blob: 2ade249ab6df335b10c01c2122d49dc6082f4fbf [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* TI LP8788 MFD - buck regulator driver
*
* Copyright 2012 Texas Instruments
*
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/mfd/lp8788.h>
#include <linux/gpio/consumer.h>
/* register address */
#define LP8788_EN_BUCK 0x0C
#define LP8788_BUCK_DVS_SEL 0x1D
#define LP8788_BUCK1_VOUT0 0x1E
#define LP8788_BUCK1_VOUT1 0x1F
#define LP8788_BUCK1_VOUT2 0x20
#define LP8788_BUCK1_VOUT3 0x21
#define LP8788_BUCK2_VOUT0 0x22
#define LP8788_BUCK2_VOUT1 0x23
#define LP8788_BUCK2_VOUT2 0x24
#define LP8788_BUCK2_VOUT3 0x25
#define LP8788_BUCK3_VOUT 0x26
#define LP8788_BUCK4_VOUT 0x27
#define LP8788_BUCK1_TIMESTEP 0x28
#define LP8788_BUCK_PWM 0x2D
/* mask/shift bits */
#define LP8788_EN_BUCK1_M BIT(0) /* Addr 0Ch */
#define LP8788_EN_BUCK2_M BIT(1)
#define LP8788_EN_BUCK3_M BIT(2)
#define LP8788_EN_BUCK4_M BIT(3)
#define LP8788_BUCK1_DVS_SEL_M 0x04 /* Addr 1Dh */
#define LP8788_BUCK1_DVS_M 0x03
#define LP8788_BUCK1_DVS_S 0
#define LP8788_BUCK2_DVS_SEL_M 0x40
#define LP8788_BUCK2_DVS_M 0x30
#define LP8788_BUCK2_DVS_S 4
#define LP8788_BUCK1_DVS_I2C BIT(2)
#define LP8788_BUCK2_DVS_I2C BIT(6)
#define LP8788_BUCK1_DVS_PIN (0 << 2)
#define LP8788_BUCK2_DVS_PIN (0 << 6)
#define LP8788_VOUT_M 0x1F /* Addr 1Eh ~ 27h */
#define LP8788_STARTUP_TIME_M 0xF8 /* Addr 28h ~ 2Bh */
#define LP8788_STARTUP_TIME_S 3
#define LP8788_FPWM_BUCK1_M BIT(0) /* Addr 2Dh */
#define LP8788_FPWM_BUCK1_S 0
#define LP8788_FPWM_BUCK2_M BIT(1)
#define LP8788_FPWM_BUCK2_S 1
#define LP8788_FPWM_BUCK3_M BIT(2)
#define LP8788_FPWM_BUCK3_S 2
#define LP8788_FPWM_BUCK4_M BIT(3)
#define LP8788_FPWM_BUCK4_S 3
#define INVALID_ADDR 0xFF
#define LP8788_FORCE_PWM 1
#define LP8788_AUTO_PWM 0
#define PIN_LOW 0
#define PIN_HIGH 1
#define ENABLE_TIME_USEC 32
#define BUCK_FPWM_MASK(x) (1 << (x))
#define BUCK_FPWM_SHIFT(x) (x)
enum lp8788_dvs_state {
DVS_LOW = 0,
DVS_HIGH = 1,
};
enum lp8788_dvs_mode {
REGISTER,
EXTPIN,
};
enum lp8788_buck_id {
BUCK1,
BUCK2,
BUCK3,
BUCK4,
};
struct lp8788_buck {
struct lp8788 *lp;
struct regulator_dev *regulator;
void *dvs;
struct gpio_desc *gpio1;
struct gpio_desc *gpio2; /* Only used on BUCK2 */
};
/* BUCK 1 ~ 4 voltage ranges */
static const struct linear_range buck_volt_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 0, 0),
REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000),
};
static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
{
struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs;
enum lp8788_dvs_state pinstate;
if (!dvs)
return;
pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH;
gpiod_set_value(buck->gpio1, pinstate);
}
static void lp8788_buck2_set_dvs(struct lp8788_buck *buck)
{
struct lp8788_buck2_dvs *dvs = (struct lp8788_buck2_dvs *)buck->dvs;
enum lp8788_dvs_state pin1, pin2;
if (!dvs)
return;
switch (dvs->vsel) {
case DVS_SEL_V0:
pin1 = DVS_LOW;
pin2 = DVS_LOW;
break;
case DVS_SEL_V1:
pin1 = DVS_HIGH;
pin2 = DVS_LOW;
break;
case DVS_SEL_V2:
pin1 = DVS_LOW;
pin2 = DVS_HIGH;
break;
case DVS_SEL_V3:
pin1 = DVS_HIGH;
pin2 = DVS_HIGH;
break;
default:
return;
}
gpiod_set_value(buck->gpio1, pin1);
gpiod_set_value(buck->gpio2, pin2);
}
static void lp8788_set_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
{
switch (id) {
case BUCK1:
lp8788_buck1_set_dvs(buck);
break;
case BUCK2:
lp8788_buck2_set_dvs(buck);
break;
default:
break;
}
}
static enum lp8788_dvs_mode
lp8788_get_buck_dvs_ctrl_mode(struct lp8788_buck *buck, enum lp8788_buck_id id)
{
u8 val, mask;
switch (id) {
case BUCK1:
mask = LP8788_BUCK1_DVS_SEL_M;
break;
case BUCK2:
mask = LP8788_BUCK2_DVS_SEL_M;
break;
default:
return REGISTER;
}
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
return val & mask ? REGISTER : EXTPIN;
}
static bool lp8788_is_valid_buck_addr(u8 addr)
{
switch (addr) {
case LP8788_BUCK1_VOUT0:
case LP8788_BUCK1_VOUT1:
case LP8788_BUCK1_VOUT2:
case LP8788_BUCK1_VOUT3:
case LP8788_BUCK2_VOUT0:
case LP8788_BUCK2_VOUT1:
case LP8788_BUCK2_VOUT2:
case LP8788_BUCK2_VOUT3:
return true;
default:
return false;
}
}
static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck,
enum lp8788_buck_id id)
{
enum lp8788_dvs_mode mode = lp8788_get_buck_dvs_ctrl_mode(buck, id);
u8 val, idx, addr;
int pin1, pin2;
switch (id) {
case BUCK1:
if (mode == EXTPIN) {
idx = gpiod_get_value(buck->gpio1);
} else {
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S;
}
addr = LP8788_BUCK1_VOUT0 + idx;
break;
case BUCK2:
if (mode == EXTPIN) {
pin1 = gpiod_get_value(buck->gpio1);
pin2 = gpiod_get_value(buck->gpio2);
if (pin1 == PIN_LOW && pin2 == PIN_LOW)
idx = 0;
else if (pin1 == PIN_LOW && pin2 == PIN_HIGH)
idx = 2;
else if (pin1 == PIN_HIGH && pin2 == PIN_LOW)
idx = 1;
else
idx = 3;
} else {
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S;
}
addr = LP8788_BUCK2_VOUT0 + idx;
break;
default:
goto err;
}
return addr;
err:
return INVALID_ADDR;
}
static int lp8788_buck12_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
u8 addr;
if (buck->dvs)
lp8788_set_dvs(buck, id);
addr = lp8788_select_buck_vout_addr(buck, id);
if (!lp8788_is_valid_buck_addr(addr))
return -EINVAL;
return lp8788_update_bits(buck->lp, addr, LP8788_VOUT_M, selector);
}
static int lp8788_buck12_get_voltage_sel(struct regulator_dev *rdev)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
int ret;
u8 val, addr;
addr = lp8788_select_buck_vout_addr(buck, id);
if (!lp8788_is_valid_buck_addr(addr))
return -EINVAL;
ret = lp8788_read_byte(buck->lp, addr, &val);
if (ret)
return ret;
return val & LP8788_VOUT_M;
}
static int lp8788_buck_enable_time(struct regulator_dev *rdev)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
u8 val, addr = LP8788_BUCK1_TIMESTEP + id;
if (lp8788_read_byte(buck->lp, addr, &val))
return -EINVAL;
val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;
return ENABLE_TIME_USEC * val;
}
static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
u8 mask, val;
mask = BUCK_FPWM_MASK(id);
switch (mode) {
case REGULATOR_MODE_FAST:
val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id);
break;
case REGULATOR_MODE_NORMAL:
val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id);
break;
default:
return -EINVAL;
}
return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val);
}
static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
enum lp8788_buck_id id = rdev_get_id(rdev);
u8 val;
int ret;
ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val);
if (ret)
return ret;
return val & BUCK_FPWM_MASK(id) ?
REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
}
static const struct regulator_ops lp8788_buck12_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = lp8788_buck12_set_voltage_sel,
.get_voltage_sel = lp8788_buck12_get_voltage_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable_time = lp8788_buck_enable_time,
.set_mode = lp8788_buck_set_mode,
.get_mode = lp8788_buck_get_mode,
};
static const struct regulator_ops lp8788_buck34_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable_time = lp8788_buck_enable_time,
.set_mode = lp8788_buck_set_mode,
.get_mode = lp8788_buck_get_mode,
};
static const struct regulator_desc lp8788_buck_desc[] = {
{
.name = "buck1",
.id = BUCK1,
.ops = &lp8788_buck12_ops,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
.enable_mask = LP8788_EN_BUCK1_M,
},
{
.name = "buck2",
.id = BUCK2,
.ops = &lp8788_buck12_ops,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_reg = LP8788_EN_BUCK,
.enable_mask = LP8788_EN_BUCK2_M,
},
{
.name = "buck3",
.id = BUCK3,
.ops = &lp8788_buck34_ops,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK3_VOUT,
.vsel_mask = LP8788_VOUT_M,
.enable_reg = LP8788_EN_BUCK,
.enable_mask = LP8788_EN_BUCK3_M,
},
{
.name = "buck4",
.id = BUCK4,
.ops = &lp8788_buck34_ops,
.n_voltages = 26,
.linear_ranges = buck_volt_ranges,
.n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LP8788_BUCK4_VOUT,
.vsel_mask = LP8788_VOUT_M,
.enable_reg = LP8788_EN_BUCK,
.enable_mask = LP8788_EN_BUCK4_M,
},
};
static int lp8788_dvs_gpio_request(struct platform_device *pdev,
struct lp8788_buck *buck,
enum lp8788_buck_id id)
{
struct lp8788_platform_data *pdata = buck->lp->pdata;
struct device *dev = &pdev->dev;
switch (id) {
case BUCK1:
buck->gpio1 = devm_gpiod_get(dev, "dvs", GPIOD_OUT_LOW);
if (IS_ERR(buck->gpio1))
return PTR_ERR(buck->gpio1);
gpiod_set_consumer_name(buck->gpio1, "LP8788_B1_DVS");
buck->dvs = pdata->buck1_dvs;
break;
case BUCK2:
buck->gpio1 = devm_gpiod_get_index(dev, "dvs", 0, GPIOD_OUT_LOW);
if (IS_ERR(buck->gpio1))
return PTR_ERR(buck->gpio1);
gpiod_set_consumer_name(buck->gpio1, "LP8788_B2_DVS1");
buck->gpio2 = devm_gpiod_get_index(dev, "dvs", 1, GPIOD_OUT_LOW);
if (IS_ERR(buck->gpio2))
return PTR_ERR(buck->gpio2);
gpiod_set_consumer_name(buck->gpio2, "LP8788_B2_DVS2");
buck->dvs = pdata->buck2_dvs;
break;
default:
break;
}
return 0;
}
static int lp8788_init_dvs(struct platform_device *pdev,
struct lp8788_buck *buck, enum lp8788_buck_id id)
{
struct lp8788_platform_data *pdata = buck->lp->pdata;
u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M };
u8 val[] = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN };
u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C };
/* no dvs for buck3, 4 */
if (id > BUCK2)
return 0;
/* no dvs platform data, then dvs will be selected by I2C registers */
if (!pdata)
goto set_default_dvs_mode;
if ((id == BUCK1 && !pdata->buck1_dvs) ||
(id == BUCK2 && !pdata->buck2_dvs))
goto set_default_dvs_mode;
if (lp8788_dvs_gpio_request(pdev, buck, id))
goto set_default_dvs_mode;
return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
val[id]);
set_default_dvs_mode:
return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
default_dvs_mode[id]);
}
static int lp8788_buck_probe(struct platform_device *pdev)
{
struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
int id = pdev->id;
struct lp8788_buck *buck;
struct regulator_config cfg = { };
struct regulator_dev *rdev;
int ret;
if (id >= LP8788_NUM_BUCKS)
return -EINVAL;
buck = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_buck), GFP_KERNEL);
if (!buck)
return -ENOMEM;
buck->lp = lp;
ret = lp8788_init_dvs(pdev, buck, id);
if (ret)
return ret;
cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL;
cfg.driver_data = buck;
cfg.regmap = lp->regmap;
rdev = devm_regulator_register(&pdev->dev, &lp8788_buck_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(&pdev->dev, "BUCK%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
buck->regulator = rdev;
platform_set_drvdata(pdev, buck);
return 0;
}
static struct platform_driver lp8788_buck_driver = {
.probe = lp8788_buck_probe,
.driver = {
.name = LP8788_DEV_BUCK,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
static int __init lp8788_buck_init(void)
{
return platform_driver_register(&lp8788_buck_driver);
}
subsys_initcall(lp8788_buck_init);
static void __exit lp8788_buck_exit(void)
{
platform_driver_unregister(&lp8788_buck_driver);
}
module_exit(lp8788_buck_exit);
MODULE_DESCRIPTION("TI LP8788 BUCK Driver");
MODULE_AUTHOR("Milo Kim");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:lp8788-buck");