| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (c) 2008, 2009 open80211s Ltd. | |
| * Copyright (C) 2018-2026 Intel Corporation | |
| * Authors: Luis Carlos Cobo <luisca@cozybit.com> | |
| * Javier Cardona <javier@cozybit.com> | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/unaligned.h> | |
| #include <net/sock.h> | |
| #include "ieee80211_i.h" | |
| #include "mesh.h" | |
| #include "wme.h" | |
| #include "driver-ops.h" | |
| static int mesh_allocated; | |
| static struct kmem_cache *rm_cache; | |
| bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) | |
| { | |
| return mgmt->u.action.action_code == WLAN_MESH_ACTION_HWMP_PATH_SELECTION; | |
| } | |
| void ieee80211s_init(void) | |
| { | |
| mesh_allocated = 1; | |
| rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry), | |
| 0, 0, NULL); | |
| } | |
| void ieee80211s_stop(void) | |
| { | |
| if (!mesh_allocated) | |
| return; | |
| kmem_cache_destroy(rm_cache); | |
| } | |
| static void ieee80211_mesh_housekeeping_timer(struct timer_list *t) | |
| { | |
| struct ieee80211_sub_if_data *sdata = | |
| timer_container_of(sdata, t, u.mesh.housekeeping_timer); | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | |
| wiphy_work_queue(local->hw.wiphy, &sdata->work); | |
| } | |
| /** | |
| * mesh_matches_local - check if the config of a mesh point matches ours | |
| * | |
| * @sdata: local mesh subif | |
| * @ie: information elements of a management frame from the mesh peer | |
| * | |
| * This function checks if the mesh configuration of a mesh point matches the | |
| * local mesh configuration, i.e. if both nodes belong to the same mesh network. | |
| * | |
| * Returns: %true if both nodes belong to the same mesh | |
| */ | |
| bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, | |
| struct ieee802_11_elems *ie) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| u32 basic_rates = 0; | |
| struct cfg80211_chan_def sta_chan_def; | |
| struct ieee80211_supported_band *sband; | |
| u32 vht_cap_info = 0; | |
| /* | |
| * As support for each feature is added, check for matching | |
| * - On mesh config capabilities | |
| * - Power Save Support En | |
| * - Sync support enabled | |
| * - Sync support active | |
| * - Sync support required from peer | |
| * - MDA enabled | |
| * - Power management control on fc | |
| */ | |
| if (!ie->mesh_config) | |
| return false; | |
| if (!(ifmsh->mesh_id_len == ie->mesh_id_len && | |
| memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && | |
| (ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) && | |
| (ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) && | |
| (ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) && | |
| (ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) && | |
| (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))) | |
| return false; | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return false; | |
| ieee80211_sta_get_rates(sdata, ie, sband->band, | |
| &basic_rates); | |
| if (sdata->vif.bss_conf.basic_rates != basic_rates) | |
| return false; | |
| cfg80211_chandef_create(&sta_chan_def, sdata->vif.bss_conf.chanreq.oper.chan, | |
| NL80211_CHAN_NO_HT); | |
| ieee80211_chandef_ht_oper(ie->ht_operation, &sta_chan_def); | |
| if (ie->vht_cap_elem) | |
| vht_cap_info = le32_to_cpu(ie->vht_cap_elem->vht_cap_info); | |
| ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info, | |
| ie->vht_operation, ie->ht_operation, | |
| &sta_chan_def); | |
| ieee80211_chandef_he_6ghz_oper(sdata->local, ie->he_operation, | |
| ie->eht_operation, | |
| &sta_chan_def); | |
| if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chanreq.oper, | |
| &sta_chan_def)) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links | |
| * | |
| * @ie: information elements of a management frame from the mesh peer | |
| * | |
| * Returns: %true if the mesh peer is willing to establish peer links | |
| */ | |
| bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie) | |
| { | |
| return (ie->mesh_config->meshconf_cap & | |
| IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0; | |
| } | |
| /** | |
| * mesh_accept_plinks_update - update accepting_plink in local mesh beacons | |
| * | |
| * @sdata: mesh interface in which mesh beacons are going to be updated | |
| * | |
| * Returns: beacon changed flag if the beacon content changed. | |
| */ | |
| u64 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) | |
| { | |
| bool free_plinks; | |
| u64 changed = 0; | |
| /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0, | |
| * the mesh interface might be able to establish plinks with peers that | |
| * are already on the table but are not on PLINK_ESTAB state. However, | |
| * in general the mesh interface is not accepting peer link requests | |
| * from new peers, and that must be reflected in the beacon | |
| */ | |
| free_plinks = mesh_plink_availables(sdata); | |
| if (free_plinks != sdata->u.mesh.accepting_plinks) { | |
| sdata->u.mesh.accepting_plinks = free_plinks; | |
| changed = BSS_CHANGED_BEACON; | |
| } | |
| return changed; | |
| } | |
| /* | |
| * mesh_sta_cleanup - clean up any mesh sta state | |
| * | |
| * @sta: mesh sta to clean up. | |
| */ | |
| void mesh_sta_cleanup(struct sta_info *sta) | |
| { | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| u64 changed = mesh_plink_deactivate(sta); | |
| if (changed) | |
| ieee80211_mbss_info_change_notify(sdata, changed); | |
| } | |
| int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) | |
| { | |
| int i; | |
| sdata->u.mesh.rmc = kmalloc_obj(struct mesh_rmc); | |
| if (!sdata->u.mesh.rmc) | |
| return -ENOMEM; | |
| sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1; | |
| for (i = 0; i < RMC_BUCKETS; i++) | |
| INIT_HLIST_HEAD(&sdata->u.mesh.rmc->bucket[i]); | |
| return 0; | |
| } | |
| void mesh_rmc_free(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct mesh_rmc *rmc = sdata->u.mesh.rmc; | |
| struct rmc_entry *p; | |
| struct hlist_node *n; | |
| int i; | |
| if (!sdata->u.mesh.rmc) | |
| return; | |
| for (i = 0; i < RMC_BUCKETS; i++) { | |
| hlist_for_each_entry_safe(p, n, &rmc->bucket[i], list) { | |
| hlist_del(&p->list); | |
| kmem_cache_free(rm_cache, p); | |
| } | |
| } | |
| kfree(rmc); | |
| sdata->u.mesh.rmc = NULL; | |
| } | |
| /** | |
| * mesh_rmc_check - Check frame in recent multicast cache and add if absent. | |
| * | |
| * @sdata: interface | |
| * @sa: source address | |
| * @mesh_hdr: mesh_header | |
| * | |
| * Returns: 0 if the frame is not in the cache, nonzero otherwise. | |
| * | |
| * Checks using the source address and the mesh sequence number if we have | |
| * received this frame lately. If the frame is not in the cache, it is added to | |
| * it. | |
| */ | |
| int mesh_rmc_check(struct ieee80211_sub_if_data *sdata, | |
| const u8 *sa, struct ieee80211s_hdr *mesh_hdr) | |
| { | |
| struct mesh_rmc *rmc = sdata->u.mesh.rmc; | |
| u32 seqnum = 0; | |
| int entries = 0; | |
| u8 idx; | |
| struct rmc_entry *p; | |
| struct hlist_node *n; | |
| if (!rmc) | |
| return -1; | |
| /* Don't care about endianness since only match matters */ | |
| memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); | |
| idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask; | |
| hlist_for_each_entry_safe(p, n, &rmc->bucket[idx], list) { | |
| ++entries; | |
| if (time_after(jiffies, p->exp_time) || | |
| entries == RMC_QUEUE_MAX_LEN) { | |
| hlist_del(&p->list); | |
| kmem_cache_free(rm_cache, p); | |
| --entries; | |
| } else if ((seqnum == p->seqnum) && ether_addr_equal(sa, p->sa)) | |
| return -1; | |
| } | |
| p = kmem_cache_alloc(rm_cache, GFP_ATOMIC); | |
| if (!p) | |
| return 0; | |
| p->seqnum = seqnum; | |
| p->exp_time = jiffies + RMC_TIMEOUT; | |
| memcpy(p->sa, sa, ETH_ALEN); | |
| hlist_add_head(&p->list, &rmc->bucket[idx]); | |
| return 0; | |
| } | |
| int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| u8 *pos, neighbors; | |
| u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie); | |
| bool is_connected_to_gate = ifmsh->num_gates > 0 || | |
| ifmsh->mshcfg.dot11MeshGateAnnouncementProtocol || | |
| ifmsh->mshcfg.dot11MeshConnectedToMeshGate; | |
| bool is_connected_to_as = ifmsh->mshcfg.dot11MeshConnectedToAuthServer; | |
| if (skb_tailroom(skb) < 2 + meshconf_len) | |
| return -ENOMEM; | |
| pos = skb_put(skb, 2 + meshconf_len); | |
| *pos++ = WLAN_EID_MESH_CONFIG; | |
| *pos++ = meshconf_len; | |
| /* save a pointer for quick updates in pre-tbtt */ | |
| ifmsh->meshconf_offset = pos - skb->data; | |
| /* Active path selection protocol ID */ | |
| *pos++ = ifmsh->mesh_pp_id; | |
| /* Active path selection metric ID */ | |
| *pos++ = ifmsh->mesh_pm_id; | |
| /* Congestion control mode identifier */ | |
| *pos++ = ifmsh->mesh_cc_id; | |
| /* Synchronization protocol identifier */ | |
| *pos++ = ifmsh->mesh_sp_id; | |
| /* Authentication Protocol identifier */ | |
| *pos++ = ifmsh->mesh_auth_id; | |
| /* Mesh Formation Info - number of neighbors */ | |
| neighbors = atomic_read(&ifmsh->estab_plinks); | |
| neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS); | |
| *pos++ = (is_connected_to_as << 7) | | |
| (neighbors << 1) | | |
| is_connected_to_gate; | |
| /* Mesh capability */ | |
| *pos = 0x00; | |
| *pos |= ifmsh->mshcfg.dot11MeshForwarding ? | |
| IEEE80211_MESHCONF_CAPAB_FORWARDING : 0x00; | |
| *pos |= ifmsh->accepting_plinks ? | |
| IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00; | |
| /* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */ | |
| *pos |= ifmsh->ps_peers_deep_sleep ? | |
| IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00; | |
| return 0; | |
| } | |
| int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| u8 *pos; | |
| if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len) | |
| return -ENOMEM; | |
| pos = skb_put(skb, 2 + ifmsh->mesh_id_len); | |
| *pos++ = WLAN_EID_MESH_ID; | |
| *pos++ = ifmsh->mesh_id_len; | |
| if (ifmsh->mesh_id_len) | |
| memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len); | |
| return 0; | |
| } | |
| static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| u8 *pos; | |
| /* see IEEE802.11-2012 13.14.6 */ | |
| if (ifmsh->ps_peers_light_sleep == 0 && | |
| ifmsh->ps_peers_deep_sleep == 0 && | |
| ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE) | |
| return 0; | |
| if (skb_tailroom(skb) < 4) | |
| return -ENOMEM; | |
| pos = skb_put(skb, 2 + 2); | |
| *pos++ = WLAN_EID_MESH_AWAKE_WINDOW; | |
| *pos++ = 2; | |
| put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos); | |
| return 0; | |
| } | |
| int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| u8 offset, len; | |
| const u8 *data; | |
| if (!ifmsh->ie || !ifmsh->ie_len) | |
| return 0; | |
| /* fast-forward to vendor IEs */ | |
| offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0); | |
| if (offset < ifmsh->ie_len) { | |
| len = ifmsh->ie_len - offset; | |
| data = ifmsh->ie + offset; | |
| if (skb_tailroom(skb) < len) | |
| return -ENOMEM; | |
| skb_put_data(skb, data, len); | |
| } | |
| return 0; | |
| } | |
| int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| u8 len = 0; | |
| const u8 *data; | |
| if (!ifmsh->ie || !ifmsh->ie_len) | |
| return 0; | |
| /* find RSN IE */ | |
| data = cfg80211_find_ie(WLAN_EID_RSN, ifmsh->ie, ifmsh->ie_len); | |
| if (!data) | |
| return 0; | |
| len = data[1] + 2; | |
| if (skb_tailroom(skb) < len) | |
| return -ENOMEM; | |
| skb_put_data(skb, data, len); | |
| return 0; | |
| } | |
| static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| struct ieee80211_channel *chan; | |
| u8 *pos; | |
| if (skb_tailroom(skb) < 3) | |
| return -ENOMEM; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | |
| if (WARN_ON(!chanctx_conf)) { | |
| rcu_read_unlock(); | |
| return -EINVAL; | |
| } | |
| chan = chanctx_conf->def.chan; | |
| rcu_read_unlock(); | |
| pos = skb_put(skb, 2 + 1); | |
| *pos++ = WLAN_EID_DS_PARAMS; | |
| *pos++ = 1; | |
| *pos++ = ieee80211_frequency_to_channel(chan->center_freq); | |
| return 0; | |
| } | |
| int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| u8 *pos; | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return -EINVAL; | |
| /* HT not allowed in 6 GHz */ | |
| if (sband->band == NL80211_BAND_6GHZ) | |
| return 0; | |
| if (!sband->ht_cap.ht_supported || | |
| sdata->vif.bss_conf.chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return 0; | |
| if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap)) | |
| return -ENOMEM; | |
| pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap)); | |
| ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap); | |
| return 0; | |
| } | |
| int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| struct ieee80211_channel *channel; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_sta_ht_cap *ht_cap; | |
| u8 *pos; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | |
| if (WARN_ON(!chanctx_conf)) { | |
| rcu_read_unlock(); | |
| return -EINVAL; | |
| } | |
| channel = chanctx_conf->def.chan; | |
| rcu_read_unlock(); | |
| sband = local->hw.wiphy->bands[channel->band]; | |
| ht_cap = &sband->ht_cap; | |
| /* HT not allowed in 6 GHz */ | |
| if (sband->band == NL80211_BAND_6GHZ) | |
| return 0; | |
| if (!ht_cap->ht_supported || | |
| sdata->vif.bss_conf.chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return 0; | |
| if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation)) | |
| return -ENOMEM; | |
| pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation)); | |
| ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chanreq.oper, | |
| sdata->vif.bss_conf.ht_operation_mode, | |
| false); | |
| return 0; | |
| } | |
| int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| u8 *pos; | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return -EINVAL; | |
| /* VHT not allowed in 6 GHz */ | |
| if (sband->band == NL80211_BAND_6GHZ) | |
| return 0; | |
| if (!sband->vht_cap.vht_supported || | |
| sdata->vif.bss_conf.chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return 0; | |
| if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_cap)) | |
| return -ENOMEM; | |
| pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_cap)); | |
| ieee80211_ie_build_vht_cap(pos, &sband->vht_cap, sband->vht_cap.cap); | |
| return 0; | |
| } | |
| int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| struct ieee80211_channel *channel; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_sta_vht_cap *vht_cap; | |
| u8 *pos; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | |
| if (WARN_ON(!chanctx_conf)) { | |
| rcu_read_unlock(); | |
| return -EINVAL; | |
| } | |
| channel = chanctx_conf->def.chan; | |
| rcu_read_unlock(); | |
| sband = local->hw.wiphy->bands[channel->band]; | |
| vht_cap = &sband->vht_cap; | |
| /* VHT not allowed in 6 GHz */ | |
| if (sband->band == NL80211_BAND_6GHZ) | |
| return 0; | |
| if (!vht_cap->vht_supported || | |
| sdata->vif.bss_conf.chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return 0; | |
| if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_operation)) | |
| return -ENOMEM; | |
| pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_operation)); | |
| ieee80211_ie_build_vht_oper(pos, vht_cap, | |
| &sdata->vif.bss_conf.chanreq.oper); | |
| return 0; | |
| } | |
| int mesh_add_he_cap_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb, u8 ie_len) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return -EINVAL; | |
| if (sdata->vif.bss_conf.chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return 0; | |
| return ieee80211_put_he_cap(skb, sdata, sband, NULL); | |
| } | |
| int mesh_add_he_oper_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| const struct ieee80211_sta_he_cap *he_cap; | |
| struct ieee80211_supported_band *sband; | |
| u32 len; | |
| u8 *pos; | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return -EINVAL; | |
| he_cap = ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_MESH_POINT); | |
| if (!he_cap || | |
| sdata->vif.bss_conf.chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return 0; | |
| len = 2 + 1 + sizeof(struct ieee80211_he_operation); | |
| if (sdata->vif.bss_conf.chanreq.oper.chan->band == NL80211_BAND_6GHZ) | |
| len += sizeof(struct ieee80211_he_6ghz_oper); | |
| if (skb_tailroom(skb) < len) | |
| return -ENOMEM; | |
| pos = skb_put(skb, len); | |
| ieee80211_ie_build_he_oper(pos, &sdata->vif.bss_conf.chanreq.oper); | |
| return 0; | |
| } | |
| int mesh_add_he_6ghz_cap_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| const struct ieee80211_sband_iftype_data *iftd; | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return -EINVAL; | |
| if (sband->band != NL80211_BAND_6GHZ) | |
| return 0; | |
| iftd = ieee80211_get_sband_iftype_data(sband, | |
| NL80211_IFTYPE_MESH_POINT); | |
| /* The device doesn't support HE in mesh mode or at all */ | |
| if (!iftd) | |
| return 0; | |
| ieee80211_put_he_6ghz_cap(skb, sdata, sdata->deflink.smps_mode); | |
| return 0; | |
| } | |
| int mesh_add_eht_cap_ie(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb, u8 ie_len) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return -EINVAL; | |
| if (sdata->vif.bss_conf.chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return 0; | |
| return ieee80211_put_eht_cap(skb, sdata, sband, NULL); | |
| } | |
| int mesh_add_eht_oper_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) | |
| { | |
| const struct ieee80211_sta_eht_cap *eht_cap; | |
| struct ieee80211_supported_band *sband; | |
| u32 len; | |
| u8 *pos; | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return -EINVAL; | |
| eht_cap = ieee80211_get_eht_iftype_cap(sband, NL80211_IFTYPE_MESH_POINT); | |
| if (!eht_cap || | |
| sdata->vif.bss_conf.chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return 0; | |
| len = 2 + 1 + offsetof(struct ieee80211_eht_operation, optional) + | |
| offsetof(struct ieee80211_eht_operation_info, optional); | |
| if (skb_tailroom(skb) < len) | |
| return -ENOMEM; | |
| pos = skb_put(skb, len); | |
| ieee80211_ie_build_eht_oper(pos, &sdata->vif.bss_conf.chanreq.oper, eht_cap); | |
| return 0; | |
| } | |
| static void ieee80211_mesh_path_timer(struct timer_list *t) | |
| { | |
| struct ieee80211_sub_if_data *sdata = | |
| timer_container_of(sdata, t, u.mesh.mesh_path_timer); | |
| wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work); | |
| } | |
| static void ieee80211_mesh_path_root_timer(struct timer_list *t) | |
| { | |
| struct ieee80211_sub_if_data *sdata = | |
| timer_container_of(sdata, t, u.mesh.mesh_path_root_timer); | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | |
| wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work); | |
| } | |
| void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh) | |
| { | |
| if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT) | |
| set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | |
| else { | |
| clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags); | |
| /* stop running timer */ | |
| timer_delete_sync(&ifmsh->mesh_path_root_timer); | |
| } | |
| } | |
| static void | |
| ieee80211_mesh_update_bss_params(struct ieee80211_sub_if_data *sdata, | |
| u8 *ie, u8 ie_len) | |
| { | |
| struct ieee80211_supported_band *sband; | |
| const struct element *cap; | |
| const struct ieee80211_he_operation *he_oper = NULL; | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return; | |
| if (!ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_MESH_POINT) || | |
| sdata->vif.bss_conf.chanreq.oper.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return; | |
| sdata->vif.bss_conf.he_support = true; | |
| cap = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_OPERATION, ie, ie_len); | |
| if (cap && cap->datalen >= 1 + sizeof(*he_oper) && | |
| cap->datalen >= 1 + ieee80211_he_oper_size(cap->data + 1)) | |
| he_oper = (void *)(cap->data + 1); | |
| if (he_oper) | |
| sdata->vif.bss_conf.he_oper.params = | |
| __le32_to_cpu(he_oper->he_oper_params); | |
| sdata->vif.bss_conf.eht_support = | |
| !!ieee80211_get_eht_iftype_cap(sband, NL80211_IFTYPE_MESH_POINT); | |
| } | |
| bool ieee80211_mesh_xmit_fast(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb, u32 ctrl_flags) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| struct ieee80211_mesh_fast_tx_key key = { | |
| .type = MESH_FAST_TX_TYPE_LOCAL | |
| }; | |
| struct ieee80211_mesh_fast_tx *entry; | |
| struct ieee80211s_hdr *meshhdr; | |
| u8 sa[ETH_ALEN] __aligned(2); | |
| struct tid_ampdu_tx *tid_tx; | |
| struct sta_info *sta; | |
| bool copy_sa = false; | |
| u16 ethertype; | |
| u8 tid; | |
| if (ctrl_flags & IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP) | |
| return false; | |
| if (ifmsh->mshcfg.dot11MeshNolearn) | |
| return false; | |
| /* Add support for these cases later */ | |
| if (ifmsh->ps_peers_light_sleep || ifmsh->ps_peers_deep_sleep) | |
| return false; | |
| if (is_multicast_ether_addr(skb->data)) | |
| return false; | |
| ethertype = (skb->data[12] << 8) | skb->data[13]; | |
| if (ethertype < ETH_P_802_3_MIN) | |
| return false; | |
| if (sk_requests_wifi_status(skb->sk)) | |
| return false; | |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { | |
| skb_set_transport_header(skb, skb_checksum_start_offset(skb)); | |
| if (skb_checksum_help(skb)) | |
| return false; | |
| } | |
| ether_addr_copy(key.addr, skb->data); | |
| if (!ether_addr_equal(skb->data + ETH_ALEN, sdata->vif.addr)) | |
| key.type = MESH_FAST_TX_TYPE_PROXIED; | |
| entry = mesh_fast_tx_get(sdata, &key); | |
| if (!entry) | |
| return false; | |
| if (skb_headroom(skb) < entry->hdrlen + entry->fast_tx.hdr_len) | |
| return false; | |
| sta = rcu_dereference(entry->mpath->next_hop); | |
| if (!sta) | |
| return false; | |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | |
| tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); | |
| if (tid_tx) { | |
| if (!test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) | |
| return false; | |
| if (tid_tx->timeout) | |
| tid_tx->last_tx = jiffies; | |
| } | |
| skb = skb_share_check(skb, GFP_ATOMIC); | |
| if (!skb) | |
| return true; | |
| skb_set_queue_mapping(skb, ieee80211_select_queue(sdata, sta, skb)); | |
| meshhdr = (struct ieee80211s_hdr *)entry->hdr; | |
| if ((meshhdr->flags & MESH_FLAGS_AE) == MESH_FLAGS_AE_A5_A6) { | |
| /* preserve SA from eth header for 6-addr frames */ | |
| ether_addr_copy(sa, skb->data + ETH_ALEN); | |
| copy_sa = true; | |
| } | |
| memcpy(skb_push(skb, entry->hdrlen - 2 * ETH_ALEN), entry->hdr, | |
| entry->hdrlen); | |
| meshhdr = (struct ieee80211s_hdr *)skb->data; | |
| put_unaligned_le32(atomic_inc_return(&sdata->u.mesh.mesh_seqnum), | |
| &meshhdr->seqnum); | |
| meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; | |
| if (copy_sa) | |
| ether_addr_copy(meshhdr->eaddr2, sa); | |
| skb_push(skb, 2 * ETH_ALEN); | |
| __ieee80211_xmit_fast(sdata, sta, &entry->fast_tx, skb, tid_tx, | |
| entry->mpath->dst, sdata->vif.addr); | |
| return true; | |
| } | |
| /** | |
| * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame | |
| * @hdr: 802.11 frame header | |
| * @fc: frame control field | |
| * @meshda: destination address in the mesh | |
| * @meshsa: source address in the mesh. Same as TA, as frame is | |
| * locally originated. | |
| * | |
| * Returns: the length of the 802.11 frame header (excludes mesh control header) | |
| */ | |
| int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, | |
| const u8 *meshda, const u8 *meshsa) | |
| { | |
| if (is_multicast_ether_addr(meshda)) { | |
| *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | |
| /* DA TA SA */ | |
| memcpy(hdr->addr1, meshda, ETH_ALEN); | |
| memcpy(hdr->addr2, meshsa, ETH_ALEN); | |
| memcpy(hdr->addr3, meshsa, ETH_ALEN); | |
| return 24; | |
| } else { | |
| *fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | |
| /* RA TA DA SA */ | |
| eth_zero_addr(hdr->addr1); /* RA is resolved later */ | |
| memcpy(hdr->addr2, meshsa, ETH_ALEN); | |
| memcpy(hdr->addr3, meshda, ETH_ALEN); | |
| memcpy(hdr->addr4, meshsa, ETH_ALEN); | |
| return 30; | |
| } | |
| } | |
| /** | |
| * ieee80211_new_mesh_header - create a new mesh header | |
| * @sdata: mesh interface to be used | |
| * @meshhdr: uninitialized mesh header | |
| * @addr4or5: 1st address in the ae header, which may correspond to address 4 | |
| * (if addr6 is NULL) or address 5 (if addr6 is present). It may | |
| * be NULL. | |
| * @addr6: 2nd address in the ae header, which corresponds to addr6 of the | |
| * mesh frame | |
| * | |
| * Returns: the header length | |
| */ | |
| unsigned int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211s_hdr *meshhdr, | |
| const char *addr4or5, const char *addr6) | |
| { | |
| if (WARN_ON(!addr4or5 && addr6)) | |
| return 0; | |
| memset(meshhdr, 0, sizeof(*meshhdr)); | |
| meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL; | |
| put_unaligned_le32(atomic_inc_return(&sdata->u.mesh.mesh_seqnum), | |
| &meshhdr->seqnum); | |
| if (addr4or5 && !addr6) { | |
| meshhdr->flags |= MESH_FLAGS_AE_A4; | |
| memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | |
| return 2 * ETH_ALEN; | |
| } else if (addr4or5 && addr6) { | |
| meshhdr->flags |= MESH_FLAGS_AE_A5_A6; | |
| memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN); | |
| memcpy(meshhdr->eaddr2, addr6, ETH_ALEN); | |
| return 3 * ETH_ALEN; | |
| } | |
| return ETH_ALEN; | |
| } | |
| static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| u64 changed; | |
| if (ifmsh->mshcfg.plink_timeout > 0) | |
| ieee80211_sta_expire(sdata, ifmsh->mshcfg.plink_timeout * HZ); | |
| mesh_path_expire(sdata); | |
| changed = mesh_accept_plinks_update(sdata); | |
| ieee80211_mbss_info_change_notify(sdata, changed); | |
| mesh_fast_tx_gc(sdata); | |
| mod_timer(&ifmsh->housekeeping_timer, | |
| round_jiffies(jiffies + | |
| IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); | |
| } | |
| static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| u32 interval; | |
| mesh_path_tx_root_frame(sdata); | |
| if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN) | |
| interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval; | |
| else | |
| interval = ifmsh->mshcfg.dot11MeshHWMProotInterval; | |
| mod_timer(&ifmsh->mesh_path_root_timer, | |
| round_jiffies(TU_TO_EXP_TIME(interval))); | |
| } | |
| static int | |
| ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) | |
| { | |
| struct beacon_data *bcn; | |
| int head_len, tail_len; | |
| struct sk_buff *skb; | |
| struct ieee80211_mgmt *mgmt; | |
| struct mesh_csa_settings *csa; | |
| const struct ieee80211_supported_band *sband; | |
| u8 ie_len_he_cap, ie_len_eht_cap; | |
| u8 *pos; | |
| struct ieee80211_sub_if_data *sdata; | |
| int hdr_len = offsetofend(struct ieee80211_mgmt, u.beacon); | |
| sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh); | |
| sband = ieee80211_get_sband(sdata); | |
| ie_len_he_cap = ieee80211_ie_len_he_cap(sdata); | |
| ie_len_eht_cap = ieee80211_ie_len_eht_cap(sdata); | |
| head_len = hdr_len + | |
| 2 + /* NULL SSID */ | |
| /* Channel Switch Announcement */ | |
| 2 + sizeof(struct ieee80211_channel_sw_ie) + | |
| /* Mesh Channel Switch Parameters */ | |
| 2 + sizeof(struct ieee80211_mesh_chansw_params_ie) + | |
| /* Channel Switch Wrapper + Wide Bandwidth CSA IE */ | |
| 2 + 2 + sizeof(struct ieee80211_wide_bw_chansw_ie) + | |
| 2 + sizeof(struct ieee80211_sec_chan_offs_ie) + | |
| 2 + 8 + /* supported rates */ | |
| 2 + 3; /* DS params */ | |
| tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) + | |
| 2 + sizeof(struct ieee80211_ht_cap) + | |
| 2 + sizeof(struct ieee80211_ht_operation) + | |
| 2 + ifmsh->mesh_id_len + | |
| 2 + sizeof(struct ieee80211_meshconf_ie) + | |
| 2 + sizeof(__le16) + /* awake window */ | |
| 2 + sizeof(struct ieee80211_vht_cap) + | |
| 2 + sizeof(struct ieee80211_vht_operation) + | |
| ie_len_he_cap + | |
| 2 + 1 + sizeof(struct ieee80211_he_operation) + | |
| sizeof(struct ieee80211_he_6ghz_oper) + | |
| 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa) + | |
| ie_len_eht_cap + | |
| 2 + 1 + offsetof(struct ieee80211_eht_operation, optional) + | |
| offsetof(struct ieee80211_eht_operation_info, optional) + | |
| ifmsh->ie_len; | |
| bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL); | |
| /* need an skb for IE builders to operate on */ | |
| skb = __dev_alloc_skb(max(head_len, tail_len), GFP_KERNEL); | |
| if (!bcn || !skb) | |
| goto out_free; | |
| /* | |
| * pointers go into the block we allocated, | |
| * memory is | beacon_data | head | tail | | |
| */ | |
| bcn->head = ((u8 *) bcn) + sizeof(*bcn); | |
| /* fill in the head */ | |
| mgmt = skb_put_zero(skb, hdr_len); | |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_BEACON); | |
| eth_broadcast_addr(mgmt->da); | |
| memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | |
| memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); | |
| ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); | |
| mgmt->u.beacon.beacon_int = | |
| cpu_to_le16(sdata->vif.bss_conf.beacon_int); | |
| mgmt->u.beacon.capab_info |= cpu_to_le16( | |
| sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0); | |
| pos = skb_put(skb, 2); | |
| *pos++ = WLAN_EID_SSID; | |
| *pos++ = 0x0; | |
| rcu_read_lock(); | |
| csa = rcu_dereference(ifmsh->csa); | |
| if (csa) { | |
| enum nl80211_channel_type ct; | |
| struct cfg80211_chan_def *chandef; | |
| int ie_len = 2 + sizeof(struct ieee80211_channel_sw_ie) + | |
| 2 + sizeof(struct ieee80211_mesh_chansw_params_ie); | |
| pos = skb_put_zero(skb, ie_len); | |
| *pos++ = WLAN_EID_CHANNEL_SWITCH; | |
| *pos++ = 3; | |
| *pos++ = 0x0; | |
| *pos++ = ieee80211_frequency_to_channel( | |
| csa->settings.chandef.chan->center_freq); | |
| bcn->cntdwn_current_counter = csa->settings.count; | |
| bcn->cntdwn_counter_offsets[0] = hdr_len + 6; | |
| *pos++ = csa->settings.count; | |
| *pos++ = WLAN_EID_CHAN_SWITCH_PARAM; | |
| *pos++ = 6; | |
| if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) { | |
| *pos++ = ifmsh->mshcfg.dot11MeshTTL; | |
| *pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; | |
| } else { | |
| *pos++ = ifmsh->chsw_ttl; | |
| } | |
| *pos++ |= csa->settings.block_tx ? | |
| WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00; | |
| put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos); | |
| pos += 2; | |
| put_unaligned_le16(ifmsh->pre_value, pos); | |
| pos += 2; | |
| switch (csa->settings.chandef.width) { | |
| case NL80211_CHAN_WIDTH_40: | |
| ie_len = 2 + sizeof(struct ieee80211_sec_chan_offs_ie); | |
| pos = skb_put_zero(skb, ie_len); | |
| *pos++ = WLAN_EID_SECONDARY_CHANNEL_OFFSET; /* EID */ | |
| *pos++ = 1; /* len */ | |
| ct = cfg80211_get_chandef_type(&csa->settings.chandef); | |
| if (ct == NL80211_CHAN_HT40PLUS) | |
| *pos++ = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; | |
| else | |
| *pos++ = IEEE80211_HT_PARAM_CHA_SEC_BELOW; | |
| break; | |
| case NL80211_CHAN_WIDTH_80: | |
| case NL80211_CHAN_WIDTH_80P80: | |
| case NL80211_CHAN_WIDTH_160: | |
| /* Channel Switch Wrapper + Wide Bandwidth CSA IE */ | |
| ie_len = 2 + 2 + | |
| sizeof(struct ieee80211_wide_bw_chansw_ie); | |
| pos = skb_put_zero(skb, ie_len); | |
| *pos++ = WLAN_EID_CHANNEL_SWITCH_WRAPPER; /* EID */ | |
| *pos++ = 5; /* len */ | |
| /* put sub IE */ | |
| chandef = &csa->settings.chandef; | |
| ieee80211_ie_build_wide_bw_cs(pos, chandef); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| if (ieee80211_put_srates_elem(skb, sband, | |
| sdata->vif.bss_conf.basic_rates, | |
| 0, WLAN_EID_SUPP_RATES) || | |
| mesh_add_ds_params_ie(sdata, skb)) | |
| goto out_free; | |
| bcn->head_len = skb->len; | |
| memcpy(bcn->head, skb->data, bcn->head_len); | |
| /* now the tail */ | |
| skb_trim(skb, 0); | |
| bcn->tail = bcn->head + bcn->head_len; | |
| if (ieee80211_put_srates_elem(skb, sband, | |
| sdata->vif.bss_conf.basic_rates, | |
| 0, WLAN_EID_EXT_SUPP_RATES) || | |
| mesh_add_rsn_ie(sdata, skb) || | |
| mesh_add_ht_cap_ie(sdata, skb) || | |
| mesh_add_ht_oper_ie(sdata, skb) || | |
| mesh_add_meshid_ie(sdata, skb) || | |
| mesh_add_meshconf_ie(sdata, skb) || | |
| mesh_add_awake_window_ie(sdata, skb) || | |
| mesh_add_vht_cap_ie(sdata, skb) || | |
| mesh_add_vht_oper_ie(sdata, skb) || | |
| mesh_add_he_cap_ie(sdata, skb, ie_len_he_cap) || | |
| mesh_add_he_oper_ie(sdata, skb) || | |
| mesh_add_he_6ghz_cap_ie(sdata, skb) || | |
| mesh_add_eht_cap_ie(sdata, skb, ie_len_eht_cap) || | |
| mesh_add_eht_oper_ie(sdata, skb) || | |
| mesh_add_vendor_ies(sdata, skb)) | |
| goto out_free; | |
| bcn->tail_len = skb->len; | |
| memcpy(bcn->tail, skb->data, bcn->tail_len); | |
| ieee80211_mesh_update_bss_params(sdata, bcn->tail, bcn->tail_len); | |
| bcn->meshconf = (struct ieee80211_meshconf_ie *) | |
| (bcn->tail + ifmsh->meshconf_offset); | |
| dev_kfree_skb(skb); | |
| rcu_assign_pointer(ifmsh->beacon, bcn); | |
| return 0; | |
| out_free: | |
| kfree(bcn); | |
| dev_kfree_skb(skb); | |
| return -ENOMEM; | |
| } | |
| static int | |
| ieee80211_mesh_rebuild_beacon(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct beacon_data *old_bcn; | |
| int ret; | |
| old_bcn = sdata_dereference(sdata->u.mesh.beacon, sdata); | |
| ret = ieee80211_mesh_build_beacon(&sdata->u.mesh); | |
| if (ret) | |
| /* just reuse old beacon */ | |
| return ret; | |
| if (old_bcn) | |
| kfree_rcu(old_bcn, rcu_head); | |
| return 0; | |
| } | |
| void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata, | |
| u64 changed) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| unsigned long bits[] = { BITMAP_FROM_U64(changed) }; | |
| u32 bit; | |
| if (!changed) | |
| return; | |
| /* if we race with running work, worst case this work becomes a noop */ | |
| for_each_set_bit(bit, bits, sizeof(changed) * BITS_PER_BYTE) | |
| set_bit(bit, ifmsh->mbss_changed); | |
| set_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags); | |
| wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work); | |
| } | |
| int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| struct ieee80211_local *local = sdata->local; | |
| u64 changed = BSS_CHANGED_BEACON | | |
| BSS_CHANGED_BEACON_ENABLED | | |
| BSS_CHANGED_HT | | |
| BSS_CHANGED_BASIC_RATES | | |
| BSS_CHANGED_BEACON_INT | | |
| BSS_CHANGED_MCAST_RATE; | |
| local->fif_other_bss++; | |
| /* mesh ifaces must set allmulti to forward mcast traffic */ | |
| atomic_inc(&local->iff_allmultis); | |
| ieee80211_configure_filter(local); | |
| ifmsh->mesh_cc_id = 0; /* Disabled */ | |
| /* register sync ops from extensible synchronization framework */ | |
| ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id); | |
| ifmsh->sync_offset_clockdrift_max = 0; | |
| set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags); | |
| ieee80211_mesh_root_setup(ifmsh); | |
| wiphy_work_queue(local->hw.wiphy, &sdata->work); | |
| sdata->vif.bss_conf.ht_operation_mode = | |
| ifmsh->mshcfg.ht_opmode; | |
| sdata->vif.bss_conf.enable_beacon = true; | |
| changed |= ieee80211_mps_local_status_update(sdata); | |
| if (ieee80211_mesh_build_beacon(ifmsh)) { | |
| ieee80211_stop_mesh(sdata); | |
| return -ENOMEM; | |
| } | |
| ieee80211_recalc_dtim(sdata, drv_get_tsf(local, sdata)); | |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, changed); | |
| netif_carrier_on(sdata->dev); | |
| return 0; | |
| } | |
| void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| struct beacon_data *bcn; | |
| netif_carrier_off(sdata->dev); | |
| /* flush STAs and mpaths on this iface */ | |
| sta_info_flush(sdata, -1); | |
| ieee80211_free_keys(sdata, true); | |
| mesh_path_flush_by_iface(sdata); | |
| /* stop the beacon */ | |
| ifmsh->mesh_id_len = 0; | |
| sdata->vif.bss_conf.enable_beacon = false; | |
| sdata->beacon_rate_set = false; | |
| clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); | |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, | |
| BSS_CHANGED_BEACON_ENABLED); | |
| /* remove beacon */ | |
| bcn = sdata_dereference(ifmsh->beacon, sdata); | |
| RCU_INIT_POINTER(ifmsh->beacon, NULL); | |
| kfree_rcu(bcn, rcu_head); | |
| /* free all potentially still buffered group-addressed frames */ | |
| local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf); | |
| skb_queue_purge(&ifmsh->ps.bc_buf); | |
| timer_delete_sync(&sdata->u.mesh.housekeeping_timer); | |
| timer_delete_sync(&sdata->u.mesh.mesh_path_root_timer); | |
| timer_delete_sync(&sdata->u.mesh.mesh_path_timer); | |
| /* clear any mesh work (for next join) we may have accrued */ | |
| ifmsh->wrkq_flags = 0; | |
| memset(ifmsh->mbss_changed, 0, sizeof(ifmsh->mbss_changed)); | |
| local->fif_other_bss--; | |
| atomic_dec(&local->iff_allmultis); | |
| ieee80211_configure_filter(local); | |
| } | |
| static void ieee80211_mesh_csa_mark_radar(struct ieee80211_sub_if_data *sdata) | |
| { | |
| int err; | |
| /* if the current channel is a DFS channel, mark the channel as | |
| * unavailable. | |
| */ | |
| err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy, | |
| &sdata->vif.bss_conf.chanreq.oper, | |
| NL80211_IFTYPE_MESH_POINT); | |
| if (err > 0) | |
| cfg80211_radar_event(sdata->local->hw.wiphy, | |
| &sdata->vif.bss_conf.chanreq.oper, | |
| GFP_ATOMIC); | |
| } | |
| static bool | |
| ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, | |
| struct ieee802_11_elems *elems, bool beacon) | |
| { | |
| struct cfg80211_csa_settings params; | |
| struct ieee80211_csa_ie csa_ie; | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| struct ieee80211_supported_band *sband; | |
| int err; | |
| struct ieee80211_conn_settings conn = ieee80211_conn_settings_unlimited; | |
| u32 vht_cap_info = 0; | |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); | |
| sband = ieee80211_get_sband(sdata); | |
| if (!sband) | |
| return false; | |
| switch (sdata->vif.bss_conf.chanreq.oper.width) { | |
| case NL80211_CHAN_WIDTH_20_NOHT: | |
| conn.mode = IEEE80211_CONN_MODE_LEGACY; | |
| conn.bw_limit = IEEE80211_CONN_BW_LIMIT_20; | |
| break; | |
| case NL80211_CHAN_WIDTH_20: | |
| conn.mode = IEEE80211_CONN_MODE_HT; | |
| conn.bw_limit = IEEE80211_CONN_BW_LIMIT_20; | |
| break; | |
| case NL80211_CHAN_WIDTH_40: | |
| conn.mode = IEEE80211_CONN_MODE_HT; | |
| conn.bw_limit = IEEE80211_CONN_BW_LIMIT_40; | |
| break; | |
| default: | |
| break; | |
| } | |
| if (elems->vht_cap_elem) | |
| vht_cap_info = | |
| le32_to_cpu(elems->vht_cap_elem->vht_cap_info); | |
| memset(¶ms, 0, sizeof(params)); | |
| err = ieee80211_parse_ch_switch_ie(sdata, elems, sband->band, | |
| vht_cap_info, &conn, | |
| sdata->vif.addr, false, | |
| &csa_ie); | |
| if (err < 0) | |
| return false; | |
| if (err) | |
| return false; | |
| /* Mark the channel unavailable if the reason for the switch is | |
| * regulatory. | |
| */ | |
| if (csa_ie.reason_code == WLAN_REASON_MESH_CHAN_REGULATORY) | |
| ieee80211_mesh_csa_mark_radar(sdata); | |
| params.chandef = csa_ie.chanreq.oper; | |
| params.count = csa_ie.count; | |
| if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, ¶ms.chandef, | |
| IEEE80211_CHAN_DISABLED) || | |
| !cfg80211_reg_can_beacon(sdata->local->hw.wiphy, ¶ms.chandef, | |
| NL80211_IFTYPE_MESH_POINT)) { | |
| sdata_info(sdata, | |
| "mesh STA %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n", | |
| sdata->vif.addr, | |
| params.chandef.chan->center_freq, | |
| params.chandef.width, | |
| params.chandef.center_freq1, | |
| params.chandef.center_freq2); | |
| return false; | |
| } | |
| err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy, | |
| ¶ms.chandef, | |
| NL80211_IFTYPE_MESH_POINT); | |
| if (err < 0) | |
| return false; | |
| if (err > 0 && !ifmsh->userspace_handles_dfs) { | |
| sdata_info(sdata, | |
| "mesh STA %pM switches to channel requiring DFS (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n", | |
| sdata->vif.addr, | |
| params.chandef.chan->center_freq, | |
| params.chandef.width, | |
| params.chandef.center_freq1, | |
| params.chandef.center_freq2); | |
| return false; | |
| } | |
| params.radar_required = err; | |
| if (cfg80211_chandef_identical(¶ms.chandef, | |
| &sdata->vif.bss_conf.chanreq.oper)) { | |
| mcsa_dbg(sdata, | |
| "received csa with an identical chandef, ignoring\n"); | |
| return true; | |
| } | |
| mcsa_dbg(sdata, | |
| "received channel switch announcement to go to channel %d MHz\n", | |
| params.chandef.chan->center_freq); | |
| params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT; | |
| if (beacon) { | |
| ifmsh->chsw_ttl = csa_ie.ttl - 1; | |
| if (ifmsh->pre_value >= csa_ie.pre_value) | |
| return false; | |
| ifmsh->pre_value = csa_ie.pre_value; | |
| } | |
| if (ifmsh->chsw_ttl >= ifmsh->mshcfg.dot11MeshTTL) | |
| return false; | |
| ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER; | |
| if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev, | |
| ¶ms) < 0) | |
| return false; | |
| return true; | |
| } | |
| static void | |
| ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_mgmt *mgmt, size_t len) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| struct sk_buff *presp; | |
| struct beacon_data *bcn; | |
| struct ieee80211_mgmt *hdr; | |
| struct ieee802_11_elems *elems; | |
| size_t baselen; | |
| u8 *pos; | |
| pos = mgmt->u.probe_req.variable; | |
| baselen = (u8 *) pos - (u8 *) mgmt; | |
| if (baselen > len) | |
| return; | |
| elems = ieee802_11_parse_elems(pos, len - baselen, | |
| IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_PROBE_REQ, | |
| NULL); | |
| if (!elems) | |
| return; | |
| if (!elems->mesh_id) | |
| goto free; | |
| /* 802.11-2012 10.1.4.3.2 */ | |
| if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) && | |
| !is_broadcast_ether_addr(mgmt->da)) || | |
| elems->ssid_len != 0) | |
| goto free; | |
| if (elems->mesh_id_len != 0 && | |
| (elems->mesh_id_len != ifmsh->mesh_id_len || | |
| memcmp(elems->mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len))) | |
| goto free; | |
| rcu_read_lock(); | |
| bcn = rcu_dereference(ifmsh->beacon); | |
| if (!bcn) | |
| goto out; | |
| presp = dev_alloc_skb(local->tx_headroom + | |
| bcn->head_len + bcn->tail_len); | |
| if (!presp) | |
| goto out; | |
| skb_reserve(presp, local->tx_headroom); | |
| skb_put_data(presp, bcn->head, bcn->head_len); | |
| skb_put_data(presp, bcn->tail, bcn->tail_len); | |
| hdr = (struct ieee80211_mgmt *) presp->data; | |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_PROBE_RESP); | |
| memcpy(hdr->da, mgmt->sa, ETH_ALEN); | |
| IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | |
| ieee80211_tx_skb(sdata, presp); | |
| out: | |
| rcu_read_unlock(); | |
| free: | |
| kfree(elems); | |
| } | |
| static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_mgmt *mgmt, | |
| size_t len, | |
| struct ieee80211_rx_status *rx_status) | |
| { | |
| u16 type = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_TYPE; | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| struct ieee802_11_elems *elems; | |
| struct ieee80211_channel *channel; | |
| size_t baselen; | |
| int freq; | |
| enum nl80211_band band = rx_status->band; | |
| /* ignore ProbeResp to foreign address */ | |
| if (type == (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP) && | |
| !ether_addr_equal(mgmt->da, sdata->vif.addr)) | |
| return; | |
| baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; | |
| if (baselen > len) | |
| return; | |
| elems = ieee802_11_parse_elems(mgmt->u.probe_resp.variable, | |
| len - baselen, type, NULL); | |
| if (!elems) | |
| return; | |
| /* ignore non-mesh or secure / insecure mismatch */ | |
| if ((!elems->mesh_id || !elems->mesh_config) || | |
| (elems->rsn && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) || | |
| (!elems->rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE)) | |
| goto free; | |
| if (elems->ds_params) | |
| freq = ieee80211_channel_to_frequency(elems->ds_params[0], band); | |
| else | |
| freq = rx_status->freq; | |
| channel = ieee80211_get_channel(local->hw.wiphy, freq); | |
| if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) | |
| goto free; | |
| if (mesh_matches_local(sdata, elems)) { | |
| mpl_dbg(sdata, "rssi_threshold=%d,rx_status->signal=%d\n", | |
| sdata->u.mesh.mshcfg.rssi_threshold, rx_status->signal); | |
| if (!sdata->u.mesh.user_mpm || | |
| sdata->u.mesh.mshcfg.rssi_threshold == 0 || | |
| sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal) | |
| mesh_neighbour_update(sdata, mgmt->sa, elems, | |
| rx_status); | |
| if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT && | |
| !sdata->vif.bss_conf.csa_active) | |
| ieee80211_mesh_process_chnswitch(sdata, elems, true); | |
| } | |
| if (ifmsh->sync_ops) | |
| ifmsh->sync_ops->rx_bcn_presp(sdata, | |
| type & IEEE80211_FCTL_STYPE, | |
| mgmt, len, | |
| elems->mesh_config, rx_status); | |
| free: | |
| kfree(elems); | |
| } | |
| int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata, u64 *changed) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| struct mesh_csa_settings *tmp_csa_settings; | |
| int ret = 0; | |
| /* Reset the TTL value and Initiator flag */ | |
| ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; | |
| ifmsh->chsw_ttl = 0; | |
| /* Remove the CSA and MCSP elements from the beacon */ | |
| tmp_csa_settings = sdata_dereference(ifmsh->csa, sdata); | |
| RCU_INIT_POINTER(ifmsh->csa, NULL); | |
| if (tmp_csa_settings) | |
| kfree_rcu(tmp_csa_settings, rcu_head); | |
| ret = ieee80211_mesh_rebuild_beacon(sdata); | |
| if (ret) | |
| return -EINVAL; | |
| *changed |= BSS_CHANGED_BEACON; | |
| mcsa_dbg(sdata, "complete switching to center freq %d MHz", | |
| sdata->vif.bss_conf.chanreq.oper.chan->center_freq); | |
| return 0; | |
| } | |
| int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata, | |
| struct cfg80211_csa_settings *csa_settings, | |
| u64 *changed) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| struct mesh_csa_settings *tmp_csa_settings; | |
| int ret = 0; | |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); | |
| tmp_csa_settings = kmalloc_obj(*tmp_csa_settings, GFP_ATOMIC); | |
| if (!tmp_csa_settings) | |
| return -ENOMEM; | |
| memcpy(&tmp_csa_settings->settings, csa_settings, | |
| sizeof(struct cfg80211_csa_settings)); | |
| rcu_assign_pointer(ifmsh->csa, tmp_csa_settings); | |
| ret = ieee80211_mesh_rebuild_beacon(sdata); | |
| if (ret) { | |
| tmp_csa_settings = rcu_dereference(ifmsh->csa); | |
| RCU_INIT_POINTER(ifmsh->csa, NULL); | |
| kfree_rcu(tmp_csa_settings, rcu_head); | |
| return ret; | |
| } | |
| *changed |= BSS_CHANGED_BEACON; | |
| return 0; | |
| } | |
| static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_mgmt *mgmt, size_t len, | |
| struct ieee802_11_elems *elems) | |
| { | |
| struct ieee80211_mgmt *mgmt_fwd; | |
| struct sk_buff *skb; | |
| struct ieee80211_local *local = sdata->local; | |
| skb = dev_alloc_skb(local->tx_headroom + len); | |
| if (!skb) | |
| return -ENOMEM; | |
| skb_reserve(skb, local->tx_headroom); | |
| mgmt_fwd = skb_put(skb, len); | |
| elems->mesh_chansw_params_ie->mesh_ttl--; | |
| elems->mesh_chansw_params_ie->mesh_flags &= | |
| ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; | |
| memcpy(mgmt_fwd, mgmt, len); | |
| eth_broadcast_addr(mgmt_fwd->da); | |
| memcpy(mgmt_fwd->sa, sdata->vif.addr, ETH_ALEN); | |
| memcpy(mgmt_fwd->bssid, sdata->vif.addr, ETH_ALEN); | |
| ieee80211_tx_skb(sdata, skb); | |
| return 0; | |
| } | |
| static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_mgmt *mgmt, size_t len) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| struct ieee802_11_elems *elems; | |
| u16 pre_value; | |
| bool fwd_csa = true; | |
| size_t baselen; | |
| u8 *pos; | |
| if (mgmt->u.action.action_code != WLAN_ACTION_SPCT_CHL_SWITCH) | |
| return; | |
| pos = mgmt->u.action.chan_switch.variable; | |
| baselen = offsetof(struct ieee80211_mgmt, | |
| u.action.chan_switch.variable); | |
| elems = ieee802_11_parse_elems(pos, len - baselen, | |
| IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_ACTION, | |
| NULL); | |
| if (!elems) | |
| return; | |
| if (!mesh_matches_local(sdata, elems)) | |
| goto free; | |
| if (!elems->mesh_chansw_params_ie) | |
| goto free; | |
| ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl; | |
| if (!--ifmsh->chsw_ttl) | |
| fwd_csa = false; | |
| pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value); | |
| if (ifmsh->pre_value >= pre_value) | |
| goto free; | |
| ifmsh->pre_value = pre_value; | |
| if (!sdata->vif.bss_conf.csa_active && | |
| !ieee80211_mesh_process_chnswitch(sdata, elems, false)) { | |
| mcsa_dbg(sdata, "Failed to process CSA action frame"); | |
| goto free; | |
| } | |
| /* forward or re-broadcast the CSA frame */ | |
| if (fwd_csa) { | |
| if (mesh_fwd_csa_frame(sdata, mgmt, len, elems) < 0) | |
| mcsa_dbg(sdata, "Failed to forward the CSA frame"); | |
| } | |
| free: | |
| kfree(elems); | |
| } | |
| static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_mgmt *mgmt, | |
| size_t len, | |
| struct ieee80211_rx_status *rx_status) | |
| { | |
| switch (mgmt->u.action.category) { | |
| case WLAN_CATEGORY_SELF_PROTECTED: | |
| switch (mgmt->u.action.action_code) { | |
| case WLAN_SP_MESH_PEERING_OPEN: | |
| case WLAN_SP_MESH_PEERING_CLOSE: | |
| case WLAN_SP_MESH_PEERING_CONFIRM: | |
| mesh_rx_plink_frame(sdata, mgmt, len, rx_status); | |
| break; | |
| } | |
| break; | |
| case WLAN_CATEGORY_MESH_ACTION: | |
| if (mesh_action_is_path_sel(mgmt)) | |
| mesh_rx_path_sel_frame(sdata, mgmt, len); | |
| break; | |
| case WLAN_CATEGORY_SPECTRUM_MGMT: | |
| mesh_rx_csa_frame(sdata, mgmt, len); | |
| break; | |
| } | |
| } | |
| void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_rx_status *rx_status; | |
| struct ieee80211_mgmt *mgmt; | |
| u16 stype; | |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); | |
| /* mesh already went down */ | |
| if (!sdata->u.mesh.mesh_id_len) | |
| return; | |
| rx_status = IEEE80211_SKB_RXCB(skb); | |
| mgmt = (struct ieee80211_mgmt *) skb->data; | |
| stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE; | |
| switch (stype) { | |
| case IEEE80211_STYPE_PROBE_RESP: | |
| case IEEE80211_STYPE_BEACON: | |
| ieee80211_mesh_rx_bcn_presp(sdata, mgmt, skb->len, rx_status); | |
| break; | |
| case IEEE80211_STYPE_PROBE_REQ: | |
| ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len); | |
| break; | |
| case IEEE80211_STYPE_ACTION: | |
| ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); | |
| break; | |
| } | |
| } | |
| static void mesh_bss_info_changed(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| u32 bit; | |
| u64 changed = 0; | |
| for_each_set_bit(bit, ifmsh->mbss_changed, | |
| sizeof(changed) * BITS_PER_BYTE) { | |
| clear_bit(bit, ifmsh->mbss_changed); | |
| changed |= BIT(bit); | |
| } | |
| if (sdata->vif.bss_conf.enable_beacon && | |
| (changed & (BSS_CHANGED_BEACON | | |
| BSS_CHANGED_HT | | |
| BSS_CHANGED_BASIC_RATES | | |
| BSS_CHANGED_BEACON_INT))) | |
| if (ieee80211_mesh_rebuild_beacon(sdata)) | |
| return; | |
| ieee80211_link_info_change_notify(sdata, &sdata->deflink, changed); | |
| } | |
| void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| lockdep_assert_wiphy(sdata->local->hw.wiphy); | |
| /* mesh already went down */ | |
| if (!sdata->u.mesh.mesh_id_len) | |
| return; | |
| if (ifmsh->preq_queue_len && | |
| time_after(jiffies, | |
| ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval))) | |
| mesh_path_start_discovery(sdata); | |
| if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags)) | |
| ieee80211_mesh_housekeeping(sdata); | |
| if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags)) | |
| ieee80211_mesh_rootpath(sdata); | |
| if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags)) | |
| mesh_sync_adjust_tsf(sdata); | |
| if (test_and_clear_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags)) | |
| mesh_bss_info_changed(sdata); | |
| } | |
| void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| static u8 zero_addr[ETH_ALEN] = {}; | |
| timer_setup(&ifmsh->housekeeping_timer, | |
| ieee80211_mesh_housekeeping_timer, 0); | |
| ifmsh->accepting_plinks = true; | |
| atomic_set(&ifmsh->mpaths, 0); | |
| mesh_rmc_init(sdata); | |
| ifmsh->last_preq = jiffies; | |
| ifmsh->next_perr = jiffies; | |
| ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; | |
| ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; | |
| /* Allocate all mesh structures when creating the first mesh interface. */ | |
| if (!mesh_allocated) | |
| ieee80211s_init(); | |
| mesh_pathtbl_init(sdata); | |
| timer_setup(&ifmsh->mesh_path_timer, ieee80211_mesh_path_timer, 0); | |
| timer_setup(&ifmsh->mesh_path_root_timer, | |
| ieee80211_mesh_path_root_timer, 0); | |
| INIT_LIST_HEAD(&ifmsh->preq_queue.list); | |
| skb_queue_head_init(&ifmsh->ps.bc_buf); | |
| spin_lock_init(&ifmsh->mesh_preq_queue_lock); | |
| spin_lock_init(&ifmsh->sync_offset_lock); | |
| RCU_INIT_POINTER(ifmsh->beacon, NULL); | |
| sdata->vif.bss_conf.bssid = zero_addr; | |
| } | |
| void ieee80211_mesh_teardown_sdata(struct ieee80211_sub_if_data *sdata) | |
| { | |
| mesh_rmc_free(sdata); | |
| mesh_pathtbl_unregister(sdata); | |
| } |