Merge tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert host bridge window patch that fixed HP EliteDesk 805 G6, but
broke ppc:sam460ex (Bjorn Helgaas)"
* tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Coalesce host bridge contiguous apertures"
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 97fb962..6423377 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -167,6 +167,7 @@
- description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
items:
- enum:
+ - bananapi,bpi-m5
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
- khadas,vim3l
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
index 812ae8c..230b80d 100644
--- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -18,6 +18,7 @@
- description: BCM2711 based Boards
items:
- enum:
+ - raspberrypi,400
- raspberrypi,4-model-b
- const: brcm,bcm2711
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index e3c50f2..1c827c1 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -197,6 +197,7 @@
- boundary,imx6q-nitrogen6x
- compulab,cm-fx6 # CompuLab CM-FX6
- dmo,imx6q-edmqmx6 # Data Modul eDM-QMX6 Board
+ - ds,imx6q-sbc # Da Sheng COM-9XX Modules
- embest,imx6q-marsboard # Embest MarS Board i.MX6Dual
- emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM
- emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base
@@ -400,6 +401,17 @@
- const: armadeus,imx6dl-apf6 # APF6 (Solo) SoM
- const: fsl,imx6dl
+ - description: i.MX6DL based congatec QMX6 Boards
+ items:
+ - enum:
+ - ge,imx6dl-b105v2 # General Electric B105v2
+ - ge,imx6dl-b105pv2 # General Electric B105Pv2
+ - ge,imx6dl-b125v2 # General Electric B125v2
+ - ge,imx6dl-b125pv2 # General Electric B125Pv2
+ - ge,imx6dl-b155v2 # General Electric B155v2
+ - const: congatec,qmx6
+ - const: fsl,imx6dl
+
- description: i.MX6DL based DFI FS700-M60-6DL Board
items:
- const: dfi,fs700-m60-6dl
@@ -685,6 +697,7 @@
- gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit
- gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit
- gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit
+ - gw,imx8mm-gw7901 # i.MX8MM Gateworks Board
- kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM
- variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module
- const: fsl,imx8mm
diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
index d72e92b..230bffe 100644
--- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
@@ -17,6 +17,7 @@
- items:
- enum:
- linksys,nslu2
+ - welltech,epbx100
- const: intel,ixp42x
- items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index aff57a8..80a05f6 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -122,6 +122,10 @@
- enum:
- mediatek,mt8195-evb
- const: mediatek,mt8195
+ - description: Google Burnet (HP Chromebook x360 11MK G3 EE)
+ items:
+ - const: google,burnet
+ - const: mediatek,mt8183
- description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
items:
- enum:
@@ -133,9 +137,19 @@
items:
- const: google,damu
- const: mediatek,mt8183
- - description: Google Juniper (Acer Chromebook Spin 311)
+ - description: Google Fennel (Lenovo IdeaPad 3 Chromebook)
items:
- - const: google,juniper-sku16
+ - enum:
+ - google,fennel-sku0
+ - google,fennel-sku1
+ - google,fennel-sku6
+ - const: google,fennel
+ - const: mediatek,mt8183
+ - description: Google Juniper (Acer Chromebook Spin 311) / Kenzo (Acer Chromebook 311)
+ items:
+ - enum:
+ - google,juniper-sku16
+ - google,juniper-sku17
- const: google,juniper
- const: mediatek,mt8183
- description: Google Kakadu (ASUS Chromebook Detachable CM3)
@@ -144,6 +158,10 @@
- const: google,kakadu-rev2
- const: google,kakadu
- const: mediatek,mt8183
+ - description: Google Kappa (HP Chromebook 11a)
+ items:
+ - const: google,kappa
+ - const: mediatek,mt8183
- description: Google Kodama (Lenovo 10e Chromebook Tablet)
items:
- enum:
@@ -153,6 +171,13 @@
- google,kodama-sku32
- const: google,kodama
- const: mediatek,mt8183
+ - description: Google Willow (Acer Chromebook 311 C722/C722T)
+ items:
+ - enum:
+ - google,willow-sku0
+ - google,willow-sku1
+ - const: google,willow
+ - const: mediatek,mt8183
- items:
- enum:
- mediatek,mt8183-pumpkin
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 9b27e99..9720b00 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -36,17 +36,20 @@
msm8992
msm8994
msm8996
+ sa8155p
sc7180
sc7280
sdm630
sdm660
sdm845
sdx55
+ sm8150
sm8250
sm8350
The 'board' element must be one of the following strings:
+ adp
cdp
cp01-c1
dragonboard
@@ -178,6 +181,7 @@
- items:
- enum:
- qcom,sc7280-idp
+ - google,senor
- const: qcom,sc7280
- items:
@@ -200,6 +204,16 @@
- items:
- enum:
+ - qcom,sa8155p-adp
+ - const: qcom,sa8155p
+
+ - items:
+ - enum:
+ - qcom,sm8150-mtp
+ - const: qcom,sm8150
+
+ - items:
+ - enum:
- qcom,qrb5165-rb5
- qcom,sm8250-mtp
- const: qcom,sm8250
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 5fd0696..a0cce4e 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -302,6 +302,24 @@
- renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
- const: renesas,r9a06g032
+ - description: RZ/G2UL (R9A07G043)
+ items:
+ - enum:
+ - renesas,r9a07g043u11 # RZ/G2UL Type-1
+ - renesas,r9a07g043u12 # RZ/G2UL Type-2
+ - const: renesas,r9a07g043
+
+ - description: RZ/G2{L,LC} (R9A07G044)
+ items:
+ - enum:
+ - renesas,smarc-evk # SMARC EVK
+ - enum:
+ - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC
+ - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC
+ - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L
+ - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L
+ - const: renesas,r9a07g044
+
additionalProperties: true
...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 4a6f772..6546b01 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -600,6 +600,11 @@
- const: zkmagic,a95x-z2
- const: rockchip,rk3318
+ - description: Rockchip RK3568 Evaluation board
+ items:
+ - const: rockchip,rk3568-evb1-v10
+ - const: rockchip,rk3568
+
additionalProperties: true
...
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
deleted file mode 100644
index 3ee9b42..0000000
--- a/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Rockchip power-management-unit:
--------------------------------
-
-The pmu is used to turn off and on different power domains of the SoCs
-This includes the power to the CPU cores.
-
-Required node properties:
-- compatible value : = "rockchip,rk3066-pmu";
-- reg : physical base address and the size of the registers window
-
-Example:
-
- pmu@20004000 {
- compatible = "rockchip,rk3066-pmu";
- reg = <0x20004000 0x100>;
- };
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
new file mode 100644
index 0000000..53115b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/rockchip/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Management Unit (PMU)
+
+maintainers:
+ - Elaine Zhang <zhangqing@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ The PMU is used to turn on and off different power domains of the SoCs.
+ This includes the power to the CPU cores.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-pmu
+ - rockchip,rk3066-pmu
+ - rockchip,rk3288-pmu
+ - rockchip,rk3399-pmu
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - rockchip,px30-pmu
+ - rockchip,rk3066-pmu
+ - rockchip,rk3288-pmu
+ - rockchip,rk3399-pmu
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: true
+
+examples:
+ - |
+ pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
+ reg = <0x20004000 0x100>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index ac75002..889128a 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -224,6 +224,12 @@
- const: empire-electronix,m712
- const: allwinner,sun5i-a13
+ - description: Forlinx OKA40i-C Development board
+ items:
+ - const: forlinx,oka40i-c
+ - const: forlinx,feta40i-c
+ - const: allwinner,sun8i-r40
+
- description: FriendlyARM NanoPi A64
items:
- const: friendlyarm,nanopi-a64
@@ -269,6 +275,11 @@
- const: friendlyarm,nanopi-r1
- const: allwinner,sun8i-h3
+ - description: FriendlyARM NanoPi R1S H5
+ items:
+ - const: friendlyarm,nanopi-r1s-h5
+ - const: allwinner,sun50i-h5
+
- description: FriendlyARM ZeroPi
items:
- const: friendlyarm,zeropi
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
index 43fd2f8..0afec83 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -301,6 +301,33 @@
additionalProperties: false
+ core-domain:
+ type: object
+ description: |
+ The vast majority of hardware blocks of Tegra SoC belong to a
+ Core power domain, which has a dedicated voltage rail that powers
+ the blocks.
+
+ properties:
+ operating-points-v2:
+ description:
+ Should contain level, voltages and opp-supported-hw property.
+ The supported-hw is a bitfield indicating SoC speedo or process
+ ID mask.
+
+ "#power-domain-cells":
+ const: 0
+
+ required:
+ - operating-points-v2
+ - "#power-domain-cells"
+
+ additionalProperties: false
+
+ core-supply:
+ description:
+ Phandle to voltage regulator connected to the SoC Core power rail.
+
required:
- compatible
- reg
@@ -325,6 +352,7 @@
tegra_pmc: pmc@7000e400 {
compatible = "nvidia,tegra210-pmc";
reg = <0x7000e400 0x400>;
+ core-supply = <®ulator>;
clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
#clock-cells = <1>;
@@ -338,17 +366,24 @@
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
+ pd_core: core-domain {
+ operating-points-v2 = <&core_opp_table>;
+ #power-domain-cells = <0>;
+ };
+
powergates {
pd_audio: aud {
clocks = <&tegra_car TEGRA210_CLK_APE>,
<&tegra_car TEGRA210_CLK_APB2APE>;
resets = <&tegra_car 198>;
+ power-domains = <&pd_core>;
#power-domain-cells = <0>;
};
pd_xusbss: xusba {
clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+ power-domains = <&pd_core>;
#power-domain-cells = <0>;
};
};
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
deleted file mode 100644
index ab730ea..0000000
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ /dev/null
@@ -1,313 +0,0 @@
-Broadcom iProc Family Clocks
-
-This binding uses the common clock binding:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The iProc clock controller manages clocks that are common to the iProc family.
-An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL,
-LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
-comprises of several leaf clocks
-
-Required properties for a PLL and its leaf clocks:
-
-- compatible:
- Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on
-Cygnus has a compatible string of "brcm,cygnus-genpll"
-
-- #clock-cells:
- Have a value of <1> since there are more than 1 leaf clock of a given PLL
-
-- reg:
- Define the base and range of the I/O address space that contain the iProc
-clock control registers required for the PLL
-
-- clocks:
- The input parent clock phandle for the PLL. For most iProc PLLs, this is an
-onboard crystal with a fixed rate
-
-- clock-output-names:
- An ordered list of strings defining the names of the clocks
-
-Example:
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- };
-
- genpll: genpll {
- #clock-cells = <1>;
- compatible = "brcm,cygnus-genpll";
- reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
- "enet_sw", "audio_125", "can";
- };
-
-Required properties for ASIU clocks:
-
-ASIU clocks are a special case. These clocks are derived directly from the
-reference clock of the onboard crystal
-
-- compatible:
- Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU
-clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk"
-
-- #clock-cells:
- Have a value of <1> since there are more than 1 ASIU clocks
-
-- reg:
- Define the base and range of the I/O address space that contain the iProc
-clock control registers required for ASIU clocks
-
-- clocks:
- The input parent clock phandle for the ASIU clock, i.e., the onboard
-crystal
-
-- clock-output-names:
- An ordered list of strings defining the names of the ASIU clocks
-
-Example:
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- };
-
- asiu_clks: asiu_clks {
- #clock-cells = <1>;
- compatible = "brcm,cygnus-asiu-clk";
- reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
- clocks = <&osc>;
- clock-output-names = "keypad", "adc/touch", "pwm";
- };
-
-Cygnus
-------
-PLL and leaf clock compatible strings for Cygnus are:
- "brcm,cygnus-armpll"
- "brcm,cygnus-genpll"
- "brcm,cygnus-lcpll0"
- "brcm,cygnus-mipipll"
- "brcm,cygnus-asiu-clk"
- "brcm,cygnus-audiopll"
-
-The following table defines the set of PLL/clock index and ID for Cygnus.
-These clock IDs are defined in:
- "include/dt-bindings/clock/bcm-cygnus.h"
-
- Clock Source (Parent) Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
-
- armpll crystal N/A N/A
-
- keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK
- adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK
- pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK
-
- genpll crystal 0 BCM_CYGNUS_GENPLL
- axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK
- 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK
- ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
- enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK
- audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK
- can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK
-
- lcpll0 crystal 0 BCM_CYGNUS_LCPLL0
- pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
- ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
- sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK
- usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
- smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
- ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED
-
- mipipll crystal 0 BCM_CYGNUS_MIPIPLL
- ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED
- ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD
- ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D
- ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED
- ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
- ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED
-
- audiopll crystal 0 BCM_CYGNUS_AUDIOPLL
- ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0
- ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1
- ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2
-
-Hurricane 2
-------
-PLL and leaf clock compatible strings for Hurricane 2 are:
- "brcm,hr2-armpll"
-
-The following table defines the set of PLL/clock for Hurricane 2:
-
- Clock Source Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
-
- armpll crystal N/A N/A
-
-
-Northstar and Northstar Plus
-------
-PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
- "brcm,nsp-armpll"
- "brcm,nsp-genpll"
- "brcm,nsp-lcpll0"
-
-The following table defines the set of PLL/clock index and ID for Northstar and
-Northstar Plus. These clock IDs are defined in:
- "include/dt-bindings/clock/bcm-nsp.h"
-
- Clock Source Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
-
- armpll crystal N/A N/A
-
- genpll crystal 0 BCM_NSP_GENPLL
- phy genpll 1 BCM_NSP_GENPLL_PHY_CLK
- ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK
- usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK
- iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK
- sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK
- sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK
-
- lcpll0 crystal 0 BCM_NSP_LCPLL0
- pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
- sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK
- ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK
-
-Northstar 2
------------
-PLL and leaf clock compatible strings for Northstar 2 are:
- "brcm,ns2-genpll-scr"
- "brcm,ns2-genpll-sw"
- "brcm,ns2-lcpll-ddr"
- "brcm,ns2-lcpll-ports"
-
-The following table defines the set of PLL/clock index and ID for Northstar 2.
-These clock IDs are defined in:
- "include/dt-bindings/clock/bcm-ns2.h"
-
- Clock Source Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
-
- genpll_scr crystal 0 BCM_NS2_GENPLL_SCR
- scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK
- fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK
- audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK
- ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED
- ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED
- ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED
-
- genpll_sw crystal 0 BCM_NS2_GENPLL_SW
- rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK
- 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK
- nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK
- chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK
- port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK
- sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK
-
- lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR
- pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
- ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK
- ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED
- ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED
- ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED
- ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED
-
- lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS
- wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK
- rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK
- ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED
- ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
- ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
- ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
-
-BCM63138
---------
-PLL and leaf clock compatible strings for BCM63138 are:
- "brcm,bcm63138-armpll"
-
-Stingray
------------
-PLL and leaf clock compatible strings for Stingray are:
- "brcm,sr-genpll0"
- "brcm,sr-genpll1"
- "brcm,sr-genpll2"
- "brcm,sr-genpll3"
- "brcm,sr-genpll4"
- "brcm,sr-genpll5"
- "brcm,sr-genpll6"
-
- "brcm,sr-lcpll0"
- "brcm,sr-lcpll1"
- "brcm,sr-lcpll-pcie"
-
-
-The following table defines the set of PLL/clock index and ID for Stingray.
-These clock IDs are defined in:
- "include/dt-bindings/clock/bcm-sr.h"
-
- Clock Source Index ID
- --- ----- ----- ---------
- crystal N/A N/A N/A
- crmu_ref25m crystal N/A N/A
-
- genpll0 crystal 0 BCM_SR_GENPLL0
- clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK
- clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK
- clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK
- clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK
- clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
- clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK
-
- genpll1 crystal 0 BCM_SR_GENPLL1
- clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK
- clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK
-
- genpll2 crystal 0 BCM_SR_GENPLL2
- clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK
- clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK
- clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK
- clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK
- clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK
- clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK
-
- genpll3 crystal 0 BCM_SR_GENPLL3
- clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK
- clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK
-
- genpll4 crystal 0 BCM_SR_GENPLL4
- clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK
- clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK
- clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK
- clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK
- clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
-
- genpll5 crystal 0 BCM_SR_GENPLL5
- clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK
- clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK
- clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK
-
- genpll6 crystal 0 BCM_SR_GENPLL6
- clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK
-
- lcpll0 crystal 0 BCM_SR_LCPLL0
- clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK
- clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK
- clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK
- clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK
-
- lcpll1 crystal 0 BCM_SR_LCPLL1
- clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK
- clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK
- clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK
-
- lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE
- clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
new file mode 100644
index 0000000..8dc7b40
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
@@ -0,0 +1,395 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc Family Clocks
+
+maintainers:
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
+
+description: |
+ The iProc clock controller manages clocks that are common to the iProc family.
+ An SoC from the iProc family may have several PLLs, e.g., ARMPLL, GENPLL,
+ LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
+ comprises of several leaf clocks
+
+ ASIU clocks are a special case. These clocks are derived directly from the
+ reference clock of the onboard crystal.
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm63138-armpll
+ - brcm,cygnus-armpll
+ - brcm,cygnus-genpll
+ - brcm,cygnus-lcpll0
+ - brcm,cygnus-mipipll
+ - brcm,cygnus-asiu-clk
+ - brcm,cygnus-audiopll
+ - brcm,hr2-armpll
+ - brcm,nsp-armpll
+ - brcm,nsp-genpll
+ - brcm,nsp-lcpll0
+ - brcm,ns2-genpll-scr
+ - brcm,ns2-genpll-sw
+ - brcm,ns2-lcpll-ddr
+ - brcm,ns2-lcpll-ports
+ - brcm,sr-genpll0
+ - brcm,sr-genpll1
+ - brcm,sr-genpll2
+ - brcm,sr-genpll3
+ - brcm,sr-genpll4
+ - brcm,sr-genpll5
+ - brcm,sr-genpll6
+ - brcm,sr-lcpll0
+ - brcm,sr-lcpll1
+ - brcm,sr-lcpll-pcie
+
+ reg:
+ minItems: 1
+ maxItems: 3
+ items:
+ - description: base register
+ - description: power register
+ - description: ASIU or split status register
+
+ clocks:
+ description: The input parent clock phandle for the PLL / ASIU clock. For
+ most iProc PLLs, this is an onboard crystal with a fixed rate.
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 45
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,cygnus-armpll
+ - brcm,cygnus-genpll
+ - brcm,cygnus-lcpll0
+ - brcm,cygnus-mipipll
+ - brcm,cygnus-asiu-clk
+ - brcm,cygnus-audiopll
+ then:
+ properties:
+ clock-output-names:
+ description: |
+ The following table defines the set of PLL/clock index and ID for Cygnus.
+ These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-cygnus.h"
+
+ Clock Source (Parent) Index ID
+ ----- --------------- ----- --
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+
+ keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK
+ adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK
+ pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK
+
+ genpll crystal 0 BCM_CYGNUS_GENPLL
+ axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK
+ 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK
+ ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
+ enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK
+ audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK
+ can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK
+
+ lcpll0 crystal 0 BCM_CYGNUS_LCPLL0
+ pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
+ ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
+ sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK
+ usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
+ smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
+ ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED
+
+ mipipll crystal 0 BCM_CYGNUS_MIPIPLL
+ ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED
+ ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD
+ ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D
+ ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED
+ ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
+ ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED
+
+ audiopll crystal 0 BCM_CYGNUS_AUDIOPLL
+ ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0
+ ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1
+ ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,hr2-armpll
+ then:
+ properties:
+ clock-output-names:
+ description: |
+ The following table defines the set of PLL/clock for Hurricane 2:
+
+ Clock Source Index ID
+ ----- ------ ----- --
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,nsp-armpll
+ - brcm,nsp-genpll
+ - brcm,nsp-lcpll0
+ then:
+ properties:
+ clock-output-names:
+ description: |
+ The following table defines the set of PLL/clock index and ID for Northstar and
+ Northstar Plus. These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-nsp.h"
+
+ Clock Source Index ID
+ ----- ------ ----- --
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+
+ genpll crystal 0 BCM_NSP_GENPLL
+ phy genpll 1 BCM_NSP_GENPLL_PHY_CLK
+ ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK
+ usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK
+ iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK
+ sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK
+ sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK
+
+ lcpll0 crystal 0 BCM_NSP_LCPLL0
+ pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
+ sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK
+ ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,ns2-genpll-scr
+ - brcm,ns2-genpll-sw
+ - brcm,ns2-lcpll-ddr
+ - brcm,ns2-lcpll-ports
+ then:
+ properties:
+ clock-output-names:
+ description: |
+ The following table defines the set of PLL/clock index and ID for Northstar 2.
+ These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-ns2.h"
+
+ Clock Source Index ID
+ ----- ------ ----- --
+ crystal N/A N/A N/A
+
+ genpll_scr crystal 0 BCM_NS2_GENPLL_SCR
+ scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK
+ fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK
+ audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK
+ ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED
+ ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED
+ ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED
+
+ genpll_sw crystal 0 BCM_NS2_GENPLL_SW
+ rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK
+ 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK
+ nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK
+ chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK
+ port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK
+ sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK
+
+ lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR
+ pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
+ ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK
+ ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED
+ ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED
+ ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED
+ ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED
+
+ lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS
+ wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK
+ rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK
+ ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED
+ ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
+ ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
+ ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,sr-genpll0
+ - brcm,sr-genpll1
+ - brcm,sr-genpll2
+ - brcm,sr-genpll3
+ - brcm,sr-genpll4
+ - brcm,sr-genpll5
+ - brcm,sr-genpll6
+ - brcm,sr-lcpll0
+ - brcm,sr-lcpll1
+ - brcm,sr-lcpll-pcie
+ then:
+ properties:
+ clock-output-names:
+ description: |
+ The following table defines the set of PLL/clock index and ID for Stingray.
+ These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-sr.h"
+
+ Clock Source Index ID
+ ----- ------ ----- --
+ crystal N/A N/A N/A
+ crmu_ref25m crystal N/A N/A
+
+ genpll0 crystal 0 BCM_SR_GENPLL0
+ clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK
+ clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK
+ clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK
+ clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK
+ clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+ clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+ genpll1 crystal 0 BCM_SR_GENPLL1
+ clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK
+ clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK
+
+ genpll2 crystal 0 BCM_SR_GENPLL2
+ clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK
+ clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK
+ clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK
+ clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK
+ clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK
+ clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK
+
+ genpll3 crystal 0 BCM_SR_GENPLL3
+ clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK
+ clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK
+
+ genpll4 crystal 0 BCM_SR_GENPLL4
+ clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK
+ clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK
+ clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK
+ clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK
+ clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+ genpll5 crystal 0 BCM_SR_GENPLL5
+ clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK
+ clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK
+ clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK
+
+ genpll6 crystal 0 BCM_SR_GENPLL6
+ clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK
+
+ lcpll0 crystal 0 BCM_SR_LCPLL0
+ clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK
+ clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK
+ clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK
+ clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK
+
+ lcpll1 crystal 0 BCM_SR_LCPLL1
+ clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK
+ clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK
+ clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK
+
+ lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE
+ clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,cygnus-genpll
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: genpll
+ - const: axi21
+ - const: 250mhz
+ - const: ihost_sys
+ - const: enet_sw
+ - const: audio_125
+ - const: can
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,nsp-lcpll0
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: lcpll0
+ - const: pcie_phy
+ - const: sdio
+ - const: ddr_phy
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,nsp-genpll
+ then:
+ properties:
+ clock-output-names:
+ items:
+ - const: genpll
+ - const: phy
+ - const: ethernetclk
+ - const: usbclk
+ - const: iprocfast
+ - const: sata1
+ - const: sata2
+
+required:
+ - reg
+ - clocks
+ - '#clock-cells'
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ osc1: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ genpll@301d000 {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-genpll";
+ reg = <0x301d000 0x2c>, <0x301c020 0x4>;
+ clocks = <&os1c>;
+ clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+ "enet_sw", "audio_125", "can";
+ };
+ - |
+ osc2: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ asiu_clks@301d048 {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-asiu-clk";
+ reg = <0x301d048 0xc>, <0x180aa024 0x4>;
+ clocks = <&osc2>;
+ clock-output-names = "keypad", "adc/touch", "pwm";
+ };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
deleted file mode 100644
index 9acea9d..0000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra114 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra114-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
- the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
- In clock consumers, this cell represents the clock ID exposed by the
- CAR. The assignments may be found in header file
- <dt-bindings/clock/tegra114-car.h>.
-- #reset-cells : Should be 1.
- In clock consumers, this cell represents the bit number in the CAR's
- array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
- tegra_car: clock {
- compatible = "nvidia,tegra114-car";
- reg = <0x60006000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- usb@c5004000 {
- clocks = <&tegra_car TEGRA114_CLK_USB2>;
- };
-};
-
-Example board file:
-
-/ {
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <12000000>;
- };
-
- clk_32k: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- &tegra_car {
- clocks = <&clk_32k> <&osc>;
- };
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
deleted file mode 100644
index 7f02fb4..0000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
- the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
- In clock consumers, this cell represents the clock ID exposed by the
- CAR. The assignments may be found in the header files
- <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
- to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
- (for Tegra124-specific clocks).
-- #reset-cells : Should be 1.
- In clock consumers, this cell represents the bit number in the CAR's
- array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-- nvidia,external-memory-controller : phandle of the EMC driver.
-
-The node should contain a "emc-timings" subnode for each supported RAM type (see
-field RAM_CODE in register PMC_STRAPPING_OPT_A).
-
-Required properties for "emc-timings" nodes :
-- nvidia,ram-code : Should contain the value of RAM_CODE this timing set
- is used for.
-
-Each "emc-timings" node should contain a "timing" subnode for every supported
-EMC clock rate.
-
-Required properties for "timing" nodes :
-- clock-frequency : Should contain the memory clock rate to which this timing
-relates.
-- nvidia,parent-clock-frequency : Should contain the rate at which the current
-parent of the EMC clock should be running at this timing.
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
- - emc-parent : the clock that should be the parent of the EMC clock at this
-timing.
-
-Example SoC include file:
-
-/ {
- tegra_car: clock@60006000 {
- compatible = "nvidia,tegra124-car";
- reg = <0x60006000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- nvidia,external-memory-controller = <&emc>;
- };
-
- usb@c5004000 {
- clocks = <&tegra_car TEGRA124_CLK_USB2>;
- };
-};
-
-Example board file:
-
-/ {
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <112400000>;
- };
-
- clk_32k: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- &tegra_car {
- clocks = <&clk_32k> <&osc>;
- };
-
- clock@60006000 {
- emc-timings-3 {
- nvidia,ram-code = <3>;
-
- timing-12750000 {
- clock-frequency = <12750000>;
- nvidia,parent-clock-frequency = <408000000>;
- clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
- clock-names = "emc-parent";
- };
- timing-20400000 {
- clock-frequency = <20400000>;
- nvidia,parent-clock-frequency = <408000000>;
- clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
- clock-names = "emc-parent";
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
new file mode 100644
index 0000000..ec7ab14
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra124-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+ The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+ Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+ CLKGEN provides the registers to program the PLLs. It controls most of
+ the clock source programming and most of the clock dividers.
+
+ CLKGEN input signals include the external clock for the reference frequency
+ (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+ Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+ RSTGEN provides the registers needed to control resetting of each block in
+ the Tegra system.
+
+properties:
+ compatible:
+ const: nvidia,tegra124-car
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ nvidia,external-memory-controller:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle of the external memory controller node
+
+patternProperties:
+ "^emc-timings-[0-9]+$":
+ type: object
+ properties:
+ nvidia,ram-code:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+ this timing set is used for
+
+ patternProperties:
+ "^timing-[0-9]+$":
+ type: object
+ properties:
+ clock-frequency:
+ description:
+ external memory clock rate in Hz
+ minimum: 1000000
+ maximum: 1000000000
+
+ nvidia,parent-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ rate of parent clock in Hz
+ minimum: 1000000
+ maximum: 1000000000
+
+ clocks:
+ items:
+ - description: parent clock of EMC
+
+ clock-names:
+ items:
+ - const: emc-parent
+
+ required:
+ - clock-frequency
+ - nvidia,parent-clock-frequency
+ - clocks
+ - clock-names
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra124-car.h>
+
+ car: clock-controller@60006000 {
+ compatible = "nvidia,tegra124-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb-controller@c5004000 {
+ compatible = "nvidia,tegra20-ehci";
+ reg = <0xc5004000 0x4000>;
+ clocks = <&car TEGRA124_CLK_USB2>;
+ resets = <&car TEGRA124_CLK_USB2>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
deleted file mode 100644
index 6c5901b..0000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra20 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra20-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
- the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
- In clock consumers, this cell represents the clock ID exposed by the
- CAR. The assignments may be found in header file
- <dt-bindings/clock/tegra20-car.h>.
-- #reset-cells : Should be 1.
- In clock consumers, this cell represents the bit number in the CAR's
- array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
- tegra_car: clock {
- compatible = "nvidia,tegra20-car";
- reg = <0x60006000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- usb@c5004000 {
- clocks = <&tegra_car TEGRA20_CLK_USB2>;
- };
-};
-
-Example board file:
-
-/ {
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <12000000>;
- };
-
- clk_32k: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- &tegra_car {
- clocks = <&clk_32k> <&osc>;
- };
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
new file mode 100644
index 0000000..459d2a52
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+ The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+ Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+ CLKGEN provides the registers to program the PLLs. It controls most of
+ the clock source programming and most of the clock dividers.
+
+ CLKGEN input signals include the external clock for the reference frequency
+ (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+ Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+ RSTGEN provides the registers needed to control resetting of each block in
+ the Tegra system.
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra20-car
+ - nvidia,tegra30-car
+ - nvidia,tegra114-car
+ - nvidia,tegra210-car
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+
+ car: clock-controller@60006000 {
+ compatible = "nvidia,tegra20-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb-controller@c5004000 {
+ compatible = "nvidia,tegra20-ehci";
+ reg = <0xc5004000 0x4000>;
+ clocks = <&car TEGRA20_CLK_USB2>;
+ resets = <&car TEGRA20_CLK_USB2>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
deleted file mode 100644
index 26f237f..0000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-NVIDIA Tegra210 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra210-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
- the 32 KHz "32k_in".
-- #clock-cells : Should be 1.
- In clock consumers, this cell represents the clock ID exposed by the
- CAR. The assignments may be found in header file
- <dt-bindings/clock/tegra210-car.h>.
-- #reset-cells : Should be 1.
- In clock consumers, this cell represents the bit number in the CAR's
- array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
- tegra_car: clock {
- compatible = "nvidia,tegra210-car";
- reg = <0x60006000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- usb@c5004000 {
- clocks = <&tegra_car TEGRA210_CLK_USB2>;
- };
-};
-
-Example board file:
-
-/ {
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk_32k: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- &tegra_car {
- clocks = <&clk_32k>;
- };
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
deleted file mode 100644
index 63618cd..0000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra30 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra30-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
- the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
- In clock consumers, this cell represents the clock ID exposed by the
- CAR. The assignments may be found in header file
- <dt-bindings/clock/tegra30-car.h>.
-- #reset-cells : Should be 1.
- In clock consumers, this cell represents the bit number in the CAR's
- array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
- tegra_car: clock {
- compatible = "nvidia,tegra30-car";
- reg = <0x60006000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- usb@c5004000 {
- clocks = <&tegra_car TEGRA30_CLK_USB2>;
- };
-};
-
-Example board file:
-
-/ {
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <12000000>;
- };
-
- clk_32k: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- &tegra_car {
- clocks = <&clk_32k> <&osc>;
- };
-};
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index e747d73..a7333ad 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -12,6 +12,7 @@
* "qcom,scm-ipq4019"
* "qcom,scm-ipq806x"
* "qcom,scm-ipq8074"
+ * "qcom,scm-mdm9607"
* "qcom,scm-msm8660"
* "qcom,scm-msm8916"
* "qcom,scm-msm8960"
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index 96c914e..2015f50 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -73,7 +73,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
wm8731: wm8731@1a {
compatible = "wm8731";
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 9d27aa5..1181b59 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -54,8 +54,14 @@
- const: arm,mmu-500
- description: NVIDIA SoCs that program two ARM MMU-500s identically
items:
+ - description: NVIDIA SoCs that require memory controller interaction
+ and may program multiple ARM MMU-500s identically with the memory
+ controller interleaving translations between multiple instances
+ for improved performance.
+ items:
- enum:
- - nvidia,tegra194-smmu
+ - const: nvidia,tegra194-smmu
+ - const: nvidia,tegra186-smmu
- const: nvidia,smmu-500
- items:
- const: arm,mmu-500
@@ -165,10 +171,11 @@
contains:
enum:
- nvidia,tegra194-smmu
+ - nvidia,tegra186-smmu
then:
properties:
reg:
- minItems: 2
+ minItems: 1
maxItems: 2
else:
properties:
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index 19c7bd48..d3f05d5 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -52,10 +52,11 @@
- description: MAC RX clock
- description: For MPU family, used for power mode
- description: For MPU family, used for PHY without quartz
+ - description: PTP clock
clock-names:
minItems: 3
- maxItems: 5
+ maxItems: 6
contains:
enum:
- stmmaceth
@@ -63,6 +64,7 @@
- mac-clk-rx
- ethstp
- eth-ck
+ - ptp_ref
st,syscon:
$ref: "/schemas/types.yaml#/definitions/phandle-array"
diff --git a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
new file mode 100644
index 0000000..debfb54
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx PCI controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: PCI host controller found in the Intel IXP4xx SoC series.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - intel,ixp42x-pci
+ - intel,ixp43x-pci
+ description: The two supported variants are ixp42x and ixp43x,
+ though more variants may exist.
+
+ reg:
+ items:
+ - description: IXP4xx-specific registers
+
+ interrupts:
+ items:
+ - description: Main PCI interrupt
+ - description: PCI DMA interrupt 1
+ - description: PCI DMA interrupt 2
+
+ ranges:
+ maxItems: 2
+ description: Typically one memory range of 64MB and one IO
+ space range of 64KB.
+
+ dma-ranges:
+ maxItems: 1
+ description: The DMA range tells the PCI host which addresses
+ the RAM is at. It can map only 64MB so if the RAM is bigger
+ than 64MB the DMA access has to be restricted to these
+ addresses.
+
+ "#interrupt-cells": true
+
+ interrupt-map: true
+
+ interrupt-map-mask:
+ items:
+ - const: 0xf800
+ - const: 0
+ - const: 0
+ - const: 7
+
+required:
+ - compatible
+ - reg
+ - dma-ranges
+ - "#interrupt-cells"
+ - interrupt-map
+ - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pci@c0000000 {
+ compatible = "intel,ixp43x-pci";
+ reg = <0xc0000000 0x1000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+ <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+ dma-ranges =
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
+ <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+ <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 3>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
index 8c60e69..5ffd0f5 100644
--- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
@@ -42,22 +42,22 @@
Examples:
- cpm_comphy: phy@120000 {
+ CP11X_LABEL(comphy): phy@120000 {
compatible = "marvell,comphy-cp110";
reg = <0x120000 0x6000>;
- marvell,system-controller = <&cpm_syscon0>;
- clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
- <&CP110_LABEL(clk) 1 18>;
+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+ clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+ <&CP11X_LABEL(clk) 1 18>;
clock-names = "mg_clk", "mg_core_clk", "axi_clk";
#address-cells = <1>;
#size-cells = <0>;
- cpm_comphy0: phy@0 {
+ CP11X_LABEL(comphy0): phy@0 {
reg = <0>;
#phy-cells = <1>;
};
- cpm_comphy1: phy@1 {
+ CP11X_LABEL(comphy1): phy@1 {
reg = <1>;
#phy-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
index a5b027a6..5bebd86 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -30,9 +30,6 @@
"#clock-cells":
const: 0
- "#phy-cells":
- const: 0
-
clocks:
maxItems: 1
@@ -120,7 +117,6 @@
- reg
- clock-output-names
- "#clock-cells"
- - "#phy-cells"
- host-port
- otg-port
@@ -131,26 +127,25 @@
#include <dt-bindings/clock/rk3399-cru.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
- u2phy0: usb2-phy@e450 {
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
clock-names = "phyclk";
clock-output-names = "clk_usbphy0_480m";
#clock-cells = <0>;
- #phy-cells = <0>;
u2phy0_host: host-port {
- #phy-cells = <0>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "linestate";
+ #phy-cells = <0>;
};
u2phy0_otg: otg-port {
- #phy-cells = <0>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "otg-bvalid", "otg-id", "linestate";
+ #phy-cells = <0>;
};
};
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
index a96e6db..01bdda1 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@@ -25,7 +25,9 @@
compatible:
enum:
- fsl,imx7d-gpc
+ - fsl,imx8mn-gpc
- fsl,imx8mq-gpc
+ - fsl,imx8mm-gpc
reg:
maxItems: 1
@@ -54,6 +56,7 @@
Power domain index. Valid values are defined in
include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
+ include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc
maxItems: 1
clocks:
@@ -66,6 +69,16 @@
power-supply: true
+ resets:
+ description: |
+ A number of phandles to resets that need to be asserted during
+ power-up sequencing of the domain. The resets belong to devices
+ located inside the power domain, which need to be held in reset
+ across the power-up sequence. So no means to specify what each
+ reset is in a generic power-domain binding.
+ minItems: 1
+ maxItems: 4
+
required:
- '#power-domain-cells'
- reg
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index ff21bfe..4807b56 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -16,6 +16,7 @@
properties:
compatible:
enum:
+ - qcom,mdm9607-rpmpd
- qcom,msm8916-rpmpd
- qcom,msm8939-rpmpd
- qcom,msm8976-rpmpd
@@ -26,6 +27,7 @@
- qcom,sdm660-rpmpd
- qcom,sc7180-rpmhpd
- qcom,sc7280-rpmhpd
+ - qcom,sc8180x-rpmhpd
- qcom,sdm845-rpmhpd
- qcom,sdx55-rpmhpd
- qcom,sm8150-rpmhpd
diff --git a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml
new file mode 100644
index 0000000..84ddc77
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas RZ/G2L System Controller (SYSC)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The RZ/G2L System Controller (SYSC) performs system control of the LSI and
+ supports following functions,
+ - External terminal state capture function
+ - 34-bit address space access function
+ - Low power consumption control
+ - WDT stop control
+
+properties:
+ compatible:
+ enum:
+ - renesas,r9a07g044-sysc # RZ/G2{L,LC}
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: CA55/CM33 Sleep/Software Standby Mode request interrupt
+ - description: CA55 Software Standby Mode release request interrupt
+ - description: CM33 Software Standby Mode release request interrupt
+ - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt
+
+ interrupt-names:
+ items:
+ - const: lpm_int
+ - const: ca55stbydone_int
+ - const: cm33stbyr_int
+ - const: ca55_deny
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ sysc: system-controller@11020000 {
+ compatible = "renesas,r9a07g044-sysc";
+ reg = <0x11020000 0x10000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int",
+ "ca55_deny";
+ };
diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
new file mode 100644
index 0000000..9b9d710
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -0,0 +1,248 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Domains
+
+maintainers:
+ - Elaine Zhang <zhangqing@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ Rockchip processors include support for multiple power domains
+ which can be powered up/down by software based on different
+ application scenarios to save power.
+
+ Power domains contained within power-controller node are
+ generic power domain providers documented in
+ Documentation/devicetree/bindings/power/power-domain.yaml.
+
+ IP cores belonging to a power domain should contain a
+ "power-domains" property that is a phandle for the
+ power domain node representing the domain.
+
+properties:
+ $nodename:
+ const: power-controller
+
+ compatible:
+ enum:
+ - rockchip,px30-power-controller
+ - rockchip,rk3036-power-controller
+ - rockchip,rk3066-power-controller
+ - rockchip,rk3128-power-controller
+ - rockchip,rk3188-power-controller
+ - rockchip,rk3228-power-controller
+ - rockchip,rk3288-power-controller
+ - rockchip,rk3328-power-controller
+ - rockchip,rk3366-power-controller
+ - rockchip,rk3368-power-controller
+ - rockchip,rk3399-power-controller
+ - rockchip,rk3568-power-controller
+
+ "#power-domain-cells":
+ const: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#power-domain-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "^power-domain@[0-9a-f]+$":
+
+ $ref: "#/$defs/pd-node"
+
+ unevaluatedProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+
+ $ref: "#/$defs/pd-node"
+
+ unevaluatedProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+
+ $ref: "#/$defs/pd-node"
+
+ unevaluatedProperties: false
+
+ properties:
+ "#power-domain-cells":
+ const: 0
+
+$defs:
+ pd-node:
+ type: object
+ description: |
+ Represents the power domains within the power controller node.
+
+ properties:
+ reg:
+ maxItems: 1
+ description: |
+ Power domain index. Valid values are defined in
+ "include/dt-bindings/power/px30-power.h"
+ "include/dt-bindings/power/rk3036-power.h"
+ "include/dt-bindings/power/rk3066-power.h"
+ "include/dt-bindings/power/rk3128-power.h"
+ "include/dt-bindings/power/rk3188-power.h"
+ "include/dt-bindings/power/rk3228-power.h"
+ "include/dt-bindings/power/rk3288-power.h"
+ "include/dt-bindings/power/rk3328-power.h"
+ "include/dt-bindings/power/rk3366-power.h"
+ "include/dt-bindings/power/rk3368-power.h"
+ "include/dt-bindings/power/rk3399-power.h"
+ "include/dt-bindings/power/rk3568-power.h"
+
+ clocks:
+ minItems: 1
+ maxItems: 30
+ description: |
+ A number of phandles to clocks that need to be enabled
+ while power domain switches state.
+
+ pm_qos:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ A number of phandles to qos blocks which need to be saved and restored
+ while power domain switches state.
+
+ "#power-domain-cells":
+ enum: [0, 1]
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ required:
+ - reg
+ - "#power-domain-cells"
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3399-cru.h>
+ #include <dt-bindings/power/rk3399-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ qos_hdcp: qos@ffa90000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa90000 0x0 0x20>;
+ };
+
+ qos_iep: qos@ffa98000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa98000 0x0 0x20>;
+ };
+
+ qos_rga_r: qos@ffab0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab0000 0x0 0x20>;
+ };
+
+ qos_rga_w: qos@ffab0080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab0080 0x0 0x20>;
+ };
+
+ qos_video_m0: qos@ffab8000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab8000 0x0 0x20>;
+ };
+
+ qos_video_m1_r: qos@ffac0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac0000 0x0 0x20>;
+ };
+
+ qos_video_m1_w: qos@ffac0080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac0080 0x0 0x20>;
+ };
+
+ power-management@ff310000 {
+ compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xff310000 0x0 0x1000>;
+
+ power-controller {
+ compatible = "rockchip,rk3399-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_CENTER */
+ power-domain@RK3399_PD_IEP {
+ reg = <RK3399_PD_IEP>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru HCLK_IEP>;
+ pm_qos = <&qos_iep>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_RGA {
+ reg = <RK3399_PD_RGA>;
+ clocks = <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>;
+ pm_qos = <&qos_rga_r>,
+ <&qos_rga_w>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VCODEC {
+ reg = <RK3399_PD_VCODEC>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ pm_qos = <&qos_video_m0>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VDU {
+ reg = <RK3399_PD_VDU>;
+ clocks = <&cru ACLK_VDU>,
+ <&cru HCLK_VDU>;
+ pm_qos = <&qos_video_m1_r>,
+ <&qos_video_m1_w>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VIO {
+ reg = <RK3399_PD_VIO>;
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3399_PD_HDCP {
+ reg = <RK3399_PD_HDCP>;
+ clocks = <&cru ACLK_HDCP>,
+ <&cru HCLK_HDCP>,
+ <&cru PCLK_HDCP>;
+ pm_qos = <&qos_hdcp>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
index 54a7700..800d511 100644
--- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -25,6 +25,9 @@
- const: allwinner,sun8i-a83t-pwm
- const: allwinner,sun8i-h3-pwm
- items:
+ - const: allwinner,sun8i-v3s-pwm
+ - const: allwinner,sun7i-a20-pwm
+ - items:
- const: allwinner,sun50i-a64-pwm
- const: allwinner,sun5i-a13-pwm
- items:
diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
new file mode 100644
index 0000000..370579a
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/microchip,rst.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip Sparx5 Switch Reset Controller
+
+maintainers:
+ - Steen Hegelund <steen.hegelund@microchip.com>
+ - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+ The Microchip Sparx5 Switch provides reset control and implements the following
+ functions
+ - One Time Switch Core Reset (Soft Reset)
+
+properties:
+ $nodename:
+ pattern: "^reset-controller@[0-9a-f]+$"
+
+ compatible:
+ const: microchip,sparx5-switch-reset
+
+ reg:
+ items:
+ - description: global control block registers
+
+ reg-names:
+ items:
+ - const: gcb
+
+ "#reset-cells":
+ const: 1
+
+ cpu-syscon:
+ $ref: "/schemas/types.yaml#/definitions/phandle"
+ description: syscon used to access CPU reset
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - "#reset-cells"
+ - cpu-syscon
+
+additionalProperties: false
+
+examples:
+ - |
+ reset: reset-controller@11010008 {
+ compatible = "microchip,sparx5-switch-reset";
+ reg = <0x11010008 0x4>;
+ reg-names = "gcb";
+ #reset-cells = <1>;
+ cpu-syscon = <&cpu_ctrl>;
+ };
+
diff --git a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
new file mode 100644
index 0000000..61963fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/intel,ixp46x-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP46x RNG bindings
+
+description: |
+ The Intel IXP46x has a random number generator at a fixed physical
+ location in memory. Each read is guaranteed to provide a unique
+ 32 bit random number.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ compatible:
+ const: intel,ixp46x-rng
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ rng@70002100 {
+ compatible = "intel,ixp46x-rng";
+ reg = <0x70002100 4>;
+ };
+
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index 8051c17..d74a7a5 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -27,6 +27,7 @@
"mediatek,mt8135-pwrap" for MT8135 SoCs
"mediatek,mt8173-pwrap" for MT8173 SoCs
"mediatek,mt8183-pwrap" for MT8183 SoCs
+ "mediatek,mt8195-pwrap" for MT8195 SoCs
"mediatek,mt8516-pwrap" for MT8516 SoCs
- interrupts: IRQ for pwrap in SOC
- reg-names: Must include the following entries:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index 2684f22..d511f01 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -32,12 +32,14 @@
enum:
- qcom,rpm-apq8084
- qcom,rpm-ipq6018
+ - qcom,rpm-msm8226
- qcom,rpm-msm8916
- qcom,rpm-msm8974
- qcom,rpm-msm8976
- qcom,rpm-msm8996
- qcom,rpm-msm8998
- qcom,rpm-sdm660
+ - qcom,rpm-sm6125
- qcom,rpm-qcs404
qcom,smd-channels:
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
deleted file mode 100644
index f96511a..0000000
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip General Register Files (GRF)
-
-The general register file will be used to do static set by software, which
-is composed of many registers for system control.
-
-From RK3368 SoCs, the GRF is divided into two sections,
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- PMUGRF, used for always on system
-
-On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
-
-ON RK3308 SoC, the GRF is divided into four sections:
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- DETECTGRF, used for audio codec system,
-- COREGRF, used for pvtm,
-
-Required Properties:
-
-- compatible: GRF should be one of the following:
- - "rockchip,px30-grf", "syscon": for px30
- - "rockchip,rk3036-grf", "syscon": for rk3036
- - "rockchip,rk3066-grf", "syscon": for rk3066
- - "rockchip,rk3188-grf", "syscon": for rk3188
- - "rockchip,rk3228-grf", "syscon": for rk3228
- - "rockchip,rk3288-grf", "syscon": for rk3288
- - "rockchip,rk3308-grf", "syscon": for rk3308
- - "rockchip,rk3328-grf", "syscon": for rk3328
- - "rockchip,rk3368-grf", "syscon": for rk3368
- - "rockchip,rk3399-grf", "syscon": for rk3399
- - "rockchip,rv1108-grf", "syscon": for rv1108
-- compatible: DETECTGRF should be one of the following:
- - "rockchip,rk3308-detect-grf", "syscon": for rk3308
-- compatilbe: COREGRF should be one of the following:
- - "rockchip,rk3308-core-grf", "syscon": for rk3308
-- compatible: PMUGRF should be one of the following:
- - "rockchip,px30-pmugrf", "syscon": for px30
- - "rockchip,rk3368-pmugrf", "syscon": for rk3368
- - "rockchip,rk3399-pmugrf", "syscon": for rk3399
-- compatible: SGRF should be one of the following:
- - "rockchip,rk3288-sgrf", "syscon": for rk3288
-- compatible: USB2PHYGRF should be one of the following:
- - "rockchip,px30-usb2phy-grf", "syscon": for px30
- - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
-- compatible: USBGRF should be one of the following:
- - "rockchip,rv1108-usbgrf", "syscon": for rv1108
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-Example: GRF and PMUGRF of RK3399 SoCs
-
- pmugrf: syscon@ff320000 {
- compatible = "rockchip,rk3399-pmugrf", "syscon";
- reg = <0x0 0xff320000 0x0 0x1000>;
- };
-
- grf: syscon@ff770000 {
- compatible = "rockchip,rk3399-grf", "syscon";
- reg = <0x0 0xff770000 0x0 0x10000>;
- };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
new file mode 100644
index 0000000..62fa72c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip General Register Files (GRF)
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - rockchip,rk3288-sgrf
+ - rockchip,rv1108-pmugrf
+ - rockchip,rv1108-usbgrf
+ - const: syscon
+ - items:
+ - enum:
+ - rockchip,px30-grf
+ - rockchip,px30-pmugrf
+ - rockchip,px30-usb2phy-grf
+ - rockchip,rk3036-grf
+ - rockchip,rk3066-grf
+ - rockchip,rk3188-grf
+ - rockchip,rk3228-grf
+ - rockchip,rk3288-grf
+ - rockchip,rk3308-core-grf
+ - rockchip,rk3308-detect-grf
+ - rockchip,rk3308-grf
+ - rockchip,rk3308-usb2phy-grf
+ - rockchip,rk3328-grf
+ - rockchip,rk3328-usb2phy-grf
+ - rockchip,rk3368-grf
+ - rockchip,rk3368-pmugrf
+ - rockchip,rk3399-grf
+ - rockchip,rk3399-pmugrf
+ - rockchip,rk3568-grf
+ - rockchip,rk3568-pmugrf
+ - rockchip,rv1108-grf
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties:
+ type: object
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-grf
+
+ then:
+ properties:
+ lvds:
+ description:
+ Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-grf
+
+ then:
+ properties:
+ edp-phy:
+ description:
+ Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,rk3066-grf
+ - rockchip,rk3188-grf
+ - rockchip,rk3288-grf
+
+ then:
+ properties:
+ usbphy:
+ type: object
+
+ $ref: "/schemas/phy/rockchip-usb-phy.yaml#"
+
+ unevaluatedProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3328-grf
+
+ then:
+ properties:
+ gpio:
+ type: object
+
+ $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
+
+ unevaluatedProperties: false
+
+ power-controller:
+ type: object
+
+ $ref: "/schemas/power/rockchip,power-controller.yaml#"
+
+ unevaluatedProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-grf
+
+ then:
+ properties:
+ mipi-dphy-rx0:
+ type: object
+
+ $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
+
+ unevaluatedProperties: false
+
+ pcie-phy:
+ description:
+ Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+
+ patternProperties:
+ "phy@[0-9a-f]+$":
+ description:
+ Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-pmugrf
+ - rockchip,rk3036-grf
+ - rockchip,rk3308-grf
+ - rockchip,rk3368-pmugrf
+
+ then:
+ properties:
+ reboot-mode:
+ type: object
+
+ $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
+
+ unevaluatedProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-usb2phy-grf
+ - rockchip,rk3228-grf
+ - rockchip,rk3308-usb2phy-grf
+ - rockchip,rk3328-usb2phy-grf
+ - rockchip,rk3399-grf
+ - rockchip,rv1108-grf
+
+ then:
+ required:
+ - "#address-cells"
+ - "#size-cells"
+
+ patternProperties:
+ "usb2phy@[0-9a-f]+$":
+ type: object
+
+ $ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#"
+
+ unevaluatedProperties: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-pmugrf
+ - rockchip,px30-grf
+ - rockchip,rk3228-grf
+ - rockchip,rk3288-grf
+ - rockchip,rk3328-grf
+ - rockchip,rk3368-pmugrf
+ - rockchip,rk3368-grf
+ - rockchip,rk3399-pmugrf
+ - rockchip,rk3399-grf
+
+ then:
+ properties:
+ io-domains:
+ description:
+ Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3399-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/rk3399-power.h>
+ grf: syscon@ff770000 {
+ compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+ reg = <0xff770000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mipi_dphy_rx0: mipi-dphy-rx0 {
+ compatible = "rockchip,rk3399-mipi-dphy-rx0";
+ clocks = <&cru SCLK_MIPIDPHY_REF>,
+ <&cru SCLK_DPHY_RX0_CFG>,
+ <&cru PCLK_VIO_GRF>;
+ clock-names = "dphy-ref", "dphy-cfg", "grf";
+ power-domains = <&power RK3399_PD_VIO>;
+ #phy-cells = <0>;
+ };
+
+ u2phy0: usb2phy@e450 {
+ compatible = "rockchip,rk3399-usb2phy";
+ reg = <0xe450 0x10>;
+ clocks = <&cru SCLK_USB2PHY0_REF>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "clk_usbphy0_480m";
+
+ u2phy0_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "linestate";
+ };
+
+ u2phy0_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
deleted file mode 100644
index 8304ece..0000000
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ /dev/null
@@ -1,136 +0,0 @@
-* Rockchip Power Domains
-
-Rockchip processors include support for multiple power domains which can be
-powered up/down by software based on different application scenes to save power.
-
-Required properties for power domain controller:
-- compatible: Should be one of the following.
- "rockchip,px30-power-controller" - for PX30 SoCs.
- "rockchip,rk3036-power-controller" - for RK3036 SoCs.
- "rockchip,rk3066-power-controller" - for RK3066 SoCs.
- "rockchip,rk3128-power-controller" - for RK3128 SoCs.
- "rockchip,rk3188-power-controller" - for RK3188 SoCs.
- "rockchip,rk3228-power-controller" - for RK3228 SoCs.
- "rockchip,rk3288-power-controller" - for RK3288 SoCs.
- "rockchip,rk3328-power-controller" - for RK3328 SoCs.
- "rockchip,rk3366-power-controller" - for RK3366 SoCs.
- "rockchip,rk3368-power-controller" - for RK3368 SoCs.
- "rockchip,rk3399-power-controller" - for RK3399 SoCs.
-- #power-domain-cells: Number of cells in a power-domain specifier.
- Should be 1 for multiple PM domains.
-- #address-cells: Should be 1.
-- #size-cells: Should be 0.
-
-Required properties for power domain sub nodes:
-- reg: index of the power domain, should use macros in:
- "include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
- "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
- "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
- "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
- "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
- "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
- "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
- "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
- "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
- "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
- "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
-- clocks (optional): phandles to clocks which need to be enabled while power domain
- switches state.
-- pm_qos (optional): phandles to qos blocks which need to be saved and restored
- while power domain switches state.
-
-Qos Example:
-
- qos_gpu: qos_gpu@ffaf0000 {
- compatible ="syscon";
- reg = <0x0 0xffaf0000 0x0 0x20>;
- };
-
-Example:
-
- power: power-controller {
- compatible = "rockchip,rk3288-power-controller";
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pd_gpu {
- reg = <RK3288_PD_GPU>;
- clocks = <&cru ACLK_GPU>;
- pm_qos = <&qos_gpu>;
- };
- };
-
- power: power-controller {
- compatible = "rockchip,rk3368-power-controller";
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pd_gpu_1 {
- reg = <RK3368_PD_GPU_1>;
- clocks = <&cru ACLK_GPU_CFG>;
- };
- };
-
-Example 2:
- power: power-controller {
- compatible = "rockchip,rk3399-power-controller";
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pd_vio {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <RK3399_PD_VIO>;
-
- pd_vo {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <RK3399_PD_VO>;
-
- pd_vopb {
- reg = <RK3399_PD_VOPB>;
- };
-
- pd_vopl {
- reg = <RK3399_PD_VOPL>;
- };
- };
- };
- };
-
-Node of a device using power domains must have a power-domains property,
-containing a phandle to the power device node and an index specifying which
-power domain to use.
-The index should use macros in:
- "include/dt-bindings/power/px30-power.h" - for px30 type power domain.
- "include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
- "include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
- "include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
- "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
- "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
- "include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
- "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
- "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
-
-Example of the node using power domain:
-
- node {
- /* ... */
- power-domains = <&power RK3288_PD_GPU>;
- /* ... */
- };
-
- node {
- /* ... */
- power-domains = <&power RK3368_PD_GPU_1>;
- /* ... */
- };
-
- node {
- /* ... */
- power-domains = <&power RK3399_PD_VOPB>;
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
index a16e37b..39b66e9 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -20,6 +20,9 @@
- const: allwinner,sun6i-a31-i2s
- const: allwinner,sun8i-a83t-i2s
- const: allwinner,sun8i-h3-i2s
+ - items:
+ - const: allwinner,sun8i-v3-i2s
+ - const: allwinner,sun8i-h3-i2s
- const: allwinner,sun50i-a64-codec-i2s
- items:
- const: allwinner,sun50i-a64-i2s
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
index 9718358..26eca21 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
@@ -12,12 +12,15 @@
properties:
compatible:
- enum:
+ oneOf:
# FIXME: This is documented in the PRCM binding, but needs to be
# migrated here at some point
# - allwinner,sun8i-a23-codec-analog
- - allwinner,sun8i-h3-codec-analog
- - allwinner,sun8i-v3s-codec-analog
+ - const: allwinner,sun8i-h3-codec-analog
+ - items:
+ - const: allwinner,sun8i-v3-codec-analog
+ - const: allwinner,sun8i-h3-codec-analog
+ - const: allwinner,sun8i-v3s-codec-analog
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
new file mode 100644
index 0000000..a35da25
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/nvidia,tegra30-tsensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 Thermal Sensor
+
+maintainers:
+ - Dmitry Osipenko <digetx@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+ TSENSOR provides thermal and voltage sensors which monitor temperature
+ and voltage of the chip. Sensors are placed across the die to gauge the
+ temperature of the whole chip. The TSENSOR module:
+
+ Generates an interrupt to SW to lower temperature via DVFS on reaching
+ a certain thermal/voltage threshold.
+
+ Generates a signal to the CAR to reduce CPU frequency by half on reaching
+ a certain thermal/voltage threshold.
+
+ Generates a signal to the PMC when the temperature reaches dangerously high
+ levels to reset the chip and sets a flag in the PMC.
+
+ TSENSOR has two channels which monitor two different spots of the SoC.
+
+properties:
+ compatible:
+ const: nvidia,tegra30-tsensor
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#thermal-sensor-cells":
+ const: 1
+
+ assigned-clock-parents: true
+ assigned-clock-rates: true
+ assigned-clocks: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - interrupts
+ - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ thermal-sensor@70014000 {
+ compatible = "nvidia,tegra30-tsensor";
+ reg = <0x70014000 0x500>;
+ interrupts = <0 102 4>;
+ clocks = <&clk 100>;
+ resets = <&rst 100>;
+
+ #thermal-sensor-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 0b3b6af..4a2eaf2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -46,6 +46,8 @@
- qcom,msm8996-tsens
- qcom,msm8998-tsens
- qcom,sc7180-tsens
+ - qcom,sc7280-tsens
+ - qcom,sc8180x-tsens
- qcom,sdm845-tsens
- qcom,sm8150-tsens
- qcom,sm8250-tsens
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
deleted file mode 100644
index 7f94669..0000000
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-* Temperature Sensor ADC (TSADC) on rockchip SoCs
-
-Required properties:
-- compatible : should be "rockchip,<name>-tsadc"
- "rockchip,px30-tsadc": found on PX30 SoCs
- "rockchip,rv1108-tsadc": found on RV1108 SoCs
- "rockchip,rk3228-tsadc": found on RK3228 SoCs
- "rockchip,rk3288-tsadc": found on RK3288 SoCs
- "rockchip,rk3328-tsadc": found on RK3328 SoCs
- "rockchip,rk3368-tsadc": found on RK3368 SoCs
- "rockchip,rk3399-tsadc": found on RK3399 SoCs
-- reg : physical base address of the controller and length of memory mapped
- region.
-- interrupts : The interrupt number to the cpu. The interrupt specifier format
- depends on the interrupt controller.
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk" for
- the peripheral clock.
-- resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names : Must include the name "tsadc-apb".
-- pinctrl-names : The pin control state names;
-- pinctrl-0 : The "init" pinctrl state, it will be set before device probe.
-- pinctrl-1 : The "default" pinctrl state, it will be set after reset the
- TSADC controller.
-- pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend.
-- #thermal-sensor-cells : Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value.
-- rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO.
-- rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW
- 1:HIGH.
-- rockchip,grf : The phandle of the syscon node for the general register file.
-
-Exiample:
-tsadc: tsadc@ff280000 {
- compatible = "rockchip,rk3288-tsadc";
- reg = <0xff280000 0x100>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
- clock-names = "tsadc", "apb_pclk";
- resets = <&cru SRST_TSADC>;
- reset-names = "tsadc-apb";
- pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_gpio>;
- pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_gpio>;
- #thermal-sensor-cells = <1>;
- rockchip,hw-tshut-temp = <95000>;
- rockchip,hw-tshut-mode = <0>;
- rockchip,hw-tshut-polarity = <0>;
-};
-
-Example: referring to thermal sensors:
-thermal-zones {
- cpu_thermal: cpu_thermal {
- polling-delay-passive = <1000>; /* milliseconds */
- polling-delay = <5000>; /* milliseconds */
-
- /* sensor ID */
- thermal-sensors = <&tsadc 1>;
-
- trips {
- cpu_alert0: cpu_alert {
- temperature = <70000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_crit: cpu_crit {
- temperature = <90000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
new file mode 100644
index 0000000..b96ea27
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rockchip-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sensor ADC (TSADC) on Rockchip SoCs
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-tsadc # PX30 SoCs
+ - rockchip,rv1108-tsadc # RV1108 SoCs
+ - rockchip,rk3228-tsadc # RK3228 SoCs
+ - rockchip,rk3288-tsadc # RK3288 SoCs
+ - rockchip,rk3328-tsadc # RK3328 SoCs
+ - rockchip,rk3368-tsadc # RK3368 SoCs
+ - rockchip,rk3399-tsadc # RK3399 SoCs
+ - rockchip,rk3568-tsadc # RK3568 SoCs
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: tsadc
+ - const: apb_pclk
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: tsadc-apb
+
+ "#thermal-sensor-cells":
+ const: 1
+
+ rockchip,grf:
+ description: The phandle of the syscon node for the general register file.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ rockchip,hw-tshut-temp:
+ description: The hardware-controlled shutdown temperature value.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ rockchip,hw-tshut-mode:
+ description: The hardware-controlled shutdown mode 0:CRU 1:GPIO.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ rockchip,hw-tshut-polarity:
+ description: The hardware-controlled active polarity 0:LOW 1:HIGH.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/rk3288-cru.h>
+
+ tsadc: tsadc@ff280000 {
+ compatible = "rockchip,rk3288-tsadc";
+ reg = <0xff280000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ #thermal-sensor-cells = <1>;
+ rockchip,hw-tshut-temp = <95000>;
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
index 1c7cf32..53fd24b 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -12,11 +12,18 @@
properties:
compatible:
- enum:
- - allwinner,sun4i-a10-timer
- - allwinner,sun8i-a23-timer
- - allwinner,sun8i-v3s-timer
- - allwinner,suniv-f1c100s-timer
+ oneOf:
+ - enum:
+ - allwinner,sun4i-a10-timer
+ - allwinner,sun8i-a23-timer
+ - allwinner,sun8i-v3s-timer
+ - allwinner,suniv-f1c100s-timer
+ - items:
+ - enum:
+ - allwinner,sun50i-a64-timer
+ - allwinner,sun50i-h6-timer
+ - allwinner,sun50i-h616-timer
+ - const: allwinner,sun8i-a23-timer
reg:
maxItems: 1
@@ -34,8 +41,8 @@
- if:
properties:
compatible:
- items:
- const: allwinner,sun4i-a10-timer
+ enum:
+ - allwinner,sun4i-a10-timer
then:
properties:
@@ -46,8 +53,8 @@
- if:
properties:
compatible:
- items:
- const: allwinner,sun8i-a23-timer
+ enum:
+ - allwinner,sun8i-a23-timer
then:
properties:
@@ -58,20 +65,9 @@
- if:
properties:
compatible:
- items:
- const: allwinner,sun8i-v3s-timer
-
- then:
- properties:
- interrupts:
- minItems: 3
- maxItems: 3
-
- - if:
- properties:
- compatible:
- items:
- const: allwinner,suniv-f1c100s-timer
+ enum:
+ - allwinner,sun8i-v3s-timer
+ - allwinner,suniv-f1c100s-timer
then:
properties:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 2bbc27a..07fb0d2 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -249,6 +249,8 @@
description: Colorful GRP, Shenzhen Xueyushi Technology Ltd.
"^compulab,.*":
description: CompuLab Ltd.
+ "^congatec,.*":
+ description: congatec GmbH
"^coreriver,.*":
description: CORERIVER Semiconductor Co.,Ltd.
"^corpro,.*":
@@ -315,6 +317,8 @@
description: DPTechnics
"^dragino,.*":
description: Dragino Technology Co., Limited
+ "^ds,.*":
+ description: DaSheng, Inc.
"^dserve,.*":
description: dServe Technology B.V.
"^dynaimage,.*":
@@ -409,6 +413,8 @@
description: Firefly
"^focaltech,.*":
description: FocalTech Systems Co.,Ltd
+ "^forlinx,.*":
+ description: Baoding Forlinx Embedded Technology Co., Ltd.
"^frida,.*":
description: Shenzhen Frida LCD Co., Ltd.
"^friendlyarm,.*":
@@ -1252,6 +1258,8 @@
description: Western Digital Corp.
"^we,.*":
description: Würth Elektronik GmbH.
+ "^welltech,.*":
+ description: Welltech Computer Co., Limited.
"^wetek,.*":
description: WeTek Electronics, limited.
"^wexler,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index b80e6f7..f52954a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1850,6 +1850,7 @@
F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
F: Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
F: Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt
+F: arch/arm/boot/dts/gemini*
F: arch/arm/mach-gemini/
F: drivers/crypto/gemini/
F: drivers/net/ethernet/cortina/
@@ -2210,6 +2211,7 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
W: http://linux-chenxing.org/
+T: git git://github.com/linux-chenxing/linux.git
F: Documentation/devicetree/bindings/arm/mstar/*
F: Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
F: Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
@@ -2479,9 +2481,12 @@
F: drivers/*/*s3c24*
F: drivers/*/*s3c64xx*
F: drivers/*/*s5pv210*
+F: drivers/clocksource/samsung_pwm_timer.c
F: drivers/memory/samsung/
+F: drivers/pwm/pwm-samsung.c
F: drivers/soc/samsung/
F: drivers/tty/serial/samsung*
+F: include/clocksource/samsung_pwm.h
F: include/linux/platform_data/*s3c*
F: include/linux/serial_s3c.h
F: include/linux/soc/samsung/
@@ -7177,6 +7182,13 @@
F: include/uapi/linux/firewire*.h
F: tools/firewire/
+FIRMWARE FRAMEWORK FOR ARMV8-A
+M: Sudeep Holla <sudeep.holla@arm.com>
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
+F: drivers/firmware/arm_ffa/
+F: include/linux/arm_ffa.h
+
FIRMWARE LOADER (request_firmware)
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-kernel@vger.kernel.org
@@ -9381,6 +9393,7 @@
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
M: Deepak Saxena <dsaxena@plexity.net>
S: Maintained
+F: Documentation/devicetree/bindings/display/intel,ixp46x-rng.yaml
F: drivers/char/hw_random/ixp4xx-rng.c
INTEL KEEM BAY DRM DRIVER
@@ -11941,6 +11954,7 @@
F: Documentation/devicetree/bindings/memory-controllers/
F: drivers/memory/
F: include/dt-bindings/memory/
+F: include/memory/
MEMORY FREQUENCY SCALING DRIVERS FOR NVIDIA TEGRA
M: Dmitry Osipenko <digetx@gmail.com>
@@ -13510,12 +13524,6 @@
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod*data*
-OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
-M: Benoît Cousson <bcousson@baylibre.com>
-L: linux-omap@vger.kernel.org
-S: Maintained
-F: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
-
OMAP HWMOD SUPPORT
M: Benoît Cousson <bcousson@baylibre.com>
M: Paul Walmsley <paul@pwsan.com>
@@ -14179,6 +14187,12 @@
F: Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
F: drivers/pci/controller/dwc/pcie-fu740.c
+PCI DRIVER FOR INTEL IXP4XX
+M: Linus Walleij <linus.walleij@linaro.org>
+S: Maintained
+F: Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
+F: drivers/pci/controller/pci-ixp4xx.c
+
PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
M: Jonathan Derrick <jonathan.derrick@intel.com>
L: linux-pci@vger.kernel.org
@@ -18126,6 +18140,7 @@
TEE SUBSYSTEM
M: Jens Wiklander <jens.wiklander@linaro.org>
+R: Sumit Garg <sumit.garg@linaro.org>
L: op-tee@lists.trustedfirmware.org
S: Maintained
F: Documentation/staging/tee.rst
diff --git a/Makefile b/Makefile
index 88888ff..2f3b698 100644
--- a/Makefile
+++ b/Makefile
@@ -129,6 +129,11 @@
$(if $(word 2, $(KBUILD_EXTMOD)), \
$(error building multiple external modules is not supported))
+# Remove trailing slashes
+ifneq ($(filter %/, $(KBUILD_EXTMOD)),)
+KBUILD_EXTMOD := $(shell dirname $(KBUILD_EXTMOD).)
+endif
+
export KBUILD_EXTMOD
# Kbuild will save output files in the current working directory.
@@ -544,14 +549,21 @@
$(Q)rm -f .tmp_quiet_recordmcount
PHONY += outputmakefile
+ifdef building_out_of_srctree
# Before starting out-of-tree build, make sure the source tree is clean.
# outputmakefile generates a Makefile in the output directory, if using a
# separate output directory. This allows convenient use of make in the
# output directory.
# At the same time when output Makefile generated, generate .gitignore to
# ignore whole output directory
+
+quiet_cmd_makefile = GEN Makefile
+ cmd_makefile = { \
+ echo "\# Automatically generated by $(srctree)/Makefile: don't edit"; \
+ echo "include $(srctree)/Makefile"; \
+ } > Makefile
+
outputmakefile:
-ifdef building_out_of_srctree
$(Q)if [ -f $(srctree)/.config -o \
-d $(srctree)/include/config -o \
-d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \
@@ -562,7 +574,7 @@
false; \
fi
$(Q)ln -fsn $(srctree) source
- $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
+ $(call cmd,makefile)
$(Q)test -e .gitignore || \
{ echo "# this is build directory, ignore it"; echo "*"; } > .gitignore
endif
@@ -658,7 +670,7 @@
ifeq ($(KBUILD_EXTMOD),)
# Objects we will link into vmlinux / subdirs we need to visit
-core-y := init/ usr/
+core-y := init/ usr/ arch/$(SRCARCH)/
drivers-y := drivers/ sound/
drivers-$(CONFIG_SAMPLES) += samples/
drivers-$(CONFIG_NET) += net/
@@ -961,8 +973,8 @@
export CC_FLAGS_CFI
endif
-ifdef CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B
-KBUILD_CFLAGS += -falign-functions=32
+ifdef CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B
+KBUILD_CFLAGS += -falign-functions=64
endif
# arch Makefile may override CC so keep this after arch Makefile is included
@@ -1089,41 +1101,6 @@
MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
-HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf)
-
-has_libelf = $(call try-run,\
- echo "int main() {}" | $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
-
-ifdef CONFIG_STACK_VALIDATION
- ifeq ($(has_libelf),1)
- objtool_target := tools/objtool FORCE
- else
- SKIP_STACK_VALIDATION := 1
- export SKIP_STACK_VALIDATION
- endif
-endif
-
-PHONY += resolve_btfids_clean
-
-resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids
-
-# tools/bpf/resolve_btfids directory might not exist
-# in output directory, skip its clean in that case
-resolve_btfids_clean:
-ifneq ($(wildcard $(resolve_btfids_O)),)
- $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
-endif
-
-ifdef CONFIG_BPF
-ifdef CONFIG_DEBUG_INFO_BTF
- ifeq ($(has_libelf),1)
- resolve_btfids_target := tools/bpf/resolve_btfids FORCE
- else
- ERROR_RESOLVE_BTFIDS := 1
- endif
-endif # CONFIG_DEBUG_INFO_BTF
-endif # CONFIG_BPF
-
PHONY += prepare0
export extmod_prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)
@@ -1235,7 +1212,7 @@
$(Q)$(MAKE) $(build)=.
# All the preparing..
-prepare: prepare0 prepare-objtool prepare-resolve_btfids
+prepare: prepare0
PHONY += remove-stale-files
remove-stale-files:
@@ -1252,26 +1229,6 @@
$(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \
generic=include/uapi/asm-generic
-PHONY += prepare-objtool prepare-resolve_btfids
-prepare-objtool: $(objtool_target)
-ifeq ($(SKIP_STACK_VALIDATION),1)
-ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
- @echo "error: Cannot generate __mcount_loc for CONFIG_DYNAMIC_FTRACE=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
- @false
-endif
-ifdef CONFIG_UNWINDER_ORC
- @echo "error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
- @false
-else
- @echo "warning: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
-endif
-endif
-
-prepare-resolve_btfids: $(resolve_btfids_target)
-ifeq ($(ERROR_RESOLVE_BTFIDS),1)
- @echo "error: Cannot resolve BTF IDs for CONFIG_DEBUG_INFO_BTF, please install libelf-dev, libelf-devel or elfutils-libelf-devel" >&2
- @false
-endif
# Generate some files
# ---------------------------------------------------------------------------
@@ -1360,6 +1317,43 @@
$(Q)$(MAKE) $(build)=scripts scripts/unifdef
# ---------------------------------------------------------------------------
+# Tools
+
+ifdef CONFIG_STACK_VALIDATION
+prepare: tools/objtool
+endif
+
+ifdef CONFIG_BPF
+ifdef CONFIG_DEBUG_INFO_BTF
+prepare: tools/bpf/resolve_btfids
+endif
+endif
+
+PHONY += resolve_btfids_clean
+
+resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids
+
+# tools/bpf/resolve_btfids directory might not exist
+# in output directory, skip its clean in that case
+resolve_btfids_clean:
+ifneq ($(wildcard $(resolve_btfids_O)),)
+ $(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
+endif
+
+# Clear a bunch of variables before executing the submake
+ifeq ($(quiet),silent_)
+tools_silent=s
+endif
+
+tools/: FORCE
+ $(Q)mkdir -p $(objtree)/tools
+ $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
+
+tools/%: FORCE
+ $(Q)mkdir -p $(objtree)/tools
+ $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
+
+# ---------------------------------------------------------------------------
# Kernel selftest
PHONY += kselftest
@@ -1959,20 +1953,6 @@
image_name:
@echo $(KBUILD_IMAGE)
-# Clear a bunch of variables before executing the submake
-
-ifeq ($(quiet),silent_)
-tools_silent=s
-endif
-
-tools/: FORCE
- $(Q)mkdir -p $(objtree)/tools
- $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
-
-tools/%: FORCE
- $(Q)mkdir -p $(objtree)/tools
- $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
-
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
cmd_rmfiles = rm -rf $(rm-files)
diff --git a/arch/alpha/Kbuild b/arch/alpha/Kbuild
new file mode 100644
index 0000000..c230201
--- /dev/null
+++ b/arch/alpha/Kbuild
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += kernel/ mm/
+obj-$(CONFIG_MATHEMU) += math-emu/
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index c294643..52529ee 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -38,8 +38,6 @@
head-y := arch/alpha/kernel/head.o
-core-y += arch/alpha/kernel/ arch/alpha/mm/
-core-$(CONFIG_MATHEMU) += arch/alpha/math-emu/
libs-y += arch/alpha/lib/
# export what is needed by arch/alpha/boot/Makefile
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index e47adc9..c0d87ac 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -85,9 +85,6 @@
head-y := arch/arc/kernel/head.o
-# See arch/arc/Kbuild for content of core part of the kernel
-core-y += arch/arc/
-
# w/o this dtb won't embed into kernel binary
core-y += arch/arc/boot/dts/
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 06b6187..3ea1c41 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -394,7 +394,8 @@
select HAVE_PCI
select IXP4XX_IRQ
select IXP4XX_TIMER
- select NEED_MACH_IO_H
+ # With the new PCI driver this is not needed
+ select NEED_MACH_IO_H if PCI_IXP4XX_LEGACY
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
help
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 7902bc2..1c4384d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -609,6 +609,14 @@
when u-boot hands over to the kernel, the system
silently crashes, with no serial output at all.
+ config DEBUG_MSTARV7_PMUART
+ bool "Kernel low-level debugging messages via MSTARV7 PM UART"
+ depends on ARCH_MSTARV7
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for MSTAR ARMv7-based platforms on PM UART.
+
config DEBUG_MT6589_UART0
bool "Mediatek mt6589 UART0"
depends on ARCH_MEDIATEK
@@ -1607,6 +1615,7 @@
default 0x18000400 if DEBUG_BCM_HR2
default 0x18023000 if DEBUG_BCM_IPROC_UART3
default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
+ default 0x1f221000 if DEBUG_MSTARV7_PMUART
default 0x20001000 if DEBUG_HIP01_UART
default 0x20060000 if DEBUG_RK29_UART0
default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
@@ -1724,6 +1733,7 @@
default 0xf0100000 if DEBUG_DIGICOLOR_UA0
default 0xf01fb000 if DEBUG_NOMADIK_UART
default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
+ default 0xf0221000 if DEBUG_MSTARV7_PMUART
default 0xf1000300 if DEBUG_BCM_5301X
default 0xf1000400 if DEBUG_BCM_HR2
default 0xf1002000 if DEBUG_MT8127_UART0
@@ -1805,8 +1815,8 @@
default 0xfedc0000 if DEBUG_EP93XX
default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
- default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
- default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+ default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+ default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
default 0xfef36000 if DEBUG_HIGHBANK_UART
default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
@@ -1829,6 +1839,7 @@
default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
DEBUG_OMAP7XXUART3
+ default 3 if DEBUG_MSTARV7_PMUART
default 2
config DEBUG_UART_8250_WORD
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 415c351..173da68 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -252,7 +252,6 @@
export TEXT_OFFSET GZFLAGS MMUEXT
-core-y += arch/arm/
# If we have a machine-specific directory, then include it in the build.
core-y += $(machdirs) $(platdirs)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f8f09c5..863347b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -88,6 +88,7 @@
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
bcm2837-rpi-cm3-io3.dtb \
+ bcm2711-rpi-400.dtb \
bcm2711-rpi-4-b.dtb \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
@@ -240,6 +241,7 @@
integratorcp.dtb
dtb-$(CONFIG_ARCH_IXP4XX) += \
intel-ixp42x-linksys-nslu2.dtb \
+ intel-ixp42x-welltech-epbx100.dtb \
intel-ixp43x-gateworks-gw2358.dtb
dtb-$(CONFIG_ARCH_KEYSTONE) += \
keystone-k2hk-evm.dtb \
@@ -513,8 +515,14 @@
imx6q-display5-tianma-tm070-1280x768.dtb \
imx6q-dmo-edmqmx6.dtb \
imx6q-dms-ba16.dtb \
+ imx6q-ds.dtb \
imx6q-emcon-avari.dtb \
imx6q-evi.dtb \
+ imx6dl-b105pv2.dtb \
+ imx6dl-b105v2.dtb \
+ imx6dl-b125v2.dtb \
+ imx6dl-b125pv2.dtb \
+ imx6dl-b155v2.dtb \
imx6q-gk802.dtb \
imx6q-gw51xx.dtb \
imx6q-gw52xx.dtb \
@@ -725,7 +733,8 @@
imx28-m28evk.dtb \
imx28-sps1.dtb \
imx28-ts4600.dtb \
- imx28-tx28.dtb
+ imx28-tx28.dtb \
+ imx28-xea.dtb
dtb-$(CONFIG_ARCH_NOMADIK) += \
ste-nomadik-s8815.dtb \
ste-nomadik-nhk15.dtb
@@ -1234,6 +1243,7 @@
sun8i-r16-nintendo-super-nes-classic.dtb \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
+ sun8i-r40-oka40i-c.dtb \
sun8i-s3-elimo-initium.dtb \
sun8i-s3-lichee-zero-plus.dtb \
sun8i-s3-pinecube.dtb \
@@ -1415,6 +1425,7 @@
mstar-mercury5-ssc8336n-midrived08.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
+ aspeed-ast2600-evb-a1.dtb \
aspeed-ast2600-evb.dtb \
aspeed-bmc-amd-ethanolx.dtb \
aspeed-bmc-ampere-mtjade.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 3ea2861..1103a2c 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -393,10 +393,10 @@
status = "okay";
};
-&gpio0 {
+&gpio0_target {
ti,no-reset-on-init;
};
-&gpio3 {
+&gpio3_target {
ti,no-reset-on-init;
};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 86cad99..8011664 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -101,7 +101,7 @@
};
&gpio3 {
- ls_buf_en {
+ ls-buf-en-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 69acaf4..0afcc2e 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -436,7 +436,7 @@
};
&gpio3 {
- ls_buf_en {
+ ls-buf-en-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 7615327..74db0fc 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -101,7 +101,7 @@
};
&gpio1 {
- ls_buf_en {
+ ls-buf-en-hog {
gpio-hog;
gpios = <29 GPIO_ACTIVE_HIGH>;
output-high;
@@ -118,7 +118,7 @@
/* an external pulldown on U21 pin 4. */
&gpio3 {
- bt_aud_in {
+ bt-aud-in-hog {
gpio-hog;
gpios = <16 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 36d963d..688e14e 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -333,7 +333,7 @@
&epwmss0 {
status = "okay";
- ecap0: ecap@100 {
+ ecap0: pwm@100 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins>;
@@ -496,7 +496,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
- ti,pindir-d0-out-d1-in = <1>;
+ ti,pindir-d0-out-d1-in;
/* WLS1271 WiFi */
wlcore: wlcore@1 {
compatible = "ti,wl1271";
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 902e295..9cf39c9 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -495,7 +495,7 @@
&epwmss0 {
status = "okay";
- ecap0: ecap@100 {
+ ecap0: pwm@100 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins>;
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index d5f8d5e..001657b 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -510,7 +510,7 @@
&epwmss2 {
status = "okay";
- ecap2: ecap@100 {
+ ecap2: pwm@100 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap2_pins>;
@@ -646,7 +646,7 @@
status = "okay";
};
-&gpio0 {
+&gpio0_target {
ti,no-reset-on-init;
};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index e923d06..5e598ac 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -458,14 +458,14 @@
};
&gpio3 {
- p4 {
+ pr1-mii-ctl-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PR1_MII_CTRL";
};
- p10 {
+ mux-mii-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 4e90f9c..8121a19 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -150,7 +150,7 @@
status = "okay";
};
-&gpio0 {
+&gpio0_target {
ti,no-reset-on-init;
};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 98d8ed4..39e5d2c 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -353,7 +353,7 @@
status = "okay";
};
-&gpio0 {
+&gpio0_target {
ti,no-reset-on-init;
};
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index f841afb2..5403e47 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -25,10 +25,6 @@
regulator-always-on;
};
-&mmc1 {
- vmmc-supply = <&vmmcsd_fixed>;
-};
-
&mmc2 {
vmmc-supply = <&vmmcsd_fixed>;
pinctrl-names = "default";
@@ -37,68 +33,6 @@
status = "okay";
};
-&am33xx_pinmux {
- nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- >;
- };
-
- nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
- >;
- };
-
- mcasp0_pins: mcasp0-pins {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
- AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
- >;
- };
-
- flash_enable: flash-enable {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */
- >;
- };
-
- imu_interrupt: imu-interrupt {
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_rx_er.gpio3_2 */
- >;
- };
-
- ethernet_interrupt: ethernet-interrupt{
- pinctrl-single,pins = <
- AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 */
- >;
- };
-};
-
&lcdc {
status = "okay";
@@ -167,10 +101,6 @@
};
};
-&rtc {
- system-power-controller;
-};
-
&mcasp0 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
@@ -267,6 +197,66 @@
pinctrl-names = "default";
pinctrl-0 = <&clkout2_pin>;
+ nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+ >;
+ };
+
+ mcasp0_pins: mcasp0-pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+ >;
+ };
+
+ flash_enable: flash-enable {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */
+ >;
+ };
+
+ imu_interrupt: imu-interrupt {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_rx_er.gpio3_2 */
+ >;
+ };
+
+ ethernet_interrupt: ethernet-interrupt{
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* mii1_col.gpio3_0 */
+ >;
+ };
+
user_leds_s0: user-leds-s0 {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a5.gpio1_21 */
@@ -427,6 +417,7 @@
&mmc1 {
status = "okay";
+ vmmc-supply = <&vmmcsd_fixed>;
bus-width = <0x4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
@@ -434,6 +425,7 @@
};
&rtc {
+ system-power-controller;
clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
clock-names = "ext-clk", "int-clk";
};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 1eaa265..2bfe60d 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -140,14 +140,14 @@
};
&gpio1 {
- hmtc_rst {
+ hmtc-rst-hog {
gpio-hog;
gpios = <24 GPIO_ACTIVE_LOW>;
output-high;
line-name = "homematic_reset";
};
- hmtc_prog {
+ hmtc-prog-hog {
gpio-hog;
gpios = <27 GPIO_ACTIVE_LOW>;
output-high;
@@ -156,14 +156,14 @@
};
&gpio3 {
- zgb_rst {
+ zgb-rst-hog {
gpio-hog;
gpios = <18 GPIO_ACTIVE_LOW>;
output-low;
line-name = "zigbee_reset";
};
- zgb_boot {
+ zgb-boot-hog {
gpio-hog;
gpios = <19 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 039a9ab..859e760 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1486,7 +1486,7 @@
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
- mbox_wkupm3: wkup_m3 {
+ mbox_wkupm3: mbox-wkup-m3 {
ti,mbox-send-noirq;
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <0 0 3>;
@@ -1789,7 +1789,7 @@
};
};
- target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */
+ gpio3_target: target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0xae000 0x4>,
<0xae010 0x4>,
@@ -1995,15 +1995,12 @@
status = "disabled";
ranges = <0 0 0x1000>;
- ecap0: ecap@100 {
- compatible = "ti,am3352-ecap",
- "ti,am33xx-ecap";
+ ecap0: pwm@100 {
+ compatible = "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x100 0x80>;
clocks = <&l4ls_gclk>;
clock-names = "fck";
- interrupts = <31>;
- interrupt-names = "ecap0";
status = "disabled";
};
@@ -2017,8 +2014,7 @@
};
ehrpwm0: pwm@200 {
- compatible = "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x200 0x80>;
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
@@ -2056,15 +2052,12 @@
status = "disabled";
ranges = <0 0 0x1000>;
- ecap1: ecap@100 {
- compatible = "ti,am3352-ecap",
- "ti,am33xx-ecap";
+ ecap1: pwm@100 {
+ compatible = "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x100 0x80>;
clocks = <&l4ls_gclk>;
clock-names = "fck";
- interrupts = <47>;
- interrupt-names = "ecap1";
status = "disabled";
};
@@ -2078,8 +2071,7 @@
};
ehrpwm1: pwm@200 {
- compatible = "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x200 0x80>;
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
@@ -2117,15 +2109,12 @@
status = "disabled";
ranges = <0 0 0x1000>;
- ecap2: ecap@100 {
- compatible = "ti,am3352-ecap",
- "ti,am33xx-ecap";
+ ecap2: pwm@100 {
+ compatible = "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x100 0x80>;
clocks = <&l4ls_gclk>;
clock-names = "fck";
- interrupts = <61>;
- interrupt-names = "ecap2";
status = "disabled";
};
@@ -2139,8 +2128,7 @@
};
ehrpwm2: pwm@200 {
- compatible = "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x200 0x80>;
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 6e4d05d..e267768 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -786,7 +786,7 @@
pinctrl-0 = <&gpio0_pins>;
status = "okay";
- p23 {
+ sel-emmc-nand-hog {
gpio-hog;
gpios = <23 GPIO_ACTIVE_HIGH>;
/* SelEMMCorNAND selects between eMMC and NAND:
@@ -813,13 +813,16 @@
status = "okay";
};
+&gpio5_target {
+ ti,no-reset-on-init;
+};
+
&gpio5 {
pinctrl-names = "default";
pinctrl-0 = <&display_mux_pins>;
status = "okay";
- ti,no-reset-on-init;
- p8 {
+ sel-lcd-hdmi-hog {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index e217ffc..40ef397 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -194,7 +194,7 @@
ranges = <0x0 0x9000 0x1000>;
uart0: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -712,7 +712,7 @@
ranges = <0x0 0x22000 0x1000>;
uart1: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -740,7 +740,7 @@
ranges = <0x0 0x24000 0x1000>;
uart2: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1168,7 +1168,7 @@
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
- mbox_wkupm3: wkup_m3 {
+ mbox_wkupm3: mbox-wkup-m3 {
ti,mbox-send-noirq;
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <0 0 3>;
@@ -1399,7 +1399,7 @@
ranges = <0x0 0xa6000 0x1000>;
uart3: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1427,7 +1427,7 @@
ranges = <0x0 0xa8000 0x1000>;
uart4: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1455,7 +1455,7 @@
ranges = <0x0 0xaa000 0x1000>;
uart5: serial@0 {
- compatible = "ti,am4372-uart","ti,omap2-uart";
+ compatible = "ti,am4372-uart";
reg = <0x0 0x2000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1747,10 +1747,9 @@
ranges = <0 0 0x1000>;
status = "disabled";
- ecap0: ecap@100 {
+ ecap0: pwm@100 {
compatible = "ti,am4372-ecap",
- "ti,am3352-ecap",
- "ti,am33xx-ecap";
+ "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x100 0x80>;
clocks = <&l4ls_gclk>;
@@ -1760,8 +1759,7 @@
ehrpwm0: pwm@200 {
compatible = "ti,am4372-ehrpwm",
- "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x200 0x80>;
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
@@ -1799,10 +1797,9 @@
ranges = <0 0 0x1000>;
status = "disabled";
- ecap1: ecap@100 {
+ ecap1: pwm@100 {
compatible = "ti,am4372-ecap",
- "ti,am3352-ecap",
- "ti,am33xx-ecap";
+ "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x100 0x80>;
clocks = <&l4ls_gclk>;
@@ -1812,8 +1809,7 @@
ehrpwm1: pwm@200 {
compatible = "ti,am4372-ehrpwm",
- "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x200 0x80>;
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
@@ -1851,10 +1847,9 @@
ranges = <0 0 0x1000>;
status = "disabled";
- ecap2: ecap@100 {
+ ecap2: pwm@100 {
compatible = "ti,am4372-ecap",
- "ti,am3352-ecap",
- "ti,am33xx-ecap";
+ "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x100 0x80>;
clocks = <&l4ls_gclk>;
@@ -1864,8 +1859,7 @@
ehrpwm2: pwm@200 {
compatible = "ti,am4372-ehrpwm",
- "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x200 0x80>;
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
@@ -1905,8 +1899,7 @@
ehrpwm3: pwm@200 {
compatible = "ti,am4372-ehrpwm",
- "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x200 0x80>;
clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
@@ -1946,8 +1939,7 @@
ehrpwm4: pwm@48308200 {
compatible = "ti,am4372-ehrpwm",
- "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x200 0x80>;
clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
@@ -1987,8 +1979,7 @@
ehrpwm5: pwm@200 {
compatible = "ti,am4372-ehrpwm",
- "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x200 0x80>;
clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
@@ -2070,7 +2061,7 @@
};
};
- target-module@22000 { /* 0x48322000, ap 116 64.0 */
+ gpio5_target: target-module@22000 { /* 0x48322000, ap 116 64.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x22000 0x4>,
<0x22010 0x4>,
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index f517d1e..aae0af1 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -725,7 +725,7 @@
pinctrl-0 = <&display_mux_pins>;
status = "okay";
- p1 {
+ sel-lcd-hdmi-hog {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
@@ -860,7 +860,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi0_pins_default>;
pinctrl-1 = <&spi0_pins_sleep>;
- ti,pindir-d0-out-d1-in = <1>;
+ ti,pindir-d0-out-d1-in;
};
&spi1 {
@@ -868,7 +868,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi1_pins_default>;
pinctrl-1 = <&spi1_pins_sleep>;
- ti,pindir-d0-out-d1-in = <1>;
+ ti,pindir-d0-out-d1-in;
};
&usb2_phy1 {
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
index ebf4d3cc..6d7530a4 100644
--- a/arch/arm/boot/dts/am5718.dtsi
+++ b/arch/arm/boot/dts/am5718.dtsi
@@ -17,17 +17,13 @@
* VCP1, VCP2
* MLB
* ISS
- * USB3, USB4
+ * USB3
*/
&usb3_tm {
status = "disabled";
};
-&usb4_tm {
- status = "disabled";
-};
-
&atl_tm {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 0d5fe2b..aed81568 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -454,20 +454,20 @@
&mailbox5 {
status = "okay";
- mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
status = "okay";
};
- mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
- mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
status = "okay";
};
- mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
status = "okay";
};
};
@@ -610,12 +610,11 @@
>;
};
-&gpio3 {
- status = "okay";
+&gpio3_target {
ti,no-reset-on-init;
};
-&gpio2 {
+&gpio2_target {
status = "okay";
ti,no-reset-on-init;
};
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 8bec21e..583a241 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -13,7 +13,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ bootargs = "console=tty0 console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
new file mode 100644
index 0000000..dd71480
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+
+#include "aspeed-ast2600-evb.dts"
+
+/ {
+ model = "AST2600 A1 EVB";
+
+ /delete-node/regulator-vcc-sdhci0;
+ /delete-node/regulator-vcc-sdhci1;
+ /delete-node/regulator-vccq-sdhci0;
+ /delete-node/regulator-vccq-sdhci1;
+};
+
+/delete-node/ &sdc;
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 2772796..b7eb552 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -4,6 +4,7 @@
/dts-v1/;
#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "AST2600 EVB";
@@ -21,6 +22,46 @@
device_type = "memory";
reg = <0x80000000 0x80000000>;
};
+
+ vcc_sdhci0: regulator-vcc-sdhci0 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHCI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhci0: regulator-vccq-sdhci0 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHCI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>,
+ <1800000 0>;
+ };
+
+ vcc_sdhci1: regulator-vcc-sdhci1 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHCI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhci1: regulator-vccq-sdhci1 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHCI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>,
+ <1800000 0>;
+ };
};
&mdio0 {
@@ -107,7 +148,8 @@
&emmc {
non-removable;
bus-width = <4>;
- max-frequency = <52000000>;
+ max-frequency = <100000000>;
+ clk-phase-mmc-hs200 = <9>, <225>;
};
&rtc {
@@ -121,37 +163,7 @@
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- u-boot@0 {
- reg = <0x0 0xe0000>; // 896KB
- label = "u-boot";
- };
-
- u-boot-env@e0000 {
- reg = <0xe0000 0x20000>; // 128KB
- label = "u-boot-env";
- };
-
- kernel@100000 {
- reg = <0x100000 0x900000>; // 9MB
- label = "kernel";
- };
-
- rofs@a00000 {
- reg = <0xa00000 0x2000000>; // 32MB
- label = "rofs";
- };
-
- rwfs@6000000 {
- reg = <0x2a00000 0x1600000>; // 22MB
- label = "rwfs";
- };
- };
+#include "openbmc-flash-layout-64.dtsi"
};
};
@@ -245,3 +257,46 @@
&uhci {
status = "okay";
};
+
+&sdc {
+ status = "okay";
+};
+
+/*
+ * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be
+ * toggled by GPIO pins.
+ * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the
+ * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to
+ * a 1.8v and a 3.3v power load switch that provides signal voltage to
+ * sdhci0 bus.
+ * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled.
+ * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal
+ * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled,
+ * sdhci0 signal voltage becomes 1.8v.
+ * AST2600-A2 EVB also supports toggling signal voltage for sdhci1.
+ * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3
+ * as power-switch-gpio.
+ */
+&sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <100000000>;
+ sdhci-drive-type = /bits/ 8 <3>;
+ sdhci-caps-mask = <0x7 0x0>;
+ sdhci,wp-inverted;
+ vmmc-supply = <&vcc_sdhci0>;
+ vqmmc-supply = <&vccq_sdhci0>;
+ clk-phase-sd-hs = <7>, <200>;
+};
+
+&sdhci1 {
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <100000000>;
+ sdhci-drive-type = /bits/ 8 <3>;
+ sdhci-caps-mask = <0x7 0x0>;
+ sdhci,wp-inverted;
+ vmmc-supply = <&vcc_sdhci1>;
+ vqmmc-supply = <&vccq_sdhci1>;
+ clk-phase-sd-hs = <7>, <200>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
index 6aeb47c..79d1784 100644
--- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -34,7 +34,7 @@
};
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 8f5ec22..57b0c45 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -9,7 +9,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
@@ -110,6 +110,30 @@
linux,code = <ASPEED_GPIO(Q, 5)>;
};
+ psu1_vin_good {
+ label = "PSU1_VIN_GOOD";
+ gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(H, 4)>;
+ };
+
+ psu2_vin_good {
+ label = "PSU2_VIN_GOOD";
+ gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(H, 5)>;
+ };
+
+ psu1_present {
+ label = "PSU1_PRESENT";
+ gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(I, 0)>;
+ };
+
+ psu2_present {
+ label = "PSU2_PRESENT";
+ gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(I, 1)>;
+ };
+
};
gpioA0mux: mux-controller {
@@ -280,7 +304,7 @@
m25p,fast-read;
label = "bmc";
/* spi-max-frequency = <50000000>; */
-#include "openbmc-flash-layout.dtsi"
+#include "openbmc-flash-layout-64.dtsi"
};
};
@@ -332,6 +356,16 @@
status = "okay";
};
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
&mac1 {
status = "okay";
pinctrl-names = "default";
@@ -426,6 +460,19 @@
status = "okay";
};
+&i2c10 {
+ status = "okay";
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ };
+
+ adm1278@11 {
+ compatible = "adi,adm1278";
+ reg = <0x11>;
+ };
+};
+
&gfx {
status = "okay";
memory-region = <&gfx_memory>;
@@ -529,8 +576,9 @@
"S1_DDR_SAVE","","",
/*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
"","",
- /*H0-H7*/ "","","","","","","","",
- /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","",
+ /*H0-H7*/ "","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
+ /*I0-I7*/ "PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
+ "","","","","",
/*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
"","","","",
/*K0-K7*/ "","","","","","","","",
@@ -540,7 +588,8 @@
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "","","","","","","","",
/*Q0-Q7*/ "","","","","","UID_BUTTON","","",
- /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","",
+ /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
+ "OCP_MAIN_PWREN","RESET_BUTTON","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
index c2ece0b..3395de96e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
@@ -10,7 +10,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
index 2c29ac0..7c6af7f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -10,7 +10,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
index dcab6e7..33e413c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -15,7 +15,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ bootargs = "console=tty0 console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
index 5ef88c3..01dace8 100644
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -55,7 +55,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
index 2fb8b14..90a3f48 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -280,7 +280,7 @@
chosen {
stdout-path = &uart1;
- bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk";
+ bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlycon";
};
ast-adc-hwmon {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index 7b4b2b1..b6b1635 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -37,7 +37,7 @@
};
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 3295c8c..d26a9e1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -202,6 +202,35 @@
linux,code = <12>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* RTC battery fault LED at the back */
+ led-rtc-battery {
+ gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ /* BMC Card fault LED at the back */
+ led-bmc {
+ gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure Identify LED at the back */
+ led-rear-enc-id0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ /* Enclosure fault LED at the back */
+ led-rear-enc-fault0 {
+ gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ /* PCIE slot power LED */
+ led-pcieslot-power {
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
};
&gpio0 {
@@ -214,7 +243,7 @@
/*F0-F7*/ "PIN_HOLE_RESET_IN_N","","",
"PIN_HOLE_RESET_OUT_N","","","","",
/*G0-G7*/ "","","","","","","","",
- /*H0-H7*/ "","","","","","","","",
+ /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
@@ -222,7 +251,7 @@
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","","","","","",
- /*P0-P7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","led-pcieslot-power","","","",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","I2C_FLASH_MICRO_N","","",
/*S0-S7*/ "","","","","","","","",
@@ -353,10 +382,47 @@
&i2c1 {
status = "okay";
+};
- pca2: pca9552@61 {
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+
+ power-supply@68 {
+ compatible = "ibm,cffps";
+ reg = <0x68>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps";
+ reg = <0x69>;
+ };
+
+ power-supply@6a {
+ compatible = "ibm,cffps";
+ reg = <0x6a>;
+ };
+
+ power-supply@6b {
+ compatible = "ibm,cffps";
+ reg = <0x6b>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ pca2: pca9552@65 {
compatible = "nxp,pca9552";
- reg = <0x61>;
+ reg = <0x65>;
#address-cells = <1>;
#size-cells = <0>;
@@ -424,12 +490,222 @@
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
-
};
- pca3: pca9552@62 {
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ pca_cable_card_c01: pca9551@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c01-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c01-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+ };
+
+ i2c4mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ pca_cable_card_c02: pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c02-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c02-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+ };
+
+ i2c4mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ pca_cable_card_c03: pca9551@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c03-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c03-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ pca3: pca9552@66 {
compatible = "nxp,pca9552";
- reg = <0x62>;
+ reg = <0x66>;
#address-cells = <1>;
#size-cells = <0>;
@@ -512,87 +788,6 @@
};
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-
- eeprom@54 {
- compatible = "atmel,24c128";
- reg = <0x54>;
- };
-
- power-supply@68 {
- compatible = "ibm,cffps";
- reg = <0x68>;
- };
-
- power-supply@69 {
- compatible = "ibm,cffps";
- reg = <0x69>;
- };
-
- power-supply@6a {
- compatible = "ibm,cffps";
- reg = <0x6a>;
- };
-
- power-supply@6b {
- compatible = "ibm,cffps";
- reg = <0x6b>;
- };
-};
-
-&i2c4 {
- status = "okay";
-
- i2c-switch@70 {
- compatible = "nxp,pca9546";
- reg = <0x70>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
- i2c-mux-idle-disconnect;
-
- i2c4mux0chn0: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- eeprom@52 {
- compatible = "atmel,24c64";
- reg = <0x52>;
- };
- };
-
- i2c4mux0chn1: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
- };
-
- i2c4mux0chn2: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- eeprom@51 {
- compatible = "atmel,24c64";
- reg = <0x51>;
- };
- };
- };
-};
-
-&i2c5 {
- status = "okay";
-
i2c-switch@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
@@ -609,6 +804,62 @@
compatible = "atmel,24c64";
reg = <0x50>;
};
+
+ pca_cable_card_c04: pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c04-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c04-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
i2c5mux0chn1: i2c@1 {
@@ -619,6 +870,62 @@
compatible = "atmel,24c64";
reg = <0x51>;
};
+
+ pca_cable_card_c05: pca9551@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c05-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c05-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
i2c5mux0chn2: i2c@2 {
@@ -629,6 +936,62 @@
compatible = "atmel,24c64";
reg = <0x52>;
};
+
+ pca_cable_card_c06: pca9551@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c06-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c06-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
i2c5mux0chn3: i2c@3 {
@@ -639,6 +1002,62 @@
compatible = "atmel,24c64";
reg = <0x53>;
};
+
+ pca_cable_card_c07: pca9551@63 {
+ compatible = "nxp,pca9551";
+ reg = <0x63>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c07-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c07-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
};
};
@@ -659,8 +1078,64 @@
#size-cells = <0>;
reg = <0>;
eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ pca_cable_card_c08: pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c08-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c08-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
};
};
@@ -672,6 +1147,62 @@
compatible = "atmel,24c64";
reg = <0x52>;
};
+
+ pca_cable_card_c09: pca9551@62 {
+ compatible = "nxp,pca9551";
+ reg = <0x62>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c09-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c09-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
i2c6mux0chn2: i2c@2 {
@@ -682,6 +1213,62 @@
compatible = "atmel,24c64";
reg = <0x53>;
};
+
+ pca_cable_card_c10: pca9551@63 {
+ compatible = "nxp,pca9551";
+ reg = <0x63>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c10-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c10-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
};
i2c6mux0chn3: i2c@3 {
@@ -692,12 +1279,1013 @@
compatible = "atmel,24c64";
reg = <0x51>;
};
+
+ pca_cable_card_c11: pca9551@61 {
+ compatible = "nxp,pca9551";
+ reg = <0x61>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "cablecard-c11-cxp-top";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "cablecard-c11-cxp-bot";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+ };
+ };
+
+ pca_pcie_slot: pca9552@65 {
+ compatible = "nxp,pca9552";
+ reg = <0x65>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led@1 {
+ label = "pcieslot-c01";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "pcieslot-c02";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "pcieslot-c03";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "pcieslot-c04";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "pcieslot-c05";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "pcieslot-c06";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "pcieslot-c07";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "pcieslot-c08";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "pcieslot-c09";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "pcieslot-c10";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "pcieslot-c11";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
};
};
};
&i2c7 {
status = "okay";
+
+ pic0_dimm: pca9552@31 {
+ compatible = "ibm,pca9552";
+ reg = <0x31>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "ddimm0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "ddimm1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "ddimm2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "ddimm3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "ddimm4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "ddimm5";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "ddimm6";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "ddimm7";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "ddimm8";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "ddimm9";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "ddimm10";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "ddimm11";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "ddimm12";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "ddimm13";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "ddimm14";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "ddimm15";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pic1_dimm: pca9552@32 {
+ compatible = "ibm,pca9552";
+ reg = <0x32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "ddimm16";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "ddimm17";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "ddimm18";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "ddimm19";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "ddimm20";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "ddimm21";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "ddimm22";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "ddimm23";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "ddimm24";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "ddimm25";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "ddimm26";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "ddimm27";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "ddimm28";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "ddimm29";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "ddimm30";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "ddimm31";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pic2_dimm: pca9552@33 {
+ compatible = "ibm,pca9552";
+ reg = <0x33>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "ddimm32";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "ddimm33";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "ddimm34";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "ddimm35";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "ddimm36";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "ddimm37";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "ddimm38";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "ddimm39";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "ddimm40";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "ddimm41";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "ddimm42";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "ddimm43";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "ddimm44";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "ddimm45";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "ddimm46";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "ddimm47";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pic3_dimm: pca9552@30 {
+ compatible = "ibm,pca9552";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "ddimm48";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "ddimm49";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "ddimm50";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "ddimm51";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "ddimm52";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "ddimm53";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "ddimm54";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "ddimm55";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "ddimm56";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "ddimm57";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "ddimm58";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "ddimm59";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "ddimm60";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "ddimm61";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "ddimm62";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "ddimm63";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pic0_vrm_misc: pca9552@34 {
+ compatible = "ibm,pca9552";
+ reg = <0x34>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "planar";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "tpm";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "cpu3-c61";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "cpu0-c14";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "opencapi-connector3";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "opencapi-connector4";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "opencapi-connector5";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led@8 {
+ label = "vrm4";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "vrm5";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "vrm6";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "vrm7";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "vrm12";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "vrm13";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "vrm14";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "vrm15";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pic1_vrm_misc: pca9552@35 {
+ compatible = "ibm,pca9552";
+ reg = <0x35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "dasd-backplane";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "power-distribution";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "cpu1-c19";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "cpu2-c56";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "opencapi-connector0";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "opencapi-connector1";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "opencapi-connector2";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led@8 {
+ label = "vrm0";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "vrm1";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "vrm2";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "vrm3";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "vrm8";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "vrm9";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "vrm10";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "vrm11";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
};
&i2c8 {
@@ -863,6 +2451,48 @@
compatible = "atmel,24c32";
reg = <0x50>;
};
+
+ pca_oppanel: pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "front-sys-id0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "front-check-log0";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "front-enc-fault1";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "front-sys-pwron0";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
};
i2c14mux0chn3: i2c@3 {
@@ -901,6 +2531,138 @@
};
};
+ pca_fan_nvme: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "nvme0";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "nvme1";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "nvme2";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "nvme3";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "nvme4";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "nvme5";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "nvme6";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@7 {
+ label = "nvme7";
+ reg = <7>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@8 {
+ label = "nvme8";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "nvme9";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "fan0";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "fan1";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "fan2";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "fan3";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
pca0: pca9552@61 {
compatible = "nxp,pca9552";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
index f7fd3b3..342546a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
@@ -19,33 +19,3 @@
reg = <0x6b>;
};
};
-
-&fan0 {
- tach-pulses = <4>;
- /delete-property/ maxim,fan-dual-tach;
-};
-
-&fan1 {
- tach-pulses = <4>;
- /delete-property/ maxim,fan-dual-tach;
-};
-
-&fan2 {
- tach-pulses = <4>;
- /delete-property/ maxim,fan-dual-tach;
-};
-
-&fan3 {
- tach-pulses = <4>;
- /delete-property/ maxim,fan-dual-tach;
-};
-
-&fan4 {
- tach-pulses = <4>;
- /delete-property/ maxim,fan-dual-tach;
-};
-
-&fan5 {
- tach-pulses = <4>;
- /delete-property/ maxim,fan-dual-tach;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
index 0759389..1752f325 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -10,7 +10,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
index 80c92e0..5a98a19 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
@@ -11,7 +11,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "earlyprintk";
+ bootargs = "earlycon";
};
memory {
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
index 6e9baf3..d5b7d28 100644
--- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -10,7 +10,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "earlyprintk";
+ bootargs = "earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
index c29e5f4..8f543cc 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
@@ -27,7 +27,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ bootargs = "console=tty0 console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
index 084c455..bcc1820 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
@@ -27,7 +27,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ bootargs = "console=tty0 console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
index 7331991..3ef8358 100644
--- a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
@@ -11,7 +11,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@40000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
index 42b37a2..c0847636 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
@@ -11,7 +11,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index 15c1f0a..a52a289 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -57,7 +57,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
index 8503152..7d38d12 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -11,7 +11,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
index 91dced7..3d4bdad 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -10,7 +10,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index eb4e93a..cd660c1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -10,7 +10,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@40000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index fd2e014..084f548 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -9,7 +9,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
index d56b5ed..4816486 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -10,7 +10,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index c1478d2..e863ec0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -13,7 +13,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200n8";
+ bootargs = "console=ttyS4,115200n8 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
index 01074b6..328ef47 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -11,7 +11,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@40000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 85d58a6..230f358 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -10,7 +10,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index 4bcc820..7ae4ea0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -17,7 +17,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
index 03c1614..61bc74b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
@@ -14,7 +14,7 @@
};
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
index a68ff06..9605e53 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -28,7 +28,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "console=ttyS4,115200 earlyprintk";
+ bootargs = "console=ttyS4,115200 earlycon";
};
memory@40000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
index bc16ad2..50f3c6a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
@@ -11,7 +11,7 @@
chosen {
stdout-path = &uart5;
- bootargs = "earlyprintk";
+ bootargs = "earlycon";
};
memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d733c1f..329eaee 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -264,6 +264,7 @@
reg-io-width = <4>;
clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
resets = <&syscon ASPEED_RESET_CRT1>;
+ syscon = <&syscon>;
status = "disabled";
interrupts = <0x19>;
};
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 7028e21..7e90d71 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -862,11 +862,21 @@
groups = "SGPM1";
};
+ pinctrl_sgpm2_default: sgpm2_default {
+ function = "SGPM2";
+ groups = "SGPM2";
+ };
+
pinctrl_sgps1_default: sgps1_default {
function = "SGPS1";
groups = "SGPS1";
};
+ pinctrl_sgps2_default: sgps2_default {
+ function = "SGPS2";
+ groups = "SGPS2";
+ };
+
pinctrl_sioonctrl_default: sioonctrl_default {
function = "SIOONCTRL";
groups = "SIOONCTRL";
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 0025c88..8ecb786 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -460,7 +460,7 @@
status = "disabled";
};
- nand: nand@18046000 {
+ nand_controller: nand-controller@18046000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x18046000 0x600>, <0xf8105408 0x600>,
<0x18046f00 0x20>;
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index e8df458..84cda16 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -179,7 +179,7 @@
status = "disabled";
};
- nand: nand@26000 {
+ nand_controller: nand-controller@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x26000 0x600>,
<0x11b408 0x600>,
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index b4d2cc7..748df79 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -269,7 +269,7 @@
dma-coherent;
};
- nand: nand@26000 {
+ nand_controller: nand-controller@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x026000 0x600>,
<0x11b408 0x600>,
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 3b4ab94..f24bdd0 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -1,11 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2711.dtsi"
-#include "bcm2835-rpi.dtsi"
+#include "bcm2711-rpi.dtsi"
#include "bcm283x-rpi-usb-peripheral.dtsi"
-#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
-
/ {
compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
model = "Raspberry Pi 4 Model B";
@@ -15,25 +13,12 @@
stdout-path = "serial1:115200n8";
};
- /* Will be filled by the bootloader */
- memory@0 {
- device_type = "memory";
- reg = <0 0 0>;
- };
-
- aliases {
- emmc2bus = &emmc2bus;
- ethernet0 = &genet;
- pcie0 = &pcie0;
- blconfig = &blconfig;
- };
-
leds {
- act {
+ led-act {
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
};
- pwr {
+ led-pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
@@ -79,31 +64,15 @@
status = "okay";
};
-&firmware {
- firmware_clocks: clocks {
- compatible = "raspberrypi,firmware-clocks";
- #clock-cells = <1>;
- };
-
- expgpio: gpio {
- compatible = "raspberrypi,firmware-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "BT_ON",
- "WL_ON",
- "PWR_LED_OFF",
- "GLOBAL_RESET",
- "VDD_SD_IO_SEL",
- "CAM_GPIO",
- "SD_PWR_ON",
- "";
- status = "okay";
- };
-
- reset: reset {
- compatible = "raspberrypi,firmware-reset";
- #reset-cells = <1>;
- };
+&expgpio {
+ gpio-line-names = "BT_ON",
+ "WL_ON",
+ "PWR_LED_OFF",
+ "GLOBAL_RESET",
+ "VDD_SD_IO_SEL",
+ "CAM_GPIO",
+ "SD_PWR_ON",
+ "";
};
&gpio {
@@ -180,23 +149,13 @@
};
&hdmi0 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
&hdmi1 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
-&hvs {
- clocks = <&firmware_clocks 4>;
-};
-
&pixelvalve0 {
status = "okay";
};
@@ -219,22 +178,6 @@
status = "okay";
};
-&rmem {
- /*
- * RPi4's co-processor will copy the board's bootloader configuration
- * into memory for the OS to consume. It'll also update this node with
- * its placement information.
- */
- blconfig: nvram@0 {
- compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x0 0x0 0x0>;
- no-map;
- status = "disabled";
- };
-};
-
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
#address-cells = <1>;
@@ -309,10 +252,6 @@
status = "okay";
};
-&vchiq {
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-};
-
&vc4 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts
new file mode 100644
index 0000000..f4d2fc2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-4-b.dts"
+
+/ {
+ compatible = "raspberrypi,400", "brcm,bcm2711";
+ model = "Raspberry Pi 400";
+
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
+ };
+
+ leds {
+ /delete-node/ led-act;
+
+ led-pwr {
+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&expgpio {
+ gpio-line-names = "BT_ON",
+ "WL_ON",
+ "",
+ "GLOBAL_RESET",
+ "VDD_SD_IO_SEL",
+ "CAM_GPIO",
+ "SD_PWR_ON",
+ "SD_OC_N";
+};
+
+&genet_mdio {
+ clock-frequency = <1950000>;
+};
+
+&pm {
+ /delete-property/ system-power-controller;
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
new file mode 100644
index 0000000..ca266c5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+ /* Will be filled by the bootloader */
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0 0>;
+ };
+
+ aliases {
+ emmc2bus = &emmc2bus;
+ ethernet0 = &genet;
+ pcie0 = &pcie0;
+ blconfig = &blconfig;
+ };
+};
+
+&firmware {
+ firmware_clocks: clocks {
+ compatible = "raspberrypi,firmware-clocks";
+ #clock-cells = <1>;
+ };
+
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "okay";
+ };
+
+ reset: reset {
+ compatible = "raspberrypi,firmware-reset";
+ #reset-cells = <1>;
+ };
+};
+
+&hdmi0 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+ wifi-2.4ghz-coexistence;
+};
+
+&hdmi1 {
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+ wifi-2.4ghz-coexistence;
+};
+
+&hvs {
+ clocks = <&firmware_clocks 4>;
+};
+
+&rmem {
+ /*
+ * RPi4's co-processor will copy the board's bootloader configuration
+ * into memory for the OS to consume. It'll also update this node with
+ * its placement information.
+ */
+ blconfig: nvram@0 {
+ compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x0 0x0>;
+ no-map;
+ status = "disabled";
+ };
+};
+
+&vchiq {
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 720beec..b8a4096 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -413,7 +413,7 @@
ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
- emmc2: emmc2@7e340000 {
+ emmc2: mmc@7e340000 {
compatible = "brcm,bcm2711-emmc2";
reg = <0x0 0x7e340000 0x100>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
@@ -1087,5 +1087,6 @@
};
&vec {
+ compatible = "brcm,bcm2711-vec";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 6c8ce39..40b9405 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -14,11 +14,11 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
};
- pwr {
+ led-pwr {
label = "PWR";
gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 17fdd48..11edb581 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -14,7 +14,7 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index b0355c2..1b435c6 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -15,11 +15,11 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
};
- pwr {
+ led-pwr {
label = "PWR";
gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 33b3b5c..a23c25c 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -15,7 +15,7 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957..1b63d6b 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -15,7 +15,7 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index 58059c2..e4e6b6ab 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -5,7 +5,7 @@
/ {
leds {
- act {
+ led-act {
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index f65448c..33b2b77 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -23,7 +23,7 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6dd93c6..6f9b3a9 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -18,7 +18,7 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index d94357b..87ddcad 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -4,7 +4,7 @@
leds {
compatible = "gpio-leds";
- act {
+ led-act {
label = "ACT";
default-state = "keep";
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 0455a68..d8af8ee 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -15,11 +15,11 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
};
- pwr {
+ led-pwr {
label = "PWR";
gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 28be033..77099a7 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -19,11 +19,11 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
};
- pwr {
+ led-pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 3734314..6101026 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -20,11 +20,11 @@
};
leds {
- act {
+ led-act {
gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
};
- pwr {
+ led-pwr {
label = "PWR";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 054ecaa..dd4a486 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,7 +20,7 @@
};
leds {
- act {
+ led-act {
gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 925cb37..828a205 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -14,7 +14,7 @@
* Since there is no upstream GPIO driver yet,
* remove the incomplete node.
*/
- /delete-node/ act;
+ /delete-node/ led-act;
};
reg_3v3: fixed-regulator {
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
index 20322de..e2fd961 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
&usb {
dr_mode = "otg";
- g-rx-fifo-size = <558>;
+ g-rx-fifo-size = <256>;
g-np-tx-fifo-size = <32>;
/*
* According to dwc2 the sum of all device EP
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
index 1409d1b..0ff0e9e 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
&usb {
dr_mode = "peripheral";
- g-rx-fifo-size = <558>;
+ g-rx-fifo-size = <256>;
g-np-tx-fifo-size = <32>;
g-tx-fifo-size = <256 256 512 512 512 768 768>;
};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index b83a864..0f3be55 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -420,7 +420,7 @@
status = "disabled";
};
- sdhci: sdhci@7e300000 {
+ sdhci: mmc@7e300000 {
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
interrupts = <2 30>;
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 8636600..c81944c 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -24,8 +24,8 @@
reg = <0x00000000 0x08000000>;
};
- nand: nand@18028000 {
- nandcs@0 {
+ nand_controller: nand-controller@18028000 {
+ nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index e635a15..a6e2aeb 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -25,8 +25,8 @@
<0x88000000 0x08000000>;
};
- nand: nand@18028000 {
- nandcs@0 {
+ nand_controller: nand-controller@18028000 {
+ nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index 2a8f731..6282363 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -11,7 +11,7 @@
&pinctrl {
compatible = "brcm,bcm4709-pinmux";
- pinmux_mdio: mdio {
+ pinmux_mdio: mdio-pins {
groups = "mdio_grp";
function = "mdio";
};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
index 925a7c9..be9a00f 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -6,8 +6,8 @@
*/
/ {
- nand@18028000 {
- nandcs: nandcs@0 {
+ nand-controller@18028000 {
+ nandcs: nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 7db72a2..f920892 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -458,18 +458,18 @@
function = "spi";
};
- pinmux_i2c: i2c {
+ pinmux_i2c: i2c-pins {
groups = "i2c_grp";
function = "i2c";
};
- pinmux_pwm: pwm {
+ pinmux_pwm: pwm-pins {
groups = "pwm0_grp", "pwm1_grp",
"pwm2_grp", "pwm3_grp";
function = "pwm";
};
- pinmux_uart1: uart1 {
+ pinmux_uart1: uart1-pins {
groups = "uart1_grp";
function = "uart1";
};
@@ -501,7 +501,7 @@
reg = <0x18004000 0x14>;
};
- nand: nand@18028000 {
+ nand_controller: nand-controller@18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
reg-names = "nand", "iproc-idm", "iproc-ext";
@@ -520,27 +520,27 @@
<0x1811b408 0x004>,
<0x180293a0 0x01c>;
reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "spi_lr_fullness_reached",
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mspi_done",
+ "mspi_halted",
+ "spi_lr_fullness_reached",
"spi_lr_session_aborted",
"spi_lr_impatient",
"spi_lr_session_done",
- "spi_lr_overhead",
- "mspi_done",
- "mspi_halted";
+ "spi_lr_overread";
clocks = <&iprocmed>;
clock-names = "iprocmed";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;
- spi_nor: spi-nor@0 {
+ spi_nor: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325c..cca49a2 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -203,7 +203,7 @@
status = "disabled";
};
- nand: nand@2000 {
+ nand_controller: nand-controller@2000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7c..f92d2cf 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@
};
};
-&nand {
+&nand_controller {
status = "okay";
- nandcs@1 {
+ nand@1 {
compatible = "brcm,nandcs";
reg = <1>;
nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9..5ac2042 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@
reg-names = "aon-ctrl", "aon-sram";
};
- nand: nand@3e2800 {
+ nand_controller: nand-controller@3e2800 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f..a76c74b 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -82,8 +82,8 @@
status = "okay";
};
-&nand {
- nandcs@1 {
+&nand_controller {
+ nand@1 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index 046c59f..de40bd5 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -49,8 +49,8 @@
};
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index b4a1392..dda3e11 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@
status = "okay";
};
-&nand {
- nandcs@1 {
+&nand_controller {
+ nand@1 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
index 3378683..ea3c6b8 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@
status = "okay";
};
-&nand {
- nandcs@1 {
+&nand_controller {
+ nand@1 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 5443fc0..1f73885 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -74,8 +74,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index e1e3c26..b6b9ca8 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -74,8 +74,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index f161ba2..ecf426f 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -90,8 +90,8 @@
};
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 83cb877d..8ca18da 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -78,8 +78,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index 4e106ce..9747378d 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -78,8 +78,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index cda6cc2..0f92b77 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -89,8 +89,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index ffbff00..9e984ca 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -68,8 +68,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 5b17727..df5c8ab 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -31,10 +31,10 @@
status = "okay";
};
-&nand {
+&nand_controller {
status = "okay";
- nandcs@0 {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-ecc-strength = <4>;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index 3fd39c4..5475dab 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -74,8 +74,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 7cf31b6..c3942b4 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -574,8 +574,7 @@
status = "disabled";
};
ehrpwm0: pwm@300000 {
- compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
@@ -584,8 +583,7 @@
status = "disabled";
};
ehrpwm1: pwm@302000 {
- compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
- "ti,am33xx-ehrpwm";
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
@@ -593,9 +591,8 @@
power-domains = <&psc1 17>;
status = "disabled";
};
- ecap0: ecap@306000 {
- compatible = "ti,da850-ecap", "ti,am3352-ecap",
- "ti,am33xx-ecap";
+ ecap0: pwm@306000 {
+ compatible = "ti,da850-ecap", "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
clocks = <&psc1 20>;
@@ -603,9 +600,8 @@
power-domains = <&psc1 20>;
status = "disabled";
};
- ecap1: ecap@307000 {
- compatible = "ti,da850-ecap", "ti,am3352-ecap",
- "ti,am33xx-ecap";
+ ecap1: pwm@307000 {
+ compatible = "ti,da850-ecap", "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
clocks = <&psc1 20>;
@@ -613,9 +609,8 @@
power-domains = <&psc1 20>;
status = "disabled";
};
- ecap2: ecap@308000 {
- compatible = "ti,da850-ecap", "ti,am3352-ecap",
- "ti,am33xx-ecap";
+ ecap2: pwm@308000 {
+ compatible = "ti,da850-ecap", "ti,am3352-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
clocks = <&psc1 20>;
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3551a64..a9e7274 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -314,8 +314,6 @@
#address-cells = <1>;
#size-cells = <0>;
interrupts = <70>;
- dmas = <&edma 58 0 &edma 59 0>;
- dma-names = "tx", "rx";
};
i2c2: i2c@4802a000 {
@@ -325,8 +323,6 @@
#address-cells = <1>;
#size-cells = <0>;
interrupts = <71>;
- dmas = <&edma 60 0 &edma 61 0>;
- dma-names = "tx", "rx";
};
intc: interrupt-controller@48200000 {
@@ -351,7 +347,7 @@
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
- mbox_dsp: mbox_dsp {
+ mbox_dsp: mbox-dsp {
ti,mbox-tx = <3 0 0>;
ti,mbox-rx = <0 0 0>;
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 38530db..87deb6a 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -319,7 +319,7 @@
};
pcf_lcd: gpio@20 {
- compatible = "ti,pcf8575", "nxp,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
@@ -330,7 +330,7 @@
};
pcf_gpio_21: gpio@21 {
- compatible = "ti,pcf8575", "nxp,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x21>;
lines-initial-states = <0x1408>;
gpio-controller;
@@ -362,11 +362,11 @@
clock-frequency = <400000>;
pcf_hdmi: gpio@26 {
- compatible = "ti,pcf8575", "nxp,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
- p1 {
+ hdmi-audio-hog {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
index a25749a..a5bdc64 100644
--- a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -5,17 +5,17 @@
&mailbox5 {
status = "okay";
- mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
status = "okay";
};
- mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
- mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 149144c..956a26d 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1159,7 +1159,7 @@
ranges = <0x0 0x20000 0x1000>;
uart3: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1343,7 +1343,7 @@
};
};
- target-module@55000 { /* 0x48055000, ap 13 0e.0 */
+ gpio2_target: target-module@55000 { /* 0x48055000, ap 13 0e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x55000 0x4>,
<0x55010 0x4>,
@@ -1376,7 +1376,7 @@
};
};
- target-module@57000 { /* 0x48057000, ap 15 06.0 */
+ gpio3_target: target-module@57000 { /* 0x48057000, ap 15 06.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x57000 0x4>,
<0x57010 0x4>,
@@ -1562,7 +1562,7 @@
ranges = <0x0 0x66000 0x1000>;
uart5: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1594,7 +1594,7 @@
ranges = <0x0 0x68000 0x1000>;
uart6: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1626,7 +1626,7 @@
ranges = <0x0 0x6a000 0x1000>;
uart1: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1658,7 +1658,7 @@
ranges = <0x0 0x6c000 0x1000>;
uart2: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1690,7 +1690,7 @@
ranges = <0x0 0x6e000 0x1000>;
uart4: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2424,7 +2424,7 @@
ranges = <0x0 0x20000 0x1000>;
uart7: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2454,7 +2454,7 @@
ranges = <0x0 0x22000 0x1000>;
uart8: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2484,7 +2484,7 @@
ranges = <0x0 0x24000 0x1000>;
uart9: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2561,7 +2561,7 @@
status = "disabled";
ranges = <0 0 0x1000>;
- ecap0: ecap@100 {
+ ecap0: pwm@100 {
compatible = "ti,dra746-ecap",
"ti,am3352-ecap";
#pwm-cells = <3>;
@@ -2607,7 +2607,7 @@
status = "disabled";
ranges = <0 0 0x1000>;
- ecap1: ecap@100 {
+ ecap1: pwm@100 {
compatible = "ti,dra746-ecap",
"ti,am3352-ecap";
#pwm-cells = <3>;
@@ -2653,7 +2653,7 @@
status = "disabled";
ranges = <0 0 0x1000>;
- ecap2: ecap@100 {
+ ecap2: pwm@100 {
compatible = "ti,dra746-ecap",
"ti,am3352-ecap";
#pwm-cells = <3>;
@@ -4129,28 +4129,6 @@
};
};
- usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */
- compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x140000 0x4>,
- <0x140010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
- ti,sysc-midle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
- clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x140000 0x20000>;
- };
-
target-module@170000 { /* 0x48970000, ap 21 0a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x170010 0x4>;
@@ -4530,7 +4508,7 @@
ranges = <0x0 0xb000 0x1000>;
uart10: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 6d2cca6..a643644 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -187,7 +187,7 @@
};
&pcf_hdmi {
- p0 {
+ hdmi-i2c-disable-hog {
/*
* PM_OEn to High: Disable routing I2C3 to PM_I2C
* With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi
index cad0e4a..9c270d8 100644
--- a/arch/arm/boot/dts/dra71x.dtsi
+++ b/arch/arm/boot/dts/dra71x.dtsi
@@ -11,7 +11,3 @@
&rtctarget {
status = "disabled";
};
-
-&usb4_tm {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index b65b2dd..f128252 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -226,7 +226,7 @@
};
pcf_gpio_21: gpio@21 {
- compatible = "ti,pcf8575", "nxp,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x21>;
lines-initial-states = <0x1408>;
gpio-controller;
@@ -256,7 +256,7 @@
clock-frequency = <400000>;
pcf_hdmi: pcf8575@26 {
- compatible = "ti,pcf8575", "nxp,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
@@ -268,7 +268,7 @@
*/
lines-initial-states = <0x0f2b>;
- p1 {
+ hdmi-audio-hog {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index d403acc..9061726 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -77,12 +77,12 @@
};
&mailbox5 {
- mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
ti,mbox-tx = <6 2 2>;
ti,mbox-rx = <4 2 2>;
status = "disabled";
};
- mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
ti,mbox-tx = <5 2 2>;
ti,mbox-rx = <1 2 2>;
status = "disabled";
@@ -90,7 +90,7 @@
};
&mailbox6 {
- mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
ti,mbox-tx = <6 2 2>;
ti,mbox-rx = <4 2 2>;
status = "disabled";
@@ -108,7 +108,3 @@
&pcie2_rc {
compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
};
-
-&usb4_tm {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
index b1147a4..3256631 100644
--- a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -6,7 +6,7 @@
#include "dra7-ipu-dsp-common.dtsi"
&mailbox6 {
- mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index e1850d6..cfb39dd 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -49,49 +49,6 @@
reg = <0x41500000 0x100>;
};
- target-module@48940000 {
- compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x48940000 0x4>,
- <0x48940010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
- ti,sysc-midle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x48940000 0x20000>;
-
- omap_dwc3_4: omap_dwc3_4@0 {
- compatible = "ti,dwc3";
- reg = <0 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <1>;
- utmi-mode = <2>;
- ranges;
- status = "disabled";
- usb4: usb@10000 {
- compatible = "snps,dwc3";
- reg = <0x10000 0x17000>;
- interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "peripheral",
- "host",
- "otg";
- maximum-speed = "high-speed";
- dr_mode = "otg";
- };
- };
- };
target-module@41501000 {
compatible = "ti,sysc-omap2", "ti,sysc";
@@ -188,12 +145,12 @@
};
&mailbox5 {
- mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
ti,mbox-tx = <6 2 2>;
ti,mbox-rx = <4 2 2>;
status = "disabled";
};
- mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
ti,mbox-tx = <5 2 2>;
ti,mbox-rx = <1 2 2>;
status = "disabled";
@@ -201,12 +158,12 @@
};
&mailbox6 {
- mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
ti,mbox-tx = <6 2 2>;
ti,mbox-rx = <4 2 2>;
status = "disabled";
};
- mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
ti,mbox-tx = <5 2 2>;
ti,mbox-rx = <1 2 2>;
status = "disabled";
@@ -224,3 +181,52 @@
&pcie2_rc {
compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
};
+
+&l4_per3 {
+ segment@0 {
+ usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x140000 0x4>,
+ <0x140010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+ clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x140000 0x20000>;
+
+ omap_dwc3_4: omap_dwc3_4@0 {
+ compatible = "ti,dwc3";
+ reg = <0 0x10000>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ status = "disabled";
+ usb4: usb@10000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000 0x17000>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 9bd01ae..e2b7fcb 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -158,12 +158,6 @@
regulator-max-microvolt = <1800000>;
};
- clk_ov5640_fixed: clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- };
-
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
@@ -355,7 +349,7 @@
};
pcf_lcd: pcf8757@20 {
- compatible = "ti,pcf8575", "nxp,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
@@ -366,7 +360,7 @@
};
pcf_gpio_21: pcf8757@21 {
- compatible = "ti,pcf8575", "nxp,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
@@ -377,11 +371,11 @@
};
pcf_hdmi: pcf8575@26 {
- compatible = "ti,pcf8575", "nxp,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
- p1 {
+ hdmi-audio-hog {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
@@ -406,27 +400,6 @@
};
};
-&i2c5 {
- status = "okay";
- clock-frequency = <400000>;
-
- ov5640@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
-
- clocks = <&clk_ov5640_fixed>;
- clock-names = "xclk";
-
- port {
- csi2_cam0: endpoint {
- remote-endpoint = <&csi2_phy0>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
- };
- };
-};
-
&cpu0 {
vdd-supply = <&buck10_reg>;
};
@@ -573,14 +546,6 @@
};
};
-&csi2_0 {
- csi2_phy0: endpoint {
- remote-endpoint = <&csi2_cam0>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
-};
-
&ipu2 {
status = "okay";
memory-region = <&ipu2_cma_pool>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index c52b9cf..f6ba5e4 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -653,7 +653,7 @@
mmc-pwrseq = <&wlan_pwrseq>;
brcmf: wifi@1 {
- compatible = "brcm,bcm4334-fmac";
+ compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpx1>;
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 525ff3d..55922176 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -314,7 +314,8 @@
};
&fimc_1 {
- status = "okay";
+ /* Back camera not implemented */
+ status = "disabled";
assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
@@ -330,7 +331,8 @@
};
&fimc_3 {
- status = "okay";
+ /* Back camera not implemented */
+ status = "disabled";
assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
@@ -806,7 +808,7 @@
pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
brcmf: wifi@1 {
- compatible = "brcm,bcm4330-fmac";
+ compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpx2>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index d2406c9..3eb8df3 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -521,7 +521,7 @@
pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
brcmf: wifi@1 {
- compatible = "brcm,bcm4330-fmac";
+ compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpx2>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index dd44ad2..f0528532 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -614,7 +614,7 @@
pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
brcmf: wifi@1 {
- compatible = "brcm,bcm4330-fmac";
+ compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpx2>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index 4583d34..b3726d4 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -163,6 +163,7 @@
<1025000>, <950000>,
<918750>, <900000>,
<875000>, <831250>;
+ wakeup-source;
regulators {
ldo1_reg: LDO1 {
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index fc77c1b..968c794 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -668,6 +668,7 @@
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&max77686_irq>;
pinctrl-names = "default";
+ wakeup-source;
reg = <0x09>;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index c49dbb7..2c79214 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -50,8 +50,8 @@
reg = <0x48>;
interrupt-parent = <&gpm2>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
- x-size = <720>;
- y-size = <1280>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
avdd-supply = <&ldo23_reg>;
vdd-supply = <&ldo24_reg>;
};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 5bd0586..5b1d459 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -282,6 +282,7 @@
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
reg = <0x09>;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e1f6de5..5479ef0 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -144,6 +144,7 @@
<1200000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>;
+ wakeup-source;
s5m8767_osc: clocks {
compatible = "samsung,s5m8767-clk";
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 9e75089..22c3086 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -325,6 +325,7 @@
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&max77686_irq>;
pinctrl-names = "default";
+ wakeup-source;
reg = <0x09>;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index a161f623..a771542 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -218,6 +218,7 @@
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s5m8767_irq>;
+ wakeup-source;
vinb1-supply = <&main_dc_reg>;
vinb2-supply = <&main_dc_reg>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 949c072..884fef5 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -190,6 +190,7 @@
pinctrl-names = "default";
pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
<&pmic_dvs_3>;
+ wakeup-source;
#clock-cells = <1>;
inl1-supply = <&buck5_reg>;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 1aad485..dfc7f14 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -352,6 +352,7 @@
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps11_irq>;
+ wakeup-source;
s2mps11_osc: clocks {
compatible = "samsung,s2mps11-clk";
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index d506da9..a4f0e3f 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -132,6 +132,7 @@
pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
+ wakeup-source;
s2mps11_osc: clocks {
compatible = "samsung,s2mps11-clk";
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 6d690b1..e7958db 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -512,6 +512,7 @@
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps11_irq>;
+ wakeup-source;
s2mps11_osc: clocks {
compatible = "samsung,s2mps11-clk";
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 20c222b3..d91f7fa 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -22,7 +22,7 @@
label = "blue:heartbeat";
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
- max_brightness = <255>;
+ max-brightness = <255>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index ede7822..1c24f9b 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -24,7 +24,7 @@
label = "blue:heartbeat";
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
- max_brightness = <255>;
+ max-brightness = <255>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
index 2fc3e86..982752e 100644
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -22,7 +22,7 @@
* Green LED is much brighter than the others
* so limit its max brightness
*/
- max_brightness = <127>;
+ max-brightness = <127>;
linux,default-trigger = "mmc0";
};
@@ -30,7 +30,7 @@
label = "blue:heartbeat";
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
- max_brightness = <255>;
+ max-brightness = <255>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index cc39289..c79a2a0 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -61,9 +61,9 @@
#size-cells = <0>;
/* Collides with IDE pins, that's cool (we do not use them) */
- gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
@@ -169,7 +169,7 @@
* The touchpad input is connected to a GPIO bit-banged
* I2C bus.
*/
- gpio-i2c {
+ i2c {
compatible = "i2c-gpio";
/* Collides with ICE */
sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -492,8 +492,7 @@
display-controller@6a000000 {
status = "okay";
- port@0 {
- reg = <0>;
+ port {
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index c6f3d90..eba1c94 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -82,7 +82,7 @@
/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
- gpio-i2c {
+ i2c {
compatible = "i2c-gpio";
sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -140,7 +140,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
/* Uses MDC and MDIO */
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 43c45f7..13112a8 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 9611ddf..0ebda4e 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -125,18 +125,6 @@
};
};
- ethernet@60000000 {
- status = "okay";
-
- ethernet-port@0 {
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet-port@1 {
- /* Not used in this platform */
- };
- };
-
usb@68000000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
index a0916d3..c78e55f 100644
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -87,9 +87,9 @@
#address-cells = <1>;
#size-cells = <0>;
/* Check pin collisions */
- gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 0c6e6d3..1b64cc8 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -72,9 +72,9 @@
#address-cells = <1>;
#size-cells = <0>;
/* Check pin collisions */
- gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761d..5602ba8 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc..a4a260c 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 065ed10..cc053af 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -191,7 +191,7 @@
};
rtc@45000000 {
- compatible = "cortina,gemini-rtc";
+ compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
reg = <0x45000000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_RTC>;
@@ -286,6 +286,7 @@
clock-names = "PCLK", "PCICLK";
pinctrl-names = "default";
pinctrl-0 = <&pci_default_pins>;
+ device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
@@ -356,6 +357,14 @@
};
};
+ crypto: crypto@62000000 {
+ compatible = "cortina,sl3516-crypto";
+ reg = <0x62000000 0x10000>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ resets = <&syscon GEMINI_RESET_SECURITY>;
+ clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
+ };
+
ide@63000000 {
compatible = "cortina,gemini-pata", "faraday,ftide010";
reg = <0x63000000 0x1000>;
@@ -409,8 +418,6 @@
clock-names = "PCLK", "TVE";
pinctrl-names = "default";
pinctrl-0 = <&tvc_default_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 905900b..cf48ec1 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Hisilicon Ltd. Hi3620 SoC
+ * HiSilicon Ltd. Hi3620 SoC
*
- * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 HiSilicon Ltd.
* Copyright (C) 2012-2013 Linaro Ltd.
*
* Author: Haojian Zhuang <haojian.zhuang@linaro.org>
diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts
index 0314763..f3faf24 100644
--- a/arch/arm/boot/dts/hip01-ca9x2.dts
+++ b/arch/arm/boot/dts/hip01-ca9x2.dts
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Hisilicon Ltd. HiP01 SoC
+ * HiSilicon Ltd. HiP01 SoC
*
- * Copyright (C) 2014 Hisilicon Ltd.
+ * Copyright (C) 2014 HiSilicon Ltd.
* Copyright (C) 2014 Huawei Ltd.
*
* Author: Wang Long <long.wanglong@huawei.com>
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 2a79636..e17f36b 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Hisilicon Ltd. HiP01 SoC
+ * HiSilicon Ltd. HiP01 SoC
*
- * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 HiSilicon Ltd.
* Copyright (c) 2014 Huawei Ltd.
*
* Author: Wang Long <long.wanglong@huawei.com>
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index bccf5ba..2424cc5 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Hisilicon Ltd. HiP04 SoC
+ * HiSilicon Ltd. HiP04 SoC
*
- * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 HiSilicon Ltd.
* Copyright (C) 2013-2014 Linaro Ltd.
*
* Author: Haojian Zhuang <haojian.zhuang@linaro.org>
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
index 22b122d..7758c19 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 9721138..dc991ba 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
*/
#include <dt-bindings/clock/hix5hd2-clock.h>
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index f984b70..908caf8 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -563,15 +563,15 @@
#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000
#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000
-#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__GPIO_1_0 0x1f4 0x3f0 0x000 0x00 0x000
#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x06 0x000
#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x02 0x000
-#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__GPIO_1_1 0x1f8 0x3f4 0x000 0x00 0x000
#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x02 0x001
#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x06 0x001
-#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__GPIO_1_2 0x1fc 0x3f8 0x000 0x00 0x000
#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000
#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001
#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001
@@ -580,18 +580,18 @@
#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000
#define MX25_PAD_GPIO_C__CSPI2_SS2 0x1fc 0x3f8 0x000 0x07 0x000
-#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__GPIO_1_3 0x200 0x3fc 0x000 0x00 0x000
#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001
#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001
#define MX25_PAD_GPIO_D__CSPI3_SS2 0x200 0x3fc 0x4c4 0x07 0x001
-#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__GPIO_1_4 0x204 0x400 0x000 0x00 0x000
#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002
#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000
#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x04 0x000
#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x06 0x002
-#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__GPIO_1_5 0x208 0x404 0x000 0x00 0x000
#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000
#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x04 0x000
#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x06 0x000
diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi b/arch/arm/boot/dts/imx28-lwe.dtsi
new file mode 100644
index 0000000..bb971e6
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-lwe.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+ aliases {
+ spi2 = &ssp3;
+ };
+
+ chosen {
+ bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1";
+ };
+
+ memory@40000000 {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ reg_3v3: regulator-reg-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb_5v: regulator-reg-usb-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_fec_3v3: regulator-reg-fec-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fec-phy";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&duart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&saif0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif0_pins_a>;
+ #sound-dai-cells = <0>;
+ assigned-clocks = <&clks 53>;
+ assigned-clock-rates = <12000000>;
+ status = "okay";
+};
+
+&saif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif1_pins_a>;
+ fsl,saif-master = <&saif0>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&spi3_pins_a {
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__SSP3_D4
+ MX28_PAD_AUART2_TX__SSP3_D5
+ MX28_PAD_SSP3_SCK__SSP3_SCK
+ MX28_PAD_SSP3_MOSI__SSP3_CMD
+ MX28_PAD_SSP3_MISO__SSP3_D0
+ MX28_PAD_SSP3_SS0__SSP3_D3
+ MX28_PAD_AUART2_TX__GPIO_3_9
+ >;
+};
+
+&ssp0 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a>;
+ bus-width = <8>;
+ vmmc-supply = <®_3v3>;
+ non-removable;
+ status = "okay";
+};
+
+&ssp2 {
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+};
+
+&ssp3 {
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_pins_a>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "env0";
+ reg = <0x80000 0x10000>;
+ };
+
+ partition@90000 {
+ label = "env1";
+ reg = <0x90000 0x10000>;
+ };
+
+ partition@100000 {
+ label = "kernel";
+ reg = <0x100000 0x400000>;
+ };
+
+ partition@500000 {
+ label = "swupdate";
+ reg = <0x500000 0x800000>;
+ };
+ };
+ };
+};
+
+&usb0 {
+ vbus-supply = <®_usb_5v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usb1 {
+ vbus-supply = <®_usb_5v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins_b>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/imx28-xea.dts
new file mode 100644
index 0000000..a400c10
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-xea.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-lwe.dtsi"
+
+/ {
+ compatible = "lwn,imx28-xea", "fsl,imx28";
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can1_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a &hog_pins_tiva>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D00__GPIO_0_0
+ MX28_PAD_GPMI_D02__GPIO_0_2
+ MX28_PAD_GPMI_D05__GPIO_0_5
+ MX28_PAD_GPMI_CE1N__GPIO_0_17
+ MX28_PAD_GPMI_RDY0__GPIO_0_20
+ MX28_PAD_GPMI_RDY1__GPIO_0_21
+ MX28_PAD_GPMI_RDY2__GPIO_0_22
+ MX28_PAD_GPMI_RDN__GPIO_0_24
+ MX28_PAD_GPMI_CLE__GPIO_0_27
+ MX28_PAD_LCD_VSYNC__GPIO_1_28
+ MX28_PAD_SSP1_SCK__GPIO_2_12
+ MX28_PAD_SSP1_CMD__GPIO_2_13
+ MX28_PAD_SSP2_SS1__GPIO_2_20
+ MX28_PAD_SSP2_SS2__GPIO_2_21
+ MX28_PAD_LCD_D00__GPIO_1_0
+ MX28_PAD_LCD_D01__GPIO_1_1
+ MX28_PAD_LCD_D02__GPIO_1_2
+ MX28_PAD_LCD_D03__GPIO_1_3
+ MX28_PAD_LCD_D04__GPIO_1_4
+ MX28_PAD_LCD_D05__GPIO_1_5
+ MX28_PAD_LCD_D06__GPIO_1_6
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ hog_pins_tiva: hog@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_RDY3__GPIO_0_23
+ MX28_PAD_GPMI_WRN__GPIO_0_25
+ >;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ hog_pins_coding: hog@2 {
+ reg = <2>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D01__GPIO_0_1
+ MX28_PAD_GPMI_D03__GPIO_0_3
+ MX28_PAD_GPMI_D04__GPIO_0_4
+ MX28_PAD_GPMI_D06__GPIO_0_6
+ MX28_PAD_GPMI_D07__GPIO_0_7
+ >;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+};
+
+®_fec_3v3 {
+ gpio = <&gpio0 0 0>;
+};
+
+®_usb_5v {
+ gpio = <&gpio0 2 0>;
+};
+
+&spi2_pins_a {
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__SSP2_SCK
+ MX28_PAD_SSP2_MOSI__SSP2_CMD
+ MX28_PAD_SSP2_MISO__SSP2_D0
+ MX28_PAD_SSP2_SS0__GPIO_2_19
+ >;
+};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
index 16addb3..7d49704 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -206,7 +206,7 @@
pinctrl-0 = <&pinctrl_weim>;
status = "okay";
- lan9221: lan9221@5,0 {
+ lan9221: ethernet@5,0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lan9221>;
compatible = "smsc,lan9221", "smsc,lan9115";
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 9a2e1fd..6208fbb 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -24,7 +24,7 @@
reg = <0xf4000000 0x3ff0000>;
ranges;
- lan9220@f4000000 {
+ ethernet@f4000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
diff --git a/arch/arm/boot/dts/imx6dl-b105pv2.dts b/arch/arm/boot/dts/imx6dl-b105pv2.dts
new file mode 100644
index 0000000..411aa72d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b105pv2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B105Pv2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+ model = "General Electric B105Pv2";
+ compatible = "ge,imx6dl-b105pv2", "congatec,qmx6", "fsl,imx6dl";
+
+ panel {
+ compatible = "auo,g101evn010";
+ };
+};
+
+&i2c3 {
+ touchscreen@41 {
+ compatible = "ilitek,ili251x";
+ reg = <0x41>;
+ pinctrl-names = "default";
+ pinctrl-0 =<&pinctrl_q7_gpio0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <1280>;
+ touchscreen-size-y = <800>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-b105v2.dts b/arch/arm/boot/dts/imx6dl-b105v2.dts
new file mode 100644
index 0000000..d011127
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b105v2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B105v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+ model = "General Electric B105v2";
+ compatible = "ge,imx6dl-b105v2", "congatec,qmx6", "fsl,imx6dl";
+
+ panel {
+ compatible = "auo,g101evn010";
+ };
+};
+
+&i2c3 {
+ touchscreen@41 {
+ compatible = "ilitek,ili251x";
+ reg = <0x41>;
+ pinctrl-names = "default";
+ pinctrl-0 =<&pinctrl_q7_gpio0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <1280>;
+ touchscreen-size-y = <800>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-b125pv2.dts b/arch/arm/boot/dts/imx6dl-b125pv2.dts
new file mode 100644
index 0000000..ca840fa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b125pv2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B125Pv2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+ model = "General Electric B125Pv2";
+ compatible = "ge,imx6dl-b125pv2", "congatec,qmx6", "fsl,imx6dl";
+
+ panel {
+ compatible = "auo,g121ean01";
+ };
+};
+
+&i2c3 {
+ touchscreen@2a {
+ compatible = "eeti,exc80h60";
+ reg = <0x2a>;
+ pinctrl-names = "default";
+ pinctrl-0 =<&pinctrl_q7_gpio0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-b125v2.dts b/arch/arm/boot/dts/imx6dl-b125v2.dts
new file mode 100644
index 0000000..81e5a9c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b125v2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B125v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+ model = "General Electric B125v2";
+ compatible = "ge,imx6dl-b125v2", "congatec,qmx6", "fsl,imx6dl";
+
+ panel {
+ compatible = "auo,g121ean01";
+ };
+};
+
+&i2c3 {
+ touchscreen@2a {
+ compatible = "eeti,exc80h60";
+ reg = <0x2a>;
+ pinctrl-names = "default";
+ pinctrl-0 =<&pinctrl_q7_gpio0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-b155v2.dts b/arch/arm/boot/dts/imx6dl-b155v2.dts
new file mode 100644
index 0000000..c861937
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b155v2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B155v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+ model = "General Electric B155v2";
+ compatible = "ge,imx6dl-b155v2", "congatec,qmx6", "fsl,imx6dl";
+
+ panel {
+ compatible = "auo,g156xtn01";
+ };
+};
+
+&i2c3 {
+ touchscreen@2a {
+ compatible = "eeti,exc80h84";
+ reg = <0x2a>;
+ pinctrl-names = "default";
+ pinctrl-0 =<&pinctrl_q7_gpio0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
new file mode 100644
index 0000000..ec5b664
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B1x5Pv2
+// patient monitor series
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+#include <dt-bindings/input/input.h>
+#include "imx6dl-qmx6.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ /* Do not allow frequencies above 800MHz */
+ cpus {
+ cpu@0 {
+ operating-points = <
+ /* kHz uV */
+ 792000 1175000
+ 396000 1150000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 792000 1175000
+ 396000 1175000
+ >;
+ };
+
+ cpu@1 {
+ operating-points = <
+ /* kHz uV */
+ 792000 1175000
+ 396000 1150000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 792000 1175000
+ 396000 1175000
+ >;
+ };
+ };
+
+ reg_syspwr: regulator-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "SYS_PWR";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ reg_5v_pmc: regulator-5v-pmc {
+ compatible = "regulator-fixed";
+ regulator-name = "5V PMC";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_syspwr>;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_syspwr>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_syspwr>;
+ };
+
+ reg_5v0_audio: regulator-5v0-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "5V0_AUDIO";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v>;
+ gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ /*
+ * This must be always-on for da7212, which has some not
+ * properly documented dependencies for it's speaker supply
+ * pin. The issue manifests as speaker volume being very low.
+ */
+ regulator-always-on;
+ };
+
+
+ reg_3v3_audio: regulator-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3_AUDIO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_3v3>;
+ pinctrl-0 = <&pinctrl_q7_hda_reset>;
+ pinctrl-names = "default";
+ gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_2v5_audio: regulator-2v5-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "2V5_AUDIO";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ vin-supply = <®_3v3_audio>;
+
+ };
+
+ reg_wlan: regulator-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "WLAN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_q7_sdio_power>;
+ gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <70000>;
+ };
+
+ reg_bl: regulator-backlight {
+ compatible = "regulator-fixed";
+ regulator-name = "LED_VCC";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <®_syspwr>;
+ pinctrl-0 = <&pinctrl_q7_lcd_power>;
+ pinctrl-names = "default";
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lcd: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v>;
+ };
+
+ usb_power: regulator-usb-power {
+ compatible = "regulator-fixed";
+ regulator-name = "USB POWER";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v>;
+ };
+
+ charger: battery-charger {
+ compatible = "gpio-charger"; /* ti,bq24172 */
+ charger-type = "mains";
+ gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>;
+ charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>,
+ <&tca6424a 12 GPIO_ACTIVE_HIGH>;
+ charge-current-limit-mapping = <1300000 0x0>,
+ <700000 0x1>,
+ <0 0x2>;
+ charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_q7_spi_cs1>;
+ gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+ };
+
+ power-button-key {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_q7_sleep_button>;
+
+ power-button {
+ label = "power button";
+ gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ rotary-encoder-key {
+ compatible = "gpio-keys";
+
+ rotary-encoder-press {
+ label = "rotary-encoder press";
+ gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_ENTER>;
+ linux,can-disable;
+ };
+ };
+
+ rotary-encoder {
+ compatible = "rotary-encoder";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>;
+ gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>;
+ rotary-encoder,relative-axis;
+ rotary-encoder,steps-per-period = <2>;
+ wakeup-source;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
+
+ alarm1 {
+ label = "alarm:red";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ alarm2 {
+ label = "alarm:yellow";
+ gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ alarm3 {
+ label = "alarm:blue";
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_q7_backlight_enable>;
+ power-supply = <®_bl>;
+ pwms = <&pwm4 0 5000000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <179>;
+ enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ panel {
+ backlight = <&backlight>;
+ power-supply = <®_lcd>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets = "Speaker", "Ext Spk";
+ simple-audio-card,audio-routing = "Ext Spk", "LINE";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ clk_ext_audio_codec: clock-codec {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+};
+
+&audmux {
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ battery: battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>;
+ sbs,i2c-retry-count = <5>;
+ power-supplies = <&charger>;
+ };
+
+ codec: audio-codec@1a {
+ compatible = "dlg,da7212";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ VDDA-supply = <®_2v5_audio>;
+ VDDSP-supply = <®_5v0_audio>;
+ VDDMIC-supply = <®_3v3_audio>;
+ VDDIO-supply = <®_3v3_audio>;
+ clocks = <&clk_ext_audio_codec>;
+ clock-names = "mclk";
+ };
+};
+
+&i2c5 {
+ tca6424a: gpio-controller@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_3v3>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_q7_gpio6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN",
+ "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF",
+ "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0",
+ "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
+ "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL",
+ "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2";
+
+ };
+
+ tmp75: temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ vs-supply = <®_3v3>;
+ interrupt-parent = <&tca6424a>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ status = "okay";
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&usb_power>;
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+
+ /*
+ * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N.
+ * On QMX6 this is not connceted to the i.MX6, but to the USB Hub
+ * from &usbh1. This means, that we cannot easily detect and handle
+ * over-current events. Fortunately the regulator limits the current
+ * automatically, so the hardware is still protected.
+ */
+};
+
+&usdhc4 {
+ /* WiFi module */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ wakeup-source;
+ keep-power-in-suspend;
+ cap-power-off-card;
+ max-frequency = <25000000>;
+ vmmc-supply = <®_wlan>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_q7_gpio7>;
+
+ interrupt-parent = <&gpio4>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+ tcxo-clock-frequency = <26000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
new file mode 100644
index 0000000..a326a33
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B1x5v2
+// patient monitor series
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+#include <dt-bindings/input/input.h>
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+ reg_3v3_acm: regulator-3v3-acm {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3 ACM";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <®_3v3>;
+ };
+};
+
+&i2c1 {
+ tca6416: gpio-controller@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ reset-gpios = <&tca6424a 9 GPIO_ACTIVE_LOW>;
+ vcc-supply = <®_3v3_acm>;
+ gpio-line-names = "ACM1_EN", "ACM1_CL0", "ACM1_CL1", "ACM1_CL2",
+ "", "ACM2_EN", "ACM2_CL0", "ACM2_CL1",
+ "ACM2_CL2", "", "", "",
+ "", "", "", "";
+
+ /*
+ * The interrupt pin is connected to &tca6424a pin 1, but the Linux
+ * TCA6424 driver cannot handle low type interrupts at the moment
+ * (and support cannot be added without some ugly hacks). Since this
+ * controller does not have any input type GPIOs, just pretend
+ * that the interrupt pin is unconnected.
+ */
+ };
+};
+
+&i2c5 {
+ mpl3115a2: pressure-sensor@60 {
+ compatible = "fsl,mpl3115";
+ reg = <0x60>;
+ vcc-supply = <®_3v3_acm>;
+
+ /*
+ * The MPL3115 interrupts are connected to pin 22 and 23
+ * of &tca6424a, but the binding does not yet support
+ * interrupts.
+ */
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index 4d0d3d3..60fe5f1 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -138,8 +138,6 @@
interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
- touchscreen-size-x = <800>;
- touchscreen-size-y = <480>;
touchscreen-inverted-x;
touchscreen-inverted-y;
touchscreen-max-pressure = <4095>;
@@ -147,7 +145,9 @@
ti,vref-delay-usecs = /bits/ 16 <100>;
ti,x-plate-ohms = /bits/ 16 <800>;
ti,y-plate-ohms = /bits/ 16 <300>;
-
+ ti,debounce-max = /bits/ 16 <3>;
+ ti,debounce-tol = /bits/ 16 <70>;
+ ti,debounce-rep = /bits/ 16 <3>;
wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index ae6da24..190d266 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -21,14 +21,11 @@
backlight_lcd: backlight-lcd {
compatible = "pwm-backlight";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_backlight>;
- pwms = <&pwm1 0 500000>;
+ pwms = <&pwm1 0 500000 0>;
brightness-levels = <0 20 81 248 1000>;
default-brightness-level = <20>;
num-interpolated-steps = <21>;
power-supply = <®_bl_12v0>;
- enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
};
keys {
@@ -223,6 +220,24 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
+
+ touchscreen@0 {
+ compatible = "ti,tsc2046";
+ reg = <0>;
+ pinctrl-0 = <&pinctrl_tsc>;
+ pinctrl-names ="default";
+ spi-max-frequency = <100000>;
+ interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
+ pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ touchscreen-max-pressure = <4095>;
+ ti,vref-delay-usecs = /bits/ 16 <100>;
+ ti,x-plate-ohms = /bits/ 16 <800>;
+ ti,y-plate-ohms = /bits/ 16 <300>;
+ ti,debounce-max = /bits/ 16 <3>;
+ ti,debounce-tol = /bits/ 16 <70>;
+ ti,debounce-rep = /bits/ 16 <3>;
+ wakeup-source;
+ };
};
&i2c1 {
@@ -261,7 +276,6 @@
};
&pwm1 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
@@ -276,8 +290,6 @@
};
&ssi1 {
- #sound-dai-cells = <0>;
- fsl,mode = "ac97-slave";
status = "okay";
};
@@ -285,10 +297,6 @@
status = "disabled";
};
-&vpu {
- status = "disabled";
-};
-
&iomuxc {
pinctrl_audmux: audmuxgrp {
fsl,pins = <
@@ -300,12 +308,6 @@
>;
};
- pinctrl_backlight: backlightgrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
- >;
- };
-
pinctrl_can1phy: can1phy {
fsl,pins = <
/* CAN1_SR */
diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
new file mode 100644
index 0000000..150d698
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for i.MX6DL based congatec QMX6
+// System on Module
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+// Copyright 2016 congatec AG
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ memory@10000000 {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ i2cmux {
+ compatible = "i2c-mux-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+ i2c-parent = <&i2c2>;
+
+ i2c5: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c6: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+
+ audmux_ssi1 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
+ IMX_AUDMUX_V2_PTCR_SYN)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
+ >;
+ };
+
+ audmux_aud6 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT6>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+ >;
+ };
+};
+
+&clks {
+ clocks = <&rtc_sqw>;
+ clock-names = "ckil";
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+ <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sst,sst25vf032b", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0000000 0x100000>;
+ };
+
+ partition@100000 {
+ label = "user";
+ reg = <0x0100000 0x2fc000>;
+ };
+
+ partition@3fc000 {
+ label = "reserved";
+ reg = <0x03fc000 0x4000>;
+ read-only;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
+ phy-mode = "rgmii-id";
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ fsl,magic-packet;
+ phy-handle = <&phy0>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@6 {
+ reg = <6>;
+ qca,clk-out-frequency = <125000000>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ rtc: m41t62@68 {
+ compatible = "st,m41t62";
+ reg = <0x68>;
+
+ rtc_sqw: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
+
+&i2c6 {
+ pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /*
+ * keep VGEN3, VGEN4 and VGEN5 enabled in order to
+ * maintain backward compatibility with hw-rev. A.0
+ */
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* supply voltage for eMMC */
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&pcie {
+ reset-gpio = <&gpio1 20 0>;
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+®_arm {
+ vin-supply = <&sw1a_reg>;
+};
+
+®_pu {
+ vin-supply = <&sw1c_reg>;
+};
+
+®_soc {
+ vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbh1 {
+ /* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
+ vbus-supply = <®_5v>;
+ status = "okay";
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+&usdhc2 {
+ /* MicroSD card slot */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc3 {
+ /* eMMC module */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ non-removable;
+ bus-width = <8>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ qmx6mux: imx6qdl-qmx6 {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x110b0 /* Q7[67] HDA_SDO */
+ MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x30b0 /* Q7[59] HDA_SYNC */
+ MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x30b0 /* Q7[65] HDA_SDI */
+ MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x30b0 /* Q7[63] HDA_BITCLK */
+ >;
+ };
+
+ /* PHY is on System on Module, Q7[3-15] have Ethernet lines */
+ pinctrl_enet: enet {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* PCIE_WAKE_B */
+ MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x80000000 /* I2C multiplexer */
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* SD4_CD# */
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* SD4_WP */
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x80000000 /* Camera MCLK */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 /* Q7[66] I2C_CLK */
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 /* Q7[68] I2C_DAT */
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x1b0b0 /* Q7[66] I2C_CLK */
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b0 /* Q7[68] I2C_DAT */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpio {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
+ >;
+ };
+
+ pinctrl_i2c3: i2c3 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 /* Q7[60] SMB_CLK */
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 /* Q7[62] SMB_DAT */
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3-gpio {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 /* Q7[60] SMB_CLK */
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* Q7[62] SMB_DAT */
+ >;
+ };
+
+ pinctrl_phy_reset: phy-reset {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* RGMII Phy Reset */
+ >;
+ };
+
+ pinctrl_pwm4: pwm4 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
+ >;
+ };
+
+ pinctrl_q7_backlight_enable: q7-backlight-enable {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* Q7[112] LVDS_BLEN */
+ >;
+ };
+
+ pinctrl_q7_gpio0: q7-gpio0 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 /* Q7[185] GPIO0 */
+ >;
+ };
+
+ pinctrl_q7_gpio1: q7-gpio1 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* Q7[186] GPIO1 */
+ >;
+ };
+
+ pinctrl_q7_gpio2: q7-gpio2 {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 /* Q7[187] GPIO2 */
+ >;
+ };
+
+ pinctrl_q7_gpio3: q7-gpio3 {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0 /* Q7[188] GPIO3 */
+ >;
+ };
+
+ pinctrl_q7_gpio4: q7-gpio4 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* Q7[189] GPIO4 */
+ >;
+ };
+
+ pinctrl_q7_gpio5: q7-gpio5 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* Q7[190] GPIO5 */
+ >;
+ };
+
+ pinctrl_q7_gpio6: q7-gpio6 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0 /* Q7[191] GPIO6 */
+ >;
+ };
+
+ pinctrl_q7_gpio7: q7-gpio7 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* Q7[192] GPIO7 */
+ >;
+ };
+
+ pinctrl_q7_hda_reset: q7-hda-reset {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 /* Q7[61] HDA_RST_N */
+ >;
+ };
+
+ pinctrl_q7_lcd_power: lcd-power {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* Q7[111] LVDS_PPEN */
+ >;
+ };
+
+ pinctrl_q7_sdio_power: q7-sdio-power {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 /* Q7[47] SDIO_PWR# */
+ >;
+ };
+
+ pinctrl_q7_sleep_button: q7-sleep-button {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 /* Q7[21] SLP_BTN# */
+ >;
+ };
+
+ pinctrl_q7_spi_cs1: spi-cs1 {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0 /* Q7[202] SPI_CS1# */
+ >;
+ };
+
+ /* SPI1 bus does not leave System on Module */
+ pinctrl_spi1: spi1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0
+ >;
+ };
+
+ /* Debug connector on Q7 module */
+ pinctrl_uart2: uart2 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 /* Q7[177] UART0_RX */
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 /* Q7[171] UART0_TX */
+ >;
+ };
+
+ pinctrl_usbotg: usbotg {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 /* Q7[92] USB_ID */
+ >;
+ };
+
+ /* µSD card slot on Q7 module */
+ pinctrl_usdhc2: usdhc2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2_CD */
+ >;
+ };
+
+ /* eMMC module on Q7 module */
+ pinctrl_usdhc3: usdhc3 {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 /* Q7[45] SDIO_CMD */
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 /* Q7[42] SDIO_CLK */
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 /* Q7[48] SDIO_DAT1 */
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 /* Q7[49] SDIO_DAT0 */
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 /* Q7[50] SDIO_DAT3 */
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 /* Q7[51] SDIO_DAT2 */
+ >;
+ };
+
+ pinctrl_wdog: wdog {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 /* Watchdog output signal */
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab..e7d9bfb 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -106,6 +106,8 @@
reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <1000>;
+ qca,smarteee-tw-us-1g = <24>;
+ qca,clk-out-frequency = <125000000>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 9148a01..cb8b539 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -11,6 +11,8 @@
aliases: aliases {
ethernet1 = ð1;
ethernet2 = ð2;
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc4;
};
backlight: backlight {
@@ -345,6 +347,7 @@
solomon,height = <64>;
solomon,width = <128>;
solomon,page-offset = <0>;
+ solomon,col-offset = <4>;
solomon,prechargep2 = <15>;
reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
vbat-supply = <&sw2_reg>;
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index d0768ae..4bf51f3 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -12,10 +12,20 @@
/ {
aliases {
+ i2c0 = &i2c2;
+ i2c1 = &i2c1;
+ i2c2 = &i2c3;
mmc0 = &usdhc2;
mmc1 = &usdhc3;
mmc2 = &usdhc4;
mmc3 = &usdhc1;
+ rtc0 = &rtc_i2c;
+ rtc1 = &snvs_rtc;
+ serial0 = &uart1;
+ serial1 = &uart5;
+ serial2 = &uart4;
+ serial3 = &uart2;
+ serial4 = &uart3;
};
memory@10000000 {
@@ -23,6 +33,19 @@
reg = <0x10000000 0x40000000>;
};
+ reg_eth_vio: regulator-eth-vio {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pinctrl_enet_vio>;
+ pinctrl-names = "default";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "eth_vio";
+ vin-supply = <&sw2_reg>;
+ };
+
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
@@ -96,30 +119,40 @@
reg = <0>;
max-speed = <100>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
- reset-delay-us = <1000>;
- reset-post-delay-us = <1000>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ smsc,disable-energy-detect; /* Make plugin detection reliable */
};
};
};
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
ltc3676: pmic@3c {
@@ -203,7 +236,7 @@
pagesize = <16>;
};
- rtc@56 {
+ rtc_i2c: rtc@56 {
compatible = "microcrystal,rv3029";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_hw300>;
@@ -260,6 +293,11 @@
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x000b0
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b1
+ >;
+ };
+
+ pinctrl_enet_vio: enet-vio-grp {
+ fsl,pins = <
MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x120b0
>;
};
@@ -285,6 +323,13 @@
>;
};
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c2: i2c2-grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
@@ -292,6 +337,13 @@
>;
};
+ pinctrl_i2c2_gpio: i2c2-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c3: i2c3-grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
@@ -299,6 +351,13 @@
>;
};
+ pinctrl_i2c3_gpio: i2c3-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+ >;
+ };
+
pinctrl_pmic_hw300: pmic-hw300-grp {
fsl,pins = <
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index fa2307d..c713ac0 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -112,7 +112,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-supply = <&vgen2_1v2_eth>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-ds.dts b/arch/arm/boot/dts/imx6q-ds.dts
new file mode 100644
index 0000000..b0a63a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ds.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
+//
+// Based on imx6qdl-sabresd.dtsi which is:
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-ds.dtsi"
+
+/ {
+ model = "DaSheng i.MX6 Quad Com-9xx Board";
+ compatible = "ds,imx6q-sbc", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ds.dtsi b/arch/arm/boot/dts/imx6qdl-ds.dtsi
new file mode 100644
index 0000000..f7e5175
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ds.dtsi
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
+//
+// Based on imx6qdl-sabresd.dtsi which is:
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x80000000>;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-0 {
+ gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+ bus-width = <8>;
+ data-shift = <12>; /* Lines 19:12 used */
+ hsync-active = <1>;
+ vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&ov2659_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
+ status = "okay";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_gpio>;
+ status = "okay";
+
+ m25p80: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p80", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: ethernet-phy@1 {
+ reg = <1>;
+ qca,clk-out-frequency = <125000000>;
+ reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ };
+ };
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_cec>;
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pfuze100: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ ov2659: camera@30 {
+ compatible = "ovti,ov2659";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov2659>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ clock-names = "xvclk";
+ reg = <0x30>;
+ powerdown-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ port {
+ ov2659_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ link-frequencies = /bits/ 64 <70000000>;
+ bus-width = <8>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi1_gpio: ecspi1grpgpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+ >;
+ };
+
+ pinctrl_hdmi_cec: hdmicecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ipu1_csi0: ipu1csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
+ >;
+ };
+
+ pinctrl_ov2659: ov2659grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+ >;
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+ bus-width = <4>;
+ cd-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ status = "okay";
+};
+
+&wdog1 {
+ status = "disabled";
+};
+
+&wdog2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 7bd658b..f323620 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -322,8 +322,8 @@
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1
- MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
>;
};
@@ -410,6 +410,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f824c9a..0c01054 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -97,8 +97,11 @@
compatible = "fsl,imx6q-sabresd-wm8962",
"fsl,imx-audio-wm8962";
model = "wm8962-audio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hp>;
ssi-controller = <&ssi2>;
audio-codec = <&codec>;
+ audio-asrc = <&asrc>;
audio-routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
@@ -545,6 +548,13 @@
>;
};
+ pinctrl_hp: hpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index eb25d21..b9e3057 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -40,6 +40,27 @@
};
};
+ counter-0 {
+ compatible = "interrupt-counter";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_counter0>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+
+ counter-1 {
+ compatible = "interrupt-counter";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_counter1>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ counter-2 {
+ compatible = "interrupt-counter";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_counter2>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
autorepeat;
@@ -254,7 +275,7 @@
&gpio2 {
gpio-line-names =
- "", "", "", "", "", "", "", "",
+ "count0", "count1", "count2", "", "", "", "", "",
"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
"", "", "", "", "", "", "", "ON_SWITCH",
@@ -572,6 +593,24 @@
>;
};
+ pinctrl_counter0: counter0grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b000
+ >;
+ };
+
+ pinctrl_counter1: counter1grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b000
+ >;
+ };
+
+ pinctrl_counter2: counter2grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b000
+ >;
+ };
+
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index b9b698f..bf86b63 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -142,7 +142,6 @@
imx6qdl-wandboard {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x80000000 /* USB Power Enable */
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 5a1e10d..779cc53 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -60,38 +60,26 @@
gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
};
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "mx6ul-wm8960";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&dailink_master>;
- simple-audio-card,frame-master = <&dailink_master>;
- simple-audio-card,widgets =
- "Microphone", "Mic Jack",
- "Line", "Line In",
- "Line", "Line Out",
- "Speaker", "Speaker",
- "Headphone", "Headphone Jack";
- simple-audio-card,routing =
+ sound-wm8960 {
+ compatible = "fsl,imx-audio-wm8960";
+ model = "wm8960-audio";
+ audio-cpu = <&sai2>;
+ audio-codec = <&codec>;
+ audio-asrc = <&asrc>;
+ hp-det-gpio = <&gpio5 4 0>;
+ audio-routing =
"Headphone Jack", "HP_L",
"Headphone Jack", "HP_R",
- "Speaker", "SPK_LP",
- "Speaker", "SPK_LN",
- "Speaker", "SPK_RP",
- "Speaker", "SPK_RN",
- "LINPUT1", "Mic Jack",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT2", "Mic Jack",
"LINPUT3", "Mic Jack",
- "RINPUT1", "Mic Jack",
- "RINPUT2", "Mic Jack";
-
- simple-audio-card,cpu {
- sound-dai = <&sai2>;
- };
-
- dailink_master: simple-audio-card,codec {
- sound-dai = <&codec>;
- clocks = <&clks IMX6UL_CLK_SAI2>;
- };
+ "RINPUT1", "AMIC",
+ "RINPUT2", "AMIC",
+ "Mic Jack", "MICB",
+ "AMIC", "MICB";
};
spi4 {
@@ -145,6 +133,10 @@
compatible = "wlf,wm8960";
reg = <0x1a>;
wlf,shared-lrclk;
+ wlf,hp-cfg = <3 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ clock-names = "mclk";
};
camera@3c {
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index ac0751b..4a0d837 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -164,6 +164,13 @@
"LINPUT1", "AMIC",
"AMIC", "MICB";
};
+
+ sound-hdmi {
+ compatible = "fsl,imx-audio-sii902x";
+ model = "sii902x-audio";
+ audio-cpu = <&sai3>;
+ hdmi-out;
+ };
};
&adc1 {
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
index 8fcd958..5b8dcc1 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
@@ -90,20 +90,71 @@
timeout-ms = <5000>;
};
- /* The first 16MB region on the expansion bus */
- flash@50000000 {
- compatible = "intel,ixp4xx-flash", "cfi-flash";
- bank-width = <2>;
- /*
- * 8 MB of Flash in 0x20000 byte blocks
- * mapped in at 0x50000000
- */
- reg = <0x50000000 0x800000>;
+ gpio-beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
- partitions {
- compatible = "redboot-fis";
- /* Eraseblock at 0x7e0000 */
- fis-index-block = <0x3f>;
+ soc {
+ bus@50000000 {
+ /* The first 16MB region at CS0 on the expansion bus */
+ flash@0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 8 MB of Flash in 0x20000 byte blocks
+ * mapped in at CS0.
+ */
+ reg = <0x00000000 0x800000>;
+
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x7e0000 */
+ fis-index-block = <0x3f>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
+ * We have slots (IDSEL) 1, 2 and 3.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 11 3>, /* INT C on slot 2 is irq 11 */
+ <0x1000 0 0 4 &gpio0 8 3>, /* INT D on slot 2 is irq 8 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
+ <0x1800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
+ <0x1800 0 0 4 &gpio0 8 3>; /* INT D on slot 3 is irq 8 */
+ };
+
+ ethernet@c8009000 {
+ status = "ok";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
new file mode 100644
index 0000000..8415850
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+
+/ {
+ model = "Welltech EPBX100";
+ compatible = "welltech,epbx100", "intel,ixp42x";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ /* 64 MB SDRAM */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 root=/dev/ram0 initrd=0x00800000,9M";
+ stdout-path = "uart0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ flash@50000000 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 16 MB of Flash
+ */
+ reg = <0x50000000 0x1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "zImage";
+ reg = <0x00080000 0x00100000>;
+ read-only;
+ };
+ partition@180000 {
+ label = "ramdisk";
+ reg = <0x00180000 0x00300000>;
+ read-only;
+ };
+ partition@480000 {
+ label = "User";
+ reg = <0x00480000 0x00b60000>;
+ read-only;
+ };
+ partition@fe0000 {
+ label = "FIS directory";
+ reg = <0x00fe0000 0x001f000>;
+ read-only;
+ };
+ partition@fff000 {
+ label = "RedBoot config";
+ reg = <0x00fff000 0x0001000>;
+ read-only;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
index a9622ca..5fa063e 100644
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp42x.dtsi
@@ -7,6 +7,10 @@
/ {
soc {
+ pci@c0000000 {
+ compatible = "intel,ixp42x-pci";
+ };
+
interrupt-controller@c8003000 {
compatible = "intel,ixp42x-interrupt";
};
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
index ba1163a..60a1228 100644
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
@@ -76,19 +76,97 @@
};
};
- flash@50000000 {
- compatible = "intel,ixp4xx-flash", "cfi-flash";
- bank-width = <2>;
- /*
- * 32 MB of Flash in 0x20000 byte blocks
- * mapped in at 0x50000000
- */
- reg = <0x50000000 0x2000000>;
+ soc {
+ bus@50000000 {
+ flash@0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 32 MB of Flash in 0x20000 byte blocks
+ * mapped in at CS0.
+ */
+ reg = <0x00000000 0x2000000>;
- partitions {
- compatible = "redboot-fis";
- /* Eraseblock at 0x1fe0000 */
- fis-index-block = <0xff>;
+ partitions {
+ compatible = "redboot-fis";
+ /* Eraseblock at 0x1fe0000 */
+ fis-index-block = <0xff>;
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "ok";
+
+ /*
+ * In the boardfile for the Cambria from OpenWRT the interrupts
+ * are assigned one per IDSEL, so all 4 interrupts from IDSEL
+ * 1 are connected to IRQ 11, all 4 interrupts from IDSEL 2
+ * connected to IRQ 10 etc. I find this highly unlikely so I
+ * have instead assumed that they are rotated (swizzled) like
+ * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
+ */
+ interrupt-map =
+ /* IDSEL 1 */
+ <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
+ /* IDSEL 2 */
+ <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+ /* IDSEL 3 */
+ <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 3>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 3>, /* INT D on slot 3 is irq 10 */
+ /* IDSEL 4 */
+ <0x2000 0 0 1 &gpio0 8 3>, /* INT A on slot 3 is irq 8 */
+ <0x2000 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
+ <0x2000 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
+ <0x2000 0 0 4 &gpio0 9 3>, /* INT D on slot 3 is irq 9 */
+ /* IDSEL 6 */
+ <0x3000 0 0 1 &gpio0 10 3>, /* INT A on slot 3 is irq 10 */
+ <0x3000 0 0 2 &gpio0 9 3>, /* INT B on slot 3 is irq 9 */
+ <0x3000 0 0 3 &gpio0 8 3>, /* INT C on slot 3 is irq 8 */
+ <0x3000 0 0 4 &gpio0 11 3>, /* INT D on slot 3 is irq 11 */
+ /* IDSEL 15 */
+ <0x7800 0 0 1 &gpio0 8 3>, /* INT A on slot 3 is irq 8 */
+ <0x7800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */
+ <0x7800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */
+ <0x7800 0 0 4 &gpio0 9 3>; /* INT D on slot 3 is irq 9 */
+ };
+
+ ethernet@c800a000 {
+ status = "ok";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ ethernet@c800c000 {
+ status = "ok";
+ queue-rx = <&qmgr 2>;
+ queue-txready = <&qmgr 19>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy2>;
+ intel,npe-handle = <&npe 0>;
};
};
};
diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi
index 494fb2f..1d0817c 100644
--- a/arch/arm/boot/dts/intel-ixp43x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp43x.dtsi
@@ -8,6 +8,10 @@
/ {
soc {
+ pci@c0000000 {
+ compatible = "intel,ixp43x-pci";
+ };
+
interrupt-controller@c8003000 {
compatible = "intel,ixp43x-interrupt";
};
diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
index f8cd506..cce49e8 100644
--- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
@@ -30,5 +30,38 @@
interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ /* This is known as EthB1 */
+ ethernet@c800d000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800d000 0x1000>;
+ status = "disabled";
+ intel,npe = <1>;
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
+ };
+
+ /* This is known as EthB2 */
+ ethernet@c800e000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800e000 0x1000>;
+ status = "disabled";
+ intel,npe = <2>;
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
+ };
+
+ /* This is known as EthB3 */
+ ethernet@c800f000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800f000 0x1000>;
+ status = "disabled";
+ intel,npe = <3>;
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi
index d4a0958..a50427a 100644
--- a/arch/arm/boot/dts/intel-ixp4xx.dtsi
+++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi
@@ -14,12 +14,61 @@
compatible = "simple-bus";
interrupt-parent = <&intcon>;
+ /*
+ * The IXP4xx expansion bus is a set of 16 or 32MB
+ * windows in the 256MB space from 0x50000000 to
+ * 0x5fffffff.
+ */
+ bus@50000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x50000000 0x10000000>;
+ dma-ranges = <0x00000000 0x50000000 0x10000000>;
+ };
+
qmgr: queue-manager@60000000 {
compatible = "intel,ixp4xx-ahb-queue-manager";
reg = <0x60000000 0x4000>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
};
+ pci@c0000000 {
+ /* compatible filled in by per-soc device tree */
+ reg = <0xc0000000 0x1000>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ status = "disabled";
+
+ ranges =
+ /*
+ * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff
+ * done in 4 chunks of 16MB each.
+ */
+ <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+ /* 64KB I/O space at 0x4c000000 */
+ <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+
+ /*
+ * This needs to map to the start of physical memory so
+ * PCI devices can see all (hopefully) memory. This is done
+ * using 4 1:1 16MB windows, so the RAM should not be more than
+ * 64 MB for this to work. If your memory is anywhere else
+ * than at 0x0 you need to alter this.
+ */
+ dma-ranges =
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ /* Each unique DTS using PCI must specify the swizzling */
+ };
+
uart0: serial@c8000000 {
compatible = "intel,xscale-uart";
reg = <0xc8000000 0x1000>;
@@ -61,9 +110,50 @@
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
};
- npe@c8006000 {
+ npe: npe@c8006000 {
compatible = "intel,ixp4xx-network-processing-engine";
reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+
+ /* NPE-C contains a crypto accelerator */
+ crypto {
+ compatible = "intel,ixp4xx-crypto";
+ intel,npe-handle = <&npe 2>;
+ queue-rx = <&qmgr 30>;
+ queue-txready = <&qmgr 29>;
+ };
+ };
+
+ /* This is known as EthB */
+ ethernet@c8009000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc8009000 0x1000>;
+ status = "disabled";
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ intel,npe-handle = <&npe 1>;
+ };
+
+ /* This is known as EthC */
+ ethernet@c800a000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800a000 0x1000>;
+ status = "disabled";
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
+ intel,npe-handle = <&npe 2>;
+ };
+
+ /* This is known as EthA */
+ ethernet@c800c000 {
+ compatible = "intel,ixp4xx-ethernet";
+ reg = <0xc800c000 0x1000>;
+ status = "disabled";
+ intel,npe = <0>;
+ /* Dummy values that depend on firmware */
+ queue-rx = <&qmgr 0>;
+ queue-txready = <&qmgr 0>;
};
};
};
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 14e26a4..d800f26 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -544,20 +544,15 @@
};
};
-&k2g_clks {
- /* on the board 22.5792MHz is connected to AUDOSC_IN */
- assigned-clocks = <&k2g_clks 0x4c 2>;
- assigned-clock-rates = <22579200>;
-};
-
&mcasp2 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcasp2_pins>;
- assigned-clocks = <&k2g_clks 0x6 1>;
- assigned-clock-parents = <&k2g_clks 0x6 2>;
+ assigned-clocks = <&k2g_clks 0x4c 2>, <&k2g_clks 0x6 1>;
+ assigned-clock-parents = <0>, <&k2g_clks 0x6 2>;
+ assigned-clock-rates = <22579200>, <0>;
status = "okay";
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 05a7501..3719829 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -242,7 +242,7 @@
status = "disabled";
};
- msgmgr: msgmgr@2a00000 {
+ msgmgr: mailbox@2a00000 {
compatible = "ti,k2g-message-manager";
#mbox-cells = <2>;
reg-names = "queue_proxy_region",
@@ -254,7 +254,7 @@
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
};
- pmmc: pmmc@2921c00 {
+ pmmc: system-controller@2921c00 {
compatible = "ti,k2g-sci";
/*
* In case of rare platforms that does not use k2g as
@@ -272,7 +272,7 @@
#power-domain-cells = <1>;
};
- k2g_clks: clocks {
+ k2g_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 8bae6ed..bd0e864 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -50,6 +50,7 @@
compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
reg = <0x84c0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ fifo-size = <128>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index 075d583..2273295 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -60,6 +60,14 @@
clock-frequency = <32768>;
status = "disabled";
};
+
+ xtal_div2: xtal_div2 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&xtal>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
};
soc: soc {
@@ -101,6 +109,12 @@
mask = <0x79>;
};
+ watchdog@6000 {
+ compatible = "mstar,msc313e-wdt";
+ reg = <0x6000 0x1f>;
+ clocks = <&xtal_div2>;
+ };
+
intc_fiq: interrupt-controller@201310 {
compatible = "mstar,mst-intc";
reg = <0x201310 0x40>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f9c2a99..5750ca1 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -120,8 +120,6 @@
#address-cells = <1>;
#size-cells = <0>;
interrupts = <56>;
- dmas = <&sdma 27 &sdma 28>;
- dma-names = "tx", "rx";
};
i2c2: i2c@48072000 {
@@ -131,8 +129,6 @@
#address-cells = <1>;
#size-cells = <0>;
interrupts = <57>;
- dmas = <&sdma 29 &sdma 30>;
- dma-names = "tx", "rx";
};
mcspi1: spi@48098000 {
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 494bf69..bb529a2 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -192,16 +192,15 @@
compatible = "ti,omap2-mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>, <34>;
- interrupt-names = "dsp", "iva";
ti,hwmods = "mailbox";
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <6>;
- mbox_dsp: dsp {
+ mbox_dsp: mbox-dsp {
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <1 0 0>;
};
- mbox_iva: iva {
+ mbox_iva: mbox-iva {
ti,mbox-tx = <2 1 3>;
ti,mbox-rx = <3 1 3>;
};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index d19d8ba..23115ba 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -284,7 +284,7 @@
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <6>;
- mbox_dsp: dsp {
+ mbox_dsp: mbox-dsp {
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <1 0 0>;
};
diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
index b4109f4..e6ba30a 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -195,7 +195,7 @@
* for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
*/
&gpio2 {
- en_usb2_port {
+ en-usb2-port-hog {
gpio-hog;
gpios = <29 GPIO_ACTIVE_HIGH>; /* gpio_61 */
output-low;
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index fd84bbf..9ce8d812 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -37,7 +37,7 @@
};
&gpio5 {
- irda_en {
+ irda-en-hog {
gpio-hog;
gpios = <(175-160) GPIO_ACTIVE_HIGH>;
output-high; /* activate gpio_175 to disable IrDA receiver */
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index c5b9da0..64b7e6f 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -403,8 +403,6 @@
compatible = "ti,omap3-i2c";
reg = <0x48070000 0x80>;
interrupts = <56>;
- dmas = <&sdma 27 &sdma 28>;
- dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
@@ -414,8 +412,6 @@
compatible = "ti,omap3-i2c";
reg = <0x48072000 0x80>;
interrupts = <57>;
- dmas = <&sdma 29 &sdma 30>;
- dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
@@ -425,8 +421,6 @@
compatible = "ti,omap3-i2c";
reg = <0x48060000 0x80>;
interrupts = <61>;
- dmas = <&sdma 25 &sdma 26>;
- dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
@@ -440,7 +434,7 @@
#mbox-cells = <1>;
ti,mbox-num-users = <2>;
ti,mbox-num-fifos = <2>;
- mbox_dsp: dsp {
+ mbox_dsp: mbox-dsp {
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <1 0 0>;
};
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index 9972167..46b8f9e 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -600,11 +600,11 @@
#mbox-cells = <1>;
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
- mbox_ipu: mbox_ipu {
+ mbox_ipu: mbox-ipu {
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <1 0 0>;
};
- mbox_dsp: mbox_dsp {
+ mbox_dsp: mbox-dsp {
ti,mbox-tx = <3 0 0>;
ti,mbox-rx = <2 0 0>;
};
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index d8f1362..45435bb 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -149,7 +149,7 @@
&gpio8 {
/* TI trees use GPIO instead of msecure, see also muxing */
- p234 {
+ msecure-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index b148b28..06cc3a1 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -616,11 +616,11 @@
#mbox-cells = <1>;
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
- mbox_ipu: mbox_ipu {
+ mbox_ipu: mbox-ipu {
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <1 0 0>;
};
- mbox_dsp: mbox_dsp {
+ mbox_dsp: mbox-dsp {
ti,mbox-tx = <3 0 0>;
ti,mbox-rx = <2 0 0>;
};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
index 91163867..31f59de 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
@@ -9,27 +9,27 @@
#size-cells = <1>;
u-boot@0 {
- reg = <0x0 0x60000>; // 384KB
+ reg = <0x0 0xe0000>; // 896KB
label = "u-boot";
};
- u-boot-env@60000 {
- reg = <0x60000 0x20000>; // 128KB
+ u-boot-env@e0000 {
+ reg = <0xe0000 0x20000>; // 128KB
label = "u-boot-env";
};
- kernel@80000 {
- reg = <0x80000 0x500000>; // 5MB
+ kernel@100000 {
+ reg = <0x100000 0x900000>; // 9MB
label = "kernel";
};
- rofs@580000 {
- reg = <0x580000 0x2a80000>; // 42.5MB
+ rofs@a00000 {
+ reg = <0xa00000 0x2000000>; // 32MB
label = "rofs";
};
- rwfs@3000000 {
- reg = <0x3000000 0x1000000>; // 16MB
+ rwfs@6000000 {
+ reg = <0x2a00000 0x1600000>; // 22MB
label = "rwfs";
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 282b89c..f7ea2e5 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -216,6 +216,10 @@
};
};
+&adm_dma {
+ status = "okay";
+};
+
&gmac0 {
status = "okay";
@@ -251,6 +255,39 @@
status = "okay";
};
+&hs_phy_1 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ nandcs@0 {
+ compatible = "qcom,nandcs";
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "RouterBoard NAND 1 Boot";
+ reg = <0x0000000 0x0800000>;
+ };
+
+ main@800000 {
+ label = "RouterBoard NAND 1 Main";
+ reg = <0x0800000 0x7800000>;
+ };
+ };
+ };
+};
+
&qcom_pinmux {
buttons_pins: buttons_pins {
mux {
@@ -305,4 +342,25 @@
input-disable;
};
};
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio4";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&ss_phy_1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 98995ea..7bcf5ef 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -2,6 +2,8 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
#include <dt-bindings/gpio/gpio.h>
@@ -46,6 +48,228 @@
};
};
+ thermal-zones {
+ tsens_tz_sensor0 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor1 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor2 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor3 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor4 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor5 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor6 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor7 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor8 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor9 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ tsens_tz_sensor10 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 10>;
+
+ trips {
+ cpu-critical {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ cpu-hot {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
+
memory {
device_type = "memory";
reg = <0x0 0x0>;
@@ -185,6 +409,31 @@
bias-pull-up;
};
};
+
+ nand_pins: nand_pins {
+ mux {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ pullups {
+ pins = "gpio39";
+ bias-pull-up;
+ };
+
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ bias-bus-hold;
+ };
+ };
};
intc: interrupt-controller@2000000 {
@@ -226,6 +475,26 @@
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
};
+ adm_dma: dma-controller@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
+
+ status = "disabled";
+ };
+
saw0: regulator@2089000 {
compatible = "qcom,saw2";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
@@ -403,6 +672,28 @@
status = "disabled";
};
+ nand: nand-controller@1ac00000 {
+ compatible = "qcom,ipq806x-nand";
+ reg = <0x1ac00000 0x800>;
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
sata: sata@29000000 {
compatible = "qcom,ipq806x-ahci", "generic-ahci";
reg = <0x29000000 0x180>;
@@ -436,6 +727,12 @@
reg = <0x00700000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ tsens_calib: calib@400 {
+ reg = <0x400 0xb>;
+ };
+ tsens_calib_backup: calib_backup@410 {
+ reg = <0x410 0xb>;
+ };
};
gcc: clock-controller@900000 {
@@ -443,6 +740,38 @@
reg = <0x00900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ tsens: thermal-sensor@900000 {
+ compatible = "qcom,ipq8064-tsens";
+
+ nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <11>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ rpm: rpm@108000 {
+ compatible = "qcom,rpm-ipq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+ clock-names = "ram";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
};
tcsr: syscon@1a400000 {
@@ -450,6 +779,14 @@
reg = <0x1a400000 0x100>;
};
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu_l2_aux";
+ };
+
lcc: clock-controller@28000000 {
compatible = "qcom,lcc-ipq8064";
reg = <0x28000000 0x1000>;
@@ -718,6 +1055,94 @@
status = "disabled";
};
+ hs_phy_0: phy@100f8800 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x100f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ss_phy_0: phy@100f8830 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x100f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb3_0: usb3@100f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x100f8800 0x8000>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_0_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_0: dwc3@10000000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000000 0xcd00>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_0>, <&ss_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ hs_phy_1: phy@110f8800 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x110f8800 0x30>;
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_1: phy@110f8830 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x110f8830 0x30>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ usb3_1: usb3@110f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x110f8800 0x8000>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_1_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_1: dwc3@11000000 {
+ compatible = "snps,dwc3";
+ reg = <0x11000000 0xcd00>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_1>, <&ss_phy_1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
index ddcd53a..2ffcd08 100644
--- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
@@ -250,7 +250,7 @@
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
/* efs2 partition is secured */
- secure-regions = <0x500000 0xb00000>;
+ secure-regions = /bits/ 64 <0x500000 0xb00000>;
};
};
diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index 3065f84..80c40da 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -250,8 +250,8 @@
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
/* ico and efs2 partitions are secured */
- secure-regions = <0x500000 0x500000
- 0xa00000 0xb00000>;
+ secure-regions = /bits/ 64 <0x500000 0x500000
+ 0xa00000 0xb00000>;
};
};
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index dd1b976..a227968 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -47,7 +47,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -56,6 +55,7 @@
clock-frequency = <1400000000>;
clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
power-domains = <&sysc R8A7742_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -77,6 +77,7 @@
clock-frequency = <1400000000>;
clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
power-domains = <&sysc R8A7742_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -98,6 +99,7 @@
clock-frequency = <1400000000>;
clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
power-domains = <&sysc R8A7742_PD_CA15_CPU2>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -119,6 +121,7 @@
clock-frequency = <1400000000>;
clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
power-domains = <&sysc R8A7742_PD_CA15_CPU3>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -750,6 +753,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 6e37b8d..7e5e09d 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -49,7 +49,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -59,6 +58,7 @@
clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
@@ -78,6 +78,7 @@
clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
@@ -702,6 +703,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index ace2086..8419683 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -49,7 +49,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -59,6 +58,7 @@
clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7744_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
@@ -78,6 +78,7 @@
clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7744_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
@@ -702,6 +703,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index be33bda..f877c51 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -64,7 +64,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -73,6 +72,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
power-domains = <&sysc R8A7745_PD_CA7_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
};
@@ -83,6 +83,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
power-domains = <&sysc R8A7745_PD_CA7_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
};
@@ -645,6 +646,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index a1d7f6e..13ef1e9 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -25,7 +25,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -34,6 +33,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
power-domains = <&sysc R8A77470_PD_CA7_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
};
@@ -44,6 +44,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
power-domains = <&sysc R8A77470_PD_CA7_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
};
@@ -537,6 +538,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index c9f87358..95efbaf 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -166,6 +166,7 @@
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <5>;
status = "disabled";
};
@@ -177,6 +178,7 @@
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <5>;
status = "disabled";
};
@@ -188,6 +190,7 @@
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <5>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index d2240b8..4658453 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -145,7 +145,7 @@
status = "okay";
clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
- clock-names = "du", "dclkin.0";
+ clock-names = "du.0", "dclkin.0";
ports {
port@0 {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 74d7e90..39fc58f 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -198,6 +198,7 @@
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <5>;
status = "disabled";
};
@@ -209,6 +210,7 @@
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <5>;
status = "disabled";
};
@@ -220,6 +222,7 @@
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <5>;
status = "disabled";
};
@@ -463,6 +466,7 @@
reg = <0xfff80000 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_DU>;
+ clock-names = "du.0";
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 2dad074..fa6d986 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -81,6 +81,9 @@
keyboard {
compatible = "gpio-keys";
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
one {
linux,code = <KEY_1>;
label = "SW2-1";
@@ -659,6 +662,11 @@
groups = "audio_clk_a";
function = "audio_clk";
};
+
+ keyboard_pins: keyboard {
+ pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28";
+ bias-pull-up;
+ };
};
ðer {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index de29394..ed6dd4f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -69,7 +69,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -78,6 +77,7 @@
clock-frequency = <1300000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -99,6 +99,7 @@
clock-frequency = <1300000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -120,6 +121,7 @@
clock-frequency = <1300000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -141,6 +143,7 @@
clock-frequency = <1300000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
voltage-tolerance = <1>; /* 1% */
@@ -162,6 +165,7 @@
clock-frequency = <780000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
capacity-dmips-mhz = <539>;
};
@@ -173,6 +177,7 @@
clock-frequency = <780000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
capacity-dmips-mhz = <539>;
};
@@ -184,6 +189,7 @@
clock-frequency = <780000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
capacity-dmips-mhz = <539>;
};
@@ -195,6 +201,7 @@
clock-frequency = <780000000>;
clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
capacity-dmips-mhz = <539>;
};
@@ -768,6 +775,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 61e881b..2a8b6fd 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -81,7 +81,7 @@
keyboard {
compatible = "gpio-keys";
- pinctrl-0 = <&sw2_pins>;
+ pinctrl-0 = <&keyboard_pins>;
pinctrl-names = "default";
key-1 {
@@ -622,7 +622,7 @@
function = "audio_clk";
};
- sw2_pins: sw2 {
+ keyboard_pins: keyboard {
pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
bias-pull-up;
};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 9d8320f..0ccc162 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -68,7 +68,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -77,6 +76,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -97,6 +97,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -728,6 +729,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index c100ae9..62aa9f6 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -112,6 +112,9 @@
keyboard {
compatible = "gpio-keys";
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
key-1 {
linux,code = <KEY_1>;
label = "SW2-1";
@@ -235,6 +238,11 @@
function = "du1";
};
+ keyboard_pins: keyboard {
+ pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02";
+ bias-pull-up;
+ };
+
pmic_irq_pins: pmicirq {
groups = "intc_irq2";
function = "intc";
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 253e8bf..9cdb738 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -45,7 +45,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -54,6 +53,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
};
@@ -64,6 +64,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA15>;
};
@@ -537,6 +538,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 87fa57a..479e0fd 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -64,9 +64,12 @@
reg = <0 0x40000000 0 0x40000000>;
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
key-1 {
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
@@ -567,6 +570,11 @@
function = "audio_clk";
};
+ keyboard_pins: keyboard {
+ pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
+ bias-pull-up;
+ };
+
vin0_pins: vin0 {
groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
function = "vin0";
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 6d74475..dea4b1e 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -60,7 +60,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -69,6 +68,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
+ enable-method = "renesas,apmu";
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
@@ -89,6 +89,7 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+ enable-method = "renesas,apmu";
voltage-tolerance = <1>; /* 1% */
clock-latency = <300000>; /* 300 us */
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index f9dba56..f330d79 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a7794.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Alt";
@@ -94,6 +95,42 @@
#size-cells = <1>;
};
+ keyboard {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
+ one {
+ linux,code = <KEY_1>;
+ label = "SW2-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ };
+ two {
+ linux,code = <KEY_2>;
+ label = "SW2-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+ };
+ three {
+ linux,code = <KEY_3>;
+ label = "SW2-3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ };
+ four {
+ linux,code = <KEY_4>;
+ label = "SW2-4";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
vga-encoder {
compatible = "adi,adv7123";
@@ -319,6 +356,11 @@
groups = "usb1";
function = "usb1";
};
+
+ keyboard_pins: keyboard {
+ pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
+ bias-pull-up;
+ };
};
&cmt0 {
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index eb89a27a..cafa304 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -45,9 +45,12 @@
reg = <0 0x40000000 0 0x40000000>;
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
+ pinctrl-0 = <&keyboard_pins>;
+ pinctrl-names = "default";
+
key-3 {
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
@@ -358,6 +361,11 @@
function = "du1";
};
+ keyboard_pins: keyboard {
+ pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
+ bias-pull-up;
+ };
+
ssi_pins: sound {
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
function = "ssi";
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 330dc51..eac9ed8 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -62,7 +62,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@@ -71,6 +70,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
};
@@ -81,6 +81,7 @@
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
+ enable-method = "renesas,apmu";
next-level-cache = <&L2_CA7>;
};
@@ -598,6 +599,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 7154b82..e817eba 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -390,7 +390,7 @@
};
};
- sleep {
+ suspend {
global_pwroff: global-pwroff {
rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index e24230d5..ffa9bc7 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3036-cru.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/power/rk3036-power.h>
/ {
#address-cells = <1>;
@@ -111,10 +112,32 @@
assigned-clock-rates = <100000000>;
clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
clock-names = "bus", "core";
+ power-domains = <&power RK3036_PD_GPU>;
resets = <&cru SRST_GPU>;
status = "disabled";
};
+ vpu: video-codec@10108000 {
+ compatible = "rockchip,rk3036-vpu";
+ reg = <0x10108000 0x800>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vdpu";
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vpu_mmu>;
+ power-domains = <&power RK3036_PD_VPU>;
+ };
+
+ vpu_mmu: iommu@10108800 {
+ compatible = "rockchip,iommu";
+ reg = <0x10108800 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+ clock-names = "aclk", "iface";
+ power-domains = <&power RK3036_PD_VPU>;
+ #iommu-cells = <0>;
+ };
+
vop: vop@10118000 {
compatible = "rockchip,rk3036-vop";
reg = <0x10118000 0x19c>;
@@ -124,6 +147,7 @@
resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vop_mmu>;
+ power-domains = <&power RK3036_PD_VIO>;
status = "disabled";
vop_out: port {
@@ -140,13 +164,28 @@
compatible = "rockchip,iommu";
reg = <0x10118300 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vop_mmu";
clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>;
clock-names = "aclk", "iface";
+ power-domains = <&power RK3036_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
+ qos_gpu: qos@1012d000 {
+ compatible = "rockchip,rk3036-qos", "syscon";
+ reg = <0x1012d000 0x20>;
+ };
+
+ qos_vpu: qos@1012e000 {
+ compatible = "rockchip,rk3036-qos", "syscon";
+ reg = <0x1012e000 0x20>;
+ };
+
+ qos_vio: qos@1012f000 {
+ compatible = "rockchip,rk3036-qos", "syscon";
+ reg = <0x1012f000 0x20>;
+ };
+
gic: interrupt-controller@10139000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -302,6 +341,37 @@
compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
reg = <0x20008000 0x1000>;
+ power: power-controller {
+ compatible = "rockchip,rk3036-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3036_PD_VIO {
+ reg = <RK3036_PD_VIO>;
+ clocks = <&cru ACLK_LCDC>,
+ <&cru HCLK_LCDC>,
+ <&cru SCLK_LCDC>;
+ pm_qos = <&qos_vio>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3036_PD_VPU {
+ reg = <RK3036_PD_VPU>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ pm_qos = <&qos_vpu>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3036_PD_GPU {
+ reg = <RK3036_PD_GPU>;
+ clocks = <&cru SCLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
+ };
+ };
+
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x1d8>;
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index eba7a13..390aa33 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -12,6 +12,11 @@
model = "bq Curie 2";
compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ };
+
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index 6b12165..a66d915 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -10,6 +10,10 @@
model = "MarsBoard RK3066";
compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
+ aliases {
+ mmc0 = &mmc0;
+ };
+
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index eed9e60..9790bc6 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -10,6 +10,11 @@
model = "Rikomagic MK808";
compatible = "rikomagic,mk808", "rockchip,rk3066a";
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ };
+
chosen {
stdout-path = "serial2:115200n8";
};
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 3095184..12b2e59 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -11,6 +11,12 @@
model = "Rayeager PX2";
compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ mmc2 = &emmc;
+ };
+
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
@@ -58,7 +64,7 @@
};
/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
- vcc_stdby: 5v-stdby-regulator {
+ vcc_stdby: stdby-regulator {
compatible = "regulator-fixed";
regulator-name = "5v_stdby";
regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 252750c..f5a665b 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -217,7 +217,7 @@
<150000000>, <75000000>;
};
- timer@2000e000 {
+ timer2: timer@2000e000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2000e000 0x100>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -238,7 +238,7 @@
};
};
- timer@20038000 {
+ timer0: timer@20038000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x20038000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -246,7 +246,7 @@
clock-names = "timer", "pclk";
};
- timer@2003a000 {
+ timer1: timer@2003a000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2003a000 0x100>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -266,30 +266,6 @@
status = "disabled";
};
- usbphy: phy {
- compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- usbphy0: usb-phy@17c {
- #phy-cells = <0>;
- reg = <0x17c>;
- clocks = <&cru SCLK_OTGPHY0>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- };
-
- usbphy1: usb-phy@188 {
- #phy-cells = <0>;
- reg = <0x188>;
- clocks = <&cru SCLK_OTGPHY1>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- };
- };
-
pinctrl: pinctrl {
compatible = "rockchip,rk3066a-pinctrl";
rockchip,grf = <&grf>;
@@ -702,6 +678,34 @@
power-domains = <&power RK3066_PD_GPU>;
};
+&grf {
+ compatible = "rockchip,rk3066-grf", "syscon", "simple-mfd";
+
+ usbphy: usbphy {
+ compatible = "rockchip,rk3066a-usb-phy",
+ "rockchip,rk3288-usb-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usbphy0: usb-phy@17c {
+ reg = <0x17c>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
+ usbphy1: usb-phy@188 {
+ reg = <0x188>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
@@ -755,7 +759,7 @@
#address-cells = <1>;
#size-cells = <0>;
- pd_vio@RK3066_PD_VIO {
+ power-domain@RK3066_PD_VIO {
reg = <RK3066_PD_VIO>;
clocks = <&cru ACLK_LCDC0>,
<&cru ACLK_LCDC1>,
@@ -780,21 +784,24 @@
<&qos_cif1>,
<&qos_ipp>,
<&qos_rga>;
+ #power-domain-cells = <0>;
};
- pd_video@RK3066_PD_VIDEO {
+ power-domain@RK3066_PD_VIDEO {
reg = <RK3066_PD_VIDEO>;
clocks = <&cru ACLK_VDPU>,
<&cru ACLK_VEPU>,
<&cru HCLK_VDPU>,
<&cru HCLK_VEPU>;
pm_qos = <&qos_vpu>;
+ #power-domain-cells = <0>;
};
- pd_gpu@RK3066_PD_GPU {
+ power-domain@RK3066_PD_GPU {
reg = <RK3066_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
};
};
};
@@ -861,6 +868,10 @@
pinctrl-0 = <&uart3_xfer>;
};
+&vpu {
+ power-domains = <&power RK3066_PD_VIDEO>;
+};
+
&wdt {
compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
};
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 66a0ff1..85d3fce 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -13,6 +13,12 @@
model = "BQ Edison2 Quad-Core";
compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188";
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ mmc2 = &emmc;
+ };
+
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index c32e1d4..39c6042 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -11,6 +11,11 @@
model = "Rockchip PX3-EVB";
compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+ aliases {
+ mmc0 = &mmc0;
+ mmc1 = &emmc;
+ };
+
chosen {
stdout-path = "serial2:115200n8";
};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index b0fef82..36c0945 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -11,6 +11,10 @@
model = "Radxa Rock";
compatible = "radxa,rock", "rockchip,rk3188";
+ aliases {
+ mmc0 = &mmc0;
+ };
+
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 2298a8d..793a1b9 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -150,16 +150,16 @@
compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
reg = <0x2000e000 0x20>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
- clock-names = "timer", "pclk";
+ clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+ clock-names = "pclk", "timer";
};
timer6: timer@200380a0 {
compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
reg = <0x200380a0 0x20>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
- clock-names = "timer", "pclk";
+ clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+ clock-names = "pclk", "timer";
};
i2s0: i2s@1011a000 {
@@ -214,30 +214,6 @@
};
};
- usbphy: phy {
- compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- usbphy0: usb-phy@10c {
- #phy-cells = <0>;
- reg = <0x10c>;
- clocks = <&cru SCLK_OTGPHY0>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- };
-
- usbphy1: usb-phy@11c {
- #phy-cells = <0>;
- reg = <0x11c>;
- clocks = <&cru SCLK_OTGPHY1>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- };
- };
-
pinctrl: pinctrl {
compatible = "rockchip,rk3188-pinctrl";
rockchip,grf = <&grf>;
@@ -662,6 +638,34 @@
power-domains = <&power RK3188_PD_GPU>;
};
+&grf{
+ compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";
+
+ usbphy: usbphy {
+ compatible = "rockchip,rk3188-usb-phy",
+ "rockchip,rk3288-usb-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usbphy0: usb-phy@10c {
+ reg = <0x10c>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
+ usbphy1: usb-phy@11c {
+ reg = <0x11c>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+ };
+};
+
&i2c0 {
compatible = "rockchip,rk3188-i2c";
pinctrl-names = "default";
@@ -699,7 +703,7 @@
#address-cells = <1>;
#size-cells = <0>;
- pd_vio@RK3188_PD_VIO {
+ power-domain@RK3188_PD_VIO {
reg = <RK3188_PD_VIO>;
clocks = <&cru ACLK_LCDC0>,
<&cru ACLK_LCDC1>,
@@ -719,21 +723,24 @@
<&qos_cif0>,
<&qos_ipp>,
<&qos_rga>;
+ #power-domain-cells = <0>;
};
- pd_video@RK3188_PD_VIDEO {
+ power-domain@RK3188_PD_VIDEO {
reg = <RK3188_PD_VIDEO>;
clocks = <&cru ACLK_VDPU>,
<&cru ACLK_VEPU>,
<&cru HCLK_VDPU>,
<&cru HCLK_VEPU>;
pm_qos = <&qos_vpu>;
+ #power-domain-cells = <0>;
};
- pd_gpu@RK3188_PD_GPU {
+ power-domain@RK3188_PD_GPU {
reg = <RK3188_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
};
};
};
@@ -794,6 +801,11 @@
pinctrl-0 = <&uart3_xfer>;
};
+&vpu {
+ compatible = "rockchip,rk3188-vpu", "rockchip,rk3066-vpu";
+ power-domains = <&power RK3188_PD_VIDEO>;
+};
+
&wdt {
compatible = "rockchip,rk3188-wdt", "snps,dw-wdt";
};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 208f212..75af99c 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3228-cru.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/rk3228-power.h>
/ {
#address-cells = <1>;
@@ -190,7 +191,65 @@
status = "disabled";
};
- u2phy0: usb2-phy@760 {
+ power: power-controller {
+ compatible = "rockchip,rk3228-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3228_PD_VIO {
+ reg = <RK3228_PD_VIO>;
+ clocks = <&cru ACLK_HDCP>,
+ <&cru SCLK_HDCP>,
+ <&cru ACLK_IEP>,
+ <&cru HCLK_IEP>,
+ <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>,
+ <&cru SCLK_RGA>;
+ pm_qos = <&qos_hdcp>,
+ <&qos_iep>,
+ <&qos_rga_r>,
+ <&qos_rga_w>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3228_PD_VOP {
+ reg = <RK3228_PD_VOP>;
+ clocks =<&cru ACLK_VOP>,
+ <&cru DCLK_VOP>,
+ <&cru HCLK_VOP>;
+ pm_qos = <&qos_vop>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3228_PD_VPU {
+ reg = <RK3228_PD_VPU>;
+ clocks = <&cru ACLK_VPU>,
+ <&cru HCLK_VPU>;
+ pm_qos = <&qos_vpu>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3228_PD_RKVDEC {
+ reg = <RK3228_PD_RKVDEC>;
+ clocks = <&cru ACLK_RKVDEC>,
+ <&cru HCLK_RKVDEC>,
+ <&cru SCLK_VDEC_CABAC>,
+ <&cru SCLK_VDEC_CORE>;
+ pm_qos = <&qos_rkvdec_r>,
+ <&qos_rkvdec_w>;
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@RK3228_PD_GPU {
+ reg = <RK3228_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ u2phy0: usb2phy@760 {
compatible = "rockchip,rk3228-usb2phy";
reg = <0x0760 0x0c>;
clocks = <&cru SCLK_OTGPHY0>;
@@ -217,7 +276,7 @@
};
};
- u2phy1: usb2-phy@800 {
+ u2phy1: usb2phy@800 {
compatible = "rockchip,rk3228-usb2phy";
reg = <0x0800 0x0c>;
clocks = <&cru SCLK_OTGPHY1>;
@@ -379,7 +438,6 @@
reg = <0x110b0000 0x10>;
#pwm-cells = <3>;
clocks = <&cru PCLK_PWM>;
- clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
status = "disabled";
@@ -390,7 +448,6 @@
reg = <0x110b0010 0x10>;
#pwm-cells = <3>;
clocks = <&cru PCLK_PWM>;
- clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm1_pin>;
status = "disabled";
@@ -401,7 +458,6 @@
reg = <0x110b0020 0x10>;
#pwm-cells = <3>;
clocks = <&cru PCLK_PWM>;
- clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pin>;
status = "disabled";
@@ -412,7 +468,6 @@
reg = <0x110b0030 0x10>;
#pwm-cells = <2>;
clocks = <&cru PCLK_PWM>;
- clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pin>;
status = "disabled";
@@ -517,7 +572,7 @@
pinctrl-0 = <&otp_pin>;
pinctrl-1 = <&otp_out>;
pinctrl-2 = <&otp_pin>;
- #thermal-sensor-cells = <0>;
+ #thermal-sensor-cells = <1>;
rockchip,hw-tshut-temp = <95000>;
status = "disabled";
};
@@ -550,30 +605,54 @@
"ppmmu1";
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
clock-names = "bus", "core";
+ power-domains = <&power RK3228_PD_GPU>;
resets = <&cru SRST_GPU_A>;
status = "disabled";
};
+ vpu: video-codec@20020000 {
+ compatible = "rockchip,rk3228-vpu", "rockchip,rk3399-vpu";
+ reg = <0x20020000 0x800>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vepu", "vdpu";
+ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ clock-names = "aclk", "hclk";
+ iommus = <&vpu_mmu>;
+ power-domains = <&power RK3228_PD_VPU>;
+ };
+
vpu_mmu: iommu@20020800 {
compatible = "rockchip,iommu";
reg = <0x20020800 0x100>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vpu_mmu";
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
clock-names = "aclk", "iface";
- iommu-cells = <0>;
- status = "disabled";
+ power-domains = <&power RK3228_PD_VPU>;
+ #iommu-cells = <0>;
+ };
+
+ vdec: video-codec@20030000 {
+ compatible = "rockchip,rk3228-vdec", "rockchip,rk3399-vdec";
+ reg = <0x20030000 0x480>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
+ <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+ clock-names = "axi", "ahb", "cabac", "core";
+ assigned-clocks = <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+ assigned-clock-rates = <300000000>, <300000000>;
+ iommus = <&vdec_mmu>;
+ power-domains = <&power RK3228_PD_RKVDEC>;
};
vdec_mmu: iommu@20030480 {
compatible = "rockchip,iommu";
reg = <0x20030480 0x40>, <0x200304c0 0x40>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vdec_mmu";
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
clock-names = "aclk", "iface";
- iommu-cells = <0>;
- status = "disabled";
+ power-domains = <&power RK3228_PD_RKVDEC>;
+ #iommu-cells = <0>;
};
vop: vop@20050000 {
@@ -585,6 +664,7 @@
resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vop_mmu>;
+ power-domains = <&power RK3228_PD_VOP>;
status = "disabled";
vop_out: port {
@@ -602,9 +682,9 @@
compatible = "rockchip,iommu";
reg = <0x20053f00 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vop_mmu";
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
clock-names = "aclk", "iface";
+ power-domains = <&power RK3228_PD_VOP>;
#iommu-cells = <0>;
status = "disabled";
};
@@ -615,6 +695,7 @@
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
clock-names = "aclk", "hclk", "sclk";
+ power-domains = <&power RK3228_PD_VIO>;
resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
reset-names = "core", "axi", "ahb";
};
@@ -623,10 +704,10 @@
compatible = "rockchip,iommu";
reg = <0x20070800 0x100>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "iep_mmu";
clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
clock-names = "aclk", "iface";
- iommu-cells = <0>;
+ power-domains = <&power RK3228_PD_VIO>;
+ #iommu-cells = <0>;
status = "disabled";
};
@@ -800,6 +881,51 @@
status = "disabled";
};
+ qos_iep: qos@31030080 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31030080 0x20>;
+ };
+
+ qos_rga_w: qos@31030100 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31030100 0x20>;
+ };
+
+ qos_hdcp: qos@31030180 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31030180 0x20>;
+ };
+
+ qos_rga_r: qos@31030200 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31030200 0x20>;
+ };
+
+ qos_vpu: qos@31040000 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31040000 0x20>;
+ };
+
+ qos_gpu: qos@31050000 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31050000 0x20>;
+ };
+
+ qos_vop: qos@31060000 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31060000 0x20>;
+ };
+
+ qos_rkvdec_r: qos@31070000 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31070000 0x20>;
+ };
+
+ qos_rkvdec_w: qos@31070080 {
+ compatible = "rockchip,rk3228-qos", "syscon";
+ reg = <0x31070080 0x20>;
+ };
+
gic: interrupt-controller@32010000 {
compatible = "arm,gic-400";
interrupt-controller;
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 44bb5e6..76363b8 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -218,7 +218,7 @@
flash0-supply = <&vcc_flash>;
flash1-supply = <&vccio_pmu>;
gpio30-supply = <&vccio_pmu>;
- gpio1830 = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
lcdc-supply = <&vcc_io>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vcc_18>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index aa50f8e..b156a83 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -379,10 +379,10 @@
audio-supply = <&vcc_18>;
bb-supply = <&vcc_io>;
dvp-supply = <&vcc_io>;
- flash0-suuply = <&vcc_18>;
+ flash0-supply = <&vcc_18>;
flash1-supply = <&vcc_lan>;
gpio30-supply = <&vcc_io>;
- gpio1830 = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
lcdc-supply = <&vcc_io>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vcc_18>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 05557ad..9c5a779 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -196,8 +196,8 @@
compatible = "rockchip,rk3288-timer";
reg = <0x0 0xff810000 0x0 0x20>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&xin24m>, <&cru PCLK_TIMER>;
- clock-names = "timer", "pclk";
+ clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clock-names = "pclk", "timer";
};
display-subsystem {
@@ -765,7 +765,7 @@
* *_HDMI HDMI
* *_MIPI_* MIPI
*/
- pd_vio@RK3288_PD_VIO {
+ power-domain@RK3288_PD_VIO {
reg = <RK3288_PD_VIO>;
clocks = <&cru ACLK_IEP>,
<&cru ACLK_ISP>,
@@ -801,19 +801,21 @@
<&qos_vio2_rga_r>,
<&qos_vio2_rga_w>,
<&qos_vio1_isp_r>;
+ #power-domain-cells = <0>;
};
/*
* Note: The following 3 are HEVC(H.265) clocks,
* and on the ACLK_HEVC_NIU (NOC).
*/
- pd_hevc@RK3288_PD_HEVC {
+ power-domain@RK3288_PD_HEVC {
reg = <RK3288_PD_HEVC>;
clocks = <&cru ACLK_HEVC>,
<&cru SCLK_HEVC_CABAC>,
<&cru SCLK_HEVC_CORE>;
pm_qos = <&qos_hevc_r>,
<&qos_hevc_w>;
+ #power-domain-cells = <0>;
};
/*
@@ -821,22 +823,24 @@
* (video endecoder & decoder) clocks that on the
* ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
*/
- pd_video@RK3288_PD_VIDEO {
+ power-domain@RK3288_PD_VIDEO {
reg = <RK3288_PD_VIDEO>;
clocks = <&cru ACLK_VCODEC>,
<&cru HCLK_VCODEC>;
pm_qos = <&qos_video>;
+ #power-domain-cells = <0>;
};
/*
* Note: ACLK_GPU is the GPU clock,
* and on the ACLK_GPU_NIU (NOC).
*/
- pd_gpu@RK3288_PD_GPU {
+ power-domain@RK3288_PD_GPU {
reg = <RK3288_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu_r>,
<&qos_gpu_w>;
+ #power-domain-cells = <0>;
};
};
@@ -1582,7 +1586,7 @@
drive-strength = <12>;
};
- sleep {
+ suspend {
global_pwroff: global-pwroff {
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 755c946..616a828 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -21,9 +21,6 @@
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
- mshc0 = &emmc;
- mshc1 = &mmc0;
- mshc2 = &mmc1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -50,6 +47,18 @@
status = "disabled";
};
+ vpu: video-codec@10104000 {
+ compatible = "rockchip,rk3066-vpu";
+ reg = <0x10104000 0x800>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vepu", "vdpu";
+ clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>,
+ <&cru ACLK_VEPU>, <&cru HCLK_VEPU>;
+ clock-names = "aclk_vdpu", "hclk_vdpu",
+ "aclk_vepu", "hclk_vepu";
+ };
+
L2: cache-controller@10138000 {
compatible = "arm,pl310-cache";
reg = <0x10138000 0x1000>;
@@ -256,7 +265,7 @@
};
grf: grf@20008000 {
- compatible = "syscon";
+ compatible = "syscon", "simple-mfd";
reg = <0x20008000 0x200>;
};
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 884872c..9bd0acf 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -265,7 +265,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rv1108-usb2phy";
reg = <0x100 0x0c>;
clocks = <&cru SCLK_USBPHY>;
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index 5c1e12d..c6f3914 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -358,15 +358,6 @@
reg = <0x4a>;
interrupt-parent = <&gpj0>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-
- atmel,x-line = <17>;
- atmel,y-line = <11>;
- atmel,x-size = <800>;
- atmel,y-size = <480>;
- atmel,burst-length = <0x21>;
- atmel,threshold = <0x28>;
- atmel,orientation = <1>;
-
vdd-supply = <&tsp_reg>;
};
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index e47e1ca..f6e3e6f 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -794,7 +794,7 @@
0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */
0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */
0xffffffff 0x3ff83fff 0xff00ffff /* pioC */
- 0x0003ff00 0x8002a800 0x00000000 /* pioD */
+ 0xb003ff00 0x8002a800 0x00000000 /* pioD */
0xffffffff 0x7fffffff 0x76fff1bf /* pioE */
>;
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
index 3cc9a23..a61a078 100644
--- a/arch/arm/boot/dts/sd5203.dts
+++ b/arch/arm/boot/dts/sd5203.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2020 Hisilicon Limited.
+ * Copyright (c) 2020 HiSilicon Limited.
*
* DTS file for Hisilicon SD5203 Board
*/
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index a16a00f..d0fe3f9 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -34,7 +34,7 @@
#clock-cells = <1>;
};
- ab8500_gpio: ab8500-gpio {
+ ab8500_gpio: ab8500-gpiocontroller {
compatible = "stericsson,ab8500-gpio";
gpio-controller;
#gpio-cells = <2>;
@@ -42,15 +42,15 @@
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH
- 18 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+ <18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "60S", "ALARM";
};
gpadc: ab8500-gpadc {
compatible = "stericsson,ab8500-gpadc";
- interrupts = <32 IRQ_TYPE_LEVEL_HIGH
- 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+ <39 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "HW_CONV_END", "SW_CONV_END";
vddadc-supply = <&ab8500_ldo_tvout_reg>;
#address-cells = <1>;
@@ -219,13 +219,13 @@
ab8500_usb {
compatible = "stericsson,ab8500-usb";
- interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
- 96 IRQ_TYPE_LEVEL_HIGH
- 14 IRQ_TYPE_LEVEL_HIGH
- 15 IRQ_TYPE_LEVEL_HIGH
- 79 IRQ_TYPE_LEVEL_HIGH
- 74 IRQ_TYPE_LEVEL_HIGH
- 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+ <96 IRQ_TYPE_LEVEL_HIGH>,
+ <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>,
+ <74 IRQ_TYPE_LEVEL_HIGH>,
+ <75 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ID_WAKEUP_R",
"ID_WAKEUP_F",
"VBUS_DET_F",
@@ -242,8 +242,8 @@
ab8500-ponkey {
compatible = "stericsson,ab8500-poweron-key";
- interrupts = <6 IRQ_TYPE_LEVEL_HIGH
- 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
};
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index cc045b2..0defc15 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -31,7 +31,7 @@
#clock-cells = <1>;
};
- ab8505_gpio: ab8505-gpio {
+ ab8505_gpio: ab8505-gpiocontroller {
compatible = "stericsson,ab8505-gpio";
gpio-controller;
#gpio-cells = <2>;
@@ -39,8 +39,8 @@
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH
- 18 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+ <18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "60S", "ALARM";
};
@@ -182,13 +182,13 @@
ab8500_usb: ab8500_usb {
compatible = "stericsson,ab8500-usb";
- interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
- 96 IRQ_TYPE_LEVEL_HIGH
- 14 IRQ_TYPE_LEVEL_HIGH
- 15 IRQ_TYPE_LEVEL_HIGH
- 79 IRQ_TYPE_LEVEL_HIGH
- 74 IRQ_TYPE_LEVEL_HIGH
- 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+ <96 IRQ_TYPE_LEVEL_HIGH>,
+ <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>,
+ <74 IRQ_TYPE_LEVEL_HIGH>,
+ <75 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ID_WAKEUP_R",
"ID_WAKEUP_F",
"VBUS_DET_F",
@@ -205,8 +205,8 @@
ab8500-ponkey {
compatible = "stericsson,ab8500-poweron-key";
- interrupts = <6 IRQ_TYPE_LEVEL_HIGH
- 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
};
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 4946743..3ccb7b5 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@
soc {
prcmu@80157000 {
ab8500 {
- ab8500-gpio {
+ ab8500-gpiocontroller {
/* Hog a few default settings */
pinctrl-names = "default";
pinctrl-0 = <&gpio2_default_mode>,
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
index 8d59202..37e5940 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
@@ -104,6 +104,9 @@
* <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
* <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
*/
+ mount-matrix = "0", "1", "0",
+ "1", "0", "0",
+ "0", "0", "-1";
};
magnetometer@1e {
/* Magnetometer */
@@ -136,6 +139,9 @@
/* INT2 would need to be open drain */
interrupts = <18 IRQ_TYPE_EDGE_RISING>,
<19 IRQ_TYPE_EDGE_RISING>;
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
};
magnetometer@f {
/* Magnetometer */
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index 70f0583..00ce9d7 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -89,10 +89,12 @@
<19 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&accel_tvk_mode>;
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
};
magnetometer@1e {
compatible = "st,lsm303dlm-magn";
- st,drdy-int-pin = <1>;
reg = <0x1e>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 83b1796..c97e8d2 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
#include "ste-href-family-pinctrl.dtsi"
/ {
@@ -64,17 +65,20 @@
reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
linux,default-trigger = "heartbeat";
};
chan@1 {
reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
chan@2 {
reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
};
lp5521@34 {
@@ -88,16 +92,19 @@
reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
chan@1 {
reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
chan@2 {
reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
+ color = <LED_COLOR_ID_BLUE>;
};
};
bh1780@29 {
@@ -202,7 +209,7 @@
prcmu@80157000 {
ab8500 {
- ab8500-gpio {
+ ab8500-gpiocontroller {
};
ab8500_usb {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b344b37..40f1d7c 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,7 +376,7 @@
prcmu@80157000 {
ab8500 {
- ab8500-gpio {
+ ab8500-gpiocontroller {
/*
* AB8500 GPIOs are numbered starting from 1, so the first
* index 0 is what in the datasheet is called "GPIO1", and
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 0d43ee6..40df7c6 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -121,7 +121,7 @@
#size-cells = <0>;
wifi@1 {
- compatible = "brcm,bcm4329-fmac";
+ compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
reg = <1>;
/* GPIO216 (WLAN_HOST_WAKE) */
@@ -162,6 +162,7 @@
pinctrl-1 = <&u0_a_1_sleep>;
bluetooth {
+ /* BCM4334B0 actually */
compatible = "brcm,bcm4330-bt";
/* GPIO222 (BT_VREG_ON) */
shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index f243698..25af066 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -401,8 +401,7 @@
status = "okay";
wifi@1 {
- /* Actually BRCM4330 */
- compatible = "brcm,bcm4329-fmac";
+ compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
reg = <1>;
/* GPIO216 WL_HOST_WAKE */
interrupt-parent = <&gpio6>;
@@ -436,6 +435,7 @@
status = "okay";
bluetooth {
+ /* BCM4330B1 actually */
compatible = "brcm,bcm4330-bt";
/* GPIO222 rail BT_VREG_EN to BT_REG_ON */
shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
@@ -583,10 +583,9 @@
accelerometer@08 {
compatible = "bosch,bma222";
reg = <0x08>;
- /* FIXME: no idea about this */
- mount-matrix = "1", "0", "0",
- "0", "1", "0",
- "0", "0", "1";
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index d28a007..94afd7a 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -211,7 +211,7 @@
#size-cells = <0>;
wifi@1 {
- compatible = "brcm,bcm4329-fmac";
+ compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
reg = <1>;
/* GPIO216 WL_HOST_WAKE */
interrupt-parent = <&gpio6>;
@@ -247,6 +247,7 @@
/* FIXME: not quite working yet, probably needs regulators */
bluetooth {
+ /* BCM4334B0 actually */
compatible = "brcm,bcm4330-bt";
shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 7e10ae7..9ac1ffe 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -119,17 +119,15 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "Wake up";
linux,code = <KEY_WAKEUP>;
gpios = <&gpioa 0 0>;
};
- button@1 {
+ button-1 {
label = "Tamper";
linux,code = <KEY_RESTART>;
gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index ca8c192..327613f 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "Wake up";
linux,code = <KEY_WAKEUP>;
gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 4774163..155d9ff 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -45,7 +45,7 @@
/ {
soc {
- pinctrl: pin-controller {
+ pinctrl: pin-controller@40020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40020000 0x3000>;
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 3dc068b..075ac57 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -81,12 +81,10 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "User";
linux,code = <KEY_HOME>;
gpios = <&gpioa 0 0>;
diff --git a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
index 3e7a17d..e10d7a1 100644
--- a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
@@ -42,54 +42,50 @@
#include "stm32f4-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller {
- compatible = "st,stm32f429-pinctrl";
+&pinctrl {
+ compatible = "st,stm32f429-pinctrl";
- gpioa: gpio@40020000 {
- gpio-ranges = <&pinctrl 0 0 16>;
- };
+ gpioa: gpio@40020000 {
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
- gpiob: gpio@40020400 {
- gpio-ranges = <&pinctrl 0 16 16>;
- };
+ gpiob: gpio@40020400 {
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
- gpioc: gpio@40020800 {
- gpio-ranges = <&pinctrl 0 32 16>;
- };
+ gpioc: gpio@40020800 {
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
- gpiod: gpio@40020c00 {
- gpio-ranges = <&pinctrl 0 48 16>;
- };
+ gpiod: gpio@40020c00 {
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
- gpioe: gpio@40021000 {
- gpio-ranges = <&pinctrl 0 64 16>;
- };
+ gpioe: gpio@40021000 {
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
- gpiof: gpio@40021400 {
- gpio-ranges = <&pinctrl 0 80 16>;
- };
+ gpiof: gpio@40021400 {
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
- gpiog: gpio@40021800 {
- gpio-ranges = <&pinctrl 0 96 16>;
- };
+ gpiog: gpio@40021800 {
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
- gpioh: gpio@40021c00 {
- gpio-ranges = <&pinctrl 0 112 16>;
- };
+ gpioh: gpio@40021c00 {
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
- gpioi: gpio@40022000 {
- gpio-ranges = <&pinctrl 0 128 16>;
- };
+ gpioi: gpio@40022000 {
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
- gpioj: gpio@40022400 {
- gpio-ranges = <&pinctrl 0 144 16>;
- };
+ gpioj: gpio@40022400 {
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
- gpiok: gpio@40022800 {
- gpio-ranges = <&pinctrl 0 160 8>;
- };
- };
+ gpiok: gpio@40022800 {
+ gpio-ranges = <&pinctrl 0 160 8>;
};
};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index f6530d7..8748d58 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,8 +283,6 @@
};
timers13: timers@40001c00 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40001C00 0x400>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@
};
timers14: timers@40002000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40002000 0x400>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -633,8 +629,6 @@
};
timers10: timers@40014400 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014400 0x400>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -649,8 +643,6 @@
};
timers11: timers@40014800 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014800 0x400>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
@@ -709,7 +701,7 @@
status = "disabled";
};
- rcc: rcc@40023810 {
+ rcc: rcc@40023800 {
#reset-cells = <1>;
#clock-cells = <2>;
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 2e1b3bb..8c982ae 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -104,12 +104,10 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "User";
linux,code = <KEY_WAKEUP>;
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
index fff54266..6bf6026 100644
--- a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
@@ -42,55 +42,51 @@
#include "stm32f4-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller {
- compatible = "st,stm32f469-pinctrl";
+&pinctrl {
+ compatible = "st,stm32f469-pinctrl";
- gpioa: gpio@40020000 {
- gpio-ranges = <&pinctrl 0 0 16>;
- };
+ gpioa: gpio@40020000 {
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
- gpiob: gpio@40020400 {
- gpio-ranges = <&pinctrl 0 16 16>;
- };
+ gpiob: gpio@40020400 {
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
- gpioc: gpio@40020800 {
- gpio-ranges = <&pinctrl 0 32 16>;
- };
+ gpioc: gpio@40020800 {
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
- gpiod: gpio@40020c00 {
- gpio-ranges = <&pinctrl 0 48 16>;
- };
+ gpiod: gpio@40020c00 {
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
- gpioe: gpio@40021000 {
- gpio-ranges = <&pinctrl 0 64 16>;
- };
+ gpioe: gpio@40021000 {
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
- gpiof: gpio@40021400 {
- gpio-ranges = <&pinctrl 0 80 16>;
- };
+ gpiof: gpio@40021400 {
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
- gpiog: gpio@40021800 {
- gpio-ranges = <&pinctrl 0 96 16>;
- };
+ gpiog: gpio@40021800 {
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
- gpioh: gpio@40021c00 {
- gpio-ranges = <&pinctrl 0 112 16>;
- };
+ gpioh: gpio@40021c00 {
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
- gpioi: gpio@40022000 {
- gpio-ranges = <&pinctrl 0 128 16>;
- };
+ gpioi: gpio@40022000 {
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
- gpioj: gpio@40022400 {
- gpio-ranges = <&pinctrl 0 144 6>,
- <&pinctrl 12 156 4>;
- };
+ gpioj: gpio@40022400 {
+ gpio-ranges = <&pinctrl 0 144 6>,
+ <&pinctrl 12 156 4>;
+ };
- gpiok: gpio@40022800 {
- gpio-ranges = <&pinctrl 3 163 5>;
- };
- };
+ gpiok: gpio@40022800 {
+ gpio-ranges = <&pinctrl 3 163 5>;
};
};
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index fe4cfda..1cf8a23 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -9,7 +9,7 @@
/ {
soc {
- pinctrl: pin-controller {
+ pinctrl: pin-controller@40020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40020000 0x3000>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index e1df603..014b416 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -265,8 +265,6 @@
};
timers13: timers@40001c00 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40001C00 0x400>;
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@
};
timers14: timers@40002000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40002000 0x400>;
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -364,9 +360,9 @@
status = "disabled";
};
- i2c3: i2c@40005C00 {
+ i2c3: i2c@40005c00 {
compatible = "st,stm32f7-i2c";
- reg = <0x40005C00 0x400>;
+ reg = <0x40005c00 0x400>;
interrupts = <72>,
<73>;
resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
@@ -531,8 +527,6 @@
};
timers10: timers@40014400 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014400 0x400>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -547,8 +541,6 @@
};
timers11: timers@40014800 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014800 0x400>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 0ce7fbc..be943b7 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "User";
linux,code = <KEY_HOME>;
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 05ecdf9..6e42ca2 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -485,8 +485,6 @@
};
lptimer4: timer@58002c00 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58002c00 0x400>;
clocks = <&rcc LPTIM4_CK>;
@@ -501,8 +499,6 @@
};
lptimer5: timer@58003000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58003000 0x400>;
clocks = <&rcc LPTIM5_CK>;
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 060baa8..5b60ecb 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -118,6 +118,39 @@
};
};
+ dcmi_pins_b: dcmi-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, AF13)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('C', 6, AF13)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
+ <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */
+ <STM32_PINMUX('D', 3, AF13)>,/* DCMI_D5 */
+ <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */
+ <STM32_PINMUX('B', 9, AF13)>;/* DCMI_D7 */
+ bias-disable;
+ };
+ };
+
+ dcmi_sleep_pins_b: dcmi-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('C', 6, ANALOG)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
+ <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */
+ <STM32_PINMUX('D', 3, ANALOG)>,/* DCMI_D5 */
+ <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */
+ <STM32_PINMUX('B', 9, ANALOG)>;/* DCMI_D7 */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index fcd3230..bd289bf 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1369,8 +1369,8 @@
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
- <&mdma1 22 0x2 0x100008 0x0 0x0>;
+ dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+ <&mdma1 22 0x2 0x10100008 0x0 0x0>;
dma-names = "tx", "rx";
clocks = <&rcc QSPI_K>;
resets = <&rcc QSPI_R>;
@@ -1416,12 +1416,6 @@
status = "disabled";
};
- stmmac_axi_config_0: stmmac-axi-config {
- snps,wr_osr_lmt = <0x7>;
- snps,rd_osr_lmt = <0x7>;
- snps,blen = <0 0 0 0 16 8 4>;
- };
-
ethernet0: ethernet@5800a000 {
compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
reg = <0x5800a000 0x2000>;
@@ -1447,6 +1441,12 @@
snps,axi-config = <&stmmac_axi_config_0>;
snps,tso;
status = "disabled";
+
+ stmmac_axi_config_0: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
};
usbh_ohci: usb@5800c000 {
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 674b2d3..5670b23 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -89,7 +89,7 @@
};
&pinctrl {
- ltdc_pins: ltdc {
+ ltdc_pins: ltdc-0 {
pins {
pinmux = <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */
<STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index 113c48b..a4b14ef 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -184,8 +184,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -208,7 +206,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -219,13 +216,13 @@
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 6cf49a0..2d94610 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -173,8 +173,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -197,7 +195,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -213,7 +210,7 @@
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
@@ -269,7 +266,7 @@
st,neg-edge;
bus-width = <8>;
vmmc-supply = <&v3v3>;
- vqmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd>;
mmc-ddr-3_3v;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index a7ffec8..be1dd5e 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -64,7 +64,7 @@
pinctrl-0 = <&sdmmc1_b4_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
- cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
disable-wp;
st,neg-edge;
bus-width = <4>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 5523f41..c5ea08f 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -34,7 +34,6 @@
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #size-cells = <0>;
poll-interval = <20>;
/*
@@ -60,7 +59,6 @@
gpio-keys {
compatible = "gpio-keys";
- #size-cells = <0>;
button-1 {
label = "TA2-GPIO-B";
@@ -184,12 +182,11 @@
};
- polytouch@38 {
- compatible = "edt,edt-ft5x06";
+ touchscreen@38 {
+ compatible = "edt,edt-ft5406";
reg = <0x38>;
interrupt-parent = <&gpiog>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
- linux,wakeup;
};
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 272a1a6..2af0a67 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -123,7 +123,6 @@
max-speed = <100>;
phy-handle = <&phy0>;
st,eth-ref-clk-sel;
- phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
mdio0 {
#address-cells = <1>;
@@ -132,6 +131,13 @@
phy0: ethernet-phy@1 {
reg = <1>;
+ /* LAN8710Ai */
+ compatible = "ethernet-phy-id0007.c0f0",
+ "ethernet-phy-ieee802.3-c22";
+ clocks = <&rcc ETHCK_K>;
+ reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500>;
+ reset-deassert-us = <500>;
interrupt-parent = <&gpioi>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};
@@ -144,7 +150,7 @@
pinctrl-1 = <&fmc_sleep_pins_b>;
status = "okay";
- ksz8851: ks8851mll@1,0 {
+ ksz8851: ethernet@1,0 {
compatible = "micrel,ks8851-mll";
reg = <1 0x0 0x2>, <1 0x2 0x20000>;
interrupt-parent = <&gpioc>;
@@ -327,8 +333,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -350,7 +354,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -366,7 +369,7 @@
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
@@ -431,7 +434,7 @@
#size-cells = <0>;
status = "okay";
- flash0: mx66l51235l@0 {
+ flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 013ae36..2b0ac60 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -198,7 +198,7 @@
#size-cells = <0>;
status = "okay";
- flash0: spi-flash@0 {
+ flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 713485a..6706d83 100644
--- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -146,8 +146,6 @@
vdd_usb: ldo4 {
regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
interrupts = <IT_CURLIM_LDO4 0>;
};
@@ -171,7 +169,6 @@
vref_ddr: vref_ddr {
regulator-name = "vref_ddr";
regulator-always-on;
- regulator-over-current-protection;
};
bst_out: boost {
@@ -182,13 +179,13 @@
vbus_otg: pwr_sw1 {
regulator-name = "vbus_otg";
interrupts = <IT_OCP_OTG 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
vbus_sw: pwr_sw2 {
regulator-name = "vbus_sw";
interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
+ regulator-active-discharge = <1>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 7344c37..2beddbb 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -198,7 +198,7 @@
};
link_codec: simple-audio-card,codec {
- sound-dai = <&codec>;
+ sound-dai = <&codec 0>;
};
};
@@ -238,7 +238,7 @@
};
codec: codec@1c22e00 {
- #sound-dai-cells = <0>;
+ #sound-dai-cells = <1>;
compatible = "allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x400>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 97f4978..d05fa67 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
new file mode 100644
index 0000000..265e0fa
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+// Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include "sun8i-r40.dtsi"
+
+&i2c0 {
+ status = "okay";
+
+ axp22x: pmic@34 {
+ compatible = "x-powers,axp221";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp22x.dtsi"
+
+&mmc2 {
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_aldo2>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&pio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_out_a_pin>;
+ vcc-pa-supply = <®_dcdc1>;
+ vcc-pc-supply = <®_aldo2>;
+ vcc-pd-supply = <®_dcdc1>;
+ vcc-pf-supply = <®_dldo4>;
+ vcc-pg-supply = <®_dldo1>;
+};
+
+®_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pa";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+®_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+®_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+®_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vdd2v5-sata";
+};
+
+®_eldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd1v2-sata";
+};
+
+®_eldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-pe";
+};
diff --git a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
new file mode 100644
index 0000000..0bd1336
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+// Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun8i-r40-feta40i.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Forlinx OKA40i-C";
+ compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40";
+
+ aliases {
+ ethernet0 = &gmac;
+ serial0 = &uart0;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5; /* RS485 */
+ serial7 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-5 { /* this is how the leds are labeled on the board */
+ gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led-6 {
+ gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
+ clocks = <&ccu CLK_OUTA>;
+ clock-names = "ext_clock";
+ };
+};
+
+&ahci {
+ ahci-supply = <®_dldo4>;
+ phy-supply = <®_eldo2>;
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_rgmii_pins>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <®_dcdc1>;
+ status = "okay";
+};
+
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11
+ status = "okay";
+};
+
+&mmc3 {
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dcdc1>;
+ bus-width = <4>;
+ cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+®_dc1sw {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-lcd";
+};
+
+®_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&tcon_tv0 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pg_pins>;
+ status = "okay";
+};
+
+&uart5 { /* RS485 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_ph_pins>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pi_pins>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_vcc5v0>;
+ usb2_vbus-supply = <®_vcc5v0>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index d5ad3b9..291f478 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -357,6 +357,8 @@
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC3>;
reset-names = "ahb";
+ pinctrl-0 = <&mmc3_pins>;
+ pinctrl-names = "default";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
@@ -602,6 +604,15 @@
};
/omit-if-no-ref/
+ mmc3_pins: mmc3-pins {
+ pins = "PI4", "PI5", "PI6",
+ "PI7", "PI8", "PI9";
+ function = "mmc3";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ /omit-if-no-ref/
spi0_pc_pins: spi0-pc-pins {
pins = "PC0", "PC1", "PC2";
function = "spi0";
@@ -631,20 +642,65 @@
function = "spi1";
};
+ /omit-if-no-ref/
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
+ /omit-if-no-ref/
+ uart2_pi_pins: uart2-pi-pins {
+ pins = "PI18", "PI19";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
+ uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+ pins = "PI16", "PI17";
+ function = "uart2";
+ };
+
+ /omit-if-no-ref/
uart3_pg_pins: uart3-pg-pins {
pins = "PG6", "PG7";
function = "uart3";
};
+ /omit-if-no-ref/
uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
pins = "PG8", "PG9";
function = "uart3";
};
+
+ /omit-if-no-ref/
+ uart4_pg_pins: uart4-pg-pins {
+ pins = "PG10", "PG11";
+ function = "uart4";
+ };
+
+ /omit-if-no-ref/
+ uart5_ph_pins: uart5-ph-pins {
+ pins = "PH6", "PH7";
+ function = "uart5";
+ };
+
+ /omit-if-no-ref/
+ uart7_pi_pins: uart7-pi-pins {
+ pins = "PI20", "PI21";
+ function = "uart7";
+ };
+ };
+
+ timer@1c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
};
wdt: watchdog@1c20c90 {
diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi
index c279e135..186c30c 100644
--- a/arch/arm/boot/dts/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3.dtsi
@@ -1,14 +1,40 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
*/
#include "sun8i-v3s.dtsi"
+/ {
+ soc {
+ i2s0: i2s@1c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-v3-i2s",
+ "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins>;
+ resets = <&ccu RST_BUS_I2S0>;
+ status = "disabled";
+ };
+ };
+};
+
&ccu {
compatible = "allwinner,sun8i-v3-ccu";
};
+&codec_analog {
+ compatible = "allwinner,sun8i-v3-codec-analog",
+ "allwinner,sun8i-h3-codec-analog";
+};
+
&emac {
/delete-property/ phy-handle;
/delete-property/ phy-mode;
@@ -25,6 +51,11 @@
&pio {
compatible = "allwinner,sun8i-v3-pinctrl";
+ i2s0_pins: i2s0-pins {
+ pins = "PG10", "PG11", "PG12", "PG13";
+ function = "i2s";
+ };
+
uart1_pg_pins: uart1-pg-pins {
pins = "PG6", "PG7";
function = "uart1";
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
index db5cd0b..752ad05 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -49,16 +49,18 @@
compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
"allwinner,sun8i-v3s";
+ aliases {
+ ethernet0 = &emac;
+ };
+
leds {
/* The LEDs use PG0~2 pins, which conflict with MMC1 */
status = "disabled";
};
};
-&mmc1 {
- broken-cd;
- bus-width = <4>;
- vmmc-supply = <®_vcc3v3>;
+&emac {
+ allwinner,leds-active-low;
status = "okay";
};
@@ -94,3 +96,10 @@
voltage = <800000>;
};
};
+
+&mmc1 {
+ broken-cd;
+ bus-width = <4>;
+ vmmc-supply = <®_vcc3v3>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index eb4cb63..b30bc1a 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -172,6 +173,15 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun8i-v3s-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun8i-v3s-tcon";
reg = <0x01c0c000 0x1000>;
@@ -275,6 +285,8 @@
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
clock-names = "ahb", "mod";
+ dmas = <&dma 16>, <&dma 16>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_CE>;
reset-names = "ahb";
};
@@ -422,6 +434,15 @@
clocks = <&osc24M>;
};
+ pwm: pwm@1c21400 {
+ compatible = "allwinner,sun8i-v3s-pwm",
+ "allwinner,sun7i-a20-pwm";
+ reg = <0x01c21400 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x400>;
@@ -429,6 +450,25 @@
status = "disabled";
};
+ codec: codec@1c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-v3s-codec";
+ reg = <0x01c22c00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "apb", "codec";
+ resets = <&ccu RST_BUS_CODEC>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ allwinner,codec-analog-controls = <&codec_analog>;
+ status = "disabled";
+ };
+
+ codec_analog: codec-analog@1c23000 {
+ compatible = "allwinner,sun8i-v3s-codec-analog";
+ reg = <0x01c23000 0x4>;
+ };
+
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@@ -436,6 +476,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -447,6 +489,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -458,6 +502,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_UART2>;
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
@@ -537,6 +583,8 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
resets = <&ccu RST_BUS_SPI0>;
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 0b678af..8b38f12 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -283,7 +283,7 @@
reg = <0x0 0x60007000 0x0 0x1000>;
};
- actmon@6000c800 {
+ actmon: actmon@6000c800 {
compatible = "nvidia,tegra124-actmon";
reg = <0x0 0x6000c800 0x0 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,6 +295,7 @@
operating-points-v2 = <&emc_bw_dfs_opp_table>;
interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
interconnect-names = "cpu-read";
+ #cooling-cells = <2>;
};
gpio: gpio@6000d000 {
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index 2298fc0..1976c38 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -420,11 +420,14 @@
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
gpio-controller;
#gpio-cells = <2>;
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+
gpio-cfg = <
0x0000 /* MIC_LR_OUT# GPIO, output, low */
0x0000 /* FM2018-enable GPIO, output, low */
@@ -759,7 +762,7 @@
mmc-pwrseq = <&brcm_wifi_pwrseq>;
vmmc-supply = <&vdd_3v3_sys>;
- vqmmc-supply = <&vdd_3v3_sys>;
+ vqmmc-supply = <&vdd_1v8_sys>;
/* Azurewave AW-NH611 BCM4329 */
wifi@1 {
@@ -1030,7 +1033,7 @@
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
- nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
nvidia,headset;
@@ -1056,15 +1059,15 @@
trips {
trip0: cpu-alert0 {
- /* start throttling at 50C */
- temperature = <50000>;
+ /* start throttling at 60C */
+ temperature = <60000>;
hysteresis = <200>;
type = "passive";
};
trip1: cpu-crit {
- /* shut down at 60C */
- temperature = <60000>;
+ /* shut down at 70C */
+ temperature = <70000>;
hysteresis = <2000>;
type = "critical";
};
@@ -1085,6 +1088,7 @@
emc-tables@0 {
nvidia,ram-code = <0>; /* elpida-8gb */
+ reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1182,6 +1186,7 @@
emc-tables@1 {
nvidia,ram-code = <1>; /* elpida-4gb */
+ reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1279,6 +1284,7 @@
emc-tables@2 {
nvidia,ram-code = <2>; /* hynix-8gb */
+ reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1376,6 +1382,7 @@
emc-tables@3 {
nvidia,ram-code = <3>; /* hynix-4gb */
+ reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 86494cb..ae4312e 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -748,7 +748,7 @@
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
- GPIO_ACTIVE_HIGH>;
+ GPIO_ACTIVE_LOW>;
nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
GPIO_ACTIVE_HIGH>;
nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index a348ca3..b31c9bc 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -84,7 +84,7 @@
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
- nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 940a9f3..3180bff 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -2,6 +2,8 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
#include "tegra20.dtsi"
#include "tegra20-cpu-opp.dtsi"
#include "tegra20-cpu-opp-microvolt.dtsi"
@@ -318,6 +320,7 @@
nvidia,ram-code = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0>;
emc-table@166500 {
reg = <166500>;
@@ -497,9 +500,10 @@
};
};
- adt7461@4c {
+ adt7461: temperature-sensor@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
+ #thermal-sensor-cells = <1>;
};
};
@@ -654,11 +658,46 @@
cpu0: cpu@0 {
cpu-supply = <&cpu_vdd_reg>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
cpu-supply = <&cpu_vdd_reg>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <500>; /* milliseconds */
+ polling-delay = <1500>; /* milliseconds */
+
+ thermal-sensors = <&adt7461 1>;
+
+ trips {
+ trip0: cpu-alert0 {
+ /* start throttling at 80C */
+ temperature = <80000>;
+ hysteresis = <200>;
+ type = "passive";
+ };
+
+ trip1: cpu-crit {
+ /* shut down at 85C */
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&trip0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 378f23b2..5811b70 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -52,7 +52,7 @@
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
- nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index c24d4a3..92d494b 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -911,7 +911,7 @@
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
- nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 44ced60..10ff09d 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -61,7 +61,7 @@
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
- GPIO_ACTIVE_HIGH>;
+ GPIO_ACTIVE_LOW>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 99a356c..5a2578b 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -709,7 +709,7 @@
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
- nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
GPIO_ACTIVE_HIGH>;
nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index dc773b1..ae8300b 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -927,7 +927,6 @@
compatible = "ti,bq27541";
reg = <0x55>;
power-supplies = <&power_supply>;
- monitored-battery = <&battery_cell>;
};
power_supply: charger@6a {
@@ -1252,13 +1251,6 @@
};
thermal-zones {
- skin-thermal {
- polling-delay-passive = <1000>; /* milliseconds */
- polling-delay = <0>; /* milliseconds */
-
- thermal-sensors = <&nct72 0>;
- };
-
cpu-thermal {
polling-delay-passive = <1000>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
@@ -1274,8 +1266,8 @@
};
trip1: cpu-crit {
- /* shut down at 60C */
- temperature = <60000>;
+ /* shut down at 65C */
+ temperature = <65000>;
hysteresis = <2000>;
type = "critical";
};
@@ -1287,7 +1279,9 @@
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&actmon THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
index 17b6682..53966fa 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
@@ -182,4 +182,13 @@
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
+
+ pmc@7000e400 {
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x3c>;
+ nvidia,reg-addr = <0x41>;
+ nvidia,reg-data = <0xe0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
index b97da45..9365ae6 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -144,7 +144,16 @@
};
vdd_3v3_sys: regulator@1 {
- gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ pmc@7000e400 {
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x80>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 2dff14b..d9dd115 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -630,7 +630,7 @@
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
- GPIO_ACTIVE_HIGH>;
+ GPIO_ACTIVE_LOW>;
clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
<&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index 9a10e0d..ab8744f 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -463,7 +463,9 @@
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&actmon THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
};
};
};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 44a6dbb..c577c19 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -410,7 +410,7 @@
reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
};
- actmon@6000c800 {
+ actmon: actmon@6000c800 {
compatible = "nvidia,tegra30-actmon";
reg = <0x6000c800 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -422,6 +422,7 @@
operating-points-v2 = <&emc_bw_dfs_opp_table>;
interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
interconnect-names = "cpu-read";
+ #cooling-cells = <2>;
};
gpio: gpio@6000d000 {
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index 58d293b..a3ee647 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -254,6 +254,7 @@
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_GDB_SCRIPTS=y
CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_TIMEOUT=-1
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index 047975e..2db4843 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -247,6 +247,7 @@
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
+CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_OVERLAY_FS=y
CONFIG_TMPFS=y
@@ -276,6 +277,7 @@
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_GDB_SCRIPTS=y
CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_WQ_WATCHDOG=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 06c888a..b1564e0 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -1,6 +1,8 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 513f56b..f4e1873 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -236,6 +236,7 @@
CONFIG_DRM_TOSHIBA_TC358764=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_PANFROST=y
+CONFIG_FB=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_PWM=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 70928cc..079fcd8 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -150,6 +150,8 @@
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_MCS7830=y
+CONFIG_ATH10K=m
+CONFIG_ATH10K_SDIO=m
CONFIG_BRCMFMAC=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 0d6edeb..9a76673 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -109,6 +109,8 @@
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_IXP4XX=y
CONFIG_MTD_RAW_NAND=m
@@ -152,6 +154,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SENSORS_W83781D=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 77b4bea..2ac2418 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -276,6 +276,7 @@
CONFIG_AF_RXRPC=m
CONFIG_RXKAD=y
CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_PCI=y
CONFIG_PCI_MSI=y
@@ -374,6 +375,8 @@
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_USB=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE_SPI=m
@@ -617,6 +620,8 @@
CONFIG_LEDS_CPCAP=m
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP55XX_COMMON=m
+CONFIG_LEDS_LP5523=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_TRIGGERS=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index f25b09e..66c8b09 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -202,7 +202,6 @@
CONFIG_PWM=y
CONFIG_PWM_RCAR=y
CONFIG_PWM_RENESAS_TPU=y
-CONFIG_RESET_CONTROLLER=y
CONFIG_PHY_RCAR_GEN2=y
CONFIG_PHY_RCAR_GEN3_USB2=y
# CONFIG_DNOTIFY is not set
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 13ef3e4..3d8d8af 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -167,6 +167,7 @@
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_CPU_THERMAL=y
+CONFIG_DEVFREQ_THERMAL=y
CONFIG_TEGRA_SOCTHERM=m
CONFIG_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 25b01da..8b48326 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -55,6 +55,7 @@
sysram_base_addr = of_iomap(node, 0);
sysram_base_phys = of_translate_address(node,
of_get_address(node, 0, NULL, NULL));
+ of_node_put(node);
break;
}
@@ -62,6 +63,7 @@
if (!of_device_is_available(node))
continue;
sysram_ns_base_addr = of_iomap(node, 0);
+ of_node_put(node);
break;
}
}
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 9cebd36..d1506ef 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -35,7 +35,7 @@
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
+ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_IMX7D_CA7)$(CONFIG_SOC_LS1021A),)
AFLAGS_headsmp.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 474dedb..f0a073a 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -68,11 +68,13 @@
void v7_secondary_startup(void);
void imx_scu_map_io(void);
void imx_smp_prepare(void);
+void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn);
#else
static inline void imx_scu_map_io(void) {}
static inline void imx_smp_prepare(void) {}
#endif
void imx_src_init(void);
+void imx7_src_init(void);
void imx_gpc_pre_suspend(bool arm_power_off);
void imx_gpc_post_resume(void);
void imx_gpc_mask_all(void);
@@ -131,6 +133,7 @@
#endif
extern const struct smp_operations imx_smp_ops;
+extern const struct smp_operations imx7_smp_ops;
extern const struct smp_operations ls1021a_smp_ops;
#endif
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 766dbdb..fcba58b 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -21,6 +21,15 @@
ENTRY(v7_secondary_startup)
ARM_BE8(setend be) @ go BE8 if entered LE
+ mrc p15, 0, r0, c0, c0, 0
+ lsl r0, r0, #16
+ lsr r0, r0, #20
+ /* 0xc07 is cortex A7's ID */
+ mov r1, #0xc00
+ orr r1, #0x7
+ cmp r0, r1
+ beq secondary_startup
+
set_diag_reg
b secondary_startup
ENDPROC(v7_secondary_startup)
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 82e2239..e24a46d 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -11,6 +11,7 @@
#include <asm/proc-fns.h>
#include "common.h"
+#include "hardware.h"
/*
* platform-specific code to shutdown a CPU
@@ -40,5 +41,7 @@
return 0;
imx_enable_cpu(cpu, false);
imx_set_cpu_arg(cpu, 0);
+ if (cpu_is_imx7d())
+ imx_gpcv2_set_core1_pdn_pup_by_software(true);
return 1;
}
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index f4da205..a2d35f9 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -9,6 +9,12 @@
#include <asm/mach/arch.h>
#include "common.h"
+#include "hardware.h"
+
+static void __init imx50_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX50);
+}
static const char * const imx50_dt_board_compat[] __initconst = {
"fsl,imx50",
@@ -16,5 +22,6 @@
};
DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
+ .init_early = imx50_init_early,
.dt_compat = imx50_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 703998e..11dcc36 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -40,27 +40,6 @@
return 0;
}
-static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
-{
- phy_write(dev, 0x0d, device);
- phy_write(dev, 0x0e, reg);
- phy_write(dev, 0x0d, (1 << 14) | device);
- phy_write(dev, 0x0e, val);
-}
-
-static int ksz9031rn_phy_fixup(struct phy_device *dev)
-{
- /*
- * min rx data delay, max rx/tx clock delay,
- * min rx/tx control delay
- */
- mmd_write_reg(dev, 2, 4, 0);
- mmd_write_reg(dev, 2, 5, 0);
- mmd_write_reg(dev, 2, 8, 0x003ff);
-
- return 0;
-}
-
/*
* fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
* as they are used for slots1-7 PERST#
@@ -89,75 +68,11 @@
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
-static int ar8031_phy_fixup(struct phy_device *dev)
-{
- u16 val;
-
- /* To enable AR8031 output a 125MHz clk from CLK_25M */
- phy_write(dev, 0xd, 0x7);
- phy_write(dev, 0xe, 0x8016);
- phy_write(dev, 0xd, 0x4007);
-
- val = phy_read(dev, 0xe);
- val &= 0xffe3;
- val |= 0x18;
- phy_write(dev, 0xe, val);
-
- /* introduce tx clock delay */
- phy_write(dev, 0x1d, 0x5);
- val = phy_read(dev, 0x1e);
- val |= 0x0100;
- phy_write(dev, 0x1e, val);
-
- return 0;
-}
-
-#define PHY_ID_AR8031 0x004dd074
-
-static int ar8035_phy_fixup(struct phy_device *dev)
-{
- u16 val;
-
- /* Ar803x phy SmartEEE feature cause link status generates glitch,
- * which cause ethernet link down/up issue, so disable SmartEEE
- */
- phy_write(dev, 0xd, 0x3);
- phy_write(dev, 0xe, 0x805d);
- phy_write(dev, 0xd, 0x4003);
-
- val = phy_read(dev, 0xe);
- phy_write(dev, 0xe, val & ~(1 << 8));
-
- /*
- * Enable 125MHz clock from CLK_25M on the AR8031. This
- * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad.
- * Also, introduce a tx clock delay.
- *
- * This is the same as is the AR8031 fixup.
- */
- ar8031_phy_fixup(dev);
-
- /*check phy power*/
- val = phy_read(dev, 0x0);
- if (val & BMCR_PDOWN)
- phy_write(dev, 0x0, val & ~BMCR_PDOWN);
-
- return 0;
-}
-
-#define PHY_ID_AR8035 0x004dd072
-
static void __init imx6q_enet_phy_init(void)
{
if (IS_BUILTIN(CONFIG_PHYLIB)) {
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
- phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
- ksz9031rn_phy_fixup);
- phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
- ar8031_phy_fixup);
- phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
- ar8035_phy_fixup);
}
}
@@ -257,9 +172,6 @@
imx_get_soc_revision());
imx6q_enet_phy_init();
-
- of_platform_default_populate(NULL, NULL, NULL);
-
imx_anatop_init();
cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
imx6q_1588_init();
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 781e2a9..e65ed52 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -15,31 +15,6 @@
#include "common.h"
#include "cpuidle.h"
-static int ar8031_phy_fixup(struct phy_device *dev)
-{
- u16 val;
-
- /* Set RGMII IO voltage to 1.8V */
- phy_write(dev, 0x1d, 0x1f);
- phy_write(dev, 0x1e, 0x8);
-
- /* introduce tx clock delay */
- phy_write(dev, 0x1d, 0x5);
- val = phy_read(dev, 0x1e);
- val |= 0x0100;
- phy_write(dev, 0x1e, val);
-
- return 0;
-}
-
-#define PHY_ID_AR8031 0x004dd074
-static void __init imx6sx_enet_phy_init(void)
-{
- if (IS_BUILTIN(CONFIG_PHYLIB))
- phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
- ar8031_phy_fixup);
-}
-
static void __init imx6sx_enet_clk_sel(void)
{
struct regmap *gpr;
@@ -57,7 +32,6 @@
static inline void imx6sx_enet_init(void)
{
- imx6sx_enet_phy_init();
imx6sx_enet_clk_sel();
}
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index 879c359..6fdd06b 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -14,25 +14,6 @@
#include "common.h"
-static int ar8031_phy_fixup(struct phy_device *dev)
-{
- u16 val;
-
- /* Set RGMII IO voltage to 1.8V */
- phy_write(dev, 0x1d, 0x1f);
- phy_write(dev, 0x1e, 0x8);
-
- /* disable phy AR8031 SmartEEE function. */
- phy_write(dev, 0xd, 0x3);
- phy_write(dev, 0xe, 0x805d);
- phy_write(dev, 0xd, 0x4003);
- val = phy_read(dev, 0xe);
- val &= ~(0x1 << 8);
- phy_write(dev, 0xe, val);
-
- return 0;
-}
-
static int bcm54220_phy_fixup(struct phy_device *dev)
{
/* enable RXC skew select RGMII copper mode */
@@ -44,14 +25,11 @@
return 0;
}
-#define PHY_ID_AR8031 0x004dd074
#define PHY_ID_BCM54220 0x600d8589
static void __init imx7d_enet_phy_init(void)
{
if (IS_BUILTIN(CONFIG_PHYLIB)) {
- phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
- ar8031_phy_fixup);
phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff,
bcm54220_phy_fixup);
}
@@ -91,7 +69,7 @@
static void __init imx7d_init_irq(void)
{
imx_init_revision_from_anatop();
- imx_src_init();
+ imx7_src_init();
irqchip_init();
}
@@ -102,6 +80,7 @@
};
DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
+ .smp = smp_ops(imx7_smp_ops),
.init_irq = imx7d_init_irq,
.init_machine = imx7d_init_machine,
.init_late = imx7d_init_late,
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index cf4e933..9726390 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -92,6 +92,32 @@
#endif
};
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init imx7_smp_init_cpus(void)
+{
+ struct device_node *np;
+ int i, ncores = 0;
+
+ /* The iMX7D SCU does not report core count, get it from DT */
+ for_each_of_cpu_node(np)
+ ncores++;
+
+ for (i = ncores; i < NR_CPUS; i++)
+ set_cpu_possible(i, false);
+}
+
+const struct smp_operations imx7_smp_ops __initconst = {
+ .smp_init_cpus = imx7_smp_init_cpus,
+ .smp_boot_secondary = imx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = imx_cpu_die,
+ .cpu_kill = imx_cpu_kill,
+#endif
+};
+
#define DCFG_CCSR_SCRATCHRW1 0x200
static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle)
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index f52f371..95fd1fb 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -6,15 +6,19 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/reset-controller.h>
#include <linux/smp.h>
#include <asm/smp_plat.h>
#include "common.h"
+#include "hardware.h"
#define SRC_SCR 0x000
-#define SRC_GPR1 0x020
+#define SRC_GPR1_V1 0x020
+#define SRC_GPR1_V2 0x074
+#define SRC_GPR1(gpr_v2) ((gpr_v2) ? SRC_GPR1_V2 : SRC_GPR1_V1)
#define BP_SRC_SCR_WARM_RESET_ENABLE 0
#define BP_SRC_SCR_SW_GPU_RST 1
#define BP_SRC_SCR_SW_VPU_RST 2
@@ -23,9 +27,18 @@
#define BP_SRC_SCR_SW_IPU2_RST 12
#define BP_SRC_SCR_CORE1_RST 14
#define BP_SRC_SCR_CORE1_ENABLE 22
+/* below is for i.MX7D */
+#define SRC_A7RCR1 0x008
+#define BP_SRC_A7RCR1_A7_CORE1_ENABLE 1
+#define GPC_CPU_PGC_SW_PUP_REQ 0xf0
+#define GPC_CPU_PGC_SW_PDN_REQ 0xfc
+#define GPC_PGC_C1 0x840
+#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7 0x2
static void __iomem *src_base;
static DEFINE_SPINLOCK(scr_lock);
+static bool gpr_v2;
+static void __iomem *gpc_base;
static const int sw_reset_bits[5] = {
BP_SRC_SCR_SW_GPU_RST,
@@ -73,17 +86,64 @@
.nr_resets = ARRAY_SIZE(sw_reset_bits),
};
+static void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset)
+{
+ writel_relaxed(enable, gpc_base + offset);
+}
+
+/*
+ * The motivation for bringing up the second i.MX7D core inside the kernel
+ * is that legacy vendor bootloaders usually do not implement PSCI support.
+ * This is a significant blocker for systems in the field that are running old
+ * bootloader versions to upgrade to a modern mainline kernel version, as only
+ * one CPU of the i.MX7D would be brought up.
+ * Bring up the second i.MX7D core inside the kernel to make the migration
+ * path to mainline kernel easier for the existing iMX7D users.
+ */
+void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn)
+{
+ u32 reg = pdn ? GPC_CPU_PGC_SW_PDN_REQ : GPC_CPU_PGC_SW_PUP_REQ;
+ u32 val, pup;
+ int ret;
+
+ imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C1);
+ val = readl_relaxed(gpc_base + reg);
+ val |= BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7;
+ writel_relaxed(val, gpc_base + reg);
+
+ ret = readl_relaxed_poll_timeout_atomic(gpc_base + reg, pup,
+ !(pup & BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7),
+ 5, 1000000);
+ if (ret < 0) {
+ pr_err("i.MX7D: CORE1_A7 power up timeout\n");
+ val &= ~BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7;
+ writel_relaxed(val, gpc_base + reg);
+ }
+
+ imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C1);
+}
+
void imx_enable_cpu(int cpu, bool enable)
{
u32 mask, val;
cpu = cpu_logical_map(cpu);
- mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
spin_lock(&scr_lock);
- val = readl_relaxed(src_base + SRC_SCR);
- val = enable ? val | mask : val & ~mask;
- val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
- writel_relaxed(val, src_base + SRC_SCR);
+ if (gpr_v2) {
+ if (enable)
+ imx_gpcv2_set_core1_pdn_pup_by_software(false);
+
+ mask = 1 << (BP_SRC_A7RCR1_A7_CORE1_ENABLE + cpu - 1);
+ val = readl_relaxed(src_base + SRC_A7RCR1);
+ val = enable ? val | mask : val & ~mask;
+ writel_relaxed(val, src_base + SRC_A7RCR1);
+ } else {
+ mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+ val = readl_relaxed(src_base + SRC_SCR);
+ val = enable ? val | mask : val & ~mask;
+ val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
+ writel_relaxed(val, src_base + SRC_SCR);
+ }
spin_unlock(&scr_lock);
}
@@ -91,19 +151,19 @@
{
cpu = cpu_logical_map(cpu);
writel_relaxed(__pa_symbol(jump_addr),
- src_base + SRC_GPR1 + cpu * 8);
+ src_base + SRC_GPR1(gpr_v2) + cpu * 8);
}
u32 imx_get_cpu_arg(int cpu)
{
cpu = cpu_logical_map(cpu);
- return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+ return readl_relaxed(src_base + SRC_GPR1(gpr_v2) + cpu * 8 + 4);
}
void imx_set_cpu_arg(int cpu, u32 arg)
{
cpu = cpu_logical_map(cpu);
- writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+ writel_relaxed(arg, src_base + SRC_GPR1(gpr_v2) + cpu * 8 + 4);
}
void __init imx_src_init(void)
@@ -131,3 +191,26 @@
writel_relaxed(val, src_base + SRC_SCR);
spin_unlock(&scr_lock);
}
+
+void __init imx7_src_init(void)
+{
+ struct device_node *np;
+
+ gpr_v2 = true;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-src");
+ if (!np)
+ return;
+
+ src_base = of_iomap(np, 0);
+ if (!src_base)
+ return;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-gpc");
+ if (!np)
+ return;
+
+ gpc_base = of_iomap(np, 0);
+ if (!gpc_base)
+ return;
+}
diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S
index 41b8aad..46570ec 100644
--- a/arch/arm/mach-imx/suspend-imx53.S
+++ b/arch/arm/mach-imx/suspend-imx53.S
@@ -28,11 +28,11 @@
* ^
* ^
* imx53_suspend code
- * PM_INFO structure(imx53_suspend_info)
+ * PM_INFO structure(imx5_cpu_suspend_info)
* ======================== low address =======================
*/
-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
#define SUSPEND_INFO_MX53_M4IF_V_OFFSET 0x0
#define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET 0x4
#define SUSPEND_INFO_MX53_IO_COUNT_OFFSET 0x8
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 165c184..bf14d65 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -7,7 +7,7 @@
config MACH_IXP4XX_OF
bool
- prompt "Devce Tree IXP4xx boards"
+ prompt "Device Tree IXP4xx boards"
default y
select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
select I2C
@@ -20,7 +20,7 @@
config MACH_NSLU2
bool
prompt "Linksys NSLU2"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Linksys's
NSLU2 NAS device. For more information on this platform,
@@ -28,7 +28,7 @@
config MACH_AVILA
bool "Avila"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support the Gateworks
Avila Network Platform. For more information on this platform,
@@ -44,7 +44,7 @@
config ARCH_ADI_COYOTE
bool "Coyote"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more
@@ -52,7 +52,7 @@
config MACH_GATEWAY7001
bool "Gateway 7001"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Gateway's
7001 Access Point. For more information on this platform,
@@ -60,7 +60,7 @@
config MACH_WG302V2
bool "Netgear WG302 v2 / WAG302 v2"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Netgear's
WG302 v2 or WAG302 v2 Access Points. For more information
@@ -68,6 +68,7 @@
config ARCH_IXDP425
bool "IXDP425"
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Intel's
IXDP425 Development Platform (Also known as Richfield).
@@ -75,6 +76,7 @@
config MACH_IXDPG425
bool "IXDPG425"
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Intel's
IXDPG425 Development Platform (Also known as Montajade).
@@ -120,7 +122,7 @@
config MACH_NAS100D
bool
prompt "NAS100D"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Iomega's
NAS 100d device. For more information on this platform,
@@ -129,7 +131,7 @@
config MACH_DSMG600
bool
prompt "D-Link DSM-G600 RevA"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support D-Link's
DSM-G600 RevA device. For more information on this platform,
@@ -143,7 +145,7 @@
config MACH_FSG
bool
prompt "Freecom FSG-3"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Freecom's
FSG-3 device. For more information on this platform,
@@ -152,7 +154,7 @@
config MACH_ARCOM_VULCAN
bool
prompt "Arcom/Eurotech Vulcan"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Arcom's
Vulcan board.
@@ -173,7 +175,7 @@
config MACH_GTWX5715
bool "Gemtek WX5715 (Linksys WRV54G)"
depends on ARCH_IXP4XX
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
This board is currently inside the Linksys WRV54G Gateways.
@@ -196,7 +198,7 @@
config MACH_MICCPT
bool "Omicron MICCPT"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support the MICCPT
board from OMICRON electronics GmbH.
@@ -209,9 +211,16 @@
comment "IXP4xx Options"
+config IXP4XX_PCI_LEGACY
+ bool "IXP4xx legacy PCI driver support"
+ depends on PCI
+ help
+ Selects legacy PCI driver.
+ Not recommended for new development.
+
config IXP4XX_INDIRECT_PCI
bool "Use indirect PCI memory access"
- depends on PCI
+ depends on IXP4XX_PCI_LEGACY
help
IXP4xx provides two methods of accessing PCI memory space:
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 1981b33..ec1d302 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -19,6 +19,7 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/gpio/machine.h>
+#include <linux/platform_data/pata_ixp4xx_cf.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 007a444..b5eadd7 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -27,12 +27,12 @@
#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/sched_clock.h>
+#include <linux/soc/ixp4xx/cpu.h>
#include <linux/irqchip/irq-ixp4xx.h>
#include <linux/platform_data/timer-ixp4xx.h>
#include <linux/dma-map-ops.h>
#include <mach/udc.h>
#include <mach/hardware.h>
-#include <mach/io.h>
#include <linux/uaccess.h>
#include <asm/page.h>
#include <asm/exception.h>
@@ -44,6 +44,27 @@
#include "irqs.h"
+u32 ixp4xx_read_feature_bits(void)
+{
+ u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
+
+ if (cpu_is_ixp42x_rev_a0())
+ return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+ IXP4XX_FEATURE_AES);
+ if (cpu_is_ixp42x())
+ return val & IXP42X_FEATURE_MASK;
+ if (cpu_is_ixp43x())
+ return val & IXP43X_FEATURE_MASK;
+ return val & IXP46X_FEATURE_MASK;
+}
+EXPORT_SYMBOL(ixp4xx_read_feature_bits);
+
+void ixp4xx_write_feature_bits(u32 value)
+{
+ __raw_writel(~value, IXP4XX_EXP_CFG2);
+}
+EXPORT_SYMBOL(ixp4xx_write_feature_bits);
+
#define IXP4XX_TIMER_FREQ 66666000
/*************************************************************************
@@ -215,6 +236,27 @@
}
};
+/* A single 32-bit register on IXP46x */
+#define IXP4XX_HWRANDOM_BASE_PHYS 0x70002100
+
+static struct resource ixp46x_hwrandom_resource[] = {
+ {
+ .start = IXP4XX_HWRANDOM_BASE_PHYS,
+ .end = IXP4XX_HWRANDOM_BASE_PHYS + 0x3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ixp46x_hwrandom_device = {
+ .name = "ixp4xx-hwrandom",
+ .id = -1,
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ixp46x_hwrandom_resource,
+ .num_resources = ARRAY_SIZE(ixp46x_hwrandom_resource),
+};
+
/*
* I2C controller. The IXP46x uses the same block as the IOP3xx, so
* we just use the same device name.
@@ -227,7 +269,8 @@
};
static struct platform_device *ixp46x_devices[] __initdata = {
- &ixp46x_i2c_controller
+ &ixp46x_hwrandom_device,
+ &ixp46x_i2c_controller,
};
unsigned long ixp4xx_exp_bus_size;
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 507ee38..844329c 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -28,6 +28,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <mach/hardware.h>
#include "irqs.h"
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
deleted file mode 100644
index b872a53..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/cpu.h
- *
- * IXP4XX cpu type detection
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
-
-#include <linux/io.h>
-#include <asm/cputype.h>
-
-/* Processor id value in CP15 Register 0 */
-#define IXP42X_PROCESSOR_ID_VALUE 0x690541c0 /* including unused 0x690541Ex */
-#define IXP42X_PROCESSOR_ID_MASK 0xffffffc0
-
-#define IXP43X_PROCESSOR_ID_VALUE 0x69054040
-#define IXP43X_PROCESSOR_ID_MASK 0xfffffff0
-
-#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
-#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
-
-#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
- IXP42X_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
- IXP42X_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
- IXP43X_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
- IXP46X_PROCESSOR_ID_VALUE)
-
-static inline u32 ixp4xx_read_feature_bits(void)
-{
- u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
-
- if (cpu_is_ixp42x_rev_a0())
- return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
- IXP4XX_FEATURE_AES);
- if (cpu_is_ixp42x())
- return val & IXP42X_FEATURE_MASK;
- if (cpu_is_ixp43x())
- return val & IXP43X_FEATURE_MASK;
- return val & IXP46X_FEATURE_MASK;
-}
-
-static inline void ixp4xx_write_feature_bits(u32 value)
-{
- __raw_writel(~value, IXP4XX_EXP_CFG2);
-}
-
-#endif /* _ASM_ARCH_CPU_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index b884eed..b2b7301 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -23,7 +23,7 @@
#include "ixp4xx-regs.h"
#ifndef __ASSEMBLER__
-#include <mach/cpu.h>
+#include <linux/soc/ixp4xx/cpu.h>
#endif
/* Platform helper functions and definitions */
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index 708d085..abb07f10 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -45,21 +45,21 @@
* it can be used with the low-level debug code.
*/
#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEC00000)
#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000
/*
* PCI Config registers
*/
#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000
-#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000)
+#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEC13000)
#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000
/*
* Expansion BUS Configuration registers
*/
#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000
+#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEC14000
#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000
#define IXP4XX_EXP_CS0_OFFSET 0x00
@@ -120,6 +120,7 @@
#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
+/* The UART is explicitly put in the beginning of fixmap */
#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
@@ -299,58 +300,4 @@
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-/* "fuse" bits of IXP_EXP_CFG2 */
-/* All IXP4xx CPUs */
-#define IXP4XX_FEATURE_RCOMP (1 << 0)
-#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
-#define IXP4XX_FEATURE_HASH (1 << 2)
-#define IXP4XX_FEATURE_AES (1 << 3)
-#define IXP4XX_FEATURE_DES (1 << 4)
-#define IXP4XX_FEATURE_HDLC (1 << 5)
-#define IXP4XX_FEATURE_AAL (1 << 6)
-#define IXP4XX_FEATURE_HSS (1 << 7)
-#define IXP4XX_FEATURE_UTOPIA (1 << 8)
-#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
-#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
-#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
-#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
-#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
-#define IXP4XX_FEATURE_PCI (1 << 14)
-#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
-#define IXP42X_FEATURE_MASK (IXP4XX_FEATURE_RCOMP | \
- IXP4XX_FEATURE_USB_DEVICE | \
- IXP4XX_FEATURE_HASH | \
- IXP4XX_FEATURE_AES | \
- IXP4XX_FEATURE_DES | \
- IXP4XX_FEATURE_HDLC | \
- IXP4XX_FEATURE_AAL | \
- IXP4XX_FEATURE_HSS | \
- IXP4XX_FEATURE_UTOPIA | \
- IXP4XX_FEATURE_NPEB_ETH0 | \
- IXP4XX_FEATURE_NPEC_ETH | \
- IXP4XX_FEATURE_RESET_NPEA | \
- IXP4XX_FEATURE_RESET_NPEB | \
- IXP4XX_FEATURE_RESET_NPEC | \
- IXP4XX_FEATURE_PCI | \
- IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
- IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-
-
-/* IXP43x/46x CPUs */
-#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
-#define IXP4XX_FEATURE_USB_HOST (1 << 18)
-#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
-#define IXP43X_FEATURE_MASK (IXP42X_FEATURE_MASK | \
- IXP4XX_FEATURE_ECC_TIMESYNC | \
- IXP4XX_FEATURE_USB_HOST | \
- IXP4XX_FEATURE_NPEA_ETH)
-
-/* IXP46x CPU (including IXP455) only */
-#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
-#define IXP4XX_FEATURE_RSA (1 << 21)
-#define IXP46X_FEATURE_MASK (IXP43X_FEATURE_MASK | \
- IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
- IXP4XX_FEATURE_RSA)
-
#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 6d403fe..d8b4df9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -80,20 +80,6 @@
#define IXP4XX_UART_XTAL 14745600
/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
- volatile u32 *cs0_cfg;
- volatile u32 *cs1_cfg;
- unsigned long cs0_bits;
- unsigned long cs1_bits;
- void __iomem *cs0;
- void __iomem *cs1;
-};
-
-/*
* Frequency of clock used for primary clocksource
*/
extern unsigned long ixp4xx_timer_freq;
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
index 7449b83..f990471 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -9,8 +9,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/ixp4xx-regs.h>
+/*
+ * These are the only fixed phys to virt mappings we ever need
+ * we put it right after the UART mapping at 0xffc80000-0xffc81fff
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000
+#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEC14000
static struct map_desc ixp4xx_of_io_desc[] __initdata = {
/*
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 6959ad2..6133cf0 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -33,6 +33,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <mach/hardware.h>
#include "irqs.h"
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index a428bb9..8526a70 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -31,6 +31,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
+#include <mach/hardware.h>
#include "irqs.h"
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 9536b8f..208c700 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -65,14 +65,14 @@
config MACH_OMAP_H2
bool "TI H2 Support"
depends on ARCH_OMAP16XX
- help
+ help
TI OMAP 1610/1611B H2 board support. Say Y here if you have such
a board.
config MACH_OMAP_H3
bool "TI H3 Support"
depends on ARCH_OMAP16XX
- help
+ help
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
@@ -85,14 +85,14 @@
config MACH_OMAP_OSK
bool "TI OSK Support"
depends on ARCH_OMAP16XX
- help
+ help
TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
if you have such a board.
config OMAP_OSK_MISTRAL
bool "Mistral QVGA board Support"
depends on MACH_OMAP_OSK
- help
+ help
The OSK supports an optional add-on board with a Quarter-VGA
touchscreen, PDA-ish buttons, a resume button, bicolor LED,
and camera connector. Say Y here if you have this board.
@@ -100,14 +100,14 @@
config MACH_OMAP_PERSEUS2
bool "TI Perseus2"
depends on ARCH_OMAP730
- help
+ help
Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
a board.
config MACH_OMAP_FSAMPLE
bool "TI F-Sample"
depends on ARCH_OMAP730
- help
+ help
Support for TI OMAP 850 F-Sample board. Say Y here if you have such
a board.
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index d02fe63..14beb59 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -26,7 +26,6 @@
extern struct omap_domain_base cm_base;
extern struct omap_domain_base cm2_base;
-extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2);
# endif
/*
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index b7ea609..e2d069f 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -38,19 +38,6 @@
#define CM_SINGLE_INSTANCE 0x2
/**
- * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
- * @cm: CM base virtual address
- * @cm2: CM2 base virtual address (if present on the booted SoC)
- *
- * XXX Will be replaced when the PRM/CM drivers are completed.
- */
-void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2)
-{
- cm_base.va = cm;
- cm2_base.va = cm2;
-}
-
-/**
* cm_split_idlest_reg - split CM_IDLEST reg addr into its components
* @idlest_reg: CM_IDLEST* virtual address
* @prcm_inst: pointer to an s16 to return the PRCM instance offset
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index db446f2..32f58f5 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -130,7 +130,6 @@
void am35xx_init_early(void);
void ti814x_init_early(void);
void ti816x_init_early(void);
-void am33xx_init_early(void);
void am43xx_init_early(void);
void am43xx_init_late(void);
void omap4430_init_early(void);
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 73338cf..062d431 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -136,11 +136,6 @@
static struct omap3_control_regs control_context;
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
-void __init omap2_set_globals_control(void __iomem *ctrl)
-{
- omap2_ctrl_base = ctrl;
-}
-
u8 omap_ctrl_readb(u16 offset)
{
u32 val;
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index eceb4b0..c4ca30ba 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -528,7 +528,6 @@
void omap3_ctrl_init(void);
int omap2_control_base_init(void);
int omap_control_init(void);
-void omap2_set_globals_control(void __iomem *ctrl);
void __init omap3_control_legacy_iomap_init(void);
#else
#define omap_ctrl_readb(x) 0
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 56f2c0b..bf0d25f 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -8,6 +8,7 @@
#include <linux/cpuidle.h>
#include <linux/platform_data/pm33xx.h>
+#include <linux/suspend.h>
#include <asm/cpuidle.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
@@ -324,6 +325,44 @@
return NULL;
}
+#ifdef CONFIG_SUSPEND
+/*
+ * Block system suspend initially. Later on pm33xx sets up it's own
+ * platform_suspend_ops after probe. That depends also on loaded
+ * wkup_m3_ipc and booted am335x-pm-firmware.elf.
+ */
+static int amx3_suspend_block(suspend_state_t state)
+{
+ pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n");
+
+ return -EINVAL;
+}
+
+static int amx3_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static const struct platform_suspend_ops amx3_blocked_pm_ops = {
+ .begin = amx3_suspend_block,
+ .valid = amx3_pm_valid,
+};
+
+static void __init amx3_block_suspend(void)
+{
+ suspend_set_ops(&amx3_blocked_pm_ops);
+}
+#else
+static inline void amx3_block_suspend(void)
+{
+}
+#endif /* CONFIG_SUSPEND */
+
int __init amx3_common_pm_init(void)
{
struct am33xx_pm_platform_data *pdata;
@@ -337,6 +376,7 @@
devinfo.size_data = sizeof(*pdata);
devinfo.id = -1;
platform_device_register_full(&devinfo);
+ amx3_block_suspend();
return 0;
}
diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
index a3f46aa..313e080 100644
--- a/arch/arm/mach-s3c/mach-rx1950.c
+++ b/arch/arm/mach-s3c/mach-rx1950.c
@@ -271,7 +271,6 @@
break;
default:
return -EINVAL;
- break;
}
if (delay_on && delay_off && !*delay_on && !*delay_off)
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 000e821..80fb5a4 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -27,6 +27,7 @@
#include <linux/vmalloc.h>
#include <linux/io.h>
#include <linux/sizes.h>
+#include <linux/memblock.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
@@ -284,7 +285,8 @@
* Don't allow RAM to be mapped with mismatched attributes - this
* causes problems with ARMv6+
*/
- if (WARN_ON(pfn_valid(pfn) && mtype != MT_MEMORY_RW))
+ if (WARN_ON(memblock_is_map_memory(PFN_PHYS(pfn)) &&
+ mtype != MT_MEMORY_RW))
return NULL;
area = get_vm_area_caller(size, VM_IOREMAP, caller);
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 7336c1f..b0ce18d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -16,6 +16,7 @@
select IRQ_FASTEOI_HIERARCHY_HANDLERS
select PINCTRL
select RESET_CONTROLLER
+ select SUN4I_TIMER
help
This enables support for Allwinner sunxi based SoCs like the A64.
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 3b5b1c4..7bc37d0 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -149,7 +149,6 @@
KBUILD_CPPFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
KBUILD_AFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
-core-y += arch/arm64/
libs-y := arch/arm64/lib/ $(libs-y)
libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 41ce680..a96d9d2 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -25,6 +25,7 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 79adea3..5b44a97 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -25,6 +25,11 @@
/* Backlight configuration differs per PinePhone revision. */
};
+ bt_sco_codec: bt-sco-codec {
+ #sound-dai-cells = <1>;
+ compatible = "linux,bt-sco";
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -91,6 +96,8 @@
};
&codec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&aif3_pins>;
status = "okay";
};
@@ -426,6 +433,7 @@
&sound {
status = "okay";
+ simple-audio-card,name = "PinePhone";
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
simple-audio-card,widgets = "Microphone", "Headset Microphone",
"Microphone", "Internal Microphone",
@@ -447,6 +455,23 @@
"MIC1", "Internal Microphone",
"Headset Microphone", "HBIAS",
"MIC2", "Headset Microphone";
+
+ simple-audio-card,dai-link@2 {
+ format = "dsp_a";
+ frame-master = <&link2_codec>;
+ bitclock-master = <&link2_codec>;
+ bitclock-inversion;
+
+ link2_cpu: cpu {
+ sound-dai = <&bt_sco_codec 0>;
+ };
+
+ link2_codec: codec {
+ sound-dai = <&codec 2>;
+ dai-tdm-slot-num = <1>;
+ dai-tdm-slot-width = <32>;
+ };
+ };
};
&uart0 {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index e22b94c..5e66ce1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -79,7 +79,7 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
- phy-mode = "rgmii-id";
+ phy-mode = "rgmii-txid";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <®_dc1sw>;
status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 5b30e6c..6ddb717 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -131,12 +131,10 @@
};
sound: sound {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "simple-audio-card";
simple-audio-card,name = "sun50i-a64-audio";
- simple-audio-card,format = "i2s";
- simple-audio-card,frame-master = <&cpudai>;
- simple-audio-card,bitclock-master = <&cpudai>;
- simple-audio-card,mclk-fs = <128>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
"Left DAC", "DACL",
@@ -145,12 +143,19 @@
"ADCR", "Right ADC";
status = "disabled";
- cpudai: simple-audio-card,cpu {
- sound-dai = <&dai>;
- };
+ simple-audio-card,dai-link@0 {
+ format = "i2s";
+ frame-master = <&link0_cpu>;
+ bitclock-master = <&link0_cpu>;
+ mclk-fs = <128>;
- link_codec: simple-audio-card,codec {
- sound-dai = <&codec>;
+ link0_cpu: cpu {
+ sound-dai = <&dai>;
+ };
+
+ link0_codec: codec {
+ sound-dai = <&codec 0>;
+ };
};
};
@@ -659,6 +664,18 @@
interrupt-controller;
#interrupt-cells = <3>;
+ /omit-if-no-ref/
+ aif2_pins: aif2-pins {
+ pins = "PB4", "PB5", "PB6", "PB7";
+ function = "aif2";
+ };
+
+ /omit-if-no-ref/
+ aif3_pins: aif3-pins {
+ pins = "PG10", "PG11", "PG12", "PG13";
+ function = "aif3";
+ };
+
csi_pins: csi-pins {
pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
"PE7", "PE8", "PE9", "PE10", "PE11";
@@ -799,6 +816,23 @@
};
};
+ timer@1c20c00 {
+ compatible = "allwinner,sun50i-a64-timer",
+ "allwinner,sun8i-a23-timer";
+ reg = <0x01c20c00 0xa0>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ wdt0: watchdog@1c20ca0 {
+ compatible = "allwinner,sun50i-a64-wdt",
+ "allwinner,sun6i-a31-wdt";
+ reg = <0x01c20ca0 0x20>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-spdif",
@@ -880,7 +914,7 @@
};
codec: codec@1c22e00 {
- #sound-dai-cells = <0>;
+ #sound-dai-cells = <1>;
compatible = "allwinner,sun50i-a64-codec",
"allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x600>;
@@ -1325,13 +1359,5 @@
#address-cells = <1>;
#size-cells = <0>;
};
-
- wdt0: watchdog@1c20ca0 {
- compatible = "allwinner,sun50i-a64-wdt",
- "allwinner,sun6i-a31-wdt";
- reg = <0x01c20ca0 0x20>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc24M>;
- };
};
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
new file mode 100644
index 0000000..55bcdf8
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
+ *
+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
+ * Copyright (C) 2017 Antony Antony <antony@phenome.org>
+ * Copyright (C) 2016 ARM Ltd.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "FriendlyARM NanoPi R1S H5";
+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
+
+ aliases {
+ ethernet0 = &emac;
+ ethernet1 = &rtl8189etv;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ r-gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ status = "okay";
+ };
+
+ vdd_cpux: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0x1>;
+ states = <1100000 0x0>, <1300000 0x1>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpux>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "microchip,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8189etv: sdio_wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pa_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ /* USB Type-A port's VBUS is always on */
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 5081586..30d396e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -271,6 +271,15 @@
};
};
+ timer@3009000 {
+ compatible = "allwinner,sun50i-h6-timer",
+ "allwinner,sun8i-a23-timer";
+ reg = <0x03009000 0xa0>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
watchdog: watchdog@30090a0 {
compatible = "allwinner,sun50i-h6-wdt",
"allwinner,sun6i-a31-wdt";
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index a58ccec..faa0a79 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -48,6 +48,7 @@
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 895c43c..3f5254e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1871,6 +1871,7 @@
status = "disabled";
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
+ fifo-size = <128>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 793d48f..00c6f53 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2317,6 +2317,7 @@
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
+ fifo-size = <128>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 3d00404..6b457b2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -301,6 +301,7 @@
reg = <0x0 0x84c0 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
+ fifo-size = <128>;
};
uart_B: serial@84dc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 66d6752..3cf4ecb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -171,11 +171,16 @@
sound {
compatible = "amlogic,axg-sound-card";
model = "KHADAS-VIM3";
- audio-aux-devs = <&tdmout_a>;
+ audio-aux-devs = <&tdmin_a>, <&tdmout_a>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
"TDMOUT_A IN 2", "FRDDR_C OUT 0",
- "TDM_A Playback", "TDMOUT_A OUT";
+ "TDM_A Playback", "TDMOUT_A OUT",
+ "TDMIN_A IN 0", "TDM_A Capture",
+ "TDMIN_A IN 3", "TDM_A Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
@@ -198,8 +203,20 @@
sound-dai = <&frddr_c>;
};
- /* 8ch hdmi interface */
dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-6 {
sound-dai = <&tdmif_a>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
@@ -214,7 +231,7 @@
};
/* hdmi glue */
- dai-link-4 {
+ dai-link-7 {
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
codec {
@@ -454,10 +471,26 @@
status = "okay";
};
+&tdmin_a {
+ status = "okay";
+};
+
&tdmout_a {
status = "okay";
};
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
&tohdmitx {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
new file mode 100644
index 0000000..effaa13
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -0,0 +1,646 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "bananapi,bpi-m5", "amlogic,sm1";
+ model = "Banana Pi BPI-M5";
+
+ adc_keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 2>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+
+ key {
+ label = "SW3";
+ linux,code = <BTN_3>;
+ press-threshold-microvolt = <1700000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = ðmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* TOFIX: handle CVBS_DET on SARADC channel 0 */
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key {
+ label = "SW1";
+ linux,code = <BTN_1>;
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ };
+
+ blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ emmc_1v8: regulator-emmc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vddio_c: regulator-vddio_c {
+ compatible = "regulator-gpio";
+ regulator-name = "VDDIO_C";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+
+ gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
+ gpios-states = <1>;
+
+ states = <1800000 0>,
+ <3300000 1>;
+ };
+
+ tflash_vdd: regulator-tflash_vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "TFLASH_VDD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_in>;
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ vddao_1v8: regulator-vddao_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ vddcpu: regulator-vddcpu {
+ /*
+ * SY8120B1ABC DC/DC Regulator.
+ */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU";
+ regulator-min-microvolt = <690000>;
+ regulator-max-microvolt = <1050000>;
+
+ vin-supply = <&dc_in>;
+
+ pwms = <&pwm_AO_cd 1 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* USB Hub Power Enable */
+ vl_pwr_en: regulator-vl_pwr_en {
+ compatible = "regulator-fixed";
+ regulator-name = "VL_PWR_EN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+
+ gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "BPI-M5";
+ audio-widgets = "Line", "Lineout";
+ audio-aux-devs = <&tdmout_b>, <&tdmout_c>,
+ <&tdmin_a>, <&tdmin_b>, <&tdmin_c>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "TDMOUT_C IN 1", "FRDDR_B OUT 2",
+ "TDMOUT_C IN 2", "FRDDR_C OUT 2",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 4", "TDM_B Loopback",
+ "TDMIN_B IN 4", "TDM_B Loopback",
+ "TDMIN_C IN 4", "TDM_B Loopback",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TDMIN_B IN 5", "TDM_C Loopback",
+ "TDMIN_C IN 5", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "TODDR_A IN 2", "TDMIN_C OUT",
+ "TODDR_B IN 2", "TDMIN_C OUT",
+ "TODDR_C IN 2", "TDMIN_C OUT",
+ "Lineout", "ACODEC LOLP",
+ "Lineout", "ACODEC LORP";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-6 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_B>;
+ };
+ };
+
+ /* i2s jack output interface */
+ dai-link-7 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+ };
+
+ codec-1 {
+ sound-dai = <&toacodec TOACODEC_IN_C>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-8 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+
+ /* acodec glue */
+ dai-link-9 {
+ sound-dai = <&toacodec TOACODEC_OUT>;
+
+ codec {
+ sound-dai = <&acodec>;
+ };
+ };
+ };
+};
+
+&acodec {
+ AVDD-supply = <&vddao_1v8>;
+ status = "okay";
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU1_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu2 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU2_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu3 {
+ cpu-supply = <&vddcpu>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPU3_CLK>;
+ clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+ðmac {
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&external_phy>;
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&gpio {
+ gpio-line-names =
+ /* GPIOZ */
+ "ETH_MDIO", /* GPIOZ_0 */
+ "ETH_MDC", /* GPIOZ_1 */
+ "ETH_RXCLK", /* GPIOZ_2 */
+ "ETH_RX_DV", /* GPIOZ_3 */
+ "ETH_RXD0", /* GPIOZ_4 */
+ "ETH_RXD1", /* GPIOZ_5 */
+ "ETH_RXD2", /* GPIOZ_6 */
+ "ETH_RXD3", /* GPIOZ_7 */
+ "ETH_TXCLK", /* GPIOZ_8 */
+ "ETH_TXEN", /* GPIOZ_9 */
+ "ETH_TXD0", /* GPIOZ_10 */
+ "ETH_TXD1", /* GPIOZ_11 */
+ "ETH_TXD2", /* GPIOZ_12 */
+ "ETH_TXD3", /* GPIOZ_13 */
+ "ETH_INTR", /* GPIOZ_14 */
+ "ETH_NRST", /* GPIOZ_15 */
+ /* GPIOH */
+ "HDMI_SDA", /* GPIOH_0 */
+ "HDMI_SCL", /* GPIOH_1 */
+ "HDMI_HPD", /* GPIOH_2 */
+ "HDMI_CEC", /* GPIOH_3 */
+ "VL-RST_N", /* GPIOH_4 */
+ "CON1-P36", /* GPIOH_5 */
+ "VL-PWREN", /* GPIOH_6 */
+ "WiFi_3V3_1V8", /* GPIOH_7 */
+ "TFLASH_VDD_EN", /* GPIOH_8 */
+ /* BOOT */
+ "eMMC_D0", /* BOOT_0 */
+ "eMMC_D1", /* BOOT_1 */
+ "eMMC_D2", /* BOOT_2 */
+ "eMMC_D3", /* BOOT_3 */
+ "eMMC_D4", /* BOOT_4 */
+ "eMMC_D5", /* BOOT_5 */
+ "eMMC_D6", /* BOOT_6 */
+ "eMMC_D7", /* BOOT_7 */
+ "eMMC_CLK", /* BOOT_8 */
+ "",
+ "eMMC_CMD", /* BOOT_10 */
+ "",
+ "eMMC_RST#", /* BOOT_12 */
+ "eMMC_DS", /* BOOT_13 */
+ /* GPIOC */
+ "SD_D0_B", /* GPIOC_0 */
+ "SD_D1_B", /* GPIOC_1 */
+ "SD_D2_B", /* GPIOC_2 */
+ "SD_D3_B", /* GPIOC_3 */
+ "SD_CLK_B", /* GPIOC_4 */
+ "SD_CMD_B", /* GPIOC_5 */
+ "CARD_EN_DET", /* GPIOC_6 */
+ "",
+ /* GPIOA */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "",
+ "CON1-P27", /* GPIOA_14 */
+ "CON1-P28", /* GPIOA_15 */
+ /* GPIOX */
+ "CON1-P16", /* GPIOX_0 */
+ "CON1-P18", /* GPIOX_1 */
+ "CON1-P22", /* GPIOX_2 */
+ "CON1-P11", /* GPIOX_3 */
+ "CON1-P13", /* GPIOX_4 */
+ "CON1-P07", /* GPIOX_5 */
+ "CON1-P33", /* GPIOX_6 */
+ "CON1-P15", /* GPIOX_7 */
+ "CON1-P19", /* GPIOX_8 */
+ "CON1-P21", /* GPIOX_9 */
+ "CON1-P24", /* GPIOX_10 */
+ "CON1-P23", /* GPIOX_11 */
+ "CON1-P08", /* GPIOX_12 */
+ "CON1-P10", /* GPIOX_13 */
+ "CON1-P29", /* GPIOX_14 */
+ "CON1-P31", /* GPIOX_15 */
+ "CON1-P26", /* GPIOX_16 */
+ "CON1-P03", /* GPIOX_17 */
+ "CON1-P05", /* GPIOX_18 */
+ "CON1-P32"; /* GPIOX_19 */
+
+ /*
+ * WARNING: The USB Hub on the BPI-M5 needs a reset signal
+ * to be turned high in order to be detected by the USB Controller
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&gpio_ao {
+ gpio-line-names =
+ /* GPIOAO */
+ "DEBUG TX", /* GPIOAO_0 */
+ "DEBUG RX", /* GPIOAO_1 */
+ "SYS_LED2", /* GPIOAO_2 */
+ "UPDATE_KEY", /* GPIOAO_3 */
+ "CON1-P40", /* GPIOAO_4 */
+ "IR_IN", /* GPIOAO_5 */
+ "TF_3V3N_1V8_EN", /* GPIOAO_6 */
+ "CON1-P35", /* GPIOAO_7 */
+ "CON1-P12", /* GPIOAO_8 */
+ "CON1-P37", /* GPIOAO_9 */
+ "CON1-P38", /* GPIOAO_10 */
+ "SYS_LED", /* GPIOAO_11 */
+ /* GPIOE */
+ "VDDEE_PWM", /* GPIOE_0 */
+ "VDDCPU_PWM", /* GPIOE_1 */
+ "TF_PWR_EN"; /* GPIOE_2 */
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&dc_in>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddao_1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ /* TOFIX: SD card is barely usable in SDR modes */
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&tflash_vdd>;
+ vqmmc-supply = <&vddio_c>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmif_c {
+ status = "okay";
+};
+
+&tdmin_a {
+ status = "okay";
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&tdmin_c {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tdmout_c {
+ status = "okay";
+};
+
+&toacodec {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb2_phy0 {
+ phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+ /* Enable the hub which is connected to this port */
+ phy-supply = <&vl_pwr_en>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 06de0b1..f2c0981 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -32,6 +32,19 @@
regulator-boot-on;
regulator-always-on;
};
+
+ sound {
+ model = "G12B-KHADAS-VIM3L";
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 0",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 0",
+ "TDM_A Playback", "TDMOUT_A OUT",
+ "TDMIN_A IN 0", "TDM_A Capture",
+ "TDMIN_A IN 13", "TDM_A Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT";
+ };
};
&cpu0 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 8c327c0..8c30ce6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -23,18 +23,6 @@
};
};
- hub_5v: regulator-hub_5v {
- compatible = "regulator-fixed";
- regulator-name = "HUB_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to the Hub CHIPENABLE, LOW sets low power state */
- gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
sound {
model = "ODROID-C4";
};
@@ -58,8 +46,3 @@
&ir {
linux,rc-map-name = "rc-odroid";
};
-
-&usb2_phy1 {
- /* Enable the hub which is connected to this port */
- phy-supply = <&hub_5v>;
-};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index bf15700..f3f9532 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -44,6 +44,32 @@
};
};
+ /* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */
+ p12v_0: regulator-p12v_0 {
+ compatible = "regulator-fixed";
+ regulator-name = "P12V_0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ /* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */
+ p12v_1: regulator-p12v_1 {
+ compatible = "regulator-fixed";
+ regulator-name = "P12V_1";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
sound {
model = "ODROID-HC4";
};
@@ -90,7 +116,25 @@
status = "disabled";
};
+&spifc {
+ status = "okay";
+ pinctrl-0 = <&nor_pins>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ };
+};
+
&usb {
- phys = <&usb2_phy0>, <&usb2_phy1>;
- phy-names = "usb2-phy0", "usb2-phy1";
+ phys = <&usb2_phy1>;
+ phy-names = "usb2-phy1";
+};
+
+&usb2_phy0 {
+ status = "disabled";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index d14716b..fd0ad85 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -46,8 +46,13 @@
regulator-name = "TF_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_5v>;
- gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+
+ gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>;
gpios-states = <0>;
states = <3300000 0>,
@@ -78,6 +83,8 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&main_12v>;
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
};
vcc_1v8: regulator-vcc_1v8 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index c309517..3d8b1f4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -401,6 +401,16 @@
status = "disabled";
};
+ toacodec: audio-controller@740 {
+ compatible = "amlogic,sm1-toacodec",
+ "amlogic,g12a-toacodec";
+ reg = <0x0 0x740 0x0 0x4>;
+ #sound-dai-cells = <1>;
+ sound-name-prefix = "TOACODEC";
+ resets = <&clkc_audio AUD_RESET_TOACODEC>;
+ status = "disabled";
+ };
+
tohdmitx: audio-controller@744 {
compatible = "amlogic,sm1-tohdmitx",
"amlogic,g12a-tohdmitx";
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 1cc7fdc..8e7a669 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -568,13 +568,13 @@
clocks {
compatible = "arm,scpi-clocks";
- scpi_dvfs: scpi-dvfs {
+ scpi_dvfs: clocks-0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>, <1>, <2>;
clock-output-names = "atlclk", "aplclk","gpuclk";
};
- scpi_clk: scpi-clk {
+ scpi_clk: clocks-1 {
compatible = "arm,scpi-variable-clocks";
#clock-cells = <1>;
clock-indices = <3>;
@@ -582,7 +582,7 @@
};
};
- scpi_devpd: scpi-power-domains {
+ scpi_devpd: power-controller {
compatible = "arm,scpi-power-domains";
num-domains = <2>;
#power-domain-cells = <1>;
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 998e240..11eae3e 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
+ bcm2711-rpi-4-b.dtb \
bcm2837-rpi-3-a-plus.dtb \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
new file mode 100644
index 0000000..b9000f5
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2711-rpi-400.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 8060178..a5a64d1 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -306,7 +306,7 @@
interrupt-names = "nand";
status = "okay";
- nandcs: nandcs@0 {
+ nandcs: nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 2ffb2c9..7b04dfe 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -470,7 +470,7 @@
status = "disabled";
};
- uart0: uart@100000 {
+ uart0: serial@100000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00100000 0x1000>;
@@ -481,7 +481,7 @@
status = "disabled";
};
- uart1: uart@110000 {
+ uart1: serial@110000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00110000 0x1000>;
@@ -492,7 +492,7 @@
status = "disabled";
};
- uart2: uart@120000 {
+ uart2: serial@120000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00120000 0x1000>;
@@ -503,7 +503,7 @@
status = "disabled";
};
- uart3: uart@130000 {
+ uart3: serial@130000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00130000 0x1000>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 773d9ab..cbcc01a 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -391,6 +391,7 @@
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
reg = <0x66>;
samsung,s2mps11-wrstbi-ground;
+ wakeup-source;
s2mps13_osc: clocks {
compatible = "samsung,s2mps13-clk";
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 44890d5..25806c4 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -41,6 +41,7 @@
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
index 6290e2f..e856258 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
@@ -24,6 +24,10 @@
status = "okay";
};
+&pcie1 {
+ status = "okay";
+};
+
&qspi {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 9058cfa..50a72cd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -238,35 +238,35 @@
"fsl,sec-v4.0-rtic";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x60000 0x100 0x60e00 0x18>;
+ reg = <0x60000 0x100>, <0x60e00 0x18>;
ranges = <0x0 0x60100 0x500>;
rtic_a: rtic-a@0 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x100>;
+ reg = <0x00 0x20>, <0x100 0x100>;
};
rtic_b: rtic-b@20 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x100>;
+ reg = <0x20 0x20>, <0x200 0x100>;
};
rtic_c: rtic-c@40 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x100>;
+ reg = <0x40 0x20>, <0x300 0x100>;
};
rtic_d: rtic-d@60 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x400 0x100>;
+ reg = <0x60 0x20>, <0x400 0x100>;
};
};
};
@@ -522,8 +522,8 @@
pcie1: pcie@3400000 {
compatible = "fsl,ls1012a-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 118 0x4>, /* controller interrupt */
<0 117 0x4>; /* PME interrupt */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 9322c6a..d7b5272 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -275,6 +275,10 @@
status = "okay";
};
+&optee {
+ status = "okay";
+};
+
&sai4 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index a30249e..b2e3e5d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -88,7 +88,7 @@
};
firmware {
- optee {
+ optee: optee {
compatible = "linaro,optee-tz";
method = "smc";
status = "disabled";
@@ -617,8 +617,8 @@
pcie1: pcie@3400000 {
compatible = "fsl,ls1028a-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x80 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
@@ -644,8 +644,8 @@
pcie2: pcie@3500000 {
compatible = "fsl,ls1028a-pcie";
- reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
- 0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+ <0x88 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -990,19 +990,19 @@
msi-map = <0 &its 0x17 0xe>;
iommu-map = <0 &smmu 0x17 0xe>;
/* PF0-6 BAR0 - non-prefetchable memory */
- ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000
+ ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000
/* PF0-6 BAR2 - prefetchable memory */
- 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000
+ 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000
/* PF0: VF0-1 BAR0 - non-prefetchable memory */
- 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000
+ 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000
/* PF0: VF0-1 BAR2 - prefetchable memory */
- 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000
+ 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000
/* PF1: VF0-1 BAR0 - non-prefetchable memory */
- 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000
+ 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000
/* PF1: VF0-1 BAR2 - prefetchable memory */
- 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000
+ 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000
/* BAR4 (PF5) - non-prefetchable memory */
- 0x82000000 0x0 0x00000000 0x1 0xfc000000 0x0 0x400000>;
+ 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>;
enetc_port0: ethernet@0,0 {
compatible = "fsl,enetc";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 28c51e5..01b01e3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -869,8 +869,8 @@
pcie1: pcie@3400000 {
compatible = "fsl,ls1043a-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 118 0x4>, /* controller interrupt */
<0 117 0x4>; /* PME interrupt */
@@ -895,8 +895,8 @@
pcie2: pcie@3500000 {
compatible = "fsl,ls1043a-pcie";
- reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
- 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 128 0x4>,
<0 127 0x4>;
@@ -921,8 +921,8 @@
pcie3: pcie@3600000 {
compatible = "fsl,ls1043a-pcie";
- reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
- 0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 162 0x4>,
<0 161 0x4>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 3945830..687fea6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -773,8 +773,8 @@
pcie1: pcie@3400000 {
compatible = "fsl,ls1046a-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
@@ -799,8 +799,8 @@
pcie_ep1: pcie_ep@3400000 {
compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
- reg = <0x00 0x03400000 0x0 0x00100000
- 0x40 0x00000000 0x8 0x00000000>;
+ reg = <0x00 0x03400000 0x0 0x00100000>,
+ <0x40 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <8>;
@@ -809,8 +809,8 @@
pcie2: pcie@3500000 {
compatible = "fsl,ls1046a-pcie";
- reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
- 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
@@ -835,8 +835,8 @@
pcie_ep2: pcie_ep@3500000 {
compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
- reg = <0x00 0x03500000 0x0 0x00100000
- 0x48 0x00000000 0x8 0x00000000>;
+ reg = <0x00 0x03500000 0x0 0x00100000>,
+ <0x48 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <8>;
@@ -845,8 +845,8 @@
pcie3: pcie@3600000 {
compatible = "fsl,ls1046a-pcie";
- reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
- 0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
@@ -871,8 +871,8 @@
pcie_ep3: pcie_ep@3600000 {
compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
- reg = <0x00 0x03600000 0x0 0x00100000
- 0x50 0x00000000 0x8 0x00000000>;
+ reg = <0x00 0x03600000 0x0 0x00100000>,
+ <0x50 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <8>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 8ffbc9f..2fa6cfb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -536,8 +536,8 @@
pcie1: pcie@3400000 {
compatible = "fsl,ls1088a-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
interrupt-names = "aer";
@@ -562,8 +562,8 @@
pcie_ep1: pcie-ep@3400000 {
compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
- reg = <0x00 0x03400000 0x0 0x00100000
- 0x20 0x00000000 0x8 0x00000000>;
+ reg = <0x00 0x03400000 0x0 0x00100000>,
+ <0x20 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <24>;
num-ob-windows = <256>;
@@ -573,8 +573,8 @@
pcie2: pcie@3500000 {
compatible = "fsl,ls1088a-pcie";
- reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
- 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+ <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
interrupt-names = "aer";
@@ -599,8 +599,8 @@
pcie_ep2: pcie-ep@3500000 {
compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
- reg = <0x00 0x03500000 0x0 0x00100000
- 0x28 0x00000000 0x8 0x00000000>;
+ reg = <0x00 0x03500000 0x0 0x00100000>,
+ <0x28 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <6>;
@@ -609,8 +609,8 @@
pcie3: pcie@3600000 {
compatible = "fsl,ls1088a-pcie";
- reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
- 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+ <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
interrupt-names = "aer";
@@ -635,8 +635,8 @@
pcie_ep3: pcie-ep@3600000 {
compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
- reg = <0x00 0x03600000 0x0 0x00100000
- 0x30 0x00000000 0x8 0x00000000>;
+ reg = <0x00 0x03600000 0x0 0x00100000>,
+ <0x30 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <6>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 76ab68d..6f6667b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -120,32 +120,32 @@
};
&pcie1 {
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x10 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x10 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
&pcie2 {
- reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
- 0x12 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+ <0x12 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
&pcie3 {
- reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
- 0x14 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+ <0x14 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
&pcie4 {
- reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
- 0x16 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
+ <0x16 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index da24dc1..c3dc381 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -121,8 +121,8 @@
&pcie1 {
compatible = "fsl,ls2088a-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>;
@@ -130,8 +130,8 @@
&pcie2 {
compatible = "fsl,ls2088a-pcie";
- reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
- 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+ <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>;
@@ -139,8 +139,8 @@
&pcie3 {
compatible = "fsl,ls2088a-pcie";
- reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
- 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+ <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>;
@@ -148,8 +148,8 @@
&pcie4 {
compatible = "fsl,ls2088a-pcie";
- reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
- 0x38 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
+ <0x38 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 135ac82..801ba96 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -929,7 +929,6 @@
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
- bus-num = <0>;
};
esdhc: esdhc@2140000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 0551f6f..c4b1a59 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1089,8 +1089,8 @@
pcie1: pcie@3400000 {
compatible = "fsl,lx2160a-pcie";
- reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
- 0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x80 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1117,8 +1117,8 @@
pcie2: pcie@3500000 {
compatible = "fsl,lx2160a-pcie";
- reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
- 0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+ <0x88 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1145,8 +1145,8 @@
pcie3: pcie@3600000 {
compatible = "fsl,lx2160a-pcie";
- reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
- 0x90 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+ <0x90 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1173,8 +1173,8 @@
pcie4: pcie@3700000 {
compatible = "fsl,lx2160a-pcie";
- reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
- 0x98 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
+ <0x98 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1201,8 +1201,8 @@
pcie5: pcie@3800000 {
compatible = "fsl,lx2160a-pcie";
- reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */
- 0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03800000 0x0 0x00100000>, /* controller registers */
+ <0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1229,8 +1229,8 @@
pcie6: pcie@3900000 {
compatible = "fsl,lx2160a-pcie";
- reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */
- 0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg = <0x00 0x03900000 0x0 0x00100000>, /* controller registers */
+ <0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index e1e81ca..a79f42a 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -77,9 +77,12 @@
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&enet0_lpcg IMX_LPCG_CLK_4>,
<&enet0_lpcg IMX_LPCG_CLK_2>,
- <&enet0_lpcg IMX_LPCG_CLK_1>,
+ <&enet0_lpcg IMX_LPCG_CLK_3>,
<&enet0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+ assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+ <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+ assigned-clock-rates = <250000000>, <125000000>;
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_0>;
@@ -94,9 +97,12 @@
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&enet1_lpcg IMX_LPCG_CLK_4>,
<&enet1_lpcg IMX_LPCG_CLK_2>,
- <&enet1_lpcg IMX_LPCG_CLK_1>,
+ <&enet1_lpcg IMX_LPCG_CLK_3>,
<&enet1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+ assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+ <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>;
+ assigned-clock-rates = <250000000>, <125000000>;
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_1>;
@@ -152,15 +158,19 @@
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
- <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+ <&conn_axi_clk>,
+ <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+ <&conn_ipg_clk>,
+ <&conn_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
- <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
- <IMX_LPCG_CLK_5>;
- clock-output-names = "enet0_ipg_root_clk",
- "enet0_tx_clk",
- "enet0_ahb_clk",
- "enet0_ipg_clk",
- "enet0_ipg_s_clk";
+ <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+ clock-output-names = "enet0_lpcg_timer_clk",
+ "enet0_lpcg_txc_sampling_clk",
+ "enet0_lpcg_ahb_clk",
+ "enet0_lpcg_rgmii_txc_clk",
+ "enet0_lpcg_ipg_clk",
+ "enet0_lpcg_ipg_s_clk";
power-domains = <&pd IMX_SC_R_ENET_0>;
};
@@ -170,15 +180,19 @@
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
- <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+ <&conn_axi_clk>,
+ <&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>,
+ <&conn_ipg_clk>,
+ <&conn_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
- <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
- <IMX_LPCG_CLK_5>;
- clock-output-names = "enet1_ipg_root_clk",
- "enet1_tx_clk",
- "enet1_ahb_clk",
- "enet1_ipg_clk",
- "enet1_ipg_s_clk";
+ <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+ <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+ clock-output-names = "enet1_lpcg_timer_clk",
+ "enet1_lpcg_txc_sampling_clk",
+ "enet1_lpcg_ahb_clk",
+ "enet1_lpcg_rgmii_txc_clk",
+ "enet1_lpcg_ipg_clk",
+ "enet1_lpcg_ipg_s_clk";
power-domains = <&pd IMX_SC_R_ENET_1>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 6518f08..e033d02 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -314,6 +314,7 @@
srp-disable;
adp-disable;
usb-role-switch;
+ disable-over-current;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
new file mode 100644
index 0000000..5a1e9df
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -0,0 +1,1019 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+ model = "Gateworks Venice GW7901 i.MX8MM board";
+ compatible = "gw,imx8mm-gw7901", "fsl,imx8mm";
+
+ aliases {
+ ethernet0 = &fec1;
+ ethernet1 = &lan1;
+ ethernet2 = &lan2;
+ ethernet3 = &lan3;
+ ethernet4 = &lan4;
+ usb0 = &usbotg1;
+ usb1 = &usbotg2;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key_erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
+ led-controller {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ label = "led01_red";
+ gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "led01_grn";
+ gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ label = "led02_red";
+ gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-3 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "led02_grn";
+ gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-4 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ label = "led03_red";
+ gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-5 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "led03_grn";
+ gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-6 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ label = "led04_red";
+ gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-7 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "led04_grn";
+ gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-8 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ label = "led05_red";
+ gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-9 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "led05_grn";
+ gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-a {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ label = "led06_red";
+ gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led-b {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "led06_grn";
+ gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator-ioexp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_ioexp>;
+ compatible = "regulator-fixed";
+ regulator-name = "ioexp";
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator-isouart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_isouart>;
+ compatible = "regulator-fixed";
+ regulator-name = "iso_uart";
+ gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <100>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb2_vbus: regulator-usb2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb2>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_usb2_vbus";
+ gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_wifi: regulator-wifi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wl>;
+ compatible = "regulator-fixed";
+ regulator-name = "wifi";
+ gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ status = "okay";
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ local-mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ pinctrl-0 = <&pinctrl_gsc>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vin_aux1";
+ gw,voltage-divider-ohms = <22100 1000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vin_aux2";
+ gw,voltage-divider-ohms = <22100 1000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_0p95";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_soc";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_arm";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p8";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_1p2";
+ };
+
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_dram";
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
+ regulators {
+ /* vdd_soc: 0.805-0.900V (typ=0.8V) */
+ BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ /* vdd_arm: 0.805-1.0V (typ=0.9V) */
+ BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+ BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_3p3 */
+ BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_1p8 */
+ BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_dram */
+ BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* nvcc_snvs_1p8 */
+ LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd_snvs_0p8 */
+ LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdda_1p8 */
+ LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ leds_gpio: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ switch: switch@5f {
+ compatible = "microchip,ksz9897";
+ reg = <0x5f>;
+ pinctrl-0 = <&pinctrl_ksz>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ phy-mode = "rgmii-id";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lan1: port@0 {
+ reg = <0>;
+ label = "lan1";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ lan2: port@1 {
+ reg = <1>;
+ label = "lan2";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ lan3: port@2 {
+ reg = <2>;
+ label = "lan3";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ lan4: port@3 {
+ reg = <3>;
+ label = "lan4";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&fec1>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ crypto@60 {
+ compatible = "atmel,atecc508a";
+ reg = <0x60>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+ rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+ cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
+ cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wifi>;
+ status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */
+ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIG1_OUT */
+ MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x40000041 /* SIM2DET# */
+ MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x40000041 /* SIM1DET# */
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* SIM2SEL */
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* IRQ# */
+ MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* RST# */
+ >;
+ };
+
+ pinctrl_gsc: gscgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x159
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_ksz: kszgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x41
+ MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x41 /* RST# */
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41
+ >;
+ };
+
+ pinctrl_reg_isouart: regisouartgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041
+ >;
+ };
+
+ pinctrl_reg_ioexp: regioexpgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041
+ >;
+ };
+
+ pinctrl_reg_wl: regwlgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000041
+ >;
+ };
+
+ pinctrl_reg_usb2: regusb1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x41
+ MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x41
+ >;
+ };
+
+ pinctrl_spi1: spi1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x140
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x140
+ MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x140
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x140
+ MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x140
+ >;
+ };
+
+ pinctrl_uart1_gpio: uart1gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000041 /* RS422# */
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000041 /* RS485# */
+ MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x40000041 /* RS232# */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140
+ MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140
+ >;
+ };
+
+ pinctrl_uart3_gpio: uart3gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */
+ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */
+ MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x140
+ MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x140
+ >;
+ };
+
+ pinctrl_uart4_gpio: uart4gpiogrp {
+ fsl,pins = <
+
+ MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x40000041 /* RS232# */
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000041 /* RS422# */
+ MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* RS485# */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
+
+&cpu_alert0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+};
+
+&cpu_crit0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index a27e02b..e7648c3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -261,6 +261,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
+ dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
nvmem-cells = <&imx8mm_uid>;
nvmem-cell-names = "soc_unique_id";
@@ -271,117 +272,125 @@
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
- sai1: sai@30010000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30010000 0x10000>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
- <&clk IMX8MM_CLK_SAI1_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ spba2: spba-bus@30000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000000 0x100000>;
+ ranges;
- sai2: sai@30020000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30020000 0x10000>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
- <&clk IMX8MM_CLK_SAI2_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai1: sai@30010000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30010000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+ <&clk IMX8MM_CLK_SAI1_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai3: sai@30030000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30030000 0x10000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
- <&clk IMX8MM_CLK_SAI3_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai2: sai@30020000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30020000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+ <&clk IMX8MM_CLK_SAI2_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai5: sai@30050000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30050000 0x10000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
- <&clk IMX8MM_CLK_SAI5_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai3: sai@30030000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30030000 0x10000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+ <&clk IMX8MM_CLK_SAI3_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- sai6: sai@30060000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
- reg = <0x30060000 0x10000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
- <&clk IMX8MM_CLK_SAI6_ROOT>,
- <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
- clock-names = "bus", "mclk1", "mclk2", "mclk3";
- dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ sai5: sai@30050000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30050000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+ <&clk IMX8MM_CLK_SAI5_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- micfil: audio-controller@30080000 {
- compatible = "fsl,imx8mm-micfil";
- reg = <0x30080000 0x10000>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_PDM_IPG>,
- <&clk IMX8MM_CLK_PDM_ROOT>,
- <&clk IMX8MM_AUDIO_PLL1_OUT>,
- <&clk IMX8MM_AUDIO_PLL2_OUT>,
- <&clk IMX8MM_CLK_EXT3>;
- clock-names = "ipg_clk", "ipg_clk_app",
- "pll8k", "pll11k", "clkext3";
- dmas = <&sdma2 24 25 0x80000000>;
- dma-names = "rx";
- status = "disabled";
- };
+ sai6: sai@30060000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30060000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+ <&clk IMX8MM_CLK_SAI6_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- spdif1: spdif@30090000 {
- compatible = "fsl,imx35-spdif";
- reg = <0x30090000 0x10000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
- <&clk IMX8MM_CLK_24M>, /* rxtx0 */
- <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
- <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
- <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
- <&clk IMX8MM_CLK_DUMMY>; /* spba */
- clock-names = "core", "rxtx0",
- "rxtx1", "rxtx2",
- "rxtx3", "rxtx4",
- "rxtx5", "rxtx6",
- "rxtx7", "spba";
- dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
- dma-names = "rx", "tx";
- status = "disabled";
+ micfil: audio-controller@30080000 {
+ compatible = "fsl,imx8mm-micfil";
+ reg = <0x30080000 0x10000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+ <&clk IMX8MM_CLK_PDM_ROOT>,
+ <&clk IMX8MM_AUDIO_PLL1_OUT>,
+ <&clk IMX8MM_AUDIO_PLL2_OUT>,
+ <&clk IMX8MM_CLK_EXT3>;
+ clock-names = "ipg_clk", "ipg_clk_app",
+ "pll8k", "pll11k", "clkext3";
+ dmas = <&sdma2 24 25 0x80000000>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ spdif1: spdif@30090000 {
+ compatible = "fsl,imx35-spdif";
+ reg = <0x30090000 0x10000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+ <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+ <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+ <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+ <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+ <&clk IMX8MM_CLK_DUMMY>; /* spba */
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "spba";
+ dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
};
gpio1: gpio@30200000 {
@@ -670,80 +679,88 @@
ranges = <0x30800000 0x30800000 0x400000>,
<0x8000000 0x8000000 0x10000000>;
- ecspi1: spi@30820000 {
- compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ spba1: spba-bus@30800000 {
+ compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30820000 0x10000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
- <&clk IMX8MM_CLK_ECSPI1_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ #size-cells = <1>;
+ reg = <0x30800000 0x100000>;
+ ranges;
- ecspi2: spi@30830000 {
- compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30830000 0x10000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
- <&clk IMX8MM_CLK_ECSPI2_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi1: spi@30820000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- ecspi3: spi@30840000 {
- compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30840000 0x10000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
- <&clk IMX8MM_CLK_ECSPI3_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi2: spi@30830000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart1: serial@30860000 {
- compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
- reg = <0x30860000 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
- <&clk IMX8MM_CLK_UART1_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi3: spi@30840000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart3: serial@30880000 {
- compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
- reg = <0x30880000 0x10000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
- <&clk IMX8MM_CLK_UART3_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ uart1: serial@30860000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+ <&clk IMX8MM_CLK_UART1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart2: serial@30890000 {
- compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
- reg = <0x30890000 0x10000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
- <&clk IMX8MM_CLK_UART2_ROOT>;
- clock-names = "ipg", "per";
- status = "disabled";
+ uart3: serial@30880000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+ <&clk IMX8MM_CLK_UART3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@30890000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+ <&clk IMX8MM_CLK_UART2_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
};
crypto: crypto@30900000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index c35eeaf..54eaf3d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -120,6 +120,9 @@
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
regulators {
buck1_reg: BUCK1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index a0dddba..85e65f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -193,6 +193,7 @@
srp-disable;
adp-disable;
usb-role-switch;
+ disable-over-current;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 4dac4da..d4231e0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -245,6 +245,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
+ dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
nvmem-cells = <&imx8mn_uid>;
nvmem-cell-names = "soc_unique_id";
@@ -255,7 +256,7 @@
#size-cells = <1>;
ranges;
- spba: spba-bus@30000000 {
+ spba2: spba-bus@30000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -681,80 +682,88 @@
#size-cells = <1>;
ranges;
- ecspi1: spi@30820000 {
- compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+ spba1: spba-bus@30800000 {
+ compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30820000 0x10000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
- <&clk IMX8MN_CLK_ECSPI1_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ #size-cells = <1>;
+ reg = <0x30800000 0x100000>;
+ ranges;
- ecspi2: spi@30830000 {
- compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30830000 0x10000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
- <&clk IMX8MN_CLK_ECSPI2_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi1: spi@30820000 {
+ compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
+ <&clk IMX8MN_CLK_ECSPI1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- ecspi3: spi@30840000 {
- compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x30840000 0x10000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
- <&clk IMX8MN_CLK_ECSPI3_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi2: spi@30830000 {
+ compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
+ <&clk IMX8MN_CLK_ECSPI2_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart1: serial@30860000 {
- compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
- reg = <0x30860000 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
- <&clk IMX8MN_CLK_UART1_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ ecspi3: spi@30840000 {
+ compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
+ <&clk IMX8MN_CLK_ECSPI3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart3: serial@30880000 {
- compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
- reg = <0x30880000 0x10000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
- <&clk IMX8MN_CLK_UART3_ROOT>;
- clock-names = "ipg", "per";
- dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
+ uart1: serial@30860000 {
+ compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
+ <&clk IMX8MN_CLK_UART1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
- uart2: serial@30890000 {
- compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
- reg = <0x30890000 0x10000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
- <&clk IMX8MN_CLK_UART2_ROOT>;
- clock-names = "ipg", "per";
- status = "disabled";
+ uart3: serial@30880000 {
+ compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
+ <&clk IMX8MN_CLK_UART3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@30890000 {
+ compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
+ <&clk IMX8MN_CLK_UART2_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
};
crypto: crypto@30900000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 2c28e58..7b99fad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -81,6 +81,26 @@
status = "disabled";/* can2 pin conflict with pdm */
};
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ eee-broken-1000t;
+ };
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
@@ -104,6 +124,92 @@
};
};
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1025000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1045000>;
+ regulator-max-microvolt = <1155000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -177,6 +283,26 @@
};
&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19
+ >;
+ };
+
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
@@ -229,6 +355,13 @@
>;
};
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ >;
+ };
+
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
@@ -236,6 +369,12 @@
>;
};
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0
+ >;
+ };
+
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index f3965ec..aa78e0d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -65,6 +65,20 @@
};
};
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi0>;
+ status = "okay";
+
+ som_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
@@ -217,6 +231,17 @@
>;
};
+ pinctrl_flexspi0: flexspi0grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2
+ MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82
+ MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82
+ MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82
+ MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82
+ MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index c2d51a4..9f7c7f5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -37,6 +37,7 @@
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
+ spi0 = &flexspi;
};
cpus {
@@ -407,7 +408,6 @@
<&clk IMX8MP_CLK_GIC>,
<&clk IMX8MP_CLK_AUDIO_AHB>,
<&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
- <&clk IMX8MP_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MP_AUDIO_PLL1>,
<&clk IMX8MP_AUDIO_PLL2>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
@@ -423,7 +423,6 @@
<500000000>,
<400000000>,
<800000000>,
- <400000000>,
<393216000>,
<361267200>;
};
@@ -761,6 +760,21 @@
status = "disabled";
};
+ flexspi: spi@30bb0000 {
+ compatible = "nxp,imx8mp-fspi";
+ reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_QSPI_ROOT>,
+ <&clk IMX8MP_CLK_QSPI_ROOT>;
+ clock-names = "fspi", "fspi_en";
+ assigned-clock-rates = <80000000>;
+ assigned-clocks = <&clk IMX8MP_CLK_QSPI>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 85b0452..4d2035e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -318,6 +318,7 @@
<&clk IMX8MQ_CLK_PCIE1_PHY>,
<&pcie0_refclk>;
clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ vph-supply = <&vgen5_reg>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 81d2692..f70fb32 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -34,6 +34,30 @@
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ ddc-i2c-bus = <&ddc_i2c_bus>;
+ label = "hdmi";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <<8912_out>;
+ };
+ };
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_vref_0v9: regulator-vref-0v9 {
compatible = "regulator-fixed";
regulator-name = "vref-0v9";
@@ -70,6 +94,9 @@
};
};
+&dphy {
+ status = "okay";
+};
&fec1 {
pinctrl-names = "default";
@@ -91,6 +118,15 @@
};
};
+/* Release reset of the USB Host HUB */
+&gpio1 {
+ usb-host-reset-hog {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -174,6 +210,98 @@
};
};
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ pca9546: i2cmux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c4@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+
+ hdmi-bridge@48 {
+ compatible = "lontium,lt8912b";
+ reg = <0x48> ;
+ reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_out_in: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lt8912_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+ };
+
+ ddc_i2c_bus: i2c4@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ };
+
+ i2c4@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+
+ max7323: gpio-expander@68 {
+ compatible = "maxim,max7323";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_max7323>;
+ gpio-controller;
+ reg = <0x68>;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&mipi_dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&hdmi_out_in>;
+ };
+ };
+ };
+};
+
&uart1 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -190,6 +318,29 @@
status = "okay";
};
+&usb_dwc3_0 {
+ dr_mode = "otg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3_0>;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_usb_otg_vbus>;
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb3_phy1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3_1>;
+ status = "okay";
+};
+
&usdhc1 {
assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
assigned-clock-rates = <400000000>;
@@ -321,6 +472,19 @@
>;
};
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_max7323: max7323grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19
+ >;
+ };
+
pinctrl_reg_arm_dram: reg-arm-dramgrp {
fsl,pins = <
MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16
@@ -339,6 +503,12 @@
>;
};
+ pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x16
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45
@@ -353,6 +523,18 @@
>;
};
+ pinctrl_usb3_0: usb3-0grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x16
+ >;
+ };
+
+ pinctrl_usb3_1: usb3-1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 17c449e..91df9c5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1383,6 +1383,14 @@
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
reset-names = "pciephy", "apps", "turnoff";
+ assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
+ <&clk IMX8MQ_CLK_PCIE1_PHY>,
+ <&clk IMX8MQ_CLK_PCIE1_AUX>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+ <&clk IMX8MQ_SYS2_PLL_100M>,
+ <&clk IMX8MQ_SYS1_PLL_80M>;
+ assigned-clock-rates = <250000000>, <100000000>,
+ <10000000>;
status = "disabled";
};
@@ -1413,6 +1421,14 @@
<&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
<&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
reset-names = "pciephy", "apps", "turnoff";
+ assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+ <&clk IMX8MQ_CLK_PCIE2_PHY>,
+ <&clk IMX8MQ_CLK_PCIE2_AUX>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+ <&clk IMX8MQ_SYS2_PLL_100M>,
+ <&clk IMX8MQ_SYS1_PLL_80M>;
+ assigned-clock-rates = <250000000>, <100000000>,
+ <10000000>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
index d607f2f6..79a55a0f 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
@@ -3,7 +3,7 @@
/*
* dtsi for Hisilicon Hi3660 Coresight
*
- * Copyright (C) 2016-2018 Hisilicon Ltd.
+ * Copyright (C) 2016-2018 HiSilicon Ltd.
*
* Author: Wanglai Shi <shiwanglai@hisilicon.com>
*
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 963300e..f68580d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -2,7 +2,7 @@
/*
* dts file for Hisilicon HiKey960 Development Board
*
- * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2016, HiSilicon Ltd.
*
*/
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index cab89dc..f1ec87c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -2,7 +2,7 @@
/*
* dts file for Hisilicon Hi3660 SoC
*
- * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2016, HiSilicon Ltd.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 7f9f988..d8abf44 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -2,7 +2,7 @@
/*
* dts file for Hisilicon HiKey970 Development Board
*
- * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2016, HiSilicon Ltd.
* Copyright (C) 2018, Linaro Ltd.
*
*/
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 8830795..20698cf 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -2,7 +2,7 @@
/*
* dts file for Hisilicon Hi3670 SoC
*
- * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2016, HiSilicon Ltd.
* Copyright (C) 2018, Linaro Ltd.
*/
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
index 7b3010f..3f387f4 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -2,7 +2,7 @@
/*
* dtsi file for Hisilicon Hi6220 coresight
*
- * Copyright (C) 2017 Hisilicon Ltd.
+ * Copyright (C) 2017 HiSilicon Ltd.
*
* Author: Pengcheng Li <lipengcheng8@huawei.com>
* Leo Yan <leo.yan@linaro.org>
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 91d0867..3df2afb 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -2,7 +2,7 @@
/*
* dts file for Hisilicon HiKey Development Board
*
- * Copyright (C) 2015, Hisilicon Ltd.
+ * Copyright (C) 2015, HiSilicon Ltd.
*
*/
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index d426c6c..dde9371 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -2,7 +2,7 @@
/*
* dts file for Hisilicon Hi6220 SoC
*
- * Copyright (C) 2015, Hisilicon Ltd.
+ * Copyright (C) 2015, HiSilicon Ltd.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index 369b69b..40f3e00 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -2,7 +2,7 @@
/**
* dts file for Hisilicon D02 Development Board
*
- * Copyright (C) 2014,2015 Hisilicon Ltd.
+ * Copyright (C) 2014,2015 HiSilicon Ltd.
*/
/dts-v1/;
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index 4aed8d4..7b2abd1 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -2,7 +2,7 @@
/**
* dts file for Hisilicon D02 Development Board
*
- * Copyright (C) 2014,2015 Hisilicon Ltd.
+ * Copyright (C) 2014,2015 HiSilicon Ltd.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
index 9f4a930..35af5d3 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -2,7 +2,7 @@
/**
* dts file for Hisilicon D03 Development Board
*
- * Copyright (C) 2016 Hisilicon Ltd.
+ * Copyright (C) 2016 HiSilicon Ltd.
*/
/dts-v1/;
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index 7deca5f..70d7732 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -2,7 +2,7 @@
/**
* dts file for Hisilicon D03 Development Board
*
- * Copyright (C) 2016 Hisilicon Ltd.
+ * Copyright (C) 2016 HiSilicon Ltd.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
index 81a2312..c3df678 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
@@ -2,7 +2,7 @@
/**
* dts file for Hisilicon D05 Development Board
*
- * Copyright (C) 2016 Hisilicon Ltd.
+ * Copyright (C) 2016 HiSilicon Ltd.
*/
/dts-v1/;
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 2172d80..6baf6a6 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -2,7 +2,7 @@
/**
* dts file for Hisilicon D05 Development Board
*
- * Copyright (C) 2016 Hisilicon Ltd.
+ * Copyright (C) 2016 HiSilicon Ltd.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 53e817c..ce2bcdd 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -109,10 +109,8 @@
};
firmware {
- turris-mox-rwtm {
- compatible = "cznic,turris-mox-rwtm";
- mboxes = <&rwtm 0>;
- status = "okay";
+ armada-3700-rwtm {
+ compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
};
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 6ffbb09..5db81a4 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -504,4 +504,12 @@
};
};
};
+
+ firmware {
+ armada-3700-rwtm {
+ compatible = "marvell,armada-3700-rwtm-firmware";
+ mboxes = <&rwtm 0>;
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
index d9bbbfa..4a23f65 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
@@ -29,6 +29,7 @@
};
&ap_sdhci0 {
- compatible = "marvell,armada-ap807-sdhci";
+ compatible = "marvell,armada-ap807-sdhci",
+ "marvell,armada-ap806-sdhci"; /* Backward compatibility */
};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts
index 2c2af00..97586095 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dts
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts
@@ -260,7 +260,7 @@
};
partition@200000 {
label = "Linux";
- reg = <0x200000 0xd00000>;
+ reg = <0x200000 0xe00000>;
};
partition@1000000 {
label = "Filesystem";
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index a1c50ad..4f68ebe 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -13,8 +13,16 @@
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-burnet.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-damu.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku6.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
index 1c5639e..9029051 100644
--- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/clock/mt8167-clk.h>
#include <dt-bindings/memory/mt8167-larb-port.h>
+#include <dt-bindings/power/mt8167-power.h>
#include "mt8167-pinfunc.h"
@@ -34,6 +35,73 @@
#clock-cells = <1>;
};
+ scpsys: syscon@10006000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0 0x10006000 0 0x1000>;
+ #power-domain-cells = <1>;
+
+ spm: power-controller {
+ compatible = "mediatek,mt8167-power-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ /* power domains of the SoC */
+ power-domain@MT8167_POWER_DOMAIN_MM {
+ reg = <MT8167_POWER_DOMAIN_MM>;
+ clocks = <&topckgen CLK_TOP_SMI_MM>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+
+ power-domain@MT8167_POWER_DOMAIN_VDEC {
+ reg = <MT8167_POWER_DOMAIN_VDEC>;
+ clocks = <&topckgen CLK_TOP_SMI_MM>,
+ <&topckgen CLK_TOP_RG_VDEC>;
+ clock-names = "mm", "vdec";
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8167_POWER_DOMAIN_ISP {
+ reg = <MT8167_POWER_DOMAIN_ISP>;
+ clocks = <&topckgen CLK_TOP_SMI_MM>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ };
+
+ power-domain@MT8167_POWER_DOMAIN_MFG_ASYNC {
+ reg = <MT8167_POWER_DOMAIN_MFG_ASYNC>;
+ clocks = <&topckgen CLK_TOP_RG_AXI_MFG>,
+ <&topckgen CLK_TOP_RG_SLOW_MFG>;
+ clock-names = "axi_mfg", "mfg";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+ mediatek,infracfg = <&infracfg>;
+
+ power-domain@MT8167_POWER_DOMAIN_MFG_2D {
+ reg = <MT8167_POWER_DOMAIN_MFG_2D>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8167_POWER_DOMAIN_MFG {
+ reg = <MT8167_POWER_DOMAIN_MFG>;
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ };
+ };
+
+ power-domain@MT8167_POWER_DOMAIN_CONN {
+ reg = <MT8167_POWER_DOMAIN_CONN>;
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ };
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt8167-imgsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
@@ -57,5 +125,58 @@
#interrupt-cells = <2>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ mmsys: mmsys@14000000 {
+ compatible = "mediatek,mt8167-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ smi_common: smi@14017000 {
+ compatible = "mediatek,mt8167-smi-common";
+ reg = <0 0x14017000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_SMI_COMMON>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
+ };
+
+ larb0: larb@14016000 {
+ compatible = "mediatek,mt8167-smi-larb";
+ reg = <0 0x14016000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
+ };
+
+ larb1: larb@15001000 {
+ compatible = "mediatek,mt8167-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&imgsys CLK_IMG_LARB1_SMI>,
+ <&imgsys CLK_IMG_LARB1_SMI>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8167_POWER_DOMAIN_ISP>;
+ };
+
+ larb2: larb@16010000 {
+ compatible = "mediatek,mt8167-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&vdecsys CLK_VDEC_CKEN>,
+ <&vdecsys CLK_VDEC_LARB1_CKEN>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8167_POWER_DOMAIN_VDEC>;
+ };
+
+ iommu: m4u@10203000 {
+ compatible = "mediatek,mt8167-m4u";
+ reg = <0 0x10203000 0 0x1000>;
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_LOW>;
+ #iommu-cells = <1>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 003a565..22f271b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1459,14 +1459,11 @@
clock-names = "apb", "smi";
};
- vcodec_enc: vcodec@18002000 {
+ vcodec_enc_avc: vcodec@18002000 {
compatible = "mediatek,mt8173-vcodec-enc";
- reg = <0 0x18002000 0 0x1000>, /* VENC_SYS */
- <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
- interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb3>,
- <&larb5>;
+ reg = <0 0x18002000 0 0x1000>; /* VENC_SYS */
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+ mediatek,larb = <&larb3>;
iommus = <&iommu M4U_PORT_VENC_RCPU>,
<&iommu M4U_PORT_VENC_REC>,
<&iommu M4U_PORT_VENC_BSDMA>,
@@ -1477,29 +1474,12 @@
<&iommu M4U_PORT_VENC_REF_LUMA>,
<&iommu M4U_PORT_VENC_REF_CHROMA>,
<&iommu M4U_PORT_VENC_NBM_RDMA>,
- <&iommu M4U_PORT_VENC_NBM_WDMA>,
- <&iommu M4U_PORT_VENC_RCPU_SET2>,
- <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
- <&iommu M4U_PORT_VENC_BSDMA_SET2>,
- <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
- <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
- <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
- <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
- <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
- <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+ <&iommu M4U_PORT_VENC_NBM_WDMA>;
mediatek,vpu = <&vpu>;
- clocks = <&topckgen CLK_TOP_VENCPLL_D2>,
- <&topckgen CLK_TOP_VENC_SEL>,
- <&topckgen CLK_TOP_UNIVPLL1_D2>,
- <&topckgen CLK_TOP_VENC_LT_SEL>;
- clock-names = "venc_sel_src",
- "venc_sel",
- "venc_lt_sel_src",
- "venc_lt_sel";
- assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
- <&topckgen CLK_TOP_VENC_LT_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>,
- <&topckgen CLK_TOP_VCODECPLL_370P5>;
+ clocks = <&topckgen CLK_TOP_VENC_SEL>;
+ clock-names = "venc_sel";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
};
jpegdec: jpegdec@18004000 {
@@ -1531,5 +1511,27 @@
<&vencltsys CLK_VENCLT_CKE0>;
clock-names = "apb", "smi";
};
+
+ vcodec_enc_vp8: vcodec@19002000 {
+ compatible = "mediatek,mt8173-vcodec-enc-vp8";
+ reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+ iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
+ <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+ <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+ <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+ <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+ <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+ <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+ <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+ <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+ mediatek,larb = <&larb5>;
+ mediatek,vpu = <&vpu>;
+ clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "venc_lt_sel";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+ assigned-clock-parents =
+ <&topckgen CLK_TOP_VCODECPLL_370P5>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index edff1e0..7bc0a6a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -42,6 +42,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&mt6358_vgpu_reg>;
+ sram-supply = <&mt6358_vsram_gpu_reg>;
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins_0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
new file mode 100644
index 0000000..a8d6f32
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+/ {
+ model = "Google burnet board";
+ compatible = "google,burnet", "mediatek,mt8183";
+};
+
+&mt6358codec {
+ mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&i2c0 {
+ touchscreen@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+ post-power-on-delay-ms = <200>;
+ hid-descr-addr = <0x0020>;
+ };
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
new file mode 100644
index 0000000..ef6257c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+
+/ {
+ model = "Google fennel sku1 board";
+ compatible = "google,fennel-sku1", "google,fennel", "mediatek,mt8183";
+
+ pwmleds {
+ compatible = "pwm-leds";
+ keyboard_backlight: keyboard-backlight {
+ label = "cros_ec::kbd_backlight";
+ pwms = <&cros_ec_pwm 0>;
+ max-brightness = <1023>;
+ };
+ };
+};
+
+&cros_ec_pwm {
+ status = "okay";
+};
+
+&touchscreen {
+ status = "okay";
+
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ interrupt-parent = <&pio>;
+ interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+
+ post-power-on-delay-ms = <10>;
+ hid-descr-addr = <0x0001>;
+};
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_FENNEL";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
new file mode 100644
index 0000000..899c2e4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+
+/ {
+ model = "Google fennel sku6 board";
+ compatible = "google,fennel-sku6", "google,fennel", "mediatek,mt8183";
+};
+
+&touchscreen {
+ status = "okay";
+
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ interrupt-parent = <&pio>;
+ interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+
+ post-power-on-delay-ms = <10>;
+ hid-descr-addr = <0x0001>;
+};
+
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_FENNEL";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
new file mode 100644
index 0000000..bbe6c33
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+&mt6358codec {
+ mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&i2c2 {
+ trackpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pins>;
+
+ interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+ wakeup-source;
+ };
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
new file mode 100644
index 0000000..e8c41f6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+
+/ {
+ model = "Google fennel14 sku0 board";
+ compatible = "google,fennel-sku0", "google,fennel", "mediatek,mt8183";
+};
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
new file mode 100644
index 0000000..b3f46c1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+/ {
+ model = "Google kappa board";
+ compatible = "google,kappa", "mediatek,mt8183";
+};
+
+&mt6358codec {
+ mediatek,dmic-mode = <1>; /* one-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
new file mode 100644
index 0000000..6f1aa69
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-juniper.dtsi"
+
+/ {
+ model = "Google kenzo sku17 board";
+ compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
new file mode 100644
index 0000000..281265f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-willow.dtsi"
+
+/ {
+ model = "Google willow board sku0";
+ compatible = "google,willow-sku0", "google,willow", "mediatek,mt8183";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
new file mode 100644
index 0000000..22e56bd
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-willow.dtsi"
+
+/ {
+ model = "Google willow board sku1";
+ compatible = "google,willow-sku1", "google,willow", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
new file mode 100644
index 0000000..76d3354
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+&i2c2 {
+ trackpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ hid-descr-addr = <0x20>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_pins>;
+
+ interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+ wakeup-source;
+ };
+};
+
+&qca_wifi {
+ qcom,ath10k-calibration-variant = "GO_JUNIPER";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 4049dff..d8826c8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -92,6 +92,14 @@
};
};
+&cros_ec {
+ cros_ec_pwm: ec-pwm {
+ compatible = "google,cros-ec-pwm";
+ #pwm-cells = <1>;
+ status = "disabled";
+ };
+};
+
&dsi0 {
status = "okay";
/delete-node/panel@0;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index b442e38..28966a6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -88,11 +88,13 @@
pinctrl-0 = <&i2c2_pins>;
status = "okay";
clock-frequency = <400000>;
+ vbus-supply = <&mt6358_vcamio_reg>;
eeprom@58 {
compatible = "atmel,24c32";
reg = <0x58>;
pagesize = <32>;
+ vcc-supply = <&mt6358_vcama2_reg>;
};
};
@@ -101,11 +103,13 @@
pinctrl-0 = <&i2c4_pins>;
status = "okay";
clock-frequency = <400000>;
+ vbus-supply = <&mt6358_vcn18_reg>;
eeprom@54 {
compatible = "atmel,24c32";
reg = <0x54>;
pagesize = <32>;
+ vcc-supply = <&mt6358_vcn18_reg>;
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 2f5234a..3aa7940 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -62,11 +62,13 @@
pinctrl-0 = <&i2c2_pins>;
status = "okay";
clock-frequency = <400000>;
+ vbus-supply = <&mt6358_vcamio_reg>;
eeprom@58 {
compatible = "atmel,24c64";
reg = <0x58>;
pagesize = <32>;
+ vcc-supply = <&mt6358_vcamio_reg>;
};
};
@@ -75,11 +77,13 @@
pinctrl-0 = <&i2c4_pins>;
status = "okay";
clock-frequency = <400000>;
+ vbus-supply = <&mt6358_vcn18_reg>;
eeprom@54 {
compatible = "atmel,24c64";
reg = <0x54>;
pagesize = <32>;
+ vcc-supply = <&mt6358_vcn18_reg>;
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index fbc471c..30c183c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -71,11 +71,13 @@
pinctrl-0 = <&i2c2_pins>;
status = "okay";
clock-frequency = <400000>;
+ vbus-supply = <&mt6358_vcamio_reg>;
eeprom@58 {
compatible = "atmel,24c32";
reg = <0x58>;
pagesize = <32>;
+ vcc-supply = <&mt6358_vcama2_reg>;
};
};
@@ -84,11 +86,13 @@
pinctrl-0 = <&i2c4_pins>;
status = "okay";
clock-frequency = <400000>;
+ vbus-supply = <&mt6358_vcn18_reg>;
eeprom@54 {
compatible = "atmel,24c32";
reg = <0x54>;
pagesize = <32>;
+ vcc-supply = <&mt6358_vcn18_reg>;
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ff56bcf..ae549d5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -279,6 +279,11 @@
};
};
+&gpu {
+ mali-supply = <&mt6358_vgpu_reg>;
+ sram-supply = <&mt6358_vsram_gpu_reg>;
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@@ -816,6 +821,10 @@
compatible = "google,extcon-usbc-cros-ec";
google,usb-port-id = <0>;
};
+
+ cbas {
+ compatible = "google,cros-cbas";
+ };
};
};
@@ -847,6 +856,20 @@
status = "okay";
};
+&thermal_zones {
+ tboard1 {
+ polling-delay = <1000>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&tboard_thermistor1>;
+ };
+
+ tboard2 {
+ polling-delay = <1000>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&tboard_thermistor2>;
+ };
+};
+
&u3phy {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index 0aff5eb..ee91282 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -68,6 +68,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&mt6358_vgpu_reg>;
+ sram-supply = <&mt6358_vsram_gpu_reg>;
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins_0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index c5e822b..f90df64 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -197,6 +197,91 @@
};
};
+ gpu_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <625000>, <850000>;
+ };
+
+ opp-320000000 {
+ opp-hz = /bits/ 64 <320000000>;
+ opp-microvolt = <631250>, <850000>;
+ };
+
+ opp-340000000 {
+ opp-hz = /bits/ 64 <340000000>;
+ opp-microvolt = <637500>, <850000>;
+ };
+
+ opp-360000000 {
+ opp-hz = /bits/ 64 <360000000>;
+ opp-microvolt = <643750>, <850000>;
+ };
+
+ opp-380000000 {
+ opp-hz = /bits/ 64 <380000000>;
+ opp-microvolt = <650000>, <850000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <656250>, <850000>;
+ };
+
+ opp-420000000 {
+ opp-hz = /bits/ 64 <420000000>;
+ opp-microvolt = <662500>, <850000>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ opp-microvolt = <675000>, <850000>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <687500>, <850000>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ opp-microvolt = <700000>, <850000>;
+ };
+
+ opp-580000000 {
+ opp-hz = /bits/ 64 <580000000>;
+ opp-microvolt = <712500>, <850000>;
+ };
+
+ opp-620000000 {
+ opp-hz = /bits/ 64 <620000000>;
+ opp-microvolt = <725000>, <850000>;
+ };
+
+ opp-653000000 {
+ opp-hz = /bits/ 64 <653000000>;
+ opp-microvolt = <743750>, <850000>;
+ };
+
+ opp-698000000 {
+ opp-hz = /bits/ 64 <698000000>;
+ opp-microvolt = <768750>, <868750>;
+ };
+
+ opp-743000000 {
+ opp-hz = /bits/ 64 <743000000>;
+ opp-microvolt = <793750>, <893750>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <825000>, <925000>;
+ };
+ };
+
pmu-a53 {
compatible = "arm,cortex-a53-pmu";
interrupt-parent = <&gic>;
@@ -673,7 +758,7 @@
nvmem-cell-names = "calibration-data";
};
- thermal-zones {
+ thermal_zones: thermal-zones {
cpu_thermal: cpu_thermal {
polling-delay-passive = <100>;
polling-delay = <500>;
@@ -1118,6 +1203,26 @@
#clock-cells = <1>;
};
+ gpu: gpu@13040000 {
+ compatible = "mediatek,mt8183-mali", "arm,mali-bifrost";
+ reg = <0 0x13040000 0 0x4000>;
+ interrupts =
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "job", "mmu", "gpu";
+
+ clocks = <&topckgen CLK_TOP_MFGPLL_CK>;
+
+ power-domains =
+ <&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
+ <&spm MT8183_POWER_DOMAIN_MFG_CORE1>,
+ <&spm MT8183_POWER_DOMAIN_MFG_2D>;
+ power-domain-names = "core0", "core1", "core2";
+
+ operating-points-v2 = <&gpu_opp_table>;
+ };
+
mmsys: syscon@14000000 {
compatible = "mediatek,mt8183-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
@@ -1263,13 +1368,14 @@
};
smi_common: smi@14019000 {
- compatible = "mediatek,mt8183-smi-common", "syscon";
+ compatible = "mediatek,mt8183-smi-common";
reg = <0 0x14019000 0 0x1000>;
clocks = <&mmsys CLK_MM_SMI_COMMON>,
<&mmsys CLK_MM_SMI_COMMON>,
<&mmsys CLK_MM_GALS_COMM0>,
<&mmsys CLK_MM_GALS_COMM1>;
clock-names = "apb", "smi", "gals0", "gals1";
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
};
imgsys: syscon@15020000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 683743f..74c1a5d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -817,7 +817,7 @@
};
hda@3510000 {
- nvidia,model = "jetson-tx2-hda";
+ nvidia,model = "NVIDIA Jetson TX2 HDA";
status = "okay";
};
@@ -1109,6 +1109,6 @@
<&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>,
<&dmic3_port>, <&dspk1_port>, <&dspk2_port>;
- label = "jetson-tx2-ape";
+ label = "NVIDIA Jetson TX2 APE";
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 9f75bbf..d02f6bf 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -1082,7 +1082,7 @@
};
smmu: iommu@12000000 {
- compatible = "arm,mmu-500";
+ compatible = "nvidia,tegra186-smmu", "nvidia,smmu-500";
reg = <0 0x12000000 0 0x800000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
@@ -1152,6 +1152,8 @@
stream-match-mask = <0x7f80>;
#global-interrupts = <1>;
#iommu-cells = <1>;
+
+ nvidia,memory-controller = <&mc>;
};
host1x@13e00000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index d618f19..96bd01c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -554,7 +554,7 @@
};
hda@3510000 {
- nvidia,model = "jetson-xavier-hda";
+ nvidia,model = "NVIDIA Jetson AGX Xavier HDA";
status = "okay";
};
@@ -831,7 +831,7 @@
<&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
<&dmic3_port>;
- label = "jetson-xavier-ape";
+ label = "NVIDIA Jetson AGX Xavier APE";
widgets =
"Microphone", "CVB-RT MIC Jack",
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index d1d7722..836a7e0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -15,6 +15,577 @@
interrupt-controller@2a40000 {
status = "okay";
};
+
+ ahub@2900800 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ xbar_admaif0_ep: endpoint {
+ remote-endpoint = <&admaif0_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+
+ xbar_admaif1_ep: endpoint {
+ remote-endpoint = <&admaif1_ep>;
+ };
+ };
+
+ port@2 {
+ reg = <0x2>;
+
+ xbar_admaif2_ep: endpoint {
+ remote-endpoint = <&admaif2_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <0x3>;
+
+ xbar_admaif3_ep: endpoint {
+ remote-endpoint = <&admaif3_ep>;
+ };
+ };
+
+ port@4 {
+ reg = <0x4>;
+
+ xbar_admaif4_ep: endpoint {
+ remote-endpoint = <&admaif4_ep>;
+ };
+ };
+
+ port@5 {
+ reg = <0x5>;
+
+ xbar_admaif5_ep: endpoint {
+ remote-endpoint = <&admaif5_ep>;
+ };
+ };
+
+ port@6 {
+ reg = <0x6>;
+
+ xbar_admaif6_ep: endpoint {
+ remote-endpoint = <&admaif6_ep>;
+ };
+ };
+
+ port@7 {
+ reg = <0x7>;
+
+ xbar_admaif7_ep: endpoint {
+ remote-endpoint = <&admaif7_ep>;
+ };
+ };
+
+ port@8 {
+ reg = <0x8>;
+
+ xbar_admaif8_ep: endpoint {
+ remote-endpoint = <&admaif8_ep>;
+ };
+ };
+
+ port@9 {
+ reg = <0x9>;
+
+ xbar_admaif9_ep: endpoint {
+ remote-endpoint = <&admaif9_ep>;
+ };
+ };
+
+ port@a {
+ reg = <0xa>;
+
+ xbar_admaif10_ep: endpoint {
+ remote-endpoint = <&admaif10_ep>;
+ };
+ };
+
+ port@b {
+ reg = <0xb>;
+
+ xbar_admaif11_ep: endpoint {
+ remote-endpoint = <&admaif11_ep>;
+ };
+ };
+
+ port@c {
+ reg = <0xc>;
+
+ xbar_admaif12_ep: endpoint {
+ remote-endpoint = <&admaif12_ep>;
+ };
+ };
+
+ port@d {
+ reg = <0xd>;
+
+ xbar_admaif13_ep: endpoint {
+ remote-endpoint = <&admaif13_ep>;
+ };
+ };
+
+ port@e {
+ reg = <0xe>;
+
+ xbar_admaif14_ep: endpoint {
+ remote-endpoint = <&admaif14_ep>;
+ };
+ };
+
+ port@f {
+ reg = <0xf>;
+
+ xbar_admaif15_ep: endpoint {
+ remote-endpoint = <&admaif15_ep>;
+ };
+ };
+
+ port@10 {
+ reg = <0x10>;
+
+ xbar_admaif16_ep: endpoint {
+ remote-endpoint = <&admaif16_ep>;
+ };
+ };
+
+ port@11 {
+ reg = <0x11>;
+
+ xbar_admaif17_ep: endpoint {
+ remote-endpoint = <&admaif17_ep>;
+ };
+ };
+
+ port@12 {
+ reg = <0x12>;
+
+ xbar_admaif18_ep: endpoint {
+ remote-endpoint = <&admaif18_ep>;
+ };
+ };
+
+ port@13 {
+ reg = <0x13>;
+
+ xbar_admaif19_ep: endpoint {
+ remote-endpoint = <&admaif19_ep>;
+ };
+ };
+
+ xbar_i2s3_port: port@16 {
+ reg = <0x16>;
+
+ xbar_i2s3_ep: endpoint {
+ remote-endpoint = <&i2s3_cif_ep>;
+ };
+ };
+
+ xbar_i2s5_port: port@18 {
+ reg = <0x18>;
+
+ xbar_i2s5_ep: endpoint {
+ remote-endpoint = <&i2s5_cif_ep>;
+ };
+ };
+
+ xbar_dmic1_port: port@1a {
+ reg = <0x1a>;
+
+ xbar_dmic1_ep: endpoint {
+ remote-endpoint = <&dmic1_cif_ep>;
+ };
+ };
+
+ xbar_dmic2_port: port@1b {
+ reg = <0x1b>;
+
+ xbar_dmic2_ep: endpoint {
+ remote-endpoint = <&dmic2_cif_ep>;
+ };
+ };
+
+ xbar_dmic4_port: port@1d {
+ reg = <0x1d>;
+
+ xbar_dmic4_ep: endpoint {
+ remote-endpoint = <&dmic4_cif_ep>;
+ };
+ };
+
+ xbar_dspk1_port: port@1e {
+ reg = <0x1e>;
+
+ xbar_dspk1_ep: endpoint {
+ remote-endpoint = <&dspk1_cif_ep>;
+ };
+ };
+
+ xbar_dspk2_port: port@1f {
+ reg = <0x1f>;
+
+ xbar_dspk2_ep: endpoint {
+ remote-endpoint = <&dspk2_cif_ep>;
+ };
+ };
+ };
+
+ admaif@290f000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ admaif0_port: port@0 {
+ reg = <0x0>;
+
+ admaif0_ep: endpoint {
+ remote-endpoint = <&xbar_admaif0_ep>;
+ };
+ };
+
+ admaif1_port: port@1 {
+ reg = <0x1>;
+
+ admaif1_ep: endpoint {
+ remote-endpoint = <&xbar_admaif1_ep>;
+ };
+ };
+
+ admaif2_port: port@2 {
+ reg = <0x2>;
+
+ admaif2_ep: endpoint {
+ remote-endpoint = <&xbar_admaif2_ep>;
+ };
+ };
+
+ admaif3_port: port@3 {
+ reg = <0x3>;
+
+ admaif3_ep: endpoint {
+ remote-endpoint = <&xbar_admaif3_ep>;
+ };
+ };
+
+ admaif4_port: port@4 {
+ reg = <0x4>;
+
+ admaif4_ep: endpoint {
+ remote-endpoint = <&xbar_admaif4_ep>;
+ };
+ };
+
+ admaif5_port: port@5 {
+ reg = <0x5>;
+
+ admaif5_ep: endpoint {
+ remote-endpoint = <&xbar_admaif5_ep>;
+ };
+ };
+
+ admaif6_port: port@6 {
+ reg = <0x6>;
+
+ admaif6_ep: endpoint {
+ remote-endpoint = <&xbar_admaif6_ep>;
+ };
+ };
+
+ admaif7_port: port@7 {
+ reg = <0x7>;
+
+ admaif7_ep: endpoint {
+ remote-endpoint = <&xbar_admaif7_ep>;
+ };
+ };
+
+ admaif8_port: port@8 {
+ reg = <0x8>;
+
+ admaif8_ep: endpoint {
+ remote-endpoint = <&xbar_admaif8_ep>;
+ };
+ };
+
+ admaif9_port: port@9 {
+ reg = <0x9>;
+
+ admaif9_ep: endpoint {
+ remote-endpoint = <&xbar_admaif9_ep>;
+ };
+ };
+
+ admaif10_port: port@a {
+ reg = <0xa>;
+
+ admaif10_ep: endpoint {
+ remote-endpoint = <&xbar_admaif10_ep>;
+ };
+ };
+
+ admaif11_port: port@b {
+ reg = <0xb>;
+
+ admaif11_ep: endpoint {
+ remote-endpoint = <&xbar_admaif11_ep>;
+ };
+ };
+
+ admaif12_port: port@c {
+ reg = <0xc>;
+
+ admaif12_ep: endpoint {
+ remote-endpoint = <&xbar_admaif12_ep>;
+ };
+ };
+
+ admaif13_port: port@d {
+ reg = <0xd>;
+
+ admaif13_ep: endpoint {
+ remote-endpoint = <&xbar_admaif13_ep>;
+ };
+ };
+
+ admaif14_port: port@e {
+ reg = <0xe>;
+
+ admaif14_ep: endpoint {
+ remote-endpoint = <&xbar_admaif14_ep>;
+ };
+ };
+
+ admaif15_port: port@f {
+ reg = <0xf>;
+
+ admaif15_ep: endpoint {
+ remote-endpoint = <&xbar_admaif15_ep>;
+ };
+ };
+
+ admaif16_port: port@10 {
+ reg = <0x10>;
+
+ admaif16_ep: endpoint {
+ remote-endpoint = <&xbar_admaif16_ep>;
+ };
+ };
+
+ admaif17_port: port@11 {
+ reg = <0x11>;
+
+ admaif17_ep: endpoint {
+ remote-endpoint = <&xbar_admaif17_ep>;
+ };
+ };
+
+ admaif18_port: port@12 {
+ reg = <0x12>;
+
+ admaif18_ep: endpoint {
+ remote-endpoint = <&xbar_admaif18_ep>;
+ };
+ };
+
+ admaif19_port: port@13 {
+ reg = <0x13>;
+
+ admaif19_ep: endpoint {
+ remote-endpoint = <&xbar_admaif19_ep>;
+ };
+ };
+ };
+ };
+
+ i2s@2901200 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s3_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s3_ep>;
+ };
+ };
+
+ i2s3_port: port@1 {
+ reg = <1>;
+
+ i2s3_dap_ep: endpoint {
+ dai-format = "i2s";
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ i2s@2901400 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ i2s5_cif_ep: endpoint {
+ remote-endpoint = <&xbar_i2s5_ep>;
+ };
+ };
+
+ i2s5_port: port@1 {
+ reg = <1>;
+
+ i2s5_dap_ep: endpoint@0 {
+ dai-format = "i2s";
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@2904000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic1_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic1_ep>;
+ };
+ };
+
+ dmic1_port: port@1 {
+ reg = <1>;
+
+ dmic1_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@2904100 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic2_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic2_ep>;
+ };
+ };
+
+ dmic2_port: port@1 {
+ reg = <1>;
+
+ dmic2_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dmic@2904300 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dmic4_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dmic4_ep>;
+ };
+ };
+
+ dmic4_port: port@1 {
+ reg = <1>;
+
+ dmic4_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dspk@2905000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dspk1_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dspk1_ep>;
+ };
+ };
+
+ dspk1_port: port@1 {
+ reg = <1>;
+
+ dspk1_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+
+ dspk@2905100 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dspk2_cif_ep: endpoint {
+ remote-endpoint = <&xbar_dspk2_ep>;
+ };
+ };
+
+ dspk2_port: port@1 {
+ reg = <1>;
+
+ dspk2_dap_ep: endpoint {
+ /* Place holder for external Codec */
+ };
+ };
+ };
+ };
+ };
};
ddc: i2c@3190000 {
@@ -36,7 +607,7 @@
};
hda@3510000 {
- nvidia,model = "jetson-xavier-nx-hda";
+ nvidia,model = "NVIDIA Jetson Xavier NX HDA";
status = "okay";
};
@@ -265,6 +836,28 @@
regulator-boot-on;
};
+ sound {
+ compatible = "nvidia,tegra186-audio-graph-card";
+ status = "okay";
+
+ dais = /* ADMAIF (FE) Ports */
+ <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+ <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+ <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+ <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+ <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+ /* XBAR Ports */
+ <&xbar_i2s3_port>, <&xbar_i2s5_port>,
+ <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic4_port>,
+ <&xbar_dspk1_port>, <&xbar_dspk2_port>,
+ /* BE I/O Ports */
+ <&i2s3_port>, <&i2s5_port>,
+ <&dmic1_port>, <&dmic2_port>, <&dmic4_port>,
+ <&dspk1_port>, <&dspk2_port>;
+
+ label = "NVIDIA Jetson Xavier NX APE";
+ };
+
thermal-zones {
cpu {
polling-delay = <0>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 9449156..b7d5328 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -62,6 +62,7 @@
interconnects = <&mc TEGRA194_MEMORY_CLIENT_EQOSR &emc>,
<&mc TEGRA194_MEMORY_CLIENT_EQOSW &emc>;
interconnect-names = "dma-mem", "write";
+ iommus = <&smmu TEGRA194_SID_EQOS>;
status = "disabled";
snps,write-requests = <1>;
@@ -733,6 +734,7 @@
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
<&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>;
interconnect-names = "dma-mem", "write";
+ iommus = <&smmu TEGRA194_SID_SDMMC1>;
nvidia,pad-autocal-pull-up-offset-3v3-timeout =
<0x07>;
nvidia,pad-autocal-pull-down-offset-3v3-timeout =
@@ -759,6 +761,7 @@
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
<&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>;
interconnect-names = "dma-mem", "write";
+ iommus = <&smmu TEGRA194_SID_SDMMC3>;
nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
@@ -790,6 +793,7 @@
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRAB &emc>,
<&mc TEGRA194_MEMORY_CLIENT_SDMMCWAB &emc>;
interconnect-names = "dma-mem", "write";
+ iommus = <&smmu TEGRA194_SID_SDMMC4>;
nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
@@ -821,6 +825,7 @@
interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
interconnect-names = "dma-mem", "write";
+ iommus = <&smmu TEGRA194_SID_HDA>;
status = "disabled";
};
@@ -1300,6 +1305,84 @@
interrupt-controller;
};
+ smmu: iommu@12000000 {
+ compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500";
+ reg = <0x12000000 0x800000>,
+ <0x11000000 0x800000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ stream-match-mask = <0x7f80>;
+ #global-interrupts = <2>;
+ #iommu-cells = <1>;
+
+ nvidia,memory-controller = <&mc>;
+ status = "okay";
+ };
+
host1x@13e00000 {
compatible = "nvidia,tegra194-host1x";
reg = <0x13e00000 0x10000>,
@@ -1319,6 +1402,7 @@
ranges = <0x15000000 0x15000000 0x01000000>;
interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>;
interconnect-names = "dma-mem";
+ iommus = <&smmu TEGRA194_SID_HOST1X>;
display-hub@15200000 {
compatible = "nvidia,tegra194-display";
@@ -1430,6 +1514,7 @@
interconnects = <&mc TEGRA194_MEMORY_CLIENT_VICSRD &emc>,
<&mc TEGRA194_MEMORY_CLIENT_VICSWR &emc>;
interconnect-names = "dma-mem", "write";
+ iommus = <&smmu TEGRA194_SID_VIC>;
};
dpaux0: dpaux@155c0000 {
@@ -2136,6 +2221,7 @@
<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAR &emc>,
<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAW &emc>;
interconnect-names = "read", "write", "dma-mem", "dma-write";
+ iommus = <&smmu TEGRA194_SID_BPMP>;
bpmp_i2c: i2c {
compatible = "nvidia,tegra186-bpmp-i2c";
@@ -2345,6 +2431,20 @@
};
};
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0_0 &cpu0_1 &cpu1_0 &cpu1_1
+ &cpu2_0 &cpu2_1 &cpu3_0 &cpu3_1>;
+ };
+
psci {
compatible = "arm,psci-1.0";
status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index 497635a..7d3e363 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -424,6 +424,6 @@
<&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
<&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>;
- label = "jetson-tx1-ape";
+ label = "NVIDIA Jetson TX1 APE";
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index a9caaf7c..d8409c1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1345,7 +1345,7 @@
};
hda@70030000 {
- nvidia,model = "jetson-tx1-hda";
+ nvidia,model = "NVIDIA Jetson TX1 HDA";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 14c128a..7dbb13f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -441,7 +441,7 @@
};
hda@70030000 {
- nvidia,model = "jetson-nano-hda";
+ nvidia,model = "NVIDIA Jetson Nano HDA";
status = "okay";
};
@@ -1043,6 +1043,6 @@
<&i2s3_port>, <&i2s4_port>,
<&dmic1_port>, <&dmic2_port>;
- label = "jetson-nano-ape";
+ label = "NVIDIA Jetson Nano APE";
};
};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 456502a..4f05970 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -5,8 +5,11 @@
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
@@ -32,11 +35,12 @@
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
@@ -51,6 +55,8 @@
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
@@ -70,8 +76,13 @@
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index defcbd1..06869235 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -41,14 +41,14 @@
/ {
aliases {
- serial0 = &blsp2_uart1;
- serial1 = &blsp2_uart2;
- serial2 = &blsp1_uart1;
- i2c0 = &blsp1_i2c2;
+ serial0 = &blsp2_uart2;
+ serial1 = &blsp2_uart3;
+ serial2 = &blsp1_uart2;
+ i2c0 = &blsp1_i2c3;
i2c1 = &blsp2_i2c1;
- i2c2 = &blsp2_i2c0;
- spi0 = &blsp1_spi0;
- spi1 = &blsp2_spi5;
+ i2c2 = &blsp2_i2c1;
+ spi0 = &blsp1_spi1;
+ spi1 = &blsp2_spi6;
};
chosen {
@@ -133,24 +133,24 @@
};
};
-&blsp1_i2c2 {
+&blsp1_i2c3 {
/* On Low speed expansion */
label = "LS-I2C0";
status = "okay";
};
-&blsp1_spi0 {
+&blsp1_spi1 {
/* On Low speed expansion */
label = "LS-SPI0";
status = "okay";
};
-&blsp1_uart1 {
+&blsp1_uart2 {
label = "BT-UART";
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart1_default>;
- pinctrl-1 = <&blsp1_uart1_sleep>;
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
bluetooth {
compatible = "qcom,qca6174-bt";
@@ -162,7 +162,11 @@
};
};
-&blsp2_i2c0 {
+&adsp_pil {
+ status = "okay";
+};
+
+&blsp2_i2c1 {
/* On High speed expansion */
label = "HS-I2C2";
status = "okay";
@@ -174,32 +178,36 @@
status = "okay";
};
-&blsp2_spi5 {
+&blsp2_spi6 {
/* On High speed expansion */
label = "HS-SPI1";
status = "okay";
};
-&blsp2_uart1 {
+&blsp2_uart2 {
label = "LS-UART1";
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart1_2pins_default>;
- pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+ pinctrl-0 = <&blsp2_uart2_2pins_default>;
+ pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
};
-&blsp2_uart2 {
+&blsp2_uart3 {
label = "LS-UART0";
status = "disabled";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_4pins_default>;
- pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+ pinctrl-0 = <&blsp2_uart3_4pins_default>;
+ pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
};
&camss {
vdda-supply = <&vreg_l2a_1p25>;
};
+&gpu {
+ status = "okay";
+};
+
&hdmi {
status = "okay";
@@ -245,7 +253,12 @@
vdd-gfx-supply = <&vdd_gfx>;
};
-&msmgpio {
+&pm8994_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&tlmm {
gpio-line-names =
"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
@@ -424,7 +437,7 @@
};
};
- blsp1_uart1_default: blsp1_uart1_default {
+ blsp1_uart2_default: blsp1_uart2_default {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "blsp_uart2";
@@ -437,7 +450,7 @@
};
};
- blsp1_uart1_sleep: blsp1_uart1_sleep {
+ blsp1_uart2_sleep: blsp1_uart2_sleep {
mux {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "gpio";
@@ -505,20 +518,20 @@
&pcie0 {
status = "okay";
- perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+ perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie1 {
status = "okay";
- perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+ perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
&pcie2 {
status = "okay";
- perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+ perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
vdda-supply = <&vreg_l28a_0p925>;
};
@@ -929,9 +942,9 @@
&sdhc2 {
/* External SD card */
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
- cd-gpios = <&msmgpio 38 0x1>;
+ pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
status = "okay";
@@ -1026,20 +1039,6 @@
};
};
-&spmi_bus {
- pmic@0 {
- pon@800 {
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
- };
-};
-
&ufsphy {
status = "okay";
@@ -1064,7 +1063,7 @@
status = "okay";
extcon = <&usb2_id>;
- dwc3@7600000 {
+ usb@7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
@@ -1075,7 +1074,7 @@
status = "okay";
extcon = <&usb3_id>;
- dwc3@6a00000 {
+ usb@6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
@@ -1089,6 +1088,10 @@
};
+&venus {
+ status = "okay";
+};
+
&wcd9335 {
clock-names = "mclk", "slimbus";
clocks = <&div1_mclk>,
diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
index f6ddf17a..8c7a27e 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -17,7 +17,7 @@
qcom,board-id = <0x00010018 0>;
aliases {
- serial0 = &blsp2_uart1;
+ serial0 = &blsp2_uart2;
};
chosen {
@@ -81,14 +81,22 @@
};
};
-&blsp2_uart1 {
+&blsp2_uart2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart1_2pins_default>;
- pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+ pinctrl-0 = <&blsp2_uart2_2pins_default>;
+ pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
};
-&msmgpio {
+&gpu {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&tlmm {
sdc2_pins_default: sdc2-pins-default {
clk {
pins = "sdc2_clk";
@@ -352,7 +360,7 @@
bus-width = <4>;
- cd-gpios = <&msmgpio 38 0x1>;
+ cd-gpios = <&tlmm 38 0x1>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vreg_l13a_2p95>;
@@ -383,3 +391,7 @@
vdda-phy-max-microamp = <18380>;
vdda-pll-max-microamp = <9440>;
};
+
+&venus {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
new file mode 100644
index 0000000..2bfcf42
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074-hk10.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C1";
+ compatible = "qcom,ipq8074-hk10-c1", "qcom,ipq8074";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
new file mode 100644
index 0000000..7da39f1d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/* Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074-hk10.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2";
+ compatible = "qcom,ipq8074-hk10-c2", "qcom,ipq8074";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
new file mode 100644
index 0000000..07e6708
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+
+/ {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+
+ interrupt-parent = <&intc>;
+
+ aliases {
+ serial0 = &blsp1_uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0x20000000>;
+ };
+};
+
+&blsp1_spi1 {
+ status = "ok";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&blsp1_uart5 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+ perst-gpio = <&tlmm 58 0x1>;
+};
+
+&pcie1 {
+ status = "ok";
+ perst-gpio = <&tlmm 61 0x1>;
+};
+
+&pcie_phy0 {
+ status = "ok";
+};
+
+&pcie_phy1 {
+ status = "ok";
+};
+
+&qpic_bam {
+ status = "ok";
+};
+
+&qpic_nand {
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a32e5e7..95d6cb8 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -165,6 +165,7 @@
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+ status = "disabled";
};
pcie_phy0: phy@86000 {
@@ -372,6 +373,21 @@
status = "disabled";
};
+ blsp1_i2c6: i2c@78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x078ba000 0x600>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <100000>;
+ dmas = <&blsp_dma 23>, <&blsp_dma 22>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
qpic_bam: dma-controller@7984000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07984000 0x1a000>;
@@ -427,7 +443,7 @@
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
- dwc_0: dwc3@8a00000 {
+ dwc_0: usb@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +484,7 @@
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
- dwc_1: dwc3@8c00000 {
+ dwc_1: usb@8c00000 {
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 540b1fa..670bd1b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -45,6 +45,24 @@
status = "okay";
};
+&blsp_i2c4 {
+ status = "okay";
+
+ touchscreen@26 {
+ compatible = "mstar,msg2638";
+ reg = <0x26>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_reset_default>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+ touchscreen-size-x = <2048>;
+ touchscreen-size-y = <2048>;
+ };
+};
+
&blsp_i2c5 {
status = "okay";
@@ -281,6 +299,14 @@
bias-pull-up;
};
+ ts_int_reset_default: ts-int-reset-default {
+ pins = "gpio13", "gpio100";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
usb_id_default: usb-id-default {
pins = "gpio69";
function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
new file mode 100644
index 0000000..e0075b5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -0,0 +1,454 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2021 Stephan Gerhold
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/*
+ * Note: The original firmware from Huawei can only boot 32-bit kernels.
+ * To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
+ * with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei
+ * forgot to set up (firmware) secure boot for some reason.
+ *
+ * Also note that Huawei no longer provides bootloader unlock codes.
+ * This can be bypassed by patching the bootloader from a custom HYP firmware,
+ * making it think the bootloader is unlocked.
+ *
+ * See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7)
+ */
+
+/ {
+ model = "Huawei Ascend G7";
+ compatible = "huawei,g7", "qcom,msm8916";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default>;
+
+ label = "GPIO Buttons";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_leds_default>;
+
+ led-0 {
+ gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ };
+
+ led-1 {
+ gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ };
+
+ led-2 {
+ gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ function = LED_FUNCTION_INDICATOR;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+
+ reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mag_reset_default>;
+ };
+
+ accelerometer@1e {
+ compatible = "kionix,kx023-1025";
+ reg = <0x1e>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_irq_default>;
+
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+
+ proximity@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ led-max-microamp = <100000>;
+ amstaos,proximity-diodes = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&prox_irq_default>;
+ };
+
+ regulator@3e {
+ compatible = "ti,tps65132";
+ reg = <0x3e>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <®_lcd_en_default>;
+
+ reg_lcd_pos: outp {
+ regulator-name = "outp";
+ regulator-min-microvolt = <5400000>;
+ regulator-max-microvolt = <5400000>;
+ enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
+ regulator-active-discharge = <1>;
+ };
+
+ reg_lcd_neg: outn {
+ regulator-name = "outn";
+ regulator-min-microvolt = <5400000>;
+ regulator-max-microvolt = <5400000>;
+ enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+ regulator-active-discharge = <1>;
+ };
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ rmi4@70 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l16>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_irq_default>;
+
+ syna,startup-delay-ms = <100>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>; /* Allow sleeping */
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>; /* Touchscreen */
+ };
+ };
+};
+
+&blsp_i2c6 {
+ status = "okay";
+
+ nfc@28 {
+ compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nfc_default>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&pronto {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>;
+
+ /*
+ * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>.
+ * However, gpio38 does not change its state when inserting/removing the
+ * SD card, it's just low all the time. The Huawei kernel seems to use
+ * polling for SD card detection instead.
+ *
+ * However, looking closer at the GPIO debug output it turns out that
+ * gpio56 switches its state when inserting/removing the SD card.
+ * It behaves just like gpio38 normally does. Usually GPIO56 is used as
+ * "UIM2_PRESENT", i.e. to check if a second SIM card is inserted.
+ * Maybe Huawei decided to replace the second SIM card slot with the
+ * SD card slot and forgot to re-route to gpio38.
+ */
+ cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&smd_rpm_regulators {
+ vdd_l1_l2_l3-supply = <&pm8916_s3>;
+ vdd_l4_l5_l6-supply = <&pm8916_s4>;
+ vdd_l7-supply = <&pm8916_s4>;
+
+ s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+};
+
+&msmgpio {
+ accel_irq_default: accel-irq-default {
+ pins = "gpio115";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default {
+ pins = "gpio107";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gpio_leds_default: gpio-leds-default {
+ pins = "gpio8", "gpio9", "gpio10";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ nfc_default: nfc-default {
+ pins = "gpio2", "gpio20", "gpio21";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ mag_reset_default: mag-reset-default {
+ pins = "gpio36";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ prox_irq_default: prox-irq-default {
+ pins = "gpio113";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ reg_lcd_en_default: reg-lcd-en-default {
+ pins = "gpio32", "gpio97";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_cd_default: sdhc2-cd-default {
+ pins = "gpio56";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ ts_irq_default: ts-irq-default {
+ pins = "gpio13";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb_id_default: usb-id-default {
+ pins = "gpio117";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 230ba3c..9b4b7de 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
aliases {
@@ -95,6 +96,63 @@
pinctrl-0 = <&muic_int_default>;
};
};
+
+ i2c-tkey {
+ compatible = "i2c-gpio";
+ sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_i2c_default>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchkey: touchkey@20 {
+ /* Note: Actually an ABOV MCU that implements same interface */
+ compatible = "coreriver,tc360-touchkey";
+ reg = <0x20>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
+
+ /* vcc/vdd-supply are board-specific */
+ vddio-supply = <&pm8916_l6>;
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_default>;
+ };
+ };
+
+ i2c-nfc {
+ compatible = "i2c-gpio";
+ sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nfc_i2c_default>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+ en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
+
+ clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nfc_default &nfc_clk_req>;
+ };
+ };
};
&blsp_i2c2 {
@@ -122,6 +180,20 @@
};
};
+&blsp_i2c4 {
+ status = "okay";
+
+ battery@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fg_alert_default>;
+ };
+};
+
&blsp1_uart2 {
status = "okay";
};
@@ -284,6 +356,14 @@
bias-disable;
};
+ fg_alert_default: fg-alert-default {
+ pins = "gpio121";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
gpio_keys_default: gpio-keys-default {
pins = "gpio107", "gpio109";
function = "gpio";
@@ -333,6 +413,46 @@
bias-disable;
};
+ nfc_default: nfc-default {
+ pins = "gpio20", "gpio49";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+
+ irq {
+ pins = "gpio21";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ nfc_i2c_default: nfc-i2c-default {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tkey_default: tkey-default {
+ pins = "gpio98";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tkey_i2c_default: tkey-i2c-default {
+ pins = "gpio16", "gpio17";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
tsp_en_default: tsp-en-default {
pins = "gpio73";
function = "gpio";
@@ -341,3 +461,14 @@
bias-disable;
};
};
+
+&pm8916_gpios {
+ nfc_clk_req: nfc-clk-req {
+ pins = "gpio2";
+ function = "func1";
+
+ input-enable;
+ bias-disable;
+ power-source = <PM8916_GPIO_L2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 661f41a..6cc2eae 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -20,6 +20,37 @@
pinctrl-names = "default";
pinctrl-0 = <&panel_vdd3_default>;
};
+
+ reg_touch_key: regulator-touch-key {
+ compatible = "regulator-fixed";
+ regulator-name = "touch_key";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_en_default>;
+ };
+
+ reg_key_led: regulator-key-led {
+ compatible = "regulator-fixed";
+ regulator-name = "key_led";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_led_en_default>;
+ };
+};
+
+&touchkey {
+ vcc-supply = <®_touch_key>;
+ vdd-supply = <®_key_led>;
};
&accelerometer {
@@ -81,6 +112,22 @@
bias-disable;
};
+ tkey_en_default: tkey-en-default {
+ pins = "gpio86";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tkey_led_en_default: tkey-led-en-default {
+ pins = "gpio60";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
ts_int_default: ts-int-default {
pins = "gpio13";
function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index dd35c33..c2eff5a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -7,6 +7,19 @@
/ {
model = "Samsung Galaxy A5U (EUR)";
compatible = "samsung,a5u-eur", "qcom,msm8916";
+
+ reg_touch_key: regulator-touch-key {
+ compatible = "regulator-fixed";
+ regulator-name = "touch_key";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tkey_en_default>;
+ };
};
&accelerometer {
@@ -42,7 +55,20 @@
};
};
+&touchkey {
+ vcc-supply = <®_touch_key>;
+ vdd-supply = <®_touch_key>;
+};
+
&msmgpio {
+ tkey_en_default: tkey-en-default {
+ pins = "gpio97";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
ts_int_default: ts-int-default {
pins = "gpio13";
function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index baa5564..ffe1a9b 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -32,3 +32,7 @@
};
};
};
+
+&tlmm {
+ gpio-reserved-ranges = <85 4>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
index 5f46a14..1e1514e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
@@ -7,7 +7,7 @@
/ {
aliases {
- serial0 = &blsp2_uart1;
+ serial0 = &blsp2_uart2;
};
chosen {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
deleted file mode 100644
index ac1ede5..0000000
--- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
+++ /dev/null
@@ -1,653 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-
-&msmgpio {
-
- wcd9xxx_intr {
- wcd_intr_default: wcd_intr_default{
- mux {
- pins = "gpio54";
- function = "gpio";
- };
-
- config {
- pins = "gpio54";
- drive-strength = <2>; /* 2 mA */
- bias-pull-down; /* pull down */
- input-enable;
- };
- };
- };
-
- cdc_reset_ctrl {
- cdc_reset_sleep: cdc_reset_sleep {
- mux {
- pins = "gpio64";
- function = "gpio";
- };
- config {
- pins = "gpio64";
- drive-strength = <16>;
- bias-disable;
- output-low;
- };
- };
- cdc_reset_active:cdc_reset_active {
- mux {
- pins = "gpio64";
- function = "gpio";
- };
- config {
- pins = "gpio64";
- drive-strength = <16>;
- bias-pull-down;
- output-high;
- };
- };
- };
-
- blsp1_spi0_default: blsp1_spi0_default {
- pinmux {
- function = "blsp_spi1";
- pins = "gpio0", "gpio1", "gpio3";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio2";
- };
- pinconf {
- pins = "gpio0", "gpio1", "gpio3";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio2";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp1_spi0_sleep: blsp1_spi0_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- };
- pinconf {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- blsp1_i2c2_default: blsp1_i2c2_default {
- pinmux {
- function = "blsp_i2c3";
- pins = "gpio47", "gpio48";
- };
- pinconf {
- pins = "gpio47", "gpio48";
- drive-strength = <16>;
- bias-disable = <0>;
- };
- };
-
- blsp1_i2c2_sleep: blsp1_i2c2_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio47", "gpio48";
- };
- pinconf {
- pins = "gpio47", "gpio48";
- drive-strength = <2>;
- bias-disable = <0>;
- };
- };
-
- blsp2_i2c0_default: blsp2_i2c0 {
- pinmux {
- function = "blsp_i2c7";
- pins = "gpio55", "gpio56";
- };
- pinconf {
- pins = "gpio55", "gpio56";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_i2c0_sleep: blsp2_i2c0_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio55", "gpio56";
- };
- pinconf {
- pins = "gpio55", "gpio56";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_uart1_2pins_default: blsp2_uart1_2pins {
- pinmux {
- function = "blsp_uart8";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_uart1_2pins_sleep: blsp2_uart1_2pins_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_uart1_4pins_default: blsp2_uart1_4pins {
- pinmux {
- function = "blsp_uart8";
- pins = "gpio4", "gpio5", "gpio6", "gpio7";
- };
-
- pinconf {
- pins = "gpio4", "gpio5", "gpio6", "gpio7";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_uart1_4pins_sleep: blsp2_uart1_4pins_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio4", "gpio5", "gpio6", "gpio7";
- };
-
- pinconf {
- pins = "gpio4", "gpio5", "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_i2c1_default: blsp2_i2c1 {
- pinmux {
- function = "blsp_i2c8";
- pins = "gpio6", "gpio7";
- };
- pinconf {
- pins = "gpio6", "gpio7";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_i2c1_sleep: blsp2_i2c1_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio6", "gpio7";
- };
- pinconf {
- pins = "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_uart2_2pins_default: blsp2_uart2_2pins {
- pinmux {
- function = "blsp_uart9";
- pins = "gpio49", "gpio50";
- };
- pinconf {
- pins = "gpio49", "gpio50";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_uart2_2pins_sleep: blsp2_uart2_2pins_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio49", "gpio50";
- };
- pinconf {
- pins = "gpio49", "gpio50";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_uart2_4pins_default: blsp2_uart2_4pins {
- pinmux {
- function = "blsp_uart9";
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- };
-
- pinconf {
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp2_uart2_4pins_sleep: blsp2_uart2_4pins_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- };
-
- pinconf {
- pins = "gpio49", "gpio50", "gpio51", "gpio52";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- blsp2_spi5_default: blsp2_spi5_default {
- pinmux {
- function = "blsp_spi12";
- pins = "gpio85", "gpio86", "gpio88";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio87";
- };
- pinconf {
- pins = "gpio85", "gpio86", "gpio88";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio87";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
- };
-
- blsp2_spi5_sleep: blsp2_spi5_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio85", "gpio86", "gpio87", "gpio88";
- };
- pinconf {
- pins = "gpio85", "gpio86", "gpio87", "gpio88";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- sdc2_clk_on: sdc2_clk_on {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <16>; /* 16 MA */
- };
- };
-
- sdc2_clk_off: sdc2_clk_off {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <2>; /* 2 MA */
- };
- };
-
- sdc2_cmd_on: sdc2_cmd_on {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 MA */
- };
- };
-
- sdc2_cmd_off: sdc2_cmd_off {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 MA */
- };
- };
-
- sdc2_data_on: sdc2_data_on {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 MA */
- };
- };
-
- sdc2_data_off: sdc2_data_off {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 MA */
- };
- };
-
- pcie0_clkreq_default: pcie0_clkreq_default {
- mux {
- pins = "gpio36";
- function = "pci_e0";
- };
-
- config {
- pins = "gpio36";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie0_perst_default: pcie0_perst_default {
- mux {
- pins = "gpio35";
- function = "gpio";
- };
-
- config {
- pins = "gpio35";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie0_wake_default: pcie0_wake_default {
- mux {
- pins = "gpio37";
- function = "gpio";
- };
-
- config {
- pins = "gpio37";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie0_clkreq_sleep: pcie0_clkreq_sleep {
- mux {
- pins = "gpio36";
- function = "gpio";
- };
-
- config {
- pins = "gpio36";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie0_wake_sleep: pcie0_wake_sleep {
- mux {
- pins = "gpio37";
- function = "gpio";
- };
-
- config {
- pins = "gpio37";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie1_clkreq_default: pcie1_clkreq_default {
- mux {
- pins = "gpio131";
- function = "pci_e1";
- };
-
- config {
- pins = "gpio131";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie1_perst_default: pcie1_perst_default {
- mux {
- pins = "gpio130";
- function = "gpio";
- };
-
- config {
- pins = "gpio130";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie1_wake_default: pcie1_wake_default {
- mux {
- pins = "gpio132";
- function = "gpio";
- };
-
- config {
- pins = "gpio132";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie1_clkreq_sleep: pcie1_clkreq_sleep {
- mux {
- pins = "gpio131";
- function = "gpio";
- };
-
- config {
- pins = "gpio131";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie1_wake_sleep: pcie1_wake_sleep {
- mux {
- pins = "gpio132";
- function = "gpio";
- };
-
- config {
- pins = "gpio132";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie2_clkreq_default: pcie2_clkreq_default {
- mux {
- pins = "gpio115";
- function = "pci_e2";
- };
-
- config {
- pins = "gpio115";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie2_perst_default: pcie2_perst_default {
- mux {
- pins = "gpio114";
- function = "gpio";
- };
-
- config {
- pins = "gpio114";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie2_wake_default: pcie2_wake_default {
- mux {
- pins = "gpio116";
- function = "gpio";
- };
-
- config {
- pins = "gpio116";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- pcie2_clkreq_sleep: pcie2_clkreq_sleep {
- mux {
- pins = "gpio115";
- function = "gpio";
- };
-
- config {
- pins = "gpio115";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie2_wake_sleep: pcie2_wake_sleep {
- mux {
- pins = "gpio116";
- function = "gpio";
- };
-
- config {
- pins = "gpio116";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- cci0_default: cci0_default {
- pinmux {
- function = "cci_i2c";
- pins = "gpio17", "gpio18";
- };
- pinconf {
- pins = "gpio17", "gpio18";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- cci1_default: cci1_default {
- pinmux {
- function = "cci_i2c";
- pins = "gpio19", "gpio20";
- };
- pinconf {
- pins = "gpio19", "gpio20";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- camera_board_default: camera_board_default {
- mux_pwdn {
- function = "gpio";
- pins = "gpio98";
- };
- config_pwdn {
- pins = "gpio98";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_rst {
- function = "gpio";
- pins = "gpio104";
- };
- config_rst {
- pins = "gpio104";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_mclk1 {
- function = "cam_mclk";
- pins = "gpio14";
- };
- config_mclk1 {
- pins = "gpio14";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- camera_front_default: camera_front_default {
- mux_pwdn {
- function = "gpio";
- pins = "gpio133";
- };
- config_pwdn {
- pins = "gpio133";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_rst {
- function = "gpio";
- pins = "gpio23";
- };
- config_rst {
- pins = "gpio23";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_mclk2 {
- function = "cam_mclk";
- pins = "gpio15";
- };
- config_mclk2 {
- pins = "gpio15";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- camera_rear_default: camera_rear_default {
- mux_pwdn {
- function = "gpio";
- pins = "gpio26";
- };
- config_pwdn {
- pins = "gpio26";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_rst {
- function = "gpio";
- pins = "gpio25";
- };
- config_rst {
- pins = "gpio25";
- drive-strength = <16>;
- bias-disable;
- };
-
- mux_mclk0 {
- function = "cam_mclk";
- pins = "gpio13";
- };
- config_mclk0 {
- pins = "gpio13";
- drive-strength = <16>;
- bias-disable;
- };
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 5d06216..0e1bc46 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -6,7 +6,9 @@
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -43,6 +45,9 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -57,6 +62,9 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 0>;
+ operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_0>;
};
@@ -67,6 +75,9 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -81,6 +92,9 @@
enable-method = "psci";
cpu-idle-states = <&CPU_SLEEP_0>;
capacity-dmips-mhz = <1024>;
+ clocks = <&kryocc 1>;
+ operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
next-level-cache = <&L2_1>;
};
@@ -120,6 +134,227 @@
};
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ /* Nominal fmax for now */
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-422400000 {
+ opp-hz = /bits/ 64 <422400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-844800000 {
+ opp-hz = /bits/ 64 <844800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+ opp-shared;
+
+ /* Nominal fmax for now */
+ opp-307200000 {
+ opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-556800000 {
+ opp-hz = /bits/ 64 <556800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-883200000 {
+ opp-hz = /bits/ 64 <883200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-940800000 {
+ opp-hz = /bits/ 64 <940800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1632000000 {
+ opp-hz = /bits/ 64 <1632000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1708800000 {
+ opp-hz = /bits/ 64 <1708800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1785600000 {
+ opp-hz = /bits/ 64 <1785600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1824000000 {
+ opp-hz = /bits/ 64 <1824000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2073600000 {
+ opp-hz = /bits/ 64 <2073600000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2150400000 {
+ opp-hz = /bits/ 64 <2150400000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ };
+
firmware {
scm {
compatible = "qcom,scm-msm8996";
@@ -424,7 +659,7 @@
bits = <1 4>;
};
- gpu_speed_bin: gpu_speed_bin@133 {
+ speedbin_efuse: speedbin@133 {
reg = <0x133 0x1>;
bits = <5 3>;
};
@@ -472,7 +707,7 @@
tcsr_mutex_regs: syscon@740000 {
compatible = "syscon";
- reg = <0x00740000 0x20000>;
+ reg = <0x00740000 0x40000>;
};
tcsr: syscon@7a0000 {
@@ -521,6 +756,8 @@
#size-cells = <1>;
ranges;
+ status = "disabled";
+
mdp: mdp@901000 {
compatible = "qcom,mdp5";
reg = <0x00901000 0x90000>;
@@ -542,6 +779,11 @@
iommus = <&mdp_smmu 0>;
+ assigned-clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <300000000>,
+ <19200000>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -552,9 +794,82 @@
remote-endpoint = <&hdmi_in>;
};
};
+
+ port@1 {
+ reg = <1>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
};
};
+ dsi0: dsi@994000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x00994000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MMSS_MISC_AHB_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>;
+ clock-names = "mdp_core",
+ "byte",
+ "iface",
+ "bus",
+ "core_mmss",
+ "pixel",
+ "core";
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp5_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: dsi-phy@994400 {
+ compatible = "qcom,dsi-phy-14nm";
+ reg = <0x00994400 0x100>,
+ <0x00994500 0x300>,
+ <0x00994800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+ clock-names = "iface", "ref";
+ status = "disabled";
+ };
+
hdmi: hdmi-tx@9a0000 {
compatible = "qcom,hdmi-tx-8996";
reg = <0x009a0000 0x50c>,
@@ -618,7 +933,8 @@
"ref";
};
};
- gpu@b00000 {
+
+ gpu: gpu@b00000 {
compatible = "qcom,adreno-530.2", "qcom,adreno";
#stream-id-cells = <16>;
@@ -642,7 +958,7 @@
power-domains = <&mmcc GPU_GX_GDSC>;
iommus = <&adreno_smmu 0>;
- nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cells = <&speedbin_efuse>;
nvmem-cell-names = "speed_bin";
qcom,gpu-quirk-two-pass-use-wfi;
@@ -650,6 +966,8 @@
operating-points-v2 = <&gpu_opp_table>;
+ status = "disabled";
+
gpu_opp_table: opp-table {
compatible ="operating-points-v2";
@@ -693,15 +1011,482 @@
};
};
- msmgpio: pinctrl@1010000 {
+ tlmm: pinctrl@1010000 {
compatible = "qcom,msm8996-pinctrl";
reg = <0x01010000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
- gpio-ranges = <&msmgpio 0 0 150>;
+ gpio-ranges = <&tlmm 0 0 150>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ blsp1_spi1_default: blsp1-spi1-default {
+ spi {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp1_spi1_sleep: blsp1-spi1-sleep {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp2_uart2_2pins_default: blsp2-uart1-2pins {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart8";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_uart2_2pins_sleep: blsp2-uart1-2pins-sleep {
+ pins = "gpio4", "gpio5";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c2_default: blsp2-i2c2 {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c8";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+ pins = "gpio6", "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cci0_default: cci0-default {
+ pins = "gpio17", "gpio18";
+ function = "cci_i2c";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ camera0_state_on:
+ camera_rear_default: camera-rear-default {
+ mclk0 {
+ pins = "gpio13";
+ function = "cam_mclk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ rst {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pwdn {
+ pins = "gpio26";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ cci1_default: cci1-default {
+ pins = "gpio19", "gpio20";
+ function = "cci_i2c";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ camera1_state_on:
+ camera_board_default: camera-board-default {
+ mclk1 {
+ pins = "gpio14";
+ function = "cam_mclk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pwdn {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ rst {
+ pins = "gpio104";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera2_state_on:
+ camera_front_default: camera-front-default {
+ mclk2 {
+ pins = "gpio15";
+ function = "cam_mclk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ rst {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ pwdn {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ pcie0_state_on: pcie0-state-on {
+ perst {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio36";
+ function = "pci_e0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie0_state_off: pcie0-state-off {
+ perst {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio36";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ blsp1_i2c3_default: blsp1-i2c2-default {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c3";
+ drive-strength = <16>;
+ bias-disable = <0>;
+ };
+
+ blsp1_i2c3_sleep: blsp1-i2c2-sleep {
+ pins = "gpio47", "gpio48";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+
+ blsp2_uart3_4pins_default: blsp2-uart2-4pins {
+ pins = "gpio49", "gpio50", "gpio51", "gpio52";
+ function = "blsp_uart9";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep {
+ pins = "gpio49", "gpio50", "gpio51", "gpio52";
+ function = "blsp_uart9";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wcd_intr_default: wcd-intr-default{
+ pins = "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+
+ blsp2_i2c1_default: blsp2-i2c1 {
+ pins = "gpio55", "gpio56";
+ function = "blsp_i2c7";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_i2c1_sleep: blsp2-i2c0-sleep {
+ pins = "gpio55", "gpio56";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c5_default: blsp2-i2c5 {
+ pins = "gpio60", "gpio61";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ /* Sleep state for BLSP2_I2C5 is missing.. */
+
+ cdc_reset_active: cdc-reset-active {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-down;
+ output-high;
+ };
+
+ cdc_reset_sleep: cdc-reset-sleep {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ blsp2_spi6_default: blsp2-spi5-default {
+ spi {
+ pins = "gpio85", "gpio86", "gpio88";
+ function = "blsp_spi12";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs {
+ pins = "gpio87";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp2_spi6_sleep: blsp2-spi5-sleep {
+ pins = "gpio85", "gpio86", "gpio87", "gpio88";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp2_i2c6_default: blsp2-i2c6 {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+ pins = "gpio87", "gpio88";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie1_state_on: pcie1-state-on {
+ perst {
+ pins = "gpio130";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio131";
+ function = "pci_e1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio132";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ pcie1_state_off: pcie1-state-off {
+ /* Perst is missing? */
+ clkreq {
+ pins = "gpio131";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake {
+ pins = "gpio132";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ pcie2_state_on: pcie2-state-on {
+ perst {
+ pins = "gpio114";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio115";
+ function = "pci_e2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio116";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ pcie2_state_off: pcie2-state-off {
+ /* Perst is missing? */
+ clkreq {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake {
+ pins = "gpio116";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ sdc1_state_on: sdc1-state-on {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_state_off: sdc1-state-off {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_state_on: sdc2-clk-on {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_state_off: sdc2-clk-off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
};
spmi_bus: qcom,spmi@400f000 {
@@ -762,8 +1547,8 @@
<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
- pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
+ pinctrl-0 = <&pcie0_state_on>;
+ pinctrl-1 = <&pcie0_state_off>;
linux,pci-domain = <0>;
@@ -816,8 +1601,8 @@
<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
- pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+ pinctrl-0 = <&pcie1_state_on>;
+ pinctrl-1 = <&pcie1_state_off>;
linux,pci-domain = <1>;
@@ -867,8 +1652,8 @@
<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
- pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+ pinctrl-0 = <&pcie2_state_on>;
+ pinctrl-1 = <&pcie2_state_off>;
linux,pci-domain = <2>;
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
@@ -1152,7 +1937,7 @@
power-domains = <&mmcc GPU_GDSC>;
};
- video-codec@c00000 {
+ venus: video-codec@c00000 {
compatible = "qcom,msm8996-venus";
reg = <0x00c00000 0xff000>;
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
@@ -1183,7 +1968,7 @@
<&venus_smmu 0x2d>,
<&venus_smmu 0x31>;
memory-region = <&venus_region>;
- status = "okay";
+ status = "disabled";
video-decoder {
compatible = "venus-decoder";
@@ -1745,9 +2530,14 @@
};
};
};
+
kryocc: clock-controller@6400000 {
- compatible = "qcom,apcc-msm8996";
+ compatible = "qcom,msm8996-apcc";
reg = <0x06400000 0x90000>;
+
+ clock-names = "xo";
+ clocks = <&xo_board>;
+
#clock-cells = <1>;
};
@@ -1758,6 +2548,10 @@
#size-cells = <1>;
ranges;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -1772,7 +2566,7 @@
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
- dwc3@6a00000 {
+ usb@6a00000 {
compatible = "snps,dwc3";
reg = <0x06a00000 0xcc00>;
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@@ -1841,34 +2635,75 @@
status = "disabled";
};
+ sdhc1: sdhci@7464900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x07464900 0x11c>, <0x07464000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_state_on>;
+ pinctrl-1 = <&sdc1_state_off>;
+
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
sdhc2: sdhci@74a4900 {
- status = "disabled";
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
- clock-names = "iface", "core", "xo";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
- bus-width = <4>;
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+
+ bus-width = <4>;
+ status = "disabled";
};
- blsp1_uart1: serial@7570000 {
+ blsp1_dma: dma@7544000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07544000 0x2b000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ qcom,controlled-remotely;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp1_uart2: serial@7570000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x07570000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+ dma-names = "tx", "rx";
status = "disabled";
};
- blsp1_spi0: spi@7575000 {
+ blsp1_spi1: spi@7575000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07575000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -1876,14 +2711,16 @@
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_spi0_default>;
- pinctrl-1 = <&blsp1_spi0_sleep>;
+ pinctrl-0 = <&blsp1_spi1_default>;
+ pinctrl-1 = <&blsp1_spi1_sleep>;
+ dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp1_i2c2: i2c@7577000 {
+ blsp1_i2c3: i2c@7577000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07577000 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -1891,14 +2728,27 @@
<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_i2c2_default>;
- pinctrl-1 = <&blsp1_i2c2_sleep>;
+ pinctrl-0 = <&blsp1_i2c3_default>;
+ pinctrl-1 = <&blsp1_i2c3_sleep>;
+ dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp2_uart1: serial@75b0000 {
+ blsp2_dma: dma@7584000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07584000 0x2b000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ qcom,controlled-remotely;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp2_uart2: serial@75b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x075b0000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -1908,7 +2758,7 @@
status = "disabled";
};
- blsp2_uart2: serial@75b1000 {
+ blsp2_uart3: serial@75b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x075b1000 0x1000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
@@ -1918,7 +2768,7 @@
status = "disabled";
};
- blsp2_i2c0: i2c@75b5000 {
+ blsp2_i2c1: i2c@75b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b5000 0x1000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
@@ -1926,14 +2776,16 @@
<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c0_default>;
- pinctrl-1 = <&blsp2_i2c0_sleep>;
+ pinctrl-0 = <&blsp2_i2c1_default>;
+ pinctrl-1 = <&blsp2_i2c1_sleep>;
+ dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp2_i2c1: i2c@75b6000 {
+ blsp2_i2c2: i2c@75b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b6000 0x1000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -1941,14 +2793,49 @@
<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c1_default>;
- pinctrl-1 = <&blsp2_i2c1_sleep>;
+ pinctrl-0 = <&blsp2_i2c2_default>;
+ pinctrl-1 = <&blsp2_i2c2_sleep>;
+ dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- blsp2_spi5: spi@75ba000{
+ blsp2_i2c5: i2c@75b9000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x75b9000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp2_i2c5_default>;
+ dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_i2c6: i2c@75ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x75ba000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c6_default>;
+ pinctrl-1 = <&blsp2_i2c6_sleep>;
+ dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_spi6: spi@75ba000{
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x075ba000 0x600>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -1956,8 +2843,10 @@
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_spi5_default>;
- pinctrl-1 = <&blsp2_spi5_sleep>;
+ pinctrl-0 = <&blsp2_spi6_default>;
+ pinctrl-1 = <&blsp2_spi6_sleep>;
+ dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1981,14 +2870,16 @@
assigned-clock-rates = <19200000>, <60000000>;
power-domains = <&gcc USB30_GDSC>;
+ qcom,select-utmi-as-pipe-clk;
status = "disabled";
- dwc3@7600000 {
+ usb@7600000 {
compatible = "snps,dwc3";
reg = <0x07600000 0xcc00>;
interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy2>;
phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
};
@@ -2032,13 +2923,13 @@
compatible = "slim217,1a0";
reg = <1 0>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
<53 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr1", "intr2";
interrupt-controller;
#interrupt-cells = <1>;
- reset-gpios = <&msmgpio 64 0>;
+ reset-gpios = <&tlmm 64 0>;
slim-ifc-dev = <&tasha_ifd>;
@@ -2067,6 +2958,11 @@
qcom,smem-states = <&smp2p_adsp_out 0>;
qcom,smem-state-names = "stop";
+ power-domains = <&rpmpd MSM8996_VDDCX>;
+ power-domain-names = "cx";
+
+ status = "disabled";
+
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
@@ -2458,4 +3354,3 @@
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
};
-#include "msm8996-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index e9d3ce2..6f294f9 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1964,7 +1964,7 @@
resets = <&gcc GCC_USB_30_BCR>;
- usb3_dwc3: dwc3@a800000 {
+ usb3_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0x0a800000 0xcd00>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 8ab4f1f..8a4972e 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -7,6 +7,30 @@
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/thermal/thermal.h>
+/ {
+ thermal-zones {
+ pm6150_thermal: pm6150-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm6150_temp>;
+
+ trips {
+ pm6150_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pm6150_crit: crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
&spmi_bus {
pm6150_lsid0: pmic@0 {
compatible = "qcom,pm6150", "qcom,spmi-pmic";
diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi
new file mode 100644
index 0000000..e7f64a9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pm7325: pmic@1 {
+ compatible = "qcom,pm7325", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm7325_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm7325_gpios: gpios@8800 {
+ compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pm7325_gpios 0 0 10>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
+
+&thermal_zones {
+ pm7325_thermal: pm7325-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm7325_temp_alarm>;
+
+ trips {
+ pm7325_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pm7325_crit: pm7325-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index fa4ea7d..c566a64 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -50,7 +50,8 @@
pon: power-on@800 {
compatible = "qcom,pm8916-pon";
reg = <0x0800>;
- pwrkey {
+
+ pon_pwrkey: pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
@@ -59,6 +60,15 @@
status = "disabled";
};
+
+ pon_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+
+ status = "disabled";
+ };
};
pm8150_temp: temp-alarm@2400 {
diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
index 2b9b75e..e1b75ae 100644
--- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -13,13 +13,43 @@
#address-cells = <1>;
#size-cells = <0>;
+ pm8350c_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pm8350c_gpios: gpio@8800 {
- compatible = "qcom,pm8350c-gpio";
+ compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
+ gpio-ranges = <&pm8350c_gpios 0 0 9>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
+
+&thermal_zones {
+ pm8350c_thermal: pm8350c-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8350c_temp_alarm>;
+
+ trips {
+ pm8350c_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pm8350c_crit: pm8350c-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index c3876c8..ad19016 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -45,7 +45,6 @@
pm8994_pon: pon@800 {
compatible = "qcom,pm8916-pon";
-
reg = <0x800>;
mode-bootloader = <0x2>;
mode-recovery = <0x1>;
@@ -58,6 +57,13 @@
linux,code = <KEY_POWER>;
};
+ pm8994_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ status = "disabled";
+ };
};
pm8994_temp: temp-alarm@2400 {
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index e5ed28a..b4ac900 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -32,5 +32,18 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ pmi8994_wled: wled@d800 {
+ compatible = "qcom,pmi8994-wled";
+ reg = <0xd800 0xd900>;
+ interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "short";
+ qcom,num-strings = <3>;
+ /* Yes, all four strings *have to* be defined or things won't work. */
+ qcom,enabled-strings = <0 1 2 3>;
+ qcom,cabc;
+ qcom,eternal-pfet;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1530b8f..04fc263 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -3,6 +3,8 @@
* Copyright (c) 2021, Linaro Limited
*/
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
@@ -13,10 +15,57 @@
#address-cells = <1>;
#size-cells = <0>;
+ pmk8350_pon: pon@1300 {
+ compatible = "qcom,pm8998-pon";
+ reg = <0x1300>;
+
+ pwrkey {
+ compatible = "qcom,pmk8350-pwrkey";
+ interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_POWER>;
+ };
+
+ resin {
+ compatible = "qcom,pmk8350-resin";
+ interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ pmk8350_vadc: adc@3100 {
+ compatible = "qcom,spmi-adc7";
+ reg = <0x3100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eoc-int-en-set";
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ };
+
+ pmk8350_adc_tm: adc-tm@3400 {
+ compatible = "qcom,adc-tm7";
+ reg = <0x3400>;
+ interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "threshold";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
+ pmk8350_rtc: rtc@6100 {
+ compatible = "qcom,pmk8350-rtc";
+ reg = <0x6100>, <0x6200>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
pmk8350_gpios: gpio@b000 {
- compatible = "qcom,pmk8350-gpio";
+ compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
reg = <0xb000>;
gpio-controller;
+ gpio-ranges = <&pmk8350_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
new file mode 100644
index 0000000..7072e5a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+/ {
+ thermal-zones {
+ pmm8155au-1-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pmm8155au_1_temp>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+
+ trip2 {
+ temperature = <145000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+&spmi_bus {
+ pmic@0 {
+ compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pon: power-on@800 {
+ compatible = "qcom,pm8916-pon";
+ reg = <0x0800>;
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+
+ status = "disabled";
+ };
+ };
+
+ pmm8155au_1_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+ io-channels = <&pmm8155au_1_adc ADC5_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmm8155au_1_adc: adc@3100 {
+ compatible = "qcom,spmi-adc5";
+ reg = <0x3100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+ ref-gnd@0 {
+ reg = <ADC5_REF_GND>;
+ qcom,pre-scaling = <1 1>;
+ label = "ref_gnd";
+ };
+
+ vref-1p25@1 {
+ reg = <ADC5_1P25VREF>;
+ qcom,pre-scaling = <1 1>;
+ label = "vref_1p25";
+ };
+
+ die-temp@6 {
+ reg = <ADC5_DIE_TEMP>;
+ qcom,pre-scaling = <1 1>;
+ label = "die_temp";
+ };
+ };
+
+ pmm8155au_1_adc_tm: adc-tm@3500 {
+ compatible = "qcom,spmi-adc-tm5";
+ reg = <0x3500>;
+ interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pmm8155au_1_rtc: rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+
+ status = "disabled";
+ };
+
+ pmm8155au_1_gpios: gpio@c000 {
+ compatible = "qcom,pmm8155au-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmm8155au_1_gpios 0 0 10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pmic@1 {
+ compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
new file mode 100644
index 0000000..7207596
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ thermal-zones {
+ pmm8155au-2-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pmm8155au_2_temp>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+
+ trip2 {
+ temperature = <145000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+&spmi_bus {
+ pmic@4 {
+ compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+ reg = <0x4 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-on@800 {
+ compatible = "qcom,pm8916-pon";
+ reg = <0x0800>;
+
+ status = "disabled";
+ };
+
+ pmm8155au_2_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+ io-channels = <&pmm8155au_2_adc ADC5_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmm8155au_2_adc: adc@3100 {
+ compatible = "qcom,spmi-adc5";
+ reg = <0x3100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+ ref-gnd@0 {
+ reg = <ADC5_REF_GND>;
+ qcom,pre-scaling = <1 1>;
+ label = "ref_gnd";
+ };
+
+ vref-1p25@1 {
+ reg = <ADC5_1P25VREF>;
+ qcom,pre-scaling = <1 1>;
+ label = "vref_1p25";
+ };
+
+ die-temp@6 {
+ reg = <ADC5_DIE_TEMP>;
+ qcom,pre-scaling = <1 1>;
+ label = "die_temp";
+ };
+ };
+
+ pmm8155au_2_gpios: gpio@c000 {
+ compatible = "qcom,pmm8155au-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmm8155au_2_gpios 0 0 10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pmic@5 {
+ compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+ reg = <0x5 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
index 1c675af1..b4b6ba24 100644
--- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
@@ -13,13 +13,43 @@
#address-cells = <1>;
#size-cells = <0>;
+ pmr735a_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pmr735a_gpios: gpio@8800 {
- compatible = "qcom,pmr735a-gpio";
+ compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
+ gpio-ranges = <&pmr735a_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
+
+&thermal_zones {
+ pmr735a_thermal: pmr735a-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmr735a_temp_alarm>;
+
+ trips {
+ pmr735a_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pmr735a_crit: pmr735a-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index a80c578..f8a5530 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -337,7 +337,7 @@
&usb3 {
status = "okay";
- dwc3@7580000 {
+ usb@7580000 {
dr_mode = "host";
};
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 339790b..9c4be020d 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -544,7 +544,7 @@
assigned-clock-rates = <19200000>, <200000000>;
status = "disabled";
- dwc3@7580000 {
+ usb@7580000 {
compatible = "snps,dwc3";
reg = <0x07580000 0xcd00>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -573,7 +573,7 @@
assigned-clock-rates = <19200000>, <133333333>;
status = "disabled";
- dwc3@78c0000 {
+ usb@78c0000 {
compatible = "snps,dwc3";
reg = <0x078c0000 0xcc00>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 5f41de2..8ac96f8 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -5,7 +5,6 @@
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
@@ -552,7 +551,13 @@
vdds-supply = <&vreg_l5a_0p88>;
};
+&gmu {
+ status = "okay";
+};
+
&gpu {
+ status = "okay";
+
zap-shader {
memory-region = <&gpu_mem>;
firmware-name = "qcom/sm8250/a650_zap.mbn";
@@ -664,10 +669,6 @@
&pcie0 {
status = "okay";
- perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_default_state>;
};
&pcie0_phy {
@@ -678,10 +679,6 @@
&pcie1 {
status = "okay";
- perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie1_default_state>;
};
&pcie1_phy {
@@ -692,10 +689,6 @@
&pcie2 {
status = "okay";
- perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie2_default_state>;
};
&pcie2_phy {
@@ -1173,81 +1166,6 @@
bias-disable;
};
- pcie0_default_state: pcie0-default {
- clkreq {
- pins = "gpio80";
- function = "pci_e0";
- bias-pull-up;
- };
-
- reset-n {
- pins = "gpio79";
- function = "gpio";
-
- drive-strength = <2>;
- output-low;
- bias-pull-down;
- };
-
- wake-n {
- pins = "gpio81";
- function = "gpio";
-
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie1_default_state: pcie1-default {
- clkreq {
- pins = "gpio83";
- function = "pci_e1";
- bias-pull-up;
- };
-
- reset-n {
- pins = "gpio82";
- function = "gpio";
-
- drive-strength = <2>;
- output-low;
- bias-pull-down;
- };
-
- wake-n {
- pins = "gpio84";
- function = "gpio";
-
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- pcie2_default_state: pcie2-default {
- clkreq {
- pins = "gpio86";
- function = "pci_e2";
- bias-pull-up;
- };
-
- reset-n {
- pins = "gpio85";
- function = "gpio";
-
- drive-strength = <2>;
- output-low;
- bias-pull-down;
- };
-
- wake-n {
- pins = "gpio87";
- function = "gpio";
-
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
sdc2_default_state: sdc2-default {
clk {
pins = "sdc2_clk";
@@ -1352,6 +1270,10 @@
qcom,dmic-sample-rate = <600000>;
};
+&venus {
+ status = "okay";
+};
+
/* PINCTRL - additions to nodes defined in sm8250.dtsi */
&qup_spi0_cs_gpio {
drive-strength = <6>;
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
new file mode 100644
index 0000000..0da7a3b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pmm8155au_1.dtsi"
+#include "pmm8155au_2.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SA8155P ADP";
+ compatible = "qcom,sa8155p-adp", "qcom,sa8155p";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vreg_3p3: vreg_3p3_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /*
+ * S4A is always on and not controllable through RPMh.
+ * So model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+
+ vin-supply = <&vreg_3p3>;
+ };
+};
+
+&apps_rsc {
+ pmm8155au-1-rpmh-regulators {
+ compatible = "qcom,pmm8155au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vreg_3p3>;
+ vdd-s2-supply = <&vreg_3p3>;
+ vdd-s3-supply = <&vreg_3p3>;
+ vdd-s4-supply = <&vreg_3p3>;
+ vdd-s5-supply = <&vreg_3p3>;
+ vdd-s6-supply = <&vreg_3p3>;
+ vdd-s7-supply = <&vreg_3p3>;
+ vdd-s8-supply = <&vreg_3p3>;
+ vdd-s9-supply = <&vreg_3p3>;
+ vdd-s10-supply = <&vreg_3p3>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
+ vdd-l2-l10-supply = <&vreg_3p3>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
+ vdd-l6-l9-supply = <&vreg_s6a_0p92>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+ vreg_s5a_2p04: smps5 {
+ regulator-name = "vreg_s5a_2p04";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6a_0p92: smps6 {
+ regulator-name = "vreg_s6a_0p92";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_l1a_0p752: ldo1 {
+ regulator-name = "vreg_l1a_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_usb_hs_3p1:
+ vreg_l2a_3p072: ldo2 {
+ regulator-name = "vreg_l2a_3p072";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p8: ldo3 {
+ regulator-name = "vreg_l3a_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_usb_hs_core:
+ vdda_usb_ss_dp_core_1:
+ vreg_l5a_0p88: ldo5 {
+ regulator-name = "vreg_l5a_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-name = "vreg_l7a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p96: ldo10 {
+ regulator-name = "vreg_l10a_2p96";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l11a_0p8: ldo11 {
+ regulator-name = "vreg_l11a_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_usb_hs_1p8:
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p7: ldo13 {
+ regulator-name = "vreg_l13a_2p7";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p7: ldo15 {
+ regulator-name = "vreg_l15a_1p7";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-name = "vreg_l16a_2p7";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_2p96: ldo17 {
+ regulator-name = "vreg_l17a_2p96";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pmm8155au-2-rpmh-regulators {
+ compatible = "qcom,pmm8155au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vreg_3p3>;
+ vdd-s2-supply = <&vreg_3p3>;
+ vdd-s3-supply = <&vreg_3p3>;
+ vdd-s4-supply = <&vreg_3p3>;
+ vdd-s5-supply = <&vreg_3p3>;
+ vdd-s6-supply = <&vreg_3p3>;
+ vdd-s7-supply = <&vreg_3p3>;
+ vdd-s8-supply = <&vreg_3p3>;
+ vdd-s9-supply = <&vreg_3p3>;
+ vdd-s10-supply = <&vreg_3p3>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>;
+ vdd-l2-l10-supply = <&vreg_3p3>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>;
+ vdd-l6-l9-supply = <&vreg_s6c_1p128>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>;
+ vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+ vreg_s4c_1p352: smps4 {
+ regulator-name = "vreg_s4c_1p352";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5c_2p04: smps5 {
+ regulator-name = "vreg_s5c_2p04";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6c_1p128: smps6 {
+ regulator-name = "vreg_s6c_1p128";
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vreg_l1c_1p304: ldo1 {
+ regulator-name = "vreg_l1c_1p304";
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p808: ldo2 {
+ regulator-name = "vreg_l2c_1p808";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p2: ldo5 {
+ regulator-name = "vreg_l5c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7c_1p8: ldo7 {
+ regulator-name = "vreg_l7c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p2: ldo8 {
+ regulator-name = "vreg_l8c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-name = "vreg_l10c_3p3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_0p8: ldo11 {
+ regulator-name = "vreg_l11c_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p808: ldo12 {
+ regulator-name = "vreg_l12c_1p808";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_2p96: ldo13 {
+ regulator-name = "vreg_l13c_2p96";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15c_1p9: ldo15 {
+ regulator-name = "vreg_l15c_1p9";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16c_3p008: ldo16 {
+ regulator-name = "vreg_l16c_3p008";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18c_0p88: ldo18 {
+ regulator-name = "vreg_l18c_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l10a_2p96>;
+ vcc-max-microamp = <750000>;
+ vccq-supply = <&vreg_l5c_1p2>;
+ vccq-max-microamp = <700000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8c_1p2>;
+ vdda-max-microamp = <87100>;
+ vdda-pll-supply = <&vreg_l5a_0p88>;
+ vdda-pll-max-microamp = <18300>;
+};
+
+
+&usb_1_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vdd_usb_hs_core>;
+ vdda33-supply = <&vdda_usb_hs_3p1>;
+ vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l8c_1p2>;
+ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a792..acdb36f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "sc7180.dtsi"
#include "pm6150.dtsi"
#include "pm6150l.dtsi"
@@ -45,7 +46,7 @@
/* Increase the size from 2MB to 8MB */
&rmtfs_mem {
- reg = <0x0 0x84400000 0x0 0x800000>;
+ reg = <0x0 0x94600000 0x0 0x800000>;
};
/ {
@@ -288,6 +289,57 @@
};
};
+&dsi0 {
+ status = "okay";
+
+ vdda-supply = <&vreg_l3c_1p2>;
+
+ panel@0 {
+ compatible = "visionox,rm69299-1080p-display";
+ reg = <0>;
+
+ vdda-supply = <&vreg_l8c_1p8>;
+ vdd3p3-supply = <&vreg_l18a_2p8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&disp_pins>;
+
+ reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&dsi_phy {
+ status = "okay";
+};
+
+&mdp {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
&qfprom {
vcc-supply = <&vreg_l11a_1p8>;
};
@@ -414,6 +466,19 @@
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+&pm6150l_gpio {
+ disp_pins: disp-pins {
+ pinconf {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_FUNC1;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
+ power-source = <0>;
+ bias-disable;
+ output-low;
+ };
+ };
+};
+
&qspi_clk {
pinconf {
pins = "gpio63";
@@ -598,4 +663,106 @@
bias-pull-up;
};
};
+
+ sdc1_on: sdc1-on {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
index 533c048..82dc00c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
@@ -9,8 +9,8 @@
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
- model = "Google CoachZ (rev1) with LTE";
- compatible = "google,coachz-rev1-sku0", "qcom,sc7180";
+ model = "Google CoachZ (rev1 - 2) with LTE";
+ compatible = "google,coachz-rev1-sku0", "google,coachz-rev2-sku0", "qcom,sc7180";
};
&cros_ec_proximity {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
index 1b1dbdb..21b516e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
@@ -10,8 +10,26 @@
#include "sc7180-trogdor-coachz.dtsi"
/ {
- model = "Google CoachZ (rev1)";
- compatible = "google,coachz-rev1", "qcom,sc7180";
+ model = "Google CoachZ (rev1 - 2)";
+ compatible = "google,coachz-rev1", "google,coachz-rev2", "qcom,sc7180";
+};
+
+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
+};
+
+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature,
+ * which currently is not supported by the PM6150 ADC driver. Disable the
+ * skin temperature thermal zone to avoid using bogus temperature values.
+ */
+&skin_temp_thermal {
+ status = "disabled";
};
&tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
similarity index 69%
rename from arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts
rename to arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
index 6e77458..d234090 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
@@ -2,14 +2,14 @@
/*
* Google CoachZ board device tree source
*
- * Copyright 2020 Google LLC.
+ * Copyright 2021 Google LLC.
*/
-#include "sc7180-trogdor-coachz-r2.dts"
+#include "sc7180-trogdor-coachz-r3.dts"
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
- model = "Google CoachZ (rev2+) with LTE";
+ model = "Google CoachZ (rev3+) with LTE";
compatible = "google,coachz-sku0", "qcom,sc7180";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
similarity index 75%
rename from arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts
rename to arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
index 4f69b6b..a02d2d57 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
@@ -2,7 +2,7 @@
/*
* Google CoachZ board device tree source
*
- * Copyright 2020 Google LLC.
+ * Copyright 2021 Google LLC.
*/
/dts-v1/;
@@ -10,6 +10,6 @@
#include "sc7180-trogdor-coachz.dtsi"
/ {
- model = "Google CoachZ (rev2+)";
+ model = "Google CoachZ (rev3+)";
compatible = "google,coachz", "qcom,sc7180";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 4c6e433..6f9c071 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -23,8 +23,53 @@
adau7002: audio-codec-1 {
compatible = "adi,adau7002";
IOVDD-supply = <&pp1800_l15a>;
+ wakeup-delay-ms = <15>;
#sound-dai-cells = <0>;
};
+
+ thermal-zones {
+ skin_temp_thermal: skin-temp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm6150_adc_tm 1>;
+ sustainable-power = <814>;
+
+ trips {
+ skin_temp_alert0: trip-point0 {
+ temperature = <42000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin_temp_alert1: trip-point1 {
+ temperature = <45000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin-temp-crit {
+ temperature = <60000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&skin_temp_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&skin_temp_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
&ap_spi_fp {
@@ -77,6 +122,25 @@
compatible = "boe,nv110wtm-n61";
};
+&pm6150_adc {
+ skin-temp-thermistor@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm6150_adc_tm {
+ status = "okay";
+
+ skin-temp-thermistor@1 {
+ reg = <1>;
+ io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pp3300_dx_edp {
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index 5c997cd..30e3e769 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -14,15 +14,6 @@
compatible = "google,lazor-rev0", "qcom,sc7180";
};
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
-
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index d9fbcc7..c2ef063 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -14,15 +14,6 @@
compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
};
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
-
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
index ea8c2ee..b474df4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
@@ -14,12 +14,3 @@
model = "Google Lazor (rev3+)";
compatible = "google,lazor", "qcom,sc7180";
};
-
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 6b10b96..00535aa 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -21,6 +21,15 @@
semtech,avg-pos-strength = <64>;
};
+/*
+ * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
+ * not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
+};
+
ap_ts_pen_1v8: &i2c4 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
index e720e7b..e122a6b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
@@ -9,11 +9,23 @@
#include "sc7180-trogdor-pompom.dtsi"
+/delete-node/ &keyboard_controller;
+#include <arm/cros-ec-keyboard.dtsi>
+
/ {
model = "Google Pompom (rev1)";
compatible = "google,pompom-rev1", "qcom,sc7180";
};
+/*
+ * Pompom rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
+};
+
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
index 791d496..00e187c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
@@ -9,6 +9,6 @@
#include "sc7180-trogdor-lte-sku.dtsi"
/ {
- model = "Google Pompom (rev2+) with LTE";
- compatible = "google,pompom-sku0", "qcom,sc7180";
+ model = "Google Pompom (rev2) with LTE";
+ compatible = "google,pompom-rev2-sku0", "qcom,sc7180";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
index 984d733..4f32e67 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
@@ -10,35 +10,15 @@
#include "sc7180-trogdor-pompom.dtsi"
/ {
- model = "Google Pompom (rev2+)";
- compatible = "google,pompom", "qcom,sc7180";
+ model = "Google Pompom (rev2)";
+ compatible = "google,pompom-rev2", "qcom,sc7180";
};
-&keyboard_controller {
- function-row-physmap = <
- MATRIX_KEY(0x00, 0x02, 0) /* T1 */
- MATRIX_KEY(0x03, 0x02, 0) /* T2 */
- MATRIX_KEY(0x02, 0x02, 0) /* T3 */
- MATRIX_KEY(0x01, 0x02, 0) /* T4 */
- MATRIX_KEY(0x03, 0x04, 0) /* T5 */
- MATRIX_KEY(0x02, 0x04, 0) /* T6 */
- MATRIX_KEY(0x01, 0x04, 0) /* T7 */
- MATRIX_KEY(0x02, 0x09, 0) /* T8 */
- MATRIX_KEY(0x01, 0x09, 0) /* T9 */
- MATRIX_KEY(0x00, 0x04, 0) /* T10 */
- >;
- linux,keymap = <
- MATRIX_KEY(0x00, 0x02, KEY_BACK)
- MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
- MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
- MATRIX_KEY(0x01, 0x02, KEY_SCALE)
- MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
- MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
- MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
- MATRIX_KEY(0x02, 0x09, KEY_MUTE)
- MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
- MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
-
- CROS_STD_MAIN_KEYMAP
- >;
+/*
+ * Pompom rev2 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
new file mode 100644
index 0000000..e90b73c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r3.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pompom (rev3+) with LTE";
+ compatible = "google,pompom-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
new file mode 100644
index 0000000..f8aac63
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/ {
+ model = "Google Pompom (rev3+)";
+ compatible = "google,pompom", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index 622b5f1..a246dbd 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -107,6 +107,35 @@
};
};
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
&panel {
compatible = "kingdisplay,kd116n21-30nv-a010";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 24d293e..77ae756 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -64,11 +64,6 @@
no-map;
};
- camera_mem: memory@8ec00000 {
- reg = <0x0 0x8ec00000 0x0 0x500000>;
- no-map;
- };
-
venus_mem: memory@8f600000 {
reg = <0 0x8f600000 0 0x500000>;
no-map;
@@ -335,8 +330,7 @@
compatible = "jedec,spi-nor";
reg = <0>;
- /* TODO: Increase frequency after testing */
- spi-max-frequency = <25000000>;
+ spi-max-frequency = <37500000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
};
@@ -564,10 +558,6 @@
#size-cells = <0>;
};
- pdupdate {
- compatible = "google,cros-ec-pd-update";
- };
-
typec {
compatible = "google,cros-ec-typec";
#address-cells = <1>;
@@ -655,6 +645,8 @@
clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
clock-names = "refclk";
+ no-hpd;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -772,7 +764,7 @@
qcom,capture-sd-lines = <0>;
};
- mi2s@1 {
+ secondary_mi2s: mi2s@1 {
reg = <MI2S_SECONDARY>;
qcom,playback-sd-lines = <0>;
};
@@ -805,7 +797,7 @@
};
};
-&pm6150_pwrkey {
+&pm6150_pon {
status = "disabled";
};
@@ -981,6 +973,7 @@
&qspi_clk {
pinconf {
pins = "gpio63";
+ drive-strength = <8>;
bias-disable;
};
};
@@ -1494,4 +1487,106 @@
drive-strength = <2>;
};
};
+
+ sdc1_on: sdc1-on {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6228ba2..a5d58eb 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -701,8 +701,9 @@
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>;
- clock-names = "core", "iface";
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "core", "iface", "xo";
interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
@@ -726,15 +727,15 @@
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
- opp-peak-kBps = <100000 100000>;
- opp-avg-kBps = <100000 50000>;
+ opp-peak-kBps = <1800000 600000>;
+ opp-avg-kBps = <100000 0>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- opp-peak-kBps = <600000 900000>;
- opp-avg-kBps = <261438 300000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <5400000 1600000>;
+ opp-avg-kBps = <390000 0>;
};
};
};
@@ -768,8 +769,6 @@
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x43 0x0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>;
- interconnect-names = "qup-core";
status = "disabled";
i2c0: i2c@880000 {
@@ -1059,8 +1058,6 @@
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x4c3 0x0>;
- interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>;
- interconnect-names = "qup-core";
status = "disabled";
i2c6: i2c@a80000 {
@@ -1871,108 +1868,6 @@
function = "lpass_ext";
};
};
-
- sdc1_on: sdc1-on {
- pinconf-clk {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- pinconf-cmd {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-data {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-rclk {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- sdc1_off: sdc1-off {
- pinconf-clk {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- pinconf-cmd {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-data {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-rclk {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
- };
-
- sdc2_on: sdc2-on {
- pinconf-clk {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- pinconf-cmd {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-data {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- pinconf-sd-cd {
- pins = "gpio69";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
-
- sdc2_off: sdc2-off {
- pinconf-clk {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- pinconf-cmd {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-data {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf-sd-cd {
- pins = "gpio69";
- bias-disable;
- drive-strength = <2>;
- };
- };
};
remoteproc_mpss: remoteproc@4080000 {
@@ -2670,8 +2565,9 @@
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>;
- clock-names = "core", "iface";
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "core", "iface", "xo";
interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
@@ -2689,15 +2585,15 @@
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
- opp-peak-kBps = <160000 100000>;
- opp-avg-kBps = <80000 50000>;
+ opp-peak-kBps = <1800000 600000>;
+ opp-avg-kBps = <100000 0>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- opp-peak-kBps = <200000 120000>;
- opp-avg-kBps = <100000 60000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <5400000 1600000>;
+ opp-avg-kBps = <200000 0>;
};
};
};
@@ -2754,8 +2650,8 @@
usb_1_qmpphy: phy-wrapper@88e9000 {
compatible = "qcom,sc7180-qmp-usb3-dp-phy";
reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x38>,
- <0 0x088ea000 0 0x40>;
+ <0 0x088e8000 0 0x3c>,
+ <0 0x088ea000 0 0x18c>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
@@ -2860,7 +2756,7 @@
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 54d2cb3..3900cfc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -7,11 +7,19 @@
/dts-v1/;
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pmr735a.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
/ {
model = "Qualcomm Technologies, Inc. sc7280 IDP platform";
- compatible = "qcom,sc7280-idp", "qcom,sc7280";
+ compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280";
aliases {
serial0 = &uart5;
@@ -234,6 +242,32 @@
};
};
+&pmk8350_vadc {
+ pm8350_die_temp {
+ reg = <PM8350_ADC7_DIE_TEMP>;
+ label = "pm8350_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pmk8350_die_temp {
+ reg = <PMK8350_ADC7_DIE_TEMP>;
+ label = "pmk8350_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pmr735a_die_temp {
+ reg = <PMR735A_ADC7_DIE_TEMP>;
+ label = "pmr735a_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pmr735b_die_temp {
+ reg = <PMR735B_ADC7_DIE_TEMP>;
+ label = "pmr735b_die_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 2cc4785..a8c274a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -11,7 +11,10 @@
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -51,6 +54,11 @@
no-map;
};
+ smem_mem: memory@80900000 {
+ reg = <0x0 0x80900000 0x0 0x200000>;
+ no-map;
+ };
+
cpucp_mem: memory@80b00000 {
no-map;
reg = <0x0 0x80b00000 0x0 0x100000>;
@@ -70,6 +78,8 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -88,6 +98,8 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -103,6 +115,8 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -118,6 +132,8 @@
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -133,6 +149,8 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -148,6 +166,8 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -163,6 +183,8 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -178,6 +200,8 @@
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -251,6 +275,125 @@
};
};
+ clk_virt: interconnect {
+ compatible = "qcom,sc7280-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-wpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <617>, <616>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <13>;
+
+ wpss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wpss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -316,6 +459,93 @@
};
};
+ cnoc2: interconnect@1500000 {
+ reg = <0 0x01500000 0 0x1000>;
+ compatible = "qcom,sc7280-cnoc2";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ cnoc3: interconnect@1502000 {
+ reg = <0 0x01502000 0 0x1000>;
+ compatible = "qcom,sc7280-cnoc3";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect@1580000 {
+ reg = <0 0x01580000 0 0x4>;
+ compatible = "qcom,sc7280-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ system_noc: interconnect@1680000 {
+ reg = <0 0x01680000 0 0x15480>;
+ compatible = "qcom,sc7280-system-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sc7280-aggre1-noc";
+ reg = <0 0x016e0000 0 0x1c080>;
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ reg = <0 0x01700000 0 0x2b080>;
+ compatible = "qcom,sc7280-aggre2-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mmss_noc: interconnect@1740000 {
+ reg = <0 0x01740000 0 0x1e080>;
+ compatible = "qcom,sc7280-mmss-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex", "syscon";
+ reg = <0 0x01f40000 0 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ lpasscc: lpasscc@3000000 {
+ compatible = "qcom,sc7280-lpasscc";
+ reg = <0 0x03000000 0 0x40>,
+ <0 0x03c04000 0 0x4>,
+ <0 0x03389000 0 0x24>;
+ reg-names = "qdsp6ss", "top_cc", "cc";
+ clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+ clock-names = "iface";
+ #clock-cells = <1>;
+ };
+
+ lpass_ag_noc: interconnect@3c40000 {
+ reg = <0 0x03c40000 0 0xf080>;
+ compatible = "qcom,sc7280-lpass-ag-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sc7280-gpucc";
+ reg = <0 0x03d90000 0 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "gcc_gpu_gpll0_clk_src",
+ "gcc_gpu_gpll0_div_clk_src";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0 0x06002000 0 0x1000>,
@@ -805,6 +1035,20 @@
};
};
+ dc_noc: interconnect@90e0000 {
+ reg = <0 0x090e0000 0 0x5080>;
+ compatible = "qcom,sc7280-dc-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ gem_noc: interconnect@9100000 {
+ reg = <0 0x9100000 0 0xe2200>;
+ compatible = "qcom,sc7280-gem-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
system-cache-controller@9200000 {
compatible = "qcom,sc7280-llcc";
reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>;
@@ -812,6 +1056,42 @@
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
+ nsp_noc: interconnect@a0c0000 {
+ reg = <0 0x0a0c0000 0 0x10000>;
+ compatible = "qcom,sc7280-nsp-noc";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ videocc: clock-controller@aaf0000 {
+ compatible = "qcom,sc7280-videocc";
+ reg = <0 0xaaf0000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sc7280-dispcc";
+ reg = <0 0xaf00000 0 0x20000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <0>, <0>, <0>, <0>, <0>, <0>;
+ clock-names = "bi_tcxo", "gcc_disp_gpll0_clk",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk",
+ "edp_phy_pll_link_clk",
+ "edp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7280-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
@@ -825,6 +1105,40 @@
interrupt-controller;
};
+ pdc_reset: reset-controller@b5e0000 {
+ compatible = "qcom,sc7280-pdc-global";
+ reg = <0 0x0b5e0000 0 0x20000>;
+ #reset-cells = <1>;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <15>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow","critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <12>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow","critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_reset: reset-controller@c2a0000 {
+ compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc";
+ reg = <0 0x0c2a0000 0 0x31000>;
+ #reset-cells = <1>;
+ };
+
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sc7280-aoss-qmp";
reg = <0 0x0c300000 0 0x100000>;
@@ -1063,6 +1377,10 @@
<WAKE_TCS 3>,
<CONTROL_TCS 1>;
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
rpmhpd: power-controller {
compatible = "qcom,sc7280-rpmhpd";
#power-domain-cells = <1>;
@@ -1116,6 +1434,859 @@
#clock-cells = <1>;
};
};
+
+ cpufreq_hw: cpufreq@18591000 {
+ compatible = "qcom,cpufreq-epss";
+ reg = <0 0x18591000 0 0x1000>,
+ <0 0x18592000 0 0x1000>,
+ <0 0x18593000 0 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+ clock-names = "xo", "alternate";
+ #freq-domain-cells = <1>;
+ };
+ };
+
+ thermal_zones: thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu3_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu4_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu4_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu4_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu5_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu5_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu5_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu6_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu6_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu6_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu7_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu7_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu7_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu8-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu8_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu8_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu8_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu8_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu8_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu9-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cpu9_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu9_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu9_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu9_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu9_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu10-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ cpu10_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu10_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu10_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu10_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu10_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu11-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ cpu11_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu11_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu11_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu11_alert0>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu11_alert1>;
+ cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ aoss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss0_crit: aoss0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ aoss1_crit: aoss1-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpuss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpuss0_crit: cluster0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpuss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpuss1_crit: cluster0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ gpuss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss0_crit: gpuss0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ gpuss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpuss1_crit: gpuss1-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nspss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ nspss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nspss0_crit: nspss0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nspss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ nspss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ nspss1_crit: nspss1-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ video_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ video_crit: video-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ ddr_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ ddr_crit: ddr-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdmss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ mdmss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mdmss0_crit: mdmss0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdmss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ mdmss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mdmss1_crit: mdmss1-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdmss2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ mdmss2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mdmss2_crit: mdmss2-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdmss3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ mdmss3_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ mdmss3_crit: mdmss3-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 11>;
+
+ trips {
+ camera0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ camera0_crit: camera0-crit {
+ temperature = <110000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
};
timer {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 216a74f..dfd1b42 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -714,10 +714,6 @@
#address-cells = <1>;
#size-cells = <0>;
};
-
- pdupdate {
- compatible = "google,cros-ec-pd-update";
- };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 1372fe8..91ede92 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -448,6 +448,11 @@
clock-frequency = <400000>;
};
+&ipa {
+ status = "okay";
+ memory-region = <&ipa_fw_mem>;
+};
+
&mdss {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 8f617f7..4d052e3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -46,6 +46,14 @@
};
reserved-memory {
+ /* The rmtfs_mem needs to be guarded due to "XPU limitations"
+ * it is otherwise possible for an allocation adjacent to the
+ * rmtfs_mem region to trigger an XPU violation, causing a crash.
+ */
+ rmtfs_lower_guard: memory@f5b00000 {
+ no-map;
+ reg = <0 0xf5b00000 0 0x1000>;
+ };
/*
* The rmtfs memory region in downstream is 'dynamically allocated'
* but given the same address every time. Hard code it as this address is
@@ -59,6 +67,10 @@
qcom,client-id = <1>;
qcom,vmid = <15>;
};
+ rmtfs_upper_guard: memory@f5d01000 {
+ no-map;
+ reg = <0 0xf5d01000 0 0x2000>;
+ };
/*
* It seems like reserving the old rmtfs_mem region is also needed to prevent
@@ -387,6 +399,12 @@
};
};
+&ipa {
+ status = "okay";
+
+ memory-region = <&ipa_fw_mem>;
+};
+
&mdss {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index 7d02942..c60c8c6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -5,6 +5,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include "sdm845.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
@@ -311,6 +313,28 @@
};
};
+/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
+&q6afedai {
+ qi2s@22 {
+ reg = <22>;
+ qcom,sd-lines = <0>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -328,6 +352,70 @@
cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
};
+&sound {
+ compatible = "qcom,db845c-sndcard";
+ pinctrl-0 = <&quat_mi2s_active
+ &quat_mi2s_sd0_active>;
+ pinctrl-names = "default";
+ model = "Xiaomi Poco F1";
+ audio-routing =
+ "RX_BIAS", "MCLK",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "AMIC3", "MIC BIAS3";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 0>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 1>;
+ };
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
@@ -356,6 +444,15 @@
function = "gpio";
bias-pull-up;
};
+
+ wcd_intr_default: wcd_intr_default {
+ pins = <54>;
+ function = "gpio";
+
+ input-enable;
+ bias-pull-down;
+ drive-strength = <2>;
+ };
};
&uart6 {
@@ -416,6 +513,23 @@
vdda-pll-supply = <&vreg_l1a_0p875>;
};
+&wcd9340{
+ pinctrl-0 = <&wcd_intr_default>;
+ pinctrl-names = "default";
+ clock-names = "extclk";
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ reset-gpios = <&tlmm 64 0>;
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+ qcom,micbias1-microvolt = <2700000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <2700000>;
+ qcom,micbias4-microvolt = <2700000>;
+};
+
&wifi {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0a86fe7..1796ae8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3781,7 +3781,7 @@
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -3829,7 +3829,7 @@
<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_2_dwc3: dwc3@a800000 {
+ usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 140db2d..c2a709a 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -376,6 +376,8 @@
clocks = <&sn65dsi86_refclk>;
clock-names = "refclk";
+ no-hpd;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index fb2cf3d..335aa07 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -354,22 +354,26 @@
};
};
-&qupv3_id_1 {
+&gmu {
status = "okay";
};
-&pon {
- pwrkey {
- status = "okay";
- };
+&gpu {
+ status = "okay";
+};
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+ status = "okay";
};
&remoteproc_adsp {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
new file mode 100644
index 0000000..736da9a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2021, Microsoft Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+ model = "Microsoft Surface Duo";
+ compatible = "microsoft,surface-duo", "qcom,sm8150";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8150 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8150-s4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ vol_up {
+ label = "Volume Up";
+ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+};
+
+&apps_rsc {
+ pm8150-rpmh-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+ vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ vreg_s5a_2p0: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6a_0p9: smps6 {
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vdda_wcss_pll:
+ vreg_l1a_0p75: ldo1 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_pdphy:
+ vdda_usb_hs_3p1:
+ vreg_l2a_3p1: ldo2 {
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p8: ldo3 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_usb_hs_core:
+ vdda_csi_0_0p9:
+ vdda_csi_1_0p9:
+ vdda_csi_2_0p9:
+ vdda_csi_3_0p9:
+ vdda_dsi_0_0p9:
+ vdda_dsi_1_0p9:
+ vdda_dsi_0_pll_0p9:
+ vdda_dsi_1_pll_0p9:
+ vdda_pcie_1ln_core:
+ vdda_pcie_2ln_core:
+ vdda_pll_hv_cc_ebi01:
+ vdda_pll_hv_cc_ebi23:
+ vdda_qrefs_0p875_5:
+ vdda_sp_sensor:
+ vdda_ufs_2ln_core_1:
+ vdda_ufs_2ln_core_2:
+ vdda_usb_ss_dp_core_1:
+ vdda_usb_ss_dp_core_2:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vreg_l5a_0p875: ldo5 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ vreg_l9a_1p2: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p5: ldo10 {
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_0p8: ldo11 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_usb_hs_1p8:
+ vdda_qrefs_vref_1p8:
+ vddpx_10_a:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p7: ldo13 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p7: ldo15 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8150l-rpmh-regulators {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+
+ vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+ vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+
+ vdd-bob-supply = <&vph_pwr>;
+ vdd-flash-supply = <&vreg_bob>;
+ vdd-rgb-supply = <&vreg_bob>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+
+ vreg_s8c_1p3: smps8 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_wcss_adcdac_1:
+ vdda_wcss_adcdac_22:
+ vreg_l2c_1p3: ldo2 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_hv_refgen0:
+ vdda_qlink_hv_ck:
+ vreg_l3c_1p2: ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_5:
+ vreg_l4c_1p8: ldo4 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_6:
+ vreg_l5c_1p8: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l6c_2p9: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p3: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8009-rpmh-regulators {
+ compatible = "qcom,pm8009-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vreg_bob>;
+
+ vdd-l2-supply = <&vreg_s8c_1p3>;
+ vdd-l5-l6-supply = <&vreg_bob>;
+
+ vreg_l2f_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5f_2p85: ldo5 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6f_2p85: ldo6 {
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <2856000>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ bq27742@55 {
+ compatible = "ti,bq27742";
+ reg = <0x55>;
+ };
+
+ da7280@4a {
+ compatible = "dlg,da7280";
+ reg = <0x4a>;
+ interrupts-extended = <&tlmm 42 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "da7280_default";
+ pinctrl-0 = <&da7280_intr_default>;
+
+ dlg,actuator-type = "LRA";
+ dlg,dlg,const-op-mode = <1>;
+ dlg,dlg,periodic-op-mode = <1>;
+ dlg,nom-microvolt = <2000000>;
+ dlg,abs-max-microvolt = <2000000>;
+ dlg,imax-microamp = <129000>;
+ dlg,resonant-freq-hz = <180>;
+ dlg,impd-micro-ohms = <14300000>;
+ dlg,freq-track-enable;
+ dlg,bemf-sens-enable;
+ dlg,mem-array = <
+ 0x06 0x08 0x10 0x11 0x12 0x13 0x14 0x15 0x1c 0x2a
+ 0x33 0x3c 0x42 0x4b 0x4c 0x4e 0x17 0x19 0x27 0x29
+ 0x17 0x19 0x03 0x84 0x5e 0x04 0x08 0x84 0x5d 0x01
+ 0x84 0x5e 0x02 0x00 0xa4 0x5d 0x03 0x84 0x5e 0x06
+ 0x08 0x84 0x5d 0x05 0x84 0x5d 0x06 0x84 0x5e 0x08
+ 0x84 0x5e 0x05 0x8c 0x5e 0x24 0x84 0x5f 0x10 0x84
+ 0x5e 0x05 0x84 0x5e 0x08 0x84 0x5f 0x01 0x8c 0x5e
+ 0x04 0x84 0x5e 0x08 0x84 0x5f 0x11 0x19 0x88 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+ >;
+ };
+
+ /* SMB1381 @ 0x44 */
+ /* MAX34417 @ 0x1c */
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* SMB1355 @ 0x0c */
+ /* SMB1390 @ 0x10 */
+};
+
+&i2c17 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ bq27742@55 {
+ compatible = "ti,bq27742";
+ reg = <0x55>;
+ };
+};
+
+&i2c19 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* MAX34417 @ 0x12 */
+ /* MAX34417 @ 0x1a */
+ /* MAX34417 @ 0x1e */
+};
+
+&pon {
+ pwrkey {
+ status = "okay";
+ };
+
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ status = "okay";
+ firmware-name = "qcom/sm8150/microsoft/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+ status = "okay";
+ firmware-name = "qcom/sm8150/microsoft/cdsp.mdt";
+};
+
+&remoteproc_mpss {
+ status = "okay";
+ firmware-name = "qcom/sm8150/microsoft/modem.mdt";
+};
+
+&remoteproc_slpi {
+ status = "okay";
+ firmware-name = "qcom/sm8150/microsoft/slpi.mdt";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <126 4>;
+
+ da7280_intr_default: da7280-intr-default {
+ pins = "gpio42";
+ function = "gpio";
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l10a_2p5>;
+ vcc-max-microamp = <750000>;
+ vccq-supply = <&vreg_l9a_1p2>;
+ vccq-max-microamp = <700000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+ vdda-max-microamp = <90200>;
+ vdda-pll-supply = <&vreg_l3c_1p2>;
+ vdda-pll-max-microamp = <19000>;
+};
+
+&usb_1_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vdd_usb_hs_core>;
+ vdda33-supply = <&vdda_usb_hs_3p1>;
+ vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>;
+ vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 3774f8e..53edf754 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -349,22 +349,26 @@
};
};
-&qupv3_id_1 {
+&gmu {
status = "okay";
};
-&pon {
- pwrkey {
- status = "okay";
- };
+&gpu {
+ status = "okay";
+};
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+ status = "okay";
};
&remoteproc_adsp {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts
new file mode 100644
index 0000000..3b55fdd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8150-sony-xperia-kumano.dtsi"
+
+/ {
+ model = "Sony Xperia 5";
+ compatible = "sony,bahamut-generic", "qcom,sm8150";
+};
+
+&framebuffer {
+ width = <1080>;
+ height = <2520>;
+ stride = <(1080 * 4)>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts
new file mode 100644
index 0000000..6f490ec2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8150-sony-xperia-kumano.dtsi"
+
+/ {
+ model = "Sony Xperia 1";
+ compatible = "sony,griffin-generic", "qcom,sm8150";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
new file mode 100644
index 0000000..014fe3a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &venus_mem;
+
+/ {
+ qcom,msm-id = <339 0x20000>; /* SM8150 v2 */
+ qcom,board-id = <8 0>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@9c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x9c000000 0 0x2300000>;
+ width = <1644>;
+ height = <3840>;
+ stride = <(1644 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's (going to be) a lot of clocks, but it's necessary due
+ * to unused clk cleanup & no panel driver yet (& no dispcc either)..
+ */
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8150 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8150-s4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ reserved-memory {
+ mpss_mem: memory@8dc00000 {
+ reg = <0x0 0x8dc00000 0x0 0x9600000>;
+ no-map;
+ };
+
+ venus_mem: memory@97200000 {
+ reg = <0x0 0x97200000 0x0 0x500000>;
+ no-map;
+ };
+
+ slpi_mem: memory@97700000 {
+ reg = <0x0 0x97700000 0x0 0x1400000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@98b00000 {
+ reg = <0x0 0x98b00000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@98b10000 {
+ reg = <0x0 0x98b10000 0x0 0x5000>;
+ no-map;
+ };
+
+ gpu_mem: memory@98b15000 {
+ reg = <0x0 0x98b15000 0x0 0x2000>;
+ no-map;
+ };
+
+ spss_mem: memory@98c00000 {
+ reg = <0x0 0x98c00000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@98d00000 {
+ reg = <0x0 0x98d00000 0x0 0x1400000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@9c000000 {
+ reg = <0x0 0x9c000000 0x0 0x2400000>;
+ no-map;
+ };
+
+ cdsp_sec_mem: memory@a4c00000 {
+ reg = <0x0 0xa4c00000 0x0 0x3c00000>;
+ no-map;
+ };
+
+ ramoops@ffc00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffc00000 0x0 0x100000>;
+ record-size = <0x1000>;
+ console-size = <0x40000>;
+ msg-size = <0x20000 0x20000>;
+ ecc-size = <16>;
+ no-map;
+ };
+ };
+};
+
+&adsp_mem {
+ reg = <0x0 0x8be00000 0x0 0x1e00000>;
+};
+
+&apps_rsc {
+ pm8150-rpmh-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+ vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ vreg_s2a_0p6: smps2 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a_1p9: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6a_0p9: smps6 {
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1a_0p75: ldo1 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_3p1: ldo2 {
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p8: ldo3 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_0p875: ldo5 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p2: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p5: ldo10 {
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_0p8: ldo11 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L13 is unused. */
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p7: ldo15 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_0p8: ldo18 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8150l-rpmh-regulators {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+
+ vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+ vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+
+ vdd-bob-supply = <&vph_pwr>;
+ vdd-flash-supply = <&vreg_bob>;
+ vdd-rgb-supply = <&vreg_bob>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3350000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+
+ vreg_s1c_1p1: smps1 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s8c_1p3: smps8 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p3: ldo2 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_1p2: ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p8: ldo4 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p9: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p3: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* PM8009 is not present on these boards, even if downstream sources suggest so. */
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* Qcom SMB1355 @ c */
+ /* Qcom SMB1390 @ 10 */
+ /* NXP PN553 NFC @ 28 */
+ /* Qcom FSA4480 USB-C audio switch @ 43 */
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c10 {
+ status = "okay";
+
+ /* Samsung touchscreen @ 48 */
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <126 4>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vreg_l5a_0p875>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vreg_l18a_0p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 51235a9..612dda0 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -4,6 +4,7 @@
* Copyright (c) 2019, Linaro Limited
*/
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -577,6 +578,29 @@
<&sleep_clk>;
};
+ gpi_dma0: dma-controller@800000 {
+ compatible = "qcom,sm8150-gpi-dma";
+ reg = <0 0x800000 0 0x60000>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ iommus = <&apps_smmu 0x00d6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -695,6 +719,29 @@
};
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sm8150-gpi-dma";
+ reg = <0 0xa00000 0 0x60000>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ iommus = <&apps_smmu 0x0616 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -795,6 +842,29 @@
};
};
+ gpi_dma2: dma-controller@c00000 {
+ compatible = "qcom,sm8150-gpi-dma";
+ reg = <0 0xc00000 0 0x60000>;
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ iommus = <&apps_smmu 0x07b6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_2: geniqup@cc0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00cc0000 0x0 0x6000>;
@@ -1082,6 +1152,8 @@
qcom,gmu = <&gmu>;
+ status = "disabled";
+
zap-shader {
memory-region = <&gpu_mem>;
};
@@ -1149,6 +1221,8 @@
operating-points-v2 = <&gmu_opp_table>;
+ status = "disabled";
+
gmu_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -1496,6 +1570,8 @@
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
+ status = "disabled";
+
glink-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
@@ -2268,7 +2344,7 @@
resets = <&gcc GCC_USB30_PRIM_BCR>;
- usb_1_dwc3: dwc3@a600000 {
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
index c3a2c5a..4774281 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
@@ -6,7 +6,6 @@
/dts-v1/;
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include <dt-bindings/gpio/gpio.h>
#include "sm8250.dtsi"
#include "pm8150.dtsi"
#include "pm8150b.dtsi"
@@ -365,22 +364,26 @@
};
};
-&qupv3_id_1 {
+&gmu {
status = "okay";
};
-&pon {
- pwrkey {
- status = "okay";
- };
+&gpu {
+ status = "okay";
+};
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+ status = "okay";
};
&tlmm {
@@ -452,3 +455,7 @@
&usb_2_dwc3 {
dr_mode = "host";
};
+
+&venus {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index cfc4d1f..062b944 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -465,7 +465,13 @@
firmware-name = "qcom/sm8250/cdsp.mbn";
};
+&gmu {
+ status = "okay";
+};
+
&gpu {
+ status = "okay";
+
zap-shader {
memory-region = <&gpu_mem>;
firmware-name = "qcom/sm8250/a650_zap.mbn";
@@ -691,3 +697,7 @@
vdda-phy-supply = <&vreg_l9a_1p2>;
vdda-pll-supply = <&vreg_l18a_0p9>;
};
+
+&venus {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
new file mode 100644
index 0000000..79afeb0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8250-sony-xperia-edo.dtsi"
+
+/ {
+ model = "Sony Xperia 1 II";
+ compatible = "sony,pdx203-generic", "qcom,sm8250";
+};
+
+/delete-node/ &vreg_l7f_1p8;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
new file mode 100644
index 0000000..16c96e8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8250-sony-xperia-edo.dtsi"
+
+/ {
+ model = "Sony Xperia 5 II";
+ compatible = "sony,pdx206-generic", "qcom,sm8250";
+};
+
+&framebuffer {
+ width = <1080>;
+ height = <2520>;
+ stride = <(1080 * 4)>;
+};
+
+&gpio_keys {
+ g-assist-key {
+ label = "Google Assistant Key";
+ linux,code = <KEY_LEFTMETA>;
+ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+};
+
+&vreg_l2f_1p3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
new file mode 100644
index 0000000..d63f7a9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &cdsp_secure_heap;
+
+/ {
+ qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
+ qcom,board-id = <0x10008 0>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@9c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x9c000000 0 0x2300000>;
+ width = <1644>;
+ height = <3840>;
+ stride = <(1644 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's a lot of clocks, but it's necessary due
+ * to unused clk cleanup & no panel driver yet..
+ */
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>;
+ power-domains = <&dispcc MDSS_GDSC>;
+ };
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ /*
+ * Camera focus (light press) and camera snapshot (full press)
+ * seem not to work properly.. Adding the former one stalls the CPU
+ * and the latter kills the volume down key for whatever reason. In any
+ * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
+ */
+
+ vol-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+ vreg_s6c_0p88: smpc6-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s6c_0p88";
+
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-always-on;
+ vin-supply = <&vph_pwr>;
+ };
+
+ reserved-memory {
+ adsp_mem: memory@8a100000 {
+ reg = <0x0 0x8a100000 0x0 0x2500000>;
+ no-map;
+ };
+
+ spss_mem: memory@8c600000 {
+ reg = <0x0 0x8c600000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap: memory@8c700000 {
+ reg = <0x0 0x8c700000 0x0 0x4600000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@9c000000 {
+ reg = <0x0 0x9c000000 0x0 0x2300000>;
+ no-map;
+ };
+
+ ramoops@ffc00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffc00000 0x0 0x100000>;
+ record-size = <0x1000>;
+ console-size = <0x40000>;
+ msg-size = <0x20000 0x20000>;
+ ecc-size = <16>;
+ no-map;
+ };
+ };
+};
+
+&adsp {
+ status = "okay";
+};
+
+&apps_rsc {
+ pm8150-rpmh-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>;
+ vdd-l6-l9-supply = <&vreg_s8c_1p2>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ /* (S1+S2+S3) - cx.lvl (ARC) */
+
+ vreg_s4a_1p8: smps4 {
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a_1p9: smps5 {
+ regulator-name = "vreg_s5a_1p9";
+ regulator-min-microvolt = <1824000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6a_0p6: smps6 {
+ regulator-name = "vreg_s6a_0p6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_3p1: ldo2 {
+ regulator-name = "vreg_l2a_3p1";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p9: ldo3 {
+ regulator-name = "vreg_l3a_0p9";
+ regulator-min-microvolt = <928000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L4 - lmx.lvl (ARC) */
+
+ vreg_l5a_0p88: ldo5 {
+ regulator-name = "vreg_l5a_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-name = "vreg_l6a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L7 is unused. */
+
+ vreg_l9a_1p2: ldo9 {
+ regulator-name = "vreg_l9a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L10 is unused, L11 - lcx.lvl (ARC) */
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L13 is unused. */
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-name = "vreg_l14a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L15 & L16 are unused. */
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-name = "vreg_l17a_3p0";
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_0p9: ldo18 {
+ regulator-name = "vreg_l18a_0p9";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /*
+ * Remaining regulators that are not yet supported:
+ * OLEDB: 4925000-8100000
+ * ab: 4600000-6100000
+ * ibb: 800000-5400000
+ */
+ pm8150l-rpmh-regulators {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+ vdd-l2-l3-supply = <&vreg_s8c_1p2>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3350000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
+ /*
+ * S1-S6 are ARCs:
+ * (S1+S2) - gfx.lvl,
+ * S3 - mx.lvl,
+ * (S4+S5) - mmcx.lvl,
+ * S6 - ebi.lvl
+ */
+
+ vreg_s7c_0p35: smps7 {
+ regulator-name = "vreg_s7c_0p35";
+ regulator-min-microvolt = <348000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s8c_1p2: smps8 {
+ regulator-name = "vreg_s8c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L2-4 are unused. */
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-name = "vreg_l5c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p9: ldo6 {
+ regulator-name = "vreg_l6c_2p9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7c_2p85: ldo7 {
+ regulator-name = "vreg_l7c_2p85";
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-name = "vreg_l8c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-name = "vreg_l9c_2p9";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-name = "vreg_l10c_3p3";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3296000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p0: ldo11 {
+ regulator-name = "vreg_l11c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8009-rpmh-regulators {
+ compatible = "qcom,pm8009-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vreg_bob>;
+ vdd-l2-supply = <&vreg_s8c_1p2>;
+ vdd-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-supply = <&vreg_s4a_1p8>;
+
+ vreg_s1f_1p2: smps1 {
+ regulator-name = "vreg_s1f_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2f_0p5: smps2 {
+ regulator-name = "vreg_s2f_0p5";
+ regulator-min-microvolt = <512000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L1 is unused. */
+
+ vreg_l2f_1p3: ldo2 {
+ regulator-name = "vreg_l2f_1p3";
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L3 & L4 are unused. */
+
+ vreg_l5f_2p8: ldo5 {
+ regulator-name = "vreg_l5f_2p85";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6f_2p8: ldo6 {
+ regulator-name = "vreg_l6f_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7f_1p8: ldo7 {
+ regulator-name = "vreg_l7f_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&cdsp {
+ status = "okay";
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* NXP PN553 NFC @ 28 */
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <1000000>;
+
+ /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */
+};
+
+&i2c5 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Dialog SLG51000 CMIC @ 75 */
+};
+
+&i2c9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ touchscreen@48 {
+ compatible = "samsung,s6sy761";
+ reg = <0x48>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <39 0x2008>;
+ /* It's "vddio" downstream but it works anyway! */
+ vdd-supply = <&vreg_l1c_1p8>;
+ avdd-supply = <&vreg_l10c_3p3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_default>;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Qcom SMB1390 @ 10 */
+ /* Silicon Labs SI4704 FM Radio Receiver @ 11 */
+ /* Qcom SMB1390_slave @ 18 */
+ /* HALO HL6111R Qi charger @ 25 */
+ /* Richwave RTC6226 FM Radio Receiver @ 64 */
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie2 {
+ status = "okay";
+
+ pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>;
+};
+
+&pcie2_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ status = "okay";
+
+ linux,code = <KEY_VOLUMEUP>;
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+ vmmc-supply = <&vreg_l9c_2p9>;
+ vqmmc-supply = <&vreg_l6c_2p9>;
+ bus-width = <4>;
+ no-sdio;
+ no-emmc;
+};
+
+&slpi {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <40 4>, <52 4>;
+
+ sdc2_default_state: sdc2-default {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc2_data";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ mdm2ap_default: mdm2ap-default {
+ pins = "gpio1", "gpio3";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ ts_int_default: ts-int-default {
+ pins = "gpio39";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disabled;
+ input-enable;
+ };
+
+ ap2mdm_default: ap2mdm-default {
+ pins = "gpio56", "gpio57";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ sdc2_card_det_n: sd-card-det-n {
+ pins = "gpio77";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+};
+
+&uart12 {
+ status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l5a_0p88>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l9a_1p2>;
+ vdda-pll-supply = <&vreg_l18a_0p9>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 4c0de12..4798368 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sm8250.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -519,6 +521,26 @@
};
};
+ gpi_dma2: dma-controller@800000 {
+ compatible = "qcom,sm8250-gpi-dma";
+ reg = <0 0x00800000 0 0x70000>;
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <10>;
+ dma-channel-mask = <0x3f>;
+ iommus = <&apps_smmu 0x76 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -714,6 +736,29 @@
};
};
+ gpi_dma0: dma-controller@900000 {
+ compatible = "qcom,sm8250-gpi-dma";
+ reg = <0 0x00900000 0 0x70000>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <15>;
+ dma-channel-mask = <0x7ff>;
+ iommus = <&apps_smmu 0x5b6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x009c0000 0x0 0x6000>;
@@ -961,6 +1006,26 @@
};
};
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sm8250-gpi-dma";
+ reg = <0 0x00a00000 0 0x70000>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <10>;
+ dma-channel-mask = <0x3f>;
+ iommus = <&apps_smmu 0x56 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -1249,6 +1314,12 @@
phys = <&pcie0_lane>;
phy-names = "pciephy";
+ perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+
status = "disabled";
};
@@ -1347,6 +1418,12 @@
phys = <&pcie1_lane>;
phy-names = "pciephy";
+ perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
+ enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+
status = "disabled";
};
@@ -1447,6 +1524,12 @@
phys = <&pcie2_lane>;
phy-names = "pciephy";
+ perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_default_state>;
+
status = "disabled";
};
@@ -1470,7 +1553,7 @@
status = "disabled";
- pcie2_lane: lanes@1c0e200 {
+ pcie2_lane: lanes@1c16200 {
reg = <0 0x1c16200 0 0x170>, /* tx0 */
<0 0x1c16400 0 0x200>, /* rx0 */
<0 0x1c16a00 0 0x1f0>, /* pcs */
@@ -1746,6 +1829,8 @@
qcom,gmu = <&gmu>;
+ status = "disabled";
+
zap-shader {
memory-region = <&gpu_mem>;
};
@@ -1819,6 +1904,8 @@
operating-points-v2 = <&gmu_opp_table>;
+ status = "disabled";
+
gmu_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -2323,6 +2410,8 @@
<&videocc VIDEO_CC_MVS0C_CLK_ARES>;
reset-names = "bus", "core";
+ status = "disabled";
+
video-decoder {
compatible = "venus-decoder";
};
@@ -2370,7 +2459,7 @@
};
mdss: mdss@ae00000 {
- compatible = "qcom,sdm845-mdss";
+ compatible = "qcom,sm8250-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
@@ -2402,7 +2491,7 @@
ranges;
mdss_mdp: mdp@ae01000 {
- compatible = "qcom,sdm845-dpu";
+ compatible = "qcom,sm8250-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
@@ -2424,8 +2513,6 @@
interrupt-parent = <&mdss>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
-
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -2499,6 +2586,9 @@
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -2566,6 +2656,9 @@
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -3395,6 +3488,95 @@
output-high;
};
};
+
+ sdc2_sleep_state: sdc2-sleep {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie0_default_state: pcie0-default {
+ perst {
+ pins = "gpio79";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio80";
+ function = "pci_e0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio81";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default {
+ perst {
+ pins = "gpio82";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio83";
+ function = "pci_e1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio84";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie2_default_state: pcie2-default {
+ perst {
+ pins = "gpio85";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio86";
+ function = "pci_e2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio87";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
apps_smmu: iommu@15000000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
index 6ca638b..9374044 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -364,3 +364,9 @@
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l5b_0p88>;
};
+
+&ipa {
+ status = "okay";
+
+ memory-region = <&pil_ipa_fw_mem>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index ed0b51b..0d16392 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -6,11 +6,13 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,sm8350.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/qcom,sm8350.h>
/ {
interrupt-parent = <&intc>;
@@ -391,6 +393,17 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
smp2p-slpi {
@@ -629,6 +642,45 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ ipa: ipa@1e40000 {
+ compatible = "qcom,sm8350-ipa";
+
+ iommus = <&apps_smmu 0x5c0 0x0>,
+ <&apps_smmu 0x5c2 0x0>;
+ reg = <0 0x1e40000 0 0x8000>,
+ <0 0x1e50000 0 0x4b20>,
+ <0 0x1e04000 0 0x23000>;
+ reg-names = "ipa-reg",
+ "ipa-shared",
+ "gsi";
+
+ interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>,
+ <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+ <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ipa",
+ "gsi",
+ "ipa-clock-query",
+ "ipa-setup-ready";
+
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+ clock-names = "core";
+
+ interconnects = <&aggre2_noc MASTER_IPA &gem_noc SLAVE_LLCC>,
+ <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+ interconnect-names = "ipa_to_llcc",
+ "llcc_to_ebi1",
+ "appss_to_ipa";
+
+ qcom,smem-states = <&ipa_smp2p_out 0>,
+ <&ipa_smp2p_out 1>;
+ qcom,smem-state-names = "ipa-clock-enabled-valid",
+ "ipa-clock-enabled";
+
+ status = "disabled";
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -656,7 +708,7 @@
<&rpmhpd 12>;
power-domain-names = "load_state", "cx", "mss";
- interconnects = <&mc_virt 0 &mc_virt 1>;
+ interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
memory-region = <&pil_modem_mem>;
@@ -689,7 +741,7 @@
interrupt-controller;
};
- tsens0: thermal-sensor@c222000 {
+ tsens0: thermal-sensor@c263000 {
compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x8>; /* SROT */
@@ -700,7 +752,7 @@
#thermal-sensor-cells = <1>;
};
- tsens1: thermal-sensor@c223000 {
+ tsens1: thermal-sensor@c265000 {
compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x8>; /* SROT */
@@ -1063,7 +1115,7 @@
<&rpmhpd 10>;
power-domain-names = "load_state", "cx", "mxc";
- interconnects = <&compute_noc 1 &mc_virt 1>;
+ interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
memory-region = <&pil_cdsp_mem>;
@@ -1176,7 +1228,7 @@
};
};
- dc_noc: interconnect@90e0000 {
+ dc_noc: interconnect@90c0000 {
compatible = "qcom,sm8350-dc-noc";
reg = <0 0x090c0000 0 0x4200>;
#interconnect-cells = <1>;
@@ -1317,7 +1369,7 @@
};
};
- thermal-zones {
+ thermal_zones: thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index f2de2fa..68e30e2 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -62,3 +62,5 @@
dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
+
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index d8046fe..e3c8b2f 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -271,12 +271,12 @@
&ehci0 {
dr_mode = "otg";
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
};
&ehci1 {
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
};
&hdmi0 {
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 8d3a4d6..090dc9c4 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -53,6 +53,8 @@
phy-handle = <&phy0>;
rx-internal-delay-ps = <1800>;
tx-internal-delay-ps = <2000>;
+ clocks = <&cpg CPG_MOD 812>, <&versaclock5 4>;
+ clock-names = "fck", "refclk";
status = "okay";
phy0: ethernet-phy@0 {
@@ -319,8 +321,10 @@
status = "okay";
};
-&usb_extal_clk {
- clock-frequency = <50000000>;
+&usb2_clksel {
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&versaclock5 3>, <&usb3s0_clk>;
+ status = "okay";
};
&usb3s0_clk {
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 46f8dbf..78c121a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -76,6 +76,7 @@
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
+ opp-suspend;
};
};
@@ -1127,6 +1128,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index d16a4be..28c612c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -1001,6 +1001,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 1aef344..a5d4dce 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -957,6 +957,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 1f51237..379a130 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1230,6 +1230,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 85d66d1..2e4c18b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -1312,6 +1312,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 12476e3..2bd8169 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -63,18 +63,19 @@
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <820000>;
+ opp-microvolt = <830000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <820000>;
+ opp-microvolt = <830000>;
clock-latency-ns = <300000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <820000>;
+ opp-microvolt = <830000>;
clock-latency-ns = <300000>;
+ opp-suspend;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
@@ -1188,6 +1189,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index d980476..91b501e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -52,18 +52,19 @@
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <820000>;
+ opp-microvolt = <830000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <820000>;
+ opp-microvolt = <830000>;
clock-latency-ns = <300000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <820000>;
+ opp-microvolt = <830000>;
clock-latency-ns = <300000>;
+ opp-suspend;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
@@ -559,10 +560,19 @@
};
intc_ex: interrupt-controller@e61c0000 {
+ compatible = "renesas,intc-ex-r8a77961", "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- /* placeholder */
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
};
tmu0: timer@e61e0000 {
@@ -1144,6 +1154,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index dcb9df8..ad69da3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1050,6 +1050,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 874a7fc..5c84681 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -73,6 +73,12 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
};
&avb {
@@ -104,6 +110,8 @@
};
&du {
+ clocks = <&cpg CPG_MOD 724>, <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 7417cf5..2426e53 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -59,7 +59,7 @@
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
- reg = <0x0 0x48000000 0x0 0x38000000>;
+ reg = <0x0 0x48000000 0x0 0x78000000>;
};
osc5_clk: osc5-clock {
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index e8f6352..517892c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -612,6 +612,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 04d47c0..7bde0a5 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -210,7 +210,7 @@
&mmc0 {
pinctrl-0 = <&mmc_pins>;
- pinctrl-1 = <&mmc_pins_uhs>;
+ pinctrl-1 = <&mmc_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&d3_3v>;
@@ -255,12 +255,6 @@
mmc_pins: mmc {
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
function = "mmc";
- power-source = <3300>;
- };
-
- mmc_pins_uhs: mmc_uhs {
- groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
- function = "mmc";
power-source = <1800>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 7b51d46..6347d15 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -664,6 +664,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 0eaea58..4d0304b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1000,6 +1000,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 2319271..84dba37 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -760,6 +760,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
index 14d3db5d..f791c76 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
@@ -6,6 +6,27 @@
*/
&i2c0 {
+ pca9654_a: gpio@21 {
+ compatible = "onnn,pca9654";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9654_b: gpio@22 {
+ compatible = "onnn,pca9654";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pca9654_c: gpio@23 {
+ compatible = "onnn,pca9654";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
eeprom@52 {
compatible = "rohm,br24g01", "atmel,24c01";
label = "csi-dsi-sub-board-id";
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 70b3604..78ca75f 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -618,6 +618,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 211>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 211>;
phy-mode = "rgmii";
@@ -665,6 +666,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 212>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 212>;
phy-mode = "rgmii";
@@ -712,6 +714,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 213>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 213>;
phy-mode = "rgmii";
@@ -759,6 +762,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 214>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 214>;
phy-mode = "rgmii";
@@ -806,6 +810,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 215>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 215>;
phy-mode = "rgmii";
@@ -853,6 +858,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 216>;
+ clock-names = "fck";
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 216>;
phy-mode = "rgmii";
@@ -1096,7 +1102,6 @@
<0x0 0xf1060000 0 0x110000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
- power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
};
fcpvd0: fcp@fea10000 {
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
new file mode 100644
index 0000000..734c8ad
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g044-cpg.h>
+
+/ {
+ compatible = "renesas,r9a07g044";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a55";
+ reg = <0>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ device_type = "cpu";
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ };
+
+ L3_CA55: cache-controller-0 {
+ compatible = "cache";
+ cache-unified;
+ cache-size = <0x40000>;
+ };
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scif0: serial@1004b800 {
+ compatible = "renesas,scif-r9a07g044";
+ reg = <0 0x1004b800 0 0x400>;
+ interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_CLK_SCIF0>;
+ status = "disabled";
+ };
+
+ cpg: clock-controller@11010000 {
+ compatible = "renesas,r9a07g044-cpg";
+ reg = <0 0x11010000 0 0x10000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ sysc: system-controller@11020000 {
+ compatible = "renesas,r9a07g044-sysc";
+ reg = <0 0x11020000 0 0x10000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpm_int", "ca55stbydone_int",
+ "cm33stbyr_int", "ca55_deny";
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@11900000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x11900000 0 0x40000>,
+ <0x0 0x11940000 0 0x60000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
new file mode 100644
index 0000000..9d89d45
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L R9A07G044L1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+ compatible = "renesas,r9a07g044l1", "renesas,r9a07g044";
+
+ cpus {
+ /delete-node/ cpu-map;
+ /delete-node/ cpu@100;
+ };
+
+ timer {
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
new file mode 100644
index 0000000..d3f72ec
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044l2.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+ model = "Renesas SMARC EVK based on r9a07g044l2";
+ compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
new file mode 100644
index 0000000..91dc10b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+ compatible = "renesas,r9a07g044l2", "renesas,r9a07g044";
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
new file mode 100644
index 0000000..adcd4f5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ serial0 = &scif0;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&extal_clk {
+ clock-frequency = <24000000>;
+};
+
+&scif0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index c3e00c0..7fdb41d 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -51,3 +51,4 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 09baa8a..248ebb6 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -244,28 +244,31 @@
#size-cells = <0>;
/* These power domains are grouped by VD_LOGIC */
- pd_usb@PX30_PD_USB {
+ power-domain@PX30_PD_USB {
reg = <PX30_PD_USB>;
clocks = <&cru HCLK_HOST>,
<&cru HCLK_OTG>,
<&cru SCLK_OTG_ADP>;
pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
+ #power-domain-cells = <0>;
};
- pd_sdcard@PX30_PD_SDCARD {
+ power-domain@PX30_PD_SDCARD {
reg = <PX30_PD_SDCARD>;
clocks = <&cru HCLK_SDMMC>,
<&cru SCLK_SDMMC>;
pm_qos = <&qos_sdmmc>;
+ #power-domain-cells = <0>;
};
- pd_gmac@PX30_PD_GMAC {
+ power-domain@PX30_PD_GMAC {
reg = <PX30_PD_GMAC>;
clocks = <&cru ACLK_GMAC>,
<&cru PCLK_GMAC>,
<&cru SCLK_MAC_REF>,
<&cru SCLK_GMAC_RX_TX>;
pm_qos = <&qos_gmac>;
+ #power-domain-cells = <0>;
};
- pd_mmc_nand@PX30_PD_MMC_NAND {
+ power-domain@PX30_PD_MMC_NAND {
reg = <PX30_PD_MMC_NAND>;
clocks = <&cru HCLK_NANDC>,
<&cru HCLK_EMMC>,
@@ -277,15 +280,17 @@
<&cru SCLK_SFC>;
pm_qos = <&qos_emmc>, <&qos_nand>,
<&qos_sdio>, <&qos_sfc>;
+ #power-domain-cells = <0>;
};
- pd_vpu@PX30_PD_VPU {
+ power-domain@PX30_PD_VPU {
reg = <PX30_PD_VPU>;
clocks = <&cru ACLK_VPU>,
<&cru HCLK_VPU>,
<&cru SCLK_CORE_VPU>;
pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
+ #power-domain-cells = <0>;
};
- pd_vo@PX30_PD_VO {
+ power-domain@PX30_PD_VO {
reg = <PX30_PD_VO>;
clocks = <&cru ACLK_RGA>,
<&cru ACLK_VOPB>,
@@ -300,8 +305,9 @@
<&cru SCLK_VOPB_PWM>;
pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
<&qos_vop_m0>, <&qos_vop_m1>;
+ #power-domain-cells = <0>;
};
- pd_vi@PX30_PD_VI {
+ power-domain@PX30_PD_VI {
reg = <PX30_PD_VI>;
clocks = <&cru ACLK_CIF>,
<&cru ACLK_ISP>,
@@ -311,11 +317,13 @@
pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
<&qos_isp_wr>, <&qos_isp_m1>,
<&qos_vip>;
+ #power-domain-cells = <0>;
};
- pd_gpu@PX30_PD_GPU {
+ power-domain@PX30_PD_GPU {
reg = <PX30_PD_GPU>;
clocks = <&cru SCLK_GPU>;
pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
};
};
};
@@ -814,7 +822,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,px30-usb2phy";
reg = <0x100 0x20>;
clocks = <&pmucru SCLK_USBPHY_REF>;
@@ -1087,7 +1095,6 @@
compatible = "rockchip,iommu";
reg = <0x0 0xff460f00 0x0 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopb_mmu";
clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
clock-names = "aclk", "iface";
power-domains = <&power PX30_PD_VO>;
@@ -1128,7 +1135,6 @@
compatible = "rockchip,iommu";
reg = <0x0 0xff470f00 0x0 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vopl_mmu";
clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
clock-names = "aclk", "iface";
power-domains = <&power PX30_PD_VO>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
index 3dddd47..665b2e6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -84,8 +84,8 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x0
- 3300000 0x1>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
vin-supply = <&vcc5v0_sys>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index b815ce7..a185901 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -164,7 +164,7 @@
grf: grf@ff000000 {
compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd";
- reg = <0x0 0xff000000 0x0 0x10000>;
+ reg = <0x0 0xff000000 0x0 0x08000>;
reboot-mode {
compatible = "syscon-reboot-mode";
@@ -177,6 +177,42 @@
};
};
+ usb2phy_grf: syscon@ff008000 {
+ compatible = "rockchip,rk3308-usb2phy-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xff008000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy: usb2phy@100 {
+ compatible = "rockchip,rk3308-usb2phy";
+ reg = <0x100 0x10>;
+ assigned-clocks = <&cru USB480M>;
+ assigned-clock-parents = <&u2phy>;
+ clocks = <&cru SCLK_USBPHY_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "usb480m_phy";
+ #clock-cells = <0>;
+ status = "disabled";
+
+ u2phy_otg: otg-port {
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy_host: host-port {
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
detect_grf: syscon@ff00b000 {
compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd";
reg = <0x0 0xff00b000 0x0 0x1000>;
@@ -579,6 +615,42 @@
status = "disabled";
};
+ usb20_otg: usb@ff400000 {
+ compatible = "rockchip,rk3308-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x0 0xff400000 0x0 0x40000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
+ phys = <&u2phy_otg>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb_host_ehci: usb@ff440000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xff440000 0x0 0x10000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host_ohci: usb@ff450000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xff450000 0x0 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
sdmmc: mmc@ff480000 {
compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff480000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 49c97f7..7fc674a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -165,6 +165,31 @@
};
};
+ rk817-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Analog";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "MICL", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "Speaker", "SPKO";
+
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_2ch>;
+ };
+ };
+
vccsys: vccsys {
compatible = "regulator-fixed";
regulator-name = "vcc3v8_sys";
@@ -239,6 +264,7 @@
backlight = <&backlight>;
iovcc-supply = <&vcc_lcd>;
reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+ rotation = <270>;
vdd-supply = <&vcc_lcd>;
port {
@@ -269,11 +295,14 @@
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "rk808-clkout1", "xin32k";
+ clock-names = "mclk";
+ clocks = <&cru SCLK_I2S1_OUT>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
+ pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
wakeup-source;
#clock-cells = <1>;
- clock-output-names = "rk808-clkout1", "xin32k";
+ #sound-dai-cells = <0>;
vcc1-supply = <&vccsys>;
vcc2-supply = <&vccsys>;
@@ -432,6 +461,10 @@
};
};
};
+
+ rk817_codec: codec {
+ rockchip,mic-in-differential;
+ };
};
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index f807bc0..3857d48 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -14,6 +14,7 @@
compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
aliases {
+ ethernet1 = &rtl8153;
mmc0 = &sdmmc;
};
@@ -76,8 +77,8 @@
regulator-settling-time-us = <5000>;
regulator-type = "voltage";
startup-delay-us = <2000>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
vin-supply = <&vcc_io_33>;
};
@@ -101,6 +102,18 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ vdd_5v_lan: vdd-5v-lan {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&lan_vdd_pin>;
+ pinctrl-names = "default";
+ regulator-name = "vdd_5v_lan";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
};
&cpu0 {
@@ -309,6 +322,12 @@
};
};
+ lan {
+ lan_vdd_pin: lan-vdd-pin {
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -368,6 +387,19 @@
dr_mode = "host";
};
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Second port is for USB 3.0 */
+ rtl8153: device@2 {
+ compatible = "usbbda,8153";
+ reg = <2>;
+ };
+};
+
&usb_host0_ehci {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index a05732b..aa22a0c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -50,8 +50,8 @@
vcc_sdio: sdmmcio-regulator {
compatible = "regulator-gpio";
gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
regulator-name = "vcc_sdio";
regulator-type = "voltage";
regulator-min-microvolt = <1800000>;
@@ -363,6 +363,11 @@
status = "okay";
};
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_host0_ehci {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index c7e31ef..018a3a5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -177,8 +177,6 @@
};
&gmac2phy {
- pinctrl-names = "default";
- pinctrl-0 = <&fephyled_linkm1>, <&fephyled_rxm1>;
status = "okay";
};
@@ -382,6 +380,11 @@
status = "okay";
};
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_host0_ehci {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 3bef1f3..1b0f7e4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -381,6 +381,11 @@
status = "okay";
};
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_host0_ehci {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 3ed69ec..8c821ac 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -288,7 +288,7 @@
status = "disabled";
};
- grf_gpio: grf-gpio {
+ grf_gpio: gpio {
compatible = "rockchip,rk3328-grf-gpio";
gpio-controller;
#gpio-cells = <2>;
@@ -300,15 +300,18 @@
#address-cells = <1>;
#size-cells = <0>;
- pd_hevc@RK3328_PD_HEVC {
+ power-domain@RK3328_PD_HEVC {
reg = <RK3328_PD_HEVC>;
+ #power-domain-cells = <0>;
};
- pd_video@RK3328_PD_VIDEO {
+ power-domain@RK3328_PD_VIDEO {
reg = <RK3328_PD_VIDEO>;
+ #power-domain-cells = <0>;
};
- pd_vpu@RK3328_PD_VPU {
+ power-domain@RK3328_PD_VPU {
reg = <RK3328_PD_VPU>;
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ #power-domain-cells = <0>;
};
};
@@ -816,7 +819,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rk3328-usb2phy";
reg = <0x100 0x10>;
clocks = <&xin24m>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index dfc6376..4c64fbe 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -664,6 +664,8 @@
compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
reg = <0x0 0xff810000 0x0 0x20>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+ clock-names = "pclk", "timer";
};
spdif: spdif@ff880000 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index 45254be1..c4dd2a6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
@@ -94,6 +95,13 @@
};
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -151,6 +159,23 @@
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
+ sound-dit {
+ compatible = "audio-graph-card";
+ label = "SPDIF";
+ dais = <&spdif_p0>;
+ };
+
+ spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port {
+ dit_p0_0: endpoint {
+ remote-endpoint = <&spdif_p0_0>;
+ };
+ };
+ };
+
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
@@ -196,6 +221,17 @@
vin-supply = <&vcc_sys>;
};
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
vcc_sys: vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
@@ -521,6 +557,53 @@
i2c-scl-falling-time-ns = <20>;
status = "okay";
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+ data-role = "host";
+ label = "USB-C";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc_hs: endpoint {
+ remote-endpoint =
+ <&u2phy0_typec_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc_ss: endpoint {
+ remote-endpoint =
+ <&tcphy0_typec_ss>;
+ };
+ };
+ };
+ };
+ };
+
accelerometer@68 {
compatible = "invensense,mpu6500";
reg = <0x68>;
@@ -578,12 +661,34 @@
};
};
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
lcd-panel {
lcd_panel_reset: lcd-panel-reset {
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+ leds {
+ work_led_pin: work-led-pin {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_pin: diy-led-pin {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pcie {
pcie_pwr_en: pcie-pwr-en {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -595,6 +700,10 @@
};
pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
vsel1_pin: vsel1-pin {
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
@@ -604,21 +713,21 @@
};
};
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
rt5640 {
rt5640_hpcon: rt5640-hpcon {
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
@@ -633,16 +742,6 @@
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
-
- leds {
- work_led_pin: work-led-pin {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- diy_led_pin: diy-led-pin {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
};
&pwm0 {
@@ -710,10 +809,29 @@
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdif_bus_1>;
+ status = "okay";
+
+ spdif_p0: port {
+ spdif_p0_0: endpoint {
+ remote-endpoint = <&dit_p0_0>;
+ };
+ };
+};
+
&tcphy0 {
status = "okay";
};
+&tcphy0_usb3 {
+ port {
+ tcphy0_typec_ss: endpoint {
+ remote-endpoint = <&usbc_ss>;
+ };
+ };
+};
+
&tcphy1 {
status = "okay";
};
@@ -737,6 +855,12 @@
phy-supply = <&vcc5v0_host>;
status = "okay";
};
+
+ port {
+ u2phy0_typec_hs: endpoint {
+ remote-endpoint = <&usbc_hs>;
+ };
+ };
};
&u2phy1 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index beee5fb..5d7a9d9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -245,7 +245,7 @@
};
&ppvar_sd_card_io {
- states = <1800000 0x0 3300000 0x1>;
+ states = <1800000 0x0>, <3300000 0x1>;
regulator-max-microvolt = <3300000>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 4002742..c1bcc8c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -252,8 +252,8 @@
enable-active-high;
enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3000000 0x0>;
+ states = <1800000 0x1>,
+ <3000000 0x0>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 19485b5..738cfd2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -23,6 +23,16 @@
mmc1 = &sdhci;
};
+ avdd_0v9_s0: avdd-0v9-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_0v9_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc1v8_sys_s3>;
+ };
+
avdd_1v8_s0: avdd-1v8-s0 {
compatible = "regulator-fixed";
regulator-name = "avdd_1v8_s0";
@@ -40,6 +50,20 @@
#clock-cells = <0>;
};
+ fan1 {
+ /* fan connected to P7 */
+ compatible = "pwm-fan";
+ pwms = <&pwm0 0 40000 0>;
+ cooling-levels = <0 80 170 255>;
+ };
+
+ fan2 {
+ /* fan connected to P6 */
+ compatible = "pwm-fan";
+ pwms = <&pwm1 0 40000 0>;
+ cooling-levels = <0 80 170 255>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -58,6 +82,18 @@
};
};
+ pcie_power: pcie-power {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie_pwr>;
+ pinctrl-names = "default";
+ regulator-boot-on;
+ regulator-name = "pcie_power";
+ startup-delay-us = <10000>;
+ vin-supply = <&vcc5v0_perdev>;
+ };
+
vcc1v8_sys_s0: vcc1v8-sys-s0 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8_sys_s0";
@@ -95,6 +131,16 @@
};
};
+ vcc5v0_perdev: vcc5v0-perdev {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_perdev";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin_bkup>;
+ };
+
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
@@ -109,6 +155,20 @@
};
};
+ vcc5v0_usb: vcc5v0-usb {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_en>;
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_perdev>;
+ };
+
vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -317,6 +377,20 @@
status = "okay";
};
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ num-lanes = <2>;
+ status = "okay";
+
+ vpcie12v-supply = <&vcc12v_dcin>;
+ vpcie3v3-supply = <&pcie_power>;
+ vpcie1v8-supply = <&avdd_1v8_s0>;
+ vpcie0v9-supply = <&avdd_0v9_s0>;
+};
+
&pinctrl {
gmac {
gphy_reset: gphy-reset {
@@ -334,12 +408,25 @@
};
};
+ pcie {
+ pcie_pwr: pcie-pwr {
+ rockchip,pins =
+ <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+ power {
+ vcc5v0_usb_en: vcc5v0-usb-en {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
vcc3v0-sd {
sdmmc0_pwr_h: sdmmc0-pwr-h {
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -352,6 +439,16 @@
status = "okay";
};
+&pwm0 {
+ /* pwm-fan on P7 */
+ status = "okay";
+};
+
+&pwm1 {
+ /* pwm-fan on P6 */
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
mmc-hs200-1_8v;
@@ -372,6 +469,30 @@
status = "okay";
};
+&tcphy1 {
+ /* phy for &usbdrd_dwc3_1 */
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+
+ otg-port {
+ /* phy for &usbdrd_dwc3_1 */
+ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+ };
+};
+
&uart2 {
status = "okay";
};
+
+&usbdrd3_1 {
+ status = "okay";
+
+ usb@fe900000 {
+ dr_mode = "host";
+ status = "okay";
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
index fa58098..cef4d18 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -33,7 +33,7 @@
sys_led: led-sys {
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- label = "red:sys";
+ label = "red:power";
default-state = "on";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 16fd58c..8c0ff6c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -510,7 +510,6 @@
};
&pcie0 {
- max-link-speed = <2>;
num-lanes = <2>;
vpcie0v9-supply = <&vcca0v9_s3>;
vpcie1v8-supply = <&vcca1v8_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index c172f5a..d1aaf8e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -63,6 +63,13 @@
};
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -389,6 +396,7 @@
vcc_sdio: LDO_REG4 {
regulator-name = "vcc_sdio";
+ regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
@@ -493,6 +501,8 @@
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
@@ -601,6 +611,12 @@
};
};
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
lcd-panel {
lcd_panel_reset: lcd-panel-reset {
rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 7d0a7c69..b28888e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -474,7 +474,6 @@
&pcie0 {
ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
- max-link-speed = <2>;
num-lanes = <4>;
pinctrl-0 = <&pcie_clkreqnb_cpm>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 634a91a..3871c7f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -227,7 +227,7 @@
<&pcie_phy 2>, <&pcie_phy 3>;
phy-names = "pcie-phy-0", "pcie-phy-1",
"pcie-phy-2", "pcie-phy-3";
- ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+ ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
<0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
@@ -968,126 +968,146 @@
#size-cells = <0>;
/* These power domains are grouped by VD_CENTER */
- pd_iep@RK3399_PD_IEP {
+ power-domain@RK3399_PD_IEP {
reg = <RK3399_PD_IEP>;
clocks = <&cru ACLK_IEP>,
<&cru HCLK_IEP>;
pm_qos = <&qos_iep>;
+ #power-domain-cells = <0>;
};
- pd_rga@RK3399_PD_RGA {
+ power-domain@RK3399_PD_RGA {
reg = <RK3399_PD_RGA>;
clocks = <&cru ACLK_RGA>,
<&cru HCLK_RGA>;
pm_qos = <&qos_rga_r>,
<&qos_rga_w>;
+ #power-domain-cells = <0>;
};
- pd_vcodec@RK3399_PD_VCODEC {
+ power-domain@RK3399_PD_VCODEC {
reg = <RK3399_PD_VCODEC>;
clocks = <&cru ACLK_VCODEC>,
<&cru HCLK_VCODEC>;
pm_qos = <&qos_video_m0>;
+ #power-domain-cells = <0>;
};
- pd_vdu@RK3399_PD_VDU {
+ power-domain@RK3399_PD_VDU {
reg = <RK3399_PD_VDU>;
clocks = <&cru ACLK_VDU>,
<&cru HCLK_VDU>;
pm_qos = <&qos_video_m1_r>,
<&qos_video_m1_w>;
+ #power-domain-cells = <0>;
};
/* These power domains are grouped by VD_GPU */
- pd_gpu@RK3399_PD_GPU {
+ power-domain@RK3399_PD_GPU {
reg = <RK3399_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu>;
+ #power-domain-cells = <0>;
};
/* These power domains are grouped by VD_LOGIC */
- pd_edp@RK3399_PD_EDP {
+ power-domain@RK3399_PD_EDP {
reg = <RK3399_PD_EDP>;
clocks = <&cru PCLK_EDP_CTRL>;
+ #power-domain-cells = <0>;
};
- pd_emmc@RK3399_PD_EMMC {
+ power-domain@RK3399_PD_EMMC {
reg = <RK3399_PD_EMMC>;
clocks = <&cru ACLK_EMMC>;
pm_qos = <&qos_emmc>;
+ #power-domain-cells = <0>;
};
- pd_gmac@RK3399_PD_GMAC {
+ power-domain@RK3399_PD_GMAC {
reg = <RK3399_PD_GMAC>;
clocks = <&cru ACLK_GMAC>,
<&cru PCLK_GMAC>;
pm_qos = <&qos_gmac>;
+ #power-domain-cells = <0>;
};
- pd_sd@RK3399_PD_SD {
+ power-domain@RK3399_PD_SD {
reg = <RK3399_PD_SD>;
clocks = <&cru HCLK_SDMMC>,
<&cru SCLK_SDMMC>;
pm_qos = <&qos_sd>;
+ #power-domain-cells = <0>;
};
- pd_sdioaudio@RK3399_PD_SDIOAUDIO {
+ power-domain@RK3399_PD_SDIOAUDIO {
reg = <RK3399_PD_SDIOAUDIO>;
clocks = <&cru HCLK_SDIO>;
pm_qos = <&qos_sdioaudio>;
+ #power-domain-cells = <0>;
};
- pd_tcpc0@RK3399_PD_TCPD0 {
+ power-domain@RK3399_PD_TCPD0 {
reg = <RK3399_PD_TCPD0>;
clocks = <&cru SCLK_UPHY0_TCPDCORE>,
<&cru SCLK_UPHY0_TCPDPHY_REF>;
+ #power-domain-cells = <0>;
};
- pd_tcpc1@RK3399_PD_TCPD1 {
+ power-domain@RK3399_PD_TCPD1 {
reg = <RK3399_PD_TCPD1>;
clocks = <&cru SCLK_UPHY1_TCPDCORE>,
<&cru SCLK_UPHY1_TCPDPHY_REF>;
+ #power-domain-cells = <0>;
};
- pd_usb3@RK3399_PD_USB3 {
+ power-domain@RK3399_PD_USB3 {
reg = <RK3399_PD_USB3>;
clocks = <&cru ACLK_USB3>;
pm_qos = <&qos_usb_otg0>,
<&qos_usb_otg1>;
+ #power-domain-cells = <0>;
};
- pd_vio@RK3399_PD_VIO {
+ power-domain@RK3399_PD_VIO {
reg = <RK3399_PD_VIO>;
+ #power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
- pd_hdcp@RK3399_PD_HDCP {
+ power-domain@RK3399_PD_HDCP {
reg = <RK3399_PD_HDCP>;
clocks = <&cru ACLK_HDCP>,
<&cru HCLK_HDCP>,
<&cru PCLK_HDCP>;
pm_qos = <&qos_hdcp>;
+ #power-domain-cells = <0>;
};
- pd_isp0@RK3399_PD_ISP0 {
+ power-domain@RK3399_PD_ISP0 {
reg = <RK3399_PD_ISP0>;
clocks = <&cru ACLK_ISP0>,
<&cru HCLK_ISP0>;
pm_qos = <&qos_isp0_m0>,
<&qos_isp0_m1>;
+ #power-domain-cells = <0>;
};
- pd_isp1@RK3399_PD_ISP1 {
+ power-domain@RK3399_PD_ISP1 {
reg = <RK3399_PD_ISP1>;
clocks = <&cru ACLK_ISP1>,
<&cru HCLK_ISP1>;
pm_qos = <&qos_isp1_m0>,
<&qos_isp1_m1>;
+ #power-domain-cells = <0>;
};
- pd_vo@RK3399_PD_VO {
+ power-domain@RK3399_PD_VO {
reg = <RK3399_PD_VO>;
+ #power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
- pd_vopb@RK3399_PD_VOPB {
+ power-domain@RK3399_PD_VOPB {
reg = <RK3399_PD_VOPB>;
clocks = <&cru ACLK_VOP0>,
<&cru HCLK_VOP0>;
pm_qos = <&qos_vop_big_r>,
<&qos_vop_big_w>;
+ #power-domain-cells = <0>;
};
- pd_vopl@RK3399_PD_VOPL {
+ power-domain@RK3399_PD_VOPL {
reg = <RK3399_PD_VOPL>;
clocks = <&cru ACLK_VOP1>,
<&cru HCLK_VOP1>;
pm_qos = <&qos_vop_little>;
+ #power-domain-cells = <0>;
};
};
};
@@ -1398,7 +1418,7 @@
status = "disabled";
};
- u2phy0: usb2-phy@e450 {
+ u2phy0: usb2phy@e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
clocks = <&cru SCLK_USB2PHY0_REF>;
@@ -1425,7 +1445,7 @@
};
};
- u2phy1: usb2-phy@e460 {
+ u2phy1: usb2phy@e460 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe460 0x10>;
clocks = <&cru SCLK_USB2PHY1_REF>;
@@ -2354,7 +2374,7 @@
};
};
- sleep {
+ suspend {
ap_pwroff: ap-pwroff {
rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index c0074b3..01d1a75 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -329,7 +329,6 @@
&pcie0 {
ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
- max-link-speed = <2>;
num-lanes = <4>;
pinctrl-0 = <&pcie_clkreqnb_cpm>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
new file mode 100644
index 0000000..6978655
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3568.dtsi"
+
+/ {
+ model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
+ compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568";
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc3v3_lcd0_n: vcc3v3-lcd0-n {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lcd0_n";
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_lcd1_n: vcc3v3-lcd1-n {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lcd1_n";
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
new file mode 100644
index 0000000..a588ca9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
@@ -0,0 +1,3111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+ acodec {
+ /omit-if-no-ref/
+ acodec_pins: acodec-pins {
+ rockchip,pins =
+ /* acodec_adc_sync */
+ <1 RK_PB1 5 &pcfg_pull_none>,
+ /* acodec_adcclk */
+ <1 RK_PA1 5 &pcfg_pull_none>,
+ /* acodec_adcdata */
+ <1 RK_PA0 5 &pcfg_pull_none>,
+ /* acodec_dac_datal */
+ <1 RK_PA7 5 &pcfg_pull_none>,
+ /* acodec_dac_datar */
+ <1 RK_PB0 5 &pcfg_pull_none>,
+ /* acodec_dacclk */
+ <1 RK_PA3 5 &pcfg_pull_none>,
+ /* acodec_dacsync */
+ <1 RK_PA5 5 &pcfg_pull_none>;
+ };
+ };
+
+ audiopwm {
+ /omit-if-no-ref/
+ audiopwm_lout: audiopwm-lout {
+ rockchip,pins =
+ /* audiopwm_lout */
+ <1 RK_PA0 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ audiopwm_loutn: audiopwm-loutn {
+ rockchip,pins =
+ /* audiopwm_loutn */
+ <1 RK_PA1 6 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ audiopwm_loutp: audiopwm-loutp {
+ rockchip,pins =
+ /* audiopwm_loutp */
+ <1 RK_PA0 6 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ audiopwm_rout: audiopwm-rout {
+ rockchip,pins =
+ /* audiopwm_rout */
+ <1 RK_PA1 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ audiopwm_routn: audiopwm-routn {
+ rockchip,pins =
+ /* audiopwm_routn */
+ <1 RK_PA7 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ audiopwm_routp: audiopwm-routp {
+ rockchip,pins =
+ /* audiopwm_routp */
+ <1 RK_PA6 4 &pcfg_pull_none>;
+ };
+ };
+
+ bt656 {
+ /omit-if-no-ref/
+ bt656m0_pins: bt656m0-pins {
+ rockchip,pins =
+ /* bt656_clkm0 */
+ <3 RK_PA0 2 &pcfg_pull_none>,
+ /* bt656_d0m0 */
+ <2 RK_PD0 2 &pcfg_pull_none>,
+ /* bt656_d1m0 */
+ <2 RK_PD1 2 &pcfg_pull_none>,
+ /* bt656_d2m0 */
+ <2 RK_PD2 2 &pcfg_pull_none>,
+ /* bt656_d3m0 */
+ <2 RK_PD3 2 &pcfg_pull_none>,
+ /* bt656_d4m0 */
+ <2 RK_PD4 2 &pcfg_pull_none>,
+ /* bt656_d5m0 */
+ <2 RK_PD5 2 &pcfg_pull_none>,
+ /* bt656_d6m0 */
+ <2 RK_PD6 2 &pcfg_pull_none>,
+ /* bt656_d7m0 */
+ <2 RK_PD7 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ bt656m1_pins: bt656m1-pins {
+ rockchip,pins =
+ /* bt656_clkm1 */
+ <4 RK_PB4 5 &pcfg_pull_none>,
+ /* bt656_d0m1 */
+ <3 RK_PC6 5 &pcfg_pull_none>,
+ /* bt656_d1m1 */
+ <3 RK_PC7 5 &pcfg_pull_none>,
+ /* bt656_d2m1 */
+ <3 RK_PD0 5 &pcfg_pull_none>,
+ /* bt656_d3m1 */
+ <3 RK_PD1 5 &pcfg_pull_none>,
+ /* bt656_d4m1 */
+ <3 RK_PD2 5 &pcfg_pull_none>,
+ /* bt656_d5m1 */
+ <3 RK_PD3 5 &pcfg_pull_none>,
+ /* bt656_d6m1 */
+ <3 RK_PD4 5 &pcfg_pull_none>,
+ /* bt656_d7m1 */
+ <3 RK_PD5 5 &pcfg_pull_none>;
+ };
+ };
+
+ bt1120 {
+ /omit-if-no-ref/
+ bt1120_pins: bt1120-pins {
+ rockchip,pins =
+ /* bt1120_clk */
+ <3 RK_PA6 2 &pcfg_pull_none>,
+ /* bt1120_d0 */
+ <3 RK_PA1 2 &pcfg_pull_none>,
+ /* bt1120_d1 */
+ <3 RK_PA2 2 &pcfg_pull_none>,
+ /* bt1120_d2 */
+ <3 RK_PA3 2 &pcfg_pull_none>,
+ /* bt1120_d3 */
+ <3 RK_PA4 2 &pcfg_pull_none>,
+ /* bt1120_d4 */
+ <3 RK_PA5 2 &pcfg_pull_none>,
+ /* bt1120_d5 */
+ <3 RK_PA7 2 &pcfg_pull_none>,
+ /* bt1120_d6 */
+ <3 RK_PB0 2 &pcfg_pull_none>,
+ /* bt1120_d7 */
+ <3 RK_PB1 2 &pcfg_pull_none>,
+ /* bt1120_d8 */
+ <3 RK_PB2 2 &pcfg_pull_none>,
+ /* bt1120_d9 */
+ <3 RK_PB3 2 &pcfg_pull_none>,
+ /* bt1120_d10 */
+ <3 RK_PB4 2 &pcfg_pull_none>,
+ /* bt1120_d11 */
+ <3 RK_PB5 2 &pcfg_pull_none>,
+ /* bt1120_d12 */
+ <3 RK_PB6 2 &pcfg_pull_none>,
+ /* bt1120_d13 */
+ <3 RK_PC1 2 &pcfg_pull_none>,
+ /* bt1120_d14 */
+ <3 RK_PC2 2 &pcfg_pull_none>,
+ /* bt1120_d15 */
+ <3 RK_PC3 2 &pcfg_pull_none>;
+ };
+ };
+
+ cam {
+ /omit-if-no-ref/
+ cam_clkout0: cam-clkout0 {
+ rockchip,pins =
+ /* cam_clkout0 */
+ <4 RK_PA7 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ cam_clkout1: cam-clkout1 {
+ rockchip,pins =
+ /* cam_clkout1 */
+ <4 RK_PB0 1 &pcfg_pull_none>;
+ };
+ };
+
+ can0 {
+ /omit-if-no-ref/
+ can0m0_pins: can0m0-pins {
+ rockchip,pins =
+ /* can0_rxm0 */
+ <0 RK_PB4 2 &pcfg_pull_none>,
+ /* can0_txm0 */
+ <0 RK_PB3 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ can0m1_pins: can0m1-pins {
+ rockchip,pins =
+ /* can0_rxm1 */
+ <2 RK_PA2 4 &pcfg_pull_none>,
+ /* can0_txm1 */
+ <2 RK_PA1 4 &pcfg_pull_none>;
+ };
+ };
+
+ can1 {
+ /omit-if-no-ref/
+ can1m0_pins: can1m0-pins {
+ rockchip,pins =
+ /* can1_rxm0 */
+ <1 RK_PA0 3 &pcfg_pull_none>,
+ /* can1_txm0 */
+ <1 RK_PA1 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ can1m1_pins: can1m1-pins {
+ rockchip,pins =
+ /* can1_rxm1 */
+ <4 RK_PC2 3 &pcfg_pull_none>,
+ /* can1_txm1 */
+ <4 RK_PC3 3 &pcfg_pull_none>;
+ };
+ };
+
+ can2 {
+ /omit-if-no-ref/
+ can2m0_pins: can2m0-pins {
+ rockchip,pins =
+ /* can2_rxm0 */
+ <4 RK_PB4 3 &pcfg_pull_none>,
+ /* can2_txm0 */
+ <4 RK_PB5 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ can2m1_pins: can2m1-pins {
+ rockchip,pins =
+ /* can2_rxm1 */
+ <2 RK_PB1 4 &pcfg_pull_none>,
+ /* can2_txm1 */
+ <2 RK_PB2 4 &pcfg_pull_none>;
+ };
+ };
+
+ cif {
+ /omit-if-no-ref/
+ cif_clk: cif-clk {
+ rockchip,pins =
+ /* cif_clkout */
+ <4 RK_PC0 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ cif_dvp_clk: cif-dvp-clk {
+ rockchip,pins =
+ /* cif_clkin */
+ <4 RK_PC1 1 &pcfg_pull_none>,
+ /* cif_href */
+ <4 RK_PB6 1 &pcfg_pull_none>,
+ /* cif_vsync */
+ <4 RK_PB7 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ cif_dvp_bus16: cif-dvp-bus16 {
+ rockchip,pins =
+ /* cif_d8 */
+ <3 RK_PD6 1 &pcfg_pull_none>,
+ /* cif_d9 */
+ <3 RK_PD7 1 &pcfg_pull_none>,
+ /* cif_d10 */
+ <4 RK_PA0 1 &pcfg_pull_none>,
+ /* cif_d11 */
+ <4 RK_PA1 1 &pcfg_pull_none>,
+ /* cif_d12 */
+ <4 RK_PA2 1 &pcfg_pull_none>,
+ /* cif_d13 */
+ <4 RK_PA3 1 &pcfg_pull_none>,
+ /* cif_d14 */
+ <4 RK_PA4 1 &pcfg_pull_none>,
+ /* cif_d15 */
+ <4 RK_PA5 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ cif_dvp_bus8: cif-dvp-bus8 {
+ rockchip,pins =
+ /* cif_d0 */
+ <3 RK_PC6 1 &pcfg_pull_none>,
+ /* cif_d1 */
+ <3 RK_PC7 1 &pcfg_pull_none>,
+ /* cif_d2 */
+ <3 RK_PD0 1 &pcfg_pull_none>,
+ /* cif_d3 */
+ <3 RK_PD1 1 &pcfg_pull_none>,
+ /* cif_d4 */
+ <3 RK_PD2 1 &pcfg_pull_none>,
+ /* cif_d5 */
+ <3 RK_PD3 1 &pcfg_pull_none>,
+ /* cif_d6 */
+ <3 RK_PD4 1 &pcfg_pull_none>,
+ /* cif_d7 */
+ <3 RK_PD5 1 &pcfg_pull_none>;
+ };
+ };
+
+ clk32k {
+ /omit-if-no-ref/
+ clk32k_in: clk32k-in {
+ rockchip,pins =
+ /* clk32k_in */
+ <0 RK_PB0 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ clk32k_out0: clk32k-out0 {
+ rockchip,pins =
+ /* clk32k_out0 */
+ <0 RK_PB0 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ clk32k_out1: clk32k-out1 {
+ rockchip,pins =
+ /* clk32k_out1 */
+ <2 RK_PC6 1 &pcfg_pull_none>;
+ };
+ };
+
+ cpu {
+ /omit-if-no-ref/
+ cpu_pins: cpu-pins {
+ rockchip,pins =
+ /* cpu_avs */
+ <0 RK_PB7 2 &pcfg_pull_none>;
+ };
+ };
+
+ ebc {
+ /omit-if-no-ref/
+ ebc_extern: ebc-extern {
+ rockchip,pins =
+ /* ebc_sdce1 */
+ <4 RK_PA7 2 &pcfg_pull_none>,
+ /* ebc_sdce2 */
+ <4 RK_PB0 2 &pcfg_pull_none>,
+ /* ebc_sdce3 */
+ <4 RK_PB1 2 &pcfg_pull_none>,
+ /* ebc_sdshr */
+ <4 RK_PB5 2 &pcfg_pull_none>,
+ /* ebc_vcom */
+ <4 RK_PB2 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ ebc_pins: ebc-pins {
+ rockchip,pins =
+ /* ebc_gdclk */
+ <4 RK_PC0 2 &pcfg_pull_none>,
+ /* ebc_gdoe */
+ <4 RK_PB3 2 &pcfg_pull_none>,
+ /* ebc_gdsp */
+ <4 RK_PB4 2 &pcfg_pull_none>,
+ /* ebc_sdce0 */
+ <4 RK_PA6 2 &pcfg_pull_none>,
+ /* ebc_sdclk */
+ <4 RK_PC1 2 &pcfg_pull_none>,
+ /* ebc_sddo0 */
+ <3 RK_PC6 2 &pcfg_pull_none>,
+ /* ebc_sddo1 */
+ <3 RK_PC7 2 &pcfg_pull_none>,
+ /* ebc_sddo2 */
+ <3 RK_PD0 2 &pcfg_pull_none>,
+ /* ebc_sddo3 */
+ <3 RK_PD1 2 &pcfg_pull_none>,
+ /* ebc_sddo4 */
+ <3 RK_PD2 2 &pcfg_pull_none>,
+ /* ebc_sddo5 */
+ <3 RK_PD3 2 &pcfg_pull_none>,
+ /* ebc_sddo6 */
+ <3 RK_PD4 2 &pcfg_pull_none>,
+ /* ebc_sddo7 */
+ <3 RK_PD5 2 &pcfg_pull_none>,
+ /* ebc_sddo8 */
+ <3 RK_PD6 2 &pcfg_pull_none>,
+ /* ebc_sddo9 */
+ <3 RK_PD7 2 &pcfg_pull_none>,
+ /* ebc_sddo10 */
+ <4 RK_PA0 2 &pcfg_pull_none>,
+ /* ebc_sddo11 */
+ <4 RK_PA1 2 &pcfg_pull_none>,
+ /* ebc_sddo12 */
+ <4 RK_PA2 2 &pcfg_pull_none>,
+ /* ebc_sddo13 */
+ <4 RK_PA3 2 &pcfg_pull_none>,
+ /* ebc_sddo14 */
+ <4 RK_PA4 2 &pcfg_pull_none>,
+ /* ebc_sddo15 */
+ <4 RK_PA5 2 &pcfg_pull_none>,
+ /* ebc_sdle */
+ <4 RK_PB6 2 &pcfg_pull_none>,
+ /* ebc_sdoe */
+ <4 RK_PB7 2 &pcfg_pull_none>;
+ };
+ };
+
+ edpdp {
+ /omit-if-no-ref/
+ edpdpm0_pins: edpdpm0-pins {
+ rockchip,pins =
+ /* edpdp_hpdinm0 */
+ <4 RK_PC4 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ edpdpm1_pins: edpdpm1-pins {
+ rockchip,pins =
+ /* edpdp_hpdinm1 */
+ <0 RK_PC2 2 &pcfg_pull_none>;
+ };
+ };
+
+ emmc {
+ /omit-if-no-ref/
+ emmc_rstnout: emmc-rstnout {
+ rockchip,pins =
+ /* emmc_rstn */
+ <1 RK_PC7 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins =
+ /* emmc_d0 */
+ <1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d1 */
+ <1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d2 */
+ <1 RK_PB6 1 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d3 */
+ <1 RK_PB7 1 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d4 */
+ <1 RK_PC0 1 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d5 */
+ <1 RK_PC1 1 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d6 */
+ <1 RK_PC2 1 &pcfg_pull_up_drv_level_2>,
+ /* emmc_d7 */
+ <1 RK_PC3 1 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ emmc_clk: emmc-clk {
+ rockchip,pins =
+ /* emmc_clkout */
+ <1 RK_PC5 1 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ emmc_cmd: emmc-cmd {
+ rockchip,pins =
+ /* emmc_cmd */
+ <1 RK_PC4 1 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ emmc_datastrobe: emmc-datastrobe {
+ rockchip,pins =
+ /* emmc_datastrobe */
+ <1 RK_PC6 1 &pcfg_pull_none>;
+ };
+ };
+
+ eth0 {
+ /omit-if-no-ref/
+ eth0_pins: eth0-pins {
+ rockchip,pins =
+ /* eth0_refclko25m */
+ <2 RK_PC1 2 &pcfg_pull_none>;
+ };
+ };
+
+ eth1 {
+ /omit-if-no-ref/
+ eth1m0_pins: eth1m0-pins {
+ rockchip,pins =
+ /* eth1_refclko25mm0 */
+ <3 RK_PB0 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ eth1m1_pins: eth1m1-pins {
+ rockchip,pins =
+ /* eth1_refclko25mm1 */
+ <4 RK_PB3 3 &pcfg_pull_none>;
+ };
+ };
+
+ flash {
+ /omit-if-no-ref/
+ flash_pins: flash-pins {
+ rockchip,pins =
+ /* flash_ale */
+ <1 RK_PD0 2 &pcfg_pull_none>,
+ /* flash_cle */
+ <1 RK_PC6 3 &pcfg_pull_none>,
+ /* flash_cs0n */
+ <1 RK_PD3 2 &pcfg_pull_none>,
+ /* flash_cs1n */
+ <1 RK_PD4 2 &pcfg_pull_none>,
+ /* flash_d0 */
+ <1 RK_PB4 2 &pcfg_pull_none>,
+ /* flash_d1 */
+ <1 RK_PB5 2 &pcfg_pull_none>,
+ /* flash_d2 */
+ <1 RK_PB6 2 &pcfg_pull_none>,
+ /* flash_d3 */
+ <1 RK_PB7 2 &pcfg_pull_none>,
+ /* flash_d4 */
+ <1 RK_PC0 2 &pcfg_pull_none>,
+ /* flash_d5 */
+ <1 RK_PC1 2 &pcfg_pull_none>,
+ /* flash_d6 */
+ <1 RK_PC2 2 &pcfg_pull_none>,
+ /* flash_d7 */
+ <1 RK_PC3 2 &pcfg_pull_none>,
+ /* flash_dqs */
+ <1 RK_PC5 2 &pcfg_pull_none>,
+ /* flash_rdn */
+ <1 RK_PD2 2 &pcfg_pull_none>,
+ /* flash_rdy */
+ <1 RK_PD1 2 &pcfg_pull_none>,
+ /* flash_volsel */
+ <0 RK_PA7 1 &pcfg_pull_none>,
+ /* flash_wpn */
+ <1 RK_PC7 3 &pcfg_pull_none>,
+ /* flash_wrn */
+ <1 RK_PC4 2 &pcfg_pull_none>;
+ };
+ };
+
+ fspi {
+ /omit-if-no-ref/
+ fspi_pins: fspi-pins {
+ rockchip,pins =
+ /* fspi_clk */
+ <1 RK_PD0 1 &pcfg_pull_none>,
+ /* fspi_cs0n */
+ <1 RK_PD3 1 &pcfg_pull_none>,
+ /* fspi_d0 */
+ <1 RK_PD1 1 &pcfg_pull_none>,
+ /* fspi_d1 */
+ <1 RK_PD2 1 &pcfg_pull_none>,
+ /* fspi_d2 */
+ <1 RK_PC7 2 &pcfg_pull_none>,
+ /* fspi_d3 */
+ <1 RK_PD4 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ fspi_cs1: fspi-cs1 {
+ rockchip,pins =
+ /* fspi_cs1n */
+ <1 RK_PC6 2 &pcfg_pull_up>;
+ };
+ };
+
+ gmac0 {
+ /omit-if-no-ref/
+ gmac0_miim: gmac0-miim {
+ rockchip,pins =
+ /* gmac0_mdc */
+ <2 RK_PC3 2 &pcfg_pull_none>,
+ /* gmac0_mdio */
+ <2 RK_PC4 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac0_clkinout: gmac0-clkinout {
+ rockchip,pins =
+ /* gmac0_mclkinout */
+ <2 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac0_rx_er: gmac0-rx-er {
+ rockchip,pins =
+ /* gmac0_rxer */
+ <2 RK_PC5 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac0_rx_bus2: gmac0-rx-bus2 {
+ rockchip,pins =
+ /* gmac0_rxd0 */
+ <2 RK_PB6 1 &pcfg_pull_none>,
+ /* gmac0_rxd1 */
+ <2 RK_PB7 2 &pcfg_pull_none>,
+ /* gmac0_rxdvcrs */
+ <2 RK_PC0 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac0_tx_bus2: gmac0-tx-bus2 {
+ rockchip,pins =
+ /* gmac0_txd0 */
+ <2 RK_PB3 1 &pcfg_pull_none_drv_level_2>,
+ /* gmac0_txd1 */
+ <2 RK_PB4 1 &pcfg_pull_none_drv_level_2>,
+ /* gmac0_txen */
+ <2 RK_PB5 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac0_rgmii_clk: gmac0-rgmii-clk {
+ rockchip,pins =
+ /* gmac0_rxclk */
+ <2 RK_PA5 2 &pcfg_pull_none>,
+ /* gmac0_txclk */
+ <2 RK_PB0 2 &pcfg_pull_none_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ gmac0_rgmii_bus: gmac0-rgmii-bus {
+ rockchip,pins =
+ /* gmac0_rxd2 */
+ <2 RK_PA3 2 &pcfg_pull_none>,
+ /* gmac0_rxd3 */
+ <2 RK_PA4 2 &pcfg_pull_none>,
+ /* gmac0_txd2 */
+ <2 RK_PA6 2 &pcfg_pull_none_drv_level_2>,
+ /* gmac0_txd3 */
+ <2 RK_PA7 2 &pcfg_pull_none_drv_level_2>;
+ };
+ };
+
+ gmac1 {
+ /omit-if-no-ref/
+ gmac1m0_miim: gmac1m0-miim {
+ rockchip,pins =
+ /* gmac1_mdcm0 */
+ <3 RK_PC4 3 &pcfg_pull_none>,
+ /* gmac1_mdiom0 */
+ <3 RK_PC5 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m0_clkinout: gmac1m0-clkinout {
+ rockchip,pins =
+ /* gmac1_mclkinoutm0 */
+ <3 RK_PC0 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m0_rx_er: gmac1m0-rx-er {
+ rockchip,pins =
+ /* gmac1_rxerm0 */
+ <3 RK_PB4 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
+ rockchip,pins =
+ /* gmac1_rxd0m0 */
+ <3 RK_PB1 3 &pcfg_pull_none>,
+ /* gmac1_rxd1m0 */
+ <3 RK_PB2 3 &pcfg_pull_none>,
+ /* gmac1_rxdvcrsm0 */
+ <3 RK_PB3 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
+ rockchip,pins =
+ /* gmac1_txd0m0 */
+ <3 RK_PB5 3 &pcfg_pull_none_drv_level_2>,
+ /* gmac1_txd1m0 */
+ <3 RK_PB6 3 &pcfg_pull_none_drv_level_2>,
+ /* gmac1_txenm0 */
+ <3 RK_PB7 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
+ rockchip,pins =
+ /* gmac1_rxclkm0 */
+ <3 RK_PA7 3 &pcfg_pull_none>,
+ /* gmac1_txclkm0 */
+ <3 RK_PA6 3 &pcfg_pull_none_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
+ rockchip,pins =
+ /* gmac1_rxd2m0 */
+ <3 RK_PA4 3 &pcfg_pull_none>,
+ /* gmac1_rxd3m0 */
+ <3 RK_PA5 3 &pcfg_pull_none>,
+ /* gmac1_txd2m0 */
+ <3 RK_PA2 3 &pcfg_pull_none_drv_level_2>,
+ /* gmac1_txd3m0 */
+ <3 RK_PA3 3 &pcfg_pull_none_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_miim: gmac1m1-miim {
+ rockchip,pins =
+ /* gmac1_mdcm1 */
+ <4 RK_PB6 3 &pcfg_pull_none>,
+ /* gmac1_mdiom1 */
+ <4 RK_PB7 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_clkinout: gmac1m1-clkinout {
+ rockchip,pins =
+ /* gmac1_mclkinoutm1 */
+ <4 RK_PC1 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_rx_er: gmac1m1-rx-er {
+ rockchip,pins =
+ /* gmac1_rxerm1 */
+ <4 RK_PB2 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_rx_bus2: gmac1m1-rx-bus2 {
+ rockchip,pins =
+ /* gmac1_rxd0m1 */
+ <4 RK_PA7 3 &pcfg_pull_none>,
+ /* gmac1_rxd1m1 */
+ <4 RK_PB0 3 &pcfg_pull_none>,
+ /* gmac1_rxdvcrsm1 */
+ <4 RK_PB1 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_tx_bus2: gmac1m1-tx-bus2 {
+ rockchip,pins =
+ /* gmac1_txd0m1 */
+ <4 RK_PA4 3 &pcfg_pull_none_drv_level_2>,
+ /* gmac1_txd1m1 */
+ <4 RK_PA5 3 &pcfg_pull_none_drv_level_2>,
+ /* gmac1_txenm1 */
+ <4 RK_PA6 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_rgmii_clk: gmac1m1-rgmii-clk {
+ rockchip,pins =
+ /* gmac1_rxclkm1 */
+ <4 RK_PA3 3 &pcfg_pull_none>,
+ /* gmac1_txclkm1 */
+ <4 RK_PA0 3 &pcfg_pull_none_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_rgmii_bus: gmac1m1-rgmii-bus {
+ rockchip,pins =
+ /* gmac1_rxd2m1 */
+ <4 RK_PA1 3 &pcfg_pull_none>,
+ /* gmac1_rxd3m1 */
+ <4 RK_PA2 3 &pcfg_pull_none>,
+ /* gmac1_txd2m1 */
+ <3 RK_PD6 3 &pcfg_pull_none_drv_level_2>,
+ /* gmac1_txd3m1 */
+ <3 RK_PD7 3 &pcfg_pull_none_drv_level_2>;
+ };
+ };
+
+ gpu {
+ /omit-if-no-ref/
+ gpu_pins: gpu-pins {
+ rockchip,pins =
+ /* gpu_avs */
+ <0 RK_PC0 2 &pcfg_pull_none>,
+ /* gpu_pwren */
+ <0 RK_PA6 4 &pcfg_pull_none>;
+ };
+ };
+
+ hdmitx {
+ /omit-if-no-ref/
+ hdmitxm0_cec: hdmitxm0-cec {
+ rockchip,pins =
+ /* hdmitxm0_cec */
+ <4 RK_PD1 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ hdmitxm1_cec: hdmitxm1-cec {
+ rockchip,pins =
+ /* hdmitxm1_cec */
+ <0 RK_PC7 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ hdmitx_scl: hdmitx-scl {
+ rockchip,pins =
+ /* hdmitx_scl */
+ <4 RK_PC7 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ hdmitx_sda: hdmitx-sda {
+ rockchip,pins =
+ /* hdmitx_sda */
+ <4 RK_PD0 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c0 {
+ /omit-if-no-ref/
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins =
+ /* i2c0_scl */
+ <0 RK_PB1 1 &pcfg_pull_none_smt>,
+ /* i2c0_sda */
+ <0 RK_PB2 1 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c1 {
+ /omit-if-no-ref/
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins =
+ /* i2c1_scl */
+ <0 RK_PB3 1 &pcfg_pull_none_smt>,
+ /* i2c1_sda */
+ <0 RK_PB4 1 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c2 {
+ /omit-if-no-ref/
+ i2c2m0_xfer: i2c2m0-xfer {
+ rockchip,pins =
+ /* i2c2_sclm0 */
+ <0 RK_PB5 1 &pcfg_pull_none_smt>,
+ /* i2c2_sdam0 */
+ <0 RK_PB6 1 &pcfg_pull_none_smt>;
+ };
+
+ /omit-if-no-ref/
+ i2c2m1_xfer: i2c2m1-xfer {
+ rockchip,pins =
+ /* i2c2_sclm1 */
+ <4 RK_PB5 1 &pcfg_pull_none_smt>,
+ /* i2c2_sdam1 */
+ <4 RK_PB4 1 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c3 {
+ /omit-if-no-ref/
+ i2c3m0_xfer: i2c3m0-xfer {
+ rockchip,pins =
+ /* i2c3_sclm0 */
+ <1 RK_PA1 1 &pcfg_pull_none_smt>,
+ /* i2c3_sdam0 */
+ <1 RK_PA0 1 &pcfg_pull_none_smt>;
+ };
+
+ /omit-if-no-ref/
+ i2c3m1_xfer: i2c3m1-xfer {
+ rockchip,pins =
+ /* i2c3_sclm1 */
+ <3 RK_PB5 4 &pcfg_pull_none_smt>,
+ /* i2c3_sdam1 */
+ <3 RK_PB6 4 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c4 {
+ /omit-if-no-ref/
+ i2c4m0_xfer: i2c4m0-xfer {
+ rockchip,pins =
+ /* i2c4_sclm0 */
+ <4 RK_PB3 1 &pcfg_pull_none_smt>,
+ /* i2c4_sdam0 */
+ <4 RK_PB2 1 &pcfg_pull_none_smt>;
+ };
+
+ /omit-if-no-ref/
+ i2c4m1_xfer: i2c4m1-xfer {
+ rockchip,pins =
+ /* i2c4_sclm1 */
+ <2 RK_PB2 2 &pcfg_pull_none_smt>,
+ /* i2c4_sdam1 */
+ <2 RK_PB1 2 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c5 {
+ /omit-if-no-ref/
+ i2c5m0_xfer: i2c5m0-xfer {
+ rockchip,pins =
+ /* i2c5_sclm0 */
+ <3 RK_PB3 4 &pcfg_pull_none_smt>,
+ /* i2c5_sdam0 */
+ <3 RK_PB4 4 &pcfg_pull_none_smt>;
+ };
+
+ /omit-if-no-ref/
+ i2c5m1_xfer: i2c5m1-xfer {
+ rockchip,pins =
+ /* i2c5_sclm1 */
+ <4 RK_PC7 2 &pcfg_pull_none_smt>,
+ /* i2c5_sdam1 */
+ <4 RK_PD0 2 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2s1 {
+ /omit-if-no-ref/
+ i2s1m0_lrckrx: i2s1m0-lrckrx {
+ rockchip,pins =
+ /* i2s1m0_lrckrx */
+ <1 RK_PA6 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_lrcktx: i2s1m0-lrcktx {
+ rockchip,pins =
+ /* i2s1m0_lrcktx */
+ <1 RK_PA5 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_mclk: i2s1m0-mclk {
+ rockchip,pins =
+ /* i2s1m0_mclk */
+ <1 RK_PA2 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sclkrx: i2s1m0-sclkrx {
+ rockchip,pins =
+ /* i2s1m0_sclkrx */
+ <1 RK_PA4 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sclktx: i2s1m0-sclktx {
+ rockchip,pins =
+ /* i2s1m0_sclktx */
+ <1 RK_PA3 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sdi0: i2s1m0-sdi0 {
+ rockchip,pins =
+ /* i2s1m0_sdi0 */
+ <1 RK_PB3 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sdi1: i2s1m0-sdi1 {
+ rockchip,pins =
+ /* i2s1m0_sdi1 */
+ <1 RK_PB2 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sdi2: i2s1m0-sdi2 {
+ rockchip,pins =
+ /* i2s1m0_sdi2 */
+ <1 RK_PB1 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sdi3: i2s1m0-sdi3 {
+ rockchip,pins =
+ /* i2s1m0_sdi3 */
+ <1 RK_PB0 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sdo0: i2s1m0-sdo0 {
+ rockchip,pins =
+ /* i2s1m0_sdo0 */
+ <1 RK_PA7 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sdo1: i2s1m0-sdo1 {
+ rockchip,pins =
+ /* i2s1m0_sdo1 */
+ <1 RK_PB0 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sdo2: i2s1m0-sdo2 {
+ rockchip,pins =
+ /* i2s1m0_sdo2 */
+ <1 RK_PB1 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m0_sdo3: i2s1m0-sdo3 {
+ rockchip,pins =
+ /* i2s1m0_sdo3 */
+ <1 RK_PB2 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_lrckrx: i2s1m1-lrckrx {
+ rockchip,pins =
+ /* i2s1m1_lrckrx */
+ <4 RK_PA7 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_lrcktx: i2s1m1-lrcktx {
+ rockchip,pins =
+ /* i2s1m1_lrcktx */
+ <3 RK_PD0 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_mclk: i2s1m1-mclk {
+ rockchip,pins =
+ /* i2s1m1_mclk */
+ <3 RK_PC6 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sclkrx: i2s1m1-sclkrx {
+ rockchip,pins =
+ /* i2s1m1_sclkrx */
+ <4 RK_PA6 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sclktx: i2s1m1-sclktx {
+ rockchip,pins =
+ /* i2s1m1_sclktx */
+ <3 RK_PC7 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sdi0: i2s1m1-sdi0 {
+ rockchip,pins =
+ /* i2s1m1_sdi0 */
+ <3 RK_PD2 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sdi1: i2s1m1-sdi1 {
+ rockchip,pins =
+ /* i2s1m1_sdi1 */
+ <3 RK_PD3 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sdi2: i2s1m1-sdi2 {
+ rockchip,pins =
+ /* i2s1m1_sdi2 */
+ <3 RK_PD4 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sdi3: i2s1m1-sdi3 {
+ rockchip,pins =
+ /* i2s1m1_sdi3 */
+ <3 RK_PD5 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sdo0: i2s1m1-sdo0 {
+ rockchip,pins =
+ /* i2s1m1_sdo0 */
+ <3 RK_PD1 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sdo1: i2s1m1-sdo1 {
+ rockchip,pins =
+ /* i2s1m1_sdo1 */
+ <4 RK_PB0 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sdo2: i2s1m1-sdo2 {
+ rockchip,pins =
+ /* i2s1m1_sdo2 */
+ <4 RK_PB1 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m1_sdo3: i2s1m1-sdo3 {
+ rockchip,pins =
+ /* i2s1m1_sdo3 */
+ <4 RK_PB5 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_lrckrx: i2s1m2-lrckrx {
+ rockchip,pins =
+ /* i2s1m2_lrckrx */
+ <3 RK_PC5 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_lrcktx: i2s1m2-lrcktx {
+ rockchip,pins =
+ /* i2s1m2_lrcktx */
+ <2 RK_PD2 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_mclk: i2s1m2-mclk {
+ rockchip,pins =
+ /* i2s1m2_mclk */
+ <2 RK_PD0 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sclkrx: i2s1m2-sclkrx {
+ rockchip,pins =
+ /* i2s1m2_sclkrx */
+ <3 RK_PC3 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sclktx: i2s1m2-sclktx {
+ rockchip,pins =
+ /* i2s1m2_sclktx */
+ <2 RK_PD1 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sdi0: i2s1m2-sdi0 {
+ rockchip,pins =
+ /* i2s1m2_sdi0 */
+ <2 RK_PD3 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sdi1: i2s1m2-sdi1 {
+ rockchip,pins =
+ /* i2s1m2_sdi1 */
+ <2 RK_PD4 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sdi2: i2s1m2-sdi2 {
+ rockchip,pins =
+ /* i2s1m2_sdi2 */
+ <2 RK_PD5 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sdi3: i2s1m2-sdi3 {
+ rockchip,pins =
+ /* i2s1m2_sdi3 */
+ <2 RK_PD6 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sdo0: i2s1m2-sdo0 {
+ rockchip,pins =
+ /* i2s1m2_sdo0 */
+ <2 RK_PD7 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sdo1: i2s1m2-sdo1 {
+ rockchip,pins =
+ /* i2s1m2_sdo1 */
+ <3 RK_PA0 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sdo2: i2s1m2-sdo2 {
+ rockchip,pins =
+ /* i2s1m2_sdo2 */
+ <3 RK_PC1 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s1m2_sdo3: i2s1m2-sdo3 {
+ rockchip,pins =
+ /* i2s1m2_sdo3 */
+ <3 RK_PC2 5 &pcfg_pull_none>;
+ };
+ };
+
+ i2s2 {
+ /omit-if-no-ref/
+ i2s2m0_lrckrx: i2s2m0-lrckrx {
+ rockchip,pins =
+ /* i2s2m0_lrckrx */
+ <2 RK_PC0 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m0_lrcktx: i2s2m0-lrcktx {
+ rockchip,pins =
+ /* i2s2m0_lrcktx */
+ <2 RK_PC3 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m0_mclk: i2s2m0-mclk {
+ rockchip,pins =
+ /* i2s2m0_mclk */
+ <2 RK_PC1 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m0_sclkrx: i2s2m0-sclkrx {
+ rockchip,pins =
+ /* i2s2m0_sclkrx */
+ <2 RK_PB7 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m0_sclktx: i2s2m0-sclktx {
+ rockchip,pins =
+ /* i2s2m0_sclktx */
+ <2 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m0_sdi: i2s2m0-sdi {
+ rockchip,pins =
+ /* i2s2m0_sdi */
+ <2 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m0_sdo: i2s2m0-sdo {
+ rockchip,pins =
+ /* i2s2m0_sdo */
+ <2 RK_PC4 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m1_lrckrx: i2s2m1-lrckrx {
+ rockchip,pins =
+ /* i2s2m1_lrckrx */
+ <4 RK_PA5 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m1_lrcktx: i2s2m1-lrcktx {
+ rockchip,pins =
+ /* i2s2m1_lrcktx */
+ <4 RK_PA4 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m1_mclk: i2s2m1-mclk {
+ rockchip,pins =
+ /* i2s2m1_mclk */
+ <4 RK_PB6 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m1_sclkrx: i2s2m1-sclkrx {
+ rockchip,pins =
+ /* i2s2m1_sclkrx */
+ <4 RK_PC1 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m1_sclktx: i2s2m1-sclktx {
+ rockchip,pins =
+ /* i2s2m1_sclktx */
+ <4 RK_PB7 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m1_sdi: i2s2m1-sdi {
+ rockchip,pins =
+ /* i2s2m1_sdi */
+ <4 RK_PB2 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s2m1_sdo: i2s2m1-sdo {
+ rockchip,pins =
+ /* i2s2m1_sdo */
+ <4 RK_PB3 5 &pcfg_pull_none>;
+ };
+ };
+
+ i2s3 {
+ /omit-if-no-ref/
+ i2s3m0_lrck: i2s3m0-lrck {
+ rockchip,pins =
+ /* i2s3m0_lrck */
+ <3 RK_PA4 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s3m0_mclk: i2s3m0-mclk {
+ rockchip,pins =
+ /* i2s3m0_mclk */
+ <3 RK_PA2 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s3m0_sclk: i2s3m0-sclk {
+ rockchip,pins =
+ /* i2s3m0_sclk */
+ <3 RK_PA3 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s3m0_sdi: i2s3m0-sdi {
+ rockchip,pins =
+ /* i2s3m0_sdi */
+ <3 RK_PA6 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s3m0_sdo: i2s3m0-sdo {
+ rockchip,pins =
+ /* i2s3m0_sdo */
+ <3 RK_PA5 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s3m1_lrck: i2s3m1-lrck {
+ rockchip,pins =
+ /* i2s3m1_lrck */
+ <4 RK_PC4 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s3m1_mclk: i2s3m1-mclk {
+ rockchip,pins =
+ /* i2s3m1_mclk */
+ <4 RK_PC2 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s3m1_sclk: i2s3m1-sclk {
+ rockchip,pins =
+ /* i2s3m1_sclk */
+ <4 RK_PC3 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s3m1_sdi: i2s3m1-sdi {
+ rockchip,pins =
+ /* i2s3m1_sdi */
+ <4 RK_PC6 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ i2s3m1_sdo: i2s3m1-sdo {
+ rockchip,pins =
+ /* i2s3m1_sdo */
+ <4 RK_PC5 5 &pcfg_pull_none>;
+ };
+ };
+
+ isp {
+ /omit-if-no-ref/
+ isp_pins: isp-pins {
+ rockchip,pins =
+ /* isp_flashtrigin */
+ <4 RK_PB4 4 &pcfg_pull_none>,
+ /* isp_flashtrigout */
+ <4 RK_PA6 1 &pcfg_pull_none>,
+ /* isp_prelighttrig */
+ <4 RK_PB1 1 &pcfg_pull_none>;
+ };
+ };
+
+ jtag {
+ /omit-if-no-ref/
+ jtag_pins: jtag-pins {
+ rockchip,pins =
+ /* jtag_tck */
+ <1 RK_PD7 2 &pcfg_pull_none>,
+ /* jtag_tms */
+ <2 RK_PA0 2 &pcfg_pull_none>;
+ };
+ };
+
+ lcdc {
+ /omit-if-no-ref/
+ lcdc_ctl: lcdc-ctl {
+ rockchip,pins =
+ /* lcdc_clk */
+ <3 RK_PA0 1 &pcfg_pull_none>,
+ /* lcdc_d0 */
+ <2 RK_PD0 1 &pcfg_pull_none>,
+ /* lcdc_d1 */
+ <2 RK_PD1 1 &pcfg_pull_none>,
+ /* lcdc_d2 */
+ <2 RK_PD2 1 &pcfg_pull_none>,
+ /* lcdc_d3 */
+ <2 RK_PD3 1 &pcfg_pull_none>,
+ /* lcdc_d4 */
+ <2 RK_PD4 1 &pcfg_pull_none>,
+ /* lcdc_d5 */
+ <2 RK_PD5 1 &pcfg_pull_none>,
+ /* lcdc_d6 */
+ <2 RK_PD6 1 &pcfg_pull_none>,
+ /* lcdc_d7 */
+ <2 RK_PD7 1 &pcfg_pull_none>,
+ /* lcdc_d8 */
+ <3 RK_PA1 1 &pcfg_pull_none>,
+ /* lcdc_d9 */
+ <3 RK_PA2 1 &pcfg_pull_none>,
+ /* lcdc_d10 */
+ <3 RK_PA3 1 &pcfg_pull_none>,
+ /* lcdc_d11 */
+ <3 RK_PA4 1 &pcfg_pull_none>,
+ /* lcdc_d12 */
+ <3 RK_PA5 1 &pcfg_pull_none>,
+ /* lcdc_d13 */
+ <3 RK_PA6 1 &pcfg_pull_none>,
+ /* lcdc_d14 */
+ <3 RK_PA7 1 &pcfg_pull_none>,
+ /* lcdc_d15 */
+ <3 RK_PB0 1 &pcfg_pull_none>,
+ /* lcdc_d16 */
+ <3 RK_PB1 1 &pcfg_pull_none>,
+ /* lcdc_d17 */
+ <3 RK_PB2 1 &pcfg_pull_none>,
+ /* lcdc_d18 */
+ <3 RK_PB3 1 &pcfg_pull_none>,
+ /* lcdc_d19 */
+ <3 RK_PB4 1 &pcfg_pull_none>,
+ /* lcdc_d20 */
+ <3 RK_PB5 1 &pcfg_pull_none>,
+ /* lcdc_d21 */
+ <3 RK_PB6 1 &pcfg_pull_none>,
+ /* lcdc_d22 */
+ <3 RK_PB7 1 &pcfg_pull_none>,
+ /* lcdc_d23 */
+ <3 RK_PC0 1 &pcfg_pull_none>,
+ /* lcdc_den */
+ <3 RK_PC3 1 &pcfg_pull_none>,
+ /* lcdc_hsync */
+ <3 RK_PC1 1 &pcfg_pull_none>,
+ /* lcdc_vsync */
+ <3 RK_PC2 1 &pcfg_pull_none>;
+ };
+ };
+
+ mcu {
+ /omit-if-no-ref/
+ mcu_pins: mcu-pins {
+ rockchip,pins =
+ /* mcu_jtagtck */
+ <0 RK_PB4 4 &pcfg_pull_none>,
+ /* mcu_jtagtdi */
+ <0 RK_PC1 4 &pcfg_pull_none>,
+ /* mcu_jtagtdo */
+ <0 RK_PB3 4 &pcfg_pull_none>,
+ /* mcu_jtagtms */
+ <0 RK_PC2 4 &pcfg_pull_none>,
+ /* mcu_jtagtrstn */
+ <0 RK_PC3 4 &pcfg_pull_none>;
+ };
+ };
+
+ npu {
+ /omit-if-no-ref/
+ npu_pins: npu-pins {
+ rockchip,pins =
+ /* npu_avs */
+ <0 RK_PC1 2 &pcfg_pull_none>;
+ };
+ };
+
+ pcie20 {
+ /omit-if-no-ref/
+ pcie20m0_pins: pcie20m0-pins {
+ rockchip,pins =
+ /* pcie20_clkreqnm0 */
+ <0 RK_PA5 3 &pcfg_pull_none>,
+ /* pcie20_perstnm0 */
+ <0 RK_PB6 3 &pcfg_pull_none>,
+ /* pcie20_wakenm0 */
+ <0 RK_PB5 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pcie20m1_pins: pcie20m1-pins {
+ rockchip,pins =
+ /* pcie20_clkreqnm1 */
+ <2 RK_PD0 4 &pcfg_pull_none>,
+ /* pcie20_perstnm1 */
+ <3 RK_PC1 4 &pcfg_pull_none>,
+ /* pcie20_wakenm1 */
+ <2 RK_PD1 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pcie20m2_pins: pcie20m2-pins {
+ rockchip,pins =
+ /* pcie20_clkreqnm2 */
+ <1 RK_PB0 4 &pcfg_pull_none>,
+ /* pcie20_perstnm2 */
+ <1 RK_PB2 4 &pcfg_pull_none>,
+ /* pcie20_wakenm2 */
+ <1 RK_PB1 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pcie20_buttonrstn: pcie20-buttonrstn {
+ rockchip,pins =
+ /* pcie20_buttonrstn */
+ <0 RK_PB4 3 &pcfg_pull_none>;
+ };
+ };
+
+ pcie30x1 {
+ /omit-if-no-ref/
+ pcie30x1m0_pins: pcie30x1m0-pins {
+ rockchip,pins =
+ /* pcie30x1_clkreqnm0 */
+ <0 RK_PA4 3 &pcfg_pull_none>,
+ /* pcie30x1_perstnm0 */
+ <0 RK_PC3 3 &pcfg_pull_none>,
+ /* pcie30x1_wakenm0 */
+ <0 RK_PC2 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pcie30x1m1_pins: pcie30x1m1-pins {
+ rockchip,pins =
+ /* pcie30x1_clkreqnm1 */
+ <2 RK_PD2 4 &pcfg_pull_none>,
+ /* pcie30x1_perstnm1 */
+ <3 RK_PA1 4 &pcfg_pull_none>,
+ /* pcie30x1_wakenm1 */
+ <2 RK_PD3 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pcie30x1m2_pins: pcie30x1m2-pins {
+ rockchip,pins =
+ /* pcie30x1_clkreqnm2 */
+ <1 RK_PA5 4 &pcfg_pull_none>,
+ /* pcie30x1_perstnm2 */
+ <1 RK_PA2 4 &pcfg_pull_none>,
+ /* pcie30x1_wakenm2 */
+ <1 RK_PA3 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pcie30x1_buttonrstn: pcie30x1-buttonrstn {
+ rockchip,pins =
+ /* pcie30x1_buttonrstn */
+ <0 RK_PB3 3 &pcfg_pull_none>;
+ };
+ };
+
+ pcie30x2 {
+ /omit-if-no-ref/
+ pcie30x2m0_pins: pcie30x2m0-pins {
+ rockchip,pins =
+ /* pcie30x2_clkreqnm0 */
+ <0 RK_PA6 2 &pcfg_pull_none>,
+ /* pcie30x2_perstnm0 */
+ <0 RK_PC6 3 &pcfg_pull_none>,
+ /* pcie30x2_wakenm0 */
+ <0 RK_PC5 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pcie30x2m1_pins: pcie30x2m1-pins {
+ rockchip,pins =
+ /* pcie30x2_clkreqnm1 */
+ <2 RK_PD4 4 &pcfg_pull_none>,
+ /* pcie30x2_perstnm1 */
+ <2 RK_PD6 4 &pcfg_pull_none>,
+ /* pcie30x2_wakenm1 */
+ <2 RK_PD5 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pcie30x2m2_pins: pcie30x2m2-pins {
+ rockchip,pins =
+ /* pcie30x2_clkreqnm2 */
+ <4 RK_PC2 4 &pcfg_pull_none>,
+ /* pcie30x2_perstnm2 */
+ <4 RK_PC4 4 &pcfg_pull_none>,
+ /* pcie30x2_wakenm2 */
+ <4 RK_PC3 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pcie30x2_buttonrstn: pcie30x2-buttonrstn {
+ rockchip,pins =
+ /* pcie30x2_buttonrstn */
+ <0 RK_PB0 3 &pcfg_pull_none>;
+ };
+ };
+
+ pdm {
+ /omit-if-no-ref/
+ pdmm0_clk: pdmm0-clk {
+ rockchip,pins =
+ /* pdm_clk0m0 */
+ <1 RK_PA6 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm0_clk1: pdmm0-clk1 {
+ rockchip,pins =
+ /* pdmm0_clk1 */
+ <1 RK_PA4 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm0_sdi0: pdmm0-sdi0 {
+ rockchip,pins =
+ /* pdmm0_sdi0 */
+ <1 RK_PB3 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm0_sdi1: pdmm0-sdi1 {
+ rockchip,pins =
+ /* pdmm0_sdi1 */
+ <1 RK_PB2 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm0_sdi2: pdmm0-sdi2 {
+ rockchip,pins =
+ /* pdmm0_sdi2 */
+ <1 RK_PB1 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm0_sdi3: pdmm0-sdi3 {
+ rockchip,pins =
+ /* pdmm0_sdi3 */
+ <1 RK_PB0 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm1_clk: pdmm1-clk {
+ rockchip,pins =
+ /* pdm_clk0m1 */
+ <3 RK_PD6 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm1_clk1: pdmm1-clk1 {
+ rockchip,pins =
+ /* pdmm1_clk1 */
+ <4 RK_PA0 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm1_sdi0: pdmm1-sdi0 {
+ rockchip,pins =
+ /* pdmm1_sdi0 */
+ <3 RK_PD7 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm1_sdi1: pdmm1-sdi1 {
+ rockchip,pins =
+ /* pdmm1_sdi1 */
+ <4 RK_PA1 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm1_sdi2: pdmm1-sdi2 {
+ rockchip,pins =
+ /* pdmm1_sdi2 */
+ <4 RK_PA2 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm1_sdi3: pdmm1-sdi3 {
+ rockchip,pins =
+ /* pdmm1_sdi3 */
+ <4 RK_PA3 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm2_clk1: pdmm2-clk1 {
+ rockchip,pins =
+ /* pdmm2_clk1 */
+ <3 RK_PC4 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm2_sdi0: pdmm2-sdi0 {
+ rockchip,pins =
+ /* pdmm2_sdi0 */
+ <3 RK_PB3 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm2_sdi1: pdmm2-sdi1 {
+ rockchip,pins =
+ /* pdmm2_sdi1 */
+ <3 RK_PB4 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm2_sdi2: pdmm2-sdi2 {
+ rockchip,pins =
+ /* pdmm2_sdi2 */
+ <3 RK_PB7 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pdmm2_sdi3: pdmm2-sdi3 {
+ rockchip,pins =
+ /* pdmm2_sdi3 */
+ <3 RK_PC0 5 &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ /omit-if-no-ref/
+ pmic_pins: pmic-pins {
+ rockchip,pins =
+ /* pmic_sleep */
+ <0 RK_PA2 1 &pcfg_pull_none>;
+ };
+ };
+
+ pmu {
+ /omit-if-no-ref/
+ pmu_pins: pmu-pins {
+ rockchip,pins =
+ /* pmu_debug0 */
+ <0 RK_PA5 4 &pcfg_pull_none>,
+ /* pmu_debug1 */
+ <0 RK_PA6 3 &pcfg_pull_none>,
+ /* pmu_debug2 */
+ <0 RK_PC4 4 &pcfg_pull_none>,
+ /* pmu_debug3 */
+ <0 RK_PC5 4 &pcfg_pull_none>,
+ /* pmu_debug4 */
+ <0 RK_PC6 4 &pcfg_pull_none>,
+ /* pmu_debug5 */
+ <0 RK_PC7 4 &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ /omit-if-no-ref/
+ pwm0m0_pins: pwm0m0-pins {
+ rockchip,pins =
+ /* pwm0_m0 */
+ <0 RK_PB7 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm0m1_pins: pwm0m1-pins {
+ rockchip,pins =
+ /* pwm0_m1 */
+ <0 RK_PC7 2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ /omit-if-no-ref/
+ pwm1m0_pins: pwm1m0-pins {
+ rockchip,pins =
+ /* pwm1_m0 */
+ <0 RK_PC0 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm1m1_pins: pwm1m1-pins {
+ rockchip,pins =
+ /* pwm1_m1 */
+ <0 RK_PB5 4 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ /omit-if-no-ref/
+ pwm2m0_pins: pwm2m0-pins {
+ rockchip,pins =
+ /* pwm2_m0 */
+ <0 RK_PC1 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm2m1_pins: pwm2m1-pins {
+ rockchip,pins =
+ /* pwm2_m1 */
+ <0 RK_PB6 4 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ /omit-if-no-ref/
+ pwm3_pins: pwm3-pins {
+ rockchip,pins =
+ /* pwm3_ir */
+ <0 RK_PC2 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm4 {
+ /omit-if-no-ref/
+ pwm4_pins: pwm4-pins {
+ rockchip,pins =
+ /* pwm4 */
+ <0 RK_PC3 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm5 {
+ /omit-if-no-ref/
+ pwm5_pins: pwm5-pins {
+ rockchip,pins =
+ /* pwm5 */
+ <0 RK_PC4 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm6 {
+ /omit-if-no-ref/
+ pwm6_pins: pwm6-pins {
+ rockchip,pins =
+ /* pwm6 */
+ <0 RK_PC5 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm7 {
+ /omit-if-no-ref/
+ pwm7_pins: pwm7-pins {
+ rockchip,pins =
+ /* pwm7_ir */
+ <0 RK_PC6 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm8 {
+ /omit-if-no-ref/
+ pwm8m0_pins: pwm8m0-pins {
+ rockchip,pins =
+ /* pwm8_m0 */
+ <3 RK_PB1 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm8m1_pins: pwm8m1-pins {
+ rockchip,pins =
+ /* pwm8_m1 */
+ <1 RK_PD5 4 &pcfg_pull_none>;
+ };
+ };
+
+ pwm9 {
+ /omit-if-no-ref/
+ pwm9m0_pins: pwm9m0-pins {
+ rockchip,pins =
+ /* pwm9_m0 */
+ <3 RK_PB2 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm9m1_pins: pwm9m1-pins {
+ rockchip,pins =
+ /* pwm9_m1 */
+ <1 RK_PD6 4 &pcfg_pull_none>;
+ };
+ };
+
+ pwm10 {
+ /omit-if-no-ref/
+ pwm10m0_pins: pwm10m0-pins {
+ rockchip,pins =
+ /* pwm10_m0 */
+ <3 RK_PB5 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm10m1_pins: pwm10m1-pins {
+ rockchip,pins =
+ /* pwm10_m1 */
+ <2 RK_PA1 2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm11 {
+ /omit-if-no-ref/
+ pwm11m0_pins: pwm11m0-pins {
+ rockchip,pins =
+ /* pwm11_irm0 */
+ <3 RK_PB6 5 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm11m1_pins: pwm11m1-pins {
+ rockchip,pins =
+ /* pwm11_irm1 */
+ <4 RK_PC0 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm12 {
+ /omit-if-no-ref/
+ pwm12m0_pins: pwm12m0-pins {
+ rockchip,pins =
+ /* pwm12_m0 */
+ <3 RK_PB7 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm12m1_pins: pwm12m1-pins {
+ rockchip,pins =
+ /* pwm12_m1 */
+ <4 RK_PC5 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm13 {
+ /omit-if-no-ref/
+ pwm13m0_pins: pwm13m0-pins {
+ rockchip,pins =
+ /* pwm13_m0 */
+ <3 RK_PC0 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm13m1_pins: pwm13m1-pins {
+ rockchip,pins =
+ /* pwm13_m1 */
+ <4 RK_PC6 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm14 {
+ /omit-if-no-ref/
+ pwm14m0_pins: pwm14m0-pins {
+ rockchip,pins =
+ /* pwm14_m0 */
+ <3 RK_PC4 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm14m1_pins: pwm14m1-pins {
+ rockchip,pins =
+ /* pwm14_m1 */
+ <4 RK_PC2 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm15 {
+ /omit-if-no-ref/
+ pwm15m0_pins: pwm15m0-pins {
+ rockchip,pins =
+ /* pwm15_irm0 */
+ <3 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ pwm15m1_pins: pwm15m1-pins {
+ rockchip,pins =
+ /* pwm15_irm1 */
+ <4 RK_PC3 1 &pcfg_pull_none>;
+ };
+ };
+
+ refclk {
+ /omit-if-no-ref/
+ refclk_pins: refclk-pins {
+ rockchip,pins =
+ /* refclk_ou */
+ <0 RK_PA0 1 &pcfg_pull_none>;
+ };
+ };
+
+ sata {
+ /omit-if-no-ref/
+ sata_pins: sata-pins {
+ rockchip,pins =
+ /* sata_cpdet */
+ <0 RK_PA4 2 &pcfg_pull_none>,
+ /* sata_cppod */
+ <0 RK_PA6 1 &pcfg_pull_none>,
+ /* sata_mpswitch */
+ <0 RK_PA5 2 &pcfg_pull_none>;
+ };
+ };
+
+ sata0 {
+ /omit-if-no-ref/
+ sata0_pins: sata0-pins {
+ rockchip,pins =
+ /* sata0_actled */
+ <4 RK_PC6 3 &pcfg_pull_none>;
+ };
+ };
+
+ sata1 {
+ /omit-if-no-ref/
+ sata1_pins: sata1-pins {
+ rockchip,pins =
+ /* sata1_actled */
+ <4 RK_PC5 3 &pcfg_pull_none>;
+ };
+ };
+
+ sata2 {
+ /omit-if-no-ref/
+ sata2_pins: sata2-pins {
+ rockchip,pins =
+ /* sata2_actled */
+ <4 RK_PC4 3 &pcfg_pull_none>;
+ };
+ };
+
+ scr {
+ /omit-if-no-ref/
+ scr_pins: scr-pins {
+ rockchip,pins =
+ /* scr_clk */
+ <1 RK_PA2 3 &pcfg_pull_none>,
+ /* scr_det */
+ <1 RK_PA7 3 &pcfg_pull_up>,
+ /* scr_io */
+ <1 RK_PA3 3 &pcfg_pull_up>,
+ /* scr_rst */
+ <1 RK_PA5 3 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc0 {
+ /omit-if-no-ref/
+ sdmmc0_bus4: sdmmc0-bus4 {
+ rockchip,pins =
+ /* sdmmc0_d0 */
+ <1 RK_PD5 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc0_d1 */
+ <1 RK_PD6 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc0_d2 */
+ <1 RK_PD7 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc0_d3 */
+ <2 RK_PA0 1 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc0_clk: sdmmc0-clk {
+ rockchip,pins =
+ /* sdmmc0_clk */
+ <2 RK_PA2 1 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc0_cmd: sdmmc0-cmd {
+ rockchip,pins =
+ /* sdmmc0_cmd */
+ <2 RK_PA1 1 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc0_det: sdmmc0-det {
+ rockchip,pins =
+ /* sdmmc0_det */
+ <0 RK_PA4 1 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc0_pwren: sdmmc0-pwren {
+ rockchip,pins =
+ /* sdmmc0_pwren */
+ <0 RK_PA5 1 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc1 {
+ /omit-if-no-ref/
+ sdmmc1_bus4: sdmmc1-bus4 {
+ rockchip,pins =
+ /* sdmmc1_d0 */
+ <2 RK_PA3 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc1_d1 */
+ <2 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc1_d2 */
+ <2 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc1_d3 */
+ <2 RK_PA6 1 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc1_clk: sdmmc1-clk {
+ rockchip,pins =
+ /* sdmmc1_clk */
+ <2 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc1_cmd: sdmmc1-cmd {
+ rockchip,pins =
+ /* sdmmc1_cmd */
+ <2 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc1_det: sdmmc1-det {
+ rockchip,pins =
+ /* sdmmc1_det */
+ <2 RK_PB2 1 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc1_pwren: sdmmc1-pwren {
+ rockchip,pins =
+ /* sdmmc1_pwren */
+ <2 RK_PB1 1 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc2 {
+ /omit-if-no-ref/
+ sdmmc2m0_bus4: sdmmc2m0-bus4 {
+ rockchip,pins =
+ /* sdmmc2_d0m0 */
+ <3 RK_PC6 3 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc2_d1m0 */
+ <3 RK_PC7 3 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc2_d2m0 */
+ <3 RK_PD0 3 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc2_d3m0 */
+ <3 RK_PD1 3 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc2m0_clk: sdmmc2m0-clk {
+ rockchip,pins =
+ /* sdmmc2_clkm0 */
+ <3 RK_PD3 3 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc2m0_cmd: sdmmc2m0-cmd {
+ rockchip,pins =
+ /* sdmmc2_cmdm0 */
+ <3 RK_PD2 3 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc2m0_det: sdmmc2m0-det {
+ rockchip,pins =
+ /* sdmmc2_detm0 */
+ <3 RK_PD4 3 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc2m0_pwren: sdmmc2m0-pwren {
+ rockchip,pins =
+ /* sdmmc2m0_pwren */
+ <3 RK_PD5 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc2m1_bus4: sdmmc2m1-bus4 {
+ rockchip,pins =
+ /* sdmmc2_d0m1 */
+ <3 RK_PA1 5 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc2_d1m1 */
+ <3 RK_PA2 5 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc2_d2m1 */
+ <3 RK_PA3 5 &pcfg_pull_up_drv_level_2>,
+ /* sdmmc2_d3m1 */
+ <3 RK_PA4 5 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc2m1_clk: sdmmc2m1-clk {
+ rockchip,pins =
+ /* sdmmc2_clkm1 */
+ <3 RK_PA6 5 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc2m1_cmd: sdmmc2m1-cmd {
+ rockchip,pins =
+ /* sdmmc2_cmdm1 */
+ <3 RK_PA5 5 &pcfg_pull_up_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc2m1_det: sdmmc2m1-det {
+ rockchip,pins =
+ /* sdmmc2_detm1 */
+ <3 RK_PA7 4 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ sdmmc2m1_pwren: sdmmc2m1-pwren {
+ rockchip,pins =
+ /* sdmmc2m1_pwren */
+ <3 RK_PB0 4 &pcfg_pull_none>;
+ };
+ };
+
+ spdif {
+ /omit-if-no-ref/
+ spdifm0_tx: spdifm0-tx {
+ rockchip,pins =
+ /* spdifm0_tx */
+ <1 RK_PA4 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spdifm1_tx: spdifm1-tx {
+ rockchip,pins =
+ /* spdifm1_tx */
+ <3 RK_PC5 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spdifm2_tx: spdifm2-tx {
+ rockchip,pins =
+ /* spdifm2_tx */
+ <4 RK_PC4 2 &pcfg_pull_none>;
+ };
+ };
+
+ spi0 {
+ /omit-if-no-ref/
+ spi0m0_pins: spi0m0-pins {
+ rockchip,pins =
+ /* spi0_clkm0 */
+ <0 RK_PB5 2 &pcfg_pull_none>,
+ /* spi0_misom0 */
+ <0 RK_PC5 2 &pcfg_pull_none>,
+ /* spi0_mosim0 */
+ <0 RK_PB6 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi0m0_cs0: spi0m0-cs0 {
+ rockchip,pins =
+ /* spi0_cs0m0 */
+ <0 RK_PC6 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi0m0_cs1: spi0m0-cs1 {
+ rockchip,pins =
+ /* spi0_cs1m0 */
+ <0 RK_PC4 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi0m1_pins: spi0m1-pins {
+ rockchip,pins =
+ /* spi0_clkm1 */
+ <2 RK_PD3 3 &pcfg_pull_none>,
+ /* spi0_misom1 */
+ <2 RK_PD0 3 &pcfg_pull_none>,
+ /* spi0_mosim1 */
+ <2 RK_PD1 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi0m1_cs0: spi0m1-cs0 {
+ rockchip,pins =
+ /* spi0_cs0m1 */
+ <2 RK_PD2 3 &pcfg_pull_none>;
+ };
+ };
+
+ spi1 {
+ /omit-if-no-ref/
+ spi1m0_pins: spi1m0-pins {
+ rockchip,pins =
+ /* spi1_clkm0 */
+ <2 RK_PB5 3 &pcfg_pull_none>,
+ /* spi1_misom0 */
+ <2 RK_PB6 3 &pcfg_pull_none>,
+ /* spi1_mosim0 */
+ <2 RK_PB7 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi1m0_cs0: spi1m0-cs0 {
+ rockchip,pins =
+ /* spi1_cs0m0 */
+ <2 RK_PC0 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi1m0_cs1: spi1m0-cs1 {
+ rockchip,pins =
+ /* spi1_cs1m0 */
+ <2 RK_PC6 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi1m1_pins: spi1m1-pins {
+ rockchip,pins =
+ /* spi1_clkm1 */
+ <3 RK_PC3 3 &pcfg_pull_none>,
+ /* spi1_misom1 */
+ <3 RK_PC2 3 &pcfg_pull_none>,
+ /* spi1_mosim1 */
+ <3 RK_PC1 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi1m1_cs0: spi1m1-cs0 {
+ rockchip,pins =
+ /* spi1_cs0m1 */
+ <3 RK_PA1 3 &pcfg_pull_none>;
+ };
+ };
+
+ spi2 {
+ /omit-if-no-ref/
+ spi2m0_pins: spi2m0-pins {
+ rockchip,pins =
+ /* spi2_clkm0 */
+ <2 RK_PC1 4 &pcfg_pull_none>,
+ /* spi2_misom0 */
+ <2 RK_PC2 4 &pcfg_pull_none>,
+ /* spi2_mosim0 */
+ <2 RK_PC3 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi2m0_cs0: spi2m0-cs0 {
+ rockchip,pins =
+ /* spi2_cs0m0 */
+ <2 RK_PC4 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi2m0_cs1: spi2m0-cs1 {
+ rockchip,pins =
+ /* spi2_cs1m0 */
+ <2 RK_PC5 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi2m1_pins: spi2m1-pins {
+ rockchip,pins =
+ /* spi2_clkm1 */
+ <3 RK_PA0 3 &pcfg_pull_none>,
+ /* spi2_misom1 */
+ <2 RK_PD7 3 &pcfg_pull_none>,
+ /* spi2_mosim1 */
+ <2 RK_PD6 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi2m1_cs0: spi2m1-cs0 {
+ rockchip,pins =
+ /* spi2_cs0m1 */
+ <2 RK_PD5 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi2m1_cs1: spi2m1-cs1 {
+ rockchip,pins =
+ /* spi2_cs1m1 */
+ <2 RK_PD4 3 &pcfg_pull_none>;
+ };
+ };
+
+ spi3 {
+ /omit-if-no-ref/
+ spi3m0_pins: spi3m0-pins {
+ rockchip,pins =
+ /* spi3_clkm0 */
+ <4 RK_PB3 4 &pcfg_pull_none>,
+ /* spi3_misom0 */
+ <4 RK_PB0 4 &pcfg_pull_none>,
+ /* spi3_mosim0 */
+ <4 RK_PB2 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi3m0_cs0: spi3m0-cs0 {
+ rockchip,pins =
+ /* spi3_cs0m0 */
+ <4 RK_PA6 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi3m0_cs1: spi3m0-cs1 {
+ rockchip,pins =
+ /* spi3_cs1m0 */
+ <4 RK_PA7 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi3m1_pins: spi3m1-pins {
+ rockchip,pins =
+ /* spi3_clkm1 */
+ <4 RK_PC2 2 &pcfg_pull_none>,
+ /* spi3_misom1 */
+ <4 RK_PC5 2 &pcfg_pull_none>,
+ /* spi3_mosim1 */
+ <4 RK_PC3 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi3m1_cs0: spi3m1-cs0 {
+ rockchip,pins =
+ /* spi3_cs0m1 */
+ <4 RK_PC6 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ spi3m1_cs1: spi3m1-cs1 {
+ rockchip,pins =
+ /* spi3_cs1m1 */
+ <4 RK_PD1 2 &pcfg_pull_none>;
+ };
+ };
+
+ tsadc {
+ /omit-if-no-ref/
+ tsadcm0_shut: tsadcm0-shut {
+ rockchip,pins =
+ /* tsadcm0_shut */
+ <0 RK_PA1 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ tsadcm1_shut: tsadcm1-shut {
+ rockchip,pins =
+ /* tsadcm1_shut */
+ <0 RK_PA2 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ tsadc_shutorg: tsadc-shutorg {
+ rockchip,pins =
+ /* tsadc_shutorg */
+ <0 RK_PA1 2 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ /omit-if-no-ref/
+ uart0_xfer: uart0-xfer {
+ rockchip,pins =
+ /* uart0_rx */
+ <0 RK_PC0 3 &pcfg_pull_up>,
+ /* uart0_tx */
+ <0 RK_PC1 3 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart0_ctsn: uart0-ctsn {
+ rockchip,pins =
+ /* uart0_ctsn */
+ <0 RK_PC7 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart0_rtsn: uart0-rtsn {
+ rockchip,pins =
+ /* uart0_rtsn */
+ <0 RK_PC4 3 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ /omit-if-no-ref/
+ uart1m0_xfer: uart1m0-xfer {
+ rockchip,pins =
+ /* uart1_rxm0 */
+ <2 RK_PB3 2 &pcfg_pull_up>,
+ /* uart1_txm0 */
+ <2 RK_PB4 2 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart1m0_ctsn: uart1m0-ctsn {
+ rockchip,pins =
+ /* uart1m0_ctsn */
+ <2 RK_PB6 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart1m0_rtsn: uart1m0-rtsn {
+ rockchip,pins =
+ /* uart1m0_rtsn */
+ <2 RK_PB5 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart1m1_xfer: uart1m1-xfer {
+ rockchip,pins =
+ /* uart1_rxm1 */
+ <3 RK_PD7 4 &pcfg_pull_up>,
+ /* uart1_txm1 */
+ <3 RK_PD6 4 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart1m1_ctsn: uart1m1-ctsn {
+ rockchip,pins =
+ /* uart1m1_ctsn */
+ <4 RK_PC1 4 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart1m1_rtsn: uart1m1-rtsn {
+ rockchip,pins =
+ /* uart1m1_rtsn */
+ <4 RK_PB6 4 &pcfg_pull_none>;
+ };
+ };
+
+ uart2 {
+ /omit-if-no-ref/
+ uart2m0_xfer: uart2m0-xfer {
+ rockchip,pins =
+ /* uart2_rxm0 */
+ <0 RK_PD0 1 &pcfg_pull_up>,
+ /* uart2_txm0 */
+ <0 RK_PD1 1 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart2m1_xfer: uart2m1-xfer {
+ rockchip,pins =
+ /* uart2_rxm1 */
+ <1 RK_PD6 2 &pcfg_pull_up>,
+ /* uart2_txm1 */
+ <1 RK_PD5 2 &pcfg_pull_up>;
+ };
+ };
+
+ uart3 {
+ /omit-if-no-ref/
+ uart3m0_xfer: uart3m0-xfer {
+ rockchip,pins =
+ /* uart3_rxm0 */
+ <1 RK_PA0 2 &pcfg_pull_up>,
+ /* uart3_txm0 */
+ <1 RK_PA1 2 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart3m0_ctsn: uart3m0-ctsn {
+ rockchip,pins =
+ /* uart3m0_ctsn */
+ <1 RK_PA3 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart3m0_rtsn: uart3m0-rtsn {
+ rockchip,pins =
+ /* uart3m0_rtsn */
+ <1 RK_PA2 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart3m1_xfer: uart3m1-xfer {
+ rockchip,pins =
+ /* uart3_rxm1 */
+ <3 RK_PC0 4 &pcfg_pull_up>,
+ /* uart3_txm1 */
+ <3 RK_PB7 4 &pcfg_pull_up>;
+ };
+ };
+
+ uart4 {
+ /omit-if-no-ref/
+ uart4m0_xfer: uart4m0-xfer {
+ rockchip,pins =
+ /* uart4_rxm0 */
+ <1 RK_PA4 2 &pcfg_pull_up>,
+ /* uart4_txm0 */
+ <1 RK_PA6 2 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart4m0_ctsn: uart4m0-ctsn {
+ rockchip,pins =
+ /* uart4m0_ctsn */
+ <1 RK_PA7 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart4m0_rtsn: uart4m0-rtsn {
+ rockchip,pins =
+ /* uart4m0_rtsn */
+ <1 RK_PA5 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart4m1_xfer: uart4m1-xfer {
+ rockchip,pins =
+ /* uart4_rxm1 */
+ <3 RK_PB1 4 &pcfg_pull_up>,
+ /* uart4_txm1 */
+ <3 RK_PB2 4 &pcfg_pull_up>;
+ };
+ };
+
+ uart5 {
+ /omit-if-no-ref/
+ uart5m0_xfer: uart5m0-xfer {
+ rockchip,pins =
+ /* uart5_rxm0 */
+ <2 RK_PA1 3 &pcfg_pull_up>,
+ /* uart5_txm0 */
+ <2 RK_PA2 3 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart5m0_ctsn: uart5m0-ctsn {
+ rockchip,pins =
+ /* uart5m0_ctsn */
+ <1 RK_PD7 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart5m0_rtsn: uart5m0-rtsn {
+ rockchip,pins =
+ /* uart5m0_rtsn */
+ <2 RK_PA0 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart5m1_xfer: uart5m1-xfer {
+ rockchip,pins =
+ /* uart5_rxm1 */
+ <3 RK_PC3 4 &pcfg_pull_up>,
+ /* uart5_txm1 */
+ <3 RK_PC2 4 &pcfg_pull_up>;
+ };
+ };
+
+ uart6 {
+ /omit-if-no-ref/
+ uart6m0_xfer: uart6m0-xfer {
+ rockchip,pins =
+ /* uart6_rxm0 */
+ <2 RK_PA3 3 &pcfg_pull_up>,
+ /* uart6_txm0 */
+ <2 RK_PA4 3 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart6m0_ctsn: uart6m0-ctsn {
+ rockchip,pins =
+ /* uart6m0_ctsn */
+ <2 RK_PC0 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart6m0_rtsn: uart6m0-rtsn {
+ rockchip,pins =
+ /* uart6m0_rtsn */
+ <2 RK_PB7 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart6m1_xfer: uart6m1-xfer {
+ rockchip,pins =
+ /* uart6_rxm1 */
+ <1 RK_PD6 3 &pcfg_pull_up>,
+ /* uart6_txm1 */
+ <1 RK_PD5 3 &pcfg_pull_up>;
+ };
+ };
+
+ uart7 {
+ /omit-if-no-ref/
+ uart7m0_xfer: uart7m0-xfer {
+ rockchip,pins =
+ /* uart7_rxm0 */
+ <2 RK_PA5 3 &pcfg_pull_up>,
+ /* uart7_txm0 */
+ <2 RK_PA6 3 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart7m0_ctsn: uart7m0-ctsn {
+ rockchip,pins =
+ /* uart7m0_ctsn */
+ <2 RK_PC2 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart7m0_rtsn: uart7m0-rtsn {
+ rockchip,pins =
+ /* uart7m0_rtsn */
+ <2 RK_PC1 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart7m1_xfer: uart7m1-xfer {
+ rockchip,pins =
+ /* uart7_rxm1 */
+ <3 RK_PC5 4 &pcfg_pull_up>,
+ /* uart7_txm1 */
+ <3 RK_PC4 4 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart7m2_xfer: uart7m2-xfer {
+ rockchip,pins =
+ /* uart7_rxm2 */
+ <4 RK_PA3 4 &pcfg_pull_up>,
+ /* uart7_txm2 */
+ <4 RK_PA2 4 &pcfg_pull_up>;
+ };
+ };
+
+ uart8 {
+ /omit-if-no-ref/
+ uart8m0_xfer: uart8m0-xfer {
+ rockchip,pins =
+ /* uart8_rxm0 */
+ <2 RK_PC6 2 &pcfg_pull_up>,
+ /* uart8_txm0 */
+ <2 RK_PC5 3 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart8m0_ctsn: uart8m0-ctsn {
+ rockchip,pins =
+ /* uart8m0_ctsn */
+ <2 RK_PB2 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart8m0_rtsn: uart8m0-rtsn {
+ rockchip,pins =
+ /* uart8m0_rtsn */
+ <2 RK_PB1 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart8m1_xfer: uart8m1-xfer {
+ rockchip,pins =
+ /* uart8_rxm1 */
+ <3 RK_PA0 4 &pcfg_pull_up>,
+ /* uart8_txm1 */
+ <2 RK_PD7 4 &pcfg_pull_up>;
+ };
+ };
+
+ uart9 {
+ /omit-if-no-ref/
+ uart9m0_xfer: uart9m0-xfer {
+ rockchip,pins =
+ /* uart9_rxm0 */
+ <2 RK_PA7 3 &pcfg_pull_up>,
+ /* uart9_txm0 */
+ <2 RK_PB0 3 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart9m0_ctsn: uart9m0-ctsn {
+ rockchip,pins =
+ /* uart9m0_ctsn */
+ <2 RK_PC4 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart9m0_rtsn: uart9m0-rtsn {
+ rockchip,pins =
+ /* uart9m0_rtsn */
+ <2 RK_PC3 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ uart9m1_xfer: uart9m1-xfer {
+ rockchip,pins =
+ /* uart9_rxm1 */
+ <4 RK_PC6 4 &pcfg_pull_up>,
+ /* uart9_txm1 */
+ <4 RK_PC5 4 &pcfg_pull_up>;
+ };
+
+ /omit-if-no-ref/
+ uart9m2_xfer: uart9m2-xfer {
+ rockchip,pins =
+ /* uart9_rxm2 */
+ <4 RK_PA5 4 &pcfg_pull_up>,
+ /* uart9_txm2 */
+ <4 RK_PA4 4 &pcfg_pull_up>;
+ };
+ };
+
+ vop {
+ /omit-if-no-ref/
+ vopm0_pins: vopm0-pins {
+ rockchip,pins =
+ /* vop_pwmm0 */
+ <0 RK_PC3 2 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ vopm1_pins: vopm1-pins {
+ rockchip,pins =
+ /* vop_pwmm1 */
+ <3 RK_PC4 2 &pcfg_pull_none>;
+ };
+ };
+};
+
+/*
+ * This part is edited handly.
+ */
+&pinctrl {
+ spi0-hs {
+ /omit-if-no-ref/
+ spi0m0_pins_hs: spi0m0-pins {
+ rockchip,pins =
+ /* spi0_clkm0 */
+ <0 RK_PB5 2 &pcfg_pull_up_drv_level_1>,
+ /* spi0_misom0 */
+ <0 RK_PC5 2 &pcfg_pull_up_drv_level_1>,
+ /* spi0_mosim0 */
+ <0 RK_PB6 2 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi0m0_cs0_hs: spi0m0-cs0 {
+ rockchip,pins =
+ /* spi0_cs0m0 */
+ <0 RK_PC6 2 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi0m0_cs1_hs: spi0m0-cs1 {
+ rockchip,pins =
+ /* spi0_cs1m0 */
+ <0 RK_PC4 2 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi0m1_pins_hs: spi0m1-pins {
+ rockchip,pins =
+ /* spi0_clkm1 */
+ <2 RK_PD3 3 &pcfg_pull_up_drv_level_1>,
+ /* spi0_misom1 */
+ <2 RK_PD0 3 &pcfg_pull_up_drv_level_1>,
+ /* spi0_mosim1 */
+ <2 RK_PD1 3 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi0m1_cs0_hs: spi0m1-cs0 {
+ rockchip,pins =
+ /* spi0_cs0m1 */
+ <2 RK_PD2 3 &pcfg_pull_up_drv_level_1>;
+ };
+ };
+
+ spi1-hs {
+ /omit-if-no-ref/
+ spi1m0_pins_hs: spi1m0-pins {
+ rockchip,pins =
+ /* spi1_clkm0 */
+ <2 RK_PB5 3 &pcfg_pull_up_drv_level_1>,
+ /* spi1_misom0 */
+ <2 RK_PB6 3 &pcfg_pull_up_drv_level_1>,
+ /* spi1_mosim0 */
+ <2 RK_PB7 4 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi1m0_cs0_hs: spi1m0-cs0 {
+ rockchip,pins =
+ /* spi1_cs0m0 */
+ <2 RK_PC0 4 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi1m0_cs1_hs: spi1m0-cs1 {
+ rockchip,pins =
+ /* spi1_cs1m0 */
+ <2 RK_PC6 3 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi1m1_pins_hs: spi1m1-pins {
+ rockchip,pins =
+ /* spi1_clkm1 */
+ <3 RK_PC3 3 &pcfg_pull_up_drv_level_1>,
+ /* spi1_misom1 */
+ <3 RK_PC2 3 &pcfg_pull_up_drv_level_1>,
+ /* spi1_mosim1 */
+ <3 RK_PC1 3 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi1m1_cs0_hs: spi1m1-cs0 {
+ rockchip,pins =
+ /* spi1_cs0m1 */
+ <3 RK_PA1 3 &pcfg_pull_up_drv_level_1>;
+ };
+ };
+
+ spi2-hs {
+ /omit-if-no-ref/
+ spi2m0_pins_hs: spi2m0-pins {
+ rockchip,pins =
+ /* spi2_clkm0 */
+ <2 RK_PC1 4 &pcfg_pull_up_drv_level_1>,
+ /* spi2_misom0 */
+ <2 RK_PC2 4 &pcfg_pull_up_drv_level_1>,
+ /* spi2_mosim0 */
+ <2 RK_PC3 4 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi2m0_cs0_hs: spi2m0-cs0 {
+ rockchip,pins =
+ /* spi2_cs0m0 */
+ <2 RK_PC4 4 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi2m0_cs1_hs: spi2m0-cs1 {
+ rockchip,pins =
+ /* spi2_cs1m0 */
+ <2 RK_PC5 4 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi2m1_pins_hs: spi2m1-pins {
+ rockchip,pins =
+ /* spi2_clkm1 */
+ <3 RK_PA0 3 &pcfg_pull_up_drv_level_1>,
+ /* spi2_misom1 */
+ <2 RK_PD7 3 &pcfg_pull_up_drv_level_1>,
+ /* spi2_mosim1 */
+ <2 RK_PD6 3 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi2m1_cs0_hs: spi2m1-cs0 {
+ rockchip,pins =
+ /* spi2_cs0m1 */
+ <2 RK_PD5 3 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi2m1_cs1_hs: spi2m1-cs1 {
+ rockchip,pins =
+ /* spi2_cs1m1 */
+ <2 RK_PD4 3 &pcfg_pull_up_drv_level_1>;
+ };
+ };
+
+ spi3-hs {
+ /omit-if-no-ref/
+ spi3m0_pins_hs: spi3m0-pins {
+ rockchip,pins =
+ /* spi3_clkm0 */
+ <4 RK_PB3 4 &pcfg_pull_up_drv_level_1>,
+ /* spi3_misom0 */
+ <4 RK_PB0 4 &pcfg_pull_up_drv_level_1>,
+ /* spi3_mosim0 */
+ <4 RK_PB2 4 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi3m0_cs0_hs: spi3m0-cs0 {
+ rockchip,pins =
+ /* spi3_cs0m0 */
+ <4 RK_PA6 4 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi3m0_cs1_hs: spi3m0-cs1 {
+ rockchip,pins =
+ /* spi3_cs1m0 */
+ <4 RK_PA7 4 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi3m1_pins_hs: spi3m1-pins {
+ rockchip,pins =
+ /* spi3_clkm1 */
+ <4 RK_PC2 2 &pcfg_pull_up_drv_level_1>,
+ /* spi3_misom1 */
+ <4 RK_PC5 2 &pcfg_pull_up_drv_level_1>,
+ /* spi3_mosim1 */
+ <4 RK_PC3 2 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi3m1_cs0_hs: spi3m1-cs0 {
+ rockchip,pins =
+ /* spi3_cs0m1 */
+ <4 RK_PC6 2 &pcfg_pull_up_drv_level_1>;
+ };
+
+ /omit-if-no-ref/
+ spi3m1_cs1_hs: spi3m1-cs1 {
+ rockchip,pins =
+ /* spi3_cs1m1 */
+ <4 RK_PD1 2 &pcfg_pull_up_drv_level_1>;
+ };
+ };
+
+ gmac-txd-level3 {
+ /omit-if-no-ref/
+ gmac0_tx_bus2_level3: gmac0-tx-bus2-level3 {
+ rockchip,pins =
+ /* gmac0_txd0 */
+ <2 RK_PB3 1 &pcfg_pull_none_drv_level_3>,
+ /* gmac0_txd1 */
+ <2 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+ /* gmac0_txen */
+ <2 RK_PB5 1 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac0_rgmii_bus_level3: gmac0-rgmii-bus-level3 {
+ rockchip,pins =
+ /* gmac0_rxd2 */
+ <2 RK_PA3 2 &pcfg_pull_none>,
+ /* gmac0_rxd3 */
+ <2 RK_PA4 2 &pcfg_pull_none>,
+ /* gmac0_txd2 */
+ <2 RK_PA6 2 &pcfg_pull_none_drv_level_3>,
+ /* gmac0_txd3 */
+ <2 RK_PA7 2 &pcfg_pull_none_drv_level_3>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m0_tx_bus2_level3: gmac1m0-tx-bus2-level3 {
+ rockchip,pins =
+ /* gmac1_txd0m0 */
+ <3 RK_PB5 3 &pcfg_pull_none_drv_level_3>,
+ /* gmac1_txd1m0 */
+ <3 RK_PB6 3 &pcfg_pull_none_drv_level_3>,
+ /* gmac1_txenm0 */
+ <3 RK_PB7 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m0_rgmii_bus_level3: gmac1m0-rgmii-bus-level3 {
+ rockchip,pins =
+ /* gmac1_rxd2m0 */
+ <3 RK_PA4 3 &pcfg_pull_none>,
+ /* gmac1_rxd3m0 */
+ <3 RK_PA5 3 &pcfg_pull_none>,
+ /* gmac1_txd2m0 */
+ <3 RK_PA2 3 &pcfg_pull_none_drv_level_3>,
+ /* gmac1_txd3m0 */
+ <3 RK_PA3 3 &pcfg_pull_none_drv_level_3>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_tx_bus2_level3: gmac1m1-tx-bus2-level3 {
+ rockchip,pins =
+ /* gmac1_txd0m1 */
+ <4 RK_PA4 3 &pcfg_pull_none_drv_level_3>,
+ /* gmac1_txd1m1 */
+ <4 RK_PA5 3 &pcfg_pull_none_drv_level_3>,
+ /* gmac1_txenm1 */
+ <4 RK_PA6 3 &pcfg_pull_none>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_rgmii_bus_level3: gmac1m1-rgmii-bus-level3 {
+ rockchip,pins =
+ /* gmac1_rxd2m1 */
+ <4 RK_PA1 3 &pcfg_pull_none>,
+ /* gmac1_rxd3m1 */
+ <4 RK_PA2 3 &pcfg_pull_none>,
+ /* gmac1_txd2m1 */
+ <3 RK_PD6 3 &pcfg_pull_none_drv_level_3>,
+ /* gmac1_txd3m1 */
+ <3 RK_PD7 3 &pcfg_pull_none_drv_level_3>;
+ };
+ };
+
+ gmac-txc-level2 {
+ /omit-if-no-ref/
+ gmac0_rgmii_clk_level2: gmac0-rgmii-clk-level2 {
+ rockchip,pins =
+ /* gmac0_rxclk */
+ <2 RK_PA5 2 &pcfg_pull_none>,
+ /* gmac0_txclk */
+ <2 RK_PB0 2 &pcfg_pull_none_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m0_rgmii_clk_level2: gmac1m0-rgmii-clk-level2 {
+ rockchip,pins =
+ /* gmac1_rxclkm0 */
+ <3 RK_PA7 3 &pcfg_pull_none>,
+ /* gmac1_txclkm0 */
+ <3 RK_PA6 3 &pcfg_pull_none_drv_level_2>;
+ };
+
+ /omit-if-no-ref/
+ gmac1m1_rgmii_clk_level2: gmac1m1-rgmii-clk-level2 {
+ rockchip,pins =
+ /* gmac1_rxclkm1 */
+ <4 RK_PA3 3 &pcfg_pull_none>,
+ /* gmac1_txclkm1 */
+ <4 RK_PA0 3 &pcfg_pull_none_drv_level_2>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
new file mode 100644
index 0000000..d225e6a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rk3568-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "rockchip,rk3568";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial7 = &uart7;
+ serial8 = &uart8;
+ serial9 = &uart9;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x0>;
+ clocks = <&scmi_clk 0>;
+ enable-method = "psci";
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
+ cpu0_opp_table: cpu0-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ clock-latency-ns = <40000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ opp-suspend;
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ };
+
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <900000 900000 1150000>;
+ };
+
+ opp-1608000000 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <975000 975000 1150000>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1050000 1050000 1150000>;
+ };
+
+ opp-1992000000 {
+ opp-hz = /bits/ 64 <1992000000>;
+ opp-microvolt = <1150000 1150000 1150000>;
+ };
+ };
+
+ firmware {
+ scmi: scmi {
+ compatible = "arm,scmi-smc";
+ arm,smc-id = <0x82000010>;
+ shmem = <&scmi_shmem>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ arm,no-tick-in-suspend;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ pinctrl-0 = <&clk32k_out0>;
+ pinctrl-names = "default";
+ #clock-cells = <0>;
+ };
+
+ sram@10f000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x0010f000 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x0010f000 0x100>;
+
+ scmi_shmem: sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x100>;
+ };
+ };
+
+ gic: interrupt-controller@fd400000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
+ <0x0 0xfd460000 0 0x80000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ mbi-alias = <0x0 0xfd100000>;
+ mbi-ranges = <296 24>;
+ msi-controller;
+ };
+
+ pmugrf: syscon@fdc20000 {
+ compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
+ reg = <0x0 0xfdc20000 0x0 0x10000>;
+ };
+
+ grf: syscon@fdc60000 {
+ compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xfdc60000 0x0 0x10000>;
+ };
+
+ pmucru: clock-controller@fdd00000 {
+ compatible = "rockchip,rk3568-pmucru";
+ reg = <0x0 0xfdd00000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ cru: clock-controller@fdd20000 {
+ compatible = "rockchip,rk3568-cru";
+ reg = <0x0 0xfdd20000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ i2c0: i2c@fdd40000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfdd40000 0x0 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart0: serial@fdd50000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfdd50000 0x0 0x100>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 0>, <&dmac0 1>;
+ pinctrl-0 = <&uart0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ sdmmc2: mmc@fe000000 {
+ compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe000000 0x0 0x4000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>,
+ <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_SDMMC2>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ sdmmc0: mmc@fe2b0000 {
+ compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe2b0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>,
+ <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_SDMMC0>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@fe2c0000 {
+ compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe2c0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>,
+ <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ resets = <&cru SRST_SDMMC1>;
+ reset-names = "reset";
+ status = "disabled";
+ };
+
+ sdhci: mmc@fe310000 {
+ compatible = "rockchip,rk3568-dwcmshc";
+ reg = <0x0 0xfe310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>;
+ assigned-clock-rates = <200000000>, <24000000>;
+ clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+ <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+ <&cru TCLK_EMMC>;
+ clock-names = "core", "bus", "axi", "block", "timer";
+ status = "disabled";
+ };
+
+ dmac0: dmac@fe530000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xfe530000 0x0 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_BUS>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
+ dmac1: dmac@fe550000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xfe550000 0x0 0x4000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_BUS>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
+ i2c1: i2c@fe5a0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c1_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@fe5b0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5b0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c2m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@fe5c0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5c0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c3m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@fe5d0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5d0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c4m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@fe5e0000 {
+ compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfe5e0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c5m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart1: serial@fe650000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe650000 0x0 0x100>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 2>, <&dmac0 3>;
+ pinctrl-0 = <&uart1m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@fe660000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe660000 0x0 0x100>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 4>, <&dmac0 5>;
+ pinctrl-0 = <&uart2m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart3: serial@fe670000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe670000 0x0 0x100>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 6>, <&dmac0 7>;
+ pinctrl-0 = <&uart3m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial@fe680000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe680000 0x0 0x100>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 8>, <&dmac0 9>;
+ pinctrl-0 = <&uart4m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart5: serial@fe690000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe690000 0x0 0x100>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 10>, <&dmac0 11>;
+ pinctrl-0 = <&uart5m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart6: serial@fe6a0000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe6a0000 0x0 0x100>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 12>, <&dmac0 13>;
+ pinctrl-0 = <&uart6m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart7: serial@fe6b0000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe6b0000 0x0 0x100>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 14>, <&dmac0 15>;
+ pinctrl-0 = <&uart7m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart8: serial@fe6c0000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe6c0000 0x0 0x100>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 16>, <&dmac0 17>;
+ pinctrl-0 = <&uart8m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart9: serial@fe6d0000 {
+ compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfe6d0000 0x0 0x100>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 18>, <&dmac0 19>;
+ pinctrl-0 = <&uart9m0_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3568-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio0: gpio@fdd60000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfdd60000 0x0 0x100>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru PCLK_GPIO0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@fe740000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfe740000 0x0 0x100>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@fe750000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfe750000 0x0 0x100>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@fe760000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfe760000 0x0 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@fe770000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfe770000 0x0 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
+
+#include "rk3568-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
new file mode 100644
index 0000000..5c64543
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+&pinctrl {
+ /omit-if-no-ref/
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_0: pcfg-pull-none-drv-level-0 {
+ bias-disable;
+ drive-strength = <0>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_1: pcfg-pull-none-drv-level-1 {
+ bias-disable;
+ drive-strength = <1>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_2: pcfg-pull-none-drv-level-2 {
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_3: pcfg-pull-none-drv-level-3 {
+ bias-disable;
+ drive-strength = <3>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_4: pcfg-pull-none-drv-level-4 {
+ bias-disable;
+ drive-strength = <4>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_5: pcfg-pull-none-drv-level-5 {
+ bias-disable;
+ drive-strength = <5>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_6: pcfg-pull-none-drv-level-6 {
+ bias-disable;
+ drive-strength = <6>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_7: pcfg-pull-none-drv-level-7 {
+ bias-disable;
+ drive-strength = <7>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_8: pcfg-pull-none-drv-level-8 {
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_9: pcfg-pull-none-drv-level-9 {
+ bias-disable;
+ drive-strength = <9>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_10: pcfg-pull-none-drv-level-10 {
+ bias-disable;
+ drive-strength = <10>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_11: pcfg-pull-none-drv-level-11 {
+ bias-disable;
+ drive-strength = <11>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_12: pcfg-pull-none-drv-level-12 {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_13: pcfg-pull-none-drv-level-13 {
+ bias-disable;
+ drive-strength = <13>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_14: pcfg-pull-none-drv-level-14 {
+ bias-disable;
+ drive-strength = <14>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_15: pcfg-pull-none-drv-level-15 {
+ bias-disable;
+ drive-strength = <15>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_0: pcfg-pull-up-drv-level-0 {
+ bias-pull-up;
+ drive-strength = <0>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_1: pcfg-pull-up-drv-level-1 {
+ bias-pull-up;
+ drive-strength = <1>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_2: pcfg-pull-up-drv-level-2 {
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_3: pcfg-pull-up-drv-level-3 {
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_4: pcfg-pull-up-drv-level-4 {
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_5: pcfg-pull-up-drv-level-5 {
+ bias-pull-up;
+ drive-strength = <5>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_6: pcfg-pull-up-drv-level-6 {
+ bias-pull-up;
+ drive-strength = <6>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_7: pcfg-pull-up-drv-level-7 {
+ bias-pull-up;
+ drive-strength = <7>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_8: pcfg-pull-up-drv-level-8 {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_9: pcfg-pull-up-drv-level-9 {
+ bias-pull-up;
+ drive-strength = <9>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_10: pcfg-pull-up-drv-level-10 {
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_11: pcfg-pull-up-drv-level-11 {
+ bias-pull-up;
+ drive-strength = <11>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_12: pcfg-pull-up-drv-level-12 {
+ bias-pull-up;
+ drive-strength = <12>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_13: pcfg-pull-up-drv-level-13 {
+ bias-pull-up;
+ drive-strength = <13>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_14: pcfg-pull-up-drv-level-14 {
+ bias-pull-up;
+ drive-strength = <14>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_drv_level_15: pcfg-pull-up-drv-level-15 {
+ bias-pull-up;
+ drive-strength = <15>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_0: pcfg-pull-down-drv-level-0 {
+ bias-pull-down;
+ drive-strength = <0>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_1: pcfg-pull-down-drv-level-1 {
+ bias-pull-down;
+ drive-strength = <1>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_2: pcfg-pull-down-drv-level-2 {
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_3: pcfg-pull-down-drv-level-3 {
+ bias-pull-down;
+ drive-strength = <3>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_4: pcfg-pull-down-drv-level-4 {
+ bias-pull-down;
+ drive-strength = <4>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_5: pcfg-pull-down-drv-level-5 {
+ bias-pull-down;
+ drive-strength = <5>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_6: pcfg-pull-down-drv-level-6 {
+ bias-pull-down;
+ drive-strength = <6>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_7: pcfg-pull-down-drv-level-7 {
+ bias-pull-down;
+ drive-strength = <7>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_8: pcfg-pull-down-drv-level-8 {
+ bias-pull-down;
+ drive-strength = <8>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_9: pcfg-pull-down-drv-level-9 {
+ bias-pull-down;
+ drive-strength = <9>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_10: pcfg-pull-down-drv-level-10 {
+ bias-pull-down;
+ drive-strength = <10>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_11: pcfg-pull-down-drv-level-11 {
+ bias-pull-down;
+ drive-strength = <11>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_12: pcfg-pull-down-drv-level-12 {
+ bias-pull-down;
+ drive-strength = <12>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_13: pcfg-pull-down-drv-level-13 {
+ bias-pull-down;
+ drive-strength = <13>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_14: pcfg-pull-down-drv-level-14 {
+ bias-pull-down;
+ drive-strength = <14>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_drv_level_15: pcfg-pull-down-drv-level-15 {
+ bias-pull-down;
+ drive-strength = <15>;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_up_smt: pcfg-pull-up-smt {
+ bias-pull-up;
+ input-schmitt-enable;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_down_smt: pcfg-pull-down-smt {
+ bias-pull-down;
+ input-schmitt-enable;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_smt: pcfg-pull-none-smt {
+ bias-disable;
+ input-schmitt-enable;
+ };
+
+ /omit-if-no-ref/
+ pcfg_pull_none_drv_level_0_smt: pcfg-pull-none-drv-level-0-smt {
+ bias-disable;
+ drive-strength = <0>;
+ input-schmitt-enable;
+ };
+
+ /omit-if-no-ref/
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ /omit-if-no-ref/
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index ca59d1f..02c3fdf 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -5,6 +5,17 @@
* Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
*/
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+ serdes_refclk: clock-cmnrefclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+};
+
&cbass_main {
oc_sram: sram@70000000 {
compatible = "mmio-sram";
@@ -13,8 +24,30 @@
#size-cells = <1>;
ranges = <0x0 0x00 0x70000000 0x200000>;
- atf-sram@0 {
- reg = <0x0 0x1a000>;
+ tfa-sram@1c0000 {
+ reg = <0x1c0000 0x20000>;
+ };
+
+ dmsc-sram@1e0000 {
+ reg = <0x1e0000 0x1c000>;
+ };
+
+ sproxy-sram@1fc000 {
+ reg = <0x1fc000 0x4000>;
+ };
+ };
+
+ main_conf: syscon@43000000 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x0 0x43000000 0x0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x43000000 0x20000>;
+
+ serdes_ln_ctrl: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */
};
};
@@ -189,8 +222,6 @@
main_uart0: serial@2800000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -202,8 +233,6 @@
main_uart1: serial@2810000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -215,8 +244,6 @@
main_uart2: serial@2820000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -228,8 +255,6 @@
main_uart3: serial@2830000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02830000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -241,8 +266,6 @@
main_uart4: serial@2840000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02840000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -254,8 +277,6 @@
main_uart5: serial@2850000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02850000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -267,8 +288,6 @@
main_uart6: serial@2860000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x02860000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -489,7 +508,8 @@
ti,mac-only;
label = "port1";
phys = <&phy_gmii_sel 1>;
- mac-address = [00 00 de ad be ef];
+ mac-address = [00 00 00 00 00 00];
+ ti,syscon-efuse = <&main_conf 0x200>;
};
cpsw_port2: port@2 {
@@ -497,7 +517,7 @@
ti,mac-only;
label = "port2";
phys = <&phy_gmii_sel 2>;
- mac-address = [00 01 de ad be ef];
+ mac-address = [00 00 00 00 00 00];
};
};
@@ -673,4 +693,170 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
};
+
+ main_r5fss0: r5fss@78000000 {
+ compatible = "ti,am64-r5fss";
+ ti,cluster-mode = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x78000000 0x00 0x78000000 0x10000>,
+ <0x78100000 0x00 0x78100000 0x10000>,
+ <0x78200000 0x00 0x78200000 0x08000>,
+ <0x78300000 0x00 0x78300000 0x08000>;
+ power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+
+ main_r5fss0_core0: r5f@78000000 {
+ compatible = "ti,am64-r5f";
+ reg = <0x78000000 0x00010000>,
+ <0x78100000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <121>;
+ ti,sci-proc-ids = <0x01 0xff>;
+ resets = <&k3_reset 121 1>;
+ firmware-name = "am64-main-r5f0_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+
+ main_r5fss0_core1: r5f@78200000 {
+ compatible = "ti,am64-r5f";
+ reg = <0x78200000 0x00008000>,
+ <0x78300000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <122>;
+ ti,sci-proc-ids = <0x02 0xff>;
+ resets = <&k3_reset 122 1>;
+ firmware-name = "am64-main-r5f0_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
+
+ main_r5fss1: r5fss@78400000 {
+ compatible = "ti,am64-r5fss";
+ ti,cluster-mode = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x78400000 0x00 0x78400000 0x10000>,
+ <0x78500000 0x00 0x78500000 0x10000>,
+ <0x78600000 0x00 0x78600000 0x08000>,
+ <0x78700000 0x00 0x78700000 0x08000>;
+ power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+
+ main_r5fss1_core0: r5f@78400000 {
+ compatible = "ti,am64-r5f";
+ reg = <0x78400000 0x00010000>,
+ <0x78500000 0x00010000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <123>;
+ ti,sci-proc-ids = <0x06 0xff>;
+ resets = <&k3_reset 123 1>;
+ firmware-name = "am64-main-r5f1_0-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+
+ main_r5fss1_core1: r5f@78600000 {
+ compatible = "ti,am64-r5f";
+ reg = <0x78600000 0x00008000>,
+ <0x78700000 0x00008000>;
+ reg-names = "atcm", "btcm";
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <124>;
+ ti,sci-proc-ids = <0x07 0xff>;
+ resets = <&k3_reset 124 1>;
+ firmware-name = "am64-main-r5f1_1-fw";
+ ti,atcm-enable = <1>;
+ ti,btcm-enable = <1>;
+ ti,loczrama = <1>;
+ };
+ };
+
+ serdes_wiz0: wiz@f000000 {
+ compatible = "ti,am64-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&serdes_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ num-lanes = <1>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
+
+ assigned-clocks = <&k3_clks 162 1>;
+ assigned-clock-parents = <&k3_clks 162 5>;
+
+ serdes0: serdes@f000000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x0f000000 0x00010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz0 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 162 1>,
+ <&k3_clks 162 1>,
+ <&k3_clks 162 1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ };
+ };
+
+ pcie0_rc: pcie@f102000 {
+ compatible = "ti,am64-pcie-host", "ti,j721e-pcie-host";
+ reg = <0x00 0x0f102000 0x00 0x1000>,
+ <0x00 0x0f100000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x68000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+ max-link-speed = <2>;
+ num-lanes = <1>;
+ power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 114 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>;
+ clock-names = "fck", "pcie_refclk";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ cdns,no-bar-match-nbits = <64>;
+ vendor-id = <0x104c>;
+ device-id = <0xb010>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ ranges = <0x01000000 0x00 0x68001000 0x00 0x68001000 0x00 0x0010000>,
+ <0x02000000 0x00 0x68011000 0x00 0x68011000 0x00 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>;
+ };
+
+ pcie0_ep: pcie-ep@f102000 {
+ compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep";
+ reg = <0x00 0x0f102000 0x00 0x1000>,
+ <0x00 0x0f100000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x68000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+ ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+ max-link-speed = <2>;
+ num-lanes = <1>;
+ power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 114 0>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <1>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index deb19ae5..59cc58f 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -9,8 +9,6 @@
mcu_uart0: serial@4a00000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x04a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -22,8 +20,6 @@
mcu_uart1: serial@4a10000 {
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x04a10000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -87,7 +83,7 @@
};
mcu_gpio0: gpio@4201000 {
- compatible = "ti,am64-gpio", "keystone-gpio";
+ compatible = "ti,am64-gpio", "ti,keystone-gpio";
reg = <0x0 0x4201000 0x0 0x100>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index dad0efa..0307122 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -5,6 +5,8 @@
/dts-v1/;
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/ti-serdes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
@@ -36,6 +38,60 @@
alignment = <0x1000>;
no-map;
};
+
+ main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: ipc-memories@a5000000 {
+ reg = <0x00 0xa5000000 0x00 0x00800000>;
+ alignment = <0x1000>;
+ no-map;
+ };
};
evm_12v0: fixedregulator-evm12v0 {
@@ -334,7 +390,7 @@
&main_spi0 {
pinctrl-names = "default";
pinctrl-0 = <&main_spi0_pins_default>;
- ti,pindir-d0-out-d1-in = <1>;
+ ti,pindir-d0-out-d1-in;
eeprom@0 {
compatible = "microchip,93lc46b";
reg = <0>;
@@ -466,3 +522,55 @@
&mailbox0_cluster7 {
status = "disabled";
};
+
+&main_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+ mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+ memory-region = <&main_r5fss1_core0_dma_memory_region>,
+ <&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+ mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+ memory-region = <&main_r5fss1_core1_dma_memory_region>,
+ <&main_r5fss1_core1_memory_region>;
+};
+
+&serdes_ln_ctrl {
+ idle-states = <AM64_SERDES0_LANE0_PCIE0>;
+};
+
+&serdes0 {
+ serdes0_pcie_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz0 1>;
+ };
+};
+
+&pcie0_rc {
+ reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <1>;
+};
+
+&pcie0_ep {
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <1>;
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 8424cd0..d3aa290 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -5,6 +5,8 @@
/dts-v1/;
+#include <dt-bindings/mux/ti-serdes.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
#include "k3-am642.dtsi"
@@ -35,6 +37,60 @@
alignment = <0x1000>;
no-map;
};
+
+ main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa0100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa1100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa2100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3000000 0x00 0x100000>;
+ no-map;
+ };
+
+ main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0xa3100000 0x00 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: ipc-memories@a5000000 {
+ reg = <0x00 0xa5000000 0x00 0x00800000>;
+ alignment = <0x1000>;
+ no-map;
+ };
};
vusb_main: fixed-regulator-vusb-main5v0 {
@@ -85,6 +141,12 @@
>;
};
+ main_usb0_pins_default: main-usb0-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
+ >;
+ };
+
main_i2c1_pins_default: main-i2c1-pins-default {
pinctrl-single,pins = <
AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
@@ -235,6 +297,33 @@
disable-wp;
};
+&serdes_ln_ctrl {
+ idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&serdes0 {
+ serdes0_usb_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_USB3>;
+ resets = <&serdes_wiz0 1>;
+ };
+};
+
+&usbss0 {
+ ti,vbus-divider;
+};
+
+&usb0 {
+ dr_mode = "host";
+ maximum-speed = "super-speed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_usb0_pins_default>;
+ phys = <&serdes0_usb_link>;
+ phy-names = "cdns3,usb3-phy";
+};
+
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&mdio1_pins_default
@@ -332,3 +421,35 @@
&mailbox0_cluster7 {
status = "disabled";
};
+
+&main_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+ memory-region = <&main_r5fss0_core0_dma_memory_region>,
+ <&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+ mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+ memory-region = <&main_r5fss0_core1_dma_memory_region>,
+ <&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+ mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+ memory-region = <&main_r5fss1_core0_dma_memory_region>,
+ <&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+ mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+ memory-region = <&main_r5fss1_core1_dma_memory_region>,
+ <&main_r5fss1_core1_memory_region>;
+};
+
+&pcie0_rc {
+ status = "disabled";
+};
+
+&pcie0_ep {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index de763ca..1008e91 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -555,6 +555,7 @@
pinctrl-0 = <&main_mmc1_pins_default>;
ti,driver-strength-ohm = <50>;
disable-wp;
+ no-1-8-v;
};
&usb0 {
@@ -575,7 +576,7 @@
#address-cells = <1>;
#size-cells= <0>;
- ti,pindir-d0-out-d1-in = <1>;
+ ti,pindir-d0-out-d1-in;
};
&tscadc0 {
@@ -653,3 +654,63 @@
&pcie1_ep {
status = "disabled";
};
+
+&mailbox0_cluster0 {
+ status = "disabled";
+};
+
+&mailbox0_cluster1 {
+ status = "disabled";
+};
+
+&mailbox0_cluster2 {
+ status = "disabled";
+};
+
+&mailbox0_cluster3 {
+ status = "disabled";
+};
+
+&mailbox0_cluster4 {
+ status = "disabled";
+};
+
+&mailbox0_cluster5 {
+ status = "disabled";
+};
+
+&mailbox0_cluster6 {
+ status = "disabled";
+};
+
+&mailbox0_cluster7 {
+ status = "disabled";
+};
+
+&mailbox0_cluster8 {
+ status = "disabled";
+};
+
+&mailbox0_cluster9 {
+ status = "disabled";
+};
+
+&mailbox0_cluster10 {
+ status = "disabled";
+};
+
+&mailbox0_cluster11 {
+ status = "disabled";
+};
+
+&icssg0_mdio {
+ status = "disabled";
+};
+
+&icssg1_mdio {
+ status = "disabled";
+};
+
+&icssg2_mdio {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 6cd3131..ba4e5d3 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -84,8 +84,6 @@
main_uart0: serial@2800000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -95,8 +93,6 @@
main_uart1: serial@2810000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
@@ -105,8 +101,6 @@
main_uart2: serial@2820000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
@@ -301,7 +295,6 @@
ti,otap-del-sel = <0x2>;
ti,trm-icp = <0x8>;
dma-coherent;
- no-1-8-v;
};
scm_conf: scm-conf@100000 {
@@ -1053,6 +1046,16 @@
reg-names = "iram", "control", "debug";
firmware-name = "am65x-txpru0_1-fw";
};
+
+ icssg0_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x100>;
+ clocks = <&k3_clks 62 3>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ };
};
icssg1: icssg@b100000 {
@@ -1184,6 +1187,16 @@
reg-names = "iram", "control", "debug";
firmware-name = "am65x-txpru1_1-fw";
};
+
+ icssg1_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x100>;
+ clocks = <&k3_clks 63 3>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ };
};
icssg2: icssg@b200000 {
@@ -1315,5 +1328,15 @@
reg-names = "iram", "control", "debug";
firmware-name = "am65x-txpru2_1-fw";
};
+
+ icssg2_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x100>;
+ clocks = <&k3_clks 64 3>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index f5b8ef2..c93ff15 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -23,8 +23,6 @@
mcu_uart0: serial@40a00000 {
compatible = "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 7cb864b..9d21cdf 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -50,8 +50,6 @@
wkup_uart0: serial@42300000 {
compatible = "ti,am654-uart";
reg = <0x42300000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
index 4f7e3f2..94bb5dd 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
@@ -59,3 +59,8 @@
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
};
+
+&mcu_r5fss0 {
+ /* lock-step mode not supported on this board */
+ ti,cluster-mode = <0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index eddb2ff..cfbcebf 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -85,6 +85,38 @@
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
};
};
+
+ evm_12v0: fixedregulator-evm12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc3v3_io: fixedregulator-vcc3v3io {
+ /* Output of TPS54334 */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&evm_12v0>;
+ };
+
+ vdd_mmc1_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_mmc1_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ vin-supply = <&vcc3v3_io>;
+ gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+ };
};
&wkup_pmx0 {
@@ -136,7 +168,7 @@
AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
- AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
+ AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */
AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
>;
};
@@ -299,7 +331,7 @@
pinctrl-0 = <&main_spi0_pins_default>;
#address-cells = <1>;
#size-cells= <0>;
- ti,pindir-d0-out-d1-in = <1>;
+ ti,pindir-d0-out-d1-in;
flash@0{
compatible = "jedec,spi-nor";
@@ -327,6 +359,7 @@
* disable sdhci1
*/
&sdhci1 {
+ vmmc-supply = <&vdd_mmc1_sd>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
ti,driver-strength-ohm = <50>;
@@ -506,3 +539,15 @@
&dss {
status = "disabled";
};
+
+&icssg0_mdio {
+ status = "disabled";
+};
+
+&icssg1_mdio {
+ status = "disabled";
+};
+
+&icssg2_mdio {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index bedd01b..d14f3c1 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -90,7 +90,7 @@
J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
- J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+ J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 19fea8a..e8a41d0 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -301,8 +301,6 @@
main_uart0: serial@2800000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -314,8 +312,6 @@
main_uart1: serial@2810000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -327,8 +323,6 @@
main_uart2: serial@2820000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -340,8 +334,6 @@
main_uart3: serial@2830000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02830000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -353,8 +345,6 @@
main_uart4: serial@2840000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02840000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -366,8 +356,6 @@
main_uart5: serial@2850000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02850000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -379,8 +367,6 @@
main_uart6: serial@2860000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02860000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -392,8 +378,6 @@
main_uart7: serial@2870000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02870000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -405,8 +389,6 @@
main_uart8: serial@2880000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02880000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -418,8 +400,6 @@
main_uart9: serial@2890000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02890000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -683,6 +663,7 @@
"otg";
maximum-speed = "super-speed";
dr_mode = "otg";
+ cdns,phyrst-a-enable;
};
};
@@ -696,7 +677,6 @@
<149>;
interrupt-controller;
#interrupt-cells = <2>;
- #address-cells = <0>;
ti,ngpio = <69>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
@@ -714,7 +694,6 @@
<158>;
interrupt-controller;
#interrupt-cells = <2>;
- #address-cells = <0>;
ti,ngpio = <69>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
@@ -732,7 +711,6 @@
<167>;
interrupt-controller;
#interrupt-cells = <2>;
- #address-cells = <0>;
ti,ngpio = <69>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
@@ -750,7 +728,6 @@
<176>;
interrupt-controller;
#interrupt-cells = <2>;
- #address-cells = <0>;
ti,ngpio = <69>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 5663fe3..1044ec6 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -73,8 +73,6 @@
wkup_uart0: serial@42300000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -86,8 +84,6 @@
mcu_uart0: serial@40a00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
@@ -117,7 +113,6 @@
interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
interrupt-controller;
#interrupt-cells = <2>;
- #address-cells = <0>;
ti,ngpio = <85>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
@@ -134,7 +129,6 @@
interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
interrupt-controller;
#interrupt-cells = <2>;
- #address-cells = <0>;
ti,ngpio = <85>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 60764366..8bd02d9 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
/ {
chosen {
@@ -237,7 +238,7 @@
J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
- J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+ J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
>;
};
@@ -358,7 +359,7 @@
};
&serdes3 {
- serdes3_usb_link: link@0 {
+ serdes3_usb_link: phy@0 {
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
@@ -635,8 +636,45 @@
status = "disabled";
};
+&cmn_refclk1 {
+ clock-frequency = <100000000>;
+};
+
+&wiz0_pll1_refclk {
+ assigned-clocks = <&wiz0_pll1_refclk>;
+ assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz0_refclk_dig {
+ assigned-clocks = <&wiz0_refclk_dig>;
+ assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz1_pll1_refclk {
+ assigned-clocks = <&wiz1_pll1_refclk>;
+ assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz1_refclk_dig {
+ assigned-clocks = <&wiz1_refclk_dig>;
+ assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz2_pll1_refclk {
+ assigned-clocks = <&wiz2_pll1_refclk>;
+ assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz2_refclk_dig {
+ assigned-clocks = <&wiz2_refclk_dig>;
+ assigned-clock-parents = <&cmn_refclk1>;
+};
+
&serdes0 {
- serdes0_pcie_link: link@0 {
+ assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>;
+ assigned-clock-parents = <&wiz0_pll1_refclk>;
+
+ serdes0_pcie_link: phy@0 {
reg = <0>;
cdns,num-lanes = <1>;
#phy-cells = <0>;
@@ -646,7 +684,10 @@
};
&serdes1 {
- serdes1_pcie_link: link@0 {
+ assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>;
+ assigned-clock-parents = <&wiz1_pll1_refclk>;
+
+ serdes1_pcie_link: phy@0 {
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
@@ -656,7 +697,10 @@
};
&serdes2 {
- serdes2_pcie_link: link@0 {
+ assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>;
+ assigned-clock-parents = <&wiz2_pll1_refclk>;
+
+ serdes2_pcie_link: phy@0 {
reg = <0>;
cdns,num-lanes = <2>;
#phy-cells = <0>;
@@ -718,3 +762,11 @@
&dss {
status = "disabled";
};
+
+&icssg0_mdio {
+ status = "disabled";
+};
+
+&icssg1_mdio {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 3bcafe4..cf34823 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -8,6 +8,20 @@
#include <dt-bindings/mux/mux.h>
#include <dt-bindings/mux/ti-serdes.h>
+/ {
+ cmn_refclk: clock-cmnrefclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ cmn_refclk1: clock-cmnrefclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+};
+
&cbass_main {
msmc_ram: sram@70000000 {
compatible = "mmio-sram";
@@ -338,24 +352,12 @@
pinctrl-single,function-mask = <0xffffffff>;
};
- dummy_cmn_refclk: dummy-cmn-refclk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- };
-
- dummy_cmn_refclk1: dummy-cmn-refclk1 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- };
-
serdes_wiz0: wiz@5000000 {
compatible = "ti,j721e-wiz-16g";
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&cmn_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
@@ -364,21 +366,21 @@
ranges = <0x5000000 0x0 0x5000000 0x10000>;
wiz0_pll0_refclk: pll0-refclk {
- clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 292 11>, <&cmn_refclk>;
#clock-cells = <0>;
assigned-clocks = <&wiz0_pll0_refclk>;
assigned-clock-parents = <&k3_clks 292 11>;
};
wiz0_pll1_refclk: pll1-refclk {
- clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 292 0>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz0_pll1_refclk>;
assigned-clock-parents = <&k3_clks 292 0>;
};
wiz0_refclk_dig: refclk-dig {
- clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&cmn_refclk>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz0_refclk_dig>;
assigned-clock-parents = <&k3_clks 292 11>;
@@ -400,10 +402,13 @@
reg = <0x5000000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
+ #clock-cells = <1>;
resets = <&serdes_wiz0 0>;
reset-names = "sierra_reset";
- clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
- clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>,
+ <&wiz0_pll0_refclk>, <&wiz0_pll1_refclk>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+ "pll0_refclk", "pll1_refclk";
};
};
@@ -412,7 +417,7 @@
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&cmn_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
@@ -421,21 +426,21 @@
ranges = <0x5010000 0x0 0x5010000 0x10000>;
wiz1_pll0_refclk: pll0-refclk {
- clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 293 13>, <&cmn_refclk>;
#clock-cells = <0>;
assigned-clocks = <&wiz1_pll0_refclk>;
assigned-clock-parents = <&k3_clks 293 13>;
};
wiz1_pll1_refclk: pll1-refclk {
- clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 293 0>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz1_pll1_refclk>;
assigned-clock-parents = <&k3_clks 293 0>;
};
wiz1_refclk_dig: refclk-dig {
- clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&cmn_refclk>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz1_refclk_dig>;
assigned-clock-parents = <&k3_clks 293 13>;
@@ -457,10 +462,13 @@
reg = <0x5010000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
+ #clock-cells = <1>;
resets = <&serdes_wiz1 0>;
reset-names = "sierra_reset";
- clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>;
- clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>,
+ <&wiz1_pll0_refclk>, <&wiz1_pll1_refclk>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+ "pll0_refclk", "pll1_refclk";
};
};
@@ -469,7 +477,7 @@
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&cmn_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
@@ -478,21 +486,21 @@
ranges = <0x5020000 0x0 0x5020000 0x10000>;
wiz2_pll0_refclk: pll0-refclk {
- clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 294 11>, <&cmn_refclk>;
#clock-cells = <0>;
assigned-clocks = <&wiz2_pll0_refclk>;
assigned-clock-parents = <&k3_clks 294 11>;
};
wiz2_pll1_refclk: pll1-refclk {
- clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 294 0>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz2_pll1_refclk>;
assigned-clock-parents = <&k3_clks 294 0>;
};
wiz2_refclk_dig: refclk-dig {
- clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&cmn_refclk>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz2_refclk_dig>;
assigned-clock-parents = <&k3_clks 294 11>;
@@ -514,10 +522,13 @@
reg = <0x5020000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
+ #clock-cells = <1>;
resets = <&serdes_wiz2 0>;
reset-names = "sierra_reset";
- clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>;
- clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>,
+ <&wiz2_pll0_refclk>, <&wiz2_pll1_refclk>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+ "pll0_refclk", "pll1_refclk";
};
};
@@ -526,7 +537,7 @@
#address-cells = <1>;
#size-cells = <1>;
power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&cmn_refclk>;
clock-names = "fck", "core_ref_clk", "ext_ref_clk";
assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
@@ -535,21 +546,21 @@
ranges = <0x5030000 0x0 0x5030000 0x10000>;
wiz3_pll0_refclk: pll0-refclk {
- clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+ clocks = <&k3_clks 295 9>, <&cmn_refclk>;
#clock-cells = <0>;
assigned-clocks = <&wiz3_pll0_refclk>;
assigned-clock-parents = <&k3_clks 295 9>;
};
wiz3_pll1_refclk: pll1-refclk {
- clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 295 0>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz3_pll1_refclk>;
assigned-clock-parents = <&k3_clks 295 0>;
};
wiz3_refclk_dig: refclk-dig {
- clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+ clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&cmn_refclk>, <&cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz3_refclk_dig>;
assigned-clock-parents = <&k3_clks 295 9>;
@@ -571,10 +582,13 @@
reg = <0x5030000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
+ #clock-cells = <1>;
resets = <&serdes_wiz3 0>;
reset-names = "sierra_reset";
- clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>;
- clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+ clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>,
+ <&wiz3_pll0_refclk>, <&wiz3_pll1_refclk>;
+ clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+ "pll0_refclk", "pll1_refclk";
};
};
@@ -775,8 +789,6 @@
main_uart0: serial@2800000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -788,8 +800,6 @@
main_uart1: serial@2810000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -801,8 +811,6 @@
main_uart2: serial@2820000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -814,8 +822,6 @@
main_uart3: serial@2830000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02830000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -827,8 +833,6 @@
main_uart4: serial@2840000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02840000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -840,8 +844,6 @@
main_uart5: serial@2850000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02850000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -853,8 +855,6 @@
main_uart6: serial@2860000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02860000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -866,8 +866,6 @@
main_uart7: serial@2870000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02870000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -879,8 +877,6 @@
main_uart8: serial@2880000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02880000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -892,8 +888,6 @@
main_uart9: serial@2890000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02890000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -1794,6 +1788,16 @@
reg-names = "iram", "control", "debug";
firmware-name = "j7-txpru0_1-fw";
};
+
+ icssg0_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x100>;
+ clocks = <&k3_clks 119 1>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ };
};
icssg1: icssg@b100000 {
@@ -1925,5 +1929,15 @@
reg-names = "iram", "control", "debug";
firmware-name = "j7-txpru1_1-fw";
};
+
+ icssg1_mdio: mdio@32400 {
+ compatible = "ti,davinci_mdio";
+ reg = <0x32400 0x100>;
+ clocks = <&k3_clks 120 4>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus_freq = <1000000>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 5e825e4..d2dceda 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -73,8 +73,6 @@
wkup_uart0: serial@42300000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
@@ -86,8 +84,6 @@
mcu_uart0: serial@40a00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
index bf0620a..29a4d9f 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
@@ -68,3 +68,11 @@
&gpio {
status = "okay";
};
+
+&pwm_mux {
+ groups = "pwm0_gpio16_grp", "pwm1_gpio17_grp", "pwm2_gpio18_grp", "pwm3_gpio19_grp";
+};
+
+&pwm {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
index 17934fd..4b4231f 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -432,6 +432,15 @@
reg = <0 0x28330000 0 0x1000>;
status = "disabled";
};
+
+ pwm: pwm@241c0000 {
+ compatible = "toshiba,visconti-pwm";
+ reg = <0 0x241c0000 0 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_mux>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi
index 34de000..a480c6b 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi
@@ -90,4 +90,9 @@
groups = "i2c8_grp";
bias-pull-up;
};
+
+ pwm_mux: pwm_mux {
+ function = "pwm";
+ };
+
};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 08c6f76..f423d08 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -289,6 +289,7 @@
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_UFS_QCOM=m
CONFIG_SCSI_UFS_HISI=y
+CONFIG_SCSI_UFS_EXYNOS=y
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
@@ -491,7 +492,6 @@
CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SUN6I=y
CONFIG_SPI_SPIDEV=m
-CONFIG_MTK_PMIC_WRAP=m
CONFIG_SPMI=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_MAX77620=y
@@ -530,6 +530,7 @@
CONFIG_GPIO_PL061=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_UNIPHIER=y
+CONFIG_GPIO_VISCONTI=y
CONFIG_GPIO_WCD934X=m
CONFIG_GPIO_XGENE=y
CONFIG_GPIO_XGENE_SB=y
@@ -662,6 +663,7 @@
CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_FCP=m
CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_VIDEO_QCOM_VENUS=m
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_VIDEO_RCAR_DRIF=m
CONFIG_VIDEO_IMX219=m
@@ -701,6 +703,7 @@
CONFIG_DRM_PANEL_SITRONIX_ST7703=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
CONFIG_DRM_DISPLAY_CONNECTOR=m
+CONFIG_DRM_LONTIUM_LT8912B=m
CONFIG_DRM_NWL_MIPI_DSI=m
CONFIG_DRM_LONTIUM_LT9611=m
CONFIG_DRM_PARADE_PS8640=m
@@ -774,6 +777,8 @@
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
CONFIG_SND_SOC_GTM601=m
+CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
+CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_RT5659=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
@@ -795,6 +800,8 @@
CONFIG_USB=y
CONFIG_USB_OTG=y
CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=m
+CONFIG_USB_XHCI_PCI_RENESAS=m
CONFIG_USB_XHCI_TEGRA=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_EXYNOS=y
@@ -866,6 +873,7 @@
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SUNXI=y
CONFIG_MMC_BCM2835=y
+CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MMC_OWL=y
@@ -884,6 +892,7 @@
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_EDAC=y
CONFIG_EDAC_GHES=y
+CONFIG_EDAC_LAYERSCAPE=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_HYM8563=m
@@ -987,6 +996,7 @@
CONFIG_SM_DISPCC_8250=y
CONFIG_QCOM_HFPLL=y
CONFIG_CLK_GFM_LPASS_SM8250=m
+CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_ARM_MHU=y
@@ -1043,6 +1053,7 @@
CONFIG_ARCH_R8A77990=y
CONFIG_ARCH_R8A77995=y
CONFIG_ARCH_R8A779A0=y
+CONFIG_ARCH_R9A07G044=y
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
@@ -1059,6 +1070,7 @@
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_MAX9611=m
+CONFIG_QCOM_SPMI_VADC=m
CONFIG_QCOM_SPMI_ADC5=m
CONFIG_ROCKCHIP_SARADC=m
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
@@ -1083,6 +1095,7 @@
CONFIG_PWM_SL28CPLD=m
CONFIG_PWM_SUN4I=m
CONFIG_PWM_TEGRA=m
+CONFIG_PWM_VISCONTI=m
CONFIG_SL28CPLD_INTC=y
CONFIG_QCOM_PDC=y
CONFIG_RESET_IMX7=y
@@ -1110,6 +1123,7 @@
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_PHY_SAMSUNG_UFS=y
CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_PHY_UNIPHIER_USB3=y
CONFIG_PHY_TEGRA_XUSB=y
@@ -1148,6 +1162,7 @@
CONFIG_INTERCONNECT_QCOM_SDM845=y
CONFIG_INTERCONNECT_QCOM_SM8150=m
CONFIG_INTERCONNECT_QCOM_SM8250=m
+CONFIG_INTERCONNECT_QCOM_SM8350=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
diff --git a/arch/csky/Kbuild b/arch/csky/Kbuild
new file mode 100644
index 0000000..a4e40e5
--- /dev/null
+++ b/arch/csky/Kbuild
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only
diff --git a/arch/h8300/Kbuild b/arch/h8300/Kbuild
new file mode 100644
index 0000000..b2583e7
--- /dev/null
+++ b/arch/h8300/Kbuild
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += kernel/ mm/ boot/dts/
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index ba0f26c..eb4cb8f 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@@ -30,9 +30,6 @@
CROSS_COMPILE := $(call cc-cross-prefix, h8300-unknown-linux- h8300-linux-)
endif
-core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
-core-y += arch/$(ARCH)/boot/dts/
-
libs-y += arch/$(ARCH)/lib/
boot := arch/h8300/boot
diff --git a/arch/hexagon/Kbuild b/arch/hexagon/Kbuild
new file mode 100644
index 0000000..8421bab
--- /dev/null
+++ b/arch/hexagon/Kbuild
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += kernel/ mm/ lib/
diff --git a/arch/hexagon/Makefile b/arch/hexagon/Makefile
index 74b644e..44312bc 100644
--- a/arch/hexagon/Makefile
+++ b/arch/hexagon/Makefile
@@ -34,7 +34,3 @@
KBUILD_AFLAGS += -DTHREADINFO_REG=$(TIR_NAME)
head-y := arch/hexagon/kernel/head.o
-
-core-y += arch/hexagon/kernel/ \
- arch/hexagon/mm/ \
- arch/hexagon/lib/
diff --git a/arch/ia64/Kbuild b/arch/ia64/Kbuild
new file mode 100644
index 0000000..a4e40e5
--- /dev/null
+++ b/arch/ia64/Kbuild
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index c54055a..dd0c0ec 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -97,7 +97,6 @@
head-$(CONFIG_M68000) := arch/m68k/68000/head.o
head-$(CONFIG_COLDFIRE) := arch/m68k/coldfire/head.o
-core-y += arch/m68k/
libs-y += arch/m68k/lib/
diff --git a/arch/microblaze/Kbuild b/arch/microblaze/Kbuild
new file mode 100644
index 0000000..a4e40e5
--- /dev/null
+++ b/arch/microblaze/Kbuild
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 258234c..4e942b7 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -332,9 +332,6 @@
libs-y += arch/mips/lib/
libs-$(CONFIG_MIPS_FP_SUPPORT) += arch/mips/math-emu/
-# See arch/mips/Kbuild for content of core part of the kernel
-core-y += arch/mips/
-
drivers-y += arch/mips/crypto/
# suspend and hibernation support
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index e4b7839..3548b3b 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -40,7 +40,7 @@
UBSAN_SANITIZE := n
# decompressor objects (linked with vmlinuz)
-vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o
+vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o $(obj)/bswapsi.o
ifdef CONFIG_DEBUG_ZBOOT
vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT) += $(obj)/dbg.o
@@ -54,7 +54,7 @@
$(obj)/uart-ath79.c: $(srctree)/arch/mips/ath79/early_printk.c
$(call cmd,shipped)
-vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o $(obj)/bswapsi.o
+vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
extra-y += ashldi3.c
$(obj)/ashldi3.c: $(obj)/%.c: $(srctree)/lib/%.c FORCE
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 3d70d15..aae1346 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -7,6 +7,8 @@
* Author: Wu Zhangjin <wuzhangjin@gmail.com>
*/
+#define DISABLE_BRANCH_PROFILING
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
diff --git a/arch/mips/include/asm/vdso/vdso.h b/arch/mips/include/asm/vdso/vdso.h
index 737ddfc..a327ca212 100644
--- a/arch/mips/include/asm/vdso/vdso.h
+++ b/arch/mips/include/asm/vdso/vdso.h
@@ -67,7 +67,7 @@
static inline void __iomem *get_gic(const struct vdso_data *data)
{
- return (void __iomem *)data - PAGE_SIZE;
+ return (void __iomem *)((unsigned long)data & PAGE_MASK) - PAGE_SIZE;
}
#endif /* CONFIG_CLKSRC_MIPS_GIC */
diff --git a/arch/nds32/Kbuild b/arch/nds32/Kbuild
new file mode 100644
index 0000000..a4e40e5
--- /dev/null
+++ b/arch/nds32/Kbuild
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only
diff --git a/arch/nds32/boot/.gitignore b/arch/nds32/boot/.gitignore
new file mode 100644
index 0000000..9182a3a
--- /dev/null
+++ b/arch/nds32/boot/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+/Image
diff --git a/arch/nios2/Kbuild b/arch/nios2/Kbuild
new file mode 100644
index 0000000..a4e40e5
--- /dev/null
+++ b/arch/nios2/Kbuild
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only
diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile
index 410e7ab..c52de52 100644
--- a/arch/openrisc/Makefile
+++ b/arch/openrisc/Makefile
@@ -42,7 +42,6 @@
head-y := arch/openrisc/kernel/head.o
-core-y += arch/openrisc/
libs-y += $(LIBGCC)
PHONY += vmlinux.bin
diff --git a/arch/parisc/Kbuild b/arch/parisc/Kbuild
new file mode 100644
index 0000000..a4e40e5
--- /dev/null
+++ b/arch/parisc/Kbuild
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only
diff --git a/arch/parisc/kernel/syscalls/Makefile b/arch/parisc/kernel/syscalls/Makefile
index 0f2ea5b..d63f18d 100644
--- a/arch/parisc/kernel/syscalls/Makefile
+++ b/arch/parisc/kernel/syscalls/Makefile
@@ -10,25 +10,15 @@
systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
- cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr --abis $(abis) $< $@
+ cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr --abis common,$* $< $@
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) $(systbl) --abis $(abis) $< $@
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) --abis common,$* $< $@
-$(uapi)/unistd_32.h: abis := common,32
-$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
+$(uapi)/unistd_%.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-$(uapi)/unistd_64.h: abis := common,64
-$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
- $(call if_changed,syshdr)
-
-$(kapi)/syscall_table_32.h: abis := common,32
-$(kapi)/syscall_table_32.h: $(syscall) $(systbl) FORCE
- $(call if_changed,systbl)
-
-$(kapi)/syscall_table_64.h: abis := common,64
-$(kapi)/syscall_table_64.h: $(syscall) $(systbl) FORCE
+$(kapi)/syscall_table_%.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h unistd_64.h
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 712c5e8..6505d66 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -267,9 +267,6 @@
head-$(CONFIG_ALTIVEC) += arch/powerpc/kernel/vector.o
head-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += arch/powerpc/kernel/prom_init.o
-# See arch/powerpc/Kbuild for content of core part of the kernel
-core-y += arch/powerpc/
-
# Default to zImage, override when needed
all: zImage
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 99ecd8b..bc74afd 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -99,7 +99,6 @@
head-y := arch/riscv/kernel/head.o
-core-y += arch/riscv/
core-$(CONFIG_RISCV_ERRATA_ALTERNATIVE) += arch/riscv/errata/
libs-y += arch/riscv/lib/
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 07b2328..a0e2130 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -163,7 +163,6 @@
select HAVE_GCC_PLUGINS
select HAVE_GENERIC_VDSO
select HAVE_IOREMAP_PROT if PCI
- select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZ4
@@ -438,6 +437,7 @@
select COMPAT_OLD_SIGACTION
select HAVE_UID16
depends on MULTIUSER
+ depends on !CC_IS_CLANG
help
Select this option if you want to enable your system kernel to
handle system-calls from ELF binaries for 31 bit ESA. This option
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 098abe3..1e317287 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -129,9 +129,6 @@
head-y := arch/s390/kernel/head64.o
-# See arch/s390/Kbuild for content of core part of the kernel
-core-y += arch/s390/
-
libs-y += arch/s390/lib/
drivers-y += drivers/s390/
@@ -166,6 +163,19 @@
archprepare:
$(Q)$(MAKE) $(build)=$(syscalls) kapi
$(Q)$(MAKE) $(build)=$(tools) kapi
+ifeq ($(KBUILD_EXTMOD),)
+# We need to generate vdso-offsets.h before compiling certain files in kernel/.
+# In order to do that, we should use the archprepare target, but we can't since
+# asm-offsets.h is included in some files used to generate vdso-offsets.h, and
+# asm-offsets.h is built in prepare0, for which archprepare is a dependency.
+# Therefore we need to generate the header after prepare0 has been made, hence
+# this hack.
+prepare: vdso_prepare
+vdso_prepare: prepare0
+ $(Q)$(MAKE) $(build)=arch/s390/kernel/vdso64 include/generated/vdso64-offsets.h
+ $(if $(CONFIG_COMPAT),$(Q)$(MAKE) \
+ $(build)=arch/s390/kernel/vdso32 include/generated/vdso32-offsets.h)
+endif
# Don't use tabs in echo arguments
define archhelp
diff --git a/arch/s390/boot/startup.c b/arch/s390/boot/startup.c
index bbe4df6..d0cf216 100644
--- a/arch/s390/boot/startup.c
+++ b/arch/s390/boot/startup.c
@@ -23,6 +23,7 @@
unsigned long __bootdata_preserved(MODULES_VADDR);
unsigned long __bootdata_preserved(MODULES_END);
unsigned long __bootdata(ident_map_size);
+int __bootdata(is_full_image) = 1;
u64 __bootdata_preserved(stfle_fac_list[16]);
u64 __bootdata_preserved(alt_stfle_fac_list[16]);
diff --git a/arch/s390/boot/uv.c b/arch/s390/boot/uv.c
index 82b99b9..f6b0c4f 100644
--- a/arch/s390/boot/uv.c
+++ b/arch/s390/boot/uv.c
@@ -36,6 +36,7 @@
uv_info.max_sec_stor_addr = ALIGN(uvcb.max_guest_stor_addr, PAGE_SIZE);
uv_info.max_num_sec_conf = uvcb.max_num_sec_conf;
uv_info.max_guest_cpu_id = uvcb.max_guest_cpu_id;
+ uv_info.uv_feature_indications = uvcb.uv_feature_indications;
}
#ifdef CONFIG_PROTECTED_VIRTUALIZATION_GUEST
diff --git a/arch/s390/include/asm/ap.h b/arch/s390/include/asm/ap.h
index 837d169..3afbee2 100644
--- a/arch/s390/include/asm/ap.h
+++ b/arch/s390/include/asm/ap.h
@@ -53,18 +53,20 @@
*/
static inline bool ap_instructions_available(void)
{
- register unsigned long reg0 asm ("0") = AP_MKQID(0, 0);
- register unsigned long reg1 asm ("1") = 0;
- register unsigned long reg2 asm ("2") = 0;
+ unsigned long reg0 = AP_MKQID(0, 0);
+ unsigned long reg1 = 0;
asm volatile(
- " .long 0xb2af0000\n" /* PQAP(TAPQ) */
- "0: la %0,1\n"
+ " lgr 0,%[reg0]\n" /* qid into gr0 */
+ " lghi 1,0\n" /* 0 into gr1 */
+ " lghi 2,0\n" /* 0 into gr2 */
+ " .long 0xb2af0000\n" /* PQAP(TAPQ) */
+ "0: la %[reg1],1\n" /* 1 into reg1 */
"1:\n"
EX_TABLE(0b, 1b)
- : "+d" (reg1), "+d" (reg2)
- : "d" (reg0)
- : "cc");
+ : [reg1] "+&d" (reg1)
+ : [reg0] "d" (reg0)
+ : "cc", "0", "1", "2");
return reg1 != 0;
}
@@ -77,14 +79,18 @@
*/
static inline struct ap_queue_status ap_tapq(ap_qid_t qid, unsigned long *info)
{
- register unsigned long reg0 asm ("0") = qid;
- register struct ap_queue_status reg1 asm ("1");
- register unsigned long reg2 asm ("2");
+ struct ap_queue_status reg1;
+ unsigned long reg2;
- asm volatile(".long 0xb2af0000" /* PQAP(TAPQ) */
- : "=d" (reg1), "=d" (reg2)
- : "d" (reg0)
- : "cc");
+ asm volatile(
+ " lgr 0,%[qid]\n" /* qid into gr0 */
+ " lghi 2,0\n" /* 0 into gr2 */
+ " .long 0xb2af0000\n" /* PQAP(TAPQ) */
+ " lgr %[reg1],1\n" /* gr1 (status) into reg1 */
+ " lgr %[reg2],2\n" /* gr2 into reg2 */
+ : [reg1] "=&d" (reg1), [reg2] "=&d" (reg2)
+ : [qid] "d" (qid)
+ : "cc", "0", "1", "2");
if (info)
*info = reg2;
return reg1;
@@ -115,14 +121,16 @@
*/
static inline struct ap_queue_status ap_rapq(ap_qid_t qid)
{
- register unsigned long reg0 asm ("0") = qid | (1UL << 24);
- register struct ap_queue_status reg1 asm ("1");
+ unsigned long reg0 = qid | (1UL << 24); /* fc 1UL is RAPQ */
+ struct ap_queue_status reg1;
asm volatile(
- ".long 0xb2af0000" /* PQAP(RAPQ) */
- : "=d" (reg1)
- : "d" (reg0)
- : "cc");
+ " lgr 0,%[reg0]\n" /* qid arg into gr0 */
+ " .long 0xb2af0000\n" /* PQAP(RAPQ) */
+ " lgr %[reg1],1\n" /* gr1 (status) into reg1 */
+ : [reg1] "=&d" (reg1)
+ : [reg0] "d" (reg0)
+ : "cc", "0", "1");
return reg1;
}
@@ -134,14 +142,16 @@
*/
static inline struct ap_queue_status ap_zapq(ap_qid_t qid)
{
- register unsigned long reg0 asm ("0") = qid | (2UL << 24);
- register struct ap_queue_status reg1 asm ("1");
+ unsigned long reg0 = qid | (2UL << 24); /* fc 2UL is ZAPQ */
+ struct ap_queue_status reg1;
asm volatile(
- ".long 0xb2af0000" /* PQAP(ZAPQ) */
- : "=d" (reg1)
- : "d" (reg0)
- : "cc");
+ " lgr 0,%[reg0]\n" /* qid arg into gr0 */
+ " .long 0xb2af0000\n" /* PQAP(ZAPQ) */
+ " lgr %[reg1],1\n" /* gr1 (status) into reg1 */
+ : [reg1] "=&d" (reg1)
+ : [reg0] "d" (reg0)
+ : "cc", "0", "1");
return reg1;
}
@@ -172,18 +182,20 @@
*/
static inline int ap_qci(struct ap_config_info *config)
{
- register unsigned long reg0 asm ("0") = 4UL << 24;
- register unsigned long reg1 asm ("1") = -EOPNOTSUPP;
- register struct ap_config_info *reg2 asm ("2") = config;
+ unsigned long reg0 = 4UL << 24; /* fc 4UL is QCI */
+ unsigned long reg1 = -EOPNOTSUPP;
+ struct ap_config_info *reg2 = config;
asm volatile(
- ".long 0xb2af0000\n" /* PQAP(QCI) */
- "0: la %0,0\n"
+ " lgr 0,%[reg0]\n" /* QCI fc into gr0 */
+ " lgr 2,%[reg2]\n" /* ptr to config into gr2 */
+ " .long 0xb2af0000\n" /* PQAP(QCI) */
+ "0: la %[reg1],0\n" /* good case, QCI fc available */
"1:\n"
EX_TABLE(0b, 1b)
- : "+d" (reg1)
- : "d" (reg0), "d" (reg2)
- : "cc", "memory");
+ : [reg1] "+&d" (reg1)
+ : [reg0] "d" (reg0), [reg2] "d" (reg2)
+ : "cc", "memory", "0", "2");
return reg1;
}
@@ -220,21 +232,25 @@
struct ap_qirq_ctrl qirqctrl,
void *ind)
{
- register unsigned long reg0 asm ("0") = qid | (3UL << 24);
- register union {
+ unsigned long reg0 = qid | (3UL << 24); /* fc 3UL is AQIC */
+ union {
unsigned long value;
struct ap_qirq_ctrl qirqctrl;
struct ap_queue_status status;
- } reg1 asm ("1");
- register void *reg2 asm ("2") = ind;
+ } reg1;
+ void *reg2 = ind;
reg1.qirqctrl = qirqctrl;
asm volatile(
- ".long 0xb2af0000" /* PQAP(AQIC) */
- : "+d" (reg1)
- : "d" (reg0), "d" (reg2)
- : "cc");
+ " lgr 0,%[reg0]\n" /* qid param into gr0 */
+ " lgr 1,%[reg1]\n" /* irq ctrl into gr1 */
+ " lgr 2,%[reg2]\n" /* ni addr into gr2 */
+ " .long 0xb2af0000\n" /* PQAP(AQIC) */
+ " lgr %[reg1],1\n" /* gr1 (status) into reg1 */
+ : [reg1] "+&d" (reg1)
+ : [reg0] "d" (reg0), [reg2] "d" (reg2)
+ : "cc", "0", "1", "2");
return reg1.status;
}
@@ -268,21 +284,24 @@
static inline struct ap_queue_status ap_qact(ap_qid_t qid, int ifbit,
union ap_qact_ap_info *apinfo)
{
- register unsigned long reg0 asm ("0") = qid | (5UL << 24)
- | ((ifbit & 0x01) << 22);
- register union {
+ unsigned long reg0 = qid | (5UL << 24) | ((ifbit & 0x01) << 22);
+ union {
unsigned long value;
struct ap_queue_status status;
- } reg1 asm ("1");
- register unsigned long reg2 asm ("2");
+ } reg1;
+ unsigned long reg2;
reg1.value = apinfo->val;
asm volatile(
- ".long 0xb2af0000" /* PQAP(QACT) */
- : "+d" (reg1), "=d" (reg2)
- : "d" (reg0)
- : "cc");
+ " lgr 0,%[reg0]\n" /* qid param into gr0 */
+ " lgr 1,%[reg1]\n" /* qact in info into gr1 */
+ " .long 0xb2af0000\n" /* PQAP(QACT) */
+ " lgr %[reg1],1\n" /* gr1 (status) into reg1 */
+ " lgr %[reg2],2\n" /* qact out info into reg2 */
+ : [reg1] "+&d" (reg1), [reg2] "=&d" (reg2)
+ : [reg0] "d" (reg0)
+ : "cc", "0", "1", "2");
apinfo->val = reg2;
return reg1.status;
}
@@ -303,19 +322,24 @@
unsigned long long psmid,
void *msg, size_t length)
{
- register unsigned long reg0 asm ("0") = qid | 0x40000000UL;
- register struct ap_queue_status reg1 asm ("1");
- register unsigned long reg2 asm ("2") = (unsigned long) msg;
- register unsigned long reg3 asm ("3") = (unsigned long) length;
- register unsigned long reg4 asm ("4") = (unsigned int) (psmid >> 32);
- register unsigned long reg5 asm ("5") = psmid & 0xffffffff;
+ unsigned long reg0 = qid | 0x40000000UL; /* 0x4... is last msg part */
+ union register_pair nqap_r1, nqap_r2;
+ struct ap_queue_status reg1;
+
+ nqap_r1.even = (unsigned int)(psmid >> 32);
+ nqap_r1.odd = psmid & 0xffffffff;
+ nqap_r2.even = (unsigned long)msg;
+ nqap_r2.odd = (unsigned long)length;
asm volatile (
- "0: .long 0xb2ad0042\n" /* NQAP */
- " brc 2,0b"
- : "+d" (reg0), "=d" (reg1), "+d" (reg2), "+d" (reg3)
- : "d" (reg4), "d" (reg5)
- : "cc", "memory");
+ " lgr 0,%[reg0]\n" /* qid param in gr0 */
+ "0: .insn rre,0xb2ad0000,%[nqap_r1],%[nqap_r2]\n"
+ " brc 2,0b\n" /* handle partial completion */
+ " lgr %[reg1],1\n" /* gr1 (status) into reg1 */
+ : [reg0] "+&d" (reg0), [reg1] "=&d" (reg1),
+ [nqap_r2] "+&d" (nqap_r2.pair)
+ : [nqap_r1] "d" (nqap_r1.pair)
+ : "cc", "memory", "0", "1");
return reg1;
}
@@ -325,6 +349,8 @@
* @psmid: Pointer to program supplied message identifier
* @msg: The message text
* @length: The message length
+ * @reslength: Resitual length on return
+ * @resgr0: input: gr0 value (only used if != 0), output: resitual gr0 content
*
* Returns AP queue status structure.
* Condition code 1 on DQAP means the receive has taken place
@@ -336,27 +362,65 @@
* Note that gpr2 is used by the DQAP instruction to keep track of
* any 'residual' length, in case the instruction gets interrupted.
* Hence it gets zeroed before the instruction.
+ * If the message does not fit into the buffer, this function will
+ * return with a truncated message and the reply in the firmware queue
+ * is not removed. This is indicated to the caller with an
+ * ap_queue_status response_code value of all bits on (0xFF) and (if
+ * the reslength ptr is given) the remaining length is stored in
+ * *reslength and (if the resgr0 ptr is given) the updated gr0 value
+ * for further processing of this msg entry is stored in *resgr0. The
+ * caller needs to detect this situation and should invoke ap_dqap
+ * with a valid resgr0 ptr and a value in there != 0 to indicate that
+ * *resgr0 is to be used instead of qid to further process this entry.
*/
static inline struct ap_queue_status ap_dqap(ap_qid_t qid,
unsigned long long *psmid,
- void *msg, size_t length)
+ void *msg, size_t length,
+ size_t *reslength,
+ unsigned long *resgr0)
{
- register unsigned long reg0 asm("0") = qid | 0x80000000UL;
- register struct ap_queue_status reg1 asm ("1");
- register unsigned long reg2 asm("2") = 0UL;
- register unsigned long reg4 asm("4") = (unsigned long) msg;
- register unsigned long reg5 asm("5") = (unsigned long) length;
- register unsigned long reg6 asm("6") = 0UL;
- register unsigned long reg7 asm("7") = 0UL;
+ unsigned long reg0 = resgr0 && *resgr0 ? *resgr0 : qid | 0x80000000UL;
+ struct ap_queue_status reg1;
+ unsigned long reg2;
+ union register_pair rp1, rp2;
+ rp1.even = 0UL;
+ rp1.odd = 0UL;
+ rp2.even = (unsigned long)msg;
+ rp2.odd = (unsigned long)length;
asm volatile(
- "0: .long 0xb2ae0064\n" /* DQAP */
- " brc 6,0b\n"
- : "+d" (reg0), "=d" (reg1), "+d" (reg2),
- "+d" (reg4), "+d" (reg5), "+d" (reg6), "+d" (reg7)
- : : "cc", "memory");
- *psmid = (((unsigned long long) reg6) << 32) + reg7;
+ " lgr 0,%[reg0]\n" /* qid param into gr0 */
+ " lghi 2,0\n" /* 0 into gr2 (res length) */
+ "0: ltgr %N[rp2],%N[rp2]\n" /* check buf len */
+ " jz 2f\n" /* go out if buf len is 0 */
+ "1: .insn rre,0xb2ae0000,%[rp1],%[rp2]\n"
+ " brc 6,0b\n" /* handle partial complete */
+ "2: lgr %[reg0],0\n" /* gr0 (qid + info) into reg0 */
+ " lgr %[reg1],1\n" /* gr1 (status) into reg1 */
+ " lgr %[reg2],2\n" /* gr2 (res length) into reg2 */
+ : [reg0] "+&d" (reg0), [reg1] "=&d" (reg1), [reg2] "=&d" (reg2),
+ [rp1] "+&d" (rp1.pair), [rp2] "+&d" (rp2.pair)
+ :
+ : "cc", "memory", "0", "1", "2");
+
+ if (reslength)
+ *reslength = reg2;
+ if (reg2 != 0 && rp2.odd == 0) {
+ /*
+ * Partially complete, status in gr1 is not set.
+ * Signal the caller that this dqap is only partially received
+ * with a special status response code 0xFF and *resgr0 updated
+ */
+ reg1.response_code = 0xFF;
+ if (resgr0)
+ *resgr0 = reg0;
+ } else {
+ *psmid = (((unsigned long long)rp1.even) << 32) + rp1.odd;
+ if (resgr0)
+ *resgr0 = 0;
+ }
+
return reg1;
}
diff --git a/arch/s390/include/asm/cpu_mcf.h b/arch/s390/include/asm/cpu_mcf.h
index 4dcefdd..ca0e0e5 100644
--- a/arch/s390/include/asm/cpu_mcf.h
+++ b/arch/s390/include/asm/cpu_mcf.h
@@ -32,39 +32,22 @@
[CPUMF_CTR_SET_MT_DIAG] = 0x20,
};
-static inline void ctr_set_enable(u64 *state, int ctr_set)
-{
- *state |= cpumf_ctr_ctl[ctr_set] << CPUMF_LCCTL_ENABLE_SHIFT;
-}
-static inline void ctr_set_disable(u64 *state, int ctr_set)
-{
- *state &= ~(cpumf_ctr_ctl[ctr_set] << CPUMF_LCCTL_ENABLE_SHIFT);
-}
-static inline void ctr_set_start(u64 *state, int ctr_set)
-{
- *state |= cpumf_ctr_ctl[ctr_set] << CPUMF_LCCTL_ACTCTL_SHIFT;
-}
-static inline void ctr_set_stop(u64 *state, int ctr_set)
-{
- *state &= ~(cpumf_ctr_ctl[ctr_set] << CPUMF_LCCTL_ACTCTL_SHIFT);
-}
-
-static inline void ctr_set_multiple_enable(u64 *state, u64 ctrsets)
+static inline void ctr_set_enable(u64 *state, u64 ctrsets)
{
*state |= ctrsets << CPUMF_LCCTL_ENABLE_SHIFT;
}
-static inline void ctr_set_multiple_disable(u64 *state, u64 ctrsets)
+static inline void ctr_set_disable(u64 *state, u64 ctrsets)
{
*state &= ~(ctrsets << CPUMF_LCCTL_ENABLE_SHIFT);
}
-static inline void ctr_set_multiple_start(u64 *state, u64 ctrsets)
+static inline void ctr_set_start(u64 *state, u64 ctrsets)
{
*state |= ctrsets << CPUMF_LCCTL_ACTCTL_SHIFT;
}
-static inline void ctr_set_multiple_stop(u64 *state, u64 ctrsets)
+static inline void ctr_set_stop(u64 *state, u64 ctrsets)
{
*state &= ~(ctrsets << CPUMF_LCCTL_ACTCTL_SHIFT);
}
@@ -92,8 +75,15 @@
struct cpumf_ctr_info info;
atomic_t ctr_set[CPUMF_CTR_SET_MAX];
atomic64_t alert;
- u64 state;
+ u64 state; /* For perf_event_open SVC */
+ u64 dev_state; /* For /dev/hwctr */
unsigned int flags;
+ size_t used; /* Bytes used in data */
+ size_t usedss; /* Bytes used in start/stop */
+ unsigned char start[PAGE_SIZE]; /* Counter set at event add */
+ unsigned char stop[PAGE_SIZE]; /* Counter set at event delete */
+ unsigned char data[PAGE_SIZE]; /* Counter set at /dev/hwctr */
+ unsigned int sets; /* # Counter set saved in memory */
};
DECLARE_PER_CPU(struct cpu_cf_events, cpu_cf_events);
@@ -124,4 +114,6 @@
size_t cpum_cf_ctrset_size(enum cpumf_ctr_set ctrset,
struct cpumf_ctr_info *info);
+int cfset_online_cpu(unsigned int cpu);
+int cfset_offline_cpu(unsigned int cpu);
#endif /* _ASM_S390_CPU_MCF_H */
diff --git a/arch/s390/include/asm/ctl_reg.h b/arch/s390/include/asm/ctl_reg.h
index ed5efbb..adc0179 100644
--- a/arch/s390/include/asm/ctl_reg.h
+++ b/arch/s390/include/asm/ctl_reg.h
@@ -21,8 +21,6 @@
#define CR0_INTERRUPT_KEY_SUBMASK BIT(63 - 57)
#define CR0_MEASUREMENT_ALERT_SUBMASK BIT(63 - 58)
-#define CR2_GUARDED_STORAGE BIT(63 - 59)
-
#define CR14_UNUSED_32 BIT(63 - 32)
#define CR14_UNUSED_33 BIT(63 - 33)
#define CR14_CHANNEL_REPORT_SUBMASK BIT(63 - 35)
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 66d51ad..bd00c94 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -144,10 +144,6 @@
#include <linux/sched/mm.h> /* for task_struct */
#include <asm/mmu_context.h>
-#include <asm/vdso.h>
-
-extern unsigned int vdso_enabled;
-
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
@@ -176,7 +172,7 @@
!current->mm->context.alloc_pgste) { \
set_thread_flag(TIF_PGSTE); \
set_pt_regs_flag(task_pt_regs(current), \
- PIF_SYSCALL_RESTART); \
+ PIF_EXECVE_PGSTE_RESTART); \
_state->rc = -EAGAIN; \
} \
_state->rc; \
@@ -268,11 +264,10 @@
#define STACK_RND_MASK MMAP_RND_MASK
/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
-#define ARCH_DLINFO \
-do { \
- if (vdso_enabled) \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, \
- (unsigned long)current->mm->context.vdso_base); \
+#define ARCH_DLINFO \
+do { \
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, \
+ (unsigned long)current->mm->context.vdso_base); \
} while (0)
struct linux_binprm;
diff --git a/arch/s390/include/asm/entry-common.h b/arch/s390/include/asm/entry-common.h
index baa8005..17aead8 100644
--- a/arch/s390/include/asm/entry-common.h
+++ b/arch/s390/include/asm/entry-common.h
@@ -14,7 +14,6 @@
#define ARCH_EXIT_TO_USER_MODE_WORK (_TIF_GUARDED_STORAGE | _TIF_PER_TRAP)
void do_per_trap(struct pt_regs *regs);
-void do_syscall(struct pt_regs *regs);
#ifdef CONFIG_DEBUG_ENTRY
static __always_inline void arch_check_user_regs(struct pt_regs *regs)
diff --git a/arch/s390/include/asm/linkage.h b/arch/s390/include/asm/linkage.h
index a0a7a2c..24e8fed 100644
--- a/arch/s390/include/asm/linkage.h
+++ b/arch/s390/include/asm/linkage.h
@@ -5,7 +5,7 @@
#include <asm/asm-const.h>
#include <linux/stringify.h>
-#define __ALIGN .align 4, 0x07
+#define __ALIGN .align 16, 0x07
#define __ALIGN_STR __stringify(__ALIGN)
/*
diff --git a/arch/s390/include/asm/nmi.h b/arch/s390/include/asm/nmi.h
index 20e51c9..2db45d7 100644
--- a/arch/s390/include/asm/nmi.h
+++ b/arch/s390/include/asm/nmi.h
@@ -23,12 +23,16 @@
#define MCCK_CODE_SYSTEM_DAMAGE BIT(63)
#define MCCK_CODE_EXT_DAMAGE BIT(63 - 5)
#define MCCK_CODE_CP BIT(63 - 9)
-#define MCCK_CODE_CPU_TIMER_VALID BIT(63 - 46)
+#define MCCK_CODE_STG_ERROR BIT(63 - 16)
+#define MCCK_CODE_STG_KEY_ERROR BIT(63 - 18)
+#define MCCK_CODE_STG_DEGRAD BIT(63 - 19)
#define MCCK_CODE_PSW_MWP_VALID BIT(63 - 20)
#define MCCK_CODE_PSW_IA_VALID BIT(63 - 23)
+#define MCCK_CODE_STG_FAIL_ADDR BIT(63 - 24)
#define MCCK_CODE_CR_VALID BIT(63 - 29)
#define MCCK_CODE_GS_VALID BIT(63 - 36)
#define MCCK_CODE_FC_VALID BIT(63 - 43)
+#define MCCK_CODE_CPU_TIMER_VALID BIT(63 - 46)
#ifndef __ASSEMBLY__
diff --git a/arch/s390/include/asm/preempt.h b/arch/s390/include/asm/preempt.h
index 23ff51b..d9d5350 100644
--- a/arch/s390/include/asm/preempt.h
+++ b/arch/s390/include/asm/preempt.h
@@ -29,12 +29,6 @@
old, new) != old);
}
-#define init_task_preempt_count(p) do { } while (0)
-
-#define init_idle_preempt_count(p, cpu) do { \
- S390_lowcore.preempt_count = PREEMPT_DISABLED; \
-} while (0)
-
static inline void set_preempt_need_resched(void)
{
__atomic_and(~PREEMPT_NEED_RESCHED, &S390_lowcore.preempt_count);
@@ -88,12 +82,6 @@
S390_lowcore.preempt_count = pc;
}
-#define init_task_preempt_count(p) do { } while (0)
-
-#define init_idle_preempt_count(p, cpu) do { \
- S390_lowcore.preempt_count = PREEMPT_DISABLED; \
-} while (0)
-
static inline void set_preempt_need_resched(void)
{
}
@@ -130,6 +118,10 @@
#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+#define init_task_preempt_count(p) do { } while (0)
+/* Deferred to CPU bringup time */
+#define init_idle_preempt_count(p, cpu) do { } while (0)
+
#ifdef CONFIG_PREEMPTION
extern void preempt_schedule(void);
#define __preempt_schedule() preempt_schedule()
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index c7850d6..61b22aa 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -11,15 +11,15 @@
#include <uapi/asm/ptrace.h>
#include <asm/tpi.h>
-#define PIF_SYSCALL 0 /* inside a system call */
-#define PIF_SYSCALL_RESTART 1 /* restart the current system call */
-#define PIF_SYSCALL_RET_SET 2 /* return value was set via ptrace */
-#define PIF_GUEST_FAULT 3 /* indicates program check in sie64a */
+#define PIF_SYSCALL 0 /* inside a system call */
+#define PIF_EXECVE_PGSTE_RESTART 1 /* restart execve for PGSTE binaries */
+#define PIF_SYSCALL_RET_SET 2 /* return value was set via ptrace */
+#define PIF_GUEST_FAULT 3 /* indicates program check in sie64a */
-#define _PIF_SYSCALL BIT(PIF_SYSCALL)
-#define _PIF_SYSCALL_RESTART BIT(PIF_SYSCALL_RESTART)
-#define _PIF_SYSCALL_RET_SET BIT(PIF_SYSCALL_RET_SET)
-#define _PIF_GUEST_FAULT BIT(PIF_GUEST_FAULT)
+#define _PIF_SYSCALL BIT(PIF_SYSCALL)
+#define _PIF_EXECVE_PGSTE_RESTART BIT(PIF_EXECVE_PGSTE_RESTART)
+#define _PIF_SYSCALL_RET_SET BIT(PIF_SYSCALL_RET_SET)
+#define _PIF_GUEST_FAULT BIT(PIF_GUEST_FAULT)
#ifndef __ASSEMBLY__
@@ -162,6 +162,14 @@
return !!(regs->flags & (1UL << flag));
}
+static inline int test_and_clear_pt_regs_flag(struct pt_regs *regs, int flag)
+{
+ int ret = test_pt_regs_flag(regs, flag);
+
+ clear_pt_regs_flag(regs, flag);
+ return ret;
+}
+
/*
* These are defined as per linux/ptrace.h, which see.
*/
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index a8b75da..3a77aa9 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -159,6 +159,8 @@
return __kaslr_offset;
}
+extern int is_full_image;
+
static inline u32 gen_lpswe(unsigned long addr)
{
BUILD_BUG_ON(addr > 0xfff);
diff --git a/arch/s390/include/asm/softirq_stack.h b/arch/s390/include/asm/softirq_stack.h
new file mode 100644
index 0000000..fd17f25
--- /dev/null
+++ b/arch/s390/include/asm/softirq_stack.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __ASM_S390_SOFTIRQ_STACK_H
+#define __ASM_S390_SOFTIRQ_STACK_H
+
+#include <asm/lowcore.h>
+#include <asm/stacktrace.h>
+
+static inline void do_softirq_own_stack(void)
+{
+ call_on_stack(0, S390_lowcore.async_stack, void, __do_softirq);
+}
+
+#endif /* __ASM_S390_SOFTIRQ_STACK_H */
diff --git a/arch/s390/include/asm/stacktrace.h b/arch/s390/include/asm/stacktrace.h
index 76c6034..3d8a4b9 100644
--- a/arch/s390/include/asm/stacktrace.h
+++ b/arch/s390/include/asm/stacktrace.h
@@ -74,23 +74,6 @@
((unsigned long)__builtin_frame_address(0) - \
offsetof(struct stack_frame, back_chain))
-#define CALL_ARGS_0() \
- register unsigned long r2 asm("2")
-#define CALL_ARGS_1(arg1) \
- register unsigned long r2 asm("2") = (unsigned long)(arg1)
-#define CALL_ARGS_2(arg1, arg2) \
- CALL_ARGS_1(arg1); \
- register unsigned long r3 asm("3") = (unsigned long)(arg2)
-#define CALL_ARGS_3(arg1, arg2, arg3) \
- CALL_ARGS_2(arg1, arg2); \
- register unsigned long r4 asm("4") = (unsigned long)(arg3)
-#define CALL_ARGS_4(arg1, arg2, arg3, arg4) \
- CALL_ARGS_3(arg1, arg2, arg3); \
- register unsigned long r4 asm("5") = (unsigned long)(arg4)
-#define CALL_ARGS_5(arg1, arg2, arg3, arg4, arg5) \
- CALL_ARGS_4(arg1, arg2, arg3, arg4); \
- register unsigned long r4 asm("6") = (unsigned long)(arg5)
-
/*
* To keep this simple mark register 2-6 as being changed (volatile)
* by the called function, even though register 6 is saved/nonvolatile.
@@ -109,34 +92,113 @@
#define CALL_CLOBBER_1 CALL_CLOBBER_2, "3"
#define CALL_CLOBBER_0 CALL_CLOBBER_1
-#define CALL_ON_STACK(fn, stack, nr, args...) \
+#define CALL_LARGS_0(...) \
+ long dummy = 0
+#define CALL_LARGS_1(t1, a1) \
+ long arg1 = (long)(t1)(a1)
+#define CALL_LARGS_2(t1, a1, t2, a2) \
+ CALL_LARGS_1(t1, a1); \
+ long arg2 = (long)(t2)(a2)
+#define CALL_LARGS_3(t1, a1, t2, a2, t3, a3) \
+ CALL_LARGS_2(t1, a1, t2, a2); \
+ long arg3 = (long)(t3)(a3)
+#define CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4) \
+ CALL_LARGS_3(t1, a1, t2, a2, t3, a3); \
+ long arg4 = (long)(t4)(a4)
+#define CALL_LARGS_5(t1, a1, t2, a2, t3, a3, t4, a4, t5, a5) \
+ CALL_LARGS_4(t1, a1, t2, a2, t3, a3, t4, a4); \
+ long arg5 = (long)(t5)(a5)
+
+#define CALL_REGS_0 \
+ register long r2 asm("2") = dummy
+#define CALL_REGS_1 \
+ register long r2 asm("2") = arg1
+#define CALL_REGS_2 \
+ CALL_REGS_1; \
+ register long r3 asm("3") = arg2
+#define CALL_REGS_3 \
+ CALL_REGS_2; \
+ register long r4 asm("4") = arg3
+#define CALL_REGS_4 \
+ CALL_REGS_3; \
+ register long r5 asm("5") = arg4
+#define CALL_REGS_5 \
+ CALL_REGS_4; \
+ register long r6 asm("6") = arg5
+
+#define CALL_TYPECHECK_0(...)
+#define CALL_TYPECHECK_1(t, a, ...) \
+ typecheck(t, a)
+#define CALL_TYPECHECK_2(t, a, ...) \
+ CALL_TYPECHECK_1(__VA_ARGS__); \
+ typecheck(t, a)
+#define CALL_TYPECHECK_3(t, a, ...) \
+ CALL_TYPECHECK_2(__VA_ARGS__); \
+ typecheck(t, a)
+#define CALL_TYPECHECK_4(t, a, ...) \
+ CALL_TYPECHECK_3(__VA_ARGS__); \
+ typecheck(t, a)
+#define CALL_TYPECHECK_5(t, a, ...) \
+ CALL_TYPECHECK_4(__VA_ARGS__); \
+ typecheck(t, a)
+
+#define CALL_PARM_0(...) void
+#define CALL_PARM_1(t, a, ...) t
+#define CALL_PARM_2(t, a, ...) t, CALL_PARM_1(__VA_ARGS__)
+#define CALL_PARM_3(t, a, ...) t, CALL_PARM_2(__VA_ARGS__)
+#define CALL_PARM_4(t, a, ...) t, CALL_PARM_3(__VA_ARGS__)
+#define CALL_PARM_5(t, a, ...) t, CALL_PARM_4(__VA_ARGS__)
+#define CALL_PARM_6(t, a, ...) t, CALL_PARM_5(__VA_ARGS__)
+
+/*
+ * Use call_on_stack() to call a function switching to a specified
+ * stack. Proper sign and zero extension of function arguments is
+ * done. Usage:
+ *
+ * rc = call_on_stack(nr, stack, rettype, fn, t1, a1, t2, a2, ...)
+ *
+ * - nr specifies the number of function arguments of fn.
+ * - stack specifies the stack to be used.
+ * - fn is the function to be called.
+ * - rettype is the return type of fn.
+ * - t1, a1, ... are pairs, where t1 must match the type of the first
+ * argument of fn, t2 the second, etc. a1 is the corresponding
+ * first function argument (not name), etc.
+ */
+#define call_on_stack(nr, stack, rettype, fn, ...) \
({ \
+ rettype (*__fn)(CALL_PARM_##nr(__VA_ARGS__)) = fn; \
unsigned long frame = current_frame_address(); \
- CALL_ARGS_##nr(args); \
+ unsigned long __stack = stack; \
unsigned long prev; \
+ CALL_LARGS_##nr(__VA_ARGS__); \
+ CALL_REGS_##nr; \
\
+ CALL_TYPECHECK_##nr(__VA_ARGS__); \
asm volatile( \
- " la %[_prev],0(15)\n" \
+ " lgr %[_prev],15\n" \
" lg 15,%[_stack]\n" \
" stg %[_frame],%[_bc](15)\n" \
" brasl 14,%[_fn]\n" \
- " la 15,0(%[_prev])\n" \
- : [_prev] "=&a" (prev), CALL_FMT_##nr \
- : [_stack] "R" (stack), \
+ " lgr 15,%[_prev]\n" \
+ : [_prev] "=&d" (prev), CALL_FMT_##nr \
+ : [_stack] "R" (__stack), \
[_bc] "i" (offsetof(struct stack_frame, back_chain)), \
[_frame] "d" (frame), \
- [_fn] "X" (fn) : CALL_CLOBBER_##nr); \
- r2; \
+ [_fn] "X" (__fn) : CALL_CLOBBER_##nr); \
+ (rettype)r2; \
})
-#define CALL_ON_STACK_NORETURN(fn, stack) \
+#define call_on_stack_noreturn(fn, stack) \
({ \
+ void (*__fn)(void) = fn; \
+ \
asm volatile( \
" la 15,0(%[_stack])\n" \
" xc %[_bc](8,15),%[_bc](15)\n" \
" brasl 14,%[_fn]\n" \
::[_bc] "i" (offsetof(struct stack_frame, back_chain)), \
- [_stack] "a" (stack), [_fn] "X" (fn)); \
+ [_stack] "a" (stack), [_fn] "X" (__fn)); \
BUG(); \
})
diff --git a/arch/s390/include/asm/uv.h b/arch/s390/include/asm/uv.h
index 7b98d4c..12c5f006 100644
--- a/arch/s390/include/asm/uv.h
+++ b/arch/s390/include/asm/uv.h
@@ -73,6 +73,10 @@
BIT_UVC_CMD_UNPIN_PAGE_SHARED = 22,
};
+enum uv_feat_ind {
+ BIT_UV_FEAT_MISC = 0,
+};
+
struct uv_cb_header {
u16 len;
u16 cmd; /* Command Code */
@@ -97,7 +101,8 @@
u64 max_guest_stor_addr;
u8 reserved88[158 - 136];
u16 max_guest_cpu_id;
- u8 reserveda0[200 - 160];
+ u64 uv_feature_indications;
+ u8 reserveda0[200 - 168];
} __packed __aligned(8);
/* Initialize Ultravisor */
@@ -274,6 +279,7 @@
unsigned long max_sec_stor_addr;
unsigned int max_num_sec_conf;
unsigned short max_guest_cpu_id;
+ unsigned long uv_feature_indications;
};
extern struct uv_info uv_info;
diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h
index b45e3dd..53165aa 100644
--- a/arch/s390/include/asm/vdso.h
+++ b/arch/s390/include/asm/vdso.h
@@ -4,18 +4,31 @@
#include <vdso/datapage.h>
-/* Default link address for the vDSO */
-#define VDSO64_LBASE 0
-
-#define __VVAR_PAGES 2
-
-#define VDSO_VERSION_STRING LINUX_2.6.29
-
#ifndef __ASSEMBLY__
+#include <generated/vdso64-offsets.h>
+#ifdef CONFIG_COMPAT
+#include <generated/vdso32-offsets.h>
+#endif
+
+#define VDSO64_SYMBOL(tsk, name) ((tsk)->mm->context.vdso_base + (vdso64_offset_##name))
+#ifdef CONFIG_COMPAT
+#define VDSO32_SYMBOL(tsk, name) ((tsk)->mm->context.vdso_base + (vdso32_offset_##name))
+#else
+#define VDSO32_SYMBOL(tsk, name) (-1UL)
+#endif
+
extern struct vdso_data *vdso_data;
int vdso_getcpu_init(void);
#endif /* __ASSEMBLY__ */
+
+/* Default link address for the vDSO */
+#define VDSO_LBASE 0
+
+#define __VVAR_PAGES 2
+
+#define VDSO_VERSION_STRING LINUX_2.6.29
+
#endif /* __S390_VDSO_H__ */
diff --git a/arch/s390/include/asm/vdso/gettimeofday.h b/arch/s390/include/asm/vdso/gettimeofday.h
index 383c53c..d6465b2 100644
--- a/arch/s390/include/asm/vdso/gettimeofday.h
+++ b/arch/s390/include/asm/vdso/gettimeofday.h
@@ -8,7 +8,6 @@
#include <asm/timex.h>
#include <asm/unistd.h>
-#include <asm/vdso.h>
#include <linux/compiler.h>
#define vdso_calc_delta __arch_vdso_calc_delta
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 68ca183..4a44ba5 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -71,10 +71,10 @@
obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_cpum_cf_common.o
obj-$(CONFIG_PERF_EVENTS) += perf_cpum_cf.o perf_cpum_sf.o
obj-$(CONFIG_PERF_EVENTS) += perf_cpum_cf_events.o perf_regs.o
-obj-$(CONFIG_PERF_EVENTS) += perf_cpum_cf_diag.o
obj-$(CONFIG_TRACEPOINTS) += trace.o
obj-$(findstring y, $(CONFIG_PROTECTED_VIRTUALIZATION_GUEST) $(CONFIG_PGSTE)) += uv.o
# vdso
obj-y += vdso64/
+obj-$(CONFIG_COMPAT) += vdso32/
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index f53605a..77ff213 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -14,8 +14,6 @@
#include <linux/pgtable.h>
#include <asm/idle.h>
#include <asm/gmap.h>
-#include <asm/nmi.h>
-#include <asm/setup.h>
#include <asm/stacktrace.h>
int main(void)
@@ -108,7 +106,6 @@
OFFSET(__LC_LAST_UPDATE_CLOCK, lowcore, last_update_clock);
OFFSET(__LC_INT_CLOCK, lowcore, int_clock);
OFFSET(__LC_MCCK_CLOCK, lowcore, mcck_clock);
- OFFSET(__LC_CLOCK_COMPARATOR, lowcore, clock_comparator);
OFFSET(__LC_BOOT_CLOCK, lowcore, boot_clock);
OFFSET(__LC_CURRENT, lowcore, current_task);
OFFSET(__LC_KERNEL_STACK, lowcore, kernel_stack);
@@ -145,9 +142,6 @@
OFFSET(__LC_CREGS_SAVE_AREA, lowcore, cregs_save_area);
OFFSET(__LC_PGM_TDB, lowcore, pgm_tdb);
BLANK();
- /* extended machine check save area */
- OFFSET(__MCESA_GS_SAVE_AREA, mcesa, guarded_storage_save_area);
- BLANK();
/* gmap/sie offsets */
OFFSET(__GMAP_ASCE, gmap, asce);
OFFSET(__SIE_PROG0C, kvm_s390_sie_block, prog0c);
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index 1d0e17e..cca142f 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -28,6 +28,7 @@
#include <linux/uaccess.h>
#include <asm/lowcore.h>
#include <asm/switch_to.h>
+#include <asm/vdso.h>
#include "compat_linux.h"
#include "compat_ptrace.h"
#include "entry.h"
@@ -118,7 +119,6 @@
fpregs_load((_s390_fp_regs *) &user_sregs.fpregs, ¤t->thread.fpu);
clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */
- clear_pt_regs_flag(regs, PIF_SYSCALL_RESTART);
return 0;
}
@@ -304,11 +304,7 @@
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
} else {
- /* Signal frames without vectors registers are short ! */
- __u16 __user *svc = (void __user *) frame + frame_size - 2;
- if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
- return -EFAULT;
- restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
+ restorer = VDSO32_SYMBOL(current, sigreturn);
}
/* Set up registers for signal handler */
@@ -371,10 +367,7 @@
restorer = (unsigned long __force)
ksig->ka.sa.sa_restorer | PSW32_ADDR_AMODE;
} else {
- __u16 __user *svc = &frame->svc_insn;
- if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
- return -EFAULT;
- restorer = (unsigned long __force) svc | PSW32_ADDR_AMODE;
+ restorer = VDSO32_SYMBOL(current, rt_sigreturn);
}
/* Create siginfo on the signal stack */
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index c2cf79d..fb84e3f 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -33,6 +33,8 @@
#include <asm/switch_to.h>
#include "entry.h"
+int __bootdata(is_full_image);
+
static void __init reset_tod_clock(void)
{
union tod_clock clk;
@@ -279,7 +281,7 @@
static void __init check_image_bootable(void)
{
- if (!memcmp(EP_STRING, (void *)EP_OFFSET, strlen(EP_STRING)))
+ if (is_full_image)
return;
sclp_early_printk("Linux kernel boot failure: An attempt to boot a vmlinux ELF image failed.\n");
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 3e8c666..5a2f70c 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -14,7 +14,6 @@
#include <asm/alternative-asm.h>
#include <asm/processor.h>
#include <asm/cache.h>
-#include <asm/ctl_reg.h>
#include <asm/dwarf.h>
#include <asm/errno.h>
#include <asm/ptrace.h>
@@ -129,6 +128,24 @@
"jnz .+8; .long 0xb2e8d000", 82
.endm
+ /*
+ * The CHKSTG macro jumps to the provided label in case the
+ * machine check interruption code reports one of unrecoverable
+ * storage errors:
+ * - Storage error uncorrected
+ * - Storage key error uncorrected
+ * - Storage degradation with Failing-storage-address validity
+ */
+ .macro CHKSTG errlabel
+ TSTMSK __LC_MCCK_CODE,(MCCK_CODE_STG_ERROR|MCCK_CODE_STG_KEY_ERROR)
+ jnz \errlabel
+ TSTMSK __LC_MCCK_CODE,MCCK_CODE_STG_DEGRAD
+ jz oklabel\@
+ TSTMSK __LC_MCCK_CODE,MCCK_CODE_STG_FAIL_ADDR
+ jnz \errlabel
+oklabel\@:
+ .endm
+
#if IS_ENABLED(CONFIG_KVM)
/*
* The OUTSIDE macro jumps to the provided label in case the value
@@ -148,6 +165,13 @@
clgr %r14,%r13
jhe \outside_label
.endm
+
+ .macro SIEEXIT
+ lg %r9,__SF_SIE_CONTROL(%r15) # get control block pointer
+ ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
+ lctlg %c1,%c1,__LC_KERNEL_ASCE # load primary asce
+ larl %r9,sie_exit # skip forward to sie_exit
+ .endm
#endif
GEN_BR_THUNK %r14
@@ -235,7 +259,6 @@
# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
# Other instructions between sie64a and .Lsie_done should not cause program
# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
-# See also .Lcleanup_sie
.Lrewind_pad6:
nopr 7
.Lrewind_pad4:
@@ -341,10 +364,7 @@
#if IS_ENABLED(CONFIG_KVM)
# cleanup critical section for program checks in sie64a
OUTSIDE %r9,.Lsie_gmap,.Lsie_done,1f
- lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer
- ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE
- lctlg %c1,%c1,__LC_KERNEL_ASCE # load primary asce
- larl %r9,sie_exit # skip forward to sie_exit
+ SIEEXIT
lghi %r10,_PIF_GUEST_FAULT
#endif
1: tmhh %r8,0x4000 # PER bit set in old PSW ?
@@ -410,7 +430,8 @@
jnz 1f
#if IS_ENABLED(CONFIG_KVM)
OUTSIDE %r9,.Lsie_gmap,.Lsie_done,0f
- brasl %r14,.Lcleanup_sie
+ BPENTER __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
+ SIEEXIT
#endif
0: CHECK_STACK __LC_SAVE_AREA_ASYNC
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
@@ -484,8 +505,6 @@
BPOFF
la %r1,4095 # validate r1
spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # validate cpu timer
- sckc __LC_CLOCK_COMPARATOR # validate comparator
- lam %a0,%a15,__LC_AREGS_SAVE_AREA-4095(%r1) # validate acrs
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# validate gprs
lg %r12,__LC_CURRENT
lmg %r8,%r9,__LC_MCK_OLD_PSW
@@ -496,41 +515,7 @@
la %r14,4095
lctlg %c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r14) # validate ctl regs
ptlb
- lg %r11,__LC_MCESAD-4095(%r14) # extended machine check save area
- nill %r11,0xfc00 # MCESA_ORIGIN_MASK
- TSTMSK __LC_CREGS_SAVE_AREA+16-4095(%r14),CR2_GUARDED_STORAGE
- jno 0f
- TSTMSK __LC_MCCK_CODE,MCCK_CODE_GS_VALID
- jno 0f
- .insn rxy,0xe3000000004d,0,__MCESA_GS_SAVE_AREA(%r11) # LGSC
-0: l %r14,__LC_FP_CREG_SAVE_AREA-4095(%r14)
- TSTMSK __LC_MCCK_CODE,MCCK_CODE_FC_VALID
- jo 0f
- sr %r14,%r14
-0: sfpc %r14
- TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX
- jo 0f
- lghi %r14,__LC_FPREGS_SAVE_AREA
- ld %f0,0(%r14)
- ld %f1,8(%r14)
- ld %f2,16(%r14)
- ld %f3,24(%r14)
- ld %f4,32(%r14)
- ld %f5,40(%r14)
- ld %f6,48(%r14)
- ld %f7,56(%r14)
- ld %f8,64(%r14)
- ld %f9,72(%r14)
- ld %f10,80(%r14)
- ld %f11,88(%r14)
- ld %f12,96(%r14)
- ld %f13,104(%r14)
- ld %f14,112(%r14)
- ld %f15,120(%r14)
- j 1f
-0: VLM %v0,%v15,0,%r11
- VLM %v16,%v31,256,%r11
-1: lghi %r14,__LC_CPU_TIMER_SAVE_AREA
+ lghi %r14,__LC_CPU_TIMER_SAVE_AREA
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
TSTMSK __LC_MCCK_CODE,MCCK_CODE_CPU_TIMER_VALID
jo 3f
@@ -546,24 +531,29 @@
3: TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_MWP_VALID
jno .Lmcck_panic
tmhh %r8,0x0001 # interrupting from user ?
- jnz 4f
+ jnz 6f
TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_IA_VALID
jno .Lmcck_panic
-4: ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off
- tmhh %r8,0x0001 # interrupting from user ?
- jnz .Lmcck_user
#if IS_ENABLED(CONFIG_KVM)
- OUTSIDE %r9,.Lsie_gmap,.Lsie_done,.Lmcck_stack
- OUTSIDE %r9,.Lsie_entry,.Lsie_skip,5f
+ OUTSIDE %r9,.Lsie_gmap,.Lsie_done,6f
+ OUTSIDE %r9,.Lsie_entry,.Lsie_skip,4f
oi __LC_CPU_FLAGS+7, _CIF_MCCK_GUEST
-5: brasl %r14,.Lcleanup_sie
-#endif
+ j 5f
+4: CHKSTG .Lmcck_panic
+5: larl %r14,.Lstosm_tmp
+ stosm 0(%r14),0x04 # turn dat on, keep irqs off
+ BPENTER __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
+ SIEEXIT
j .Lmcck_stack
-.Lmcck_user:
+#endif
+6: CHKSTG .Lmcck_panic
+ larl %r14,.Lstosm_tmp
+ stosm 0(%r14),0x04 # turn dat on, keep irqs off
+ tmhh %r8,0x0001 # interrupting from user ?
+ jz .Lmcck_stack
BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
.Lmcck_stack:
lg %r15,__LC_MCCK_STACK
-.Lmcck_skip:
la %r11,STACK_FRAME_OVERHEAD(%r15)
stctg %c1,%c1,__PT_CR1(%r11)
lctlg %c1,%c1,__LC_KERNEL_ASCE
@@ -605,8 +595,33 @@
b __LC_RETURN_MCCK_LPSWE
.Lmcck_panic:
- lg %r15,__LC_NODAT_STACK
- j .Lmcck_skip
+ /*
+ * Iterate over all possible CPU addresses in the range 0..0xffff
+ * and stop each CPU using signal processor. Use compare and swap
+ * to allow just one CPU-stopper and prevent concurrent CPUs from
+ * stopping each other while leaving the others running.
+ */
+ lhi %r5,0
+ lhi %r6,1
+ larl %r7,.Lstop_lock
+ cs %r5,%r6,0(%r7) # single CPU-stopper only
+ jnz 4f
+ larl %r7,.Lthis_cpu
+ stap 0(%r7) # this CPU address
+ lh %r4,0(%r7)
+ nilh %r4,0
+ lhi %r0,1
+ sll %r0,16 # CPU counter
+ lhi %r3,0 # next CPU address
+0: cr %r3,%r4
+ je 2f
+1: sigp %r1,%r3,SIGP_STOP # stop next CPU
+ brc SIGP_CC_BUSY,1b
+2: ahi %r3,1
+ brct %r0,0b
+3: sigp %r1,%r4,SIGP_STOP # stop this CPU
+ brc SIGP_CC_BUSY,3b
+4: j 4b
ENDPROC(mcck_int_handler)
#
@@ -657,15 +672,11 @@
ENDPROC(stack_overflow)
#endif
-#if IS_ENABLED(CONFIG_KVM)
-.Lcleanup_sie:
- BPENTER __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
- lg %r9,__SF_SIE_CONTROL(%r15) # get control block pointer
- ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
- lctlg %c1,%c1,__LC_KERNEL_ASCE
- larl %r9,sie_exit # skip forward to sie_exit
- BR_EX %r14,%r13
-#endif
+ .section .data, "aw"
+ .align 4
+.Lstop_lock: .long 0
+.Lthis_cpu: .short 0
+.Lstosm_tmp: .byte 0
.section .rodata, "a"
#define SYSCALL(esame,emu) .quad __s390x_ ## esame
.globl sys_call_table
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index c0df406..234d085 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -110,15 +110,17 @@
{
unsigned long frame = current_frame_address();
- return !!!((S390_lowcore.async_stack - frame) >> (PAGE_SHIFT + THREAD_SIZE_ORDER));
+ return ((S390_lowcore.async_stack ^ frame) & ~(THREAD_SIZE - 1)) == 0;
}
static void do_irq_async(struct pt_regs *regs, int irq)
{
- if (on_async_stack())
+ if (on_async_stack()) {
do_IRQ(regs, irq);
- else
- CALL_ON_STACK(do_IRQ, S390_lowcore.async_stack, 2, regs, irq);
+ } else {
+ call_on_stack(2, S390_lowcore.async_stack, void, do_IRQ,
+ struct pt_regs *, regs, int, irq);
+ }
}
static int irq_pending(struct pt_regs *regs)
@@ -266,24 +268,6 @@
}
/*
- * Switch to the asynchronous interrupt stack for softirq execution.
- */
-void do_softirq_own_stack(void)
-{
- unsigned long old, new;
-
- old = current_stack_pointer();
- /* Check against async. stack address range. */
- new = S390_lowcore.async_stack;
- if (((new - old) >> (PAGE_SHIFT + THREAD_SIZE_ORDER)) != 0) {
- CALL_ON_STACK(__do_softirq, new, 0);
- } else {
- /* We are already on the async stack. */
- __do_softirq();
- }
-}
-
-/*
* ext_int_hash[index] is the list head for all external interrupts that hash
* to this index.
*/
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 528bb31..52d056a 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -92,11 +92,6 @@
}
NOKPROBE_SYMBOL(copy_instruction);
-static inline int is_kernel_addr(void *addr)
-{
- return addr < (void *)_end;
-}
-
static int s390_get_insn_slot(struct kprobe *p)
{
/*
@@ -105,7 +100,7 @@
* field can be patched and executed within the insn slot.
*/
p->ainsn.insn = NULL;
- if (is_kernel_addr(p->addr))
+ if (is_kernel((unsigned long)p->addr))
p->ainsn.insn = get_s390_insn_slot();
else if (is_module_addr(p->addr))
p->ainsn.insn = get_insn_slot();
@@ -117,7 +112,7 @@
{
if (!p->ainsn.insn)
return;
- if (is_kernel_addr(p->addr))
+ if (is_kernel((unsigned long)p->addr))
free_s390_insn_slot(p->ainsn.insn, 0);
else
free_insn_slot(p->ainsn.insn, 0);
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index d91989c..1005a69 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -132,7 +132,8 @@
int rc;
preempt_disable();
- rc = CALL_ON_STACK(do_start_kdump, S390_lowcore.nodat_stack, 1, image);
+ rc = call_on_stack(1, S390_lowcore.nodat_stack, unsigned long, do_start_kdump,
+ unsigned long, (unsigned long)image);
preempt_enable();
return rc == 0;
#else
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 11f8c29..20f8e18 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -189,12 +189,16 @@
* returns 0 if all required registers are available
* returns 1 otherwise
*/
-static int notrace s390_check_registers(union mci mci, int umode)
+static int notrace s390_validate_registers(union mci mci, int umode)
{
+ struct mcesa *mcesa;
+ void *fpt_save_area;
union ctlreg2 cr2;
int kill_task;
+ u64 zero;
kill_task = 0;
+ zero = 0;
if (!mci.gr) {
/*
@@ -205,14 +209,6 @@
s390_handle_damage();
kill_task = 1;
}
- /* Check control registers */
- if (!mci.cr) {
- /*
- * Control registers have unknown contents.
- * Can't recover and therefore stopping machine.
- */
- s390_handle_damage();
- }
if (!mci.fp) {
/*
* Floating point registers can't be restored. If the
@@ -225,35 +221,89 @@
if (!test_cpu_flag(CIF_FPU))
kill_task = 1;
}
+ fpt_save_area = &S390_lowcore.floating_pt_save_area;
if (!mci.fc) {
/*
* Floating point control register can't be restored.
* If the kernel currently uses the floating pointer
* registers and needs the FPC register the system is
* stopped. If the process has its floating pointer
- * registers loaded it is terminated.
+ * registers loaded it is terminated. Otherwise the
+ * FPC is just validated.
*/
if (S390_lowcore.fpu_flags & KERNEL_FPC)
s390_handle_damage();
+ asm volatile(
+ " lfpc %0\n"
+ :
+ : "Q" (zero));
if (!test_cpu_flag(CIF_FPU))
kill_task = 1;
+ } else {
+ asm volatile(
+ " lfpc %0\n"
+ :
+ : "Q" (S390_lowcore.fpt_creg_save_area));
}
- if (MACHINE_HAS_VX) {
+ mcesa = (struct mcesa *)(S390_lowcore.mcesad & MCESA_ORIGIN_MASK);
+ if (!MACHINE_HAS_VX) {
+ /* Validate floating point registers */
+ asm volatile(
+ " ld 0,0(%0)\n"
+ " ld 1,8(%0)\n"
+ " ld 2,16(%0)\n"
+ " ld 3,24(%0)\n"
+ " ld 4,32(%0)\n"
+ " ld 5,40(%0)\n"
+ " ld 6,48(%0)\n"
+ " ld 7,56(%0)\n"
+ " ld 8,64(%0)\n"
+ " ld 9,72(%0)\n"
+ " ld 10,80(%0)\n"
+ " ld 11,88(%0)\n"
+ " ld 12,96(%0)\n"
+ " ld 13,104(%0)\n"
+ " ld 14,112(%0)\n"
+ " ld 15,120(%0)\n"
+ :
+ : "a" (fpt_save_area)
+ : "memory");
+ } else {
+ /* Validate vector registers */
+ union ctlreg0 cr0;
+
if (!mci.vr) {
/*
* Vector registers can't be restored. If the kernel
* currently uses vector registers the system is
* stopped. If the process has its vector registers
- * loaded it is terminated.
+ * loaded it is terminated. Otherwise just validate
+ * the registers.
*/
if (S390_lowcore.fpu_flags & KERNEL_VXR)
s390_handle_damage();
if (!test_cpu_flag(CIF_FPU))
kill_task = 1;
}
+ cr0.val = S390_lowcore.cregs_save_area[0];
+ cr0.afp = cr0.vx = 1;
+ __ctl_load(cr0.val, 0, 0);
+ asm volatile(
+ " la 1,%0\n"
+ " .word 0xe70f,0x1000,0x0036\n" /* vlm 0,15,0(1) */
+ " .word 0xe70f,0x1100,0x0c36\n" /* vlm 16,31,256(1) */
+ :
+ : "Q" (*(struct vx_array *)mcesa->vector_save_area)
+ : "1");
+ __ctl_load(S390_lowcore.cregs_save_area[0], 0, 0);
}
- /* Check if access registers are valid */
+ /* Validate access registers */
+ asm volatile(
+ " lam 0,15,0(%0)\n"
+ :
+ : "a" (&S390_lowcore.access_regs_save_area)
+ : "memory");
if (!mci.ar) {
/*
* Access registers have unknown contents.
@@ -261,7 +311,7 @@
*/
kill_task = 1;
}
- /* Check guarded storage registers */
+ /* Validate guarded storage registers */
cr2.val = S390_lowcore.cregs_save_area[2];
if (cr2.gse) {
if (!mci.gs) {
@@ -271,31 +321,26 @@
* It has to be terminated.
*/
kill_task = 1;
+ } else {
+ load_gs_cb((struct gs_cb *)mcesa->guarded_storage_save_area);
}
}
- /* Check if old PSW is valid */
- if (!mci.wp) {
- /*
- * Can't tell if we come from user or kernel mode
- * -> stopping machine.
- */
- s390_handle_damage();
- }
- /* Check for invalid kernel instruction address */
- if (!mci.ia && !umode) {
- /*
- * The instruction address got lost while running
- * in the kernel -> stopping machine.
- */
- s390_handle_damage();
- }
+ /*
+ * The getcpu vdso syscall reads CPU number from the programmable
+ * field of the TOD clock. Disregard the TOD programmable register
+ * validity bit and load the CPU number into the TOD programmable
+ * field unconditionally.
+ */
+ set_tod_programmable_field(raw_smp_processor_id());
+ /* Validate clock comparator register */
+ set_clock_comparator(S390_lowcore.clock_comparator);
if (!mci.ms || !mci.pm || !mci.ia)
kill_task = 1;
return kill_task;
}
-NOKPROBE_SYMBOL(s390_check_registers);
+NOKPROBE_SYMBOL(s390_validate_registers);
/*
* Backup the guest's machine check info to its description block
@@ -353,11 +398,6 @@
mci.val = S390_lowcore.mcck_interruption_code;
mcck = this_cpu_ptr(&cpu_mcck);
- if (mci.sd) {
- /* System damage -> stopping machine */
- s390_handle_damage();
- }
-
/*
* Reinject the instruction processing damages' machine checks
* including Delayed Access Exception into the guest
@@ -398,7 +438,7 @@
s390_handle_damage();
}
}
- if (s390_check_registers(mci, user_mode(regs))) {
+ if (s390_validate_registers(mci, user_mode(regs))) {
/*
* Couldn't restore all register contents for the
* user space process -> mark task for termination.
@@ -428,21 +468,6 @@
mcck_pending = 1;
}
- /*
- * Reinject storage related machine checks into the guest if they
- * happen when the guest is running.
- */
- if (!test_cpu_flag(CIF_MCCK_GUEST)) {
- if (mci.se)
- /* Storage error uncorrected */
- s390_handle_damage();
- if (mci.ke)
- /* Storage key-error uncorrected */
- s390_handle_damage();
- if (mci.ds && mci.fa)
- /* Storage degradation */
- s390_handle_damage();
- }
if (mci.cp) {
/* Channel report word pending */
mcck->channel_report = 1;
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 1b7a052..975a00c 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -2,8 +2,9 @@
/*
* Performance event support for s390x - CPU-measurement Counter Facility
*
- * Copyright IBM Corp. 2012, 2019
+ * Copyright IBM Corp. 2012, 2021
* Author(s): Hendrik Brueckner <brueckner@linux.ibm.com>
+ * Thomas Richter <tmricht@linux.ibm.com>
*/
#define KMSG_COMPONENT "cpum_cf"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
@@ -14,7 +15,223 @@
#include <linux/notifier.h>
#include <linux/init.h>
#include <linux/export.h>
+#include <linux/miscdevice.h>
+
#include <asm/cpu_mcf.h>
+#include <asm/hwctrset.h>
+#include <asm/debug.h>
+
+static unsigned int cfdiag_cpu_speed; /* CPU speed for CF_DIAG trailer */
+static debug_info_t *cf_dbg;
+
+#define CF_DIAG_CTRSET_DEF 0xfeef /* Counter set header mark */
+ /* interval in seconds */
+
+/* Counter sets are stored as data stream in a page sized memory buffer and
+ * exported to user space via raw data attached to the event sample data.
+ * Each counter set starts with an eight byte header consisting of:
+ * - a two byte eye catcher (0xfeef)
+ * - a one byte counter set number
+ * - a two byte counter set size (indicates the number of counters in this set)
+ * - a three byte reserved value (must be zero) to make the header the same
+ * size as a counter value.
+ * All counter values are eight byte in size.
+ *
+ * All counter sets are followed by a 64 byte trailer.
+ * The trailer consists of a:
+ * - flag field indicating valid fields when corresponding bit set
+ * - the counter facility first and second version number
+ * - the CPU speed if nonzero
+ * - the time stamp the counter sets have been collected
+ * - the time of day (TOD) base value
+ * - the machine type.
+ *
+ * The counter sets are saved when the process is prepared to be executed on a
+ * CPU and saved again when the process is going to be removed from a CPU.
+ * The difference of both counter sets are calculated and stored in the event
+ * sample data area.
+ */
+struct cf_ctrset_entry { /* CPU-M CF counter set entry (8 byte) */
+ unsigned int def:16; /* 0-15 Data Entry Format */
+ unsigned int set:16; /* 16-31 Counter set identifier */
+ unsigned int ctr:16; /* 32-47 Number of stored counters */
+ unsigned int res1:16; /* 48-63 Reserved */
+};
+
+struct cf_trailer_entry { /* CPU-M CF_DIAG trailer (64 byte) */
+ /* 0 - 7 */
+ union {
+ struct {
+ unsigned int clock_base:1; /* TOD clock base set */
+ unsigned int speed:1; /* CPU speed set */
+ /* Measurement alerts */
+ unsigned int mtda:1; /* Loss of MT ctr. data alert */
+ unsigned int caca:1; /* Counter auth. change alert */
+ unsigned int lcda:1; /* Loss of counter data alert */
+ };
+ unsigned long flags; /* 0-63 All indicators */
+ };
+ /* 8 - 15 */
+ unsigned int cfvn:16; /* 64-79 Ctr First Version */
+ unsigned int csvn:16; /* 80-95 Ctr Second Version */
+ unsigned int cpu_speed:32; /* 96-127 CPU speed */
+ /* 16 - 23 */
+ unsigned long timestamp; /* 128-191 Timestamp (TOD) */
+ /* 24 - 55 */
+ union {
+ struct {
+ unsigned long progusage1;
+ unsigned long progusage2;
+ unsigned long progusage3;
+ unsigned long tod_base;
+ };
+ unsigned long progusage[4];
+ };
+ /* 56 - 63 */
+ unsigned int mach_type:16; /* Machine type */
+ unsigned int res1:16; /* Reserved */
+ unsigned int res2:32; /* Reserved */
+};
+
+/* Create the trailer data at the end of a page. */
+static void cfdiag_trailer(struct cf_trailer_entry *te)
+{
+ struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
+ struct cpuid cpuid;
+
+ te->cfvn = cpuhw->info.cfvn; /* Counter version numbers */
+ te->csvn = cpuhw->info.csvn;
+
+ get_cpu_id(&cpuid); /* Machine type */
+ te->mach_type = cpuid.machine;
+ te->cpu_speed = cfdiag_cpu_speed;
+ if (te->cpu_speed)
+ te->speed = 1;
+ te->clock_base = 1; /* Save clock base */
+ te->tod_base = tod_clock_base.tod;
+ te->timestamp = get_tod_clock_fast();
+}
+
+/* Read a counter set. The counter set number determines the counter set and
+ * the CPUM-CF first and second version number determine the number of
+ * available counters in each counter set.
+ * Each counter set starts with header containing the counter set number and
+ * the number of eight byte counters.
+ *
+ * The functions returns the number of bytes occupied by this counter set
+ * including the header.
+ * If there is no counter in the counter set, this counter set is useless and
+ * zero is returned on this case.
+ *
+ * Note that the counter sets may not be enabled or active and the stcctm
+ * instruction might return error 3. Depending on error_ok value this is ok,
+ * for example when called from cpumf_pmu_start() call back function.
+ */
+static size_t cfdiag_getctrset(struct cf_ctrset_entry *ctrdata, int ctrset,
+ size_t room, bool error_ok)
+{
+ struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
+ size_t ctrset_size, need = 0;
+ int rc = 3; /* Assume write failure */
+
+ ctrdata->def = CF_DIAG_CTRSET_DEF;
+ ctrdata->set = ctrset;
+ ctrdata->res1 = 0;
+ ctrset_size = cpum_cf_ctrset_size(ctrset, &cpuhw->info);
+
+ if (ctrset_size) { /* Save data */
+ need = ctrset_size * sizeof(u64) + sizeof(*ctrdata);
+ if (need <= room) {
+ rc = ctr_stcctm(ctrset, ctrset_size,
+ (u64 *)(ctrdata + 1));
+ }
+ if (rc != 3 || error_ok)
+ ctrdata->ctr = ctrset_size;
+ else
+ need = 0;
+ }
+
+ debug_sprintf_event(cf_dbg, 3,
+ "%s ctrset %d ctrset_size %zu cfvn %d csvn %d"
+ " need %zd rc %d\n", __func__, ctrset, ctrset_size,
+ cpuhw->info.cfvn, cpuhw->info.csvn, need, rc);
+ return need;
+}
+
+/* Read out all counter sets and save them in the provided data buffer.
+ * The last 64 byte host an artificial trailer entry.
+ */
+static size_t cfdiag_getctr(void *data, size_t sz, unsigned long auth,
+ bool error_ok)
+{
+ struct cf_trailer_entry *trailer;
+ size_t offset = 0, done;
+ int i;
+
+ memset(data, 0, sz);
+ sz -= sizeof(*trailer); /* Always room for trailer */
+ for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
+ struct cf_ctrset_entry *ctrdata = data + offset;
+
+ if (!(auth & cpumf_ctr_ctl[i]))
+ continue; /* Counter set not authorized */
+
+ done = cfdiag_getctrset(ctrdata, i, sz - offset, error_ok);
+ offset += done;
+ }
+ trailer = data + offset;
+ cfdiag_trailer(trailer);
+ return offset + sizeof(*trailer);
+}
+
+/* Calculate the difference for each counter in a counter set. */
+static void cfdiag_diffctrset(u64 *pstart, u64 *pstop, int counters)
+{
+ for (; --counters >= 0; ++pstart, ++pstop)
+ if (*pstop >= *pstart)
+ *pstop -= *pstart;
+ else
+ *pstop = *pstart - *pstop + 1;
+}
+
+/* Scan the counter sets and calculate the difference of each counter
+ * in each set. The result is the increment of each counter during the
+ * period the counter set has been activated.
+ *
+ * Return true on success.
+ */
+static int cfdiag_diffctr(struct cpu_cf_events *cpuhw, unsigned long auth)
+{
+ struct cf_trailer_entry *trailer_start, *trailer_stop;
+ struct cf_ctrset_entry *ctrstart, *ctrstop;
+ size_t offset = 0;
+
+ auth &= (1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1;
+ do {
+ ctrstart = (struct cf_ctrset_entry *)(cpuhw->start + offset);
+ ctrstop = (struct cf_ctrset_entry *)(cpuhw->stop + offset);
+
+ if (memcmp(ctrstop, ctrstart, sizeof(*ctrstop))) {
+ pr_err_once("cpum_cf_diag counter set compare error "
+ "in set %i\n", ctrstart->set);
+ return 0;
+ }
+ auth &= ~cpumf_ctr_ctl[ctrstart->set];
+ if (ctrstart->def == CF_DIAG_CTRSET_DEF) {
+ cfdiag_diffctrset((u64 *)(ctrstart + 1),
+ (u64 *)(ctrstop + 1), ctrstart->ctr);
+ offset += ctrstart->ctr * sizeof(u64) +
+ sizeof(*ctrstart);
+ }
+ } while (ctrstart->def && auth);
+
+ /* Save time_stamp from start of event in stop's trailer */
+ trailer_start = (struct cf_trailer_entry *)(cpuhw->start + offset);
+ trailer_stop = (struct cf_trailer_entry *)(cpuhw->stop + offset);
+ trailer_stop->progusage[0] = trailer_start->timestamp;
+
+ return 1;
+}
static enum cpumf_ctr_set get_counter_set(u64 event)
{
@@ -34,7 +251,8 @@
return set;
}
-static int validate_ctr_version(const struct hw_perf_event *hwc)
+static int validate_ctr_version(const struct hw_perf_event *hwc,
+ enum cpumf_ctr_set set)
{
struct cpu_cf_events *cpuhw;
int err = 0;
@@ -43,7 +261,7 @@
cpuhw = &get_cpu_var(cpu_cf_events);
/* check required version for counter sets */
- switch (hwc->config_base) {
+ switch (set) {
case CPUMF_CTR_SET_BASIC:
case CPUMF_CTR_SET_USER:
if (cpuhw->info.cfvn < 1)
@@ -86,6 +304,8 @@
(cpuhw->info.act_ctl & mtdiag_ctl)))
err = -EOPNOTSUPP;
break;
+ case CPUMF_CTR_SET_MAX:
+ err = -EOPNOTSUPP;
}
put_cpu_var(cpu_cf_events);
@@ -95,7 +315,6 @@
static int validate_ctr_auth(const struct hw_perf_event *hwc)
{
struct cpu_cf_events *cpuhw;
- u64 ctrs_state;
int err = 0;
cpuhw = &get_cpu_var(cpu_cf_events);
@@ -105,8 +324,7 @@
* return with -ENOENT in order to fall back to other
* PMUs that might suffice the event request.
*/
- ctrs_state = cpumf_ctr_ctl[hwc->config_base];
- if (!(ctrs_state & cpuhw->info.auth_ctl))
+ if (!(hwc->config_base & cpuhw->info.auth_ctl))
err = -ENOENT;
put_cpu_var(cpu_cf_events);
@@ -126,7 +344,7 @@
if (cpuhw->flags & PMU_F_ENABLED)
return;
- err = lcctl(cpuhw->state);
+ err = lcctl(cpuhw->state | cpuhw->dev_state);
if (err) {
pr_err("Enabling the performance measuring unit "
"failed with rc=%x\n", err);
@@ -151,6 +369,7 @@
return;
inactive = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1);
+ inactive |= cpuhw->dev_state;
err = lcctl(inactive);
if (err) {
pr_err("Disabling the performance measuring unit "
@@ -199,6 +418,14 @@
[PERF_COUNT_HW_BUS_CYCLES] = -1,
};
+static void cpumf_hw_inuse(void)
+{
+ mutex_lock(&pmc_reserve_mutex);
+ if (atomic_inc_return(&num_events) == 1)
+ __kernel_cpumcf_begin();
+ mutex_unlock(&pmc_reserve_mutex);
+}
+
static int __hw_perf_event_init(struct perf_event *event, unsigned int type)
{
struct perf_event_attr *attr = &event->attr;
@@ -258,11 +485,11 @@
/*
* Use the hardware perf event structure to store the
* counter number in the 'config' member and the counter
- * set number in the 'config_base'. The counter set number
- * is then later used to enable/disable the counter(s).
+ * set number in the 'config_base' as bit mask.
+ * It is later used to enable/disable the counter(s).
*/
hwc->config = ev;
- hwc->config_base = set;
+ hwc->config_base = cpumf_ctr_ctl[set];
break;
case CPUMF_CTR_SET_MAX:
/* The counter could not be associated to a counter set */
@@ -270,22 +497,13 @@
}
/* Initialize for using the CPU-measurement counter facility */
- if (!atomic_inc_not_zero(&num_events)) {
- mutex_lock(&pmc_reserve_mutex);
- if (atomic_read(&num_events) == 0 && __kernel_cpumcf_begin())
- err = -EBUSY;
- else
- atomic_inc(&num_events);
- mutex_unlock(&pmc_reserve_mutex);
- }
- if (err)
- return err;
+ cpumf_hw_inuse();
event->destroy = hw_perf_event_destroy;
/* Finally, validate version and authorization of the counter set */
err = validate_ctr_auth(hwc);
if (!err)
- err = validate_ctr_version(hwc);
+ err = validate_ctr_version(hwc, set);
return err;
}
@@ -361,6 +579,7 @@
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
struct hw_perf_event *hwc = &event->hw;
+ int i;
if (!(hwc->state & PERF_HES_STOPPED))
return;
@@ -376,29 +595,92 @@
* needs to be synchronized. At this point, the counter set can be in
* the inactive or disabled state.
*/
- hw_perf_event_reset(event);
+ if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) {
+ cpuhw->usedss = cfdiag_getctr(cpuhw->start,
+ sizeof(cpuhw->start),
+ hwc->config_base, true);
+ } else {
+ hw_perf_event_reset(event);
+ }
- /* increment refcount for this counter set */
- atomic_inc(&cpuhw->ctr_set[hwc->config_base]);
+ /* Increment refcount for counter sets */
+ for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i)
+ if ((hwc->config_base & cpumf_ctr_ctl[i]))
+ atomic_inc(&cpuhw->ctr_set[i]);
+}
+
+/* Create perf event sample with the counter sets as raw data. The sample
+ * is then pushed to the event subsystem and the function checks for
+ * possible event overflows. If an event overflow occurs, the PMU is
+ * stopped.
+ *
+ * Return non-zero if an event overflow occurred.
+ */
+static int cfdiag_push_sample(struct perf_event *event,
+ struct cpu_cf_events *cpuhw)
+{
+ struct perf_sample_data data;
+ struct perf_raw_record raw;
+ struct pt_regs regs;
+ int overflow;
+
+ /* Setup perf sample */
+ perf_sample_data_init(&data, 0, event->hw.last_period);
+ memset(®s, 0, sizeof(regs));
+ memset(&raw, 0, sizeof(raw));
+
+ if (event->attr.sample_type & PERF_SAMPLE_CPU)
+ data.cpu_entry.cpu = event->cpu;
+ if (event->attr.sample_type & PERF_SAMPLE_RAW) {
+ raw.frag.size = cpuhw->usedss;
+ raw.frag.data = cpuhw->stop;
+ raw.size = raw.frag.size;
+ data.raw = &raw;
+ }
+
+ overflow = perf_event_overflow(event, &data, ®s);
+ debug_sprintf_event(cf_dbg, 3,
+ "%s event %#llx sample_type %#llx raw %d ov %d\n",
+ __func__, event->hw.config,
+ event->attr.sample_type, raw.size, overflow);
+ if (overflow)
+ event->pmu->stop(event, 0);
+
+ perf_event_update_userpage(event);
+ return overflow;
}
static void cpumf_pmu_stop(struct perf_event *event, int flags)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
struct hw_perf_event *hwc = &event->hw;
+ int i;
if (!(hwc->state & PERF_HES_STOPPED)) {
/* Decrement reference count for this counter set and if this
* is the last used counter in the set, clear activation
* control and set the counter set state to inactive.
*/
- if (!atomic_dec_return(&cpuhw->ctr_set[hwc->config_base]))
- ctr_set_stop(&cpuhw->state, hwc->config_base);
+ for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
+ if (!(hwc->config_base & cpumf_ctr_ctl[i]))
+ continue;
+ if (!atomic_dec_return(&cpuhw->ctr_set[i]))
+ ctr_set_stop(&cpuhw->state, cpumf_ctr_ctl[i]);
+ }
hwc->state |= PERF_HES_STOPPED;
}
if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
- hw_perf_event_update(event);
+ if (hwc->config == PERF_EVENT_CPUM_CF_DIAG) {
+ local64_inc(&event->count);
+ cpuhw->usedss = cfdiag_getctr(cpuhw->stop,
+ sizeof(cpuhw->stop),
+ event->hw.config_base,
+ false);
+ if (cfdiag_diffctr(cpuhw, event->hw.config_base))
+ cfdiag_push_sample(event, cpuhw);
+ } else
+ hw_perf_event_update(event);
hwc->state |= PERF_HES_UPTODATE;
}
}
@@ -419,6 +701,7 @@
static void cpumf_pmu_del(struct perf_event *event, int flags)
{
struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
+ int i;
cpumf_pmu_stop(event, PERF_EF_UPDATE);
@@ -430,8 +713,9 @@
* clear enable control and resets all counters in a set. Therefore,
* cpumf_pmu_start() always has to reenable a counter set.
*/
- if (!atomic_read(&cpuhw->ctr_set[event->hw.config_base]))
- ctr_set_disable(&cpuhw->state, event->hw.config_base);
+ for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i)
+ if (!atomic_read(&cpuhw->ctr_set[i]))
+ ctr_set_disable(&cpuhw->state, cpumf_ctr_ctl[i]);
}
/* Performance monitoring unit for s390x */
@@ -448,6 +732,7 @@
.read = cpumf_pmu_read,
};
+static int cfset_init(void);
static int __init cpumf_pmu_init(void)
{
int rc;
@@ -455,10 +740,689 @@
if (!kernel_cpumcf_avail())
return -ENODEV;
+ /* Setup s390dbf facility */
+ cf_dbg = debug_register(KMSG_COMPONENT, 2, 1, 128);
+ if (!cf_dbg) {
+ pr_err("Registration of s390dbf(cpum_cf) failed\n");
+ return -ENOMEM;
+ };
+ debug_register_view(cf_dbg, &debug_sprintf_view);
+
cpumf_pmu.attr_groups = cpumf_cf_event_group();
rc = perf_pmu_register(&cpumf_pmu, "cpum_cf", -1);
- if (rc)
+ if (rc) {
+ debug_unregister_view(cf_dbg, &debug_sprintf_view);
+ debug_unregister(cf_dbg);
pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc);
+ } else if (stccm_avail()) { /* Setup counter set device */
+ cfset_init();
+ }
return rc;
}
-subsys_initcall(cpumf_pmu_init);
+
+/* Support for the CPU Measurement Facility counter set extraction using
+ * device /dev/hwctr. This allows user space programs to extract complete
+ * counter set via normal file operations.
+ */
+
+static atomic_t cfset_opencnt = ATOMIC_INIT(0); /* Excl. access */
+static DEFINE_MUTEX(cfset_ctrset_mutex);/* Synchronize access to hardware */
+struct cfset_call_on_cpu_parm { /* Parm struct for smp_call_on_cpu */
+ unsigned int sets; /* Counter set bit mask */
+ atomic_t cpus_ack; /* # CPUs successfully executed func */
+};
+
+static struct cfset_request { /* CPUs and counter set bit mask */
+ unsigned long ctrset; /* Bit mask of counter set to read */
+ cpumask_t mask; /* CPU mask to read from */
+} cfset_request;
+
+static void cfset_ctrset_clear(void)
+{
+ cpumask_clear(&cfset_request.mask);
+ cfset_request.ctrset = 0;
+}
+
+/* The /dev/hwctr device access uses PMU_F_IN_USE to mark the device access
+ * path is currently used.
+ * The cpu_cf_events::dev_state is used to denote counter sets in use by this
+ * interface. It is always or'ed in. If this interface is not active, its
+ * value is zero and no additional counter sets will be included.
+ *
+ * The cpu_cf_events::state is used by the perf_event_open SVC and remains
+ * unchanged.
+ *
+ * perf_pmu_enable() and perf_pmu_enable() and its call backs
+ * cpumf_pmu_enable() and cpumf_pmu_disable() are called by the
+ * performance measurement subsystem to enable per process
+ * CPU Measurement counter facility.
+ * The XXX_enable() and XXX_disable functions are used to turn off
+ * x86 performance monitoring interrupt (PMI) during scheduling.
+ * s390 uses these calls to temporarily stop and resume the active CPU
+ * counters sets during scheduling.
+ *
+ * We do allow concurrent access of perf_event_open() SVC and /dev/hwctr
+ * device access. The perf_event_open() SVC interface makes a lot of effort
+ * to only run the counters while the calling process is actively scheduled
+ * to run.
+ * When /dev/hwctr interface is also used at the same time, the counter sets
+ * will keep running, even when the process is scheduled off a CPU.
+ * However this is not a problem and does not lead to wrong counter values
+ * for the perf_event_open() SVC. The current counter value will be recorded
+ * during schedule-in. At schedule-out time the current counter value is
+ * extracted again and the delta is calculated and added to the event.
+ */
+/* Stop all counter sets via ioctl interface */
+static void cfset_ioctl_off(void *parm)
+{
+ struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
+ struct cfset_call_on_cpu_parm *p = parm;
+ int rc;
+
+ cpuhw->dev_state = 0;
+ for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc)
+ if ((p->sets & cpumf_ctr_ctl[rc]))
+ atomic_dec(&cpuhw->ctr_set[rc]);
+ rc = lcctl(cpuhw->state); /* Keep perf_event_open counter sets */
+ if (rc)
+ pr_err("Counter set stop %#llx of /dev/%s failed rc=%i\n",
+ cpuhw->state, S390_HWCTR_DEVICE, rc);
+ cpuhw->flags &= ~PMU_F_IN_USE;
+ debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n",
+ __func__, rc, cpuhw->state, cpuhw->dev_state);
+}
+
+/* Start counter sets on particular CPU */
+static void cfset_ioctl_on(void *parm)
+{
+ struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
+ struct cfset_call_on_cpu_parm *p = parm;
+ int rc;
+
+ cpuhw->flags |= PMU_F_IN_USE;
+ ctr_set_enable(&cpuhw->dev_state, p->sets);
+ ctr_set_start(&cpuhw->dev_state, p->sets);
+ for (rc = CPUMF_CTR_SET_BASIC; rc < CPUMF_CTR_SET_MAX; ++rc)
+ if ((p->sets & cpumf_ctr_ctl[rc]))
+ atomic_inc(&cpuhw->ctr_set[rc]);
+ rc = lcctl(cpuhw->dev_state | cpuhw->state); /* Start counter sets */
+ if (!rc)
+ atomic_inc(&p->cpus_ack);
+ else
+ pr_err("Counter set start %#llx of /dev/%s failed rc=%i\n",
+ cpuhw->dev_state | cpuhw->state, S390_HWCTR_DEVICE, rc);
+ debug_sprintf_event(cf_dbg, 4, "%s rc %d state %#llx dev_state %#llx\n",
+ __func__, rc, cpuhw->state, cpuhw->dev_state);
+}
+
+static void cfset_release_cpu(void *p)
+{
+ struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
+ int rc;
+
+ debug_sprintf_event(cf_dbg, 4, "%s state %#llx dev_state %#llx\n",
+ __func__, cpuhw->state, cpuhw->dev_state);
+ rc = lcctl(cpuhw->state); /* Keep perf_event_open counter sets */
+ if (rc)
+ pr_err("Counter set release %#llx of /dev/%s failed rc=%i\n",
+ cpuhw->state, S390_HWCTR_DEVICE, rc);
+ cpuhw->dev_state = 0;
+}
+
+/* Release function is also called when application gets terminated without
+ * doing a proper ioctl(..., S390_HWCTR_STOP, ...) command.
+ */
+static int cfset_release(struct inode *inode, struct file *file)
+{
+ on_each_cpu(cfset_release_cpu, NULL, 1);
+ hw_perf_event_destroy(NULL);
+ cfset_ctrset_clear();
+ atomic_set(&cfset_opencnt, 0);
+ return 0;
+}
+
+static int cfset_open(struct inode *inode, struct file *file)
+{
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ /* Only one user space program can open /dev/hwctr */
+ if (atomic_xchg(&cfset_opencnt, 1))
+ return -EBUSY;
+
+ cpumf_hw_inuse();
+ file->private_data = NULL;
+ /* nonseekable_open() never fails */
+ return nonseekable_open(inode, file);
+}
+
+static int cfset_all_stop(void)
+{
+ struct cfset_call_on_cpu_parm p = {
+ .sets = cfset_request.ctrset,
+ };
+ cpumask_var_t mask;
+
+ if (!alloc_cpumask_var(&mask, GFP_KERNEL))
+ return -ENOMEM;
+ cpumask_and(mask, &cfset_request.mask, cpu_online_mask);
+ on_each_cpu_mask(mask, cfset_ioctl_off, &p, 1);
+ free_cpumask_var(mask);
+ return 0;
+}
+
+static int cfset_all_start(void)
+{
+ struct cfset_call_on_cpu_parm p = {
+ .sets = cfset_request.ctrset,
+ .cpus_ack = ATOMIC_INIT(0),
+ };
+ cpumask_var_t mask;
+ int rc = 0;
+
+ if (!alloc_cpumask_var(&mask, GFP_KERNEL))
+ return -ENOMEM;
+ cpumask_and(mask, &cfset_request.mask, cpu_online_mask);
+ on_each_cpu_mask(mask, cfset_ioctl_on, &p, 1);
+ if (atomic_read(&p.cpus_ack) != cpumask_weight(mask)) {
+ on_each_cpu_mask(mask, cfset_ioctl_off, &p, 1);
+ rc = -EIO;
+ debug_sprintf_event(cf_dbg, 4, "%s CPUs missing", __func__);
+ }
+ free_cpumask_var(mask);
+ return rc;
+}
+
+
+/* Return the maximum required space for all possible CPUs in case one
+ * CPU will be onlined during the START, READ, STOP cycles.
+ * To find out the size of the counter sets, any one CPU will do. They
+ * all have the same counter sets.
+ */
+static size_t cfset_needspace(unsigned int sets)
+{
+ struct cpu_cf_events *cpuhw = get_cpu_ptr(&cpu_cf_events);
+ size_t bytes = 0;
+ int i;
+
+ for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
+ if (!(sets & cpumf_ctr_ctl[i]))
+ continue;
+ bytes += cpum_cf_ctrset_size(i, &cpuhw->info) * sizeof(u64) +
+ sizeof(((struct s390_ctrset_setdata *)0)->set) +
+ sizeof(((struct s390_ctrset_setdata *)0)->no_cnts);
+ }
+ bytes = sizeof(((struct s390_ctrset_read *)0)->no_cpus) + nr_cpu_ids *
+ (bytes + sizeof(((struct s390_ctrset_cpudata *)0)->cpu_nr) +
+ sizeof(((struct s390_ctrset_cpudata *)0)->no_sets));
+ put_cpu_ptr(&cpu_cf_events);
+ return bytes;
+}
+
+static int cfset_all_copy(unsigned long arg, cpumask_t *mask)
+{
+ struct s390_ctrset_read __user *ctrset_read;
+ unsigned int cpu, cpus, rc;
+ void __user *uptr;
+
+ ctrset_read = (struct s390_ctrset_read __user *)arg;
+ uptr = ctrset_read->data;
+ for_each_cpu(cpu, mask) {
+ struct cpu_cf_events *cpuhw = per_cpu_ptr(&cpu_cf_events, cpu);
+ struct s390_ctrset_cpudata __user *ctrset_cpudata;
+
+ ctrset_cpudata = uptr;
+ rc = put_user(cpu, &ctrset_cpudata->cpu_nr);
+ rc |= put_user(cpuhw->sets, &ctrset_cpudata->no_sets);
+ rc |= copy_to_user(ctrset_cpudata->data, cpuhw->data,
+ cpuhw->used);
+ if (rc)
+ return -EFAULT;
+ uptr += sizeof(struct s390_ctrset_cpudata) + cpuhw->used;
+ cond_resched();
+ }
+ cpus = cpumask_weight(mask);
+ if (put_user(cpus, &ctrset_read->no_cpus))
+ return -EFAULT;
+ debug_sprintf_event(cf_dbg, 4, "%s copied %ld\n", __func__,
+ uptr - (void __user *)ctrset_read->data);
+ return 0;
+}
+
+static size_t cfset_cpuset_read(struct s390_ctrset_setdata *p, int ctrset,
+ int ctrset_size, size_t room)
+{
+ size_t need = 0;
+ int rc = -1;
+
+ need = sizeof(*p) + sizeof(u64) * ctrset_size;
+ if (need <= room) {
+ p->set = cpumf_ctr_ctl[ctrset];
+ p->no_cnts = ctrset_size;
+ rc = ctr_stcctm(ctrset, ctrset_size, (u64 *)p->cv);
+ if (rc == 3) /* Nothing stored */
+ need = 0;
+ }
+ return need;
+}
+
+/* Read all counter sets. */
+static void cfset_cpu_read(void *parm)
+{
+ struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
+ struct cfset_call_on_cpu_parm *p = parm;
+ int set, set_size;
+ size_t space;
+
+ /* No data saved yet */
+ cpuhw->used = 0;
+ cpuhw->sets = 0;
+ memset(cpuhw->data, 0, sizeof(cpuhw->data));
+
+ /* Scan the counter sets */
+ for (set = CPUMF_CTR_SET_BASIC; set < CPUMF_CTR_SET_MAX; ++set) {
+ struct s390_ctrset_setdata *sp = (void *)cpuhw->data +
+ cpuhw->used;
+
+ if (!(p->sets & cpumf_ctr_ctl[set]))
+ continue; /* Counter set not in list */
+ set_size = cpum_cf_ctrset_size(set, &cpuhw->info);
+ space = sizeof(cpuhw->data) - cpuhw->used;
+ space = cfset_cpuset_read(sp, set, set_size, space);
+ if (space) {
+ cpuhw->used += space;
+ cpuhw->sets += 1;
+ }
+ }
+ debug_sprintf_event(cf_dbg, 4, "%s sets %d used %zd\n", __func__,
+ cpuhw->sets, cpuhw->used);
+}
+
+static int cfset_all_read(unsigned long arg)
+{
+ struct cfset_call_on_cpu_parm p;
+ cpumask_var_t mask;
+ int rc;
+
+ if (!alloc_cpumask_var(&mask, GFP_KERNEL))
+ return -ENOMEM;
+
+ p.sets = cfset_request.ctrset;
+ cpumask_and(mask, &cfset_request.mask, cpu_online_mask);
+ on_each_cpu_mask(mask, cfset_cpu_read, &p, 1);
+ rc = cfset_all_copy(arg, mask);
+ free_cpumask_var(mask);
+ return rc;
+}
+
+static long cfset_ioctl_read(unsigned long arg)
+{
+ struct s390_ctrset_read read;
+ int ret = 0;
+
+ if (copy_from_user(&read, (char __user *)arg, sizeof(read)))
+ return -EFAULT;
+ ret = cfset_all_read(arg);
+ return ret;
+}
+
+static long cfset_ioctl_stop(void)
+{
+ int ret = ENXIO;
+
+ if (cfset_request.ctrset) {
+ ret = cfset_all_stop();
+ cfset_ctrset_clear();
+ }
+ return ret;
+}
+
+static long cfset_ioctl_start(unsigned long arg)
+{
+ struct s390_ctrset_start __user *ustart;
+ struct s390_ctrset_start start;
+ void __user *umask;
+ unsigned int len;
+ int ret = 0;
+ size_t need;
+
+ if (cfset_request.ctrset)
+ return -EBUSY;
+ ustart = (struct s390_ctrset_start __user *)arg;
+ if (copy_from_user(&start, ustart, sizeof(start)))
+ return -EFAULT;
+ if (start.version != S390_HWCTR_START_VERSION)
+ return -EINVAL;
+ if (start.counter_sets & ~(cpumf_ctr_ctl[CPUMF_CTR_SET_BASIC] |
+ cpumf_ctr_ctl[CPUMF_CTR_SET_USER] |
+ cpumf_ctr_ctl[CPUMF_CTR_SET_CRYPTO] |
+ cpumf_ctr_ctl[CPUMF_CTR_SET_EXT] |
+ cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG]))
+ return -EINVAL; /* Invalid counter set */
+ if (!start.counter_sets)
+ return -EINVAL; /* No counter set at all? */
+ cpumask_clear(&cfset_request.mask);
+ len = min_t(u64, start.cpumask_len, cpumask_size());
+ umask = (void __user *)start.cpumask;
+ if (copy_from_user(&cfset_request.mask, umask, len))
+ return -EFAULT;
+ if (cpumask_empty(&cfset_request.mask))
+ return -EINVAL;
+ need = cfset_needspace(start.counter_sets);
+ if (put_user(need, &ustart->data_bytes))
+ ret = -EFAULT;
+ if (ret)
+ goto out;
+ cfset_request.ctrset = start.counter_sets;
+ ret = cfset_all_start();
+out:
+ if (ret)
+ cfset_ctrset_clear();
+ debug_sprintf_event(cf_dbg, 4, "%s sets %#lx need %ld ret %d\n",
+ __func__, cfset_request.ctrset, need, ret);
+ return ret;
+}
+
+/* Entry point to the /dev/hwctr device interface.
+ * The ioctl system call supports three subcommands:
+ * S390_HWCTR_START: Start the specified counter sets on a CPU list. The
+ * counter set keeps running until explicitly stopped. Returns the number
+ * of bytes needed to store the counter values. If another S390_HWCTR_START
+ * ioctl subcommand is called without a previous S390_HWCTR_STOP stop
+ * command, -EBUSY is returned.
+ * S390_HWCTR_READ: Read the counter set values from specified CPU list given
+ * with the S390_HWCTR_START command.
+ * S390_HWCTR_STOP: Stops the counter sets on the CPU list given with the
+ * previous S390_HWCTR_START subcommand.
+ */
+static long cfset_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ int ret;
+
+ get_online_cpus();
+ mutex_lock(&cfset_ctrset_mutex);
+ switch (cmd) {
+ case S390_HWCTR_START:
+ ret = cfset_ioctl_start(arg);
+ break;
+ case S390_HWCTR_STOP:
+ ret = cfset_ioctl_stop();
+ break;
+ case S390_HWCTR_READ:
+ ret = cfset_ioctl_read(arg);
+ break;
+ default:
+ ret = -ENOTTY;
+ break;
+ }
+ mutex_unlock(&cfset_ctrset_mutex);
+ put_online_cpus();
+ return ret;
+}
+
+static const struct file_operations cfset_fops = {
+ .owner = THIS_MODULE,
+ .open = cfset_open,
+ .release = cfset_release,
+ .unlocked_ioctl = cfset_ioctl,
+ .compat_ioctl = cfset_ioctl,
+ .llseek = no_llseek
+};
+
+static struct miscdevice cfset_dev = {
+ .name = S390_HWCTR_DEVICE,
+ .minor = MISC_DYNAMIC_MINOR,
+ .fops = &cfset_fops,
+};
+
+int cfset_online_cpu(unsigned int cpu)
+{
+ struct cfset_call_on_cpu_parm p;
+
+ mutex_lock(&cfset_ctrset_mutex);
+ if (cfset_request.ctrset) {
+ p.sets = cfset_request.ctrset;
+ cfset_ioctl_on(&p);
+ cpumask_set_cpu(cpu, &cfset_request.mask);
+ }
+ mutex_unlock(&cfset_ctrset_mutex);
+ return 0;
+}
+
+int cfset_offline_cpu(unsigned int cpu)
+{
+ struct cfset_call_on_cpu_parm p;
+
+ mutex_lock(&cfset_ctrset_mutex);
+ if (cfset_request.ctrset) {
+ p.sets = cfset_request.ctrset;
+ cfset_ioctl_off(&p);
+ cpumask_clear_cpu(cpu, &cfset_request.mask);
+ }
+ mutex_unlock(&cfset_ctrset_mutex);
+ return 0;
+}
+
+static void cfdiag_read(struct perf_event *event)
+{
+ debug_sprintf_event(cf_dbg, 3, "%s event %#llx count %ld\n", __func__,
+ event->attr.config, local64_read(&event->count));
+}
+
+static int get_authctrsets(void)
+{
+ struct cpu_cf_events *cpuhw;
+ unsigned long auth = 0;
+ enum cpumf_ctr_set i;
+
+ cpuhw = &get_cpu_var(cpu_cf_events);
+ for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
+ if (cpuhw->info.auth_ctl & cpumf_ctr_ctl[i])
+ auth |= cpumf_ctr_ctl[i];
+ }
+ put_cpu_var(cpu_cf_events);
+ return auth;
+}
+
+/* Setup the event. Test for authorized counter sets and only include counter
+ * sets which are authorized at the time of the setup. Including unauthorized
+ * counter sets result in specification exception (and panic).
+ */
+static int cfdiag_event_init2(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ int err = 0;
+
+ /* Set sample_period to indicate sampling */
+ event->hw.config = attr->config;
+ event->hw.sample_period = attr->sample_period;
+ local64_set(&event->hw.period_left, event->hw.sample_period);
+ local64_set(&event->count, 0);
+ event->hw.last_period = event->hw.sample_period;
+
+ /* Add all authorized counter sets to config_base. The
+ * the hardware init function is either called per-cpu or just once
+ * for all CPUS (event->cpu == -1). This depends on the whether
+ * counting is started for all CPUs or on a per workload base where
+ * the perf event moves from one CPU to another CPU.
+ * Checking the authorization on any CPU is fine as the hardware
+ * applies the same authorization settings to all CPUs.
+ */
+ event->hw.config_base = get_authctrsets();
+
+ /* No authorized counter sets, nothing to count/sample */
+ if (!event->hw.config_base)
+ err = -EINVAL;
+
+ debug_sprintf_event(cf_dbg, 5, "%s err %d config_base %#lx\n",
+ __func__, err, event->hw.config_base);
+ return err;
+}
+
+static int cfdiag_event_init(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ int err = -ENOENT;
+
+ if (event->attr.config != PERF_EVENT_CPUM_CF_DIAG ||
+ event->attr.type != event->pmu->type)
+ goto out;
+
+ /* Raw events are used to access counters directly,
+ * hence do not permit excludes.
+ * This event is useless without PERF_SAMPLE_RAW to return counter set
+ * values as raw data.
+ */
+ if (attr->exclude_kernel || attr->exclude_user || attr->exclude_hv ||
+ !(attr->sample_type & (PERF_SAMPLE_CPU | PERF_SAMPLE_RAW))) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /* Initialize for using the CPU-measurement counter facility */
+ cpumf_hw_inuse();
+ event->destroy = hw_perf_event_destroy;
+
+ err = cfdiag_event_init2(event);
+ if (unlikely(err))
+ event->destroy(event);
+out:
+ return err;
+}
+
+/* Create cf_diag/events/CF_DIAG event sysfs file. This counter is used
+ * to collect the complete counter sets for a scheduled process. Target
+ * are complete counter sets attached as raw data to the artificial event.
+ * This results in complete counter sets available when a process is
+ * scheduled. Contains the delta of every counter while the process was
+ * running.
+ */
+CPUMF_EVENT_ATTR(CF_DIAG, CF_DIAG, PERF_EVENT_CPUM_CF_DIAG);
+
+static struct attribute *cfdiag_events_attr[] = {
+ CPUMF_EVENT_PTR(CF_DIAG, CF_DIAG),
+ NULL,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-63");
+
+static struct attribute *cfdiag_format_attr[] = {
+ &format_attr_event.attr,
+ NULL,
+};
+
+static struct attribute_group cfdiag_events_group = {
+ .name = "events",
+ .attrs = cfdiag_events_attr,
+};
+static struct attribute_group cfdiag_format_group = {
+ .name = "format",
+ .attrs = cfdiag_format_attr,
+};
+static const struct attribute_group *cfdiag_attr_groups[] = {
+ &cfdiag_events_group,
+ &cfdiag_format_group,
+ NULL,
+};
+
+/* Performance monitoring unit for event CF_DIAG. Since this event
+ * is also started and stopped via the perf_event_open() system call, use
+ * the same event enable/disable call back functions. They do not
+ * have a pointer to the perf_event strcture as first parameter.
+ *
+ * The functions XXX_add, XXX_del, XXX_start and XXX_stop are also common.
+ * Reuse them and distinguish the event (always first parameter) via
+ * 'config' member.
+ */
+static struct pmu cf_diag = {
+ .task_ctx_nr = perf_sw_context,
+ .event_init = cfdiag_event_init,
+ .pmu_enable = cpumf_pmu_enable,
+ .pmu_disable = cpumf_pmu_disable,
+ .add = cpumf_pmu_add,
+ .del = cpumf_pmu_del,
+ .start = cpumf_pmu_start,
+ .stop = cpumf_pmu_stop,
+ .read = cfdiag_read,
+
+ .attr_groups = cfdiag_attr_groups
+};
+
+/* Calculate memory needed to store all counter sets together with header and
+ * trailer data. This is independent of the counter set authorization which
+ * can vary depending on the configuration.
+ */
+static size_t cfdiag_maxsize(struct cpumf_ctr_info *info)
+{
+ size_t max_size = sizeof(struct cf_trailer_entry);
+ enum cpumf_ctr_set i;
+
+ for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
+ size_t size = cpum_cf_ctrset_size(i, info);
+
+ if (size)
+ max_size += size * sizeof(u64) +
+ sizeof(struct cf_ctrset_entry);
+ }
+ return max_size;
+}
+
+/* Get the CPU speed, try sampling facility first and CPU attributes second. */
+static void cfdiag_get_cpu_speed(void)
+{
+ if (cpum_sf_avail()) { /* Sampling facility first */
+ struct hws_qsi_info_block si;
+
+ memset(&si, 0, sizeof(si));
+ if (!qsi(&si)) {
+ cfdiag_cpu_speed = si.cpu_speed;
+ return;
+ }
+ }
+
+ /* Fallback: CPU speed extract static part. Used in case
+ * CPU Measurement Sampling Facility is turned off.
+ */
+ if (test_facility(34)) {
+ unsigned long mhz = __ecag(ECAG_CPU_ATTRIBUTE, 0);
+
+ if (mhz != -1UL)
+ cfdiag_cpu_speed = mhz & 0xffffffff;
+ }
+}
+
+static int cfset_init(void)
+{
+ struct cpumf_ctr_info info;
+ size_t need;
+ int rc;
+
+ if (qctri(&info))
+ return -ENODEV;
+
+ cfdiag_get_cpu_speed();
+ /* Make sure the counter set data fits into predefined buffer. */
+ need = cfdiag_maxsize(&info);
+ if (need > sizeof(((struct cpu_cf_events *)0)->start)) {
+ pr_err("Insufficient memory for PMU(cpum_cf_diag) need=%zu\n",
+ need);
+ return -ENOMEM;
+ }
+
+ rc = misc_register(&cfset_dev);
+ if (rc) {
+ pr_err("Registration of /dev/%s failed rc=%i\n",
+ cfset_dev.name, rc);
+ goto out;
+ }
+
+ rc = perf_pmu_register(&cf_diag, "cpum_cf_diag", -1);
+ if (rc) {
+ misc_deregister(&cfset_dev);
+ pr_err("Registration of PMU(cpum_cf_diag) failed with rc=%i\n",
+ rc);
+ }
+out:
+ return rc;
+}
+
+device_initcall(cpumf_pmu_init);
diff --git a/arch/s390/kernel/perf_cpum_cf_common.c b/arch/s390/kernel/perf_cpum_cf_common.c
index 2300fba..30f0242d 100644
--- a/arch/s390/kernel/perf_cpum_cf_common.c
+++ b/arch/s390/kernel/perf_cpum_cf_common.c
@@ -29,7 +29,11 @@
},
.alert = ATOMIC64_INIT(0),
.state = 0,
+ .dev_state = 0,
.flags = 0,
+ .used = 0,
+ .usedss = 0,
+ .sets = 0
};
/* Indicator whether the CPU-Measurement Counter Facility Support is ready */
static bool cpum_cf_initalized;
@@ -96,25 +100,10 @@
}
EXPORT_SYMBOL(kernel_cpumcf_avail);
-
-/* Reserve/release functions for sharing perf hardware */
-static DEFINE_SPINLOCK(cpumcf_owner_lock);
-static void *cpumcf_owner;
-
/* Initialize the CPU-measurement counter facility */
int __kernel_cpumcf_begin(void)
{
int flags = PMC_INIT;
- int err = 0;
-
- spin_lock(&cpumcf_owner_lock);
- if (cpumcf_owner)
- err = -EBUSY;
- else
- cpumcf_owner = __builtin_return_address(0);
- spin_unlock(&cpumcf_owner_lock);
- if (err)
- return err;
on_each_cpu(cpum_cf_setup_cpu, &flags, 1);
irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT);
@@ -144,10 +133,6 @@
on_each_cpu(cpum_cf_setup_cpu, &flags, 1);
irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT);
-
- spin_lock(&cpumcf_owner_lock);
- cpumcf_owner = NULL;
- spin_unlock(&cpumcf_owner_lock);
}
EXPORT_SYMBOL(__kernel_cpumcf_end);
@@ -161,11 +146,13 @@
static int cpum_cf_online_cpu(unsigned int cpu)
{
- return cpum_cf_setup(cpu, PMC_INIT);
+ cpum_cf_setup(cpu, PMC_INIT);
+ return cfset_online_cpu(cpu);
}
static int cpum_cf_offline_cpu(unsigned int cpu)
{
+ cfset_offline_cpu(cpu);
return cpum_cf_setup(cpu, PMC_RELEASE);
}
diff --git a/arch/s390/kernel/perf_cpum_cf_diag.c b/arch/s390/kernel/perf_cpum_cf_diag.c
deleted file mode 100644
index 08c985c..0000000
--- a/arch/s390/kernel/perf_cpum_cf_diag.c
+++ /dev/null
@@ -1,1148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Performance event support for s390x - CPU-measurement Counter Sets
- *
- * Copyright IBM Corp. 2019, 2021
- * Author(s): Hendrik Brueckner <brueckner@linux.ibm.com>
- * Thomas Richer <tmricht@linux.ibm.com>
- */
-#define KMSG_COMPONENT "cpum_cf_diag"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/percpu.h>
-#include <linux/notifier.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/slab.h>
-#include <linux/processor.h>
-#include <linux/miscdevice.h>
-#include <linux/mutex.h>
-
-#include <asm/ctl_reg.h>
-#include <asm/irq.h>
-#include <asm/cpu_mcf.h>
-#include <asm/timex.h>
-#include <asm/debug.h>
-
-#include <asm/hwctrset.h>
-
-#define CF_DIAG_CTRSET_DEF 0xfeef /* Counter set header mark */
- /* interval in seconds */
-static unsigned int cf_diag_cpu_speed;
-static debug_info_t *cf_diag_dbg;
-
-struct cf_diag_csd { /* Counter set data per CPU */
- size_t used; /* Bytes used in data/start */
- unsigned char start[PAGE_SIZE]; /* Counter set at event start */
- unsigned char data[PAGE_SIZE]; /* Counter set at event delete */
- unsigned int sets; /* # Counter set saved in data */
-};
-static DEFINE_PER_CPU(struct cf_diag_csd, cf_diag_csd);
-
-/* Counter sets are stored as data stream in a page sized memory buffer and
- * exported to user space via raw data attached to the event sample data.
- * Each counter set starts with an eight byte header consisting of:
- * - a two byte eye catcher (0xfeef)
- * - a one byte counter set number
- * - a two byte counter set size (indicates the number of counters in this set)
- * - a three byte reserved value (must be zero) to make the header the same
- * size as a counter value.
- * All counter values are eight byte in size.
- *
- * All counter sets are followed by a 64 byte trailer.
- * The trailer consists of a:
- * - flag field indicating valid fields when corresponding bit set
- * - the counter facility first and second version number
- * - the CPU speed if nonzero
- * - the time stamp the counter sets have been collected
- * - the time of day (TOD) base value
- * - the machine type.
- *
- * The counter sets are saved when the process is prepared to be executed on a
- * CPU and saved again when the process is going to be removed from a CPU.
- * The difference of both counter sets are calculated and stored in the event
- * sample data area.
- */
-
-struct cf_ctrset_entry { /* CPU-M CF counter set entry (8 byte) */
- unsigned int def:16; /* 0-15 Data Entry Format */
- unsigned int set:16; /* 16-31 Counter set identifier */
- unsigned int ctr:16; /* 32-47 Number of stored counters */
- unsigned int res1:16; /* 48-63 Reserved */
-};
-
-struct cf_trailer_entry { /* CPU-M CF_DIAG trailer (64 byte) */
- /* 0 - 7 */
- union {
- struct {
- unsigned int clock_base:1; /* TOD clock base set */
- unsigned int speed:1; /* CPU speed set */
- /* Measurement alerts */
- unsigned int mtda:1; /* Loss of MT ctr. data alert */
- unsigned int caca:1; /* Counter auth. change alert */
- unsigned int lcda:1; /* Loss of counter data alert */
- };
- unsigned long flags; /* 0-63 All indicators */
- };
- /* 8 - 15 */
- unsigned int cfvn:16; /* 64-79 Ctr First Version */
- unsigned int csvn:16; /* 80-95 Ctr Second Version */
- unsigned int cpu_speed:32; /* 96-127 CPU speed */
- /* 16 - 23 */
- unsigned long timestamp; /* 128-191 Timestamp (TOD) */
- /* 24 - 55 */
- union {
- struct {
- unsigned long progusage1;
- unsigned long progusage2;
- unsigned long progusage3;
- unsigned long tod_base;
- };
- unsigned long progusage[4];
- };
- /* 56 - 63 */
- unsigned int mach_type:16; /* Machine type */
- unsigned int res1:16; /* Reserved */
- unsigned int res2:32; /* Reserved */
-};
-
-/* Create the trailer data at the end of a page. */
-static void cf_diag_trailer(struct cf_trailer_entry *te)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- struct cpuid cpuid;
-
- te->cfvn = cpuhw->info.cfvn; /* Counter version numbers */
- te->csvn = cpuhw->info.csvn;
-
- get_cpu_id(&cpuid); /* Machine type */
- te->mach_type = cpuid.machine;
- te->cpu_speed = cf_diag_cpu_speed;
- if (te->cpu_speed)
- te->speed = 1;
- te->clock_base = 1; /* Save clock base */
- te->tod_base = tod_clock_base.tod;
- te->timestamp = get_tod_clock_fast();
-}
-
-/*
- * Change the CPUMF state to active.
- * Enable and activate the CPU-counter sets according
- * to the per-cpu control state.
- */
-static void cf_diag_enable(struct pmu *pmu)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- int err;
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s pmu %p cpu %d flags %#x state %#llx\n",
- __func__, pmu, smp_processor_id(), cpuhw->flags,
- cpuhw->state);
- if (cpuhw->flags & PMU_F_ENABLED)
- return;
-
- err = lcctl(cpuhw->state);
- if (err) {
- pr_err("Enabling the performance measuring unit "
- "failed with rc=%x\n", err);
- return;
- }
- cpuhw->flags |= PMU_F_ENABLED;
-}
-
-/*
- * Change the CPUMF state to inactive.
- * Disable and enable (inactive) the CPU-counter sets according
- * to the per-cpu control state.
- */
-static void cf_diag_disable(struct pmu *pmu)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- u64 inactive;
- int err;
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s pmu %p cpu %d flags %#x state %#llx\n",
- __func__, pmu, smp_processor_id(), cpuhw->flags,
- cpuhw->state);
- if (!(cpuhw->flags & PMU_F_ENABLED))
- return;
-
- inactive = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1);
- err = lcctl(inactive);
- if (err) {
- pr_err("Disabling the performance measuring unit "
- "failed with rc=%x\n", err);
- return;
- }
- cpuhw->flags &= ~PMU_F_ENABLED;
-}
-
-/* Number of perf events counting hardware events */
-static atomic_t cf_diag_events = ATOMIC_INIT(0);
-/* Used to avoid races in calling reserve/release_cpumf_hardware */
-static DEFINE_MUTEX(cf_diag_reserve_mutex);
-
-/* Release the PMU if event is the last perf event */
-static void cf_diag_perf_event_destroy(struct perf_event *event)
-{
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s event %p cpu %d cf_diag_events %d\n",
- __func__, event, smp_processor_id(),
- atomic_read(&cf_diag_events));
- if (atomic_dec_return(&cf_diag_events) == 0)
- __kernel_cpumcf_end();
-}
-
-static int get_authctrsets(void)
-{
- struct cpu_cf_events *cpuhw;
- unsigned long auth = 0;
- enum cpumf_ctr_set i;
-
- cpuhw = &get_cpu_var(cpu_cf_events);
- for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
- if (cpuhw->info.auth_ctl & cpumf_ctr_ctl[i])
- auth |= cpumf_ctr_ctl[i];
- }
- put_cpu_var(cpu_cf_events);
- return auth;
-}
-
-/* Setup the event. Test for authorized counter sets and only include counter
- * sets which are authorized at the time of the setup. Including unauthorized
- * counter sets result in specification exception (and panic).
- */
-static int __hw_perf_event_init(struct perf_event *event)
-{
- struct perf_event_attr *attr = &event->attr;
- int err = 0;
-
- debug_sprintf_event(cf_diag_dbg, 5, "%s event %p cpu %d\n", __func__,
- event, event->cpu);
-
- event->hw.config = attr->config;
-
- /* Add all authorized counter sets to config_base. The
- * the hardware init function is either called per-cpu or just once
- * for all CPUS (event->cpu == -1). This depends on the whether
- * counting is started for all CPUs or on a per workload base where
- * the perf event moves from one CPU to another CPU.
- * Checking the authorization on any CPU is fine as the hardware
- * applies the same authorization settings to all CPUs.
- */
- event->hw.config_base = get_authctrsets();
-
- /* No authorized counter sets, nothing to count/sample */
- if (!event->hw.config_base) {
- err = -EINVAL;
- goto out;
- }
-
- /* Set sample_period to indicate sampling */
- event->hw.sample_period = attr->sample_period;
- local64_set(&event->hw.period_left, event->hw.sample_period);
- event->hw.last_period = event->hw.sample_period;
-out:
- debug_sprintf_event(cf_diag_dbg, 5, "%s err %d config_base %#lx\n",
- __func__, err, event->hw.config_base);
- return err;
-}
-
-/* Return 0 if the CPU-measurement counter facility is currently free
- * and an error otherwise.
- */
-static int cf_diag_perf_event_inuse(void)
-{
- int err = 0;
-
- if (!atomic_inc_not_zero(&cf_diag_events)) {
- mutex_lock(&cf_diag_reserve_mutex);
- if (atomic_read(&cf_diag_events) == 0 &&
- __kernel_cpumcf_begin())
- err = -EBUSY;
- else
- err = atomic_inc_return(&cf_diag_events);
- mutex_unlock(&cf_diag_reserve_mutex);
- }
- return err;
-}
-
-static int cf_diag_event_init(struct perf_event *event)
-{
- struct perf_event_attr *attr = &event->attr;
- int err = -ENOENT;
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s event %p cpu %d config %#llx type:%u "
- "sample_type %#llx cf_diag_events %d\n", __func__,
- event, event->cpu, attr->config, event->pmu->type,
- attr->sample_type, atomic_read(&cf_diag_events));
-
- if (event->attr.config != PERF_EVENT_CPUM_CF_DIAG ||
- event->attr.type != event->pmu->type)
- goto out;
-
- /* Raw events are used to access counters directly,
- * hence do not permit excludes.
- * This event is usesless without PERF_SAMPLE_RAW to return counter set
- * values as raw data.
- */
- if (attr->exclude_kernel || attr->exclude_user || attr->exclude_hv ||
- !(attr->sample_type & (PERF_SAMPLE_CPU | PERF_SAMPLE_RAW))) {
- err = -EOPNOTSUPP;
- goto out;
- }
-
- /* Initialize for using the CPU-measurement counter facility */
- err = cf_diag_perf_event_inuse();
- if (err < 0)
- goto out;
- event->destroy = cf_diag_perf_event_destroy;
-
- err = __hw_perf_event_init(event);
- if (unlikely(err))
- event->destroy(event);
-out:
- debug_sprintf_event(cf_diag_dbg, 5, "%s err %d\n", __func__, err);
- return err;
-}
-
-static void cf_diag_read(struct perf_event *event)
-{
- debug_sprintf_event(cf_diag_dbg, 5, "%s event %p\n", __func__, event);
-}
-
-/* Calculate memory needed to store all counter sets together with header and
- * trailer data. This is independend of the counter set authorization which
- * can vary depending on the configuration.
- */
-static size_t cf_diag_ctrset_maxsize(struct cpumf_ctr_info *info)
-{
- size_t max_size = sizeof(struct cf_trailer_entry);
- enum cpumf_ctr_set i;
-
- for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
- size_t size = cpum_cf_ctrset_size(i, info);
-
- if (size)
- max_size += size * sizeof(u64) +
- sizeof(struct cf_ctrset_entry);
- }
- debug_sprintf_event(cf_diag_dbg, 5, "%s max_size %zu\n", __func__,
- max_size);
-
- return max_size;
-}
-
-/* Read a counter set. The counter set number determines which counter set and
- * the CPUM-CF first and second version number determine the number of
- * available counters in this counter set.
- * Each counter set starts with header containing the counter set number and
- * the number of 8 byte counters.
- *
- * The functions returns the number of bytes occupied by this counter set
- * including the header.
- * If there is no counter in the counter set, this counter set is useless and
- * zero is returned on this case.
- */
-static size_t cf_diag_getctrset(struct cf_ctrset_entry *ctrdata, int ctrset,
- size_t room)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- size_t ctrset_size, need = 0;
- int rc = 3; /* Assume write failure */
-
- ctrdata->def = CF_DIAG_CTRSET_DEF;
- ctrdata->set = ctrset;
- ctrdata->res1 = 0;
- ctrset_size = cpum_cf_ctrset_size(ctrset, &cpuhw->info);
-
- if (ctrset_size) { /* Save data */
- need = ctrset_size * sizeof(u64) + sizeof(*ctrdata);
- if (need <= room)
- rc = ctr_stcctm(ctrset, ctrset_size,
- (u64 *)(ctrdata + 1));
- if (rc != 3)
- ctrdata->ctr = ctrset_size;
- else
- need = 0;
- }
-
- debug_sprintf_event(cf_diag_dbg, 6,
- "%s ctrset %d ctrset_size %zu cfvn %d csvn %d"
- " need %zd rc %d\n",
- __func__, ctrset, ctrset_size, cpuhw->info.cfvn,
- cpuhw->info.csvn, need, rc);
- return need;
-}
-
-/* Read out all counter sets and save them in the provided data buffer.
- * The last 64 byte host an artificial trailer entry.
- */
-static size_t cf_diag_getctr(void *data, size_t sz, unsigned long auth)
-{
- struct cf_trailer_entry *trailer;
- size_t offset = 0, done;
- int i;
-
- memset(data, 0, sz);
- sz -= sizeof(*trailer); /* Always room for trailer */
- for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
- struct cf_ctrset_entry *ctrdata = data + offset;
-
- if (!(auth & cpumf_ctr_ctl[i]))
- continue; /* Counter set not authorized */
-
- done = cf_diag_getctrset(ctrdata, i, sz - offset);
- offset += done;
- debug_sprintf_event(cf_diag_dbg, 6,
- "%s ctrset %d offset %zu done %zu\n",
- __func__, i, offset, done);
- }
- trailer = data + offset;
- cf_diag_trailer(trailer);
- return offset + sizeof(*trailer);
-}
-
-/* Calculate the difference for each counter in a counter set. */
-static void cf_diag_diffctrset(u64 *pstart, u64 *pstop, int counters)
-{
- for (; --counters >= 0; ++pstart, ++pstop)
- if (*pstop >= *pstart)
- *pstop -= *pstart;
- else
- *pstop = *pstart - *pstop;
-}
-
-/* Scan the counter sets and calculate the difference of each counter
- * in each set. The result is the increment of each counter during the
- * period the counter set has been activated.
- *
- * Return true on success.
- */
-static int cf_diag_diffctr(struct cf_diag_csd *csd, unsigned long auth)
-{
- struct cf_trailer_entry *trailer_start, *trailer_stop;
- struct cf_ctrset_entry *ctrstart, *ctrstop;
- size_t offset = 0;
-
- auth &= (1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1;
- do {
- ctrstart = (struct cf_ctrset_entry *)(csd->start + offset);
- ctrstop = (struct cf_ctrset_entry *)(csd->data + offset);
-
- if (memcmp(ctrstop, ctrstart, sizeof(*ctrstop))) {
- pr_err("cpum_cf_diag counter set compare error "
- "in set %i\n", ctrstart->set);
- return 0;
- }
- auth &= ~cpumf_ctr_ctl[ctrstart->set];
- if (ctrstart->def == CF_DIAG_CTRSET_DEF) {
- cf_diag_diffctrset((u64 *)(ctrstart + 1),
- (u64 *)(ctrstop + 1), ctrstart->ctr);
- offset += ctrstart->ctr * sizeof(u64) +
- sizeof(*ctrstart);
- }
- debug_sprintf_event(cf_diag_dbg, 6,
- "%s set %d ctr %d offset %zu auth %lx\n",
- __func__, ctrstart->set, ctrstart->ctr,
- offset, auth);
- } while (ctrstart->def && auth);
-
- /* Save time_stamp from start of event in stop's trailer */
- trailer_start = (struct cf_trailer_entry *)(csd->start + offset);
- trailer_stop = (struct cf_trailer_entry *)(csd->data + offset);
- trailer_stop->progusage[0] = trailer_start->timestamp;
-
- return 1;
-}
-
-/* Create perf event sample with the counter sets as raw data. The sample
- * is then pushed to the event subsystem and the function checks for
- * possible event overflows. If an event overflow occurs, the PMU is
- * stopped.
- *
- * Return non-zero if an event overflow occurred.
- */
-static int cf_diag_push_sample(struct perf_event *event,
- struct cf_diag_csd *csd)
-{
- struct perf_sample_data data;
- struct perf_raw_record raw;
- struct pt_regs regs;
- int overflow;
-
- /* Setup perf sample */
- perf_sample_data_init(&data, 0, event->hw.last_period);
- memset(®s, 0, sizeof(regs));
- memset(&raw, 0, sizeof(raw));
-
- if (event->attr.sample_type & PERF_SAMPLE_CPU)
- data.cpu_entry.cpu = event->cpu;
- if (event->attr.sample_type & PERF_SAMPLE_RAW) {
- raw.frag.size = csd->used;
- raw.frag.data = csd->data;
- raw.size = csd->used;
- data.raw = &raw;
- }
-
- overflow = perf_event_overflow(event, &data, ®s);
- debug_sprintf_event(cf_diag_dbg, 6,
- "%s event %p cpu %d sample_type %#llx raw %d "
- "ov %d\n", __func__, event, event->cpu,
- event->attr.sample_type, raw.size, overflow);
- if (overflow)
- event->pmu->stop(event, 0);
-
- perf_event_update_userpage(event);
- return overflow;
-}
-
-static void cf_diag_start(struct perf_event *event, int flags)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- struct cf_diag_csd *csd = this_cpu_ptr(&cf_diag_csd);
- struct hw_perf_event *hwc = &event->hw;
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s event %p cpu %d flags %#x hwc-state %#x\n",
- __func__, event, event->cpu, flags, hwc->state);
- if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
- return;
-
- /* (Re-)enable and activate all counter sets */
- lcctl(0); /* Reset counter sets */
- hwc->state = 0;
- ctr_set_multiple_enable(&cpuhw->state, hwc->config_base);
- lcctl(cpuhw->state); /* Enable counter sets */
- csd->used = cf_diag_getctr(csd->start, sizeof(csd->start),
- event->hw.config_base);
- ctr_set_multiple_start(&cpuhw->state, hwc->config_base);
- /* Function cf_diag_enable() starts the counter sets. */
-}
-
-static void cf_diag_stop(struct perf_event *event, int flags)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- struct cf_diag_csd *csd = this_cpu_ptr(&cf_diag_csd);
- struct hw_perf_event *hwc = &event->hw;
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s event %p cpu %d flags %#x hwc-state %#x\n",
- __func__, event, event->cpu, flags, hwc->state);
-
- /* Deactivate all counter sets */
- ctr_set_multiple_stop(&cpuhw->state, hwc->config_base);
- local64_inc(&event->count);
- csd->used = cf_diag_getctr(csd->data, sizeof(csd->data),
- event->hw.config_base);
- if (cf_diag_diffctr(csd, event->hw.config_base))
- cf_diag_push_sample(event, csd);
- hwc->state |= PERF_HES_STOPPED;
-}
-
-static int cf_diag_add(struct perf_event *event, int flags)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- int err = 0;
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s event %p cpu %d flags %#x cpuhw %p\n",
- __func__, event, event->cpu, flags, cpuhw);
-
- if (cpuhw->flags & PMU_F_IN_USE) {
- err = -EAGAIN;
- goto out;
- }
-
- event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
-
- cpuhw->flags |= PMU_F_IN_USE;
- if (flags & PERF_EF_START)
- cf_diag_start(event, PERF_EF_RELOAD);
-out:
- debug_sprintf_event(cf_diag_dbg, 5, "%s err %d\n", __func__, err);
- return err;
-}
-
-static void cf_diag_del(struct perf_event *event, int flags)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s event %p cpu %d flags %#x\n",
- __func__, event, event->cpu, flags);
-
- cf_diag_stop(event, PERF_EF_UPDATE);
- ctr_set_multiple_stop(&cpuhw->state, event->hw.config_base);
- ctr_set_multiple_disable(&cpuhw->state, event->hw.config_base);
- cpuhw->flags &= ~PMU_F_IN_USE;
-}
-
-/* Default counter set events and format attribute groups */
-
-CPUMF_EVENT_ATTR(CF_DIAG, CF_DIAG, PERF_EVENT_CPUM_CF_DIAG);
-
-static struct attribute *cf_diag_events_attr[] = {
- CPUMF_EVENT_PTR(CF_DIAG, CF_DIAG),
- NULL,
-};
-
-PMU_FORMAT_ATTR(event, "config:0-63");
-
-static struct attribute *cf_diag_format_attr[] = {
- &format_attr_event.attr,
- NULL,
-};
-
-static struct attribute_group cf_diag_events_group = {
- .name = "events",
- .attrs = cf_diag_events_attr,
-};
-static struct attribute_group cf_diag_format_group = {
- .name = "format",
- .attrs = cf_diag_format_attr,
-};
-static const struct attribute_group *cf_diag_attr_groups[] = {
- &cf_diag_events_group,
- &cf_diag_format_group,
- NULL,
-};
-
-/* Performance monitoring unit for s390x */
-static struct pmu cf_diag = {
- .task_ctx_nr = perf_sw_context,
- .pmu_enable = cf_diag_enable,
- .pmu_disable = cf_diag_disable,
- .event_init = cf_diag_event_init,
- .add = cf_diag_add,
- .del = cf_diag_del,
- .start = cf_diag_start,
- .stop = cf_diag_stop,
- .read = cf_diag_read,
-
- .attr_groups = cf_diag_attr_groups
-};
-
-/* Get the CPU speed, try sampling facility first and CPU attributes second. */
-static void cf_diag_get_cpu_speed(void)
-{
- if (cpum_sf_avail()) { /* Sampling facility first */
- struct hws_qsi_info_block si;
-
- memset(&si, 0, sizeof(si));
- if (!qsi(&si)) {
- cf_diag_cpu_speed = si.cpu_speed;
- return;
- }
- }
-
- if (test_facility(34)) { /* CPU speed extract static part */
- unsigned long mhz = __ecag(ECAG_CPU_ATTRIBUTE, 0);
-
- if (mhz != -1UL)
- cf_diag_cpu_speed = mhz & 0xffffffff;
- }
-}
-
-/* Code to create device and file I/O operations */
-static atomic_t ctrset_opencnt = ATOMIC_INIT(0); /* Excl. access */
-
-static int cf_diag_open(struct inode *inode, struct file *file)
-{
- int err = 0;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (atomic_xchg(&ctrset_opencnt, 1))
- return -EBUSY;
-
- /* Avoid concurrent access with perf_event_open() system call */
- mutex_lock(&cf_diag_reserve_mutex);
- if (atomic_read(&cf_diag_events) || __kernel_cpumcf_begin())
- err = -EBUSY;
- mutex_unlock(&cf_diag_reserve_mutex);
- if (err) {
- atomic_set(&ctrset_opencnt, 0);
- return err;
- }
- file->private_data = NULL;
- debug_sprintf_event(cf_diag_dbg, 2, "%s\n", __func__);
- /* nonseekable_open() never fails */
- return nonseekable_open(inode, file);
-}
-
-/* Variables for ioctl() interface support */
-static DEFINE_MUTEX(cf_diag_ctrset_mutex);
-static struct cf_diag_ctrset {
- unsigned long ctrset; /* Bit mask of counter set to read */
- cpumask_t mask; /* CPU mask to read from */
-} cf_diag_ctrset;
-
-static void cf_diag_ctrset_clear(void)
-{
- cpumask_clear(&cf_diag_ctrset.mask);
- cf_diag_ctrset.ctrset = 0;
-}
-
-static void cf_diag_release_cpu(void *p)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
-
- debug_sprintf_event(cf_diag_dbg, 3, "%s cpu %d\n", __func__,
- smp_processor_id());
- lcctl(0); /* Reset counter sets */
- cpuhw->state = 0; /* Save state in CPU hardware state */
-}
-
-/* Release function is also called when application gets terminated without
- * doing a proper ioctl(..., S390_HWCTR_STOP, ...) command.
- * Since only one application is allowed to open the device, simple stop all
- * CPU counter sets.
- */
-static int cf_diag_release(struct inode *inode, struct file *file)
-{
- on_each_cpu(cf_diag_release_cpu, NULL, 1);
- cf_diag_ctrset_clear();
- atomic_set(&ctrset_opencnt, 0);
- __kernel_cpumcf_end();
- debug_sprintf_event(cf_diag_dbg, 2, "%s\n", __func__);
- return 0;
-}
-
-struct cf_diag_call_on_cpu_parm { /* Parm struct for smp_call_on_cpu */
- unsigned int sets; /* Counter set bit mask */
- atomic_t cpus_ack; /* # CPUs successfully executed func */
-};
-
-static int cf_diag_all_copy(unsigned long arg, cpumask_t *mask)
-{
- struct s390_ctrset_read __user *ctrset_read;
- unsigned int cpu, cpus, rc;
- void __user *uptr;
-
- ctrset_read = (struct s390_ctrset_read __user *)arg;
- uptr = ctrset_read->data;
- for_each_cpu(cpu, mask) {
- struct cf_diag_csd *csd = per_cpu_ptr(&cf_diag_csd, cpu);
- struct s390_ctrset_cpudata __user *ctrset_cpudata;
-
- ctrset_cpudata = uptr;
- debug_sprintf_event(cf_diag_dbg, 5, "%s cpu %d used %zd\n",
- __func__, cpu, csd->used);
- rc = put_user(cpu, &ctrset_cpudata->cpu_nr);
- rc |= put_user(csd->sets, &ctrset_cpudata->no_sets);
- rc |= copy_to_user(ctrset_cpudata->data, csd->data, csd->used);
- if (rc)
- return -EFAULT;
- uptr += sizeof(struct s390_ctrset_cpudata) + csd->used;
- cond_resched();
- }
- cpus = cpumask_weight(mask);
- if (put_user(cpus, &ctrset_read->no_cpus))
- return -EFAULT;
- debug_sprintf_event(cf_diag_dbg, 5, "%s copied %ld\n",
- __func__, uptr - (void __user *)ctrset_read->data);
- return 0;
-}
-
-static size_t cf_diag_cpuset_read(struct s390_ctrset_setdata *p, int ctrset,
- int ctrset_size, size_t room)
-{
- size_t need = 0;
- int rc = -1;
-
- need = sizeof(*p) + sizeof(u64) * ctrset_size;
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s room %zd need %zd set %#x set_size %d\n",
- __func__, room, need, ctrset, ctrset_size);
- if (need <= room) {
- p->set = cpumf_ctr_ctl[ctrset];
- p->no_cnts = ctrset_size;
- rc = ctr_stcctm(ctrset, ctrset_size, (u64 *)p->cv);
- if (rc == 3) /* Nothing stored */
- need = 0;
- }
- debug_sprintf_event(cf_diag_dbg, 5, "%s need %zd rc %d\n", __func__,
- need, rc);
- return need;
-}
-
-/* Read all counter sets. Since the perf_event_open() system call with
- * event cpum_cf_diag/.../ is blocked when this interface is active, reuse
- * the perf_event_open() data buffer to store the counter sets.
- */
-static void cf_diag_cpu_read(void *parm)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- struct cf_diag_csd *csd = this_cpu_ptr(&cf_diag_csd);
- struct cf_diag_call_on_cpu_parm *p = parm;
- int set, set_size;
- size_t space;
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s new %#x flags %#x state %#llx\n",
- __func__, p->sets, cpuhw->flags,
- cpuhw->state);
- /* No data saved yet */
- csd->used = 0;
- csd->sets = 0;
- memset(csd->data, 0, sizeof(csd->data));
-
- /* Scan the counter sets */
- for (set = CPUMF_CTR_SET_BASIC; set < CPUMF_CTR_SET_MAX; ++set) {
- struct s390_ctrset_setdata *sp = (void *)csd->data + csd->used;
-
- if (!(p->sets & cpumf_ctr_ctl[set]))
- continue; /* Counter set not in list */
- set_size = cpum_cf_ctrset_size(set, &cpuhw->info);
- space = sizeof(csd->data) - csd->used;
- space = cf_diag_cpuset_read(sp, set, set_size, space);
- if (space) {
- csd->used += space;
- csd->sets += 1;
- }
- debug_sprintf_event(cf_diag_dbg, 5, "%s sp %px space %zd\n",
- __func__, sp, space);
- }
- debug_sprintf_event(cf_diag_dbg, 5, "%s sets %d used %zd\n", __func__,
- csd->sets, csd->used);
-}
-
-static int cf_diag_all_read(unsigned long arg)
-{
- struct cf_diag_call_on_cpu_parm p;
- cpumask_var_t mask;
- int rc;
-
- debug_sprintf_event(cf_diag_dbg, 5, "%s\n", __func__);
- if (!alloc_cpumask_var(&mask, GFP_KERNEL))
- return -ENOMEM;
-
- p.sets = cf_diag_ctrset.ctrset;
- cpumask_and(mask, &cf_diag_ctrset.mask, cpu_online_mask);
- on_each_cpu_mask(mask, cf_diag_cpu_read, &p, 1);
- rc = cf_diag_all_copy(arg, mask);
- free_cpumask_var(mask);
- debug_sprintf_event(cf_diag_dbg, 5, "%s rc %d\n", __func__, rc);
- return rc;
-}
-
-/* Stop all counter sets via ioctl interface */
-static void cf_diag_ioctl_off(void *parm)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- struct cf_diag_call_on_cpu_parm *p = parm;
- int rc;
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s new %#x flags %#x state %#llx\n",
- __func__, p->sets, cpuhw->flags,
- cpuhw->state);
-
- ctr_set_multiple_disable(&cpuhw->state, p->sets);
- ctr_set_multiple_stop(&cpuhw->state, p->sets);
- rc = lcctl(cpuhw->state); /* Stop counter sets */
- if (!cpuhw->state)
- cpuhw->flags &= ~PMU_F_IN_USE;
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s rc %d flags %#x state %#llx\n", __func__,
- rc, cpuhw->flags, cpuhw->state);
-}
-
-/* Start counter sets on particular CPU */
-static void cf_diag_ioctl_on(void *parm)
-{
- struct cpu_cf_events *cpuhw = this_cpu_ptr(&cpu_cf_events);
- struct cf_diag_call_on_cpu_parm *p = parm;
- int rc;
-
- debug_sprintf_event(cf_diag_dbg, 5,
- "%s new %#x flags %#x state %#llx\n",
- __func__, p->sets, cpuhw->flags,
- cpuhw->state);
-
- if (!(cpuhw->flags & PMU_F_IN_USE))
- cpuhw->state = 0;
- cpuhw->flags |= PMU_F_IN_USE;
- rc = lcctl(cpuhw->state); /* Reset unused counter sets */
- ctr_set_multiple_enable(&cpuhw->state, p->sets);
- ctr_set_multiple_start(&cpuhw->state, p->sets);
- rc |= lcctl(cpuhw->state); /* Start counter sets */
- if (!rc)
- atomic_inc(&p->cpus_ack);
- debug_sprintf_event(cf_diag_dbg, 5, "%s rc %d state %#llx\n",
- __func__, rc, cpuhw->state);
-}
-
-static int cf_diag_all_stop(void)
-{
- struct cf_diag_call_on_cpu_parm p = {
- .sets = cf_diag_ctrset.ctrset,
- };
- cpumask_var_t mask;
-
- if (!alloc_cpumask_var(&mask, GFP_KERNEL))
- return -ENOMEM;
- cpumask_and(mask, &cf_diag_ctrset.mask, cpu_online_mask);
- on_each_cpu_mask(mask, cf_diag_ioctl_off, &p, 1);
- free_cpumask_var(mask);
- return 0;
-}
-
-static int cf_diag_all_start(void)
-{
- struct cf_diag_call_on_cpu_parm p = {
- .sets = cf_diag_ctrset.ctrset,
- .cpus_ack = ATOMIC_INIT(0),
- };
- cpumask_var_t mask;
- int rc = 0;
-
- if (!alloc_cpumask_var(&mask, GFP_KERNEL))
- return -ENOMEM;
- cpumask_and(mask, &cf_diag_ctrset.mask, cpu_online_mask);
- on_each_cpu_mask(mask, cf_diag_ioctl_on, &p, 1);
- if (atomic_read(&p.cpus_ack) != cpumask_weight(mask)) {
- on_each_cpu_mask(mask, cf_diag_ioctl_off, &p, 1);
- rc = -EIO;
- }
- free_cpumask_var(mask);
- return rc;
-}
-
-/* Return the maximum required space for all possible CPUs in case one
- * CPU will be onlined during the START, READ, STOP cycles.
- * To find out the size of the counter sets, any one CPU will do. They
- * all have the same counter sets.
- */
-static size_t cf_diag_needspace(unsigned int sets)
-{
- struct cpu_cf_events *cpuhw = get_cpu_ptr(&cpu_cf_events);
- size_t bytes = 0;
- int i;
-
- for (i = CPUMF_CTR_SET_BASIC; i < CPUMF_CTR_SET_MAX; ++i) {
- if (!(sets & cpumf_ctr_ctl[i]))
- continue;
- bytes += cpum_cf_ctrset_size(i, &cpuhw->info) * sizeof(u64) +
- sizeof(((struct s390_ctrset_setdata *)0)->set) +
- sizeof(((struct s390_ctrset_setdata *)0)->no_cnts);
- }
- bytes = sizeof(((struct s390_ctrset_read *)0)->no_cpus) + nr_cpu_ids *
- (bytes + sizeof(((struct s390_ctrset_cpudata *)0)->cpu_nr) +
- sizeof(((struct s390_ctrset_cpudata *)0)->no_sets));
- debug_sprintf_event(cf_diag_dbg, 5, "%s bytes %ld\n", __func__,
- bytes);
- put_cpu_ptr(&cpu_cf_events);
- return bytes;
-}
-
-static long cf_diag_ioctl_read(unsigned long arg)
-{
- struct s390_ctrset_read read;
- int ret = 0;
-
- debug_sprintf_event(cf_diag_dbg, 5, "%s\n", __func__);
- if (copy_from_user(&read, (char __user *)arg, sizeof(read)))
- return -EFAULT;
- ret = cf_diag_all_read(arg);
- debug_sprintf_event(cf_diag_dbg, 5, "%s ret %d\n", __func__, ret);
- return ret;
-}
-
-static long cf_diag_ioctl_stop(void)
-{
- int ret;
-
- debug_sprintf_event(cf_diag_dbg, 5, "%s\n", __func__);
- ret = cf_diag_all_stop();
- cf_diag_ctrset_clear();
- debug_sprintf_event(cf_diag_dbg, 5, "%s ret %d\n", __func__, ret);
- return ret;
-}
-
-static long cf_diag_ioctl_start(unsigned long arg)
-{
- struct s390_ctrset_start __user *ustart;
- struct s390_ctrset_start start;
- void __user *umask;
- unsigned int len;
- int ret = 0;
- size_t need;
-
- if (cf_diag_ctrset.ctrset)
- return -EBUSY;
- ustart = (struct s390_ctrset_start __user *)arg;
- if (copy_from_user(&start, ustart, sizeof(start)))
- return -EFAULT;
- if (start.version != S390_HWCTR_START_VERSION)
- return -EINVAL;
- if (start.counter_sets & ~(cpumf_ctr_ctl[CPUMF_CTR_SET_BASIC] |
- cpumf_ctr_ctl[CPUMF_CTR_SET_USER] |
- cpumf_ctr_ctl[CPUMF_CTR_SET_CRYPTO] |
- cpumf_ctr_ctl[CPUMF_CTR_SET_EXT] |
- cpumf_ctr_ctl[CPUMF_CTR_SET_MT_DIAG]))
- return -EINVAL; /* Invalid counter set */
- if (!start.counter_sets)
- return -EINVAL; /* No counter set at all? */
- cpumask_clear(&cf_diag_ctrset.mask);
- len = min_t(u64, start.cpumask_len, cpumask_size());
- umask = (void __user *)start.cpumask;
- if (copy_from_user(&cf_diag_ctrset.mask, umask, len))
- return -EFAULT;
- if (cpumask_empty(&cf_diag_ctrset.mask))
- return -EINVAL;
- need = cf_diag_needspace(start.counter_sets);
- if (put_user(need, &ustart->data_bytes))
- ret = -EFAULT;
- if (ret)
- goto out;
- cf_diag_ctrset.ctrset = start.counter_sets;
- ret = cf_diag_all_start();
-out:
- if (ret)
- cf_diag_ctrset_clear();
- debug_sprintf_event(cf_diag_dbg, 2, "%s sets %#lx need %ld ret %d\n",
- __func__, cf_diag_ctrset.ctrset, need, ret);
- return ret;
-}
-
-static long cf_diag_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int ret;
-
- debug_sprintf_event(cf_diag_dbg, 2, "%s cmd %#x arg %lx\n", __func__,
- cmd, arg);
- get_online_cpus();
- mutex_lock(&cf_diag_ctrset_mutex);
- switch (cmd) {
- case S390_HWCTR_START:
- ret = cf_diag_ioctl_start(arg);
- break;
- case S390_HWCTR_STOP:
- ret = cf_diag_ioctl_stop();
- break;
- case S390_HWCTR_READ:
- ret = cf_diag_ioctl_read(arg);
- break;
- default:
- ret = -ENOTTY;
- break;
- }
- mutex_unlock(&cf_diag_ctrset_mutex);
- put_online_cpus();
- debug_sprintf_event(cf_diag_dbg, 2, "%s ret %d\n", __func__, ret);
- return ret;
-}
-
-static const struct file_operations cf_diag_fops = {
- .owner = THIS_MODULE,
- .open = cf_diag_open,
- .release = cf_diag_release,
- .unlocked_ioctl = cf_diag_ioctl,
- .compat_ioctl = cf_diag_ioctl,
- .llseek = no_llseek
-};
-
-static struct miscdevice cf_diag_dev = {
- .name = S390_HWCTR_DEVICE,
- .minor = MISC_DYNAMIC_MINOR,
- .fops = &cf_diag_fops,
-};
-
-static int cf_diag_online_cpu(unsigned int cpu)
-{
- struct cf_diag_call_on_cpu_parm p;
-
- mutex_lock(&cf_diag_ctrset_mutex);
- if (!cf_diag_ctrset.ctrset)
- goto out;
- p.sets = cf_diag_ctrset.ctrset;
- cf_diag_ioctl_on(&p);
-out:
- mutex_unlock(&cf_diag_ctrset_mutex);
- return 0;
-}
-
-static int cf_diag_offline_cpu(unsigned int cpu)
-{
- struct cf_diag_call_on_cpu_parm p;
-
- mutex_lock(&cf_diag_ctrset_mutex);
- if (!cf_diag_ctrset.ctrset)
- goto out;
- p.sets = cf_diag_ctrset.ctrset;
- cf_diag_ioctl_off(&p);
-out:
- mutex_unlock(&cf_diag_ctrset_mutex);
- return 0;
-}
-
-/* Initialize the counter set PMU to generate complete counter set data as
- * event raw data. This relies on the CPU Measurement Counter Facility device
- * already being loaded and initialized.
- */
-static int __init cf_diag_init(void)
-{
- struct cpumf_ctr_info info;
- size_t need;
- int rc;
-
- if (!kernel_cpumcf_avail() || !stccm_avail() || qctri(&info))
- return -ENODEV;
- cf_diag_get_cpu_speed();
-
- /* Make sure the counter set data fits into predefined buffer. */
- need = cf_diag_ctrset_maxsize(&info);
- if (need > sizeof(((struct cf_diag_csd *)0)->start)) {
- pr_err("Insufficient memory for PMU(cpum_cf_diag) need=%zu\n",
- need);
- return -ENOMEM;
- }
-
- rc = misc_register(&cf_diag_dev);
- if (rc) {
- pr_err("Registration of /dev/" S390_HWCTR_DEVICE
- "failed rc=%d\n", rc);
- goto out;
- }
-
- /* Setup s390dbf facility */
- cf_diag_dbg = debug_register(KMSG_COMPONENT, 2, 1, 128);
- if (!cf_diag_dbg) {
- pr_err("Registration of s390dbf(cpum_cf_diag) failed\n");
- rc = -ENOMEM;
- goto out_dbf;
- }
- debug_register_view(cf_diag_dbg, &debug_sprintf_view);
-
- rc = perf_pmu_register(&cf_diag, "cpum_cf_diag", -1);
- if (rc) {
- pr_err("Registration of PMU(cpum_cf_diag) failed with rc=%i\n",
- rc);
- goto out_perf;
- }
- rc = cpuhp_setup_state_nocalls(CPUHP_AP_PERF_S390_CFD_ONLINE,
- "perf/s390/cfd:online",
- cf_diag_online_cpu, cf_diag_offline_cpu);
- if (!rc)
- goto out;
-
- pr_err("Registration of CPUHP_AP_PERF_S390_CFD_ONLINE failed rc=%i\n",
- rc);
- perf_pmu_unregister(&cf_diag);
-out_perf:
- debug_unregister_view(cf_diag_dbg, &debug_sprintf_view);
- debug_unregister(cf_diag_dbg);
-out_dbf:
- misc_deregister(&cf_diag_dev);
-out:
- return rc;
-}
-device_initcall(cf_diag_init);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 7ae5dde..350e94d 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -166,6 +166,12 @@
p->thread.acrs[1] = (unsigned int)tls;
}
}
+ /*
+ * s390 stores the svc return address in arch_data when calling
+ * sigreturn()/restart_syscall() via vdso. 1 means no valid address
+ * stored.
+ */
+ p->restart_block.arch_data = 1;
return 0;
}
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 5486d82..ff0f9e8 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -354,7 +354,7 @@
set_task_stack_end_magic(current);
stack += STACK_INIT_OFFSET;
S390_lowcore.kernel_stack = stack;
- CALL_ON_STACK_NORETURN(rest_init, stack);
+ call_on_stack_noreturn(rest_init, stack);
}
static void __init setup_lowcore_dat_off(void)
@@ -442,6 +442,7 @@
lc->br_r1_trampoline = 0x07f1; /* br %r1 */
lc->return_lpswe = gen_lpswe(__LC_RETURN_PSW);
lc->return_mcck_lpswe = gen_lpswe(__LC_RETURN_MCCK_PSW);
+ lc->preempt_count = PREEMPT_DISABLED;
set_prefix((u32)(unsigned long) lc);
lowcore_ptr[0] = lc;
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 080e7ae..78ef53b 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -32,6 +32,7 @@
#include <linux/uaccess.h>
#include <asm/lowcore.h>
#include <asm/switch_to.h>
+#include <asm/vdso.h>
#include "entry.h"
/*
@@ -171,7 +172,6 @@
fpregs_load(&user_sregs.fpregs, ¤t->thread.fpu);
clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */
- clear_pt_regs_flag(regs, PIF_SYSCALL_RESTART);
return 0;
}
@@ -334,15 +334,10 @@
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
- if (ka->sa.sa_flags & SA_RESTORER) {
+ if (ka->sa.sa_flags & SA_RESTORER)
restorer = (unsigned long) ka->sa.sa_restorer;
- } else {
- /* Signal frame without vector registers are short ! */
- __u16 __user *svc = (void __user *) frame + frame_size - 2;
- if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
- return -EFAULT;
- restorer = (unsigned long) svc;
- }
+ else
+ restorer = VDSO64_SYMBOL(current, sigreturn);
/* Set up registers for signal handler */
regs->gprs[14] = restorer;
@@ -397,14 +392,10 @@
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
- if (ksig->ka.sa.sa_flags & SA_RESTORER) {
+ if (ksig->ka.sa.sa_flags & SA_RESTORER)
restorer = (unsigned long) ksig->ka.sa.sa_restorer;
- } else {
- __u16 __user *svc = &frame->svc_insn;
- if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
- return -EFAULT;
- restorer = (unsigned long) svc;
- }
+ else
+ restorer = VDSO64_SYMBOL(current, rt_sigreturn);
/* Create siginfo on the signal stack */
if (copy_siginfo_to_user(&frame->info, &ksig->info))
@@ -501,7 +492,7 @@
}
/* No longer in a system call */
clear_pt_regs_flag(regs, PIF_SYSCALL);
- clear_pt_regs_flag(regs, PIF_SYSCALL_RESTART);
+
rseq_signal_deliver(&ksig, regs);
if (is_compat_task())
handle_signal32(&ksig, oldset, regs);
@@ -517,14 +508,20 @@
switch (regs->gprs[2]) {
case -ERESTART_RESTARTBLOCK:
/* Restart with sys_restart_syscall */
- regs->int_code = __NR_restart_syscall;
- fallthrough;
+ regs->gprs[2] = regs->orig_gpr2;
+ current->restart_block.arch_data = regs->psw.addr;
+ if (is_compat_task())
+ regs->psw.addr = VDSO32_SYMBOL(current, restart_syscall);
+ else
+ regs->psw.addr = VDSO64_SYMBOL(current, restart_syscall);
+ if (test_thread_flag(TIF_SINGLE_STEP))
+ clear_thread_flag(TIF_PER_TRAP);
+ break;
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
- /* Restart system call with magic TIF bit. */
regs->gprs[2] = regs->orig_gpr2;
- set_pt_regs_flag(regs, PIF_SYSCALL_RESTART);
+ regs->psw.addr = __rewind_psw(regs->psw, regs->int_code >> 16);
if (test_thread_flag(TIF_SINGLE_STEP))
clear_thread_flag(TIF_PER_TRAP);
break;
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index ff42d3a..8984711 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -210,6 +210,7 @@
lc->br_r1_trampoline = 0x07f1; /* br %r1 */
lc->return_lpswe = gen_lpswe(__LC_RETURN_PSW);
lc->return_mcck_lpswe = gen_lpswe(__LC_RETURN_MCCK_PSW);
+ lc->preempt_count = PREEMPT_DISABLED;
if (nmi_alloc_per_cpu(lc))
goto out;
lowcore_ptr[cpu] = lc;
@@ -300,24 +301,28 @@
pcpu_sigp_retry(pcpu, SIGP_RESTART, 0);
}
+typedef void (pcpu_delegate_fn)(void *);
+
/*
* Call function via PSW restart on pcpu and stop the current cpu.
*/
-static void __pcpu_delegate(void (*func)(void*), void *data)
+static void __pcpu_delegate(pcpu_delegate_fn *func, void *data)
{
func(data); /* should not return */
}
static void __no_sanitize_address pcpu_delegate(struct pcpu *pcpu,
- void (*func)(void *),
+ pcpu_delegate_fn *func,
void *data, unsigned long stack)
{
struct lowcore *lc = lowcore_ptr[pcpu - pcpu_devices];
unsigned long source_cpu = stap();
__load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT);
- if (pcpu->address == source_cpu)
- CALL_ON_STACK(__pcpu_delegate, stack, 2, func, data);
+ if (pcpu->address == source_cpu) {
+ call_on_stack(2, stack, void, __pcpu_delegate,
+ pcpu_delegate_fn *, func, void *, data);
+ }
/* Stop target cpu (if func returns this stops the current cpu). */
pcpu_sigp_retry(pcpu, SIGP_STOP, 0);
/* Restart func on the target cpu and stop the current cpu. */
@@ -898,7 +903,7 @@
S390_lowcore.restart_source = -1UL;
__ctl_load(S390_lowcore.cregs_save_area, 0, 15);
__load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT);
- CALL_ON_STACK_NORETURN(smp_init_secondary, S390_lowcore.kernel_stack);
+ call_on_stack_noreturn(smp_init_secondary, S390_lowcore.kernel_stack);
}
/* Upping and downing of CPUs */
diff --git a/arch/s390/kernel/syscall.c b/arch/s390/kernel/syscall.c
index 76f7916..8fe2d23b 100644
--- a/arch/s390/kernel/syscall.c
+++ b/arch/s390/kernel/syscall.c
@@ -108,7 +108,7 @@
return -ENOSYS;
}
-void do_syscall(struct pt_regs *regs)
+static void do_syscall(struct pt_regs *regs)
{
unsigned long nr;
@@ -121,6 +121,10 @@
regs->gprs[2] = nr;
+ if (nr == __NR_restart_syscall && !(current->restart_block.arch_data & 1)) {
+ regs->psw.addr = current->restart_block.arch_data;
+ current->restart_block.arch_data = 1;
+ }
nr = syscall_enter_from_user_mode_work(regs, nr);
/*
@@ -130,13 +134,16 @@
* work, the ptrace code sets PIF_SYSCALL_RET_SET, which is checked here
* and if set, the syscall will be skipped.
*/
- if (!test_pt_regs_flag(regs, PIF_SYSCALL_RET_SET)) {
- regs->gprs[2] = -ENOSYS;
- if (likely(nr < NR_syscalls))
- regs->gprs[2] = current->thread.sys_call_table[nr](regs);
- } else {
- clear_pt_regs_flag(regs, PIF_SYSCALL_RET_SET);
- }
+
+ if (unlikely(test_and_clear_pt_regs_flag(regs, PIF_SYSCALL_RET_SET)))
+ goto out;
+ regs->gprs[2] = -ENOSYS;
+ if (likely(nr >= NR_syscalls))
+ goto out;
+ do {
+ regs->gprs[2] = current->thread.sys_call_table[nr](regs);
+ } while (test_and_clear_pt_regs_flag(regs, PIF_EXECVE_PGSTE_RESTART));
+out:
syscall_exit_to_user_mode_work(regs);
}
@@ -154,13 +161,8 @@
if (per_trap)
set_thread_flag(TIF_PER_TRAP);
- for (;;) {
- regs->flags = 0;
- set_pt_regs_flag(regs, PIF_SYSCALL);
- do_syscall(regs);
- if (!test_pt_regs_flag(regs, PIF_SYSCALL_RESTART))
- break;
- local_irq_enable();
- }
+ regs->flags = 0;
+ set_pt_regs_flag(regs, PIF_SYSCALL);
+ do_syscall(regs);
exit_to_user_mode();
}
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 019c574..7694727 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -277,6 +277,8 @@
{
int val = 1;
+ if (!IS_ENABLED(CONFIG_BUG))
+ return;
asm volatile(
" mc 0,0\n"
"0: xgr %0,%0\n"
@@ -299,10 +301,9 @@
void noinstr __do_pgm_check(struct pt_regs *regs)
{
unsigned long last_break = S390_lowcore.breaking_event_addr;
- unsigned int trapnr, syscall_redirect = 0;
+ unsigned int trapnr;
irqentry_state_t state;
- add_random_kstack_offset();
regs->int_code = *(u32 *)&S390_lowcore.pgm_ilc;
regs->int_parm_long = S390_lowcore.trans_exc_code;
@@ -344,18 +345,9 @@
trapnr = regs->int_code & PGM_INT_CODE_MASK;
if (trapnr)
pgm_check_table[trapnr](regs);
- syscall_redirect = user_mode(regs) && test_pt_regs_flag(regs, PIF_SYSCALL);
out:
local_irq_disable();
irqentry_exit(regs, state);
-
- if (syscall_redirect) {
- enter_from_user_mode(regs);
- local_irq_enable();
- regs->orig_gpr2 = regs->gprs[2];
- do_syscall(regs);
- exit_to_user_mode();
- }
}
/*
diff --git a/arch/s390/kernel/uv.c b/arch/s390/kernel/uv.c
index 6be2167..aeb0a15 100644
--- a/arch/s390/kernel/uv.c
+++ b/arch/s390/kernel/uv.c
@@ -358,6 +358,15 @@
static struct kobj_attribute uv_query_facilities_attr =
__ATTR(facilities, 0444, uv_query_facilities, NULL);
+static ssize_t uv_query_feature_indications(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ return sysfs_emit(buf, "%lx\n", uv_info.uv_feature_indications);
+}
+
+static struct kobj_attribute uv_query_feature_indications_attr =
+ __ATTR(feature_indications, 0444, uv_query_feature_indications, NULL);
+
static ssize_t uv_query_max_guest_cpus(struct kobject *kobj,
struct kobj_attribute *attr, char *page)
{
@@ -390,6 +399,7 @@
static struct attribute *uv_query_attrs[] = {
&uv_query_facilities_attr.attr,
+ &uv_query_feature_indications_attr.attr,
&uv_query_max_guest_cpus_attr.attr,
&uv_query_max_guest_vms_attr.attr,
&uv_query_max_guest_addr_attr.attr,
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 8c4e07d..9969426 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -20,7 +20,7 @@
#include <asm/vdso.h>
extern char vdso64_start[], vdso64_end[];
-static unsigned int vdso_pages;
+extern char vdso32_start[], vdso32_end[];
static struct vm_special_mapping vvar_mapping;
@@ -37,18 +37,6 @@
VVAR_NR_PAGES,
};
-unsigned int __read_mostly vdso_enabled = 1;
-
-static int __init vdso_setup(char *str)
-{
- bool enabled;
-
- if (!kstrtobool(str, &enabled))
- vdso_enabled = enabled;
- return 1;
-}
-__setup("vdso=", vdso_setup);
-
#ifdef CONFIG_TIME_NS
struct vdso_data *arch_get_vdso_data(void *vvar_page)
{
@@ -155,7 +143,12 @@
.fault = vvar_fault,
};
-static struct vm_special_mapping vdso_mapping = {
+static struct vm_special_mapping vdso64_mapping = {
+ .name = "[vdso]",
+ .mremap = vdso_mremap,
+};
+
+static struct vm_special_mapping vdso32_mapping = {
.name = "[vdso]",
.mremap = vdso_mremap,
};
@@ -171,16 +164,22 @@
{
unsigned long vdso_text_len, vdso_mapping_len;
unsigned long vvar_start, vdso_text_start;
+ struct vm_special_mapping *vdso_mapping;
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
int rc;
BUILD_BUG_ON(VVAR_NR_PAGES != __VVAR_PAGES);
- if (!vdso_enabled || is_compat_task())
- return 0;
if (mmap_write_lock_killable(mm))
return -EINTR;
- vdso_text_len = vdso_pages << PAGE_SHIFT;
+
+ if (is_compat_task()) {
+ vdso_text_len = vdso32_end - vdso32_start;
+ vdso_mapping = &vdso32_mapping;
+ } else {
+ vdso_text_len = vdso64_end - vdso64_start;
+ vdso_mapping = &vdso64_mapping;
+ }
vdso_mapping_len = vdso_text_len + VVAR_NR_PAGES * PAGE_SIZE;
vvar_start = get_unmapped_area(NULL, 0, vdso_mapping_len, 0, 0);
rc = vvar_start;
@@ -198,7 +197,7 @@
vma = _install_special_mapping(mm, vdso_text_start, vdso_text_len,
VM_READ|VM_EXEC|
VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
- &vdso_mapping);
+ vdso_mapping);
if (IS_ERR(vma)) {
do_munmap(mm, vvar_start, PAGE_SIZE, NULL);
rc = PTR_ERR(vma);
@@ -211,21 +210,25 @@
return rc;
}
-static int __init vdso_init(void)
+static struct page ** __init vdso_setup_pages(void *start, void *end)
{
- struct page **pages;
+ int pages = (end - start) >> PAGE_SHIFT;
+ struct page **pagelist;
int i;
- vdso_pages = (vdso64_end - vdso64_start) >> PAGE_SHIFT;
- pages = kcalloc(vdso_pages + 1, sizeof(struct page *), GFP_KERNEL);
- if (!pages) {
- vdso_enabled = 0;
- return -ENOMEM;
- }
- for (i = 0; i < vdso_pages; i++)
- pages[i] = virt_to_page(vdso64_start + i * PAGE_SIZE);
- pages[vdso_pages] = NULL;
- vdso_mapping.pages = pages;
+ pagelist = kcalloc(pages + 1, sizeof(struct page *), GFP_KERNEL);
+ if (!pagelist)
+ panic("%s: Cannot allocate page list for VDSO", __func__);
+ for (i = 0; i < pages; i++)
+ pagelist[i] = virt_to_page(start + i * PAGE_SIZE);
+ return pagelist;
+}
+
+static int __init vdso_init(void)
+{
+ vdso64_mapping.pages = vdso_setup_pages(vdso64_start, vdso64_end);
+ if (IS_ENABLED(CONFIG_COMPAT))
+ vdso32_mapping.pages = vdso_setup_pages(vdso32_start, vdso32_end);
return 0;
}
arch_initcall(vdso_init);
diff --git a/arch/s390/kernel/vdso32/.gitignore b/arch/s390/kernel/vdso32/.gitignore
new file mode 100644
index 0000000..5167384
--- /dev/null
+++ b/arch/s390/kernel/vdso32/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vdso32.lds
diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
new file mode 100644
index 0000000..b2349a3
--- /dev/null
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+# List of files in the vdso
+
+KCOV_INSTRUMENT := n
+ARCH_REL_TYPE_ABS := R_390_COPY|R_390_GLOB_DAT|R_390_JMP_SLOT|R_390_RELATIVE
+ARCH_REL_TYPE_ABS += R_390_GOT|R_390_PLT
+
+include $(srctree)/lib/vdso/Makefile
+obj-vdso32 = vdso_user_wrapper-32.o note-32.o
+
+# Build rules
+
+targets := $(obj-vdso32) vdso32.so vdso32.so.dbg
+obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
+
+KBUILD_AFLAGS += -DBUILD_VDSO
+KBUILD_CFLAGS += -DBUILD_VDSO -DDISABLE_BRANCH_PROFILING
+
+KBUILD_AFLAGS_32 := $(filter-out -m64,$(KBUILD_AFLAGS))
+KBUILD_AFLAGS_32 += -m31 -s
+
+KBUILD_CFLAGS_32 := $(filter-out -m64,$(KBUILD_CFLAGS))
+KBUILD_CFLAGS_32 += -m31 -fPIC -shared -fno-common -fno-builtin
+
+LDFLAGS_vdso32.so.dbg += -fPIC -shared -nostdlib -soname=linux-vdso32.so.1 \
+ --hash-style=both --build-id=sha1 -melf_s390 -T
+
+$(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
+$(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_32)
+
+obj-y += vdso32_wrapper.o
+CPPFLAGS_vdso32.lds += -P -C -U$(ARCH)
+
+# Disable gcov profiling, ubsan and kasan for VDSO code
+GCOV_PROFILE := n
+UBSAN_SANITIZE := n
+KASAN_SANITIZE := n
+
+# Force dependency (incbin is bad)
+$(obj)/vdso32_wrapper.o : $(obj)/vdso32.so
+
+$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) FORCE
+ $(call if_changed,ld)
+
+# strip rule for the .so file
+$(obj)/%.so: OBJCOPYFLAGS := -S
+$(obj)/%.so: $(obj)/%.so.dbg FORCE
+ $(call if_changed,objcopy)
+
+$(obj-vdso32): %-32.o: %.S FORCE
+ $(call if_changed_dep,vdso32as)
+
+# actual build commands
+quiet_cmd_vdso32as = VDSO32A $@
+ cmd_vdso32as = $(CC) $(a_flags) -c -o $@ $<
+quiet_cmd_vdso32cc = VDSO32C $@
+ cmd_vdso32cc = $(CC) $(c_flags) -c -o $@ $<
+
+# install commands for the unstripped file
+quiet_cmd_vdso_install = INSTALL $@
+ cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
+
+vdso32.so: $(obj)/vdso32.so.dbg
+ @mkdir -p $(MODLIB)/vdso
+ $(call cmd,vdso_install)
+
+vdso_install: vdso32.so
+
+# Generate VDSO offsets using helper script
+gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
+
+include/generated/vdso32-offsets.h: $(obj)/vdso32.so.dbg FORCE
+ $(call if_changed,vdsosym)
diff --git a/arch/s390/kernel/vdso32/gen_vdso_offsets.sh b/arch/s390/kernel/vdso32/gen_vdso_offsets.sh
new file mode 100755
index 0000000..9c4f951
--- /dev/null
+++ b/arch/s390/kernel/vdso32/gen_vdso_offsets.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+#
+# Match symbols in the DSO that look like VDSO_*; produce a header file
+# of constant offsets into the shared object.
+#
+# Doing this inside the Makefile will break the $(filter-out) function,
+# causing Kbuild to rebuild the vdso-offsets header file every time.
+#
+# Inspired by arm64 version.
+#
+
+LC_ALL=C
+sed -n 's/\([0-9a-f]*\) . __kernel_compat_\(.*\)/\#define vdso32_offset_\2\t0x\1/p'
diff --git a/arch/s390/kernel/vdso32/note.S b/arch/s390/kernel/vdso32/note.S
new file mode 100644
index 0000000..db19d06
--- /dev/null
+++ b/arch/s390/kernel/vdso32/note.S
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/uts.h>
+#include <linux/version.h>
+#include <linux/elfnote.h>
+
+ELFNOTE_START(Linux, 0, "a")
+ .long LINUX_VERSION_CODE
+ELFNOTE_END
diff --git a/arch/s390/kernel/vdso32/vdso32.lds.S b/arch/s390/kernel/vdso32/vdso32.lds.S
new file mode 100644
index 0000000..bff50b6a
--- /dev/null
+++ b/arch/s390/kernel/vdso32/vdso32.lds.S
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This is the infamous ld script for the 64 bits vdso
+ * library
+ */
+
+#include <asm/page.h>
+#include <asm/vdso.h>
+
+OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390")
+OUTPUT_ARCH(s390:31-bit)
+ENTRY(_start)
+
+SECTIONS
+{
+ PROVIDE(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE);
+#ifdef CONFIG_TIME_NS
+ PROVIDE(_timens_data = _vdso_data + PAGE_SIZE);
+#endif
+ . = VDSO_LBASE + SIZEOF_HEADERS;
+
+ .hash : { *(.hash) } :text
+ .gnu.hash : { *(.gnu.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .gnu.version : { *(.gnu.version) }
+ .gnu.version_d : { *(.gnu.version_d) }
+ .gnu.version_r : { *(.gnu.version_r) }
+
+ .note : { *(.note.*) } :text :note
+
+ . = ALIGN(16);
+ .text : {
+ *(.text .stub .text.* .gnu.linkonce.t.*)
+ } :text
+ PROVIDE(__etext = .);
+ PROVIDE(_etext = .);
+ PROVIDE(etext = .);
+
+ /*
+ * Other stuff is appended to the text segment:
+ */
+ .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+ .rodata1 : { *(.rodata1) }
+
+ .dynamic : { *(.dynamic) } :text :dynamic
+
+ .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr
+ .eh_frame : { KEEP (*(.eh_frame)) } :text
+ .gcc_except_table : { *(.gcc_except_table .gcc_except_table.*) }
+
+ .rela.dyn ALIGN(8) : { *(.rela.dyn) }
+ .got ALIGN(8) : { *(.got .toc) }
+
+ _end = .;
+ PROVIDE(end = .);
+
+ /*
+ * Stabs debugging sections are here too.
+ */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+
+ /*
+ * DWARF debug sections.
+ * Symbols in the DWARF debugging sections are relative to the
+ * beginning of the section so we begin them at 0.
+ */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+ /* DWARF 3 */
+ .debug_pubtypes 0 : { *(.debug_pubtypes) }
+ .debug_ranges 0 : { *(.debug_ranges) }
+ .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
+
+ /DISCARD/ : {
+ *(.note.GNU-stack)
+ *(.branch_lt)
+ *(.data .data.* .gnu.linkonce.d.* .sdata*)
+ *(.bss .sbss .dynbss .dynsbss)
+ }
+}
+
+/*
+ * Very old versions of ld do not recognize this name token; use the constant.
+ */
+#define PT_GNU_EH_FRAME 0x6474e550
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+ text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
+ dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+ note PT_NOTE FLAGS(4); /* PF_R */
+ eh_frame_hdr PT_GNU_EH_FRAME;
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+ VDSO_VERSION_STRING {
+ global:
+ /*
+ * Has to be there for the kernel to find
+ */
+ __kernel_compat_restart_syscall;
+ __kernel_compat_rt_sigreturn;
+ __kernel_compat_sigreturn;
+ local: *;
+ };
+}
diff --git a/arch/s390/kernel/vdso32/vdso32_wrapper.S b/arch/s390/kernel/vdso32/vdso32_wrapper.S
new file mode 100644
index 0000000..de2fb93
--- /dev/null
+++ b/arch/s390/kernel/vdso32/vdso32_wrapper.S
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+ __PAGE_ALIGNED_DATA
+
+ .globl vdso32_start, vdso32_end
+ .balign PAGE_SIZE
+vdso32_start:
+ .incbin "arch/s390/kernel/vdso32/vdso32.so"
+ .balign PAGE_SIZE
+vdso32_end:
+
+ .previous
diff --git a/arch/s390/kernel/vdso32/vdso_user_wrapper.S b/arch/s390/kernel/vdso32/vdso_user_wrapper.S
new file mode 100644
index 0000000..3f42f27
--- /dev/null
+++ b/arch/s390/kernel/vdso32/vdso_user_wrapper.S
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <asm/unistd.h>
+#include <asm/dwarf.h>
+
+.macro vdso_syscall func,syscall
+ .globl __kernel_compat_\func
+ .type __kernel_compat_\func,@function
+ .align 8
+__kernel_compat_\func:
+ CFI_STARTPROC
+ svc \syscall
+ /* Make sure we notice when a syscall returns, which shouldn't happen */
+ .word 0
+ CFI_ENDPROC
+ .size __kernel_compat_\func,.-__kernel_compat_\func
+.endm
+
+vdso_syscall restart_syscall,__NR_restart_syscall
+vdso_syscall sigreturn,__NR_sigreturn
+vdso_syscall rt_sigreturn,__NR_rt_sigreturn
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index a6e0fb6..2a2092c 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -74,3 +74,11 @@
$(call cmd,vdso_install)
vdso_install: vdso64.so
+
+# Generate VDSO offsets using helper script
+gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
+
+include/generated/vdso64-offsets.h: $(obj)/vdso64.so.dbg FORCE
+ $(call if_changed,vdsosym)
diff --git a/arch/s390/kernel/vdso64/gen_vdso_offsets.sh b/arch/s390/kernel/vdso64/gen_vdso_offsets.sh
new file mode 100755
index 0000000..37f05cb3
--- /dev/null
+++ b/arch/s390/kernel/vdso64/gen_vdso_offsets.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+#
+# Match symbols in the DSO that look like VDSO_*; produce a header file
+# of constant offsets into the shared object.
+#
+# Doing this inside the Makefile will break the $(filter-out) function,
+# causing Kbuild to rebuild the vdso-offsets header file every time.
+#
+# Inspired by arm64 version.
+#
+
+LC_ALL=C
+sed -n 's/\([0-9a-f]*\) . __kernel_\(.*\)/\#define vdso64_offset_\2\t0x\1/p'
diff --git a/arch/s390/kernel/vdso64/vdso64.lds.S b/arch/s390/kernel/vdso64/vdso64.lds.S
index 518f1ea4..d4fb336 100644
--- a/arch/s390/kernel/vdso64/vdso64.lds.S
+++ b/arch/s390/kernel/vdso64/vdso64.lds.S
@@ -17,7 +17,7 @@
#ifdef CONFIG_TIME_NS
PROVIDE(_timens_data = _vdso_data + PAGE_SIZE);
#endif
- . = VDSO64_LBASE + SIZEOF_HEADERS;
+ . = VDSO_LBASE + SIZEOF_HEADERS;
.hash : { *(.hash) } :text
.gnu.hash : { *(.gnu.hash) }
@@ -137,6 +137,9 @@
__kernel_clock_gettime;
__kernel_clock_getres;
__kernel_getcpu;
+ __kernel_restart_syscall;
+ __kernel_rt_sigreturn;
+ __kernel_sigreturn;
local: *;
};
}
diff --git a/arch/s390/kernel/vdso64/vdso_user_wrapper.S b/arch/s390/kernel/vdso64/vdso_user_wrapper.S
index f773505..97f0c0a 100644
--- a/arch/s390/kernel/vdso64/vdso_user_wrapper.S
+++ b/arch/s390/kernel/vdso64/vdso_user_wrapper.S
@@ -37,3 +37,20 @@
vdso_func clock_getres
vdso_func clock_gettime
vdso_func getcpu
+
+.macro vdso_syscall func,syscall
+ .globl __kernel_\func
+ .type __kernel_\func,@function
+ .align 8
+__kernel_\func:
+ CFI_STARTPROC
+ svc \syscall
+ /* Make sure we notice when a syscall returns, which shouldn't happen */
+ .word 0
+ CFI_ENDPROC
+ .size __kernel_\func,.-__kernel_\func
+.endm
+
+vdso_syscall restart_syscall,__NR_restart_syscall
+vdso_syscall sigreturn,__NR_sigreturn
+vdso_syscall rt_sigreturn,__NR_rt_sigreturn
diff --git a/arch/s390/lib/string.c b/arch/s390/lib/string.c
index ec5b76b..cfcdf76 100644
--- a/arch/s390/lib/string.c
+++ b/arch/s390/lib/string.c
@@ -162,7 +162,7 @@
" jo 0b\n"
"1: mvst %[dummy],%[src]\n"
" jo 1b\n"
- : [dummy] "=&a" (dummy), [dest] "+&a" (dest), [src] "+&a" (src)
+ : [dummy] "+&a" (dummy), [dest] "+&a" (dest), [src] "+&a" (src)
:
: "cc", "memory", "0");
return ret;
diff --git a/arch/s390/lib/test_unwind.c b/arch/s390/lib/test_unwind.c
index 2f32802..ecf327d 100644
--- a/arch/s390/lib/test_unwind.c
+++ b/arch/s390/lib/test_unwind.c
@@ -120,7 +120,7 @@
#define UWM_REGS 0x2 /* Pass regs to test_unwind(). */
#define UWM_SP 0x4 /* Pass sp to test_unwind(). */
#define UWM_CALLER 0x8 /* Unwind starting from caller. */
-#define UWM_SWITCH_STACK 0x10 /* Use CALL_ON_STACK. */
+#define UWM_SWITCH_STACK 0x10 /* Use call_on_stack. */
#define UWM_IRQ 0x20 /* Unwind from irq context. */
#define UWM_PGM 0x40 /* Unwind from program check handler. */
@@ -211,7 +211,8 @@
if (u->flags & UWM_SWITCH_STACK) {
local_irq_save(flags);
local_mcck_disable();
- rc = CALL_ON_STACK(unwindme_func3, S390_lowcore.nodat_stack, 1, u);
+ rc = call_on_stack(1, S390_lowcore.nodat_stack,
+ int, unwindme_func3, struct unwindme *, u);
local_mcck_enable();
local_irq_restore(flags);
return rc;
diff --git a/arch/s390/lib/uaccess.c b/arch/s390/lib/uaccess.c
index 67606d9..7ec8b1f 100644
--- a/arch/s390/lib/uaccess.c
+++ b/arch/s390/lib/uaccess.c
@@ -224,7 +224,7 @@
EX_TABLE(0b,3b)
: "+a" (size), "+a" (to), "+a" (from), "+a" (tmp1), "=a" (tmp2)
: [spec] "d" (0x810081UL)
- : "cc", "memory");
+ : "cc", "memory", "0");
return size;
}
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 8ae3dc5..e33c43b 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -285,26 +285,6 @@
(void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK));
}
-static noinline int signal_return(struct pt_regs *regs)
-{
- u16 instruction;
- int rc;
-
- rc = __get_user(instruction, (u16 __user *) regs->psw.addr);
- if (rc)
- return rc;
- if (instruction == 0x0a77) {
- set_pt_regs_flag(regs, PIF_SYSCALL);
- regs->int_code = 0x00040077;
- return 0;
- } else if (instruction == 0x0aad) {
- set_pt_regs_flag(regs, PIF_SYSCALL);
- regs->int_code = 0x000400ad;
- return 0;
- }
- return -EACCES;
-}
-
static noinline void do_fault_error(struct pt_regs *regs, int access,
vm_fault_t fault)
{
@@ -312,9 +292,6 @@
switch (fault) {
case VM_FAULT_BADACCESS:
- if (access == VM_EXEC && signal_return(regs) == 0)
- break;
- fallthrough;
case VM_FAULT_BADMAP:
/* Bad memory access. Check if it is kernel or user space. */
if (user_mode(regs)) {
@@ -792,6 +769,32 @@
struct page *page;
int rc;
+ /*
+ * bit 61 tells us if the address is valid, if it's not we
+ * have a major problem and should stop the kernel or send a
+ * SIGSEGV to the process. Unfortunately bit 61 is not
+ * reliable without the misc UV feature so we need to check
+ * for that as well.
+ */
+ if (test_bit_inv(BIT_UV_FEAT_MISC, &uv_info.uv_feature_indications) &&
+ !test_bit_inv(61, ®s->int_parm_long)) {
+ /*
+ * When this happens, userspace did something that it
+ * was not supposed to do, e.g. branching into secure
+ * memory. Trigger a segmentation fault.
+ */
+ if (user_mode(regs)) {
+ send_sig(SIGSEGV, current, 0);
+ return;
+ }
+
+ /*
+ * The kernel should never run into this case and we
+ * have no way out of this situation.
+ */
+ panic("Unexpected PGM 0x3d with TEID bit 61=0");
+ }
+
switch (get_fault_type(regs)) {
case USER_FAULT:
mm = current->mm;
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
index 1f1f906..a0f54bd 100644
--- a/arch/s390/mm/maccess.c
+++ b/arch/s390/mm/maccess.c
@@ -125,12 +125,18 @@
*/
int memcpy_real(void *dest, void *src, size_t count)
{
+ unsigned long _dest = (unsigned long)dest;
+ unsigned long _src = (unsigned long)src;
+ unsigned long _count = (unsigned long)count;
int rc;
if (S390_lowcore.nodat_stack != 0) {
preempt_disable();
- rc = CALL_ON_STACK(_memcpy_real, S390_lowcore.nodat_stack, 3,
- dest, src, count);
+ rc = call_on_stack(3, S390_lowcore.nodat_stack,
+ unsigned long, _memcpy_real,
+ unsigned long, _dest,
+ unsigned long, _src,
+ unsigned long, _count);
preempt_enable();
return rc;
}
@@ -139,8 +145,7 @@
* not set up yet. Just call _memcpy_real on the early boot
* stack
*/
- return _memcpy_real((unsigned long) dest,(unsigned long) src,
- (unsigned long) count);
+ return _memcpy_real(_dest, _src, _count);
}
/*
diff --git a/arch/sh/Kbuild b/arch/sh/Kbuild
new file mode 100644
index 0000000..48c2a09
--- /dev/null
+++ b/arch/sh/Kbuild
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += kernel/ mm/ boards/
+obj-$(CONFIG_SH_FPU_EMU) += math-emu/
+obj-$(CONFIG_USE_BUILTIN_DTB) += boot/dts/
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 44bcb80e..88ddb6f 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -116,11 +116,6 @@
head-y := arch/sh/kernel/head_32.o
-core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
-core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
-
-core-$(CONFIG_USE_BUILTIN_DTB) += arch/sh/boot/dts/
-
# Mach groups
machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index bee99e6..4e65245 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -58,9 +58,6 @@
head-y := arch/sparc/kernel/head_$(BITS).o
-# See arch/sparc/Kbuild for the core part of the kernel
-core-y += arch/sparc/
-
libs-y += arch/sparc/prom/
libs-y += arch/sparc/lib/
diff --git a/arch/sparc/kernel/syscalls/Makefile b/arch/sparc/kernel/syscalls/Makefile
index 0f2ea5b..d63f18d 100644
--- a/arch/sparc/kernel/syscalls/Makefile
+++ b/arch/sparc/kernel/syscalls/Makefile
@@ -10,25 +10,15 @@
systbl := $(srctree)/scripts/syscalltbl.sh
quiet_cmd_syshdr = SYSHDR $@
- cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr --abis $(abis) $< $@
+ cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr --abis common,$* $< $@
quiet_cmd_systbl = SYSTBL $@
- cmd_systbl = $(CONFIG_SHELL) $(systbl) --abis $(abis) $< $@
+ cmd_systbl = $(CONFIG_SHELL) $(systbl) --abis common,$* $< $@
-$(uapi)/unistd_32.h: abis := common,32
-$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
+$(uapi)/unistd_%.h: $(syscall) $(syshdr) FORCE
$(call if_changed,syshdr)
-$(uapi)/unistd_64.h: abis := common,64
-$(uapi)/unistd_64.h: $(syscall) $(syshdr) FORCE
- $(call if_changed,syshdr)
-
-$(kapi)/syscall_table_32.h: abis := common,32
-$(kapi)/syscall_table_32.h: $(syscall) $(systbl) FORCE
- $(call if_changed,systbl)
-
-$(kapi)/syscall_table_64.h: abis := common,64
-$(kapi)/syscall_table_64.h: $(syscall) $(systbl) FORCE
+$(kapi)/syscall_table_%.h: $(syscall) $(systbl) FORCE
$(call if_changed,systbl)
uapisyshdr-y += unistd_32.h unistd_64.h
diff --git a/arch/um/Kbuild b/arch/um/Kbuild
new file mode 100644
index 0000000..a4e40e5
--- /dev/null
+++ b/arch/um/Kbuild
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 53eceaf..307fd00 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -240,9 +240,6 @@
libs-y += arch/x86/lib/
-# See arch/x86/Kbuild for content of core part of the kernel
-core-y += arch/x86/
-
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
diff --git a/arch/xtensa/Kbuild b/arch/xtensa/Kbuild
new file mode 100644
index 0000000..a4e40e5
--- /dev/null
+++ b/arch/xtensa/Kbuild
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0-only
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index b7a5abe..a7da8ea 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -1058,7 +1058,7 @@
config PATA_IXP4XX_CF
tristate "IXP4XX Compact Flash support"
- depends on ARCH_IXP4XX
+ depends on ARCH_IXP4XX || COMPILE_TEST
help
This option enables support for a Compact Flash connected on
the ixp4xx expansion bus. This driver had been written for
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 43215a4..5881d64 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -17,6 +17,7 @@
#include <linux/libata.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/pata_ixp4xx_cf.h>
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
diff --git a/drivers/bus/qcom-ebi2.c b/drivers/bus/qcom-ebi2.c
index 0b8f53a..663c827 100644
--- a/drivers/bus/qcom-ebi2.c
+++ b/drivers/bus/qcom-ebi2.c
@@ -102,8 +102,8 @@
/**
* struct cs_data - struct with info on a chipselect setting
* @enable_mask: mask to enable the chipselect in the EBI2 config
- * @slow_cfg0: offset to XMEMC slow CS config
- * @fast_cfg1: offset to XMEMC fast CS config
+ * @slow_cfg: offset to XMEMC slow CS config
+ * @fast_cfg: offset to XMEMC fast CS config
*/
struct cs_data {
u32 enable_mask;
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index c11f12d..3f166c8 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -152,7 +152,7 @@
config HW_RANDOM_IXP4XX
tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support"
- depends on ARCH_IXP4XX
+ depends on ARCH_IXP4XX || COMPILE_TEST
default HW_RANDOM
help
This driver provides kernel-side support for the Pseudo-Random
diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c
index beec162..188854d 100644
--- a/drivers/char/hw_random/ixp4xx-rng.c
+++ b/drivers/char/hw_random/ixp4xx-rng.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* drivers/char/hw_random/ixp4xx-rng.c
*
@@ -8,23 +9,20 @@
* Copyright 2005 (c) MontaVista Software, Inc.
*
* Fixes by Michael Buesch
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/hw_random.h>
+#include <linux/of.h>
+#include <linux/soc/ixp4xx/cpu.h>
#include <asm/io.h>
-#include <mach/hardware.h>
-
static int ixp4xx_rng_data_read(struct hwrng *rng, u32 *buffer)
{
@@ -40,35 +38,40 @@
.data_read = ixp4xx_rng_data_read,
};
-static int __init ixp4xx_rng_init(void)
+static int ixp4xx_rng_probe(struct platform_device *pdev)
{
void __iomem * rng_base;
- int err;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
if (!cpu_is_ixp46x()) /* includes IXP455 */
return -ENOSYS;
- rng_base = ioremap(0x70002100, 4);
- if (!rng_base)
- return -ENOMEM;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rng_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(rng_base))
+ return PTR_ERR(rng_base);
+
ixp4xx_rng_ops.priv = (unsigned long)rng_base;
- err = hwrng_register(&ixp4xx_rng_ops);
- if (err)
- iounmap(rng_base);
-
- return err;
+ return devm_hwrng_register(dev, &ixp4xx_rng_ops);
}
-static void __exit ixp4xx_rng_exit(void)
-{
- void __iomem * rng_base = (void __iomem *)ixp4xx_rng_ops.priv;
+static const struct of_device_id ixp4xx_rng_of_match[] = {
+ {
+ .compatible = "intel,ixp46x-rng",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ixp4xx_rng_of_match);
- hwrng_unregister(&ixp4xx_rng_ops);
- iounmap(rng_base);
-}
-
-module_init(ixp4xx_rng_init);
-module_exit(ixp4xx_rng_exit);
+static struct platform_driver ixp4xx_rng_driver = {
+ .driver = {
+ .name = "ixp4xx-hwrandom",
+ .of_match_table = ixp4xx_rng_of_match,
+ },
+ .probe = ixp4xx_rng_probe,
+};
+module_platform_driver(ixp4xx_rng_driver);
MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
MODULE_DESCRIPTION("H/W Pseudo-Random Number Generator (RNG) driver for IXP45x/46x");
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 35fc5ee..98730aa 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -31,6 +31,10 @@
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
+/* Intermittent includes, delete this after v5.14-rc1 */
+#include <linux/soc/ixp4xx/cpu.h>
+#include <mach/ixp4xx-regs.h>
+
#define MAX_KEYLEN 32
/* hash: cfgword + 2 * digestlen; crypt: keylen + cfgword */
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index db0ea2d..1db738d 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -9,7 +9,7 @@
config ARM_SCMI_PROTOCOL
tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
- depends on MAILBOX
+ depends on MAILBOX || HAVE_ARM_SMCCC_DISCOVERY
help
ARM System Control and Management Interface (SCMI) protocol is a
set of operating system-independent software interfaces that are
@@ -296,6 +296,7 @@
other manufacturing data and also utilize the Entropy Bit Generator
for hardware random number generation.
+source "drivers/firmware/arm_ffa/Kconfig"
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 5e013b6..546ac8e 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -22,6 +22,7 @@
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o
+obj-y += arm_ffa/
obj-y += arm_scmi/
obj-y += broadcom/
obj-y += meson/
diff --git a/drivers/firmware/arm_ffa/Kconfig b/drivers/firmware/arm_ffa/Kconfig
new file mode 100644
index 0000000..5e3ae5c
--- /dev/null
+++ b/drivers/firmware/arm_ffa/Kconfig
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config ARM_FFA_TRANSPORT
+ tristate "Arm Firmware Framework for Armv8-A"
+ depends on OF
+ depends on ARM64
+ default n
+ help
+ This Firmware Framework(FF) for Arm A-profile processors describes
+ interfaces that standardize communication between the various
+ software images which includes communication between images in
+ the Secure world and Normal world. It also leverages the
+ virtualization extension to isolate software images provided
+ by an ecosystem of vendors from each other.
+
+ This driver provides interface for all the client drivers making
+ use of the features offered by ARM FF-A.
+
+config ARM_FFA_SMCCC
+ bool
+ default ARM_FFA_TRANSPORT
+ depends on ARM64 && HAVE_ARM_SMCCC_DISCOVERY
diff --git a/drivers/firmware/arm_ffa/Makefile b/drivers/firmware/arm_ffa/Makefile
new file mode 100644
index 0000000..9d9f375
--- /dev/null
+++ b/drivers/firmware/arm_ffa/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+ffa-bus-y = bus.o
+ffa-driver-y = driver.o
+ffa-transport-$(CONFIG_ARM_FFA_SMCCC) += smccc.o
+ffa-module-objs := $(ffa-bus-y) $(ffa-driver-y) $(ffa-transport-y)
+obj-$(CONFIG_ARM_FFA_TRANSPORT) = ffa-module.o
diff --git a/drivers/firmware/arm_ffa/bus.c b/drivers/firmware/arm_ffa/bus.c
new file mode 100644
index 0000000..83166e0
--- /dev/null
+++ b/drivers/firmware/arm_ffa/bus.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/arm_ffa.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "common.h"
+
+static int ffa_device_match(struct device *dev, struct device_driver *drv)
+{
+ const struct ffa_device_id *id_table;
+ struct ffa_device *ffa_dev;
+
+ id_table = to_ffa_driver(drv)->id_table;
+ ffa_dev = to_ffa_dev(dev);
+
+ while (!uuid_is_null(&id_table->uuid)) {
+ /*
+ * FF-A v1.0 doesn't provide discovery of UUIDs, just the
+ * partition IDs, so fetch the partitions IDs for this
+ * id_table UUID and assign the UUID to the device if the
+ * partition ID matches
+ */
+ if (uuid_is_null(&ffa_dev->uuid))
+ ffa_device_match_uuid(ffa_dev, &id_table->uuid);
+
+ if (uuid_equal(&ffa_dev->uuid, &id_table->uuid))
+ return 1;
+ id_table++;
+ }
+
+ return 0;
+}
+
+static int ffa_device_probe(struct device *dev)
+{
+ struct ffa_driver *ffa_drv = to_ffa_driver(dev->driver);
+ struct ffa_device *ffa_dev = to_ffa_dev(dev);
+
+ if (!ffa_device_match(dev, dev->driver))
+ return -ENODEV;
+
+ return ffa_drv->probe(ffa_dev);
+}
+
+static int ffa_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct ffa_device *ffa_dev = to_ffa_dev(dev);
+
+ return add_uevent_var(env, "MODALIAS=arm_ffa:%04x:%pUb",
+ ffa_dev->vm_id, &ffa_dev->uuid);
+}
+
+static ssize_t partition_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ffa_device *ffa_dev = to_ffa_dev(dev);
+
+ return sprintf(buf, "0x%04x\n", ffa_dev->vm_id);
+}
+static DEVICE_ATTR_RO(partition_id);
+
+static ssize_t uuid_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ffa_device *ffa_dev = to_ffa_dev(dev);
+
+ return sprintf(buf, "%pUb\n", &ffa_dev->uuid);
+}
+static DEVICE_ATTR_RO(uuid);
+
+static struct attribute *ffa_device_attributes_attrs[] = {
+ &dev_attr_partition_id.attr,
+ &dev_attr_uuid.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(ffa_device_attributes);
+
+struct bus_type ffa_bus_type = {
+ .name = "arm_ffa",
+ .match = ffa_device_match,
+ .probe = ffa_device_probe,
+ .uevent = ffa_device_uevent,
+ .dev_groups = ffa_device_attributes_groups,
+};
+EXPORT_SYMBOL_GPL(ffa_bus_type);
+
+int ffa_driver_register(struct ffa_driver *driver, struct module *owner,
+ const char *mod_name)
+{
+ int ret;
+
+ driver->driver.bus = &ffa_bus_type;
+ driver->driver.name = driver->name;
+ driver->driver.owner = owner;
+ driver->driver.mod_name = mod_name;
+
+ ret = driver_register(&driver->driver);
+ if (!ret)
+ pr_debug("registered new ffa driver %s\n", driver->name);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ffa_driver_register);
+
+void ffa_driver_unregister(struct ffa_driver *driver)
+{
+ driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL_GPL(ffa_driver_unregister);
+
+static void ffa_release_device(struct device *dev)
+{
+ struct ffa_device *ffa_dev = to_ffa_dev(dev);
+
+ kfree(ffa_dev);
+}
+
+static int __ffa_devices_unregister(struct device *dev, void *data)
+{
+ ffa_release_device(dev);
+
+ return 0;
+}
+
+static void ffa_devices_unregister(void)
+{
+ bus_for_each_dev(&ffa_bus_type, NULL, NULL,
+ __ffa_devices_unregister);
+}
+
+bool ffa_device_is_valid(struct ffa_device *ffa_dev)
+{
+ bool valid = false;
+ struct device *dev = NULL;
+ struct ffa_device *tmp_dev;
+
+ do {
+ dev = bus_find_next_device(&ffa_bus_type, dev);
+ tmp_dev = to_ffa_dev(dev);
+ if (tmp_dev == ffa_dev) {
+ valid = true;
+ break;
+ }
+ put_device(dev);
+ } while (dev);
+
+ put_device(dev);
+
+ return valid;
+}
+
+struct ffa_device *ffa_device_register(const uuid_t *uuid, int vm_id)
+{
+ int ret;
+ struct device *dev;
+ struct ffa_device *ffa_dev;
+
+ ffa_dev = kzalloc(sizeof(*ffa_dev), GFP_KERNEL);
+ if (!ffa_dev)
+ return NULL;
+
+ dev = &ffa_dev->dev;
+ dev->bus = &ffa_bus_type;
+ dev->release = ffa_release_device;
+ dev_set_name(&ffa_dev->dev, "arm-ffa-%04x", vm_id);
+
+ ffa_dev->vm_id = vm_id;
+ uuid_copy(&ffa_dev->uuid, uuid);
+
+ ret = device_register(&ffa_dev->dev);
+ if (ret) {
+ dev_err(dev, "unable to register device %s err=%d\n",
+ dev_name(dev), ret);
+ put_device(dev);
+ return NULL;
+ }
+
+ return ffa_dev;
+}
+EXPORT_SYMBOL_GPL(ffa_device_register);
+
+void ffa_device_unregister(struct ffa_device *ffa_dev)
+{
+ if (!ffa_dev)
+ return;
+
+ device_unregister(&ffa_dev->dev);
+}
+EXPORT_SYMBOL_GPL(ffa_device_unregister);
+
+int arm_ffa_bus_init(void)
+{
+ return bus_register(&ffa_bus_type);
+}
+
+void arm_ffa_bus_exit(void)
+{
+ ffa_devices_unregister();
+ bus_unregister(&ffa_bus_type);
+}
diff --git a/drivers/firmware/arm_ffa/common.h b/drivers/firmware/arm_ffa/common.h
new file mode 100644
index 0000000..d6eccf1
--- /dev/null
+++ b/drivers/firmware/arm_ffa/common.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2021 ARM Ltd.
+ */
+
+#ifndef _FFA_COMMON_H
+#define _FFA_COMMON_H
+
+#include <linux/arm_ffa.h>
+#include <linux/arm-smccc.h>
+#include <linux/err.h>
+
+typedef struct arm_smccc_1_2_regs ffa_value_t;
+
+typedef void (ffa_fn)(ffa_value_t, ffa_value_t *);
+
+int arm_ffa_bus_init(void);
+void arm_ffa_bus_exit(void);
+bool ffa_device_is_valid(struct ffa_device *ffa_dev);
+void ffa_device_match_uuid(struct ffa_device *ffa_dev, const uuid_t *uuid);
+
+#ifdef CONFIG_ARM_FFA_SMCCC
+int __init ffa_transport_init(ffa_fn **invoke_ffa_fn);
+#else
+static inline int __init ffa_transport_init(ffa_fn **invoke_ffa_fn)
+{
+ return -EOPNOTSUPP;
+}
+#endif
+
+#endif /* _FFA_COMMON_H */
diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c
new file mode 100644
index 0000000..b1edb4b
--- /dev/null
+++ b/drivers/firmware/arm_ffa/driver.c
@@ -0,0 +1,731 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Arm Firmware Framework for ARMv8-A(FFA) interface driver
+ *
+ * The Arm FFA specification[1] describes a software architecture to
+ * leverages the virtualization extension to isolate software images
+ * provided by an ecosystem of vendors from each other and describes
+ * interfaces that standardize communication between the various software
+ * images including communication between images in the Secure world and
+ * Normal world. Any Hypervisor could use the FFA interfaces to enable
+ * communication between VMs it manages.
+ *
+ * The Hypervisor a.k.a Partition managers in FFA terminology can assign
+ * system resources(Memory regions, Devices, CPU cycles) to the partitions
+ * and manage isolation amongst them.
+ *
+ * [1] https://developer.arm.com/docs/den0077/latest
+ *
+ * Copyright (C) 2021 ARM Ltd.
+ */
+
+#define DRIVER_NAME "ARM FF-A"
+#define pr_fmt(fmt) DRIVER_NAME ": " fmt
+
+#include <linux/arm_ffa.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/uuid.h>
+
+#include "common.h"
+
+#define FFA_DRIVER_VERSION FFA_VERSION_1_0
+
+#define FFA_SMC(calling_convention, func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, (calling_convention), \
+ ARM_SMCCC_OWNER_STANDARD, (func_num))
+
+#define FFA_SMC_32(func_num) FFA_SMC(ARM_SMCCC_SMC_32, (func_num))
+#define FFA_SMC_64(func_num) FFA_SMC(ARM_SMCCC_SMC_64, (func_num))
+
+#define FFA_ERROR FFA_SMC_32(0x60)
+#define FFA_SUCCESS FFA_SMC_32(0x61)
+#define FFA_INTERRUPT FFA_SMC_32(0x62)
+#define FFA_VERSION FFA_SMC_32(0x63)
+#define FFA_FEATURES FFA_SMC_32(0x64)
+#define FFA_RX_RELEASE FFA_SMC_32(0x65)
+#define FFA_RXTX_MAP FFA_SMC_32(0x66)
+#define FFA_FN64_RXTX_MAP FFA_SMC_64(0x66)
+#define FFA_RXTX_UNMAP FFA_SMC_32(0x67)
+#define FFA_PARTITION_INFO_GET FFA_SMC_32(0x68)
+#define FFA_ID_GET FFA_SMC_32(0x69)
+#define FFA_MSG_POLL FFA_SMC_32(0x6A)
+#define FFA_MSG_WAIT FFA_SMC_32(0x6B)
+#define FFA_YIELD FFA_SMC_32(0x6C)
+#define FFA_RUN FFA_SMC_32(0x6D)
+#define FFA_MSG_SEND FFA_SMC_32(0x6E)
+#define FFA_MSG_SEND_DIRECT_REQ FFA_SMC_32(0x6F)
+#define FFA_FN64_MSG_SEND_DIRECT_REQ FFA_SMC_64(0x6F)
+#define FFA_MSG_SEND_DIRECT_RESP FFA_SMC_32(0x70)
+#define FFA_FN64_MSG_SEND_DIRECT_RESP FFA_SMC_64(0x70)
+#define FFA_MEM_DONATE FFA_SMC_32(0x71)
+#define FFA_FN64_MEM_DONATE FFA_SMC_64(0x71)
+#define FFA_MEM_LEND FFA_SMC_32(0x72)
+#define FFA_FN64_MEM_LEND FFA_SMC_64(0x72)
+#define FFA_MEM_SHARE FFA_SMC_32(0x73)
+#define FFA_FN64_MEM_SHARE FFA_SMC_64(0x73)
+#define FFA_MEM_RETRIEVE_REQ FFA_SMC_32(0x74)
+#define FFA_FN64_MEM_RETRIEVE_REQ FFA_SMC_64(0x74)
+#define FFA_MEM_RETRIEVE_RESP FFA_SMC_32(0x75)
+#define FFA_MEM_RELINQUISH FFA_SMC_32(0x76)
+#define FFA_MEM_RECLAIM FFA_SMC_32(0x77)
+#define FFA_MEM_OP_PAUSE FFA_SMC_32(0x78)
+#define FFA_MEM_OP_RESUME FFA_SMC_32(0x79)
+#define FFA_MEM_FRAG_RX FFA_SMC_32(0x7A)
+#define FFA_MEM_FRAG_TX FFA_SMC_32(0x7B)
+#define FFA_NORMAL_WORLD_RESUME FFA_SMC_32(0x7C)
+
+/*
+ * For some calls it is necessary to use SMC64 to pass or return 64-bit values.
+ * For such calls FFA_FN_NATIVE(name) will choose the appropriate
+ * (native-width) function ID.
+ */
+#ifdef CONFIG_64BIT
+#define FFA_FN_NATIVE(name) FFA_FN64_##name
+#else
+#define FFA_FN_NATIVE(name) FFA_##name
+#endif
+
+/* FFA error codes. */
+#define FFA_RET_SUCCESS (0)
+#define FFA_RET_NOT_SUPPORTED (-1)
+#define FFA_RET_INVALID_PARAMETERS (-2)
+#define FFA_RET_NO_MEMORY (-3)
+#define FFA_RET_BUSY (-4)
+#define FFA_RET_INTERRUPTED (-5)
+#define FFA_RET_DENIED (-6)
+#define FFA_RET_RETRY (-7)
+#define FFA_RET_ABORTED (-8)
+
+#define MAJOR_VERSION_MASK GENMASK(30, 16)
+#define MINOR_VERSION_MASK GENMASK(15, 0)
+#define MAJOR_VERSION(x) ((u16)(FIELD_GET(MAJOR_VERSION_MASK, (x))))
+#define MINOR_VERSION(x) ((u16)(FIELD_GET(MINOR_VERSION_MASK, (x))))
+#define PACK_VERSION_INFO(major, minor) \
+ (FIELD_PREP(MAJOR_VERSION_MASK, (major)) | \
+ FIELD_PREP(MINOR_VERSION_MASK, (minor)))
+#define FFA_VERSION_1_0 PACK_VERSION_INFO(1, 0)
+#define FFA_MIN_VERSION FFA_VERSION_1_0
+
+#define SENDER_ID_MASK GENMASK(31, 16)
+#define RECEIVER_ID_MASK GENMASK(15, 0)
+#define SENDER_ID(x) ((u16)(FIELD_GET(SENDER_ID_MASK, (x))))
+#define RECEIVER_ID(x) ((u16)(FIELD_GET(RECEIVER_ID_MASK, (x))))
+#define PACK_TARGET_INFO(s, r) \
+ (FIELD_PREP(SENDER_ID_MASK, (s)) | FIELD_PREP(RECEIVER_ID_MASK, (r)))
+
+/**
+ * FF-A specification mentions explicitly about '4K pages'. This should
+ * not be confused with the kernel PAGE_SIZE, which is the translation
+ * granule kernel is configured and may be one among 4K, 16K and 64K.
+ */
+#define FFA_PAGE_SIZE SZ_4K
+/*
+ * Keeping RX TX buffer size as 4K for now
+ * 64K may be preferred to keep it min a page in 64K PAGE_SIZE config
+ */
+#define RXTX_BUFFER_SIZE SZ_4K
+
+static ffa_fn *invoke_ffa_fn;
+
+static const int ffa_linux_errmap[] = {
+ /* better than switch case as long as return value is continuous */
+ 0, /* FFA_RET_SUCCESS */
+ -EOPNOTSUPP, /* FFA_RET_NOT_SUPPORTED */
+ -EINVAL, /* FFA_RET_INVALID_PARAMETERS */
+ -ENOMEM, /* FFA_RET_NO_MEMORY */
+ -EBUSY, /* FFA_RET_BUSY */
+ -EINTR, /* FFA_RET_INTERRUPTED */
+ -EACCES, /* FFA_RET_DENIED */
+ -EAGAIN, /* FFA_RET_RETRY */
+ -ECANCELED, /* FFA_RET_ABORTED */
+};
+
+static inline int ffa_to_linux_errno(int errno)
+{
+ if (errno < FFA_RET_SUCCESS && errno >= -ARRAY_SIZE(ffa_linux_errmap))
+ return ffa_linux_errmap[-errno];
+ return -EINVAL;
+}
+
+struct ffa_drv_info {
+ u32 version;
+ u16 vm_id;
+ struct mutex rx_lock; /* lock to protect Rx buffer */
+ struct mutex tx_lock; /* lock to protect Tx buffer */
+ void *rx_buffer;
+ void *tx_buffer;
+};
+
+static struct ffa_drv_info *drv_info;
+
+static int ffa_version_check(u32 *version)
+{
+ ffa_value_t ver;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_VERSION, .a1 = FFA_DRIVER_VERSION,
+ }, &ver);
+
+ if (ver.a0 == FFA_RET_NOT_SUPPORTED) {
+ pr_info("FFA_VERSION returned not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (ver.a0 < FFA_MIN_VERSION || ver.a0 > FFA_DRIVER_VERSION) {
+ pr_err("Incompatible version %d.%d found\n",
+ MAJOR_VERSION(ver.a0), MINOR_VERSION(ver.a0));
+ return -EINVAL;
+ }
+
+ *version = ver.a0;
+ pr_info("Version %d.%d found\n", MAJOR_VERSION(ver.a0),
+ MINOR_VERSION(ver.a0));
+ return 0;
+}
+
+static int ffa_rx_release(void)
+{
+ ffa_value_t ret;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_RX_RELEASE,
+ }, &ret);
+
+ if (ret.a0 == FFA_ERROR)
+ return ffa_to_linux_errno((int)ret.a2);
+
+ /* check for ret.a0 == FFA_RX_RELEASE ? */
+
+ return 0;
+}
+
+static int ffa_rxtx_map(phys_addr_t tx_buf, phys_addr_t rx_buf, u32 pg_cnt)
+{
+ ffa_value_t ret;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_FN_NATIVE(RXTX_MAP),
+ .a1 = tx_buf, .a2 = rx_buf, .a3 = pg_cnt,
+ }, &ret);
+
+ if (ret.a0 == FFA_ERROR)
+ return ffa_to_linux_errno((int)ret.a2);
+
+ return 0;
+}
+
+static int ffa_rxtx_unmap(u16 vm_id)
+{
+ ffa_value_t ret;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_RXTX_UNMAP, .a1 = PACK_TARGET_INFO(vm_id, 0),
+ }, &ret);
+
+ if (ret.a0 == FFA_ERROR)
+ return ffa_to_linux_errno((int)ret.a2);
+
+ return 0;
+}
+
+/* buffer must be sizeof(struct ffa_partition_info) * num_partitions */
+static int
+__ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3,
+ struct ffa_partition_info *buffer, int num_partitions)
+{
+ int count;
+ ffa_value_t partition_info;
+
+ mutex_lock(&drv_info->rx_lock);
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_PARTITION_INFO_GET,
+ .a1 = uuid0, .a2 = uuid1, .a3 = uuid2, .a4 = uuid3,
+ }, &partition_info);
+
+ if (partition_info.a0 == FFA_ERROR) {
+ mutex_unlock(&drv_info->rx_lock);
+ return ffa_to_linux_errno((int)partition_info.a2);
+ }
+
+ count = partition_info.a2;
+
+ if (buffer && count <= num_partitions)
+ memcpy(buffer, drv_info->rx_buffer, sizeof(*buffer) * count);
+
+ ffa_rx_release();
+
+ mutex_unlock(&drv_info->rx_lock);
+
+ return count;
+}
+
+/* buffer is allocated and caller must free the same if returned count > 0 */
+static int
+ffa_partition_probe(const uuid_t *uuid, struct ffa_partition_info **buffer)
+{
+ int count;
+ u32 uuid0_4[4];
+ struct ffa_partition_info *pbuf;
+
+ export_uuid((u8 *)uuid0_4, uuid);
+ count = __ffa_partition_info_get(uuid0_4[0], uuid0_4[1], uuid0_4[2],
+ uuid0_4[3], NULL, 0);
+ if (count <= 0)
+ return count;
+
+ pbuf = kcalloc(count, sizeof(*pbuf), GFP_KERNEL);
+ if (!pbuf)
+ return -ENOMEM;
+
+ count = __ffa_partition_info_get(uuid0_4[0], uuid0_4[1], uuid0_4[2],
+ uuid0_4[3], pbuf, count);
+ if (count <= 0)
+ kfree(pbuf);
+ else
+ *buffer = pbuf;
+
+ return count;
+}
+
+#define VM_ID_MASK GENMASK(15, 0)
+static int ffa_id_get(u16 *vm_id)
+{
+ ffa_value_t id;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_ID_GET,
+ }, &id);
+
+ if (id.a0 == FFA_ERROR)
+ return ffa_to_linux_errno((int)id.a2);
+
+ *vm_id = FIELD_GET(VM_ID_MASK, (id.a2));
+
+ return 0;
+}
+
+static int ffa_msg_send_direct_req(u16 src_id, u16 dst_id, bool mode_32bit,
+ struct ffa_send_direct_data *data)
+{
+ u32 req_id, resp_id, src_dst_ids = PACK_TARGET_INFO(src_id, dst_id);
+ ffa_value_t ret;
+
+ if (mode_32bit) {
+ req_id = FFA_MSG_SEND_DIRECT_REQ;
+ resp_id = FFA_MSG_SEND_DIRECT_RESP;
+ } else {
+ req_id = FFA_FN_NATIVE(MSG_SEND_DIRECT_REQ);
+ resp_id = FFA_FN_NATIVE(MSG_SEND_DIRECT_RESP);
+ }
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = req_id, .a1 = src_dst_ids, .a2 = 0,
+ .a3 = data->data0, .a4 = data->data1, .a5 = data->data2,
+ .a6 = data->data3, .a7 = data->data4,
+ }, &ret);
+
+ while (ret.a0 == FFA_INTERRUPT)
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_RUN, .a1 = ret.a1,
+ }, &ret);
+
+ if (ret.a0 == FFA_ERROR)
+ return ffa_to_linux_errno((int)ret.a2);
+
+ if (ret.a0 == resp_id) {
+ data->data0 = ret.a3;
+ data->data1 = ret.a4;
+ data->data2 = ret.a5;
+ data->data3 = ret.a6;
+ data->data4 = ret.a7;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int ffa_mem_first_frag(u32 func_id, phys_addr_t buf, u32 buf_sz,
+ u32 frag_len, u32 len, u64 *handle)
+{
+ ffa_value_t ret;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = func_id, .a1 = len, .a2 = frag_len,
+ .a3 = buf, .a4 = buf_sz,
+ }, &ret);
+
+ while (ret.a0 == FFA_MEM_OP_PAUSE)
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_MEM_OP_RESUME,
+ .a1 = ret.a1, .a2 = ret.a2,
+ }, &ret);
+
+ if (ret.a0 == FFA_ERROR)
+ return ffa_to_linux_errno((int)ret.a2);
+
+ if (ret.a0 != FFA_SUCCESS)
+ return -EOPNOTSUPP;
+
+ if (handle)
+ *handle = PACK_HANDLE(ret.a2, ret.a3);
+
+ return frag_len;
+}
+
+static int ffa_mem_next_frag(u64 handle, u32 frag_len)
+{
+ ffa_value_t ret;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_MEM_FRAG_TX,
+ .a1 = HANDLE_LOW(handle), .a2 = HANDLE_HIGH(handle),
+ .a3 = frag_len,
+ }, &ret);
+
+ while (ret.a0 == FFA_MEM_OP_PAUSE)
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_MEM_OP_RESUME,
+ .a1 = ret.a1, .a2 = ret.a2,
+ }, &ret);
+
+ if (ret.a0 == FFA_ERROR)
+ return ffa_to_linux_errno((int)ret.a2);
+
+ if (ret.a0 != FFA_MEM_FRAG_RX)
+ return -EOPNOTSUPP;
+
+ return ret.a3;
+}
+
+static int
+ffa_transmit_fragment(u32 func_id, phys_addr_t buf, u32 buf_sz, u32 frag_len,
+ u32 len, u64 *handle, bool first)
+{
+ if (!first)
+ return ffa_mem_next_frag(*handle, frag_len);
+
+ return ffa_mem_first_frag(func_id, buf, buf_sz, frag_len, len, handle);
+}
+
+static u32 ffa_get_num_pages_sg(struct scatterlist *sg)
+{
+ u32 num_pages = 0;
+
+ do {
+ num_pages += sg->length / FFA_PAGE_SIZE;
+ } while ((sg = sg_next(sg)));
+
+ return num_pages;
+}
+
+static int
+ffa_setup_and_transmit(u32 func_id, void *buffer, u32 max_fragsize,
+ struct ffa_mem_ops_args *args)
+{
+ int rc = 0;
+ bool first = true;
+ phys_addr_t addr = 0;
+ struct ffa_composite_mem_region *composite;
+ struct ffa_mem_region_addr_range *constituents;
+ struct ffa_mem_region_attributes *ep_mem_access;
+ struct ffa_mem_region *mem_region = buffer;
+ u32 idx, frag_len, length, buf_sz = 0, num_entries = sg_nents(args->sg);
+
+ mem_region->tag = args->tag;
+ mem_region->flags = args->flags;
+ mem_region->sender_id = drv_info->vm_id;
+ mem_region->attributes = FFA_MEM_NORMAL | FFA_MEM_WRITE_BACK |
+ FFA_MEM_INNER_SHAREABLE;
+ ep_mem_access = &mem_region->ep_mem_access[0];
+
+ for (idx = 0; idx < args->nattrs; idx++, ep_mem_access++) {
+ ep_mem_access->receiver = args->attrs[idx].receiver;
+ ep_mem_access->attrs = args->attrs[idx].attrs;
+ ep_mem_access->composite_off = COMPOSITE_OFFSET(args->nattrs);
+ }
+ mem_region->ep_count = args->nattrs;
+
+ composite = buffer + COMPOSITE_OFFSET(args->nattrs);
+ composite->total_pg_cnt = ffa_get_num_pages_sg(args->sg);
+ composite->addr_range_cnt = num_entries;
+
+ length = COMPOSITE_CONSTITUENTS_OFFSET(args->nattrs, num_entries);
+ frag_len = COMPOSITE_CONSTITUENTS_OFFSET(args->nattrs, 0);
+ if (frag_len > max_fragsize)
+ return -ENXIO;
+
+ if (!args->use_txbuf) {
+ addr = virt_to_phys(buffer);
+ buf_sz = max_fragsize / FFA_PAGE_SIZE;
+ }
+
+ constituents = buffer + frag_len;
+ idx = 0;
+ do {
+ if (frag_len == max_fragsize) {
+ rc = ffa_transmit_fragment(func_id, addr, buf_sz,
+ frag_len, length,
+ &args->g_handle, first);
+ if (rc < 0)
+ return -ENXIO;
+
+ first = false;
+ idx = 0;
+ frag_len = 0;
+ constituents = buffer;
+ }
+
+ if ((void *)constituents - buffer > max_fragsize) {
+ pr_err("Memory Region Fragment > Tx Buffer size\n");
+ return -EFAULT;
+ }
+
+ constituents->address = sg_phys(args->sg);
+ constituents->pg_cnt = args->sg->length / FFA_PAGE_SIZE;
+ constituents++;
+ frag_len += sizeof(struct ffa_mem_region_addr_range);
+ } while ((args->sg = sg_next(args->sg)));
+
+ return ffa_transmit_fragment(func_id, addr, buf_sz, frag_len,
+ length, &args->g_handle, first);
+}
+
+static int ffa_memory_ops(u32 func_id, struct ffa_mem_ops_args *args)
+{
+ int ret;
+ void *buffer;
+
+ if (!args->use_txbuf) {
+ buffer = alloc_pages_exact(RXTX_BUFFER_SIZE, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+ } else {
+ buffer = drv_info->tx_buffer;
+ mutex_lock(&drv_info->tx_lock);
+ }
+
+ ret = ffa_setup_and_transmit(func_id, buffer, RXTX_BUFFER_SIZE, args);
+
+ if (args->use_txbuf)
+ mutex_unlock(&drv_info->tx_lock);
+ else
+ free_pages_exact(buffer, RXTX_BUFFER_SIZE);
+
+ return ret < 0 ? ret : 0;
+}
+
+static int ffa_memory_reclaim(u64 g_handle, u32 flags)
+{
+ ffa_value_t ret;
+
+ invoke_ffa_fn((ffa_value_t){
+ .a0 = FFA_MEM_RECLAIM,
+ .a1 = HANDLE_LOW(g_handle), .a2 = HANDLE_HIGH(g_handle),
+ .a3 = flags,
+ }, &ret);
+
+ if (ret.a0 == FFA_ERROR)
+ return ffa_to_linux_errno((int)ret.a2);
+
+ return 0;
+}
+
+static u32 ffa_api_version_get(void)
+{
+ return drv_info->version;
+}
+
+static int ffa_partition_info_get(const char *uuid_str,
+ struct ffa_partition_info *buffer)
+{
+ int count;
+ uuid_t uuid;
+ struct ffa_partition_info *pbuf;
+
+ if (uuid_parse(uuid_str, &uuid)) {
+ pr_err("invalid uuid (%s)\n", uuid_str);
+ return -ENODEV;
+ }
+
+ count = ffa_partition_probe(&uuid_null, &pbuf);
+ if (count <= 0)
+ return -ENOENT;
+
+ memcpy(buffer, pbuf, sizeof(*pbuf) * count);
+ kfree(pbuf);
+ return 0;
+}
+
+static void ffa_mode_32bit_set(struct ffa_device *dev)
+{
+ dev->mode_32bit = true;
+}
+
+static int ffa_sync_send_receive(struct ffa_device *dev,
+ struct ffa_send_direct_data *data)
+{
+ return ffa_msg_send_direct_req(drv_info->vm_id, dev->vm_id,
+ dev->mode_32bit, data);
+}
+
+static int
+ffa_memory_share(struct ffa_device *dev, struct ffa_mem_ops_args *args)
+{
+ if (dev->mode_32bit)
+ return ffa_memory_ops(FFA_MEM_SHARE, args);
+
+ return ffa_memory_ops(FFA_FN_NATIVE(MEM_SHARE), args);
+}
+
+static const struct ffa_dev_ops ffa_ops = {
+ .api_version_get = ffa_api_version_get,
+ .partition_info_get = ffa_partition_info_get,
+ .mode_32bit_set = ffa_mode_32bit_set,
+ .sync_send_receive = ffa_sync_send_receive,
+ .memory_reclaim = ffa_memory_reclaim,
+ .memory_share = ffa_memory_share,
+};
+
+const struct ffa_dev_ops *ffa_dev_ops_get(struct ffa_device *dev)
+{
+ if (ffa_device_is_valid(dev))
+ return &ffa_ops;
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(ffa_dev_ops_get);
+
+void ffa_device_match_uuid(struct ffa_device *ffa_dev, const uuid_t *uuid)
+{
+ int count, idx;
+ struct ffa_partition_info *pbuf, *tpbuf;
+
+ count = ffa_partition_probe(uuid, &pbuf);
+ if (count <= 0)
+ return;
+
+ for (idx = 0, tpbuf = pbuf; idx < count; idx++, tpbuf++)
+ if (tpbuf->id == ffa_dev->vm_id)
+ uuid_copy(&ffa_dev->uuid, uuid);
+ kfree(pbuf);
+}
+
+static void ffa_setup_partitions(void)
+{
+ int count, idx;
+ struct ffa_device *ffa_dev;
+ struct ffa_partition_info *pbuf, *tpbuf;
+
+ count = ffa_partition_probe(&uuid_null, &pbuf);
+ if (count <= 0) {
+ pr_info("%s: No partitions found, error %d\n", __func__, count);
+ return;
+ }
+
+ for (idx = 0, tpbuf = pbuf; idx < count; idx++, tpbuf++) {
+ /* Note that the &uuid_null parameter will require
+ * ffa_device_match() to find the UUID of this partition id
+ * with help of ffa_device_match_uuid(). Once the FF-A spec
+ * is updated to provide correct UUID here for each partition
+ * as part of the discovery API, we need to pass the
+ * discovered UUID here instead.
+ */
+ ffa_dev = ffa_device_register(&uuid_null, tpbuf->id);
+ if (!ffa_dev) {
+ pr_err("%s: failed to register partition ID 0x%x\n",
+ __func__, tpbuf->id);
+ continue;
+ }
+
+ ffa_dev_set_drvdata(ffa_dev, drv_info);
+ }
+ kfree(pbuf);
+}
+
+static int __init ffa_init(void)
+{
+ int ret;
+
+ ret = ffa_transport_init(&invoke_ffa_fn);
+ if (ret)
+ return ret;
+
+ ret = arm_ffa_bus_init();
+ if (ret)
+ return ret;
+
+ drv_info = kzalloc(sizeof(*drv_info), GFP_KERNEL);
+ if (!drv_info) {
+ ret = -ENOMEM;
+ goto ffa_bus_exit;
+ }
+
+ ret = ffa_version_check(&drv_info->version);
+ if (ret)
+ goto free_drv_info;
+
+ if (ffa_id_get(&drv_info->vm_id)) {
+ pr_err("failed to obtain VM id for self\n");
+ ret = -ENODEV;
+ goto free_drv_info;
+ }
+
+ drv_info->rx_buffer = alloc_pages_exact(RXTX_BUFFER_SIZE, GFP_KERNEL);
+ if (!drv_info->rx_buffer) {
+ ret = -ENOMEM;
+ goto free_pages;
+ }
+
+ drv_info->tx_buffer = alloc_pages_exact(RXTX_BUFFER_SIZE, GFP_KERNEL);
+ if (!drv_info->tx_buffer) {
+ ret = -ENOMEM;
+ goto free_pages;
+ }
+
+ ret = ffa_rxtx_map(virt_to_phys(drv_info->tx_buffer),
+ virt_to_phys(drv_info->rx_buffer),
+ RXTX_BUFFER_SIZE / FFA_PAGE_SIZE);
+ if (ret) {
+ pr_err("failed to register FFA RxTx buffers\n");
+ goto free_pages;
+ }
+
+ mutex_init(&drv_info->rx_lock);
+ mutex_init(&drv_info->tx_lock);
+
+ ffa_setup_partitions();
+
+ return 0;
+free_pages:
+ if (drv_info->tx_buffer)
+ free_pages_exact(drv_info->tx_buffer, RXTX_BUFFER_SIZE);
+ free_pages_exact(drv_info->rx_buffer, RXTX_BUFFER_SIZE);
+free_drv_info:
+ kfree(drv_info);
+ffa_bus_exit:
+ arm_ffa_bus_exit();
+ return ret;
+}
+subsys_initcall(ffa_init);
+
+static void __exit ffa_exit(void)
+{
+ ffa_rxtx_unmap(drv_info->vm_id);
+ free_pages_exact(drv_info->tx_buffer, RXTX_BUFFER_SIZE);
+ free_pages_exact(drv_info->rx_buffer, RXTX_BUFFER_SIZE);
+ kfree(drv_info);
+ arm_ffa_bus_exit();
+}
+module_exit(ffa_exit);
+
+MODULE_ALIAS("arm-ffa");
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("Arm FF-A interface driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/arm_ffa/smccc.c b/drivers/firmware/arm_ffa/smccc.c
new file mode 100644
index 0000000..4d85bff
--- /dev/null
+++ b/drivers/firmware/arm_ffa/smccc.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 ARM Ltd.
+ */
+
+#include <linux/printk.h>
+
+#include "common.h"
+
+static void __arm_ffa_fn_smc(ffa_value_t args, ffa_value_t *res)
+{
+ arm_smccc_1_2_smc(&args, res);
+}
+
+static void __arm_ffa_fn_hvc(ffa_value_t args, ffa_value_t *res)
+{
+ arm_smccc_1_2_hvc(&args, res);
+}
+
+int __init ffa_transport_init(ffa_fn **invoke_ffa_fn)
+{
+ enum arm_smccc_conduit conduit;
+
+ if (arm_smccc_get_version() < ARM_SMCCC_VERSION_1_2)
+ return -EOPNOTSUPP;
+
+ conduit = arm_smccc_1_1_get_conduit();
+ if (conduit == SMCCC_CONDUIT_NONE) {
+ pr_err("%s: invalid SMCCC conduit\n", __func__);
+ return -EOPNOTSUPP;
+ }
+
+ if (conduit == SMCCC_CONDUIT_SMC)
+ *invoke_ffa_fn = __arm_ffa_fn_smc;
+ else
+ *invoke_ffa_fn = __arm_ffa_fn_hvc;
+
+ return 0;
+}
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 228bf4a7..8685619 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -331,7 +331,7 @@
};
extern const struct scmi_desc scmi_mailbox_desc;
-#ifdef CONFIG_HAVE_ARM_SMCCC
+#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
extern const struct scmi_desc scmi_smc_desc;
#endif
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 66eb3f0..66e5e69 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -241,7 +241,6 @@
xfer = &minfo->xfer_block[xfer_id];
xfer->hdr.seq = xfer_id;
- reinit_completion(&xfer->done);
xfer->transfer_id = atomic_inc_return(&transfer_last_id);
return xfer;
@@ -335,6 +334,10 @@
return;
}
+ /* rx.len could be shrunk in the sync do_xfer, so reset to maxsz */
+ if (msg_type == MSG_TYPE_DELAYED_RESP)
+ xfer->rx.len = info->desc->max_msg_size;
+
scmi_dump_header_dbg(dev, &xfer->hdr);
info->desc->ops->fetch_response(cinfo, xfer);
@@ -429,11 +432,12 @@
struct scmi_chan_info *cinfo;
/*
- * Re-instate protocol id here from protocol handle so that cannot be
+ * Initialise protocol id now from protocol handle to avoid it being
* overridden by mistake (or malice) by the protocol code mangling with
- * the scmi_xfer structure.
+ * the scmi_xfer structure prior to this.
*/
xfer->hdr.protocol_id = pi->proto->id;
+ reinit_completion(&xfer->done);
cinfo = idr_find(&info->tx_idr, xfer->hdr.protocol_id);
if (unlikely(!cinfo))
@@ -505,16 +509,17 @@
struct scmi_xfer *xfer)
{
int ret, timeout = msecs_to_jiffies(SCMI_MAX_RESPONSE_TIMEOUT);
- const struct scmi_protocol_instance *pi = ph_to_pi(ph);
DECLARE_COMPLETION_ONSTACK(async_response);
- xfer->hdr.protocol_id = pi->proto->id;
-
xfer->async_done = &async_response;
ret = do_xfer(ph, xfer);
- if (!ret && !wait_for_completion_timeout(xfer->async_done, timeout))
- ret = -ETIMEDOUT;
+ if (!ret) {
+ if (!wait_for_completion_timeout(xfer->async_done, timeout))
+ ret = -ETIMEDOUT;
+ else if (xfer->hdr.status)
+ ret = scmi_to_linux_errno(xfer->hdr.status);
+ }
xfer->async_done = NULL;
return ret;
@@ -561,7 +566,6 @@
xfer->tx.len = tx_size;
xfer->rx.len = rx_size ? : info->desc->max_msg_size;
xfer->hdr.id = msg_id;
- xfer->hdr.protocol_id = pi->proto->id;
xfer->hdr.poll_completion = false;
*p = xfer;
@@ -1567,7 +1571,9 @@
/* Each compatible listed below must have descriptor associated with it */
static const struct of_device_id scmi_of_match[] = {
+#ifdef CONFIG_MAILBOX
{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+#endif
#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
#endif
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
index 4626404..e3dcb58 100644
--- a/drivers/firmware/arm_scmi/mailbox.c
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -69,6 +69,9 @@
return -ENOMEM;
shmem = of_parse_phandle(cdev->of_node, "shmem", idx);
+ if (!of_device_is_compatible(shmem, "arm,scmi-shmem"))
+ return -ENXIO;
+
ret = of_address_to_resource(shmem, 0, &res);
of_node_put(shmem);
if (ret) {
diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
index 9d36d5c..4371fdc 100644
--- a/drivers/firmware/arm_scmi/scmi_pm_domain.c
+++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c
@@ -8,6 +8,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/pm_clock.h>
#include <linux/pm_domain.h>
#include <linux/scmi_protocol.h>
@@ -52,6 +53,27 @@
return scmi_pd_power(domain, false);
}
+static int scmi_pd_attach_dev(struct generic_pm_domain *pd, struct device *dev)
+{
+ int ret;
+
+ ret = pm_clk_create(dev);
+ if (ret)
+ return ret;
+
+ ret = of_pm_clk_add_clks(dev);
+ if (ret >= 0)
+ return 0;
+
+ pm_clk_destroy(dev);
+ return ret;
+}
+
+static void scmi_pd_detach_dev(struct generic_pm_domain *pd, struct device *dev)
+{
+ pm_clk_destroy(dev);
+}
+
static int scmi_pm_domain_probe(struct scmi_device *sdev)
{
int num_domains, i;
@@ -102,6 +124,10 @@
scmi_pd->genpd.name = scmi_pd->name;
scmi_pd->genpd.power_off = scmi_pd_power_off;
scmi_pd->genpd.power_on = scmi_pd_power_on;
+ scmi_pd->genpd.attach_dev = scmi_pd_attach_dev;
+ scmi_pd->genpd.detach_dev = scmi_pd_detach_dev;
+ scmi_pd->genpd.flags = GENPD_FLAG_PM_CLK |
+ GENPD_FLAG_ACTIVE_WAKEUP;
pm_genpd_init(&scmi_pd->genpd, NULL,
state == SCMI_POWER_STATE_GENERIC_OFF);
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
index fcbe267..bed5596 100644
--- a/drivers/firmware/arm_scmi/smc.c
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -76,6 +76,9 @@
return -ENOMEM;
np = of_parse_phandle(cdev->of_node, "shmem", 0);
+ if (!of_device_is_compatible(np, "arm,scmi-shmem"))
+ return -ENXIO;
+
ret = of_address_to_resource(np, 0, &res);
of_node_put(np);
if (ret) {
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 4ceba5e..ddf0b9f 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -899,6 +899,14 @@
{},
};
+static const struct of_device_id shmem_of_match[] __maybe_unused = {
+ { .compatible = "amlogic,meson-gxbb-scp-shmem", },
+ { .compatible = "amlogic,meson-axg-scp-shmem", },
+ { .compatible = "arm,juno-scp-shmem", },
+ { .compatible = "arm,scp-shmem", },
+ { }
+};
+
static int scpi_probe(struct platform_device *pdev)
{
int count, idx, ret;
@@ -935,6 +943,9 @@
struct mbox_client *cl = &pchan->cl;
struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
+ if (!of_match_node(shmem_of_match, shmem))
+ return -ENXIO;
+
ret = of_address_to_resource(shmem, 0, &res);
of_node_put(shmem);
if (ret) {
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index ee9cb54..47ea2bd 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1281,6 +1281,9 @@
SCM_HAS_BUS_CLK)
},
{ .compatible = "qcom,scm-ipq4019" },
+ { .compatible = "qcom,scm-mdm9607", .data = (void *)(SCM_HAS_CORE_CLK |
+ SCM_HAS_IFACE_CLK |
+ SCM_HAS_BUS_CLK) },
{ .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK },
{ .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK },
{ .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK |
diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile
index 49c87e0..620cf3f 100644
--- a/drivers/firmware/tegra/Makefile
+++ b/drivers/firmware/tegra/Makefile
@@ -3,6 +3,7 @@
tegra-bpmp-$(CONFIG_ARCH_TEGRA_210_SOC) += bpmp-tegra210.o
tegra-bpmp-$(CONFIG_ARCH_TEGRA_186_SOC) += bpmp-tegra186.o
tegra-bpmp-$(CONFIG_ARCH_TEGRA_194_SOC) += bpmp-tegra186.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_234_SOC) += bpmp-tegra186.o
tegra-bpmp-$(CONFIG_DEBUG_FS) += bpmp-debugfs.o
obj-$(CONFIG_TEGRA_BPMP) += tegra-bpmp.o
obj-$(CONFIG_TEGRA_IVC) += ivc.o
diff --git a/drivers/firmware/tegra/bpmp-private.h b/drivers/firmware/tegra/bpmp-private.h
index 54d560c..182bfe3 100644
--- a/drivers/firmware/tegra/bpmp-private.h
+++ b/drivers/firmware/tegra/bpmp-private.h
@@ -24,7 +24,8 @@
};
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
- IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+ IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+ IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
extern const struct tegra_bpmp_ops tegra186_bpmp_ops;
#endif
#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
diff --git a/drivers/firmware/tegra/bpmp-tegra210.c b/drivers/firmware/tegra/bpmp-tegra210.c
index ae15940..c327540 100644
--- a/drivers/firmware/tegra/bpmp-tegra210.c
+++ b/drivers/firmware/tegra/bpmp-tegra210.c
@@ -210,7 +210,7 @@
priv->tx_irq_data = irq_get_irq_data(err);
if (!priv->tx_irq_data) {
dev_err(&pdev->dev, "failed to get IRQ data for TX IRQ\n");
- return err;
+ return -ENOENT;
}
err = platform_get_irq_byname(pdev, "rx");
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index 0742a90..5654c5e 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -809,7 +809,8 @@
};
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
- IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
+ IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+ IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
static const struct tegra_bpmp_soc tegra186_soc = {
.channels = {
.cpu_tx = {
diff --git a/drivers/firmware/turris-mox-rwtm.c b/drivers/firmware/turris-mox-rwtm.c
index 62f0d1a..c2d34dc 100644
--- a/drivers/firmware/turris-mox-rwtm.c
+++ b/drivers/firmware/turris-mox-rwtm.c
@@ -147,11 +147,14 @@
static int mox_get_status(enum mbox_cmd cmd, u32 retval)
{
- if (MBOX_STS_CMD(retval) != cmd ||
- MBOX_STS_ERROR(retval) != MBOX_STS_SUCCESS)
+ if (MBOX_STS_CMD(retval) != cmd)
return -EIO;
else if (MBOX_STS_ERROR(retval) == MBOX_STS_FAIL)
return -(int)MBOX_STS_VALUE(retval);
+ else if (MBOX_STS_ERROR(retval) == MBOX_STS_BADCMD)
+ return -ENOSYS;
+ else if (MBOX_STS_ERROR(retval) != MBOX_STS_SUCCESS)
+ return -EIO;
else
return MBOX_STS_VALUE(retval);
}
@@ -201,11 +204,14 @@
return ret;
ret = mox_get_status(MBOX_CMD_BOARD_INFO, reply->retval);
- if (ret < 0 && ret != -ENODATA) {
- return ret;
- } else if (ret == -ENODATA) {
+ if (ret == -ENODATA) {
dev_warn(rwtm->dev,
"Board does not have manufacturing information burned!\n");
+ } else if (ret == -ENOSYS) {
+ dev_notice(rwtm->dev,
+ "Firmware does not support the BOARD_INFO command\n");
+ } else if (ret < 0) {
+ return ret;
} else {
rwtm->serial_number = reply->status[1];
rwtm->serial_number <<= 32;
@@ -234,10 +240,13 @@
return ret;
ret = mox_get_status(MBOX_CMD_ECDSA_PUB_KEY, reply->retval);
- if (ret < 0 && ret != -ENODATA) {
- return ret;
- } else if (ret == -ENODATA) {
+ if (ret == -ENODATA) {
dev_warn(rwtm->dev, "Board has no public key burned!\n");
+ } else if (ret == -ENOSYS) {
+ dev_notice(rwtm->dev,
+ "Firmware does not support the ECDSA_PUB_KEY command\n");
+ } else if (ret < 0) {
+ return ret;
} else {
u32 *s = reply->status;
@@ -251,6 +260,27 @@
return 0;
}
+static int check_get_random_support(struct mox_rwtm *rwtm)
+{
+ struct armada_37xx_rwtm_tx_msg msg;
+ int ret;
+
+ msg.command = MBOX_CMD_GET_RANDOM;
+ msg.args[0] = 1;
+ msg.args[1] = rwtm->buf_phys;
+ msg.args[2] = 4;
+
+ ret = mbox_send_message(rwtm->mbox, &msg);
+ if (ret < 0)
+ return ret;
+
+ ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
+ if (ret < 0)
+ return ret;
+
+ return mox_get_status(MBOX_CMD_GET_RANDOM, rwtm->reply.retval);
+}
+
static int mox_hwrng_read(struct hwrng *rng, void *data, size_t max, bool wait)
{
struct mox_rwtm *rwtm = (struct mox_rwtm *) rng->priv;
@@ -488,6 +518,13 @@
if (ret < 0)
dev_warn(dev, "Cannot read board information: %i\n", ret);
+ ret = check_get_random_support(rwtm);
+ if (ret < 0) {
+ dev_notice(dev,
+ "Firmware does not support the GET_RANDOM command\n");
+ goto free_channel;
+ }
+
rwtm->hwrng.name = DRIVER_NAME "_hwrng";
rwtm->hwrng.read = mox_hwrng_read;
rwtm->hwrng.priv = (unsigned long) rwtm;
@@ -505,6 +542,8 @@
goto free_channel;
}
+ dev_info(dev, "HWRNG successfully registered\n");
+
return 0;
free_channel:
@@ -530,6 +569,7 @@
static const struct of_device_id turris_mox_rwtm_match[] = {
{ .compatible = "cznic,turris-mox-rwtm", },
+ { .compatible = "marvell,armada-3700-rwtm-firmware", },
{ },
};
diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 1f6ba42..879e5a6 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -195,7 +195,7 @@
};
/**
- * struct svc_i3c_i3c_dev_data - Device specific data
+ * struct svc_i3c_i2c_dev_data - Device specific data
* @index: Index in the master tables corresponding to this device
* @ibi: IBI slot index in the master structure
* @ibi_pool: IBI pool associated to this device
@@ -1448,7 +1448,6 @@
if (ret)
return ret;
- free_irq(master->irq, master);
clk_disable_unprepare(master->pclk);
clk_disable_unprepare(master->fclk);
clk_disable_unprepare(master->sclk);
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-impl.c b/drivers/iommu/arm/arm-smmu/arm-smmu-impl.c
index 136872e..9f465e1 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-impl.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-impl.c
@@ -211,7 +211,8 @@
if (of_property_read_bool(np, "calxeda,smmu-secure-config-access"))
smmu->impl = &calxeda_impl;
- if (of_device_is_compatible(np, "nvidia,tegra194-smmu"))
+ if (of_device_is_compatible(np, "nvidia,tegra194-smmu") ||
+ of_device_is_compatible(np, "nvidia,tegra186-smmu"))
return nvidia_smmu_impl_init(smmu);
smmu = qcom_smmu_impl_init(smmu);
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
index 2911744..01e9b50 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
@@ -7,6 +7,8 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <soc/tegra/mc.h>
+
#include "arm-smmu.h"
/*
@@ -15,18 +17,32 @@
* interleaved IOVA accesses across them and translates accesses from
* non-isochronous HW devices.
* Third one is used for translating accesses from isochronous HW devices.
+ *
+ * In addition, the SMMU driver needs to coordinate with the memory controller
+ * driver to ensure that the right SID override is programmed for any given
+ * memory client. This is necessary to allow for use-case such as seamlessly
+ * handing over the display controller configuration from the firmware to the
+ * kernel.
+ *
* This implementation supports programming of the two instances that must
- * be programmed identically.
- * The third instance usage is through standard arm-smmu driver itself and
- * is out of scope of this implementation.
+ * be programmed identically and takes care of invoking the memory controller
+ * driver for SID override programming after devices have been attached to an
+ * SMMU instance.
*/
-#define NUM_SMMU_INSTANCES 2
+#define MAX_SMMU_INSTANCES 2
struct nvidia_smmu {
- struct arm_smmu_device smmu;
- void __iomem *bases[NUM_SMMU_INSTANCES];
+ struct arm_smmu_device smmu;
+ void __iomem *bases[MAX_SMMU_INSTANCES];
+ unsigned int num_instances;
+ struct tegra_mc *mc;
};
+static inline struct nvidia_smmu *to_nvidia_smmu(struct arm_smmu_device *smmu)
+{
+ return container_of(smmu, struct nvidia_smmu, smmu);
+}
+
static inline void __iomem *nvidia_smmu_page(struct arm_smmu_device *smmu,
unsigned int inst, int page)
{
@@ -47,9 +63,10 @@
static void nvidia_smmu_write_reg(struct arm_smmu_device *smmu,
int page, int offset, u32 val)
{
+ struct nvidia_smmu *nvidia = to_nvidia_smmu(smmu);
unsigned int i;
- for (i = 0; i < NUM_SMMU_INSTANCES; i++) {
+ for (i = 0; i < nvidia->num_instances; i++) {
void __iomem *reg = nvidia_smmu_page(smmu, i, page) + offset;
writel_relaxed(val, reg);
@@ -67,9 +84,10 @@
static void nvidia_smmu_write_reg64(struct arm_smmu_device *smmu,
int page, int offset, u64 val)
{
+ struct nvidia_smmu *nvidia = to_nvidia_smmu(smmu);
unsigned int i;
- for (i = 0; i < NUM_SMMU_INSTANCES; i++) {
+ for (i = 0; i < nvidia->num_instances; i++) {
void __iomem *reg = nvidia_smmu_page(smmu, i, page) + offset;
writeq_relaxed(val, reg);
@@ -79,6 +97,7 @@
static void nvidia_smmu_tlb_sync(struct arm_smmu_device *smmu, int page,
int sync, int status)
{
+ struct nvidia_smmu *nvidia = to_nvidia_smmu(smmu);
unsigned int delay;
arm_smmu_writel(smmu, page, sync, 0);
@@ -90,7 +109,7 @@
u32 val = 0;
unsigned int i;
- for (i = 0; i < NUM_SMMU_INSTANCES; i++) {
+ for (i = 0; i < nvidia->num_instances; i++) {
void __iomem *reg;
reg = nvidia_smmu_page(smmu, i, page) + status;
@@ -112,9 +131,10 @@
static int nvidia_smmu_reset(struct arm_smmu_device *smmu)
{
+ struct nvidia_smmu *nvidia = to_nvidia_smmu(smmu);
unsigned int i;
- for (i = 0; i < NUM_SMMU_INSTANCES; i++) {
+ for (i = 0; i < nvidia->num_instances; i++) {
u32 val;
void __iomem *reg = nvidia_smmu_page(smmu, i, ARM_SMMU_GR0) +
ARM_SMMU_GR0_sGFSR;
@@ -157,8 +177,9 @@
unsigned int inst;
irqreturn_t ret = IRQ_NONE;
struct arm_smmu_device *smmu = dev;
+ struct nvidia_smmu *nvidia = to_nvidia_smmu(smmu);
- for (inst = 0; inst < NUM_SMMU_INSTANCES; inst++) {
+ for (inst = 0; inst < nvidia->num_instances; inst++) {
irqreturn_t irq_ret;
irq_ret = nvidia_smmu_global_fault_inst(irq, smmu, inst);
@@ -202,11 +223,13 @@
struct arm_smmu_device *smmu;
struct iommu_domain *domain = dev;
struct arm_smmu_domain *smmu_domain;
+ struct nvidia_smmu *nvidia;
smmu_domain = container_of(domain, struct arm_smmu_domain, domain);
smmu = smmu_domain->smmu;
+ nvidia = to_nvidia_smmu(smmu);
- for (inst = 0; inst < NUM_SMMU_INSTANCES; inst++) {
+ for (inst = 0; inst < nvidia->num_instances; inst++) {
irqreturn_t irq_ret;
/*
@@ -224,6 +247,17 @@
return ret;
}
+static void nvidia_smmu_probe_finalize(struct arm_smmu_device *smmu, struct device *dev)
+{
+ struct nvidia_smmu *nvidia = to_nvidia_smmu(smmu);
+ int err;
+
+ err = tegra_mc_probe_device(nvidia->mc, dev);
+ if (err < 0)
+ dev_err(smmu->dev, "memory controller probe failed for %s: %d\n",
+ dev_name(dev), err);
+}
+
static const struct arm_smmu_impl nvidia_smmu_impl = {
.read_reg = nvidia_smmu_read_reg,
.write_reg = nvidia_smmu_write_reg,
@@ -233,6 +267,11 @@
.tlb_sync = nvidia_smmu_tlb_sync,
.global_fault = nvidia_smmu_global_fault,
.context_fault = nvidia_smmu_context_fault,
+ .probe_finalize = nvidia_smmu_probe_finalize,
+};
+
+static const struct arm_smmu_impl nvidia_smmu_single_impl = {
+ .probe_finalize = nvidia_smmu_probe_finalize,
};
struct arm_smmu_device *nvidia_smmu_impl_init(struct arm_smmu_device *smmu)
@@ -241,23 +280,36 @@
struct device *dev = smmu->dev;
struct nvidia_smmu *nvidia_smmu;
struct platform_device *pdev = to_platform_device(dev);
+ unsigned int i;
nvidia_smmu = devm_krealloc(dev, smmu, sizeof(*nvidia_smmu), GFP_KERNEL);
if (!nvidia_smmu)
return ERR_PTR(-ENOMEM);
+ nvidia_smmu->mc = devm_tegra_memory_controller_get(dev);
+ if (IS_ERR(nvidia_smmu->mc))
+ return ERR_CAST(nvidia_smmu->mc);
+
/* Instance 0 is ioremapped by arm-smmu.c. */
nvidia_smmu->bases[0] = smmu->base;
+ nvidia_smmu->num_instances++;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res)
- return ERR_PTR(-ENODEV);
+ for (i = 1; i < MAX_SMMU_INSTANCES; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res)
+ break;
- nvidia_smmu->bases[1] = devm_ioremap_resource(dev, res);
- if (IS_ERR(nvidia_smmu->bases[1]))
- return ERR_CAST(nvidia_smmu->bases[1]);
+ nvidia_smmu->bases[i] = devm_ioremap_resource(dev, res);
+ if (IS_ERR(nvidia_smmu->bases[i]))
+ return ERR_CAST(nvidia_smmu->bases[i]);
- nvidia_smmu->smmu.impl = &nvidia_smmu_impl;
+ nvidia_smmu->num_instances++;
+ }
+
+ if (nvidia_smmu->num_instances == 1)
+ nvidia_smmu->smmu.impl = &nvidia_smmu_single_impl;
+ else
+ nvidia_smmu->smmu.impl = &nvidia_smmu_impl;
return &nvidia_smmu->smmu;
}
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index 1e98dc6..0a28183 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -376,9 +376,9 @@
if (client->swgroup != swgroup)
continue;
- value = smmu_readl(smmu, client->smmu.reg);
- value |= BIT(client->smmu.bit);
- smmu_writel(smmu, value, client->smmu.reg);
+ value = smmu_readl(smmu, client->regs.smmu.reg);
+ value |= BIT(client->regs.smmu.bit);
+ smmu_writel(smmu, value, client->regs.smmu.reg);
}
}
@@ -404,9 +404,9 @@
if (client->swgroup != swgroup)
continue;
- value = smmu_readl(smmu, client->smmu.reg);
- value &= ~BIT(client->smmu.bit);
- smmu_writel(smmu, value, client->smmu.reg);
+ value = smmu_readl(smmu, client->regs.smmu.reg);
+ value &= ~BIT(client->regs.smmu.bit);
+ smmu_writel(smmu, value, client->regs.smmu.reg);
}
}
@@ -1042,9 +1042,9 @@
const struct tegra_mc_client *client = &smmu->soc->clients[i];
const char *status;
- value = smmu_readl(smmu, client->smmu.reg);
+ value = smmu_readl(smmu, client->regs.smmu.reg);
- if (value & BIT(client->smmu.bit))
+ if (value & BIT(client->regs.smmu.bit))
status = "yes";
else
status = "no";
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 14386d0..c267283 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -600,8 +600,10 @@
child);
ret = atmel_ebi_dev_disable(ebi, child);
- if (ret)
+ if (ret) {
+ of_node_put(child);
return ret;
+ }
}
}
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index f7825ee..762d0c0 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -41,7 +41,6 @@
* @node: node in the device list
* @base: base address of memory-mapped IO registers.
* @dev: device pointer.
- * @addressing table with addressing information from the spec
* @regs_cache: An array of 'struct emif_regs' that stores
* calculated register values for different
* frequencies, to avoid re-calculating them on
@@ -61,7 +60,6 @@
unsigned long irq_state;
void __iomem *base;
struct device *dev;
- const struct lpddr2_addressing *addressing;
struct emif_regs *regs_cache[EMIF_MAX_NUM_FREQUENCIES];
struct emif_regs *curr_regs;
struct emif_platform_data *plat_data;
@@ -72,7 +70,6 @@
static struct emif_data *emif1;
static DEFINE_SPINLOCK(emif_lock);
static unsigned long irq_state;
-static u32 t_ck; /* DDR clock period in ps */
static LIST_HEAD(device_list);
#ifdef CONFIG_DEBUG_FS
@@ -170,15 +167,6 @@
#endif
/*
- * Calculate the period of DDR clock from frequency value
- */
-static void set_ddr_clk_period(u32 freq)
-{
- /* Divide 10^12 by frequency to get period in ps */
- t_ck = (u32)DIV_ROUND_UP_ULL(1000000000000ull, freq);
-}
-
-/*
* Get bus width used by EMIF. Note that this may be different from the
* bus width of the DDR devices used. For instance two 16-bit DDR devices
* may be connected to a given CS of EMIF. In this case bus width as far
@@ -196,19 +184,6 @@
return width;
}
-/*
- * Get the CL from SDRAM_CONFIG register
- */
-static u32 get_cl(struct emif_data *emif)
-{
- u32 cl;
- void __iomem *base = emif->base;
-
- cl = (readl(base + EMIF_SDRAM_CONFIG) & CL_MASK) >> CL_SHIFT;
-
- return cl;
-}
-
static void set_lpmode(struct emif_data *emif, u8 lpmode)
{
u32 temp;
@@ -328,203 +303,6 @@
return &lpddr2_jedec_addressing_table[index];
}
-/*
- * Find the the right timing table from the array of timing
- * tables of the device using DDR clock frequency
- */
-static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
- u32 freq)
-{
- u32 i, min, max, freq_nearest;
- const struct lpddr2_timings *timings = NULL;
- const struct lpddr2_timings *timings_arr = emif->plat_data->timings;
- struct device *dev = emif->dev;
-
- /* Start with a very high frequency - 1GHz */
- freq_nearest = 1000000000;
-
- /*
- * Find the timings table such that:
- * 1. the frequency range covers the required frequency(safe) AND
- * 2. the max_freq is closest to the required frequency(optimal)
- */
- for (i = 0; i < emif->plat_data->timings_arr_size; i++) {
- max = timings_arr[i].max_freq;
- min = timings_arr[i].min_freq;
- if ((freq >= min) && (freq <= max) && (max < freq_nearest)) {
- freq_nearest = max;
- timings = &timings_arr[i];
- }
- }
-
- if (!timings)
- dev_err(dev, "%s: couldn't find timings for - %dHz\n",
- __func__, freq);
-
- dev_dbg(dev, "%s: timings table: freq %d, speed bin freq %d\n",
- __func__, freq, freq_nearest);
-
- return timings;
-}
-
-static u32 get_sdram_ref_ctrl_shdw(u32 freq,
- const struct lpddr2_addressing *addressing)
-{
- u32 ref_ctrl_shdw = 0, val = 0, freq_khz, t_refi;
-
- /* Scale down frequency and t_refi to avoid overflow */
- freq_khz = freq / 1000;
- t_refi = addressing->tREFI_ns / 100;
-
- /*
- * refresh rate to be set is 'tREFI(in us) * freq in MHz
- * division by 10000 to account for change in units
- */
- val = t_refi * freq_khz / 10000;
- ref_ctrl_shdw |= val << REFRESH_RATE_SHIFT;
-
- return ref_ctrl_shdw;
-}
-
-static u32 get_sdram_tim_1_shdw(const struct lpddr2_timings *timings,
- const struct lpddr2_min_tck *min_tck,
- const struct lpddr2_addressing *addressing)
-{
- u32 tim1 = 0, val = 0;
-
- val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
- tim1 |= val << T_WTR_SHIFT;
-
- if (addressing->num_banks == B8)
- val = DIV_ROUND_UP(timings->tFAW, t_ck*4);
- else
- val = max(min_tck->tRRD, DIV_ROUND_UP(timings->tRRD, t_ck));
- tim1 |= (val - 1) << T_RRD_SHIFT;
-
- val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab, t_ck) - 1;
- tim1 |= val << T_RC_SHIFT;
-
- val = max(min_tck->tRASmin, DIV_ROUND_UP(timings->tRAS_min, t_ck));
- tim1 |= (val - 1) << T_RAS_SHIFT;
-
- val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
- tim1 |= val << T_WR_SHIFT;
-
- val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD, t_ck)) - 1;
- tim1 |= val << T_RCD_SHIFT;
-
- val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab, t_ck)) - 1;
- tim1 |= val << T_RP_SHIFT;
-
- return tim1;
-}
-
-static u32 get_sdram_tim_1_shdw_derated(const struct lpddr2_timings *timings,
- const struct lpddr2_min_tck *min_tck,
- const struct lpddr2_addressing *addressing)
-{
- u32 tim1 = 0, val = 0;
-
- val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
- tim1 = val << T_WTR_SHIFT;
-
- /*
- * tFAW is approximately 4 times tRRD. So add 1875*4 = 7500ps
- * to tFAW for de-rating
- */
- if (addressing->num_banks == B8) {
- val = DIV_ROUND_UP(timings->tFAW + 7500, 4 * t_ck) - 1;
- } else {
- val = DIV_ROUND_UP(timings->tRRD + 1875, t_ck);
- val = max(min_tck->tRRD, val) - 1;
- }
- tim1 |= val << T_RRD_SHIFT;
-
- val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab + 1875, t_ck);
- tim1 |= (val - 1) << T_RC_SHIFT;
-
- val = DIV_ROUND_UP(timings->tRAS_min + 1875, t_ck);
- val = max(min_tck->tRASmin, val) - 1;
- tim1 |= val << T_RAS_SHIFT;
-
- val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
- tim1 |= val << T_WR_SHIFT;
-
- val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD + 1875, t_ck));
- tim1 |= (val - 1) << T_RCD_SHIFT;
-
- val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab + 1875, t_ck));
- tim1 |= (val - 1) << T_RP_SHIFT;
-
- return tim1;
-}
-
-static u32 get_sdram_tim_2_shdw(const struct lpddr2_timings *timings,
- const struct lpddr2_min_tck *min_tck,
- const struct lpddr2_addressing *addressing,
- u32 type)
-{
- u32 tim2 = 0, val = 0;
-
- val = min_tck->tCKE - 1;
- tim2 |= val << T_CKE_SHIFT;
-
- val = max(min_tck->tRTP, DIV_ROUND_UP(timings->tRTP, t_ck)) - 1;
- tim2 |= val << T_RTP_SHIFT;
-
- /* tXSNR = tRFCab_ps + 10 ns(tRFCab_ps for LPDDR2). */
- val = DIV_ROUND_UP(addressing->tRFCab_ps + 10000, t_ck) - 1;
- tim2 |= val << T_XSNR_SHIFT;
-
- /* XSRD same as XSNR for LPDDR2 */
- tim2 |= val << T_XSRD_SHIFT;
-
- val = max(min_tck->tXP, DIV_ROUND_UP(timings->tXP, t_ck)) - 1;
- tim2 |= val << T_XP_SHIFT;
-
- return tim2;
-}
-
-static u32 get_sdram_tim_3_shdw(const struct lpddr2_timings *timings,
- const struct lpddr2_min_tck *min_tck,
- const struct lpddr2_addressing *addressing,
- u32 type, u32 ip_rev, u32 derated)
-{
- u32 tim3 = 0, val = 0, t_dqsck;
-
- val = timings->tRAS_max_ns / addressing->tREFI_ns - 1;
- val = val > 0xF ? 0xF : val;
- tim3 |= val << T_RAS_MAX_SHIFT;
-
- val = DIV_ROUND_UP(addressing->tRFCab_ps, t_ck) - 1;
- tim3 |= val << T_RFC_SHIFT;
-
- t_dqsck = (derated == EMIF_DERATED_TIMINGS) ?
- timings->tDQSCK_max_derated : timings->tDQSCK_max;
- if (ip_rev == EMIF_4D5)
- val = DIV_ROUND_UP(t_dqsck + 1000, t_ck) - 1;
- else
- val = DIV_ROUND_UP(t_dqsck, t_ck) - 1;
-
- tim3 |= val << T_TDQSCKMAX_SHIFT;
-
- val = DIV_ROUND_UP(timings->tZQCS, t_ck) - 1;
- tim3 |= val << ZQ_ZQCS_SHIFT;
-
- val = DIV_ROUND_UP(timings->tCKESR, t_ck);
- val = max(min_tck->tCKESR, val) - 1;
- tim3 |= val << T_CKESR_SHIFT;
-
- if (ip_rev == EMIF_4D5) {
- tim3 |= (EMIF_T_CSTA - 1) << T_CSTA_SHIFT;
-
- val = DIV_ROUND_UP(EMIF_T_PDLL_UL, 128) - 1;
- tim3 |= val << T_PDLL_UL_SHIFT;
- }
-
- return tim3;
-}
-
static u32 get_zq_config_reg(const struct lpddr2_addressing *addressing,
bool cs1_used, bool cal_resistors_per_cs)
{
@@ -589,117 +367,6 @@
return alert;
}
-static u32 get_read_idle_ctrl_shdw(u8 volt_ramp)
-{
- u32 idle = 0, val = 0;
-
- /*
- * Maximum value in normal conditions and increased frequency
- * when voltage is ramping
- */
- if (volt_ramp)
- val = READ_IDLE_INTERVAL_DVFS / t_ck / 64 - 1;
- else
- val = 0x1FF;
-
- /*
- * READ_IDLE_CTRL register in EMIF4D has same offset and fields
- * as DLL_CALIB_CTRL in EMIF4D5, so use the same shifts
- */
- idle |= val << DLL_CALIB_INTERVAL_SHIFT;
- idle |= EMIF_READ_IDLE_LEN_VAL << ACK_WAIT_SHIFT;
-
- return idle;
-}
-
-static u32 get_dll_calib_ctrl_shdw(u8 volt_ramp)
-{
- u32 calib = 0, val = 0;
-
- if (volt_ramp == DDR_VOLTAGE_RAMPING)
- val = DLL_CALIB_INTERVAL_DVFS / t_ck / 16 - 1;
- else
- val = 0; /* Disabled when voltage is stable */
-
- calib |= val << DLL_CALIB_INTERVAL_SHIFT;
- calib |= DLL_CALIB_ACK_WAIT_VAL << ACK_WAIT_SHIFT;
-
- return calib;
-}
-
-static u32 get_ddr_phy_ctrl_1_attilaphy_4d(const struct lpddr2_timings *timings,
- u32 freq, u8 RL)
-{
- u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY, val = 0;
-
- val = RL + DIV_ROUND_UP(timings->tDQSCK_max, t_ck) - 1;
- phy |= val << READ_LATENCY_SHIFT_4D;
-
- if (freq <= 100000000)
- val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY;
- else if (freq <= 200000000)
- val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY;
- else
- val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY;
-
- phy |= val << DLL_SLAVE_DLY_CTRL_SHIFT_4D;
-
- return phy;
-}
-
-static u32 get_phy_ctrl_1_intelliphy_4d5(u32 freq, u8 cl)
-{
- u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY, half_delay;
-
- /*
- * DLL operates at 266 MHz. If DDR frequency is near 266 MHz,
- * half-delay is not needed else set half-delay
- */
- if (freq >= 265000000 && freq < 267000000)
- half_delay = 0;
- else
- half_delay = 1;
-
- phy |= half_delay << DLL_HALF_DELAY_SHIFT_4D5;
- phy |= ((cl + DIV_ROUND_UP(EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS,
- t_ck) - 1) << READ_LATENCY_SHIFT_4D5);
-
- return phy;
-}
-
-static u32 get_ext_phy_ctrl_2_intelliphy_4d5(void)
-{
- u32 fifo_we_slave_ratio;
-
- fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
- EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
-
- return fifo_we_slave_ratio | fifo_we_slave_ratio << 11 |
- fifo_we_slave_ratio << 22;
-}
-
-static u32 get_ext_phy_ctrl_3_intelliphy_4d5(void)
-{
- u32 fifo_we_slave_ratio;
-
- fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
- EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
-
- return fifo_we_slave_ratio >> 10 | fifo_we_slave_ratio << 1 |
- fifo_we_slave_ratio << 12 | fifo_we_slave_ratio << 23;
-}
-
-static u32 get_ext_phy_ctrl_4_intelliphy_4d5(void)
-{
- u32 fifo_we_slave_ratio;
-
- fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
- EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
-
- return fifo_we_slave_ratio >> 9 | fifo_we_slave_ratio << 2 |
- fifo_we_slave_ratio << 13;
-}
-
static u32 get_pwr_mgmt_ctrl(u32 freq, struct emif_data *emif, u32 ip_rev)
{
u32 pwr_mgmt_ctrl = 0, timeout;
@@ -822,51 +489,6 @@
}
/*
- * Program EMIF shadow registers that are not dependent on temperature
- * or voltage
- */
-static void setup_registers(struct emif_data *emif, struct emif_regs *regs)
-{
- void __iomem *base = emif->base;
-
- writel(regs->sdram_tim2_shdw, base + EMIF_SDRAM_TIMING_2_SHDW);
- writel(regs->phy_ctrl_1_shdw, base + EMIF_DDR_PHY_CTRL_1_SHDW);
- writel(regs->pwr_mgmt_ctrl_shdw,
- base + EMIF_POWER_MANAGEMENT_CTRL_SHDW);
-
- /* Settings specific for EMIF4D5 */
- if (emif->plat_data->ip_rev != EMIF_4D5)
- return;
- writel(regs->ext_phy_ctrl_2_shdw, base + EMIF_EXT_PHY_CTRL_2_SHDW);
- writel(regs->ext_phy_ctrl_3_shdw, base + EMIF_EXT_PHY_CTRL_3_SHDW);
- writel(regs->ext_phy_ctrl_4_shdw, base + EMIF_EXT_PHY_CTRL_4_SHDW);
-}
-
-/*
- * When voltage ramps dll calibration and forced read idle should
- * happen more often
- */
-static void setup_volt_sensitive_regs(struct emif_data *emif,
- struct emif_regs *regs, u32 volt_state)
-{
- u32 calib_ctrl;
- void __iomem *base = emif->base;
-
- /*
- * EMIF_READ_IDLE_CTRL in EMIF4D refers to the same register as
- * EMIF_DLL_CALIB_CTRL in EMIF4D5 and dll_calib_ctrl_shadow_*
- * is an alias of the respective read_idle_ctrl_shdw_* (members of
- * a union). So, the below code takes care of both cases
- */
- if (volt_state == DDR_VOLTAGE_RAMPING)
- calib_ctrl = regs->dll_calib_ctrl_shdw_volt_ramp;
- else
- calib_ctrl = regs->dll_calib_ctrl_shdw_normal;
-
- writel(calib_ctrl, base + EMIF_DLL_CALIB_CTRL_SHDW);
-}
-
-/*
* setup_temperature_sensitive_regs() - set the timings for temperature
* sensitive registers. This happens once at initialisation time based
* on the temperature at boot time and subsequently based on the temperature
@@ -1508,7 +1130,6 @@
}
list_add(&emif->node, &device_list);
- emif->addressing = get_addressing_table(emif->plat_data->device_info);
/* Save pointers to each other in emif and device structures */
emif->dev = &pdev->dev;
@@ -1563,305 +1184,6 @@
disable_and_clear_all_interrupts(emif);
}
-static int get_emif_reg_values(struct emif_data *emif, u32 freq,
- struct emif_regs *regs)
-{
- u32 ip_rev, phy_type;
- u32 cl, type;
- const struct lpddr2_timings *timings;
- const struct lpddr2_min_tck *min_tck;
- const struct ddr_device_info *device_info;
- const struct lpddr2_addressing *addressing;
- struct emif_data *emif_for_calc;
- struct device *dev;
-
- dev = emif->dev;
- /*
- * If the devices on this EMIF instance is duplicate of EMIF1,
- * use EMIF1 details for the calculation
- */
- emif_for_calc = emif->duplicate ? emif1 : emif;
- timings = get_timings_table(emif_for_calc, freq);
- addressing = emif_for_calc->addressing;
- if (!timings || !addressing) {
- dev_err(dev, "%s: not enough data available for %dHz",
- __func__, freq);
- return -1;
- }
-
- device_info = emif_for_calc->plat_data->device_info;
- type = device_info->type;
- ip_rev = emif_for_calc->plat_data->ip_rev;
- phy_type = emif_for_calc->plat_data->phy_type;
-
- min_tck = emif_for_calc->plat_data->min_tck;
-
- set_ddr_clk_period(freq);
-
- regs->ref_ctrl_shdw = get_sdram_ref_ctrl_shdw(freq, addressing);
- regs->sdram_tim1_shdw = get_sdram_tim_1_shdw(timings, min_tck,
- addressing);
- regs->sdram_tim2_shdw = get_sdram_tim_2_shdw(timings, min_tck,
- addressing, type);
- regs->sdram_tim3_shdw = get_sdram_tim_3_shdw(timings, min_tck,
- addressing, type, ip_rev, EMIF_NORMAL_TIMINGS);
-
- cl = get_cl(emif);
-
- if (phy_type == EMIF_PHY_TYPE_ATTILAPHY && ip_rev == EMIF_4D) {
- regs->phy_ctrl_1_shdw = get_ddr_phy_ctrl_1_attilaphy_4d(
- timings, freq, cl);
- } else if (phy_type == EMIF_PHY_TYPE_INTELLIPHY && ip_rev == EMIF_4D5) {
- regs->phy_ctrl_1_shdw = get_phy_ctrl_1_intelliphy_4d5(freq, cl);
- regs->ext_phy_ctrl_2_shdw = get_ext_phy_ctrl_2_intelliphy_4d5();
- regs->ext_phy_ctrl_3_shdw = get_ext_phy_ctrl_3_intelliphy_4d5();
- regs->ext_phy_ctrl_4_shdw = get_ext_phy_ctrl_4_intelliphy_4d5();
- } else {
- return -1;
- }
-
- /* Only timeout values in pwr_mgmt_ctrl_shdw register */
- regs->pwr_mgmt_ctrl_shdw =
- get_pwr_mgmt_ctrl(freq, emif_for_calc, ip_rev) &
- (CS_TIM_MASK | SR_TIM_MASK | PD_TIM_MASK);
-
- if (ip_rev & EMIF_4D) {
- regs->read_idle_ctrl_shdw_normal =
- get_read_idle_ctrl_shdw(DDR_VOLTAGE_STABLE);
-
- regs->read_idle_ctrl_shdw_volt_ramp =
- get_read_idle_ctrl_shdw(DDR_VOLTAGE_RAMPING);
- } else if (ip_rev & EMIF_4D5) {
- regs->dll_calib_ctrl_shdw_normal =
- get_dll_calib_ctrl_shdw(DDR_VOLTAGE_STABLE);
-
- regs->dll_calib_ctrl_shdw_volt_ramp =
- get_dll_calib_ctrl_shdw(DDR_VOLTAGE_RAMPING);
- }
-
- if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
- regs->ref_ctrl_shdw_derated = get_sdram_ref_ctrl_shdw(freq / 4,
- addressing);
-
- regs->sdram_tim1_shdw_derated =
- get_sdram_tim_1_shdw_derated(timings, min_tck,
- addressing);
-
- regs->sdram_tim3_shdw_derated = get_sdram_tim_3_shdw(timings,
- min_tck, addressing, type, ip_rev,
- EMIF_DERATED_TIMINGS);
- }
-
- regs->freq = freq;
-
- return 0;
-}
-
-/*
- * get_regs() - gets the cached emif_regs structure for a given EMIF instance
- * given frequency(freq):
- *
- * As an optimisation, every EMIF instance other than EMIF1 shares the
- * register cache with EMIF1 if the devices connected on this instance
- * are same as that on EMIF1(indicated by the duplicate flag)
- *
- * If we do not have an entry corresponding to the frequency given, we
- * allocate a new entry and calculate the values
- *
- * Upon finding the right reg dump, save it in curr_regs. It can be
- * directly used for thermal de-rating and voltage ramping changes.
- */
-static struct emif_regs *get_regs(struct emif_data *emif, u32 freq)
-{
- int i;
- struct emif_regs **regs_cache;
- struct emif_regs *regs = NULL;
- struct device *dev;
-
- dev = emif->dev;
- if (emif->curr_regs && emif->curr_regs->freq == freq) {
- dev_dbg(dev, "%s: using curr_regs - %u Hz", __func__, freq);
- return emif->curr_regs;
- }
-
- if (emif->duplicate)
- regs_cache = emif1->regs_cache;
- else
- regs_cache = emif->regs_cache;
-
- for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
- if (regs_cache[i]->freq == freq) {
- regs = regs_cache[i];
- dev_dbg(dev,
- "%s: reg dump found in reg cache for %u Hz\n",
- __func__, freq);
- break;
- }
- }
-
- /*
- * If we don't have an entry for this frequency in the cache create one
- * and calculate the values
- */
- if (!regs) {
- regs = devm_kzalloc(emif->dev, sizeof(*regs), GFP_ATOMIC);
- if (!regs)
- return NULL;
-
- if (get_emif_reg_values(emif, freq, regs)) {
- devm_kfree(emif->dev, regs);
- return NULL;
- }
-
- /*
- * Now look for an un-used entry in the cache and save the
- * newly created struct. If there are no free entries
- * over-write the last entry
- */
- for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++)
- ;
-
- if (i >= EMIF_MAX_NUM_FREQUENCIES) {
- dev_warn(dev, "%s: regs_cache full - reusing a slot!!\n",
- __func__);
- i = EMIF_MAX_NUM_FREQUENCIES - 1;
- devm_kfree(emif->dev, regs_cache[i]);
- }
- regs_cache[i] = regs;
- }
-
- return regs;
-}
-
-static void do_volt_notify_handling(struct emif_data *emif, u32 volt_state)
-{
- dev_dbg(emif->dev, "%s: voltage notification : %d", __func__,
- volt_state);
-
- if (!emif->curr_regs) {
- dev_err(emif->dev,
- "%s: volt-notify before registers are ready: %d\n",
- __func__, volt_state);
- return;
- }
-
- setup_volt_sensitive_regs(emif, emif->curr_regs, volt_state);
-}
-
-/*
- * TODO: voltage notify handling should be hooked up to
- * regulator framework as soon as the necessary support
- * is available in mainline kernel. This function is un-used
- * right now.
- */
-static void __attribute__((unused)) volt_notify_handling(u32 volt_state)
-{
- struct emif_data *emif;
-
- spin_lock_irqsave(&emif_lock, irq_state);
-
- list_for_each_entry(emif, &device_list, node)
- do_volt_notify_handling(emif, volt_state);
- do_freq_update();
-
- spin_unlock_irqrestore(&emif_lock, irq_state);
-}
-
-static void do_freq_pre_notify_handling(struct emif_data *emif, u32 new_freq)
-{
- struct emif_regs *regs;
-
- regs = get_regs(emif, new_freq);
- if (!regs)
- return;
-
- emif->curr_regs = regs;
-
- /*
- * Update the shadow registers:
- * Temperature and voltage-ramp sensitive settings are also configured
- * in terms of DDR cycles. So, we need to update them too when there
- * is a freq change
- */
- dev_dbg(emif->dev, "%s: setting up shadow registers for %uHz",
- __func__, new_freq);
- setup_registers(emif, regs);
- setup_temperature_sensitive_regs(emif, regs);
- setup_volt_sensitive_regs(emif, regs, DDR_VOLTAGE_STABLE);
-
- /*
- * Part of workaround for errata i728. See do_freq_update()
- * for more details
- */
- if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
- set_lpmode(emif, EMIF_LP_MODE_DISABLE);
-}
-
-/*
- * TODO: frequency notify handling should be hooked up to
- * clock framework as soon as the necessary support is
- * available in mainline kernel. This function is un-used
- * right now.
- */
-static void __attribute__((unused)) freq_pre_notify_handling(u32 new_freq)
-{
- struct emif_data *emif;
-
- /*
- * NOTE: we are taking the spin-lock here and releases it
- * only in post-notifier. This doesn't look good and
- * Sparse complains about it, but this seems to be
- * un-avoidable. We need to lock a sequence of events
- * that is split between EMIF and clock framework.
- *
- * 1. EMIF driver updates EMIF timings in shadow registers in the
- * frequency pre-notify callback from clock framework
- * 2. clock framework sets up the registers for the new frequency
- * 3. clock framework initiates a hw-sequence that updates
- * the frequency EMIF timings synchronously.
- *
- * All these 3 steps should be performed as an atomic operation
- * vis-a-vis similar sequence in the EMIF interrupt handler
- * for temperature events. Otherwise, there could be race
- * conditions that could result in incorrect EMIF timings for
- * a given frequency
- */
- spin_lock_irqsave(&emif_lock, irq_state);
-
- list_for_each_entry(emif, &device_list, node)
- do_freq_pre_notify_handling(emif, new_freq);
-}
-
-static void do_freq_post_notify_handling(struct emif_data *emif)
-{
- /*
- * Part of workaround for errata i728. See do_freq_update()
- * for more details
- */
- if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
- set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
-}
-
-/*
- * TODO: frequency notify handling should be hooked up to
- * clock framework as soon as the necessary support is
- * available in mainline kernel. This function is un-used
- * right now.
- */
-static void __attribute__((unused)) freq_post_notify_handling(void)
-{
- struct emif_data *emif;
-
- list_for_each_entry(emif, &device_list, node)
- do_freq_post_notify_handling(emif);
-
- /*
- * Lock is done in pre-notify handler. See freq_pre_notify_handling()
- * for more details
- */
- spin_unlock_irqrestore(&emif_lock, irq_state);
-}
-
#if defined(CONFIG_OF)
static const struct of_device_id emif_of_match[] = {
{ .compatible = "ti,emif-4d" },
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index 89f99b5..d062c2f 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -97,7 +97,6 @@
iounmap(ctrl->gregs);
dev_set_drvdata(&dev->dev, NULL);
- kfree(ctrl);
return 0;
}
@@ -209,7 +208,8 @@
dev_info(&dev->dev, "Freescale Integrated Flash Controller\n");
- fsl_ifc_ctrl_dev = kzalloc(sizeof(*fsl_ifc_ctrl_dev), GFP_KERNEL);
+ fsl_ifc_ctrl_dev = devm_kzalloc(&dev->dev, sizeof(*fsl_ifc_ctrl_dev),
+ GFP_KERNEL);
if (!fsl_ifc_ctrl_dev)
return -ENOMEM;
@@ -219,8 +219,7 @@
fsl_ifc_ctrl_dev->gregs = of_iomap(dev->dev.of_node, 0);
if (!fsl_ifc_ctrl_dev->gregs) {
dev_err(&dev->dev, "failed to get memory region\n");
- ret = -ENODEV;
- goto err;
+ return -ENODEV;
}
if (of_property_read_bool(dev->dev.of_node, "little-endian")) {
@@ -295,6 +294,7 @@
free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);
irq_dispose_mapping(fsl_ifc_ctrl_dev->irq);
err:
+ iounmap(fsl_ifc_ctrl_dev->gregs);
return ret;
}
diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index 925d856..f84b9827 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -116,6 +116,7 @@
break;
}
if (!match) {
+ err = -ENODEV;
dev_err(&adev->dev, "no matching children\n");
goto disable_mem_clk;
}
diff --git a/drivers/memory/stm32-fmc2-ebi.c b/drivers/memory/stm32-fmc2-ebi.c
index 4d5758c4..ffec26a 100644
--- a/drivers/memory/stm32-fmc2-ebi.c
+++ b/drivers/memory/stm32-fmc2-ebi.c
@@ -1048,16 +1048,19 @@
if (ret) {
dev_err(dev, "could not retrieve reg property: %d\n",
ret);
+ of_node_put(child);
return ret;
}
if (bank >= FMC2_MAX_BANKS) {
dev_err(dev, "invalid reg value: %d\n", bank);
+ of_node_put(child);
return -EINVAL;
}
if (ebi->bank_assigned & BIT(bank)) {
dev_err(dev, "bank already assigned: %d\n", bank);
+ of_node_put(child);
return -EINVAL;
}
@@ -1066,6 +1069,7 @@
if (ret) {
dev_err(dev, "setup chip select %d failed: %d\n",
bank, ret);
+ of_node_put(child);
return ret;
}
}
diff --git a/drivers/memory/tegra/Kconfig b/drivers/memory/tegra/Kconfig
index a70967a..f9bae36 100644
--- a/drivers/memory/tegra/Kconfig
+++ b/drivers/memory/tegra/Kconfig
@@ -2,16 +2,18 @@
config TEGRA_MC
bool "NVIDIA Tegra Memory Controller support"
default y
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA || (COMPILE_TEST && COMMON_CLK)
select INTERCONNECT
help
This driver supports the Memory Controller (MC) hardware found on
NVIDIA Tegra SoCs.
+if TEGRA_MC
+
config TEGRA20_EMC
tristate "NVIDIA Tegra20 External Memory Controller driver"
default y
- depends on TEGRA_MC && ARCH_TEGRA_2x_SOC
+ depends on ARCH_TEGRA_2x_SOC || COMPILE_TEST
select DEVFREQ_GOV_SIMPLE_ONDEMAND
select PM_DEVFREQ
help
@@ -23,7 +25,7 @@
config TEGRA30_EMC
tristate "NVIDIA Tegra30 External Memory Controller driver"
default y
- depends on TEGRA_MC && ARCH_TEGRA_3x_SOC
+ depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST
select PM_OPP
help
This driver is for the External Memory Controller (EMC) found on
@@ -34,8 +36,8 @@
config TEGRA124_EMC
tristate "NVIDIA Tegra124 External Memory Controller driver"
default y
- depends on TEGRA_MC && ARCH_TEGRA_124_SOC
- select TEGRA124_CLK_EMC
+ depends on ARCH_TEGRA_124_SOC || COMPILE_TEST
+ select TEGRA124_CLK_EMC if ARCH_TEGRA
select PM_OPP
help
This driver is for the External Memory Controller (EMC) found on
@@ -45,14 +47,16 @@
config TEGRA210_EMC_TABLE
bool
- depends on ARCH_TEGRA_210_SOC
+ depends on ARCH_TEGRA_210_SOC || COMPILE_TEST
config TEGRA210_EMC
tristate "NVIDIA Tegra210 External Memory Controller driver"
- depends on TEGRA_MC && ARCH_TEGRA_210_SOC
+ depends on ARCH_TEGRA_210_SOC || COMPILE_TEST
select TEGRA210_EMC_TABLE
help
This driver is for the External Memory Controller (EMC) found on
Tegra210 chips. The EMC controls the external DRAM on the board.
This driver is required to change memory timings / clock rate for
external memory.
+
+endif
diff --git a/drivers/memory/tegra/Makefile b/drivers/memory/tegra/Makefile
index 6c1a2ecc6..c992e87 100644
--- a/drivers/memory/tegra/Makefile
+++ b/drivers/memory/tegra/Makefile
@@ -7,6 +7,8 @@
tegra-mc-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124.o
tegra-mc-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra124.o
tegra-mc-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra186.o tegra194.o
obj-$(CONFIG_TEGRA_MC) += tegra-mc.o
@@ -15,7 +17,7 @@
obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o
obj-$(CONFIG_TEGRA210_EMC_TABLE) += tegra210-emc-table.o
obj-$(CONFIG_TEGRA210_EMC) += tegra210-emc.o
-obj-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186.o tegra186-emc.o
-obj-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra186.o tegra186-emc.o
+obj-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-emc.o
+obj-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra186-emc.o
tegra210-emc-y := tegra210-emc-core.o tegra210-emc-cc-r21021.o
diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c
index e58c3e5..3c5aae7 100644
--- a/drivers/memory/tegra/mc.c
+++ b/drivers/memory/tegra/mc.c
@@ -39,7 +39,13 @@
#ifdef CONFIG_ARCH_TEGRA_210_SOC
{ .compatible = "nvidia,tegra210-mc", .data = &tegra210_mc_soc },
#endif
- { }
+#ifdef CONFIG_ARCH_TEGRA_186_SOC
+ { .compatible = "nvidia,tegra186-mc", .data = &tegra186_mc_soc },
+#endif
+#ifdef CONFIG_ARCH_TEGRA_194_SOC
+ { .compatible = "nvidia,tegra194-mc", .data = &tegra194_mc_soc },
+#endif
+ { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, tegra_mc_of_match);
@@ -91,6 +97,15 @@
}
EXPORT_SYMBOL_GPL(devm_tegra_memory_controller_get);
+int tegra_mc_probe_device(struct tegra_mc *mc, struct device *dev)
+{
+ if (mc->soc->ops && mc->soc->ops->probe_device)
+ return mc->soc->ops->probe_device(mc, dev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(tegra_mc_probe_device);
+
static int tegra_mc_block_dma_common(struct tegra_mc *mc,
const struct tegra_mc_reset *rst)
{
@@ -299,38 +314,6 @@
return 0;
}
-static int tegra_mc_setup_latency_allowance(struct tegra_mc *mc)
-{
- unsigned long long tick;
- unsigned int i;
- u32 value;
-
- /* compute the number of MC clock cycles per tick */
- tick = (unsigned long long)mc->tick * clk_get_rate(mc->clk);
- do_div(tick, NSEC_PER_SEC);
-
- value = mc_readl(mc, MC_EMEM_ARB_CFG);
- value &= ~MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK;
- value |= MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE(tick);
- mc_writel(mc, value, MC_EMEM_ARB_CFG);
-
- /* write latency allowance defaults */
- for (i = 0; i < mc->soc->num_clients; i++) {
- const struct tegra_mc_la *la = &mc->soc->clients[i].la;
- u32 value;
-
- value = mc_readl(mc, la->reg);
- value &= ~(la->mask << la->shift);
- value |= (la->def & la->mask) << la->shift;
- mc_writel(mc, value, la->reg);
- }
-
- /* latch new values */
- mc_writel(mc, MC_TIMING_UPDATE, MC_TIMING_CONTROL);
-
- return 0;
-}
-
int tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate)
{
unsigned int i;
@@ -368,6 +351,43 @@
}
EXPORT_SYMBOL_GPL(tegra_mc_get_emem_device_count);
+#if defined(CONFIG_ARCH_TEGRA_3x_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_114_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_124_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_132_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_210_SOC)
+static int tegra_mc_setup_latency_allowance(struct tegra_mc *mc)
+{
+ unsigned long long tick;
+ unsigned int i;
+ u32 value;
+
+ /* compute the number of MC clock cycles per tick */
+ tick = (unsigned long long)mc->tick * clk_get_rate(mc->clk);
+ do_div(tick, NSEC_PER_SEC);
+
+ value = mc_readl(mc, MC_EMEM_ARB_CFG);
+ value &= ~MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK;
+ value |= MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE(tick);
+ mc_writel(mc, value, MC_EMEM_ARB_CFG);
+
+ /* write latency allowance defaults */
+ for (i = 0; i < mc->soc->num_clients; i++) {
+ const struct tegra_mc_client *client = &mc->soc->clients[i];
+ u32 value;
+
+ value = mc_readl(mc, client->regs.la.reg);
+ value &= ~(client->regs.la.mask << client->regs.la.shift);
+ value |= (client->regs.la.def & client->regs.la.mask) << client->regs.la.shift;
+ mc_writel(mc, value, client->regs.la.reg);
+ }
+
+ /* latch new values */
+ mc_writel(mc, MC_TIMING_UPDATE, MC_TIMING_CONTROL);
+
+ return 0;
+}
+
static int load_one_timing(struct tegra_mc *mc,
struct tegra_mc_timing *timing,
struct device_node *node)
@@ -459,27 +479,35 @@
return 0;
}
-static const char *const status_names[32] = {
- [ 1] = "External interrupt",
- [ 6] = "EMEM address decode error",
- [ 7] = "GART page fault",
- [ 8] = "Security violation",
- [ 9] = "EMEM arbitration error",
- [10] = "Page fault",
- [11] = "Invalid APB ASID update",
- [12] = "VPR violation",
- [13] = "Secure carveout violation",
- [16] = "MTS carveout violation",
-};
+int tegra30_mc_probe(struct tegra_mc *mc)
+{
+ int err;
-static const char *const error_names[8] = {
- [2] = "EMEM decode error",
- [3] = "TrustZone violation",
- [4] = "Carveout violation",
- [6] = "SMMU translation error",
-};
+ mc->clk = devm_clk_get_optional(mc->dev, "mc");
+ if (IS_ERR(mc->clk)) {
+ dev_err(mc->dev, "failed to get MC clock: %ld\n", PTR_ERR(mc->clk));
+ return PTR_ERR(mc->clk);
+ }
-static irqreturn_t tegra_mc_irq(int irq, void *data)
+ /* ensure that debug features are disabled */
+ mc_writel(mc, 0x00000000, MC_TIMING_CONTROL_DBG);
+
+ err = tegra_mc_setup_latency_allowance(mc);
+ if (err < 0) {
+ dev_err(mc->dev, "failed to setup latency allowance: %d\n", err);
+ return err;
+ }
+
+ err = tegra_mc_setup_timings(mc);
+ if (err < 0) {
+ dev_err(mc->dev, "failed to setup timings: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static irqreturn_t tegra30_mc_handle_irq(int irq, void *data)
{
struct tegra_mc *mc = data;
unsigned long status;
@@ -491,7 +519,7 @@
return IRQ_NONE;
for_each_set_bit(bit, &status, 32) {
- const char *error = status_names[bit] ?: "unknown";
+ const char *error = tegra_mc_status_names[bit] ?: "unknown";
const char *client = "unknown", *desc;
const char *direction, *secure;
phys_addr_t addr = 0;
@@ -531,7 +559,7 @@
type = (value & MC_ERR_STATUS_TYPE_MASK) >>
MC_ERR_STATUS_TYPE_SHIFT;
- desc = error_names[type];
+ desc = tegra_mc_error_names[type];
switch (value & MC_ERR_STATUS_TYPE_MASK) {
case MC_ERR_STATUS_TYPE_INVALID_SMMU_PAGE:
@@ -576,78 +604,31 @@
return IRQ_HANDLED;
}
-static __maybe_unused irqreturn_t tegra20_mc_irq(int irq, void *data)
-{
- struct tegra_mc *mc = data;
- unsigned long status;
- unsigned int bit;
+const struct tegra_mc_ops tegra30_mc_ops = {
+ .probe = tegra30_mc_probe,
+ .handle_irq = tegra30_mc_handle_irq,
+};
+#endif
- /* mask all interrupts to avoid flooding */
- status = mc_readl(mc, MC_INTSTATUS) & mc->soc->intmask;
- if (!status)
- return IRQ_NONE;
+const char *const tegra_mc_status_names[32] = {
+ [ 1] = "External interrupt",
+ [ 6] = "EMEM address decode error",
+ [ 7] = "GART page fault",
+ [ 8] = "Security violation",
+ [ 9] = "EMEM arbitration error",
+ [10] = "Page fault",
+ [11] = "Invalid APB ASID update",
+ [12] = "VPR violation",
+ [13] = "Secure carveout violation",
+ [16] = "MTS carveout violation",
+};
- for_each_set_bit(bit, &status, 32) {
- const char *direction = "read", *secure = "";
- const char *error = status_names[bit];
- const char *client, *desc;
- phys_addr_t addr;
- u32 value, reg;
- u8 id, type;
-
- switch (BIT(bit)) {
- case MC_INT_DECERR_EMEM:
- reg = MC_DECERR_EMEM_OTHERS_STATUS;
- value = mc_readl(mc, reg);
-
- id = value & mc->soc->client_id_mask;
- desc = error_names[2];
-
- if (value & BIT(31))
- direction = "write";
- break;
-
- case MC_INT_INVALID_GART_PAGE:
- reg = MC_GART_ERROR_REQ;
- value = mc_readl(mc, reg);
-
- id = (value >> 1) & mc->soc->client_id_mask;
- desc = error_names[2];
-
- if (value & BIT(0))
- direction = "write";
- break;
-
- case MC_INT_SECURITY_VIOLATION:
- reg = MC_SECURITY_VIOLATION_STATUS;
- value = mc_readl(mc, reg);
-
- id = value & mc->soc->client_id_mask;
- type = (value & BIT(30)) ? 4 : 3;
- desc = error_names[type];
- secure = "secure ";
-
- if (value & BIT(31))
- direction = "write";
- break;
-
- default:
- continue;
- }
-
- client = mc->soc->clients[id].name;
- addr = mc_readl(mc, reg + sizeof(u32));
-
- dev_err_ratelimited(mc->dev, "%s: %s%s @%pa: %s (%s)\n",
- client, secure, direction, &addr, error,
- desc);
- }
-
- /* clear interrupts */
- mc_writel(mc, status, MC_INTSTATUS);
-
- return IRQ_HANDLED;
-}
+const char *const tegra_mc_error_names[8] = {
+ [2] = "EMEM decode error",
+ [3] = "TrustZone violation",
+ [4] = "Carveout violation",
+ [6] = "SMMU translation error",
+};
/*
* Memory Controller (MC) has few Memory Clients that are issuing memory
@@ -748,7 +729,6 @@
{
struct resource *res;
struct tegra_mc *mc;
- void *isr;
u64 mask;
int err;
@@ -777,69 +757,37 @@
if (IS_ERR(mc->regs))
return PTR_ERR(mc->regs);
- mc->clk = devm_clk_get(&pdev->dev, "mc");
- if (IS_ERR(mc->clk)) {
- dev_err(&pdev->dev, "failed to get MC clock: %ld\n",
- PTR_ERR(mc->clk));
- return PTR_ERR(mc->clk);
- }
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
- if (mc->soc == &tegra20_mc_soc) {
- isr = tegra20_mc_irq;
- } else
-#endif
- {
- /* ensure that debug features are disabled */
- mc_writel(mc, 0x00000000, MC_TIMING_CONTROL_DBG);
-
- err = tegra_mc_setup_latency_allowance(mc);
- if (err < 0) {
- dev_err(&pdev->dev,
- "failed to setup latency allowance: %d\n",
- err);
- return err;
- }
-
- isr = tegra_mc_irq;
-
- err = tegra_mc_setup_timings(mc);
- if (err < 0) {
- dev_err(&pdev->dev, "failed to setup timings: %d\n",
- err);
- return err;
- }
- }
-
- mc->irq = platform_get_irq(pdev, 0);
- if (mc->irq < 0)
- return mc->irq;
-
- WARN(!mc->soc->client_id_mask, "missing client ID mask for this SoC\n");
-
- mc_writel(mc, mc->soc->intmask, MC_INTMASK);
-
- err = devm_request_irq(&pdev->dev, mc->irq, isr, 0,
- dev_name(&pdev->dev), mc);
- if (err < 0) {
- dev_err(&pdev->dev, "failed to request IRQ#%u: %d\n", mc->irq,
- err);
- return err;
- }
-
mc->debugfs.root = debugfs_create_dir("mc", NULL);
- if (mc->soc->init) {
- err = mc->soc->init(mc);
+ if (mc->soc->ops && mc->soc->ops->probe) {
+ err = mc->soc->ops->probe(mc);
if (err < 0)
- dev_err(&pdev->dev, "failed to initialize SoC driver: %d\n",
- err);
+ return err;
}
- err = tegra_mc_reset_setup(mc);
- if (err < 0)
- dev_err(&pdev->dev, "failed to register reset controller: %d\n",
- err);
+ if (mc->soc->ops && mc->soc->ops->handle_irq) {
+ mc->irq = platform_get_irq(pdev, 0);
+ if (mc->irq < 0)
+ return mc->irq;
+
+ WARN(!mc->soc->client_id_mask, "missing client ID mask for this SoC\n");
+
+ mc_writel(mc, mc->soc->intmask, MC_INTMASK);
+
+ err = devm_request_irq(&pdev->dev, mc->irq, mc->soc->ops->handle_irq, 0,
+ dev_name(&pdev->dev), mc);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to request IRQ#%u: %d\n", mc->irq,
+ err);
+ return err;
+ }
+ }
+
+ if (mc->soc->reset_ops) {
+ err = tegra_mc_reset_setup(mc);
+ if (err < 0)
+ dev_err(&pdev->dev, "failed to register reset controller: %d\n", err);
+ }
err = tegra_mc_interconnect_setup(mc);
if (err < 0)
@@ -867,37 +815,28 @@
return 0;
}
-static int tegra_mc_suspend(struct device *dev)
+static int __maybe_unused tegra_mc_suspend(struct device *dev)
{
struct tegra_mc *mc = dev_get_drvdata(dev);
- int err;
- if (IS_ENABLED(CONFIG_TEGRA_IOMMU_GART) && mc->gart) {
- err = tegra_gart_suspend(mc->gart);
- if (err)
- return err;
- }
+ if (mc->soc->ops && mc->soc->ops->suspend)
+ return mc->soc->ops->suspend(mc);
return 0;
}
-static int tegra_mc_resume(struct device *dev)
+static int __maybe_unused tegra_mc_resume(struct device *dev)
{
struct tegra_mc *mc = dev_get_drvdata(dev);
- int err;
- if (IS_ENABLED(CONFIG_TEGRA_IOMMU_GART) && mc->gart) {
- err = tegra_gart_resume(mc->gart);
- if (err)
- return err;
- }
+ if (mc->soc->ops && mc->soc->ops->resume)
+ return mc->soc->ops->resume(mc);
return 0;
}
static const struct dev_pm_ops tegra_mc_pm_ops = {
- .suspend = tegra_mc_suspend,
- .resume = tegra_mc_resume,
+ SET_SYSTEM_SLEEP_PM_OPS(tegra_mc_suspend, tegra_mc_resume)
};
static struct platform_driver tegra_mc_driver = {
diff --git a/drivers/memory/tegra/mc.h b/drivers/memory/tegra/mc.h
index 1ee34f0..1e49298 100644
--- a/drivers/memory/tegra/mc.h
+++ b/drivers/memory/tegra/mc.h
@@ -129,6 +129,31 @@
extern const struct tegra_mc_soc tegra210_mc_soc;
#endif
+#ifdef CONFIG_ARCH_TEGRA_186_SOC
+extern const struct tegra_mc_soc tegra186_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_194_SOC
+extern const struct tegra_mc_soc tegra194_mc_soc;
+#endif
+
+#if defined(CONFIG_ARCH_TEGRA_3x_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_114_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_124_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_132_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_210_SOC)
+int tegra30_mc_probe(struct tegra_mc *mc);
+extern const struct tegra_mc_ops tegra30_mc_ops;
+#endif
+
+#if defined(CONFIG_ARCH_TEGRA_186_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_194_SOC)
+extern const struct tegra_mc_ops tegra186_mc_ops;
+#endif
+
+extern const char * const tegra_mc_status_names[32];
+extern const char * const tegra_mc_error_names[8];
+
/*
* These IDs are for internal use of Tegra ICC drivers. The ID numbers are
* chosen such that they don't conflict with the device-tree ICC node IDs.
diff --git a/drivers/memory/tegra/tegra114.c b/drivers/memory/tegra/tegra114.c
index ed376ba..4135057 100644
--- a/drivers/memory/tegra/tegra114.c
+++ b/drivers/memory/tegra/tegra114.c
@@ -15,883 +15,1013 @@
.id = 0x00,
.name = "ptcr",
.swgroup = TEGRA_SWGROUP_PTC,
- .la = {
- .reg = 0x34c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0,
+ .regs = {
+ .la = {
+ .reg = 0x34c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0,
+ },
},
}, {
.id = 0x01,
.name = "display0a",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 1,
- },
- .la = {
- .reg = 0x2e8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
}, {
.id = 0x02,
.name = "display0ab",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 2,
- },
- .la = {
- .reg = 0x2f4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
}, {
.id = 0x03,
.name = "display0b",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 3,
- },
- .la = {
- .reg = 0x2e8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
}, {
.id = 0x04,
.name = "display0bb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 4,
- },
- .la = {
- .reg = 0x2f4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
}, {
.id = 0x05,
.name = "display0c",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 5,
- },
- .la = {
- .reg = 0x2ec,
- .shift = 0,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x2ec,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
}, {
.id = 0x06,
.name = "display0cb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 6,
- },
- .la = {
- .reg = 0x2f8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x2f8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
}, {
.id = 0x09,
.name = "eppup",
.swgroup = TEGRA_SWGROUP_EPP,
- .smmu = {
- .reg = 0x228,
- .bit = 9,
- },
- .la = {
- .reg = 0x300,
- .shift = 0,
- .mask = 0xff,
- .def = 0x33,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 9,
+ },
+ .la = {
+ .reg = 0x300,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x33,
+ },
},
}, {
.id = 0x0a,
.name = "g2pr",
.swgroup = TEGRA_SWGROUP_G2,
- .smmu = {
- .reg = 0x228,
- .bit = 10,
- },
- .la = {
- .reg = 0x308,
- .shift = 0,
- .mask = 0xff,
- .def = 0x09,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x308,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x09,
+ },
},
}, {
.id = 0x0b,
.name = "g2sr",
.swgroup = TEGRA_SWGROUP_G2,
- .smmu = {
- .reg = 0x228,
- .bit = 11,
- },
- .la = {
- .reg = 0x308,
- .shift = 16,
- .mask = 0xff,
- .def = 0x09,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x308,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x09,
+ },
},
}, {
.id = 0x0f,
.name = "avpcarm7r",
.swgroup = TEGRA_SWGROUP_AVPC,
- .smmu = {
- .reg = 0x228,
- .bit = 15,
- },
- .la = {
- .reg = 0x2e4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x10,
.name = "displayhc",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 16,
- },
- .la = {
- .reg = 0x2f0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x68,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x68,
+ },
},
}, {
.id = 0x11,
.name = "displayhcb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 17,
- },
- .la = {
- .reg = 0x2fc,
- .shift = 0,
- .mask = 0xff,
- .def = 0x68,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2fc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x68,
+ },
},
}, {
.id = 0x12,
.name = "fdcdrd",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x228,
- .bit = 18,
- },
- .la = {
- .reg = 0x334,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0c,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x334,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
},
}, {
.id = 0x13,
.name = "fdcdrd2",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x228,
- .bit = 19,
- },
- .la = {
- .reg = 0x33c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0c,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x33c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
},
}, {
.id = 0x14,
.name = "g2dr",
.swgroup = TEGRA_SWGROUP_G2,
- .smmu = {
- .reg = 0x228,
- .bit = 20,
- },
- .la = {
- .reg = 0x30c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0a,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x30c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
},
}, {
.id = 0x15,
.name = "hdar",
.swgroup = TEGRA_SWGROUP_HDA,
- .smmu = {
- .reg = 0x228,
- .bit = 21,
- },
- .la = {
- .reg = 0x318,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x16,
.name = "host1xdmar",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x228,
- .bit = 22,
- },
- .la = {
- .reg = 0x310,
- .shift = 0,
- .mask = 0xff,
- .def = 0x10,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
},
}, {
.id = 0x17,
.name = "host1xr",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x228,
- .bit = 23,
- },
- .la = {
- .reg = 0x310,
- .shift = 16,
- .mask = 0xff,
- .def = 0xa5,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
},
}, {
.id = 0x18,
.name = "idxsrd",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x228,
- .bit = 24,
- },
- .la = {
- .reg = 0x334,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0b,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 24,
+ },
+ .la = {
+ .reg = 0x334,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0b,
+ },
},
}, {
.id = 0x1c,
.name = "msencsrd",
.swgroup = TEGRA_SWGROUP_MSENC,
- .smmu = {
- .reg = 0x228,
- .bit = 28,
- },
- .la = {
- .reg = 0x328,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x1d,
.name = "ppcsahbdmar",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x228,
- .bit = 29,
- },
- .la = {
- .reg = 0x344,
- .shift = 0,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x1e,
.name = "ppcsahbslvr",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x228,
- .bit = 30,
- },
- .la = {
- .reg = 0x344,
- .shift = 16,
- .mask = 0xff,
- .def = 0xe8,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xe8,
+ },
},
}, {
.id = 0x20,
.name = "texl2srd",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x22c,
- .bit = 0,
- },
- .la = {
- .reg = 0x338,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0c,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x338,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
},
}, {
.id = 0x22,
.name = "vdebsevr",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 2,
- },
- .la = {
- .reg = 0x354,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x23,
.name = "vdember",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 3,
- },
- .la = {
- .reg = 0x354,
- .shift = 16,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x24,
.name = "vdemcer",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 4,
- },
- .la = {
- .reg = 0x358,
- .shift = 0,
- .mask = 0xff,
- .def = 0xb8,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xb8,
+ },
},
}, {
.id = 0x25,
.name = "vdetper",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 5,
- },
- .la = {
- .reg = 0x358,
- .shift = 16,
- .mask = 0xff,
- .def = 0xee,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xee,
+ },
},
}, {
.id = 0x26,
.name = "mpcorelpr",
.swgroup = TEGRA_SWGROUP_MPCORELP,
- .la = {
- .reg = 0x324,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .la = {
+ .reg = 0x324,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x27,
.name = "mpcorer",
.swgroup = TEGRA_SWGROUP_MPCORE,
- .la = {
- .reg = 0x320,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .la = {
+ .reg = 0x320,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x28,
.name = "eppu",
.swgroup = TEGRA_SWGROUP_EPP,
- .smmu = {
- .reg = 0x22c,
- .bit = 8,
- },
- .la = {
- .reg = 0x300,
- .shift = 16,
- .mask = 0xff,
- .def = 0x33,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 8,
+ },
+ .la = {
+ .reg = 0x300,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x33,
+ },
},
}, {
.id = 0x29,
.name = "eppv",
.swgroup = TEGRA_SWGROUP_EPP,
- .smmu = {
- .reg = 0x22c,
- .bit = 9,
- },
- .la = {
- .reg = 0x304,
- .shift = 0,
- .mask = 0xff,
- .def = 0x6c,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 9,
+ },
+ .la = {
+ .reg = 0x304,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
},
}, {
.id = 0x2a,
.name = "eppy",
.swgroup = TEGRA_SWGROUP_EPP,
- .smmu = {
- .reg = 0x22c,
- .bit = 10,
- },
- .la = {
- .reg = 0x304,
- .shift = 16,
- .mask = 0xff,
- .def = 0x6c,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x304,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
},
}, {
.id = 0x2b,
.name = "msencswr",
.swgroup = TEGRA_SWGROUP_MSENC,
- .smmu = {
- .reg = 0x22c,
- .bit = 11,
- },
- .la = {
- .reg = 0x328,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x2c,
.name = "viwsb",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x22c,
- .bit = 12,
- },
- .la = {
- .reg = 0x364,
- .shift = 0,
- .mask = 0xff,
- .def = 0x47,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x364,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x47,
+ },
},
}, {
.id = 0x2d,
.name = "viwu",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x22c,
- .bit = 13,
- },
- .la = {
- .reg = 0x368,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x368,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x2e,
.name = "viwv",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x22c,
- .bit = 14,
- },
- .la = {
- .reg = 0x368,
- .shift = 16,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x368,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x2f,
.name = "viwy",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x22c,
- .bit = 15,
- },
- .la = {
- .reg = 0x36c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x47,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x36c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x47,
+ },
},
}, {
.id = 0x30,
.name = "g2dw",
.swgroup = TEGRA_SWGROUP_G2,
- .smmu = {
- .reg = 0x22c,
- .bit = 16,
- },
- .la = {
- .reg = 0x30c,
- .shift = 16,
- .mask = 0xff,
- .def = 0x9,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x30c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x9,
+ },
},
}, {
.id = 0x32,
.name = "avpcarm7w",
.swgroup = TEGRA_SWGROUP_AVPC,
- .smmu = {
- .reg = 0x22c,
- .bit = 18,
- },
- .la = {
- .reg = 0x2e4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0e,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
},
}, {
.id = 0x33,
.name = "fdcdwr",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x22c,
- .bit = 19,
- },
- .la = {
- .reg = 0x338,
- .shift = 16,
- .mask = 0xff,
- .def = 0x10,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x338,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x10,
+ },
},
}, {
.id = 0x34,
.name = "fdcdwr2",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x22c,
- .bit = 20,
- },
- .la = {
- .reg = 0x340,
- .shift = 0,
- .mask = 0xff,
- .def = 0x10,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x340,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
},
}, {
.id = 0x35,
.name = "hdaw",
.swgroup = TEGRA_SWGROUP_HDA,
- .smmu = {
- .reg = 0x22c,
- .bit = 21,
- },
- .la = {
- .reg = 0x318,
- .shift = 16,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x36,
.name = "host1xw",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x22c,
- .bit = 22,
- },
- .la = {
- .reg = 0x314,
- .shift = 0,
- .mask = 0xff,
- .def = 0x25,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x314,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x25,
+ },
},
}, {
.id = 0x37,
.name = "ispw",
.swgroup = TEGRA_SWGROUP_ISP,
- .smmu = {
- .reg = 0x22c,
- .bit = 23,
- },
- .la = {
- .reg = 0x31c,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x31c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x38,
.name = "mpcorelpw",
.swgroup = TEGRA_SWGROUP_MPCORELP,
- .la = {
- .reg = 0x324,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .la = {
+ .reg = 0x324,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x39,
.name = "mpcorew",
.swgroup = TEGRA_SWGROUP_MPCORE,
- .la = {
- .reg = 0x320,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0e,
+ .regs = {
+ .la = {
+ .reg = 0x320,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
},
}, {
.id = 0x3b,
.name = "ppcsahbdmaw",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x22c,
- .bit = 27,
- },
- .la = {
- .reg = 0x348,
- .shift = 0,
- .mask = 0xff,
- .def = 0xa5,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
},
}, {
.id = 0x3c,
.name = "ppcsahbslvw",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x22c,
- .bit = 28,
- },
- .la = {
- .reg = 0x348,
- .shift = 16,
- .mask = 0xff,
- .def = 0xe8,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xe8,
+ },
},
}, {
.id = 0x3e,
.name = "vdebsevw",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 30,
- },
- .la = {
- .reg = 0x35c,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x3f,
.name = "vdedbgw",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 31,
- },
- .la = {
- .reg = 0x35c,
- .shift = 16,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x40,
.name = "vdembew",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x230,
- .bit = 0,
- },
- .la = {
- .reg = 0x360,
- .shift = 0,
- .mask = 0xff,
- .def = 0x89,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x89,
+ },
},
}, {
.id = 0x41,
.name = "vdetpmw",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x230,
- .bit = 1,
- },
- .la = {
- .reg = 0x360,
- .shift = 16,
- .mask = 0xff,
- .def = 0x59,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x59,
+ },
},
}, {
.id = 0x4a,
.name = "xusb_hostr",
.swgroup = TEGRA_SWGROUP_XUSB_HOST,
- .smmu = {
- .reg = 0x230,
- .bit = 10,
- },
- .la = {
- .reg = 0x37c,
- .shift = 0,
- .mask = 0xff,
- .def = 0xa5,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
},
}, {
.id = 0x4b,
.name = "xusb_hostw",
.swgroup = TEGRA_SWGROUP_XUSB_HOST,
- .smmu = {
- .reg = 0x230,
- .bit = 11,
- },
- .la = {
- .reg = 0x37c,
- .shift = 16,
- .mask = 0xff,
- .def = 0xa5,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
},
}, {
.id = 0x4c,
.name = "xusb_devr",
.swgroup = TEGRA_SWGROUP_XUSB_DEV,
- .smmu = {
- .reg = 0x230,
- .bit = 12,
- },
- .la = {
- .reg = 0x380,
- .shift = 0,
- .mask = 0xff,
- .def = 0xa5,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
},
}, {
.id = 0x4d,
.name = "xusb_devw",
.swgroup = TEGRA_SWGROUP_XUSB_DEV,
- .smmu = {
- .reg = 0x230,
- .bit = 13,
- },
- .la = {
- .reg = 0x380,
- .shift = 16,
- .mask = 0xff,
- .def = 0xa5,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
},
}, {
.id = 0x4e,
.name = "fdcdwr3",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x230,
- .bit = 14,
- },
- .la = {
- .reg = 0x388,
- .shift = 0,
- .mask = 0xff,
- .def = 0x10,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
},
}, {
.id = 0x4f,
.name = "fdcdrd3",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x230,
- .bit = 15,
- },
- .la = {
- .reg = 0x384,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0c,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x384,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
},
}, {
.id = 0x50,
.name = "fdcwr4",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x230,
- .bit = 16,
- },
- .la = {
- .reg = 0x388,
- .shift = 16,
- .mask = 0xff,
- .def = 0x10,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x10,
+ },
},
}, {
.id = 0x51,
.name = "fdcrd4",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x230,
- .bit = 17,
- },
- .la = {
- .reg = 0x384,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0c,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x384,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
},
}, {
.id = 0x52,
.name = "emucifr",
.swgroup = TEGRA_SWGROUP_EMUCIF,
- .la = {
- .reg = 0x38c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .la = {
+ .reg = 0x38c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x53,
.name = "emucifw",
.swgroup = TEGRA_SWGROUP_EMUCIF,
- .la = {
- .reg = 0x38c,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0e,
+ .regs = {
+ .la = {
+ .reg = 0x38c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
},
}, {
.id = 0x54,
.name = "tsecsrd",
.swgroup = TEGRA_SWGROUP_TSEC,
- .smmu = {
- .reg = 0x230,
- .bit = 20,
- },
- .la = {
- .reg = 0x390,
- .shift = 0,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x55,
.name = "tsecswr",
.swgroup = TEGRA_SWGROUP_TSEC,
- .smmu = {
- .reg = 0x230,
- .bit = 21,
- },
- .la = {
- .reg = 0x390,
- .shift = 16,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
},
};
@@ -983,4 +1113,5 @@
.reset_ops = &tegra_mc_reset_ops_common,
.resets = tegra114_mc_resets,
.num_resets = ARRAY_SIZE(tegra114_mc_resets),
+ .ops = &tegra30_mc_ops,
};
diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index 5699d90..908f8d5 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -272,8 +272,8 @@
#define EMC_PUTERM_ADJ 0x574
#define DRAM_DEV_SEL_ALL 0
-#define DRAM_DEV_SEL_0 (2 << 30)
-#define DRAM_DEV_SEL_1 (1 << 30)
+#define DRAM_DEV_SEL_0 BIT(31)
+#define DRAM_DEV_SEL_1 BIT(30)
#define EMC_CFG_POWER_FEATURES_MASK \
(EMC_CFG_DYN_SREF | EMC_CFG_DRAM_ACPD | EMC_CFG_DRAM_CLKSTOP_SR | \
@@ -1269,10 +1269,6 @@
}
emc->debugfs.root = debugfs_create_dir("emc", NULL);
- if (!emc->debugfs.root) {
- dev_err(dev, "failed to create debugfs directory\n");
- return;
- }
debugfs_create_file("available_rates", 0444, emc->debugfs.root, emc,
&tegra_emc_debug_available_rates_fops);
diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c
index 459211f..d780a84 100644
--- a/drivers/memory/tegra/tegra124.c
+++ b/drivers/memory/tegra/tegra124.c
@@ -16,921 +16,1055 @@
.id = 0x00,
.name = "ptcr",
.swgroup = TEGRA_SWGROUP_PTC,
- .la = {
- .reg = 0x34c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0,
+ .regs = {
+ .la = {
+ .reg = 0x34c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0,
+ },
},
}, {
.id = 0x01,
.name = "display0a",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 1,
- },
- .la = {
- .reg = 0x2e8,
- .shift = 0,
- .mask = 0xff,
- .def = 0xc2,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xc2,
+ },
},
}, {
.id = 0x02,
.name = "display0ab",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 2,
- },
- .la = {
- .reg = 0x2f4,
- .shift = 0,
- .mask = 0xff,
- .def = 0xc6,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xc6,
+ },
},
}, {
.id = 0x03,
.name = "display0b",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 3,
- },
- .la = {
- .reg = 0x2e8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x04,
.name = "display0bb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 4,
- },
- .la = {
- .reg = 0x2f4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x05,
.name = "display0c",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 5,
- },
- .la = {
- .reg = 0x2ec,
- .shift = 0,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x2ec,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x06,
.name = "display0cb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 6,
- },
- .la = {
- .reg = 0x2f8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x2f8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x0e,
.name = "afir",
.swgroup = TEGRA_SWGROUP_AFI,
- .smmu = {
- .reg = 0x228,
- .bit = 14,
- },
- .la = {
- .reg = 0x2e0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x13,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x13,
+ },
},
}, {
.id = 0x0f,
.name = "avpcarm7r",
.swgroup = TEGRA_SWGROUP_AVPC,
- .smmu = {
- .reg = 0x228,
- .bit = 15,
- },
- .la = {
- .reg = 0x2e4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x10,
.name = "displayhc",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 16,
- },
- .la = {
- .reg = 0x2f0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x11,
.name = "displayhcb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 17,
- },
- .la = {
- .reg = 0x2fc,
- .shift = 0,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2fc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x15,
.name = "hdar",
.swgroup = TEGRA_SWGROUP_HDA,
- .smmu = {
- .reg = 0x228,
- .bit = 21,
- },
- .la = {
- .reg = 0x318,
- .shift = 0,
- .mask = 0xff,
- .def = 0x24,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x24,
+ },
},
}, {
.id = 0x16,
.name = "host1xdmar",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x228,
- .bit = 22,
- },
- .la = {
- .reg = 0x310,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x17,
.name = "host1xr",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x228,
- .bit = 23,
- },
- .la = {
- .reg = 0x310,
- .shift = 16,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x1c,
.name = "msencsrd",
.swgroup = TEGRA_SWGROUP_MSENC,
- .smmu = {
- .reg = 0x228,
- .bit = 28,
- },
- .la = {
- .reg = 0x328,
- .shift = 0,
- .mask = 0xff,
- .def = 0x23,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x23,
+ },
},
}, {
.id = 0x1d,
.name = "ppcsahbdmar",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x228,
- .bit = 29,
- },
- .la = {
- .reg = 0x344,
- .shift = 0,
- .mask = 0xff,
- .def = 0x49,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
},
}, {
.id = 0x1e,
.name = "ppcsahbslvr",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x228,
- .bit = 30,
- },
- .la = {
- .reg = 0x344,
- .shift = 16,
- .mask = 0xff,
- .def = 0x1a,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
},
}, {
.id = 0x1f,
.name = "satar",
.swgroup = TEGRA_SWGROUP_SATA,
- .smmu = {
- .reg = 0x228,
- .bit = 31,
- },
- .la = {
- .reg = 0x350,
- .shift = 0,
- .mask = 0xff,
- .def = 0x65,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x65,
+ },
},
}, {
.id = 0x22,
.name = "vdebsevr",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 2,
- },
- .la = {
- .reg = 0x354,
- .shift = 0,
- .mask = 0xff,
- .def = 0x4f,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4f,
+ },
},
}, {
.id = 0x23,
.name = "vdember",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 3,
- },
- .la = {
- .reg = 0x354,
- .shift = 16,
- .mask = 0xff,
- .def = 0x3d,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x3d,
+ },
},
}, {
.id = 0x24,
.name = "vdemcer",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 4,
- },
- .la = {
- .reg = 0x358,
- .shift = 0,
- .mask = 0xff,
- .def = 0x66,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x66,
+ },
},
}, {
.id = 0x25,
.name = "vdetper",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 5,
- },
- .la = {
- .reg = 0x358,
- .shift = 16,
- .mask = 0xff,
- .def = 0xa5,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
},
}, {
.id = 0x26,
.name = "mpcorelpr",
.swgroup = TEGRA_SWGROUP_MPCORELP,
- .la = {
- .reg = 0x324,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .la = {
+ .reg = 0x324,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x27,
.name = "mpcorer",
.swgroup = TEGRA_SWGROUP_MPCORE,
- .la = {
- .reg = 0x320,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .la = {
+ .reg = 0x320,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x2b,
.name = "msencswr",
.swgroup = TEGRA_SWGROUP_MSENC,
- .smmu = {
- .reg = 0x22c,
- .bit = 11,
- },
- .la = {
- .reg = 0x328,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x31,
.name = "afiw",
.swgroup = TEGRA_SWGROUP_AFI,
- .smmu = {
- .reg = 0x22c,
- .bit = 17,
- },
- .la = {
- .reg = 0x2e0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x32,
.name = "avpcarm7w",
.swgroup = TEGRA_SWGROUP_AVPC,
- .smmu = {
- .reg = 0x22c,
- .bit = 18,
- },
- .la = {
- .reg = 0x2e4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x35,
.name = "hdaw",
.swgroup = TEGRA_SWGROUP_HDA,
- .smmu = {
- .reg = 0x22c,
- .bit = 21,
- },
- .la = {
- .reg = 0x318,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x36,
.name = "host1xw",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x22c,
- .bit = 22,
- },
- .la = {
- .reg = 0x314,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x314,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x38,
.name = "mpcorelpw",
.swgroup = TEGRA_SWGROUP_MPCORELP,
- .la = {
- .reg = 0x324,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .la = {
+ .reg = 0x324,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x39,
.name = "mpcorew",
.swgroup = TEGRA_SWGROUP_MPCORE,
- .la = {
- .reg = 0x320,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .la = {
+ .reg = 0x320,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x3b,
.name = "ppcsahbdmaw",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x22c,
- .bit = 27,
- },
- .la = {
- .reg = 0x348,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x3c,
.name = "ppcsahbslvw",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x22c,
- .bit = 28,
- },
- .la = {
- .reg = 0x348,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x3d,
.name = "sataw",
.swgroup = TEGRA_SWGROUP_SATA,
- .smmu = {
- .reg = 0x22c,
- .bit = 29,
- },
- .la = {
- .reg = 0x350,
- .shift = 16,
- .mask = 0xff,
- .def = 0x65,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x65,
+ },
},
}, {
.id = 0x3e,
.name = "vdebsevw",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 30,
- },
- .la = {
- .reg = 0x35c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x3f,
.name = "vdedbgw",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 31,
- },
- .la = {
- .reg = 0x35c,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x40,
.name = "vdembew",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x230,
- .bit = 0,
- },
- .la = {
- .reg = 0x360,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x41,
.name = "vdetpmw",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x230,
- .bit = 1,
- },
- .la = {
- .reg = 0x360,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x44,
.name = "ispra",
.swgroup = TEGRA_SWGROUP_ISP2,
- .smmu = {
- .reg = 0x230,
- .bit = 4,
- },
- .la = {
- .reg = 0x370,
- .shift = 0,
- .mask = 0xff,
- .def = 0x18,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x370,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x18,
+ },
},
}, {
.id = 0x46,
.name = "ispwa",
.swgroup = TEGRA_SWGROUP_ISP2,
- .smmu = {
- .reg = 0x230,
- .bit = 6,
- },
- .la = {
- .reg = 0x374,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x374,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x47,
.name = "ispwb",
.swgroup = TEGRA_SWGROUP_ISP2,
- .smmu = {
- .reg = 0x230,
- .bit = 7,
- },
- .la = {
- .reg = 0x374,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 7,
+ },
+ .la = {
+ .reg = 0x374,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x4a,
.name = "xusb_hostr",
.swgroup = TEGRA_SWGROUP_XUSB_HOST,
- .smmu = {
- .reg = 0x230,
- .bit = 10,
- },
- .la = {
- .reg = 0x37c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x39,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x39,
+ },
},
}, {
.id = 0x4b,
.name = "xusb_hostw",
.swgroup = TEGRA_SWGROUP_XUSB_HOST,
- .smmu = {
- .reg = 0x230,
- .bit = 11,
- },
- .la = {
- .reg = 0x37c,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x4c,
.name = "xusb_devr",
.swgroup = TEGRA_SWGROUP_XUSB_DEV,
- .smmu = {
- .reg = 0x230,
- .bit = 12,
- },
- .la = {
- .reg = 0x380,
- .shift = 0,
- .mask = 0xff,
- .def = 0x39,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x39,
+ },
},
}, {
.id = 0x4d,
.name = "xusb_devw",
.swgroup = TEGRA_SWGROUP_XUSB_DEV,
- .smmu = {
- .reg = 0x230,
- .bit = 13,
- },
- .la = {
- .reg = 0x380,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x4e,
.name = "isprab",
.swgroup = TEGRA_SWGROUP_ISP2B,
- .smmu = {
- .reg = 0x230,
- .bit = 14,
- },
- .la = {
- .reg = 0x384,
- .shift = 0,
- .mask = 0xff,
- .def = 0x18,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x384,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x18,
+ },
},
}, {
.id = 0x50,
.name = "ispwab",
.swgroup = TEGRA_SWGROUP_ISP2B,
- .smmu = {
- .reg = 0x230,
- .bit = 16,
- },
- .la = {
- .reg = 0x388,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x51,
.name = "ispwbb",
.swgroup = TEGRA_SWGROUP_ISP2B,
- .smmu = {
- .reg = 0x230,
- .bit = 17,
- },
- .la = {
- .reg = 0x388,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x54,
.name = "tsecsrd",
.swgroup = TEGRA_SWGROUP_TSEC,
- .smmu = {
- .reg = 0x230,
- .bit = 20,
- },
- .la = {
- .reg = 0x390,
- .shift = 0,
- .mask = 0xff,
- .def = 0x9b,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x9b,
+ },
},
}, {
.id = 0x55,
.name = "tsecswr",
.swgroup = TEGRA_SWGROUP_TSEC,
- .smmu = {
- .reg = 0x230,
- .bit = 21,
- },
- .la = {
- .reg = 0x390,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x56,
.name = "a9avpscr",
.swgroup = TEGRA_SWGROUP_A9AVP,
- .smmu = {
- .reg = 0x230,
- .bit = 22,
- },
- .la = {
- .reg = 0x3a4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x3a4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x57,
.name = "a9avpscw",
.swgroup = TEGRA_SWGROUP_A9AVP,
- .smmu = {
- .reg = 0x230,
- .bit = 23,
- },
- .la = {
- .reg = 0x3a4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x3a4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x58,
.name = "gpusrd",
.swgroup = TEGRA_SWGROUP_GPU,
- .smmu = {
- /* read-only */
- .reg = 0x230,
- .bit = 24,
- },
- .la = {
- .reg = 0x3c8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1a,
+ .regs = {
+ .smmu = {
+ /* read-only */
+ .reg = 0x230,
+ .bit = 24,
+ },
+ .la = {
+ .reg = 0x3c8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
},
}, {
.id = 0x59,
.name = "gpuswr",
.swgroup = TEGRA_SWGROUP_GPU,
- .smmu = {
- /* read-only */
- .reg = 0x230,
- .bit = 25,
- },
- .la = {
- .reg = 0x3c8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ /* read-only */
+ .reg = 0x230,
+ .bit = 25,
+ },
+ .la = {
+ .reg = 0x3c8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x5a,
.name = "displayt",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x230,
- .bit = 26,
- },
- .la = {
- .reg = 0x2f0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 26,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x60,
.name = "sdmmcra",
.swgroup = TEGRA_SWGROUP_SDMMC1A,
- .smmu = {
- .reg = 0x234,
- .bit = 0,
- },
- .la = {
- .reg = 0x3b8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x49,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x3b8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
},
}, {
.id = 0x61,
.name = "sdmmcraa",
.swgroup = TEGRA_SWGROUP_SDMMC2A,
- .smmu = {
- .reg = 0x234,
- .bit = 1,
- },
- .la = {
- .reg = 0x3bc,
- .shift = 0,
- .mask = 0xff,
- .def = 0x49,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x3bc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
},
}, {
.id = 0x62,
.name = "sdmmcr",
.swgroup = TEGRA_SWGROUP_SDMMC3A,
- .smmu = {
- .reg = 0x234,
- .bit = 2,
- },
- .la = {
- .reg = 0x3c0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x49,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x3c0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
},
}, {
.id = 0x63,
.swgroup = TEGRA_SWGROUP_SDMMC4A,
.name = "sdmmcrab",
- .smmu = {
- .reg = 0x234,
- .bit = 3,
- },
- .la = {
- .reg = 0x3c4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x49,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x3c4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
},
}, {
.id = 0x64,
.name = "sdmmcwa",
.swgroup = TEGRA_SWGROUP_SDMMC1A,
- .smmu = {
- .reg = 0x234,
- .bit = 4,
- },
- .la = {
- .reg = 0x3b8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x3b8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x65,
.name = "sdmmcwaa",
.swgroup = TEGRA_SWGROUP_SDMMC2A,
- .smmu = {
- .reg = 0x234,
- .bit = 5,
- },
- .la = {
- .reg = 0x3bc,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x3bc,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x66,
.name = "sdmmcw",
.swgroup = TEGRA_SWGROUP_SDMMC3A,
- .smmu = {
- .reg = 0x234,
- .bit = 6,
- },
- .la = {
- .reg = 0x3c0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x3c0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x67,
.name = "sdmmcwab",
.swgroup = TEGRA_SWGROUP_SDMMC4A,
- .smmu = {
- .reg = 0x234,
- .bit = 7,
- },
- .la = {
- .reg = 0x3c4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 7,
+ },
+ .la = {
+ .reg = 0x3c4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x6c,
.name = "vicsrd",
.swgroup = TEGRA_SWGROUP_VIC,
- .smmu = {
- .reg = 0x234,
- .bit = 12,
- },
- .la = {
- .reg = 0x394,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1a,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x394,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
},
}, {
.id = 0x6d,
.name = "vicswr",
.swgroup = TEGRA_SWGROUP_VIC,
- .smmu = {
- .reg = 0x234,
- .bit = 13,
- },
- .la = {
- .reg = 0x394,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x394,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x72,
.name = "viw",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x234,
- .bit = 18,
- },
- .la = {
- .reg = 0x398,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x398,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x73,
.name = "displayd",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x234,
- .bit = 19,
- },
- .la = {
- .reg = 0x3c8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x3c8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
},
};
@@ -1140,6 +1274,7 @@
.resets = tegra124_mc_resets,
.num_resets = ARRAY_SIZE(tegra124_mc_resets),
.icc_ops = &tegra124_mc_icc_ops,
+ .ops = &tegra30_mc_ops,
};
#endif /* CONFIG_ARCH_TEGRA_124_SOC */
@@ -1171,5 +1306,6 @@
.resets = tegra124_mc_resets,
.num_resets = ARRAY_SIZE(tegra124_mc_resets),
.icc_ops = &tegra124_mc_icc_ops,
+ .ops = &tegra30_mc_ops,
};
#endif /* CONFIG_ARCH_TEGRA_132_SOC */
diff --git a/drivers/memory/tegra/tegra186.c b/drivers/memory/tegra/tegra186.c
index e25c954..e65eac5 100644
--- a/drivers/memory/tegra/tegra186.c
+++ b/drivers/memory/tegra/tegra186.c
@@ -1,1605 +1,878 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2017 NVIDIA CORPORATION. All rights reserved.
+ * Copyright (C) 2017-2021 NVIDIA CORPORATION. All rights reserved.
*/
#include <linux/io.h>
+#include <linux/iommu.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <soc/tegra/mc.h>
+
#if defined(CONFIG_ARCH_TEGRA_186_SOC)
#include <dt-bindings/memory/tegra186-mc.h>
#endif
-#if defined(CONFIG_ARCH_TEGRA_194_SOC)
-#include <dt-bindings/memory/tegra194-mc.h>
-#endif
+#define MC_SID_STREAMID_OVERRIDE_MASK GENMASK(7, 0)
+#define MC_SID_STREAMID_SECURITY_WRITE_ACCESS_DISABLED BIT(16)
+#define MC_SID_STREAMID_SECURITY_OVERRIDE BIT(8)
-struct tegra186_mc_client {
- const char *name;
- unsigned int sid;
- struct {
- unsigned int override;
- unsigned int security;
- } regs;
-};
-
-struct tegra186_mc_soc {
- const struct tegra186_mc_client *clients;
- unsigned int num_clients;
-};
-
-struct tegra186_mc {
- struct device *dev;
- void __iomem *regs;
-
- const struct tegra186_mc_soc *soc;
-};
-
-static void tegra186_mc_program_sid(struct tegra186_mc *mc)
+static void tegra186_mc_program_sid(struct tegra_mc *mc)
{
unsigned int i;
for (i = 0; i < mc->soc->num_clients; i++) {
- const struct tegra186_mc_client *client = &mc->soc->clients[i];
+ const struct tegra_mc_client *client = &mc->soc->clients[i];
u32 override, security;
- override = readl(mc->regs + client->regs.override);
- security = readl(mc->regs + client->regs.security);
+ override = readl(mc->regs + client->regs.sid.override);
+ security = readl(mc->regs + client->regs.sid.security);
dev_dbg(mc->dev, "client %s: override: %x security: %x\n",
client->name, override, security);
dev_dbg(mc->dev, "setting SID %u for %s\n", client->sid,
client->name);
- writel(client->sid, mc->regs + client->regs.override);
+ writel(client->sid, mc->regs + client->regs.sid.override);
- override = readl(mc->regs + client->regs.override);
- security = readl(mc->regs + client->regs.security);
+ override = readl(mc->regs + client->regs.sid.override);
+ security = readl(mc->regs + client->regs.sid.security);
dev_dbg(mc->dev, "client %s: override: %x security: %x\n",
client->name, override, security);
}
}
-#if defined(CONFIG_ARCH_TEGRA_186_SOC)
-static const struct tegra186_mc_client tegra186_mc_clients[] = {
- {
- .name = "ptcr",
- .sid = TEGRA186_SID_PASSTHROUGH,
- .regs = {
- .override = 0x000,
- .security = 0x004,
- },
- }, {
- .name = "afir",
- .sid = TEGRA186_SID_AFI,
- .regs = {
- .override = 0x070,
- .security = 0x074,
- },
- }, {
- .name = "hdar",
- .sid = TEGRA186_SID_HDA,
- .regs = {
- .override = 0x0a8,
- .security = 0x0ac,
- },
- }, {
- .name = "host1xdmar",
- .sid = TEGRA186_SID_HOST1X,
- .regs = {
- .override = 0x0b0,
- .security = 0x0b4,
- },
- }, {
- .name = "nvencsrd",
- .sid = TEGRA186_SID_NVENC,
- .regs = {
- .override = 0x0e0,
- .security = 0x0e4,
- },
- }, {
- .name = "satar",
- .sid = TEGRA186_SID_SATA,
- .regs = {
- .override = 0x0f8,
- .security = 0x0fc,
- },
- }, {
- .name = "mpcorer",
- .sid = TEGRA186_SID_PASSTHROUGH,
- .regs = {
- .override = 0x138,
- .security = 0x13c,
- },
- }, {
- .name = "nvencswr",
- .sid = TEGRA186_SID_NVENC,
- .regs = {
- .override = 0x158,
- .security = 0x15c,
- },
- }, {
- .name = "afiw",
- .sid = TEGRA186_SID_AFI,
- .regs = {
- .override = 0x188,
- .security = 0x18c,
- },
- }, {
- .name = "hdaw",
- .sid = TEGRA186_SID_HDA,
- .regs = {
- .override = 0x1a8,
- .security = 0x1ac,
- },
- }, {
- .name = "mpcorew",
- .sid = TEGRA186_SID_PASSTHROUGH,
- .regs = {
- .override = 0x1c8,
- .security = 0x1cc,
- },
- }, {
- .name = "sataw",
- .sid = TEGRA186_SID_SATA,
- .regs = {
- .override = 0x1e8,
- .security = 0x1ec,
- },
- }, {
- .name = "ispra",
- .sid = TEGRA186_SID_ISP,
- .regs = {
- .override = 0x220,
- .security = 0x224,
- },
- }, {
- .name = "ispwa",
- .sid = TEGRA186_SID_ISP,
- .regs = {
- .override = 0x230,
- .security = 0x234,
- },
- }, {
- .name = "ispwb",
- .sid = TEGRA186_SID_ISP,
- .regs = {
- .override = 0x238,
- .security = 0x23c,
- },
- }, {
- .name = "xusb_hostr",
- .sid = TEGRA186_SID_XUSB_HOST,
- .regs = {
- .override = 0x250,
- .security = 0x254,
- },
- }, {
- .name = "xusb_hostw",
- .sid = TEGRA186_SID_XUSB_HOST,
- .regs = {
- .override = 0x258,
- .security = 0x25c,
- },
- }, {
- .name = "xusb_devr",
- .sid = TEGRA186_SID_XUSB_DEV,
- .regs = {
- .override = 0x260,
- .security = 0x264,
- },
- }, {
- .name = "xusb_devw",
- .sid = TEGRA186_SID_XUSB_DEV,
- .regs = {
- .override = 0x268,
- .security = 0x26c,
- },
- }, {
- .name = "tsecsrd",
- .sid = TEGRA186_SID_TSEC,
- .regs = {
- .override = 0x2a0,
- .security = 0x2a4,
- },
- }, {
- .name = "tsecswr",
- .sid = TEGRA186_SID_TSEC,
- .regs = {
- .override = 0x2a8,
- .security = 0x2ac,
- },
- }, {
- .name = "gpusrd",
- .sid = TEGRA186_SID_GPU,
- .regs = {
- .override = 0x2c0,
- .security = 0x2c4,
- },
- }, {
- .name = "gpuswr",
- .sid = TEGRA186_SID_GPU,
- .regs = {
- .override = 0x2c8,
- .security = 0x2cc,
- },
- }, {
- .name = "sdmmcra",
- .sid = TEGRA186_SID_SDMMC1,
- .regs = {
- .override = 0x300,
- .security = 0x304,
- },
- }, {
- .name = "sdmmcraa",
- .sid = TEGRA186_SID_SDMMC2,
- .regs = {
- .override = 0x308,
- .security = 0x30c,
- },
- }, {
- .name = "sdmmcr",
- .sid = TEGRA186_SID_SDMMC3,
- .regs = {
- .override = 0x310,
- .security = 0x314,
- },
- }, {
- .name = "sdmmcrab",
- .sid = TEGRA186_SID_SDMMC4,
- .regs = {
- .override = 0x318,
- .security = 0x31c,
- },
- }, {
- .name = "sdmmcwa",
- .sid = TEGRA186_SID_SDMMC1,
- .regs = {
- .override = 0x320,
- .security = 0x324,
- },
- }, {
- .name = "sdmmcwaa",
- .sid = TEGRA186_SID_SDMMC2,
- .regs = {
- .override = 0x328,
- .security = 0x32c,
- },
- }, {
- .name = "sdmmcw",
- .sid = TEGRA186_SID_SDMMC3,
- .regs = {
- .override = 0x330,
- .security = 0x334,
- },
- }, {
- .name = "sdmmcwab",
- .sid = TEGRA186_SID_SDMMC4,
- .regs = {
- .override = 0x338,
- .security = 0x33c,
- },
- }, {
- .name = "vicsrd",
- .sid = TEGRA186_SID_VIC,
- .regs = {
- .override = 0x360,
- .security = 0x364,
- },
- }, {
- .name = "vicswr",
- .sid = TEGRA186_SID_VIC,
- .regs = {
- .override = 0x368,
- .security = 0x36c,
- },
- }, {
- .name = "viw",
- .sid = TEGRA186_SID_VI,
- .regs = {
- .override = 0x390,
- .security = 0x394,
- },
- }, {
- .name = "nvdecsrd",
- .sid = TEGRA186_SID_NVDEC,
- .regs = {
- .override = 0x3c0,
- .security = 0x3c4,
- },
- }, {
- .name = "nvdecswr",
- .sid = TEGRA186_SID_NVDEC,
- .regs = {
- .override = 0x3c8,
- .security = 0x3cc,
- },
- }, {
- .name = "aper",
- .sid = TEGRA186_SID_APE,
- .regs = {
- .override = 0x3d0,
- .security = 0x3d4,
- },
- }, {
- .name = "apew",
- .sid = TEGRA186_SID_APE,
- .regs = {
- .override = 0x3d8,
- .security = 0x3dc,
- },
- }, {
- .name = "nvjpgsrd",
- .sid = TEGRA186_SID_NVJPG,
- .regs = {
- .override = 0x3f0,
- .security = 0x3f4,
- },
- }, {
- .name = "nvjpgswr",
- .sid = TEGRA186_SID_NVJPG,
- .regs = {
- .override = 0x3f8,
- .security = 0x3fc,
- },
- }, {
- .name = "sesrd",
- .sid = TEGRA186_SID_SE,
- .regs = {
- .override = 0x400,
- .security = 0x404,
- },
- }, {
- .name = "seswr",
- .sid = TEGRA186_SID_SE,
- .regs = {
- .override = 0x408,
- .security = 0x40c,
- },
- }, {
- .name = "etrr",
- .sid = TEGRA186_SID_ETR,
- .regs = {
- .override = 0x420,
- .security = 0x424,
- },
- }, {
- .name = "etrw",
- .sid = TEGRA186_SID_ETR,
- .regs = {
- .override = 0x428,
- .security = 0x42c,
- },
- }, {
- .name = "tsecsrdb",
- .sid = TEGRA186_SID_TSECB,
- .regs = {
- .override = 0x430,
- .security = 0x434,
- },
- }, {
- .name = "tsecswrb",
- .sid = TEGRA186_SID_TSECB,
- .regs = {
- .override = 0x438,
- .security = 0x43c,
- },
- }, {
- .name = "gpusrd2",
- .sid = TEGRA186_SID_GPU,
- .regs = {
- .override = 0x440,
- .security = 0x444,
- },
- }, {
- .name = "gpuswr2",
- .sid = TEGRA186_SID_GPU,
- .regs = {
- .override = 0x448,
- .security = 0x44c,
- },
- }, {
- .name = "axisr",
- .sid = TEGRA186_SID_GPCDMA_0,
- .regs = {
- .override = 0x460,
- .security = 0x464,
- },
- }, {
- .name = "axisw",
- .sid = TEGRA186_SID_GPCDMA_0,
- .regs = {
- .override = 0x468,
- .security = 0x46c,
- },
- }, {
- .name = "eqosr",
- .sid = TEGRA186_SID_EQOS,
- .regs = {
- .override = 0x470,
- .security = 0x474,
- },
- }, {
- .name = "eqosw",
- .sid = TEGRA186_SID_EQOS,
- .regs = {
- .override = 0x478,
- .security = 0x47c,
- },
- }, {
- .name = "ufshcr",
- .sid = TEGRA186_SID_UFSHC,
- .regs = {
- .override = 0x480,
- .security = 0x484,
- },
- }, {
- .name = "ufshcw",
- .sid = TEGRA186_SID_UFSHC,
- .regs = {
- .override = 0x488,
- .security = 0x48c,
- },
- }, {
- .name = "nvdisplayr",
- .sid = TEGRA186_SID_NVDISPLAY,
- .regs = {
- .override = 0x490,
- .security = 0x494,
- },
- }, {
- .name = "bpmpr",
- .sid = TEGRA186_SID_BPMP,
- .regs = {
- .override = 0x498,
- .security = 0x49c,
- },
- }, {
- .name = "bpmpw",
- .sid = TEGRA186_SID_BPMP,
- .regs = {
- .override = 0x4a0,
- .security = 0x4a4,
- },
- }, {
- .name = "bpmpdmar",
- .sid = TEGRA186_SID_BPMP,
- .regs = {
- .override = 0x4a8,
- .security = 0x4ac,
- },
- }, {
- .name = "bpmpdmaw",
- .sid = TEGRA186_SID_BPMP,
- .regs = {
- .override = 0x4b0,
- .security = 0x4b4,
- },
- }, {
- .name = "aonr",
- .sid = TEGRA186_SID_AON,
- .regs = {
- .override = 0x4b8,
- .security = 0x4bc,
- },
- }, {
- .name = "aonw",
- .sid = TEGRA186_SID_AON,
- .regs = {
- .override = 0x4c0,
- .security = 0x4c4,
- },
- }, {
- .name = "aondmar",
- .sid = TEGRA186_SID_AON,
- .regs = {
- .override = 0x4c8,
- .security = 0x4cc,
- },
- }, {
- .name = "aondmaw",
- .sid = TEGRA186_SID_AON,
- .regs = {
- .override = 0x4d0,
- .security = 0x4d4,
- },
- }, {
- .name = "scer",
- .sid = TEGRA186_SID_SCE,
- .regs = {
- .override = 0x4d8,
- .security = 0x4dc,
- },
- }, {
- .name = "scew",
- .sid = TEGRA186_SID_SCE,
- .regs = {
- .override = 0x4e0,
- .security = 0x4e4,
- },
- }, {
- .name = "scedmar",
- .sid = TEGRA186_SID_SCE,
- .regs = {
- .override = 0x4e8,
- .security = 0x4ec,
- },
- }, {
- .name = "scedmaw",
- .sid = TEGRA186_SID_SCE,
- .regs = {
- .override = 0x4f0,
- .security = 0x4f4,
- },
- }, {
- .name = "apedmar",
- .sid = TEGRA186_SID_APE,
- .regs = {
- .override = 0x4f8,
- .security = 0x4fc,
- },
- }, {
- .name = "apedmaw",
- .sid = TEGRA186_SID_APE,
- .regs = {
- .override = 0x500,
- .security = 0x504,
- },
- }, {
- .name = "nvdisplayr1",
- .sid = TEGRA186_SID_NVDISPLAY,
- .regs = {
- .override = 0x508,
- .security = 0x50c,
- },
- }, {
- .name = "vicsrd1",
- .sid = TEGRA186_SID_VIC,
- .regs = {
- .override = 0x510,
- .security = 0x514,
- },
- }, {
- .name = "nvdecsrd1",
- .sid = TEGRA186_SID_NVDEC,
- .regs = {
- .override = 0x518,
- .security = 0x51c,
- },
- },
-};
-
-static const struct tegra186_mc_soc tegra186_mc_soc = {
- .num_clients = ARRAY_SIZE(tegra186_mc_clients),
- .clients = tegra186_mc_clients,
-};
-#endif
-
-#if defined(CONFIG_ARCH_TEGRA_194_SOC)
-static const struct tegra186_mc_client tegra194_mc_clients[] = {
- {
- .name = "ptcr",
- .sid = TEGRA194_SID_PASSTHROUGH,
- .regs = {
- .override = 0x000,
- .security = 0x004,
- },
- }, {
- .name = "miu7r",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x008,
- .security = 0x00c,
- },
- }, {
- .name = "miu7w",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x010,
- .security = 0x014,
- },
- }, {
- .name = "hdar",
- .sid = TEGRA194_SID_HDA,
- .regs = {
- .override = 0x0a8,
- .security = 0x0ac,
- },
- }, {
- .name = "host1xdmar",
- .sid = TEGRA194_SID_HOST1X,
- .regs = {
- .override = 0x0b0,
- .security = 0x0b4,
- },
- }, {
- .name = "nvencsrd",
- .sid = TEGRA194_SID_NVENC,
- .regs = {
- .override = 0x0e0,
- .security = 0x0e4,
- },
- }, {
- .name = "satar",
- .sid = TEGRA194_SID_SATA,
- .regs = {
- .override = 0x0f8,
- .security = 0x0fc,
- },
- }, {
- .name = "mpcorer",
- .sid = TEGRA194_SID_PASSTHROUGH,
- .regs = {
- .override = 0x138,
- .security = 0x13c,
- },
- }, {
- .name = "nvencswr",
- .sid = TEGRA194_SID_NVENC,
- .regs = {
- .override = 0x158,
- .security = 0x15c,
- },
- }, {
- .name = "hdaw",
- .sid = TEGRA194_SID_HDA,
- .regs = {
- .override = 0x1a8,
- .security = 0x1ac,
- },
- }, {
- .name = "mpcorew",
- .sid = TEGRA194_SID_PASSTHROUGH,
- .regs = {
- .override = 0x1c8,
- .security = 0x1cc,
- },
- }, {
- .name = "sataw",
- .sid = TEGRA194_SID_SATA,
- .regs = {
- .override = 0x1e8,
- .security = 0x1ec,
- },
- }, {
- .name = "ispra",
- .sid = TEGRA194_SID_ISP,
- .regs = {
- .override = 0x220,
- .security = 0x224,
- },
- }, {
- .name = "ispfalr",
- .sid = TEGRA194_SID_ISP_FALCON,
- .regs = {
- .override = 0x228,
- .security = 0x22c,
- },
- }, {
- .name = "ispwa",
- .sid = TEGRA194_SID_ISP,
- .regs = {
- .override = 0x230,
- .security = 0x234,
- },
- }, {
- .name = "ispwb",
- .sid = TEGRA194_SID_ISP,
- .regs = {
- .override = 0x238,
- .security = 0x23c,
- },
- }, {
- .name = "xusb_hostr",
- .sid = TEGRA194_SID_XUSB_HOST,
- .regs = {
- .override = 0x250,
- .security = 0x254,
- },
- }, {
- .name = "xusb_hostw",
- .sid = TEGRA194_SID_XUSB_HOST,
- .regs = {
- .override = 0x258,
- .security = 0x25c,
- },
- }, {
- .name = "xusb_devr",
- .sid = TEGRA194_SID_XUSB_DEV,
- .regs = {
- .override = 0x260,
- .security = 0x264,
- },
- }, {
- .name = "xusb_devw",
- .sid = TEGRA194_SID_XUSB_DEV,
- .regs = {
- .override = 0x268,
- .security = 0x26c,
- },
- }, {
- .name = "sdmmcra",
- .sid = TEGRA194_SID_SDMMC1,
- .regs = {
- .override = 0x300,
- .security = 0x304,
- },
- }, {
- .name = "sdmmcr",
- .sid = TEGRA194_SID_SDMMC3,
- .regs = {
- .override = 0x310,
- .security = 0x314,
- },
- }, {
- .name = "sdmmcrab",
- .sid = TEGRA194_SID_SDMMC4,
- .regs = {
- .override = 0x318,
- .security = 0x31c,
- },
- }, {
- .name = "sdmmcwa",
- .sid = TEGRA194_SID_SDMMC1,
- .regs = {
- .override = 0x320,
- .security = 0x324,
- },
- }, {
- .name = "sdmmcw",
- .sid = TEGRA194_SID_SDMMC3,
- .regs = {
- .override = 0x330,
- .security = 0x334,
- },
- }, {
- .name = "sdmmcwab",
- .sid = TEGRA194_SID_SDMMC4,
- .regs = {
- .override = 0x338,
- .security = 0x33c,
- },
- }, {
- .name = "vicsrd",
- .sid = TEGRA194_SID_VIC,
- .regs = {
- .override = 0x360,
- .security = 0x364,
- },
- }, {
- .name = "vicswr",
- .sid = TEGRA194_SID_VIC,
- .regs = {
- .override = 0x368,
- .security = 0x36c,
- },
- }, {
- .name = "viw",
- .sid = TEGRA194_SID_VI,
- .regs = {
- .override = 0x390,
- .security = 0x394,
- },
- }, {
- .name = "nvdecsrd",
- .sid = TEGRA194_SID_NVDEC,
- .regs = {
- .override = 0x3c0,
- .security = 0x3c4,
- },
- }, {
- .name = "nvdecswr",
- .sid = TEGRA194_SID_NVDEC,
- .regs = {
- .override = 0x3c8,
- .security = 0x3cc,
- },
- }, {
- .name = "aper",
- .sid = TEGRA194_SID_APE,
- .regs = {
- .override = 0x3c0,
- .security = 0x3c4,
- },
- }, {
- .name = "apew",
- .sid = TEGRA194_SID_APE,
- .regs = {
- .override = 0x3d0,
- .security = 0x3d4,
- },
- }, {
- .name = "nvjpgsrd",
- .sid = TEGRA194_SID_NVJPG,
- .regs = {
- .override = 0x3f0,
- .security = 0x3f4,
- },
- }, {
- .name = "nvjpgswr",
- .sid = TEGRA194_SID_NVJPG,
- .regs = {
- .override = 0x3f0,
- .security = 0x3f4,
- },
- }, {
- .name = "axiapr",
- .sid = TEGRA194_SID_PASSTHROUGH,
- .regs = {
- .override = 0x410,
- .security = 0x414,
- },
- }, {
- .name = "axiapw",
- .sid = TEGRA194_SID_PASSTHROUGH,
- .regs = {
- .override = 0x418,
- .security = 0x41c,
- },
- }, {
- .name = "etrr",
- .sid = TEGRA194_SID_ETR,
- .regs = {
- .override = 0x420,
- .security = 0x424,
- },
- }, {
- .name = "etrw",
- .sid = TEGRA194_SID_ETR,
- .regs = {
- .override = 0x428,
- .security = 0x42c,
- },
- }, {
- .name = "axisr",
- .sid = TEGRA194_SID_PASSTHROUGH,
- .regs = {
- .override = 0x460,
- .security = 0x464,
- },
- }, {
- .name = "axisw",
- .sid = TEGRA194_SID_PASSTHROUGH,
- .regs = {
- .override = 0x468,
- .security = 0x46c,
- },
- }, {
- .name = "eqosr",
- .sid = TEGRA194_SID_EQOS,
- .regs = {
- .override = 0x470,
- .security = 0x474,
- },
- }, {
- .name = "eqosw",
- .sid = TEGRA194_SID_EQOS,
- .regs = {
- .override = 0x478,
- .security = 0x47c,
- },
- }, {
- .name = "ufshcr",
- .sid = TEGRA194_SID_UFSHC,
- .regs = {
- .override = 0x480,
- .security = 0x484,
- },
- }, {
- .name = "ufshcw",
- .sid = TEGRA194_SID_UFSHC,
- .regs = {
- .override = 0x488,
- .security = 0x48c,
- },
- }, {
- .name = "nvdisplayr",
- .sid = TEGRA194_SID_NVDISPLAY,
- .regs = {
- .override = 0x490,
- .security = 0x494,
- },
- }, {
- .name = "bpmpr",
- .sid = TEGRA194_SID_BPMP,
- .regs = {
- .override = 0x498,
- .security = 0x49c,
- },
- }, {
- .name = "bpmpw",
- .sid = TEGRA194_SID_BPMP,
- .regs = {
- .override = 0x4a0,
- .security = 0x4a4,
- },
- }, {
- .name = "bpmpdmar",
- .sid = TEGRA194_SID_BPMP,
- .regs = {
- .override = 0x4a8,
- .security = 0x4ac,
- },
- }, {
- .name = "bpmpdmaw",
- .sid = TEGRA194_SID_BPMP,
- .regs = {
- .override = 0x4b0,
- .security = 0x4b4,
- },
- }, {
- .name = "aonr",
- .sid = TEGRA194_SID_AON,
- .regs = {
- .override = 0x4b8,
- .security = 0x4bc,
- },
- }, {
- .name = "aonw",
- .sid = TEGRA194_SID_AON,
- .regs = {
- .override = 0x4c0,
- .security = 0x4c4,
- },
- }, {
- .name = "aondmar",
- .sid = TEGRA194_SID_AON,
- .regs = {
- .override = 0x4c8,
- .security = 0x4cc,
- },
- }, {
- .name = "aondmaw",
- .sid = TEGRA194_SID_AON,
- .regs = {
- .override = 0x4d0,
- .security = 0x4d4,
- },
- }, {
- .name = "scer",
- .sid = TEGRA194_SID_SCE,
- .regs = {
- .override = 0x4d8,
- .security = 0x4dc,
- },
- }, {
- .name = "scew",
- .sid = TEGRA194_SID_SCE,
- .regs = {
- .override = 0x4e0,
- .security = 0x4e4,
- },
- }, {
- .name = "scedmar",
- .sid = TEGRA194_SID_SCE,
- .regs = {
- .override = 0x4e8,
- .security = 0x4ec,
- },
- }, {
- .name = "scedmaw",
- .sid = TEGRA194_SID_SCE,
- .regs = {
- .override = 0x4f0,
- .security = 0x4f4,
- },
- }, {
- .name = "apedmar",
- .sid = TEGRA194_SID_APE,
- .regs = {
- .override = 0x4f8,
- .security = 0x4fc,
- },
- }, {
- .name = "apedmaw",
- .sid = TEGRA194_SID_APE,
- .regs = {
- .override = 0x500,
- .security = 0x504,
- },
- }, {
- .name = "nvdisplayr1",
- .sid = TEGRA194_SID_NVDISPLAY,
- .regs = {
- .override = 0x508,
- .security = 0x50c,
- },
- }, {
- .name = "vicsrd1",
- .sid = TEGRA194_SID_VIC,
- .regs = {
- .override = 0x510,
- .security = 0x514,
- },
- }, {
- .name = "nvdecsrd1",
- .sid = TEGRA194_SID_NVDEC,
- .regs = {
- .override = 0x518,
- .security = 0x51c,
- },
- }, {
- .name = "miu0r",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x530,
- .security = 0x534,
- },
- }, {
- .name = "miu0w",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x538,
- .security = 0x53c,
- },
- }, {
- .name = "miu1r",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x540,
- .security = 0x544,
- },
- }, {
- .name = "miu1w",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x548,
- .security = 0x54c,
- },
- }, {
- .name = "miu2r",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x570,
- .security = 0x574,
- },
- }, {
- .name = "miu2w",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x578,
- .security = 0x57c,
- },
- }, {
- .name = "miu3r",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x580,
- .security = 0x584,
- },
- }, {
- .name = "miu3w",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x588,
- .security = 0x58c,
- },
- }, {
- .name = "miu4r",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x590,
- .security = 0x594,
- },
- }, {
- .name = "miu4w",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x598,
- .security = 0x59c,
- },
- }, {
- .name = "dpmur",
- .sid = TEGRA194_SID_PASSTHROUGH,
- .regs = {
- .override = 0x598,
- .security = 0x59c,
- },
- }, {
- .name = "vifalr",
- .sid = TEGRA194_SID_VI_FALCON,
- .regs = {
- .override = 0x5e0,
- .security = 0x5e4,
- },
- }, {
- .name = "vifalw",
- .sid = TEGRA194_SID_VI_FALCON,
- .regs = {
- .override = 0x5e8,
- .security = 0x5ec,
- },
- }, {
- .name = "dla0rda",
- .sid = TEGRA194_SID_NVDLA0,
- .regs = {
- .override = 0x5f0,
- .security = 0x5f4,
- },
- }, {
- .name = "dla0falrdb",
- .sid = TEGRA194_SID_NVDLA0,
- .regs = {
- .override = 0x5f8,
- .security = 0x5fc,
- },
- }, {
- .name = "dla0wra",
- .sid = TEGRA194_SID_NVDLA0,
- .regs = {
- .override = 0x600,
- .security = 0x604,
- },
- }, {
- .name = "dla0falwrb",
- .sid = TEGRA194_SID_NVDLA0,
- .regs = {
- .override = 0x608,
- .security = 0x60c,
- },
- }, {
- .name = "dla1rda",
- .sid = TEGRA194_SID_NVDLA1,
- .regs = {
- .override = 0x610,
- .security = 0x614,
- },
- }, {
- .name = "dla1falrdb",
- .sid = TEGRA194_SID_NVDLA1,
- .regs = {
- .override = 0x618,
- .security = 0x61c,
- },
- }, {
- .name = "dla1wra",
- .sid = TEGRA194_SID_NVDLA1,
- .regs = {
- .override = 0x620,
- .security = 0x624,
- },
- }, {
- .name = "dla1falwrb",
- .sid = TEGRA194_SID_NVDLA1,
- .regs = {
- .override = 0x628,
- .security = 0x62c,
- },
- }, {
- .name = "pva0rda",
- .sid = TEGRA194_SID_PVA0,
- .regs = {
- .override = 0x630,
- .security = 0x634,
- },
- }, {
- .name = "pva0rdb",
- .sid = TEGRA194_SID_PVA0,
- .regs = {
- .override = 0x638,
- .security = 0x63c,
- },
- }, {
- .name = "pva0rdc",
- .sid = TEGRA194_SID_PVA0,
- .regs = {
- .override = 0x640,
- .security = 0x644,
- },
- }, {
- .name = "pva0wra",
- .sid = TEGRA194_SID_PVA0,
- .regs = {
- .override = 0x648,
- .security = 0x64c,
- },
- }, {
- .name = "pva0wrb",
- .sid = TEGRA194_SID_PVA0,
- .regs = {
- .override = 0x650,
- .security = 0x654,
- },
- }, {
- .name = "pva0wrc",
- .sid = TEGRA194_SID_PVA0,
- .regs = {
- .override = 0x658,
- .security = 0x65c,
- },
- }, {
- .name = "pva1rda",
- .sid = TEGRA194_SID_PVA1,
- .regs = {
- .override = 0x660,
- .security = 0x664,
- },
- }, {
- .name = "pva1rdb",
- .sid = TEGRA194_SID_PVA1,
- .regs = {
- .override = 0x668,
- .security = 0x66c,
- },
- }, {
- .name = "pva1rdc",
- .sid = TEGRA194_SID_PVA1,
- .regs = {
- .override = 0x670,
- .security = 0x674,
- },
- }, {
- .name = "pva1wra",
- .sid = TEGRA194_SID_PVA1,
- .regs = {
- .override = 0x678,
- .security = 0x67c,
- },
- }, {
- .name = "pva1wrb",
- .sid = TEGRA194_SID_PVA1,
- .regs = {
- .override = 0x680,
- .security = 0x684,
- },
- }, {
- .name = "pva1wrc",
- .sid = TEGRA194_SID_PVA1,
- .regs = {
- .override = 0x688,
- .security = 0x68c,
- },
- }, {
- .name = "rcer",
- .sid = TEGRA194_SID_RCE,
- .regs = {
- .override = 0x690,
- .security = 0x694,
- },
- }, {
- .name = "rcew",
- .sid = TEGRA194_SID_RCE,
- .regs = {
- .override = 0x698,
- .security = 0x69c,
- },
- }, {
- .name = "rcedmar",
- .sid = TEGRA194_SID_RCE,
- .regs = {
- .override = 0x6a0,
- .security = 0x6a4,
- },
- }, {
- .name = "rcedmaw",
- .sid = TEGRA194_SID_RCE,
- .regs = {
- .override = 0x6a8,
- .security = 0x6ac,
- },
- }, {
- .name = "nvenc1srd",
- .sid = TEGRA194_SID_NVENC1,
- .regs = {
- .override = 0x6b0,
- .security = 0x6b4,
- },
- }, {
- .name = "nvenc1swr",
- .sid = TEGRA194_SID_NVENC1,
- .regs = {
- .override = 0x6b8,
- .security = 0x6bc,
- },
- }, {
- .name = "pcie0r",
- .sid = TEGRA194_SID_PCIE0,
- .regs = {
- .override = 0x6c0,
- .security = 0x6c4,
- },
- }, {
- .name = "pcie0w",
- .sid = TEGRA194_SID_PCIE0,
- .regs = {
- .override = 0x6c8,
- .security = 0x6cc,
- },
- }, {
- .name = "pcie1r",
- .sid = TEGRA194_SID_PCIE1,
- .regs = {
- .override = 0x6d0,
- .security = 0x6d4,
- },
- }, {
- .name = "pcie1w",
- .sid = TEGRA194_SID_PCIE1,
- .regs = {
- .override = 0x6d8,
- .security = 0x6dc,
- },
- }, {
- .name = "pcie2ar",
- .sid = TEGRA194_SID_PCIE2,
- .regs = {
- .override = 0x6e0,
- .security = 0x6e4,
- },
- }, {
- .name = "pcie2aw",
- .sid = TEGRA194_SID_PCIE2,
- .regs = {
- .override = 0x6e8,
- .security = 0x6ec,
- },
- }, {
- .name = "pcie3r",
- .sid = TEGRA194_SID_PCIE3,
- .regs = {
- .override = 0x6f0,
- .security = 0x6f4,
- },
- }, {
- .name = "pcie3w",
- .sid = TEGRA194_SID_PCIE3,
- .regs = {
- .override = 0x6f8,
- .security = 0x6fc,
- },
- }, {
- .name = "pcie4r",
- .sid = TEGRA194_SID_PCIE4,
- .regs = {
- .override = 0x700,
- .security = 0x704,
- },
- }, {
- .name = "pcie4w",
- .sid = TEGRA194_SID_PCIE4,
- .regs = {
- .override = 0x708,
- .security = 0x70c,
- },
- }, {
- .name = "pcie5r",
- .sid = TEGRA194_SID_PCIE5,
- .regs = {
- .override = 0x710,
- .security = 0x714,
- },
- }, {
- .name = "pcie5w",
- .sid = TEGRA194_SID_PCIE5,
- .regs = {
- .override = 0x718,
- .security = 0x71c,
- },
- }, {
- .name = "ispfalw",
- .sid = TEGRA194_SID_ISP_FALCON,
- .regs = {
- .override = 0x720,
- .security = 0x724,
- },
- }, {
- .name = "dla0rda1",
- .sid = TEGRA194_SID_NVDLA0,
- .regs = {
- .override = 0x748,
- .security = 0x74c,
- },
- }, {
- .name = "dla1rda1",
- .sid = TEGRA194_SID_NVDLA1,
- .regs = {
- .override = 0x750,
- .security = 0x754,
- },
- }, {
- .name = "pva0rda1",
- .sid = TEGRA194_SID_PVA0,
- .regs = {
- .override = 0x758,
- .security = 0x75c,
- },
- }, {
- .name = "pva0rdb1",
- .sid = TEGRA194_SID_PVA0,
- .regs = {
- .override = 0x760,
- .security = 0x764,
- },
- }, {
- .name = "pva1rda1",
- .sid = TEGRA194_SID_PVA1,
- .regs = {
- .override = 0x768,
- .security = 0x76c,
- },
- }, {
- .name = "pva1rdb1",
- .sid = TEGRA194_SID_PVA1,
- .regs = {
- .override = 0x770,
- .security = 0x774,
- },
- }, {
- .name = "pcie5r1",
- .sid = TEGRA194_SID_PCIE5,
- .regs = {
- .override = 0x778,
- .security = 0x77c,
- },
- }, {
- .name = "nvencsrd1",
- .sid = TEGRA194_SID_NVENC,
- .regs = {
- .override = 0x780,
- .security = 0x784,
- },
- }, {
- .name = "nvenc1srd1",
- .sid = TEGRA194_SID_NVENC1,
- .regs = {
- .override = 0x788,
- .security = 0x78c,
- },
- }, {
- .name = "ispra1",
- .sid = TEGRA194_SID_ISP,
- .regs = {
- .override = 0x790,
- .security = 0x794,
- },
- }, {
- .name = "pcie0r1",
- .sid = TEGRA194_SID_PCIE0,
- .regs = {
- .override = 0x798,
- .security = 0x79c,
- },
- }, {
- .name = "nvdec1srd",
- .sid = TEGRA194_SID_NVDEC1,
- .regs = {
- .override = 0x7c8,
- .security = 0x7cc,
- },
- }, {
- .name = "nvdec1srd1",
- .sid = TEGRA194_SID_NVDEC1,
- .regs = {
- .override = 0x7d0,
- .security = 0x7d4,
- },
- }, {
- .name = "nvdec1swr",
- .sid = TEGRA194_SID_NVDEC1,
- .regs = {
- .override = 0x7d8,
- .security = 0x7dc,
- },
- }, {
- .name = "miu5r",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x7e0,
- .security = 0x7e4,
- },
- }, {
- .name = "miu5w",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x7e8,
- .security = 0x7ec,
- },
- }, {
- .name = "miu6r",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x7f0,
- .security = 0x7f4,
- },
- }, {
- .name = "miu6w",
- .sid = TEGRA194_SID_MIU,
- .regs = {
- .override = 0x7f8,
- .security = 0x7fc,
- },
- },
-};
-
-static const struct tegra186_mc_soc tegra194_mc_soc = {
- .num_clients = ARRAY_SIZE(tegra194_mc_clients),
- .clients = tegra194_mc_clients,
-};
-#endif
-
-static int tegra186_mc_probe(struct platform_device *pdev)
+static int tegra186_mc_probe(struct tegra_mc *mc)
{
- struct tegra186_mc *mc;
- struct resource *res;
int err;
- mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
- if (!mc)
- return -ENOMEM;
-
- mc->soc = of_device_get_match_data(&pdev->dev);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mc->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(mc->regs))
- return PTR_ERR(mc->regs);
-
- mc->dev = &pdev->dev;
-
- err = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+ err = of_platform_populate(mc->dev->of_node, NULL, NULL, mc->dev);
if (err < 0)
return err;
- platform_set_drvdata(pdev, mc);
tegra186_mc_program_sid(mc);
return 0;
}
-static int tegra186_mc_remove(struct platform_device *pdev)
+static void tegra186_mc_remove(struct tegra_mc *mc)
{
- struct tegra186_mc *mc = platform_get_drvdata(pdev);
-
of_platform_depopulate(mc->dev);
-
- return 0;
}
-static const struct of_device_id tegra186_mc_of_match[] = {
-#if defined(CONFIG_ARCH_TEGRA_186_SOC)
- { .compatible = "nvidia,tegra186-mc", .data = &tegra186_mc_soc },
-#endif
-#if defined(CONFIG_ARCH_TEGRA_194_SOC)
- { .compatible = "nvidia,tegra194-mc", .data = &tegra194_mc_soc },
-#endif
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, tegra186_mc_of_match);
-
-static int __maybe_unused tegra186_mc_suspend(struct device *dev)
+static int tegra186_mc_resume(struct tegra_mc *mc)
{
- return 0;
-}
-
-static int __maybe_unused tegra186_mc_resume(struct device *dev)
-{
- struct tegra186_mc *mc = dev_get_drvdata(dev);
-
tegra186_mc_program_sid(mc);
return 0;
}
-static const struct dev_pm_ops tegra186_mc_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(tegra186_mc_suspend, tegra186_mc_resume)
-};
+static void tegra186_mc_client_sid_override(struct tegra_mc *mc,
+ const struct tegra_mc_client *client,
+ unsigned int sid)
+{
+ u32 value, old;
-static struct platform_driver tegra186_mc_driver = {
- .driver = {
- .name = "tegra186-mc",
- .of_match_table = tegra186_mc_of_match,
- .pm = &tegra186_mc_pm_ops,
- .suppress_bind_attrs = true,
- },
+ value = readl(mc->regs + client->regs.sid.security);
+ if ((value & MC_SID_STREAMID_SECURITY_OVERRIDE) == 0) {
+ /*
+ * If the secure firmware has locked this down the override
+ * for this memory client, there's nothing we can do here.
+ */
+ if (value & MC_SID_STREAMID_SECURITY_WRITE_ACCESS_DISABLED)
+ return;
+
+ /*
+ * Otherwise, try to set the override itself. Typically the
+ * secure firmware will never have set this configuration.
+ * Instead, it will either have disabled write access to
+ * this field, or it will already have set an explicit
+ * override itself.
+ */
+ WARN_ON((value & MC_SID_STREAMID_SECURITY_OVERRIDE) == 0);
+
+ value |= MC_SID_STREAMID_SECURITY_OVERRIDE;
+ writel(value, mc->regs + client->regs.sid.security);
+ }
+
+ value = readl(mc->regs + client->regs.sid.override);
+ old = value & MC_SID_STREAMID_OVERRIDE_MASK;
+
+ if (old != sid) {
+ dev_dbg(mc->dev, "overriding SID %x for %s with %x\n", old,
+ client->name, sid);
+ writel(sid, mc->regs + client->regs.sid.override);
+ }
+}
+
+static int tegra186_mc_probe_device(struct tegra_mc *mc, struct device *dev)
+{
+#if IS_ENABLED(CONFIG_IOMMU_API)
+ struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ struct of_phandle_args args;
+ unsigned int i, index = 0;
+
+ while (!of_parse_phandle_with_args(dev->of_node, "interconnects", "#interconnect-cells",
+ index, &args)) {
+ if (args.np == mc->dev->of_node && args.args_count != 0) {
+ for (i = 0; i < mc->soc->num_clients; i++) {
+ const struct tegra_mc_client *client = &mc->soc->clients[i];
+
+ if (client->id == args.args[0]) {
+ u32 sid = fwspec->ids[0] & MC_SID_STREAMID_OVERRIDE_MASK;
+
+ tegra186_mc_client_sid_override(mc, client, sid);
+ }
+ }
+ }
+
+ index++;
+ }
+#endif
+
+ return 0;
+}
+
+const struct tegra_mc_ops tegra186_mc_ops = {
.probe = tegra186_mc_probe,
.remove = tegra186_mc_remove,
+ .resume = tegra186_mc_resume,
+ .probe_device = tegra186_mc_probe_device,
};
-module_platform_driver(tegra186_mc_driver);
-MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
-MODULE_DESCRIPTION("NVIDIA Tegra186 Memory Controller driver");
-MODULE_LICENSE("GPL v2");
+#if defined(CONFIG_ARCH_TEGRA_186_SOC)
+static const struct tegra_mc_client tegra186_mc_clients[] = {
+ {
+ .id = TEGRA186_MEMORY_CLIENT_PTCR,
+ .name = "ptcr",
+ .sid = TEGRA186_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x000,
+ .security = 0x004,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_AFIR,
+ .name = "afir",
+ .sid = TEGRA186_SID_AFI,
+ .regs = {
+ .sid = {
+ .override = 0x070,
+ .security = 0x074,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_HDAR,
+ .name = "hdar",
+ .sid = TEGRA186_SID_HDA,
+ .regs = {
+ .sid = {
+ .override = 0x0a8,
+ .security = 0x0ac,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_HOST1XDMAR,
+ .name = "host1xdmar",
+ .sid = TEGRA186_SID_HOST1X,
+ .regs = {
+ .sid = {
+ .override = 0x0b0,
+ .security = 0x0b4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_NVENCSRD,
+ .name = "nvencsrd",
+ .sid = TEGRA186_SID_NVENC,
+ .regs = {
+ .sid = {
+ .override = 0x0e0,
+ .security = 0x0e4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SATAR,
+ .name = "satar",
+ .sid = TEGRA186_SID_SATA,
+ .regs = {
+ .sid = {
+ .override = 0x0f8,
+ .security = 0x0fc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_MPCORER,
+ .name = "mpcorer",
+ .sid = TEGRA186_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x138,
+ .security = 0x13c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_NVENCSWR,
+ .name = "nvencswr",
+ .sid = TEGRA186_SID_NVENC,
+ .regs = {
+ .sid = {
+ .override = 0x158,
+ .security = 0x15c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_AFIW,
+ .name = "afiw",
+ .sid = TEGRA186_SID_AFI,
+ .regs = {
+ .sid = {
+ .override = 0x188,
+ .security = 0x18c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_HDAW,
+ .name = "hdaw",
+ .sid = TEGRA186_SID_HDA,
+ .regs = {
+ .sid = {
+ .override = 0x1a8,
+ .security = 0x1ac,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_MPCOREW,
+ .name = "mpcorew",
+ .sid = TEGRA186_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x1c8,
+ .security = 0x1cc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SATAW,
+ .name = "sataw",
+ .sid = TEGRA186_SID_SATA,
+ .regs = {
+ .sid = {
+ .override = 0x1e8,
+ .security = 0x1ec,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_ISPRA,
+ .name = "ispra",
+ .sid = TEGRA186_SID_ISP,
+ .regs = {
+ .sid = {
+ .override = 0x220,
+ .security = 0x224,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_ISPWA,
+ .name = "ispwa",
+ .sid = TEGRA186_SID_ISP,
+ .regs = {
+ .sid = {
+ .override = 0x230,
+ .security = 0x234,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_ISPWB,
+ .name = "ispwb",
+ .sid = TEGRA186_SID_ISP,
+ .regs = {
+ .sid = {
+ .override = 0x238,
+ .security = 0x23c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_XUSB_HOSTR,
+ .name = "xusb_hostr",
+ .sid = TEGRA186_SID_XUSB_HOST,
+ .regs = {
+ .sid = {
+ .override = 0x250,
+ .security = 0x254,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_XUSB_HOSTW,
+ .name = "xusb_hostw",
+ .sid = TEGRA186_SID_XUSB_HOST,
+ .regs = {
+ .sid = {
+ .override = 0x258,
+ .security = 0x25c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_XUSB_DEVR,
+ .name = "xusb_devr",
+ .sid = TEGRA186_SID_XUSB_DEV,
+ .regs = {
+ .sid = {
+ .override = 0x260,
+ .security = 0x264,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_XUSB_DEVW,
+ .name = "xusb_devw",
+ .sid = TEGRA186_SID_XUSB_DEV,
+ .regs = {
+ .sid = {
+ .override = 0x268,
+ .security = 0x26c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_TSECSRD,
+ .name = "tsecsrd",
+ .sid = TEGRA186_SID_TSEC,
+ .regs = {
+ .sid = {
+ .override = 0x2a0,
+ .security = 0x2a4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_TSECSWR,
+ .name = "tsecswr",
+ .sid = TEGRA186_SID_TSEC,
+ .regs = {
+ .sid = {
+ .override = 0x2a8,
+ .security = 0x2ac,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_GPUSRD,
+ .name = "gpusrd",
+ .sid = TEGRA186_SID_GPU,
+ .regs = {
+ .sid = {
+ .override = 0x2c0,
+ .security = 0x2c4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_GPUSWR,
+ .name = "gpuswr",
+ .sid = TEGRA186_SID_GPU,
+ .regs = {
+ .sid = {
+ .override = 0x2c8,
+ .security = 0x2cc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SDMMCRA,
+ .name = "sdmmcra",
+ .sid = TEGRA186_SID_SDMMC1,
+ .regs = {
+ .sid = {
+ .override = 0x300,
+ .security = 0x304,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SDMMCRAA,
+ .name = "sdmmcraa",
+ .sid = TEGRA186_SID_SDMMC2,
+ .regs = {
+ .sid = {
+ .override = 0x308,
+ .security = 0x30c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SDMMCR,
+ .name = "sdmmcr",
+ .sid = TEGRA186_SID_SDMMC3,
+ .regs = {
+ .sid = {
+ .override = 0x310,
+ .security = 0x314,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SDMMCRAB,
+ .name = "sdmmcrab",
+ .sid = TEGRA186_SID_SDMMC4,
+ .regs = {
+ .sid = {
+ .override = 0x318,
+ .security = 0x31c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SDMMCWA,
+ .name = "sdmmcwa",
+ .sid = TEGRA186_SID_SDMMC1,
+ .regs = {
+ .sid = {
+ .override = 0x320,
+ .security = 0x324,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SDMMCWAA,
+ .name = "sdmmcwaa",
+ .sid = TEGRA186_SID_SDMMC2,
+ .regs = {
+ .sid = {
+ .override = 0x328,
+ .security = 0x32c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SDMMCW,
+ .name = "sdmmcw",
+ .sid = TEGRA186_SID_SDMMC3,
+ .regs = {
+ .sid = {
+ .override = 0x330,
+ .security = 0x334,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SDMMCWAB,
+ .name = "sdmmcwab",
+ .sid = TEGRA186_SID_SDMMC4,
+ .regs = {
+ .sid = {
+ .override = 0x338,
+ .security = 0x33c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_VICSRD,
+ .name = "vicsrd",
+ .sid = TEGRA186_SID_VIC,
+ .regs = {
+ .sid = {
+ .override = 0x360,
+ .security = 0x364,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_VICSWR,
+ .name = "vicswr",
+ .sid = TEGRA186_SID_VIC,
+ .regs = {
+ .sid = {
+ .override = 0x368,
+ .security = 0x36c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_VIW,
+ .name = "viw",
+ .sid = TEGRA186_SID_VI,
+ .regs = {
+ .sid = {
+ .override = 0x390,
+ .security = 0x394,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_NVDECSRD,
+ .name = "nvdecsrd",
+ .sid = TEGRA186_SID_NVDEC,
+ .regs = {
+ .sid = {
+ .override = 0x3c0,
+ .security = 0x3c4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_NVDECSWR,
+ .name = "nvdecswr",
+ .sid = TEGRA186_SID_NVDEC,
+ .regs = {
+ .sid = {
+ .override = 0x3c8,
+ .security = 0x3cc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_APER,
+ .name = "aper",
+ .sid = TEGRA186_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x3d0,
+ .security = 0x3d4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_APEW,
+ .name = "apew",
+ .sid = TEGRA186_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x3d8,
+ .security = 0x3dc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_NVJPGSRD,
+ .name = "nvjpgsrd",
+ .sid = TEGRA186_SID_NVJPG,
+ .regs = {
+ .sid = {
+ .override = 0x3f0,
+ .security = 0x3f4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_NVJPGSWR,
+ .name = "nvjpgswr",
+ .sid = TEGRA186_SID_NVJPG,
+ .regs = {
+ .sid = {
+ .override = 0x3f8,
+ .security = 0x3fc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SESRD,
+ .name = "sesrd",
+ .sid = TEGRA186_SID_SE,
+ .regs = {
+ .sid = {
+ .override = 0x400,
+ .security = 0x404,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SESWR,
+ .name = "seswr",
+ .sid = TEGRA186_SID_SE,
+ .regs = {
+ .sid = {
+ .override = 0x408,
+ .security = 0x40c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_ETRR,
+ .name = "etrr",
+ .sid = TEGRA186_SID_ETR,
+ .regs = {
+ .sid = {
+ .override = 0x420,
+ .security = 0x424,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_ETRW,
+ .name = "etrw",
+ .sid = TEGRA186_SID_ETR,
+ .regs = {
+ .sid = {
+ .override = 0x428,
+ .security = 0x42c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_TSECSRDB,
+ .name = "tsecsrdb",
+ .sid = TEGRA186_SID_TSECB,
+ .regs = {
+ .sid = {
+ .override = 0x430,
+ .security = 0x434,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_TSECSWRB,
+ .name = "tsecswrb",
+ .sid = TEGRA186_SID_TSECB,
+ .regs = {
+ .sid = {
+ .override = 0x438,
+ .security = 0x43c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_GPUSRD2,
+ .name = "gpusrd2",
+ .sid = TEGRA186_SID_GPU,
+ .regs = {
+ .sid = {
+ .override = 0x440,
+ .security = 0x444,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_GPUSWR2,
+ .name = "gpuswr2",
+ .sid = TEGRA186_SID_GPU,
+ .regs = {
+ .sid = {
+ .override = 0x448,
+ .security = 0x44c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_AXISR,
+ .name = "axisr",
+ .sid = TEGRA186_SID_GPCDMA_0,
+ .regs = {
+ .sid = {
+ .override = 0x460,
+ .security = 0x464,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_AXISW,
+ .name = "axisw",
+ .sid = TEGRA186_SID_GPCDMA_0,
+ .regs = {
+ .sid = {
+ .override = 0x468,
+ .security = 0x46c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_EQOSR,
+ .name = "eqosr",
+ .sid = TEGRA186_SID_EQOS,
+ .regs = {
+ .sid = {
+ .override = 0x470,
+ .security = 0x474,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_EQOSW,
+ .name = "eqosw",
+ .sid = TEGRA186_SID_EQOS,
+ .regs = {
+ .sid = {
+ .override = 0x478,
+ .security = 0x47c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_UFSHCR,
+ .name = "ufshcr",
+ .sid = TEGRA186_SID_UFSHC,
+ .regs = {
+ .sid = {
+ .override = 0x480,
+ .security = 0x484,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_UFSHCW,
+ .name = "ufshcw",
+ .sid = TEGRA186_SID_UFSHC,
+ .regs = {
+ .sid = {
+ .override = 0x488,
+ .security = 0x48c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_NVDISPLAYR,
+ .name = "nvdisplayr",
+ .sid = TEGRA186_SID_NVDISPLAY,
+ .regs = {
+ .sid = {
+ .override = 0x490,
+ .security = 0x494,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_BPMPR,
+ .name = "bpmpr",
+ .sid = TEGRA186_SID_BPMP,
+ .regs = {
+ .sid = {
+ .override = 0x498,
+ .security = 0x49c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_BPMPW,
+ .name = "bpmpw",
+ .sid = TEGRA186_SID_BPMP,
+ .regs = {
+ .sid = {
+ .override = 0x4a0,
+ .security = 0x4a4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_BPMPDMAR,
+ .name = "bpmpdmar",
+ .sid = TEGRA186_SID_BPMP,
+ .regs = {
+ .sid = {
+ .override = 0x4a8,
+ .security = 0x4ac,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_BPMPDMAW,
+ .name = "bpmpdmaw",
+ .sid = TEGRA186_SID_BPMP,
+ .regs = {
+ .sid = {
+ .override = 0x4b0,
+ .security = 0x4b4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_AONR,
+ .name = "aonr",
+ .sid = TEGRA186_SID_AON,
+ .regs = {
+ .sid = {
+ .override = 0x4b8,
+ .security = 0x4bc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_AONW,
+ .name = "aonw",
+ .sid = TEGRA186_SID_AON,
+ .regs = {
+ .sid = {
+ .override = 0x4c0,
+ .security = 0x4c4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_AONDMAR,
+ .name = "aondmar",
+ .sid = TEGRA186_SID_AON,
+ .regs = {
+ .sid = {
+ .override = 0x4c8,
+ .security = 0x4cc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_AONDMAW,
+ .name = "aondmaw",
+ .sid = TEGRA186_SID_AON,
+ .regs = {
+ .sid = {
+ .override = 0x4d0,
+ .security = 0x4d4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SCER,
+ .name = "scer",
+ .sid = TEGRA186_SID_SCE,
+ .regs = {
+ .sid = {
+ .override = 0x4d8,
+ .security = 0x4dc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SCEW,
+ .name = "scew",
+ .sid = TEGRA186_SID_SCE,
+ .regs = {
+ .sid = {
+ .override = 0x4e0,
+ .security = 0x4e4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SCEDMAR,
+ .name = "scedmar",
+ .sid = TEGRA186_SID_SCE,
+ .regs = {
+ .sid = {
+ .override = 0x4e8,
+ .security = 0x4ec,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_SCEDMAW,
+ .name = "scedmaw",
+ .sid = TEGRA186_SID_SCE,
+ .regs = {
+ .sid = {
+ .override = 0x4f0,
+ .security = 0x4f4,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_APEDMAR,
+ .name = "apedmar",
+ .sid = TEGRA186_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x4f8,
+ .security = 0x4fc,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_APEDMAW,
+ .name = "apedmaw",
+ .sid = TEGRA186_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x500,
+ .security = 0x504,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_NVDISPLAYR1,
+ .name = "nvdisplayr1",
+ .sid = TEGRA186_SID_NVDISPLAY,
+ .regs = {
+ .sid = {
+ .override = 0x508,
+ .security = 0x50c,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_VICSRD1,
+ .name = "vicsrd1",
+ .sid = TEGRA186_SID_VIC,
+ .regs = {
+ .sid = {
+ .override = 0x510,
+ .security = 0x514,
+ },
+ },
+ }, {
+ .id = TEGRA186_MEMORY_CLIENT_NVDECSRD1,
+ .name = "nvdecsrd1",
+ .sid = TEGRA186_SID_NVDEC,
+ .regs = {
+ .sid = {
+ .override = 0x518,
+ .security = 0x51c,
+ },
+ },
+ },
+};
+
+const struct tegra_mc_soc tegra186_mc_soc = {
+ .num_clients = ARRAY_SIZE(tegra186_mc_clients),
+ .clients = tegra186_mc_clients,
+ .num_address_bits = 40,
+ .ops = &tegra186_mc_ops,
+};
+#endif
diff --git a/drivers/memory/tegra/tegra194.c b/drivers/memory/tegra/tegra194.c
new file mode 100644
index 0000000..cab998b
--- /dev/null
+++ b/drivers/memory/tegra/tegra194.c
@@ -0,0 +1,1351 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017-2021 NVIDIA CORPORATION. All rights reserved.
+ */
+
+#include <soc/tegra/mc.h>
+
+#include <dt-bindings/memory/tegra194-mc.h>
+
+#include "mc.h"
+
+static const struct tegra_mc_client tegra194_mc_clients[] = {
+ {
+ .id = TEGRA194_MEMORY_CLIENT_PTCR,
+ .name = "ptcr",
+ .sid = TEGRA194_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x000,
+ .security = 0x004,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU7R,
+ .name = "miu7r",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x008,
+ .security = 0x00c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU7W,
+ .name = "miu7w",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x010,
+ .security = 0x014,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_HDAR,
+ .name = "hdar",
+ .sid = TEGRA194_SID_HDA,
+ .regs = {
+ .sid = {
+ .override = 0x0a8,
+ .security = 0x0ac,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_HOST1XDMAR,
+ .name = "host1xdmar",
+ .sid = TEGRA194_SID_HOST1X,
+ .regs = {
+ .sid = {
+ .override = 0x0b0,
+ .security = 0x0b4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVENCSRD,
+ .name = "nvencsrd",
+ .sid = TEGRA194_SID_NVENC,
+ .regs = {
+ .sid = {
+ .override = 0x0e0,
+ .security = 0x0e4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SATAR,
+ .name = "satar",
+ .sid = TEGRA194_SID_SATA,
+ .regs = {
+ .sid = {
+ .override = 0x0f8,
+ .security = 0x0fc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MPCORER,
+ .name = "mpcorer",
+ .sid = TEGRA194_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x138,
+ .security = 0x13c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVENCSWR,
+ .name = "nvencswr",
+ .sid = TEGRA194_SID_NVENC,
+ .regs = {
+ .sid = {
+ .override = 0x158,
+ .security = 0x15c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_HDAW,
+ .name = "hdaw",
+ .sid = TEGRA194_SID_HDA,
+ .regs = {
+ .sid = {
+ .override = 0x1a8,
+ .security = 0x1ac,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MPCOREW,
+ .name = "mpcorew",
+ .sid = TEGRA194_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x1c8,
+ .security = 0x1cc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SATAW,
+ .name = "sataw",
+ .sid = TEGRA194_SID_SATA,
+ .regs = {
+ .sid = {
+ .override = 0x1e8,
+ .security = 0x1ec,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_ISPRA,
+ .name = "ispra",
+ .sid = TEGRA194_SID_ISP,
+ .regs = {
+ .sid = {
+ .override = 0x220,
+ .security = 0x224,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_ISPFALR,
+ .name = "ispfalr",
+ .sid = TEGRA194_SID_ISP_FALCON,
+ .regs = {
+ .sid = {
+ .override = 0x228,
+ .security = 0x22c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_ISPWA,
+ .name = "ispwa",
+ .sid = TEGRA194_SID_ISP,
+ .regs = {
+ .sid = {
+ .override = 0x230,
+ .security = 0x234,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_ISPWB,
+ .name = "ispwb",
+ .sid = TEGRA194_SID_ISP,
+ .regs = {
+ .sid = {
+ .override = 0x238,
+ .security = 0x23c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_XUSB_HOSTR,
+ .name = "xusb_hostr",
+ .sid = TEGRA194_SID_XUSB_HOST,
+ .regs = {
+ .sid = {
+ .override = 0x250,
+ .security = 0x254,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_XUSB_HOSTW,
+ .name = "xusb_hostw",
+ .sid = TEGRA194_SID_XUSB_HOST,
+ .regs = {
+ .sid = {
+ .override = 0x258,
+ .security = 0x25c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_XUSB_DEVR,
+ .name = "xusb_devr",
+ .sid = TEGRA194_SID_XUSB_DEV,
+ .regs = {
+ .sid = {
+ .override = 0x260,
+ .security = 0x264,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_XUSB_DEVW,
+ .name = "xusb_devw",
+ .sid = TEGRA194_SID_XUSB_DEV,
+ .regs = {
+ .sid = {
+ .override = 0x268,
+ .security = 0x26c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SDMMCRA,
+ .name = "sdmmcra",
+ .sid = TEGRA194_SID_SDMMC1,
+ .regs = {
+ .sid = {
+ .override = 0x300,
+ .security = 0x304,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SDMMCR,
+ .name = "sdmmcr",
+ .sid = TEGRA194_SID_SDMMC3,
+ .regs = {
+ .sid = {
+ .override = 0x310,
+ .security = 0x314,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SDMMCRAB,
+ .name = "sdmmcrab",
+ .sid = TEGRA194_SID_SDMMC4,
+ .regs = {
+ .sid = {
+ .override = 0x318,
+ .security = 0x31c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SDMMCWA,
+ .name = "sdmmcwa",
+ .sid = TEGRA194_SID_SDMMC1,
+ .regs = {
+ .sid = {
+ .override = 0x320,
+ .security = 0x324,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SDMMCW,
+ .name = "sdmmcw",
+ .sid = TEGRA194_SID_SDMMC3,
+ .regs = {
+ .sid = {
+ .override = 0x330,
+ .security = 0x334,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SDMMCWAB,
+ .name = "sdmmcwab",
+ .sid = TEGRA194_SID_SDMMC4,
+ .regs = {
+ .sid = {
+ .override = 0x338,
+ .security = 0x33c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_VICSRD,
+ .name = "vicsrd",
+ .sid = TEGRA194_SID_VIC,
+ .regs = {
+ .sid = {
+ .override = 0x360,
+ .security = 0x364,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_VICSWR,
+ .name = "vicswr",
+ .sid = TEGRA194_SID_VIC,
+ .regs = {
+ .sid = {
+ .override = 0x368,
+ .security = 0x36c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_VIW,
+ .name = "viw",
+ .sid = TEGRA194_SID_VI,
+ .regs = {
+ .sid = {
+ .override = 0x390,
+ .security = 0x394,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVDECSRD,
+ .name = "nvdecsrd",
+ .sid = TEGRA194_SID_NVDEC,
+ .regs = {
+ .sid = {
+ .override = 0x3c0,
+ .security = 0x3c4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVDECSWR,
+ .name = "nvdecswr",
+ .sid = TEGRA194_SID_NVDEC,
+ .regs = {
+ .sid = {
+ .override = 0x3c8,
+ .security = 0x3cc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_APER,
+ .name = "aper",
+ .sid = TEGRA194_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x3c0,
+ .security = 0x3c4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_APEW,
+ .name = "apew",
+ .sid = TEGRA194_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x3d0,
+ .security = 0x3d4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVJPGSRD,
+ .name = "nvjpgsrd",
+ .sid = TEGRA194_SID_NVJPG,
+ .regs = {
+ .sid = {
+ .override = 0x3f0,
+ .security = 0x3f4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVJPGSWR,
+ .name = "nvjpgswr",
+ .sid = TEGRA194_SID_NVJPG,
+ .regs = {
+ .sid = {
+ .override = 0x3f0,
+ .security = 0x3f4,
+ },
+ },
+ }, {
+ .name = "axiapr",
+ .id = TEGRA194_MEMORY_CLIENT_AXIAPR,
+ .sid = TEGRA194_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x410,
+ .security = 0x414,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_AXIAPW,
+ .name = "axiapw",
+ .sid = TEGRA194_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x418,
+ .security = 0x41c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_ETRR,
+ .name = "etrr",
+ .sid = TEGRA194_SID_ETR,
+ .regs = {
+ .sid = {
+ .override = 0x420,
+ .security = 0x424,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_ETRW,
+ .name = "etrw",
+ .sid = TEGRA194_SID_ETR,
+ .regs = {
+ .sid = {
+ .override = 0x428,
+ .security = 0x42c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_AXISR,
+ .name = "axisr",
+ .sid = TEGRA194_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x460,
+ .security = 0x464,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_AXISW,
+ .name = "axisw",
+ .sid = TEGRA194_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x468,
+ .security = 0x46c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_EQOSR,
+ .name = "eqosr",
+ .sid = TEGRA194_SID_EQOS,
+ .regs = {
+ .sid = {
+ .override = 0x470,
+ .security = 0x474,
+ },
+ },
+ }, {
+ .name = "eqosw",
+ .id = TEGRA194_MEMORY_CLIENT_EQOSW,
+ .sid = TEGRA194_SID_EQOS,
+ .regs = {
+ .sid = {
+ .override = 0x478,
+ .security = 0x47c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_UFSHCR,
+ .name = "ufshcr",
+ .sid = TEGRA194_SID_UFSHC,
+ .regs = {
+ .sid = {
+ .override = 0x480,
+ .security = 0x484,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_UFSHCW,
+ .name = "ufshcw",
+ .sid = TEGRA194_SID_UFSHC,
+ .regs = {
+ .sid = {
+ .override = 0x488,
+ .security = 0x48c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVDISPLAYR,
+ .name = "nvdisplayr",
+ .sid = TEGRA194_SID_NVDISPLAY,
+ .regs = {
+ .sid = {
+ .override = 0x490,
+ .security = 0x494,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_BPMPR,
+ .name = "bpmpr",
+ .sid = TEGRA194_SID_BPMP,
+ .regs = {
+ .sid = {
+ .override = 0x498,
+ .security = 0x49c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_BPMPW,
+ .name = "bpmpw",
+ .sid = TEGRA194_SID_BPMP,
+ .regs = {
+ .sid = {
+ .override = 0x4a0,
+ .security = 0x4a4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_BPMPDMAR,
+ .name = "bpmpdmar",
+ .sid = TEGRA194_SID_BPMP,
+ .regs = {
+ .sid = {
+ .override = 0x4a8,
+ .security = 0x4ac,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_BPMPDMAW,
+ .name = "bpmpdmaw",
+ .sid = TEGRA194_SID_BPMP,
+ .regs = {
+ .sid = {
+ .override = 0x4b0,
+ .security = 0x4b4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_AONR,
+ .name = "aonr",
+ .sid = TEGRA194_SID_AON,
+ .regs = {
+ .sid = {
+ .override = 0x4b8,
+ .security = 0x4bc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_AONW,
+ .name = "aonw",
+ .sid = TEGRA194_SID_AON,
+ .regs = {
+ .sid = {
+ .override = 0x4c0,
+ .security = 0x4c4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_AONDMAR,
+ .name = "aondmar",
+ .sid = TEGRA194_SID_AON,
+ .regs = {
+ .sid = {
+ .override = 0x4c8,
+ .security = 0x4cc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_AONDMAW,
+ .name = "aondmaw",
+ .sid = TEGRA194_SID_AON,
+ .regs = {
+ .sid = {
+ .override = 0x4d0,
+ .security = 0x4d4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SCER,
+ .name = "scer",
+ .sid = TEGRA194_SID_SCE,
+ .regs = {
+ .sid = {
+ .override = 0x4d8,
+ .security = 0x4dc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SCEW,
+ .name = "scew",
+ .sid = TEGRA194_SID_SCE,
+ .regs = {
+ .sid = {
+ .override = 0x4e0,
+ .security = 0x4e4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SCEDMAR,
+ .name = "scedmar",
+ .sid = TEGRA194_SID_SCE,
+ .regs = {
+ .sid = {
+ .override = 0x4e8,
+ .security = 0x4ec,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_SCEDMAW,
+ .name = "scedmaw",
+ .sid = TEGRA194_SID_SCE,
+ .regs = {
+ .sid = {
+ .override = 0x4f0,
+ .security = 0x4f4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_APEDMAR,
+ .name = "apedmar",
+ .sid = TEGRA194_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x4f8,
+ .security = 0x4fc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_APEDMAW,
+ .name = "apedmaw",
+ .sid = TEGRA194_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x500,
+ .security = 0x504,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVDISPLAYR1,
+ .name = "nvdisplayr1",
+ .sid = TEGRA194_SID_NVDISPLAY,
+ .regs = {
+ .sid = {
+ .override = 0x508,
+ .security = 0x50c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_VICSRD1,
+ .name = "vicsrd1",
+ .sid = TEGRA194_SID_VIC,
+ .regs = {
+ .sid = {
+ .override = 0x510,
+ .security = 0x514,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVDECSRD1,
+ .name = "nvdecsrd1",
+ .sid = TEGRA194_SID_NVDEC,
+ .regs = {
+ .sid = {
+ .override = 0x518,
+ .security = 0x51c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU0R,
+ .name = "miu0r",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x530,
+ .security = 0x534,
+ },
+ },
+ }, {
+ .name = "miu0w",
+ .id = TEGRA194_MEMORY_CLIENT_MIU0W,
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x538,
+ .security = 0x53c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU1R,
+ .name = "miu1r",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x540,
+ .security = 0x544,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU1W,
+ .name = "miu1w",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x548,
+ .security = 0x54c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU2R,
+ .name = "miu2r",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x570,
+ .security = 0x574,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU2W,
+ .name = "miu2w",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x578,
+ .security = 0x57c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU3R,
+ .name = "miu3r",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x580,
+ .security = 0x584,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU3W,
+ .name = "miu3w",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x588,
+ .security = 0x58c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU4R,
+ .name = "miu4r",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x590,
+ .security = 0x594,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU4W,
+ .name = "miu4w",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x598,
+ .security = 0x59c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DPMUR,
+ .name = "dpmur",
+ .sid = TEGRA194_SID_PASSTHROUGH,
+ .regs = {
+ .sid = {
+ .override = 0x598,
+ .security = 0x59c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_VIFALR,
+ .name = "vifalr",
+ .sid = TEGRA194_SID_VI_FALCON,
+ .regs = {
+ .sid = {
+ .override = 0x5e0,
+ .security = 0x5e4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_VIFALW,
+ .name = "vifalw",
+ .sid = TEGRA194_SID_VI_FALCON,
+ .regs = {
+ .sid = {
+ .override = 0x5e8,
+ .security = 0x5ec,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA0RDA,
+ .name = "dla0rda",
+ .sid = TEGRA194_SID_NVDLA0,
+ .regs = {
+ .sid = {
+ .override = 0x5f0,
+ .security = 0x5f4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA0FALRDB,
+ .name = "dla0falrdb",
+ .sid = TEGRA194_SID_NVDLA0,
+ .regs = {
+ .sid = {
+ .override = 0x5f8,
+ .security = 0x5fc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA0WRA,
+ .name = "dla0wra",
+ .sid = TEGRA194_SID_NVDLA0,
+ .regs = {
+ .sid = {
+ .override = 0x600,
+ .security = 0x604,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA0FALWRB,
+ .name = "dla0falwrb",
+ .sid = TEGRA194_SID_NVDLA0,
+ .regs = {
+ .sid = {
+ .override = 0x608,
+ .security = 0x60c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA1RDA,
+ .name = "dla1rda",
+ .sid = TEGRA194_SID_NVDLA1,
+ .regs = {
+ .sid = {
+ .override = 0x610,
+ .security = 0x614,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA1FALRDB,
+ .name = "dla1falrdb",
+ .sid = TEGRA194_SID_NVDLA1,
+ .regs = {
+ .sid = {
+ .override = 0x618,
+ .security = 0x61c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA1WRA,
+ .name = "dla1wra",
+ .sid = TEGRA194_SID_NVDLA1,
+ .regs = {
+ .sid = {
+ .override = 0x620,
+ .security = 0x624,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA1FALWRB,
+ .name = "dla1falwrb",
+ .sid = TEGRA194_SID_NVDLA1,
+ .regs = {
+ .sid = {
+ .override = 0x628,
+ .security = 0x62c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA0RDA,
+ .name = "pva0rda",
+ .sid = TEGRA194_SID_PVA0,
+ .regs = {
+ .sid = {
+ .override = 0x630,
+ .security = 0x634,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA0RDB,
+ .name = "pva0rdb",
+ .sid = TEGRA194_SID_PVA0,
+ .regs = {
+ .sid = {
+ .override = 0x638,
+ .security = 0x63c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA0RDC,
+ .name = "pva0rdc",
+ .sid = TEGRA194_SID_PVA0,
+ .regs = {
+ .sid = {
+ .override = 0x640,
+ .security = 0x644,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA0WRA,
+ .name = "pva0wra",
+ .sid = TEGRA194_SID_PVA0,
+ .regs = {
+ .sid = {
+ .override = 0x648,
+ .security = 0x64c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA0WRB,
+ .name = "pva0wrb",
+ .sid = TEGRA194_SID_PVA0,
+ .regs = {
+ .sid = {
+ .override = 0x650,
+ .security = 0x654,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA0WRC,
+ .name = "pva0wrc",
+ .sid = TEGRA194_SID_PVA0,
+ .regs = {
+ .sid = {
+ .override = 0x658,
+ .security = 0x65c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA1RDA,
+ .name = "pva1rda",
+ .sid = TEGRA194_SID_PVA1,
+ .regs = {
+ .sid = {
+ .override = 0x660,
+ .security = 0x664,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA1RDB,
+ .name = "pva1rdb",
+ .sid = TEGRA194_SID_PVA1,
+ .regs = {
+ .sid = {
+ .override = 0x668,
+ .security = 0x66c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA1RDC,
+ .name = "pva1rdc",
+ .sid = TEGRA194_SID_PVA1,
+ .regs = {
+ .sid = {
+ .override = 0x670,
+ .security = 0x674,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA1WRA,
+ .name = "pva1wra",
+ .sid = TEGRA194_SID_PVA1,
+ .regs = {
+ .sid = {
+ .override = 0x678,
+ .security = 0x67c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA1WRB,
+ .name = "pva1wrb",
+ .sid = TEGRA194_SID_PVA1,
+ .regs = {
+ .sid = {
+ .override = 0x680,
+ .security = 0x684,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA1WRC,
+ .name = "pva1wrc",
+ .sid = TEGRA194_SID_PVA1,
+ .regs = {
+ .sid = {
+ .override = 0x688,
+ .security = 0x68c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_RCER,
+ .name = "rcer",
+ .sid = TEGRA194_SID_RCE,
+ .regs = {
+ .sid = {
+ .override = 0x690,
+ .security = 0x694,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_RCEW,
+ .name = "rcew",
+ .sid = TEGRA194_SID_RCE,
+ .regs = {
+ .sid = {
+ .override = 0x698,
+ .security = 0x69c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_RCEDMAR,
+ .name = "rcedmar",
+ .sid = TEGRA194_SID_RCE,
+ .regs = {
+ .sid = {
+ .override = 0x6a0,
+ .security = 0x6a4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_RCEDMAW,
+ .name = "rcedmaw",
+ .sid = TEGRA194_SID_RCE,
+ .regs = {
+ .sid = {
+ .override = 0x6a8,
+ .security = 0x6ac,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVENC1SRD,
+ .name = "nvenc1srd",
+ .sid = TEGRA194_SID_NVENC1,
+ .regs = {
+ .sid = {
+ .override = 0x6b0,
+ .security = 0x6b4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVENC1SWR,
+ .name = "nvenc1swr",
+ .sid = TEGRA194_SID_NVENC1,
+ .regs = {
+ .sid = {
+ .override = 0x6b8,
+ .security = 0x6bc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE0R,
+ .name = "pcie0r",
+ .sid = TEGRA194_SID_PCIE0,
+ .regs = {
+ .sid = {
+ .override = 0x6c0,
+ .security = 0x6c4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE0W,
+ .name = "pcie0w",
+ .sid = TEGRA194_SID_PCIE0,
+ .regs = {
+ .sid = {
+ .override = 0x6c8,
+ .security = 0x6cc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE1R,
+ .name = "pcie1r",
+ .sid = TEGRA194_SID_PCIE1,
+ .regs = {
+ .sid = {
+ .override = 0x6d0,
+ .security = 0x6d4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE1W,
+ .name = "pcie1w",
+ .sid = TEGRA194_SID_PCIE1,
+ .regs = {
+ .sid = {
+ .override = 0x6d8,
+ .security = 0x6dc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE2AR,
+ .name = "pcie2ar",
+ .sid = TEGRA194_SID_PCIE2,
+ .regs = {
+ .sid = {
+ .override = 0x6e0,
+ .security = 0x6e4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE2AW,
+ .name = "pcie2aw",
+ .sid = TEGRA194_SID_PCIE2,
+ .regs = {
+ .sid = {
+ .override = 0x6e8,
+ .security = 0x6ec,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE3R,
+ .name = "pcie3r",
+ .sid = TEGRA194_SID_PCIE3,
+ .regs = {
+ .sid = {
+ .override = 0x6f0,
+ .security = 0x6f4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE3W,
+ .name = "pcie3w",
+ .sid = TEGRA194_SID_PCIE3,
+ .regs = {
+ .sid = {
+ .override = 0x6f8,
+ .security = 0x6fc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE4R,
+ .name = "pcie4r",
+ .sid = TEGRA194_SID_PCIE4,
+ .regs = {
+ .sid = {
+ .override = 0x700,
+ .security = 0x704,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE4W,
+ .name = "pcie4w",
+ .sid = TEGRA194_SID_PCIE4,
+ .regs = {
+ .sid = {
+ .override = 0x708,
+ .security = 0x70c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE5R,
+ .name = "pcie5r",
+ .sid = TEGRA194_SID_PCIE5,
+ .regs = {
+ .sid = {
+ .override = 0x710,
+ .security = 0x714,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE5W,
+ .name = "pcie5w",
+ .sid = TEGRA194_SID_PCIE5,
+ .regs = {
+ .sid = {
+ .override = 0x718,
+ .security = 0x71c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_ISPFALW,
+ .name = "ispfalw",
+ .sid = TEGRA194_SID_ISP_FALCON,
+ .regs = {
+ .sid = {
+ .override = 0x720,
+ .security = 0x724,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA0RDA1,
+ .name = "dla0rda1",
+ .sid = TEGRA194_SID_NVDLA0,
+ .regs = {
+ .sid = {
+ .override = 0x748,
+ .security = 0x74c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_DLA1RDA1,
+ .name = "dla1rda1",
+ .sid = TEGRA194_SID_NVDLA1,
+ .regs = {
+ .sid = {
+ .override = 0x750,
+ .security = 0x754,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA0RDA1,
+ .name = "pva0rda1",
+ .sid = TEGRA194_SID_PVA0,
+ .regs = {
+ .sid = {
+ .override = 0x758,
+ .security = 0x75c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA0RDB1,
+ .name = "pva0rdb1",
+ .sid = TEGRA194_SID_PVA0,
+ .regs = {
+ .sid = {
+ .override = 0x760,
+ .security = 0x764,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA1RDA1,
+ .name = "pva1rda1",
+ .sid = TEGRA194_SID_PVA1,
+ .regs = {
+ .sid = {
+ .override = 0x768,
+ .security = 0x76c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PVA1RDB1,
+ .name = "pva1rdb1",
+ .sid = TEGRA194_SID_PVA1,
+ .regs = {
+ .sid = {
+ .override = 0x770,
+ .security = 0x774,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE5R1,
+ .name = "pcie5r1",
+ .sid = TEGRA194_SID_PCIE5,
+ .regs = {
+ .sid = {
+ .override = 0x778,
+ .security = 0x77c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVENCSRD1,
+ .name = "nvencsrd1",
+ .sid = TEGRA194_SID_NVENC,
+ .regs = {
+ .sid = {
+ .override = 0x780,
+ .security = 0x784,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVENC1SRD1,
+ .name = "nvenc1srd1",
+ .sid = TEGRA194_SID_NVENC1,
+ .regs = {
+ .sid = {
+ .override = 0x788,
+ .security = 0x78c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_ISPRA1,
+ .name = "ispra1",
+ .sid = TEGRA194_SID_ISP,
+ .regs = {
+ .sid = {
+ .override = 0x790,
+ .security = 0x794,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_PCIE0R1,
+ .name = "pcie0r1",
+ .sid = TEGRA194_SID_PCIE0,
+ .regs = {
+ .sid = {
+ .override = 0x798,
+ .security = 0x79c,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVDEC1SRD,
+ .name = "nvdec1srd",
+ .sid = TEGRA194_SID_NVDEC1,
+ .regs = {
+ .sid = {
+ .override = 0x7c8,
+ .security = 0x7cc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVDEC1SRD1,
+ .name = "nvdec1srd1",
+ .sid = TEGRA194_SID_NVDEC1,
+ .regs = {
+ .sid = {
+ .override = 0x7d0,
+ .security = 0x7d4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_NVDEC1SWR,
+ .name = "nvdec1swr",
+ .sid = TEGRA194_SID_NVDEC1,
+ .regs = {
+ .sid = {
+ .override = 0x7d8,
+ .security = 0x7dc,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU5R,
+ .name = "miu5r",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x7e0,
+ .security = 0x7e4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU5W,
+ .name = "miu5w",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x7e8,
+ .security = 0x7ec,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU6R,
+ .name = "miu6r",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x7f0,
+ .security = 0x7f4,
+ },
+ },
+ }, {
+ .id = TEGRA194_MEMORY_CLIENT_MIU6W,
+ .name = "miu6w",
+ .sid = TEGRA194_SID_MIU,
+ .regs = {
+ .sid = {
+ .override = 0x7f8,
+ .security = 0x7fc,
+ },
+ },
+ },
+};
+
+const struct tegra_mc_soc tegra194_mc_soc = {
+ .num_clients = ARRAY_SIZE(tegra194_mc_clients),
+ .clients = tegra194_mc_clients,
+ .num_address_bits = 40,
+ .ops = &tegra186_mc_ops,
+};
diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c
index da8a0da..c3462db 100644
--- a/drivers/memory/tegra/tegra20-emc.c
+++ b/drivers/memory/tegra/tegra20-emc.c
@@ -776,10 +776,6 @@
}
emc->debugfs.root = debugfs_create_dir("emc", NULL);
- if (!emc->debugfs.root) {
- dev_err(emc->dev, "failed to create debugfs directory\n");
- return;
- }
debugfs_create_file("available_rates", 0444, emc->debugfs.root,
emc, &tegra_emc_debug_available_rates_fops);
@@ -908,49 +904,6 @@
return err;
}
-static int tegra_emc_opp_table_init(struct tegra_emc *emc)
-{
- u32 hw_version = BIT(tegra_sku_info.soc_process_id);
- struct opp_table *hw_opp_table;
- int err;
-
- hw_opp_table = dev_pm_opp_set_supported_hw(emc->dev, &hw_version, 1);
- err = PTR_ERR_OR_ZERO(hw_opp_table);
- if (err) {
- dev_err(emc->dev, "failed to set OPP supported HW: %d\n", err);
- return err;
- }
-
- err = dev_pm_opp_of_add_table(emc->dev);
- if (err) {
- if (err == -ENODEV)
- dev_err(emc->dev, "OPP table not found, please update your device tree\n");
- else
- dev_err(emc->dev, "failed to add OPP table: %d\n", err);
-
- goto put_hw_table;
- }
-
- dev_info_once(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
- hw_version, clk_get_rate(emc->clk) / 1000000);
-
- /* first dummy rate-set initializes voltage state */
- err = dev_pm_opp_set_rate(emc->dev, clk_get_rate(emc->clk));
- if (err) {
- dev_err(emc->dev, "failed to initialize OPP clock: %d\n", err);
- goto remove_table;
- }
-
- return 0;
-
-remove_table:
- dev_pm_opp_of_remove_table(emc->dev);
-put_hw_table:
- dev_pm_opp_put_supported_hw(hw_opp_table);
-
- return err;
-}
-
static void devm_tegra_emc_unset_callback(void *data)
{
tegra20_clk_set_emc_round_callback(NULL, NULL);
@@ -1077,6 +1030,7 @@
static int tegra_emc_probe(struct platform_device *pdev)
{
+ struct tegra_core_opp_params opp_params = {};
struct device_node *np;
struct tegra_emc *emc;
int irq, err;
@@ -1122,7 +1076,9 @@
if (err)
return err;
- err = tegra_emc_opp_table_init(emc);
+ opp_params.init_state = true;
+
+ err = devm_tegra_core_dev_init_opp_table(&pdev->dev, &opp_params);
if (err)
return err;
diff --git a/drivers/memory/tegra/tegra20.c b/drivers/memory/tegra/tegra20.c
index 2db68a9..fcd7738 100644
--- a/drivers/memory/tegra/tegra20.c
+++ b/drivers/memory/tegra/tegra20.c
@@ -679,7 +679,7 @@
return 0;
}
-static int tegra20_mc_init(struct tegra_mc *mc)
+static int tegra20_mc_probe(struct tegra_mc *mc)
{
debugfs_create_devm_seqfile(mc->dev, "stats", mc->debugfs.root,
tegra20_mc_stats_show);
@@ -687,6 +687,112 @@
return 0;
}
+static int tegra20_mc_suspend(struct tegra_mc *mc)
+{
+ int err;
+
+ if (IS_ENABLED(CONFIG_TEGRA_IOMMU_GART) && mc->gart) {
+ err = tegra_gart_suspend(mc->gart);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static int tegra20_mc_resume(struct tegra_mc *mc)
+{
+ int err;
+
+ if (IS_ENABLED(CONFIG_TEGRA_IOMMU_GART) && mc->gart) {
+ err = tegra_gart_resume(mc->gart);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static irqreturn_t tegra20_mc_handle_irq(int irq, void *data)
+{
+ struct tegra_mc *mc = data;
+ unsigned long status;
+ unsigned int bit;
+
+ /* mask all interrupts to avoid flooding */
+ status = mc_readl(mc, MC_INTSTATUS) & mc->soc->intmask;
+ if (!status)
+ return IRQ_NONE;
+
+ for_each_set_bit(bit, &status, 32) {
+ const char *error = tegra_mc_status_names[bit];
+ const char *direction = "read", *secure = "";
+ const char *client, *desc;
+ phys_addr_t addr;
+ u32 value, reg;
+ u8 id, type;
+
+ switch (BIT(bit)) {
+ case MC_INT_DECERR_EMEM:
+ reg = MC_DECERR_EMEM_OTHERS_STATUS;
+ value = mc_readl(mc, reg);
+
+ id = value & mc->soc->client_id_mask;
+ desc = tegra_mc_error_names[2];
+
+ if (value & BIT(31))
+ direction = "write";
+ break;
+
+ case MC_INT_INVALID_GART_PAGE:
+ reg = MC_GART_ERROR_REQ;
+ value = mc_readl(mc, reg);
+
+ id = (value >> 1) & mc->soc->client_id_mask;
+ desc = tegra_mc_error_names[2];
+
+ if (value & BIT(0))
+ direction = "write";
+ break;
+
+ case MC_INT_SECURITY_VIOLATION:
+ reg = MC_SECURITY_VIOLATION_STATUS;
+ value = mc_readl(mc, reg);
+
+ id = value & mc->soc->client_id_mask;
+ type = (value & BIT(30)) ? 4 : 3;
+ desc = tegra_mc_error_names[type];
+ secure = "secure ";
+
+ if (value & BIT(31))
+ direction = "write";
+ break;
+
+ default:
+ continue;
+ }
+
+ client = mc->soc->clients[id].name;
+ addr = mc_readl(mc, reg + sizeof(u32));
+
+ dev_err_ratelimited(mc->dev, "%s: %s%s @%pa: %s (%s)\n",
+ client, secure, direction, &addr, error,
+ desc);
+ }
+
+ /* clear interrupts */
+ mc_writel(mc, status, MC_INTSTATUS);
+
+ return IRQ_HANDLED;
+}
+
+static const struct tegra_mc_ops tegra20_mc_ops = {
+ .probe = tegra20_mc_probe,
+ .suspend = tegra20_mc_suspend,
+ .resume = tegra20_mc_resume,
+ .handle_irq = tegra20_mc_handle_irq,
+};
+
const struct tegra_mc_soc tegra20_mc_soc = {
.clients = tegra20_mc_clients,
.num_clients = ARRAY_SIZE(tegra20_mc_clients),
@@ -698,5 +804,5 @@
.resets = tegra20_mc_resets,
.num_resets = ARRAY_SIZE(tegra20_mc_resets),
.icc_ops = &tegra20_mc_icc_ops,
- .init = tegra20_mc_init,
+ .ops = &tegra20_mc_ops,
};
diff --git a/drivers/memory/tegra/tegra210-emc-core.c b/drivers/memory/tegra/tegra210-emc-core.c
index 5f22479..06c0f17 100644
--- a/drivers/memory/tegra/tegra210-emc-core.c
+++ b/drivers/memory/tegra/tegra210-emc-core.c
@@ -1759,10 +1759,6 @@
}
emc->debugfs.root = debugfs_create_dir("emc", NULL);
- if (!emc->debugfs.root) {
- dev_err(dev, "failed to create debugfs directory\n");
- return;
- }
debugfs_create_file("available_rates", 0444, emc->debugfs.root, emc,
&tegra210_emc_debug_available_rates_fops);
diff --git a/drivers/memory/tegra/tegra210.c b/drivers/memory/tegra/tegra210.c
index b3bbc5a..8ab6498 100644
--- a/drivers/memory/tegra/tegra210.c
+++ b/drivers/memory/tegra/tegra210.c
@@ -16,1005 +16,1149 @@
.id = 0x01,
.name = "display0a",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 1,
- },
- .la = {
- .reg = 0x2e8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x02,
.name = "display0ab",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 2,
- },
- .la = {
- .reg = 0x2f4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x03,
.name = "display0b",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 3,
- },
- .la = {
- .reg = 0x2e8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x04,
.name = "display0bb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 4,
- },
- .la = {
- .reg = 0x2f4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x05,
.name = "display0c",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 5,
- },
- .la = {
- .reg = 0x2ec,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x2ec,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x06,
.name = "display0cb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 6,
- },
- .la = {
- .reg = 0x2f8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x2f8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x0e,
.name = "afir",
.swgroup = TEGRA_SWGROUP_AFI,
- .smmu = {
- .reg = 0x228,
- .bit = 14,
- },
- .la = {
- .reg = 0x2e0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x2e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x2e,
+ },
},
}, {
.id = 0x0f,
.name = "avpcarm7r",
.swgroup = TEGRA_SWGROUP_AVPC,
- .smmu = {
- .reg = 0x228,
- .bit = 15,
- },
- .la = {
- .reg = 0x2e4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x10,
.name = "displayhc",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 16,
- },
- .la = {
- .reg = 0x2f0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x11,
.name = "displayhcb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 17,
- },
- .la = {
- .reg = 0x2fc,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2fc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x15,
.name = "hdar",
.swgroup = TEGRA_SWGROUP_HDA,
- .smmu = {
- .reg = 0x228,
- .bit = 21,
- },
- .la = {
- .reg = 0x318,
- .shift = 0,
- .mask = 0xff,
- .def = 0x24,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x24,
+ },
},
}, {
.id = 0x16,
.name = "host1xdmar",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x228,
- .bit = 22,
- },
- .la = {
- .reg = 0x310,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x17,
.name = "host1xr",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x228,
- .bit = 23,
- },
- .la = {
- .reg = 0x310,
- .shift = 16,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x1c,
.name = "nvencsrd",
.swgroup = TEGRA_SWGROUP_NVENC,
- .smmu = {
- .reg = 0x228,
- .bit = 28,
- },
- .la = {
- .reg = 0x328,
- .shift = 0,
- .mask = 0xff,
- .def = 0x23,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x23,
+ },
},
}, {
.id = 0x1d,
.name = "ppcsahbdmar",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x228,
- .bit = 29,
- },
- .la = {
- .reg = 0x344,
- .shift = 0,
- .mask = 0xff,
- .def = 0x49,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
},
}, {
.id = 0x1e,
.name = "ppcsahbslvr",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x228,
- .bit = 30,
- },
- .la = {
- .reg = 0x344,
- .shift = 16,
- .mask = 0xff,
- .def = 0x1a,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
},
}, {
.id = 0x1f,
.name = "satar",
.swgroup = TEGRA_SWGROUP_SATA,
- .smmu = {
- .reg = 0x228,
- .bit = 31,
- },
- .la = {
- .reg = 0x350,
- .shift = 0,
- .mask = 0xff,
- .def = 0x65,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x65,
+ },
},
}, {
.id = 0x27,
.name = "mpcorer",
.swgroup = TEGRA_SWGROUP_MPCORE,
- .la = {
- .reg = 0x320,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .la = {
+ .reg = 0x320,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x2b,
.name = "nvencswr",
.swgroup = TEGRA_SWGROUP_NVENC,
- .smmu = {
- .reg = 0x22c,
- .bit = 11,
- },
- .la = {
- .reg = 0x328,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x31,
.name = "afiw",
.swgroup = TEGRA_SWGROUP_AFI,
- .smmu = {
- .reg = 0x22c,
- .bit = 17,
- },
- .la = {
- .reg = 0x2e0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x32,
.name = "avpcarm7w",
.swgroup = TEGRA_SWGROUP_AVPC,
- .smmu = {
- .reg = 0x22c,
- .bit = 18,
- },
- .la = {
- .reg = 0x2e4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x35,
.name = "hdaw",
.swgroup = TEGRA_SWGROUP_HDA,
- .smmu = {
- .reg = 0x22c,
- .bit = 21,
- },
- .la = {
- .reg = 0x318,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x36,
.name = "host1xw",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x22c,
- .bit = 22,
- },
- .la = {
- .reg = 0x314,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x314,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x39,
.name = "mpcorew",
.swgroup = TEGRA_SWGROUP_MPCORE,
- .la = {
- .reg = 0x320,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .la = {
+ .reg = 0x320,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x3b,
.name = "ppcsahbdmaw",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x22c,
- .bit = 27,
- },
- .la = {
- .reg = 0x348,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x3c,
.name = "ppcsahbslvw",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x22c,
- .bit = 28,
- },
- .la = {
- .reg = 0x348,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x3d,
.name = "sataw",
.swgroup = TEGRA_SWGROUP_SATA,
- .smmu = {
- .reg = 0x22c,
- .bit = 29,
- },
- .la = {
- .reg = 0x350,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x44,
.name = "ispra",
.swgroup = TEGRA_SWGROUP_ISP2,
- .smmu = {
- .reg = 0x230,
- .bit = 4,
- },
- .la = {
- .reg = 0x370,
- .shift = 0,
- .mask = 0xff,
- .def = 0x18,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x370,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x18,
+ },
},
}, {
.id = 0x46,
.name = "ispwa",
.swgroup = TEGRA_SWGROUP_ISP2,
- .smmu = {
- .reg = 0x230,
- .bit = 6,
- },
- .la = {
- .reg = 0x374,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x374,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x47,
.name = "ispwb",
.swgroup = TEGRA_SWGROUP_ISP2,
- .smmu = {
- .reg = 0x230,
- .bit = 7,
- },
- .la = {
- .reg = 0x374,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 7,
+ },
+ .la = {
+ .reg = 0x374,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x4a,
.name = "xusb_hostr",
.swgroup = TEGRA_SWGROUP_XUSB_HOST,
- .smmu = {
- .reg = 0x230,
- .bit = 10,
- },
- .la = {
- .reg = 0x37c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x7a,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x7a,
+ },
},
}, {
.id = 0x4b,
.name = "xusb_hostw",
.swgroup = TEGRA_SWGROUP_XUSB_HOST,
- .smmu = {
- .reg = 0x230,
- .bit = 11,
- },
- .la = {
- .reg = 0x37c,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x4c,
.name = "xusb_devr",
.swgroup = TEGRA_SWGROUP_XUSB_DEV,
- .smmu = {
- .reg = 0x230,
- .bit = 12,
- },
- .la = {
- .reg = 0x380,
- .shift = 0,
- .mask = 0xff,
- .def = 0x39,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x39,
+ },
},
}, {
.id = 0x4d,
.name = "xusb_devw",
.swgroup = TEGRA_SWGROUP_XUSB_DEV,
- .smmu = {
- .reg = 0x230,
- .bit = 13,
- },
- .la = {
- .reg = 0x380,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x4e,
.name = "isprab",
.swgroup = TEGRA_SWGROUP_ISP2B,
- .smmu = {
- .reg = 0x230,
- .bit = 14,
- },
- .la = {
- .reg = 0x384,
- .shift = 0,
- .mask = 0xff,
- .def = 0x18,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x384,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x18,
+ },
},
}, {
.id = 0x50,
.name = "ispwab",
.swgroup = TEGRA_SWGROUP_ISP2B,
- .smmu = {
- .reg = 0x230,
- .bit = 16,
- },
- .la = {
- .reg = 0x388,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x51,
.name = "ispwbb",
.swgroup = TEGRA_SWGROUP_ISP2B,
- .smmu = {
- .reg = 0x230,
- .bit = 17,
- },
- .la = {
- .reg = 0x388,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x54,
.name = "tsecsrd",
.swgroup = TEGRA_SWGROUP_TSEC,
- .smmu = {
- .reg = 0x230,
- .bit = 20,
- },
- .la = {
- .reg = 0x390,
- .shift = 0,
- .mask = 0xff,
- .def = 0x9b,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x9b,
+ },
},
}, {
.id = 0x55,
.name = "tsecswr",
.swgroup = TEGRA_SWGROUP_TSEC,
- .smmu = {
- .reg = 0x230,
- .bit = 21,
- },
- .la = {
- .reg = 0x390,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x56,
.name = "a9avpscr",
.swgroup = TEGRA_SWGROUP_A9AVP,
- .smmu = {
- .reg = 0x230,
- .bit = 22,
- },
- .la = {
- .reg = 0x3a4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x3a4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
}, {
.id = 0x57,
.name = "a9avpscw",
.swgroup = TEGRA_SWGROUP_A9AVP,
- .smmu = {
- .reg = 0x230,
- .bit = 23,
- },
- .la = {
- .reg = 0x3a4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x3a4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x58,
.name = "gpusrd",
.swgroup = TEGRA_SWGROUP_GPU,
- .smmu = {
- /* read-only */
- .reg = 0x230,
- .bit = 24,
- },
- .la = {
- .reg = 0x3c8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1a,
+ .regs = {
+ .smmu = {
+ /* read-only */
+ .reg = 0x230,
+ .bit = 24,
+ },
+ .la = {
+ .reg = 0x3c8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
},
}, {
.id = 0x59,
.name = "gpuswr",
.swgroup = TEGRA_SWGROUP_GPU,
- .smmu = {
- /* read-only */
- .reg = 0x230,
- .bit = 25,
- },
- .la = {
- .reg = 0x3c8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ /* read-only */
+ .reg = 0x230,
+ .bit = 25,
+ },
+ .la = {
+ .reg = 0x3c8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x5a,
.name = "displayt",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x230,
- .bit = 26,
- },
- .la = {
- .reg = 0x2f0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x1e,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 26,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
},
}, {
.id = 0x60,
.name = "sdmmcra",
.swgroup = TEGRA_SWGROUP_SDMMC1A,
- .smmu = {
- .reg = 0x234,
- .bit = 0,
- },
- .la = {
- .reg = 0x3b8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x49,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x3b8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
},
}, {
.id = 0x61,
.name = "sdmmcraa",
.swgroup = TEGRA_SWGROUP_SDMMC2A,
- .smmu = {
- .reg = 0x234,
- .bit = 1,
- },
- .la = {
- .reg = 0x3bc,
- .shift = 0,
- .mask = 0xff,
- .def = 0x5a,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x3bc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x5a,
+ },
},
}, {
.id = 0x62,
.name = "sdmmcr",
.swgroup = TEGRA_SWGROUP_SDMMC3A,
- .smmu = {
- .reg = 0x234,
- .bit = 2,
- },
- .la = {
- .reg = 0x3c0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x49,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x3c0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
},
}, {
.id = 0x63,
.swgroup = TEGRA_SWGROUP_SDMMC4A,
.name = "sdmmcrab",
- .smmu = {
- .reg = 0x234,
- .bit = 3,
- },
- .la = {
- .reg = 0x3c4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x5a,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x3c4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x5a,
+ },
},
}, {
.id = 0x64,
.name = "sdmmcwa",
.swgroup = TEGRA_SWGROUP_SDMMC1A,
- .smmu = {
- .reg = 0x234,
- .bit = 4,
- },
- .la = {
- .reg = 0x3b8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x3b8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x65,
.name = "sdmmcwaa",
.swgroup = TEGRA_SWGROUP_SDMMC2A,
- .smmu = {
- .reg = 0x234,
- .bit = 5,
- },
- .la = {
- .reg = 0x3bc,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x3bc,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x66,
.name = "sdmmcw",
.swgroup = TEGRA_SWGROUP_SDMMC3A,
- .smmu = {
- .reg = 0x234,
- .bit = 6,
- },
- .la = {
- .reg = 0x3c0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x3c0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x67,
.name = "sdmmcwab",
.swgroup = TEGRA_SWGROUP_SDMMC4A,
- .smmu = {
- .reg = 0x234,
- .bit = 7,
- },
- .la = {
- .reg = 0x3c4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 7,
+ },
+ .la = {
+ .reg = 0x3c4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x6c,
.name = "vicsrd",
.swgroup = TEGRA_SWGROUP_VIC,
- .smmu = {
- .reg = 0x234,
- .bit = 12,
- },
- .la = {
- .reg = 0x394,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1a,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x394,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
},
}, {
.id = 0x6d,
.name = "vicswr",
.swgroup = TEGRA_SWGROUP_VIC,
- .smmu = {
- .reg = 0x234,
- .bit = 13,
- },
- .la = {
- .reg = 0x394,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x394,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x72,
.name = "viw",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x234,
- .bit = 18,
- },
- .la = {
- .reg = 0x398,
- .shift = 0,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x398,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x73,
.name = "displayd",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x234,
- .bit = 19,
- },
- .la = {
- .reg = 0x3c8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x3c8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
}, {
.id = 0x78,
.name = "nvdecsrd",
.swgroup = TEGRA_SWGROUP_NVDEC,
- .smmu = {
- .reg = 0x234,
- .bit = 24,
- },
- .la = {
- .reg = 0x3d8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x23,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 24,
+ },
+ .la = {
+ .reg = 0x3d8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x23,
+ },
},
}, {
.id = 0x79,
.name = "nvdecswr",
.swgroup = TEGRA_SWGROUP_NVDEC,
- .smmu = {
- .reg = 0x234,
- .bit = 25,
- },
- .la = {
- .reg = 0x3d8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 25,
+ },
+ .la = {
+ .reg = 0x3d8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x7a,
.name = "aper",
.swgroup = TEGRA_SWGROUP_APE,
- .smmu = {
- .reg = 0x234,
- .bit = 26,
- },
- .la = {
- .reg = 0x3dc,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 26,
+ },
+ .la = {
+ .reg = 0x3dc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x7b,
.name = "apew",
.swgroup = TEGRA_SWGROUP_APE,
- .smmu = {
- .reg = 0x234,
- .bit = 27,
- },
- .la = {
- .reg = 0x3dc,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x3dc,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x7e,
.name = "nvjpgsrd",
.swgroup = TEGRA_SWGROUP_NVJPG,
- .smmu = {
- .reg = 0x234,
- .bit = 30,
- },
- .la = {
- .reg = 0x3e4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x23,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x3e4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x23,
+ },
},
}, {
.id = 0x7f,
.name = "nvjpgswr",
.swgroup = TEGRA_SWGROUP_NVJPG,
- .smmu = {
- .reg = 0x234,
- .bit = 31,
- },
- .la = {
- .reg = 0x3e4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x234,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x3e4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x80,
.name = "sesrd",
.swgroup = TEGRA_SWGROUP_SE,
- .smmu = {
- .reg = 0xb98,
- .bit = 0,
- },
- .la = {
- .reg = 0x3e0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x2e,
+ .regs = {
+ .smmu = {
+ .reg = 0xb98,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x3e0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x2e,
+ },
},
}, {
.id = 0x81,
.name = "seswr",
.swgroup = TEGRA_SWGROUP_SE,
- .smmu = {
- .reg = 0xb98,
- .bit = 1,
- },
- .la = {
- .reg = 0x3e0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0xb98,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x3e0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x82,
.name = "axiapr",
.swgroup = TEGRA_SWGROUP_AXIAP,
- .smmu = {
- .reg = 0xb98,
- .bit = 2,
- },
- .la = {
- .reg = 0x3a0,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0xb98,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x3a0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x83,
.name = "axiapw",
.swgroup = TEGRA_SWGROUP_AXIAP,
- .smmu = {
- .reg = 0xb98,
- .bit = 3,
- },
- .la = {
- .reg = 0x3a0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0xb98,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x3a0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x84,
.name = "etrr",
.swgroup = TEGRA_SWGROUP_ETR,
- .smmu = {
- .reg = 0xb98,
- .bit = 4,
- },
- .la = {
- .reg = 0x3ec,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0xb98,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x3ec,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
}, {
.id = 0x85,
.name = "etrw",
.swgroup = TEGRA_SWGROUP_ETR,
- .smmu = {
- .reg = 0xb98,
- .bit = 5,
- },
- .la = {
- .reg = 0x3ec,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0xb98,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x3ec,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x86,
.name = "tsecsrdb",
.swgroup = TEGRA_SWGROUP_TSECB,
- .smmu = {
- .reg = 0xb98,
- .bit = 6,
- },
- .la = {
- .reg = 0x3f0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x9b,
+ .regs = {
+ .smmu = {
+ .reg = 0xb98,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x3f0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x9b,
+ },
},
}, {
.id = 0x87,
.name = "tsecswrb",
.swgroup = TEGRA_SWGROUP_TSECB,
- .smmu = {
- .reg = 0xb98,
- .bit = 7,
- },
- .la = {
- .reg = 0x3f0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0xb98,
+ .bit = 7,
+ },
+ .la = {
+ .reg = 0x3f0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
}, {
.id = 0x88,
.name = "gpusrd2",
.swgroup = TEGRA_SWGROUP_GPU,
- .smmu = {
- /* read-only */
- .reg = 0xb98,
- .bit = 8,
- },
- .la = {
- .reg = 0x3e8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x1a,
+ .regs = {
+ .smmu = {
+ /* read-only */
+ .reg = 0xb98,
+ .bit = 8,
+ },
+ .la = {
+ .reg = 0x3e8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
},
}, {
.id = 0x89,
.name = "gpuswr2",
.swgroup = TEGRA_SWGROUP_GPU,
- .smmu = {
- /* read-only */
- .reg = 0xb98,
- .bit = 9,
- },
- .la = {
- .reg = 0x3e8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ /* read-only */
+ .reg = 0xb98,
+ .bit = 9,
+ },
+ .la = {
+ .reg = 0x3e8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
},
};
@@ -1142,4 +1286,5 @@
.reset_ops = &tegra_mc_reset_ops_common,
.resets = tegra210_mc_resets,
.num_resets = ARRAY_SIZE(tegra210_mc_resets),
+ .ops = &tegra30_mc_ops,
};
diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c
index 829f6d6..7e21a85 100644
--- a/drivers/memory/tegra/tegra30-emc.c
+++ b/drivers/memory/tegra/tegra30-emc.c
@@ -150,8 +150,8 @@
#define EMC_SELF_REF_CMD_ENABLED BIT(0)
#define DRAM_DEV_SEL_ALL (0 << 30)
-#define DRAM_DEV_SEL_0 (2 << 30)
-#define DRAM_DEV_SEL_1 (1 << 30)
+#define DRAM_DEV_SEL_0 BIT(31)
+#define DRAM_DEV_SEL_1 BIT(30)
#define DRAM_BROADCAST(num) \
((num) > 1 ? DRAM_DEV_SEL_ALL : DRAM_DEV_SEL_0)
@@ -1354,10 +1354,6 @@
}
emc->debugfs.root = debugfs_create_dir("emc", NULL);
- if (!emc->debugfs.root) {
- dev_err(emc->dev, "failed to create debugfs directory\n");
- return;
- }
debugfs_create_file("available_rates", 0444, emc->debugfs.root,
emc, &tegra_emc_debug_available_rates_fops);
@@ -1480,49 +1476,6 @@
return err;
}
-static int tegra_emc_opp_table_init(struct tegra_emc *emc)
-{
- u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
- struct opp_table *hw_opp_table;
- int err;
-
- hw_opp_table = dev_pm_opp_set_supported_hw(emc->dev, &hw_version, 1);
- err = PTR_ERR_OR_ZERO(hw_opp_table);
- if (err) {
- dev_err(emc->dev, "failed to set OPP supported HW: %d\n", err);
- return err;
- }
-
- err = dev_pm_opp_of_add_table(emc->dev);
- if (err) {
- if (err == -ENODEV)
- dev_err(emc->dev, "OPP table not found, please update your device tree\n");
- else
- dev_err(emc->dev, "failed to add OPP table: %d\n", err);
-
- goto put_hw_table;
- }
-
- dev_info_once(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
- hw_version, clk_get_rate(emc->clk) / 1000000);
-
- /* first dummy rate-set initializes voltage state */
- err = dev_pm_opp_set_rate(emc->dev, clk_get_rate(emc->clk));
- if (err) {
- dev_err(emc->dev, "failed to initialize OPP clock: %d\n", err);
- goto remove_table;
- }
-
- return 0;
-
-remove_table:
- dev_pm_opp_of_remove_table(emc->dev);
-put_hw_table:
- dev_pm_opp_put_supported_hw(hw_opp_table);
-
- return err;
-}
-
static void devm_tegra_emc_unset_callback(void *data)
{
tegra20_clk_set_emc_round_callback(NULL, NULL);
@@ -1568,6 +1521,7 @@
static int tegra_emc_probe(struct platform_device *pdev)
{
+ struct tegra_core_opp_params opp_params = {};
struct device_node *np;
struct tegra_emc *emc;
int err;
@@ -1617,7 +1571,9 @@
if (err)
return err;
- err = tegra_emc_opp_table_init(emc);
+ opp_params.init_state = true;
+
+ err = devm_tegra_core_dev_init_opp_table(&pdev->dev, &opp_params);
if (err)
return err;
diff --git a/drivers/memory/tegra/tegra30.c b/drivers/memory/tegra/tegra30.c
index ea84900..8431635 100644
--- a/drivers/memory/tegra/tegra30.c
+++ b/drivers/memory/tegra/tegra30.c
@@ -37,970 +37,1102 @@
.id = 0x00,
.name = "ptcr",
.swgroup = TEGRA_SWGROUP_PTC,
- .la = {
- .reg = 0x34c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0,
+ .regs = {
+ .la = {
+ .reg = 0x34c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0,
+ },
},
.fifo_size = 16 * 2,
}, {
.id = 0x01,
.name = "display0a",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 1,
- },
- .la = {
- .reg = 0x2e8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
.fifo_size = 16 * 128,
}, {
.id = 0x02,
.name = "display0ab",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 2,
- },
- .la = {
- .reg = 0x2f4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
.fifo_size = 16 * 128,
}, {
.id = 0x03,
.name = "display0b",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 3,
- },
- .la = {
- .reg = 0x2e8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x04,
.name = "display0bb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 4,
- },
- .la = {
- .reg = 0x2f4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x05,
.name = "display0c",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 5,
- },
- .la = {
- .reg = 0x2ec,
- .shift = 0,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x2ec,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
.fifo_size = 16 * 128,
}, {
.id = 0x06,
.name = "display0cb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 6,
- },
- .la = {
- .reg = 0x2f8,
- .shift = 0,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x2f8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
.fifo_size = 16 * 128,
}, {
.id = 0x07,
.name = "display1b",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 7,
- },
- .la = {
- .reg = 0x2ec,
- .shift = 16,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 7,
+ },
+ .la = {
+ .reg = 0x2ec,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x08,
.name = "display1bb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 8,
- },
- .la = {
- .reg = 0x2f8,
- .shift = 16,
- .mask = 0xff,
- .def = 0x4e,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 8,
+ },
+ .la = {
+ .reg = 0x2f8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x09,
.name = "eppup",
.swgroup = TEGRA_SWGROUP_EPP,
- .smmu = {
- .reg = 0x228,
- .bit = 9,
- },
- .la = {
- .reg = 0x300,
- .shift = 0,
- .mask = 0xff,
- .def = 0x17,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 9,
+ },
+ .la = {
+ .reg = 0x300,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x17,
+ },
},
.fifo_size = 16 * 8,
}, {
.id = 0x0a,
.name = "g2pr",
.swgroup = TEGRA_SWGROUP_G2,
- .smmu = {
- .reg = 0x228,
- .bit = 10,
- },
- .la = {
- .reg = 0x308,
- .shift = 0,
- .mask = 0xff,
- .def = 0x09,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x308,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x09,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x0b,
.name = "g2sr",
.swgroup = TEGRA_SWGROUP_G2,
- .smmu = {
- .reg = 0x228,
- .bit = 11,
- },
- .la = {
- .reg = 0x308,
- .shift = 16,
- .mask = 0xff,
- .def = 0x09,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x308,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x09,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x0c,
.name = "mpeunifbr",
.swgroup = TEGRA_SWGROUP_MPE,
- .smmu = {
- .reg = 0x228,
- .bit = 12,
- },
- .la = {
- .reg = 0x328,
- .shift = 0,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
.fifo_size = 16 * 8,
}, {
.id = 0x0d,
.name = "viruv",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x228,
- .bit = 13,
- },
- .la = {
- .reg = 0x364,
- .shift = 0,
- .mask = 0xff,
- .def = 0x2c,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x364,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x2c,
+ },
},
.fifo_size = 16 * 8,
}, {
.id = 0x0e,
.name = "afir",
.swgroup = TEGRA_SWGROUP_AFI,
- .smmu = {
- .reg = 0x228,
- .bit = 14,
- },
- .la = {
- .reg = 0x2e0,
- .shift = 0,
- .mask = 0xff,
- .def = 0x10,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
},
.fifo_size = 16 * 32,
}, {
.id = 0x0f,
.name = "avpcarm7r",
.swgroup = TEGRA_SWGROUP_AVPC,
- .smmu = {
- .reg = 0x228,
- .bit = 15,
- },
- .la = {
- .reg = 0x2e4,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
.fifo_size = 16 * 2,
}, {
.id = 0x10,
.name = "displayhc",
.swgroup = TEGRA_SWGROUP_DC,
- .smmu = {
- .reg = 0x228,
- .bit = 16,
- },
- .la = {
- .reg = 0x2f0,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 2,
}, {
.id = 0x11,
.name = "displayhcb",
.swgroup = TEGRA_SWGROUP_DCB,
- .smmu = {
- .reg = 0x228,
- .bit = 17,
- },
- .la = {
- .reg = 0x2fc,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2fc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 2,
}, {
.id = 0x12,
.name = "fdcdrd",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x228,
- .bit = 18,
- },
- .la = {
- .reg = 0x334,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0a,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x334,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
},
.fifo_size = 16 * 48,
}, {
.id = 0x13,
.name = "fdcdrd2",
.swgroup = TEGRA_SWGROUP_NV2,
- .smmu = {
- .reg = 0x228,
- .bit = 19,
- },
- .la = {
- .reg = 0x33c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0a,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x33c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
},
.fifo_size = 16 * 48,
}, {
.id = 0x14,
.name = "g2dr",
.swgroup = TEGRA_SWGROUP_G2,
- .smmu = {
- .reg = 0x228,
- .bit = 20,
- },
- .la = {
- .reg = 0x30c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x0a,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x30c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
},
.fifo_size = 16 * 48,
}, {
.id = 0x15,
.name = "hdar",
.swgroup = TEGRA_SWGROUP_HDA,
- .smmu = {
- .reg = 0x228,
- .bit = 21,
- },
- .la = {
- .reg = 0x318,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 16,
}, {
.id = 0x16,
.name = "host1xdmar",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x228,
- .bit = 22,
- },
- .la = {
- .reg = 0x310,
- .shift = 0,
- .mask = 0xff,
- .def = 0x05,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x05,
+ },
},
.fifo_size = 16 * 16,
}, {
.id = 0x17,
.name = "host1xr",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x228,
- .bit = 23,
- },
- .la = {
- .reg = 0x310,
- .shift = 16,
- .mask = 0xff,
- .def = 0x50,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
},
.fifo_size = 16 * 8,
}, {
.id = 0x18,
.name = "idxsrd",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x228,
- .bit = 24,
- },
- .la = {
- .reg = 0x334,
- .shift = 16,
- .mask = 0xff,
- .def = 0x13,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 24,
+ },
+ .la = {
+ .reg = 0x334,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x13,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x19,
.name = "idxsrd2",
.swgroup = TEGRA_SWGROUP_NV2,
- .smmu = {
- .reg = 0x228,
- .bit = 25,
- },
- .la = {
- .reg = 0x33c,
- .shift = 16,
- .mask = 0xff,
- .def = 0x13,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 25,
+ },
+ .la = {
+ .reg = 0x33c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x13,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x1a,
.name = "mpe_ipred",
.swgroup = TEGRA_SWGROUP_MPE,
- .smmu = {
- .reg = 0x228,
- .bit = 26,
- },
- .la = {
- .reg = 0x328,
- .shift = 16,
- .mask = 0xff,
- .def = 0x80,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 26,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
},
.fifo_size = 16 * 2,
}, {
.id = 0x1b,
.name = "mpeamemrd",
.swgroup = TEGRA_SWGROUP_MPE,
- .smmu = {
- .reg = 0x228,
- .bit = 27,
- },
- .la = {
- .reg = 0x32c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x42,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x32c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x42,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x1c,
.name = "mpecsrd",
.swgroup = TEGRA_SWGROUP_MPE,
- .smmu = {
- .reg = 0x228,
- .bit = 28,
- },
- .la = {
- .reg = 0x32c,
- .shift = 16,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x32c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 8,
}, {
.id = 0x1d,
.name = "ppcsahbdmar",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x228,
- .bit = 29,
- },
- .la = {
- .reg = 0x344,
- .shift = 0,
- .mask = 0xff,
- .def = 0x10,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
},
.fifo_size = 16 * 2,
}, {
.id = 0x1e,
.name = "ppcsahbslvr",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x228,
- .bit = 30,
- },
- .la = {
- .reg = 0x344,
- .shift = 16,
- .mask = 0xff,
- .def = 0x12,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x12,
+ },
},
.fifo_size = 16 * 8,
}, {
.id = 0x1f,
.name = "satar",
.swgroup = TEGRA_SWGROUP_SATA,
- .smmu = {
- .reg = 0x228,
- .bit = 31,
- },
- .la = {
- .reg = 0x350,
- .shift = 0,
- .mask = 0xff,
- .def = 0x33,
+ .regs = {
+ .smmu = {
+ .reg = 0x228,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x33,
+ },
},
.fifo_size = 16 * 32,
}, {
.id = 0x20,
.name = "texsrd",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x22c,
- .bit = 0,
- },
- .la = {
- .reg = 0x338,
- .shift = 0,
- .mask = 0xff,
- .def = 0x13,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x338,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x13,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x21,
.name = "texsrd2",
.swgroup = TEGRA_SWGROUP_NV2,
- .smmu = {
- .reg = 0x22c,
- .bit = 1,
- },
- .la = {
- .reg = 0x340,
- .shift = 0,
- .mask = 0xff,
- .def = 0x13,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x340,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x13,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x22,
.name = "vdebsevr",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 2,
- },
- .la = {
- .reg = 0x354,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 8,
}, {
.id = 0x23,
.name = "vdember",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 3,
- },
- .la = {
- .reg = 0x354,
- .shift = 16,
- .mask = 0xff,
- .def = 0xd0,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xd0,
+ },
},
.fifo_size = 16 * 4,
}, {
.id = 0x24,
.name = "vdemcer",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 4,
- },
- .la = {
- .reg = 0x358,
- .shift = 0,
- .mask = 0xff,
- .def = 0x2a,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x2a,
+ },
},
.fifo_size = 16 * 16,
}, {
.id = 0x25,
.name = "vdetper",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 5,
- },
- .la = {
- .reg = 0x358,
- .shift = 16,
- .mask = 0xff,
- .def = 0x74,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x74,
+ },
},
.fifo_size = 16 * 16,
}, {
.id = 0x26,
.name = "mpcorelpr",
.swgroup = TEGRA_SWGROUP_MPCORELP,
- .la = {
- .reg = 0x324,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .la = {
+ .reg = 0x324,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
.fifo_size = 16 * 14,
}, {
.id = 0x27,
.name = "mpcorer",
.swgroup = TEGRA_SWGROUP_MPCORE,
- .la = {
- .reg = 0x320,
- .shift = 0,
- .mask = 0xff,
- .def = 0x04,
+ .regs = {
+ .la = {
+ .reg = 0x320,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
},
.fifo_size = 16 * 14,
}, {
.id = 0x28,
.name = "eppu",
.swgroup = TEGRA_SWGROUP_EPP,
- .smmu = {
- .reg = 0x22c,
- .bit = 8,
- },
- .la = {
- .reg = 0x300,
- .shift = 16,
- .mask = 0xff,
- .def = 0x6c,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 8,
+ },
+ .la = {
+ .reg = 0x300,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x29,
.name = "eppv",
.swgroup = TEGRA_SWGROUP_EPP,
- .smmu = {
- .reg = 0x22c,
- .bit = 9,
- },
- .la = {
- .reg = 0x304,
- .shift = 0,
- .mask = 0xff,
- .def = 0x6c,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 9,
+ },
+ .la = {
+ .reg = 0x304,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x2a,
.name = "eppy",
.swgroup = TEGRA_SWGROUP_EPP,
- .smmu = {
- .reg = 0x22c,
- .bit = 10,
- },
- .la = {
- .reg = 0x304,
- .shift = 16,
- .mask = 0xff,
- .def = 0x6c,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x304,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x2b,
.name = "mpeunifbw",
.swgroup = TEGRA_SWGROUP_MPE,
- .smmu = {
- .reg = 0x22c,
- .bit = 11,
- },
- .la = {
- .reg = 0x330,
- .shift = 0,
- .mask = 0xff,
- .def = 0x13,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x330,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x13,
+ },
},
.fifo_size = 16 * 8,
}, {
.id = 0x2c,
.name = "viwsb",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x22c,
- .bit = 12,
- },
- .la = {
- .reg = 0x364,
- .shift = 16,
- .mask = 0xff,
- .def = 0x12,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x364,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x12,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x2d,
.name = "viwu",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x22c,
- .bit = 13,
- },
- .la = {
- .reg = 0x368,
- .shift = 0,
- .mask = 0xff,
- .def = 0xb2,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x368,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xb2,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x2e,
.name = "viwv",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x22c,
- .bit = 14,
- },
- .la = {
- .reg = 0x368,
- .shift = 16,
- .mask = 0xff,
- .def = 0xb2,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x368,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xb2,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x2f,
.name = "viwy",
.swgroup = TEGRA_SWGROUP_VI,
- .smmu = {
- .reg = 0x22c,
- .bit = 15,
- },
- .la = {
- .reg = 0x36c,
- .shift = 0,
- .mask = 0xff,
- .def = 0x12,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x36c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x12,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x30,
.name = "g2dw",
.swgroup = TEGRA_SWGROUP_G2,
- .smmu = {
- .reg = 0x22c,
- .bit = 16,
- },
- .la = {
- .reg = 0x30c,
- .shift = 16,
- .mask = 0xff,
- .def = 0x9,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x30c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x9,
+ },
},
.fifo_size = 16 * 128,
}, {
.id = 0x31,
.name = "afiw",
.swgroup = TEGRA_SWGROUP_AFI,
- .smmu = {
- .reg = 0x22c,
- .bit = 17,
- },
- .la = {
- .reg = 0x2e0,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0c,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
},
.fifo_size = 16 * 32,
}, {
.id = 0x32,
.name = "avpcarm7w",
.swgroup = TEGRA_SWGROUP_AVPC,
- .smmu = {
- .reg = 0x22c,
- .bit = 18,
- },
- .la = {
- .reg = 0x2e4,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0e,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
},
.fifo_size = 16 * 2,
}, {
.id = 0x33,
.name = "fdcdwr",
.swgroup = TEGRA_SWGROUP_NV,
- .smmu = {
- .reg = 0x22c,
- .bit = 19,
- },
- .la = {
- .reg = 0x338,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0a,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x338,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
},
.fifo_size = 16 * 48,
}, {
.id = 0x34,
.name = "fdcdwr2",
.swgroup = TEGRA_SWGROUP_NV2,
- .smmu = {
- .reg = 0x22c,
- .bit = 20,
- },
- .la = {
- .reg = 0x340,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0a,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x340,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
},
.fifo_size = 16 * 48,
}, {
.id = 0x35,
.name = "hdaw",
.swgroup = TEGRA_SWGROUP_HDA,
- .smmu = {
- .reg = 0x22c,
- .bit = 21,
- },
- .la = {
- .reg = 0x318,
- .shift = 16,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 16,
}, {
.id = 0x36,
.name = "host1xw",
.swgroup = TEGRA_SWGROUP_HC,
- .smmu = {
- .reg = 0x22c,
- .bit = 22,
- },
- .la = {
- .reg = 0x314,
- .shift = 0,
- .mask = 0xff,
- .def = 0x10,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x314,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
},
.fifo_size = 16 * 32,
}, {
.id = 0x37,
.name = "ispw",
.swgroup = TEGRA_SWGROUP_ISP,
- .smmu = {
- .reg = 0x22c,
- .bit = 23,
- },
- .la = {
- .reg = 0x31c,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x31c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 64,
}, {
.id = 0x38,
.name = "mpcorelpw",
.swgroup = TEGRA_SWGROUP_MPCORELP,
- .la = {
- .reg = 0x324,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0e,
+ .regs = {
+ .la = {
+ .reg = 0x324,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
},
.fifo_size = 16 * 24,
}, {
.id = 0x39,
.name = "mpcorew",
.swgroup = TEGRA_SWGROUP_MPCORE,
- .la = {
- .reg = 0x320,
- .shift = 16,
- .mask = 0xff,
- .def = 0x0e,
+ .regs = {
+ .la = {
+ .reg = 0x320,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
},
.fifo_size = 16 * 24,
}, {
.id = 0x3a,
.name = "mpecswr",
.swgroup = TEGRA_SWGROUP_MPE,
- .smmu = {
- .reg = 0x22c,
- .bit = 26,
- },
- .la = {
- .reg = 0x330,
- .shift = 16,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 26,
+ },
+ .la = {
+ .reg = 0x330,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 8,
}, {
.id = 0x3b,
.name = "ppcsahbdmaw",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x22c,
- .bit = 27,
- },
- .la = {
- .reg = 0x348,
- .shift = 0,
- .mask = 0xff,
- .def = 0x10,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
},
.fifo_size = 16 * 2,
}, {
.id = 0x3c,
.name = "ppcsahbslvw",
.swgroup = TEGRA_SWGROUP_PPCS,
- .smmu = {
- .reg = 0x22c,
- .bit = 28,
- },
- .la = {
- .reg = 0x348,
- .shift = 16,
- .mask = 0xff,
- .def = 0x06,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x06,
+ },
},
.fifo_size = 16 * 4,
}, {
.id = 0x3d,
.name = "sataw",
.swgroup = TEGRA_SWGROUP_SATA,
- .smmu = {
- .reg = 0x22c,
- .bit = 29,
- },
- .la = {
- .reg = 0x350,
- .shift = 16,
- .mask = 0xff,
- .def = 0x33,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x33,
+ },
},
.fifo_size = 16 * 32,
}, {
.id = 0x3e,
.name = "vdebsevw",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 30,
- },
- .la = {
- .reg = 0x35c,
- .shift = 0,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 4,
}, {
.id = 0x3f,
.name = "vdedbgw",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x22c,
- .bit = 31,
- },
- .la = {
- .reg = 0x35c,
- .shift = 16,
- .mask = 0xff,
- .def = 0xff,
+ .regs = {
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
},
.fifo_size = 16 * 16,
}, {
.id = 0x40,
.name = "vdembew",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x230,
- .bit = 0,
- },
- .la = {
- .reg = 0x360,
- .shift = 0,
- .mask = 0xff,
- .def = 0x42,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x42,
+ },
},
.fifo_size = 16 * 2,
}, {
.id = 0x41,
.name = "vdetpmw",
.swgroup = TEGRA_SWGROUP_VDE,
- .smmu = {
- .reg = 0x230,
- .bit = 1,
- },
- .la = {
- .reg = 0x360,
- .shift = 16,
- .mask = 0xff,
- .def = 0x2a,
+ .regs = {
+ .smmu = {
+ .reg = 0x230,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x2a,
+ },
},
.fifo_size = 16 * 16,
},
@@ -1089,7 +1221,6 @@
unsigned int bandwidth_mbytes_sec)
{
u32 arb_tolerance_compensation_nsec, arb_tolerance_compensation_div;
- const struct tegra_mc_la *la = &client->la;
unsigned int fifo_size = client->fifo_size;
u32 arb_nsec, la_ticks, value;
@@ -1149,12 +1280,12 @@
* request.
*/
la_ticks = arb_nsec / mc->tick;
- la_ticks = min(la_ticks, la->mask);
+ la_ticks = min(la_ticks, client->regs.la.mask);
- value = mc_readl(mc, la->reg);
- value &= ~(la->mask << la->shift);
- value |= la_ticks << la->shift;
- mc_writel(mc, value, la->reg);
+ value = mc_readl(mc, client->regs.la.reg);
+ value &= ~(client->regs.la.mask << client->regs.la.shift);
+ value |= la_ticks << client->regs.la.shift;
+ mc_writel(mc, value, client->regs.la.reg);
}
static int tegra30_mc_icc_set(struct icc_node *src, struct icc_node *dst)
@@ -1268,4 +1399,5 @@
.resets = tegra30_mc_resets,
.num_resets = ARRAY_SIZE(tegra30_mc_resets),
.icc_ops = &tegra30_mc_icc_ops,
+ .ops = &tegra30_mc_ops,
};
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 85c66af..7ae754e 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -37,6 +37,8 @@
#include <linux/module.h>
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
+#include <mach/hardware.h>
+#include <linux/soc/ixp4xx/cpu.h>
#include "ixp46x_ts.h"
diff --git a/drivers/net/ethernet/xscale/ptp_ixp46x.c b/drivers/net/ethernet/xscale/ptp_ixp46x.c
index 9ecc395..99d4d94 100644
--- a/drivers/net/ethernet/xscale/ptp_ixp46x.c
+++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c
@@ -12,9 +12,8 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/kernel.h>
-#include <linux/module.h>
-
#include <linux/ptp_clock_kernel.h>
+#include <linux/soc/ixp4xx/cpu.h>
#include "ixp46x_ts.h"
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index e975211..3c51ab2 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -22,6 +22,7 @@
#include <linux/slab.h>
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
+#include <linux/soc/ixp4xx/cpu.h>
#define DEBUG_DESC 0
#define DEBUG_RX 0
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 2f2c8a1..5e1e379 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -37,6 +37,14 @@
depends on OF
default ARCH_GEMINI
+config PCI_IXP4XX
+ bool "Intel IXP4xx PCI controller"
+ depends on ARM && OF
+ default ARCH_IXP4XX
+ help
+ Say Y here if you want support for the PCI host controller found
+ in the Intel IXP4xx XScale-based network processor SoC.
+
config PCI_TEGRA
bool "NVIDIA Tegra PCIe controller"
depends on ARCH_TEGRA || COMPILE_TEST
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index 63e3880..aaf30b3 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PCIE_CADENCE) += cadence/
obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
+obj-$(CONFIG_PCI_IXP4XX) += pci-ixp4xx.o
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
obj-$(CONFIG_PCI_HYPERV_INTERFACE) += pci-hyperv-intf.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
diff --git a/drivers/pci/controller/pci-ixp4xx.c b/drivers/pci/controller/pci-ixp4xx.c
new file mode 100644
index 0000000..896a45b
--- /dev/null
+++ b/drivers/pci/controller/pci-ixp4xx.c
@@ -0,0 +1,671 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for Intel IXP4xx PCI host controller
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the IXP4xx arch/arm/mach-ixp4xx/common-pci.c driver
+ * Copyright (C) 2002 Intel Corporation
+ * Copyright (C) 2003 Greg Ungerer <gerg@linux-m68k.org>
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2005 Deepak Saxena <dsaxena@plexity.net>
+ * Copyright (C) 2005 Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * TODO:
+ * - Test IO-space access
+ * - DMA support
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/bits.h>
+
+/* Register offsets */
+#define IXP4XX_PCI_NP_AD 0x00
+#define IXP4XX_PCI_NP_CBE 0x04
+#define IXP4XX_PCI_NP_WDATA 0x08
+#define IXP4XX_PCI_NP_RDATA 0x0c
+#define IXP4XX_PCI_CRP_AD_CBE 0x10
+#define IXP4XX_PCI_CRP_WDATA 0x14
+#define IXP4XX_PCI_CRP_RDATA 0x18
+#define IXP4XX_PCI_CSR 0x1c
+#define IXP4XX_PCI_ISR 0x20
+#define IXP4XX_PCI_INTEN 0x24
+#define IXP4XX_PCI_DMACTRL 0x28
+#define IXP4XX_PCI_AHBMEMBASE 0x2c
+#define IXP4XX_PCI_AHBIOBASE 0x30
+#define IXP4XX_PCI_PCIMEMBASE 0x34
+#define IXP4XX_PCI_AHBDOORBELL 0x38
+#define IXP4XX_PCI_PCIDOORBELL 0x3c
+#define IXP4XX_PCI_ATPDMA0_AHBADDR 0x40
+#define IXP4XX_PCI_ATPDMA0_PCIADDR 0x44
+#define IXP4XX_PCI_ATPDMA0_LENADDR 0x48
+#define IXP4XX_PCI_ATPDMA1_AHBADDR 0x4c
+#define IXP4XX_PCI_ATPDMA1_PCIADDR 0x50
+#define IXP4XX_PCI_ATPDMA1_LENADDR 0x54
+
+/* CSR bit definitions */
+#define IXP4XX_PCI_CSR_HOST BIT(0)
+#define IXP4XX_PCI_CSR_ARBEN BIT(1)
+#define IXP4XX_PCI_CSR_ADS BIT(2)
+#define IXP4XX_PCI_CSR_PDS BIT(3)
+#define IXP4XX_PCI_CSR_ABE BIT(4)
+#define IXP4XX_PCI_CSR_DBT BIT(5)
+#define IXP4XX_PCI_CSR_ASE BIT(8)
+#define IXP4XX_PCI_CSR_IC BIT(15)
+#define IXP4XX_PCI_CSR_PRST BIT(16)
+
+/* ISR (Interrupt status) Register bit definitions */
+#define IXP4XX_PCI_ISR_PSE BIT(0)
+#define IXP4XX_PCI_ISR_PFE BIT(1)
+#define IXP4XX_PCI_ISR_PPE BIT(2)
+#define IXP4XX_PCI_ISR_AHBE BIT(3)
+#define IXP4XX_PCI_ISR_APDC BIT(4)
+#define IXP4XX_PCI_ISR_PADC BIT(5)
+#define IXP4XX_PCI_ISR_ADB BIT(6)
+#define IXP4XX_PCI_ISR_PDB BIT(7)
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define IXP4XX_PCI_INTEN_PSE BIT(0)
+#define IXP4XX_PCI_INTEN_PFE BIT(1)
+#define IXP4XX_PCI_INTEN_PPE BIT(2)
+#define IXP4XX_PCI_INTEN_AHBE BIT(3)
+#define IXP4XX_PCI_INTEN_APDC BIT(4)
+#define IXP4XX_PCI_INTEN_PADC BIT(5)
+#define IXP4XX_PCI_INTEN_ADB BIT(6)
+#define IXP4XX_PCI_INTEN_PDB BIT(7)
+
+/* Shift value for byte enable on NP cmd/byte enable register */
+#define IXP4XX_PCI_NP_CBE_BESL 4
+
+/* PCI commands supported by NP access unit */
+#define NP_CMD_IOREAD 0x2
+#define NP_CMD_IOWRITE 0x3
+#define NP_CMD_CONFIGREAD 0xa
+#define NP_CMD_CONFIGWRITE 0xb
+#define NP_CMD_MEMREAD 0x6
+#define NP_CMD_MEMWRITE 0x7
+
+/* Constants for CRP access into local config space */
+#define CRP_AD_CBE_BESL 20
+#define CRP_AD_CBE_WRITE 0x00010000
+
+/* Special PCI configuration space registers for this controller */
+#define IXP4XX_PCI_RTOTTO 0x40
+
+struct ixp4xx_pci {
+ struct device *dev;
+ void __iomem *base;
+ bool errata_hammer;
+ bool host_mode;
+};
+
+/*
+ * The IXP4xx has a peculiar address bus that will change the
+ * byte order on SoC peripherals depending on whether the device
+ * operates in big-endian or little-endian mode. That means that
+ * readl() and writel() that always use little-endian access
+ * will not work for SoC peripherals such as the PCI controller
+ * when used in big-endian mode. The accesses to the individual
+ * PCI devices on the other hand, are always little-endian and
+ * can use readl() and writel().
+ *
+ * For local AHB bus access we need to use __raw_[readl|writel]()
+ * to make sure that we access the SoC devices in the CPU native
+ * endianness.
+ */
+static inline u32 ixp4xx_readl(struct ixp4xx_pci *p, u32 reg)
+{
+ return __raw_readl(p->base + reg);
+}
+
+static inline void ixp4xx_writel(struct ixp4xx_pci *p, u32 reg, u32 val)
+{
+ __raw_writel(val, p->base + reg);
+}
+
+static int ixp4xx_pci_check_master_abort(struct ixp4xx_pci *p)
+{
+ u32 isr = ixp4xx_readl(p, IXP4XX_PCI_ISR);
+
+ if (isr & IXP4XX_PCI_ISR_PFE) {
+ /* Make sure the master abort bit is reset */
+ ixp4xx_writel(p, IXP4XX_PCI_ISR, IXP4XX_PCI_ISR_PFE);
+ dev_dbg(p->dev, "master abort detected\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ixp4xx_pci_read(struct ixp4xx_pci *p, u32 addr, u32 cmd, u32 *data)
+{
+ ixp4xx_writel(p, IXP4XX_PCI_NP_AD, addr);
+
+ if (p->errata_hammer) {
+ int i;
+
+ /*
+ * PCI workaround - only works if NP PCI space reads have
+ * no side effects. Hammer the register and read twice 8
+ * times. last one will be good.
+ */
+ for (i = 0; i < 8; i++) {
+ ixp4xx_writel(p, IXP4XX_PCI_NP_CBE, cmd);
+ *data = ixp4xx_readl(p, IXP4XX_PCI_NP_RDATA);
+ *data = ixp4xx_readl(p, IXP4XX_PCI_NP_RDATA);
+ }
+ } else {
+ ixp4xx_writel(p, IXP4XX_PCI_NP_CBE, cmd);
+ *data = ixp4xx_readl(p, IXP4XX_PCI_NP_RDATA);
+ }
+
+ return ixp4xx_pci_check_master_abort(p);
+}
+
+static int ixp4xx_pci_write(struct ixp4xx_pci *p, u32 addr, u32 cmd, u32 data)
+{
+ ixp4xx_writel(p, IXP4XX_PCI_NP_AD, addr);
+
+ /* Set up the write */
+ ixp4xx_writel(p, IXP4XX_PCI_NP_CBE, cmd);
+
+ /* Execute the write by writing to NP_WDATA */
+ ixp4xx_writel(p, IXP4XX_PCI_NP_WDATA, data);
+
+ return ixp4xx_pci_check_master_abort(p);
+}
+
+static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
+{
+ /* Root bus is always 0 in this hardware */
+ if (bus_num == 0) {
+ /* type 0 */
+ return BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) |
+ (where & ~3);
+ } else {
+ /* type 1 */
+ return (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) |
+ ((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
+ }
+}
+
+/*
+ * CRP functions are "Controller Configuration Port" accesses
+ * initiated from within this driver itself to read/write PCI
+ * control information in the config space.
+ */
+static u32 ixp4xx_crp_byte_lane_enable_bits(u32 n, int size)
+{
+ if (size == 1)
+ return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL;
+ if (size == 2)
+ return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL;
+ if (size == 4)
+ return 0;
+ return 0xffffffff;
+}
+
+static int ixp4xx_crp_read_config(struct ixp4xx_pci *p, int where, int size,
+ u32 *value)
+{
+ u32 n, cmd, val;
+
+ n = where % 4;
+ cmd = where & ~3;
+
+ dev_dbg(p->dev, "%s from %d size %d cmd %08x\n",
+ __func__, where, size, cmd);
+
+ ixp4xx_writel(p, IXP4XX_PCI_CRP_AD_CBE, cmd);
+ val = ixp4xx_readl(p, IXP4XX_PCI_CRP_RDATA);
+
+ val >>= (8*n);
+ switch (size) {
+ case 1:
+ val &= U8_MAX;
+ dev_dbg(p->dev, "%s read byte %02x\n", __func__, val);
+ break;
+ case 2:
+ val &= U16_MAX;
+ dev_dbg(p->dev, "%s read word %04x\n", __func__, val);
+ break;
+ case 4:
+ val &= U32_MAX;
+ dev_dbg(p->dev, "%s read long %08x\n", __func__, val);
+ break;
+ default:
+ /* Should not happen */
+ dev_err(p->dev, "%s illegal size\n", __func__);
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ *value = val;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ixp4xx_crp_write_config(struct ixp4xx_pci *p, int where, int size,
+ u32 value)
+{
+ u32 n, cmd, val;
+
+ n = where % 4;
+ cmd = ixp4xx_crp_byte_lane_enable_bits(n, size);
+ if (cmd == 0xffffffff)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ cmd |= where & ~3;
+ cmd |= CRP_AD_CBE_WRITE;
+
+ val = value << (8*n);
+
+ dev_dbg(p->dev, "%s to %d size %d cmd %08x val %08x\n",
+ __func__, where, size, cmd, val);
+
+ ixp4xx_writel(p, IXP4XX_PCI_CRP_AD_CBE, cmd);
+ ixp4xx_writel(p, IXP4XX_PCI_CRP_WDATA, val);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * Then follows the functions that read and write from the common PCI
+ * configuration space.
+ */
+static u32 ixp4xx_byte_lane_enable_bits(u32 n, int size)
+{
+ if (size == 1)
+ return (0xf & ~BIT(n)) << 4;
+ if (size == 2)
+ return (0xf & ~(BIT(n) | BIT(n+1))) << 4;
+ if (size == 4)
+ return 0;
+ return 0xffffffff;
+}
+
+static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ struct ixp4xx_pci *p = bus->sysdata;
+ u32 n, addr, val, cmd;
+ u8 bus_num = bus->number;
+ int ret;
+
+ *value = 0xffffffff;
+ n = where % 4;
+ cmd = ixp4xx_byte_lane_enable_bits(n, size);
+ if (cmd == 0xffffffff)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ addr = ixp4xx_config_addr(bus_num, devfn, where);
+ cmd |= NP_CMD_CONFIGREAD;
+ dev_dbg(p->dev, "read_config from %d size %d dev %d:%d:%d address: %08x cmd: %08x\n",
+ where, size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), addr, cmd);
+
+ ret = ixp4xx_pci_read(p, addr, cmd, &val);
+ if (ret)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ val >>= (8*n);
+ switch (size) {
+ case 1:
+ val &= U8_MAX;
+ dev_dbg(p->dev, "%s read byte %02x\n", __func__, val);
+ break;
+ case 2:
+ val &= U16_MAX;
+ dev_dbg(p->dev, "%s read word %04x\n", __func__, val);
+ break;
+ case 4:
+ val &= U32_MAX;
+ dev_dbg(p->dev, "%s read long %08x\n", __func__, val);
+ break;
+ default:
+ /* Should not happen */
+ dev_err(p->dev, "%s illegal size\n", __func__);
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ *value = val;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ixp4xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ struct ixp4xx_pci *p = bus->sysdata;
+ u32 n, addr, val, cmd;
+ u8 bus_num = bus->number;
+ int ret;
+
+ n = where % 4;
+ cmd = ixp4xx_byte_lane_enable_bits(n, size);
+ if (cmd == 0xffffffff)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ addr = ixp4xx_config_addr(bus_num, devfn, where);
+ cmd |= NP_CMD_CONFIGWRITE;
+ val = value << (8*n);
+
+ dev_dbg(p->dev, "write_config_byte %#x to %d size %d dev %d:%d:%d addr: %08x cmd %08x\n",
+ value, where, size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), addr, cmd);
+
+ ret = ixp4xx_pci_write(p, addr, cmd, val);
+ if (ret)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops ixp4xx_pci_ops = {
+ .read = ixp4xx_pci_read_config,
+ .write = ixp4xx_pci_write_config,
+};
+
+static u32 ixp4xx_pci_addr_to_64mconf(phys_addr_t addr)
+{
+ u8 base;
+
+ base = ((addr & 0xff000000) >> 24);
+ return (base << 24) | ((base + 1) << 16)
+ | ((base + 2) << 8) | (base + 3);
+}
+
+static int ixp4xx_pci_parse_map_ranges(struct ixp4xx_pci *p)
+{
+ struct device *dev = p->dev;
+ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(p);
+ struct resource_entry *win;
+ struct resource *res;
+ phys_addr_t addr;
+
+ win = resource_list_first_type(&bridge->windows, IORESOURCE_MEM);
+ if (win) {
+ u32 pcimembase;
+
+ res = win->res;
+ addr = res->start - win->offset;
+
+ if (res->flags & IORESOURCE_PREFETCH)
+ res->name = "IXP4xx PCI PRE-MEM";
+ else
+ res->name = "IXP4xx PCI NON-PRE-MEM";
+
+ dev_dbg(dev, "%s window %pR, bus addr %pa\n",
+ res->name, res, &addr);
+ if (resource_size(res) != SZ_64M) {
+ dev_err(dev, "memory range is not 64MB\n");
+ return -EINVAL;
+ }
+
+ pcimembase = ixp4xx_pci_addr_to_64mconf(addr);
+ /* Commit configuration */
+ ixp4xx_writel(p, IXP4XX_PCI_PCIMEMBASE, pcimembase);
+ } else {
+ dev_err(dev, "no AHB memory mapping defined\n");
+ }
+
+ win = resource_list_first_type(&bridge->windows, IORESOURCE_IO);
+ if (win) {
+ res = win->res;
+
+ addr = pci_pio_to_address(res->start);
+ if (addr & 0xff) {
+ dev_err(dev, "IO mem at uneven address: %pa\n", &addr);
+ return -EINVAL;
+ }
+
+ res->name = "IXP4xx PCI IO MEM";
+ /*
+ * Setup I/O space location for PCI->AHB access, the
+ * upper 24 bits of the address goes into the lower
+ * 24 bits of this register.
+ */
+ ixp4xx_writel(p, IXP4XX_PCI_AHBIOBASE, (addr >> 8));
+ } else {
+ dev_info(dev, "no IO space AHB memory mapping defined\n");
+ }
+
+ return 0;
+}
+
+static int ixp4xx_pci_parse_map_dma_ranges(struct ixp4xx_pci *p)
+{
+ struct device *dev = p->dev;
+ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(p);
+ struct resource_entry *win;
+ struct resource *res;
+ phys_addr_t addr;
+ u32 ahbmembase;
+
+ win = resource_list_first_type(&bridge->dma_ranges, IORESOURCE_MEM);
+ if (win) {
+ res = win->res;
+ addr = res->start - win->offset;
+
+ if (resource_size(res) != SZ_64M) {
+ dev_err(dev, "DMA memory range is not 64MB\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "DMA MEM BASE: %pa\n", &addr);
+ /*
+ * 4 PCI-to-AHB windows of 16 MB each, write the 8 high bits
+ * into each byte of the PCI_AHBMEMBASE register.
+ */
+ ahbmembase = ixp4xx_pci_addr_to_64mconf(addr);
+ /* Commit AHB membase */
+ ixp4xx_writel(p, IXP4XX_PCI_AHBMEMBASE, ahbmembase);
+ } else {
+ dev_err(dev, "no DMA memory range defined\n");
+ }
+
+ return 0;
+}
+
+/* Only used to get context for abort handling */
+static struct ixp4xx_pci *ixp4xx_pci_abort_singleton;
+
+static int ixp4xx_pci_abort_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ struct ixp4xx_pci *p = ixp4xx_pci_abort_singleton;
+ u32 isr, status;
+ int ret;
+
+ isr = ixp4xx_readl(p, IXP4XX_PCI_ISR);
+ ret = ixp4xx_crp_read_config(p, PCI_STATUS, 2, &status);
+ if (ret) {
+ dev_err(p->dev, "unable to read abort status\n");
+ return -EINVAL;
+ }
+
+ dev_err(p->dev,
+ "PCI: abort_handler addr = %#lx, isr = %#x, status = %#x\n",
+ addr, isr, status);
+
+ /* Make sure the Master Abort bit is reset */
+ ixp4xx_writel(p, IXP4XX_PCI_ISR, IXP4XX_PCI_ISR_PFE);
+ status |= PCI_STATUS_REC_MASTER_ABORT;
+ ret = ixp4xx_crp_write_config(p, PCI_STATUS, 2, status);
+ if (ret)
+ dev_err(p->dev, "unable to clear abort status bit\n");
+
+ /*
+ * If it was an imprecise abort, then we need to correct the
+ * return address to be _after_ the instruction.
+ */
+ if (fsr & (1 << 10)) {
+ dev_err(p->dev, "imprecise abort\n");
+ regs->ARM_pc += 4;
+ }
+
+ return 0;
+}
+
+static int __init ixp4xx_pci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct ixp4xx_pci *p;
+ struct pci_host_bridge *host;
+ int ret;
+ u32 val;
+ phys_addr_t addr;
+ u32 basereg[4] = {
+ PCI_BASE_ADDRESS_0,
+ PCI_BASE_ADDRESS_1,
+ PCI_BASE_ADDRESS_2,
+ PCI_BASE_ADDRESS_3,
+ };
+ int i;
+
+ host = devm_pci_alloc_host_bridge(dev, sizeof(*p));
+ if (!host)
+ return -ENOMEM;
+
+ host->ops = &ixp4xx_pci_ops;
+ p = pci_host_bridge_priv(host);
+ host->sysdata = p;
+ p->dev = dev;
+ dev_set_drvdata(dev, p);
+
+ /*
+ * Set up quirk for erratic behaviour in the 42x variant
+ * when accessing config space.
+ */
+ if (of_device_is_compatible(np, "intel,ixp42x-pci")) {
+ p->errata_hammer = true;
+ dev_info(dev, "activate hammering errata\n");
+ }
+
+ p->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(p->base))
+ return PTR_ERR(p->base);
+
+ val = ixp4xx_readl(p, IXP4XX_PCI_CSR);
+ p->host_mode = !!(val & IXP4XX_PCI_CSR_HOST);
+ dev_info(dev, "controller is in %s mode\n",
+ p->host_mode ? "host" : "option");
+
+ /* Hook in our fault handler for PCI errors */
+ ixp4xx_pci_abort_singleton = p;
+ hook_fault_code(16+6, ixp4xx_pci_abort_handler, SIGBUS, 0,
+ "imprecise external abort");
+
+ ret = ixp4xx_pci_parse_map_ranges(p);
+ if (ret)
+ return ret;
+
+ ret = ixp4xx_pci_parse_map_dma_ranges(p);
+ if (ret)
+ return ret;
+
+ /* This is only configured in host mode */
+ if (p->host_mode) {
+ addr = __pa(PAGE_OFFSET);
+ /* This is a noop (0x00) but explains what is going on */
+ addr |= PCI_BASE_ADDRESS_SPACE_MEMORY;
+
+ for (i = 0; i < 4; i++) {
+ /* Write this directly into the config space */
+ ret = ixp4xx_crp_write_config(p, basereg[i], 4, addr);
+ if (ret)
+ dev_err(dev, "failed to set up PCI_BASE_ADDRESS_%d\n", i);
+ else
+ dev_info(dev, "set PCI_BASE_ADDR_%d to %pa\n", i, &addr);
+ addr += SZ_16M;
+ }
+
+ /*
+ * Enable CSR window at 64 MiB to allow PCI masters to continue
+ * prefetching past the 64 MiB boundary, if all AHB to PCI
+ * windows are consecutive.
+ */
+ ret = ixp4xx_crp_write_config(p, PCI_BASE_ADDRESS_4, 4, addr);
+ if (ret)
+ dev_err(dev, "failed to set up PCI_BASE_ADDRESS_4\n");
+ else
+ dev_info(dev, "set PCI_BASE_ADDR_4 to %pa\n", &addr);
+
+ /*
+ * Put the IO memory window at the very end of physical memory
+ * at 0xfffffc00. This is when the system is trying to access IO
+ * memory over AHB.
+ */
+ addr = 0xfffffc00;
+ addr |= PCI_BASE_ADDRESS_SPACE_IO;
+ ret = ixp4xx_crp_write_config(p, PCI_BASE_ADDRESS_5, 4, addr);
+ if (ret)
+ dev_err(dev, "failed to set up PCI_BASE_ADDRESS_5\n");
+ else
+ dev_info(dev, "set PCI_BASE_ADDR_5 to %pa\n", &addr);
+
+ /*
+ * Retry timeout to 0x80
+ * Transfer ready timeout to 0xff
+ */
+ ret = ixp4xx_crp_write_config(p, IXP4XX_PCI_RTOTTO, 4,
+ 0x000080ff);
+ if (ret)
+ dev_err(dev, "failed to set up TRDY limit\n");
+ else
+ dev_info(dev, "set TRDY limit to 0x80ff\n");
+ }
+
+ /* Clear interrupts */
+ val = IXP4XX_PCI_ISR_PSE | IXP4XX_PCI_ISR_PFE | IXP4XX_PCI_ISR_PPE | IXP4XX_PCI_ISR_AHBE;
+ ixp4xx_writel(p, IXP4XX_PCI_ISR, val);
+
+ /*
+ * Set Initialize Complete in PCI Control Register: allow IXP4XX to
+ * generate PCI configuration cycles. Specify that the AHB bus is
+ * operating in big-endian mode. Set up byte lane swapping between
+ * little-endian PCI and the big-endian AHB bus.
+ */
+ val = IXP4XX_PCI_CSR_IC | IXP4XX_PCI_CSR_ABE;
+ if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ val |= (IXP4XX_PCI_CSR_PDS | IXP4XX_PCI_CSR_ADS);
+ ixp4xx_writel(p, IXP4XX_PCI_CSR, val);
+
+ ret = ixp4xx_crp_write_config(p, PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ if (ret)
+ dev_err(dev, "unable to initialize master and command memory\n");
+ else
+ dev_info(dev, "initialized as master\n");
+
+ pci_host_probe(host);
+
+ return 0;
+}
+
+static const struct of_device_id ixp4xx_pci_of_match[] = {
+ {
+ .compatible = "intel,ixp42x-pci",
+ },
+ {
+ .compatible = "intel,ixp43x-pci",
+ },
+ {},
+};
+
+/*
+ * This driver needs to be a builtin module with suppressed bind
+ * attributes since the probe() is initializing a hard exception
+ * handler and this can only be done from __init-tagged code
+ * sections. This module cannot be removed and inserted at all.
+ */
+static struct platform_driver ixp4xx_pci_driver = {
+ .driver = {
+ .name = "ixp4xx-pci",
+ .suppress_bind_attrs = true,
+ .of_match_table = ixp4xx_pci_of_match,
+ },
+};
+builtin_platform_driver_probe(ixp4xx_pci_driver, ixp4xx_pci_probe);
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 29fb33c..328f70f 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -43,8 +43,9 @@
This enables the reset controller driver for BCM6345 SoCs.
config RESET_BERLIN
- bool "Berlin Reset Driver" if COMPILE_TEST
- default ARCH_BERLIN
+ tristate "Berlin Reset Driver"
+ depends on ARCH_BERLIN || COMPILE_TEST
+ default m if ARCH_BERLIN
help
This enables the reset controller driver for Marvell Berlin SoCs.
@@ -59,7 +60,8 @@
config RESET_BRCMSTB_RESCAL
bool "Broadcom STB RESCAL reset controller"
depends on HAS_IOMEM
- default ARCH_BRCMSTB || COMPILE_TEST
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ default ARCH_BRCMSTB
help
This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
BCM7216.
@@ -82,6 +84,7 @@
config RESET_INTEL_GW
bool "Intel Reset Controller Driver"
+ depends on X86 || COMPILE_TEST
depends on OF && HAS_IOMEM
select REGMAP_MMIO
help
@@ -111,6 +114,14 @@
help
This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
+config RESET_MCHP_SPARX5
+ bool "Microchip Sparx5 reset driver"
+ depends on HAS_IOMEM || COMPILE_TEST
+ default y if SPARX5_SWITCH
+ select MFD_SYSCON
+ help
+ This driver supports switch core reset for the Microchip Sparx5 SoC.
+
config RESET_MESON
tristate "Meson Reset Driver"
depends on ARCH_MESON || COMPILE_TEST
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index ac3e612..ea8b8d9 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -16,6 +16,7 @@
obj-$(CONFIG_RESET_K210) += reset-k210.o
obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
+obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
obj-$(CONFIG_RESET_NPCM) += reset-npcm.o
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 71c1c82..61e6888 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -84,7 +84,7 @@
* without gaps.
*/
static int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
- const struct of_phandle_args *reset_spec)
+ const struct of_phandle_args *reset_spec)
{
if (reset_spec->args[0] >= rcdev->nr_resets)
return -EINVAL;
@@ -744,9 +744,9 @@
}
EXPORT_SYMBOL_GPL(reset_control_bulk_release);
-static struct reset_control *__reset_control_get_internal(
- struct reset_controller_dev *rcdev,
- unsigned int index, bool shared, bool acquired)
+static struct reset_control *
+__reset_control_get_internal(struct reset_controller_dev *rcdev,
+ unsigned int index, bool shared, bool acquired)
{
struct reset_control *rstc;
@@ -774,7 +774,10 @@
if (!rstc)
return ERR_PTR(-ENOMEM);
- try_module_get(rcdev->owner);
+ if (!try_module_get(rcdev->owner)) {
+ kfree(rstc);
+ return ERR_PTR(-ENODEV);
+ }
rstc->rcdev = rcdev;
list_add(&rstc->list, &rcdev->reset_control_head);
@@ -806,9 +809,9 @@
kref_put(&rstc->refcnt, __reset_control_release);
}
-struct reset_control *__of_reset_control_get(struct device_node *node,
- const char *id, int index, bool shared,
- bool optional, bool acquired)
+struct reset_control *
+__of_reset_control_get(struct device_node *node, const char *id, int index,
+ bool shared, bool optional, bool acquired)
{
struct reset_control *rstc;
struct reset_controller_dev *r, *rcdev;
@@ -1027,9 +1030,9 @@
reset_control_put(*(struct reset_control **)res);
}
-struct reset_control *__devm_reset_control_get(struct device *dev,
- const char *id, int index, bool shared,
- bool optional, bool acquired)
+struct reset_control *
+__devm_reset_control_get(struct device *dev, const char *id, int index,
+ bool shared, bool optional, bool acquired)
{
struct reset_control **ptr, *rstc;
diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c
index 1992650..5ca145b 100644
--- a/drivers/reset/hisilicon/hi6220_reset.c
+++ b/drivers/reset/hisilicon/hi6220_reset.c
@@ -3,7 +3,7 @@
* Hisilicon Hi6220 reset controller driver
*
* Copyright (c) 2016 Linaro Limited.
- * Copyright (c) 2015-2016 Hisilicon Limited.
+ * Copyright (c) 2015-2016 HiSilicon Limited.
*
* Author: Feng Chen <puck.chen@hisilicon.com>
*/
diff --git a/drivers/reset/reset-a10sr.c b/drivers/reset/reset-a10sr.c
index 7eacc89..99b3bc8 100644
--- a/drivers/reset/reset-a10sr.c
+++ b/drivers/reset/reset-a10sr.c
@@ -118,6 +118,7 @@
.probe = a10sr_reset_probe,
.driver = {
.name = "altr_a10sr_reset",
+ .of_match_table = a10sr_reset_of_match,
},
};
module_platform_driver(a10sr_reset_driver);
diff --git a/drivers/reset/reset-bcm6345.c b/drivers/reset/reset-bcm6345.c
index 737e4e8..ac6c7ad 100644
--- a/drivers/reset/reset-bcm6345.c
+++ b/drivers/reset/reset-bcm6345.c
@@ -86,7 +86,7 @@
return !(__raw_readl(bcm6345_reset->base) & BIT(id));
}
-static struct reset_control_ops bcm6345_reset_ops = {
+static const struct reset_control_ops bcm6345_reset_ops = {
.assert = bcm6345_reset_assert,
.deassert = bcm6345_reset_deassert,
.reset = bcm6345_reset_reset,
diff --git a/drivers/reset/reset-berlin.c b/drivers/reset/reset-berlin.c
index 371197b..2537ec0 100644
--- a/drivers/reset/reset-berlin.c
+++ b/drivers/reset/reset-berlin.c
@@ -14,7 +14,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
-#include <linux/init.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
@@ -55,7 +55,7 @@
static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
- unsigned offset, bit;
+ unsigned int offset, bit;
offset = reset_spec->args[0];
bit = reset_spec->args[1];
@@ -93,6 +93,7 @@
{ .compatible = "marvell,berlin2-reset" },
{ },
};
+MODULE_DEVICE_TABLE(of, berlin_reset_dt_match);
static struct platform_driver berlin_reset_driver = {
.probe = berlin2_reset_probe,
@@ -101,4 +102,9 @@
.of_match_table = berlin_reset_dt_match,
},
};
-builtin_platform_driver(berlin_reset_driver);
+module_platform_driver(berlin_reset_driver);
+
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Synaptics Berlin reset controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/reset-brcmstb.c b/drivers/reset/reset-brcmstb.c
index f213264..42c9d52 100644
--- a/drivers/reset/reset-brcmstb.c
+++ b/drivers/reset/reset-brcmstb.c
@@ -111,6 +111,7 @@
{ .compatible = "brcm,brcmstb-reset" },
{ /* sentinel */ }
};
+MODULE_DEVICE_TABLE(of, brcmstb_reset_of_match);
static struct platform_driver brcmstb_reset_driver = {
.probe = brcmstb_reset_probe,
diff --git a/drivers/reset/reset-lantiq.c b/drivers/reset/reset-lantiq.c
index ac41d09..b936cfe 100644
--- a/drivers/reset/reset-lantiq.c
+++ b/drivers/reset/reset-lantiq.c
@@ -186,7 +186,7 @@
priv->rcdev.of_xlate = lantiq_rcu_reset_xlate;
priv->rcdev.of_reset_n_cells = 2;
- return reset_controller_register(&priv->rcdev);
+ return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
}
static const struct of_device_id lantiq_rcu_reset_dt_ids[] = {
diff --git a/drivers/reset/reset-microchip-sparx5.c b/drivers/reset/reset-microchip-sparx5.c
new file mode 100644
index 0000000..f01e7db
--- /dev/null
+++ b/drivers/reset/reset-microchip-sparx5.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Microchip Sparx5 Switch Reset driver
+ *
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ *
+ * The Sparx5 Chip Register Model can be browsed at this location:
+ * https://github.com/microchip-ung/sparx-5_reginfo
+ */
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#define PROTECT_REG 0x84
+#define PROTECT_BIT BIT(10)
+#define SOFT_RESET_REG 0x00
+#define SOFT_RESET_BIT BIT(1)
+
+struct mchp_reset_context {
+ struct regmap *cpu_ctrl;
+ struct regmap *gcb_ctrl;
+ struct reset_controller_dev rcdev;
+};
+
+static struct regmap_config sparx5_reset_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int sparx5_switch_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mchp_reset_context *ctx =
+ container_of(rcdev, struct mchp_reset_context, rcdev);
+ u32 val;
+
+ /* Make sure the core is PROTECTED from reset */
+ regmap_update_bits(ctx->cpu_ctrl, PROTECT_REG, PROTECT_BIT, PROTECT_BIT);
+
+ /* Start soft reset */
+ regmap_write(ctx->gcb_ctrl, SOFT_RESET_REG, SOFT_RESET_BIT);
+
+ /* Wait for soft reset done */
+ return regmap_read_poll_timeout(ctx->gcb_ctrl, SOFT_RESET_REG, val,
+ (val & SOFT_RESET_BIT) == 0,
+ 1, 100);
+}
+
+static const struct reset_control_ops sparx5_reset_ops = {
+ .reset = sparx5_switch_reset,
+};
+
+static int mchp_sparx5_map_syscon(struct platform_device *pdev, char *name,
+ struct regmap **target)
+{
+ struct device_node *syscon_np;
+ struct regmap *regmap;
+ int err;
+
+ syscon_np = of_parse_phandle(pdev->dev.of_node, name, 0);
+ if (!syscon_np)
+ return -ENODEV;
+ regmap = syscon_node_to_regmap(syscon_np);
+ of_node_put(syscon_np);
+ if (IS_ERR(regmap)) {
+ err = PTR_ERR(regmap);
+ dev_err(&pdev->dev, "No '%s' map: %d\n", name, err);
+ return err;
+ }
+ *target = regmap;
+ return 0;
+}
+
+static int mchp_sparx5_map_io(struct platform_device *pdev, int index,
+ struct regmap **target)
+{
+ struct resource *res;
+ struct regmap *map;
+ void __iomem *mem;
+
+ mem = devm_platform_get_and_ioremap_resource(pdev, index, &res);
+ if (IS_ERR(mem)) {
+ dev_err(&pdev->dev, "Could not map resource %d\n", index);
+ return PTR_ERR(mem);
+ }
+ sparx5_reset_regmap_config.name = res->name;
+ map = devm_regmap_init_mmio(&pdev->dev, mem, &sparx5_reset_regmap_config);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+ *target = map;
+ return 0;
+}
+
+static int mchp_sparx5_reset_probe(struct platform_device *pdev)
+{
+ struct device_node *dn = pdev->dev.of_node;
+ struct mchp_reset_context *ctx;
+ int err;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ err = mchp_sparx5_map_syscon(pdev, "cpu-syscon", &ctx->cpu_ctrl);
+ if (err)
+ return err;
+ err = mchp_sparx5_map_io(pdev, 0, &ctx->gcb_ctrl);
+ if (err)
+ return err;
+
+ ctx->rcdev.owner = THIS_MODULE;
+ ctx->rcdev.nr_resets = 1;
+ ctx->rcdev.ops = &sparx5_reset_ops;
+ ctx->rcdev.of_node = dn;
+
+ return devm_reset_controller_register(&pdev->dev, &ctx->rcdev);
+}
+
+static const struct of_device_id mchp_sparx5_reset_of_match[] = {
+ {
+ .compatible = "microchip,sparx5-switch-reset",
+ },
+ { }
+};
+
+static struct platform_driver mchp_sparx5_reset_driver = {
+ .probe = mchp_sparx5_reset_probe,
+ .driver = {
+ .name = "sparx5-switch-reset",
+ .of_match_table = mchp_sparx5_reset_of_match,
+ },
+};
+
+static int __init mchp_sparx5_reset_init(void)
+{
+ return platform_driver_register(&mchp_sparx5_reset_driver);
+}
+
+postcore_initcall(mchp_sparx5_reset_init);
+
+MODULE_DESCRIPTION("Microchip Sparx5 switch reset driver");
+MODULE_AUTHOR("Steen Hegelund <steen.hegelund@microchip.com>");
+MODULE_LICENSE("Dual MIT/GPL");
diff --git a/drivers/reset/reset-oxnas.c b/drivers/reset/reset-oxnas.c
index c4013165..8209f92 100644
--- a/drivers/reset/reset-oxnas.c
+++ b/drivers/reset/reset-oxnas.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * drivers/reset/reset-oxnas.c
+ * Oxford Semiconductor Reset Controller driver
*
* Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
* Copyright (C) 2014 Ma Haijun <mahaijuns@gmail.com>
diff --git a/drivers/reset/reset-ti-syscon.c b/drivers/reset/reset-ti-syscon.c
index 218370f..2b92775 100644
--- a/drivers/reset/reset-ti-syscon.c
+++ b/drivers/reset/reset-ti-syscon.c
@@ -58,8 +58,8 @@
unsigned int nr_controls;
};
-#define to_ti_syscon_reset_data(rcdev) \
- container_of(rcdev, struct ti_syscon_reset_data, rcdev)
+#define to_ti_syscon_reset_data(_rcdev) \
+ container_of(_rcdev, struct ti_syscon_reset_data, rcdev)
/**
* ti_syscon_reset_assert() - assert device reset
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 279e535..5f75783 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -20,7 +20,7 @@
#define UNIPHIER_RESET_ACTIVE_LOW BIT(0)
};
-#define UNIPHIER_RESET_ID_END (unsigned int)(-1)
+#define UNIPHIER_RESET_ID_END ((unsigned int)(-1))
#define UNIPHIER_RESET_END \
{ .id = UNIPHIER_RESET_ID_END }
diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
index ebd433f..daa425e 100644
--- a/drivers/reset/reset-zynqmp.c
+++ b/drivers/reset/reset-zynqmp.c
@@ -83,8 +83,8 @@
};
static const struct zynqmp_reset_soc_data versal_reset_data = {
- .reset_id = 0,
- .num_resets = VERSAL_NR_RESETS,
+ .reset_id = 0,
+ .num_resets = VERSAL_NR_RESETS,
};
static const struct reset_control_ops zynqmp_reset_ops = {
diff --git a/drivers/reset/sti/reset-syscfg.c b/drivers/reset/sti/reset-syscfg.c
index 99b6303..b4b46e0 100644
--- a/drivers/reset/sti/reset-syscfg.c
+++ b/drivers/reset/sti/reset-syscfg.c
@@ -153,7 +153,7 @@
if (!rc->channels)
return -ENOMEM;
- rc->rst.ops = &syscfg_reset_ops,
+ rc->rst.ops = &syscfg_reset_ops;
rc->rst.of_node = dev->of_node;
rc->rst.nr_resets = data->nr_channels;
rc->active_low = data->active_low;
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index d256018..8d3a1d8 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -61,6 +61,9 @@
module_param_named(aqmask, aqm_str, charp, 0440);
MODULE_PARM_DESC(aqmask, "AP bus domain mask.");
+atomic_t ap_max_msg_size = ATOMIC_INIT(AP_DEFAULT_MAX_MSG_SIZE);
+EXPORT_SYMBOL(ap_max_msg_size);
+
static struct device *ap_root_device;
/* Hashtable of all queue devices on the AP bus */
@@ -316,11 +319,24 @@
* Returns true if TAPQ succeeded and the info is filled or
* false otherwise.
*/
-static bool ap_queue_info(ap_qid_t qid, int *q_type,
- unsigned int *q_fac, int *q_depth, bool *q_decfg)
+static bool ap_queue_info(ap_qid_t qid, int *q_type, unsigned int *q_fac,
+ int *q_depth, int *q_ml, bool *q_decfg)
{
struct ap_queue_status status;
- unsigned long info = 0;
+ union {
+ unsigned long value;
+ struct {
+ unsigned int fac : 32; /* facility bits */
+ unsigned int at : 8; /* ap type */
+ unsigned int _res1 : 8;
+ unsigned int _res2 : 4;
+ unsigned int ml : 4; /* apxl ml */
+ unsigned int _res3 : 4;
+ unsigned int qd : 4; /* queue depth */
+ } tapq_gr2;
+ } tapq_info;
+
+ tapq_info.value = 0;
/* make sure we don't run into a specifiation exception */
if (AP_QID_CARD(qid) > ap_max_adapter_id ||
@@ -328,7 +344,7 @@
return false;
/* call TAPQ on this APQN */
- status = ap_test_queue(qid, ap_apft_available(), &info);
+ status = ap_test_queue(qid, ap_apft_available(), &tapq_info.value);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
case AP_RESPONSE_RESET_IN_PROGRESS:
@@ -340,11 +356,12 @@
* info should be filled. All bits 0 is not possible as
* there is at least one of the mode bits set.
*/
- if (WARN_ON_ONCE(!info))
+ if (WARN_ON_ONCE(!tapq_info.value))
return false;
- *q_type = (int)((info >> 24) & 0xff);
- *q_fac = (unsigned int)(info >> 32);
- *q_depth = (int)(info & 0xff);
+ *q_type = tapq_info.tapq_gr2.at;
+ *q_fac = tapq_info.tapq_gr2.fac;
+ *q_depth = tapq_info.tapq_gr2.qd;
+ *q_ml = tapq_info.tapq_gr2.ml;
*q_decfg = status.response_code == AP_RESPONSE_DECONFIGURED;
switch (*q_type) {
/* For CEX2 and CEX3 the available functions
@@ -1516,7 +1533,7 @@
unsigned int func;
struct device *dev;
struct ap_queue *aq;
- int rc, dom, depth, type;
+ int rc, dom, depth, type, ml;
/*
* Go through the configuration for the domains and compare them
@@ -1540,7 +1557,7 @@
continue;
}
/* domain is valid, get info from this APQN */
- if (!ap_queue_info(qid, &type, &func, &depth, &decfg)) {
+ if (!ap_queue_info(qid, &type, &func, &depth, &ml, &decfg)) {
if (aq) {
AP_DBF_INFO(
"%s(%d,%d) ap_queue_info() not successful, rm queue device\n",
@@ -1639,7 +1656,7 @@
unsigned int func;
struct device *dev;
struct ap_card *ac;
- int rc, dom, depth, type, comp_type;
+ int rc, dom, depth, type, comp_type, ml;
/* Is there currently a card device for this adapter ? */
dev = bus_find_device(&ap_bus_type, NULL,
@@ -1668,7 +1685,8 @@
for (dom = 0; dom <= ap_max_domain_id; dom++)
if (ap_test_config_usage_domain(dom)) {
qid = AP_MKQID(ap, dom);
- if (ap_queue_info(qid, &type, &func, &depth, &decfg))
+ if (ap_queue_info(qid, &type, &func,
+ &depth, &ml, &decfg))
break;
}
if (dom > ap_max_domain_id) {
@@ -1737,7 +1755,7 @@
__func__, ap, type);
return;
}
- ac = ap_card_create(ap, depth, type, comp_type, func);
+ ac = ap_card_create(ap, depth, type, comp_type, func, ml);
if (!ac) {
AP_DBF_WARN("%s(%d) ap_card_create() failed\n",
__func__, ap);
@@ -1748,6 +1766,12 @@
dev->bus = &ap_bus_type;
dev->parent = ap_root_device;
dev_set_name(dev, "card%02x", ap);
+ /* maybe enlarge ap_max_msg_size to support this card */
+ if (ac->maxmsgsize > atomic_read(&ap_max_msg_size)) {
+ atomic_set(&ap_max_msg_size, ac->maxmsgsize);
+ AP_DBF_INFO("%s(%d) ap_max_msg_size update to %d byte\n",
+ __func__, ap, atomic_read(&ap_max_msg_size));
+ }
/* Register the new card device with AP bus */
rc = device_register(dev);
if (rc) {
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index 230fec6..8f18abd 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -25,8 +25,11 @@
#define AP_RESET_TIMEOUT (HZ*0.7) /* Time in ticks for reset timeouts. */
#define AP_CONFIG_TIME 30 /* Time in seconds between AP bus rescans. */
#define AP_POLL_TIME 1 /* Time in ticks between receive polls. */
+#define AP_DEFAULT_MAX_MSG_SIZE (12 * 1024)
+#define AP_TAPQ_ML_FIELD_CHUNK_SIZE (4096)
extern int ap_domain_index;
+extern atomic_t ap_max_msg_size;
extern DECLARE_HASHTABLE(ap_queues, 8);
extern spinlock_t ap_queues_lock;
@@ -167,6 +170,7 @@
unsigned int functions; /* AP device function bitfield. */
int queue_depth; /* AP queue depth.*/
int id; /* AP card number. */
+ unsigned int maxmsgsize; /* AP msg limit for this card */
bool config; /* configured state */
atomic64_t total_request_count; /* # requests ever for this AP device.*/
};
@@ -228,7 +232,8 @@
struct list_head list; /* Request queueing. */
unsigned long long psmid; /* Message id. */
void *msg; /* Pointer to message buffer. */
- unsigned int len; /* Message length. */
+ unsigned int len; /* actual msg len in msg buffer */
+ unsigned int bufsize; /* allocated msg buffer size */
u16 flags; /* Flags, see AP_MSG_FLAG_xxx */
struct ap_fi fi; /* Failure Injection cmd */
int rc; /* Return code for this message */
@@ -290,8 +295,8 @@
void ap_queue_remove(struct ap_queue *aq);
void ap_queue_init_state(struct ap_queue *aq);
-struct ap_card *ap_card_create(int id, int queue_depth, int raw_device_type,
- int comp_device_type, unsigned int functions);
+struct ap_card *ap_card_create(int id, int queue_depth, int raw_type,
+ int comp_type, unsigned int functions, int ml);
struct ap_perms {
unsigned long ioctlm[BITS_TO_LONGS(AP_IOCTLS)];
diff --git a/drivers/s390/crypto/ap_card.c b/drivers/s390/crypto/ap_card.c
index ca9afc5..196325a 100644
--- a/drivers/s390/crypto/ap_card.c
+++ b/drivers/s390/crypto/ap_card.c
@@ -174,6 +174,16 @@
static DEVICE_ATTR_RW(config);
+static ssize_t max_msg_size_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ap_card *ac = to_ap_card(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", ac->maxmsgsize);
+}
+
+static DEVICE_ATTR_RO(max_msg_size);
+
static struct attribute *ap_card_dev_attrs[] = {
&dev_attr_hwtype.attr,
&dev_attr_raw_hwtype.attr,
@@ -184,6 +194,7 @@
&dev_attr_pendingq_count.attr,
&dev_attr_modalias.attr,
&dev_attr_config.attr,
+ &dev_attr_max_msg_size.attr,
NULL
};
@@ -209,7 +220,7 @@
}
struct ap_card *ap_card_create(int id, int queue_depth, int raw_type,
- int comp_type, unsigned int functions)
+ int comp_type, unsigned int functions, int ml)
{
struct ap_card *ac;
@@ -223,5 +234,8 @@
ac->queue_depth = queue_depth;
ac->functions = functions;
ac->id = id;
+ ac->maxmsgsize = ml > 0 ?
+ ml * AP_TAPQ_ML_FIELD_CHUNK_SIZE : AP_DEFAULT_MAX_MSG_SIZE;
+
return ac;
}
diff --git a/drivers/s390/crypto/ap_queue.c b/drivers/s390/crypto/ap_queue.c
index 337353c..669f96f 100644
--- a/drivers/s390/crypto/ap_queue.c
+++ b/drivers/s390/crypto/ap_queue.c
@@ -101,7 +101,7 @@
if (msg == NULL)
return -EINVAL;
- status = ap_dqap(qid, psmid, msg, length);
+ status = ap_dqap(qid, psmid, msg, length, NULL, NULL);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
return 0;
@@ -136,9 +136,24 @@
struct ap_queue_status status;
struct ap_message *ap_msg;
bool found = false;
+ size_t reslen;
+ unsigned long resgr0 = 0;
+ int parts = 0;
- status = ap_dqap(aq->qid, &aq->reply->psmid,
- aq->reply->msg, aq->reply->len);
+ /*
+ * DQAP loop until response code and resgr0 indicate that
+ * the msg is totally received. As we use the very same buffer
+ * the msg is overwritten with each invocation. That's intended
+ * and the receiver of the msg is informed with a msg rc code
+ * of EMSGSIZE in such a case.
+ */
+ do {
+ status = ap_dqap(aq->qid, &aq->reply->psmid,
+ aq->reply->msg, aq->reply->bufsize,
+ &reslen, &resgr0);
+ parts++;
+ } while (status.response_code == 0xFF && resgr0 != 0);
+
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
aq->queue_count = max_t(int, 0, aq->queue_count - 1);
@@ -150,7 +165,12 @@
continue;
list_del_init(&ap_msg->list);
aq->pendingq_count--;
- ap_msg->receive(aq, ap_msg, aq->reply);
+ if (parts > 1) {
+ ap_msg->rc = -EMSGSIZE;
+ ap_msg->receive(aq, ap_msg, NULL);
+ } else {
+ ap_msg->receive(aq, ap_msg, aq->reply);
+ }
found = true;
break;
}
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index 5d726cd..529ffe26 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -900,6 +900,9 @@
if (xcRB->user_defined != AUTOSELECT &&
xcRB->user_defined != zc->card->id)
continue;
+ /* check if request size exceeds card max msg size */
+ if (ap_msg.len > zc->card->maxmsgsize)
+ continue;
/* check if device node has admission for this card */
if (!zcrypt_check_card(perms, zc->card->id))
continue;
@@ -1068,6 +1071,9 @@
if (targets &&
!is_desired_ep11_card(zc->card->id, target_num, targets))
continue;
+ /* check if request size exceeds card max msg size */
+ if (ap_msg.len > zc->card->maxmsgsize)
+ continue;
/* check if device node has admission for this card */
if (!zcrypt_check_card(perms, zc->card->id))
continue;
diff --git a/drivers/s390/crypto/zcrypt_cex4.c b/drivers/s390/crypto/zcrypt_cex4.c
index f4a6d37..f518b5f 100644
--- a/drivers/s390/crypto/zcrypt_cex4.c
+++ b/drivers/s390/crypto/zcrypt_cex4.c
@@ -28,9 +28,6 @@
#define CEX4C_MIN_MOD_SIZE 16 /* 256 bits */
#define CEX4C_MAX_MOD_SIZE 512 /* 4096 bits */
-#define CEX4A_MAX_MESSAGE_SIZE MSGTYPE50_CRB3_MAX_MSG_SIZE
-#define CEX4C_MAX_MESSAGE_SIZE MSGTYPE06_MAX_MSG_SIZE
-
/* Waiting time for requests to be processed.
* Currently there are some types of request which are not deterministic.
* But the maximum time limit managed by the stomper code is set to 60sec.
@@ -605,19 +602,19 @@
int rc;
if (ap_test_bit(&aq->card->functions, AP_FUNC_ACCEL)) {
- zq = zcrypt_queue_alloc(CEX4A_MAX_MESSAGE_SIZE);
+ zq = zcrypt_queue_alloc(aq->card->maxmsgsize);
if (!zq)
return -ENOMEM;
zq->ops = zcrypt_msgtype(MSGTYPE50_NAME,
MSGTYPE50_VARIANT_DEFAULT);
} else if (ap_test_bit(&aq->card->functions, AP_FUNC_COPRO)) {
- zq = zcrypt_queue_alloc(CEX4C_MAX_MESSAGE_SIZE);
+ zq = zcrypt_queue_alloc(aq->card->maxmsgsize);
if (!zq)
return -ENOMEM;
zq->ops = zcrypt_msgtype(MSGTYPE06_NAME,
MSGTYPE06_VARIANT_DEFAULT);
} else if (ap_test_bit(&aq->card->functions, AP_FUNC_EP11)) {
- zq = zcrypt_queue_alloc(CEX4C_MAX_MESSAGE_SIZE);
+ zq = zcrypt_queue_alloc(aq->card->maxmsgsize);
if (!zq)
return -ENOMEM;
zq->ops = zcrypt_msgtype(MSGTYPE06_NAME,
diff --git a/drivers/s390/crypto/zcrypt_msgtype50.c b/drivers/s390/crypto/zcrypt_msgtype50.c
index 6d1800c..9940547 100644
--- a/drivers/s390/crypto/zcrypt_msgtype50.c
+++ b/drivers/s390/crypto/zcrypt_msgtype50.c
@@ -442,11 +442,13 @@
goto out; /* ap_msg->rc indicates the error */
t80h = reply->msg;
if (t80h->type == TYPE80_RSP_CODE) {
- if (aq->ap_dev.device_type == AP_DEVICE_TYPE_CEX2A)
- len = min_t(int, CEX2A_MAX_RESPONSE_SIZE, t80h->len);
- else
- len = min_t(int, CEX3A_MAX_RESPONSE_SIZE, t80h->len);
- memcpy(msg->msg, reply->msg, len);
+ len = t80h->len;
+ if (len > reply->bufsize || len > msg->bufsize) {
+ msg->rc = -EMSGSIZE;
+ } else {
+ memcpy(msg->msg, reply->msg, len);
+ msg->len = len;
+ }
} else
memcpy(msg->msg, reply->msg, sizeof(error_reply));
out:
@@ -469,10 +471,9 @@
struct completion work;
int rc;
- if (zq->zcard->user_space_type == ZCRYPT_CEX2A)
- ap_msg->msg = kmalloc(MSGTYPE50_CRB2_MAX_MSG_SIZE, GFP_KERNEL);
- else
- ap_msg->msg = kmalloc(MSGTYPE50_CRB3_MAX_MSG_SIZE, GFP_KERNEL);
+ ap_msg->bufsize = (zq->zcard->user_space_type == ZCRYPT_CEX2A) ?
+ MSGTYPE50_CRB2_MAX_MSG_SIZE : MSGTYPE50_CRB3_MAX_MSG_SIZE;
+ ap_msg->msg = kmalloc(ap_msg->bufsize, GFP_KERNEL);
if (!ap_msg->msg)
return -ENOMEM;
ap_msg->receive = zcrypt_cex2a_receive;
@@ -515,10 +516,9 @@
struct completion work;
int rc;
- if (zq->zcard->user_space_type == ZCRYPT_CEX2A)
- ap_msg->msg = kmalloc(MSGTYPE50_CRB2_MAX_MSG_SIZE, GFP_KERNEL);
- else
- ap_msg->msg = kmalloc(MSGTYPE50_CRB3_MAX_MSG_SIZE, GFP_KERNEL);
+ ap_msg->bufsize = (zq->zcard->user_space_type == ZCRYPT_CEX2A) ?
+ MSGTYPE50_CRB2_MAX_MSG_SIZE : MSGTYPE50_CRB3_MAX_MSG_SIZE;
+ ap_msg->msg = kmalloc(ap_msg->bufsize, GFP_KERNEL);
if (!ap_msg->msg)
return -ENOMEM;
ap_msg->receive = zcrypt_cex2a_receive;
diff --git a/drivers/s390/crypto/zcrypt_msgtype6.c b/drivers/s390/crypto/zcrypt_msgtype6.c
index da6b2bf7..752c639 100644
--- a/drivers/s390/crypto/zcrypt_msgtype6.c
+++ b/drivers/s390/crypto/zcrypt_msgtype6.c
@@ -403,7 +403,7 @@
} __packed * msg = ap_msg->msg;
int rcblen = CEIL4(xcRB->request_control_blk_length);
- int replylen, req_sumlen, resp_sumlen;
+ int req_sumlen, resp_sumlen;
char *req_data = ap_msg->msg + sizeof(struct type6_hdr) + rcblen;
char *function_code;
@@ -415,7 +415,7 @@
ap_msg->len = sizeof(struct type6_hdr) +
CEIL4(xcRB->request_control_blk_length) +
xcRB->request_data_length;
- if (ap_msg->len > MSGTYPE06_MAX_MSG_SIZE)
+ if (ap_msg->len > ap_msg->bufsize)
return -EINVAL;
/*
@@ -435,12 +435,6 @@
xcRB->reply_control_blk_length)
return -EINVAL; /* overflow after alignment*/
- replylen = sizeof(struct type86_fmt2_msg) +
- CEIL4(xcRB->reply_control_blk_length) +
- xcRB->reply_data_length;
- if (replylen > MSGTYPE06_MAX_MSG_SIZE)
- return -EINVAL;
-
/*
* Overflow check
* sum must be greater (or equal) than the largest operand
@@ -530,18 +524,13 @@
return -EINVAL; /* overflow after alignment*/
/* length checks */
- ap_msg->len = sizeof(struct type6_hdr) + xcRB->req_len;
- if (CEIL4(xcRB->req_len) > MSGTYPE06_MAX_MSG_SIZE -
- (sizeof(struct type6_hdr)))
+ ap_msg->len = sizeof(struct type6_hdr) + CEIL4(xcRB->req_len);
+ if (ap_msg->len > ap_msg->bufsize)
return -EINVAL;
if (CEIL4(xcRB->resp_len) < xcRB->resp_len)
return -EINVAL; /* overflow after alignment*/
- if (CEIL4(xcRB->resp_len) > MSGTYPE06_MAX_MSG_SIZE -
- (sizeof(struct type86_fmt2_msg)))
- return -EINVAL;
-
/* prepare type6 header */
msg->hdr = static_type6_ep11_hdr;
msg->hdr.ToCardLen1 = xcRB->req_len;
@@ -952,13 +941,21 @@
switch (resp_type->type) {
case CEXXC_RESPONSE_TYPE_ICA:
len = sizeof(struct type86x_reply) + t86r->length - 2;
- len = min_t(int, CEXXC_MAX_ICA_RESPONSE_SIZE, len);
- memcpy(msg->msg, reply->msg, len);
+ if (len > reply->bufsize || len > msg->bufsize) {
+ msg->rc = -EMSGSIZE;
+ } else {
+ memcpy(msg->msg, reply->msg, len);
+ msg->len = len;
+ }
break;
case CEXXC_RESPONSE_TYPE_XCRB:
len = t86r->fmt2.offset2 + t86r->fmt2.count2;
- len = min_t(int, MSGTYPE06_MAX_MSG_SIZE, len);
- memcpy(msg->msg, reply->msg, len);
+ if (len > reply->bufsize || len > msg->bufsize) {
+ msg->rc = -EMSGSIZE;
+ } else {
+ memcpy(msg->msg, reply->msg, len);
+ msg->len = len;
+ }
break;
default:
memcpy(msg->msg, &error_reply, sizeof(error_reply));
@@ -999,8 +996,12 @@
switch (resp_type->type) {
case CEXXC_RESPONSE_TYPE_EP11:
len = t86r->fmt2.offset1 + t86r->fmt2.count1;
- len = min_t(int, MSGTYPE06_MAX_MSG_SIZE, len);
- memcpy(msg->msg, reply->msg, len);
+ if (len > reply->bufsize || len > msg->bufsize) {
+ msg->rc = -EMSGSIZE;
+ } else {
+ memcpy(msg->msg, reply->msg, len);
+ msg->len = len;
+ }
break;
default:
memcpy(msg->msg, &error_reply, sizeof(error_reply));
@@ -1033,6 +1034,7 @@
ap_msg->msg = (void *) get_zeroed_page(GFP_KERNEL);
if (!ap_msg->msg)
return -ENOMEM;
+ ap_msg->bufsize = PAGE_SIZE;
ap_msg->receive = zcrypt_msgtype6_receive;
ap_msg->psmid = (((unsigned long long) current->pid) << 32) +
atomic_inc_return(&zcrypt_step);
@@ -1080,6 +1082,7 @@
ap_msg->msg = (void *) get_zeroed_page(GFP_KERNEL);
if (!ap_msg->msg)
return -ENOMEM;
+ ap_msg->bufsize = PAGE_SIZE;
ap_msg->receive = zcrypt_msgtype6_receive;
ap_msg->psmid = (((unsigned long long) current->pid) << 32) +
atomic_inc_return(&zcrypt_step);
@@ -1124,7 +1127,8 @@
.type = CEXXC_RESPONSE_TYPE_XCRB,
};
- ap_msg->msg = kmalloc(MSGTYPE06_MAX_MSG_SIZE, GFP_KERNEL);
+ ap_msg->bufsize = atomic_read(&ap_max_msg_size);
+ ap_msg->msg = kmalloc(ap_msg->bufsize, GFP_KERNEL);
if (!ap_msg->msg)
return -ENOMEM;
ap_msg->receive = zcrypt_msgtype6_receive;
@@ -1181,7 +1185,8 @@
.type = CEXXC_RESPONSE_TYPE_EP11,
};
- ap_msg->msg = kmalloc(MSGTYPE06_MAX_MSG_SIZE, GFP_KERNEL);
+ ap_msg->bufsize = atomic_read(&ap_max_msg_size);
+ ap_msg->msg = kmalloc(ap_msg->bufsize, GFP_KERNEL);
if (!ap_msg->msg)
return -ENOMEM;
ap_msg->receive = zcrypt_msgtype6_receive_ep11;
@@ -1277,7 +1282,8 @@
.type = CEXXC_RESPONSE_TYPE_XCRB,
};
- ap_msg->msg = kmalloc(MSGTYPE06_MAX_MSG_SIZE, GFP_KERNEL);
+ ap_msg->bufsize = AP_DEFAULT_MAX_MSG_SIZE;
+ ap_msg->msg = kmalloc(ap_msg->bufsize, GFP_KERNEL);
if (!ap_msg->msg)
return -ENOMEM;
ap_msg->receive = zcrypt_msgtype6_receive;
diff --git a/drivers/s390/crypto/zcrypt_msgtype6.h b/drivers/s390/crypto/zcrypt_msgtype6.h
index 0a0bf07..155c735 100644
--- a/drivers/s390/crypto/zcrypt_msgtype6.h
+++ b/drivers/s390/crypto/zcrypt_msgtype6.h
@@ -19,8 +19,6 @@
#define MSGTYPE06_VARIANT_NORNG 1
#define MSGTYPE06_VARIANT_EP11 2
-#define MSGTYPE06_MAX_MSG_SIZE (12*1024)
-
/**
* The type 6 message family is associated with CEXxC/CEXxP cards.
*
diff --git a/drivers/s390/crypto/zcrypt_queue.c b/drivers/s390/crypto/zcrypt_queue.c
index 605904b..20f1228 100644
--- a/drivers/s390/crypto/zcrypt_queue.c
+++ b/drivers/s390/crypto/zcrypt_queue.c
@@ -111,17 +111,17 @@
return false;
}
-struct zcrypt_queue *zcrypt_queue_alloc(size_t max_response_size)
+struct zcrypt_queue *zcrypt_queue_alloc(size_t reply_buf_size)
{
struct zcrypt_queue *zq;
zq = kzalloc(sizeof(struct zcrypt_queue), GFP_KERNEL);
if (!zq)
return NULL;
- zq->reply.msg = kmalloc(max_response_size, GFP_KERNEL);
+ zq->reply.msg = kmalloc(reply_buf_size, GFP_KERNEL);
if (!zq->reply.msg)
goto out_free;
- zq->reply.len = max_response_size;
+ zq->reply.bufsize = reply_buf_size;
INIT_LIST_HEAD(&zq->list);
kref_init(&zq->refcount);
return zq;
diff --git a/drivers/soc/amlogic/meson-ee-pwrc.c b/drivers/soc/amlogic/meson-ee-pwrc.c
index 50bf5d2..2be3afe 100644
--- a/drivers/soc/amlogic/meson-ee-pwrc.c
+++ b/drivers/soc/amlogic/meson-ee-pwrc.c
@@ -68,7 +68,7 @@
struct meson_ee_pwrc_top_domain *top_pd;
unsigned int mem_pd_count;
struct meson_ee_pwrc_mem_domain *mem_pd;
- bool (*get_power)(struct meson_ee_pwrc_domain *pwrc_domain);
+ bool (*is_powered_off)(struct meson_ee_pwrc_domain *pwrc_domain);
};
struct meson_ee_pwrc_domain_data {
@@ -217,7 +217,7 @@
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(27, 26) },
};
-#define VPU_PD(__name, __top_pd, __mem, __get_power, __resets, __clks) \
+#define VPU_PD(__name, __top_pd, __mem, __is_pwr_off, __resets, __clks) \
{ \
.name = __name, \
.reset_names_count = __resets, \
@@ -225,46 +225,46 @@
.top_pd = __top_pd, \
.mem_pd_count = ARRAY_SIZE(__mem), \
.mem_pd = __mem, \
- .get_power = __get_power, \
+ .is_powered_off = __is_pwr_off, \
}
-#define TOP_PD(__name, __top_pd, __mem, __get_power) \
+#define TOP_PD(__name, __top_pd, __mem, __is_pwr_off) \
{ \
.name = __name, \
.top_pd = __top_pd, \
.mem_pd_count = ARRAY_SIZE(__mem), \
.mem_pd = __mem, \
- .get_power = __get_power, \
+ .is_powered_off = __is_pwr_off, \
}
#define MEM_PD(__name, __mem) \
TOP_PD(__name, NULL, __mem, NULL)
-static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain);
+static bool pwrc_ee_is_powered_off(struct meson_ee_pwrc_domain *pwrc_domain);
static struct meson_ee_pwrc_domain_desc axg_pwrc_domains[] = {
[PWRC_AXG_VPU_ID] = VPU_PD("VPU", &gx_pwrc_vpu, axg_pwrc_mem_vpu,
- pwrc_ee_get_power, 5, 2),
+ pwrc_ee_is_powered_off, 5, 2),
[PWRC_AXG_ETHERNET_MEM_ID] = MEM_PD("ETH", meson_pwrc_mem_eth),
[PWRC_AXG_AUDIO_ID] = MEM_PD("AUDIO", axg_pwrc_mem_audio),
};
static struct meson_ee_pwrc_domain_desc g12a_pwrc_domains[] = {
[PWRC_G12A_VPU_ID] = VPU_PD("VPU", &gx_pwrc_vpu, g12a_pwrc_mem_vpu,
- pwrc_ee_get_power, 11, 2),
+ pwrc_ee_is_powered_off, 11, 2),
[PWRC_G12A_ETH_ID] = MEM_PD("ETH", meson_pwrc_mem_eth),
};
static struct meson_ee_pwrc_domain_desc gxbb_pwrc_domains[] = {
[PWRC_GXBB_VPU_ID] = VPU_PD("VPU", &gx_pwrc_vpu, gxbb_pwrc_mem_vpu,
- pwrc_ee_get_power, 12, 2),
+ pwrc_ee_is_powered_off, 12, 2),
[PWRC_GXBB_ETHERNET_MEM_ID] = MEM_PD("ETH", meson_pwrc_mem_eth),
};
static struct meson_ee_pwrc_domain_desc meson8_pwrc_domains[] = {
[PWRC_MESON8_VPU_ID] = VPU_PD("VPU", &meson8_pwrc_vpu,
- meson8_pwrc_mem_vpu, pwrc_ee_get_power,
- 0, 1),
+ meson8_pwrc_mem_vpu,
+ pwrc_ee_is_powered_off, 0, 1),
[PWRC_MESON8_ETHERNET_MEM_ID] = MEM_PD("ETHERNET_MEM",
meson_pwrc_mem_eth),
[PWRC_MESON8_AUDIO_DSP_MEM_ID] = MEM_PD("AUDIO_DSP_MEM",
@@ -273,8 +273,8 @@
static struct meson_ee_pwrc_domain_desc meson8b_pwrc_domains[] = {
[PWRC_MESON8_VPU_ID] = VPU_PD("VPU", &meson8_pwrc_vpu,
- meson8_pwrc_mem_vpu, pwrc_ee_get_power,
- 11, 1),
+ meson8_pwrc_mem_vpu,
+ pwrc_ee_is_powered_off, 11, 1),
[PWRC_MESON8_ETHERNET_MEM_ID] = MEM_PD("ETHERNET_MEM",
meson_pwrc_mem_eth),
[PWRC_MESON8_AUDIO_DSP_MEM_ID] = MEM_PD("AUDIO_DSP_MEM",
@@ -283,15 +283,15 @@
static struct meson_ee_pwrc_domain_desc sm1_pwrc_domains[] = {
[PWRC_SM1_VPU_ID] = VPU_PD("VPU", &sm1_pwrc_vpu, sm1_pwrc_mem_vpu,
- pwrc_ee_get_power, 11, 2),
+ pwrc_ee_is_powered_off, 11, 2),
[PWRC_SM1_NNA_ID] = TOP_PD("NNA", &sm1_pwrc_nna, sm1_pwrc_mem_nna,
- pwrc_ee_get_power),
+ pwrc_ee_is_powered_off),
[PWRC_SM1_USB_ID] = TOP_PD("USB", &sm1_pwrc_usb, sm1_pwrc_mem_usb,
- pwrc_ee_get_power),
+ pwrc_ee_is_powered_off),
[PWRC_SM1_PCIE_ID] = TOP_PD("PCI", &sm1_pwrc_pci, sm1_pwrc_mem_pcie,
- pwrc_ee_get_power),
+ pwrc_ee_is_powered_off),
[PWRC_SM1_GE2D_ID] = TOP_PD("GE2D", &sm1_pwrc_ge2d, sm1_pwrc_mem_ge2d,
- pwrc_ee_get_power),
+ pwrc_ee_is_powered_off),
[PWRC_SM1_AUDIO_ID] = MEM_PD("AUDIO", sm1_pwrc_mem_audio),
[PWRC_SM1_ETH_ID] = MEM_PD("ETH", meson_pwrc_mem_eth),
};
@@ -314,7 +314,7 @@
struct genpd_onecell_data xlate;
};
-static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain)
+static bool pwrc_ee_is_powered_off(struct meson_ee_pwrc_domain *pwrc_domain)
{
u32 reg;
@@ -445,7 +445,7 @@
* we need to power the domain off, otherwise the internal clocks
* prepare/enable counters won't be in sync.
*/
- if (dom->num_clks && dom->desc.get_power && !dom->desc.get_power(dom)) {
+ if (dom->num_clks && dom->desc.is_powered_off && !dom->desc.is_powered_off(dom)) {
ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
if (ret)
return ret;
@@ -456,8 +456,8 @@
return ret;
} else {
ret = pm_genpd_init(&dom->base, NULL,
- (dom->desc.get_power ?
- dom->desc.get_power(dom) : true));
+ (dom->desc.is_powered_off ?
+ dom->desc.is_powered_off(dom) : true));
if (ret)
return ret;
}
@@ -536,7 +536,7 @@
for (i = 0 ; i < pwrc->xlate.num_domains ; ++i) {
struct meson_ee_pwrc_domain *dom = &pwrc->domains[i];
- if (dom->desc.get_power && !dom->desc.get_power(dom))
+ if (dom->desc.is_powered_off && !dom->desc.is_powered_off(dom))
meson_ee_pwrc_off(&dom->base);
}
}
diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
index e87dfc6..2a01088 100644
--- a/drivers/soc/bcm/brcmstb/common.c
+++ b/drivers/soc/bcm/brcmstb/common.c
@@ -14,11 +14,6 @@
static u32 family_id;
static u32 product_id;
-static const struct of_device_id brcmstb_machine_match[] = {
- { .compatible = "brcm,brcmstb", },
- { }
-};
-
u32 brcmstb_get_family_id(void)
{
return family_id;
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index db7e7fc..34a9ac1 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -12,11 +12,15 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
#include <linux/sizes.h>
#include <dt-bindings/power/imx7-power.h>
#include <dt-bindings/power/imx8mq-power.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/power/imx8mn-power.h>
#define GPC_LPCR_A_CORE_BSC 0x000
@@ -42,6 +46,25 @@
#define IMX8M_PCIE1_A53_DOMAIN BIT(3)
#define IMX8M_MIPI_A53_DOMAIN BIT(2)
+#define IMX8MM_VPUH1_A53_DOMAIN BIT(15)
+#define IMX8MM_VPUG2_A53_DOMAIN BIT(14)
+#define IMX8MM_VPUG1_A53_DOMAIN BIT(13)
+#define IMX8MM_DISPMIX_A53_DOMAIN BIT(12)
+#define IMX8MM_VPUMIX_A53_DOMAIN BIT(10)
+#define IMX8MM_GPUMIX_A53_DOMAIN BIT(9)
+#define IMX8MM_GPU_A53_DOMAIN (BIT(8) | BIT(11))
+#define IMX8MM_DDR1_A53_DOMAIN BIT(7)
+#define IMX8MM_OTG2_A53_DOMAIN BIT(5)
+#define IMX8MM_OTG1_A53_DOMAIN BIT(4)
+#define IMX8MM_PCIE_A53_DOMAIN BIT(3)
+#define IMX8MM_MIPI_A53_DOMAIN BIT(2)
+
+#define IMX8MN_DISPMIX_A53_DOMAIN BIT(12)
+#define IMX8MN_GPUMIX_A53_DOMAIN BIT(9)
+#define IMX8MN_DDR1_A53_DOMAIN BIT(7)
+#define IMX8MN_OTG1_A53_DOMAIN BIT(4)
+#define IMX8MN_MIPI_A53_DOMAIN BIT(2)
+
#define GPC_PU_PGC_SW_PUP_REQ 0x0f8
#define GPC_PU_PGC_SW_PDN_REQ 0x104
@@ -65,14 +88,55 @@
#define IMX8M_PCIE1_SW_Pxx_REQ BIT(1)
#define IMX8M_MIPI_SW_Pxx_REQ BIT(0)
+#define IMX8MM_VPUH1_SW_Pxx_REQ BIT(13)
+#define IMX8MM_VPUG2_SW_Pxx_REQ BIT(12)
+#define IMX8MM_VPUG1_SW_Pxx_REQ BIT(11)
+#define IMX8MM_DISPMIX_SW_Pxx_REQ BIT(10)
+#define IMX8MM_VPUMIX_SW_Pxx_REQ BIT(8)
+#define IMX8MM_GPUMIX_SW_Pxx_REQ BIT(7)
+#define IMX8MM_GPU_SW_Pxx_REQ (BIT(6) | BIT(9))
+#define IMX8MM_DDR1_SW_Pxx_REQ BIT(5)
+#define IMX8MM_OTG2_SW_Pxx_REQ BIT(3)
+#define IMX8MM_OTG1_SW_Pxx_REQ BIT(2)
+#define IMX8MM_PCIE_SW_Pxx_REQ BIT(1)
+#define IMX8MM_MIPI_SW_Pxx_REQ BIT(0)
+
+#define IMX8MN_DISPMIX_SW_Pxx_REQ BIT(10)
+#define IMX8MN_GPUMIX_SW_Pxx_REQ BIT(7)
+#define IMX8MN_DDR1_SW_Pxx_REQ BIT(5)
+#define IMX8MN_OTG1_SW_Pxx_REQ BIT(2)
+#define IMX8MN_MIPI_SW_Pxx_REQ BIT(0)
+
#define GPC_M4_PU_PDN_FLG 0x1bc
#define GPC_PU_PWRHSK 0x1fc
+#define IMX8M_GPU_HSK_PWRDNACKN BIT(26)
+#define IMX8M_VPU_HSK_PWRDNACKN BIT(25)
+#define IMX8M_DISP_HSK_PWRDNACKN BIT(24)
#define IMX8M_GPU_HSK_PWRDNREQN BIT(6)
#define IMX8M_VPU_HSK_PWRDNREQN BIT(5)
#define IMX8M_DISP_HSK_PWRDNREQN BIT(4)
+
+#define IMX8MM_GPUMIX_HSK_PWRDNACKN BIT(29)
+#define IMX8MM_GPU_HSK_PWRDNACKN (BIT(27) | BIT(28))
+#define IMX8MM_VPUMIX_HSK_PWRDNACKN BIT(26)
+#define IMX8MM_DISPMIX_HSK_PWRDNACKN BIT(25)
+#define IMX8MM_HSIO_HSK_PWRDNACKN (BIT(23) | BIT(24))
+#define IMX8MM_GPUMIX_HSK_PWRDNREQN BIT(11)
+#define IMX8MM_GPU_HSK_PWRDNREQN (BIT(9) | BIT(10))
+#define IMX8MM_VPUMIX_HSK_PWRDNREQN BIT(8)
+#define IMX8MM_DISPMIX_HSK_PWRDNREQN BIT(7)
+#define IMX8MM_HSIO_HSK_PWRDNREQN (BIT(5) | BIT(6))
+
+#define IMX8MN_GPUMIX_HSK_PWRDNACKN (BIT(29) | BIT(27))
+#define IMX8MN_DISPMIX_HSK_PWRDNACKN BIT(25)
+#define IMX8MN_HSIO_HSK_PWRDNACKN BIT(23)
+#define IMX8MN_GPUMIX_HSK_PWRDNREQN (BIT(11) | BIT(9))
+#define IMX8MN_DISPMIX_HSK_PWRDNREQN BIT(7)
+#define IMX8MN_HSIO_HSK_PWRDNREQN BIT(5)
+
/*
* The PGC offset values in Reference Manual
* (Rev. 1, 01/2018 and the older ones) GPC chapter's
@@ -95,18 +159,37 @@
#define IMX8M_PGC_MIPI_CSI2 28
#define IMX8M_PGC_PCIE2 29
+#define IMX8MM_PGC_MIPI 16
+#define IMX8MM_PGC_PCIE 17
+#define IMX8MM_PGC_OTG1 18
+#define IMX8MM_PGC_OTG2 19
+#define IMX8MM_PGC_DDR1 21
+#define IMX8MM_PGC_GPU2D 22
+#define IMX8MM_PGC_GPUMIX 23
+#define IMX8MM_PGC_VPUMIX 24
+#define IMX8MM_PGC_GPU3D 25
+#define IMX8MM_PGC_DISPMIX 26
+#define IMX8MM_PGC_VPUG1 27
+#define IMX8MM_PGC_VPUG2 28
+#define IMX8MM_PGC_VPUH1 29
+
+#define IMX8MN_PGC_MIPI 16
+#define IMX8MN_PGC_OTG1 18
+#define IMX8MN_PGC_DDR1 21
+#define IMX8MN_PGC_GPUMIX 23
+#define IMX8MN_PGC_DISPMIX 26
+
#define GPC_PGC_CTRL(n) (0x800 + (n) * 0x40)
#define GPC_PGC_SR(n) (GPC_PGC_CTRL(n) + 0xc)
#define GPC_PGC_CTRL_PCR BIT(0)
-#define GPC_CLK_MAX 6
-
struct imx_pgc_domain {
struct generic_pm_domain genpd;
struct regmap *regmap;
struct regulator *regulator;
- struct clk *clk[GPC_CLK_MAX];
+ struct reset_control *reset;
+ struct clk_bulk_data *clks;
int num_clks;
unsigned int pgc;
@@ -114,7 +197,8 @@
const struct {
u32 pxx;
u32 map;
- u32 hsk;
+ u32 hskreq;
+ u32 hskack;
} bits;
const int voltage;
@@ -127,96 +211,172 @@
const struct regmap_access_table *reg_access_table;
};
-static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
- bool on)
+static inline struct imx_pgc_domain *
+to_imx_pgc_domain(struct generic_pm_domain *genpd)
{
- struct imx_pgc_domain *domain = container_of(genpd,
- struct imx_pgc_domain,
- genpd);
- unsigned int offset = on ?
- GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
- const bool enable_power_control = !on;
- const bool has_regulator = !IS_ERR(domain->regulator);
- int i, ret = 0;
- u32 pxx_req;
+ return container_of(genpd, struct imx_pgc_domain, genpd);
+}
- regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
- domain->bits.map, domain->bits.map);
+static int imx_pgc_power_up(struct generic_pm_domain *genpd)
+{
+ struct imx_pgc_domain *domain = to_imx_pgc_domain(genpd);
+ u32 reg_val;
+ int ret;
- if (has_regulator && on) {
+ ret = pm_runtime_get_sync(domain->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(domain->dev);
+ return ret;
+ }
+
+ if (!IS_ERR(domain->regulator)) {
ret = regulator_enable(domain->regulator);
if (ret) {
dev_err(domain->dev, "failed to enable regulator\n");
- goto unmap;
+ goto out_put_pm;
}
}
/* Enable reset clocks for all devices in the domain */
- for (i = 0; i < domain->num_clks; i++)
- clk_prepare_enable(domain->clk[i]);
-
- if (enable_power_control)
- regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
- GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
-
- if (domain->bits.hsk)
- regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
- domain->bits.hsk, on ? domain->bits.hsk : 0);
-
- regmap_update_bits(domain->regmap, offset,
- domain->bits.pxx, domain->bits.pxx);
-
- /*
- * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
- * for PUP_REQ/PDN_REQ bit to be cleared
- */
- ret = regmap_read_poll_timeout(domain->regmap, offset, pxx_req,
- !(pxx_req & domain->bits.pxx),
- 0, USEC_PER_MSEC);
+ ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
if (ret) {
- dev_err(domain->dev, "failed to command PGC\n");
- /*
- * If we were in a process of enabling a
- * domain and failed we might as well disable
- * the regulator we just enabled. And if it
- * was the opposite situation and we failed to
- * power down -- keep the regulator on
- */
- on = !on;
+ dev_err(domain->dev, "failed to enable reset clocks\n");
+ goto out_regulator_disable;
}
- if (enable_power_control)
- regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
- GPC_PGC_CTRL_PCR, 0);
+ if (domain->bits.pxx) {
+ /* request the domain to power up */
+ regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
+ domain->bits.pxx, domain->bits.pxx);
+ /*
+ * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
+ * for PUP_REQ/PDN_REQ bit to be cleared
+ */
+ ret = regmap_read_poll_timeout(domain->regmap,
+ GPC_PU_PGC_SW_PUP_REQ, reg_val,
+ !(reg_val & domain->bits.pxx),
+ 0, USEC_PER_MSEC);
+ if (ret) {
+ dev_err(domain->dev, "failed to command PGC\n");
+ goto out_clk_disable;
+ }
+
+ /* disable power control */
+ regmap_clear_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+ GPC_PGC_CTRL_PCR);
+ }
+
+ reset_control_assert(domain->reset);
+
+ /* delay for reset to propagate */
+ udelay(5);
+
+ reset_control_deassert(domain->reset);
+
+ /* request the ADB400 to power up */
+ if (domain->bits.hskreq) {
+ regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
+ domain->bits.hskreq, domain->bits.hskreq);
+
+ /*
+ * ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PWRHSK, reg_val,
+ * (reg_val & domain->bits.hskack), 0,
+ * USEC_PER_MSEC);
+ * Technically we need the commented code to wait handshake. But that needs
+ * the BLK-CTL module BUS clk-en bit being set.
+ *
+ * There is a separate BLK-CTL module and we will have such a driver for it,
+ * that driver will set the BUS clk-en bit and handshake will be triggered
+ * automatically there. Just add a delay and suppose the handshake finish
+ * after that.
+ */
+ }
/* Disable reset clocks for all devices in the domain */
- for (i = 0; i < domain->num_clks; i++)
- clk_disable_unprepare(domain->clk[i]);
+ clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
- if (has_regulator && !on) {
- int err;
+ return 0;
- err = regulator_disable(domain->regulator);
- if (err)
- dev_err(domain->dev,
- "failed to disable regulator: %d\n", err);
- /* Preserve earlier error code */
- ret = ret ?: err;
- }
-unmap:
- regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
- domain->bits.map, 0);
+out_clk_disable:
+ clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+out_regulator_disable:
+ if (!IS_ERR(domain->regulator))
+ regulator_disable(domain->regulator);
+out_put_pm:
+ pm_runtime_put(domain->dev);
+
return ret;
}
-static int imx_gpc_pu_pgc_sw_pup_req(struct generic_pm_domain *genpd)
+static int imx_pgc_power_down(struct generic_pm_domain *genpd)
{
- return imx_gpc_pu_pgc_sw_pxx_req(genpd, true);
-}
+ struct imx_pgc_domain *domain = to_imx_pgc_domain(genpd);
+ u32 reg_val;
+ int ret;
-static int imx_gpc_pu_pgc_sw_pdn_req(struct generic_pm_domain *genpd)
-{
- return imx_gpc_pu_pgc_sw_pxx_req(genpd, false);
+ /* Enable reset clocks for all devices in the domain */
+ ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
+ if (ret) {
+ dev_err(domain->dev, "failed to enable reset clocks\n");
+ return ret;
+ }
+
+ /* request the ADB400 to power down */
+ if (domain->bits.hskreq) {
+ regmap_clear_bits(domain->regmap, GPC_PU_PWRHSK,
+ domain->bits.hskreq);
+
+ ret = regmap_read_poll_timeout(domain->regmap, GPC_PU_PWRHSK,
+ reg_val,
+ !(reg_val & domain->bits.hskack),
+ 0, USEC_PER_MSEC);
+ if (ret) {
+ dev_err(domain->dev, "failed to power down ADB400\n");
+ goto out_clk_disable;
+ }
+ }
+
+ if (domain->bits.pxx) {
+ /* enable power control */
+ regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
+ GPC_PGC_CTRL_PCR, GPC_PGC_CTRL_PCR);
+
+ /* request the domain to power down */
+ regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PDN_REQ,
+ domain->bits.pxx, domain->bits.pxx);
+ /*
+ * As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
+ * for PUP_REQ/PDN_REQ bit to be cleared
+ */
+ ret = regmap_read_poll_timeout(domain->regmap,
+ GPC_PU_PGC_SW_PDN_REQ, reg_val,
+ !(reg_val & domain->bits.pxx),
+ 0, USEC_PER_MSEC);
+ if (ret) {
+ dev_err(domain->dev, "failed to command PGC\n");
+ goto out_clk_disable;
+ }
+ }
+
+ /* Disable reset clocks for all devices in the domain */
+ clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+
+ if (!IS_ERR(domain->regulator)) {
+ ret = regulator_disable(domain->regulator);
+ if (ret) {
+ dev_err(domain->dev, "failed to disable regulator\n");
+ return ret;
+ }
+ }
+
+ pm_runtime_put(domain->dev);
+
+ return 0;
+
+out_clk_disable:
+ clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+
+ return ret;
}
static const struct imx_pgc_domain imx7_pgc_domains[] = {
@@ -342,7 +502,8 @@
.bits = {
.pxx = IMX8M_GPU_SW_Pxx_REQ,
.map = IMX8M_GPU_A53_DOMAIN,
- .hsk = IMX8M_GPU_HSK_PWRDNREQN,
+ .hskreq = IMX8M_GPU_HSK_PWRDNREQN,
+ .hskack = IMX8M_GPU_HSK_PWRDNACKN,
},
.pgc = IMX8M_PGC_GPU,
},
@@ -354,7 +515,8 @@
.bits = {
.pxx = IMX8M_VPU_SW_Pxx_REQ,
.map = IMX8M_VPU_A53_DOMAIN,
- .hsk = IMX8M_VPU_HSK_PWRDNREQN,
+ .hskreq = IMX8M_VPU_HSK_PWRDNREQN,
+ .hskack = IMX8M_VPU_HSK_PWRDNACKN,
},
.pgc = IMX8M_PGC_VPU,
},
@@ -366,7 +528,8 @@
.bits = {
.pxx = IMX8M_DISP_SW_Pxx_REQ,
.map = IMX8M_DISP_A53_DOMAIN,
- .hsk = IMX8M_DISP_HSK_PWRDNREQN,
+ .hskreq = IMX8M_DISP_HSK_PWRDNREQN,
+ .hskack = IMX8M_DISP_HSK_PWRDNACKN,
},
.pgc = IMX8M_PGC_DISP,
},
@@ -443,40 +606,254 @@
.reg_access_table = &imx8m_access_table,
};
-static int imx_pgc_get_clocks(struct imx_pgc_domain *domain)
-{
- int i, ret;
+static const struct imx_pgc_domain imx8mm_pgc_domains[] = {
+ [IMX8MM_POWER_DOMAIN_HSIOMIX] = {
+ .genpd = {
+ .name = "hsiomix",
+ },
+ .bits = {
+ .pxx = 0, /* no power sequence control */
+ .map = 0, /* no power sequence control */
+ .hskreq = IMX8MM_HSIO_HSK_PWRDNREQN,
+ .hskack = IMX8MM_HSIO_HSK_PWRDNACKN,
+ },
+ },
- for (i = 0; ; i++) {
- struct clk *clk = of_clk_get(domain->dev->of_node, i);
- if (IS_ERR(clk))
- break;
- if (i >= GPC_CLK_MAX) {
- dev_err(domain->dev, "more than %d clocks\n",
- GPC_CLK_MAX);
- ret = -EINVAL;
- goto clk_err;
- }
- domain->clk[i] = clk;
- }
- domain->num_clks = i;
+ [IMX8MM_POWER_DOMAIN_PCIE] = {
+ .genpd = {
+ .name = "pcie",
+ },
+ .bits = {
+ .pxx = IMX8MM_PCIE_SW_Pxx_REQ,
+ .map = IMX8MM_PCIE_A53_DOMAIN,
+ },
+ .pgc = IMX8MM_PGC_PCIE,
+ },
- return 0;
+ [IMX8MM_POWER_DOMAIN_OTG1] = {
+ .genpd = {
+ .name = "usb-otg1",
+ },
+ .bits = {
+ .pxx = IMX8MM_OTG1_SW_Pxx_REQ,
+ .map = IMX8MM_OTG1_A53_DOMAIN,
+ },
+ .pgc = IMX8MM_PGC_OTG1,
+ },
-clk_err:
- while (i--)
- clk_put(domain->clk[i]);
+ [IMX8MM_POWER_DOMAIN_OTG2] = {
+ .genpd = {
+ .name = "usb-otg2",
+ },
+ .bits = {
+ .pxx = IMX8MM_OTG2_SW_Pxx_REQ,
+ .map = IMX8MM_OTG2_A53_DOMAIN,
+ },
+ .pgc = IMX8MM_PGC_OTG2,
+ },
- return ret;
-}
+ [IMX8MM_POWER_DOMAIN_GPUMIX] = {
+ .genpd = {
+ .name = "gpumix",
+ },
+ .bits = {
+ .pxx = IMX8MM_GPUMIX_SW_Pxx_REQ,
+ .map = IMX8MM_GPUMIX_A53_DOMAIN,
+ .hskreq = IMX8MM_GPUMIX_HSK_PWRDNREQN,
+ .hskack = IMX8MM_GPUMIX_HSK_PWRDNACKN,
+ },
+ .pgc = IMX8MM_PGC_GPUMIX,
+ },
-static void imx_pgc_put_clocks(struct imx_pgc_domain *domain)
-{
- int i;
+ [IMX8MM_POWER_DOMAIN_GPU] = {
+ .genpd = {
+ .name = "gpu",
+ },
+ .bits = {
+ .pxx = IMX8MM_GPU_SW_Pxx_REQ,
+ .map = IMX8MM_GPU_A53_DOMAIN,
+ .hskreq = IMX8MM_GPU_HSK_PWRDNREQN,
+ .hskack = IMX8MM_GPU_HSK_PWRDNACKN,
+ },
+ .pgc = IMX8MM_PGC_GPU2D,
+ },
- for (i = domain->num_clks - 1; i >= 0; i--)
- clk_put(domain->clk[i]);
-}
+ [IMX8MM_POWER_DOMAIN_VPUMIX] = {
+ .genpd = {
+ .name = "vpumix",
+ },
+ .bits = {
+ .pxx = IMX8MM_VPUMIX_SW_Pxx_REQ,
+ .map = IMX8MM_VPUMIX_A53_DOMAIN,
+ .hskreq = IMX8MM_VPUMIX_HSK_PWRDNREQN,
+ .hskack = IMX8MM_VPUMIX_HSK_PWRDNACKN,
+ },
+ .pgc = IMX8MM_PGC_VPUMIX,
+ },
+
+ [IMX8MM_POWER_DOMAIN_VPUG1] = {
+ .genpd = {
+ .name = "vpu-g1",
+ },
+ .bits = {
+ .pxx = IMX8MM_VPUG1_SW_Pxx_REQ,
+ .map = IMX8MM_VPUG1_A53_DOMAIN,
+ },
+ .pgc = IMX8MM_PGC_VPUG1,
+ },
+
+ [IMX8MM_POWER_DOMAIN_VPUG2] = {
+ .genpd = {
+ .name = "vpu-g2",
+ },
+ .bits = {
+ .pxx = IMX8MM_VPUG2_SW_Pxx_REQ,
+ .map = IMX8MM_VPUG2_A53_DOMAIN,
+ },
+ .pgc = IMX8MM_PGC_VPUG2,
+ },
+
+ [IMX8MM_POWER_DOMAIN_VPUH1] = {
+ .genpd = {
+ .name = "vpu-h1",
+ },
+ .bits = {
+ .pxx = IMX8MM_VPUH1_SW_Pxx_REQ,
+ .map = IMX8MM_VPUH1_A53_DOMAIN,
+ },
+ .pgc = IMX8MM_PGC_VPUH1,
+ },
+
+ [IMX8MM_POWER_DOMAIN_DISPMIX] = {
+ .genpd = {
+ .name = "dispmix",
+ },
+ .bits = {
+ .pxx = IMX8MM_DISPMIX_SW_Pxx_REQ,
+ .map = IMX8MM_DISPMIX_A53_DOMAIN,
+ .hskreq = IMX8MM_DISPMIX_HSK_PWRDNREQN,
+ .hskack = IMX8MM_DISPMIX_HSK_PWRDNACKN,
+ },
+ .pgc = IMX8MM_PGC_DISPMIX,
+ },
+
+ [IMX8MM_POWER_DOMAIN_MIPI] = {
+ .genpd = {
+ .name = "mipi",
+ },
+ .bits = {
+ .pxx = IMX8MM_MIPI_SW_Pxx_REQ,
+ .map = IMX8MM_MIPI_A53_DOMAIN,
+ },
+ .pgc = IMX8MM_PGC_MIPI,
+ },
+};
+
+static const struct regmap_range imx8mm_yes_ranges[] = {
+ regmap_reg_range(GPC_LPCR_A_CORE_BSC,
+ GPC_PU_PWRHSK),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_MIPI),
+ GPC_PGC_SR(IMX8MM_PGC_MIPI)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_PCIE),
+ GPC_PGC_SR(IMX8MM_PGC_PCIE)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_OTG1),
+ GPC_PGC_SR(IMX8MM_PGC_OTG1)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_OTG2),
+ GPC_PGC_SR(IMX8MM_PGC_OTG2)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_DDR1),
+ GPC_PGC_SR(IMX8MM_PGC_DDR1)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_GPU2D),
+ GPC_PGC_SR(IMX8MM_PGC_GPU2D)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_GPUMIX),
+ GPC_PGC_SR(IMX8MM_PGC_GPUMIX)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_VPUMIX),
+ GPC_PGC_SR(IMX8MM_PGC_VPUMIX)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_GPU3D),
+ GPC_PGC_SR(IMX8MM_PGC_GPU3D)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_DISPMIX),
+ GPC_PGC_SR(IMX8MM_PGC_DISPMIX)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_VPUG1),
+ GPC_PGC_SR(IMX8MM_PGC_VPUG1)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_VPUG2),
+ GPC_PGC_SR(IMX8MM_PGC_VPUG2)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MM_PGC_VPUH1),
+ GPC_PGC_SR(IMX8MM_PGC_VPUH1)),
+};
+
+static const struct regmap_access_table imx8mm_access_table = {
+ .yes_ranges = imx8mm_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(imx8mm_yes_ranges),
+};
+
+static const struct imx_pgc_domain_data imx8mm_pgc_domain_data = {
+ .domains = imx8mm_pgc_domains,
+ .domains_num = ARRAY_SIZE(imx8mm_pgc_domains),
+ .reg_access_table = &imx8mm_access_table,
+};
+
+static const struct imx_pgc_domain imx8mn_pgc_domains[] = {
+ [IMX8MN_POWER_DOMAIN_HSIOMIX] = {
+ .genpd = {
+ .name = "hsiomix",
+ },
+ .bits = {
+ .pxx = 0, /* no power sequence control */
+ .map = 0, /* no power sequence control */
+ .hskreq = IMX8MN_HSIO_HSK_PWRDNREQN,
+ .hskack = IMX8MN_HSIO_HSK_PWRDNACKN,
+ },
+ },
+
+ [IMX8MN_POWER_DOMAIN_OTG1] = {
+ .genpd = {
+ .name = "usb-otg1",
+ },
+ .bits = {
+ .pxx = IMX8MN_OTG1_SW_Pxx_REQ,
+ .map = IMX8MN_OTG1_A53_DOMAIN,
+ },
+ .pgc = IMX8MN_PGC_OTG1,
+ },
+
+ [IMX8MN_POWER_DOMAIN_GPUMIX] = {
+ .genpd = {
+ .name = "gpumix",
+ },
+ .bits = {
+ .pxx = IMX8MN_GPUMIX_SW_Pxx_REQ,
+ .map = IMX8MN_GPUMIX_A53_DOMAIN,
+ .hskreq = IMX8MN_GPUMIX_HSK_PWRDNREQN,
+ .hskack = IMX8MN_GPUMIX_HSK_PWRDNACKN,
+ },
+ .pgc = IMX8MN_PGC_GPUMIX,
+ },
+};
+
+static const struct regmap_range imx8mn_yes_ranges[] = {
+ regmap_reg_range(GPC_LPCR_A_CORE_BSC,
+ GPC_PU_PWRHSK),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_MIPI),
+ GPC_PGC_SR(IMX8MN_PGC_MIPI)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_OTG1),
+ GPC_PGC_SR(IMX8MN_PGC_OTG1)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_DDR1),
+ GPC_PGC_SR(IMX8MN_PGC_DDR1)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_GPUMIX),
+ GPC_PGC_SR(IMX8MN_PGC_GPUMIX)),
+ regmap_reg_range(GPC_PGC_CTRL(IMX8MN_PGC_DISPMIX),
+ GPC_PGC_SR(IMX8MN_PGC_DISPMIX)),
+};
+
+static const struct regmap_access_table imx8mn_access_table = {
+ .yes_ranges = imx8mn_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(imx8mn_yes_ranges),
+};
+
+static const struct imx_pgc_domain_data imx8mn_pgc_domain_data = {
+ .domains = imx8mn_pgc_domains,
+ .domains_num = ARRAY_SIZE(imx8mn_pgc_domains),
+ .reg_access_table = &imx8mn_access_table,
+};
static int imx_pgc_domain_probe(struct platform_device *pdev)
{
@@ -495,25 +872,45 @@
domain->voltage, domain->voltage);
}
- ret = imx_pgc_get_clocks(domain);
- if (ret)
- return dev_err_probe(domain->dev, ret, "Failed to get domain's clocks\n");
+ domain->num_clks = devm_clk_bulk_get_all(domain->dev, &domain->clks);
+ if (domain->num_clks < 0)
+ return dev_err_probe(domain->dev, domain->num_clks,
+ "Failed to get domain's clocks\n");
+
+ domain->reset = devm_reset_control_array_get_optional_exclusive(domain->dev);
+ if (IS_ERR(domain->reset))
+ return dev_err_probe(domain->dev, PTR_ERR(domain->reset),
+ "Failed to get domain's resets\n");
+
+ pm_runtime_enable(domain->dev);
+
+ if (domain->bits.map)
+ regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+ domain->bits.map, domain->bits.map);
ret = pm_genpd_init(&domain->genpd, NULL, true);
if (ret) {
dev_err(domain->dev, "Failed to init power domain\n");
- imx_pgc_put_clocks(domain);
- return ret;
+ goto out_domain_unmap;
}
ret = of_genpd_add_provider_simple(domain->dev->of_node,
&domain->genpd);
if (ret) {
dev_err(domain->dev, "Failed to add genpd provider\n");
- pm_genpd_remove(&domain->genpd);
- imx_pgc_put_clocks(domain);
+ goto out_genpd_remove;
}
+ return 0;
+
+out_genpd_remove:
+ pm_genpd_remove(&domain->genpd);
+out_domain_unmap:
+ if (domain->bits.map)
+ regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+ domain->bits.map, 0);
+ pm_runtime_disable(domain->dev);
+
return ret;
}
@@ -523,7 +920,12 @@
of_genpd_del_provider(domain->dev->of_node);
pm_genpd_remove(&domain->genpd);
- imx_pgc_put_clocks(domain);
+
+ if (domain->bits.map)
+ regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
+ domain->bits.map, 0);
+
+ pm_runtime_disable(domain->dev);
return 0;
}
@@ -617,8 +1019,8 @@
domain = pd_pdev->dev.platform_data;
domain->regmap = regmap;
- domain->genpd.power_on = imx_gpc_pu_pgc_sw_pup_req;
- domain->genpd.power_off = imx_gpc_pu_pgc_sw_pdn_req;
+ domain->genpd.power_on = imx_pgc_power_up;
+ domain->genpd.power_off = imx_pgc_power_down;
pd_pdev->dev.parent = dev;
pd_pdev->dev.of_node = np;
@@ -636,6 +1038,8 @@
static const struct of_device_id imx_gpcv2_dt_ids[] = {
{ .compatible = "fsl,imx7d-gpc", .data = &imx7_pgc_domain_data, },
+ { .compatible = "fsl,imx8mm-gpc", .data = &imx8mm_pgc_domain_data, },
+ { .compatible = "fsl,imx8mn-gpc", .data = &imx8mn_pgc_domain_data, },
{ .compatible = "fsl,imx8mq-gpc", .data = &imx8m_pgc_domain_data, },
{ }
};
diff --git a/drivers/soc/imx/soc-imx.c b/drivers/soc/imx/soc-imx.c
index 0738c0f..ac6d856 100644
--- a/drivers/soc/imx/soc-imx.c
+++ b/drivers/soc/imx/soc-imx.c
@@ -70,6 +70,9 @@
case MXC_CPU_MX35:
soc_id = "i.MX35";
break;
+ case MXC_CPU_MX50:
+ soc_id = "i.MX50";
+ break;
case MXC_CPU_MX51:
ocotp_compat = "fsl,imx51-iim";
soc_id = "i.MX51";
diff --git a/drivers/soc/ixp4xx/ixp4xx-npe.c b/drivers/soc/ixp4xx/ixp4xx-npe.c
index 3c15825..7bd1935 100644
--- a/drivers/soc/ixp4xx/ixp4xx-npe.c
+++ b/drivers/soc/ixp4xx/ixp4xx-npe.c
@@ -21,6 +21,8 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/soc/ixp4xx/npe.h>
+#include <mach/hardware.h>
+#include <linux/soc/ixp4xx/cpu.h>
#define DEBUG_MSG 0
#define DEBUG_FW 0
diff --git a/drivers/soc/ixp4xx/ixp4xx-qmgr.c b/drivers/soc/ixp4xx/ixp4xx-qmgr.c
index 8c96838..7149510 100644
--- a/drivers/soc/ixp4xx/ixp4xx-qmgr.c
+++ b/drivers/soc/ixp4xx/ixp4xx-qmgr.c
@@ -12,6 +12,8 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/soc/ixp4xx/qmgr.h>
+#include <mach/hardware.h>
+#include <linux/soc/ixp4xx/cpu.h>
static struct qmgr_regs __iomem *qmgr_regs;
static int qmgr_irq_1;
diff --git a/drivers/soc/mediatek/mtk-devapc.c b/drivers/soc/mediatek/mtk-devapc.c
index f1cea04..7c65ad3 100644
--- a/drivers/soc/mediatek/mtk-devapc.c
+++ b/drivers/soc/mediatek/mtk-devapc.c
@@ -234,6 +234,7 @@
}, {
},
};
+MODULE_DEVICE_TABLE(of, mtk_devapc_dt_match);
static int mtk_devapc_probe(struct platform_device *pdev)
{
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 0af00ef..b762bc4 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -211,7 +211,7 @@
if (ret)
return ret;
- ret = clk_bulk_enable(pd->num_clks, pd->clks);
+ ret = clk_bulk_prepare_enable(pd->num_clks, pd->clks);
if (ret)
goto err_reg;
@@ -229,7 +229,7 @@
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
- ret = clk_bulk_enable(pd->num_subsys_clks, pd->subsys_clks);
+ ret = clk_bulk_prepare_enable(pd->num_subsys_clks, pd->subsys_clks);
if (ret)
goto err_pwr_ack;
@@ -246,9 +246,9 @@
err_disable_sram:
scpsys_sram_disable(pd);
err_disable_subsys_clks:
- clk_bulk_disable(pd->num_subsys_clks, pd->subsys_clks);
+ clk_bulk_disable_unprepare(pd->num_subsys_clks, pd->subsys_clks);
err_pwr_ack:
- clk_bulk_disable(pd->num_clks, pd->clks);
+ clk_bulk_disable_unprepare(pd->num_clks, pd->clks);
err_reg:
scpsys_regulator_disable(pd->supply);
return ret;
@@ -269,7 +269,7 @@
if (ret < 0)
return ret;
- clk_bulk_disable(pd->num_subsys_clks, pd->subsys_clks);
+ clk_bulk_disable_unprepare(pd->num_subsys_clks, pd->subsys_clks);
/* subsys power off */
regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
@@ -284,7 +284,7 @@
if (ret < 0)
return ret;
- clk_bulk_disable(pd->num_clks, pd->clks);
+ clk_bulk_disable_unprepare(pd->num_clks, pd->clks);
scpsys_regulator_disable(pd->supply);
@@ -297,6 +297,7 @@
const struct scpsys_domain_data *domain_data;
struct scpsys_domain *pd;
struct device_node *root_node = scpsys->dev->of_node;
+ struct device_node *smi_node;
struct property *prop;
const char *clk_name;
int i, ret, num_clks;
@@ -352,9 +353,13 @@
if (IS_ERR(pd->infracfg))
return ERR_CAST(pd->infracfg);
- pd->smi = syscon_regmap_lookup_by_phandle_optional(node, "mediatek,smi");
- if (IS_ERR(pd->smi))
- return ERR_CAST(pd->smi);
+ smi_node = of_parse_phandle(node, "mediatek,smi", 0);
+ if (smi_node) {
+ pd->smi = device_node_to_regmap(smi_node);
+ of_node_put(smi_node);
+ if (IS_ERR(pd->smi))
+ return ERR_CAST(pd->smi);
+ }
num_clks = of_clk_get_parent_count(node);
if (num_clks > 0) {
@@ -405,14 +410,6 @@
pd->subsys_clks[i].clk = clk;
}
- ret = clk_bulk_prepare(pd->num_clks, pd->clks);
- if (ret)
- goto err_put_subsys_clocks;
-
- ret = clk_bulk_prepare(pd->num_subsys_clks, pd->subsys_clks);
- if (ret)
- goto err_unprepare_clocks;
-
/*
* Initially turn on all domains to make the domains usable
* with !CONFIG_PM and to get the hardware in sync with the
@@ -427,7 +424,7 @@
ret = scpsys_power_on(&pd->genpd);
if (ret < 0) {
dev_err(scpsys->dev, "%pOF: failed to power on domain: %d\n", node, ret);
- goto err_unprepare_clocks;
+ goto err_put_subsys_clocks;
}
}
@@ -435,7 +432,7 @@
ret = -EINVAL;
dev_err(scpsys->dev,
"power domain with id %d already exists, check your device-tree\n", id);
- goto err_unprepare_subsys_clocks;
+ goto err_put_subsys_clocks;
}
if (!pd->data->name)
@@ -455,10 +452,6 @@
return scpsys->pd_data.domains[id];
-err_unprepare_subsys_clocks:
- clk_bulk_unprepare(pd->num_subsys_clks, pd->subsys_clks);
-err_unprepare_clocks:
- clk_bulk_unprepare(pd->num_clks, pd->clks);
err_put_subsys_clocks:
clk_bulk_put(pd->num_subsys_clks, pd->subsys_clks);
err_put_clocks:
@@ -537,10 +530,7 @@
"failed to remove domain '%s' : %d - state may be inconsistent\n",
pd->genpd.name, ret);
- clk_bulk_unprepare(pd->num_clks, pd->clks);
clk_bulk_put(pd->num_clks, pd->clks);
-
- clk_bulk_unprepare(pd->num_subsys_clks, pd->subsys_clks);
clk_bulk_put(pd->num_subsys_clks, pd->subsys_clks);
}
diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
index e4de75f..952bc55 100644
--- a/drivers/soc/mediatek/mtk-pmic-wrap.c
+++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
@@ -961,6 +961,23 @@
[PWRAP_WACS2_VLDCLR] = 0xC28,
};
+static int mt8195_regs[] = {
+ [PWRAP_INIT_DONE2] = 0x0,
+ [PWRAP_STAUPD_CTRL] = 0x4C,
+ [PWRAP_TIMER_EN] = 0x3E4,
+ [PWRAP_INT_EN] = 0x420,
+ [PWRAP_INT_FLG] = 0x428,
+ [PWRAP_INT_CLR] = 0x42C,
+ [PWRAP_INT1_EN] = 0x450,
+ [PWRAP_INT1_FLG] = 0x458,
+ [PWRAP_INT1_CLR] = 0x45C,
+ [PWRAP_WACS2_CMD] = 0x880,
+ [PWRAP_SWINF_2_WDATA_31_0] = 0x884,
+ [PWRAP_SWINF_2_RDATA_31_0] = 0x894,
+ [PWRAP_WACS2_VLDCLR] = 0x8A4,
+ [PWRAP_WACS2_RDATA] = 0x8A8,
+};
+
static int mt8516_regs[] = {
[PWRAP_MUX_SEL] = 0x0,
[PWRAP_WRAP_EN] = 0x4,
@@ -1066,6 +1083,7 @@
PWRAP_MT8135,
PWRAP_MT8173,
PWRAP_MT8183,
+ PWRAP_MT8195,
PWRAP_MT8516,
};
@@ -1525,6 +1543,7 @@
break;
case PWRAP_MT6873:
case PWRAP_MT8183:
+ case PWRAP_MT8195:
break;
}
@@ -2025,6 +2044,19 @@
.init_soc_specific = pwrap_mt8183_init_soc_specific,
};
+static struct pmic_wrapper_type pwrap_mt8195 = {
+ .regs = mt8195_regs,
+ .type = PWRAP_MT8195,
+ .arb_en_all = 0x777f, /* NEED CONFIRM */
+ .int_en_all = 0x180000, /* NEED CONFIRM */
+ .int1_en_all = 0,
+ .spi_w = PWRAP_MAN_CMD_SPI_WRITE,
+ .wdt_src = PWRAP_WDT_SRC_MASK_ALL,
+ .caps = PWRAP_CAP_INT1_EN | PWRAP_CAP_ARB,
+ .init_reg_clock = pwrap_common_init_reg_clock,
+ .init_soc_specific = NULL,
+};
+
static struct pmic_wrapper_type pwrap_mt8516 = {
.regs = mt8516_regs,
.type = PWRAP_MT8516,
@@ -2066,6 +2098,9 @@
.compatible = "mediatek,mt8183-pwrap",
.data = &pwrap_mt8183,
}, {
+ .compatible = "mediatek,mt8195-pwrap",
+ .data = &pwrap_mt8195,
+ }, {
.compatible = "mediatek,mt8516-pwrap",
.data = &pwrap_mt8516,
}, {
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index bb21c4f..2daa17b 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -271,9 +271,30 @@
.num_pds = ARRAY_SIZE(sc7280_rpmhpds),
};
+/* SC8180x RPMH powerdomains */
+static struct rpmhpd *sc8180x_rpmhpds[] = {
+ [SC8180X_CX] = &sdm845_cx,
+ [SC8180X_CX_AO] = &sdm845_cx_ao,
+ [SC8180X_EBI] = &sdm845_ebi,
+ [SC8180X_GFX] = &sdm845_gfx,
+ [SC8180X_LCX] = &sdm845_lcx,
+ [SC8180X_LMX] = &sdm845_lmx,
+ [SC8180X_MMCX] = &sm8150_mmcx,
+ [SC8180X_MMCX_AO] = &sm8150_mmcx_ao,
+ [SC8180X_MSS] = &sdm845_mss,
+ [SC8180X_MX] = &sdm845_mx,
+ [SC8180X_MX_AO] = &sdm845_mx_ao,
+};
+
+static const struct rpmhpd_desc sc8180x_desc = {
+ .rpmhpds = sc8180x_rpmhpds,
+ .num_pds = ARRAY_SIZE(sc8180x_rpmhpds),
+};
+
static const struct of_device_id rpmhpd_match_table[] = {
{ .compatible = "qcom,sc7180-rpmhpd", .data = &sc7180_desc },
{ .compatible = "qcom,sc7280-rpmhpd", .data = &sc7280_desc },
+ { .compatible = "qcom,sc8180x-rpmhpd", .data = &sc8180x_desc },
{ .compatible = "qcom,sdm845-rpmhpd", .data = &sdm845_desc },
{ .compatible = "qcom,sdx55-rpmhpd", .data = &sdx55_desc},
{ .compatible = "qcom,sm8150-rpmhpd", .data = &sm8150_desc },
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index 27733b0..0b532a8 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -118,6 +118,27 @@
static DEFINE_MUTEX(rpmpd_lock);
+/* mdm9607 RPM Power Domains */
+DEFINE_RPMPD_PAIR(mdm9607, vddcx, vddcx_ao, SMPA, LEVEL, 3);
+DEFINE_RPMPD_VFL(mdm9607, vddcx_vfl, SMPA, 3);
+
+DEFINE_RPMPD_PAIR(mdm9607, vddmx, vddmx_ao, LDOA, LEVEL, 12);
+DEFINE_RPMPD_VFL(mdm9607, vddmx_vfl, LDOA, 12);
+static struct rpmpd *mdm9607_rpmpds[] = {
+ [MDM9607_VDDCX] = &mdm9607_vddcx,
+ [MDM9607_VDDCX_AO] = &mdm9607_vddcx_ao,
+ [MDM9607_VDDCX_VFL] = &mdm9607_vddcx_vfl,
+ [MDM9607_VDDMX] = &mdm9607_vddmx,
+ [MDM9607_VDDMX_AO] = &mdm9607_vddmx_ao,
+ [MDM9607_VDDMX_VFL] = &mdm9607_vddmx_vfl,
+};
+
+static const struct rpmpd_desc mdm9607_desc = {
+ .rpmpds = mdm9607_rpmpds,
+ .num_pds = ARRAY_SIZE(mdm9607_rpmpds),
+ .max_state = RPM_SMD_LEVEL_TURBO,
+};
+
/* msm8939 RPM Power Domains */
DEFINE_RPMPD_PAIR(msm8939, vddmd, vddmd_ao, SMPA, CORNER, 1);
DEFINE_RPMPD_VFC(msm8939, vddmd_vfc, SMPA, 1);
@@ -326,6 +347,7 @@
};
static const struct of_device_id rpmpd_match_table[] = {
+ { .compatible = "qcom,mdm9607-rpmpd", .data = &mdm9607_desc },
{ .compatible = "qcom,msm8916-rpmpd", .data = &msm8916_desc },
{ .compatible = "qcom,msm8939-rpmpd", .data = &msm8939_desc },
{ .compatible = "qcom,msm8976-rpmpd", .data = &msm8976_desc },
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index b93218c..bc0be1d4 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -233,6 +233,7 @@
static const struct of_device_id qcom_smd_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8084" },
{ .compatible = "qcom,rpm-ipq6018" },
+ { .compatible = "qcom,rpm-msm8226" },
{ .compatible = "qcom,rpm-msm8916" },
{ .compatible = "qcom,rpm-msm8936" },
{ .compatible = "qcom,rpm-msm8974" },
@@ -241,6 +242,7 @@
{ .compatible = "qcom,rpm-msm8996" },
{ .compatible = "qcom,rpm-msm8998" },
{ .compatible = "qcom,rpm-sdm660" },
+ { .compatible = "qcom,rpm-sm6125" },
{ .compatible = "qcom,rpm-qcs404" },
{}
};
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index f6cfb79..b2f049f 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -70,21 +70,33 @@
static const char *const pmic_models[] = {
[0] = "Unknown PMIC model",
+ [1] = "PM8941",
+ [2] = "PM8841",
+ [3] = "PM8019",
+ [4] = "PM8226",
+ [5] = "PM8110",
+ [6] = "PMA8084",
+ [7] = "PMI8962",
+ [8] = "PMD9635",
[9] = "PM8994",
+ [10] = "PMI8994",
[11] = "PM8916",
- [13] = "PM8058",
+ [12] = "PM8004",
+ [13] = "PM8909/PM8058",
[14] = "PM8028",
[15] = "PM8901",
- [16] = "PM8027",
- [17] = "ISL9519",
+ [16] = "PM8950/PM8027",
+ [17] = "PMI8950/ISL9519",
[18] = "PM8921",
[19] = "PM8018",
- [20] = "PM8015",
- [21] = "PM8014",
+ [20] = "PM8998/PM8015",
+ [21] = "PMI8998/PM8014",
[22] = "PM8821",
[23] = "PM8038",
- [24] = "PM8922",
+ [24] = "PM8005/PM8922",
[25] = "PM8917",
+ [26] = "PM660L",
+ [27] = "PM660",
[30] = "PM8150",
[31] = "PM8150L",
[32] = "PM8150B",
@@ -195,11 +207,30 @@
{ 139, "APQ8060AB" },
{ 140, "MSM8260AB" },
{ 141, "MSM8660AB" },
+ { 145, "MSM8626" },
+ { 147, "MSM8610" },
+ { 153, "APQ8064AB" },
+ { 158, "MSM8226" },
+ { 159, "MSM8526" },
+ { 161, "MSM8110" },
+ { 162, "MSM8210" },
+ { 163, "MSM8810" },
+ { 164, "MSM8212" },
+ { 165, "MSM8612" },
+ { 166, "MSM8112" },
+ { 168, "MSM8225Q" },
+ { 169, "MSM8625Q" },
+ { 170, "MSM8125Q" },
+ { 172, "APQ8064AA" },
{ 178, "APQ8084" },
{ 184, "APQ8074" },
{ 185, "MSM8274" },
{ 186, "MSM8674" },
{ 194, "MSM8974PRO" },
+ { 198, "MSM8126" },
+ { 199, "APQ8026" },
+ { 200, "MSM8926" },
+ { 205, "MSM8326" },
{ 206, "MSM8916" },
{ 207, "MSM8994" },
{ 208, "APQ8074-AA" },
@@ -213,6 +244,14 @@
{ 216, "MSM8674PRO" },
{ 217, "MSM8974-AA" },
{ 218, "MSM8974-AB" },
+ { 219, "APQ8028" },
+ { 220, "MSM8128" },
+ { 221, "MSM8228" },
+ { 222, "MSM8528" },
+ { 223, "MSM8628" },
+ { 224, "MSM8928" },
+ { 225, "MSM8510" },
+ { 226, "MSM8512" },
{ 233, "MSM8936" },
{ 239, "MSM8939" },
{ 240, "APQ8036" },
@@ -254,8 +293,13 @@
{ 350, "SDA632" },
{ 351, "SDA450" },
{ 356, "SM8250" },
+ { 394, "SM6125" },
{ 402, "IPQ6018" },
+ { 403, "IPQ6028" },
+ { 421, "IPQ6000" },
+ { 422, "IPQ6010" },
{ 425, "SC7180" },
+ { 453, "IPQ6005" },
{ 455, "QRB5165" },
};
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index b70bbc3..71b44c3 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -279,6 +279,11 @@
help
This enables support for the Renesas RZ/G2N SoC.
+config ARCH_R9A07G044
+ bool "ARM64 Platform support for RZ/G2L"
+ help
+ This enables support for the Renesas RZ/G2L SoC variants.
+
endif # ARM64
config RST_RCAR
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 0f8eff4..8310fce 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -56,6 +56,10 @@
.reg = 0xfff00044, /* PRR (Product Register) */
};
+static const struct renesas_family fam_rzg2l __initconst __maybe_unused = {
+ .name = "RZ/G2L",
+};
+
static const struct renesas_family fam_shmobile __initconst __maybe_unused = {
.name = "SH-Mobile",
.reg = 0xe600101c, /* CCCR (Common Chip Code Register) */
@@ -64,7 +68,7 @@
struct renesas_soc {
const struct renesas_family *family;
- u8 id;
+ u32 id;
};
static const struct renesas_soc soc_rz_a1h __initconst __maybe_unused = {
@@ -131,6 +135,11 @@
.id = 0x4f,
};
+static const struct renesas_soc soc_rz_g2l __initconst __maybe_unused = {
+ .family = &fam_rzg2l,
+ .id = 0x841c447,
+};
+
static const struct renesas_soc soc_rcar_m1a __initconst __maybe_unused = {
.family = &fam_rcar_gen1,
};
@@ -299,6 +308,9 @@
#ifdef CONFIG_ARCH_R8A779A0
{ .compatible = "renesas,r8a779a0", .data = &soc_rcar_v3u },
#endif
+#if defined(CONFIG_ARCH_R9A07G044)
+ { .compatible = "renesas,r9a07g044", .data = &soc_rz_g2l },
+#endif
#ifdef CONFIG_ARCH_SH73A0
{ .compatible = "renesas,sh73a0", .data = &soc_shmobile_ag5 },
#endif
@@ -348,6 +360,25 @@
goto done;
}
+ np = of_find_compatible_node(NULL, NULL, "renesas,r9a07g044-sysc");
+ if (np) {
+ chipid = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (chipid) {
+ product = readl(chipid + 0x0a04);
+ iounmap(chipid);
+
+ if (soc->id && (product & 0xfffffff) != soc->id) {
+ pr_warn("SoC mismatch (product = 0x%x)\n",
+ product);
+ return -ENODEV;
+ }
+ }
+
+ goto done;
+ }
+
/* Try PRR first, then hardcoded fallback */
np = of_find_compatible_node(NULL, NULL, "renesas,prr");
if (np) {
diff --git a/drivers/soc/rockchip/pm_domains.c b/drivers/soc/rockchip/pm_domains.c
index 54eb6cf..0868b7d 100644
--- a/drivers/soc/rockchip/pm_domains.c
+++ b/drivers/soc/rockchip/pm_domains.c
@@ -27,8 +27,10 @@
#include <dt-bindings/power/rk3366-power.h>
#include <dt-bindings/power/rk3368-power.h>
#include <dt-bindings/power/rk3399-power.h>
+#include <dt-bindings/power/rk3568-power.h>
struct rockchip_domain_info {
+ const char *name;
int pwr_mask;
int status_mask;
int req_mask;
@@ -85,8 +87,9 @@
#define to_rockchip_pd(gpd) container_of(gpd, struct rockchip_pm_domain, genpd)
-#define DOMAIN(pwr, status, req, idle, ack, wakeup) \
+#define DOMAIN(_name, pwr, status, req, idle, ack, wakeup) \
{ \
+ .name = _name, \
.pwr_mask = (pwr), \
.status_mask = (status), \
.req_mask = (req), \
@@ -95,8 +98,9 @@
.active_wakeup = (wakeup), \
}
-#define DOMAIN_M(pwr, status, req, idle, ack, wakeup) \
+#define DOMAIN_M(_name, pwr, status, req, idle, ack, wakeup) \
{ \
+ .name = _name, \
.pwr_w_mask = (pwr) << 16, \
.pwr_mask = (pwr), \
.status_mask = (status), \
@@ -107,8 +111,9 @@
.active_wakeup = wakeup, \
}
-#define DOMAIN_RK3036(req, ack, idle, wakeup) \
+#define DOMAIN_RK3036(_name, req, ack, idle, wakeup) \
{ \
+ .name = _name, \
.req_mask = (req), \
.req_w_mask = (req) << 16, \
.ack_mask = (ack), \
@@ -116,20 +121,23 @@
.active_wakeup = wakeup, \
}
-#define DOMAIN_PX30(pwr, status, req, wakeup) \
- DOMAIN_M(pwr, status, req, (req) << 16, req, wakeup)
+#define DOMAIN_PX30(name, pwr, status, req, wakeup) \
+ DOMAIN_M(name, pwr, status, req, (req) << 16, req, wakeup)
-#define DOMAIN_RK3288(pwr, status, req, wakeup) \
- DOMAIN(pwr, status, req, req, (req) << 16, wakeup)
+#define DOMAIN_RK3288(name, pwr, status, req, wakeup) \
+ DOMAIN(name, pwr, status, req, req, (req) << 16, wakeup)
-#define DOMAIN_RK3328(pwr, status, req, wakeup) \
- DOMAIN_M(pwr, pwr, req, (req) << 10, req, wakeup)
+#define DOMAIN_RK3328(name, pwr, status, req, wakeup) \
+ DOMAIN_M(name, pwr, pwr, req, (req) << 10, req, wakeup)
-#define DOMAIN_RK3368(pwr, status, req, wakeup) \
- DOMAIN(pwr, status, req, (req) << 16, req, wakeup)
+#define DOMAIN_RK3368(name, pwr, status, req, wakeup) \
+ DOMAIN(name, pwr, status, req, (req) << 16, req, wakeup)
-#define DOMAIN_RK3399(pwr, status, req, wakeup) \
- DOMAIN(pwr, status, req, req, req, wakeup)
+#define DOMAIN_RK3399(name, pwr, status, req, wakeup) \
+ DOMAIN(name, pwr, status, req, req, req, wakeup)
+
+#define DOMAIN_RK3568(name, pwr, req, wakeup) \
+ DOMAIN_M(name, pwr, pwr, req, req, req, wakeup)
static bool rockchip_pmu_domain_is_idle(struct rockchip_pm_domain *pd)
{
@@ -490,7 +498,10 @@
goto err_unprepare_clocks;
}
- pd->genpd.name = node->name;
+ if (pd->info->name)
+ pd->genpd.name = pd->info->name;
+ else
+ pd->genpd.name = kbasename(node->full_name);
pd->genpd.power_off = rockchip_pd_power_off;
pd->genpd.power_on = rockchip_pd_power_on;
pd->genpd.attach_dev = rockchip_pd_attach_dev;
@@ -716,129 +727,141 @@
}
static const struct rockchip_domain_info px30_pm_domains[] = {
- [PX30_PD_USB] = DOMAIN_PX30(BIT(5), BIT(5), BIT(10), false),
- [PX30_PD_SDCARD] = DOMAIN_PX30(BIT(8), BIT(8), BIT(9), false),
- [PX30_PD_GMAC] = DOMAIN_PX30(BIT(10), BIT(10), BIT(6), false),
- [PX30_PD_MMC_NAND] = DOMAIN_PX30(BIT(11), BIT(11), BIT(5), false),
- [PX30_PD_VPU] = DOMAIN_PX30(BIT(12), BIT(12), BIT(14), false),
- [PX30_PD_VO] = DOMAIN_PX30(BIT(13), BIT(13), BIT(7), false),
- [PX30_PD_VI] = DOMAIN_PX30(BIT(14), BIT(14), BIT(8), false),
- [PX30_PD_GPU] = DOMAIN_PX30(BIT(15), BIT(15), BIT(2), false),
+ [PX30_PD_USB] = DOMAIN_PX30("usb", BIT(5), BIT(5), BIT(10), false),
+ [PX30_PD_SDCARD] = DOMAIN_PX30("sdcard", BIT(8), BIT(8), BIT(9), false),
+ [PX30_PD_GMAC] = DOMAIN_PX30("gmac", BIT(10), BIT(10), BIT(6), false),
+ [PX30_PD_MMC_NAND] = DOMAIN_PX30("mmc_nand", BIT(11), BIT(11), BIT(5), false),
+ [PX30_PD_VPU] = DOMAIN_PX30("vpu", BIT(12), BIT(12), BIT(14), false),
+ [PX30_PD_VO] = DOMAIN_PX30("vo", BIT(13), BIT(13), BIT(7), false),
+ [PX30_PD_VI] = DOMAIN_PX30("vi", BIT(14), BIT(14), BIT(8), false),
+ [PX30_PD_GPU] = DOMAIN_PX30("gpu", BIT(15), BIT(15), BIT(2), false),
};
static const struct rockchip_domain_info rk3036_pm_domains[] = {
- [RK3036_PD_MSCH] = DOMAIN_RK3036(BIT(14), BIT(23), BIT(30), true),
- [RK3036_PD_CORE] = DOMAIN_RK3036(BIT(13), BIT(17), BIT(24), false),
- [RK3036_PD_PERI] = DOMAIN_RK3036(BIT(12), BIT(18), BIT(25), false),
- [RK3036_PD_VIO] = DOMAIN_RK3036(BIT(11), BIT(19), BIT(26), false),
- [RK3036_PD_VPU] = DOMAIN_RK3036(BIT(10), BIT(20), BIT(27), false),
- [RK3036_PD_GPU] = DOMAIN_RK3036(BIT(9), BIT(21), BIT(28), false),
- [RK3036_PD_SYS] = DOMAIN_RK3036(BIT(8), BIT(22), BIT(29), false),
+ [RK3036_PD_MSCH] = DOMAIN_RK3036("msch", BIT(14), BIT(23), BIT(30), true),
+ [RK3036_PD_CORE] = DOMAIN_RK3036("core", BIT(13), BIT(17), BIT(24), false),
+ [RK3036_PD_PERI] = DOMAIN_RK3036("peri", BIT(12), BIT(18), BIT(25), false),
+ [RK3036_PD_VIO] = DOMAIN_RK3036("vio", BIT(11), BIT(19), BIT(26), false),
+ [RK3036_PD_VPU] = DOMAIN_RK3036("vpu", BIT(10), BIT(20), BIT(27), false),
+ [RK3036_PD_GPU] = DOMAIN_RK3036("gpu", BIT(9), BIT(21), BIT(28), false),
+ [RK3036_PD_SYS] = DOMAIN_RK3036("sys", BIT(8), BIT(22), BIT(29), false),
};
static const struct rockchip_domain_info rk3066_pm_domains[] = {
- [RK3066_PD_GPU] = DOMAIN(BIT(9), BIT(9), BIT(3), BIT(24), BIT(29), false),
- [RK3066_PD_VIDEO] = DOMAIN(BIT(8), BIT(8), BIT(4), BIT(23), BIT(28), false),
- [RK3066_PD_VIO] = DOMAIN(BIT(7), BIT(7), BIT(5), BIT(22), BIT(27), false),
- [RK3066_PD_PERI] = DOMAIN(BIT(6), BIT(6), BIT(2), BIT(25), BIT(30), false),
- [RK3066_PD_CPU] = DOMAIN(0, BIT(5), BIT(1), BIT(26), BIT(31), false),
+ [RK3066_PD_GPU] = DOMAIN("gpu", BIT(9), BIT(9), BIT(3), BIT(24), BIT(29), false),
+ [RK3066_PD_VIDEO] = DOMAIN("video", BIT(8), BIT(8), BIT(4), BIT(23), BIT(28), false),
+ [RK3066_PD_VIO] = DOMAIN("vio", BIT(7), BIT(7), BIT(5), BIT(22), BIT(27), false),
+ [RK3066_PD_PERI] = DOMAIN("peri", BIT(6), BIT(6), BIT(2), BIT(25), BIT(30), false),
+ [RK3066_PD_CPU] = DOMAIN("cpu", 0, BIT(5), BIT(1), BIT(26), BIT(31), false),
};
static const struct rockchip_domain_info rk3128_pm_domains[] = {
- [RK3128_PD_CORE] = DOMAIN_RK3288(BIT(0), BIT(0), BIT(4), false),
- [RK3128_PD_MSCH] = DOMAIN_RK3288(0, 0, BIT(6), true),
- [RK3128_PD_VIO] = DOMAIN_RK3288(BIT(3), BIT(3), BIT(2), false),
- [RK3128_PD_VIDEO] = DOMAIN_RK3288(BIT(2), BIT(2), BIT(1), false),
- [RK3128_PD_GPU] = DOMAIN_RK3288(BIT(1), BIT(1), BIT(3), false),
+ [RK3128_PD_CORE] = DOMAIN_RK3288("core", BIT(0), BIT(0), BIT(4), false),
+ [RK3128_PD_MSCH] = DOMAIN_RK3288("msch", 0, 0, BIT(6), true),
+ [RK3128_PD_VIO] = DOMAIN_RK3288("vio", BIT(3), BIT(3), BIT(2), false),
+ [RK3128_PD_VIDEO] = DOMAIN_RK3288("video", BIT(2), BIT(2), BIT(1), false),
+ [RK3128_PD_GPU] = DOMAIN_RK3288("gpu", BIT(1), BIT(1), BIT(3), false),
};
static const struct rockchip_domain_info rk3188_pm_domains[] = {
- [RK3188_PD_GPU] = DOMAIN(BIT(9), BIT(9), BIT(3), BIT(24), BIT(29), false),
- [RK3188_PD_VIDEO] = DOMAIN(BIT(8), BIT(8), BIT(4), BIT(23), BIT(28), false),
- [RK3188_PD_VIO] = DOMAIN(BIT(7), BIT(7), BIT(5), BIT(22), BIT(27), false),
- [RK3188_PD_PERI] = DOMAIN(BIT(6), BIT(6), BIT(2), BIT(25), BIT(30), false),
- [RK3188_PD_CPU] = DOMAIN(BIT(5), BIT(5), BIT(1), BIT(26), BIT(31), false),
+ [RK3188_PD_GPU] = DOMAIN("gpu", BIT(9), BIT(9), BIT(3), BIT(24), BIT(29), false),
+ [RK3188_PD_VIDEO] = DOMAIN("video", BIT(8), BIT(8), BIT(4), BIT(23), BIT(28), false),
+ [RK3188_PD_VIO] = DOMAIN("vio", BIT(7), BIT(7), BIT(5), BIT(22), BIT(27), false),
+ [RK3188_PD_PERI] = DOMAIN("peri", BIT(6), BIT(6), BIT(2), BIT(25), BIT(30), false),
+ [RK3188_PD_CPU] = DOMAIN("cpu", BIT(5), BIT(5), BIT(1), BIT(26), BIT(31), false),
};
static const struct rockchip_domain_info rk3228_pm_domains[] = {
- [RK3228_PD_CORE] = DOMAIN_RK3036(BIT(0), BIT(0), BIT(16), true),
- [RK3228_PD_MSCH] = DOMAIN_RK3036(BIT(1), BIT(1), BIT(17), true),
- [RK3228_PD_BUS] = DOMAIN_RK3036(BIT(2), BIT(2), BIT(18), true),
- [RK3228_PD_SYS] = DOMAIN_RK3036(BIT(3), BIT(3), BIT(19), true),
- [RK3228_PD_VIO] = DOMAIN_RK3036(BIT(4), BIT(4), BIT(20), false),
- [RK3228_PD_VOP] = DOMAIN_RK3036(BIT(5), BIT(5), BIT(21), false),
- [RK3228_PD_VPU] = DOMAIN_RK3036(BIT(6), BIT(6), BIT(22), false),
- [RK3228_PD_RKVDEC] = DOMAIN_RK3036(BIT(7), BIT(7), BIT(23), false),
- [RK3228_PD_GPU] = DOMAIN_RK3036(BIT(8), BIT(8), BIT(24), false),
- [RK3228_PD_PERI] = DOMAIN_RK3036(BIT(9), BIT(9), BIT(25), true),
- [RK3228_PD_GMAC] = DOMAIN_RK3036(BIT(10), BIT(10), BIT(26), false),
+ [RK3228_PD_CORE] = DOMAIN_RK3036("core", BIT(0), BIT(0), BIT(16), true),
+ [RK3228_PD_MSCH] = DOMAIN_RK3036("msch", BIT(1), BIT(1), BIT(17), true),
+ [RK3228_PD_BUS] = DOMAIN_RK3036("bus", BIT(2), BIT(2), BIT(18), true),
+ [RK3228_PD_SYS] = DOMAIN_RK3036("sys", BIT(3), BIT(3), BIT(19), true),
+ [RK3228_PD_VIO] = DOMAIN_RK3036("vio", BIT(4), BIT(4), BIT(20), false),
+ [RK3228_PD_VOP] = DOMAIN_RK3036("vop", BIT(5), BIT(5), BIT(21), false),
+ [RK3228_PD_VPU] = DOMAIN_RK3036("vpu", BIT(6), BIT(6), BIT(22), false),
+ [RK3228_PD_RKVDEC] = DOMAIN_RK3036("vdec", BIT(7), BIT(7), BIT(23), false),
+ [RK3228_PD_GPU] = DOMAIN_RK3036("gpu", BIT(8), BIT(8), BIT(24), false),
+ [RK3228_PD_PERI] = DOMAIN_RK3036("peri", BIT(9), BIT(9), BIT(25), true),
+ [RK3228_PD_GMAC] = DOMAIN_RK3036("gmac", BIT(10), BIT(10), BIT(26), false),
};
static const struct rockchip_domain_info rk3288_pm_domains[] = {
- [RK3288_PD_VIO] = DOMAIN_RK3288(BIT(7), BIT(7), BIT(4), false),
- [RK3288_PD_HEVC] = DOMAIN_RK3288(BIT(14), BIT(10), BIT(9), false),
- [RK3288_PD_VIDEO] = DOMAIN_RK3288(BIT(8), BIT(8), BIT(3), false),
- [RK3288_PD_GPU] = DOMAIN_RK3288(BIT(9), BIT(9), BIT(2), false),
+ [RK3288_PD_VIO] = DOMAIN_RK3288("vio", BIT(7), BIT(7), BIT(4), false),
+ [RK3288_PD_HEVC] = DOMAIN_RK3288("hevc", BIT(14), BIT(10), BIT(9), false),
+ [RK3288_PD_VIDEO] = DOMAIN_RK3288("video", BIT(8), BIT(8), BIT(3), false),
+ [RK3288_PD_GPU] = DOMAIN_RK3288("gpu", BIT(9), BIT(9), BIT(2), false),
};
static const struct rockchip_domain_info rk3328_pm_domains[] = {
- [RK3328_PD_CORE] = DOMAIN_RK3328(0, BIT(0), BIT(0), false),
- [RK3328_PD_GPU] = DOMAIN_RK3328(0, BIT(1), BIT(1), false),
- [RK3328_PD_BUS] = DOMAIN_RK3328(0, BIT(2), BIT(2), true),
- [RK3328_PD_MSCH] = DOMAIN_RK3328(0, BIT(3), BIT(3), true),
- [RK3328_PD_PERI] = DOMAIN_RK3328(0, BIT(4), BIT(4), true),
- [RK3328_PD_VIDEO] = DOMAIN_RK3328(0, BIT(5), BIT(5), false),
- [RK3328_PD_HEVC] = DOMAIN_RK3328(0, BIT(6), BIT(6), false),
- [RK3328_PD_VIO] = DOMAIN_RK3328(0, BIT(8), BIT(8), false),
- [RK3328_PD_VPU] = DOMAIN_RK3328(0, BIT(9), BIT(9), false),
+ [RK3328_PD_CORE] = DOMAIN_RK3328("core", 0, BIT(0), BIT(0), false),
+ [RK3328_PD_GPU] = DOMAIN_RK3328("gpu", 0, BIT(1), BIT(1), false),
+ [RK3328_PD_BUS] = DOMAIN_RK3328("bus", 0, BIT(2), BIT(2), true),
+ [RK3328_PD_MSCH] = DOMAIN_RK3328("msch", 0, BIT(3), BIT(3), true),
+ [RK3328_PD_PERI] = DOMAIN_RK3328("peri", 0, BIT(4), BIT(4), true),
+ [RK3328_PD_VIDEO] = DOMAIN_RK3328("video", 0, BIT(5), BIT(5), false),
+ [RK3328_PD_HEVC] = DOMAIN_RK3328("hevc", 0, BIT(6), BIT(6), false),
+ [RK3328_PD_VIO] = DOMAIN_RK3328("vio", 0, BIT(8), BIT(8), false),
+ [RK3328_PD_VPU] = DOMAIN_RK3328("vpu", 0, BIT(9), BIT(9), false),
};
static const struct rockchip_domain_info rk3366_pm_domains[] = {
- [RK3366_PD_PERI] = DOMAIN_RK3368(BIT(10), BIT(10), BIT(6), true),
- [RK3366_PD_VIO] = DOMAIN_RK3368(BIT(14), BIT(14), BIT(8), false),
- [RK3366_PD_VIDEO] = DOMAIN_RK3368(BIT(13), BIT(13), BIT(7), false),
- [RK3366_PD_RKVDEC] = DOMAIN_RK3368(BIT(11), BIT(11), BIT(7), false),
- [RK3366_PD_WIFIBT] = DOMAIN_RK3368(BIT(8), BIT(8), BIT(9), false),
- [RK3366_PD_VPU] = DOMAIN_RK3368(BIT(12), BIT(12), BIT(7), false),
- [RK3366_PD_GPU] = DOMAIN_RK3368(BIT(15), BIT(15), BIT(2), false),
+ [RK3366_PD_PERI] = DOMAIN_RK3368("peri", BIT(10), BIT(10), BIT(6), true),
+ [RK3366_PD_VIO] = DOMAIN_RK3368("vio", BIT(14), BIT(14), BIT(8), false),
+ [RK3366_PD_VIDEO] = DOMAIN_RK3368("video", BIT(13), BIT(13), BIT(7), false),
+ [RK3366_PD_RKVDEC] = DOMAIN_RK3368("vdec", BIT(11), BIT(11), BIT(7), false),
+ [RK3366_PD_WIFIBT] = DOMAIN_RK3368("wifibt", BIT(8), BIT(8), BIT(9), false),
+ [RK3366_PD_VPU] = DOMAIN_RK3368("vpu", BIT(12), BIT(12), BIT(7), false),
+ [RK3366_PD_GPU] = DOMAIN_RK3368("gpu", BIT(15), BIT(15), BIT(2), false),
};
static const struct rockchip_domain_info rk3368_pm_domains[] = {
- [RK3368_PD_PERI] = DOMAIN_RK3368(BIT(13), BIT(12), BIT(6), true),
- [RK3368_PD_VIO] = DOMAIN_RK3368(BIT(15), BIT(14), BIT(8), false),
- [RK3368_PD_VIDEO] = DOMAIN_RK3368(BIT(14), BIT(13), BIT(7), false),
- [RK3368_PD_GPU_0] = DOMAIN_RK3368(BIT(16), BIT(15), BIT(2), false),
- [RK3368_PD_GPU_1] = DOMAIN_RK3368(BIT(17), BIT(16), BIT(2), false),
+ [RK3368_PD_PERI] = DOMAIN_RK3368("peri", BIT(13), BIT(12), BIT(6), true),
+ [RK3368_PD_VIO] = DOMAIN_RK3368("vio", BIT(15), BIT(14), BIT(8), false),
+ [RK3368_PD_VIDEO] = DOMAIN_RK3368("video", BIT(14), BIT(13), BIT(7), false),
+ [RK3368_PD_GPU_0] = DOMAIN_RK3368("gpu_0", BIT(16), BIT(15), BIT(2), false),
+ [RK3368_PD_GPU_1] = DOMAIN_RK3368("gpu_1", BIT(17), BIT(16), BIT(2), false),
};
static const struct rockchip_domain_info rk3399_pm_domains[] = {
- [RK3399_PD_TCPD0] = DOMAIN_RK3399(BIT(8), BIT(8), 0, false),
- [RK3399_PD_TCPD1] = DOMAIN_RK3399(BIT(9), BIT(9), 0, false),
- [RK3399_PD_CCI] = DOMAIN_RK3399(BIT(10), BIT(10), 0, true),
- [RK3399_PD_CCI0] = DOMAIN_RK3399(0, 0, BIT(15), true),
- [RK3399_PD_CCI1] = DOMAIN_RK3399(0, 0, BIT(16), true),
- [RK3399_PD_PERILP] = DOMAIN_RK3399(BIT(11), BIT(11), BIT(1), true),
- [RK3399_PD_PERIHP] = DOMAIN_RK3399(BIT(12), BIT(12), BIT(2), true),
- [RK3399_PD_CENTER] = DOMAIN_RK3399(BIT(13), BIT(13), BIT(14), true),
- [RK3399_PD_VIO] = DOMAIN_RK3399(BIT(14), BIT(14), BIT(17), false),
- [RK3399_PD_GPU] = DOMAIN_RK3399(BIT(15), BIT(15), BIT(0), false),
- [RK3399_PD_VCODEC] = DOMAIN_RK3399(BIT(16), BIT(16), BIT(3), false),
- [RK3399_PD_VDU] = DOMAIN_RK3399(BIT(17), BIT(17), BIT(4), false),
- [RK3399_PD_RGA] = DOMAIN_RK3399(BIT(18), BIT(18), BIT(5), false),
- [RK3399_PD_IEP] = DOMAIN_RK3399(BIT(19), BIT(19), BIT(6), false),
- [RK3399_PD_VO] = DOMAIN_RK3399(BIT(20), BIT(20), 0, false),
- [RK3399_PD_VOPB] = DOMAIN_RK3399(0, 0, BIT(7), false),
- [RK3399_PD_VOPL] = DOMAIN_RK3399(0, 0, BIT(8), false),
- [RK3399_PD_ISP0] = DOMAIN_RK3399(BIT(22), BIT(22), BIT(9), false),
- [RK3399_PD_ISP1] = DOMAIN_RK3399(BIT(23), BIT(23), BIT(10), false),
- [RK3399_PD_HDCP] = DOMAIN_RK3399(BIT(24), BIT(24), BIT(11), false),
- [RK3399_PD_GMAC] = DOMAIN_RK3399(BIT(25), BIT(25), BIT(23), true),
- [RK3399_PD_EMMC] = DOMAIN_RK3399(BIT(26), BIT(26), BIT(24), true),
- [RK3399_PD_USB3] = DOMAIN_RK3399(BIT(27), BIT(27), BIT(12), true),
- [RK3399_PD_EDP] = DOMAIN_RK3399(BIT(28), BIT(28), BIT(22), false),
- [RK3399_PD_GIC] = DOMAIN_RK3399(BIT(29), BIT(29), BIT(27), true),
- [RK3399_PD_SD] = DOMAIN_RK3399(BIT(30), BIT(30), BIT(28), true),
- [RK3399_PD_SDIOAUDIO] = DOMAIN_RK3399(BIT(31), BIT(31), BIT(29), true),
+ [RK3399_PD_TCPD0] = DOMAIN_RK3399("tcpd0", BIT(8), BIT(8), 0, false),
+ [RK3399_PD_TCPD1] = DOMAIN_RK3399("tcpd1", BIT(9), BIT(9), 0, false),
+ [RK3399_PD_CCI] = DOMAIN_RK3399("cci", BIT(10), BIT(10), 0, true),
+ [RK3399_PD_CCI0] = DOMAIN_RK3399("cci0", 0, 0, BIT(15), true),
+ [RK3399_PD_CCI1] = DOMAIN_RK3399("cci1", 0, 0, BIT(16), true),
+ [RK3399_PD_PERILP] = DOMAIN_RK3399("perilp", BIT(11), BIT(11), BIT(1), true),
+ [RK3399_PD_PERIHP] = DOMAIN_RK3399("perihp", BIT(12), BIT(12), BIT(2), true),
+ [RK3399_PD_CENTER] = DOMAIN_RK3399("center", BIT(13), BIT(13), BIT(14), true),
+ [RK3399_PD_VIO] = DOMAIN_RK3399("vio", BIT(14), BIT(14), BIT(17), false),
+ [RK3399_PD_GPU] = DOMAIN_RK3399("gpu", BIT(15), BIT(15), BIT(0), false),
+ [RK3399_PD_VCODEC] = DOMAIN_RK3399("vcodec", BIT(16), BIT(16), BIT(3), false),
+ [RK3399_PD_VDU] = DOMAIN_RK3399("vdu", BIT(17), BIT(17), BIT(4), false),
+ [RK3399_PD_RGA] = DOMAIN_RK3399("rga", BIT(18), BIT(18), BIT(5), false),
+ [RK3399_PD_IEP] = DOMAIN_RK3399("iep", BIT(19), BIT(19), BIT(6), false),
+ [RK3399_PD_VO] = DOMAIN_RK3399("vo", BIT(20), BIT(20), 0, false),
+ [RK3399_PD_VOPB] = DOMAIN_RK3399("vopb", 0, 0, BIT(7), false),
+ [RK3399_PD_VOPL] = DOMAIN_RK3399("vopl", 0, 0, BIT(8), false),
+ [RK3399_PD_ISP0] = DOMAIN_RK3399("isp0", BIT(22), BIT(22), BIT(9), false),
+ [RK3399_PD_ISP1] = DOMAIN_RK3399("isp1", BIT(23), BIT(23), BIT(10), false),
+ [RK3399_PD_HDCP] = DOMAIN_RK3399("hdcp", BIT(24), BIT(24), BIT(11), false),
+ [RK3399_PD_GMAC] = DOMAIN_RK3399("gmac", BIT(25), BIT(25), BIT(23), true),
+ [RK3399_PD_EMMC] = DOMAIN_RK3399("emmc", BIT(26), BIT(26), BIT(24), true),
+ [RK3399_PD_USB3] = DOMAIN_RK3399("usb3", BIT(27), BIT(27), BIT(12), true),
+ [RK3399_PD_EDP] = DOMAIN_RK3399("edp", BIT(28), BIT(28), BIT(22), false),
+ [RK3399_PD_GIC] = DOMAIN_RK3399("gic", BIT(29), BIT(29), BIT(27), true),
+ [RK3399_PD_SD] = DOMAIN_RK3399("sd", BIT(30), BIT(30), BIT(28), true),
+ [RK3399_PD_SDIOAUDIO] = DOMAIN_RK3399("sdioaudio", BIT(31), BIT(31), BIT(29), true),
+};
+
+static const struct rockchip_domain_info rk3568_pm_domains[] = {
+ [RK3568_PD_NPU] = DOMAIN_RK3568("npu", BIT(1), BIT(2), false),
+ [RK3568_PD_GPU] = DOMAIN_RK3568("gpu", BIT(0), BIT(1), false),
+ [RK3568_PD_VI] = DOMAIN_RK3568("vi", BIT(6), BIT(3), false),
+ [RK3568_PD_VO] = DOMAIN_RK3568("vo", BIT(7), BIT(4), false),
+ [RK3568_PD_RGA] = DOMAIN_RK3568("rga", BIT(5), BIT(5), false),
+ [RK3568_PD_VPU] = DOMAIN_RK3568("vpu", BIT(2), BIT(6), false),
+ [RK3568_PD_RKVDEC] = DOMAIN_RK3568("vdec", BIT(4), BIT(8), false),
+ [RK3568_PD_RKVENC] = DOMAIN_RK3568("venc", BIT(3), BIT(7), false),
+ [RK3568_PD_PIPE] = DOMAIN_RK3568("pipe", BIT(8), BIT(11), false),
};
static const struct rockchip_pmu_info px30_pmu = {
@@ -976,6 +999,17 @@
.domain_info = rk3399_pm_domains,
};
+static const struct rockchip_pmu_info rk3568_pmu = {
+ .pwr_offset = 0xa0,
+ .status_offset = 0x98,
+ .req_offset = 0x50,
+ .idle_offset = 0x68,
+ .ack_offset = 0x60,
+
+ .num_domains = ARRAY_SIZE(rk3568_pm_domains),
+ .domain_info = rk3568_pm_domains,
+};
+
static const struct of_device_id rockchip_pm_domain_dt_match[] = {
{
.compatible = "rockchip,px30-power-controller",
@@ -1021,6 +1055,10 @@
.compatible = "rockchip,rk3399-power-controller",
.data = (void *)&rk3399_pmu,
},
+ {
+ .compatible = "rockchip,rk3568-power-controller",
+ .data = (void *)&rk3568_pmu,
+ },
{ /* sentinel */ },
};
diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig
index 976dee0..20ace65 100644
--- a/drivers/soc/tegra/Kconfig
+++ b/drivers/soc/tegra/Kconfig
@@ -144,6 +144,8 @@
config SOC_TEGRA_PMC
bool
select GENERIC_PINCONF
+ select PM_OPP
+ select PM_GENERIC_DOMAINS
config SOC_TEGRA_POWERGATE_BPMP
def_bool y
diff --git a/drivers/soc/tegra/common.c b/drivers/soc/tegra/common.c
index 3dc54f5..cd33e99 100644
--- a/drivers/soc/tegra/common.c
+++ b/drivers/soc/tegra/common.c
@@ -3,9 +3,16 @@
* Copyright (C) 2014 NVIDIA CORPORATION. All rights reserved.
*/
+#define dev_fmt(fmt) "tegra-soc: " fmt
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/export.h>
#include <linux/of.h>
+#include <linux/pm_opp.h>
#include <soc/tegra/common.h>
+#include <soc/tegra/fuse.h>
static const struct of_device_id tegra_machine_match[] = {
{ .compatible = "nvidia,tegra20", },
@@ -31,3 +38,93 @@
return match != NULL;
}
+
+static int tegra_core_dev_init_opp_state(struct device *dev)
+{
+ unsigned long rate;
+ struct clk *clk;
+ int err;
+
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to get clk: %pe\n", clk);
+ return PTR_ERR(clk);
+ }
+
+ rate = clk_get_rate(clk);
+ if (!rate) {
+ dev_err(dev, "failed to get clk rate\n");
+ return -EINVAL;
+ }
+
+ /* first dummy rate-setting initializes voltage vote */
+ err = dev_pm_opp_set_rate(dev, rate);
+ if (err) {
+ dev_err(dev, "failed to initialize OPP clock: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * devm_tegra_core_dev_init_opp_table() - initialize OPP table
+ * @dev: device for which OPP table is initialized
+ * @params: pointer to the OPP table configuration
+ *
+ * This function will initialize OPP table and sync OPP state of a Tegra SoC
+ * core device.
+ *
+ * Return: 0 on success or errorno.
+ */
+int devm_tegra_core_dev_init_opp_table(struct device *dev,
+ struct tegra_core_opp_params *params)
+{
+ u32 hw_version;
+ int err;
+
+ err = devm_pm_opp_set_clkname(dev, NULL);
+ if (err) {
+ dev_err(dev, "failed to set OPP clk: %d\n", err);
+ return err;
+ }
+
+ /* Tegra114+ doesn't support OPP yet */
+ if (!of_machine_is_compatible("nvidia,tegra20") &&
+ !of_machine_is_compatible("nvidia,tegra30"))
+ return -ENODEV;
+
+ if (of_machine_is_compatible("nvidia,tegra20"))
+ hw_version = BIT(tegra_sku_info.soc_process_id);
+ else
+ hw_version = BIT(tegra_sku_info.soc_speedo_id);
+
+ err = devm_pm_opp_set_supported_hw(dev, &hw_version, 1);
+ if (err) {
+ dev_err(dev, "failed to set OPP supported HW: %d\n", err);
+ return err;
+ }
+
+ /*
+ * Older device-trees have an empty OPP table, we will get
+ * -ENODEV from devm_pm_opp_of_add_table() in this case.
+ */
+ err = devm_pm_opp_of_add_table(dev);
+ if (err) {
+ if (err == -ENODEV)
+ dev_err_once(dev, "OPP table not found, please update device-tree\n");
+ else
+ dev_err(dev, "failed to add OPP table: %d\n", err);
+
+ return err;
+ }
+
+ if (params->init_state) {
+ err = tegra_core_dev_init_opp_state(dev);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_tegra_core_dev_init_opp_table);
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index 94b60a6..3d9da3d 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -489,10 +489,8 @@
size_t size = sizeof(*fuse->lookups) * fuse->soc->num_lookups;
fuse->lookups = kmemdup(fuse->soc->lookups, size, GFP_KERNEL);
- if (!fuse->lookups)
- return -ENOMEM;
-
- nvmem_add_cell_lookups(fuse->lookups, fuse->soc->num_lookups);
+ if (fuse->lookups)
+ nvmem_add_cell_lookups(fuse->lookups, fuse->soc->num_lookups);
}
return 0;
diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index 9ea7f016..c1aa781 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -37,7 +37,8 @@
defined(CONFIG_ARCH_TEGRA_132_SOC) || \
defined(CONFIG_ARCH_TEGRA_210_SOC) || \
defined(CONFIG_ARCH_TEGRA_186_SOC) || \
- defined(CONFIG_ARCH_TEGRA_194_SOC)
+ defined(CONFIG_ARCH_TEGRA_194_SOC) || \
+ defined(CONFIG_ARCH_TEGRA_234_SOC)
static u32 tegra30_fuse_read_early(struct tegra_fuse *fuse, unsigned int offset)
{
if (WARN_ON(!fuse->base))
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 4a582ea..ea62f84 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -38,6 +38,7 @@
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
#include <linux/reset.h>
@@ -428,6 +429,9 @@
struct irq_chip irq;
struct notifier_block clk_nb;
+
+ bool core_domain_state_synced;
+ bool core_domain_registered;
};
static struct tegra_pmc *pmc = &(struct tegra_pmc) {
@@ -1297,12 +1301,107 @@
return err;
}
+bool tegra_pmc_core_domain_state_synced(void)
+{
+ return pmc->core_domain_state_synced;
+}
+
+static int
+tegra_pmc_core_pd_set_performance_state(struct generic_pm_domain *genpd,
+ unsigned int level)
+{
+ struct dev_pm_opp *opp;
+ int err;
+
+ opp = dev_pm_opp_find_level_ceil(&genpd->dev, &level);
+ if (IS_ERR(opp)) {
+ dev_err(&genpd->dev, "failed to find OPP for level %u: %pe\n",
+ level, opp);
+ return PTR_ERR(opp);
+ }
+
+ mutex_lock(&pmc->powergates_lock);
+ err = dev_pm_opp_set_opp(pmc->dev, opp);
+ mutex_unlock(&pmc->powergates_lock);
+
+ dev_pm_opp_put(opp);
+
+ if (err) {
+ dev_err(&genpd->dev, "failed to set voltage to %duV: %d\n",
+ level, err);
+ return err;
+ }
+
+ return 0;
+}
+
+static unsigned int
+tegra_pmc_core_pd_opp_to_performance_state(struct generic_pm_domain *genpd,
+ struct dev_pm_opp *opp)
+{
+ return dev_pm_opp_get_level(opp);
+}
+
+static int tegra_pmc_core_pd_add(struct tegra_pmc *pmc, struct device_node *np)
+{
+ struct generic_pm_domain *genpd;
+ const char *rname = "core";
+ int err;
+
+ genpd = devm_kzalloc(pmc->dev, sizeof(*genpd), GFP_KERNEL);
+ if (!genpd)
+ return -ENOMEM;
+
+ genpd->name = np->name;
+ genpd->set_performance_state = tegra_pmc_core_pd_set_performance_state;
+ genpd->opp_to_performance_state = tegra_pmc_core_pd_opp_to_performance_state;
+
+ err = devm_pm_opp_set_regulators(pmc->dev, &rname, 1);
+ if (err)
+ return dev_err_probe(pmc->dev, err,
+ "failed to set core OPP regulator\n");
+
+ err = pm_genpd_init(genpd, NULL, false);
+ if (err) {
+ dev_err(pmc->dev, "failed to init core genpd: %d\n", err);
+ return err;
+ }
+
+ err = of_genpd_add_provider_simple(np, genpd);
+ if (err) {
+ dev_err(pmc->dev, "failed to add core genpd: %d\n", err);
+ goto remove_genpd;
+ }
+
+ pmc->core_domain_registered = true;
+
+ return 0;
+
+remove_genpd:
+ pm_genpd_remove(genpd);
+
+ return err;
+}
+
static int tegra_powergate_init(struct tegra_pmc *pmc,
struct device_node *parent)
{
+ struct of_phandle_args child_args, parent_args;
struct device_node *np, *child;
int err = 0;
+ /*
+ * Core power domain is the parent of powergate domains, hence it
+ * should be registered first.
+ */
+ np = of_get_child_by_name(parent, "core-domain");
+ if (np) {
+ err = tegra_pmc_core_pd_add(pmc, np);
+ of_node_put(np);
+ if (err)
+ return err;
+ }
+
np = of_get_child_by_name(parent, "powergates");
if (!np)
return 0;
@@ -1313,6 +1412,21 @@
of_node_put(child);
break;
}
+
+ if (of_parse_phandle_with_args(child, "power-domains",
+ "#power-domain-cells",
+ 0, &parent_args))
+ continue;
+
+ child_args.np = child;
+ child_args.args_count = 0;
+
+ err = of_genpd_add_subdomain(&parent_args, &child_args);
+ of_node_put(parent_args.np);
+ if (err) {
+ of_node_put(child);
+ break;
+ }
}
of_node_put(np);
@@ -1356,6 +1470,12 @@
}
of_node_put(np);
+
+ np = of_get_child_by_name(parent, "core-domain");
+ if (np) {
+ of_genpd_del_provider(np);
+ of_genpd_remove_last(np);
+ }
}
static const struct tegra_io_pad_soc *
@@ -3667,6 +3787,29 @@
{ }
};
+static void tegra_pmc_sync_state(struct device *dev)
+{
+ int err;
+
+ /*
+ * Older device-trees don't have core PD, and thus, there are
+ * no dependencies that will block the state syncing. We shouldn't
+ * mark the domain as synced in this case.
+ */
+ if (!pmc->core_domain_registered)
+ return;
+
+ pmc->core_domain_state_synced = true;
+
+ /* this is a no-op if core regulator isn't used */
+ mutex_lock(&pmc->powergates_lock);
+ err = dev_pm_opp_sync_regulators(dev);
+ mutex_unlock(&pmc->powergates_lock);
+
+ if (err)
+ dev_err(dev, "failed to sync regulators: %d\n", err);
+}
+
static struct platform_driver tegra_pmc_driver = {
.driver = {
.name = "tegra-pmc",
@@ -3675,6 +3818,7 @@
#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_ARM)
.pm = &tegra_pmc_pm_ops,
#endif
+ .sync_state = tegra_pmc_sync_state,
},
.probe = tegra_pmc_probe,
};
diff --git a/drivers/soc/tegra/regulators-tegra20.c b/drivers/soc/tegra/regulators-tegra20.c
index 367a71a..b8ce9fd 100644
--- a/drivers/soc/tegra/regulators-tegra20.c
+++ b/drivers/soc/tegra/regulators-tegra20.c
@@ -12,16 +12,22 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of.h>
+#include <linux/reboot.h>
#include <linux/regulator/coupler.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <soc/tegra/pmc.h>
+
struct tegra_regulator_coupler {
struct regulator_coupler coupler;
struct regulator_dev *core_rdev;
struct regulator_dev *cpu_rdev;
struct regulator_dev *rtc_rdev;
- int core_min_uV;
+ struct notifier_block reboot_notifier;
+ int core_min_uV, cpu_min_uV;
+ bool sys_reboot_mode_req;
+ bool sys_reboot_mode;
};
static inline struct tegra_regulator_coupler *
@@ -38,6 +44,21 @@
int core_cur_uV;
int err;
+ /*
+ * Tegra20 SoC has critical DVFS-capable devices that are
+ * permanently-active or active at a boot time, like EMC
+ * (DRAM controller) or Display controller for example.
+ *
+ * The voltage of a CORE SoC power domain shall not be dropped below
+ * a minimum level, which is determined by device's clock rate.
+ * This means that we can't fully allow CORE voltage scaling until
+ * the state of all DVFS-critical CORE devices is synced.
+ */
+ if (tegra_pmc_core_domain_state_synced() && !tegra->sys_reboot_mode) {
+ pr_info_once("voltage state synced\n");
+ return 0;
+ }
+
if (tegra->core_min_uV > 0)
return tegra->core_min_uV;
@@ -58,7 +79,7 @@
*/
tegra->core_min_uV = core_max_uV;
- pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
+ pr_info("core voltage initialized to %duV\n", tegra->core_min_uV);
return tegra->core_min_uV;
}
@@ -242,6 +263,10 @@
if (cpu_uV < 0)
return cpu_uV;
+ /* store boot voltage level */
+ if (!tegra->cpu_min_uV)
+ tegra->cpu_min_uV = cpu_uV;
+
/*
* CPU's regulator may not have any consumers, hence the voltage
* must not be changed in that case because CPU simply won't
@@ -250,6 +275,10 @@
if (!cpu_min_uV_consumers)
cpu_min_uV = cpu_uV;
+ /* restore boot voltage level */
+ if (tegra->sys_reboot_mode)
+ cpu_min_uV = max(cpu_min_uV, tegra->cpu_min_uV);
+
if (cpu_min_uV > cpu_uV) {
err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev,
cpu_uV, cpu_min_uV);
@@ -290,6 +319,8 @@
return -EINVAL;
}
+ tegra->sys_reboot_mode = READ_ONCE(tegra->sys_reboot_mode_req);
+
if (rdev == cpu_rdev)
return tegra20_cpu_voltage_update(tegra, cpu_rdev,
core_rdev, rtc_rdev);
@@ -303,6 +334,51 @@
return -EPERM;
}
+static int tegra20_regulator_prepare_reboot(struct tegra_regulator_coupler *tegra,
+ bool sys_reboot_mode)
+{
+ int err;
+
+ if (!tegra->core_rdev || !tegra->rtc_rdev || !tegra->cpu_rdev)
+ return 0;
+
+ WRITE_ONCE(tegra->sys_reboot_mode_req, true);
+
+ /*
+ * Some devices use CPU soft-reboot method and in this case we
+ * should ensure that voltages are sane for the reboot by restoring
+ * the minimum boot levels.
+ */
+ err = regulator_sync_voltage_rdev(tegra->cpu_rdev);
+ if (err)
+ return err;
+
+ err = regulator_sync_voltage_rdev(tegra->core_rdev);
+ if (err)
+ return err;
+
+ WRITE_ONCE(tegra->sys_reboot_mode_req, sys_reboot_mode);
+
+ return 0;
+}
+
+static int tegra20_regulator_reboot(struct notifier_block *notifier,
+ unsigned long event, void *cmd)
+{
+ struct tegra_regulator_coupler *tegra;
+ int ret;
+
+ if (event != SYS_RESTART)
+ return NOTIFY_DONE;
+
+ tegra = container_of(notifier, struct tegra_regulator_coupler,
+ reboot_notifier);
+
+ ret = tegra20_regulator_prepare_reboot(tegra, true);
+
+ return notifier_from_errno(ret);
+}
+
static int tegra20_regulator_attach(struct regulator_coupler *coupler,
struct regulator_dev *rdev)
{
@@ -335,6 +411,14 @@
{
struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+ /*
+ * We don't expect regulators to be decoupled during reboot,
+ * this may race with the reboot handler and shouldn't ever
+ * happen in practice.
+ */
+ if (WARN_ON_ONCE(system_state > SYSTEM_RUNNING))
+ return -EPERM;
+
if (tegra->core_rdev == rdev) {
tegra->core_rdev = NULL;
return 0;
@@ -359,13 +443,19 @@
.detach_regulator = tegra20_regulator_detach,
.balance_voltage = tegra20_regulator_balance_voltage,
},
+ .reboot_notifier.notifier_call = tegra20_regulator_reboot,
};
static int __init tegra_regulator_coupler_init(void)
{
+ int err;
+
if (!of_machine_is_compatible("nvidia,tegra20"))
return 0;
+ err = register_reboot_notifier(&tegra20_coupler.reboot_notifier);
+ WARN_ON(err);
+
return regulator_coupler_register(&tegra20_coupler.coupler);
}
arch_initcall(tegra_regulator_coupler_init);
diff --git a/drivers/soc/tegra/regulators-tegra30.c b/drivers/soc/tegra/regulators-tegra30.c
index 0e776b2..e74bbc9c 100644
--- a/drivers/soc/tegra/regulators-tegra30.c
+++ b/drivers/soc/tegra/regulators-tegra30.c
@@ -12,17 +12,22 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of.h>
+#include <linux/reboot.h>
#include <linux/regulator/coupler.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <soc/tegra/fuse.h>
+#include <soc/tegra/pmc.h>
struct tegra_regulator_coupler {
struct regulator_coupler coupler;
struct regulator_dev *core_rdev;
struct regulator_dev *cpu_rdev;
- int core_min_uV;
+ struct notifier_block reboot_notifier;
+ int core_min_uV, cpu_min_uV;
+ bool sys_reboot_mode_req;
+ bool sys_reboot_mode;
};
static inline struct tegra_regulator_coupler *
@@ -39,6 +44,21 @@
int core_cur_uV;
int err;
+ /*
+ * Tegra30 SoC has critical DVFS-capable devices that are
+ * permanently-active or active at a boot time, like EMC
+ * (DRAM controller) or Display controller for example.
+ *
+ * The voltage of a CORE SoC power domain shall not be dropped below
+ * a minimum level, which is determined by device's clock rate.
+ * This means that we can't fully allow CORE voltage scaling until
+ * the state of all DVFS-critical CORE devices is synced.
+ */
+ if (tegra_pmc_core_domain_state_synced() && !tegra->sys_reboot_mode) {
+ pr_info_once("voltage state synced\n");
+ return 0;
+ }
+
if (tegra->core_min_uV > 0)
return tegra->core_min_uV;
@@ -59,7 +79,7 @@
*/
tegra->core_min_uV = core_max_uV;
- pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
+ pr_info("core voltage initialized to %duV\n", tegra->core_min_uV);
return tegra->core_min_uV;
}
@@ -172,6 +192,10 @@
if (cpu_uV < 0)
return cpu_uV;
+ /* store boot voltage level */
+ if (!tegra->cpu_min_uV)
+ tegra->cpu_min_uV = cpu_uV;
+
/*
* CPU's regulator may not have any consumers, hence the voltage
* must not be changed in that case because CPU simply won't
@@ -195,6 +219,10 @@
if (err)
return err;
+ /* restore boot voltage level */
+ if (tegra->sys_reboot_mode)
+ cpu_min_uV = max(cpu_min_uV, tegra->cpu_min_uV);
+
if (core_min_limited_uV > core_uV) {
pr_err("core voltage constraint violated: %d %d %d\n",
core_uV, core_min_limited_uV, cpu_uV);
@@ -263,9 +291,56 @@
return -EINVAL;
}
+ tegra->sys_reboot_mode = READ_ONCE(tegra->sys_reboot_mode_req);
+
return tegra30_voltage_update(tegra, cpu_rdev, core_rdev);
}
+static int tegra30_regulator_prepare_reboot(struct tegra_regulator_coupler *tegra,
+ bool sys_reboot_mode)
+{
+ int err;
+
+ if (!tegra->core_rdev || !tegra->cpu_rdev)
+ return 0;
+
+ WRITE_ONCE(tegra->sys_reboot_mode_req, true);
+
+ /*
+ * Some devices use CPU soft-reboot method and in this case we
+ * should ensure that voltages are sane for the reboot by restoring
+ * the minimum boot levels.
+ */
+ err = regulator_sync_voltage_rdev(tegra->cpu_rdev);
+ if (err)
+ return err;
+
+ err = regulator_sync_voltage_rdev(tegra->core_rdev);
+ if (err)
+ return err;
+
+ WRITE_ONCE(tegra->sys_reboot_mode_req, sys_reboot_mode);
+
+ return 0;
+}
+
+static int tegra30_regulator_reboot(struct notifier_block *notifier,
+ unsigned long event, void *cmd)
+{
+ struct tegra_regulator_coupler *tegra;
+ int ret;
+
+ if (event != SYS_RESTART)
+ return NOTIFY_DONE;
+
+ tegra = container_of(notifier, struct tegra_regulator_coupler,
+ reboot_notifier);
+
+ ret = tegra30_regulator_prepare_reboot(tegra, true);
+
+ return notifier_from_errno(ret);
+}
+
static int tegra30_regulator_attach(struct regulator_coupler *coupler,
struct regulator_dev *rdev)
{
@@ -292,6 +367,14 @@
{
struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+ /*
+ * We don't expect regulators to be decoupled during reboot,
+ * this may race with the reboot handler and shouldn't ever
+ * happen in practice.
+ */
+ if (WARN_ON_ONCE(system_state > SYSTEM_RUNNING))
+ return -EPERM;
+
if (tegra->core_rdev == rdev) {
tegra->core_rdev = NULL;
return 0;
@@ -311,13 +394,19 @@
.detach_regulator = tegra30_regulator_detach,
.balance_voltage = tegra30_regulator_balance_voltage,
},
+ .reboot_notifier.notifier_call = tegra30_regulator_reboot,
};
static int __init tegra_regulator_coupler_init(void)
{
+ int err;
+
if (!of_machine_is_compatible("nvidia,tegra30"))
return 0;
+ err = register_reboot_notifier(&tegra30_coupler.reboot_notifier);
+ WARN_ON(err);
+
return regulator_coupler_register(&tegra30_coupler.coupler);
}
arch_initcall(tegra_regulator_coupler_init);
diff --git a/drivers/soc/ti/smartreflex.c b/drivers/soc/ti/smartreflex.c
index 5376f3d..06cbee5 100644
--- a/drivers/soc/ti/smartreflex.c
+++ b/drivers/soc/ti/smartreflex.c
@@ -846,10 +846,8 @@
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sr_info->base = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(sr_info->base)) {
- dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
+ if (IS_ERR(sr_info->base))
return PTR_ERR(sr_info->base);
- }
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index c3e2161..09abd17 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -445,10 +445,8 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
m3_ipc->ipc_mem_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(m3_ipc->ipc_mem_base)) {
- dev_err(dev, "could not ioremap ipc_mem\n");
+ if (IS_ERR(m3_ipc->ipc_mem_base))
return PTR_ERR(m3_ipc->ipc_mem_base);
- }
irq = platform_get_irq(pdev, 0);
if (!irq) {
diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
index 3a788ac..5a86cff 100644
--- a/drivers/thermal/devfreq_cooling.c
+++ b/drivers/thermal/devfreq_cooling.c
@@ -458,7 +458,7 @@
EXPORT_SYMBOL_GPL(devfreq_cooling_register);
/**
- * devfreq_cooling_em_register_power() - Register devfreq cooling device with
+ * devfreq_cooling_em_register() - Register devfreq cooling device with
* power information and automatically register Energy Model (EM)
* @df: Pointer to devfreq device.
* @dfc_power: Pointer to devfreq_cooling_power.
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index b01d28e..8d76dbf 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -93,6 +93,7 @@
for_each_available_child_of_node(np, child) {
sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
if (!sensor) {
+ of_node_put(child);
of_node_put(sensor_np);
return -ENOMEM;
}
@@ -104,6 +105,7 @@
dev_err(&pdev->dev,
"failed to get valid sensor resource id: %d\n",
ret);
+ of_node_put(child);
break;
}
@@ -114,6 +116,7 @@
if (IS_ERR(sensor->tzd)) {
dev_err(&pdev->dev, "failed to register thermal zone\n");
ret = PTR_ERR(sensor->tzd);
+ of_node_put(child);
break;
}
diff --git a/drivers/thermal/intel/int340x_thermal/Makefile b/drivers/thermal/intel/int340x_thermal/Makefile
index 38a2731..4e852ce 100644
--- a/drivers/thermal/intel/int340x_thermal/Makefile
+++ b/drivers/thermal/intel/int340x_thermal/Makefile
@@ -4,6 +4,9 @@
obj-$(CONFIG_INT340X_THERMAL) += int3402_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += int3403_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_device.o
+obj-$(CONFIG_INT340X_THERMAL) += int3401_thermal.o
+obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_device_pci_legacy.o
+obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_device_pci.o
obj-$(CONFIG_PROC_THERMAL_MMIO_RAPL) += processor_thermal_rapl.o
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_rfim.o
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_mbox.o
diff --git a/drivers/thermal/intel/int340x_thermal/int3401_thermal.c b/drivers/thermal/intel/int340x_thermal/int3401_thermal.c
new file mode 100644
index 0000000..acebc8b
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/int3401_thermal.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * INT3401 processor thermal device
+ * Copyright (c) 2020, Intel Corporation.
+ */
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+
+static const struct acpi_device_id int3401_device_ids[] = {
+ {"INT3401", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3401_device_ids);
+
+static int int3401_add(struct platform_device *pdev)
+{
+ struct proc_thermal_device *proc_priv;
+ int ret;
+
+ proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+ if (!proc_priv)
+ return -ENOMEM;
+
+ ret = proc_thermal_add(&pdev->dev, proc_priv);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, proc_priv);
+
+ return ret;
+}
+
+static int int3401_remove(struct platform_device *pdev)
+{
+ proc_thermal_remove(platform_get_drvdata(pdev));
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int int3401_thermal_resume(struct device *dev)
+{
+ return proc_thermal_resume(dev);
+}
+#else
+#define int3401_thermal_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(int3401_proc_thermal_pm, NULL, int3401_thermal_resume);
+
+static struct platform_driver int3401_driver = {
+ .probe = int3401_add,
+ .remove = int3401_remove,
+ .driver = {
+ .name = "int3401 thermal",
+ .acpi_match_table = int3401_device_ids,
+ .pm = &int3401_proc_thermal_pm,
+ },
+};
+
+static int __init proc_thermal_init(void)
+{
+ return platform_driver_register(&int3401_driver);
+}
+
+static void __exit proc_thermal_exit(void)
+{
+ platform_driver_unregister(&int3401_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
index 9e6f2a8..0f0038a 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -3,34 +3,17 @@
* processor_thermal_device.c
* Copyright (c) 2014, Intel Corporation.
*/
+#include <linux/acpi.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/acpi.h>
#include <linux/thermal.h>
-#include <linux/cpuhotplug.h>
#include "int340x_thermal_zone.h"
#include "processor_thermal_device.h"
#include "../intel_soc_dts_iosf.h"
#define DRV_NAME "proc_thermal"
-enum proc_thermal_emum_mode_type {
- PROC_THERMAL_NONE,
- PROC_THERMAL_PCI,
- PROC_THERMAL_PLATFORM_DEV
-};
-
-/*
- * We can have only one type of enumeration, PCI or Platform,
- * not both. So we don't need instance specific data.
- */
-static enum proc_thermal_emum_mode_type proc_thermal_emum_mode =
- PROC_THERMAL_NONE;
-
#define POWER_LIMIT_SHOW(index, suffix) \
static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
struct device_attribute *attr, \
@@ -38,11 +21,6 @@
{ \
struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); \
\
- if (proc_thermal_emum_mode == PROC_THERMAL_NONE) { \
- dev_warn(dev, "Attempted to get power limit before device was initialized!\n"); \
- return 0; \
- } \
- \
return sprintf(buf, "%lu\n",\
(unsigned long)proc_dev->power_limits[index].suffix * 1000); \
}
@@ -100,24 +78,27 @@
if (err)
return err;
- val = (val >> 24) & 0xff;
+ val = (val >> 24) & 0x3f;
return sprintf(buf, "%d\n", (int)val);
}
-static int tcc_offset_update(int tcc)
+static int tcc_offset_update(unsigned int tcc)
{
u64 val;
int err;
- if (!tcc)
+ if (tcc > 63)
return -EINVAL;
err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val);
if (err)
return err;
- val &= ~GENMASK_ULL(31, 24);
- val |= (tcc & 0xff) << 24;
+ if (val & BIT(31))
+ return -EPERM;
+
+ val &= ~GENMASK_ULL(29, 24);
+ val |= (tcc & 0x3f) << 24;
err = wrmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, val);
if (err)
@@ -126,14 +107,15 @@
return 0;
}
-static int tcc_offset_save;
+static unsigned int tcc_offset_save;
static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
+ unsigned int tcc;
u64 val;
- int tcc, err;
+ int err;
err = rdmsrl_safe(MSR_PLATFORM_INFO, &val);
if (err)
@@ -142,7 +124,7 @@
if (!(val & BIT(30)))
return -EACCES;
- if (kstrtoint(buf, 0, &tcc))
+ if (kstrtouint(buf, 0, &tcc))
return -EINVAL;
err = tcc_offset_update(tcc);
@@ -291,11 +273,8 @@
}
}
-
-static int proc_thermal_add(struct device *dev,
- struct proc_thermal_device **priv)
+int proc_thermal_add(struct device *dev, struct proc_thermal_device *proc_priv)
{
- struct proc_thermal_device *proc_priv;
struct acpi_device *adev;
acpi_status status;
unsigned long long tmp;
@@ -306,13 +285,8 @@
if (!adev)
return -ENODEV;
- proc_priv = devm_kzalloc(dev, sizeof(*proc_priv), GFP_KERNEL);
- if (!proc_priv)
- return -ENOMEM;
-
proc_priv->dev = dev;
proc_priv->adev = adev;
- *priv = proc_priv;
ret = proc_thermal_read_ppcc(proc_priv);
if (ret)
@@ -338,15 +312,29 @@
if (ret)
goto remove_zone;
+ ret = sysfs_create_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
+ if (ret)
+ goto remove_notify;
+
+ ret = sysfs_create_group(&dev->kobj, &power_limit_attribute_group);
+ if (ret) {
+ sysfs_remove_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
+ goto remove_notify;
+ }
+
return 0;
+remove_notify:
+ acpi_remove_notify_handler(adev->handle,
+ ACPI_DEVICE_NOTIFY, proc_thermal_notify);
remove_zone:
int340x_thermal_zone_remove(proc_priv->int340x_zone);
return ret;
}
+EXPORT_SYMBOL_GPL(proc_thermal_add);
-static void proc_thermal_remove(struct proc_thermal_device *proc_priv)
+void proc_thermal_remove(struct proc_thermal_device *proc_priv)
{
acpi_remove_notify_handler(proc_priv->adev->handle,
ACPI_DEVICE_NOTIFY, proc_thermal_notify);
@@ -355,60 +343,24 @@
sysfs_remove_group(&proc_priv->dev->kobj,
&power_limit_attribute_group);
}
+EXPORT_SYMBOL_GPL(proc_thermal_remove);
-static int int3401_add(struct platform_device *pdev)
+int proc_thermal_resume(struct device *dev)
{
- struct proc_thermal_device *proc_priv;
- int ret;
+ struct proc_thermal_device *proc_dev;
- if (proc_thermal_emum_mode == PROC_THERMAL_PCI) {
- dev_err(&pdev->dev, "error: enumerated as PCI dev\n");
- return -ENODEV;
- }
+ proc_dev = dev_get_drvdata(dev);
+ proc_thermal_read_ppcc(proc_dev);
- ret = proc_thermal_add(&pdev->dev, &proc_priv);
- if (ret)
- return ret;
-
- platform_set_drvdata(pdev, proc_priv);
- proc_thermal_emum_mode = PROC_THERMAL_PLATFORM_DEV;
-
- dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PLATFORM_DEV\n");
-
- ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr);
- if (ret)
- return ret;
-
- ret = sysfs_create_group(&pdev->dev.kobj, &power_limit_attribute_group);
- if (ret)
- sysfs_remove_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr);
-
- return ret;
-}
-
-static int int3401_remove(struct platform_device *pdev)
-{
- proc_thermal_remove(platform_get_drvdata(pdev));
+ tcc_offset_update(tcc_offset_save);
return 0;
}
-
-static irqreturn_t proc_thermal_pci_msi_irq(int irq, void *devid)
-{
- struct proc_thermal_device *proc_priv;
- struct pci_dev *pdev = devid;
-
- proc_priv = pci_get_drvdata(pdev);
-
- intel_soc_dts_iosf_interrupt_handler(proc_priv->soc_dts);
-
- return IRQ_HANDLED;
-}
+EXPORT_SYMBOL_GPL(proc_thermal_resume);
#define MCHBAR 0
-static int proc_thermal_set_mmio_base(struct pci_dev *pdev,
- struct proc_thermal_device *proc_priv)
+static int proc_thermal_set_mmio_base(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
{
int ret;
@@ -423,9 +375,9 @@
return 0;
}
-static int proc_thermal_mmio_add(struct pci_dev *pdev,
- struct proc_thermal_device *proc_priv,
- kernel_ulong_t feature_mask)
+int proc_thermal_mmio_add(struct pci_dev *pdev,
+ struct proc_thermal_device *proc_priv,
+ kernel_ulong_t feature_mask)
{
int ret;
@@ -471,11 +423,10 @@
return ret;
}
+EXPORT_SYMBOL_GPL(proc_thermal_mmio_add);
-static void proc_thermal_mmio_remove(struct pci_dev *pdev)
+void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
{
- struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
-
if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_RAPL)
proc_thermal_rapl_remove();
@@ -486,181 +437,7 @@
if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_MBOX)
proc_thermal_mbox_remove(pdev);
}
-
-static int proc_thermal_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- struct proc_thermal_device *proc_priv;
- int ret;
-
- if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) {
- dev_err(&pdev->dev, "error: enumerated as platform dev\n");
- return -ENODEV;
- }
-
- ret = pcim_enable_device(pdev);
- if (ret < 0) {
- dev_err(&pdev->dev, "error: could not enable device\n");
- return ret;
- }
-
- ret = proc_thermal_add(&pdev->dev, &proc_priv);
- if (ret)
- return ret;
-
- pci_set_drvdata(pdev, proc_priv);
- proc_thermal_emum_mode = PROC_THERMAL_PCI;
-
- if (pdev->device == PCI_DEVICE_ID_INTEL_BSW_THERMAL) {
- /*
- * Enumerate additional DTS sensors available via IOSF.
- * But we are not treating as a failure condition, if
- * there are no aux DTSs enabled or fails. This driver
- * already exposes sensors, which can be accessed via
- * ACPI/MSR. So we don't want to fail for auxiliary DTSs.
- */
- proc_priv->soc_dts = intel_soc_dts_iosf_init(
- INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
-
- if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
- ret = pci_enable_msi(pdev);
- if (!ret) {
- ret = request_threaded_irq(pdev->irq, NULL,
- proc_thermal_pci_msi_irq,
- IRQF_ONESHOT, "proc_thermal",
- pdev);
- if (ret) {
- intel_soc_dts_iosf_exit(
- proc_priv->soc_dts);
- pci_disable_msi(pdev);
- proc_priv->soc_dts = NULL;
- }
- }
- } else
- dev_err(&pdev->dev, "No auxiliary DTSs enabled\n");
- }
-
- dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PCI\n");
-
- ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr);
- if (ret)
- return ret;
-
- ret = sysfs_create_group(&pdev->dev.kobj, &power_limit_attribute_group);
- if (ret) {
- sysfs_remove_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr);
- return ret;
- }
-
- ret = proc_thermal_mmio_add(pdev, proc_priv, id->driver_data);
- if (ret) {
- proc_thermal_remove(proc_priv);
- return ret;
- }
-
- return 0;
-}
-
-static void proc_thermal_pci_remove(struct pci_dev *pdev)
-{
- struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
-
- if (proc_priv->soc_dts) {
- intel_soc_dts_iosf_exit(proc_priv->soc_dts);
- if (pdev->irq) {
- free_irq(pdev->irq, pdev);
- pci_disable_msi(pdev);
- }
- }
-
- proc_thermal_mmio_remove(pdev);
- proc_thermal_remove(proc_priv);
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int proc_thermal_resume(struct device *dev)
-{
- struct proc_thermal_device *proc_dev;
-
- proc_dev = dev_get_drvdata(dev);
- proc_thermal_read_ppcc(proc_dev);
-
- tcc_offset_update(tcc_offset_save);
-
- return 0;
-}
-#else
-#define proc_thermal_resume NULL
-#endif
-
-static SIMPLE_DEV_PM_OPS(proc_thermal_pm, NULL, proc_thermal_resume);
-
-static const struct pci_device_id proc_thermal_pci_ids[] = {
- { PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
- { PCI_DEVICE_DATA(INTEL, BDW_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BSW_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BXT0_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BXT1_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BXTX_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BXTP_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, CNL_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, CFL_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, GLK_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, HSB_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, ICL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
- { PCI_DEVICE_DATA(INTEL, JSL_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, SKL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
- { PCI_DEVICE_DATA(INTEL, TGL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_MBOX) },
- { },
-};
-
-MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
-
-static struct pci_driver proc_thermal_pci_driver = {
- .name = DRV_NAME,
- .probe = proc_thermal_pci_probe,
- .remove = proc_thermal_pci_remove,
- .id_table = proc_thermal_pci_ids,
- .driver.pm = &proc_thermal_pm,
-};
-
-static const struct acpi_device_id int3401_device_ids[] = {
- {"INT3401", 0},
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, int3401_device_ids);
-
-static struct platform_driver int3401_driver = {
- .probe = int3401_add,
- .remove = int3401_remove,
- .driver = {
- .name = "int3401 thermal",
- .acpi_match_table = int3401_device_ids,
- .pm = &proc_thermal_pm,
- },
-};
-
-static int __init proc_thermal_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&int3401_driver);
- if (ret)
- return ret;
-
- ret = pci_register_driver(&proc_thermal_pci_driver);
-
- return ret;
-}
-
-static void __exit proc_thermal_exit(void)
-{
- platform_driver_unregister(&int3401_driver);
- pci_unregister_driver(&proc_thermal_pci_driver);
-}
-
-module_init(proc_thermal_init);
-module_exit(proc_thermal_exit);
+EXPORT_SYMBOL_GPL(proc_thermal_mmio_remove);
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
index b9ed645..5a1cfe4 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
@@ -44,6 +44,7 @@
struct intel_soc_dts_sensors *soc_dts;
u32 mmio_feature_mask;
void __iomem *mmio_base;
+ void *priv_data;
};
struct rapl_mmio_regs {
@@ -79,4 +80,12 @@
int proc_thermal_mbox_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
void proc_thermal_mbox_remove(struct pci_dev *pdev);
+int processor_thermal_send_mbox_cmd(struct pci_dev *pdev, u16 cmd_id, u32 cmd_data, u32 *cmd_resp);
+int proc_thermal_add(struct device *dev, struct proc_thermal_device *priv);
+void proc_thermal_remove(struct proc_thermal_device *proc_priv);
+int proc_thermal_resume(struct device *dev);
+int proc_thermal_mmio_add(struct pci_dev *pdev,
+ struct proc_thermal_device *proc_priv,
+ kernel_ulong_t feature_mask);
+void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
#endif
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
new file mode 100644
index 0000000..11dd2e8
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Processor thermal device for newer processors
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+
+#define DRV_NAME "proc_thermal_pci"
+
+struct proc_thermal_pci {
+ struct pci_dev *pdev;
+ struct proc_thermal_device *proc_priv;
+ struct thermal_zone_device *tzone;
+ struct delayed_work work;
+ int stored_thres;
+ int no_legacy;
+};
+
+enum proc_thermal_mmio_type {
+ PROC_THERMAL_MMIO_TJMAX,
+ PROC_THERMAL_MMIO_PP0_TEMP,
+ PROC_THERMAL_MMIO_PP1_TEMP,
+ PROC_THERMAL_MMIO_PKG_TEMP,
+ PROC_THERMAL_MMIO_THRES_0,
+ PROC_THERMAL_MMIO_THRES_1,
+ PROC_THERMAL_MMIO_INT_ENABLE_0,
+ PROC_THERMAL_MMIO_INT_ENABLE_1,
+ PROC_THERMAL_MMIO_INT_STATUS_0,
+ PROC_THERMAL_MMIO_INT_STATUS_1,
+ PROC_THERMAL_MMIO_MAX
+};
+
+struct proc_thermal_mmio_info {
+ enum proc_thermal_mmio_type mmio_type;
+ u64 mmio_addr;
+ u64 shift;
+ u64 mask;
+};
+
+static struct proc_thermal_mmio_info proc_thermal_mmio_info[] = {
+ { PROC_THERMAL_MMIO_TJMAX, 0x599c, 16, 0xff },
+ { PROC_THERMAL_MMIO_PP0_TEMP, 0x597c, 0, 0xff },
+ { PROC_THERMAL_MMIO_PP1_TEMP, 0x5980, 0, 0xff },
+ { PROC_THERMAL_MMIO_PKG_TEMP, 0x5978, 0, 0xff },
+ { PROC_THERMAL_MMIO_THRES_0, 0x5820, 8, 0x7F },
+ { PROC_THERMAL_MMIO_THRES_1, 0x5820, 16, 0x7F },
+ { PROC_THERMAL_MMIO_INT_ENABLE_0, 0x5820, 15, 0x01 },
+ { PROC_THERMAL_MMIO_INT_ENABLE_1, 0x5820, 23, 0x01 },
+ { PROC_THERMAL_MMIO_INT_STATUS_0, 0x7200, 6, 0x01 },
+ { PROC_THERMAL_MMIO_INT_STATUS_1, 0x7200, 8, 0x01 },
+};
+
+#define B0D4_THERMAL_NOTIFY_DELAY 1000
+static int notify_delay_ms = B0D4_THERMAL_NOTIFY_DELAY;
+
+static void proc_thermal_mmio_read(struct proc_thermal_pci *pci_info,
+ enum proc_thermal_mmio_type type,
+ u32 *value)
+{
+ *value = ioread32(((u8 __iomem *)pci_info->proc_priv->mmio_base +
+ proc_thermal_mmio_info[type].mmio_addr));
+ *value >>= proc_thermal_mmio_info[type].shift;
+ *value &= proc_thermal_mmio_info[type].mask;
+}
+
+static void proc_thermal_mmio_write(struct proc_thermal_pci *pci_info,
+ enum proc_thermal_mmio_type type,
+ u32 value)
+{
+ u32 current_val;
+ u32 mask;
+
+ current_val = ioread32(((u8 __iomem *)pci_info->proc_priv->mmio_base +
+ proc_thermal_mmio_info[type].mmio_addr));
+ mask = proc_thermal_mmio_info[type].mask << proc_thermal_mmio_info[type].shift;
+ current_val &= ~mask;
+
+ value &= proc_thermal_mmio_info[type].mask;
+ value <<= proc_thermal_mmio_info[type].shift;
+
+ current_val |= value;
+ iowrite32(current_val, ((u8 __iomem *)pci_info->proc_priv->mmio_base +
+ proc_thermal_mmio_info[type].mmio_addr));
+}
+
+/*
+ * To avoid sending two many messages to user space, we have 1 second delay.
+ * On interrupt we are disabling interrupt and enabling after 1 second.
+ * This workload function is delayed by 1 second.
+ */
+static void proc_thermal_threshold_work_fn(struct work_struct *work)
+{
+ struct delayed_work *delayed_work = to_delayed_work(work);
+ struct proc_thermal_pci *pci_info = container_of(delayed_work,
+ struct proc_thermal_pci, work);
+ struct thermal_zone_device *tzone = pci_info->tzone;
+
+ if (tzone)
+ thermal_zone_device_update(tzone, THERMAL_TRIP_VIOLATED);
+
+ /* Enable interrupt flag */
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 1);
+}
+
+static void pkg_thermal_schedule_work(struct delayed_work *work)
+{
+ unsigned long ms = msecs_to_jiffies(notify_delay_ms);
+
+ schedule_delayed_work(work, ms);
+}
+
+static irqreturn_t proc_thermal_irq_handler(int irq, void *devid)
+{
+ struct proc_thermal_pci *pci_info = devid;
+ u32 status;
+
+ proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_INT_STATUS_0, &status);
+
+ /* Disable enable interrupt flag */
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0);
+ pci_write_config_byte(pci_info->pdev, 0xdc, 0x01);
+
+ pkg_thermal_schedule_work(&pci_info->work);
+
+ return IRQ_HANDLED;
+}
+
+static int sys_get_curr_temp(struct thermal_zone_device *tzd, int *temp)
+{
+ struct proc_thermal_pci *pci_info = tzd->devdata;
+ u32 _temp;
+
+ proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_PKG_TEMP, &_temp);
+ *temp = (unsigned long)_temp * 1000;
+
+ return 0;
+}
+
+static int sys_get_trip_temp(struct thermal_zone_device *tzd,
+ int trip, int *temp)
+{
+ struct proc_thermal_pci *pci_info = tzd->devdata;
+ u32 _temp;
+
+ proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_THRES_0, &_temp);
+ if (!_temp) {
+ *temp = THERMAL_TEMP_INVALID;
+ } else {
+ int tjmax;
+
+ proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_TJMAX, &tjmax);
+ _temp = tjmax - _temp;
+ *temp = (unsigned long)_temp * 1000;
+ }
+
+ return 0;
+}
+
+static int sys_get_trip_type(struct thermal_zone_device *tzd, int trip,
+ enum thermal_trip_type *type)
+{
+ *type = THERMAL_TRIP_PASSIVE;
+
+ return 0;
+}
+
+static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, int temp)
+{
+ struct proc_thermal_pci *pci_info = tzd->devdata;
+ int tjmax, _temp;
+
+ if (temp <= 0) {
+ cancel_delayed_work_sync(&pci_info->work);
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0);
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, 0);
+ thermal_zone_device_disable(tzd);
+ pci_info->stored_thres = 0;
+ return 0;
+ }
+
+ proc_thermal_mmio_read(pci_info, PROC_THERMAL_MMIO_TJMAX, &tjmax);
+ _temp = tjmax - (temp / 1000);
+ if (_temp < 0)
+ return -EINVAL;
+
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, _temp);
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 1);
+
+ thermal_zone_device_enable(tzd);
+ pci_info->stored_thres = temp;
+
+ return 0;
+}
+
+static struct thermal_zone_device_ops tzone_ops = {
+ .get_temp = sys_get_curr_temp,
+ .get_trip_temp = sys_get_trip_temp,
+ .get_trip_type = sys_get_trip_type,
+ .set_trip_temp = sys_set_trip_temp,
+};
+
+static struct thermal_zone_params tzone_params = {
+ .governor_name = "user_space",
+ .no_hwmon = true,
+};
+
+static int proc_thermal_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct proc_thermal_device *proc_priv;
+ struct proc_thermal_pci *pci_info;
+ int irq_flag = 0, irq, ret;
+
+ proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+ if (!proc_priv)
+ return -ENOMEM;
+
+ pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL);
+ if (!pci_info)
+ return -ENOMEM;
+
+ pci_info->pdev = pdev;
+ ret = pcim_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "error: could not enable device\n");
+ return ret;
+ }
+
+ pci_set_master(pdev);
+
+ INIT_DELAYED_WORK(&pci_info->work, proc_thermal_threshold_work_fn);
+
+ ret = proc_thermal_add(&pdev->dev, proc_priv);
+ if (ret) {
+ dev_err(&pdev->dev, "error: proc_thermal_add, will continue\n");
+ pci_info->no_legacy = 1;
+ }
+
+ proc_priv->priv_data = pci_info;
+ pci_info->proc_priv = proc_priv;
+ pci_set_drvdata(pdev, proc_priv);
+
+ ret = proc_thermal_mmio_add(pdev, proc_priv, id->driver_data);
+ if (ret)
+ goto err_ret_thermal;
+
+ pci_info->tzone = thermal_zone_device_register("TCPU_PCI", 1, 1, pci_info,
+ &tzone_ops,
+ &tzone_params, 0, 0);
+ if (IS_ERR(pci_info->tzone)) {
+ ret = PTR_ERR(pci_info->tzone);
+ goto err_ret_mmio;
+ }
+
+ /* request and enable interrupt */
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to allocate vectors!\n");
+ goto err_ret_tzone;
+ }
+ if (!pdev->msi_enabled && !pdev->msix_enabled)
+ irq_flag = IRQF_SHARED;
+
+ irq = pci_irq_vector(pdev, 0);
+ ret = devm_request_threaded_irq(&pdev->dev, irq,
+ proc_thermal_irq_handler, NULL,
+ irq_flag, KBUILD_MODNAME, pci_info);
+ if (ret) {
+ dev_err(&pdev->dev, "Request IRQ %d failed\n", pdev->irq);
+ goto err_free_vectors;
+ }
+
+ return 0;
+
+err_free_vectors:
+ pci_free_irq_vectors(pdev);
+err_ret_tzone:
+ thermal_zone_device_unregister(pci_info->tzone);
+err_ret_mmio:
+ proc_thermal_mmio_remove(pdev, proc_priv);
+err_ret_thermal:
+ if (!pci_info->no_legacy)
+ proc_thermal_remove(proc_priv);
+ pci_disable_device(pdev);
+
+ return ret;
+}
+
+static void proc_thermal_pci_remove(struct pci_dev *pdev)
+{
+ struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
+ struct proc_thermal_pci *pci_info = proc_priv->priv_data;
+
+ cancel_delayed_work_sync(&pci_info->work);
+
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0, 0);
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 0);
+
+ devm_free_irq(&pdev->dev, pdev->irq, pci_info);
+ pci_free_irq_vectors(pdev);
+
+ thermal_zone_device_unregister(pci_info->tzone);
+ proc_thermal_mmio_remove(pdev, pci_info->proc_priv);
+ if (!pci_info->no_legacy)
+ proc_thermal_remove(proc_priv);
+ pci_disable_device(pdev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int proc_thermal_pci_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct proc_thermal_device *proc_priv;
+ struct proc_thermal_pci *pci_info;
+
+ proc_priv = pci_get_drvdata(pdev);
+ pci_info = proc_priv->priv_data;
+
+ if (pci_info->stored_thres) {
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_THRES_0,
+ pci_info->stored_thres / 1000);
+ proc_thermal_mmio_write(pci_info, PROC_THERMAL_MMIO_INT_ENABLE_0, 1);
+ }
+
+ if (!pci_info->no_legacy)
+ return proc_thermal_resume(dev);
+
+ return 0;
+}
+#else
+#define proc_thermal_pci_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, NULL, proc_thermal_pci_resume);
+
+static const struct pci_device_id proc_thermal_pci_ids[] = {
+ { PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
+ { },
+};
+
+MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
+
+static struct pci_driver proc_thermal_pci_driver = {
+ .name = DRV_NAME,
+ .probe = proc_thermal_pci_probe,
+ .remove = proc_thermal_pci_remove,
+ .id_table = proc_thermal_pci_ids,
+ .driver.pm = &proc_thermal_pci_pm,
+};
+
+static int __init proc_thermal_init(void)
+{
+ return pci_register_driver(&proc_thermal_pci_driver);
+}
+
+static void __exit proc_thermal_exit(void)
+{
+ pci_unregister_driver(&proc_thermal_pci_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
new file mode 100644
index 0000000..f5fc179
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * B0D4 processor thermal device
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+#include "../intel_soc_dts_iosf.h"
+
+#define DRV_NAME "proc_thermal"
+
+static irqreturn_t proc_thermal_pci_msi_irq(int irq, void *devid)
+{
+ struct proc_thermal_device *proc_priv;
+ struct pci_dev *pdev = devid;
+
+ proc_priv = pci_get_drvdata(pdev);
+
+ intel_soc_dts_iosf_interrupt_handler(proc_priv->soc_dts);
+
+ return IRQ_HANDLED;
+}
+
+static int proc_thermal_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct proc_thermal_device *proc_priv;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "error: could not enable device\n");
+ return ret;
+ }
+
+ proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+ if (!proc_priv)
+ return -ENOMEM;
+
+ ret = proc_thermal_add(&pdev->dev, proc_priv);
+ if (ret)
+ return ret;
+
+ pci_set_drvdata(pdev, proc_priv);
+
+ if (pdev->device == PCI_DEVICE_ID_INTEL_BSW_THERMAL) {
+ /*
+ * Enumerate additional DTS sensors available via IOSF.
+ * But we are not treating as a failure condition, if
+ * there are no aux DTSs enabled or fails. This driver
+ * already exposes sensors, which can be accessed via
+ * ACPI/MSR. So we don't want to fail for auxiliary DTSs.
+ */
+ proc_priv->soc_dts = intel_soc_dts_iosf_init(
+ INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
+
+ if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
+ ret = pci_enable_msi(pdev);
+ if (!ret) {
+ ret = request_threaded_irq(pdev->irq, NULL,
+ proc_thermal_pci_msi_irq,
+ IRQF_ONESHOT, "proc_thermal",
+ pdev);
+ if (ret) {
+ intel_soc_dts_iosf_exit(
+ proc_priv->soc_dts);
+ pci_disable_msi(pdev);
+ proc_priv->soc_dts = NULL;
+ }
+ }
+ } else
+ dev_err(&pdev->dev, "No auxiliary DTSs enabled\n");
+ } else {
+
+ }
+
+ ret = proc_thermal_mmio_add(pdev, proc_priv, id->driver_data);
+ if (ret) {
+ proc_thermal_remove(proc_priv);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void proc_thermal_pci_remove(struct pci_dev *pdev)
+{
+ struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
+
+ if (proc_priv->soc_dts) {
+ intel_soc_dts_iosf_exit(proc_priv->soc_dts);
+ if (pdev->irq) {
+ free_irq(pdev->irq, pdev);
+ pci_disable_msi(pdev);
+ }
+ }
+
+ proc_thermal_mmio_remove(pdev, proc_priv);
+ proc_thermal_remove(proc_priv);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int proc_thermal_pci_resume(struct device *dev)
+{
+ return proc_thermal_resume(dev);
+}
+#else
+#define proc_thermal_pci_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, NULL, proc_thermal_pci_resume);
+
+static const struct pci_device_id proc_thermal_pci_ids[] = {
+ { PCI_DEVICE_DATA(INTEL, BDW_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BSW_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BXT0_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BXT1_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BXTX_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BXTP_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, CNL_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, CFL_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, GLK_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, HSB_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, ICL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
+ { PCI_DEVICE_DATA(INTEL, JSL_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, SKL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
+ { PCI_DEVICE_DATA(INTEL, TGL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_MBOX) },
+ { },
+};
+
+MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
+
+static struct pci_driver proc_thermal_pci_driver = {
+ .name = DRV_NAME,
+ .probe = proc_thermal_pci_probe,
+ .remove = proc_thermal_pci_remove,
+ .id_table = proc_thermal_pci_ids,
+ .driver.pm = &proc_thermal_pci_pm,
+};
+
+static int __init proc_thermal_init(void)
+{
+ return pci_register_driver(&proc_thermal_pci_driver);
+}
+
+static void __exit proc_thermal_exit(void)
+{
+ pci_unregister_driver(&proc_thermal_pci_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c
index 990f51f..59e93b0 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c
@@ -23,7 +23,7 @@
static DEFINE_MUTEX(mbox_lock);
-static int send_mbox_cmd(struct pci_dev *pdev, u8 cmd_id, u32 cmd_data, u8 *cmd_resp)
+static int send_mbox_cmd(struct pci_dev *pdev, u16 cmd_id, u32 cmd_data, u32 *cmd_resp)
{
struct proc_thermal_device *proc_priv;
u32 retries, data;
@@ -82,6 +82,12 @@
return ret;
}
+int processor_thermal_send_mbox_cmd(struct pci_dev *pdev, u16 cmd_id, u32 cmd_data, u32 *cmd_resp)
+{
+ return send_mbox_cmd(pdev, cmd_id, cmd_data, cmd_resp);
+}
+EXPORT_SYMBOL_GPL(processor_thermal_send_mbox_cmd);
+
/* List of workload types */
static const char * const workload_types[] = {
"none",
@@ -147,7 +153,7 @@
char *buf)
{
struct pci_dev *pdev = to_pci_dev(dev);
- u8 cmd_resp;
+ u32 cmd_resp;
int ret;
ret = send_mbox_cmd(pdev, MBOX_CMD_WORKLOAD_TYPE_READ, 0, &cmd_resp);
@@ -181,7 +187,7 @@
int proc_thermal_mbox_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
{
- u8 cmd_resp;
+ u32 cmd_resp;
int ret;
/* Check if there is a mailbox support, if fails return success */
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
index aef993a..2b8a323 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
@@ -190,6 +190,59 @@
static DEVICE_ATTR_RO(ddr_data_rate_point_3);
static DEVICE_ATTR_RW(rfi_disable);
+static ssize_t rfi_restriction_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u16 cmd_id = 0x0008;
+ u32 cmd_resp;
+ u32 input;
+ int ret;
+
+ ret = kstrtou32(buf, 10, &input);
+ if (ret)
+ return ret;
+
+ ret = processor_thermal_send_mbox_cmd(to_pci_dev(dev), cmd_id, input, &cmd_resp);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static ssize_t rfi_restriction_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u16 cmd_id = 0x0007;
+ u32 cmd_resp;
+ int ret;
+
+ ret = processor_thermal_send_mbox_cmd(to_pci_dev(dev), cmd_id, 0, &cmd_resp);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%u\n", cmd_resp);
+}
+
+static ssize_t ddr_data_rate_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u16 cmd_id = 0x0107;
+ u32 cmd_resp;
+ int ret;
+
+ ret = processor_thermal_send_mbox_cmd(to_pci_dev(dev), cmd_id, 0, &cmd_resp);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%u\n", cmd_resp);
+}
+
+static DEVICE_ATTR_RW(rfi_restriction);
+static DEVICE_ATTR_RO(ddr_data_rate);
+
static struct attribute *dvfs_attrs[] = {
&dev_attr_rfi_restriction_run_busy.attr,
&dev_attr_rfi_restriction_err_code.attr,
@@ -199,6 +252,8 @@
&dev_attr_ddr_data_rate_point_2.attr,
&dev_attr_ddr_data_rate_point_3.attr,
&dev_attr_rfi_disable.attr,
+ &dev_attr_ddr_data_rate.attr,
+ &dev_attr_rfi_restriction.attr,
NULL
};
diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c
index 4f1a2f7..342b0bb 100644
--- a/drivers/thermal/intel/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel/intel_soc_dts_iosf.c
@@ -350,13 +350,14 @@
int i, j;
for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
- for (j = 0; j < sensors->soc_dts[i].trip_count; ++j) {
- if (!(sensors->soc_dts[i].trip_mask & BIT(j))) {
- return update_trip_temp(&sensors->soc_dts[i], j,
- sensors->tj_max - critical_offset,
- THERMAL_TRIP_CRITICAL);
- }
- }
+ struct intel_soc_dts_sensor_entry *entry = &sensors->soc_dts[i];
+ int temp = sensors->tj_max - critical_offset;
+ unsigned long count = entry->trip_count;
+ unsigned long mask = entry->trip_mask;
+
+ j = find_first_zero_bit(&mask, count);
+ if (j < count)
+ return update_trip_temp(entry, j, temp, THERMAL_TRIP_CRITICAL);
}
return -EINVAL;
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 97e8678..ede94ea 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -23,6 +23,8 @@
#include <linux/reset.h>
#include <linux/types.h>
+#include "thermal_hwmon.h"
+
/* AUXADC Registers */
#define AUXADC_CON1_SET_V 0x008
#define AUXADC_CON1_CLR_V 0x00c
@@ -1087,6 +1089,10 @@
goto err_disable_clk_peri_therm;
}
+ ret = devm_thermal_add_hwmon_sysfs(tzdev);
+ if (ret)
+ dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
+
return 0;
err_disable_clk_peri_therm:
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index e1e4123..fdf16aa 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -143,7 +143,7 @@
* Division is not scaled in BSP and if scaled it might overflow
* the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
*/
- tsc->tj_t = (FIXPT_INT((ptat[1] - ptat[2]) * 157)
+ tsc->tj_t = (FIXPT_INT((ptat[1] - ptat[2]) * (ths_tj_1 - TJ_3))
/ (ptat[0] - ptat[2])) + FIXPT_INT(TJ_3);
tsc->coef.a1 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[2]),
@@ -307,7 +307,7 @@
{
struct rcar_gen3_thermal_priv *priv;
struct device *dev = &pdev->dev;
- const int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev);
+ const int *ths_tj_1 = of_device_get_match_data(dev);
struct resource *res;
struct thermal_zone_device *zone;
int ret, i;
@@ -352,8 +352,7 @@
priv->tscs[i] = tsc;
priv->thermal_init(tsc);
- rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i],
- *rcar_gen3_ths_tj_1);
+ rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i], *ths_tj_1);
zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
&rcar_gen3_tz_of_ops);
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index aa9e0e3..657d84b 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -211,7 +211,11 @@
#define TSADCV3_AUTO_PERIOD_TIME 1875 /* 2.5ms */
#define TSADCV3_AUTO_PERIOD_HT_TIME 1875 /* 2.5ms */
+#define TSADCV5_AUTO_PERIOD_TIME 1622 /* 2.5ms */
+#define TSADCV5_AUTO_PERIOD_HT_TIME 1622 /* 2.5ms */
+
#define TSADCV2_USER_INTER_PD_SOC 0x340 /* 13 clocks */
+#define TSADCV5_USER_INTER_PD_SOC 0xfc0 /* 97us, at least 90us */
#define GRF_SARADC_TESTBIT 0x0e644
#define GRF_TSADC_TESTBIT_L 0x0e648
@@ -219,6 +223,12 @@
#define PX30_GRF_SOC_CON2 0x0408
+#define RK3568_GRF_TSADC_CON 0x0600
+#define RK3568_GRF_TSADC_ANA_REG0 (0x10001 << 0)
+#define RK3568_GRF_TSADC_ANA_REG1 (0x10001 << 1)
+#define RK3568_GRF_TSADC_ANA_REG2 (0x10001 << 2)
+#define RK3568_GRF_TSADC_TSEN (0x10001 << 8)
+
#define GRF_SARADC_TESTBIT_ON (0x10001 << 2)
#define GRF_TSADC_TESTBIT_H_ON (0x10001 << 2)
#define GRF_TSADC_VCM_EN_L (0x10001 << 7)
@@ -474,6 +484,45 @@
{TSADCV3_DATA_MASK, 125000},
};
+static const struct tsadc_table rk3568_code_table[] = {
+ {0, -40000},
+ {1584, -40000},
+ {1620, -35000},
+ {1652, -30000},
+ {1688, -25000},
+ {1720, -20000},
+ {1756, -15000},
+ {1788, -10000},
+ {1824, -5000},
+ {1856, 0},
+ {1892, 5000},
+ {1924, 10000},
+ {1956, 15000},
+ {1992, 20000},
+ {2024, 25000},
+ {2060, 30000},
+ {2092, 35000},
+ {2128, 40000},
+ {2160, 45000},
+ {2196, 50000},
+ {2228, 55000},
+ {2264, 60000},
+ {2300, 65000},
+ {2332, 70000},
+ {2368, 75000},
+ {2400, 80000},
+ {2436, 85000},
+ {2468, 90000},
+ {2500, 95000},
+ {2536, 100000},
+ {2572, 105000},
+ {2604, 110000},
+ {2636, 115000},
+ {2672, 120000},
+ {2704, 125000},
+ {TSADCV2_DATA_MASK, 125000},
+};
+
static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table,
int temp)
{
@@ -701,6 +750,49 @@
regmap_write(grf, PX30_GRF_SOC_CON2, GRF_CON_TSADC_CH_INV);
}
+static void rk_tsadcv7_initialize(struct regmap *grf, void __iomem *regs,
+ enum tshut_polarity tshut_polarity)
+{
+ writel_relaxed(TSADCV5_USER_INTER_PD_SOC, regs + TSADCV2_USER_CON);
+ writel_relaxed(TSADCV5_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
+ writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+ regs + TSADCV2_HIGHT_INT_DEBOUNCE);
+ writel_relaxed(TSADCV5_AUTO_PERIOD_HT_TIME,
+ regs + TSADCV2_AUTO_PERIOD_HT);
+ writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+ regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
+
+ if (tshut_polarity == TSHUT_HIGH_ACTIVE)
+ writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
+ regs + TSADCV2_AUTO_CON);
+ else
+ writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
+ regs + TSADCV2_AUTO_CON);
+
+ /*
+ * The general register file will is optional
+ * and might not be available.
+ */
+ if (!IS_ERR(grf)) {
+ regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_TSEN);
+ /*
+ * RK3568 TRM, section 18.5. requires a delay no less
+ * than 10us between the rising edge of tsadc_tsen_en
+ * and the rising edge of tsadc_ana_reg_0/1/2.
+ */
+ udelay(15);
+ regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG0);
+ regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG1);
+ regmap_write(grf, RK3568_GRF_TSADC_CON, RK3568_GRF_TSADC_ANA_REG2);
+
+ /*
+ * RK3568 TRM, section 18.5. requires a delay no less
+ * than 90us after the rising edge of tsadc_ana_reg_0/1/2.
+ */
+ usleep_range(100, 200);
+ }
+}
+
static void rk_tsadcv2_irq_ack(void __iomem *regs)
{
u32 val;
@@ -1027,6 +1119,31 @@
},
};
+static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
+ .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+ .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+ .chn_num = 2, /* two channels for tsadc */
+
+ .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+ .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+ .tshut_temp = 95000,
+
+ .initialize = rk_tsadcv7_initialize,
+ .irq_ack = rk_tsadcv3_irq_ack,
+ .control = rk_tsadcv3_control,
+ .get_temp = rk_tsadcv2_get_temp,
+ .set_alarm_temp = rk_tsadcv2_alarm_temp,
+ .set_tshut_temp = rk_tsadcv2_tshut_temp,
+ .set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+ .table = {
+ .id = rk3568_code_table,
+ .length = ARRAY_SIZE(rk3568_code_table),
+ .data_mask = TSADCV2_DATA_MASK,
+ .mode = ADC_INCREMENT,
+ },
+};
+
static const struct of_device_id of_rockchip_thermal_match[] = {
{ .compatible = "rockchip,px30-tsadc",
.data = (void *)&px30_tsadc_data,
@@ -1059,6 +1176,10 @@
.compatible = "rockchip,rk3399-tsadc",
.data = (void *)&rk3399_tsadc_data,
},
+ {
+ .compatible = "rockchip,rk3568-tsadc",
+ .data = (void *)&rk3568_tsadc_data,
+ },
{ /* end */ },
};
MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
diff --git a/drivers/thermal/sprd_thermal.c b/drivers/thermal/sprd_thermal.c
index 3682edb..fff80fc 100644
--- a/drivers/thermal/sprd_thermal.c
+++ b/drivers/thermal/sprd_thermal.c
@@ -388,7 +388,7 @@
sen = devm_kzalloc(&pdev->dev, sizeof(*sen), GFP_KERNEL);
if (!sen) {
ret = -ENOMEM;
- goto disable_clk;
+ goto of_put;
}
sen->data = thm;
@@ -397,13 +397,13 @@
ret = of_property_read_u32(sen_child, "reg", &sen->id);
if (ret) {
dev_err(&pdev->dev, "get sensor reg failed");
- goto disable_clk;
+ goto of_put;
}
ret = sprd_thm_sensor_calibration(sen_child, thm, sen);
if (ret) {
dev_err(&pdev->dev, "efuse cal analysis failed");
- goto disable_clk;
+ goto of_put;
}
sprd_thm_sensor_init(thm, sen);
@@ -416,19 +416,20 @@
dev_err(&pdev->dev, "register thermal zone failed %d\n",
sen->id);
ret = PTR_ERR(sen->tzd);
- goto disable_clk;
+ goto of_put;
}
thm->sensor[sen->id] = sen;
}
+ /* sen_child set to NULL at this point */
ret = sprd_thm_set_ready(thm);
if (ret)
- goto disable_clk;
+ goto of_put;
ret = sprd_thm_wait_temp_ready(thm);
if (ret)
- goto disable_clk;
+ goto of_put;
for (i = 0; i < thm->nr_sensors; i++)
sprd_thm_toggle_sensor(thm->sensor[i], true);
@@ -436,6 +437,8 @@
platform_set_drvdata(pdev, thm);
return 0;
+of_put:
+ of_node_put(sen_child);
disable_clk:
clk_disable_unprepare(thm->clk);
return ret;
@@ -532,6 +535,7 @@
{ .compatible = "sprd,ums512-thermal", .data = &ums512_data },
{ },
};
+MODULE_DEVICE_TABLE(of, sprd_thermal_of_match);
static const struct dev_pm_ops sprd_thermal_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(sprd_thm_suspend, sprd_thm_resume)
diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
index a011445..d68596c 100644
--- a/drivers/thermal/st/st_thermal_memmap.c
+++ b/drivers/thermal/st/st_thermal_memmap.c
@@ -119,19 +119,10 @@
{
struct device *dev = sensor->dev;
struct platform_device *pdev = to_platform_device(dev);
- struct resource *res;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "no memory resources defined\n");
- return -ENODEV;
- }
-
- sensor->mmio_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(sensor->mmio_base)) {
- dev_err(dev, "failed to remap IO\n");
+ sensor->mmio_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+ if (IS_ERR(sensor->mmio_base))
return PTR_ERR(sensor->mmio_base);
- }
sensor->regmap = devm_regmap_init_mmio(dev, sensor->mmio_base,
&st_416mpe_regmap_config);
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 10a2d8e..97ef9b0 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1315,7 +1315,7 @@
EXPORT_SYMBOL_GPL(thermal_zone_device_register);
/**
- * thermal_device_unregister - removes the registered thermal zone device
+ * thermal_zone_device_unregister - removes the registered thermal zone device
* @tz: the thermal zone device to remove
*/
void thermal_zone_device_unregister(struct thermal_zone_device *tz)
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index 5b76f9a..6379f26 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -559,6 +559,9 @@
if (!tz)
return;
+ /* stop temperature polling */
+ thermal_zone_device_disable(tzd);
+
mutex_lock(&tzd->lock);
tzd->ops->get_temp = NULL;
tzd->ops->get_trend = NULL;
diff --git a/include/dt-bindings/mailbox/qcom-ipcc.h b/include/dt-bindings/mailbox/qcom-ipcc.h
index 4c23eef..eb91a6c 100644
--- a/include/dt-bindings/mailbox/qcom-ipcc.h
+++ b/include/dt-bindings/mailbox/qcom-ipcc.h
@@ -29,5 +29,6 @@
#define IPCC_CLIENT_PCIE1 14
#define IPCC_CLIENT_PCIE2 15
#define IPCC_CLIENT_SPSS 16
+#define IPCC_CLIENT_WPSS 24
#endif
diff --git a/include/dt-bindings/pinctrl/hisi.h b/include/dt-bindings/pinctrl/hisi.h
index 0359bfd..93064c7 100644
--- a/include/dt-bindings/pinctrl/hisi.h
+++ b/include/dt-bindings/pinctrl/hisi.h
@@ -1,7 +1,7 @@
/*
* This header provides constants for hisilicon pinctrl bindings.
*
- * Copyright (c) 2015 Hisilicon Limited.
+ * Copyright (c) 2015 HiSilicon Limited.
* Copyright (c) 2015 Linaro Limited.
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/dt-bindings/power/imx8mm-power.h b/include/dt-bindings/power/imx8mm-power.h
new file mode 100644
index 0000000..fc9c2e1
--- /dev/null
+++ b/include/dt-bindings/power/imx8mm-power.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (C) 2020 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#ifndef __DT_BINDINGS_IMX8MM_POWER_H__
+#define __DT_BINDINGS_IMX8MM_POWER_H__
+
+#define IMX8MM_POWER_DOMAIN_HSIOMIX 0
+#define IMX8MM_POWER_DOMAIN_PCIE 1
+#define IMX8MM_POWER_DOMAIN_OTG1 2
+#define IMX8MM_POWER_DOMAIN_OTG2 3
+#define IMX8MM_POWER_DOMAIN_GPUMIX 4
+#define IMX8MM_POWER_DOMAIN_GPU 5
+#define IMX8MM_POWER_DOMAIN_VPUMIX 6
+#define IMX8MM_POWER_DOMAIN_VPUG1 7
+#define IMX8MM_POWER_DOMAIN_VPUG2 8
+#define IMX8MM_POWER_DOMAIN_VPUH1 9
+#define IMX8MM_POWER_DOMAIN_DISPMIX 10
+#define IMX8MM_POWER_DOMAIN_MIPI 11
+
+#endif
diff --git a/include/dt-bindings/power/imx8mn-power.h b/include/dt-bindings/power/imx8mn-power.h
new file mode 100644
index 0000000..102ee85a
--- /dev/null
+++ b/include/dt-bindings/power/imx8mn-power.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (C) 2020 Compass Electronics Group, LLC
+ */
+
+#ifndef __DT_BINDINGS_IMX8MN_POWER_H__
+#define __DT_BINDINGS_IMX8MN_POWER_H__
+
+#define IMX8MN_POWER_DOMAIN_HSIOMIX 0
+#define IMX8MN_POWER_DOMAIN_OTG1 1
+#define IMX8MN_POWER_DOMAIN_GPUMIX 2
+#define IMX8MN_POWER_DOMAIN_DISPMIX 3
+#define IMX8MN_POWER_DOMAIN_MIPI 4
+
+#endif
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index eedb5d9..8b5708b 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -81,6 +81,19 @@
#define SC7280_LCX 7
#define SC7280_MSS 8
+/* SC8180X Power Domain Indexes */
+#define SC8180X_CX 0
+#define SC8180X_CX_AO 1
+#define SC8180X_EBI 2
+#define SC8180X_GFX 3
+#define SC8180X_LCX 4
+#define SC8180X_LMX 5
+#define SC8180X_MMCX 6
+#define SC8180X_MMCX_AO 7
+#define SC8180X_MSS 8
+#define SC8180X_MX 9
+#define SC8180X_MX_AO 10
+
/* SDM845 Power Domain performance levels */
#define RPMH_REGULATOR_LEVEL_RETENTION 16
#define RPMH_REGULATOR_LEVEL_MIN_SVS 48
@@ -95,6 +108,14 @@
#define RPMH_REGULATOR_LEVEL_TURBO 384
#define RPMH_REGULATOR_LEVEL_TURBO_L1 416
+/* MDM9607 Power Domains */
+#define MDM9607_VDDCX 0
+#define MDM9607_VDDCX_AO 1
+#define MDM9607_VDDCX_VFL 2
+#define MDM9607_VDDMX 3
+#define MDM9607_VDDMX_AO 4
+#define MDM9607_VDDMX_VFL 5
+
/* MSM8939 Power Domains */
#define MSM8939_VDDMDCX 0
#define MSM8939_VDDMDCX_AO 1
diff --git a/include/dt-bindings/power/rk3568-power.h b/include/dt-bindings/power/rk3568-power.h
new file mode 100644
index 0000000..6cc1af1
--- /dev/null
+++ b/include/dt-bindings/power/rk3568-power.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_POWER_RK3568_POWER_H__
+#define __DT_BINDINGS_POWER_RK3568_POWER_H__
+
+/* VD_CORE */
+#define RK3568_PD_CPU_0 0
+#define RK3568_PD_CPU_1 1
+#define RK3568_PD_CPU_2 2
+#define RK3568_PD_CPU_3 3
+#define RK3568_PD_CORE_ALIVE 4
+
+/* VD_PMU */
+#define RK3568_PD_PMU 5
+
+/* VD_NPU */
+#define RK3568_PD_NPU 6
+
+/* VD_GPU */
+#define RK3568_PD_GPU 7
+
+/* VD_LOGIC */
+#define RK3568_PD_VI 8
+#define RK3568_PD_VO 9
+#define RK3568_PD_RGA 10
+#define RK3568_PD_VPU 11
+#define RK3568_PD_CENTER 12
+#define RK3568_PD_RKVDEC 13
+#define RK3568_PD_RKVENC 14
+#define RK3568_PD_PIPE 15
+#define RK3568_PD_LOGIC_ALIVE 16
+
+#endif
diff --git a/include/linux/arm_ffa.h b/include/linux/arm_ffa.h
new file mode 100644
index 0000000..505c679
--- /dev/null
+++ b/include/linux/arm_ffa.h
@@ -0,0 +1,267 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 ARM Ltd.
+ */
+
+#ifndef _LINUX_ARM_FFA_H
+#define _LINUX_ARM_FFA_H
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/uuid.h>
+
+/* FFA Bus/Device/Driver related */
+struct ffa_device {
+ int vm_id;
+ bool mode_32bit;
+ uuid_t uuid;
+ struct device dev;
+};
+
+#define to_ffa_dev(d) container_of(d, struct ffa_device, dev)
+
+struct ffa_device_id {
+ uuid_t uuid;
+};
+
+struct ffa_driver {
+ const char *name;
+ int (*probe)(struct ffa_device *sdev);
+ void (*remove)(struct ffa_device *sdev);
+ const struct ffa_device_id *id_table;
+
+ struct device_driver driver;
+};
+
+#define to_ffa_driver(d) container_of(d, struct ffa_driver, driver)
+
+static inline void ffa_dev_set_drvdata(struct ffa_device *fdev, void *data)
+{
+ fdev->dev.driver_data = data;
+}
+
+#if IS_REACHABLE(CONFIG_ARM_FFA_TRANSPORT)
+struct ffa_device *ffa_device_register(const uuid_t *uuid, int vm_id);
+void ffa_device_unregister(struct ffa_device *ffa_dev);
+int ffa_driver_register(struct ffa_driver *driver, struct module *owner,
+ const char *mod_name);
+void ffa_driver_unregister(struct ffa_driver *driver);
+bool ffa_device_is_valid(struct ffa_device *ffa_dev);
+const struct ffa_dev_ops *ffa_dev_ops_get(struct ffa_device *dev);
+
+#else
+static inline
+struct ffa_device *ffa_device_register(const uuid_t *uuid, int vm_id)
+{
+ return NULL;
+}
+
+static inline void ffa_device_unregister(struct ffa_device *dev) {}
+
+static inline int
+ffa_driver_register(struct ffa_driver *driver, struct module *owner,
+ const char *mod_name)
+{
+ return -EINVAL;
+}
+
+static inline void ffa_driver_unregister(struct ffa_driver *driver) {}
+
+static inline
+bool ffa_device_is_valid(struct ffa_device *ffa_dev) { return false; }
+
+static inline
+const struct ffa_dev_ops *ffa_dev_ops_get(struct ffa_device *dev)
+{
+ return NULL;
+}
+#endif /* CONFIG_ARM_FFA_TRANSPORT */
+
+#define ffa_register(driver) \
+ ffa_driver_register(driver, THIS_MODULE, KBUILD_MODNAME)
+#define ffa_unregister(driver) \
+ ffa_driver_unregister(driver)
+
+/**
+ * module_ffa_driver() - Helper macro for registering a psa_ffa driver
+ * @__ffa_driver: ffa_driver structure
+ *
+ * Helper macro for psa_ffa drivers to set up proper module init / exit
+ * functions. Replaces module_init() and module_exit() and keeps people from
+ * printing pointless things to the kernel log when their driver is loaded.
+ */
+#define module_ffa_driver(__ffa_driver) \
+ module_driver(__ffa_driver, ffa_register, ffa_unregister)
+
+/* FFA transport related */
+struct ffa_partition_info {
+ u16 id;
+ u16 exec_ctxt;
+/* partition supports receipt of direct requests */
+#define FFA_PARTITION_DIRECT_RECV BIT(0)
+/* partition can send direct requests. */
+#define FFA_PARTITION_DIRECT_SEND BIT(1)
+/* partition can send and receive indirect messages. */
+#define FFA_PARTITION_INDIRECT_MSG BIT(2)
+ u32 properties;
+};
+
+/* For use with FFA_MSG_SEND_DIRECT_{REQ,RESP} which pass data via registers */
+struct ffa_send_direct_data {
+ unsigned long data0; /* w3/x3 */
+ unsigned long data1; /* w4/x4 */
+ unsigned long data2; /* w5/x5 */
+ unsigned long data3; /* w6/x6 */
+ unsigned long data4; /* w7/x7 */
+};
+
+struct ffa_mem_region_addr_range {
+ /* The base IPA of the constituent memory region, aligned to 4 kiB */
+ u64 address;
+ /* The number of 4 kiB pages in the constituent memory region. */
+ u32 pg_cnt;
+ u32 reserved;
+};
+
+struct ffa_composite_mem_region {
+ /*
+ * The total number of 4 kiB pages included in this memory region. This
+ * must be equal to the sum of page counts specified in each
+ * `struct ffa_mem_region_addr_range`.
+ */
+ u32 total_pg_cnt;
+ /* The number of constituents included in this memory region range */
+ u32 addr_range_cnt;
+ u64 reserved;
+ /** An array of `addr_range_cnt` memory region constituents. */
+ struct ffa_mem_region_addr_range constituents[];
+};
+
+struct ffa_mem_region_attributes {
+ /* The ID of the VM to which the memory is being given or shared. */
+ u16 receiver;
+ /*
+ * The permissions with which the memory region should be mapped in the
+ * receiver's page table.
+ */
+#define FFA_MEM_EXEC BIT(3)
+#define FFA_MEM_NO_EXEC BIT(2)
+#define FFA_MEM_RW BIT(1)
+#define FFA_MEM_RO BIT(0)
+ u8 attrs;
+ /*
+ * Flags used during FFA_MEM_RETRIEVE_REQ and FFA_MEM_RETRIEVE_RESP
+ * for memory regions with multiple borrowers.
+ */
+#define FFA_MEM_RETRIEVE_SELF_BORROWER BIT(0)
+ u8 flag;
+ u32 composite_off;
+ /*
+ * Offset in bytes from the start of the outer `ffa_memory_region` to
+ * an `struct ffa_mem_region_addr_range`.
+ */
+ u64 reserved;
+};
+
+struct ffa_mem_region {
+ /* The ID of the VM/owner which originally sent the memory region */
+ u16 sender_id;
+#define FFA_MEM_NORMAL BIT(5)
+#define FFA_MEM_DEVICE BIT(4)
+
+#define FFA_MEM_WRITE_BACK (3 << 2)
+#define FFA_MEM_NON_CACHEABLE (1 << 2)
+
+#define FFA_DEV_nGnRnE (0 << 2)
+#define FFA_DEV_nGnRE (1 << 2)
+#define FFA_DEV_nGRE (2 << 2)
+#define FFA_DEV_GRE (3 << 2)
+
+#define FFA_MEM_NON_SHAREABLE (0)
+#define FFA_MEM_OUTER_SHAREABLE (2)
+#define FFA_MEM_INNER_SHAREABLE (3)
+ u8 attributes;
+ u8 reserved_0;
+/*
+ * Clear memory region contents after unmapping it from the sender and
+ * before mapping it for any receiver.
+ */
+#define FFA_MEM_CLEAR BIT(0)
+/*
+ * Whether the hypervisor may time slice the memory sharing or retrieval
+ * operation.
+ */
+#define FFA_TIME_SLICE_ENABLE BIT(1)
+
+#define FFA_MEM_RETRIEVE_TYPE_IN_RESP (0 << 3)
+#define FFA_MEM_RETRIEVE_TYPE_SHARE (1 << 3)
+#define FFA_MEM_RETRIEVE_TYPE_LEND (2 << 3)
+#define FFA_MEM_RETRIEVE_TYPE_DONATE (3 << 3)
+
+#define FFA_MEM_RETRIEVE_ADDR_ALIGN_HINT BIT(9)
+#define FFA_MEM_RETRIEVE_ADDR_ALIGN(x) ((x) << 5)
+ /* Flags to control behaviour of the transaction. */
+ u32 flags;
+#define HANDLE_LOW_MASK GENMASK_ULL(31, 0)
+#define HANDLE_HIGH_MASK GENMASK_ULL(63, 32)
+#define HANDLE_LOW(x) ((u32)(FIELD_GET(HANDLE_LOW_MASK, (x))))
+#define HANDLE_HIGH(x) ((u32)(FIELD_GET(HANDLE_HIGH_MASK, (x))))
+
+#define PACK_HANDLE(l, h) \
+ (FIELD_PREP(HANDLE_LOW_MASK, (l)) | FIELD_PREP(HANDLE_HIGH_MASK, (h)))
+ /*
+ * A globally-unique ID assigned by the hypervisor for a region
+ * of memory being sent between VMs.
+ */
+ u64 handle;
+ /*
+ * An implementation defined value associated with the receiver and the
+ * memory region.
+ */
+ u64 tag;
+ u32 reserved_1;
+ /*
+ * The number of `ffa_mem_region_attributes` entries included in this
+ * transaction.
+ */
+ u32 ep_count;
+ /*
+ * An array of endpoint memory access descriptors.
+ * Each one specifies a memory region offset, an endpoint and the
+ * attributes with which this memory region should be mapped in that
+ * endpoint's page table.
+ */
+ struct ffa_mem_region_attributes ep_mem_access[];
+};
+
+#define COMPOSITE_OFFSET(x) \
+ (offsetof(struct ffa_mem_region, ep_mem_access[x]))
+#define CONSTITUENTS_OFFSET(x) \
+ (offsetof(struct ffa_composite_mem_region, constituents[x]))
+#define COMPOSITE_CONSTITUENTS_OFFSET(x, y) \
+ (COMPOSITE_OFFSET(x) + CONSTITUENTS_OFFSET(y))
+
+struct ffa_mem_ops_args {
+ bool use_txbuf;
+ u32 nattrs;
+ u32 flags;
+ u64 tag;
+ u64 g_handle;
+ struct scatterlist *sg;
+ struct ffa_mem_region_attributes *attrs;
+};
+
+struct ffa_dev_ops {
+ u32 (*api_version_get)(void);
+ int (*partition_info_get)(const char *uuid_str,
+ struct ffa_partition_info *buffer);
+ void (*mode_32bit_set)(struct ffa_device *dev);
+ int (*sync_send_receive)(struct ffa_device *dev,
+ struct ffa_send_direct_data *data);
+ int (*memory_reclaim)(u64 g_handle, u32 flags);
+ int (*memory_share)(struct ffa_device *dev,
+ struct ffa_mem_ops_args *args);
+};
+
+#endif /* _LINUX_ARM_FFA_H */
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 47e1358..f39b34b 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -171,7 +171,6 @@
CPUHP_AP_PERF_X86_CSTATE_ONLINE,
CPUHP_AP_PERF_X86_IDXD_ONLINE,
CPUHP_AP_PERF_S390_CF_ONLINE,
- CPUHP_AP_PERF_S390_CFD_ONLINE,
CPUHP_AP_PERF_S390_SF_ONLINE,
CPUHP_AP_PERF_ARM_CCI_ONLINE,
CPUHP_AP_PERF_ARM_CCN_ONLINE,
diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h
index cc8fa10..20d1079 100644
--- a/include/linux/kconfig.h
+++ b/include/linux/kconfig.h
@@ -51,7 +51,8 @@
/*
* IS_MODULE(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'm', 0
- * otherwise.
+ * otherwise. CONFIG_FOO=m results in "#define CONFIG_FOO_MODULE 1" in
+ * autoconf.h.
*/
#define IS_MODULE(option) __is_defined(option##_MODULE)
@@ -66,7 +67,8 @@
/*
* IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y' or 'm',
- * 0 otherwise.
+ * 0 otherwise. Note that CONFIG_FOO=y results in "#define CONFIG_FOO 1" in
+ * autoconf.h, while CONFIG_FOO=m results in "#define CONFIG_FOO_MODULE 1".
*/
#define IS_ENABLED(option) __or(IS_BUILTIN(option), IS_MODULE(option))
diff --git a/include/linux/platform_data/pata_ixp4xx_cf.h b/include/linux/platform_data/pata_ixp4xx_cf.h
new file mode 100644
index 0000000..601ba97
--- /dev/null
+++ b/include/linux/platform_data/pata_ixp4xx_cf.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PLATFORM_DATA_PATA_IXP4XX_H
+#define __PLATFORM_DATA_PATA_IXP4XX_H
+
+#include <linux/types.h>
+
+/*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+ * passed as platform_data.
+ */
+struct ixp4xx_pata_data {
+ volatile u32 *cs0_cfg;
+ volatile u32 *cs1_cfg;
+ unsigned long cs0_bits;
+ unsigned long cs1_bits;
+ void __iomem *cs0;
+ void __iomem *cs1;
+};
+
+#endif
diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h
index ec35814..0fa4f60 100644
--- a/include/linux/reset-controller.h
+++ b/include/linux/reset-controller.h
@@ -79,6 +79,7 @@
unsigned int nr_resets;
};
+#if IS_ENABLED(CONFIG_RESET_CONTROLLER)
int reset_controller_register(struct reset_controller_dev *rcdev);
void reset_controller_unregister(struct reset_controller_dev *rcdev);
@@ -88,5 +89,26 @@
void reset_controller_add_lookup(struct reset_control_lookup *lookup,
unsigned int num_entries);
+#else
+static inline int reset_controller_register(struct reset_controller_dev *rcdev)
+{
+ return 0;
+}
+
+static inline void reset_controller_unregister(struct reset_controller_dev *rcdev)
+{
+}
+
+static inline int devm_reset_controller_register(struct device *dev,
+ struct reset_controller_dev *rcdev)
+{
+ return 0;
+}
+
+static inline void reset_controller_add_lookup(struct reset_control_lookup *lookup,
+ unsigned int num_entries)
+{
+}
+#endif
#endif
diff --git a/include/linux/soc/ixp4xx/cpu.h b/include/linux/soc/ixp4xx/cpu.h
new file mode 100644
index 0000000..88bd8de
--- /dev/null
+++ b/include/linux/soc/ixp4xx/cpu.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * IXP4XX cpu type detection
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ */
+
+#ifndef __SOC_IXP4XX_CPU_H__
+#define __SOC_IXP4XX_CPU_H__
+
+#include <linux/io.h>
+#ifdef CONFIG_ARM
+#include <asm/cputype.h>
+#endif
+
+/* Processor id value in CP15 Register 0 */
+#define IXP42X_PROCESSOR_ID_VALUE 0x690541c0 /* including unused 0x690541Ex */
+#define IXP42X_PROCESSOR_ID_MASK 0xffffffc0
+
+#define IXP43X_PROCESSOR_ID_VALUE 0x69054040
+#define IXP43X_PROCESSOR_ID_MASK 0xfffffff0
+
+#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
+#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
+
+/* "fuse" bits of IXP_EXP_CFG2 */
+/* All IXP4xx CPUs */
+#define IXP4XX_FEATURE_RCOMP (1 << 0)
+#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
+#define IXP4XX_FEATURE_HASH (1 << 2)
+#define IXP4XX_FEATURE_AES (1 << 3)
+#define IXP4XX_FEATURE_DES (1 << 4)
+#define IXP4XX_FEATURE_HDLC (1 << 5)
+#define IXP4XX_FEATURE_AAL (1 << 6)
+#define IXP4XX_FEATURE_HSS (1 << 7)
+#define IXP4XX_FEATURE_UTOPIA (1 << 8)
+#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
+#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
+#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
+#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
+#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
+#define IXP4XX_FEATURE_PCI (1 << 14)
+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
+#define IXP42X_FEATURE_MASK (IXP4XX_FEATURE_RCOMP | \
+ IXP4XX_FEATURE_USB_DEVICE | \
+ IXP4XX_FEATURE_HASH | \
+ IXP4XX_FEATURE_AES | \
+ IXP4XX_FEATURE_DES | \
+ IXP4XX_FEATURE_HDLC | \
+ IXP4XX_FEATURE_AAL | \
+ IXP4XX_FEATURE_HSS | \
+ IXP4XX_FEATURE_UTOPIA | \
+ IXP4XX_FEATURE_NPEB_ETH0 | \
+ IXP4XX_FEATURE_NPEC_ETH | \
+ IXP4XX_FEATURE_RESET_NPEA | \
+ IXP4XX_FEATURE_RESET_NPEB | \
+ IXP4XX_FEATURE_RESET_NPEC | \
+ IXP4XX_FEATURE_PCI | \
+ IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
+ IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+
+/* IXP43x/46x CPUs */
+#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
+#define IXP4XX_FEATURE_USB_HOST (1 << 18)
+#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
+#define IXP43X_FEATURE_MASK (IXP42X_FEATURE_MASK | \
+ IXP4XX_FEATURE_ECC_TIMESYNC | \
+ IXP4XX_FEATURE_USB_HOST | \
+ IXP4XX_FEATURE_NPEA_ETH)
+
+/* IXP46x CPU (including IXP455) only */
+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
+#define IXP4XX_FEATURE_RSA (1 << 21)
+#define IXP46X_FEATURE_MASK (IXP43X_FEATURE_MASK | \
+ IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
+ IXP4XX_FEATURE_RSA)
+
+#ifdef CONFIG_ARCH_IXP4XX
+#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
+ IXP42X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
+ IXP42X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
+ IXP43X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
+ IXP46X_PROCESSOR_ID_VALUE)
+
+u32 ixp4xx_read_feature_bits(void);
+void ixp4xx_write_feature_bits(u32 value);
+#else
+#define cpu_is_ixp42x_rev_a0() 0
+#define cpu_is_ixp42x() 0
+#define cpu_is_ixp43x() 0
+#define cpu_is_ixp46x() 0
+static inline u32 ixp4xx_read_feature_bits(void)
+{
+ return 0;
+}
+static inline void ixp4xx_write_feature_bits(u32 value)
+{
+}
+#endif
+
+#endif /* _ASM_ARCH_CPU_H */
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index fc9250f..aa840ed 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -611,12 +611,6 @@
#define EXYNOS5420_FSYS2_OPTION 0x4168
#define EXYNOS5420_PSGEN_OPTION 0x4188
-/* For EXYNOS_CENTRAL_SEQ_OPTION */
-#define EXYNOS5_USE_STANDBYWFI_ARM_CORE0 BIT(16)
-#define EXYNOS5_USE_STANDBYWFI_ARM_CORE1 BUT(17)
-#define EXYNOS5_USE_STANDBYWFE_ARM_CORE0 BIT(24)
-#define EXYNOS5_USE_STANDBYWFE_ARM_CORE1 BIT(25)
-
#define EXYNOS5420_ARM_USE_STANDBY_WFI0 BIT(4)
#define EXYNOS5420_ARM_USE_STANDBY_WFI1 BIT(5)
#define EXYNOS5420_ARM_USE_STANDBY_WFI2 BIT(6)
diff --git a/include/memory/renesas-rpc-if.h b/include/memory/renesas-rpc-if.h
index 14cfd03..e3e770f 100644
--- a/include/memory/renesas-rpc-if.h
+++ b/include/memory/renesas-rpc-if.h
@@ -19,7 +19,7 @@
RPCIF_DATA_OUT,
};
-struct rpcif_op {
+struct rpcif_op {
struct {
u8 buswidth;
u8 opcode;
@@ -57,7 +57,7 @@
} data;
};
-struct rpcif {
+struct rpcif {
struct device *dev;
void __iomem *dirmap;
struct regmap *regmap;
@@ -76,7 +76,7 @@
u32 ddr; /* DRDRENR or SMDRENR */
};
-int rpcif_sw_init(struct rpcif *rpc, struct device *dev);
+int rpcif_sw_init(struct rpcif *rpc, struct device *dev);
void rpcif_hw_init(struct rpcif *rpc, bool hyperflash);
void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
size_t *len);
diff --git a/include/soc/imx/cpu.h b/include/soc/imx/cpu.h
index 42d6aeb..0bf610a 100644
--- a/include/soc/imx/cpu.h
+++ b/include/soc/imx/cpu.h
@@ -9,6 +9,7 @@
#define MXC_CPU_MX27 27
#define MXC_CPU_MX31 31
#define MXC_CPU_MX35 35
+#define MXC_CPU_MX50 50
#define MXC_CPU_MX51 51
#define MXC_CPU_MX53 53
#define MXC_CPU_IMX6SL 0x60
diff --git a/include/soc/tegra/common.h b/include/soc/tegra/common.h
index 98027a7..af41ad8 100644
--- a/include/soc/tegra/common.h
+++ b/include/soc/tegra/common.h
@@ -6,6 +6,37 @@
#ifndef __SOC_TEGRA_COMMON_H__
#define __SOC_TEGRA_COMMON_H__
+#include <linux/errno.h>
+#include <linux/types.h>
+
+struct device;
+
+/**
+ * Tegra SoC core device OPP table configuration
+ *
+ * @init_state: pre-initialize OPP state of a device
+ */
+struct tegra_core_opp_params {
+ bool init_state;
+};
+
+#ifdef CONFIG_ARCH_TEGRA
bool soc_is_tegra(void);
+int devm_tegra_core_dev_init_opp_table(struct device *dev,
+ struct tegra_core_opp_params *params);
+#else
+static inline bool soc_is_tegra(void)
+{
+ return false;
+}
+
+static inline int
+devm_tegra_core_dev_init_opp_table(struct device *dev,
+ struct tegra_core_opp_params *params)
+{
+ return -ENODEV;
+}
+#endif
+
#endif /* __SOC_TEGRA_COMMON_H__ */
diff --git a/include/soc/tegra/fuse.h b/include/soc/tegra/fuse.h
index 78cbc78..990701f 100644
--- a/include/soc/tegra/fuse.h
+++ b/include/soc/tegra/fuse.h
@@ -52,14 +52,28 @@
enum tegra_revision revision;
};
+#ifdef CONFIG_ARCH_TEGRA
+extern struct tegra_sku_info tegra_sku_info;
u32 tegra_read_straps(void);
u32 tegra_read_ram_code(void);
int tegra_fuse_readl(unsigned long offset, u32 *value);
-
-#ifdef CONFIG_ARCH_TEGRA
-extern struct tegra_sku_info tegra_sku_info;
#else
static struct tegra_sku_info tegra_sku_info __maybe_unused;
+
+static inline u32 tegra_read_straps(void)
+{
+ return 0;
+}
+
+static inline u32 tegra_read_ram_code(void)
+{
+ return 0;
+}
+
+static inline int tegra_fuse_readl(unsigned long offset, u32 *value)
+{
+ return -ENODEV;
+}
#endif
struct device *tegra_soc_device_register(void);
diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h
index d2fbe6a..e19c250 100644
--- a/include/soc/tegra/mc.h
+++ b/include/soc/tegra/mc.h
@@ -10,6 +10,7 @@
#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/interconnect-provider.h>
+#include <linux/irq.h>
#include <linux/reset-controller.h>
#include <linux/types.h>
@@ -17,34 +18,48 @@
struct device;
struct page;
-struct tegra_smmu_enable {
- unsigned int reg;
- unsigned int bit;
-};
-
struct tegra_mc_timing {
unsigned long rate;
u32 *emem_data;
};
-/* latency allowance */
-struct tegra_mc_la {
- unsigned int reg;
- unsigned int shift;
- unsigned int mask;
- unsigned int def;
-};
-
struct tegra_mc_client {
unsigned int id;
const char *name;
- unsigned int swgroup;
+ /*
+ * For Tegra210 and earlier, this is the SWGROUP ID used for IOVA translations in the
+ * Tegra SMMU, whereas on Tegra186 and later this is the ID used to override the ARM SMMU
+ * stream ID used for IOVA translations for the given memory client.
+ */
+ union {
+ unsigned int swgroup;
+ unsigned int sid;
+ };
unsigned int fifo_size;
- struct tegra_smmu_enable smmu;
- struct tegra_mc_la la;
+ struct {
+ /* Tegra SMMU enable (Tegra210 and earlier) */
+ struct {
+ unsigned int reg;
+ unsigned int bit;
+ } smmu;
+
+ /* latency allowance */
+ struct {
+ unsigned int reg;
+ unsigned int shift;
+ unsigned int mask;
+ unsigned int def;
+ } la;
+
+ /* stream ID overrides (Tegra186 and later) */
+ struct {
+ unsigned int override;
+ unsigned int security;
+ } sid;
+ } regs;
};
struct tegra_smmu_swgroup {
@@ -155,6 +170,19 @@
void *data);
};
+struct tegra_mc_ops {
+ /*
+ * @probe: Callback to set up SoC-specific bits of the memory controller. This is called
+ * after basic, common set up that is done by the SoC-agnostic bits.
+ */
+ int (*probe)(struct tegra_mc *mc);
+ void (*remove)(struct tegra_mc *mc);
+ int (*suspend)(struct tegra_mc *mc);
+ int (*resume)(struct tegra_mc *mc);
+ irqreturn_t (*handle_irq)(int irq, void *data);
+ int (*probe_device)(struct tegra_mc *mc, struct device *dev);
+};
+
struct tegra_mc_soc {
const struct tegra_mc_client *clients;
unsigned int num_clients;
@@ -176,8 +204,7 @@
unsigned int num_resets;
const struct tegra_mc_icc_ops *icc_ops;
-
- int (*init)(struct tegra_mc *mc);
+ const struct tegra_mc_ops *ops;
};
struct tegra_mc {
@@ -218,4 +245,6 @@
}
#endif
+int tegra_mc_probe_device(struct tegra_mc *mc, struct device *dev);
+
#endif /* __SOC_TEGRA_MC_H__ */
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index 361cb64..d186bcc 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -171,6 +171,8 @@
void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);
+bool tegra_pmc_core_domain_state_synced(void);
+
#else
static inline int tegra_powergate_power_on(unsigned int id)
{
@@ -227,6 +229,11 @@
{
}
+static inline bool tegra_pmc_core_domain_state_synced(void)
+{
+ return false;
+}
+
#endif /* CONFIG_SOC_TEGRA_PMC */
#if defined(CONFIG_SOC_TEGRA_PMC) && defined(CONFIG_PM_SLEEP)
diff --git a/init/Makefile b/init/Makefile
index 6bc37f6..2846113 100644
--- a/init/Makefile
+++ b/init/Makefile
@@ -27,11 +27,11 @@
# mkcompile_h will make sure to only update the
# actual file if its content has changed.
- chk_compile.h = :
- quiet_chk_compile.h = echo ' CHK $@'
-silent_chk_compile.h = :
-include/generated/compile.h: FORCE
- @$($(quiet)chk_compile.h)
- $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
+quiet_cmd_compile.h = CHK $@
+ cmd_compile.h = \
+ $(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" \
"$(CONFIG_PREEMPT_RT)" $(CONFIG_CC_VERSION_TEXT) "$(LD)"
+
+include/generated/compile.h: FORCE
+ $(call cmd,compile.h)
diff --git a/kernel/gen_kheaders.sh b/kernel/gen_kheaders.sh
index 34a1dc2..1966a74 100755
--- a/kernel/gen_kheaders.sh
+++ b/kernel/gen_kheaders.sh
@@ -56,9 +56,7 @@
exit
fi
-if [ "${quiet}" != "silent_" ]; then
- echo " GEN $tarfile"
-fi
+echo " GEN $tarfile"
rm -rf $cpio_dir
mkdir $cpio_dir
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 2987925..83a931c 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -414,8 +414,8 @@
If unsure, say Y.
-config DEBUG_FORCE_FUNCTION_ALIGN_32B
- bool "Force all function address 32B aligned" if EXPERT
+config DEBUG_FORCE_FUNCTION_ALIGN_64B
+ bool "Force all function address 64B aligned" if EXPERT
help
There are cases that a commit from one domain changes the function
address alignment of other domains, and cause magic performance
diff --git a/mm/percpu-km.c b/mm/percpu-km.c
index c9d529d..fe31aa1 100644
--- a/mm/percpu-km.c
+++ b/mm/percpu-km.c
@@ -32,6 +32,12 @@
#include <linux/log2.h>
+static void pcpu_post_unmap_tlb_flush(struct pcpu_chunk *chunk,
+ int page_start, int page_end)
+{
+ /* nothing */
+}
+
static int pcpu_populate_chunk(struct pcpu_chunk *chunk,
int page_start, int page_end, gfp_t gfp)
{
diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c
index ee5d89f..2054c92 100644
--- a/mm/percpu-vm.c
+++ b/mm/percpu-vm.c
@@ -303,6 +303,9 @@
* For each cpu, depopulate and unmap pages [@page_start,@page_end)
* from @chunk.
*
+ * Caller is required to call pcpu_post_unmap_tlb_flush() if not returning the
+ * region back to vmalloc() which will lazily flush the tlb.
+ *
* CONTEXT:
* pcpu_alloc_mutex.
*/
@@ -324,8 +327,6 @@
pcpu_unmap_pages(chunk, pages, page_start, page_end);
- /* no need to flush tlb, vmalloc will handle it lazily */
-
pcpu_free_pages(chunk, pages, page_start, page_end);
}
diff --git a/mm/percpu.c b/mm/percpu.c
index b4cebec..7f2e015 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1572,6 +1572,7 @@
*
* pcpu_populate_chunk - populate the specified range of a chunk
* pcpu_depopulate_chunk - depopulate the specified range of a chunk
+ * pcpu_post_unmap_tlb_flush - flush tlb for the specified range of a chunk
* pcpu_create_chunk - create a new chunk
* pcpu_destroy_chunk - destroy a chunk, always preceded by full depop
* pcpu_addr_to_page - translate address to physical address
@@ -1581,6 +1582,8 @@
int page_start, int page_end, gfp_t gfp);
static void pcpu_depopulate_chunk(struct pcpu_chunk *chunk,
int page_start, int page_end);
+static void pcpu_post_unmap_tlb_flush(struct pcpu_chunk *chunk,
+ int page_start, int page_end);
static struct pcpu_chunk *pcpu_create_chunk(gfp_t gfp);
static void pcpu_destroy_chunk(struct pcpu_chunk *chunk);
static struct page *pcpu_addr_to_page(void *addr);
@@ -2137,11 +2140,12 @@
{
struct pcpu_chunk *chunk;
struct pcpu_block_md *block;
+ int freed_page_start, freed_page_end;
int i, end;
+ bool reintegrate;
lockdep_assert_held(&pcpu_lock);
-restart:
/*
* Once a chunk is isolated to the to_depopulate list, the chunk is no
* longer discoverable to allocations whom may populate pages. The only
@@ -2157,6 +2161,9 @@
* Scan chunk's pages in the reverse order to keep populated
* pages close to the beginning of the chunk.
*/
+ freed_page_start = chunk->nr_pages;
+ freed_page_end = 0;
+ reintegrate = false;
for (i = chunk->nr_pages - 1, end = -1; i >= 0; i--) {
/* no more work to do */
if (chunk->nr_empty_pop_pages == 0)
@@ -2164,8 +2171,8 @@
/* reintegrate chunk to prevent atomic alloc failures */
if (pcpu_nr_empty_pop_pages < PCPU_EMPTY_POP_PAGES_HIGH) {
- pcpu_reintegrate_chunk(chunk);
- goto restart;
+ reintegrate = true;
+ goto end_chunk;
}
/*
@@ -2194,16 +2201,29 @@
spin_lock_irq(&pcpu_lock);
pcpu_chunk_depopulated(chunk, i + 1, end + 1);
+ freed_page_start = min(freed_page_start, i + 1);
+ freed_page_end = max(freed_page_end, end + 1);
/* reset the range and continue */
end = -1;
}
- if (chunk->free_bytes == pcpu_unit_size)
+end_chunk:
+ /* batch tlb flush per chunk to amortize cost */
+ if (freed_page_start < freed_page_end) {
+ spin_unlock_irq(&pcpu_lock);
+ pcpu_post_unmap_tlb_flush(chunk,
+ freed_page_start,
+ freed_page_end);
+ cond_resched();
+ spin_lock_irq(&pcpu_lock);
+ }
+
+ if (reintegrate || chunk->free_bytes == pcpu_unit_size)
pcpu_reintegrate_chunk(chunk);
else
- list_move(&chunk->list,
- &pcpu_chunk_lists[pcpu_sidelined_slot]);
+ list_move_tail(&chunk->list,
+ &pcpu_chunk_lists[pcpu_sidelined_slot]);
}
}
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 82dd1b6..f247e69 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -90,8 +90,13 @@
echo-cmd = $(if $($(quiet)cmd_$(1)),\
echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
+# sink stdout for 'make -s'
+ redirect :=
+ quiet_redirect :=
+silent_redirect := exec >/dev/null;
+
# printing commands
-cmd = @set -e; $(echo-cmd) $(cmd_$(1))
+cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(cmd_$(1))
###
# if_changed - execute command if any prerequisite is newer than
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 34d2576..10b2f23 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -219,7 +219,6 @@
ifdef CONFIG_STACK_VALIDATION
ifndef CONFIG_LTO_CLANG
-ifneq ($(SKIP_STACK_VALIDATION),1)
__objtool_obj := $(objtree)/tools/objtool/objtool
@@ -233,7 +232,6 @@
$(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
$(__objtool_obj))
-endif # SKIP_STACK_VALIDATION
endif # CONFIG_LTO_CLANG
endif # CONFIG_STACK_VALIDATION
diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index a7883e45..5e9b805 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -39,12 +39,10 @@
# so let's now process the prelinked binary before we link the module.
ifdef CONFIG_STACK_VALIDATION
-ifneq ($(SKIP_STACK_VALIDATION),1)
cmd_ld_ko_o += \
$(objtree)/tools/objtool/objtool $(objtool_args) \
$(@:.ko=$(prelink-ext).o);
-endif # SKIP_STACK_VALIDATION
endif # CONFIG_STACK_VALIDATION
endif # CONFIG_LTO_CLANG
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index bfa1ea8..5d84b44 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -678,7 +678,7 @@
check_conf(child);
}
-static struct option long_opts[] = {
+static const struct option long_opts[] = {
{"help", no_argument, NULL, 'h'},
{"silent", no_argument, NULL, 's'},
{"oldaskconfig", no_argument, &input_mode_opt, oldaskconfig},
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 475faa1..36ef7b3 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -38,9 +38,7 @@
# Will be supressed by "make -s"
info()
{
- if [ "${quiet}" != "silent_" ]; then
- printf " %-7s %s\n" "${1}" "${2}"
- fi
+ printf " %-7s %s\n" "${1}" "${2}"
}
# Generate a linker script to ensure correct ordering of initcalls.
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 4ae7350..6a2a04d 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -9,8 +9,6 @@
CC_VERSION="$6"
LD=$7
-vecho() { [ "${quiet}" = "silent_" ] || echo "$@" ; }
-
# Do not expand names
set -f
@@ -70,19 +68,27 @@
# Only replace the real compile.h if the new one is different,
# in order to preserve the timestamp and avoid unnecessary
# recompilations.
-# We don't consider the file changed if only the date/time changed.
+# We don't consider the file changed if only the date/time changed,
+# unless KBUILD_BUILD_TIMESTAMP was explicitly set (e.g. for
+# reproducible builds with that value referring to a commit timestamp).
# A kernel config change will increase the generation number, thus
# causing compile.h to be updated (including date/time) due to the
# changed comment in the
# first line.
+if [ -z "$KBUILD_BUILD_TIMESTAMP" ]; then
+ IGNORE_PATTERN="UTS_VERSION"
+else
+ IGNORE_PATTERN="NOT_A_PATTERN_TO_BE_MATCHED"
+fi
+
if [ -r $TARGET ] && \
- grep -v 'UTS_VERSION' $TARGET > .tmpver.1 && \
- grep -v 'UTS_VERSION' .tmpcompile > .tmpver.2 && \
+ grep -v $IGNORE_PATTERN $TARGET > .tmpver.1 && \
+ grep -v $IGNORE_PATTERN .tmpcompile > .tmpver.2 && \
cmp -s .tmpver.1 .tmpver.2; then
rm -f .tmpcompile
else
- vecho " UPD $TARGET"
+ echo " UPD $TARGET"
mv -f .tmpcompile $TARGET
fi
rm -f .tmpver.1 .tmpver.2
diff --git a/scripts/mkmakefile b/scripts/mkmakefile
deleted file mode 100755
index 1cb1747..0000000
--- a/scripts/mkmakefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-# Generates a small Makefile used in the root of the output
-# directory, to allow make to be started from there.
-# The Makefile also allow for more convinient build of external modules
-
-# Usage
-# $1 - Kernel src directory
-
-if [ "${quiet}" != "silent_" ]; then
- echo " GEN Makefile"
-fi
-
-cat << EOF > Makefile
-# Automatically generated by $0: don't edit
-include $1/Makefile
-EOF
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 3e623cc..270a7df 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -660,8 +660,11 @@
unsigned int crc;
if (sym->st_shndx == SHN_UNDEF) {
- warn("EXPORT symbol \"%s\" [%s%s] version generation failed, symbol will not be versioned.\n",
- symname, mod->name, mod->is_vmlinux ? "" : ".ko");
+ warn("EXPORT symbol \"%s\" [%s%s] version ...\n"
+ "Is \"%s\" prototyped in <asm/asm-prototypes.h>?\n",
+ symname, mod->name, mod->is_vmlinux ? "" : ".ko",
+ symname);
+
return;
}
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index db941f6..151f049 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -59,32 +59,19 @@
fi
# If we are past a tagged commit (like
# "v2.6.30-rc5-302-g72357d5"), we pretty print it.
- #
- # Ensure the abbreviated sha1 has exactly 12
- # hex characters, to make the output
- # independent of git version, local
- # core.abbrev settings and/or total number of
- # objects in the current repository - passing
- # --abbrev=12 ensures a minimum of 12, and the
- # awk substr() then picks the 'g' and first 12
- # hex chars.
- if atag="$(git describe --abbrev=12 2>/dev/null)"; then
- echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),substr($(NF),0,13))}'
-
- # If we don't have a tag at all we print -g{commitish},
- # again using exactly 12 hex chars.
- else
- head="$(echo $head | cut -c1-12)"
- printf '%s%s' -g $head
+ if atag="$(git describe 2>/dev/null)"; then
+ echo "$atag" | awk -F- '{printf("-%05d", $(NF-1))}'
fi
- fi
- # Is this git on svn?
- if git config --get svn-remote.svn.url >/dev/null; then
- printf -- '-svn%s' "$(git svn find-rev $head)"
+ # Add -g and exactly 12 hex chars.
+ printf '%s%s' -g "$(echo $head | cut -c1-12)"
fi
# Check for uncommitted changes.
+ # This script must avoid any write attempt to the source tree,
+ # which might be read-only.
+ # You cannot use 'git describe --dirty' because it tries to
+ # create .git/index.lock .
# First, with git-status, but --no-optional-locks is only
# supported in git >= 2.14, so fall back to git-diff-index if
# it fails. Note that git-diff-index does not refresh the
@@ -93,45 +80,9 @@
if {
git --no-optional-locks status -uno --porcelain 2>/dev/null ||
git diff-index --name-only HEAD
- } | grep -qvE '^(.. )?scripts/package'; then
+ } | read dummy; then
printf '%s' -dirty
fi
-
- # All done with git
- return
- fi
-
- # Check for mercurial and a mercurial repo.
- if test -d .hg && hgid=$(hg id 2>/dev/null); then
- # Do we have an tagged version? If so, latesttagdistance == 1
- if [ "$(hg log -r . --template '{latesttagdistance}')" = "1" ]; then
- id=$(hg log -r . --template '{latesttag}')
- printf '%s%s' -hg "$id"
- else
- tag=$(printf '%s' "$hgid" | cut -d' ' -f2)
- if [ -z "$tag" -o "$tag" = tip ]; then
- id=$(printf '%s' "$hgid" | sed 's/[+ ].*//')
- printf '%s%s' -hg "$id"
- fi
- fi
-
- # Are there uncommitted changes?
- # These are represented by + after the changeset id.
- case "$hgid" in
- *+|*+\ *) printf '%s' -dirty ;;
- esac
-
- # All done with mercurial
- return
- fi
-
- # Check for svn and a svn repo.
- if rev=$(LC_ALL=C svn info 2>/dev/null | grep '^Last Changed Rev'); then
- rev=$(echo $rev | awk '{print $NF}')
- printf -- '-svn%s' "$rev"
-
- # All done with svn
- return
fi
}
@@ -180,15 +131,13 @@
if test "$CONFIG_LOCALVERSION_AUTO" = "y"; then
# full scm version string
res="$res$(scm_version)"
-else
+elif [ -z "${LOCALVERSION}" ]; then
# append a plus sign if the repository is not in a clean
# annotated or signed tagged state (as git describe only
# looks at signed or annotated tags - git tag -a/-s) and
# LOCALVERSION= is not specified
- if test "${LOCALVERSION+set}" != "set"; then
- scm=$(scm_version --short)
- res="$res${scm:++}"
- fi
+ scm=$(scm_version --short)
+ res="$res${scm:++}"
fi
echo "$res"
diff --git a/scripts/syscallhdr.sh b/scripts/syscallhdr.sh
index 848ac27..22e34cd 100755
--- a/scripts/syscallhdr.sh
+++ b/scripts/syscallhdr.sh
@@ -69,7 +69,7 @@
sed -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
-e 's/[^A-Z0-9_]/_/g' -e 's/__/_/g')
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+$abis" "$infile" | sort -n | {
+grep -E "^[0-9A-Fa-fXx]+[[:space:]]+$abis" "$infile" | {
echo "#ifndef $guard"
echo "#define $guard"
echo
diff --git a/scripts/syscallnr.sh b/scripts/syscallnr.sh
new file mode 100644
index 0000000..3aa29e0
--- /dev/null
+++ b/scripts/syscallnr.sh
@@ -0,0 +1,74 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Generate a syscall number header.
+#
+# Each line of the syscall table should have the following format:
+#
+# NR ABI NAME [NATIVE] [COMPAT]
+#
+# NR syscall number
+# ABI ABI name
+# NAME syscall name
+# NATIVE native entry point (optional)
+# COMPAT compat entry point (optional)
+set -e
+
+usage() {
+ echo >&2 "usage: $0 [--abis ABIS] [--prefix PREFIX] INFILE OUTFILE" >&2
+ echo >&2
+ echo >&2 " INFILE input syscall table"
+ echo >&2 " OUTFILE output header file"
+ echo >&2
+ echo >&2 "options:"
+ echo >&2 " --abis ABIS ABI(s) to handle (By default, all lines are handled)"
+ echo >&2 " --prefix PREFIX The prefix to the macro like __NR_<PREFIX><NAME>"
+ exit 1
+}
+
+# default unless specified by options
+abis=
+prefix=
+
+while [ $# -gt 0 ]
+do
+ case $1 in
+ --abis)
+ abis=$(echo "($2)" | tr ',' '|')
+ shift 2;;
+ --prefix)
+ prefix=$2
+ shift 2;;
+ -*)
+ echo "$1: unknown option" >&2
+ usage;;
+ *)
+ break;;
+ esac
+done
+
+if [ $# -ne 2 ]; then
+ usage
+fi
+
+infile="$1"
+outfile="$2"
+
+guard=_ASM_$(basename "$outfile" |
+ sed -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
+ -e 's/[^A-Z0-9_]/_/g' -e 's/__/_/g')
+
+grep -E "^[0-9A-Fa-fXx]+[[:space:]]+$abis" "$infile" | sort -n | {
+ echo "#ifndef $guard"
+ echo "#define $guard"
+ echo
+
+ max=0
+ while read nr abi name native compat ; do
+ max=$nr
+ done
+
+ echo "#define __NR_${prefix}syscalls $(($max + 1))"
+ echo
+ echo "#endif /* $guard */"
+} > "$outfile"
diff --git a/scripts/syscalltbl.sh b/scripts/syscalltbl.sh
index aa6ab15..6abe143 100755
--- a/scripts/syscalltbl.sh
+++ b/scripts/syscalltbl.sh
@@ -52,10 +52,15 @@
nxt=0
-grep -E "^[0-9]+[[:space:]]+$abis" "$infile" | sort -n | {
+grep -E "^[0-9]+[[:space:]]+$abis" "$infile" | {
while read nr abi name native compat ; do
+ if [ $nxt -gt $nr ]; then
+ echo "error: $infile: syscall table is not sorted or duplicates the same syscall number" >&2
+ exit 1
+ fi
+
while [ $nxt -lt $nr ]; do
echo "__SYSCALL($nxt, sys_ni_syscall)"
nxt=$((nxt + 1))
