blob: 7bd31066399b5859a053570a35281cec23d1d888 [file] [log] [blame]
/*
* Google Gru-Kevin Rev 6+ board device tree source
*
* Copyright 2016-2017 Google, Inc
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "rk3399-gru.dtsi"
#include <dt-bindings/input/linux-event-codes.h>
/*
* Kevin-specific things
*
* Things in this section should use names from Kevin schematic since no
* equivalent exists in Gru schematic. If referring to signals that exist
* in Gru we use the Gru names, though. Confusing enough for you?
*/
/ {
model = "Google Kevin";
compatible = "google,kevin-rev15", "google,kevin-rev14",
"google,kevin-rev13", "google,kevin-rev12",
"google,kevin-rev11", "google,kevin-rev10",
"google,kevin-rev9", "google,kevin-rev8",
"google,kevin-rev7", "google,kevin-rev6",
"google,kevin", "google,gru", "rockchip,rk3399";
/* Power tree */
p3_3v_dig: p3-3v-dig {
compatible = "regulator-fixed";
regulator-name = "p3.3v_dig";
pinctrl-names = "default";
pinctrl-0 = <&cpu3_pen_pwr_en>;
enable-active-high;
gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
vin-supply = <&pp3300>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&cros_ec_pwm 1>;
brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52 53 54 55 56 57 58
59 60 61 62 63 64 65 66 67 68 69 70 71 72
73 74 75 76 77 78 79 80 81 82 83 84 85 86
87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
default-brightness-level = <51>;
enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
power-supply = <&pp3300_disp>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
pwm-delay-us = <10000>;
};
thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <25500>;
pulldown-ohm = <0>;
io-channels = <&saradc 2>;
#thermal-sensor-cells = <0>;
};
thermistor_ppvar_litcpu: thermistor-ppvar-litcpu {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <25500>;
pulldown-ohm = <0>;
io-channels = <&saradc 3>;
#thermal-sensor-cells = <0>;
};
};
&gpio_keys {
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <SW_PEN_INSERTED>;
linux,input-type = <EV_SW>;
wakeup-source;
};
};
&thermal_zones {
bigcpu_reg_thermal: bigcpu-reg-thermal {
polling-delay-passive = <100>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
thermal-sensors = <&thermistor_ppvar_bigcpu 0>;
sustainable-power = <4000>;
ppvar_bigcpu_trips: trips {
ppvar_bigcpu_on: ppvar-bigcpu-on {
temperature = <40000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
ppvar_bigcpu_alert: ppvar-bigcpu-alert {
temperature = <50000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
ppvar_bigcpu_crit: ppvar-bigcpu-crit {
temperature = <90000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&ppvar_bigcpu_alert>;
cooling-device =
<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <4096>;
};
map1 {
trip = <&ppvar_bigcpu_alert>;
cooling-device =
<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <1024>;
};
};
};
litcpu_reg_thermal: litcpu-reg-thermal {
polling-delay-passive = <100>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
thermal-sensors = <&thermistor_ppvar_litcpu 0>;
sustainable-power = <4000>;
ppvar_litcpu_trips: trips {
ppvar_litcpu_on: ppvar-litcpu-on {
temperature = <40000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
ppvar_litcpu_alert: ppvar-litcpu-alert {
temperature = <50000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
ppvar_litcpu_crit: ppvar-litcpu-crit {
temperature = <90000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
};
};
ap_i2c_tpm: &i2c0 {
status = "okay";
clock-frequency = <400000>;
/* These are relatively safe rise/fall times. */
i2c-scl-falling-time-ns = <50>;
i2c-scl-rising-time-ns = <300>;
tpm: tpm@20 {
compatible = "infineon,slb9645tt";
reg = <0x20>;
powered-while-suspended;
};
};
ap_i2c_dig: &i2c2 {
status = "okay";
clock-frequency = <400000>;
/* These are relatively safe rise/fall times. */
i2c-scl-falling-time-ns = <50>;
i2c-scl-rising-time-ns = <300>;
digitizer: digitizer@9 {
/* wacom,w9013 */
compatible = "hid-over-i2c";
reg = <0x9>;
pinctrl-names = "default";
pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>;
vdd-supply = <&p3_3v_dig>;
post-power-on-delay-ms = <100>;
interrupt-parent = <&gpio2>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
hid-descr-addr = <0x1>;
};
};
/* Adjustments to things in the gru baseboard */
&ap_i2c_tp {
trackpad@4a {
compatible = "atmel,atmel_mxt_tp";
reg = <0x4a>;
pinctrl-names = "default";
pinctrl-0 = <&trackpad_int_l>;
interrupt-parent = <&gpio1>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
};
};
&ap_i2c_ts {
touchscreen@4b {
compatible = "atmel,atmel_mxt_ts";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&touch_int_l>;
interrupt-parent = <&gpio3>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
};
};
&saradc {
status = "okay";
vref-supply = <&pp1800_ap_io>;
};
&mvl_wifi {
marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */
};
&pinctrl {
digitizer {
/* Has external pullup */
cpu1_dig_irq_l: cpu1-dig-irq-l {
rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
};
/* Has external pullup */
cpu1_dig_pdct_l: cpu1-dig-pdct-l {
rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
discrete-regulators {
cpu3_pen_pwr_en: cpu3-pen-pwr-en {
rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pen {
cpu1_pen_eject: cpu1-pen-eject {
rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
wifi {
wlan_host_wake_l: wlan-host-wake-l {
rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};