| /* |
| * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges) |
| * |
| * Copyright 2012 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| &board_lbc { |
| nor@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x01000000>; |
| bank-width = <2>; |
| device-width = <2>; |
| |
| partition@0 { |
| reg = <0x0 0x0b00000>; |
| label = "ramdisk-nor"; |
| }; |
| |
| partition@300000 { |
| reg = <0x0b00000 0x0400000>; |
| label = "kernel-nor"; |
| }; |
| |
| partition@700000 { |
| reg = <0x0f00000 0x060000>; |
| label = "dtb-nor"; |
| }; |
| |
| partition@760000 { |
| reg = <0x0f60000 0x020000>; |
| label = "env-nor"; |
| read-only; |
| }; |
| |
| partition@780000 { |
| reg = <0x0f80000 0x080000>; |
| label = "u-boot-nor"; |
| read-only; |
| }; |
| }; |
| |
| board-control@1,0 { |
| compatible = "fsl,mpc8548cds-fpga"; |
| reg = <0x1 0x0 0x1000>; |
| }; |
| }; |
| |
| &board_soc { |
| i2c@3000 { |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| |
| eeprom@56 { |
| compatible = "atmel,24c64"; |
| reg = <0x56>; |
| }; |
| |
| eeprom@57 { |
| compatible = "atmel,24c64"; |
| reg = <0x57>; |
| }; |
| }; |
| |
| i2c@3100 { |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| enet0: ethernet@24000 { |
| tbi-handle = <&tbi0>; |
| phy-handle = <&phy0>; |
| }; |
| |
| mdio@24520 { |
| phy0: ethernet-phy@0 { |
| interrupts = <5 1 0 0>; |
| reg = <0x0>; |
| device_type = "ethernet-phy"; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupts = <5 1 0 0>; |
| reg = <0x1>; |
| device_type = "ethernet-phy"; |
| }; |
| phy2: ethernet-phy@2 { |
| interrupts = <5 1 0 0>; |
| reg = <0x2>; |
| device_type = "ethernet-phy"; |
| }; |
| phy3: ethernet-phy@3 { |
| interrupts = <5 1 0 0>; |
| reg = <0x3>; |
| device_type = "ethernet-phy"; |
| }; |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| enet1: ethernet@25000 { |
| tbi-handle = <&tbi1>; |
| phy-handle = <&phy1>; |
| }; |
| |
| mdio@25520 { |
| tbi1: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| enet2: ethernet@26000 { |
| tbi-handle = <&tbi2>; |
| phy-handle = <&phy2>; |
| }; |
| |
| mdio@26520 { |
| tbi2: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| enet3: ethernet@27000 { |
| tbi-handle = <&tbi3>; |
| phy-handle = <&phy3>; |
| }; |
| |
| mdio@27520 { |
| tbi3: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| &board_pci0 { |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x4 (PCIX Slot 2) */ |
| 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 |
| 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 |
| 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 |
| 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 |
| |
| /* IDSEL 0x5 (PCIX Slot 3) */ |
| 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 |
| 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 |
| 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 |
| 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 |
| |
| /* IDSEL 0x6 (PCIX Slot 4) */ |
| 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 |
| 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 |
| 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 |
| 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 |
| |
| /* IDSEL 0x8 (PCIX Slot 5) */ |
| 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 |
| 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 |
| 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 |
| 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 |
| |
| /* IDSEL 0xC (Tsi310 bridge) */ |
| 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 |
| 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 |
| 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 |
| 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 |
| |
| /* IDSEL 0x14 (Slot 2) */ |
| 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 |
| 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 |
| 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 |
| 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 |
| |
| /* IDSEL 0x15 (Slot 3) */ |
| 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 |
| 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 |
| 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 |
| 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 |
| |
| /* IDSEL 0x16 (Slot 4) */ |
| 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 |
| 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 |
| 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 |
| 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 |
| |
| /* IDSEL 0x18 (Slot 5) */ |
| 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 |
| 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 |
| 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 |
| 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 |
| |
| /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ |
| 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 |
| 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 |
| 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 |
| 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; |
| |
| pci_bridge@1c { |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x00 (PrPMC Site) */ |
| 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 |
| 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 |
| 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 |
| 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 |
| |
| /* IDSEL 0x04 (VIA chip) */ |
| 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 |
| 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 |
| 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 |
| 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 |
| |
| /* IDSEL 0x05 (8139) */ |
| 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 |
| |
| /* IDSEL 0x06 (Slot 6) */ |
| 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 |
| 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 |
| 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 |
| 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 |
| |
| /* IDESL 0x07 (Slot 7) */ |
| 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 |
| 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 |
| 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 |
| 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; |
| |
| reg = <0xe000 0x0 0x0 0x0 0x0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| ranges = <0x2000000 0x0 0x80000000 |
| 0x2000000 0x0 0x80000000 |
| 0x0 0x20000000 |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x80000>; |
| clock-frequency = <33333333>; |
| |
| isa@4 { |
| device_type = "isa"; |
| #interrupt-cells = <2>; |
| #size-cells = <1>; |
| #address-cells = <2>; |
| reg = <0x2000 0x0 0x0 0x0 0x0>; |
| ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; |
| interrupt-parent = <&i8259>; |
| |
| i8259: interrupt-controller@20 { |
| interrupt-controller; |
| device_type = "interrupt-controller"; |
| reg = <0x1 0x20 0x2 |
| 0x1 0xa0 0x2 |
| 0x1 0x4d0 0x2>; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| compatible = "chrp,iic"; |
| interrupts = <0 1 0 0>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| rtc@70 { |
| compatible = "pnpPNP,b00"; |
| reg = <0x1 0x70 0x2>; |
| }; |
| }; |
| }; |
| }; |
