
| ieee80211_set_sdata_offload_flags(sdata); | |
| res = drv_add_interface(local, sdata); | |
| if (res) | |
| goto err_stop; | |
| ieee80211_set_vif_encap_ops(sdata); | |
| res = ieee80211_check_queues(sdata, | |
| ieee80211_vif_type_p2p(&sdata->vif)); | |
| if (res) | |
| goto err_del_interface; | |
| } | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { | |
| local->fif_pspoll++; | |
| local->fif_probe_req++; | |
| ieee80211_configure_filter(local); | |
| } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | |
| local->fif_probe_req++; | |
| } | |
| if (sdata->vif.probe_req_reg) | |
| drv_config_iface_filter(local, sdata, | |
| FIF_PROBE_REQ, | |
| FIF_PROBE_REQ); | |
| if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE && | |
| sdata->vif.type != NL80211_IFTYPE_NAN && | |
| sdata->vif.type != NL80211_IFTYPE_PD) | |
| changed |= ieee80211_reset_erp_info(sdata); | |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, | |
| changed); | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_MESH_POINT: | |
| case NL80211_IFTYPE_OCB: | |
| case NL80211_IFTYPE_NAN_DATA: | |
| netif_carrier_off(dev); | |
| break; | |
| case NL80211_IFTYPE_P2P_DEVICE: | |
| case NL80211_IFTYPE_NAN: | |
| case NL80211_IFTYPE_PD: | |
| break; | |
| default: | |
| /* not reached */ | |
| WARN_ON(1); | |
| } | |
| /* | |
| * Set default queue parameters so drivers don't | |
| * need to initialise the hardware if the hardware | |
| * doesn't start up with sane defaults. | |
| * Enable QoS for anything but station interfaces. | |
| */ | |
| ieee80211_set_wmm_default(&sdata->deflink, true, | |
| sdata->vif.type != NL80211_IFTYPE_STATION); | |
| } | |
| /* | |
| * set_multicast_list will be invoked by the networking core | |
| * which will check whether any increments here were done in | |
| * error and sync them down to the hardware as filter flags. | |
| */ | |
| if (sdata->flags & IEEE80211_SDATA_ALLMULTI) | |
| atomic_inc(&local->iff_allmultis); | |
| if (coming_up) | |
| local->open_count++; | |
| if (local->open_count == 1) | |
| ieee80211_hw_conf_init(local); | |
| else if (hw_reconf_flags) | |
| ieee80211_hw_config(local, -1, hw_reconf_flags); | |
| ieee80211_recalc_ps(local); | |
| set_bit(SDATA_STATE_RUNNING, &sdata->state); | |
| return 0; | |
| err_del_interface: | |
| drv_remove_interface(local, sdata); | |
| err_stop: | |
| if (!local->open_count) | |
| drv_stop(local, false); | |
| if (sdata->vif.type == NL80211_IFTYPE_NAN_DATA) | |
| RCU_INIT_POINTER(sdata->u.nan_data.nmi, NULL); | |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| list_del(&sdata->u.vlan.list); | |
| /* Might not be initialized yet, but it is harmless */ | |
| sdata->bss = NULL; | |
| return res; | |
| } | |
| static void ieee80211_if_setup(struct net_device *dev) | |
| { | |
| ether_setup(dev); | |
| dev->priv_flags &= ~IFF_TX_SKB_SHARING; | |
| dev->priv_flags |= IFF_NO_QUEUE; | |
| dev->netdev_ops = &ieee80211_dataif_ops; | |
| dev->needs_free_netdev = true; | |
| } | |
| static void ieee80211_iface_process_skb(struct ieee80211_local *local, | |
| struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_mgmt *mgmt = (void *)skb->data; | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| if (ieee80211_is_action(mgmt->frame_control) && | |
| mgmt->u.action.category == WLAN_CATEGORY_BACK) { | |
| struct sta_info *sta; | |
| int len = skb->len; | |
| sta = sta_info_get_bss(sdata, mgmt->sa); | |
| if (sta) { | |
| switch (mgmt->u.action.action_code) { | |
| case WLAN_ACTION_ADDBA_REQ: | |
| case WLAN_ACTION_NDP_ADDBA_REQ: | |
| ieee80211_process_addba_request(local, sta, | |
| mgmt, len); | |
| break; | |
| case WLAN_ACTION_ADDBA_RESP: | |
| case WLAN_ACTION_NDP_ADDBA_RESP: | |
| ieee80211_process_addba_resp(local, sta, | |
| mgmt, len); | |
| break; | |
| case WLAN_ACTION_DELBA: | |
| case WLAN_ACTION_NDP_DELBA: | |
| ieee80211_process_delba(sdata, sta, | |
| mgmt, len); | |
| break; | |
| default: | |
| WARN_ON(1); | |
| break; | |
| } | |
| } | |
| } else if (ieee80211_is_action(mgmt->frame_control) && | |
| mgmt->u.action.category == WLAN_CATEGORY_HT) { | |
| switch (mgmt->u.action.action_code) { | |
| case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: { | |
| u8 chanwidth = mgmt->u.action.ht_notify_cw.chanwidth; | |
| struct ieee80211_rx_status *status; | |
| struct link_sta_info *link_sta; | |
| struct sta_info *sta; | |
| sta = sta_info_get_bss(sdata, mgmt->sa); | |
| if (!sta) | |
| break; | |
| status = IEEE80211_SKB_RXCB(skb); | |
| if (!status->link_valid) | |
| link_sta = &sta->deflink; | |
| else | |
| link_sta = rcu_dereference_protected(sta->link[status->link_id], | |
| lockdep_is_held(&local->hw.wiphy->mtx)); | |
| if (link_sta) | |
| ieee80211_ht_handle_chanwidth_notif(local, sdata, sta, | |
| link_sta, chanwidth, | |
| status->band); | |
| break; | |
| } | |
| default: | |
| WARN_ON(1); | |
| break; | |
| } | |
| } else if (ieee80211_is_action(mgmt->frame_control) && | |
| mgmt->u.action.category == WLAN_CATEGORY_VHT) { | |
| switch (mgmt->u.action.action_code) { | |
| case WLAN_VHT_ACTION_OPMODE_NOTIF: { | |
| struct ieee80211_rx_status *status; | |
| enum nl80211_band band; | |
| struct sta_info *sta; | |
| u8 opmode; | |
| status = IEEE80211_SKB_RXCB(skb); | |
| band = status->band; | |
| opmode = mgmt->u.action.vht_opmode_notif.operating_mode; | |
| sta = sta_info_get_bss(sdata, mgmt->sa); | |
| if (sta) | |
| ieee80211_vht_handle_opmode(sdata, | |
| &sta->deflink, | |
| opmode, band); | |
| break; | |
| } | |
| case WLAN_VHT_ACTION_GROUPID_MGMT: | |
| ieee80211_process_mu_groups(sdata, &sdata->deflink, | |
| mgmt); | |
| break; | |
| default: | |
| WARN_ON(1); | |
| break; | |
| } | |
| } else if (ieee80211_is_action(mgmt->frame_control) && | |
| mgmt->u.action.category == WLAN_CATEGORY_S1G) { | |
| switch (mgmt->u.action.action_code) { | |
| case WLAN_S1G_TWT_TEARDOWN: | |
| case WLAN_S1G_TWT_SETUP: | |
| ieee80211_s1g_rx_twt_action(sdata, skb); | |
| break; | |
| default: | |
| break; | |
| } | |
| } else if (ieee80211_is_data_qos(mgmt->frame_control)) { | |
| struct ieee80211_hdr *hdr = (void *)mgmt; | |
| struct sta_info *sta; | |
| /* | |
| * So the frame isn't mgmt, but frame_control | |
| * is at the right place anyway, of course, so | |
| * the if statement is correct. | |
| * | |
| * Warn if we have other data frame types here, | |
| * they must not get here. | |
| */ | |
| WARN_ON(hdr->frame_control & | |
| cpu_to_le16(IEEE80211_STYPE_NULLFUNC)); | |
| WARN_ON(!(hdr->seq_ctrl & | |
| cpu_to_le16(IEEE80211_SCTL_FRAG))); | |
| /* | |
| * This was a fragment of a frame, received while | |
| * a block-ack session was active. That cannot be | |
| * right, so terminate the session. | |
| */ | |
| sta = sta_info_get_bss(sdata, mgmt->sa); | |
| if (sta) { | |
| u16 tid = ieee80211_get_tid(hdr); | |
| __ieee80211_stop_rx_ba_session( | |
| sta, tid, WLAN_BACK_RECIPIENT, | |
| WLAN_REASON_QSTA_REQUIRE_SETUP, | |
| true); | |
| } | |
| } else switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP: | |
| ieee80211_ap_rx_queued_frame(sdata, skb); | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| ieee80211_sta_rx_queued_frame(sdata, skb); | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| ieee80211_ibss_rx_queued_mgmt(sdata, skb); | |
| break; | |
| case NL80211_IFTYPE_MESH_POINT: | |
| if (!ieee80211_vif_is_mesh(&sdata->vif)) | |
| break; | |
| ieee80211_mesh_rx_queued_mgmt(sdata, skb); | |
| break; | |
| default: | |
| WARN(1, "frame for unexpected interface type"); | |
| break; | |
| } | |
| } | |
| static void ieee80211_iface_process_status(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_mgmt *mgmt = (void *)skb->data; | |
| if (ieee80211_is_action(mgmt->frame_control) && | |
| mgmt->u.action.category == WLAN_CATEGORY_S1G) { | |
| switch (mgmt->u.action.action_code) { | |
| case WLAN_S1G_TWT_TEARDOWN: | |
| case WLAN_S1G_TWT_SETUP: | |
| ieee80211_s1g_status_twt_action(sdata, skb); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| } | |
| static void ieee80211_iface_work(struct wiphy *wiphy, struct wiphy_work *work) | |
| { | |
| struct ieee80211_sub_if_data *sdata = | |
| container_of(work, struct ieee80211_sub_if_data, work); | |
| struct ieee80211_local *local = sdata->local; | |
| struct sk_buff *skb; | |
| if (!ieee80211_sdata_running(sdata)) | |
| return; | |
| if (test_bit(SCAN_SW_SCANNING, &local->scanning)) | |
| return; | |
| if (!ieee80211_can_run_worker(local)) | |
| return; | |
| /* first process frames */ | |
| while ((skb = skb_dequeue(&sdata->skb_queue))) { | |
| kcov_remote_start_common(skb_get_kcov_handle(skb)); | |
| if (skb->protocol == cpu_to_be16(ETH_P_TDLS)) | |
| ieee80211_process_tdls_channel_switch(sdata, skb); | |
| else | |
| ieee80211_iface_process_skb(local, sdata, skb); | |
| consume_skb(skb); | |
| kcov_remote_stop(); | |
| } | |
| /* process status queue */ | |
| while ((skb = skb_dequeue(&sdata->status_queue))) { | |
| kcov_remote_start_common(skb_get_kcov_handle(skb)); | |
| ieee80211_iface_process_status(sdata, skb); | |
| consume_skb(skb); | |
| kcov_remote_stop(); | |
| } | |
| /* then other type-dependent work */ | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_STATION: | |
| ieee80211_sta_work(sdata); | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| ieee80211_ibss_work(sdata); | |
| break; | |
| case NL80211_IFTYPE_MESH_POINT: | |
| if (!ieee80211_vif_is_mesh(&sdata->vif)) | |
| break; | |
| ieee80211_mesh_work(sdata); | |
| break; | |
| case NL80211_IFTYPE_OCB: | |
| ieee80211_ocb_work(sdata); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void ieee80211_activate_links_work(struct wiphy *wiphy, | |
| struct wiphy_work *work) | |
| { | |
| struct ieee80211_sub_if_data *sdata = | |
| container_of(work, struct ieee80211_sub_if_data, | |
| activate_links_work); | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| if (local->in_reconfig) | |
| return; | |
| ieee80211_set_active_links(&sdata->vif, sdata->desired_active_links); | |
| sdata->desired_active_links = 0; | |
| } | |
| /* | |
| * Helper function to initialise an interface to a specific type. | |
| */ | |
| static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, | |
| enum nl80211_iftype type) | |
| { | |
| static const u8 bssid_wildcard[ETH_ALEN] = {0xff, 0xff, 0xff, | |
| 0xff, 0xff, 0xff}; | |
| /* clear type-dependent unions */ | |
| memset(&sdata->u, 0, sizeof(sdata->u)); | |
| memset(&sdata->deflink.u, 0, sizeof(sdata->deflink.u)); | |
| /* and set some type-dependent values */ | |
| sdata->vif.type = type; | |
| sdata->vif.p2p = false; | |
| sdata->wdev.iftype = type; | |
| sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE); | |
| sdata->control_port_no_encrypt = false; | |
| sdata->control_port_over_nl80211 = false; | |
| sdata->control_port_no_preauth = false; | |
| sdata->vif.cfg.idle = true; | |
| sdata->vif.bss_conf.txpower = INT_MIN; /* unset */ | |
| sdata->noack_map = 0; | |
| /* only monitor/p2p-device differ */ | |
| if (sdata->dev) { | |
| sdata->dev->netdev_ops = &ieee80211_dataif_ops; | |
| sdata->dev->type = ARPHRD_ETHER; | |
| } | |
| skb_queue_head_init(&sdata->skb_queue); | |
| skb_queue_head_init(&sdata->status_queue); | |
| wiphy_work_init(&sdata->work, ieee80211_iface_work); | |
| wiphy_work_init(&sdata->activate_links_work, | |
| ieee80211_activate_links_work); | |
| switch (type) { | |
| case NL80211_IFTYPE_P2P_GO: | |
| type = NL80211_IFTYPE_AP; | |
| sdata->vif.type = type; | |
| sdata->vif.p2p = true; | |
| fallthrough; | |
| case NL80211_IFTYPE_AP: | |
| skb_queue_head_init(&sdata->u.ap.ps.bc_buf); | |
| INIT_LIST_HEAD(&sdata->u.ap.vlans); | |
| sdata->vif.bss_conf.bssid = sdata->vif.addr; | |
| break; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| type = NL80211_IFTYPE_STATION; | |
| sdata->vif.type = type; | |
| sdata->vif.p2p = true; | |
| fallthrough; | |
| case NL80211_IFTYPE_STATION: | |
| sdata->vif.bss_conf.bssid = sdata->deflink.u.mgd.bssid; | |
| ieee80211_sta_setup_sdata(sdata); | |
| break; | |
| case NL80211_IFTYPE_OCB: | |
| sdata->vif.bss_conf.bssid = bssid_wildcard; | |
| ieee80211_ocb_setup_sdata(sdata); | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid; | |
| ieee80211_ibss_setup_sdata(sdata); | |
| break; | |
| case NL80211_IFTYPE_MESH_POINT: | |
| if (ieee80211_vif_is_mesh(&sdata->vif)) | |
| ieee80211_mesh_init_sdata(sdata); | |
| break; | |
| case NL80211_IFTYPE_MONITOR: | |
| sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP; | |
| sdata->dev->netdev_ops = &ieee80211_monitorif_ops; | |
| sdata->u.mntr.flags = MONITOR_FLAG_CONTROL | | |
| MONITOR_FLAG_OTHER_BSS; | |
| break; | |
| case NL80211_IFTYPE_NAN: | |
| if (!(sdata->local->hw.wiphy->nan_capa.flags & | |
| WIPHY_NAN_FLAGS_USERSPACE_DE)) { | |
| idr_init(&sdata->u.nan.de.function_inst_ids); | |
| spin_lock_init(&sdata->u.nan.de.func_lock); | |
| } | |
| sdata->vif.bss_conf.bssid = sdata->vif.addr; | |
| break; | |
| case NL80211_IFTYPE_AP_VLAN: | |
| case NL80211_IFTYPE_P2P_DEVICE: | |
| sdata->vif.bss_conf.bssid = sdata->vif.addr; | |
| break; | |
| case NL80211_IFTYPE_NAN_DATA: | |
| case NL80211_IFTYPE_PD: | |
| break; | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| case NL80211_IFTYPE_WDS: | |
| case NUM_NL80211_IFTYPES: | |
| WARN_ON(1); | |
| break; | |
| } | |
| /* need to do this after the switch so vif.type is correct */ | |
| ieee80211_link_setup(&sdata->deflink); | |
| ieee80211_debugfs_recreate_netdev(sdata, false); | |
| } | |
| static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata, | |
| enum nl80211_iftype type) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| int ret, err; | |
| enum nl80211_iftype internal_type = type; | |
| bool p2p = false; | |
| ASSERT_RTNL(); | |
| if (!local->ops->change_interface) | |
| return -EBUSY; | |
| /* for now, don't support changing while links exist */ | |
| if (ieee80211_vif_is_mld(&sdata->vif)) | |
| return -EBUSY; | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP: | |
| if (!list_empty(&sdata->u.ap.vlans)) | |
| return -EBUSY; | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| case NL80211_IFTYPE_OCB: | |
| /* | |
| * Could maybe also all others here? | |
| * Just not sure how that interacts | |
| * with the RX/config path e.g. for | |
| * mesh. | |
| */ | |
| break; | |
| default: | |
| return -EBUSY; | |
| } | |
| switch (type) { | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| case NL80211_IFTYPE_OCB: | |
| /* | |
| * Could probably support everything | |
| * but here. | |
| */ | |
| break; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| p2p = true; | |
| internal_type = NL80211_IFTYPE_STATION; | |
| break; | |
| case NL80211_IFTYPE_P2P_GO: | |
| p2p = true; | |
| internal_type = NL80211_IFTYPE_AP; | |
| break; | |
| default: | |
| return -EBUSY; | |
| } | |
| ret = ieee80211_check_concurrent_iface(sdata, internal_type); | |
| if (ret) | |
| return ret; | |
| ieee80211_stop_vif_queues(local, sdata, | |
| IEEE80211_QUEUE_STOP_REASON_IFTYPE_CHANGE); | |
| /* do_stop will synchronize_rcu() first thing */ | |
| ieee80211_do_stop(sdata, false); | |
| ieee80211_teardown_sdata(sdata); | |
| ieee80211_set_sdata_offload_flags(sdata); | |
| ret = drv_change_interface(local, sdata, internal_type, p2p); | |
| if (ret) | |
| type = ieee80211_vif_type_p2p(&sdata->vif); | |
| /* | |
| * Ignore return value here, there's not much we can do since | |
| * the driver changed the interface type internally already. | |
| * The warnings will hopefully make driver authors fix it :-) | |
| */ | |
| ieee80211_check_queues(sdata, type); | |
| ieee80211_setup_sdata(sdata, type); | |
| ieee80211_set_vif_encap_ops(sdata); | |
| err = ieee80211_do_open(&sdata->wdev, false); | |
| WARN(err, "type change: do_open returned %d", err); | |
| ieee80211_wake_vif_queues(local, sdata, | |
| IEEE80211_QUEUE_STOP_REASON_IFTYPE_CHANGE); | |
| return ret; | |
| } | |
| int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, | |
| enum nl80211_iftype type) | |
| { | |
| int ret; | |
| ASSERT_RTNL(); | |
| if (type == ieee80211_vif_type_p2p(&sdata->vif)) | |
| return 0; | |
| if (ieee80211_sdata_running(sdata)) { | |
| ret = ieee80211_runtime_change_iftype(sdata, type); | |
| if (ret) | |
| return ret; | |
| } else { | |
| /* Purge and reset type-dependent state. */ | |
| ieee80211_teardown_sdata(sdata); | |
| ieee80211_setup_sdata(sdata, type); | |
| } | |
| /* reset some values that shouldn't be kept across type changes */ | |
| if (type == NL80211_IFTYPE_STATION) | |
| sdata->u.mgd.use_4addr = false; | |
| return 0; | |
| } | |
| static void ieee80211_assign_perm_addr(struct ieee80211_local *local, | |
| u8 *perm_addr, enum nl80211_iftype type) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| u64 mask, start, addr, val, inc; | |
| u8 *m; | |
| u8 tmp_addr[ETH_ALEN]; | |
| int i; | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| /* default ... something at least */ | |
| memcpy(perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN); | |
| if (is_zero_ether_addr(local->hw.wiphy->addr_mask) && | |
| local->hw.wiphy->n_addresses <= 1) | |
| return; | |
| switch (type) { | |
| case NL80211_IFTYPE_MONITOR: | |
| /* doesn't matter */ | |
| break; | |
| case NL80211_IFTYPE_AP_VLAN: | |
| /* match up with an AP interface */ | |
| list_for_each_entry(sdata, &local->interfaces, list) { | |
| if (sdata->vif.type != NL80211_IFTYPE_AP) | |
| continue; | |
| memcpy(perm_addr, sdata->vif.addr, ETH_ALEN); | |
| break; | |
| } | |
| /* keep default if no AP interface present */ | |
| break; | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| if (ieee80211_hw_check(&local->hw, P2P_DEV_ADDR_FOR_INTF)) { | |
| list_for_each_entry(sdata, &local->interfaces, list) { | |
| if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) | |
| continue; | |
| if (!ieee80211_sdata_running(sdata)) | |
| continue; | |
| memcpy(perm_addr, sdata->vif.addr, ETH_ALEN); | |
| return; | |
| } | |
| } | |
| fallthrough; | |
| default: | |
| /* assign a new address if possible -- try n_addresses first */ | |
| for (i = 0; i < local->hw.wiphy->n_addresses; i++) { | |
| bool used = false; | |
| list_for_each_entry(sdata, &local->interfaces, list) { | |
| if (ether_addr_equal(local->hw.wiphy->addresses[i].addr, | |
| sdata->vif.addr)) { | |
| used = true; | |
| break; | |
| } | |
| } | |
| if (!used) { | |
| memcpy(perm_addr, | |
| local->hw.wiphy->addresses[i].addr, | |
| ETH_ALEN); | |
| break; | |
| } | |
| } | |
| /* try mask if available */ | |
| if (is_zero_ether_addr(local->hw.wiphy->addr_mask)) | |
| break; | |
| m = local->hw.wiphy->addr_mask; | |
| mask = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | |
| ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | |
| ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | |
| if (__ffs64(mask) + hweight64(mask) != fls64(mask)) { | |
| /* not a contiguous mask ... not handled now! */ | |
| pr_info("not contiguous\n"); | |
| break; | |
| } | |
| /* | |
| * Pick address of existing interface in case user changed | |
| * MAC address manually, default to perm_addr. | |
| */ | |
| m = local->hw.wiphy->perm_addr; | |
| list_for_each_entry(sdata, &local->interfaces, list) { | |
| if (sdata->vif.type == NL80211_IFTYPE_MONITOR) | |
| continue; | |
| m = sdata->vif.addr; | |
| break; | |
| } | |
| start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | |
| ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | |
| ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | |
| inc = 1ULL<<__ffs64(mask); | |
| val = (start & mask); | |
| addr = (start & ~mask) | (val & mask); | |
| do { | |
| bool used = false; | |
| tmp_addr[5] = addr >> 0*8; | |
| tmp_addr[4] = addr >> 1*8; | |
| tmp_addr[3] = addr >> 2*8; | |
| tmp_addr[2] = addr >> 3*8; | |
| tmp_addr[1] = addr >> 4*8; | |
| tmp_addr[0] = addr >> 5*8; | |
| val += inc; | |
| list_for_each_entry(sdata, &local->interfaces, list) { | |
| if (ether_addr_equal(tmp_addr, sdata->vif.addr)) { | |
| used = true; | |
| break; | |
| } | |
| } | |
| if (!used) { | |
| memcpy(perm_addr, tmp_addr, ETH_ALEN); | |
| break; | |
| } | |
| addr = (start & ~mask) | (val & mask); | |
| } while (addr != start); | |
| break; | |
| } | |
| } | |
| int ieee80211_if_add(struct ieee80211_local *local, const char *name, | |
| unsigned char name_assign_type, | |
| struct wireless_dev **new_wdev, enum nl80211_iftype type, | |
| struct vif_params *params) | |
| { | |
| struct net_device *ndev = NULL; | |
| struct ieee80211_sub_if_data *sdata = NULL; | |
| struct txq_info *txqi; | |
| int ret, i; | |
| ASSERT_RTNL(); | |
| lockdep_assert_wiphy(local->hw.wiphy); | |
| if (type == NL80211_IFTYPE_P2P_DEVICE || type == NL80211_IFTYPE_NAN) { | |
| int size = ALIGN(sizeof(*sdata) + local->hw.vif_data_size, | |
| sizeof(void *)); | |
| struct wireless_dev *wdev; | |
| int txq_size = 0; | |
| if (type == NL80211_IFTYPE_NAN) | |
| txq_size = sizeof(struct txq_info) + | |
| local->hw.txq_data_size; | |
| sdata = kzalloc(size + txq_size, GFP_KERNEL); | |
| if (!sdata) | |
| return -ENOMEM; | |
| wdev = &sdata->wdev; | |
| sdata->dev = NULL; | |
| strscpy(sdata->name, name, IFNAMSIZ); | |
| if (is_valid_ether_addr(params->macaddr)) | |
| memcpy(wdev->address, params->macaddr, ETH_ALEN); | |
| else | |
| ieee80211_assign_perm_addr(local, wdev->address, type); | |
| memcpy(sdata->vif.addr, wdev->address, ETH_ALEN); | |
| ether_addr_copy(sdata->vif.bss_conf.addr, sdata->vif.addr); | |
| /* | |
| * Add a management TXQ for NAN devices which includes frames | |
| * that will only be transmitted during discovery windows (DWs) | |
| */ | |
| if (type == NL80211_IFTYPE_NAN) { | |
| txqi = (struct txq_info *)((unsigned long)sdata + size); | |
| ieee80211_txq_init(sdata, NULL, txqi, | |
| IEEE80211_NUM_TIDS); | |
| } | |
| } else { | |
| int size = ALIGN(sizeof(*sdata) + local->hw.vif_data_size, | |
| sizeof(void *)); | |
| int txq_size = 0; | |
| if (type != NL80211_IFTYPE_AP_VLAN && | |
| (type != NL80211_IFTYPE_MONITOR || | |
| (params->flags & MONITOR_FLAG_ACTIVE))) | |
| txq_size += sizeof(struct txq_info) + | |
| local->hw.txq_data_size; | |
| ndev = alloc_netdev_mqs(size + txq_size, | |
| name, name_assign_type, | |
| ieee80211_if_setup, 1, 1); | |
| if (!ndev) | |
| return -ENOMEM; | |
| dev_net_set(ndev, wiphy_net(local->hw.wiphy)); | |
| ndev->pcpu_stat_type = NETDEV_PCPU_STAT_TSTATS; | |
| ndev->needed_headroom = local->tx_headroom + | |
| 4*6 /* four MAC addresses */ | |
| + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */ | |
| + 6 /* mesh */ | |
| + 8 /* rfc1042/bridge tunnel */ | |
| - ETH_HLEN /* ethernet hard_header_len */ | |
| + IEEE80211_ENCRYPT_HEADROOM; | |
| ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM; | |
| ret = dev_alloc_name(ndev, ndev->name); | |
| if (ret < 0) { | |
| free_netdev(ndev); | |
| return ret; | |
| } | |
| ieee80211_assign_perm_addr(local, ndev->perm_addr, type); | |
| if (is_valid_ether_addr(params->macaddr)) | |
| eth_hw_addr_set(ndev, params->macaddr); | |
| else | |
| eth_hw_addr_set(ndev, ndev->perm_addr); | |
| SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy)); | |
| /* don't use IEEE80211_DEV_TO_SUB_IF -- it checks too much */ | |
| sdata = netdev_priv(ndev); | |
| ndev->ieee80211_ptr = &sdata->wdev; | |
| memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN); | |
| ether_addr_copy(sdata->vif.bss_conf.addr, sdata->vif.addr); | |
| memcpy(sdata->name, ndev->name, IFNAMSIZ); | |
| if (txq_size) { | |
| txqi = netdev_priv(ndev) + size; | |
| ieee80211_txq_init(sdata, NULL, txqi, 0); | |
| } | |
| sdata->dev = ndev; | |
| } | |
| /* initialise type-independent data */ | |
| sdata->wdev.wiphy = local->hw.wiphy; | |
| ieee80211_sdata_init(local, sdata); | |
| ieee80211_init_frag_cache(&sdata->frags); | |
| wiphy_delayed_work_init(&sdata->dec_tailroom_needed_wk, | |
| ieee80211_delayed_tailroom_dec); | |
| for (i = 0; i < NUM_NL80211_BANDS; i++) { | |
| struct ieee80211_supported_band *sband; | |
| sband = local->hw.wiphy->bands[i]; | |
| sdata->rc_rateidx_mask[i] = | |
| sband ? (1 << sband->n_bitrates) - 1 : 0; | |
| if (sband) { | |
| __le16 cap; | |
| u16 *vht_rate_mask; | |
| memcpy(sdata->rc_rateidx_mcs_mask[i], | |
| sband->ht_cap.mcs.rx_mask, | |
| sizeof(sdata->rc_rateidx_mcs_mask[i])); | |
| cap = sband->vht_cap.vht_mcs.rx_mcs_map; | |
| vht_rate_mask = sdata->rc_rateidx_vht_mcs_mask[i]; | |
| ieee80211_get_vht_mask_from_cap(cap, vht_rate_mask); | |
| } else { | |
| memset(sdata->rc_rateidx_mcs_mask[i], 0, | |
| sizeof(sdata->rc_rateidx_mcs_mask[i])); | |
| memset(sdata->rc_rateidx_vht_mcs_mask[i], 0, | |
| sizeof(sdata->rc_rateidx_vht_mcs_mask[i])); | |
| } | |
| } | |
| ieee80211_set_default_queues(sdata); | |
| /* setup type-dependent data */ | |
| ieee80211_setup_sdata(sdata, type); | |
| if (ndev) { | |
| ndev->ieee80211_ptr->use_4addr = params->use_4addr; | |
| if (type == NL80211_IFTYPE_STATION) | |
| sdata->u.mgd.use_4addr = params->use_4addr; | |
| ndev->features |= local->hw.netdev_features; | |
| ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE; | |
| ndev->hw_features |= ndev->features & | |
| MAC80211_SUPPORTED_FEATURES_TX; | |
| sdata->vif.netdev_features = local->hw.netdev_features; | |
| netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops); | |
| /* MTU range is normally 256 - 2304, where the upper limit is | |
| * the maximum MSDU size. Monitor interfaces send and receive | |
| * MPDU and A-MSDU frames which may be much larger so we do | |
| * not impose an upper limit in that case. | |
| */ | |
| ndev->min_mtu = 256; | |
| if (type == NL80211_IFTYPE_MONITOR) | |
| ndev->max_mtu = 0; | |
| else | |
| ndev->max_mtu = local->hw.max_mtu; | |
| ret = cfg80211_register_netdevice(ndev); | |
| if (ret) { | |
| free_netdev(ndev); | |
| return ret; | |
| } | |
| } | |
| mutex_lock(&local->iflist_mtx); | |
| list_add_tail_rcu(&sdata->list, &local->interfaces); | |
| mutex_unlock(&local->iflist_mtx); | |
| if (new_wdev) | |
| *new_wdev = &sdata->wdev; | |
| return 0; | |
| } | |
| void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata) | |
| { | |
| ASSERT_RTNL(); | |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); | |
| mutex_lock(&sdata->local->iflist_mtx); | |
| list_del_rcu(&sdata->list); | |
| mutex_unlock(&sdata->local->iflist_mtx); | |
| if (sdata->vif.txq) | |
| ieee80211_txq_purge(sdata->local, to_txq_info(sdata->vif.txq)); | |
| if (sdata->vif.txq_mgmt) | |
| ieee80211_txq_purge(sdata->local, | |
| to_txq_info(sdata->vif.txq_mgmt)); | |
| synchronize_rcu(); | |
| cfg80211_unregister_wdev(&sdata->wdev); | |
| if (!sdata->dev) { | |
| ieee80211_teardown_sdata(sdata); | |
| kfree(sdata); | |
| } | |
| } | |
| void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata) | |
| { | |
| if (WARN_ON_ONCE(!test_bit(SDATA_STATE_RUNNING, &sdata->state))) | |
| return; | |
| ieee80211_do_stop(sdata, true); | |
| } | |
| void ieee80211_remove_interfaces(struct ieee80211_local *local) | |
| { | |
| struct ieee80211_sub_if_data *sdata, *tmp; | |
| LIST_HEAD(unreg_list); | |
| ASSERT_RTNL(); | |
| /* Before destroying the interfaces, make sure they're all stopped so | |
| * that the hardware is stopped. Otherwise, the driver might still be | |
| * iterating the interfaces during the shutdown, e.g. from a worker | |
| * or from RX processing or similar, and if it does so (using atomic | |
| * iteration) while we're manipulating the list, the iteration will | |
| * crash. | |
| * | |
| * After this, the hardware should be stopped and the driver should | |
| * have stopped all of its activities, so that we can do RCU-unaware | |
| * manipulations of the interface list below. | |
| */ | |
| cfg80211_shutdown_all_interfaces(local->hw.wiphy); | |
| guard(wiphy)(local->hw.wiphy); | |
| WARN(local->open_count, "%s: open count remains %d\n", | |
| wiphy_name(local->hw.wiphy), local->open_count); | |
| mutex_lock(&local->iflist_mtx); | |
| list_splice_init(&local->interfaces, &unreg_list); | |
| mutex_unlock(&local->iflist_mtx); | |
| list_for_each_entry_safe(sdata, tmp, &unreg_list, list) { | |
| bool netdev = sdata->dev; | |
| /* | |
| * Remove IP addresses explicitly, since the notifier will | |
| * skip the callbacks if wdev->registered is false, since | |
| * we can't acquire the wiphy_lock() again there if already | |
| * inside this locked section. | |
| */ | |
| sdata->vif.cfg.arp_addr_cnt = 0; | |
| if (sdata->vif.type == NL80211_IFTYPE_STATION && | |
| sdata->u.mgd.associated) | |
| ieee80211_vif_cfg_change_notify(sdata, | |
| BSS_CHANGED_ARP_FILTER); | |
| list_del(&sdata->list); | |
| cfg80211_unregister_wdev(&sdata->wdev); | |
| if (!netdev) | |
| kfree(sdata); | |
| } | |
| } | |
| static int netdev_notify(struct notifier_block *nb, | |
| unsigned long state, void *ptr) | |
| { | |
| struct net_device *dev = netdev_notifier_info_to_dev(ptr); | |
| struct ieee80211_sub_if_data *sdata; | |
| if (state != NETDEV_CHANGENAME) | |
| return NOTIFY_DONE; | |
| if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy) | |
| return NOTIFY_DONE; | |
| if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid) | |
| return NOTIFY_DONE; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| memcpy(sdata->name, dev->name, IFNAMSIZ); | |
| ieee80211_debugfs_rename_netdev(sdata); | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block mac80211_netdev_notifier = { | |
| .notifier_call = netdev_notify, | |
| }; | |
| int ieee80211_iface_init(void) | |
| { | |
| return register_netdevice_notifier(&mac80211_netdev_notifier); | |
| } | |
| void ieee80211_iface_exit(void) | |
| { | |
| unregister_netdevice_notifier(&mac80211_netdev_notifier); | |
| } | |
| void ieee80211_vif_inc_num_mcast(struct ieee80211_sub_if_data *sdata) | |
| { | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) | |
| atomic_inc(&sdata->u.ap.num_mcast_sta); | |
| else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| atomic_inc(&sdata->u.vlan.num_mcast_sta); | |
| } | |
| void ieee80211_vif_dec_num_mcast(struct ieee80211_sub_if_data *sdata) | |
| { | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) | |
| atomic_dec(&sdata->u.ap.num_mcast_sta); | |
| else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| atomic_dec(&sdata->u.vlan.num_mcast_sta); | |
| } | |
| void ieee80211_vif_block_queues_csa(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| if (ieee80211_hw_check(&local->hw, HANDLES_QUIET_CSA)) | |
| return; | |
| ieee80211_stop_vif_queues_norefcount(local, sdata, | |
| IEEE80211_QUEUE_STOP_REASON_CSA); | |
| } | |
| void ieee80211_vif_unblock_queues_csa(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| ieee80211_wake_vif_queues_norefcount(local, sdata, | |
| IEEE80211_QUEUE_STOP_REASON_CSA); | |
| } |